Specifications - Complete Plumbing Source

Specifications
There is more than 1 version of this model.
Page down to identify the version you have.
FAUCET DESCRIPTION
•
•
•
•
•
Metal construction with various finishes identified by suffix
Hydrolock® quick connect installation
Flush button with raised stream and spray indicators
Pullout spray with 59" fiber hose
Flexible supplies with 3/8” compression fittings
OPERATION
•
•
•
•
•
Lever style handle
Temperature controlled by 100˚ arc of handle travel
Spout receptor rotation is 120˚
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pullout or retracted position
Extensa®
FLOW
•
Flow is limited to 2.2 gpm (8.3 L/min) at 60 psi
Single Control Kitchen Faucet
w/Pullout Spray
CARTRIDGE
•
1255™ Duralast™ cartridge
STANDARDS
•
•
•
Third party certified to ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF 61/9
Complies with California Proposition 65 and with the Federal Safe Water
Drinking Act
The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
• ADA
Models: 7560 series
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/2” (38mm) DIA.
for lever handle
WARRANTY
•
•
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
10-1/2"
(266mm)
10-3/4"
(273mm)
10-1/2"
(265mm)
8"
(203mm)
1-1/4"(32mm) Dia.
Minimum
Mounting Hole
2-1/8"(54mm)
Max. Deck Thickness
Deck Esc.
Deck Escutcheon
10-7/16" x 2-7/16" wide
(265mm x 62mm)
2-3/8" (60mm)
Escutcheon Dia.
2-1/2"(64mm)
Max. Deck Thickness
Single Mount Esc.
28-1/2"
(724mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 9/10
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Specifications
FAUCET DESCRIPTION
•
•
•
•
•
•
Metal construction with various finishes identified by suffix
Hydrolock® quick connect installation
Flush button with raised stream and spray indicators
Pullout spray with 59" fiber hose
1/2” IPS connections will accept standard ball nose connection for 3/8”tubing
Chrome liquid dispenser included with 87560CSD
OPERATION
•
•
•
•
•
Lever style handle
Temperature controlled by 180˚ arc of handle travel
Spout receptor rotation is 120˚
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pullout or retracted position
Extensa®
FLOW
•
Flow is limited to 2.2 gpm (8.3 L/min) at 60 psi
Single Control Kitchen Faucet
w/Pullout Spray
CARTRIDGE
•
•
1225 cartridge design
Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
•
•
Models: 7560 series
87560 series
Designed and manufactured to comply with the requirements of:
CSA B-125.1, ASME A112.18.1, IAPMO PS 49-92, NSF 61 Section 9,
California Proposition 65, ICC A117.1
The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
• ADA
DISCONTINUED MODELS: 7560, 7560CS,
7560CBL, 87560C, 87560S, 87560SLBL, 87560CS,
87560CBL, 87560
for lever handle
WARRANTY
•
•
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/4” (32mm) DIA.
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
10-1/2"
(266mm)
10-3/4"
(273mm)
10-1/2"
(265mm)
3-5/16"
(83mm)
1-1/4"(32mm) Dia.
Minimum
Mounting Hole
Deck Escutcheon
10-7/16" x 2-7/16" wide
(265mm x 62mm)
2-1/8"(54mm)
Max. Deck Thickness
Deck Esc.
2-3/8" (60mm)
Escutcheon Dia.
2-1/2"(64mm)
Max. Deck Thickness
Single Mount Esc.
For 8"(203mm)
Mounting
Hot
2-5/8"
(66mm)
8"
(203mm)
2"
(50mm)
1/4" (6mm)
Threaded Dia.
18 NPSM
3/8" (10mm)
Supply Tubes
16"
(406mm)
9-7/8"
(250mm)
Cold
1/2" IPS
Connection
3 Hole, 4" o.c. Installation
Flexible
Metal Hose
Single Hole Installation
Counter Weight
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 9/10
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com