ESAFORM 2010_4_luglio.pub

DEADLINES
October 16, 2009
November 13, 2009
December 18, 2009
January 22, 2010
The 13th International
ESAFORM Conference on Material Forming
Abstract submissions
Notification of acceptance
Final paper submission
Notification of final paper
acceptance
ESAFORM 2010
WEBSITE
Information about abstract submission, Conference
registration, accommodation and mini-symposia are
available on the Conference website:
http://esaform2010.ing.unibs.it/
CONTACTS
Conference Chairman:
Prof. Elisabetta CERETTI - [email protected]
Prof. Claudio GIARDINI - [email protected]
Administrative secretariat:
[email protected]
Scientific secretariat:
[email protected]
CONFERENCE LOCATION
Dipartimento di Ingegneria Meccanica e Industriale
Università degli Studi di Brescia
Via Branze, 38
25123 BRESCIA - ITALY
Tel: + 39 030 3715583
Fax: + 39 030 3702448
ESAFORM
ESAFORM is a European association with a mission to
stimulate the applied and fundamental research in the
field of material forming.
ESAFORM's main goals are :
• Spreading scientific and technological information within
academic and industrial communities.
• Establishing communication between industry and research laboratories.
• Promoting the teaching of material forming sciences in
universities.
• Promoting and facilitating collaborative projects and
European networking in the field of material forming.
• Strengthening cooperation between national,
• European and international organisations.
• Encouraging interdisciplinary research in the area of
material forming.
ESAFORM publishes an official journal and organises
many scientific activities. The flagship event is the annual
Conference on Material Forming, where ESAFORM members and other participants meet to discuss their research.
ESAFORM awards annual prizes to the distinguished the
researchers/designers who have made an outstanding
contribution to the field of material forming.
BRESCIA - ITALY
April 7-9 2010
CALL FOR PAPER
University of Brescia - Dept. of Mechanical and Industrial Engineering
University of Bergamo - Dept. of Design and Technologies
ORGANISING COMMITTEE
CONFERENCE GOALS
Prof. Elisabetta CERETTI (Chairman)
Prof. Claudio GIARDINI (Chairman)
Prof. Giancarlo MACCARINI
Prof. Aldo ATTANASIO
Prof. Gianluca D’URSO
Prof. Antonio FIORENTINO
Prof. Luca GIORLEO
Dr. Dario BRAGA
Dr. Cristian CAPPELLINI
Dr. Roberto MARZI
The purpose of this Conference is to facilitate the
communication between specialists in various fields
of material forming sciences.
Presentations concerning all the steps of material
forming processes are welcome: from fundamental
studies to applied aspects, from experimental to
numerical research.
SCIENTIFIC COMMITTEE
The scientific committee for this Conference is made of
the MINI-SYMPOSIA Coordinatos.
ESAFORM BOARD of DIRECTORS
Prof. Philippe BOISSE (President)
Prof. Dorel BANABIC (Vice-President)
Dr. Elisabeth MASSONI (Treasurer)
Prof. Remko AKKERMAN (Secretary)
Prof. Fabrizio MICARI (Deputy-secretary)
Dr.Ing. Anne-Marie HABRAKEN (Past-President)
Prof. Carlos AGELET DE SARACIBAR
Prof. Helen ATKINSON
Prof. Valerio BRUCATO
Prof. Jean-Loup CHENOT
Prof. Francesco CHINESTA
Prof. Elias CUETO
Dr. Lionel FOURMENT
Prof. Jean-Claude GELIN
Prof. Jean-Marc HAUDIN
Dr. Jari LARKIOLA
Dr. Gary MENARY QUEEN'S
Dr. Andrzej ROSOCHOWSKI
Prof. Fabrice SCHMIDT
Prof. Miklós TISZA
Dr. Ton van den BOOGAARD
Prof. Torgeir WELO
MINI-SYMPOSIA
CALL FOR PAPERS
The Conference is organized in mini-symposia with one or more
Coordinators; the Conference sessions will be organized according to these mini-symposia
Please send a 400 word abstract including
the title, authors and corresponding author’s affiliation.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Inverse analysis optimization and stochastic approaches
Multiscale approaches
Sheet metal forming
Material behaviour and formability
Sheet and Tube Hydroforming
Forging and rolling
Extrusion and drawing
Nano-structured materials and microforming
Machining and cutting
Structures, properties and processing of polymers
Composites forming processes
Semi-solid processes
Heat transfer modelling
Light weight design and energy efficiency in metal forming
New and advanced numerical strategies for material forming
Incremental forming
Innovative joining by forming technologies
Non-conventional processes
High temperature sheet forming
Influence of curvature on formability limits in sheet forming
Authors from universities, research centers and
industry are invited to submit papers to the Conference.
The main features, results and conclusions of
the paper should be outlined.
The abstract must be submitted through the Conference website where detailed instructions are given
on how to prepare the abstract.
Authors should clearly indicate the appropriate
mini-symposia at which submit their abstract.
The Conference Scientific Committee and the Coordinators of the mini-symposia will review the abstracts and
will notify the corresponding authors of acceptance.
Final manuscripts should be prepared in camera-ready
form using the template that will be available on the
website.
Proceedings will be available at the conference and
published online by Springer after the conference (for
those papers that were actually presented and for which
the conference fee was received). Extended versions of
selected papers will be published in the International
Journal of Material Forming, the official journal of the
ESAFORM association.