Hi-Fi AUDIO COMPONENTS 2012 / 2013

Transcription

www.denonasia.com
H i - Fi AU D I O COMPONEN TS
2 012 / 2 013
D&M Holdings,Inc
D&M Building, 2-1 Nisshin-cho,
kawasaki-ku, Kawasaki-shi,
Kanagawa, 210-8569,
Japan
D&M Electronics Singapore Pte Ltd.
438A, Alexandra Road , Block A, #01-09,
Alexandra TechnoPark,
Singapore 119967
www.denonsingapore.com
www.denonasia.com
Vividly brings out the essence of
the music residing in the details.
Audio professionals and music lovers are all alike: continuing in search of the new possibilities in technology
to deliver the reproduction of the artist’s vision with purity and details in playback of the recorded music. For
over 100 years, it has been the mission of Denon in fulfilling their journey. Whether it is a 1960’s record player
phono cartridge that is still popular today, the start of PCM digital recording in 1972, or UHC-MOS single pushpull circuits and ALPHA Processing today, Denon has been consistently in producing the audio components to
please the discriminating ears of the artists, recording engineers, and audiophiles for the past century.
DENON TECHNOLOGIES
CONTENTS
Ideal circuit using the UHC-MOS large current amplification element
Advanced AL 32 Processing
To achieve subtle expression with an amplifier
it is ideal for the configuration to be as simple
as possible. But to obtain large output with
a simple circuit requires an element that can
handle exceptionally large currents. Since the
development of the POA-S1, Denon has used
the UHC-MOS as the amplification element
to employ the ideal circuit configuration of a
large output amp using single push-pull. The
UHC-MOS possesses the same or higher
amplification ratio as a bipolar transistor and
In 1972, Denon was the first in the world to
develop a practical pulse-code modulation
(PCM) recording device. This digitalization
resolved many problems including noise, wow
and flutter, and frequency characteristics.
Compact disc sound, however, lost the subtle
sounds below LSB due to the bandwidth cut
of fs/2 or more from the 44.1 kHz sampling
during recording and the 16-bit quantization.
Denon took on the challenge of “reducing
the distortion caused by quantization” to
resolve this remaining digital audio issue and
developed Adaptive Line Pattern Harmonized
Algorithm (ALPHA) processing to reproduce
20-bit quality from 16-bit data, which became
cherished by listeners around the world.
Direct Mechanical Ground Construction
Super Audio CD Player
DCD-2020AE ...................... P3
with a single element can handle 35 times the
electrical current linearity as general MOSFET and 3 times that of a bipolar transistor.
Together with the ability to reproduce subtle
sound quality of MOS-FET, UHC-MOS can
also handle the complete range from the faint
tones in a violin solo to the huge reverberating
sound of a full orchestra.
Output current (A)
UHC-MOS signal
Bipolar transistor X 3
MOS-FET X 3
Bipolar transistor signal
MOS-FET signal
In time this evolved into 24-bit quality AL24
Processing that supports high-bit and highsampling, and then into AL24 Processing
Plus that supports 192 kHz sampling. Further,
high-speed signal processing technology was
used to develop Advanced ALPHA Processing
to expand the volume of information in the
time axis. The number of bits also evolved
from the 24 to 32.
Conventional system
AL24 Processor
Input voltage (V)
Ultra High Current (UHC) - MOS FET
1
Comparison of amplification element
1 kHz, -90 dB sine wave reproduction
waveform (CD playback)
Eliminating unnecessary external vibrations
and the minute vibrations of the element
itself is indispensable for audio components
to produce high-quality sound. This can be
done by being very careful how the power
transformer, a source of vibration, is mounted
by increasing the number of plates used
to reinforce the mounting or employing a
floating mount that uses multiple damping
materials. The power transformer mounting
position can also be moved directly over
the foot to thoroughly suppress noise and
the transmission of unnecessary vibration
to achieve
clear sound
localization.
DCD-1510AE ....................... P5
CD Player
DCD-720AE ........................ P7
DCD-520AE ........................ P9
Integrated Amplifier
PMA-2020AE ...................... P4
PMA-1510AE ....................... P6
PMA-720AE ........................ P8
PMA-520AE ....................... P10
Network Audio Player
DNP-720AE ....................... P11
Other Products
....................................... P12-14
2
Super Audio CD player that lets you enjoy not only CDs
but also sound sources from a PC or portable audio device
such as an iPhone in high audio quality
Further-improved Advanced UHC-MOS Single Push-Pull Circuit,
and the strengthened power circuit masterfully reproduces
delicate musical details on a powerful, rock-solid foundation
Premium Silver
DCD-2020AE
Advanced AL32 Processing to
dramatically enhance the music
listening experience
D e n o n’s A d v a n c e d A L 3 2 P r o c e s s o r
expands audio data to 32 bits and uses a
proprietary algorithm to interpolate the data
and perform up-conversion and sampling,
achieving a playback sound that is close to
the original source. In addition, the use of
algorithms ideal for frequency characteristics
outside the audible range to filter sudden
bursts of musical data or continuous sound
at high frequencies protects sound quality
from the adverse effects of aliasing noise
or drops in high-range response. The
Advanced AL32 Processor reproduces the
delicate nuances of music, as well as spatial
information such as the position of the artist
and the breadth, height, and depth of the
stage, in a more natural manner.
PMA-2020AE
High-precision 192 kHz / 32-bit D/A converter
have been used to bring out the maximum
per formance of the Advanced AL32
Processor. The D/A converter transmits
dif ferential output to each channel to
improve sound quality during playback.
DAC Master Clock Design to achieve
accurate D/A conversion with minimal
time axis jitter
The vibration generated by high-speed
rotation during disc playback has been
reduced by shortening the shaft, and using
a long-life brushless motor. Misalignment
of the laser beam axis and the angle of the
turntable or pickup mechanism base affect
disc reading accuracy. To eliminate such
mechanical variations and ensure maximum
accuracy and playability in signal playback,
corrections have been made for each unit
individually. A new, vibration-absorbing
aluminium die cast disc tray has also been
adopted for the DCD-2020AE.
Play various types of digital content
in high sound quality
Employs a large-current UHC-MOS for
amplifier element to configure an ideal
circuit that is both a simple push-pull circuit
and one that is capable of high-power
output. The UHC-MOS in this amplifier
is of a new type that provides greater
current capacity and represents the heart
of the Advanced UHC-MOS Single PushPull Circuit that has vastly improved the
power amp block and power supply block
circuit configuration. The original sound is
now reproduced with a highly transparent,
realistic quality.
Digital In / Out board
Optical and coaxial digital inputs
With the digital inputs, you can use the DCD-2020AE
signals and sampling frequencies of 32 - 192 kHz.)
Rear USB-B input, for high-resolution
sound from a PC
Equipped with a USB-B input to let you enjoy
audio files stored on a PC, and the DAC master
clock design ensures that the sound you hear is
jitter-free. The USB-B input format supports high
Direct Mechanical Ground
construction
Minimum Signal Path circuit
Twin Transformer for separated
digital and analog power supply
Recharging iPod even during
standby
resolution audio sources up to 192 kHz / 24-bits.
USB-A port, for connecting iPod
or USB memory
SU P E R AU D I O C D P L AY E R
3
ADVANCED UHC-MOS Single
Push-Pull Circuit for musical detail
and power
Denon’s Disc Drive Mechanism
with S.V.H. Loader
as a standalone D/A converter. (Supports PCM
New high-precision 192 kHz / 32-bit
D/A converte
Premium Silver
DCD-
New Schottky barrier diodes
A new Schottk y barrier diode with 1.5
times current supply capability compared
with the previous model has been used
in the power supply unit, improving the
expressive power of the UHC-MOS through
reduced switching noise and highly capable
power transmission thanks to high-speed
operation.
Twin transformers with Leakage
Canceling ( LC) mounts
Direct Mechanical Ground Construction
thoroughly reduces vibration
2020AE
New Ultra High Current MOS with
greater current capacity
Equipped with the latest UHC-MOS with
further expanded current capacity, boosting
peak current from 120A to 210A. A copper
plate with high heat conductivity is added
between the UHC-MOS and the radiator to
improve heat dissipation, enhance stability
in amplifier element operation, and ensure
consistent reproduction of sound quality
from minute to very large signals.
6 independent block construction
Circuits with different signal levels have been
isolated into 6 independent blocks using
1.6 mm thick steel plates. This eliminates
the adverse ef fect on sound quality of
inter ference among blocks to achieve
playback with a clear sense of space.
Large-capacity block capacitor
Highly accurate Dual FET + Cascade
Bootstrap Circuit to improve stability
A new Dual FET has been adopted for the
input stage of the power amp. This featurerich Dual FET suppresses the adverse
inf lue nce of he at change s on sound,
contributing to stable operation. Also, since
a Cascade Bootstrap Circuit has been
employed in the first stage of the differential
amplifier circuit, superior amplification with
negligible misalignment in frequency phase
is now possible.
I N T EG R AT E D A M PL I F I E R
PM A-
Large, high-grade 27 mm volume
control unit
Power direct and preout terminals
High-performance Phono
Equalizer Amp with a low-noise
FET supports MM / MC
Machined gold-plated pin jacks
for the Phono and CD inputs
2020AE
4
Super Audio CD player employs the Advanced AL32
Integrated amplifier is equipped with UHC-MOS and
Processor for high-bit, high-sampling
high-quality volume control as well as an upper model
Premium Silver
DCD-1510AE
PMA-1510AE
Equipped with the Advanced
AL32 Processor
Equipped with the Advanced AL32
Processor developed for high-end models.
This expands CD 16-bit data to 32 bits,
and an original algorithm interpolates the
data and conducts upsampling to achieve
ref ine d natural inte r polate d play back
without loss in the original data.
Original Drive Mechanism — Denon’s
core digital disc playback technology
The motor shaft was considerably shortened
to suppress the vibration generated by
high-speed rotation during Super Audio CD
playback and a long-life brushless motor is
used. The thin tray of the Suppress Vibration
Hybrid (SVH) loader constructed of hybrid
materials is also used to achieve a low
center of gravity to improve stability.
Equipped with a high-accuracy
192 kHz / 32-bit D/A converter
The unit is equipped with a 192 kHz / 32-bit
D/A converter with equivalent performance
of high-end models to go with the
Advanced AL32 Processor.
This transmits the differential output to
each channel to realize playback with even
better high-quality sound.
DAC Master Clock Design
The DAC is used as a master to supply the
clock signals to the various devices. An
oscillation circuit module that reduces the
effect of the circuit board pattern is used
in clock generation to obtain stable clock
transmission.
Black
Power section with digital and analog
circuitry isolated from transformer coils
The power supplies for the digital and
analog systems are separated starting from
having independent transformer coils to
suppress mutual interference. The blocks
on the circuit board are also independent,
the analog system power supply block is
placed close to the signal output area, and a
low impedance power supply was achieved.
Equipped with a USB terminal to
playback iPod and USB memory
devices using digital transmission
construction
Comes with a system remote
controller for operating the
Denon Component AE Series
The Advanced AL32 Processor and 32-bit
D/A converter achieve high-quality sound
playback of music files saved in an iPod,
USB memory, or other devices. The iPod
can also be charged during playback.
SU P E R AU D I O C D P L AY E R
5
Premium Silver
DCD-
UHC-MOS Single Push-Pull circuit
achieves both refinement and power
Low center of gravity and Direct
Mechanical Ground construction
The UHC-MOS is an ideal device that
possesses a current supply capability equal
to or greater than that of a bipolar transistor
and the refined expressive capability of
MOS-FET. Giving the UHC-MOS a single
p u s h -p u l l c o nf i g u r ati o n re s o l ve d th e
variability at the amplification stage. This
achieves refined expression with little
distortion in the sound as well as highpower.
The low center of gravity was attained
by lowering the power amp circuit board
mounting position and taking other
m e a su re s to su p p re s s th e ef fe c ts of
unnecessary vibration. In addition, a power
block with a left / right symmetrical twin
mono configuration is used and circuits
with different signal levels are separated
to prevent mutual interference and noise
between the circuits.
High current dynamic power supply
supports high-speed and a large
electric current
Twin transformers with Leakage
Canceling (LC) mounts
The power circuit consisting of a Schottky
barrier diode with a current capacity 1.5
times that of the previous model and a
custom high-qualit y sound c a pacitor
provides a stable current supply while fully
utilizing the UHC-MOS characteristics
Same large, high-grade 27 mm
volume control unit as in high-end
models
Uses the same large 27 mm volume control
unit with motor drive that is used in the
PMA-2010AE. The volume control unit can
be remotely controlled.
1510AE
Using a single transformer to obtain the
same capacity would increase the size of the
transformer and thus the size of the area that
generates leakage flux. The LC mount twin
transformers are placed facing in opposite
directions so that the magnetic fields cancel
out each other and reduce the leaking of
magnetic flux, which is a source of noise.
Power direct and preout terminals
High-performance Phono
Equalizer Amp with a low-noise
FET supports MM / MC
Microcomputer Stop Mode for
enjoying pure music
The signal paths have been made
thoroughly simple and straight to reduce
the introduction of noise in, and stabilize the
ground circuit at the amplification stage.
Black
PM A-
Comes with a system remote
controller for operating the
Denon Component AE Series
1510AE
6
High-performance 32-bit processing CD player with
Integrated amplifier employs an advanced HC circuit with
USB port for iPod / iPhone direct playback
carefully selected parts
Premium Silver
DCD-720AE
PMA-720AE
CD Player
Ideal analog waveform reproduction
technology AL32 Processing
D e n o n’s u n i q u e a n a l o g w a v e f o r m
reproduction technology for reducing the
distor tion generated from quantization
has evolved into AL32 Processing. This
technology reproduces 32-bit qualit y
from the 16-bit signals recorded on CDs
by interpolating the input digital data to
approximate the analog waveform.
A high-precision 192 kHz / 32-bit D/A
converter that is the same as in high-end
models is also employed to make maximum
utilization of the AL32 Processing. This
achieves natural reproduced sound with
less distortion.
More thorough DAC master clock
design and minimum signal path
circuit
Employs a clock design that uses the D/A
converter as the master. A high-precision
clock is placed next to the D/A converter
to perform highly accurate digital-analog
conversion with less jitter (clock deviation).
Further, the CD DSP unit placed close to
the D/A converter inside the unit makes the
signal path simpler and straighter to prevent
signal degradation in the circuit.
Layout separates the power supply,
digital signal processing, and analog
output block
Advanced High Current (HC) Single
Push-Pull Circuit Achieves Both
Refined and Powerful Sound
Main transformer separates the
power supplies for the audio and
control systems
The power circuit separates the digital and
analog systems. The digital power circuit
has also been minimized by supplying
power independently to the CD ser vo
and the USB. A circuit board layout that
separates the power supply, digital block,
and analog block is also used to eliminate
mutual interference.
This advanced HC single push-pull circuit
employs an HC transistor that supplies
3 times the electrical current of previous
models.
The input coupling capacitor that is subject
to large fluctuations in sound quality is
eliminated and the signal path is simplified
to achieve ver y fresh reproduction. A
dual FET with pair characteristics at the
power amplifier input stage is used to
achieve stable performance. Further, the
power supply employs a Schottky barrier
diode with 1.5 times the current capacity
of previous models to provide excellent
instantaneous current supply capability.
All this was done to achieve stable music
expression.
The power transformer uses separate coils
for the audio and control systems. The
layout separates the circuits and thoroughly
eliminates mutual interference.
Black
Upgraded high-quality sound unit
Denon utilized its many years of experience
in audio design to allow its design team
to carefully select the sound quality parts
including using a Denon custom capacitor.
Equipped with a USB terminal for
digital playing of iPods, iPhones, and
USB memory devices
An iPod, iPhone, or USB memory device can
be connected to this terminal to directly play
the music files they contain. The excellent
audio circuit in the unit conducts the analog
conversion to achieve reproduction with
better sound quality. The terminal can be
used to charge an iPod or iPhone.
C D PL AY E R
7
Premium Silver
Directly plays the iPod
The Denon Integrated Amplifier and
Network audio player can also be
controlled by the newly designed
system remote controller
Equipped with an auto standby
function to prevent forgetting to
turn the power off.
Enjoy listening to pure music in the
Pure Direct Mode AE Series
DCD-
720AE
Signal Level Divided Construction
(SLDC) separates the layout depending
on the signal properties
SLDC separates the layout depending on the
signal level to suppress mutual interference
among circuits. The signal wires are laid out
as short as possible (minimum signal path
circuit) to mitigate signal degradation and
achieve clear reproduction.
This construction directly mounts the
power transformer, a source of vibration,
to the chassis via a 1.6 mm thick steel
plate to quickly dissipate the unnecessary
vibration to the Network to suppress the
transmission of vibration to the power stage
and heat sink.
Gold-plated speaker terminals
Microcomputer Stop Mode
removes control system minute
background noise
Wide range reproduction capability
This provides wide range playing capability
that even supports the playing of Super
Audio CDs and high-sampling media.
Construction
Black
Gold-plated speaker terminals
The newly employed gold-plated speaker
The Denon CD and Network
audio player can also be
Equipped with a Phono Equalizer
Amp (MM) that can play analog
records
terminals allow switching between the two
speaker systems A and B.
turn the power off.
PM A-
720AE
8
Integrated amplifier features an Advanced HC single
Solidly designed CD player with Denon premium quality
push-pull circuit which guarantees the perfect balance
for excellent musical pleasure
between power and details
Premium Silver
DCD-520AE
PMA-520AE
CD Player
High-precision 32-bit D/A converter
Equipped with a high-precision 192 kHz /
32-bit D/A converter with a performance
comparable to that of a high-end model.
Reproduces sound with high-quality by
using differential output for each channel
the same as in high-end models.
More thorough DAC master clock
design and minimum signal path
circuit
Employs a clock design that uses the D/A
converter as the master. A high-precision
clock is placed next to the D/A converter
to perform highly accurate digital-analog
conversion with less jitter (clock deviation).
Further, the CD DSP unit placed close to
the D/A converter inside the unit makes the
signal path more simpler and straighter to
prevent signal degradation in the circuit.
Layout separates the power supply,
digital signal processing, and analog
output unit
The power circuit separates the digital and
analog systems. The digital power circuit
has also been minimized by supplying
power independently to the CD ser vo
and the USB. A circuit board layout that
separates the power supply, digital unit,
and analog unit is also used to eliminate
mutual interference.
Black
Upgraded high-quality sound device
Denon utilized its many years of experience
in audio design to allow its design team
to carefully select the sound quality parts
including using a Denon custom capacitor.
Solid Design Aluminum Front Panel
Employs an aluminum front panel with the
round design characteristic of Denon’s
component design.
Increased body rigidity suppresses the
unnecessary vibration that has a negative
effect on sound quality.
C D PL AY E R
9
Premium Silver
DCD-
Highly rigid aluminum front panel
The Denon Integrated Amplifier and
Network audio player can also be
turn the power off.
520AE
Advanced High Current (HC) Single
Push-Pull Circuit Achieves Both
Refined and Powerful Sound
Main transformer separates the
power supplies for the audio and
control systems
This advanced HC single push-pull circuit
employs an HC transistor that supplies
3 times the electrical current of previous
models.
The input coupling capacitor that is subject
to large fluctuations in sound quality is
eliminated and the signal path is simplified
to achieve ver y fresh reproduction. A
dual FET with pair characteristics at the
power amplifier input stage is used to
achieve stable performance. Further, the
power supply employs a Schottky barrier
diode with 1.5 times the current capacity
of previous models to provide excellent
instantaneous current supply capability.
All this was done to achieve stable music
expression.
The power transformer uses separate coils
for the audio and control systems. The
layout separates the circuits and thoroughly
eliminates mutual interference.
Signal Level Divided Construction
(SLDC) separates the layout depending
on the signal properties
SLDC separates the layout depending on the
signal level to suppress mutual interference
among circuits. The signal wires are laid out
as short as possible (minimum signal path
circuit) to mitigate signal degradation and
achieve clear reproduction.
Wide range reproduction capability
This provides wide range playing capability
that even supports the playing of Super
Audio CDs and high-sampling media.
Construction
This construction directly mounts the
power transformer, a source of vibration, to
the chassis via a 1.6mm thick steel plate to
quickly dissipate the unnecessary vibration
to the feet to suppress the transmission of
vibration to the power stage and heat sink.
Black
High-definition speaker terminals
Newly employs the higher quality speaker
terminals.
New higher quality speaker terminals
Microcomputer Stop Mode for
enjoying pure music
The Denon CD and Network
audio player can also be
Equipped with a Phono Equalizer
Amp (MM) that can play analog
records
turn the power off.
PM A-
520AE
10
AirPlay supporting network audio player with high-performance
Powerful Stereo Receiver with signal level divided construction for
interference free performance and convenient special features.
105 W x 2 (4 ohms)
Signal Level Divided Construction (SLDC)
play capability for DVD-Audio or Super Audio CD
Electronic source selection
switching
Video in / out terminal
RDS (RDS-EON) functions
Wide-range
DAB tuner (DRA-700AEDAB)
Multizone
A-B speaker
56-station random preset memory
(Another 56 stations for DAB station (DRA-700AEDAB)
*DRA-700AEDAB is not necessarily sold in all regions. Please contact a nearby Denon
authorized dealer for details and availability.
DRA-700AE
Stereo-Receiver AM / FM tuner with 2 x 105 W Performance
Stereo Receiver that meets all basic demands in best quality.
95 W x 2 (4 ohms)
Premium Silver
DNP-720AE
Signal Level Divided Construction (SLDC)
play capability for DVD-Audio or Super Audio CD
RDS (RDS-EON) functions
Network Audio Player
Wide-range
A-B speaker switching
56-station AM / FM random preset memory
This model is not necessarily sold in all regions. Please contact a nearby Denon
authorized dealer for details and availability.
Variety of Network functions
Plays back via a LAN music files saved in
a Digital Living Network Alliance (DLNA)
certified Network Attached Storage (NAS).
A music server such as Windows Media
Player Ver.11 can also be used to play
back music files saved in a computer.
Also supports FLAC 96/24 for high-quality
sound files that exceed the CD format.
Direct playback support for USB
memory devices and iPod
You can play back the music files in a USB
memor y device connected to the USB
terminal on the front of the unit. An iPhone
or iPod can also be connected to this
terminal to enjoy rich music playback using
digital transmission.
Internet radio function
AirPlay support
Supports AirPlay for playback of iTunes
music libraries. You can easily enjoy iTunes
music by just specifying the iTunes playback
output destination in the DNP-720AE.
iPhone, iPad, and iPod touch music can
be played back by directly connecting to
this unit without having to connect via a
computer.
Black
To Internet
With the TU-1510AE, Denon salutes the classic radio enthusiasts.
Reliability and functionality in perfection.
Design matching Integrated Amplifier for the AE series
tuning and preset operation
Audio amp
NAS
(library save)
Rotary knob, for easy
Easy-to-read dot matrix and 2-line FL display
Low-impedance output circuit for high-quality sound
remote control unit
Easy-to-use, dedicated
Preset memory for a total of 100 FM / AM stations, and
Auto preset memory for automatically scanning and storing stations that can be
received
Up to 8 alphanumerics can be stored for displaying station call letters,
nick-names, or other information.
Optical digital output terminal
This converts audio signals other than the
AM / FM tuner to linear PCM for output.
This allows system upgrades by connecting
to higher grade D/A converters, etc.
Large, organic electroluminescent
(EL) display with clear, easy-to-view
3-line display
Windows 7, iTunes
equipped computer
(library creation)
TU-1510AE
AM / FM Stereo Tuner
iPhone/iPod touch
(iTunes play, AV receiver operation)
LAN(Wi-Fi)
connection
Analog audio
connection
Multi-Disc Player with CD-R / RW playback and MP3 / WMA decoders.
Network connection diagram
CD-R / RW playback
noise shaping DAC
Wi-Fi Protected Setup (WPS)
enabled Wi-Fi function
MP3 and WMA decoders
Advanced multi level
8-times oversampling digital filter
Remote control in / out
Full selection of program playback
3-mode random playback
FM / AM tuner
N E T WO R K AU D I O P L AY E R
11
AM / FM Stereo Receiver
DNP-720SE
This allows you to listen to Internet radio
broadcasts from around the world. Use
“vTuner” radio station database to select
music from a list customized for Denon.
Denon Remote App support
Download the De non Remote A pp to
an iPhone, iPod touch or Android smart
phone s to pe r for m basic ope rations,
such as changing the source or selecting
music, by connecting that iPhone, iPod
touch or Android smart phones, via Wi-Fi
to the same network to which this unit is
connected.
DRA-500AE
DNP-
720AE
DCM-500AE
5-Disc CD-Auto changer with MP3 / WMA Playback
12
Capable Unit for True Performance
Easily enjoy analog sound
DP-300F
DP-29F
Fully Automatic Turntable
Refined exterior design
Aluminum die-cast turntable
Built-in Phono Equalizer
Fully automatic system
The cabinet is finished with a beautiful
coating of lustrous paint and is made
of 4 mm thick formed material that was
analyzed for strength and density. The
shape, including that of the straight tonearm
and the aluminum die-cast turntable, was
designed with good texture.
Hologram vibration analysis was used for
Comes with a built-in Phono Equalizer to
allow direct connection to mini component
stereo system or pre-main amp that has
only a line connection and no phono
terminal.
After selecting the record size of 30 cm
or 17 cm, with the touch of a button the
tonearm moves to play the record and
then automatically returns when playing is
finished. The one-touch operation of this
fully automatic system eliminates concerns
about scratching the record.
the approximately 5 mm thick turntable to
improve its ability to grip records.
Straight tonearm
The straight tonearm has excellent
tracing capability and optimizes cartridge
performance. In addition, the special shell
Fully automatic turntable for devotees
After selecting the record size of 30 cm or
17 cm, with the touch of a button this fully
automatic system automatically moves the
tonearm to play the record and then returns
it when playing is finished. The cartridge
can be replaced, and anti-skating, zero
balance adjustment, and other features
ensure the optimum balance of conditions
for record playback.
Premium Silver
allows users to change cartridges.
Uses a high-precision aluminum
die-cast turntable
Built-in Phono Equalizer
Premium Silver
MM cartridge included
Uses a high-quality aluminum die-cast
turntable that is precision machined and
uses inertial mass to provide stable rotation.
*This model is not necessarily sold in all regions. Please
contact a nearby Denon authorized dealer for details and
availability.
availability.
Black
Rich expression you would
expect from analog
Achieves powerful sound from
the low to the high range
DL-S1
DL-304
MC cartridge
MC cartridge
Fully automatic turntable saves record contents
Magneto coil of combined ultra fine wire made of 6 N copper
and pure gold provides wide range reproduction
directly to USB memory devices
Output voltage: 0.15 mV
DP-200USB
solid diamond
/ dyne
Easily save record libraries to a USB
memory devices
Plug a USB memory device into the USB
terminal on the front panel and just press
the START but ton and REC but ton to
easily convert the analog sound to a digital
file. There is no need to place the record
player close to the computer to edit files.
Of course, this unit can also be used as a
regular record player.
Comes with Trans Music Manager
for acquiring track No. and musical
number information
This unit comes with the Trans Music
M a n a g e r s of t wa re ( C D - R O M ) , w h i c h
d ete c ts th e u n re c o rd e d a re a s of th e
record and then divides and records the
track Numbers in batch or manually. The
track meta-data can also be collected by
accessing Gracenote ® company’s CDDB ®
server from a computer.
Built-in Phono Equalizer lets you
enjoy records using a mini system or
radio / cassette player with just a line
connection
Aluminum die-cast turntable provides a
high inertial mass for stable rotation
Premium Silver
Stylus tip: 0.07 × 0.07 mm square
Tracking force: 1.3 ± 0.2 g
Compliance: 14 × 10 - 6 cm
Dimensions: W17 × H15.5 × D21.8 mm
Weight: 7 g
solid diamond
/ dyne
DL-103
Frequency Response: 20 Hz to 45 kHz
Electrical Impedance: 14 ohms
diamond
dyne
Stylus tip: 0.2 mm square solid
Compliance: 5 × 10 - 6cm /
Dimensions: W15 × H15 × D26.8 mm
Stylus tip: 0.07 × 0.07 mm square
Compliance: 14 × 10 - 6cm
Dimensions: W17 × H15.5 × D21.8 mm
DL-103R
MC cartridge
Reliable MC. Used by
Broadcasters
availability.
New version of the
traditional 103
Utilizes the basic technology of the DL-103 and high-purity
copper 99.9999 % (6 N) for the magneto coil
Weight: 7 g
MC cartridge
Still in active use today
diamond
Dimensions: W15 × H15 × D26.8 mm
Stylus tip: 0.2 mm square solid
Compliance: 5 × 10 - 6cm / dyne
Weight: 8.5 g
Weight: 8.5 g
Black
Easy-to-use high output MC
DL-110
MC cartridge
Directly connects to the Phono (MM) terminal of an MM class
output amp that does not require a transformer or head amp
Trans Music Manager operation screen
Install this software on your computer and then use
it to divide the files, collect the track meta-data, and
convert the file format.
13
A lightweight and highly rigid vibration system achieves flat and
broad reproduction
Just plug in the USB memory device
and press the START and REC buttons.
When the record is finished, press the
REC button again to stop recording.
elliptical Solid diamond
Dimensions: W15.6 × H17.6 × D22.7 mm (when cover is up)
W15.6 × H19.8 × D22.7 mm (when cover is down)
Weight: 4.8 g
Stylus tip: 0.1 × 0.2 mm Special
Compliance: 8 ×
*Phono cartridges are not necessarily sold in all regions. Please contact a nearby
Denon authorized dealer for details and availability.
10 - 6 cm / dyne
14
Super Audio CD Player / CD Player / CD Changer
DCD-2020AE
DCD-1510AE
DCD-720AE
DCD-520AE
DCM-500AE
Technical information
Channels
Frequency range
Frequency response
Super Audio CD
-
-
-
-
-
2 Hz - 50 kHz (-3 dB)
-
-
-
113 dB
-
-
-
Signal-to-noise ratio
121 dB
117 dB
-
-
-
0.0008 %
0.0010 %
-
-
-
Below measurable
limit
Below measurable
limit
-
-
-
2 channels
2 channels
2 channels
2 channels
2 channels
Frequency range
2 Hz - 20 kHz
2 Hz - 20 kHz
2 Hz - 20 kHz
2 Hz - 20 kHz
2 Hz - 20 kHz
Frequency response
2 Hz - 20 kHz
2 Hz - 20 kHz
2 Hz - 20 kHz
2 Hz - 20 kHz
2 Hz - 20 kHz
101 dB
100 dB
100 dB
100 dB
98 dB
Dynamic range
120 dB
117 dB
112 dB
110 dB
108 dB
0.0015 %
0.0018 %
0.0028 %
0.003 %
0.003 %
Below measurable
limit
Below measurable
limit
Below measurable
limit
Below measurable
limit
Below measurable
limit
2.0 V (10 kohms)
2.0 V (10 kohms)
2.0 V (10 kohms)
2.0 V (10 kohms)
2.0 V (10 kohms)
Coaxial
0.5 Vp - p / 75 ohms
0.5 Vp - p / 75 ohms
-
-
0.5 Vp - p / 75 ohms
Optical
-15 to -21 dbm
-15 to -21 dbm
-15 to -21 dbm
-15 to -21 dbm
-15 to -21 dbm
Total harmonic distortion
(1 kHz, audible band)
Wow & flutter
Output voltage
Emission wavelength
General
-
118 dB
Channels
Digital output
2 channels
2 Hz - 100 kHz
2 Hz - 50 kHz (-3 dB)
Wow & flutter
CD
2 channels
2 Hz - 100 kHz
Dynamic range
(1 kHz, audible band)
660 nm
660 nm
660 nm
660 nm
660 nm
Power supply
AC 230 V, 50 Hz
AC 230 V, 50 Hz
AC 230 V, 50 / 60 Hz
AC 230 V, 50 / 60 Hz
AC 230 V, 50 Hz
Power consumption
33 W
(Stand-by 0.2 W)
30 W
(Standby 0.2 W)
22 W
(Stand-by 0.3 W)
13 W
(Stand-by 0.3 W)
15 W
434 × 138 × 335 mm
434 × 135 × 331 mm
434 × 107 × 273 mm
434 × 107 × 273 mm
434 × 120 × 400 mm
13.7 kg
8.0 kg
4.1 kg
4.0 kg
6.3 kg
Dimensions (W × H × D)
Weight
Features
Processer
Ports
PMA-720AE
PMA-520AE
80 W + 80 W
70 W + 70 W
50 W + 50 W
45 W + 45 W
160 W + 160 W
140 W + 140 W
85 W + 85 W
70 W + 70 W
0.01 %
0.01 %
0.01 %
0.01 %
Speaker A or B
4 ~ 16 ohms
4 ~ 16 ohms
4 ~ 16 ohms
4 ~ 16 ohms
Speaker A + B
8 ~ 16 ohms
8 ~ 16 ohms
8 ~ 16 ohms
-
Bi-Wiring
4 ~ 16 ohms
4 ~ 16 ohms
4 ~ 16 ohms
-
LINE
135 mV / 47 kohms
125 mV / 47 kohms
120 mV / 45 kohms
120 mV / 45 kohms
Phono MM
2.5 mV / 47 kohms
2.5 mV / 47 kohms
2.5 mV / 47 kohms
2.5 mV / 47 kohms
Phono MC
0.2 mV / 100 ohms
0.2 mV / 100 ohms
-
-
LINE
108 dB
(source Direct: ON)
108 dB
(source Direct: ON)
107 dB
(source Direct: ON)
105 dB
(source Direct: ON)
84 dB (5 mV input)
8 ohms
(20 Hz - 20 kHz, 8 ohms, T.H.D. 0.07%)
Rated output
power
4 ohms
(1 kHz, 4 ohms, T.H.D. 0.7%)
(rated output -3 dB, 8 ohms, 1 kHz)
SpeakerTerminal
Input sensitivity /
impedance
Signal-to-noise
ratio
Tone control
Phono MM
89 dB (5 mV input)
89 dB (5 mV input)
86 dB (5 mV input)
Phono MC
74 dB (0.5 mV input)
74 dB (0.5 mV input)
-
-
± 8 dB at 10 kHz
± 8 dB at 10 kHz
± 8 dB at 10 kHz
± 8 dB at 10 kHz
Treble
Bass
Power supply
General
Power consumption
Weight
± 8 dB at 100 Hz
± 8 dB at 100 Hz
± 8 dB at 100 Hz
± 8 dB at 100 Hz
AC 230 V, 50 / 60 Hz
AC 230 V, 50 Hz
AC 230 V, 50 / 60 Hz
AC 230 V, 50 / 60 Hz
360 W
(Standby: 0.2 W)
285 W
(Standby: 0.2 W)
200 W
(Standby: 0.3 W)
185 W
(Standby: 0.3 W)
434 × 182 × 435 mm
434 × 134 × 410 mm
434 × 121 × 308 mm
434 × 121 × 308 mm
24.4 kg
15.5 kg
7.1 kg
6.8 kg
• (Advanced)
•
-
-
•
•
•
•
•
•
•
•
•
•
•
•
Features
UHC-MOS single push pull circuit
Advanced HC-TR single push pull circuit
Circuit
LC mounted twin transformer
Wide range amplifier
-
-
•
•
-
-
•
•
•
•
•
•
•
•
-
-
-
-
-
•
-
-
Discrete power amplifier
Analogue output
1
1
1
1
1
Phono MC
Digital output
2 (Coaxial / Optical)
1 (Optical)
1 (Optical)
Phono MM
Digital input
-
-
-
-
Audio input
7
6
6
6
1
1
1
-
-
Rec output
2
2
1
1
1
-
-
-
-
Pre Out
1/1
1/1
-
Power amp direct In
•
•
-
-
•
•
•
1/1
-
-
1/1
-
1/1
1/1
-
-
3
1
•
•
•
•
•
•
•
•
•
USB-A for iPod or USB memory
Remote Terminal (In / Out)
Number of discs
CD-R / RW playback
MP3 / WMA decoder
USB-memory
(MP3 / WMA / AAC / WAV)
iPod / iPhone Direct via USB-A
SVH loader
Others
PMA-1510AE
AL32 Processing
Advanced AL 32 Processing
USB-B for PC
Playable
discs / files
PMA-2020AE
Dimmer
Random / Repeat one
A/B repeat
1
•
•
/
• •/•/•
•/•
• (Advance)
•
•
-
High current dynamic power supply
Ports
1
1
1
5
Remote Terminal (In / Out)
•
•
/
• •/-/•/•
•
•
•
•
/
• •/-/•/•
•
•
•
•
AC Outret
-/-/-/-
-/-/-/-
-
-/-
-/-
-
-
-
•
•
•
•
-
-
•
•
•
Headphone Out
REC out select
Source direct
Others
Power amp direct mode
Micro processor auto off
Auto Power Off
-
•
•
•
•
-
-
•
•
-
-
•
•
-
-
•
•
•
•
PM A-2020A E
15
D C D -2020A E
D C D -1510A E
D C D -720A E
D C D - 520A E
PM A-1510A E
PM A-720A E
PM A-520A E
16
Stereo Receiver
Network Audio Player / Stereo Tuner
DRA-700AE
DRA-500AE
DNP-720AE
TU-1510AE
2 channels
-
2 Hz - 48 kHz (fs: 96 kHz)
2 Hz - 20 kHz (fs: 44.1 kHz)
-
8 ohms (20 Hz - 20 kHz, 8 ohms, T.H.D. 0.08 %)
Rated output power
4 ohms (1 kHz, 4 ohms, T.H.D. 0.7 %)
Speaker A or B
SpeakerTerminal
Input sensitivity / impedance
AM section
95 W + 95 W
4 ~ 16 ohms
4 ~ 16 ohms
Speaker A + B
8 ~ 16 ohms
8 ~ 16 ohms
4 ~ 16 ohms
4 ~ 16 ohms
LINE
200 mV / 47 kohms
200mV / 47 kohms
Phono MM
2.5 mV / 47 kohms
-
Channels
Frequency response
Digital Audio Section
FM section
-
-
Tuning frequency range
87.5 - 108.0 MHz
87.5 - 108.0 MHz
Usable sensitivity
1.0 µV (11.2 dBf)
1.0 µV (11.2 dBf)
522 - 1611 kHz
522 - 1611 kHz
Usable sensitivity
AM section
Dynamic range
98 dB
-
110 dB
-
0.0035 % (1 kHz, audible band)
-
87.5 - 108.0 MHz
87.5 - 108.0 MHz
65 dB (mono)
FM: Mono 77 dB (IHF), 73 dB (DIN)
522 - 1611 kHz
522 - 1611 kHz
40 dB
53 dB
Output voltage
2 Vrms
FM: 1.0 V AM: 0.3 V
Power supply
AC 230 V, 50 / 60 Hz
AC 230 V, 50 / 60 Hz
Power consumption
18 W (stanby 0.2 W)
10 W (stanby 1.0 W)
434 × 74 × 282 mm
434 × 73 × 286 mm
2.9 kg
3.6 kg
Wi-Fi / Wired LAN
-
18 µV
18 µV
AC 230 V, 50 Hz
AC 230 V, 50 Hz
Power consumption
245 W (stanby 1.0 W)
235 W (stanby 1.0W)
434 × 147 × 417 mm
434 × 147 × 414 mm
Weight
9.7 kg
9.0 kg
Phono MM
•
-
Audio input
6
5
Rec output
2
2
Power supply
General
75 W + 75 W
Bi-Wiring
Phono MC
FM section
80 W + 80 W
105 W + 105 W
Weight
General
Features
Network audio streaming
Features
Ports
Pre Out for Zone 2 & 3
Video in / out
Tuner
Music server
•
-
Windows 7 compatibility
3 / 2 +2 for Zone 2 & 3
-
Supported Formats
-
DLNA / WMP11 / Twonky Vision
-
•
-
MP3 / WAV / AAC / WMA / FLAC 96/24
-
RDS with Radio Text
•
•
•
-
Station memory (FM & AM)
56
56
Internet Radio
vTuner (MP3 / WMA)
-
Auto preset memory
•
•
•
•
•
•
•
•
Remote App
Denon Remote App
-
Party Mode
•
•/•
•
•
-
FM / AM
FM / AM
•
•
•
•
D/A Converter
192 kHz / 24-bit
-
Digital output
1 (optical)
-
1
1
3 line OELD
2 line FLD
•
•
SLDC
Others
Network Type (Wi-Fi)
Conforming to IEEE802.1b
Conforming to IEEE802.1g
Loudness
Binding post speaker terminal
Network
AirPlay
iPod / USB Direct Play
Wake on LAN
Online Firmware Update
Tuner
Tuner
RDS (radio data system)
Radio Text
Others
Turntable
Analogue output
Display
Remote control
DP-300F
DP-200USB
-
DP-29F
Drive system
Turntable
Motor
33-1/3, 45 rpm
33-1/3, 45 rpm
33-1/3, 45 rpm
0.10 % (WRMS)
0.15 % (WRMS)
0.15 % (WRMS)
Static balance straight tone arm
Dynamic balanced type
Dynamic balanced type
221.5 mm
195 mm
195 mm
19 mm
-
-
0 ~ 4.0 g
-
-
Overhang
Stylus pressure adjustment range
4.5 ~ 9.5 g (except Headshell)
-
-
MM
MM
MM
Replaceable stylus number
DSN-85
DSN-84
DSN-82
Output Voltage
2.5 mV
2.5 mV
2.5 mV
Output Voltage (with equalizer on)
150 mV
150 mV
150 mV
3.5 g
Suitable cartridge empty weight
Type
Optimal stylus pressure
Others
2.0 g
3.5 g
5g
-
-
Head shell Weight
10 g (PCL-310)
-
-
Digital recording media
-
USB (mass storage class)
-
Digital recording format and bitrate
-
MP3 / 192kbps
-
Design and specifications are subject to change without notice.
(CD-ROM) TransMusicManager
-
•
-
-
Microsoft Windows 7 / Vista / XP /
2000 (32 bit version)
-
AC 230 V, 50 Hz
AC 230 V, 50 Hz
AC 230 V, 50 Hz
2W
12 W
2W
434 × 122 × 381 mm
434 × 386 × 413 mm
360 × 98 × 358 mm
360 × 415 × 363 mm
360 × 97 × 357 mm
360 × 417 × 362 mm
• Super Audio CD®, SA-CD® and the SA-CD logo® are registered trademarks of Royal Philips Electronics NV and Sony Corporation. • Direct Stream Digital and DSD
logo are trademarks of the Sony Corporation. • Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries. • “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the
developer to meet Apple performance standards. • Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
• Airplay®, iTunes®, App Store®, iPad®, iPhone®, iPod® and iPod touch® are trademarks of Apple Inc., registered in the U.S. and other countries. • DLNA®, the DLNA
Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance. • “Android“ and “Google Play“ are trademarks of Google, Inc • Denon is a trademark or registered trademark of D&M Holdings, Inc.
5.5 kg
3.2 kg
2.8 g
Power supply
Power consumption
Dimensions
(W × H × D)
Weight
17
D N P-720A E
Cartridge Weight
TRANS Music Manager for OS
General
Belt Drive
DC Servo Motor
Wow & flutter
Effective arm length
Cartridge
Belt Drive
DC Servo Motor
Speed
Type
Tonearm
Belt Drive
DC Servo Motor
Dust cover closed
Max., Dust cover opened
All other trademarks and registered trademarks are property of their respective owners.
18

Hi-Fi AUDIO COMPONENTS 2012 / 2013

Transcription

Similar documents

PMA-2500NE - Audiogamma

UA-3FX

tx-8030 stereo receiver

a state of the art power amplifier at an affordable price

AVR-X1000 5CH INTEGRATED NETWORK RECEIVER

Audio Video Controller

A 31 Three Channel Power Amplifier

9200 integrated amplifier

HT-S7700 5.1.2-Channel Network A/V Receiver

TX-SR313 5.1-Channel Home Cinema Receiver

Parasound Halo JC 1 Monaural Amplifier