Shackles - Franklin Offshore

Transcription

Introduction
P.O. Box 57, 3360 AB Sliedrecht
Industrieweg 6, 3361 HJ Sliedrecht
The Netherlands
Tel. +31 184 41 33 00
Fax +31 184 41 49 59
E-mail [email protected]
www.vanbeest.nl
Dear customer,
For over 85 years the production of high tensile shackles has been our core business and competence.
Dirk van Beest founded the Van Beest company in 1922, initially as a supplier of iron works to the dredging industry, which was strongly
developed in the Sliedrecht area.
From the very beginning, the company has been forging shackles. Its ironwork expertise gave the Van Beest shackle an edge over
the competition and this was the start of a network of professional users that now stretches across the globe. The designs and quality standards of our shackles are the result of requirements put forward over the years by our customers in markets throughout the
world.
Our shackles are marked Green Pin®, and we are the sole proprietors of the trade name Green Pin®.
Production
At Van Beest we were faced with a labour-intensive production unit. Over the years Van Beest invested, with it’s own engineers, in
development of a series production line of high quality output. The highly automated machines in the factory are custom built to
Van Beest’s requirements and thus to those of our customers.
The same technicians demand the quality of the products during production and therefore guarantee quality to our customers.
Each individual Green Pin® shackle is marked with the steel grade and a traceability code. But quality is not only a matter of the
product itself, it stretches across the entire organization. Since 1993 our company has been ISO certified by Lloyds; currently we are
ISO 9001-2000 certified.
Accessories
Our Green Pin® shackles are used by professionals in many different environments such as the offshore industry, naval construction,
the fishing industry, mining, and general industry, to mention just a few.
The Green Pin® shackle is usually the final connection, and to serve our customers best, we have added a wide range of steel wire rope
and chain accessories which complement our full range of high quality shackles. These accessories are engineered by Van Beest and
carefully sourced from certified suppliers to ensure they represent the same high quality performance as our own products.
Distribution
Both our Green Pin® shackles and accessories are inspected and stored at our main warehouse in Sliedrecht, 30 km from Rotterdam,
where we offer our wide range of shackles and accessories from stock. Rotterdam is the main seaport to Europe inbound and has
sailing connections to all the major business centres across the world outbound.
Storage efficiency is optimized by the latest computer software, enabling us to make maximum use of our storage facilities.
A customer order can be shipped from our warehouse within 4 hours from placing the order. Additionally, wholesalers
throughout the world maintain stocks of our Green Pin® shackles and accessories in order to serve
their own target markets best. In over 80 countries worldwide Green Pin® shackles and accessories are
available from storage at our various distributors. We will be pleased to advise you of the Green Pin®
supplier nearest to you to obtain supplies.
We trust this catalogue will be a helpful business tool for you and that it will assist you in serving your
customers’ needs. In addition, our skilled salespeople and technicians are always at your service.
Please do not hesitate to contact us for any question related to shackles or other wire rope and chain
accessories in general.
We are convinced that with the full range of our Green Pin® products and services you have found an
excellent source that enables you to meet your needs in the global marketplace.
Kind regards,
C. Boer
Managing Director
R.M. Meer
General Sales Manager
P.S.: For general business terms and conditions see page 166
VAN BEEST BV, manufacturer and supplier of wire rope and chain fittings. Reg. trade mark ‘Green Pin’
Rabobank: accountnumber 35 93 43 155. IBAN code: NL86RABO0359343155, SWIFT/BIC code: RABONL2U
Postbank 189638, Vat number NL 0091.33.835.B01, Chamber of Commerce Dordrecht: number 23009317
All our offers and contracts are subject to our general conditions of business as registered with the District Court of Dordrecht
on May 13, 1994 under number 17.088. Copies of these conditions are printed in our catalogue or can be obtained on request.
Member of Van Beest International
2
Introduction
Introduction
VAN BEEST BV, manufacturer and supplier of wire rope and chain fittings. Registered trademark Green Pin®
VAN BEEST BV
Head Office
VAN BEEST GmbH & Co. KG
P.O. Box 57
3360 AB Sliedrecht
The Netherlands
VAN BEEST USA, L.L.C.
P.O. Box 15674
Houston, Texas 77220
United States of America
Industrieweg 6
3361 HJ Sliedrecht
The Netherlands
Industriestraße 9
D-59457 Werl
Germany
5820 Harvey Wilson Drive
Houston, Texas 77020
United States of America
Telephone
Telefax
E-mail
Internet
Telephone
Telefax
E-mail
Telephone
Telefax
E-mail
+31 184 41 33 00
+31 184 41 49 59
[email protected]
www.vanbeest.nl
+49 2922 97 430
+49 2922 83 289
[email protected]
+1 800 489 75 08
+1 713 674 82 24
[email protected]
your reliable partner
We reserve the right to make amendments on specifications mentioned in this catalogue without prior notification.
Specifications show general compliance with the various standards and should not be taken to meet all terms of the contract or purchase
order.
Chamber of Commerce Dordrecht, Registration Number 23009317
VAT Number NL 0091.33.835.B01
©copyright 2008 VAN BEEST BV, Sliedrecht
All Rights Reserved
3
Introduction
General
In case you do not use the products yourself but are reselling these as a part of a product manufactured by
yourself, please take our general cautions and warnings into account and make these known to your customers
as well. In any case, we do not accept any responsibility or liability, nor can we be held responsible for any
misuse or damage with, by or at your customers due to negligent use.
Definitions
Material
For the production of shackles and other lifting devices, different raw materials are used, depending on the use
of the finished product. For shackles for example, depending on the specific use, the following raw materials
can be applied:
•
•
•
•
mild steel, untreated, comparable to grade 3
high tensile steel, untreated, or normalized, which is comparable to grade 4
high tensile steel, quenched and tempered, which is comparable to grade 6
alloy steel, quenched and tempered, which is comparable to grade 8
Load
Following terms are used to define a load:
• Working Load Limit or WLL: the maximum load the product is designed to support, in general use and in a
straight pull.
• Proof Load or PL: this is the load applied on proof testing the product. At this load the product may not show
visual deformation. For further specific information as to the proof load applied, we refer to the separate paragraph on testing further on.
• Minimum Breaking Load or MBL; the minimum load at which the product may fail or no longer support the
load. Where applicable the details on the MBL are given specifically for each product range, at the beginning
of each chapter.
• Shock Load: a load resulting from a very rapid application of the load on the product. Shock loads are to be
avoided in practice since these increases the stress on the product significantly and may affect its product
life.
The unit that is used in this catalogue to indicate WLL, PL and MBL is metric tons.
Safety factor
This factor gives the ratio between the Minimum Breaking Load and the Working Load Limit.
For the standard range of Green Pin® shackles for example, the safety factor is 6:1, meaning that the shackle may
only break once it is overloaded by a factor of at least 6 (6 times its designed Working Load Limit).
Product dimensions
All product dimensions in this catalogue are nominal dimensions. Product design, materials and/or specifications
can be subject to alterations without prior notification.
Finish
Products can have following finish:
• Self coloured: the product is delivered in the condition it has been forged or machined and has undergone no
specific finish treatment.
• Electro-galvanized: the product is electro-galvanized according to the customary standards, after the actual
production of the product. The thickness of the coating is at least 5 µm.
• Hot dipped galvanized: the product is hot dipped galvanized according to the customary standards, after the
actual production of the product. The thickness of the coating is at least 70 µm.
• Painted: the product is painted in a specific colour after the production.
Standard
These refer to the specific standards indicated for the product.
Temperature range
This indicates the temperature range at which the product can be used. Outside the temperature range the WLL
of a product may be affected.
4
Depending on the type of product and certificate availability for a certain product, following certificates are used
in this catalogue:
•
•
•
•
works certificate in accordance with EN 10204 - 2.1 or 2.2;
certificate of basic raw material in accordance with EN 10204 - 3.1;
manufacturer test certificate;
EC Declaration of Conformity in accordance with annex IIA of the machine directive 98/37/EC and the latest
amendments;
• inspection certificate in accordance with EN 10204 - 3.2;
• proof load test certificate;
• certificate with the actual breaking load experienced on tested samples.
Please refer to the relevant product chapter for further details on certificates.
On request we can test under supervision of a classification bureau like LROS, DNV, BV, etc..
Abbreviations
The following abbreviations are used in this catalogue:
C
A
R
S
P
E
G
Carbon steel
Alloy steel
Stainless steel
Self coloured
Painted
Electro-galvanized
Hot dipped galvanized
5
Introduction
Certificates
Introduction
Testing
Generally the following proof loads are applied to the load rated products and certificates can be supplied upon
request. For further conditions on certificates please consult the general price list.
For Green Pin shackles, the actual proof load depends on the shackle type and dimension and is applied as
follows:
working load
limit
tons
0.33
0.5
0.75
1
1.5
2
3.25
3.3
4.75
5
6.5
7
8.5
9.5
12
12.5
13.5
15
17
18
21
25
30
35
40
42.5
55
75
85
120
125
150
175
200
250
300
400
500
600
700
800
900
1000
1250
1500
6
Green Pin®
standard shackles
polar shackles
heavy duty shackles
proofload
tons
0.66
1
1.5
2
3
4
6.5
Green Pin®
super shackles
Green Pin®
sling shackles
proofload
tons
proofload
tons
6.6
9.5
10
13
14
17
19
24
19
25
27
30
34
36
42
50
60
65
80
60
74
90
110
82.5
112.5
127.5
180
170
240
225
225
262.5
300
375
450
600
750
900
1050
1200
1350
1500
1875
2250
187.5
225
300
375
450
532
665
798
931
1064
1197
1330
1663
1995
All Working Load Limits (WLL) indicated in this catalogue or in other Van Beest literature or publications are only
applicable to recently supplied, new and unused products used under normal conditions.
Should extreme circumstances or shock loading be applicable, this must be taken into account when specifying
the products to be used.
The Working Load Limit should be applied in a straight pull and overloads should not be applied. This also
applies to side loads, which also should be avoided, as the products are not designed for this purpose and the
application of a side load may significantly decrease the product life.
The Working Load Limit for the product corresponds to static use. In case of dynamic use (breaking, accelerations, shocks), the effective stress on the product increases significantly which can lead to product failure.
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be
affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material
structure.
Inspection should take place at least every six months and even more frequently when the products are used in
severe operating conditions.
In accordance with our on-going policy to improve our products, some dimensions or product markings
may differ from those stated. The characteristics mentioned in this catalogue or in other Van Beest literature or publications are given merely as an indication. Van Beest reserves the right to make all suitable
modifications to any product, even after acceptance of the customer order. In any case, the essential characteristics and performances of the products shall not be negatively affected by such modifications. Any dimension considered to be critical should be verified with our engineering department.
Conversion factors
To convert
from
Length
mm
inch
to
multiply by
inch
mm
0.0393701
25.4
Mass
US tons
metric tons
metric tons
pounds
metric tons
kilogram
metric tons
kilo Newton
pounds
kilogram
metric tons
US tons
pounds
metric tons
kilogram
metric tons
kilo Newton
metric tons
kilogram
pounds
0.9071847
1.1023113
2204.6226218
0.0004536
1000
0.001
9.8066500
0.1019716
0.4535924
2.2046226
Torque
Newton meter
foot pound-force
foot pound-force
Newton meter
0.7375621
1.3558180
7
Introduction
General cautions and warnings
8
Introduction
Introduction
1 Shackles
10
1
2 Thimbles
50
2
3 Wire Rope Clips
60
3
4 Sleeves
66
4
5 Sockets
70
5
6 Turnbuckles
78
6
7 Links
90
7
8 Swivels
94
8
9 Hooks
100
9
10 Eye Bolts/Eye Nuts
106
10
11 Loadbinders
110
11
12 Chain
114
12
13 Plate Lifting Clamps
116
13
14 Blocks
122
14
15 General Hardware
132
15
16 Stainless Steel Products
140
16
Shackles
Applications
Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other
fittings. Screw pin shackles are used mainly for non-permanent applications. Safety bolt shackles are used for
long-term or permanent applications or where the load may slide on the pin causing rotation of the pin.
Chain or dee shackles are mainly used on one-leg systems whereas anchor or bow shackles are mainly used
on multi-leg systems.
Range
Van Beest offers a wide range of bow and dee shackles, depending on the application on which the shackle
is going to be used; the range stretches from Working Load Limit (WLL) 0.33 tons to 1500 tons. Therefore, our
customers have a very extensive range to choose the shackle exactly suitable for the application. Most of the
shackles are directly available from stock. Furthermore, shackles can be supplied to many standards such as the
US Federal Specification RR-C-271, EN 13889, British Standard 3032, DIN 82101, DIN 82016 etc.
Polar shackles are for use in extreme climatic conditions with material properties guaranteed up to temperatures
of -40oC, and furthermore we offer a wide range of general commercial shackles, which are not suitable for lifting
but merely for fixing purposes.
Design
1
All Van Beest shackles have a specific design for a specific application. Examples are the “Super” shackles which
are made out of grade 8 steel enabling the dimensions of the shackles to be minimized for use in limited space
conditions, without loss of functionality or Working Load Limit.
Or sling shackles for use with large slings, to provide a better radius to the sling being used. Another example
of functional design is the use of shackles where the pin has a square sunken hole so as not to obstruct the use
of fishing nets. These are all examples of a highly functional design, to optimize the use of the Van Beest shackles
in daily use.
2
3
Furthermore, shackles used for lifting applications are stamped with the following marks, to specify the quality
and safety of use of the shackles:
4
-
5
6
Working Load Limit
manufacturer’s identification symbol
traceability code
steel grade
CE conformity code
■
■
■
■
■
i.e. WLL 25 T
i.e. Bs, indicating Van Beest
i.e. H pertaining to a particular batch
i.e. 4, 6, 8
i.e. CE, Conformité Européen indicating that the product is suitable
for lifting purposes.
Van Beest Green Pin® shackles meet all relevant requirements of the Machinery Directive 98/37/EC and all latest
amendments.
7
8
Finish
9
Shackles supplied by Van Beest can be either hot dipped galvanized, electro-galvanized, painted or self coloured, depending on the type of shackle and its application.
Please consult the product section further on for each type of shackle what finish the product has.
10
11
12
13
14
15
16
10
Upon request at time of order, all load rated shackles can be supplied with any of the following documents or
certificates:
-
works certificate in accordance with EN 10204 - 2.1 or 2.2;
certificate of basic raw material in accordance with EN 10204 - 3.1;
manufacturer test certificate;
EC Declaration of Conformity in accordance with annex IIA of the machine directive 98/37/EC;
-
inspection certificate in accordance with EN 10204 - 3.2;
proof load test certificate;
certificate with the actual breaking load experienced on tested samples;
test report of Magnetic Particle Inspection (M.P.I.);
test report of Ultrasonic Inspection (U.S.).
Shackles
Certification
The first four of the above mentioned certificates can be supplied at no extra charge. For all other certificates,
additional costs will be charged.
The test certificates can be supplied surveyed by all official classification societies, such as Lloyd’s, Det Norske
Veritas, British Standards Bureau, American Bureau of Shipping, Germanischer Lloyd’s or any other officially
certified inspection body.
Green Pin Standard Shackles and Green Pin Polar Shackles are DNV type approved to certification Note 2.7-1,
lifting sets for offshore containers.
Instructions for use
1
2
Shackles should be inspected before use to ensure that:
•
•
•
•
•
•
•
•
all markings are legible;
the body and pin are both identifiable as being of the same size, type and make;
the threads of the pin and the body are undamaged;
never use a safety bolt type shackle without using the split cotter pin;
the body and the pin are not distorted or unduly worn;
the body and pin are free from nicks, gouges, cracks and corrosion;
shackles may not be heat treated as this may affect their Working Load Limit;
never modify, repair or reshape a shackle by welding, heating or bending as this will affect the Working Load
Limit.
3
4
5
6
Assembly
Ensure that the pin is correctly screwed into the shackle eye, i.e. tighten hand-tight, then secure using a wrench
or other suitable tool so that the collar of the pin is fully seated on the shackle eye. Ensure that the pin is of the
correct length so that it penetrates the full depth of the screwed eye and allows the collar of the pin to seat on
the surface of the shackle eye.
7
8
Incorrect seating of the pin may be due to a bent pin, too tight fitting thread or misalignment of the pin holes.
Do not use the shackle under these circumstances. Never replace a shackle pin except with one of the same
size, type and make as it may not be suitable for the loads imposed.
9
Select the correct type of shackle and its Working Load Limit for the particular application. Should extreme
circumstances or shock loading be applicable, this must be well taken into account on selecting the correct
shackle. Please note that commercial shackles are not to be used for lifting applications.
10
Make sure that the shackle is supporting the load correctly, i.e. along the axis of the shackle body centreline,
avoid introduction of bending loads, unstable loads and do not apply overloads.
11
12
13
14
15
16
11
Shackles
Side loads
Side loads should be avoided as well, as the products are not designed for this purpose. If side loads cannot be
avoided, the following reduction factors must be taken into account:
Load angle
0°
45 °
90 °
Reduction for side loading
New Working Load Limit
100% of original Working Load Limit
In-line loading is considered to be a load perpendicular to the pin and in the plane of the bow. Load angles in
the table are the deviating angles from the in line loads.
When using shackles in connection with multi-leg slings, due consideration should be given to the effect of the
angle between the legs of the sling. As the angle increases, so does the load in the sling leg and consequently
in any shackle attached to that leg.
1
2
3
4
5
6
When a shackle is used to connect two slings to the hook of a lifting device, a bow type shackle must be assembled with the slings in the shackle body and the hook engaged with the shackle pin. The angle between the
slings should not exceed 120°.
7
To avoid eccentric loading of the shackle a loose spacer may be used on either end of the shackle pin. Do not
reduce the width between the shackle jaws by welding washers or spacers to the inside faces of the eyes or by
closing the jaws, as this will affect the properties of the shackle.
8
9
10
11
12
13
RIGHT
WRONG
When a shackle is used to secure the top block of a set of wire rope blocks the load on this shackle is increased
by the value of the hoisting effect.
14
15
16
12
Shackles
Avoid applications where due to movement (e.g. of the load or the rope) the shackle pin can rotate and possibly
be unscrewed. If such an application is necessary or when the shackle is to be left in place for a prolonged period
or where maximum pin security is required, use a shackle with a safety bolt, nut and split cotter pin.
Shackles should not be immersed in acidic solutions or exposed to acid fumes or other chemicals that are
potentially harmful for the shackle. Please be aware that these types of chemicals are used in certain production
processes.
Point loading
Most of the times the load bearing component that is in connection with a shackle is of a rounded shape. Point
loading of shackles is allowed but the minimum diameter of a rounded component should be equal or bigger
than the bow size of the shackle being used.
Bigger diameters and or flat parts (at shackle pin side) to increase contact area can be beneficial. Sharp edges
should be avoided.
2
3
Temperature
4
If extreme temperature situations are applicable, the following load reduction must be taken into account:
Temperature
up to 200°C
200 - 300°C
300 - 400°C
> 400°C
1
Reduction for elevated temperatures
New Working Load Limit
not allowed
5
6
The rating of shackles to EN 13889 assumes the absence of exceptionally hazardous conditions. Exceptionally
hazardous conditions include offshore activities, the lifting of persons and the lifting of potentially dangerous
loads such as molten metals, corrosive materials or fissile materials. In such cases a competent person should
assess the degree of hazard and the safe working load should be reduced accordingly from the Working Load
Limit.
Inspection
It is required that the shackles are regularly inspected and that the inspection should take place in accordance
structure.
Inspection should take place at least every six months and even more frequently when the shackles are used in
Proofload testing
It is required that the shackles are regularly proofload tested and that the testing should take place in accordance with the safety standards given in the country of use. This is required because the products in use may
be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material
structure. Proofload testing should take place at least every 4 years and more frequently when the shackles are
used in severe operating conditions.
7
8
9
10
11
12
13
14
15
16
13
Shackles
Green Pin® Standard Shackles
bow shackles with screw collar pin
• Material
• Safety Factor
• Standard
: bow and pin high tensile steel, Grade 6, quenched and tempered
: MBL equals 6 x WLL
: EN 13889 and
meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 2, Grade A
• Finish
: hot dipped galvanized
• Temperature Range : -20°C up to +200°C
• Certification
: at no extra charges this product can be supplied with a works certificate, certificate of
basic raw material, manufacturer test certificate and/or EC Declaration of Conformity
G-4161
working diameter diameter diameter
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
35
42.5
55
1
2
3
4
5
7
9
10
11
13.5
16
19
22
25
28
32
35
38
45
50
57
65
6
8
10
11
13
16
19
22
25
28
32
35
38
42
50
57
65
70
In inch
6
load
bow
pin
eye
limit
a
b
c
tons
inch
inch
inch
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
35
42.5
55
8
9
10
11
12
13
14
15
16
14
3
/16
1
/4
5
/16
3
/8
7
/16
1
/2
5
/8
3
/4
7
/8
1
1
1
1
1
1
2
2
2
1
/8
/4
3
/8
1
/2
3
/4
1
1
/4
1
/2
1
/4
5
/16
3
/8
7
/16
1
/2
5
/8
3
/4
7
/8
1
1
1
1
1
1
2
2
2
2
1
/8
1
/4
3
/8
1
/2
5
/8
1
/4
/16
3
/4
9
width
inside
length
inside
width
bow
length
length
bolt
width
d
mm
e
mm
f
mm
g
mm
h
mm
i
mm
j
mm
kg
5
7
9
10
11
13.5
16
19
22
25
28
32
35
38
45
50
57
65
9.5
12
13.5
17
19
22
27
31
36
43
47
51
57
60
74
83
95
105
22
29
32
36.5
43
51
64
76
83
95
108
115
133
146
178
197
222
260
16
20
22
26
29
32
43
51
58
68
75
83
92
99
126
138
160
180
41
54
61
71
80
91
114
136
157
176
197
218
240
262
314
358
414
463
31
40
49
56
68
76
93
107
123
141
158
176
192
208
250
281
321
355
28
37
42
49
54
63
79
94
107
124
137
154
170
183
226
250
287
329
0.02
0.05
0.1
0.14
0.19
0.36
0.63
1.01
1.5
2.21
3.16
4.31
5.55
7.43
12.84
18.15
26.29
37.6
weight
each
12.5
17
21
23
26
34
40
47
53
60
67
74
80
89
104
111
134
145
5
7
width
eye
width
eye
width
inside
length
inside
width
bow
length
length
bolt
width
d
inch
e
inch
f
inch
g
inch
h
inch
i
inch
j
inch
1
1
1
1
1
2
2
2
2
3
3
4
4
5
5
/2
11
/16
13
/16
29
/32
1
/32
11
/32
19
/32
7
/8
3
/32
11
/32
5
/8
29
/32
5
/32
1
/2
1
/8
11
/32
9
/32
3
/4
3
/16
9
/32
11
/32
3
/8
7
/16
17
/32
5
/8
3
/4
7
/8
1
1
1
1
1
1
1
2
2
1
/8
/32
3
/8
17
/32
25
/32
31
/32
1
/4
9
/16
9
3
1
1
1
1
1
2
2
2
2
3
3
4
/8
1
/2
17
/32
11
/16
3
/4
7
/8
3
/32
1
/4
7
/16
23
/32
7
/8
1
/4
/32
29
/32
9
/32
3
/4
1
/8
11
7
1
1
1
1
2
2
3
3
3
4
4
5
5
7
7
8
10
/8
5
/32
9
/32
7
/16
23
/32
17
/32
9
/32
/4
1
/4
17
/32
1
/4
3
/4
3
3
/4
/4
1
/4
3
5
/8
25
/32
7
/8
1
1
1
1
2
2
2
2
3
3
3
4
5
6
7
5
/32
/32
23
/32
9
9
/32
/16
15
/16
9
/32
5
/8
29
/32
15
/16
7
/16
9
/32
3
/32
11
1
2
2
2
3
3
4
5
6
6
7
8
9
10
12
14
16
18
5
/8
1
/8
3
/8
25
/32
5
/32
19
/32
1
/2
11
/32
5
/32
29
/32
3
/4
9
/16
7
/16
5
/16
11
/32
3
/32
5
/16
1
/4
1
1
1
2
2
3
3
4
4
5
6
6
7
8
9
11
12
14
1
/4
9
/16
15
/16
3
/16
11
/16
11
/16
/16
13
/16
9
/16
3
/16
29
/32
9
/16
3
/16
13
/16
3
/32
5
/8
3
1
1
1
1
2
2
3
3
4
4
5
6
6
7
8
9
11
12
1
/8
1
/2
11
/16
15
/16
1
/8
1
/2
1
/8
23
/32
3
/16
7
/8
3
/8
1
/32
11
/16
3
/16
29
/32
13
/16
5
/16
15
/16
weight
each
lbs
0.05
0.11
0.22
0.3
0.42
0.79
1.38
2.22
3.31
4.86
6.97
9.49
12.24
16.37
28.31
40.01
57.96
82.89
bow shackles with safety bolt
• Material
• Safety Factor
• Standard
: EN 13889 and
meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade A
• Finish
• Temperature Range : -20°C up to +200°C
• Certification
Shackles
G-4163
working diameter diameter diameter width
width
load
bow
pin
eye
eye
inside
limit
a
b
c
d
e
tons
mm
mm
mm
mm
mm
0.5
7
8
17
7
12
0.75
9
10
21
9
13.5
1
10
11
23
10
17
1.5
11
13
26
11
19
2
13.5
16
34
13.5 22
3.25
16
19
40
16
27
4.75
19
22
47
19
31
6.5
22
25
53
22
36
8.5
25
28
60
25
43
9.5
28
32
67
28
47
12
32
35
74
32
51
13.5
35
38
80
35
57
17
38
42
89
38
60
25
45
50
104
45
74
35
50
57
111
50
83
42.5
57
65
134
57
95
55
65
70
145
65
105
85
75
83
163
75
127
length
inside
f
mm
29
32
36.5
43
51
64
76
83
95
108
115
133
146
178
197
222
260
329
width
bow
length
length
bolt
g
mm
20
22
26
29
32
43
51
58
68
75
83
92
99
126
138
160
180
190
h
mm
54
61
71
80
91
114
136
157
176
197
218
240
262
314
358
414
463
556
i
mm
43
51
61
68
83
99
115
131
151
167
179
198
202
244
270
302
330
376
width thickness weight
nut
each
j
mm
37
42
49
54
63
79
94
107
124
137
154
170
183
226
250
287
329
355
k
mm
4
5
8
11
13
17
20
23
25
28
31
34
19
24
27
30
33
40
kg
0.06
0.11
0.16
0.22
0.42
0.74
1.18
1.77
2.58
3.66
4.91
6.54
8.19
14.22
19.85
28.33
39.59
62
2
3
4
5
In inch
load
bow
pin
eye
eye
limit
a
b
c
d
tons
inch
inch
inch
inch
1
5
11
9
0.5
/4
/16
/16
/32
5
3
13
11
0.75
/16
/8
/16
/32
3
7
29
3
1
/8
/16
/32
/8
7
1
7
1.5
/16
/2
1 1/32
/16
1
5
17
/2
/8
1 11/32
/32
2
5
3
5
3.25
/8
/4
1 19/32
/8
3
7
3
4.75
/4
/8
1 7/8
/4
7
7
6.5
/8
1
2 3/32
/8
8.5
1
1 1/8
2 11/32
1
9.5
1 1/8
1 1/4
2 5/8
1 1/8
12
1 1/4
1 3/8
2 29/32
1 9/32
13.5
1 3/8
1 1/2
3 5/32
1 3/8
17
1 1/2
1 5/8
3 1/2
1 17/32
25
1 3/4
2
4 1/8
1 25/32
35
2
2 1/4
4 11/32
2 31/32
42.5
2 1/4
2 9/16
5 9/32
2 1/4
55
2 1/2
2 3/4
5 3/4
2 9/16
85
3
3 1/4
6 7/16
2 15/16
1
width
inside
e
inch
1
/2
17
/32
11
/16
3
/4
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
3 9/32
3 3/4
4 1/8
5
length
inside
width
bow
length
length
bolt
nut
each
f
inch
1 5/32
1 9/32
1 7/16
1 23/32
2
2 17/32
3
3 9/32
3 3/4
4 1/4
4 17/32
5 1/4
5 3/4
7
7 3/4
8 3/4
10 1/4
12 15/16
g
inch
25
/32
7
/8
1
1 5/32
1 9/32
1 23/32
2
2 9/32
2 11/16
2 15/16
3 9/32
3 5/8
3 29/32
4 15/16
5 7/16
6 9/32
7 3/32
7 1/2
h
inch
2 1/8
2 3/8
2 25/32
3 5/32
3 19/32
4 1/2
5 11/32
6 5/32
6 29/32
7 3/4
8 9/16
9 7/16
10 5/16
12 11/32
14 3/32
16 5/16
18 1/4
21 29/32
i
inch
1 23/32
2
2 3/8
2 11/16
3 9/32
3 29/32
4 17/32
5 5/32
5 15/16
6 19/32
7 1/32
7 25/32
7 15/16
9 19/32
10 5/8
11 7/8
13
14 25/32
j
inch
1 1/2
1 11/16
1 15/16
2 1/8
2 1/2
3 1/8
3 23/32
4 3/16
4 7/8
5 3/8
6 3/32
6 23/32
7 3/16
8 29/32
9 13/16
11 5/16
12 15/16
14
k
inch
lbs
5
/32
0.13
3
/16
0.25
5
/16
0.34
7
/16
0.48
17
/32
0.92
11
/16
1.62
25
/32
2.59
29
/32
3.9
1
5.69
1 1/8
8.06
1 1/4
10.81
1 11/32 14.42
3
/4
18.06
1 5/16
31.34
1 3/32
43.77
1 3/16
62.46
1 5/16
87.27
1 19/32 136.69
6
7
8
9
10
11
12
13
14
15
16
15
Shackles
dee shackles with screw collar pin
• Material
• Safety Factor
• Standard
: EN 13889 and
meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 2, Grade A
• Finish
• Temperature Range : -20 °C up to +200 °C
• Certification
G-4151
working
load
limit
tons
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
35
42.5
55
1
2
3
4
5
diameter diameter diameter
bow
pin
eye
a
mm
5
7
9
10
11
13.5
16
19
22
25
28
32
35
38
45
50
57
65
b
mm
6
8
10
11
13
16
19
22
25
28
32
35
38
42
50
57
65
70
c
mm
12.5
17
21
23
26
34
40
47
53
60
67
74
80
89
104
111
134
145
width
eye
d
mm
5
7
9
10
11
13.5
16
19
22
25
28
32
35
38
45
50
57
65
width
inside
e
mm
9.5
12
13.5
17
19
22
27
31
36
43
47
51
57
60
74
83
95
105
length
inside
length
length
bolt
weight
each
f
mm
19
22
26
32
37
43
51
59
73
85
90
94
115
127
149
171
190
203
g
mm
38
47
56
66
74
85
105
125
144
161
179
199
220
239
283
333
360
399
h
mm
31
40
49
56
68
76
93
107
123
141
158
176
192
208
250
281
321
355
kg
0.02
0.05
0.09
0.14
0.19
0.32
0.54
0.87
1.34
2.08
2.77
3.72
5.14
6.85
11.45
16.86
24.61
32.65
In inch
6
working
load
limit
7
tons
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
35
42.5
55
8
9
10
11
12
13
14
15
16
16
bow
pin
eye
a
inch
3
/16
1
/4
5
/16
3
/8
7
/16
1
/2
5
/8
3
/4
7
/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 3/4
2
2 1/4
2 1/2
b
inch
1
/4
5
/16
3
/8
7
/16
1
/2
5
/8
3
/4
7
/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
2
2 1/4
2 9/16
2 3/4
c
inch
1
/2
11
/16
13
/16
29
/32
1 1/32
1 11/32
1 19/32
1 7/8
2 3/32
2 11/32
2 5/8
2 29/32
3 5/32
3 1/2
4 1/8
4 11/32
5 9/32
5 3/4
width
eye
width
inside
length
inside
length
lenght
bolt
weight
each
d
inch
3
/16
9
/32
11
/32
3
/8
7
/16
17
/32
5
/8
3
/4
7
/8
1
1 1/8
1 9/32
1 3/8
1 17/32
1 25/32
1 31/32
2 1/4
2 9/16
e
inch
3
/8
1
/2
17
/32
11
/16
3
/4
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
3 9/32
3 3/4
4 1/8
f
inch
3
/4
7
/8
1 1/32
1 1/4
1 1/2
1 23/32
2
2 5/16
2 7/8
3 11/32
3 9/16
3 23/32
4 17/32
5
5 7/8
6 3/4
7 1/2
8
g
inch
1 17/32
1 7/8
2 3/16
2 19/32
2 29/32
3 11/32
4 1/8
4 29/32
5 11/16
6 5/16
7 1/32
7 13/16
8 11/16
9 3/8
11 5/32
13 1/8
14 5/32
15 23/32
h
inch
1 1/4
1 9/16
1 15/16
2 3/16
2 11/16
3
3 11/16
4 3/16
4 13/16
5 9/16
6 3/16
6 29/32
7 9/16
8 3/16
9 13/16
11 3/32
12 5/8
14
lbs
0.04
0.11
0.2
0.3
0.42
0.7
1.19
1.92
2.95
4.59
6.1
8.2
11.33
15.1
25.23
37.17
54.26
71.98
dee shackles with safety bolt
• Material
• Safety Factor
• Standard
: EN 13889 and
meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 3, Grade A
• Finish
• Certification
Shackles
G-4153
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
2
13.5
16
34
3.25
16
19
40
4.75
19
22
47
6.5
22
25
53
8.5
25
28
60
9.5
28
32
67
12
32
35
74
13.5
35
38
80
17
38
42
89
25
45
50
104
35
50
57
111
42.5
57
65
134
55
65
70
145
85
75
83
163
width
eye
d
mm
13.5
16
19
22
25
28
32
35
38
45
50
57
65
75
width
inside
length
inside
length
e
mm
22
27
31
36
43
47
51
57
60
74
83
95
105
127
f
mm
43
51
59
73
85
90
94
115
127
149
171
190
203
229
g
mm
85
105
125
144
161
179
199
220
239
283
333
360
399
455
length thickness weight
bolt
nut
each
h
mm
83
99
115
131
151
167
179
198
202
244
270
302
330
376
i
mm
13
17
20
23
25
28
31
34
19
24
27
30
33
40
kg
0.39
0.67
1.08
1.66
2.46
3.4
4.51
6.1
7.63
13.25
18.53
25.94
35.33
52.97
1
2
3
4
5
In inch
load
bow
pin
eye
limit
a
b
c
tons
inch
inch
inch
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
35
42.5
55
85
1
/2
5
/8
3
/4
7
/8
1
1
1
1
1
1
2
2
2
3
1
/8
/4
3
/8
1
/2
3
/4
1
1
1
/4
/2
5
/8
3
/4
7
/8
1
1
1
1
1
1
2
2
2
2
3
1
/8
1
/4
3
/8
1
/2
5
/8
1
/4
9
/16
3
/4
1
/4
1
1
1
2
2
2
2
3
3
4
4
5
5
6
width
eye
width
inside
length
inside
length
d
inch
e
inch
f
inch
g
inch
11
/32
19
/32
7
/8
3
/32
11
/32
5
/8
29
/32
5
/32
1
/2
1
/8
11
/32
9
/32
3
/4
7
/16
17
/32
5
/8
3
/4
7
/8
1
1
1
1
1
1
1
2
2
2
1
/8
/32
3
/8
17
/32
25
/32
31
/32
1
/4
9
/16
15
/16
9
7
1
1
1
1
1
2
2
2
2
3
3
4
5
/8
3
/32
1
/4
7
/16
23
/32
7
/8
1
/4
11
/32
29
/32
9
/32
3
/4
1
/8
1
2
2
2
3
3
3
4
5
5
6
7
8
9
23
/32
5
/16
/8
11
/32
9
/16
23
/32
17
/32
7
7
/8
/4
1
/2
3
3
4
4
5
6
7
7
8
9
11
13
14
15
17
11
/32
1
/8
29
/32
11
/16
5
/16
1
/32
13
/16
11
/16
3
/8
5
/32
1
/8
5
/32
23
/32
29
/32
bolt
nut
each
h
inch
3
3
4
5
5
6
7
7
7
9
10
11
13
14
i
inch
9
/32
29
/32
17
/32
5
/32
15
/16
9
/16
1
/32
25
/32
15
/16
19
/32
5
/8
29
/32
25
/32
17
/32
11
/16
25
/32
29
/32
1
1
1
1
1
1
1
1
1
1
/8
/4
11
/32
3
/4
15
/16
3
/32
3
/16
5
/16
19
/32
1
lbs
0.85
1.48
2.39
3.66
5.42
7.5
9.95
13.45
16.82
29.21
40.86
57.19
77.89
116.77
6
7
8
9
10
11
12
13
14
15
16
17
Shackles
Green Pin® Heavy Duty Shackles
•
•
•
•
Material
Safety Factor
Finish
Certification
• Note
:
:
:
:
bow and pin alloy steel, Grade 8 quenched and tempered
MBL equals 5 x WLL
shackle bow painted silver, pin painted green (120 tons shackle is hot dipped galvanized)
at no extra charges this product can be supplied with a works certificate, certificate
of basic raw material, manufacturer test certificate, EC Declaration of Conformity and
all shackles starting from 150 tons are supplied with a Lloyd’s Register of Shipping
Certificate on proof load
: +5% forging tolerance on inside width and length
P-6036
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
120
95
95
215
89
150
105
108
245
100
200
120
130
288
110
250
130
140
308
115
300
140
150
335
120
400
170
175
387
160
500
180
185
410
160
600
200
205
458
185
700
210
215
468
200
800
210
220
478
200
900
220
230
500
210
1000
240
240
530
210
1250
260
270
600
225
1500
280
290
640
225
1
2
3
width
inside
length
inside
width
bow
length
length
bolt
nut
each
e
mm
144
165
175
200
200
225
250
275
300
300
320
340
360
360
f
mm
381
400
500
540
600
650
700
700
700
700
700
700
700
700
g
mm
238
275
290
305
305
325
350
375
400
400
420
420
450
450
h
mm
667
702
854
921
1018
1137
1213
1267
1287
1294
1320
1360
1430
1480
i
mm
440
490
520
560
575
690
710
810
850
870
920
940
1020
1060
j
mm
416
485
530
565
585
665
710
775
820
820
860
900
970
1010
width
inside
length
inside
width
bow
length
length
bolt
nut
each
e
inch
5 11/16
6 17/32
6 29/32
7 7/8
7 7/8
8 7/8
9 13/16
10 13/16
11 13/16
11 13/16
12 19/32
13 3/8
14 5/32
14 5/32
f
inch
15
15 3/4
19 11/16
21 9/32
23 5/8
25 19/32
27 1/2
27 1/2
27 1/2
27 1/2
27 1/2
27 1/2
27 1/2
27 1/2
g
inch
9 11/32
10 13/16
11 7/16
12
12
12 25/32
13 25/32
14 3/4
15 3/4
15 3/4
16 9/16
16 9/16
17 23/32
17 23/32
h
inch
26 9/32
27 5/8
33 5/8
36 9/32
40
44 3/4
47 3/4
49 7/8
50 11/16
51
52
53 9/16
56 5/16
58 5/16
i
inch
17 5/16
19 9/32
20 1/2
22
22 5/8
27 5/32
28
31 7/8
33 1/2
34 1/4
36 1/4
37
40 1/4
41 3/4
j
inch
16 3/8
19 1/8
20 7/8
22 1/4
23
26 1/4
28
30 1/2
32 3/8
32 3/8
33 7/8
35 1/2
38 1/4
39 3/4
k
mm
50
60
60
65
70
70
70
70
70
70
70
70
70
70
kg
110
160
235
285
340
560
685
880
980
1100
1280
1460
1990
2400
4
5
In inch
6
load
bow
pin
eye
eye
limit
a
b
c
d
tons
inch
inch
inch
inch
120
3 3/ 4
3 3/ 4
8 1/ 2
3 17/32
150
4
4 1/ 4
9 5/ 8
3 15/16
200
4 3/4
5 1/8 11 11/32 4 5/16
250
4 7/8
5 1/2 12 1/8
4 17/32
5 7/8 13 3/16
4 23/32
300
5 5/16
400
6 1/2
6 7/8 15 1/4
6 5/16
500
6 7/8
7 1/4 16 5/32
6 5/16
600
7 5/8
8 1/16 18
7 9/32
700
8 1/16
8 1/2 18 7/16
7 7/ 8
800
8 1/ 4
8 5/8 18 13/16 7 7/8
900
8 5/ 8
9 1/16 19 11/16 8 9/32
1000
9 1/16
9 7/16 20 7/8
8 9/32
1250
10 1/4 10 5/8 23 5/8
8 7/8
1500
11
11 7/16 25 3/16
8 7/8
7
8
9
10
11
12
13
14
15
16
18
k
inch
2
2 3/ 8
2 3/8
2 9/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/ 4
lbs
243
353
518
628
750
1235
1510
1940
2161
2425
2822
3219
4387
5291
•
•
•
•
Material
Safety Factor
Finish
Certification
• Note
:
:
:
:
bow and pin alloy steel, Grade 8, quenched and tempered
MBL equals 5 x WLL
hot dipped galvanized
at no extra charges this product can be supplied with a works certificate, certificate of
Shackles
Green Pin® Heavy Duty Shackles
G-6038
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
120
95
95
215
width
eye
width
inside
length
inside
length
d
mm
89
e
mm
144
f
mm
267
g
mm
530
bolt
nut
each
h
mm
440
i
mm
50
kg
110
1
2
3
4
5
In inch
load
bow
pin
eye
limit
a
b
c
tons
inch
inch
inch
120
3 3/4
3 3/4
8
15
/32
width
eye
width
inside
length
inside
length
d
inch
e
inch
f
inch
g
inch
h
inch
i
inch
20 7/8
17 5/16
1
3
17
/32
5
11
/16
10
17
/32
bolt
nut
each
31
/32
6
7
lbs
243
8
9
10
11
12
13
14
15
16
19
Shackles
Green Pin® Sling Shackles
•
•
•
•
•
P-6033
Material
Safety Factor
Finish
Temperature Range
Certification
• Note
:
:
:
:
:
bow and pin alloy steel, Grade 8, quenched and tempered
MBL equals 5 x WLL
shackle bow painted silver, pin painted green
-20 °C up to +200 °C
basic raw material, manufacturer test certificate, EC Declaration of Conformity and all
shackles are supplied with a Lloyd’s Register of Shipping Certificate on proof load, a
MPI certificate and US inspection certificate
±5% forging tolerance on inside width and length
load
body
pin
eye
width
width
length
width
eye
inside
inside
bow
length
length
width
bolt
thickness bearing
nut
surface
weight
each
limit
1
2
3
4
5
a
b
c
d
e
f
g
h
i
j
k
l
tons
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
40
55
51
109
45
80
200
140
331
252
235
38
97
22
55
60
57
115
55
85
250
160
396
304
270
45
100
50
75
70
70
140
70
105
290
186
467
359
345
54
120
67
125
85
80
155
85
130
365
220
569
428
410
64
150
105
kg
150
94
95
180
89
140
390
250
627
441
455
50
170
160
200
110
105
200
100
150
480
276
744
474
508
50
205
220
250
126
120
228
110
170
540
300
842
528
600
60
240
320
300
135
134
245
122
185
600
350
926
594
620
70
265
350
400
160
160
295
145
220
575
370
964
686
715
80
320
635
500
170
180
330
160
250
680
450
1107
763
810
90
340
803
600
190
200
350
170
275
740
490
1207
828
913
100
370
980
700
200
215
392
190
300
750
540
1257
878
993
100
400
1260
800
218
230
420
200
325
850
554
1395
959
986
110
420
1430
900
242
255
466
220
350
850
584
1454
1040
1050
120
440
1650
1000
260
270
490
240
380
855
614
1497
1116
1176
120
460
2120
1250
285
300
510
260
430
930
650
1620
1193
1275
150
530
2400
1500
295
320
550
280
460
950
680
1710
1278
1350
160
560
3600
width
width
length
width
length
length
width
eye
inside
inside
bow
In inch
6
load
body
pin
eye
bolt
thickness bearing
nut
surface
weight
each
limit
7
a
b
c
d
e
f
g
h
i
j
k
l
inch
inch
inch
inch
inch
inch
inch
inch
inch
inch
inch
inch
40
2 5/32
2
4
9
1
25
3
5
8
7
5
17
13
55
2 3/8
2
1
4
17
2
5
3
3
9
7
6
5
15
5
12
75
2 3/4
2
3
5
17
2
3
4
1
11
3
7
5
18
3
14
125
3 3/8
3
5
6
1
3
11
5
1
14
3
8
11
22
3
16
tons
8
9
10
11
12
13
14
15
16
20
/4
/4
/32
/32
/32
/32
/8
/32
/32
/4
/32
/32
/8
/8
/8
/8
/8
/8
/8
/32
/16
/16
/16
9
/8
/8
/8
15
9
1
1 1/2
3
10
5
1 3/4
4
1
13
5
2 1/8
4
7
16
1
2 1/2
6
/16
/8
/8
/4
/8
/8
/8
150
3 3/4
3
3
7
1
3
17
5
17
15
3
9
7
24
11
17
3
18
2
6
200
4 5/16
4
1
7
7
3
15
5
29
18
7
10
7
29
5
18
11
20
2
8
250
5
4
3
9
4
5
6
23
21
1
11
7
33
1
20
3
23
5
2 3/8
300
5 5/16
5
5
9
5
4
25
7
9
23
5
13
3
36
1
23
3
24
3
400
5
6 /16
6
5
11
5
5
23
8
11
22
5
14
9
38
28
1
500
6 3/4
7
1
13
6
5
9
7
26
3
17
3
43
5
30
31
7
600
7 1/2
7
7
13
25
6
23
10
7
29
1
19
1
47
1
32
5
36
700
7 7/8
8
1
15
7
7
1
11
13
29
1
21
1
49
1
34
5
39
800
8 5/8
9
1
16
9
7
7
12
3
33
1
21
7
55
37
3
38
900
9 9/16
10
18
11
8
11
13
3
33
1
23
1
41
41
1000
10 1/4
10
5
19
9
1250
11 1/4
11
7
20
1500
11 5/8
12
5
21
/4
/8
/4
/16
/16
/8
/8
/2
/8
/8
/8
/8
/8
/8
/8
/8
/32
/16
/16
/32
/32
11
/16
/32
/16
/16
/32
/32
/16
/32
/2
/8
/16
/32
/32
/32
/32
/16
/8
/8
/16
/4
/4
/8
/8
/4
/8
/8
/4
/8
/2
/2
/2
/8
/8
/8
/4
/16
/4
/4
/4
/8
57
/16
/16
/8
/2
/8
/16
/4
/8
27
/8
/2
/2
/4
/8
/8
/4
13
/16
3
/4
3
353
9
1
705
2 3/4
10
1
772
3 1/8
12
5
1400
3 9/16
13
3
1770
4
14
5
2161
4
15
3
2778
7
4 3/8
16
9
3153
3
4 3/4
17
3
3638
4674
/8
/8
/4
/8
/8
/8
/4
485
/2
/2
/8
/8
/8
/4
/16
/8
7
15
33
5
24
1
59
44
46
5
4 3/4
18
1
1
16
15
36
5
25
5
63
3
47
50
1
6
20
7
18
1
37
3
26
3
67
3
50
53
1
6 3/8
22
11
/16
/8
/8
/8
/8
/8
/8
/4
/4
/8
3
/8
148
232
9
/4
48.5
110
10
/16
lbs
/16
/4
/8
/8
/8
5291
7937
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
: bow and pin alloy steel, Grade 8, quenched and tempered
: meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade B
: hot dipped galvanized (175 ton shackle is painted)
: at no extra charges this product can be supplied with a works certificate, certificate
of basic raw material, manufacturer test certificate, EC Declaration of Conformity and
all shackles starting from 150 tons are supplied with a Lloyd’s Register of Shipping
Shackles
Green Pin® Super Shackles
G-5263
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
3.3
13.5
16
34
13.5
5
16
19
40
16
7
19
22
47
19
9.5
22
25
53
22
12.5
25
28
60
25
15
28
32
67
28
18
32
35
74
32
21
35
38
80
35
30
38
42
89
38
40
45
50
104
45
55
57
57
133
50
85
70
70
159
65
120
83
83
171
75
150*
95
95
215
89
175*
105
108
245
100
width
inside
length
inside
width
bow
length
length
bolt
e
mm
22
27
31
36
43
47
51
57
60
74
83
105
127
144
165
f
mm
51
64
76
83
95
108
115
133
146
178
197
260
329
381
400
g
mm
32
43
51
58
68
75
83
92
99
126
138
180
190
238
275
h
mm
91
114
136
157
176
197
218
240
262
314
365
468
564
667
702
i
mm
81
99
115
131
151
167
179
198
203
244
286
342
400
440
490
nut
each
j
mm
63
79
94
107
124
137
154
170
183
226
264
339
371
416
485
k
mm
11
17
20
23
25
28
31
34
19
24
27
33
40
50
60
kg
0.44
0.79
1.26
1.88
2.78
3.87
5.26
6.94
8.79
15
22.0
42.0
70.0
112
160
1
2
3
* = round headed bolt
4
5
In inch
load
bow
pin
eye
eye
limit
a
b
c
d
tons
inch
inch
inch
inch
1
5
17
3.3
/2
/8
1 11/32
/32
5
3
5
5
/8
/4
1 19/32
/8
3
7
3
7
/4
/8
1 7/8
/4
7
7
9.5
/8
1
2 3/32
/8
2 11/32
1
12.5
1
1 1/8
15
1 1/8
1 1/4
2 5/8
1 1/8
18
1 1/4
1 3/8
2 29/32
1 9/32
21
1 3/8
1 1/2
3 5/32
1 3/8
30
1 1/2
1 5/8
3 1/2
1 17/32
40
1 3/4
2
4 1/8
1 25/32
55
2 1/4
2 1/4
5 1/4
2
85
2 3/4
2 3/4
6 1/4
2 9/16
120
3 1/4
3 1/4
6 3/4
2 15/16
150*
3 3/4
3 3/4
8 1/2
3 17/32
175*
4
4 1/4
9 5/8
3 15/16
width
inside
length
inside
width
bow
length
length
bolt
nut
each
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
3 9/32
4 1/8
5
5 11/16
6 17/32
f
inch
2
2 17/32
3
3 9/32
3 3/4
4 1/4
4 17/32
5 1/4
5 3/4
7
7 3/4
10 1/4
12 15/16
15
15 3/4
g
inch
1 9/32
1 23/32
2
2 9/32
2 11/16
2 15/16
3 9/32
3 5/8
3 29/32
4 15/16
5 7/16
7 3/32
7 1/2
9 11/32
10 13/16
h
inch
3 19/32
4 1/2
5 11/32
6 5/32
6 29/32
7 3/4
8 9/16
9 7/16
10 5/16
12 11/32
14 3/8
18 3/8
22 3/16
26 9/32
27 5/8
i
inch
3 3/16
3 29/32
4 17/32
5 5/32
5 15/16
6 19/32
7 1/32
7 25/32
8
9 19/32
10 19/32
13
15 3/4
17 5/16
19 9/32
j
inch
2 1/2
3 1/8
3 23/32
4 3/16
4 7/8
5 3/8
6 3/32
6 23/32
7 3/16
8 29/32
10 3/8
13 5/16
14 5/8
16 3/8
19 1/8
k
inch
lbs
7
/16
0.97
11
/16
1.74
25
/32
2.78
29
/32
4.14
1
6.13
1 1/8
8.53
1 1/4
11.6
1 11/32 15.3
3
/4
19.38
15
/16 33.07
1 3/32 48.50
1 5/16 92.59
1 19/32 154.32
2
246.92
2 3/8 352.74
* = round headed bolt
6
7
8
9
10
11
12
13
14
15
16
21
Shackles
Green Pin® Polar Shackles
bow shackles with safety bolt, for use under extreme climatic conditions
• Material
• Safety Factor
• Standard
G-5163
: EN 13889 and
meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade B
• Finish
• Certification
• Note
: for shackles with WLL 55 and 85 tons the MBL equals 6 x WLL
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
2
13.5
16
34
13.5
3.25
16
19
40
16
4.75
19
22
47
19
6.5
22
25
53
22
8.5
25
28
60
25
9.5
28
32
67
28
12
32
35
74
32
13.5
35
38
80
35
17
38
42
89
38
25
45
50
104
45
35
50
57
111
50
42.5
57
65
134
57
55
65
70
145
65
85
75
83
163
75
1
2
3
width
inside
length
inside
width
bow
length
length
bolt
nut
each
e
mm
22
27
31
36
43
47
51
57
60
74
83
95
105
127
f
mm
51
64
76
83
95
108
115
133
146
178
197
222
260
329
g
mm
32
43
51
58
68
75
83
92
99
126
138
160
180
190
h
mm
91
114
136
157
176
197
218
240
262
314
358
414
463
556
i
mm
83
99
115
131
151
167
179
198
203
244
270
302
330
376
width
inside
length
inside
width
bow
length
length
bolt
nut
each
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
3 9/32
3 3/4
4 1/8
5
f
inch
2
2 17/32
3
3 9/32
3 3/4
4 1/4
4 17/32
5 1/4
5 3/4
7
7 3/4
8 3/4
10 1/4
12 15/16
g
inch
1 9/32
1 23/32
2
2 9/32
2 11/16
2 15/16
3 9/32
3 5/8
3 29/32
4 15/16
5 7/16
6 9/32
7 3/32
7 1/2
h
inch
3 19/32
4 1/2
5 11/32
6 5/32
6 29/32
7 3/4
8 9/16
9 7/16
10 5/16
12 11/32
14 3/32
16 5/16
18 1/4
21 29/32
i
inch
3 9/32
3 29/32
4 17/32
5 5/32
5 15/16
6 19/32
7 1/32
7 25/32
8
9 19/32
10 5/8
11 7/8
13
14 25/32
j
inch
2 1/2
3 1/8
3 23/32
4 3/16
4 7/8
5 3/8
6 3/32
6 23/32
7 3/16
8 29/32
9 13/16
11 5/16
12 15/16
14
j
mm
63
79
94
107
124
137
154
170
183
226
250
287
329
355
k
mm
13
17
20
23
25
28
31
34
19
24
27
30
33
40
kg
0.42
0.74
1.18
1.77
2.58
3.66
4.91
6.54
8.19
14.22
19.85
28.33
39.59
62
4
5
In inch
load
bow
pin
eye
eye
limit
a
b
c
d
tons
inch
inch
inch
inch
1
5
17
2
/2
/8
1 11/32
/32
5
3
5
3.25
/8
/4
1 19/32
/8
3
7
3
4.75
/4
/8
1 7/8
/4
7
7
6.5
/8
1
2 3/32
/8
2 11/32
1
8.5
1
1 1 /8
9.5
1 1 /8
1 1 /4
2 5/8
1 1/8
12
1 1 /4
1 3 /8
2 29/32
1 9/32
13.5
1 3 /8
1 1 /2
3 5/32
1 3/8
17
1 1 /2
1 5 /8
3 1/2
1 17/32
25
1 3 /4
2
4 1/8
1 25/32
35
2
2 1 /4
4 11/32
1 11/32
42.5
2 1 /4
2 9/16
5 9/32
2 1/4
55
2 1 /2
2 3 /4
5 3/4
2 9/16
85
3
3 1 /4
6 7/16
3 15/16
6
7
8
9
10
11
12
13
14
15
16
22
k
inch
17
/32
11
/16
25
/32
29
/32
1
1 1/8
1 1/4
1 11/32
3
/4
15
/16
1 3/32
1 3/16
1 5/16
1 19/32
lbs
0.92
1.62
2.59
3.9
5.69
8.06
10.81
14.42
18.06
31.34
43.77
62.46
87.27
136.69
bow shackles with safety bolt, for use under extreme climatic conditions
• Material
• Safety Factor
• Finish
P-6031
: shackle bow painted silver, pin painted green (120 tons shackle is hot dipped
galvanized)
• Certification
basic raw material, manufacturer test certificate and EC Declaration of Conformity.
All shackles starting from 150 tons are supplied with a Lloyd’s Register of Shipping
• Note
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
120
95
95
215
89
150
105
108
245
100
200
120
130
288
110
width
inside
length
inside
width
bow
length
length
bolt
e
mm
144
165
175
f
mm
381
400
500
g
mm
238
275
290
h
mm
667
702
854
i
mm
440
490
520
Shackles
Green Pin® Heavy Duty Polar Shackles
nut
each
j
mm
416
485
530
k
mm
50
60
60
kg
110
160
235
1
2
3
4
5
In inch
load
bow
pin
eye
eye
limit
a
b
c
d
tons
inch
inch
inch
inch
120
3 3 /4
3 3 /4
8 1 /2
3 17/32
150
4
4 1 /4
9 5 /8
3 15/16
200
4 3 /4
5 1 /8
11 11/32
4 5/16
width
inside
length
inside
width
bow
length
length
bolt
e
inch
5 11/16
6 17/32
6 29/32
f
inch
15
15 3/4
19 11/16
g
inch
9 11/32
10 13/16
11 7/16
h
inch
26 9/32
27 5/8
33 5/8
i
inch
17 5/16
19 9/32
20 1/2
nut
each
j
inch
16 3/8
19 1/8
20 7/8
k
inch
2
2 3/8
2 3/8
lbs
243
353
518
6
7
8
9
10
11
12
13
14
15
16
23
Shackles
Green Pin® Wide Mouth Towing Shackles
• Material
• Finish
• Certification
: at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material
: only to be used for towing!
• Note
G-4263
diameter diameter diameter width
bow
pin
eye
eye
a
mm
38
45
50
65
75
b
mm
42
50
57
70
83
c
mm
89
104
111
145
163
d
mm
38
45
50
65
75
width
inside
length
inside
width
bow
length
length
bolt
e
mm
106
127
146
165
184
f
mm
216
248
273
314
330
g
mm
159
175
207
213
254
h
mm
319
370
411
487
530
i
mm
248
296
338
389
432
width
inside
length
inside
width
bow
length
length
bolt
e
inch
4 3/16
5
5 3/4
6 1/2
7 1/4
f
inch
8 1/2
9 3/4
10 3/4
12 3/8
13
g
inch
6 9/32
6 7/8
8 5/32
8 3/8
10
h
inch
12 9/16
14 9/16
16 3/16
19 3/16
20 7/8
i
inch
9 3/4
11 11/16
13 5/16
15 5/16
17
width thickness minimum weight
nut
breaking each
load
j
k
mm
mm
tons
kg
235
19
132
12.5
265
24
180
18
307
27
240
25
343
33
330
48
404
40
600
70
1
2
3
4
5
In inch
6
diameter diameter diameter width
bow
pin
eye
eye
7
a
inch
1 1/2
1 3/4
2
2 1/2
3
8
9
10
11
12
13
14
15
16
24
b
inch
1 5/8
2
2 1/4
2 3/4
3 1/4
c
inch
3 1/2
4 1/8
4 11/32
5 3/4
6 7/16
d
inch
1 17/32
1 25/32
1 31/32
2 9/16
2 15/16
width thicknessminimum
nut breaking
load
j
k
inch
inch
tons
3
9 1/4
/4
132
15
10 7/16
/16
180
12 1/8
1 3/32
240
13 1/2
1 5/16
330
15 7/8
1 19/32
600
weight
each
lbs
27.56
39.68
55.12
105.82
154.32
Shackles
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25
Shackles
Green Pin® Trawling Shackles
bow shackles with square headed screw pin
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
:
:
:
:
:
bow and pin high tensile steel, Grade 6, quenched and tempered
MBL equals 6 x WLL
meets performance requirements of US Fed. Spec. RR-C-271, Grade A
G-4164
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
2
13.5
16
34
13.5
3.25
16
19
40
16
4.75
19
22
47
19
6.5
22
25
53
22
8.5
25
28
60
25
9.5
28
32
67
28
12
32
35
74
32
13.5
35
38
80
35
17
38
42
89
38
25
45
50
104
45
1
width
inside
length
inside
width
bow
length
length
bolt
width
e
mm
22
27
31
36
43
47
51
57
60
74
f
mm
51
64
76
83
95
108
115
133
146
178
g
mm
32
43
51
58
68
75
83
92
99
126
h
mm
91
114
136
157
176
197
218
240
262
314
i
mm
58
71
82
93
108
120
137
149
164
192
j
mm
63
79
94
107
124
137
154
170
183
226
width
inside
length
inside
width
bow
length
length
bolt
width
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
f
inch
2
2 17/32
3
3 9/32
3 3/4
4 1/4
4 17/32
5 1/4
5 3/4
7
g
inch
1 9/32
1 23/32
2
2 9/32
2 11/16
2 15/16
3 9/32
3 5/8
3 7/8
5
h
inch
3 19/32
4 1/2
5 3/8
6 3/16
6 7/8
7 3/4
8 19/32
9 7/16
10 5/16
12 11/32
i
inch
2 9/32
2 25/32
3 1/4
3 11/16
4 1/4
4 3/4
5 3/8
5 7/8
6 1/2
7 9/16
j
inch
2 1/2
3 1/8
3 23/32
4 3/16
4 7/8
5 3/8
6 3/32
6 11/16
7 1/4
8 7/8
width
bolt
head
k
mm
22
27
32
32
36
41
50
50
60
60
weight
each
width
bolt
head
k
inch
7
/8
1 3/32
1 9/32
1 9/32
1 7/16
1 5/8
1 31/32
1 31/32
2 11/32
2 11/32
weight
each
kg
0.34
0.63
1
1.44
2.21
3.18
4.32
5.67
7.36
12.38
2
3
4
5
In inch
6
load
bow
pin
eye
eye
limit
a
b
c
d
tons
inch
inch
inch
inch
1
5
17
2
/2
/8
1 11/32
/32
5
3
5
3.25
/8
/4
1 19/32
/8
3
7
3
4.75
/4
/8
1 7/8
/4
7
7
6.5
/8
1
2 3/32
/8
8.5
1
1 1/8
2 11/32
1
1 1/4
2 5/8
1 1/8
9.5
1 1/8
12
1 1/4
1 3/8
2 29/32
1 9/32
13.5
1 3/8
1 1/2
3 5/32
1 3/8
17
1 1/2
1 5/8
3 1/2
1 17/32
25
1 3/4
2
4 1/8
1 25/32
7
8
9
10
11
12
13
14
15
16
26
lbs
0.75
1.39
2.21
3.17
4.86
7.01
9.52
12.49
16.23
27.29
dee shackles with square headed screw pin
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
:
:
:
:
:
MBL equals 6 x WLL
Shackles
Green Pin® Trawling Shackles
G-4154
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
2
13.5
16
34
3.25
16
19
40
4.75
19
22
47
6.5
22
25
53
8.5
25
28
60
9.5
28
32
67
12
32
35
74
13.5
35
38
80
17
38
42
89
25
45
50
104
width
eye
width
inside
length
inside
length
length
bolt
d
mm
13.5
16
19
22
25
28
32
35
38
45
e
mm
22
27
31
36
43
47
51
57
60
74
f
mm
43
51
59
73
85
90
94
115
127
149
g
mm
85
105
125
144
161
179
199
220
239
283
h
mm
58
71
82
93
108
120
137
149
164
192
width
bolt
head
i
mm
22
27
32
32
36
41
50
50
60
60
weight
each
kg
0.32
0.58
0.92
1.33
2.03
2.88
3.96
5.24
6.8
11.22
1
2
3
4
5
In inch
load
bow
pin
eye
limit
a
b
c
tons
inch
inch
inch
1
5
2
/2
/8
1 11/32
5
3
3.25
/8
/4
1 19/32
3
7
4.75
/4
/8
1 7/8
7
6.5
/8
1
2 3/32
8.5
1
1 1/8
2 11/32
1 1/4
2 5/8
9.5
1 1/8
12
1 1/4
1 3/8
2 29/32
13.5
1 3/8
1 1/2
3 5/32
17
1 1/2
1 5/8
3 1/2
25
1 3/4
2
4 1/8
width
eye
width
inside
length
inside
length
length
bolt
d
inch
17
/32
5
/8
3
/4
7
/8
1
1 1/8
1 9/32
1 3/8
1 17/32
1 25/32
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
f
inch
1 23/32
2
2 5/16
2 7/8
3 11/32
3 9/16
3 23/32
4 17/32
5
5 7/8
g
inch
3 11/32
4 1/8
4 29/32
5 11/16
6 5/16
7 1/32
7 13/16
8 11/16
9 3/8
11 5/32
h
inch
2 9/32
2 25/32
3 1/4
3 11/16
4 1/4
4 3/4
5 3/8
5 7/8
6 1/2
7 9/16
width
bolt
head
i
inch
7
/8
1 3/32
1 9/32
1 9/32
1 7/16
1 5/8
1 31/32
1 31/32
2 11/32
2 11/32
weight
each
6
lbs
0.7
1.28
2.03
2.93
4.48
6.35
8.72
11.56
15
24.74
7
8
9
10
11
12
13
14
15
16
27
Shackles
Green Pin® Sunken Hole Shackles
bow shackles with square sunken hole screw pin
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
• Note
:
:
:
:
:
MBL equals 6 x WLL
: key for unscrewing the pin must be ordered separately
G-4169
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
2
13.5
16
34
13.5
3.25
16
19
40
16
4.75
19
22
47
19
6.5
22
25
53
22
8.5
25
28
60
25
9.5
28
32
67
28
12
32
35
74
32
13.5
35
38
80
35
17
38
42
89
38
1
width
inside
length
inside
width
bow
length
length
bolt
width
size
hole
weight
each
e
mm
22
27
31
36
43
47
51
57
60
f
mm
51
64
76
83
95
108
115
133
146
g
mm
32
43
51
58
68
75
83
92
99
h
mm
91
114
136
157
176
197
218
240
262
i
mm
51
53
74
85
99
110
122
135
145
j
mm
76
93
107
123
141
158
176
192
208
k
mm
10
10
10
12
12
16
16
16
16
kg
0.31
0.56
0.98
1.46
2.18
3.06
4.24
5.59
7.37
width
inside
length
inside
width
bow
length
length
bolt
width
size
hole
weight
each
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
f
inch
2
2 17/32
3
3 9/32
3 3/4
4 1/4
4 17/32
5 1/4
5 3/4
g
inch
1 9/32
1 23/32
2
2 9/32
2 11/16
2 15/16
3 9/32
3 5/8
3 7/8
h
inch
3 19/32
4 1/2
5 3/8
6 3/16
6 7/8
7 3/4
8 19/32
9 7/16
10 5/16
i
inch
2
2 3/32
2 29/32
3 11/32
3 29/32
4 5/16
4 13/16
5 5/16
5 3/4
j
inch
3
3 11/16
4 1/4
4 7/8
5 9/16
6 1/4
7
7 9/16
8 3/16
k
inch
3
/8
3
/8
3
/8
1
/2
1
/2
5
/8
5
/8
5
/8
5
/8
lbs
0.68
1.23
2.16
3.22
4.81
6.75
9.35
12.32
16.25
2
3
4
5
In inch
6
7
8
9
P-4170
10
11
12
13
14
15
16
28
load
bow
pin
eye
eye
limit
a
b
c
d
tons
inch
inch
inch
inch
1
5
17
2
/2
/8
1 11/32
/32
5
3
5
3.25
/8
/4
1 19/32
/8
3
7
3
4.75
/4
/8
1 7/8
/4
7
7
6.5
/8
1
2 3/32
/8
2 11/32
1
8.5
1
1 1 /8
9.5
1 1/8
1 1/4
2 5/8
1 1/8
12
1 1 /4
1 3 /8
2 29/32
1 9/32
13.5
1 3 /8
1 1 /2
3 5/32
1 3/8
17
1 1 /2
1 5 /8
3 1/2
1 17/32
dee shackles with square sunken hole screw pin
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
• Note
:
:
:
:
:
MBL equals 6 x WLL
: key for unscrewing the pin must be ordered separately
Shackles
Green Pin® Sunken Hole Shackles
G-4159
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
2
13.5
16
34
3.25
16
19
40
4.75
19
22
47
6.5
22
25
53
8.5
25
28
60
9.5
28
32
67
12
32
35
74
13.5
35
38
80
17
38
42
89
width
eye
width
inside
length
inside
length
length
bolt
size
hole
weight
each
d
mm
13.5
16
19
22
25
28
32
35
38
e
mm
22
27
31
36
43
47
51
57
60
f
mm
43
51
59
73
85
90
94
115
127
g
mm
85
105
125
144
161
179
199
220
239
h
mm
51
53
74
85
99
110
122
135
145
i
mm
10
10
10
12
12
16
16
16
16
kg
0.34
0.6
0.98
1.26
2.14
3.05
3.56
5.17
6.84
1
2
3
4
5
In inch
P-4170
load
bow
pin
eye
limit
a
b
c
tons
inch
inch
inch
1
5
/2
/8
1 11/32
2
5
3
/8
/4
1 19/32
3.25
3
7
/
/
1 7/8
4.75
4
8
7
/8
1
2 3/32
6.5
2 11/32
8.5
1
1 1/8
1 1/4
2 5/8
9.5
1 1/8
1
3
/
1
/
2 29/32
12
1
4
8
1 1/2
3 5/32
13.5
1 3/8
1
5
1
/
1
/
3
/2
17
1
2
8v
width
eye
width
inside
length
inside
length
length
bolt
size
hole
weight
each
6
d
inch
17
/32
5
/8
3
/4
7
/8
1
1 1/8
1 9/32
1 3/8
1 17/32
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
f
inch
1 23/32
2
2 5/16
2 7/8
3 11/32
3 9/16
3 23/32
4 17/32
5
g
inch
3 11/32
4 1/8
4 29/32
5 11/16
6 5/16
7 1/32
7 13/16
8 11/16
9 3/8
h
inch
2
2 3/32
2 29/32
3 11/32
3 29/32
4 5/16
4 13/16
5 5/16
5 3/4
i
inch
3
/8
3
/8
3
/8
1
/2
1
/2
5
/8
5
/8
5
/8
5
/8
lbs
0.75
1.33
2.15
2.77
4.72
6.72
7.84
11.4
15.08
7
8
9
10
11
12
13
14
15
16
29
Shackles
Mooring Shackles
bow shackles with screw pin
• Material
• Finish
• Note
: mild steel, untreated, Grade 3
: self coloured
: not to be used for lifting applications
S-1165
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
weight
each
a
mm
32
38
45
50
65
b
mm
32
38
45
50
65
c
mm
74
89
104
111
145
d
mm
64
76
90
100
130
e
mm
134
160
189
210
273
f
mm
96
114
135
155
195
kg
4.2
7.8
12.5
17.4
35.6
1
2
3
4
5
Crown Shackles
dee shackles with round pin, for anchoring applications
6
•
•
•
•
7
Material
Finish
Pin
Note
:
:
:
:
high tensile steel, normalized, Grade 4
self coloured
to be fastened by welding
non-standard dimensions upon request
8
S-3557
9
10
11
12
13
14
15
16
30
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
weight
each
a
mm
13.5
16
19
22
28
b
mm
16
19
22
25
32
c
mm
34
40
47
53
67
d
mm
21
27
30
33
42
e
mm
49
61
67
73
91
kg
0.3
0.6
0.9
1.3
2.7
Shackles
Crown Shackles
dee shackles with round pin, for anchoring applications
•
•
•
•
•
Material
Finish
Pin
Note
Certification
:
:
:
:
:
high tensile steel, normalized, Grade 4
self coloured
to be fastened by welding
non-standard dimensions upon request
at no extra charges this product can be supplied with a works
certificate and/or certificate of basic raw material
S-3559
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
32
42
50
60
65
75
80
90
100
110
130
140
150
160
170
180
190
b
mm
35
45
52
68
72
80
90
100
110
125
140
150
160
170
180
190
200
c
mm
83
110
134
150
159
172
190
215
245
270
308
335
350
360
390
410
430
d
mm
47
60
73
90
100
110
125
140
155
175
200
210
220
235
250
270
280
e
mm
111
139
158
211
221
246
276
307
339
385
430
475
525
560
610
650
690
weight
each
kg
4
8
13.3
25
32
50
65
94
127
178
269
335
413
500
601
716
839
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
31
Shackles
Shackles generally to DIN 82016 type A
•
•
•
•
•
S-3461
G-3461
Material
Safety Factor
Standard
Finish
Certification
no.
8
10
12
16
20
25
:
:
:
:
:
bow and pin high tensile steel, Grade 4
MBL equals 4 x WLL
generally to DIN 82016 type A
hot dipped galvanized or self coloured
working thickness thickness diameter diameter
load
bow
bow
pin
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
8
54
38
45
90
10
60
42
48
96
12
67
47
52
104
16
76
52
60
120
20
85
58
68
136
25
92
63
72
144
width
inside
length
inside
width
bow
weight
each
e
mm
60
66
73
81
90
100
f
mm
152
166
184
210
231
254
g
mm
93
102
114
128
140
155
kg
8.44
11
14.5
19.7
29.6
37.4
weight
each
1
2
3
4
5
Shackles generally to DIN 82016 type B
6
•
•
•
•
•
7
8
Material
Safety Factor
Standard
Finish
Certification
• Note
9
no.
10
S-3466
G-3466
11
12
13
14
15
16
32
8
10
12
16
20
25
32
40
50
63
80
100
:
:
:
:
:
MBL equals 4 x WLL
generally to DIN 82016 type B
: with screw collar pin
: up to size no. 25
with hand-grip
: from size no. 32
load
bow
bow
pin
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
8
54
38
45
90
10
60
42
48
96
12
67
47
52
104
16
76
52
60
120
20
85
58
68
136
25
92
63
72
144
32
100
70
80
160
40
107
79
90
180
50
120
88
100
200
63
135
96
110
220
80
150
110
125
250
100
165
125
140
280
width
inside
length
inside
width
bow
e
mm
60
66
73
81
90
100
110
125
140
155
175
200
f
mm
152
166
184
210
231
254
285
315
360
395
447
500
g
mm
93
102
114
128
140
155
175
195
220
245
275
305
kg
9.3
12
15.7
21
31.4
39.4
53.3
75.3
105
137
200
300
Shackles
Shackles generally to DIN 82101 type A
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
• Note
S-3351
G-3351
no.
0.1
0.16
0.25
0.4
0.6
1
1.6
2
2.5
3
4
5
6
8
10
12
16
20
25
:
:
:
:
:
MBL equals 4 x WLL
generally to DIN 82101 type A
: shackle no. 0.1 will not have any markings as it is too small
load
bow
bow
pin
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
0.1
5
4
5
10
0.16
6
5
6
12
0.25
8
7
8
16
0.4
10
8
10
20
0.63
12
10
12
24
1
15
13
16
32
1.6
19
17
20
40
2
21
19
22
44
2.5
23
21
24
48
3.15
26
24
27
54
4
29
27
30
60
5
33
30
36
72
6.3
37
34
39
78
8
41
38
45
90
10
45
42
48
96
12
50
47
52
104
16
55
52
60
120
20
61
58
68
136
25
67
63
72
144
width
inside
e
mm
7
8
11
14
17
21
27
30
33
38
42
47
53
60
66
73
81
90
100
length
inside
f
mm
15.5
18
24
30
36
49
61
67
73
83.5
91
111
119.5
139.5
147
158
185
211
221
weight
each
kg
0.017
0.024
0.054
0.097
0.18
0.3
0.57
0.975
1.3
1.85
2.53
4
5.3
7.9
10
13.5
19.2
28
34
1
2
3
4
5
Shackles generally to DIN 82101 type B
dee shackles with counter sunk screw pin
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
• Note
S-3352
G-3352
no.
0.1
0.16
0.25
0.4
0.6
1
1.6
2
2.5
3
4
5
6
8
10
6
:
:
:
:
:
MBL equals 4 x WLL
generally to DIN 82101 type B
: shackle no. 0.1 will not have any markings as it is too small
working thickness thickness diameter diameter width
load
bow
bow
pin
eye
inside
limit
a
b
c
d
e
tons
mm
mm
mm
mm
mm
0.1
5
4
5
10
7
0.16
6
5
6
12
8
0.25
8
7
8
16
11
0.4
10
8
10
20
14
0.63
12
10
12
24
17
1
15
13
16
32
21
1.6
19
17
20
40
27
2
21
19
22
44
30
2.5
23
21
24
48
33
3.15
26
24
27
54
38
4
29
27
30
60
42
5
33
30
36
72
47
6.3
37
34
39
78
53
8
41
38
45
90
60
10
45
42
48
96
66
length
inside
f
mm
15.5
18
24
30
36
49
61
67
73
83.5
91
111
119.5
139.5
147
7
8
9
weight
each
10
kg
0.014
0.023
0.052
0.093
0.173
0.29
0.543
0.95
1.23
1.8
2.6
3.8
5.2
7.6
9.7
11
12
13
14
15
16
33
Shackles
Shackles generally to DIN 82101 type C
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
• Note
no.
S-3356
G-3356
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
34
0.4
0.6
1
1.6
2
2.5
3
4
5
6
8
10
12
16
20
25
32
40
50
63
80
100
:
:
:
:
:
MBL equals 4 x WLL
generally to DIN 82101 type C
: with screw collar pin
: up to size no. 25
with hand-grip
: from size no. 32
load
bow
bow
pin
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
0.4
10
8
10
20
0.63
12
10
12
24
1
15
13
16
32
1.6
19
17
20
40
2
21
19
22
44
2.5
23
21
24
48
3.15
26
24
27
54
4
29
27
30
60
5
33
30
36
72
6.3
37
34
39
78
8
41
38
45
90
10
45
42
48
96
12
50
47
52
104
16
55
52
60
120
20
61
58
68
136
25
67
63
72
144
32
74
70
80
160
40
84
79
90
180
50
93
88
100
200
63
101
96
110
220
80
115
110
125
250
100
130
125
140
280
width
inside
e
mm
14
17
21
27
30
33
38
42
47
53
60
66
73
81
90
100
110
125
140
155
175
200
length
inside
weight
each
f
mm
30
36
49
61
67
73
83.5
91
111
119.5
139.5
147
158
185
211
221
246
276
307
339
385.5
430
kg
0.113
0.2
0.37
0.686
1.125
1.5
2.15
2.93
4.7
6.33
8.5
10.8
14.4
20.5
29.5
36
49
75
100
140
200
280
Shackles
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
35
Shackles
Yellow Pin Shackles
•
•
•
•
Material
Standard
Finish
Note
:
:
:
:
generally to US Fed. Spec. RR-C-271
import quality
G-3161
working
load
limit
tons
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
1
2
3
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
weight
each
a
mm
5
6
8
10
11
13
16
19
22
25
28
32
35
38
45
b
mm
6
8
10
11
13
16
19
22
25
28
32
35
38
42
50
c
mm
14
16
19
23
27
30
38
46
53
61
68
76
84
92
106
d
mm
9.5
12
13.5
17
19
20
27
32
36
43
46
51
57
60
73
e
mm
22
29
31
37
43
48
60
71
84
95
108
119
133
146
177
f
mm
15
20
21
26
29
33
43
50
58
68
74
82
92
98
127
kg
0.03
0.05
0.09
0.14
0.17
0.33
0.62
1.07
1.64
2.28
3.36
4.31
6.14
7.81
12.61
4
5
Yellow Pin Shackles
bow shackles with safety pin
6
•
•
•
•
7
8
Material
Standard
Finish
Note
:
:
:
:
import quality
G-3163
9
working
load
limit
10
tons
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
11
12
13
14
15
16
36
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
weight
each
a
mm
13
16
19
22
25
28
32
35
38
45
b
mm
16
19
22
25
28
32
35
38
42
50
c
mm
30
38
46
53
61
68
76
84
92
106
d
mm
20
27
32
36
43
46
51
57
60
73
e
mm
48
60
71
84
95
108
119
133
146
177
f
mm
33
43
50
58
68
74
82
92
98
127
kg
0.36
0.76
1.23
1.79
2.57
3.75
5.32
7.19
9.44
15.4
Shackles
Yellow Pin Shackles
•
•
•
•
Material
Standard
Finish
Note
:
:
:
:
import quality
G-3151
working
load
limit
tons
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
weight
each
a
mm
5
6
8
10
11
13
16
19
22
25
28
32
35
38
45
b
mm
6
8
10
11
13
16
19
22
25
28
32
35
38
42
50
c
mm
14
16
19
23
27
30
38
46
53
61
68
76
84
92
106
d
mm
9.5
12
13.5
17
19
20
27
32
36
43
46
51
57
60
73
e
mm
27
22
26
32
37
41
51
60
71
81
90
100
111
122
146
kg
0.01
0.05
0.08
0.13
0.2
0.27
0.57
1.19
1.43
2.16
3.06
4.11
5.28
7.24
12.14
1
2
3
4
5
Yellow Pin Shackles
dee shackles with safety pin
6
•
•
•
•
Material
Standard
Finish
Note
:
:
:
:
import quality
7
8
G-3153
working
load
limit
tons
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
weight
each
a
mm
13
16
19
22
25
28
32
35
38
45
b
mm
16
19
22
25
28
32
35
38
42
50
c
mm
30
38
46
53
61
68
76
84
92
106
d
mm
20
27
32
36
43
46
51
57
60
73
e
mm
41
51
60
71
81
90
100
111
122
146
kg
0.34
0.67
1.14
1.75
2.52
3.45
4.91
6.24
8.4
14.26
9
10
11
12
13
14
15
16
37
Shackles
Shackles generally to B.S. 3032 table 3
large bow shackles with screw collar pin
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
:
:
:
:
:
bow and pin alloy steel, EN14a
MBL equals 4 x WLL
generally to B.S. 3032 table 3
hot dipped galvanized, electro-galvanized or self coloured
working
load
limit
diameter
bow
diameter
pin
diameter
eye
inside
width
inside
length
width
bow
weight
each
a
mm
6
10
13
16
19
22
25
28
32
35
38
42
44
48
51
57
60
67
73
79
86
95
108
117
b
mm
10
13
16
19
22
25
28
32
35
38
44
48
51
54
57
63
67
73
79
86
92
102
117
127
c
mm
19
25
32
38
44
51
57
63
70
76
89
94
102
108
114
127
133
146
159
171
184
203
235
254
d
mm
13
16
22
28
35
41
44
51
57
63
70
76
86
92
98
105
111
121
133
146
159
171
197
216
e
mm
28
41
54
70
86
98
108
124
137
152
168
187
206
222
238
257
273
302
330
359
387
429
483
533
f
mm
19
25
32
41
51
57
64
73
83
89
98
111
121
130
140
152
162
178
197
213
229
254
286
308
kg
0.12
0.18
0.37
0.72
1.20
1.85
2.61
3.78
5.17
6.46
8.34
11.1
14.5
17.8
25.5
34.4
36.8
45
62.2
81.8
95
131
194
274
S-2761
E-2761
G-2761
tons
0.15
0.45
0.75
1.25
2
2.75
3.75
4.75
5.75
7.25
8.5
9.5
11.5
13
15
18.5
20
25
30
35
40
50
65
80
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
38
Shackles
small bow shackles with screw collar pin
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
:
:
:
:
:
MBL equals 4 x WLL
working
load
limit
diameter
bow
diameter
pin
diameter
eye
inside
width
inside
length
width
bow
weight
each
a
mm
6
10
13
16
19
22
25
28
32
35
38
41
44
48
51
54
57
63
70
76
79
89
102
114
b
mm
10
13
16
19
22
25
28
32
35
38
44
48
51
54
57
60
63
70
79
86
89
98
114
127
c
mm
19
25
32
38
44
51
57
63
70
76
89
95
102
108
114
121
127
140
159
171
178
203
229
254
d
mm
13
16
22
28
35
38
44
51
57
60
67
73
79
86
92
95
105
114
127
137
143
159
184
206
e
mm
25
38
51
64
76
89
102
114
127
140
152
165
178
191
203
216
229
254
279
305
318
356
406
457
f
mm
16
22
29
38
44
51
60
67
76
83
89
98
105
114
121
127
137
152
168
184
191
213
244
273
kg
0.11
0.17
0.35
0.66
1.06
1.68
2.47
3.48
4.79
5.95
7.55
9.79
12.5
15.3
21.8
28.9
30.9
37.8
52.6
69.5
78.1
109
163
235
S-2765
E-2765
G-2765
tons
0.2
0.5
1
1.5
2
3
4
5
6.25
7.5
9.25
10.5
12.5
14.25
16.5
18.5
20
25
30
35
40
50
65
80
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
39
Shackles
large dee shackles with screw collar pin
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
:
:
:
:
:
MBL equals 4 x WLL
S-2751
E-2751
G-2751
working
load
limit
tons
0.25
0.5
0.75
1.5
2
3
3.75
5
6
7
9.5
11.25
13
14.25
16.25
18
20
25
30
35
40
50
65
80
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
40
diameter
bow
diameter
pin
diameter
eye
inside
width
inside
length
weight
each
a
mm
6
10
13
16
19
22
25
28
32
35
38
42
44
48
51
54
57
64
70
76
79
89
102
114
b
mm
10
13
16
19
22
25
28
32
35
38
45
48
51
54
57
60
64
73
79
86
89
102
114
127
c
mm
19
25
32
38
44
51
57
64
70
76
83
89
95
108
114
121
127
146
159
171
178
203
229
254
d
mm
13
19
28
32
38
44
51
54
60
67
70
76
83
92
98
105
108
121
133
146
149
171
191
219
e
mm
25
38
54
64
73
83
95
105
114
127
137
146
156
178
187
197
210
235
260
279
292
330
375
419
kg
0.11
0.17
0.35
0.66
1.02
1.57
2.3
3.2
4.3
5.4
6.8
8.7
11
14.3
20
26.4
28.3
35
49
63.6
71.7
101
151
215
Shackles
small dee shackles with screw collar pin
•
•
•
•
•
Material
Safety Factor
Standard
Finish
Certification
:
:
:
:
:
MBL equals 4 x WLL
S-2755
E-2755
G-2755
working
load
limit
tons
0.3
0.6
1
1.75
2.5
3.5
4.5
5.5
7
8
10.75
13
14.75
16.75
19
20
25
30
35
40
50
65
80
diameter
bow
diameter
pin
diameter
eye
a
mm
6
10
13
16
19
22
25
28
32
35
38
42
44
48
51
54
60
64
70
73
83
92
102
b
mm
10
13
16
19
22
25
28
32
35
38
45
48
51
54
57
60
70
73
79
83
95
108
117
c
mm
19
25
32
38
44
51
57
64
70
83
89
95
102
108
114
121
140
146
159
165
190
216
235
width
inside
d
mm
9.5
16
22
25
32
35
38
44
48
54
60
64
70
73
76
83
92
98
108
111
127
140
156
length
inside
weight
each
e
mm
22
35
48
57
70
83
92
105
114
127
140
149
162
171
184
197
219
229
254
264
298
333
368
kg
0.1
0.16
0.31
0.59
0.98
1.55
2.2
3.1
4.2
5.1
6.6
8.1
10.5
13.3
19.2
22.4
25.3
31.5
47
60.2
68.5
98
147
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
41
Shackles
Fishing Shackles
bow shackles with square head screw pin and one flattened eye
• Material
• Safety Factor
• Finish
: high tensile steel
: painted red
P-3780
h
working thickness thickness diameter diameter diameter
load
bow
bow
pin
eye
flattened
limit
eye
a
b
c
d
e
tons
mm
mm
mm
mm
mm
2
16
13
16
31
26
4.75
25
19
22
46
34
6.5
29
22
25
53
43
g
c
width
inside
length
inside
width
bow
f
mm
21
32
37
g
mm
44
65
71
h
mm
33
42
51
weight
each
kg
0.36
1.06
1.60
f
1
b
a
2
3
e
4
d
5
Fishing Shackles
bow shackles with square sunken hole screw pin and one flattened eye
6
• Material
• Safety Factor
• Finish
7
8
: painted red
P-3790
h
9
10
load
bow
bow
pin
eye
flattened
limit
eye
a
b
c
d
e
tons
mm
mm
mm
mm
mm
g
11
2
4.75
6.5
c
12
f
b
a
13
14
i
15
e
d
16
42
16
25
29
13
19
22
16
22
25
31
46
53
26
34
43
width
inside
length
inside
width
bow
size
hole
weight
each
f
mm
g
mm
h
mm
i
mm
kg
21
32
37
44
65
71
33
42
51
10
12
12
0.30
0.93
1.46
Shackles
Fishing Shackles
dee shackles with square head screw pin and one flattened eye
• Material
• Safety Factor
• Finish
: painted red
P-3785
load
bow
bow
pin
eye
flattened
limit
eye
a
b
c
d
e
tons
mm
mm
mm
mm
mm
g
2
4.75
6.5
c
16
25
29
13
19
22
16
22
25
31
46
53
26
34
43
width
inside
length
inside
weight
each
f
mm
g
mm
kg
21
32
37
41
60
71
0.36
1.06
1.60
f
1
b
a
2
3
4
e
d
5
Fishing Shackles
dee shackles with square sunken hole screw pin and one flattened eye
6
• Material
• Safety Factor
• Finish
: painted red
7
8
P-3795
load
bow
bow
pin
eye
flattened
limit
eye
a
b
c
d
e
tons
mm
mm
mm
mm
mm
2
16
13
16
31
26
4.75
25
19
22
46
34
6.5
29
22
25
53
43
g
c
width
inside
length
inside
size
hole
weight
each
f
mm
21
32
37
g
mm
41
60
71
h
mm
10
12
12
kg
0.30
0.93
1.46
9
10
11
f
12
b
a
13
h
14
15
e
d
16
43
Shackles
Fishing Shackles
bow shackles with square head screw pin
• Material
• Safety Factor
• Finish
: mild steel
: painted blue
P-3764
working
load
limit
tons
1.5
2.5
3
4
5
6.5
8
9
1
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
a
mm
13
16
20
22
25
28
32
36
b
mm
16
20
22
25
28
32
36
38
c
mm
32
40
48
53
60
67
71
76
d
mm
25
32
38
44
51
56
64
70
e
mm
48
64
79
87
100
114
126
140
f
mm
36
48
60
66
75
86
96
105
weight
each
kg
0.37
0.71
1.24
1.68
2.42
3.42
4.85
6.32
2
3
4
5
Fishing Shackles
dee shackles with square head screw pin
6
• Material
• Safety Factor
• Finish
7
8
: mild steel
: painted blue
P-3754
9
working
load
limit
10
tons
1.5
2.5
3
4
5
6.5
8
9
11
12
13
14
15
16
44
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
13
16
20
22
25
28
32
36
b
mm
16
20
22
25
28
32
36
38
c
mm
32
40
48
53
60
67
71
76
d
mm
25
32
38
44
51
56
64
70
e
mm
48
64
75
83
100
104
120
131
weight
each
kg
0.36
0.69
1.18
1.61
2.35
3.22
4.63
5.96
Shackles
Fishing Shackles
• Material
• Finish
• Note
: self coloured
S-3770
a
e
b
d
c
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
14
16
20
22
b
mm
14
16
20
22
c
mm
29
32
38
46
d
mm
28
32
36
44
e
mm
56
64
60
88
weight
each
kg
0.36
0.53
0.84
1.38
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
45
Shackles
Commercial Shackles
• Material
• Finish
• Note
: electro-galvanized or self coloured
S-1161
E-1161
1
2
3
4
5
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
a
mm
5
6
8
10
11
12
14
16
20
22
25
28
32
38
45
50
57
65
b
mm
5
6
8
10
11
12
14
16
20
22
25
28
32
38
45
50
57
65
c
mm
10
12
16
20
22
24
28
32
40
44
50
56
64
76
90
100
114
130
d
mm
10
12
16
20
22
24
28
32
40
44
50
56
64
76
90
100
114
130
e
mm
20
24
32
40
44
48
56
64
80
88
100
112
128
152
180
200
228
260
f
mm
15
18
24
30
33
36
42
48
60
66
75
84
96
114
135
150
171
195
weight
per
100 pcs
kg
1.54
2.66
6.29
12.3
16.4
21.2
33.7
50.3
98.3
131
192
270
403
674
1120
1536
2276
3375
Commercial Shackles
bow shackles with square head screw pin
6
• Material
• Finish
• Note
7
8
: self coloured
S-1164
9
10
11
12
13
14
15
16
46
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
a
mm
6
8
10
11
12
14
16
20
22
25
28
32
38
b
mm
6
8
10
11
12
14
16
20
22
25
28
32
38
c
mm
12
16
20
22
24
28
32
40
44
50
56
64
76
d
mm
12
16
20
22
24
28
32
40
44
50
56
64
76
e
mm
24
32
40
44
48
56
64
80
88
100
112
128
152
f
mm
18
24
30
33
36
42
48
60
66
75
84
96
114
weight
per
100 pcs
kg
2.7
6.4
12.5
16.6
21.6
34.3
51.2
100
133
195
275
410
686
Shackles
Commercial Shackles
bow shackles with counter sunk screw pin
• Material
• Finish
• Note
S-1162
E-1162
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
a
mm
8
10
11
12
14
16
20
22
25
b
mm
8
10
11
12
14
16
20
22
25
c
mm
16
20
22
24
28
32
40
44
50
d
mm
16
20
22
24
28
32
40
44
50
e
mm
32
40
44
48
56
64
80
88
100
f
mm
24
30
33
36
42
48
60
66
75
weight
per
100 pcs
kg
6
11.6
15.5
20.1
31.9
47.6
93.1
124
182
1
2
3
4
5
Commercial Shackles
6
• Material
• Finish
• Note
7
8
S-1151
E-1151
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
5
6
8
10
11
12
14
16
20
22
25
28
32
38
45
50
57
65
b
mm
5
6
8
10
11
12
14
16
20
22
25
28
32
38
45
50
57
65
c
mm
10
12
16
20
22
24
28
32
40
44
50
56
64
76
90
100
114
130
d
mm
10
12
16
20
22
24
28
32
40
44
50
56
64
76
90
100
114
130
e
mm
19
25
32
38
44
51
53
64
76
89
100
115
127
152
180
200
220
247
9
weight
per
100 pcs
10
kg
1.47
2.56
6.06
11.8
15.8
20.5
32.5
48.5
94.7
126
185
260
388
650
1080
1480
2192
3252
11
12
13
14
15
16
47
Shackles
Commercial Shackles
• Material
• Finish
• Note
: self coloured
S-1154
1
2
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
6
8
10
11
12
14
16
20
22
25
28
32
38
b
mm
6
8
10
11
12
14
16
20
22
25
28
32
38
c
mm
12
16
20
22
24
28
32
40
44
50
56
64
76
d
mm
12
16
20
22
24
28
32
40
44
50
56
64
76
e
mm
24
32
40
44
48
56
64
80
88
100
112
128
152
weight
per
100 pcs
kg
2.6
6.17
12.0
16
20.8
33.1
49.4
96.4
128
188
265
395
661
3
4
5
Commercial Shackles
dee shackles with counter sunk screw pin
6
• Material
• Finish
• Note
7
8
S-1152
E-1152
9
10
11
12
13
14
15
16
48
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
8
10
11
12
14
16
20
22
25
b
mm
8
10
11
12
14
16
20
22
25
c
mm
16
20
22
24
28
32
40
44
50
d
mm
16
20
22
24
28
32
40
44
50
e
mm
32
40
44
48
56
64
80
88
100
weight
per
100 pcs
kg
5.72
11.2
14.9
19.3
30.7
45.8
89.5
119
175
Shackles
Commercial Shackles
danlino V shackles with square head screw pin
• Material
• Finish
• Note
: self coloured
S-1170
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
32
b
mm
32
c
mm
64
d
mm
78
e
mm
120
weight
per
100 pcs
kg
470
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
49
Thimbles
Applications
Thimbles are used to protect steel wire rope, fibre rope or synthetic rope.
They are available in various models and sizes. All indicated types of thimbles can be used in combination
with the above mentioned types of ropes.
Range
Van Beest offers a wide range of thimbles, from nationally standardized models to all types of commercially
available thimbles.
Design
Thimbles can be cold-rolled, hot-rolled or die-cast, depending on the specific use of the thimbles.
Finish
The finish is either painted, electro-galvanized or hot dipped galvanized, unless otherwise specified.
2
Certification
Upon request, all thimbles can be supplied with a works certificate.
It is required that the thimbles are regularly inspected and the inspection should take place in accordance with
the standards given in the country of use.
This is required because the products in use may be affected by wear, misuse, overloading with a consequence
of deformation and or alteration of the steel structure.
The dimensions of the thimbles must be so that the (wire) rope fits properly into the groove of the thimble.
The nominal size of the thimble is the diameter of the (wire) rope with which it is intended to be used.
For (wire) ropes of intermediate sizes, the next larger size of thimble must be used.
Before use, check if the thimble is free from impurities, sharp edges, cracks or other irregularities which may
damage the wire rope and therefore affect the strength or reliability of the wire rope.
50
Thimbles
Thimbles
standard commercial
• Material
• Finish
• Certification
: mild steel
: electro-galvanized
: a works certificate can be supplied upon request
diameter
rope
width
groove
length
width
length
inside
width
inside
mm
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
32
a
mm
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
32
b
mm
25
31
37
44
51
57
64
70
76
82
89
102
115
127
140
152
165
178
203
c
mm
19
22
29
32
38
42
44
51
57
60
64
69
79
89
102
105
115
121
133
d
mm
16
22
26
32
34
38
42
48
51
57
60
67
76
83
88
102
110
115
140
e
mm
11
16
19
22
24
29
32
35
38
40
42
45
51
54
64
68
73
79
93
E-6110
weight
per
100 pcs
kg
0.4
0.8
1.4
2
2.8
3
4.8
7.5
8
10
15
22
25
32
46
66
77
80
130
1
2
3
4
5
6
Thimbles
heavy duty stub-end
• Material
• Finish
• Certification
7
: mild steel
diameter
rope
width
groove
length
length
inside
width
inside
thickness
back
mm
8
10
12
14
16
18
20
22
24
28
32
36
40
44
50
56
64
a
mm
8
10
12
14
16
18
20
22
24
28
32
36
40
44
50
56
64
b
mm
51
64
76
89
102
114
127
140
152
178
203
229
254
279
305
356
407
c
mm
35
47
57
65
76
86
94
107
114
130
157
177
198
214
215
245
275
d
mm
22
30
35
45
50
53
60
65
70
80
100
115
120
130
140
160
180
e
mm
4
4
5
6
6
8
9
10
10
10.5
10.5
12
12
15
20
20
20
E-6120
8
weight
per
100 pcs
kg
6
7
14
22
24
43
65
93
102
135
162
363
376
608
960
1400
1700
9
10
11
12
13
14
15
16
51
Thimbles
Thimbles
generally to DIN 6899 (B)
• Material
• Standard
• Finish
: mild steel
: generally to DIN 6899 (B)
: thimbles for rope diameters up to and including 6 mm are
electro-galvanized, other diameters are hot dipped galvanized
• Certification
E-6131
G-6131
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
52
diameter
rope
width
groove
length
length
inside
width
inside
thickness
back
mm
2.5
3.5
4
5
6
7
9
11
13
13
15
16
17
18
20
22
24
26
28
30
32
34
36
38
40
42
a
mm
3
4
5
6
7
8
10
12
13
14
16
17
18
20
22
24
26
28
30
32
34
36
38
40
42
45
b
mm
22
26
32
38
44
51
57
64
70
76
83
89
95
102
114
127
140
152
165
178
203
216
229
241
254
305
c
mm
19
21
23
25
28
32
38
45
48
51
58
61
64
72
80
90
99
112
120
128
152
160
176
184
192
240
d
mm
12
13
14
16
18
20
24
28
30
32
36
38
40
45
50
56
62
70
75
80
95
100
110
115
120
150
e
mm
1.6
1.6
1.9
2.4
2.4
2.8
3.1
3.3
3.3
3.7
3.8
4.7
4.7
5.7
5.7
6.5
6.8
8
8
8
8.5
8.5
8.5
10.5
10.5
10.5
weight
per
100 pcs
kg
0.5
0.8
1
1.6
1.9
3
4.7
6.8
8
10
14.5
18
20
29
32
47
59
80
110
123
156
176
192
292
320
364
Thimbles
Thimbles
generally to DIN 6899 (C)
•
•
•
•
Material
Standard
Finish
Certification
:
:
:
:
mild steel
generally to DIN 6899 (C)
a works certificate can be supplied upon request
diameter
rope
width
groove
length
inside
mm
11
12
14
16
18
20
22
24
26
28
32
36
40
44
48
a
mm
12
13
15
18
20
22
24
26
28
31
35
40
44
48
53
b
mm
59
64
75
86
96
107
118
128
139
150
171
192
215
235
257
width
inside
thickness
back
G-6132
c
mm
27.5
30
35
40
45
50
55
60
65
70
80
90
100
110
120
d
mm
6.5
7
8
9.5
11
12
13
14.5
15.5
17
19
21.5
24
26.5
29
weight
per
100 pcs
kg
24
25
35
65
102
135
179
227
264
400
520
575
1010
1180
1940
1
2
3
4
5
Thimbles
generally to DIN 83311
6
•
•
•
•
7
Material
Standard
Finish
Certification
:
:
:
:
mild steel
8
nominal
size
width
groove
length
inside
0.4
0.6
1
1.6
2
2.5
3
4
5
6
8
10
12
16
20
25
31
40
a
mm
8
11
13
15
17
19
21
24
28
30
34
38
42
46
50
56
62
68
b
mm
36
50
60
68
76
85
95
110
125
135
150
170
190
205
225
250
280
306
G-6133
width
inside
c
mm
20
28
32
38
42
48
53
60
70
75
85
95
105
115
125
140
155
170
thickness
back
d
mm
3
4
5
6
7
8
9
10
10.5
12
13
15
16
16
18
20
21
23
weight
per
100 pcs
9
10
kg
4.5
9.5
18
24
38
50
70
110
141
254
282
418
513
550
930
1303
1363
1930
11
12
13
14
15
16
53
Thimbles
Thimbles
• Material
• Standard
• Finish
: mild steel
: generally to DIN 3090
: for diameter 4 and 6 mm electro-galvanized
other diameters hot dipped galvanized
• Certification
E-6135
G-6135
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
54
diameter
wire
rope
mm
4
6
8
10
12
14
16
18
20
22
24
26
28
32
36
40
44
48
52
56
60
64
68
72
76
80
width
groove
width
overall
width
inside
length
inside
a
mm
5
7
9
11
13
16
18
20
22
24
26
29
31
35
40
44
48
53
57
62
66
70
75
79
84
88
b
mm
9
12
13
16
19
22
25
27
32
33
37
46
50
55
60
65
70
75
80
85
90
95
100
105
115
120
c
mm
10
15
20
25
30
35
40
45
50
55
60
65
70
80
90
100
110
120
130
140
150
160
170
180
190
200
d
mm
20
30
40
50
60
70
80
90
100
110
120
130
140
160
180
200
220
240
260
280
300
320
340
360
380
400
thickness thickness
back
e
mm
5.1
7.1
11
14
16
17
19
21
23
24
27
30
33
38
42
46
53
58
64
67
70
78
81
84
87
90
f
mm
2.1
2.6
4
5
6
7
8
9
10
10
11
12
12
14
16
18
20
22
25
25
25
30
30
30
30
30
weight
per
100 pcs
kg
1.4
3
7.1
17
24
36
50
62
90
100
130
220
240
270
430
570
850
1120
1530
2148
2300
3500
3700
4100
4600
5400
Thimbles
Thimbles
•
•
•
•
Material
Standard
Finish
Certification
:
:
:
:
cast mild steel, (GTW 40)
self coloured
diameter
rope
width
groove
width
length
diameter
length
mm
8
10
12
14
16
18
20
22
24
26
28
32
36
40
44
48
52
56
64
72
80
a
mm
9
11
13
16
18
20
22
24
26
29
31
35
40
44
48
53
57
62
70
79
88
b
mm
40
50
60
70
80
90
100
110
120
130
140
160
180
200
220
240
260
280
320
360
400
c
mm
66
82
98
114
130
145
161
177
193
209
224
256
288
320
352
384
416
448
512
576
640
d
mm
14
18
21
25
28
31
35
38
41
44
47
53
59
65
70
76
81
86
95
104
112
e
mm
16
18
20
22
24
26
28
32
36
40
44
48
52
56
64
72
80
S-6134
weight
per
100 pcs
kg
18
32
52
80
90
121
161
211
271
355
420
630
884
1100
1500
2000
2500
3200
4600
6600
9000
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
55
Thimbles
Thimbles
generally to EN13411-1
•
•
•
•
G-6170
Material
Standard
Finish
Certification
width
groove
length
length
inside
width
inside
thickness
back
inches
a
mm
b
mm
c
mm
d
mm
e
mm
kg
6
8
10
13
14
15
17
19
20
21
23
25
27
29
33
38
41
46
51
60
64
64
67
70
86
48
54
64
73
80
80
98
108
124
124
133
146
162
178
197
229
254
254
286
318
330
330
356
413
502
30
33
38
41
44
44
59
67
73
73
83
92
108
111
133
152
165
165
178
191
203
203
216
241
273
20
22
25
29
32
32
41
44
51
51
57
64
70
76
95
105
114
114
127
133
140
140
146
159
203
3.5
4
4.8
4.8
5.6
5.6
7.9
7.9
9.5
9.5
9.5
10.3
10.3
12.7
12.7
15.9
17.5
17.5
25.4
28.6
28.6
28.6
30.2
31.8
41.3
5.4
5.7
7.6
14.2
18
18.9
34
39.7
62.4
62.4
75.6
106
125
151
204
318
488
499
556
-
/4
5
/16
3
/8
7
/16
1
/2
9
/16
5
/8
11
/16
3
/4
13
/16
7
/8
15
/16
1
1
1
1
1
1
1
1
1
2
2
2
2
2
3
4
5
mild steel
generally to EN13411-1 formerly BS 464
diameter
rope
1
2
:
:
:
:
1
/8
/4
3
/8
1
/2
5
/8
3
/4
7
/8
1
1
/8
/4
1
/2
3
/4
1
weight
per
100 pcs
Thimbles
6
generally to US Fed. Spec. FF-T-276b type III
7
• Material
• Standard
8
• Finish
• Certification
9
10
diameter
rope
length
width
length
inside
width
inside
thickness
back
a
inches
b
inches
c
inches
d
inches
e
inches
f
inches
1
G-6142
11
12
13
1
1
1
1
1
1
1
2
2
3
14
15
16
56
: mild steel
: generally to US Federal Specification
FF-T-276b type III
/4
5
/16
3
/8
7
/16
1
/2
9
/16
5
/8
3
/4
7
/8
7
/8
1
/ 8 - 1 1/ 4
1
/ 4 - 1 3/ 8
3
/ 8 - 1 1/ 2
5
/8
3
/4
7
/8 - 2
1
/4
1
/2
2
2
2
3
3
3
4
5
5
6
7
8
9
11
12
15
17
18
20
3
/16
1
/2
7
/8
1
/4
5
/8
5
/8
1
/4
1
1
1
/2
/8
/16
1
/4
/16
1
/8
1
/8
1
/4
1
/4
3
1
1
2
2
2
2
3
3
4
4
5
6
7
8
8
10
11
12
14
1
/2
13
/16
1
/8
3
/8
3
/4
11
/16
1
/8
13
/16
1
/4
15
/16
7
/8
13
/16
1
/8
1
/8
1
/2
3
/8
7
/8
1
/4
1
1
2
2
2
2
3
3
4
4
5
6
6
8
9
12
14
14
16
5
/8
7
/8
1
/8
3
/8
3
/4
3
/4
1
/4
3
/4
1
/4
1
/2
1
/8
1
/4
1
/2
7
1
/8
/2
7
1
1
1
1
1
1
2
2
2
2
3
3
4
4
6
7
7
7
/8
1
/16
1
/8
1
/4
1
/2
1
/2
3
/4
1
/4
/2
7
/8
1
/2
1
/2
1
1
/2
7
/8
1
/16
5
/64
7
/64
1
/8
9
/64
9
/64
5
/32
7
/32
7
/32
1
/4
1
/4
1
/2
1
/2
1
/2
1
/2
1
/2
1
/2
3
/4
3
/4
weight
per
100 pcs
kg
3.4
6.3
11.3
16.2
23
23
33.8
66.2
83.3
135
185
375
540
731
810
1170
1935
-
Thimbles
Thimbles
towing type
•
•
•
•
G-6160
Material
Finish
Certification
Options
:
:
:
:
mild steel
thicker material
reinforced back
welded fillet plate
various links
keeper bands
circumference width
rope
groove
inches
5
6
7
8
9
10
12
13
14
15
16
a
mm
44
54
62
70
80
90
100
120
130
150
160
length
width
inside
length
inside
thickness
back
b
mm
200
230
270
290
360
400
430
480
490
520
550
c
mm
90
100
120
130
150
160
170
170
180
190
200
d
mm
140
160
190
200
235
245
260
280
300
310
320
e
mm
6
8
8
8
10
10
10
13
13
15
15
weight
per
piece
kg
2
3
4
5
9.5
11.5
13.5
22
24
29
37
1
2
3
4
5
Thimbles
6
pennant line type
• Material
• Finish
• Certification
diameter
wire
rope
G-6151
mm
16
18
20
22
24
30
36
40
44
50
56
64
76
82
90
120
7
: mild steel
produced with a welded fillet plate
width
groove
length
width
length
inside
a
mm
17
19
21
23
25
33
38
41
46
52
56
70
81
92
105
130
b
mm
102
115
127
140
153
205
230
255
280
305
360
435
485
560
610
660
c
mm
75
85
100
110
115
155
175
190
210
225
240
290
320
375
410
450
d
mm
75
80
90
95
120
160
185
195
215
240
250
310
360
405
450
480
width
inside
e
mm
50
53
60
65
70
100
115
120
130
140
150
180
220
240
250
280
8
weight
per
piece
9
10
kg
0.4
0.5
0.8
0.9
1
2.5
4
4.5
7
8.3
12.5
19.5
29
35
42
58
11
12
13
14
15
16
57
Thimbles
Thimbles
for rope
• Material
• Finish
• Certification
E-6180
1
: mild steel
width
groove
length
length
inside
width
inside
thickness
back
a
mm
8
10
12
14
16
18
20
22
25
30
35
38
b
mm
43
50
55
60
66
77
91
100
115
140
140
140
c
mm
27
30
36
41
43
47
58
67
71
91
91
91
d
mm
16
19
22
24
26
30
35
38
45
55
55
55
e
mm
1
1.5
1.75
2
2.5
3
3
3
3
3
3
4
weight
per
100 pcs
kg
1.1
1.7
3
3.5
8
13
16
24
25
43
45
45
2
3
4
5
Thimbles
6
tubular type
• Material
• Finish
• Certification
7
: mild steel
: painted
8
9
P-6190
10
diameter
wire
rope
mm
10
12
14
16
18
22
24
26
32
38
44
11
12
13
14
15
16
58
diameter
length
width
inside
thickness
height
a
mm
12
15
17
19
22
25
28
30
35
45
50
b
mm
90
105
115
120
140
180
180
195
215
260
280
c
mm
23
27
27
32
35
45
45
47
60
70
75
d
mm
4
5
5
5
5
6
7
7
7
7
7
e
mm
8
10
10
12
15
16
16
18
22
27
28
weight
per
piece
kg
0.25
0.42
0.5
0.6
0.75
1.4
1.75
2
2.4
3.3
4.06
Thimbles
Round thimbles
ordinary type
• Material
• Finish
• Certification
E-6143
G-6143
: mild steel
: up to and including 13 mm electro-galvanized
over 13 mm hot dipped galvanized
width
groove
width
outside
width
inside
a
mm
10
12
13
14
15
16
18
20
22
25
28
30
35
40
b
mm
30
33
39
41
45
50
56
60
65
80
98
105
120
135
c
mm
18
20
24
28
30
35
40
42
45
52
60
65
75
80
weight
per
100 pcs
kg
1.4
2.6
3.4
4
5
6.5
8
9
10.5
25
43
65
90
95
1
2
3
4
5
Round thimbles
6
container type
• Material
• Finish
• Certification
: mild steel
7
8
G-6144
width
groove
width
outside
width
inside
a
mm
14
14
14
16
16
16
19
19
19
b
mm
80
92
96
80
92
96
80
92
96
c
mm
45
55
60
45
55
60
45
55
60
weight
per
100 pcs
9
10
kg
35
41
44
35
41
44
35
41
44
11
12
13
14
15
16
59
Wire Rope Clips
Applications
Wire rope clips are used on wire rope eye-loop connections or complete loops, end-to-end connections where
socketing or splicing is not feasible or when a temporary joint is required.
Range
Van Beest offers a wide range of wire rope clips, specifically standardized models such as EN13411-5,
US Federal Specification wire rope clips and DIN wire rope clips.
Design
The Green Pin® wire rope clips are drop forged and have a bridge with grooves to fasten the wire rope properly
in the clip; the DIN wire rope clips have a malleable base, without grooves.
Finish
The finish is either electro-galvanized or hot dipped galvanized, unless otherwise specified.
Certification
3
Upon request, all wire rope clips can be supplied with a works certificate.
Wire rope clips should be inspected before use to ensure that:
•
•
•
•
the wire rope clip is free from nicks, gouges and cracks;
a wire rope clip with the correct dimension has been selected;
never repair or reshape a wire rope clip by welding, heating or bending as this may affect the performance.
The wire rope clip should be fitted to the wire rope as shown in the figures.
The bridge of the wire rope clip should always be placed on the load bearing part of the rope. The U-bolt of the
clip should be placed on the rope tail, also known as the dead end of the rope.
Turn back enough wire rope length so that the required minimum number of clips can be installed according to
the instructions below.
The first clip must be placed one bridge width from the turned back rope tail or dead end of the rope, according
to figure 1. Tighten the nuts to the specified torque.
60
Wire Rope Clips
The second clip must be placed immediately against the thimble but nevertheless in such a position that the
correct tightening of the clip does not damage the outer wires of the wire rope (figure 2). Tighten the nuts firmly
but not yet to the specified torque.
The following clips should be placed on the wire rope between the first and second clip in such a way that they are
separated by at least 1½ times the clip-width with a maximum of 3 times the clip-width, according to figure 3.
1
2
Apply light tension on the rope and tighten all nuts evenly, alternating until reaching the specified torque.
3
During assembly and before the rope is taken into service, the nuts must be tightened once again to the
prescribed torque. After the load is applied for the first time, the torque value must be checked again and corrected if necessary. Periodically re-tightening of the nuts must be done at 10.000 cycles (heavy usage), 20.000
cycles (moderate usage) or 50.000 cycles (light usage). If cycles are unknown, a fixed time period could be used,
e.g. every 3 months, 6 months, annually.
The torque values and the minimum number of clips to be applied, in relation to the rope size, are given in the
following tables.
diameter
wire
rope
inches
1
/8
3
/16
1
/4
5
/16
3
/8
7
/16
1
/2
9
/16
5
/8
3
/4
7
/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
2
2 1/4
2 1/2
2 3/4
3
diameter
wire
rope
mm
3-4
5
6-7
8
9-10
11-12
13
14-15
16
18-20
22
24-25
28-30
32-34
36
38-40
41-42
44-46
48-52
56-58
62-65
68-72
75-78
min. no
of clips
required
2
2
2
3
3
3
3
3
3
4
4
5
6
7
7
8
8
8
8
8
9
10
10
length of rope
to turn back
mm
85
95
120
133
165
178
292
305
305
460
480
660
860
1120
1120
1370
1470
1550
1800
1850
2130
2540
2690
torque
value
Nm
6.1
10.2
20.3
40.7
61
88
88
129
129
176
305
305
305
488
488
488
583
800
1017
1017
1017
1017
1627
4
5
6
torque
value
7
Ft.Lbs
4.5
7.5
15
30
45
65
65
95
95
130
225
225
225
360
360
360
430
590
750
750
750
750
1200
8
9
10
11
12
13
14
15
16
61
Wire Rope Clips
diameter
wire
rope
mm
5
6.5
8
10
12
13
14
16
19
22
26
30
34
40
min. no
of clips
required
3
3
4
4
4
4
4
4
5
5
5
6
6
6
torque
value
torque
value
Nm
2
3.5
6
9
20
33
33
49
68
107
147
212
296
363
Ft.Lbs
1.5
2.6
4.4
6.6
14.8
24.3
24.3
36
50
79
108
156
218
268
Table 2, Wire rope clips generally to EN 13411-5 Type A, required number and torque value
The efficiency of a wire rope termination made with wire rope clips will depend on the correct placement on
the ropes and on the care and skill of the fitting and tightening of the clips. With inadequately tightened nuts or
with an insufficient number of wire rope clips the rope end may slide through the clips at a very early stage in
loading.
1
A number of factors can adversely affect the tightness of the clips on ropes, such as:
- the nut may be tight on the thread, yet not tight against the bridge;
- contamination of the thread by dirt, oil or corrosion products, which may prevent the correct tightening of the
nut.
2
3
Forged wire rope clips provide greater bearing surface and more consistent strength than malleable cast iron
clips.
4
Suitable use of wire rope clips to EN13411-5 standards include suspending static loads and single use lifting
operations which have been assessed by a competent person taking into account appropriate safety factors.
5
Wire rope clips should not be used on the following applications:
• hoist ropes in mines;
• rope drives for cranes in steel works and rolling mills;
• permanent fastening of ropes in other rope drives;
• rope terminations for load suspension devices in the operation of lifting appliances except in the case of lifting
tackles where these are produced for a special application and are not re-used.
6
7
structure.
8
9
10
11
12
13
14
15
16
62
generally to EN 13411-5 Type B
• Material
: Bridge
: drop forged high tensile steel SAE 1035
or SAE 1045
U-bolt
: SAE 1015
: EN 13411-5 Type B
Formerly U.S. Federal Specification FF-C-450D
nuts for diameter bow 5 and 6 mm are electro-galvanized
• Standard
• Finish
• Certification
G-6240
diameter
wire
rope
diameter
length
bow
width
inside
length
thread
a
mm
b
mm
c
mm
d
mm
e
mm
12
15
19
22
26
30
30
33
33
38
45
48
51
59
60
66
70
78
86
98
105
112
121
11
13
13
19
19
25
25
32
32
37
41
46
51
54
59
60
67
70
78
81
87
91
98
24
29
37
43
49
58
58
63
64
72
80
88
91
105
108
112
121
134
150
162
168
174
194
inches mm
1
/8
3
/16
1
/4
5
/16
3
/8
7
/16
1
/2
9
/16
5
/8
3
/4
7
/8
1
1
1
1
1
1
1
2
2
2
2
3
1
/8
1
/4
3
/8
1
/2
5
/8
3
/4
1
/4
/2
3
/4
1
4
5
7
8
10
11
13
15
16
20
22
26
30
34
36
40
42
46
52
58
65
72
78
5
6
8
10
11
12
13
14
14
16
19
19
19
22
22
22
25
29
32
32
32
32
38
24
31
34
45
49
60
61
72
74
86
98
108
117
130
140
147
161
174
195
213
227
243
271
length thickness height
base
base
base
f
mm
21
24
30
33
42
46
48
52
54
57
62
67
73
79
79
85
92
97
113
116
119
127
135
g
mm
10
13
18
19
25
26
31
31
36
38
40
47
48
56
58
64
67
76
85
100
113
124
136
weight
per
100 pcs
mm
2
4
8
14
19
31
34
36
45
68
108
113
140
207
234
266
329
441
603
707
806
1000
1440
1
2
3
4
5
6
Wire rope clips
generally to EN 13411-5 Type A
• Material
• Standard
• Finish
• Certification
E-6260
diameter diameter
wire
rope
a
mm
mm
5
4
6.5
5
8
7
10
7
12
10
13
11
14
12
16
12
19
12
22
14
26
18
30
18
34
22
40
24
Wire Rope Clips
Green Pin® wire rope clips
7
: Bridge
: malleable steel
U-bolt
: mild steel
: EN 13411-5 Type A
Formerly DIN 1142
length
bow
width
inside
length
thread
b
mm
25
32
41
46
56
64
66
76
83
96
111
127
141
159
c
mm
12
14
18
20
24
29
28
34
37
41
46
54
60
68
d
mm
14
17
20
24
28
29
31
35
36
40
50
55
60
65
8
9
base
base
base
e
mm
25
30
39
40
50
55
59
64
68
74
84
95
105
117
f
mm
13
16
20
20
25
28
30
32
33
34
38
41
45
49
g
mm
13
14
18
21
24
29
28
35
40
44
51
59
67
77
weight
per
100 pcs
kg
2
4
8.2
9.2
21.5
27.5
39.5
43
49
68
117
140
213
268
10
11
12
13
14
15
16
63
Wire Rope Clips
Wire rope clips
• Material
• Standard
• Finish
• Certification
E-6220
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
64
diameter diameter
wire
rope
a
mm
mm
3
4
5
5
6
5
8
6
10
8
11
8
13
10
14
10
16
12
19
12
22
14
26
14
30
16
34
16
40
16
: Bridge
: casted
U-bolt
: mild steel
: DIN 741
length
bow
width
inside
length
thread
b
mm
20
24
28
34
42
44
55
57
63
75
85
95
110
120
140
c
mm
9
11
13
16
19
20
24
25
29
32
37
41
48
52
58
d
mm
12
13
15
19
22
22
30
30
33
38
44
45
50
55
60
base
base
base
e
mm
21
23
26
30
34
36
42
44
50
54
61
65
74
80
88
f
mm
10
11
12
14
18
19
23
23
26
29
33
35
37
42
45
g
mm
10
10
11
15
17
18
21
22
26
30
34
37
43
50
55
weight
per
100 pcs
kg
1.4
1.5
2.1
4.1
6.8
7.2
13
13.5
21
28
40
44
66
85
104
generally to NF 00026
• Material
• Standard
• Finish
• Certification
E-6280
b
g
d
diameter diameter
wire
rope
a
mm
mm
12
10
14
10
16
10
18
12
20
12
22
14
: Bridge
: dropforged high tensile steel
U-bolt
: mild steel
: NF 00026
length
bow
width
inside
length
thread
b
mm
46
56
60
70
72
84
c
mm
24
26
28
31
33
39
d
mm
25
30
32
38
40
45
base
base
base
e
mm
45
50
55
60
68
78
f
mm
26
28
30
32
38
40
g
mm
16
18
19
20
25
25
weight
per
100 pcs
kg
9.5
14
16
25
28
38
1
c
e
Wire Rope Clips
Wire rope clips
f
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
65
Sleeves
Applications
Sleeves are used for Flemish Eye wire rope slings.
They are available in two types and a large number of sizes.
Range
Van Beest offers a wide range of sleeves, in both aluminium and carbon steel.
Design
Aluminium wire rope sleeves are manufactured according to DIN 3093 A. For safety in fabrication, and application our sleeves are of seamless construction corresponding with the requirements of DIN 3093 A regarding
material composition and mechanical properties.
Prescon carbon steel sleeves are manufactured from carbon steel and feature the Swaging Verification System in
which the colour changes intensity after swaging. This system helps the sling manufacturer to determine whether
or not the sleeve has been pressed.
The sleeves are of seamless construction and fit industry standard dies.
Finish
Aluminium sleeves are self coloured.
The smaller dimensions of Prescon sleeves, up to and including 25 mm, are colour coded, larger dimensions
are self coloured.
4
Certification
Upon request, all sleeves can be supplied with a works certificate.
Aluminium sleeves, please refer to EN13411-3
Prescon sleeves are suitable for:
- 6 x 19 and 6 x 37 IWRC right regular lay EIPS steel wire rope
- 6 x 19 and 6 x 37 FC IPS right regular lay steel wire rope
A Flemish Eye is made the following way:
A carbon steel sleeve is placed on the steel wire rope after its required length is set. Then the Flemish Eye is
spliced in the rope. The sleeve is pushed over the splice and then swaged. Multiple progressive pressings are
required to prevent flash, which will develop into a permanent mark or possibly a crack in the sleeve.
A light oil lubricant should be applied to each die and cleaned after the swaging operation to stimulate effective
colour change.
Colour change is not an indication for proper swaging, only an indication that the sleeve has been pressed.
Proper swaging practices are the sling manufacturer’s responsibility.
Regular inspection of swaging machine, dies etc. must be conducted to ensure that the equipment continues
to meet required standards.
66
Sleeves
Aluminium sleeves
for wire rope
• Material
• Standard
• Finish
A-6550
diameter
wire
rope
mm
1
1.5
2
2.5
3
3.5
4
4.5
5
6
6.5
7
8
9
10
11
12
13
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
: aluminium
: EN 13411-3 formerly DIN 3093 A
: self coloured
diameter
a
mm
1.2
1.7
2.2
2.7
3.3
3.8
4.4
4.9
5.5
6.6
7.2
7.8
8.8
9.9
10.9
12.1
13.2
14.2
15.3
17.5
19.6
21.7
24.3
26.4
28.5
31
33.1
35.2
37.8
39.8
41.9
44
46.2
48.4
50.6
52.8
55
57.2
59.4
61.6
63.8
66
width
b
mm
2.4
3.4
4.4
5.4
6.6
7.6
8.8
9.8
11
13.2
14.4
15.6
17.6
19.8
21.8
24.2
26.4
28.4
30.6
35
39.2
43.4
48.6
52.8
57
62
66.2
70.4
75.6
79.6
83.8
88
92.4
96.8
101.2
105.6
110
114.4
118.8
123.2
127.6
132
thickness
c
mm
0.65
0.75
0.85
1.05
1.25
1.5
1.7
1.9
2.1
2.5
2.7
2.9
3.3
3.7
4.1
4.5
4.9
5.4
5.8
6.7
7.6
8.4
9.2
10
10.9
11.7
12.5
13.4
14.2
15
15.8
16.6
17.5
18.3
19.2
20
20.8
21.6
22.5
23.3
24.2
25
length
d
mm
5
6
7
9
11
13
14
16
18
21
23
25
28
32
35
39
42
46
49
56
63
70
77
84
91
98
105
112
119
126
133
140
147
154
161
168
175
182
189
196
203
210
weight
per
1000 pcs
kg
0.1
0.21
0.24
0.5
0.84
1.32
1.81
2.61
3.57
5.86
7.55
9.53
13.7
19.8
26.4
35.8
45.8
59.7
73.5
111
159
217
292
376
481
603
739
897
1080
1275
1490
1734
2020
2314
2557
3010
3400
3813
4120
4772
5200
5880
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
67
Sleeves
Prescon sleeves
for wire rope
• Material
• Finish
S-6500
diameter
wire
rope
mm
6
8
10
11
13
14
16
19
22
25
28
32
34-35
37-38
44-45
50-52
56-57
62-64
68-70
75-76
87-89
93-95
100-102
112-114
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
68
: special carbon steel
: up to and including size 25 mm colour coded
sizes above 25 mm self coloured
length
a
mm
25.4
38.1
38.1
51
51
70
70
81
90
102
122
132
148
159
184
216
243
267
292
305
356
381
406
457
diameter
outside
b
mm
16.7
23
23
31
31
37
37
43.6
51.6
58
64
71
76
83
102
111
128
140
146
152
178
191
206
232
diameter
inside
c
mm
8.3
11.1
11.9
14.3
15.9
17.5
19.1
23.4
26.2
29.4
32.5
36.5
39.7
42.9
49.2
57
64
70
76
83
98
103
111
124
diameter
inside
d
mm
11.9
15.5
16.7
21.4
23
26.2
27.8
32.5
38.9
43.7
49.2
55
60
66.7
79
92
102
114
121
127
148
160
173
194
length
e
mm
7.1
11.1
11.1
15.1
15.1
17.9
17.9
21.8
25.4
28.6
31.8
35.7
39.7
42.9
50
57
64
71
79
86
100
108
114
129
diameter
outside
pressed
mm
12.7
18.5
18.5
24.9
24.9
30.5
30.5
35.8
41.4
47.8
53
58
62
67
77
89
103
113
118
124
145
156
180
187
weight
per
100 pcs
kg
2.15
4.03
5.44
11.3
13.2
19.5
25.9
39.9
62
88
118
154
195
227
367
510
862
1043
1270
1334
2105
2495
3130
4536
Sleeves
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
69
Sockets
Applications
Sockets are used for fastening steel wire rope to a fixed point to which the socket is to be connected. This can
be as an anchoring system for tubes or pipes, anchor wires of dredging material, anchor cables of oil platforms,
towing cables or for fastening cables in construction purposes such as bridges, roof construction etc.
Sockets are the strongest steel wire rope end fitting and if they are assembled in the proper way they can meet
at least the breaking strength of the steel wire rope. In the past melted zinc was poured into the sockets to attach
the steel wire rope; nowadays suitable resins have been developed for this purpose.
Range
Van Beest offers a wide range of sockets, i.e.:
•
•
•
•
•
•
Closed spelter sockets;
Open spelter sockets;
Open wedge sockets;
Open swage sockets;
Closed swage sockets;
Gold Nose sockets.
Design
Green Pin® open and closed spelter sockets and open wedge sockets are made from cast high tensile steel.
Upon request forged sockets can be supplied.
Gold Nose sockets are galvanized drop forged “Special Tailboard Anchor Pendant Sockets” ; tested and
approved by major offshore drilling contractors on semi-submersible rigs. With the Gold Nose sockets you save
thousands of dollars in replacement costs and by eliminating costly downtime.
Swage sockets are drop forged from special bar quality carbon steel C-1035 and spheroidized annealed to be
suitable for cold swaging.
5
Finish
Green Pin® open and closed spelter sockets and open wedge sockets are painted green. Galvanized sockets
can be supplied on request.
Certification
Upon request, all sockets can be supplied with a works certificate and a proof load test certificate. All sockets,
with the exception of the swage sockets, are marked with the batch number which refers to the supplied certificate.
1) Open spelter sockets – closed spelter sockets
Figure 1
- brooming is done after the wire rope has been placed into the socket
- when using resins always exactly follow the instructions given by the manufacturer of the resins
- socketing is only to be carried out by specialists from a certified sling shop
70
The wedge and body act as a vice which grips the wire rope and locks it in place. Green Pin® wedge sockets
may be used within the range of wire rope diameters as shown in the table further on in the catalogue.
When using open wedge sockets the following precautions should be taken:
•
•
•
•
•
•
before use always inspect the socket, the wedge and the pin
use only with standard 6-8 strand wire rope
always be sure that socket and wedge have the correct size for the wire rope diameter
the loaded part of the steel wire rope should be mounted in the centre line of the pin
when installing the wire rope, always pre-load the wedge with the wire rope in place
never weld the tail on standard wire rope; the tail should have a length of at least 6 times the wire rope diameter with a minimum of 150 mm, secure the dead end of the rope with a wire rope clip as shown in figure 3
• before applying the first load always use a hammer to seat the wedge and rope as deep as possible into the
socket
• check the assembly regularly to re-tighten or re-position if necessary
• never side-load the wedge socket as it has not been designed for that purpose
• load may slip if the connection is not properly installed
• the efficiency of a wire rope - wedge socket connection is 80% of the minimum breaking load of the wire but
limited to the minimum breaking load of the socket
• only use the original wedge supplied by the manufacturer of the socket and be sure it is suitable for the
diameter of the rope used
• never use a wedge from any other supplier than the original socket supplier as the dimensions will not match
Sockets
2) Open wedge sockets
1
2
3
4
5
6
7
8
9
10
11
Right
12
13
14
15
16
71
Sockets
3) Swage sockets
Figure 4
-
1
swage sockets are recommended for use on 6 x 19 or 6 x 37 IWRC regular lay ropes
mark the rope to indicate the proper length of rope to be inserted into the socket (figure 5)
insert the rope into the socket and swage the socket with the specified dies (figure 5)
all slings terminated with swage sockets must be proof loaded
always swage under supervision of a specialist from a certified sling shop
with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure.
Inspection should take place at least every six months and even more frequently when the sockets are used in
2
3
4
5
Step 1. Mark rope to indicate proper amount to insert into socket.
6
7
8
Step 2. Insert rope into socket.
9
10
11
Step 3. Swage the socket.
12
Figure 5
13
14
15
16
72
Sockets
Green Pin® sockets
closed spelter socket
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
high tensile steel GS21Mn5
MBL equals 5 x WLL
painted green or hot dipped galvanized
a works certificate and a proof load test certificate can be supplied upon request
P-6411
G-6411
number working diameter length
load
wire
limit
rope
a
tons
mm
mm
298
4
11 - 13
140
299
5
14 - 16
162
200
8
18 - 19
194
201
10
20 - 22
224
204
12.6
23 - 26
253
207
16
27 - 30
282
212
20
31 - 36
312
215
25
37 - 39
358
217
32
40 - 42
390
219
40
43 - 48
443
222
50
49 - 54
502
224
64
55 - 60
548
226
80
61 - 68
597
227
90
69 - 75
644
228
100
76 - 80
686
229
120
81 - 86
743
230
140
87 - 93
788
231
160
94 - 102
845
233
200
108 - 115 1000
240
240
120 - 130 1110
width
b
mm
51
67
76
92
104
114
127
136
146
171
193
216
241
273
292
311
330
362
405
515
width
inside
bow
c
mm
30
36
42
47
57
63
70
79
83
93
100
112
140
159
171
184
197
216
235
260
length thickness thickness opening
inside
bow
bow
bow
d
e
f
g
mm
mm
mm
mm
59
17.5
22.5
14
65
21
26
17.5
78
27
32
21
90
33
38
24
103
36
44
28
116
39
51
32
130
43
57
38
155
51
63
41
171
54
70
44
198
55
76
51
224
62
82
57
247
73
92
63
270
79
102
73
286
79
124
79
298
83
133
86
311
102
146
92
330
102
159
99
356
108
178
108
425
125
190
125
475
135
210
138
weight
per pce
kg
0.7
1.3
2.1
3.6
5.3
7
9.7
13
17
26
37.5
50
65
94
110
145
168
210
330
550
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
73
Sockets
Green Pin® sockets
open spelter socket
•
•
•
•
P-6412
G-6412
Material
Safety factor
Finish
Certification
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
74
MBL equals 5 x WLL
a works certificate and a proof load test certificate can be supplied
upon request
number working diameter
load
wire
limit
rope
198
199
100
104
108
111
115
118
120
125
128
130
132
135
138
140
142
144
146
150
1
:
:
:
:
tons
4
5
8
10
12.6
16
20
25
32
40
50
64
80
90
100
120
140
160
200
240
mm
11 - 13
14 - 16
18 - 19
20 - 22
23 - 26
27 - 30
31 - 36
37 - 39
40 - 42
43 - 48
49 - 54
55 - 60
61 - 68
69 - 75
76 - 80
81 - 86
87 - 93
94 - 102
108 - 115
120 - 130
length
width
inside
diameter
pin
length
inside
opening
a
mm
142
171
205
235
275
306
338
394
418
468
552
598
654
696
737
788
852
914
1145
1280
b
mm
25
32
38
44
51
57
63
76
76
89
101
113
127
133
146
159
171
191
205
225
c
mm
25
30
35
41
51
57
63
70
76
89
95
108
121
127
133
140
152
178
195
250
d
mm
38
48
58
68
75
85
95
127
127
133
180
196
212
215
219
228
242
254
382
375
e
mm
14
17.5
21
24
28
32
38
41
44
51
57
63
73
79
86
92
99
108
125
138
weight
per pce
kg
1
1.8
3.2
4.6
8
11
16
23
27
41
58
85
118
155
173
230
265
370
525
900
Sockets
Green Pin® sockets
open wedge socket
•
•
•
•
P-6413
G-6413
Material
Safety factor
Finish
Certification
:
:
:
:
number
working
load
limit
diameter
wire
rope
tons
1.25
2
3.2
5
6.3
8
12.6
16
20
20
25
32
40
50
64
80
90
100
mm
7-8
9 - 10
11 - 13
14 - 16
18 - 19
20 - 22
24 - 26
27 - 29
30 - 32
34 - 36
37 - 39
40 - 42
43 - 48
49 - 52
54 - 58
60 - 68
72 - 76
81 - 86
0.25
0.5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MBL equals 5 x WLL
a works certificate and a proof load test certificate can be supplied
upon request
length
length
to center
pin
b
mm
110
142
146
176
212
240
274
310
350
400
450
500
550
640
660
835
1000
1100
a
mm
129
165
174
211
252
288
329
375
423
474
527
580
643
737
775
960
1135
1250
width
inside
c
mm
18
21
25
31
38
44
51
57
63
69
76
76
89
101
114
127
146
159
diameter thickness diameter
pin
side
eye
plates
d
e
f
mm
mm
mm
16
9
36
20
11
46
25
12
57
30
15
70
35
16
80
41
19
95
51
22
110
57
25
130
64
28
146
64
28
148
70
30
153
76
33
160
89
39
186
95
46
194
108
54
230
121
60
250
133
76
270
140
79
300
weight
per pce
kg
0.8
1.7
2.1
4
7
10
15
21
31
37
51
64
96
130
180
275
440
510
1
2
3
4
5
6
Gold Nose™ sockets
7
closed spelter socket
• Material
• Finish
• Certification
8
: drop forged alloy steel SCM 435
: galvanized
: a works certificate and a proof load test certificate can be supplied
upon request
9
G-6416
10
diameter
wire
rope
inches
1 1/4 - 1 3/8
1 1/2 - 1 5/8
1 3/4 - 1 7/8
2 - 2 1/8
2 1/4 - 2 3/8
2 1/2 - 2 5/8
2 3/4 - 2 7/8
3 - 3 1/8
3 1/4 - 3 3/8
3 1/2 - 3 5/8
3 3/4 - 3 7/8
4 - 4 1/4
length
width
thickness
bow
width
length
eye
width
eye
a
mm
246
305
356
391
438
457
540
584
626
670
698
803
b
mm
122
152
178
202
221
264
273
295
319
340
356
412
c
mm
38
40
47
53
61
68
74
76
82
92
98
112
d
mm
48
57
66
76
80
96
105
115
121
127
133
152
e
mm
83
104
121
133
146
165
178
194
216
219
235
270
f
mm
76
92
112
121
133
149
163
174
194
202
214
242
thickness weight
per pce
g
mm
97
123
140
158
184
217
222
243
260
270
290
318
11
12
kg
18
22
28
32
44
56
68
100
120
145
190
250
13
14
15
16
75
Sockets
Green Pin® swage sockets
open type
• Material
• Finish
: drop forged steel C-1035
: self coloured
S-6414
diameter diameter max. diameter diameter length
rope
before diameter inside
pin
swage
after
swage
a
a
b
c
d
mm
mm
mm
mm
mm
mm
6
13
11.7
7
17
38
8
20
18.0
9
21
44
10
20
18.0
12
21
44
11
25
23.1
12
25
51
13
25
23.1
14
25
51
14
32
29.5
15
30
57
16
32
29.5
17
30
57
19
39
36.1
20
35
70
22
43
39.4
24
41
83
25
50
45.7
27
51
95
29
57
52.1
30
57
108
32
64
58.4
34
64
121
35
71
65.0
37
64
133
38
78
71.4
40
70
146
44
86
77.7
47
89
171
51
100
90.4
54
95
203
57
113
60
108
171
60
125
64
108
171
63
125
67
108
171
70
138
74
127
219
76
151
80
133
219
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
76
length
length
e
mm
121
159
159
198
198
243
243
297
346
397
444
494
540
591
689
798
835
879
879
978
1045
f
mm
54
81
81
108
108
135
135
162
189
216
243
270
297
324
378
432
486
498
498
537
603
length thickness width
inside
g
mm
102
135
135
169
169
206
206
254
295
340
381
419
460
502
584
679
705
749
749
838
905
h
mm
8
10
10
13
13
16
16
19
23
26
30
30
33
37
43
46
65
65
65
76
76
i
mm
17
21
21
25
25
32
32
38
44
51
57
63
63
76
89
102
114
114
114
146
146
width
eye
weight
per pce
j
mm
35
41
41
51
51
63
63
76
86
102
114
127
133
146
178
203
222
222
222
241
241
kg
0.25
0.50
0.49
1.04
1.02
2.09
2.04
3.54
5.31
8.07
13.5
16.3
21.3
29.5
42.2
65.8
93.4
106
103
158
181
Sockets
Green Pin® swage sockets
closed type
• Material
• Finish
: drop forged steel C-1035
: self coloured
S-6415
diameter diameter max. diameter diameter diameter thickness length
rope
before diameter inside
eye
swage
after
swage
a
a
b
c
d
e
f
mm
mm
mm
mm
mm
mm
mm
mm
6
13
11.7
7
37
19
13
54
8
20
18.0
9
43
22
17
81
10
20
18.0
12
43
22
17
81
11
25
23.1
12
51
27
22
108
13
25
23.1
14
51
27
22
108
14
32
29.5
15
63
32
29
135
16
32
29.5
17
63
32
29
135
19
39
36.1
20
76
37
33
162
22
43
39.4
24
89
43
38
189
25
50
45.7
27
102
52
44
216
29
57
51.1
30
114
59
51
243
32
64
58.4
34
127
65
57
270
35
71
65.0
37
133
65
57
297
38
78
71.4
40
140
71
63
324
44
86
77.7
47
171
91
76
378
51
100
90.4
54
197
97
83
432
57
113
60
219
110
102
486
60
125
64
219
110
102
498
63
125
67
219
110
102
498
70
138
74
235
129
137
537
76
151
80
235
135
137
603
length
length
g
mm
111
140
140
176
176
222
222
264
308
349
387
438
479
518
610
698
756
791
791
892
959
h
mm
89
114
114
146
146
184
184
219
257
292
324
365
400
432
508
584
632
664
667
752
816
weight
per pce
kg
0.15
0.36
0.35
0.66
0.63
1.26
1.25
2.27
3.40
5.08
7.17
10.4
14.1
17.7
23.6
40.8
55.3
67.6
64.4
99.3
114
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
77
Turnbuckles
Applications
Turnbuckles are normally used for rigging or tensioning of wires, ropes, rods etc. Turnbuckles are designed for straight or
in-line rigging, tensioning or lashing only.
Range
Van Beest offers a wide range of turnbuckles, i.e.:
Load rated Green Pin® turnbuckles;
Open body rigging screws generally to DIN1480;
Rigging screws with welding ends;
Closed body rigging screws;
Special turnbuckles for lashing (hamburgers).
Design
Green Pin® turnbuckles are manufactured to ASTM F1145-92, formerly U.S. Fed. Spec.FF-T-791, and have a
safety factor of 5 to 1. The Green Pin® turnbuckles are drop forged.
Turnbuckles can be equipped with the following endfittings: eye/eye, hook/hook, hook/eye, jaw/jaw and jaw/
eye. All parts are interchangeable, locking nuts are supplied with all sizes.
The forged jaw ends are fitted with bolts and nuts on sizes 3/8” up to and including 5/8”, sizes ¾” up to and
including 2 ¾” are equipped with pins and cotters.
Rigging screws generally to DIN 1480 are available with welding ends and in hook/eye, eye/eye, hook/hook
and jaw/jaw combinations.
Closed body rigging screws are available in jaw/jaw, jaw/eye and eye/eye combinations.
Finish
Load rated Green Pin® turnbuckles and closed body rigging screws are hot dipped galvanized. Rigging screws according
to DIN 1480 are electro-galvanized whereas lashing turnbuckles are self coloured or can be painted upon request.
6
Certification
Upon request, Green Pin® turnbuckles can be supplied with a works certificate and a proof load test certificate.
Turnbuckles must be used for straight or in-line pulling only.
Special attention should be paid to prevent overloading.
While tensioning, the forces on the turnbuckle must not be such that any deformation occurs. In case of deformation, the tension should
be decreased immediately and deformed parts should be replaced. Should extreme circumstances or shock loading be applicable this
must be taken into account when selecting the correct products to be used for the application.
Closed body rigging screws and commercial open body rigging screws are used for tensioning wires and ropes for minor loads (i.e.
rope railings). The WLL values are only indicative, and these products are not suitable for bearing constructions.
For the rigging of wires, ropes, rods etc., Green Pin® turnbuckles and turnbuckles according to DIN 1480 with forged eyes or with
welding ends are to be used.
The Working Load Limit (WLL) should be applied in a straight pull only and overloading is not permitted. Nor should side loads be
applied, as the products have not been designed for this purpose.
It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards
given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a
consequence of deformation and alteration of the steel structure.
78
Turnbuckles should be inspected before use to insure that:
-
the
the
the
the
threads of the body and the endfittings are of the same type;
threads of the body and the endfittings are undamaged;
body and endfittings are not distorted or unduly worn;
body and endfittings are free from nicks, gouges and cracks.
Furthermore, it must be ensured that the endfittings are correctly screwed into the body. Always use the locking
nuts supplied to prevent the turnbuckles from unscrewing.
Never replace an endfitting, other than the one designed for the purpose, as it may not be suitable for the loads
imposed.
Turnbuckles
Safe use of turnbuckles
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
79
Turnbuckles
Green Pin® turnbuckles Jaw - Jaw
generally to ASTM F1145-92
• Material
• Safety factor
• Standard
• Finish
• Certification
working diameter
load
thread
limit
a
tons
inches
G-6313
e
b
1
c, d
2
3
4
g
5
i
6
7
8
9
10
11
12
13
14
15
16
80
f
h
0.54
1
1
1
1.59
1.59
1.59
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.54
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.78
27.22
34.02
3
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
1
/4
/4
1
/4
1
/2
1
/2
1
/2
3
/4
3
/4
1
1
3
/2
/4
: drop forged high tensile steel SAE 1035 or 1045
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: a works certificate or proof load test certificate can be supplied upon request
take
up
inches
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
length
length
length opening
closed
closed
open
jaw
position position position
b
c
d
e
mm
mm
mm
mm
274
306
380
456
346
421
497
369
443
519
671
551
705
448
598
751
902
657
809
962
689
841
994
918
1070
1136
1276
1334
302
338
414
490
394
470
546
432
508
584
737
618
772
524
676
829
980
753
905
1058
804
956
1109
1049
1201
1295
1476
1560
416
452
585
719
508
641
775
546
679
813
1080
854
1121
638
905
1172
1437
989
1255
1521
1052
1318
1585
1403
1670
1772
1943
2019
13
16
16
16
18
18
18
23
23
23
23
27
27
30
30
30
30
44
44
44
52
52
52
59
59
64
75
89
length
inside
diameter thickness diameter weight
pin
jaw eye jaw eye per pce
f
mm
g
mm
22
26
26
26
33
33
33
38
38
38
38
44
44
52
52
52
52
73
73
73
70
70
70
85
85
93
114
110
8
9.5
9.5
9.5
13
13
13
15.5
15.5
15.5
15.5
19
19
22
22
22
22
29
29
29
35
35
35
41
41
51
57
70
h
mm
i
mm
kg
8
10
10
10
13
13
13
16
16
16
16
18
18
20
20
20
20
25
25
25
27
27
27
33
33
39
38
42
21
25
25
25
33
33
33
41
41
41
41
48
48
54
54
54
54
67
67
67
80
80
80
90
90
108
143
156
0.57
0.96
1.18
1.50
1.84
2.12
2.56
2.68
3.03
3.29
3.65
4.90
5.95
5.21
6.96
8.95
7.85
11.9
14
13
16.9
18.7
18.4
25
28.7
45.4
73
98
Turnbuckles
Green Pin® turnbuckles Eye - Eye
• Material
• Safety factor
• Standard
• Finish
• Certification
G-6311
f
e
g
d
h
working diameter take
load
thread
up
limit
a
tons
inches inches
3
/8
6
0.54
1
/2
6
1
1
/2
9
1
1
/2
12
1
5
/8
6
1.59
5
/8
9
1.59
5
/8
12
1.59
3
/4
6
2.36
3
/4
9
2.36
3
/4
12
2.36
3
/4
18
2.36
7
/8
12
3.27
7
/8
18
3.27
4.54
1
6
4.54
1
12
4.54
1
18
4.54
1
24
12
6.91
1 1/4
18
6.91
1 1/4
24
6.91
1 1/4
12
9.71
1 1/2
18
9.71
1 1/2
24
9.71
1 1/2
18
12.71
1 3/4
24
12.71
1 3/4
16.78
2
24
24
27.22
2 1/2
24
34.02
2 3/4
length
length
closed
open
position position
b
c
mm
mm
302
416
338
452
414
585
490
719
394
508
470
641
546
775
432
546
508
679
584
813
737
1080
625
854
778
1121
524
638
676
905
829
1172
980
1437
760
989
912
1255
1064
1521
823
1052
975
1318
1128
1585
1060
1403
1213
1670
1315
1772
1486
1943
1562
2019
length diameter
d
mm
180
190
270
345
205
280
355
210
285
365
520
375
530
230
385
540
690
390
540
690
400
560
710
575
725
750
800
800
e
mm
9
12
12
12
14
14
14
17
17
17
17
20
20
22
22
22
22
29
29
29
32
32
32
38
38
45
51
57
width
inside
length
inside
f
mm
13
18
18
18
21
21
21
25
25
25
25
31
31
36
36
36
36
45
45
45
54
54
54
60
60
69
79
83
g
mm
28
36
36
36
43
43
43
53
53
53
53
59
59
74
74
74
74
88
88
88
105
105
105
119
119
146
165
178
length
weight
closed per pce
position
h
mm
kg
65
0.47
80
0.84
80
1.05
80
1.26
98
1.35
98
1.60
98
1.92
113
2.03
113
2.49
113
2.65
113
3.06
118
3.98
118
5.12
155
4.35
155
5.92
155
7.17
155
7.52
197
9.8
197
11.31
197
12.1
215
14.2
215
16.5
215
17.1
254
23.1
254
26.3
308
40.7
344
64
381
88
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
81
Turnbuckles
Green Pin® turnbuckles Hook - Hook
• Material
• Safety factor
• Standard
• Finish
• Certification
working
load
limit
G-6312
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
82
tons
0.45
0.68
0.68
0.68
1.02
1.02
1.02
1.36
1.36
1.36
1.36
1.81
1.81
2.27
2.27
2.27
2.27
2.95
2.95
2.95
3.4
3.4
3.4
diameter
thread
take
up
a
inches
3
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
inches
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
length
closed
position
b
mm
302
338
414
490
394
470
546
432
508
584
737
625
778
524
676
829
980
760
912
1064
823
975
1128
length thickness thickness opening
open
hook
hook
hook
position
c
d
e
f
mm
mm
mm
mm
416
10
15
14
452
13
19
17
585
13
19
17
719
13
19
17
508
16
23
22
641
16
23
22
775
16
23
22
546
20
27
25
679
20
27
25
813
20
27
25
1080
20
27
25
854
23
30
29
1121
23
30
29
638
25
35
32
905
25
35
32
1172
25
35
32
1437
25
35
32
989
28
37
39
1255
28
37
39
1521
28
37
39
1052
33
44
47
1318
33
44
47
1585
33
44
47
length
closed
position
g
mm
58
72
72
72
90
90
90
98
98
98
98
126
126
144
144
144
144
175
175
175
212
212
212
weight
per pce
kg
0.36
0.62
0.85
1.04
0.98
1.18
1.71
1.53
1.88
2.3
2.85
3.33
4.24
3.87
5.09
6
7.52
8.12
10.4
12.1
12.7
15.1
17.1
Turnbuckles
Green Pin® turnbuckles Eye - Jaw
• Material
• Safety factor
• Standard
• Finish
• Certification
working diameter
load
thread
take
length
length
opening
up
closed
open
jaw
limit
G-6315
position position
a
tons
0.54
1
1
1
1.59
1.59
1.59
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.54
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.78
27.22
34.02
inches
3
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
1
/4
/4
1
/4
1
/2
1
/2
1
/2
3
/4
3
/4
1
1
3
/2
/4
inches
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
inside diameter thickness diameter diameter inside
inside
length
weight
length
pin
eye
eye
width
length
closed
per pce
position
eye
jaw
jaw
jaw
jaw
eye
eye
b
c
d
e
f
g
h
i
j
k
l
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
416
452
585
719
508
641
775
546
679
813
1080
854
1121
638
905
1172
1437
989
1255
1521
1052
1318
1585
1403
1670
1772
1943
2019
13
16
16
16
18
18
18
23
23
23
23
27
27
30
30
30
30
44
44
44
52
52
52
59
59
64
75
89
8
9.5
9.5
9.5
13
13
13
15.5
15.5
15.5
15.5
19
19
22
22
22
22
29
29
29
35
35
35
41
41
51
57
70
8
10
10
10
13
13
13
16
16
16
16
18
18
20
20
20
20
25
25
25
27
27
27
33
33
39
39
42
21
25
25
25
33
33
33
41
41
41
41
48
48
54
54
54
54
67
67
67
80
80
80
90
90
108
143
156
9
12
12
12
14
14
14
17
17
17
17
20
20
22
22
22
22
29
29
29
32
32
32
38
38
45
51
57
13
18
18
18
21
21
21
25
25
25
25
31
31
36
36
36
36
45
45
45
54
54
54
60
60
69
79
83
28
36
36
36
43
43
43
53
53
53
53
59
59
74
74
74
74
88
88
88
105
105
105
119
119
146
165
178
65
80
80
80
98
98
98
113
113
113
113
118
118
155
155
155
155
197
197
197
215
215
215
254
254
308
344
381
0.51
0.89
1.10
1.31
1.58
1.84
2.22
2.34
2.72
2.95
3.30
4.35
5.46
4.66
6.35
7.98
7.39
10.92
11
12.9
13.1
14.7
17.8
22.3
27.5
42.9
68
91
302
338
414
490
394
470
546
432
508
584
737
625
778
524
676
829
980
760
912
1064
823
975
1128
1060
1213
1315
1486
1562
22
26
26
26
33
33
33
38
38
38
38
44
44
52
52
52
52
73
73
73
70
70
70
85
85
93
114
110
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
83
Turnbuckles
Green Pin® turnbuckles Eye - Hook
• Material
• Safety factor
• Standard
• Finish
• Certification
working diameter
load
thread
take
length
length thickness thickness opening diameter
inside
inside
length
weight
up
closed
open
width
length
closed
per pce
position
limit
G-6314
0.45
0.68
0.68
0.68
1.02
1.02
1.02
1.36
1.36
1.36
1.36
1.81
1.81
2.27
2.27
2.27
2.27
2.95
2.95
2.95
3.4
3.4
3.4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
84
hook
hook
eye
position position
a
tons
hook
inches
3
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
1
1
1
1
1
1
1
1
1
1
1
/4
/4
1
/4
1
/2
1
/2
1
/2
1
inches
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
eye
eye
b
c
d
e
f
g
h
i
j
mm
mm
mm
mm
mm
mm
mm
mm
mm
302
338
414
490
394
470
546
432
508
584
737
625
778
524
676
829
980
760
912
1064
823
975
1128
416
452
585
719
508
641
775
546
679
813
1080
854
1121
638
905
1172
1437
989
1255
1521
1052
1318
1585
10
13
13
13
16
16
16
20
20
20
20
23
23
25
25
25
25
28
28
28
33
33
33
15
19
19
19
23
23
23
27
27
27
27
30
30
35
35
35
35
37
37
37
44
44
44
14
17
17
17
22
22
22
25
25
25
25
29
29
32
32
32
32
39
39
39
47
47
47
9
12
12
12
14
14
14
17
17
17
17
20
20
22
22
22
22
29
29
29
32
32
32
13
18
18
18
21
21
21
25
25
25
25
31
31
36
36
36
36
45
45
45
54
54
54
28
36
36
36
43
43
43
53
53
53
53
59
59
74
74
74
74
88
88
88
105
105
105
65
80
80
80
98
98
98
113
113
113
113
118
118
155
155
155
155
197
197
197
215
215
215
kg
0.47
0.82
1.06
1.28
1.31
1.56
1.71
2.04
4.49
2.3
2.85
3.33
4.24
3.87
5.09
6
7.52
8.12
10.4
12.1
12.7
15.1
17.1
Turnbuckles
Rigging screws Eye - Eye
according to DIN 1480
• Material
• Standard
• Finish
E-6351
: drop forged mild steel
: DIN 1480
diameter length
length
thread
closed
open
position position
a
b
c
mm
mm
mm
6
160
246
8
168
248
10
210
300
12
222
305
14
244
334
16
300
416
20
334
466
22
372
527
24
410
587
30
440
605
33
490
690
36
554
740
length
length
length
body endfitting thread
d
mm
110
110
125
125
140
170
200
220
255
255
295
295
e
mm
80
84
105
110
123
143
165
185
208
220
245
277
f
mm
55
57
68
70
75
88
105
118
135
135
148
158
diameter diameter weight
eye
eye
per pce
outside inside
g
h
mm
mm
kg
20
9
0.11
22
10
0.2
31
14
0.28
35
16
0.43
40
18
0.61
47
22
1
52
24
1.6
60
27
2.2
65
27
2.8
71
31
4.1
88
36
6
94
38
8.5
1
2
3
4
Rigging screws Hook - Hook
5
• Material
• Standard
• Finish
6
: DIN 1480
7
8
E-6352
diameter length
length
thread
closed
open
position position
a
b
c
mm
mm
mm
6
184
270
8
200
280
10
234
323
12
260
343
14
278
368
16
322
438
20
382
514
22
456
601
24
496
673
30
550
715
33
600
799
36
640
825
length
length
length
body endfitting thread
d
mm
110
110
125
125
140
170
200
220
255
255
295
295
e
mm
92
100
117
130
139
161
191
228
248
275
300
320
f
mm
55
57
68
70
75
88
105
118
135
135
148
158
opening thickness weight
hook
hook
per pce
g
mm
8
10.5
13
16
18
20
21
24
26
34
38
46
h
mm
15
15
11
13
15
17
21
28
33
35
40
45
kg
0.11
0.2
0.28
0.43
0.61
1
1.6
2.2
2.8
4.1
6
8.3
9
10
11
12
13
14
15
16
85
Turnbuckles
Rigging screws Eye - Hook
• Material
• Standard
• Finish
E-6354
: DIN 1480
diameter length
length
thread closed
open
position position
a
b
c
mm
mm
mm
6
8
10
12
14
16
20
22
24
30
33
36
1
2
172
184
222
241
261
311
358
414
453
495
545
597
258
264
311
324
351
427
490
559
630
660
744
782
length
length
length length
body endfitting endfitting thread
d
mm
e
mm
110
110
125
125
140
170
200
220
255
255
295
295
77
85
106
117
124
144
170
200
215
240
260
275
f
mm
80
84
105
111
122
150
167
186
205
220
245
277
g
mm
opening thickness diameter diameter weight
hook
hook
eye
eye
per pce
outside inside
h
i
j
k
mm
mm
mm
mm
kg
55
57
68
70
75
88
105
118
135
135
148
158
8
10.5
13
16
18
20
21
24
26
34
38
46
15
15
11
13
15
17
21
28
33
35
40
45
20
22
31
35
40
47
52
60
65
71
88
94
9
10
14
16
18
22
24
27
27
31
36
38
0.11
0.2
0.28
0.43
0.61
1
1.6
2.2
2.8
4.1
6
8.4
pin
jaw eye jaw eye
weight
per pce
3
4
5
Rigging screws Jaw - Jaw
6
•
•
•
•
7
Material
Standard
Finish
Note
:
:
:
:
drop forged mild steel
DIN 1480
electro-galvanized
supplied with locking nuts
8
9
diameter
thread
10
E-6353
a
mm
6
8
10
12
14
16
20
22
24
30
11
12
13
14
15
16
86
length
closed
position
b
mm
191
194
236
266
316
374
438
466
514
544
length
open
position
c
mm
277
274
325
349
406
490
570
611
691
709
length
body
opening
jaw
length
inside
d
mm
110
110
125
125
140
170
200
220
255
255
e
mm
7.5
8.5
11
13
16
18
20
22
24
30
f
mm
12
12
16
20
30
38
42
44
46
50
g
mm
M 6
M 6
M 8
M 10
M 12
M 12
M 16
M 18
M 20
M 24
h
mm
5
6
8
10
12
12
16
18
20
22
i
mm
13
14
18
24
28
32
38
40
42
46
kg
0.16
0.21
0.38
0.66
1.15
1.45
2.61
3.24
4.35
6.48
Turnbuckles
Rigging screws with Welding Ends
• Material
• Standard
• Finish
E-6355
diameter
thread
a
mm
6
8
10
12
14
16
20
22
24
30
: DIN 1480
: Body
Welding ends : self coloured
length
closed
position
b
mm
240
240
300
300
330
400
440
440
520
520
length
open
position
c
mm
326
320
389
383
420
516
572
585
697
685
length
body
d
mm
110
110
125
125
140
170
200
220
255
255
length
body
inside
e
mm
86
80
89
83
90
116
132
145
177
165
length
stub-ends
length
thread
f
mm
120
120
150
150
165
200
220
220
260
260
g
mm
65
65
75
75
85
100
120
130
150
160
weight
per
100 pcs
kg
9.3
14
29
40
66
89
160
227
282
423
1
2
3
4
5
Closed body rigging screws
6
Jaw - Jaw
•
•
•
•
Material
Safety factor
Finish
Note
:
:
:
:
mild steel
MBL equals 5 x WLL
end fittings of 6 and 8 mm rigging screws are electro-galvanized
7
8
G-6343
working diameter length
load
thread
body
limit
a
b
tons
mm
mm
0.2
6
100
0.32
8
108
0.5
10
125
0.7
12
195
1.2
16
230
1.5
20
270
2.2
22
295
3.2
24
325
4.8
33
370
6
39
400
8.5
45
400
11
48
400
length
length diameter length
closed
open
pin
inside
position position
c
d
e
f
mm
mm
mm
mm
175
255
5
19
199
282
6
25
222
320
8
26
320
479
10
32
388
572
12
39
454
672
16
46
490
730
20
55
558
819
22
63
681
977
30
85
710
1017
33
86
760
1050
39
105
820
1110
45
120
opening
jaw
width
jaw
g
mm
7
9
10.5
13
18
20
25
30
38
45
50
58
h
mm
20
24
28
34
42
51
55
70
82
85
100
118
diameter weight
jaw
per pce
eye
i
mm
kg
13
0.16
14
0.27
19
0.45
22
0.85
28
1.57
33
2.67
38
3.68
46
5.3
60
12
76
14.2
86
20.8
92
24
9
10
11
12
13
14
15
16
87
Turnbuckles
Eye - Eye
•
•
•
•
G-6340
1
2
Material
Safety factor
Finish
Note
working diameter
load
thread
limit
a
tons
mm
0.2
6
0.32
8
0.5
10
0.7
12
1.2
16
1.5
20
2.2
22
3.2
24
4.8
33
6
39
8.5
45
11
48
:
:
:
:
mild steel
MBL equals 5 x WLL
length
body
b
mm
100
108
125
195
230
270
295
325
370
400
400
400
length
length diameter
closed
open
position position
c
d
e
mm
mm
mm
165
245
5.5
178
261
6
210
308
8.5
325
484
11
380
564
12
455
673
16
495
736
16
545
806
19
665
961
29
725
1032
34
760
1050
30
820
1110
35
length
eye
inside
f
mm
11
12
13
30
40
50
50
56
70
80
90
100
width
eye
inside
g
mm
11
12
13
15
20
24
24
28
35
40
45
45
weight
per pce
kg
0.13
0.2
0.6
0.8
1.4
2.4
3
4
9
11.5
20.8
24
3
4
5
6
Eye - Jaw
•
•
•
•
7
Material
Safety factor
Finish
Note
:
:
:
:
mild steel
MBL equals 5 x WLL
8
9
10
G-6345
11
12
13
14
15
16
88
working diameter length length length
load
thread
body closed open
limit
position position
a
b
c
d
tons
mm
mm
mm
mm
0.2
6
100
170
248
0.32
8
108
189
273
0.5
10
125
216
306
0.7
12
195
323
478
1.2
16
230
384
569
1.5
20
270
455
665
2.2
22
295
493
723
3.2
24
325
552
802
4.8
33
370
673
963
6
39
400
718
1018
8.5
45
400
760
1050
11
48
400
820
1110
diameter length opening
pin
jaw
jaw
inside
e
f
g
mm
mm
mm
M 5
19
7
M 6
25
9
M 8
26
10.5
M 10
32
13
M 12
39
18
M 16
46
20
M 20
55
25
M 22
63
30
M 30
85
38
M 33
86
45
M 39
105
50
M 45
120
58
width
jaw
h
mm
20
24
28
34
42
51
55
70
82
85
100
118
diameter length
jaw
eye
eye
inside
i
j
mm
mm
13
11
14
12
19
13
22
30
28
40
33
50
38
50
46
56
60
70
76
80
86
90
92
100
width
eye
inside
k
mm
11
12
13
15
20
24
24
28
35
40
45
45
weight
per pce
kg
0.14
0.24
0.53
0.83
1.49
2.54
3.34
4.65
10.5
12.8
20.8
24
Turnbuckles
Turnbuckles (hamburgers)
for deck lashing
• Material
• Finish
S-6330
minimum
breaking
load
tons
13
13
18
18
20
20
21
21
: mild steel
: self coloured
diameter
thread
length
thread
diameter
bow
length
bow
weight
per pce
a
mm
24
24
27
27
30
30
36
36
b
mm
400
500
400
500
400
500
400
500
c
mm
16
16
18
18
20
20
20
20
d
mm
210
260
210
260
210
260
210
260
kg
3
3.8
4.4
5.5
5
6.3
7
8.8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
89
Links
Applications
Connecting links are used for Grade 80 chain slings.
Master links and master link assemblies are used for 1, 2, 3 and 4-leg slings.
Range
Van Beest supplies a wide range of Green Pin® connecting links for chain with diameter 6-26 mm, as well as a
wide range of Green Pin® master links and Green Pin® master link assemblies.
Design
Master links can be supplied with or without a flat part for easy connection of the master link in the sling; the
connecting links are supplied unassembled but are designed for easy and quick assembly. All master links and
connecting links are suitable for lifting purposes, with a safety factor of four times the working load limit. Each
master link and connecting link carries the manufacturer’s symbol, the steel grade and the CE conformity code
stamped in the body.
Finish
All connecting links and master links are painted yellow or red.
Certification
Test certificates can be supplied upon request.
Connecting links, master links and master link assemblies should be inspected before use to ensure that:
• the link and the assemblies are both identifiable as being of the same steel grade;
• all markings are legible;
• links, assemblies and connecting links are free from nicks, gouges and cracks;
• a link with the correct Working Load Limit has been selected with respect to the sling design i.e. load to be lifted,
number of legs in the sling top angle etc. For further details we refer to EN 818, standard for Chain Slings;
• links, assemblies and connecting links may not be heat treated as this may affect their Working Load Limit;
• during the assembly of connecting links, we promote the use of a lubricant on the pin.
7
It is required that the products are regularly inspected and that the inspection should take place minimally in
accordance with the safety standards given in the country of use. This is required because the products in use
may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the
material structure.
Inspection should take place at least every six months and even more frequently when the links are used in
90
Links
Green Pin® connecting links
for connecting grade 80 chain-slings
•
•
•
•
•
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
grade 80, alloy steel
MBL equals 4 x WLL
generally to EN 1677-4
painted yellow or red
test certificates can be supplied upon request
P-6860Y
P-6860R
working
for
diameter width
load
chain
outside
limit
diameter
a
b
tons
mm
mm
mm
1.12
6
8
43
2
7-8
9
54
3.2
10
10
66
5.3
13
14
83
8
16
17
103
12.7
18-20
21
120
15.5
22
26
143
21.7
26
30
160
width
inside
length
inside
length
inside
c
mm
10
14
18
21
25
33
40
44
d
mm
19
22
25
34
42
53
58
62
e
mm
45
55
64
85
105
129
140
153
diameter weight
eye
per pce
f
mm
11
13
19
24
28
34
37
43
kg
0.08
0.11
0.35
0.6
1.36
1.81
2.92
4.54
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
91
Links
Green Pin® master links
with flat part
• Material
• Safety factor
• Standard
• Finish
• Certification
• Note
: grade 80, alloy steel
: generally to EN 1677-4
formerly DIN 5688
: painted yellow
: test certificates can be supplied upon request
: masterlinks upto and including 45 mm are supplied with flat part
P-6835
working
load
limit
d
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
92
tons
1.6
3.1
4.5
6.2
8
10.6
12
15
20
25
30
37
50
63
100
125
diameter
length
inside
width
inside
thickness
a
mm
13
16
18
20
22
25
28
30
36
38
44
45
50
55
70
80
b
mm
100
120
135
150
150
170
200
200
250
250
280
300
300
350
400
400
c
mm
60
70
75
90
90
95
120
120
150
150
170
200
200
200
250
250
d
mm
6.6
6.8
8.8
8.8
11
13
13
16
16
20
20.5
22
-
weight
per pce
kg
0.32
0.59
0.82
1.14
1.41
2.03
3.02
3.51
6.27
7.05
9.6
12.1
15.2
20.5
39.3
52.8
Links
Green Pin® master link assemblies
with flat part
• Material
• Safety factor
• Standard
• Finish
• Certification
• Note
: grade 80, alloy steel
: generally to EN 1677-4
formerly DIN 5688
: painted yellow
: master link assemblies up to and including 55 mm
are supplied with a flat part on the small links
P-6855
a
g
working diameter
load
limit
a
tons
mm
2.5
16
3.5
18
6.5
22
8.5
25
10
28
13
30
17
36
20
38
27
44
30
45
40
50
50
55
60
58
80
70
100
80
length
inside
width
inside
diameter
length
inside
b
mm
120
135
150
170
200
200
250
250
280
300
300
300
350
400
400
c
mm
70
75
90
95
120
120
150
150
170
200
200
200
200
250
250
d
mm
13
16
18
20
20
22
25
28
33
36
38
38
42
55
58
e
mm
100
100
120
120
120
135
135
170
200
200
150
150
150
300
300
inside
per pce
f
mm
60
60
70
70
70
75
75
95
120
120
90
90
90
150
150
g
mm
6.7
7.4
8.9
10.6
11
13.4
16.6
17.1
18
20
21
23
-
kg
1.2
1.8
2.9
3.9
4.9
6
9.6
12.6
19.7
22.5
24.5
28
34.6
74.7
92.4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
93
Swivels
Applications
Thrust bearing swivels are used to prevent wire rope or chain from transferring their normal twisting motion to
the item being lifted. Our swivels can be supplied with various types of end-fittings.
Green Pin® swivels are not designed to rotate under load, but are intended as positioning devices only.
For rotation under load, thrustbearing swivels should be used.
Range
Van Beest offers two types of swivels:
• Green Pin® swivels, ranging from Working Load Limit 0.39 up to 20.5 tons, with eye-eye or jaw-eye terminals.
• A full range of thrust-bearing swivels, Working Load Limit 3 tons up to 15 tons, with all possible types of combinations of terminals, where by the upper terminal is either an eye or a jaw (for semi-permanent fixation).
Each thrust bearing swivel is individually proof tested. Large sizes of thrust bearing swivels up to 750 tons can
be manufactured on request.
Design
The Green Pin® swivels are dropforged whereas the thrustbearing swivels are machined from carbon steel.
The range of thrustbearing swivels we supply are fitted with grease nipples to ensure long life and ease of
operation. Greasing depends on the frequency and intensity of use.
Each swivel carries the WLL marking, the manufacturer’s symbol and the CE conformity code.
Finish
Green Pin® eye-eye and jaw-eye swivels are hot dipped galvanized.
The thrust bearing swivels are painted blue.
Certification
Swivels should be inspected before use to ensure that:
8
-
swivels are free from nicks, gouges and cracks;
a swivel with the correct Working Load Limit has been selected with respect to the load to be carried;
swivels may not be heat treated as this may affect their Working Load Limit;
the bolt, nut or any other locking system cannot vibrate out of position.
The WLL should be applied in a straight pull and overloads are prohibited. Side loading is not allowed since the
swivels are not designed for this purpose.
Never replace a swivel pin or nut with a bolt other than the one designed for the purpose, as it may not be
suitable for the load imposed.
structure.
Inspection should take place at least every six months and even more frequently when the swivels are used in
94
Swivels
Green Pin® swivels
Eye - Eye
•
•
•
•
•
G-7713
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
high tensile steel, quenched and tempered
MBL equals 5 x WLL
generally to US Federal Spec. RR-C-271, Type VII, Class 2
load
outside
limit
a
b
tons
mm
mm
0.39
6
87
0.57
8
106
1.02
10
130
1.6
13
164
2.4
16
199
3.3
19
221
4.5
22
257
5.7
25
295
8.2
32
355
20.5
38
511
width
outside
length
inside
width
inside
length
inside
length
c
mm
32
41
51
64
76
89
102
114
143
178
d
mm
17
21
24
33
40
44
52
59
68
106
e
mm
19
25
32
38
44
51
57
64
80
102
f
mm
27
32
38
51
60
67
78
89
94
106
g
mm
75
90
110
138
167
183
213
245
291
435
weight
per pce
kg
0.1
0.18
0.32
0.6
1.13
1.82
2.83
4.06
7.43
20.8
1
2
3
4
5
®
Green Pin swivels
6
Jaw - Eye
•
•
•
•
•
G-7723
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
MBL equals 5 x WLL
generally to US Federal Spec. RR-C-271, Type VII, Class 3
load
limit
a
b
tons
mm
mm
0.39
6
86
0.57
8
98
1.02
10
121
1.6
13
154
2.4
16
186
3.3
19
211
4.5
22
242
5.7
25
297
8.2
32
341
20.5
38
529
7
8
width
outside
length
inside
width
inside
length
inside
length
width
inside
c
mm
32
41
51
64
76
89
102
114
143
178
d
mm
17
21
24
33
40
44
52
59
68
106
e
mm
19
25
32
38
44
51
57
64
80
102
f
mm
22
22
27
33
38
44
52
71
71
112
g
mm
67
75
92
114
135
154
178
217
248
375
h
mm
12
13
16
19
24
28
30
44
52
73
diameter weight
pin
per pce
i
mm
6
8
10
13
16
19
22
28
35
57
9
10
kg
0.11
0.17
0.32
0.65
1.12
1.76
2.66
4.46
7.14
24.8
11
12
13
14
15
16
95
Swivels
Thrust bearing swivels
Jaw - Jaw
•
•
•
•
P-7710
Material
Safety factor
Finish
Certification
working
load
limit
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
length
length
diameter
a
mm
210
251
330
378
448
b
mm
160
193
260
282
346
c
mm
75
95
121
121
140
tons
3
5
8.5
10
15
width
jaw
outside
d
mm
41
57
70
75
89
width
jaw
inside
e
mm
20
25
35
44
44
diameter
hole
weight
per pce
f
mm
20
23
29
38
38
kg
4.5
8.2
16.3
18.6
29
1
2
3
4
5
6
Jaw - Eye
7
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
8
9
P-7720
10
working
load
limit
tons
3
5
8.5
10
15
11
12
13
14
15
16
96
length
length
a
mm
203
244
321
368
438
b
mm
153
183
248
272
333
thickness diameter
c
mm
20
25
32
44
51
d
mm
75
95
121
121
140
width
jaw
outside
e
mm
41
57
70
75
89
width
jaw
inside
f
mm
20
25
35
44
44
diameter diameter
hole
hole
g
mm
20
23
29
38
38
h
mm
23
32
35
41
51
weight
per pce
kg
4.1
7.7
15.9
18.6
29.5
Swivels
Eye - Jaw
•
•
•
•
P-7730
Material
Safety factor
Finish
Certification
working
load
limit
tons
3
5
8.5
10
15
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
length
length
a
mm
203
244
318
362
429
b
mm
153
183
248
272
333
thickness diameter
c
mm
20
25
32
44
51
d
mm
75
95
121
121
140
width
jaw
outside
e
mm
41
57
70
75
89
width
jaw
inside
f
mm
20
25
35
44
44
diameter diameter
hole
hole
g
mm
20
23
29
38
38
h
mm
23
32
35
41
51
weight
per pce
kg
4.1
7.7
15.9
18.6
29.5
1
2
3
4
5
6
Eye - Eye
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
7
8
P-7740
working
load
limit
tons
3
5
8.5
10
15
length
length
thickness
diameter
diameter
hole
a
mm
200
238
308
352
419
b
mm
150
174
232
256
311
c
mm
20
25
32
44
51
d
mm
75
95
121
121
140
e
mm
23
32
35
41
51
9
weight
per pce
10
kg
3.6
6.8
15
17.7
28.1
11
12
13
14
15
16
97
Swivels
Hook - Jaw
•
•
•
•
Material
Safety factor
Finish
Certification
working
load
limit
P-7750
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
length
diameter
a
mm
273
337
457
479
578
b
mm
75
95
121
121
140
tons
3
5
8.5
10
15
width
jaw
outside
c
mm
41
57
70
75
89
width
jaw
inside
d
mm
20
25
35
44
44
diameter
hole
weight
per pce
e
mm
20
23
29
38
38
kg
5
9.5
20.8
24
36.3
1
2
3
4
5
6
Hook - Eye
7
•
•
•
•
8
Material
Safety factor
Finish
Certification
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
9
10
P-7760
11
working
load
limit
tons
3
5
8.5
10
15
12
13
14
15
16
98
length
thickness
diameter
diameter
hole
weight
per pce
a
mm
270
330
448
470
568
b
mm
20
25
32
44
51
c
mm
75
95
121
121
140
d
mm
23
32
35
41
51
kg
4.5
9.1
20.4
23.6
35.4
Swivels
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
99
Hooks
Applications
Hooks are used in lifting systems as a connection between the load to be lifted and the wire rope or chain
slings.
Range
Van Beest offers a wide range of hooks, from drop forged carbon steel hooks to drop forged alloy steel swivel
hooks, which are quenched and tempered.
Upon special request other types of hooks can be offered.
Design
There are different types of hooks with their specific designs to suit a particular purpose. Eye hooks and swivel
hooks are designed for wire rope or chain. Pipe line hooks are specially designed for handling tubes easily.
Most types of hooks are supplied with a safety latch.
All types carry the following markings:
•
•
•
•
•
Working Load Limit;
manufacturer’s identification symbol;
steel grade;
traceability code;
CE;
Finish
The grade 8 hooks are painted red, grade 4 hooks are painted green.
Upon request hooks can be supplied galvanized or self coloured.
Certification
All hooks can be supplied with test certificates upon request.
Hooks should be inspected before use to ensure that:
9
•
•
•
•
•
•
•
•
•
hooks are free from nicks, gouges and cracks;
the latch is functional;
a hook with the correct Working Load Limit has been selected with respect to the sling design i.e. the load to
be lifted, the number of legs in the sling, the top angle etc. For further details we refer to EN 818, norm for Chain
Slings;
the hook is never side-, tip- or back-loaded;
always make sure that the hook is supporting the load correctly, the latch should not be supporting the load;
hooks may not be heat treated as this may affect their Working Load Limit;
never repair or reshape a hook by welding, heating or bending as this may affect the Working Load Limit;
do not swivel a swivel hook when it is supporting a load.
Inspection should take place at least every six months and even more frequently when the hooks are used in
100
Hooks
Green Pin® large eye hooks, grade 4
with safety latch
•
•
•
•
•
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
carbon steel, grade 4
MBL equals 5 x WLL
painted green
P-6714C
working
load
limit
tons
0.8
1
1.6
2
3.2
5
7.5
10
15
length
a
mm
82
93
103
120
147
187
230
256
318
diameter width
width thickness
eye
opening opening
inside
b
c
d
e
mm
mm
mm
mm
19
24
20
15
25
26
22
18
28
27
23
20
32
32
27
23
40
41
35
29
51
51
43
37
64
61
53
46
72
65
58
58
90
85
78
63
width
f
mm
20
22
27
30
38
46
58
66
77
diameter weight
eye
per pce
outside
g
mm
kg
38
0.27
45
0.4
52
0.55
60
0.83
74
1.9
97
3.5
122
6.9
136
10.5
168
17.5
1
2
3
4
5
6
Green Pin® large eye hooks, grade 8
with safety latch
•
•
•
•
•
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
7
alloy steel, grade 8
MBL equals 4 x WLL
painted red
8
9
P-6714A
working
load
limit
tons
1.25
1.6
2.5
3.2
5.4
8
11.5
16
22
length
a
mm
82
93
103
120
147
187
230
256
318
diameter width
width thickness
eye
opening opening
inside
b
c
d
e
mm
mm
mm
mm
19
24
20
15
25
26
22
18
28
27
23
20
32
32
27
23
40
41
35
29
51
51
43
37
64
61
53
46
72
65
58
58
90
85
78
63
width
f
mm
20
22
27
30
38
46
58
66
77
diameter weight
eye
per pce
outside
g
mm
kg
38
0.27
45
0.4
52
0.55
60
0.83
74
1.9
97
3.5
122
6.9
136
10.5
168
17.5
10
11
12
13
14
15
16
101
Hooks
Green Pin® swivel hooks, grade 4
with safety latch
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
carbon steel, grade 4
MBL equals 5 x WLL
painted green
P-6703C
working
load
limit
tons
0.8
1
1.6
2
3.2
5
7.5
10
15
20
1
length
length
inside
a
mm
116
145
165
175
214
264
308
344
427
505
b
mm
28
36
49
45
55
70
74
86
114
125
width
width diameter
opening opening
c
mm
24
26
27
32
41
51
61
65
85
90
d
mm
20
22
23
27
35
43
53
58
78
82
e
mm
11
14
17
17
21
26
29
35
40
48
width
diameter
width
f
mm
20
22
27
30
38
46
58
66
77
90
g
mm
52
67
81
81
106
129
148
165
200
235
h
mm
30
36
42
42
64
77
92
105
130
146
width
diameter
width
f
mm
20
22
27
30
38
46
58
66
77
90
g
mm
52
67
81
81
106
129
148
165
200
235
h
mm
30
36
42
42
64
77
92
105
130
146
thickness weight
per pce
i
mm
15
18
20
23
29
37
46
58
63
82
kg
0.45
0.9
1.3
1.6
3.8
6.9
10.6
16
27
60
2
3
4
5
6
Green Pin® swivel hooks, grade 8
with safety latch
7
•
•
•
•
8
Material
Safety factor
Finish
Certification
:
:
:
:
MBL equals 4 x WLL
painted red
P-6703A
9
10
working
load
limit
11
tons
1.25
1.6
2.5
3.2
5.4
8
11.5
16
22
30
12
13
14
15
16
102
length
length
inside
a
mm
116
145
165
175
214
264
308
344
427
505
b
mm
28
36
49
45
55
70
74
86
114
125
width
width diameter
opening opening
c
mm
24
26
27
32
41
51
61
65
85
90
d
mm
20
22
23
27
35
43
53
58
78
82
e
mm
11
14
17
17
21
26
29
35
40
48
thickness weight
per pce
i
mm
15
18
20
23
29
37
46
58
63
82
kg
0.45
0.9
1.3
1.6
3.8
6.9
10.6
16
27
60
Hooks
Green Pin® pipe line hooks
for handling large cylindrical shapes like pipe lines, tubes etc.
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
alloy steel
MBL equals 5 x WLL
painted red
P-6731
working load
limit at hook
top
bottom
tons
2
length
a
mm
167
tons
7.5
diameter
eye
inside
b
mm
35
width
opening
c
mm
74
eye
outside
d
e
f
mm
mm
mm
30
32
74
width
g
mm
57
weight
per pce
kg
2.65
1
2
3
4
5
6
Green Pin® sliding choker hooks, grade 8
with safety latch
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
7
MBL equals 5 x WLL
painted red
8
P-6706A
9
e
g
a
d
working
load
limit
tons
0.8
1.6
2.5
3.2
5.4
c
b
f
diameter
rope
mm
6-11
10-13
14-16
16-20
22-26
length
width
thickness
length
a
mm
112
143
170
196
260
b
mm
63
82
98
115
142
c
mm
19
26
30
36
46
d
mm
65
83
97
110
145
diameter thickness opening
e
mm
14
17
19
22
36
f
mm
30
30
33
40
60
g
mm
16
19
25
28
35
weight
per pce
kg
0.4
0.8
1.2
1.9
4.3
10
11
12
13
e
14
15
16
103
Hooks
Viking hooks
with tapered opening
•
•
•
•
Material
Safety Factor
Finish
Certification
:
:
:
:
MBL equals 4 x WLL
painted yellow
P-6760
d
working
load
limit
f
tons
3
5
8
a
e
length
width
width
inside
diameter
inside
length
inside
length
thickness
width
opening
weight
per pce
a
mm
117
136
155
b
mm
70
84
97
c
mm
26
31
35
d
mm
30
35
39
e
mm
41
42
48
f
mm
82
92
106
g
mm
20
25
31
h
mm
2
2
3
kg
0.7
1.2
1.9
c
b
1
2
h
3
g
4
5
6
Fishcon hooks
7
8
•
•
•
•
P-6768
c
Material
Safety Factor
Finish
Certification
:
:
:
:
MBL equals 4 x WLL
painted yellow
g
e
9
10
a
working
length
width
width
length
length
load
f
11
b
12
i
I
13
14
j
15
k
16
104
width
width
inside
inside
inside
thickness
width
thickness thickness weight
opening
per pce
limit
d
h
length
a
b
c
d
e
f
g
h
i
j
k
l
tons
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
3.2
159
70
83
21
17
41
28
26
24
2
20
14
1.6
5.3
185
84
103
27
21
42
34
31
28
2
25
17
2.1
Hooks
G-hooks
•
•
•
•
Material
Safety Factor
Finish
Certification
:
:
:
:
MBL equals 5 x WLL
painted yellow
P-6765
working
load
limit
d
c
h
b
a
tons
1.5
2.6
4
6
length
length
inside
width
diameter
width
inside
width
width
a
mm
91
115
140
160
b
mm
34
42
57
64
c
mm
8
12
8
13
d
mm
18
21
25
30
e
mm
22
27
32
34
f
mm
35
44
53
67
g
mm
60
78
92
111
opening
per pce
h
mm
4
4
4
5
i
mm
21
26
28
31
kg
0.4
0.8
1.3
2.0
f
e
g
1
2
3
4
i
5
6
7
8
9
10
11
12
13
14
15
16
105
Eye Bolts/ Eye Nuts
Applications
Eye bolts and eye nuts are used for lifting machines, appliances or any other objects which cannot be lifted by
hand or by fork lift truck.
Range
Van Beest offers a wide range of lifting eye bolts and eye nuts, from M6 up to M64, with Working Load Limits
from 0.07 tons up to 16 tons.
Larger sizes can be supplied on request.
Design
The eye bolts and eye nuts are manufactured from C15 or C15E steel, drop forged and with metric thread.
Each eye bolt and eye nut is individually stamped with:
-
Working Load Limit valid for in-line pull;
thread diameter;
material identification symbol C15 or C15E;
manufacturer’s symbol;
CE.
Finish
The eye bolts and eye nuts can be either self coloured, electro-galvanized or hot dipped galvanized.
Certification
Eye bolts and eye nuts should be inspected before use to ensure that:
•
•
•
•
•
•
eye bolts and eye nuts are free from nicks, gouges and cracks;
make sure the thread is undamaged and clean;
an eye bolt or eye nut with the correct Working Load Limit has been selected with respect to load to be lifted;
eye bolts or eye nuts may not be heat treated as this may affect their Working Load Limit;
never repair or reshape an eye bolt or eye nut by welding, heating or bending as this may affect the Working
Load Limit;
• never grind, machine or cut an eyebolt or eye nut;
• when used as lifting devices, the eye bolt or eye nut should always be screwed into the object to be lifted in
such a way that they fit properly against the object to be lifted;
• Working Load Limits are valid for in-linepull only and have to be reduced for non-axial loading, for further details
please refer to the standard, DIN 580 for eye bolts or DIN 582 for eye nuts.
10
106
S-8140
E-8140
•
•
•
•
Material
Safety factor
Standard
Finish
:
:
:
:
carbon steel, C15
MBL equals 6 x WLL
self coloured
electro-galvanized
: certificates can be supplied on request
• Certification
working diameter diameter diameter diameter
load
thread
base
eye
eye
limit
outside inside
a
b
c
d
tons
mm
mm
mm
mm
0.07
M 6
20
36
20
0.14
M 8
20
36
20
0.23
M 10
25
45
25
0.34
M 12
30
54
30
0.49
M 14
35
63
35
0.7
M 16
35
63
35
0.9
M 18
40
72
40
1.2
M 20
40
72
40
1.5
M 22
45
81
45
1.8
M 24
50
90
50
2.5
M 27
50
90
50
3.2
M 30
65
108
60
4.3
M 33
65
108
60
4.6
M 36
75
126
70
6.1
M 39
75
126
70
6.3
M 42
85
144
80
8
M 45
85
144
80
8.6
M 48
100
166
90
11.5
M 56
110
184
100
16
M 64
120
206
110
base
e
mm
13
13
17
20.5
27
27
30
30
35
36
36
45
45
54
54
63
63
68
78
90
f
mm
6
6
8
10
12
12
14
14
14
18
18
22
22
26
26
30
35
35
38
42
g
mm
36
36
45
53
60
62
71
71
80
90
90
109
110
128
130
147
150
168
187
208
weight
per
100 pcs
kg
3
6
10.3
17.7
27.7
28
40.5
42.4
67.3
83.4
122
166
216
265
334
403
521
632
880
1240
Eye Bolts/ Eye Nuts
Green Pin® eye bolts
1
2
3
4
5
®
Green Pin eye nuts
S-8142
E-8142
6
•
•
•
•
7
Material
Safety factor
Standard
Finish
• Certification
working
load
limit
tons
0.07
0.14
0.23
0.34
0.49
0.7
1.2
1.5
1.8
2.5
3.2
4.3
4.6
6.1
6.3
8
8.6
11.5
16
diameter
thread
a
mm
M 6
M 8
M 10
M 12
M 14
M 16
M 20
M 22
M 24
M 27
M 30
M 33
M 36
M 39
M 42
M 45
M 48
M 56
M 64
:
:
:
:
carbon steel, C15
MBL equals 6 x WLL
self coloured,
electro-galvanized
: certificates can be supplied on request
diameter
base
b
mm
20
20
25
30
35
35
40
45
50
50
65
65
75
75
85
85
100
110
120
diameter
eye
outside
c
mm
36
36
45
54
63
63
72
81
90
90
108
108
126
126
144
144
166
184
206
diameter thickness
eye
base
inside
d
e
mm
mm
20
8.5
20
8.5
25
10
30
11
35
13
35
13
40
16
45
18
50
20
50
20
60
25
60
25
70
30
70
30
80
35
80
35
90
40
100
45
110
50
8
height
f
mm
36
36
45
53
60
62
71
80
90
90
109
110
128
130
147
150
168
187
208
weight
per
100 pcs
kg
4.2
5.2
9.4
16
22
24
35.2
58.6
70.6
102
132
170
208
260
311
407
502
669
930
9
10
11
12
13
14
15
16
107
Eye Bolts/ Eye Nuts
Green Pin® eye bolts C15E
S-8180
E-8180
•
•
•
•
Material
Safety factor
Standard
Finish
• Certification
:
:
:
:
carbon steel, C15E
MBL equals 6 x WLL
DIN 580
selfcoloured
electro-galvanized
: certificates can be supplied upon request
working diameter diameter diameter diameter
load
thread
base
eye
eye
limit
outside inside
a
b
c
d
tons
mm
mm
mm
mm
0.14
M 8
20
36
20
0.23
M 10
25
45
25
0.34
M 12
30
54
30
0.7
M 16
35
63
35
1.2
M 20
40
72
40
1.8
M 24
50
90
50
3.2
M 30
65
108
60
4.6
M 36
75
126
70
1
base
e
mm
13
17
20.5
27
30
36
45
54
f
mm
6
8
10
12
14
18
22
26
g
mm
36
45
53
62
71
90
109
128
weight
per
100 pcs
kg
6
10.3
17.7
28
42.4
83.4
166
265
2
3
4
5
Green Pin® eye nuts C15E
6
7
S-8182
E-8182
8
•
•
•
•
Material
Safety factor
Standard
Finish
• Certification
working
load
limit
9
10
tons
0.14
0.23
0.34
0.7
1.2
1.8
3.2
4.6
11
12
13
14
15
16
108
:
:
:
:
carbon steel, C15E
MBL equals 6 x WLL
DIN 582
selfcoloured
electro-galvanized
: certificates can be supplied upon request
diameter
thread
diameter
base
a
mm
M 8
M 10
M 12
M 16
M 20
M 24
M 30
M 36
b
mm
20
25
30
35
40
50
65
75
diameter
eye
outside
c
mm
36
45
54
63
72
90
108
126
diameter thickness
eye
base
inside
d
e
mm
mm
20
8.5
25
10
30
11
35
13
40
16
50
20
60
25
70
30
height
f
mm
36
45
53
62
71
90
109
128
weight
per
100 pcs
kg
5.2
9.4
16
24
35.2
70.6
132
208
Eye Bolts/ Eye Nuts
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
109
Loadbinders
Applications
Loadbinders are used for easy and efficient tightening of chain used for lashing purposes. The loadbinders are
designed in such a way that they can effortlessly be operated using one hand.
Range
Van Beest offers three types of loadbinders: two ratchet types and a lever type, depending on the application. The
loadbinders are suitable for various chain sizes, ranging from 8 up to 16 mm. The ratchet types can be supplied
with two hooks or two eyes as endfittings.
Design
The Van Beest loadbinders are designed with an ergonomic, easy-to-use handle for simple, single-hand use,
and are manufactured from drop forged or cast steel. One ratchet type is equipped with standard chain eye grab
hooks, the other type has an improved version of these hooks to reduce chain wear substantially.
This type of loadbinder is designed to meet requirements of standard EN 12195-3.
Each handle carries the following markings:
-
chain diameter, for which the loadbinder is suitable;
manufacturer’s symbol (VBS);
not for lifting or hoisting applications;
Lashing Capacity;
minimum breaking load.
Finish
The Van Beest loadbinders are painted either red or green.
Certification
Loadbinders should be inspected before use to ensure that:
•
•
•
•
loadbinders are free from nicks, gouges and cracks;
loadbinders should never be used for lifting or hoisting applications;
a loadbinder with the correct Lashing Capacity has been selected with respect to chain size and load to be
lashed. For further details we refer to EN 12195-3, standard for Lashing Chains;
• the loadbinder should never be side-loaded, since loadbinders are suitable for in-line pull only;
• the loadbinder must be hooked to the chain in such a way that you can operate the loadbinder while standing
on the ground;
• never use a loadbinder while standing on the load;
• always keep yourself out of the path of the moving handle;
• if the handle of the lever type loadbinder cannot reach the correct locked position, never use a cheater pipe.
In that case a ratchet type loadbinder must be used;
• in the locked position of a lever type load binder the bottom side of the loadbinder should touch the chain link. In
this position secure the handle to the chain using the loose end of the chain or a piece of rope or soft wire;
• loadbinders may not be heat treated as this may affect their Lashing Capacity;
• never repair or reshape a loadbinder by welding, heating or bending as this may affect the Lashing
Capacity;
• if the handle of a lever type loadbinder is released by hand, make sure you use an open hand under the
handle and push upward. Do not close your hand around the handle. Move the handle with caution since it
may whip as it comes free. Keep your body away from the moving handle.
11
structure. Inspection should take place at least every six months and even more frequently when the loadbinders
are used in severe operating conditions. Regularly lubricate moving parts of a loadbinder to extend product life
and reduce wear.
110
Loadbinders
Green Pin® ratchet type loadbinders
with hooks, according to EN 12195-3
•
•
•
•
•
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
drop forged, Grade 8, quenched and tempered
MBL equals 2 x Lashing Capacity
EN 12195-3
painted red
P-7170
C
G
chain
size
mm
8
10
13
16
D
EF
length diameter thickness length
barrel
a
mm
355
355
355
355
b
mm
66
66
66
66
c
mm
16
16
16
16
length
open
length
closed
width
e
mm
742
789
866
892
f
mm
573
620
703
733
g
mm
11
13
17
20
d
mm
252
252
252
252
take-up lashing
capacity
mm
169
169
163
159
tons
4
6.3
10
16
proof minimum weight
load breaking per pce
load
tons
5
7.9
12.5
20
tons
8
12.6
21.2
32.2
kg
4.5
5.4
7.7
10.2
1
A
2
3
B
4
5
6
without hooks, according to EN 12195-3
•
•
•
•
•
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
7
drop forged, Grade 8, quenched and tempered
MBL equals 2 x Lashing Capacity
EN 12195-3
painted red
8
P-7190
9
c
chain
length
diameter thickness
size
g
h
d
e, f
length
length
length
barrel
open
closed
diameter diameter take-up
eye
eye
lashing
proof
minimum
capacity
load
breaking per pce
weight
inside
outside
a
b
c
d
e
f
g
h
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
tons
tons
tons
kg
8
355
66
16
252
513
344
20
52
169
4
5
8
3.8
10
355
66
16
252
513
344
26
60
169
6.3
7.9
12.6
4.6
13
355
66
16
252
513
350
34
74
163
10
12.5
21.2
6.9
16
355
66
16
252
511
352
34
74
159
16
20
32.2
9.3
10
load
11
12
13
a
14
15
b
16
111
Loadbinders
with hooks
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
drop forged/cast steel, quenched and tempered
MBL equals 3.5 x Lashing Capacity
painted red or green
P-7130R
P-7130G
c
chain
size
mm
8-10
10-13
13-16
g
d
e, f
length diameter thickness length
handle
barrel
a
mm
355
355
355
b
mm
66
66
66
c
mm
16
16
16
length
open
length
closed
width
e
mm
750
770
840
f
mm
580
600
685
g
mm
13
16
19
d
mm
254
254
254
take-up lashing
capacity
mm
170
170
155
tons
2.45
4.175
5.9
load
tons
4.9
8.35
11.8
tons
8.62
14.97
20.865
kg
4.82
5.92
7.85
weight
1
a
2
3
b
4
5
6
without hooks
7
•
•
•
•
8
Material
Safety factor
Finish
Certification
:
:
:
:
P-7150R
P-7150G
9
c
10
11
12
hg
d
e, f
13
a
14
15
b
16
112
chain
length
size
handle
diameter thickness
length
length
length
barrel
open
closed
diameter diameter take-up
eye
eye
lashing
proof
minimum
capacity
load
breaking per pce
inside
outside
a
b
c
d
e
f
g
h
load
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
tons
tons
8-10
355
66
16
254
550
380
20
52
170
2.45
4.9
8.62
3.95
10-13
355
66
16
254
550
380
20
52
170
4.175
8.35
14.97
4.75
13-16
355
66
16
254
570
400
25
60
170
5.9
20.865
6.65
11.8
tons
kg
Loadbinders
Green Pin® lever type loadbinders
with hooks
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
P-7110R
P-7110G
chain
size
e
mm
8 -10
10 -13
b
length
length
open
length
closed
length
handle
length
length
width
a
mm
630
715
b
mm
580
662
c
mm
485
548
d
mm
406
475
e
mm
275
320
f
mm
275
310
g
mm
13
15
take-up lashing
capacity
mm
95
114
tons
2.45
4.175
load
tons
4.9
8.35
tons
8.62
14.97
kg
2.81
5.08
1
2
d
a
3
c
f
g
4
5
Green Pin® spring type loadbinders
with hooks
6
P-7120
• Material
• Safety factor
: drop forged/cast steel, quenched and tempered
: 8-10 mm: MBL equals 3.5 x Lashing Capacity
10-13 mm: MBL equals 3 x Lashing Capacity
: painted green
• Finish
• Certification
7
8
G
D
9
B
chain
length
length
length
length
open
closed
handle
a
b
c
d
e
f
g
size
length
length
width
take-up
lashing
proof
minimum
weight
capacity
load
breaking per pce
10
load
E
mm
mm
mm
mm
mm
mm
mm
mm
mm
tons
tons
tons
kg
8 - 10
873
836
739
392
285
450
13
97
2.45
4.9
8.575
7.2
10 - 13
940
903
791
438
330
475
15
112
4.175
8.35
12.525
9.0
11
H
12
13
C
14
15
F
16
113
Chain
Applications
Short and long link commercial grade 3 chain is for general purpose use. These types of chain may not be used
for lifting purposes.
Range
Van Beest supplies a wide range of commercial chain, generally to DIN 763 and DIN 766 ranging from 3 up to
20 mm.
Larger dimensions can be supplied on request.
Design
Chain supplied by Van Beest generally follows DIN 763 for the long link chain or DIN 766 for short link chain.
Steel quality used for chain production is mild steel grade 3.
These types of chain are not suitable for lifting purposes.
Finish
All chain is available in self coloured, electro-galvanized and hot dipped galvanized condition.
Certification
Chain should be inspected before use to ensure that:
•
•
•
•
•
chain is free from nicks, gouges and cracks;
chain may not be heat treated as this may affect the Minimum Breaking Load;
DIN 766 and DIN 763 chain may not be used for lifting purposes;
chain is used for in-line pull only;
never repair or reshape a chain by welding, heating or bending as this may affect the Minimum Breaking
Load.
structure.
Inspection should take place at least every six months and even more frequently when the chain is used in severe
operating conditions.
12
114
Chain
Short link chain
generally to DIN 766, commercial quality
Not to be used for lifting applications!
•
•
•
•
Material
Standard
Finish
Certification
:
:
:
:
diameter
length
inside
b
mm
16
16
18.5
18.5
22
24
27
28
31
36
45
50
56
a
mm
3
4
5
6
7
8
9
10
11
13
16
18
20
S-7660
E-7661
G-7662
mild steel, grade 3
self coloured, electro-galvanized or hot dipped galvanized
test certificates can be supplied on request
width
outside
c
mm
11
14
17
20
23
26
30
34
36
44
54
60
67
weight
per m
kg
0.17
0.32
0.5
0.75
1
1.35
1.8
2.25
2.7
3.8
5.8
7.3
9
1
2
3
4
5
6
Long link chain
generally to DIN 763, commercial quality
Not to be used for lifting applications!
7
•
•
•
•
8
Material
Standard
Finish
Certification
:
:
:
:
mild steel, grade 3
self coloured, electro-galvanized or hot dipped galvanized
test certificates can be supplied on request
9
diameter
S-7630
E-7631
G-7632
a
mm
3
4
5
6
7
8
10
13
16
20
length
inside
b
mm
26
32
36
42
48
54
66
82
100
125
width
outside
c
mm
13
16
20
24
28
32
40
50
60
75
weight
per m
10
kg
0.14
0.27
0.43
0.63
0.86
1.1
1.75
2.95
4.45
7
11
12
13
14
15
16
115
Plate Lifting Clamps
Applications
Plate lifting clamps are used for lifting and transportation of all kinds of steel plates and beams.
Range
Van Beest offers a wide range of lifting clamps for horizontal and/or vertical lifting of steel plates and beams
ranging from Working Load Limit 750 kg up to 20.000 kg.
The steel plates may have a thickness up to 150 mm.
Upon request other types of clamps can be manufactured.
Design
Four different designs have been developed:
•
•
•
•
type
type
type
type
E for lifting and vertical transportation of steel plates;
EH for horizontal transportation of steel plates;
EU a universal type for transportation in all directions;
ESV for transportation of steel beams.
Type E, EH and EU are also available as ES, EHS and EUS versions, which means that these versions have an
increased opening.
All types of lifting clamps carry the following markings:
•
•
•
•
•
•
Working Load Limit;
manufacturer’s identification symbol (VBS);
traceability code;
jaw opening;
CE;
serialnumber.
Finish
The plate lifting clamps are made of carbon and alloy steel and are painted green to be recognized as a Green
Pin® product.
Certification
All plate lifting clamps are supplied with a serial number and a manufacturer’s certificate. Test certificates can be
supplied upon request.
12
116
Plate lifting clamps should be inspected before use to ensure that:
•
•
•
•
•
•
•
plate lifting clamps are free from nicks, gouges and cracks;
a clamp with the correct Working Load Limit has been selected with respect to the load to be lifted;
always make sure that the clamp is supporting the load correctly;
the WLL should be applied in a straight pull and overloads are not permitted;
clamps may not be heat treated as this may affect their Working Load Limit;
never repair or reshape a clamp by welding, heating or bending as this may affect the Working Load Limit.
structure.
Inspection should take place at least every six months and even more frequently when the clamps are used in
E - ES
1
2
3
4
Plate lifting clamps type E and ES.
Do not side load the lifting eye.
5
EU - EUS
6
7
8
9
Plate lifting clamps type EU and EUS.
Load reduction should be applied as per load direction angle and
corresponding remaining percentage of the Working Load Limit.
10
11
EH - EHS
100% WLL
12
13
14
Plate lifting clamps type EH and EHS.
Full load may be applied up to a load direction
angle of maximum 30˚. Do not use larger angles.
15
16
117
Green Pin® plate lifting clamp, type E
for lifting and vertical transportation
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
P-6615
type
0.75
1
1.5
2
3
4
6
7.5
9
12
15
20
1
2
working
load
limit
E
E
E
E
E
E
E
E
E
E
E
E
carbon and alloy steel
MBL equals 5 x WLL
painted
manufacturer’s certificate including serial number
width
opening
length
opening
length
length
a
mm
0 - 14
0 - 22
0 - 22
0 - 28
0 - 28
0 - 32
0 - 32
0 - 42
0 - 52
0 - 75
0 - 75
0 - 75
b
mm
45
72
72
87
87
115
115
120
125
135
135
160
c
mm
115
200
200
237
237
293
293
350
380
480
480
550
d
mm
210
337
337
430
430
500
500
560
620
760
760
890
tons
0.75
1
1.5
2
3
4
6
7.5
9
12
15
20
diameter
inside
eye
e
mm
30
57
57
70
70
86
86
80
88
90
90
100
width
thickness
f
mm
104
170
170
218
218
226
226
305
274
410
410
490
g
mm
36
44
52
65
77
69
85
90
90
130
130
140
width
thickness
f
mm
114
186
186
240
240
252
252
335
274
485
485
565
g
mm
36
44
52
65
77
69
85
90
90
130
130
140
weight
per pce
kg
1.5
6
7.1
13.2
14.2
21
24.2
35
48
90
90
132
3
4
5
6
Green Pin® plate lifting clamp, type ES
for lifting and vertical transportation
7
8
P-6616
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
MBL equals 5 x WLL
painted
9
10
type
11
0.75
1
1.5
2
3
4
6
7.5
9
12
15
20
12
13
14
15
16
118
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
working
load
limit
tons
0.75
1
1.5
2
3
4
6
7.5
9
12
15
20
width
opening
length
opening
length
length
a
mm
12 - 24
18 - 38
18 - 38
23 - 50
23 - 50
26 - 58
26 - 58
30 - 72
48 -100
75 -150
75 -150
75 -150
b
mm
45
72
72
87
87
115
115
120
125
135
135
160
c
mm
115
200
200
237
237
293
293
350
380
480
480
550
d
mm
210
337
337
430
430
500
500
560
620
760
760
890
diameter
inside
eye
e
mm
30
57
57
70
70
86
86
80
88
90
90
100
weight
per pce
kg
1.5
6
7.1
13.2
14.2
21
24.2
35
48
90
94
132
for lifting and transportation in all directions
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
P-6625
type
0.75 EU
1.5 EU
3
EU
6
EU
7.5 EU
9
EU
12
EU
working
load
limit
MBL equals 5 x WLL
painted
width
opening
length
opening
length
length
a
mm
0 - 14
0 - 22
0 - 28
0 - 32
0 - 42
0 - 52
0 - 75
b
mm
45
72
87
115
120
125
135
c
mm
115
200
237
293
350
380
480
d
mm
220
327
450
480
580
700
780
tons
0.75
1.5
3
6
7.5
9
12
diameter
inside
eye
e
mm
31
68
80
80
80
90
115
width
thickness
f
mm
104
170
218
226
305
274
410
g
mm
36
52
77
85
90
90
130
weight
per pce
kg
1.6
7.9
15.2
26
35
52
94
Green Pin® plate lifting clamp, type EU
1
2
3
4
5
6
Green Pin® plate lifting clamp, type EUS
for lifting and transportation in all directions
P-6626
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
7
MBL equals 5 x WLL
painted
8
9
type
0.75
1.5
3
6
7.5
9
12
EUS
EUS
EUS
EUS
EUS
EUS
EUS
working
load
limit
tons
0.75
1.50
3
6
7.5
9
12
width
opening
length
opening
length
length
a
mm
12 - 24
18 - 38
23 - 50
26 - 58
30 - 72
48 - 100
75 - 150
b
mm
45
72
87
115
120
125
135
c
mm
115
200
237
293
350
380
480
d
mm
220
327
430
480
580
700
780
diameter
inside
eye
e
mm
31
68
80
80
80
90
115
width
thickness
f
mm
114
186
240
252
335
384
485
g
mm
36
52
78
95
100
100
140
weight
per pce
kg
1.6
7.9
15
26
35
52
94
10
11
12
13
14
15
16
119
Green Pin® plate lifting clamp, type EH
for lifting and horizontal transportation
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
P-6635
type
1.5
3
4
6
8
10
14
18
1
EH
EH
EH
EH
EH
EH
EH
EH
MBL equals 5 x WLL
painted
working
width thickness diameter thickness
load limit opening
eye
per set
a
b
c
d
tons
mm
mm
mm
mm
1.5
0 - 22
18
16.2
12
3
0 - 60
16
23
25
4
0 - 60
20
42
25
6
0 - 60
20
42
25
8
0 - 60
25
42
25
10
0 - 60
25
42
30
14
0 - 60
30
48
35
18
0 - 60
30
48
40
width
length
width
e
mm
16
18
22
22
27
27
32
32
f
mm
70
155
155
155
155
155
155
155
g
mm
60
80
80
100
120
120
130
150
weight
per set
kg
4
11
16.4
17.8
20
28
36
48.2
2
3
4
5
Green Pin® plate lifting clamp, type EHS
for lifting and horizontal transportation
6
7
P-6636
•
•
•
•
Material
Safety factor
Finish
Certification
:
:
:
:
MBL equals 5 x WLL
painted
8
9
type
10
3
4
6
8
10
14
18
11
12
13
14
15
16
120
working
width thickness diameter thickness
load limit opening
eye
per set
a
b
c
d
tons
mm
mm
mm
mm
EHS
3
0 - 100
16
23
25
EHS
4
0 - 100
20
42
25
EHS
6
0 - 100
20
42
25
EHS
8
0 - 100
25
42
25
EHS 10
0 - 100
25
42
30
EHS 14
0 - 100
30
48
40
EHS 18
0 - 100
30
48
40
width
length
width
e
mm
18
22
22
27
27
32
32
f
mm
155
155
155
155
155
155
155
g
mm
80
80
100
120
120
130
150
weight
per set
kg
12.4
17.6
20
26
32
40
52
for lifting and transportation of steel beams
•
•
•
•
Material
Safety factor
Finish
Certification
P-6685
type
2
3
4
5
6
ESV
ESV
ESV
ESV
ESV
:
:
:
:
MBL equals 5 x WLL
painted
working width
width
length
load
jaw
jaw
limit
opening opening
a
b
c
tons
mm
mm
mm
2
0 - 160 60 - 200
270
3
0 - 160 60 - 200
270
4
0 - 250 80 - 310
400
5
0 - 260 90 - 320
400
6
0 - 340 85 - 420
480
height diameter
eye
inside
d
e
mm
mm
210 - 250
65
250 - 290
65
285 - 370
70
355 - 445
80
360 - 510
80
width
thickness
width
f
mm
120
120
125
125
125
g
mm
16
16
20
20
20
h
mm
22
22
28
36
36
weight
per pce
Green Pin® lifting clamp, type ESV
kg
5.1
5.3
8.6
11.1
14
1
2
3
4
5
Green Pin® plate lifting clamp
spare parts
6
7
8
P-6651 lifting eye
P-6652 lock lever assembly
9
S-6653 lock spring
10
11
P-6654 cam assembly
S-6655 cam pin
12
S-6656 pivot
13
14
S-6657 eye pin
15
P-6658 universal eye component
16
121
Blocks
Applications
Blocks are used in lifting systems, to change load direction or to drag a load. Together with the wire rope, blocks
are the connection between the load to be lifted and the lifting device.
Range
Van Beest offers a wide range of blocks, from single sheave snatch blocks to multiple-sheave malleable
iron blocks for use with wire or fibre rope. Standard blocks are suited for head loads ranging from 0.4 up to
20 tons.
Other types of blocks can be offered upon special request.
Design
There are different types of blocks with their specific designs to suit a particular purpose. Some types are equipped with bronze bushes while other types have ball bearings depending on frequency of use and line speed.
Snatch blocks allow the wire rope to be attached easily by opening up the block instead of threading the wire
rope through the block.
All types carry the following markings:
•
•
•
•
Working Load Limit;
manufacturer’s identification symbol (UBS);
traceability code;
CE.
Finish
Blocks can be either painted, electro-galvanized or self coloured.
Certification
All blocks can be supplied with test certificates upon request.
The basic objective of any lifting operation is to move the load to the desired location and land it safely, efficiently
and without damage to the load, the equipment used and/or the surrounding area.
The following point must be observed:
• Do not attempt any lifting operation unless you have been trained in the use of the equipment concerned;
Blocks should be inspected before use to ensure that:
•
•
•
•
blocks are free from nicks, gouges and cracks;
the sheaves are functional and rotate easily;
a block with the correct Working Load Limit has been selected with respect to the load being moved and the
wire rope being used;
• the block is never side-loaded but strictly used for straight or in-line pull;
• the Working Load Limit applies to static loads only, shock loading must be taken into account when selecting
a block;
• always make sure that the hook, eye or shackle of the block is supporting the load correctly;
• blocks may not be heat treated as this may affect their Working Load Limit;
• never repair or reshape a block by welding, heating or bending as this may affect the Working Load Limit.
14
structure.
Inspection should take place at least every six months and even more frequently when the blocks are used in
122
All working load limits of our blocks are the maximum loads on the blocks and their connecting fittings.
The load on a sheave or block varies with the angle between the lead and load line. See figure 1. When the
two lines are parallel, 1000 kg on the lead line results in a load of 2000 kg on the fitting. As the working angle
between the lines increases, the load on the fitting is reduced by the angle factor as per table 1. All loads shown
ignore frictional losses in the lifting system.
working
angle
0°
10°
20°
30°
40°
45°
50°
60°
70°
80°
90°
100°
110°
120°
130°
135°
140°
150°
160°
170°
180°
angle
factor
2
1.99
1.97
1.93
1.87
1.84
1.81
1.73
1.64
1.53
1.41
1.29
1.15
1
0.84
0.76
0.68
0.52
0.35
0.17
0
Blocks
Loads on blocks
1
2
3
Table 1
4
5
6
7
8
Figure 1
9
10
11
12
13
14
15
16
123
Blocks
Lifting with multiple line parts
2 parts of line
1
2
3 parts of line
4 parts of line
5 parts of line
6 parts of line
Method of reeving tackle blocks will vary with the application.
With heavy lifting systems where blocks with multiple sheaves are needed the number of blocks has to be determined. This is done for a given
load that needs to be lifted, by calculating the number of parts of line as follows:
L = load to be lifted in tons
P = single line pull in tons
R = ratio
3
L
R=
P
4
5
6
7
8
9
10
11
L = 16 tons
number of
parts
of line
1
2
3
4
5
6
7
8
9
10
11
12
bronze
bushed
sheaves
0.96
1.87
2.75
3.59
4.39
5.16
5.90
6.60
7.27
7.91
8.52
9.11
roller
bearing
sheaves
0.98
1.98
2.88
3.81
4.71
5.60
6.47
7.32
8.16
8.98
9.79
10.6
Table 2
Example:
L = 16 tons
P = 3 tons
How many parts of line are needed?
L
16
12
R=
13
Refer to ratio 5.3 in table 2 or the next larger number nearest to it, and then check the column under the header “number of parts of line”
For blocks with roller bearing sheaves this results in 6 parts of line that should be used to lift a 16 tons load with a line pull of 3 tons.
=
P
14
15
16
124
= 5.3
3
Blocks
Green Pin® Snatch blocks
type 601S, with Green Pin Shackle
•
•
•
•
•
P-6951
Material
Safety factor
Finish
Certification
Note
working
load
limit
tons
2
4
4
8
12
15
4
8
12
15
8
12
15
8
12
15
8
12
15
8
12
15
8
12
15
:
:
:
:
:
diameter
wire
rope
mm
7-9
10-12
12-14
20-22
20-22
24-26
10-12
20-22
20-22
24-26
20-22
20-22
24-26
20-22
20-22
24-26
20-22
20-22
24-26
20-22
20-22
24-26
20-22
20-22
24-26
carbon steel, fitted with conical roller bearings
MBL equals 4 x WLL
painted
Working Load Limit is on the headfitting
diameter
outside
sheave
a
mm
75
115
152
152
152
152
203
203
203
203
254
254
254
305
305
305
357
357
357
406
406
406
457
457
457
length
width
width
outside
weight
per pce
b
mm
293
363
417
477
555
585
478
526
580
646
582
680
705
612
745
771
662
770
798
712
820
848
762
878
898
c
mm
79
107
107
124
154
170
107
124
154
170
124
154
170
124
154
170
124
154
170
124
154
170
124
154
170
d
mm
82
120
160
160
160
160
210
210
210
210
260
260
260
310
310
310
360
360
360
410
410
410
460
460
460
kg
3.8
6.1
9.5
14.6
25
30
12
16
32
35
18
39
43
27
53
55
31
60
63
35
67
70
42
75
78
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
125
Blocks
Snatch blocks
type 601H, with hook
•
•
•
•
•
P-6952
1
2
3
4
5
6
7
Material
Safety factor
Finish
Certification
Note
:
:
:
:
:
working
load
limit
diameter
wire
rope
tons
2
4
4
8
12
15
4
8
12
15
8
12
15
8
12
15
8
12
15
8
12
15
8
10
15
mm
7-9
10 - 12
12 - 14
20 - 22
20 - 22
24 - 26
10 - 12
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
MBL equals 4 x WLL
painted
diameter
outside
sheave
a
mm
75
115
152
152
152
152
203
203
203
203
254
254
254
305
305
305
357
357
357
406
406
406
457
457
457
length
thickness
width
outside
weight
per pce
b
mm
292
343
384
445
572
587
435
495
622
638
546
673
689
597
724
740
648
775
791
699
825
841
749
876
892
c
mm
57
83
83
108
127
127
83
108
127
127
108
127
127
108
127
127
108
127
127
108
127
127
108
127
127
d
mm
82
120
160
160
160
160
210
210
210
210
260
260
260
310
310
310
360
360
360
410
410
410
460
460
460
kg
4
6.1
13.8
12.5
23
23
8
15
25
26
19
28
28
23
31
31
31
33
33
36
36
36
40
42
43
Snatch blocks
type 601T
8
•
•
•
•
•
9
10
Material
Safety factor
Finish
Certification
Note
:
:
:
:
:
MBL equals 4 x WLL
painted
P-6953
11
12
13
14
15
16
126
working
load
limit
diameter
wire
rope
tons
4
8
8
8
mm
10 - 12
20 - 22
20 - 22
20 - 22
diameter
outside
sheave
a
mm
115
152
203
254
length
thickness
width
outside
weight
per pce
b
mm
213
305
357
406
c
mm
83
108
108
108
d
mm
120
160
210
260
kg
4
9
12
16
Blocks
Galvanized malleable iron blocks
with eye, one sheave, for use with wire or fibre rope
•
•
•
•
•
G-6917
Material
Safety factor
Finish
Certification
Note
working diameter
load
rope
limit
tons
0.4
0.8
1
2
2.2
2.6
3
3.6
mm
12
16
18
24
28
30
32
34
:
:
:
:
:
galvanized malleable iron
MBL equals 4 x WLL
length
length
a
mm
164
232
270
340
350
390
420
460
b
mm
118
158
178
233
246
280
314
350
diameter thickness
c
mm
45
62
82
98
111
136
159
174
d
mm
39
45
49
60
64
68
75
75
width
inside
length
inside
weight
per pce
e
mm
14
18
24
30
30
30
44
44
f
mm
25
37
52
59
59
59
70
70
kg
0.7
1.4
1.8
3.7
4.9
7.2
10.8
12.6
1
2
3
4
5
6
7
with hook, one sheave, for use with wire or fibre rope
•
•
•
•
•
Material
Safety factor
Finish
Certification
Note
:
:
:
:
:
8
MBL equals 4 x WLL
9
10
G-6918
working
load
limit
diameter
rope
tons
0.4
0.8
1
2
2.2
2.4
3
3.6
mm
12
16
18
24
28
30
32
34
length
length
a
mm
203
262
278
346
388
415
450
492
b
mm
118
158
173
233
246
280
314
350
diameter thickness
c
mm
45
62
82
98
111
136
159
174
d
mm
39
45
49
60
64
68
75
75
width
inside
weight
per pce
e
mm
24
28
28
30
30
30
48
48
kg
0.9
1.5
2
3.8
5.1
7.7
11.4
13.5
11
12
13
14
15
16
127
Blocks
with eye, two sheaves, for use with wire or fibre rope
•
•
•
•
•
G-6922
Material
Safety factor
Finish
Certification
Note
working diameter
load
rope
limit
tons
0.4
0.9
1.1
2
2.3
2.6
3
3.6
1
mm
12
16
18
24
28
30
32
34
:
:
:
:
:
MBL equals 4 x WLL
length
length
a
mm
164
232
270
340
350
390
420
460
b
mm
118
158
175
233
246
280
314
350
diameter thickness
c
mm
45
62
82
98
111
136
159
174
d
mm
62
70
74
102
112
119
130
130
width
inside
length
inside
weight
per pce
e
mm
14
18
24
30
30
30
44
44
f
mm
25
37
52
59
59
59
70
70
kg
1.2
2.1
3.1
6.0
7.4
9.0
16.2
18.3
2
3
4
5
6
7
with hook, two sheaves, for use with wire or fibre rope
8
•
•
•
•
•
9
10
Material
Safety factor
Finish
Certification
Note
:
:
:
:
:
MBL equals 4 x WLL
G-6923
11
12
13
14
15
16
128
working
load
limit
diameter
rope
tons
0.4
0.9
1.1
2
2.3
2.6
3.6
3
mm
12
16
18
24
28
30
34
32
length
length
a
mm
203
262
278
346
388
415
492
450
b
mm
118
158
175
233
246
280
350
314
diameter thickness
c
mm
45
62
82
98
111
136
174
159
d
mm
62
70
74
102
112
119
130
130
width
inside
weight
per pce
e
mm
24
28
28
30
30
30
48
48
kg
1.3
2.3
3.3
6.2
7.6
11.3
16.8
19.3
Blocks
with eye, three sheaves, for use with wire or fibre rope
•
•
•
•
•
G-6927
Material
Safety factor
Finish
Certification
Note
working diameter
load
rope
limit
tons
0.4
0.8
1
2
2.6
3.6
mm
12
16
18
24
28
30
:
:
:
:
:
MBL equals 4 x WLL
length
length
a
mm
170
229
287
342
392
485
b
mm
120
154
190
235
284
350
diameter thickness
c
mm
45
62
82
98
136
174
d
mm
83
90
103
133
155
166
width
inside
length
inside
weight
per pce
e
mm
14
18
24
30
30
44
f
mm
25
37
52
59
59
70
kg
1.5
2.6
4.1
7.8
14.5
25
1
2
3
4
5
6
7
with hook, three sheaves, for use with wire or fibre rope
•
•
•
•
•
Material
Safety factor
Finish
Certification
Note
:
:
:
:
:
MBL equals 4 x WLL
8
9
10
G-6928
working
load
limit
diameter
rope
tons
0.4
0.8
1
2
2.6
3.6
mm
12
16
18
24
28
30
length
length
a
mm
205
259
294
348
397
510
b
mm
120
154
190
235
284
350
diameter thickness
c
mm
45
62
82
98
136
174
d
mm
83
90
103
133
155
166
width
inside
weight
per pce
e
mm
24
28
28
30
30
48
kg
1.6
2.7
4.3
8.1
14.7
26.2
11
12
13
14
15
16
129
Blocks
Galvanized malleable iron snatch blocks
with eye, one sheave, for use with fibre rope
•
•
•
•
•
E-6943
Material
Safety factor
Finish
Certification
Note
working diameter
load
rope
limit
tons
0.8
1
1.6
2.2
mm
16
18
20
24
:
:
:
:
:
MBL equals 5 x WLL
electro-galvanized
length
length
a
mm
219
276
302
378
b
mm
102
127
152
203
diameter thickness
c
mm
54
63
82
127
d
mm
38
38
38
51
width
inside
length
inside
weight
per pce
e
mm
19
25
25
32
f
mm
35
51
51
57
kg
1.5
1.8
3.5
6
1
2
3
4
5
6
7
Galvanized malleable iron snatch blocks
with hook, one sheave, for use with fibre rope
8
•
•
•
•
•
9
10
Material
Safety factor
Finish
Certification
Note
:
:
:
:
:
MBL equals 5 x WLL
electro-galvanized
E-6944
11
12
13
14
15
16
130
working
load
limit
diameter
rope
tons
0.8
1
1.6
2.2
mm
16
18
20
24
length
length
a
mm
238
295
321
391
b
mm
102
127
152
203
diameter thickness
c
mm
54
63
82
127
d
mm
38
38
38
51
width
inside
weight
per pce
e
mm
27
27
29
36
kg
1.5
1.8
3.5
6
Blocks
American pattern cargo blocks
with eye, one sheave
• Material
•
•
•
•
P-6916
Safety factor
Finish
Certification
Note
working
load
limit
diameter
wire
rope
tons
4
6
6
10
10
20
32
40
mm
10-13
20-22
20-22
20-22
24-26
32-35
26-28
26-28
: carbon steel
sheave with taper roller bearing
: painted
: Working Load Limit is on the headfitting
length
a
mm
437
512
610
750
840
1040
1018
1095
diameter thickness
b
mm
156
200
260
305
355
406
430
460
c
mm
82
104
124
165
165
180
192
210
width
inside
length
inside
weight
per pce
d
mm
35
35
40
54
54
73
73
73
e
mm
75
75
85
125
125
170
170
170
kg
11
20
27
40
55
100
125
150
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
131
General Hardware
Applications
General hardware items, such as carabine hooks, quick links and s-hooks, are suitable for many different applications in various market segments like agriculture, industry, transportation, etc.
Range
Van Beest offers a wide range of general hardware products such as:
Carabine hooks in four different types ranging from 4 up to 14 mm.
Two types of quick links ranging from 4 up to 16 mm.
Chain repair links from 3 up to 10 mm.
Spring pins from 2 up to 8 mm.
S-hooks from 3 up to 8 mm.
Linch pins from 4.5 up to 11 mm.
Design
General hardware items are typically designed for multiple purpose usage.
Finish
General hardware items are electro-galvanized.
Certification
All general hardware can be supplied with test certificates upon request.
Items should be inspected before use to ensure that:
• items are free from nicks, gouges and cracks;
• the item is not used for lifting, general hardware items are not suitable for lifting applications;
• never repair or reshape an item by welding, heating or bending as this may affect its performance.
15
132
standard type
• Material
• Finish
E-7200
: mild steel
diameter
length
width
width
inside
width
inside
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
c
mm
14
16
18
22
24
26
30
36
40
44
48
d
mm
5
7
7
9
11
11
12
14
16
20
20
e
mm
7
8
9
10
12
12
15
18
20
22
22
minimum
breaking
load
weight
per
100 pcs
kg
kg
0.6
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
100
120
180
300
330
460
600
680
800
860
General Hardware
Carabine hooks
1
2
3
4
5
6
7
Carabine hooks
with pressed thimble
• Material
• Finish
8
: mild steel
9
10
E-7210
diameter
length
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
diameter
inside
thimble
c
mm
4
5
6
7
10
12
13
13
15
17
17
width
d
mm
14
16
18
22
24
26
30
36
40
44
48
minimum
breaking
load
weight
per
100 pcs
kg
100
120
180
300
330
460
600
680
800
860
kg
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
50
11
12
13
14
15
16
133
General Hardware
Carabine hooks
with screw nut
• Material
• Finish
: mild steel
diameter
length
width
inside
width
inside
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
c
mm
4
5
6
7
10
12
13
13
15
17
17
d
mm
7
7
8
10
12
12
15
16
19
28
28
E-7220
1
2
minimum
breaking
load
weight
per
100 pcs
kg
100
120
180
300
330
460
600
680
800
860
kg
1.7
1.9
2.9
4.6
6.9
10.3
13.4
19
26.5
37
52
3
4
5
6
7
Carabine hooks
with pressed thimble and screw nut
8
• Material
• Finish
9
: mild steel
10
E-7230
11
12
13
14
15
16
134
diameter
length
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
diameter
inside
thimble
c
mm
4
5
6
7
9
10
11
12
13
15
17
minimum
breaking
load
weight
per
100 pcs
kg
100
120
180
300
330
460
600
680
800
860
kg
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
50
standard type
• Material
• Finish
: mild steel
E-7300
diameter
width
inside
length
inside
opening
a
mm
3.5
4
5
6
7
8
9
10
12
14
16
b
mm
10
11
13
14
16
17
17
20
23
26
29
c
mm
29
32
39
46
51
59
64
70
83
97
112
d
mm
5
5
6
7
8
10
11
12
14
17
20
minimum
breaking
load
weight
per
100 pcs
kg
240
300
540
750
1125
1500
2000
2400
3600
5000
6000
kg
0.9
1.3
2
3.3
5.3
7.5
10.3
13
25
35
50
General Hardware
Quick links
1
2
3
4
5
6
7
Quick links
with enlarged opening
• Material
• Finish
8
: mild steel
9
E-7310
10
diameter
width
inside
length
inside
opening
a
mm
4
5
6
7
8
9
10
12
14
16
b
mm
12
14
16
17
19
20
22
25
28
31
c
mm
45
52
58
65
73
79
88
102
114
129
d
mm
11
13
14
16
17
19
20
23
26
29
minimum
breaking
load
kg
800
1250
1750
2500
3250
4000
5000
6250
10000
12500
weight
per
100 pcs
kg
1.4
2.5
4.2
6.7
9.4
13.1
17.5
28.2
45.6
60.7
11
12
13
14
15
16
135
General Hardware
Chain repair links
commercial quality
• Material
• Finish
: mild steel
diameter
width
inside
length
inside
opening
a
mm
3
4
4.5
5
5.5
6
6.5
7
8
9
10
b
mm
6.5
8
9
9.5
10.5
10.5
11.5
13.5
15
16.5
17
c
mm
16.5
20
22
23
26
29
30
32
37
37.5
37.5
d
mm
4
5.5
6
6
6
7
8
8.5
9
9
9
E-7910
1
2
weight
per
100 pcs
kg
0.4
0.8
1.1
1.2
1.8
2.1
3.2
3.9
5.6
7.6
9.5
3
4
5
6
7
S-hooks
standard type
8
• Material
• Finish
9
: mild steel
10
E-7920
11
12
13
14
15
16
136
diameter
length
opening
a
mm
3
4
5
6
7
8
b
mm
25
35
45
55
65
75
c
mm
6
8
9
10
17
20
weight
per
100 pcs
kg
0.3
0.8
1.3
2.4
4.3
6.9
General Hardware
Spring pins
single type
• Material
• Finish
E-7930
: mild steel
diameter
length
diameter
diameter
a
mm
2
3
4
5
6
7
8
b
mm
50
60
60
85
105
105
110
c
mm
10
18
20
24
30
30
28
d
mm
9 - 14
10 - 16
16 - 20
20 - 28
28 - 40
28 - 45
30 - 45
weight
per
100 pcs
kg
0.3
0.9
1.6
3.3
6.2
8.3
10.5
1
2
3
4
5
6
7
Spring pins
double type
• Material
• Finish
8
: mild steel
9
10
E-7931
diameter
length
diameter
diameter
a
mm
2
3
4
5
6
7
8
b
mm
50
62
78
92
120
130
130
c
mm
10
16
23
26
30
30
30
d
mm
8 - 14
14 - 20
17 - 24
18 - 30
24 - 36
24 - 40
24 - 45
11
weight
per
100 pcs
12
kg
0.4
1.4
3
5.3
9.6
13.5
17.8
13
14
15
16
137
General Hardware
Linch pins
with round spring ring
• Material
• Finish
: mild steel
diameter
pin
diameter
spring ring
a
mm
4.5
6
7
8
9
10
11
b
mm
3.4
3.4
3.4
3.4
3.4
3.4
3.4
E-7940
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
138
width
inside
spring ring
c
mm
34
41
41
41
41
41
41
length
pin
d
mm
42
42
42
42
42
42
42
weight
per
100 pcs
kg
2
2.8
3
3.5
3.8
4.4
4.6
General Hardware
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
139
Stainless Steel Products
Applications
Specially in circumstances where corrosion can cause problems, the use of stainless steel products is recommended.
Range
Van Beest offers a wide range of stainless steel items like shackles, thimbles, wire rope clips, eye bolts, rigging
screws etc.
Upon special request other stainless steel items can be manufactured.
Design
Items supplied by Van Beest are all manufactured from stainless steel quality AISI 316.
All stainless steel items have an equivalent in a regular steel quality, we refer to the specific chapters for further
design details.
Finish
All stainless steel items are polished.
We refer to the relevant product chapters in this catalogue for details on use of a specific item.
In general, items should be inspected before use to ensure that:
- all markings are legible;
- the item is free from nicks, gouges and cracks;
- never repair or reshape an item by welding, heating or bending as this may affect the strength.
structure.
16
140
bow shackle with screw pin
• Material
• Safety factor
• Finish
: AISI 316
: polished
R-7825
working
load
limit
tons
0.12
0.15
0.3
0.4
0.6
1
1.5
2
3
3.5
4.5
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
a
mm
4
5
6
8
10
12
16
20
22
25
28
32
b
mm
4
5
6
8
10
12
16
20
22
25
28
32
c
mm
8
10
12
16
20
24
32
40
44
50
56
64
d
mm
8
10
12
16
20
24
32
40
44
50
56
64
e
mm
16
20
24
32
40
48
64
80
88
100
112
128
f
mm
12
15
18
24
30
36
48
60
66
75
98
112
weight
per
100 pcs
kg
1.2
1.8
2.8
6.4
15
22
55
97
146
211
285
326
Shackles
1
2
3
4
5
6
Shackles
7
dee shackle with screw pin
• Material
• Safety factor
• Finish
: AISI 316
: polished
8
9
R-7821
10
working
load
limit
tons
0.12
0.15
0.3
0.4
0.6
1
1.5
2
3
3.5
4.5
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
4
5
6
8
10
12
16
20
22
25
28
32
b
mm
4
5
6
8
10
12
16
20
22
25
28
32
c
mm
8
10
12
16
20
24
32
40
44
50
56
64
d
mm
8
10
12
16
20
24
32
40
44
50
56
64
e
mm
16
20
24
32
40
48
64
80
88
100
112
128
weight
per
100 pcs
kg
1.1
1.6
2.4
5.6
13
20
48
84
127
184
250
372
11
12
13
14
15
16
141
Shackles
long dee type
• Material
• Finish
: AISI 316
: polished
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
4
5
6
8
10
12
b
mm
4
5
6
8
10
12
c
mm
8
10
12
16
20
24
d
mm
8
10
12
16
20
24
e
mm
30
37
45
60
75
90
R-7829
weight
per
100 pcs
kg
1
2
4
9
20
32
1
2
3
4
5
6
7
Shackles
short twisted type
8
• Material
• Finish
9
: AISI 316
: polished
10
R-7822
11
12
13
14
15
16
142
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
5
6
8
10
12
b
mm
5
6
8
9.5
12
c
mm
10
12
16
19
24
d
mm
10
12
16
20
24
e
mm
36
42
56
60
72
weight
per
100 pcs
kg
2
4
9
11
32
heavy type
• Material
• Finish
R-7860
: AISI 316
: polished
width
groove
width
inside
a
mm
2
2.5
3
4
5
6
7
8
10
12
14
16
18
20
22
24
26
b
mm
9
9.5
10
11
13
16
18
20
26
28
34
37
42
45
50
58
66
length
inside
c
mm
15
15.7
16
17
20
25
28
32
40
45
56
62
65
78
88
96
105
length
thickness
d
mm
23
24
25
28
32
39
40
49
55
70
80
85
95
115
125
135
140
e
mm
1
1
1
1
1
1.2
1.2
1.4
1.9
2
2.2
2.5
2.5
3
3
4
4
weight
per
100 pcs
kg
0.2
0.2
0.4
0.5
0.6
1
1.2
1.8
2.9
4.6
7.3
9.7
16.5
21.3
22.3
40.5
49.7
Thimbles
1
2
3
4
5
6
7
Wire rope clips
• Material
length
R-7863
• Standard
• Finish
8
: Bridge
: AISI 316
Nuts
: AISI 316
U-bolt
: AISI 316
: polished
9
10
diameter diameter
wire
rope
a
mm
mm
3
4
5
5
6
5
8
6
10
8
13
10
16
12
19
12
22
14
length
bow
width
inside
length
thread
b
mm
20
24
28
34
42
55
63
75
85
c
mm
9
11
13
16
19
24
29
32
37
d
mm
12
13
15
19
22
30
33
38
44
base
base
base
e
mm
21
23
26
30
34
42
50
54
61
f
mm
10
11
12
14
18
23
26
29
33
g
mm
10
10
11
15
17
21
26
30
34
weight
per
100 pcs
kg
1.4
1.5
2.1
4.1
6.8
13
21
28
40
11
12
13
14
15
16
143
Open body rigging screws
Hook - Hook
• Material
• Finish
R-7837
1
: AISI 316
: polished
diameter length
length
thread
closed
open
position position
a
b
c
mm
mm
mm
M 5
120
175
M 6
184
270
M 8
200
280
M 10
234
323
M 12
260
343
M 16
322
438
M 20
382
514
length
body
length
length
d
mm
70
110
110
125
125
170
200
e
mm
60
92
100
117
130
161
191
f
mm
40
55
57
68
70
88
105
opening thickness weight
hook
per pce
g
mm
6
8
10.5
13
16
20
21
h
mm
13
15
15
11
13
17
21
kg
0.04
0.1
0.17
0.26
0.52
1.1
1.8
2
3
4
5
6
7
Hook - Eye
8
• Material
• Finish
9
10
: AISI 316
: polished
R-7838
11
diameter length
length
thread closed
open
position position
a
b
c
mm
mm
mm
12
M
M
M
M
M
M
M
13
14
15
16
144
5
6
8
10
12
16
20
110
172
184
222
241
311
358
165
258
264
311
324
427
490
length
length
length
length
d
mm
e
mm
f
mm
g
mm
70
110
110
125
125
170
200
55
77
85
106
117
144
170
55
80
84
105
111
150
167
40
55
57
68
70
88
105
opening thickness outside inside weight
hook
diameter diameter per pce
eye
eye
h
i
j
k
mm
mm
mm
mm
kg
6
8
10.5
13
16
20
21
13
15
15
11
13
17
21
16
20
22
31
35
47
52
7
9
10
14
16
22
24
0.04
0.11
0.2
0.28
0.43
1
1.6
Eye - Eye
• Material
• Finish
R-7839
: AISI 316
: polished
diameter length
length
thread
closed
open
position position
a
b
c
mm
mm
mm
M 5
110
165
M 6
160
246
M 8
168
248
M 10
210
300
M 12
222
305
M 16
300
416
M 20
334
466
length
body
length
length
d
mm
70
110
110
125
125
170
200
e
mm
55
80
84
105
110
143
165
f
mm
40
55
57
68
70
88
105
diameter diameter weight
eye
eye
per pce
outside inside
g
h
mm
mm
kg
16
7
0.04
20
9
0.11
22
10
0.2
31
14
0.28
35
16
0.43
47
22
1
52
24
1.6
1
2
3
4
5
6
7
Jaw - Jaw
8
• Material
• Finish
: AISI 316
: polished
9
R-7830
10
diameter
thread
length
open
length
closed
length
body
diameter
pin
a
mm
M 5
M 6
M 8
M10
M12
M14
M16
M20
b
mm
190
210
240
270
360
385
450
450
c
mm
125
155
180
220
255
270
320
355
d
mm
80
95
105
125
150
165
190
210
e
mm
5.2
6.2
8.7
9.7
12.7
12.7
16
19
width
jaw
inside
f
mm
6
7.5
10
12
14
14
16
20
weight
per
100 pcs
kg
6.5
8.1
13.9
25.3
57.3
64
94.2
145
11
12
13
14
15
16
145
Fork terminals
swage type
• Material
• Finish
R-7834
diameter
wire
rope
mm
3
4
5
6
7
8
9.5
10
12
1
: AISI 316
: polished
diameter
inside
diameter
outside
diameter
pin
length
length
inside
width
jaw
a
mm
3.3
4.3
5.3
6.6
7.5
8.3
10
10.5
12.5
b
mm
6.3
7.5
9
12.5
14.2
16
17
17.8
20
c
mm
5.2
6.2
8.7
9.7
12.6
14.6
16.5
16.5
19
d
mm
65
77
88
106
116
145
150
150
204
e
mm
32
40
57
63
70
85
87
89
105
f
mm
7.5
10
12
14
14.5
16
17
17
25
weight
per
100 pcs
kg
2.3
4.9
7.2
13.9
18.1
21.6
48
52
67
2
3
4
5
6
7
Eye terminals
swage type
8
• Material
• Finish
9
10
: AISI 316
: polished
R-7835
11
wire
inside outside
rope
a
b
mm
mm
mm
3
3.2
6.3
4
4.2
7.5
5
5.2
9
12
13
14
15
16
146
length
inside
length
c
mm
36
39
50
d
mm
58
65
80
diameter diameter thickness weight
eye
eye
eye
per
inside outside
100 pcs
e
f
g
mm
mm
mm
kg
6.5
13
5
1.3
8
18
6
2.3
10
22
7
3.9
swage type
• Material
• Finish
diameter
wire
rope
R-7836
mm
3
4
5
6
8
10
: AISI 316
: polished
thread
diameter
inside
diameter
outside
length
length
inside
a
mm
M 6
M 8
M 10
M 12
M 16
M 20
b
mm
3.3
4.3
5.3
6.3
8.3
10.3
c
mm
6.3
7.5
9
12
16
18
d
mm
100
117
130
162
195
230
e
mm
39
45
51
64
76
89
weight
per
100 pcs
kg
2.7
5.4
7.8
15.1
23.2
59
Threaded terminals
1
2
3
4
5
6
7
Swivels
Eye - Eye
• Material
• Finish
8
: AISI 316
: polished
9
10
R-7877
diameter
length
length
inside
width
outside
width
inside
a
mm
5
6
8
10
13
16
19
b
mm
60
65
90
115
154
188
229
c
mm
13
15
22
27
35
45
50
d
mm
23
26
35
44
57
71
84
e
mm
13
15
20
24
32
39
41
weight
per
100 pcs
kg
3.4
5.1
13.1
26
58
105
220
11
12
13
14
15
16
147
Eye bolts
• Material
• Standard
• Finish
: AISI 316
: polished
R-7840
diameter
thread
diameter
base
a
mm
M 6
M 8
M 10
M 12
M 16
b
mm
20
20
25
30
35
diameter
eye
outside
c
mm
36
36
45
54
63
diameter
eye
inside
d
mm
20
20
25
30
35
length
thread
thickness
base
height
e
mm
13
13
17
20.5
27
f
mm
6
6
8
10
12
g
mm
36
36
45
53
62
weight
per
100 pcs
kg
3
6
10.3
17.7
28
1
2
3
4
5
Eye nuts
6
7
• Material
• Standard
• Finish
8
: AISI 316
: polished
R-7842
9
10
11
12
13
14
15
16
148
diameter
thread
diameter
base
a
mm
M 6
M 8
M 10
M 12
M 16
b
mm
20
20
25
30
35
diameter
eye
outside
c
mm
36
36
45
54
63
diameter
eye
inside
d
mm
20
20
25
30
35
thickness
base
height
e
mm
8.5
8.5
10
11
13
f
mm
36
36
45
53
62
weight
per
100 pcs
kg
4.2
5.2
9.4
16
24
standard type
• Material
• Finish
R-7872
: AISI 316
: polished
diameter
length
width
inside
width
inside
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
c
mm
5
7
7
9
11
11
12
14
16
20
20
d
mm
7
8
9
10
12
12
15
18
20
22
22
minimum
breaking
load
weight
per
100 pcs
kg
70
110
132
198
330
363
506
660
748
880
946
kg
0.6
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
Carabine hooks
1
2
3
4
5
Carabine hooks
6
with pressed thimble
• Material
• Finish
7
: AISI 316
: polished
8
9
diameter
length
R-7875
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
diameter
inside
thimble
c
mm
5
5
5
7
10
10
13
13
15
17
17
width
d
mm
14
16
18
22
24
26
30
36
40
44
48
minimum
breaking
load
weight
per
100 pcs
kg
70
110
132
198
330
363
506
660
748
880
946
kg
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
50
10
11
12
13
14
15
16
149
Carabine hooks
with screw nut
• Material
• Finish
R-7876
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
150
: AISI 316
: polished
diameter
length
width
inside
width
inside
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
c
mm
5
7
7
9
11
11
12
14
16
20
20
d
mm
7
8
9
10
12
12
15
18
20
22
22
minimum
breaking
load
weight
per
100 pcs
kg
70
110
132
198
330
363
506
660
748
880
946
kg
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
50
standard type
• Material
• Finish
: AISI 316
: polished
R-7873
diameter
width
inside
length
inside
opening
a
mm
3.5
4
5
6
7
8
9
10
12
b
mm
10
12
13
14
16
17
17
20
23
c
mm
29
32
39
46
51
59
64
70
83
d
mm
5
5.5
6.5
7.5
8.5
10.5
11.5
12.5
14.5
minimum
breaking
load
weight
per
100 pcs
kg
155
450
585
790
1085
1380
1790
2085
2265
kg
0.9
1.3
2
3.3
5.3
7.5
10.3
13
22.5
Quick links
1
2
3
4
5
6
Quick links
with enlarged opening
7
• Material
• Finish
8
: AISI 316
: polished
9
10
R-7874
diameter
width
inside
length
inside
opening
a
mm
3.5
5
6
8
10
12
14
b
mm
10
14
16
18
20
23
27
c
mm
30
39
46
59
70
83
97
d
mm
10
14
16
18
20
23
26
minimum
breaking
load
weight
per
100 pcs
kg
155
585
790
1380
2085
2265
2540
kg
1.2
2.7
4.4
10.1
17.6
30.4
41.5
11
12
13
14
15
16
151
Short link chain
• Material
• Standard
R-7880
diameter
a
mm
3
4
5
6
8
10
: AISI 316
length
inside
b
mm
16
16
18.5
18.5
24
28
width
outside
c
mm
11
14
17
20
26
34
weight
per m
width
outside
c
mm
12
16
20
24
28
32
40
weight
per m
kg
0.17
0.32
0.5
0.75
1.35
2.25
1
2
3
4
5
Long link chain
6
• Material
• Standard
7
: AISI 316
8
9
diameter
10
R-7890
11
12
13
14
15
16
152
a
mm
3
4
5
6
7
8
10
length
inside
b
mm
26
32
36
42
48
54
66
kg
0.14
0.27
0.43
0.63
0.86
1.1
1.75
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
153
Index by Chapter
154
1
Shackles
G-4161
Green Pin® Standard Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
G-4163
Green Pin® Standard Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
G-4151
Green Pin® Standard Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
G-4153
Green Pin® Standard Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
P-6036
Green Pin® Heavy Duty Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
G-6038
Green Pin® Heavy Duty Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
P-6033
Green Pin® Sling Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
G-5263
Green Pin® Super Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
G-5163
Green Pin® Polar Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
P-6031
Green Pin® Heavy Duty Polar Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
G-4263
Green Pin® Wide Mouth Towing Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
G-4164
Green Pin® Trawling Shackles - bow shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
G-4154
Green Pin® Trawling Shackles - dee shackles with square headed screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
G-4169
Green Pin® Sunken Hole Shackles - bow shackles with square sunken hole screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
P-4170
Key for Green Pin® Sunken Hole Shackles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
G-4159
Green Pin® Sunken Hole Shackles - dee shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
S-1165
Mooring Shackles - bow shackles with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
S-3557
Crown Shackles - dee shackles with round pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
S-3559
S-3461
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
G-3461
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . 32
S-3466
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
G-3466
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . 32
S-3351
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
G-3351
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - hot dipped galvanized. . . . . . . . . . . . . . . . . . . . . 33
S-3352
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . 33
G-3352
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - hot dipped galvanized . . . . . . . . . . . . . . 33
S-3356
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
G-3356
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . 34
G-3161
Yellow Pin Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
G-3163
Yellow Pin Shackles - bow shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
G-3151
Yellow Pin Shackles - dee shackles with screw collar pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
G-3153
Yellow Pin Shackles - dee shackles with safety pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
S-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . 38
E-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 38
G-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 38
S-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . 39
E-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 39
G-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - hot dipped galvanized. . . . . . . . . . . . . . . . 39
S-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . 40
E-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - electro-galvanized. . . . . . . . . . . . . . . . . . . . 40
G-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 40
S-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . 41
E-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 41
G-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 41
P-3780
Fishing Shackles - bow shackles with square head screw pin and one flattened eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
P-3790
Fishing Shackles - bow shackles with square sunken hole screw pin and one flattened eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
P-3785
Fishing Shackles - dee shackles with square head screw pin and one flattened eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
P-3795
Fishing Shackles - dee shackles with square sunken hole screw pin and one flattened eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
P-3764
Fishing Shackles - bow shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
P-3754
Fishing Shackles - dee shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
S-3770
S-1161
Commercial Shackles - bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
E-1161
Commercial Shackles - bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
S-1164
Commercial Shackles - bow shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
S-1162
Commercial Shackles - bow shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
E-1162
Commercial Shackles - bow shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
S-1151
Commercial Shackles - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
E-1151
Commercial Shackles - dee shackles with screw collar pin - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
S-1154
Commercial Shackles - dee shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
S-1152
Commercial Shackles - dee shackles with counter sunk screw pin - self coloured. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
E-1152
Commercial Shackles - dee shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
S-1170
Commercial Shackles - danlino V shackles with square head screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Thimbles
E-6110
Thimbles - standard commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
E-6120
Thimbles - heavy duty stub-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
E-6131
Thimbles - generally to DIN 6899 (B) - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
G-6131
Thimbles - generally to DIN 6899 (B) - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
G-6132
Thimbles - generally to DIN 6899 (C). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
G-6133
Thimbles - generally to DIN 83311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
E-6135
Thimbles - generally to DIN 3090 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
G-6135
Thimbles - generally to DIN 3090 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
S-6134
Thimbles - generally to DIN 3091 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
G-6170
Thimbles - generally to EN 13411-1 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
G-6142
Thimbles - generally to US Federal Specification FF-T-276b type III - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
G-6160
Thimbles - towing type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
G-6151
Thimbles - pennant line type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
E-6180
Thimbles - for rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
P-6190
Thimbles - tubular type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
E-6143
Round thimbles - ordinary type - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
G-6143
Round thimbles - ordinary type - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
G-6144
Round thimbles - container type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
3
Wire Rope Clips
G-6240
Green Pin® wire rope clips - generally to EN 13411-5 Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
E-6260
Wire rope clips - generally to EN 13411-5 Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
E-6220
Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
E-6280
Wire rope clips - generally to NF 00026. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
4
Sleeves
A-6550
Aluminium sleeves - for wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
S-6500
Prescon sleeves - with colour code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
5
Sockets
P-6411
Green Pin® sockets - closed spelter socket - painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
G-6411
Green Pin® sockets - closed spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
P-6412
Green Pin® sockets - open spelter socket - painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
G-6412
Green Pin® sockets - open spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
P-6413
Green Pin® sockets - open wedge socket - painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
G-6413
Green Pin® sockets - open wedge socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
G-6416
Gold NoseTM sockets - closed spelter socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
S-6414
Swage sockets - open type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
S-6415
Swage sockets - closed type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
6
Turnbuckles
G-6313
Green Pin® turnbuckles Jaw - Jaw - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
G-6311
Green Pin® turnbuckles Eye - Eye - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
G-6312
Green Pin® turnbuckles Hook - Hook - generally to ASTM F1145-92. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
G-6315
Green Pin® turnbuckles Eye - Jaw - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
G-6314
Green Pin® turnbuckles Eye - Hook - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
E-6351
Rigging screws Eye - Eye - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
E-6352
Rigging screws Hook - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
E-6354
Rigging screws Eye - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
E-6353
Rigging screws Jaw - Jaw - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
E-6355
Rigging screws with Welding Ends - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
G-6343
Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
G-6340
Closed body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
G-6345
Closed body rigging screws Eye - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
S-6330
Turnbuckles (hamburgers) - for deck lashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
7
Links
P-6860Y
Green Pin® connecting links - for connecting grade 80 chain-slings - yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
P-6860R
Green Pin® connecting links - for connecting grade 80 chain-slings - red. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
P-6835
Green Pin® master links - with flat part. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
P-6855
Green Pin® master link assemblies - with flat part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
8
Swivels
G-7713
Green Pin® swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
G-7723
Green Pin® swivels Jaw - Eye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
P-7710
Thrust bearing swivels Jaw - Jaw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
P-7720
Thrust bearing swivels Jaw - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
P-7730
Thrust bearing swivels Eye - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
P-7740
Thrust bearing swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
P-7750
Thrust bearing swivels Hook - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
P-7760
Thrust bearing swivels Hook - Eye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
155
Index by Chapter
2
Index by Chapter
9
156
Hooks
P-6714C
Green Pin® large eye hooks, grade 4 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
P-6714A
P-6703C
Green Pin® swivel hooks, grade 4 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
P-6703A
P-6731
Green Pin® pipe line hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
P-6706A
Green Pin® sliding choker hooks - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
P-6760
Viking hooks - with tapered opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
P-6768
Fishcon hooks - with tapered opening. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
P-6765
G-hooks - with tapered opening. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
10
Eye Bolts/Eye Nuts
S-8140
Green Pin® eye bolts - generally to DIN 580 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
E-8140
Green Pin® eye bolts - generally to DIN 580 - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
S-8142
Green Pin® eye nuts - generally to DIN 582 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
E-8142
Green Pin® eye nuts - generally to DIN 582 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
S-8180
Green Pin® eye bolts C15E - generally to DIN 580 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
E-8180
Green Pin® eye bolts C15E - generally to DIN 580 - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
S-8182
Green Pin® eye nuts C15E - generally to DIN 582 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
E-8182
Green Pin® eye nuts C15E - generally to DIN 582 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
11
Loadbinders
P-7170
Green Pin® ratchet type loadbinders - with hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
P-7190
Green Pin® ratchet type loadbinders - without hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
P-7130R
Green Pin® ratchet type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-7130G
Green Pin® ratchet type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-7150R
Green Pin® ratchet type loadbinders - without hooks - red. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-7150G
Green Pin® ratchet type loadbinders - without hooks - green. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-7110R
Green Pin® lever type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-7110G
Green Pin® lever type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-7120
Green Pin® spring type loadbinders - with hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
12
Chain
S-7660
Short link chain - generally to DIN 766, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
E-7661
Short link chain - generally to DIN 766, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
G-7662
Short link chain - generally to DIN 766, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
S-7630
Long link chain - generally to DIN 763, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
E-7631
Long link chain - generally to DIN 763, commercial quality - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
G-7632
Long link chain - generally to DIN 763, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
13
P-6615
Green Pin® plate lifting clamp, type E - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
P-6616
Green Pin® plate lifting clamp, type ES - for lifting and vertical transportation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
P-6625
Green Pin® plate lifting clamp, type EU - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
P-6626
Green Pin® plate lifting clamp, type EUS - for lifting and transportation in all directions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
P-6635
Green Pin® plate lifting clamp, type EH - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
P-6636
Green Pin® plate lifting clamp, type EHS - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
P-6685
Green Pin® lifting clamp, type ESV - for lifting and transportation of steel beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
P-6651
Green Pin® plate lifting clamp spare part - lifting eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
P-6652
Green Pin® plate lifting clamp spare part - lock lever assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
S-6653
Green Pin® plate lifting clamp spare part - lock spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
P-6654
Green Pin® plate lifting clamp spare part - cam assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
S-6655
Green Pin® plate lifting clamp spare part - cam pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
S-6656
Green Pin® plate lifting clamp spare part - pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
S-6657
Green Pin® plate lifting clamp spare part - eye pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
P-6658
Green Pin® plate lifting clamp spare part - universal eye component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
14
Blocks
P-6951
Green Pin® Snatch blocks - type 601S, with Green Pin® Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
P-6952
Snatch blocks - type 601H, with hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
P-6953
Snatch blocks - type 601T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
G-6917
Galvanized malleable iron blocks - with eye, one sheave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
G-6918
Galvanized malleable iron blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
G-6922
Galvanized malleable iron blocks - with eye, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
G-6923
Galvanized malleable iron blocks - with hook, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
G-6927
Galvanized malleable iron blocks - with eye, three sheaves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
G-6928
Galvanized malleable iron blocks - with hook, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
E-6943
Galvanized malleable iron snatch blocks - with eye, one sheave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
E-6944
Galvanized malleable iron snatch blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
P-6916
American pattern cargo blocks - with eye, one sheave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
General Hardware
E-7200
Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
E-7210
Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
E-7220
Carabine hooks - with screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
E-7230
Carabine hooks - with pressed thimble and screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
E-7300
Quick links - standard type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
E-7310
Quick links - with enlarged opening. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
E-7910
Chain repair links - commercial quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
E-7920
S-hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
E-7930
Spring pins - single type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
E-7931
Spring pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
E-7940
Linch pins - with round spring ring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
16
R-7825
Shackles - bow shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
R-7821
Shackles - dee shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
R-7829
Shackles - long dee type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
R-7822
Shackles - short twisted type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
R-7860
Thimbles - heavy type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
R-7863
Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
R-7837
Open body rigging screws Hook - Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
R-7838
Open body rigging screws Hook - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
R-7839
Open body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
R-7830
Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
R-7834
Fork terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
R-7835
Eye terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
R-7836
Threaded terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
R-7877
Swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
R-7840
Eye bolts - generally to DIN 580. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
R-7842
Eye nuts - generally to DIN 582 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
R-7872
R-7875
R-7876
R-7873
R-7874
R-7880
Short link chain - generally to DIN 766 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
R-7890
Long link chain - generally to DIN 763 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
157
Index by Chapter
15
Index by Productname
A
Aluminium sleeves - for wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6550 . . . . . . . . . . . . . . . . . . . . 67
American pattern cargo blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6916 . . . . . . . . . . . . . . . . . . . 131
C
Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7200 . . . . . . . . . . . . . . . . . . . 133
Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7872 . . . . . . . . . . . . . . . . . . . 149
Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7210 . . . . . . . . . . . . . . . . . . . 133
Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7875 . . . . . . . . . . . . . . . . . . . 149
Carabine hooks - with pressed thimble and screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7230 . . . . . . . . . . . . . . . . . . . 134
Carabine hooks - with screw nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7220 . . . . . . . . . . . . . . . . . . . 134
Carabine hooks - with screw nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7876 . . . . . . . . . . . . . . . . . . . 150
Chain repair links - commercial quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7910 . . . . . . . . . . . . . . . . . . . 136
Closed body rigging screws Eye - Eye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6340 . . . . . . . . . . . . . . . . . . . . 88
Closed body rigging screws Eye - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6345 . . . . . . . . . . . . . . . . . . . . 88
Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6343 . . . . . . . . . . . . . . . . . . . . 87
Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7830 . . . . . . . . . . . . . . . . . . . 145
Commercial Shackles - bow shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . E-1162 . . . . . . . . . . . . . . . . . . . . 47
Commercial Shackles - bow shackles with counter sunk screw pin - self coloured. . . . . . . . . . . . . . . . . . . . . . . . S-1162 . . . . . . . . . . . . . . . . . . . . 47
Commercial Shackles - bow shackles with screw collar pin - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . E-1161 . . . . . . . . . . . . . . . . . . . . 46
Commercial Shackles - bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1161 . . . . . . . . . . . . . . . . . . . . 46
Commercial Shackles - bow shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1164 . . . . . . . . . . . . . . . . . . . . 46
Commercial Shackles - danlino V shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1170 . . . . . . . . . . . . . . . . . . . . 49
Commercial Shackles - dee shackles with counter sunk screw pin - electro-galvanized. . . . . . . . . . . . . . . . . . . . E-1152 . . . . . . . . . . . . . . . . . . . . 48
Commercial Shackles - dee shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . S-1152 . . . . . . . . . . . . . . . . . . . . 48
Commercial Shackles - dee shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . E-1151 . . . . . . . . . . . . . . . . . . . . 47
Commercial Shackles - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1151 . . . . . . . . . . . . . . . . . . . . 47
Commercial Shackles - dee shackles with square head screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1154 . . . . . . . . . . . . . . . . . . . . 48
Crown Shackles - dee shackles with round pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-3557 . . . . . . . . . . . . . . . . . . . . 30
Crown Shackles - dee shackles with round pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-3559 . . . . . . . . . . . . . . . . . . . . 31
E
Eye bolts - generally to DIN 580 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7840 . . . . . . . . . . . . . . . . . . . 148
Eye nuts - generally to DIN 582 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7842 . . . . . . . . . . . . . . . . . . . 148
Eye terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7835 . . . . . . . . . . . . . . . . . . . 146
F
Fishcon hooks - with tapered opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6768 . . . . . . . . . . . . . . . . . . . 104
Fishing Shackles - bow shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-3764 . . . . . . . . . . . . . . . . . . . . 44
Fishing Shackles - bow shackles with square head screw pin and one flattened eye . . . . . . . . . . . . . . . . . . . . . . P-3780 . . . . . . . . . . . . . . . . . . . . 42
Fishing Shackles - bow shackles with square sunken hole screw pin and one flattened eye . . . . . . . . . . . . . . . . P-3790 . . . . . . . . . . . . . . . . . . . . 42
Fishing Shackles - dee shackles with square head screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-3754 . . . . . . . . . . . . . . . . . . . . 44
Fishing Shackles - dee shackles with square head screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-3770 . . . . . . . . . . . . . . . . . . . . 45
Fishing Shackles - dee shackles with square head screw pin and one flattened eye . . . . . . . . . . . . . . . . . . . . . . P-3785 . . . . . . . . . . . . . . . . . . . . 43
Fishing Shackles - dee shackles with square sunken hole screw pin and one flattened eye . . . . . . . . . . . . . . . . P-3795 . . . . . . . . . . . . . . . . . . . . 43
Fork terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7834 . . . . . . . . . . . . . . . . . . . 146
G
Galvanized malleable iron blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6917 . . . . . . . . . . . . . . . . . . . 127
Galvanized malleable iron blocks - with eye, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6927 . . . . . . . . . . . . . . . . . . . 129
Galvanized malleable iron blocks - with eye, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6922 . . . . . . . . . . . . . . . . . . . 128
Galvanized malleable iron blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6918 . . . . . . . . . . . . . . . . . . . 127
Galvanized malleable iron blocks - with hook, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6928 . . . . . . . . . . . . . . . . . . . 129
Galvanized malleable iron blocks - with hook, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6923 . . . . . . . . . . . . . . . . . . . 128
Galvanized malleable iron snatch blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6943 . . . . . . . . . . . . . . . . . . . 130
Galvanized malleable iron snatch blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6944 . . . . . . . . . . . . . . . . . . . 130
G-hooks - with tapered opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6765 . . . . . . . . . . . . . . . . . . . 105
Gold NoseTM sockets - closed spelter socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6416 . . . . . . . . . . . . . . . . . . . . 75
Green Pin® connecting links - for connecting grade 80 chain-slings - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6860R . . . . . . . . . . . . . . . . . . . 91
Green Pin® connecting links - for connecting grade 80 chain-slings - yellow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6860Y . . . . . . . . . . . . . . . . . . . 91
Green Pin® eye bolts - generally to DIN 580 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8140 . . . . . . . . . . . . . . . . . . . 107
Green Pin® eye bolts - generally to DIN 580 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-8140 . . . . . . . . . . . . . . . . . . . 107
Green Pin® eye bolts C15E - generally to DIN 580 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8180 . . . . . . . . . . . . . . . . . . . 108
Green Pin® eye bolts C15E - generally to DIN 580 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-8180 . . . . . . . . . . . . . . . . . . . 108
Green Pin® eye nuts - generally to DIN 582 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8142 . . . . . . . . . . . . . . . . . . . 107
Green Pin® eye nuts - generally to DIN 582 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-8142 . . . . . . . . . . . . . . . . . . . 107
Green Pin® eye nuts C15E - generally to DIN 582 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8182 . . . . . . . . . . . . . . . . . . . 108
Green Pin® eye nuts C15E - generally to DIN 582 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-8182 . . . . . . . . . . . . . . . . . . . 108
Green Pin® Heavy Duty Polar Shackles - bow shackles with safety bolt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6031 . . . . . . . . . . . . . . . . . . . . 23
Green Pin® Heavy Duty Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6036 . . . . . . . . . . . . . . . . . . . . 18
Green Pin® Heavy Duty Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6038 . . . . . . . . . . . . . . . . . . . 19
Green Pin® large eye hooks, grade 4 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6714C . . . . . . . . . . . . . . . . . . 101
Green Pin® large eye hooks, grade 8 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6714A . . . . . . . . . . . . . . . . . . 101
Green Pin® lever type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7110G . . . . . . . . . . . . . . . . . . 113
Green Pin® lever type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7110R . . . . . . . . . . . . . . . . . . 113
Green Pin® lifting clamp, type ESV - for lifting and transportation of steel beams . . . . . . . . . . . . . . . . . . . . . . . . . P-6685 . . . . . . . . . . . . . . . . . . . 121
158
Green Pin® master links - with flat part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6835 . . . . . . . . . . . . . . . . . . . . 92
Green Pin® pipe line hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6731 . . . . . . . . . . . . . . . . . . . 103
Green Pin® plate lifting clamp spare part - cam assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6654 . . . . . . . . . . . . . . . . . . . 121
Green Pin® plate lifting clamp spare part - cam pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6655 . . . . . . . . . . . . . . . . . . . 121
Green Pin® plate lifting clamp spare part - eye pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6657 . . . . . . . . . . . . . . . . . . . 121
Green Pin® plate lifting clamp spare part - lifting eye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6651 . . . . . . . . . . . . . . . . . . . 121
Green Pin® plate lifting clamp spare part - lock lever assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6652 . . . . . . . . . . . . . . . . . . . 121
Green Pin® plate lifting clamp spare part - lock spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6653 . . . . . . . . . . . . . . . . . . . 121
Green Pin® plate lifting clamp spare part - pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6656 . . . . . . . . . . . . . . . . . . . 121
Green Pin® plate lifting clamp spare part - universal eye component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6658 . . . . . . . . . . . . . . . . . . . 121
Green Pin® plate lifting clamp, type E - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6615 . . . . . . . . . . . . . . . . . . . 118
Green Pin® plate lifting clamp, type EH - for lifting and horizontal transportation. . . . . . . . . . . . . . . . . . . . . . . . . . P-6635 . . . . . . . . . . . . . . . . . . . 120
Green Pin® plate lifting clamp, type EHS - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . P-6636 . . . . . . . . . . . . . . . . . . . 120
Green Pin® plate lifting clamp, type ES - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6616 . . . . . . . . . . . . . . . . . . . 118
Green Pin® plate lifting clamp, type EU - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . . P-6625 . . . . . . . . . . . . . . . . . . . 119
Green Pin® plate lifting clamp, type EUS - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . P-6626 . . . . . . . . . . . . . . . . . . . 119
Green Pin® Polar Shackles - bow shackles with safety bolt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-5163
. . . . . . . . . . . . . . . . . . 22
Green Pin® ratchet type loadbinders - with hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7170 . . . . . . . . . . . . . . . . . . . 111
Green Pin® ratchet type loadbinders - with hooks - green. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7130G . . . . . . . . . . . . . . . . . . 112
Green Pin® ratchet type loadbinders - with hooks - red. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7130R . . . . . . . . . . . . . . . . . . 112
Green Pin® ratchet type loadbinders - without hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7190 . . . . . . . . . . . . . . . . . . . 111
Green Pin® ratchet type loadbinders - without hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7150G . . . . . . . . . . . . . . . . . . 112
Green Pin® ratchet type loadbinders - without hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7150R . . . . . . . . . . . . . . . . . . 112
Green Pin® sliding choker hooks - with safety latch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6706A . . . . . . . . . . . . . . . . . . 103
Green Pin® Sling Shackles - bow shackles with safety bolt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6033 . . . . . . . . . . . . . . . . . . . . 20
Green Pin® Snatch blocks - type 601S, with Green Pin® Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6951 . . . . . . . . . . . . . . . . . . . 125
Green Pin® sockets - closed spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6411 . . . . . . . . . . . . . . . . . . . . 73
Green Pin® sockets - closed spelter socket - painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6411 . . . . . . . . . . . . . . . . . . . . 73
Green Pin® sockets - open spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6412 . . . . . . . . . . . . . . . . . . . . 74
Green Pin® sockets - open spelter socket - painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6412 . . . . . . . . . . . . . . . . . . . . 74
Green Pin® sockets - open wedge socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6413 . . . . . . . . . . . . . . . . . . . . 75
Green Pin® sockets - open wedge socket - painted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6413 . . . . . . . . . . . . . . . . . . . . 75
Green Pin® spring type loadbinders - with hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7120 . . . . . . . . . . . . . . . . . . . 113
Green Pin® Standard Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4163 . . . . . . . . . . . . . . . . . . . 15
Green Pin® Standard Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4161
. . . . . . . . . . . . . . . . . . 14
Green Pin® Standard Shackles - dee shackles with safety bolt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4153 . . . . . . . . . . . . . . . . . . . 17
Green Pin® Standard Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4151 . . . . . . . . . . . . . . . . . . . 16
Green Pin® Sunken Hole Shackles - bow shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . G-4169
. . . . . . . . . . . . . . . . . . 28
Green Pin® Sunken Hole Shackles - dee shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . G-4159
. . . . . . . . . . . . . . . . . . 29
Green Pin® Super Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-5263 . . . . . . . . . . . . . . . . . . . . 21
Green Pin® swivel hooks, grade 4 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6703C . . . . . . . . . . . . . . . . . . 102
Green Pin® swivel hooks, grade 8 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6703A . . . . . . . . . . . . . . . . . . 102
Green Pin® swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-7713 . . . . . . . . . . . . . . . . . . . . 95
Green Pin® swivels Jaw - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-7723 . . . . . . . . . . . . . . . . . . . . 95
Green Pin® Trawling Shackles - bow shackles with square headed screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4164
. . . . . . . . . . . . . . . . . . 26
Green Pin® Trawling Shackles - dee shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4154
. . . . . . . . . . . . . . . . . . 27
Green Pin® turnbuckles Eye - Eye - generally to ASTM F1145-92. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6311 . . . . . . . . . . . . . . . . . . . . 81
Green Pin® turnbuckles Eye - Hook - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6314 . . . . . . . . . . . . . . . . . . . . 84
Green Pin® turnbuckles Eye - Jaw - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6315 . . . . . . . . . . . . . . . . . . . . 83
Green Pin® turnbuckles Hook - Hook - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6312 . . . . . . . . . . . . . . . . . . . . 82
Green Pin® turnbuckles Jaw - Jaw - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6313 . . . . . . . . . . . . . . . . . . . . 80
Green Pin® Wide Mouth Towing Shackles - bow shackles with safety bolt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4263 . . . . . . . . . . . . . . . . . . . . 24
Green Pin® wire rope clips - generally to EN 13411-5 Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6240 . . . . . . . . . . . . . . . . . . . . 63
K
Key for Green Pin® Sunken Hole Shackles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-4170 . . . . . . . . . . . . . . . . . . . . 28
L
Linch pins - with round spring ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7940 . . . . . . . . . . . . . . . . . . . 138
Long link chain - generally to DIN 763 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7890 . . . . . . . . . . . . . . . . . . . 152
Long link chain - generally to DIN 763, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . E-7631 . . . . . . . . . . . . . . . . . . . 115
Long link chain - generally to DIN 763, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . G-7632 . . . . . . . . . . . . . . . . . . . 115
Long link chain - generally to DIN 763, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-7630 . . . . . . . . . . . . . . . . . . . 115
M
Mooring Shackles - bow shackles with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1165 . . . . . . . . . . . . . . . . . . . . 30
O
Open body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7839 . . . . . . . . . . . . . . . . . . . 145
Open body rigging screws Hook - Eye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7838 . . . . . . . . . . . . . . . . . . . 144
Open body rigging screws Hook - Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7837 . . . . . . . . . . . . . . . . . . . 144
P
Prescon sleeves - with colour code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6500 . . . . . . . . . . . . . . . . . . . . 68
159
Green Pin® master link assemblies - with flat part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6855 . . . . . . . . . . . . . . . . . . . . 93
Q
Quick links - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7300 . . . . . . . . . . . . . . . . . . . 135
Quick links - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7873 . . . . . . . . . . . . . . . . . . . 151
Quick links - with enlarged opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7310 . . . . . . . . . . . . . . . . . . . 135
Quick links - with enlarged opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7874 . . . . . . . . . . . . . . . . . . . 151
R
Rigging screws Eye - Eye - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6351 . . . . . . . . . . . . . . . . . . . . 85
Rigging screws Eye - Hook - according to DIN 1480. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6354 . . . . . . . . . . . . . . . . . . . . 86
Rigging screws Hook - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6352 . . . . . . . . . . . . . . . . . . . . 85
Rigging screws Jaw - Jaw - according to DIN 1480. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6353 . . . . . . . . . . . . . . . . . . . . 86
Rigging screws with Welding Ends - according to DIN 1480. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6355 . . . . . . . . . . . . . . . . . . . . 87
Round thimbles - container type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6144 . . . . . . . . . . . . . . . . . . . . 59
Round thimbles - ordinary type - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6143 . . . . . . . . . . . . . . . . . . . . 59
Round thimbles - ordinary type - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6143 . . . . . . . . . . . . . . . . . . . . 59
S
Shackles - bow shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7825 . . . . . . . . . . . . . . . . . . . 141
Shackles - dee shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7821 . . . . . . . . . . . . . . . . . . . 141
Shackles - long dee type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7829 . . . . . . . . . . . . . . . . . . . 142
Shackles - short twisted type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7822 . . . . . . . . . . . . . . . . . . . 142
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - electro-galvanized . . . . . . . E-2755 . . . . . . . . . . . . . . . . . . . . 41
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - hot dipped galvanized . . . G-2755 . . . . . . . . . . . . . . . . . . . . 41
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - self coloured . . . . . . . . . . . S-2755 . . . . . . . . . . . . . . . . . . . . 41
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - electro-galvanized . . . . . . . E-2751 . . . . . . . . . . . . . . . . . . . . 40
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - hot dipped galvanized. . . . G-2751 . . . . . . . . . . . . . . . . . . . . 40
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - self coloured . . . . . . . . . . . S-2751 . . . . . . . . . . . . . . . . . . . . 40
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - electro-galvanized. . . . . . . E-2761 . . . . . . . . . . . . . . . . . . . . 38
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - hot dipped galvanized . . . G-2761 . . . . . . . . . . . . . . . . . . . . 38
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - self coloured . . . . . . . . . . . S-2761 . . . . . . . . . . . . . . . . . . . . 38
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - electro-galvanized . . . . . . E-2765 . . . . . . . . . . . . . . . . . . . . 39
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - hot dipped galvanized . . . G-2765 . . . . . . . . . . . . . . . . . . . . 39
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - self coloured. . . . . . . . . . . S-2765 . . . . . . . . . . . . . . . . . . . . 39
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - hot dipped galvanized . . . . . . . G-3461 . . . . . . . . . . . . . . . . . . . . 32
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . S-3461 . . . . . . . . . . . . . . . . . . . . 32
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . G-3466 . . . . . . . . . . . . . . . . . . . . 32
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - self coloured. . . . . . . . . . . . . . . . . . . . S-3466 . . . . . . . . . . . . . . . . . . . . 32
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . G-3351 . . . . . . . . . . . . . . . . . . . . 33
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - self coloured. . . . . . . . . . . . . . . . S-3351 . . . . . . . . . . . . . . . . . . . . 33
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - hot dipped galvanized. . G-3352 . . . . . . . . . . . . . . . . . . . . 33
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - self coloured . . . . . . . . . S-3352 . . . . . . . . . . . . . . . . . . . . 33
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . G-3356 . . . . . . . . . . . . . . . . . . . . 34
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . S-3356 . . . . . . . . . . . . . . . . . . . . 34
S-hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7920 . . . . . . . . . . . . . . . . . . . 136
Short link chain - generally to DIN 766 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7880 . . . . . . . . . . . . . . . . . . . 152
Short link chain - generally to DIN 766, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . E-7661 . . . . . . . . . . . . . . . . . . . 115
Short link chain - generally to DIN 766, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . G-7662 . . . . . . . . . . . . . . . . . . . 115
Short link chain - generally to DIN 766, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-7660 . . . . . . . . . . . . . . . . . . . 115
Snatch blocks - type 601H, with hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6952 . . . . . . . . . . . . . . . . . . . 126
Snatch blocks - type 601T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6953 . . . . . . . . . . . . . . . . . . . 126
Spring pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7931 . . . . . . . . . . . . . . . . . . . 137
Spring pins - single type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7930 . . . . . . . . . . . . . . . . . . . 137
Swage sockets - closed type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6415 . . . . . . . . . . . . . . . . . . . . 77
Swage sockets - open type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6414 . . . . . . . . . . . . . . . . . . . . 76
Swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7877 . . . . . . . . . . . . . . . . . . . 147
T
Thimbles - for rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6180 . . . . . . . . . . . . . . . . . . . . 58
Thimbles - generally to DIN 3090 - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6135 . . . . . . . . . . . . . . . . . . . . 54
Thimbles - generally to DIN 3090 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6135 . . . . . . . . . . . . . . . . . . . . 54
Thimbles - generally to DIN 3091 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6134 . . . . . . . . . . . . . . . . . . . . 55
Thimbles - generally to DIN 6899 (B) - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6131 . . . . . . . . . . . . . . . . . . . . 52
Thimbles - generally to DIN 6899 (B) - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6131 . . . . . . . . . . . . . . . . . . . . 52
Thimbles - generally to DIN 6899 (C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6132 . . . . . . . . . . . . . . . . . . . . 53
Thimbles - generally to DIN 83311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6133 . . . . . . . . . . . . . . . . . . . . 53
Thimbles - generally to EN 13411-1 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6170 . . . . . . . . . . . . . . . . . . . . 56
Thimbles - generally to US Federal Specification FF-T-276b type III - hot dipped galvanized . . . . . . . . . . . . . . . . G-6142 . . . . . . . . . . . . . . . . . . . . 56
Thimbles - heavy duty stub-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6120 . . . . . . . . . . . . . . . . . . . . 51
Thimbles - heavy type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7860 . . . . . . . . . . . . . . . . . . . 143
Thimbles - pennant line type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6151 . . . . . . . . . . . . . . . . . . . . 57
Thimbles - standard commercial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6110 . . . . . . . . . . . . . . . . . . . . 51
Thimbles - towing type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6160 . . . . . . . . . . . . . . . . . . . . 57
Thimbles - tubular type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6190 . . . . . . . . . . . . . . . . . . . . 58
Threaded terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7836 . . . . . . . . . . . . . . . . . . . 147
Thrust bearing swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7740 . . . . . . . . . . . . . . . . . . . . 97
Thrust bearing swivels Eye - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7730 . . . . . . . . . . . . . . . . . . . . 97
160
Thrust bearing swivels Hook - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7750 . . . . . . . . . . . . . . . . . . . . 98
Thrust bearing swivels Jaw - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7720 . . . . . . . . . . . . . . . . . . . . 96
Thrust bearing swivels Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7710 . . . . . . . . . . . . . . . . . . . . 96
Turnbuckles (hamburgers) - for deck lashing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6330 . . . . . . . . . . . . . . . . . . . . 89
V
Viking hooks - with tapered opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6760 . . . . . . . . . . . . . . . . . . . 104
W
Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6220 . . . . . . . . . . . . . . . . . . . . 64
Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7863 . . . . . . . . . . . . . . . . . . . 143
Wire rope clips - generally to EN 13411-5 Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6260 . . . . . . . . . . . . . . . . . . . . 63
Wire rope clips - generally to NF 00026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6280 . . . . . . . . . . . . . . . . . . . . 65
Y
Yellow Pin Shackles - bow shackles with safety pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3163
. . . . . . . . . . . . . . . . . . 36
Yellow Pin Shackles - bow shackles with screw collar pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3161
. . . . . . . . . . . . . . . . . . 36
Yellow Pin Shackles - dee shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3153 . . . . . . . . . . . . . . . . . . . . 37
Yellow Pin Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3151
. . . . . . . . . . . . . . . . . . 37
161
Thrust bearing swivels Hook - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7760 . . . . . . . . . . . . . . . . . . . . 98
Index by Productnumber
A
A-6550
Aluminium sleeves - for wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
E
E-1151
Commercial Shackles - dee shackles with screw collar pin - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
E-1152
Commercial Shackles - dee shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
E-1161
Commercial Shackles - bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
E-1162
Commercial Shackles - bow shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
E-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - electro-galvanized. . . . . . . . . . . . . . . . . . . . 40
E-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 41
E-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 38
E-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 39
E-6110
Thimbles - standard commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
E-6120
Thimbles - heavy duty stub-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
E-6131
Thimbles - generally to DIN 6899 (B) - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
E-6135
Thimbles - generally to DIN 3090 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
E-6143
Round thimbles - ordinary type - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
E-6180
Thimbles - for rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
E-6220
Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
E-6260
Wire rope clips - generally to EN 13411-5 Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
E-6280
Wire rope clips - generally to NF 00026. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
E-6351
Rigging screws Eye - Eye - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
E-6352
Rigging screws Hook - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
E-6353
Rigging screws Jaw - Jaw - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
E-6354
Rigging screws Eye - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
E-6355
Rigging screws with Welding Ends - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
E-6943
Galvanized malleable iron snatch blocks - with eye, one sheave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
E-6944
Galvanized malleable iron snatch blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
E-7200
E-7210
E-7220
E-7230
Carabine hooks - with pressed thimble and screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
E-7300
E-7310
E-7631
Long link chain - generally to DIN 763, commercial quality - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
E-7661
Short link chain - generally to DIN 766, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
E-7910
Chain repair links - commercial quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
E-7920
S-hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
E-7930
Spring pins - single type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
E-7931
Spring pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
E-7940
Linch pins - with round spring ring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
E-8140
Green Pin® eye bolts - generally to DIN 580 - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
E-8142
Green Pin® eye nuts - generally to DIN 582 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
E-8180
Green Pin® eye bolts C15E - generally to DIN 580 - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
E-8182
Green Pin® eye nuts C15E - generally to DIN 582 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
G
162
G-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 40
G-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 41
G-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 38
G-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - hot dipped galvanized. . . . . . . . . . . . . . . . 39
G-3151
Yellow Pin Shackles - dee shackles with screw collar pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
G-3153
Yellow Pin Shackles - dee shackles with safety pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
G-3161
Yellow Pin Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
G-3163
Yellow Pin Shackles - bow shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
G-3351
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - hot dipped galvanized. . . . . . . . . . . . . . . . . . . . . 33
G-3352
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - hot dipped galvanized . . . . . . . . . . . . . . 33
G-3356
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . 34
G-3461
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . 32
G-3466
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . 32
G-4151
Green Pin® Standard Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
G-4153
Green Pin® Standard Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
G-4154
Green Pin® Trawling Shackles - dee shackles with square headed screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
G-4159
Green Pin® Sunken Hole Shackles - dee shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
G-4161
Green Pin® Standard Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
G-4163
Green Pin® Standard Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
G-4164
Green Pin® Trawling Shackles - bow shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
G-4169
Green Pin® Sunken Hole Shackles - bow shackles with square sunken hole screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
G-4263
Green Pin® Wide Mouth Towing Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
G-5163
Green Pin® Polar Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
G-5263
Green Pin® Super Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
G-6038
Green Pin® Heavy Duty Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
G-6131
Thimbles - generally to DIN 6899 (B) - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
G-6132
Thimbles - generally to DIN 6899 (C). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
G-6133
Thimbles - generally to DIN 83311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
G-6135
Thimbles - generally to DIN 3090 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Thimbles - generally to US Federal Specification FF-T-276b type III - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
G-6143
Round thimbles - ordinary type - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
G-6144
Round thimbles - container type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
G-6151
Thimbles - pennant line type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
G-6160
Thimbles - towing type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
G-6170
Thimbles - generally to EN 13411-1 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
G-6240
Green Pin® wire rope clips - generally to EN 13411-5 Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
G-6311
Green Pin® turnbuckles Eye - Eye - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
G-6312
Green Pin® turnbuckles Hook - Hook - generally to ASTM F1145-92. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
G-6313
Green Pin® turnbuckles Jaw - Jaw - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
G-6314
Green Pin® turnbuckles Eye - Hook - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
G-6315
Green Pin® turnbuckles Eye - Jaw - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
G-6340
Closed body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
G-6343
Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
G-6345
Closed body rigging screws Eye - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
G-6411
Green Pin® sockets - closed spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
G-6412
Green Pin® sockets - open spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
G-6413
Green Pin® sockets - open wedge socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
G-6416
Gold NoseTM sockets - closed spelter socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
G-6917
Galvanized malleable iron blocks - with eye, one sheave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
G-6918
Galvanized malleable iron blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
G-6922
Galvanized malleable iron blocks - with eye, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
G-6923
Galvanized malleable iron blocks - with hook, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
G-6927
Galvanized malleable iron blocks - with eye, three sheaves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
G-6928
Galvanized malleable iron blocks - with hook, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
G-7632
Long link chain - generally to DIN 763, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
G-7662
Short link chain - generally to DIN 766, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
G-7713
Green Pin® swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
G-7723
Green Pin® swivels Jaw - Eye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
P
P-3754
P-3764
Fishing Shackles - bow shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
P-3780
Fishing Shackles - bow shackles with square head screw pin and one flattened eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
P-3785
Fishing Shackles - dee shackles with square head screw pin and one flattened eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
P-3790
Fishing Shackles - bow shackles with square sunken hole screw pin and one flattened eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
P-3795
Fishing Shackles - dee shackles with square sunken hole screw pin and one flattened eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
P-4170
Key for Green Pin® Sunken Hole Shackles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
P-6031
Green Pin® Heavy Duty Polar Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
P-6033
Green Pin® Sling Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
P-6036
Green Pin® Heavy Duty Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
P-6190
Thimbles - tubular type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
P-6411
Green Pin® sockets - closed spelter socket - painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
P-6412
Green Pin® sockets - open spelter socket - painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
P-6413
Green Pin® sockets - open wedge socket - painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
P-6615
Green Pin® plate lifting clamp, type E - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
P-6616
Green Pin® plate lifting clamp, type ES - for lifting and vertical transportation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
P-6625
Green Pin® plate lifting clamp, type EU - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
P-6626
Green Pin® plate lifting clamp, type EUS - for lifting and transportation in all directions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
P-6635
Green Pin® plate lifting clamp, type EH - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
P-6636
Green Pin® plate lifting clamp, type EHS - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
P-6651
Green Pin® plate lifting clamp spare part - lifting eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
P-6652
Green Pin® plate lifting clamp spare part - lock lever assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
P-6654
Green Pin® plate lifting clamp spare part - cam assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
P-6658
Green Pin® plate lifting clamp spare part - universal eye component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
P-6685
Green Pin® lifting clamp, type ESV - for lifting and transportation of steel beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
P-6703A
P-6703C
P-6706A
Green Pin® sliding choker hooks - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
P-6714A
P-6714C
P-6731
Green Pin® pipe line hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
P-6760
Viking hooks - with tapered opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
P-6765
G-hooks - with tapered opening. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
P-6768
Fishcon hooks - with tapered opening. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
P-6835
Green Pin® master links - with flat part. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
P-6855
Green Pin® master link assemblies - with flat part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
P-6860R
Green Pin® connecting links - for connecting grade 80 chain-slings - red. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
P-6860Y
Green Pin® connecting links - for connecting grade 80 chain-slings - yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
P-6916
American pattern cargo blocks - with eye, one sheave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
P-6951
Green Pin® Snatch blocks - type 601S, with Green Pin® Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
P-6952
Snatch blocks - type 601H, with hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
P-6953
Snatch blocks - type 601T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
P-7110G
Green Pin® lever type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-7110R
Green Pin® lever type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-7120
Green Pin® spring type loadbinders - with hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
163
G-6142
P-7130G
Green Pin® ratchet type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-7130R
Green Pin® ratchet type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-7150G
Green Pin® ratchet type loadbinders - without hooks - green. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-7150R
Green Pin® ratchet type loadbinders - without hooks - red. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-7170
Green Pin® ratchet type loadbinders - with hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
P-7190
Green Pin® ratchet type loadbinders - without hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
P-7710
Thrust bearing swivels Jaw - Jaw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
P-7720
Thrust bearing swivels Jaw - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
P-7730
Thrust bearing swivels Eye - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
P-7740
Thrust bearing swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
P-7750
Thrust bearing swivels Hook - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
P-7760
Thrust bearing swivels Hook - Eye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
R
R-7821
Shackles - dee shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
R-7822
Shackles - short twisted type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
R-7825
Shackles - bow shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
R-7829
Shackles - long dee type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
R-7830
Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
R-7834
Fork terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
R-7835
Eye terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
R-7836
Threaded terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
R-7837
Open body rigging screws Hook - Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
R-7838
Open body rigging screws Hook - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
R-7839
Open body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
R-7840
Eye bolts - generally to DIN 580. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
R-7842
Eye nuts - generally to DIN 582 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
R-7860
Thimbles - heavy type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
R-7863
Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
R-7872
R-7873
R-7874
R-7875
R-7876
R-7877
Swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
R-7880
Short link chain - generally to DIN 766 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
R-7890
Long link chain - generally to DIN 763 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
S
164
S-1151
Commercial Shackles - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
S-1152
Commercial Shackles - dee shackles with counter sunk screw pin - self coloured. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
S-1154
Commercial Shackles - dee shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
S-1161
Commercial Shackles - bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
S-1162
Commercial Shackles - bow shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
S-1164
Commercial Shackles - bow shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
S-1165
Mooring Shackles - bow shackles with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
S-1170
Commercial Shackles - danlino V shackles with square head screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
S-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . 40
S-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . 41
S-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . 38
S-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . 39
S-3351
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
S-3352
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . 33
S-3356
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
S-3461
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
S-3466
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
S-3557
S-3559
S-3770
S-6134
Thimbles - generally to DIN 3091 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
S-6330
Turnbuckles (hamburgers) - for deck lashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
S-6414
Swage sockets - open type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
S-6415
Swage sockets - closed type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
S-6500
Prescon sleeves - with colour code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
S-6653
Green Pin® plate lifting clamp spare part - lock spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
S-6655
Green Pin® plate lifting clamp spare part - cam pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
S-6656
Green Pin® plate lifting clamp spare part - pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
S-6657
Green Pin® plate lifting clamp spare part - eye pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
S-7630
Long link chain - generally to DIN 763, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
S-7660
Short link chain - generally to DIN 766, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
S-8140
Green Pin® eye bolts - generally to DIN 580 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
S-8142
Green Pin® eye nuts - generally to DIN 582 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
S-8180
Green Pin® eye bolts C15E - generally to DIN 580 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
S-8182
Green Pin® eye nuts C15E - generally to DIN 582 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
165
General conditions
General conditions of Sale of the private company with
limited liability Van Beest BV, established in Sliedrecht
Article 1.
General
These General Conditions are applicable to all agreements of Van Beest with third parties. The trading conditions of the
client are not accepted by Van Beest.
Article 2.
2.1.
2.2.
Article 3.
3.1.
3.2.
3.3.
3.4.
4.2.
4.3.
5.2.
5.3.
6.2.
166
Risk and Retention of Title
The risk with regard to the damage, theft, loss etc. of the products sold is to be transferred to the buyer at the time that
the sales agreement is concluded where specific products are concerned and, in the case of standard products, at the
moment Van Beest reserves these for the client.
The ownership of the products manufactured by Van Beest and delivered to the client is to be transferred to the client
as soon as he has paid all that is owing to Van Beest arising from deliveries or services, including the interest and costs,
or has provided satisfactory security for the fulfilment of his obligations. As long as this is not the case Van Beest shall
remain entitled to repossess the products it has delivered. All the costs connected therewith are for the account of the
client. The client is not entitled to deliver to third parties products which have not been paid for, unless this is necessary
for its normal business operations.
Article 7.
7.1.
Delivery
The delivery time is to commence from the latest of the following dates:
a. the day of signing of Van Beest’s written order confirmation;
b. the date of receipt of the instalment required by the order;
c. the date of receipt of the technical data, documents and/or securities to be provided to Van Beest by the client.
Exceeding the delivery date does not entitle the client to compensation nor give it the right to demand cancellation of
the agreement or to suspend fulfilment of its own obligations.
In the case of mass production by Van Beest or its suppliers of products which deviate from the standard products in the
production range, Van Beest is entitled to maintain a margin on delivery of 5% above or below the number of products
ordered.
Article 6.
6.1.
Prices and Payment
The prices quoted by Van Beest in catalogues, price lists et cetera are without obligation and may be modified without
prior notification. Prices do not include turnover tax and are based on “ex works” Incoterms current on the date of the
quotation.
Payment is to be made within 30 days of the date of the invoice, unless agreed otherwise. Claims to a reduction or settlement are not permitted. Costs relating to payments via banks, conversion of currency, credit costs etc. are always
to be for the account of the client.
In the event of late payment the client is obliged to pay interest of 3 points above the percentage of the current statutory
interest in The Netherlands as referred to in Section 6:119a and 6:120 Paragraph 2 of the Dutch Civil Code from the due
date of the invoice, whereas Van Beest is entitled to suspend the fulfilment of its obligations by the amount of time by
which the payment has been delayed. Once Van Beest has passed on its claim to payment to third parties, the client is
to become liable to pay extra judicial costs of 15% over and above the amount due, including interest, without prejudice
to the costs which the client is required to settle by law.
Article 5.
5.1.
Agreements
Orders accepted by agents, representatives, commercial travellers and intermediaries only become legal once they
have been confirmed in writing by Van Beest, i.e. by a document signed by both parties, or by letter, fax, e-mail, or any
other instrument as agreed by both parties.
Drawings, calculations, plans, systems, stamps and moulds, methods and other data are to remain the property of Van
Beest and may not be made known to third parties by the client without the prior written permission of Van Beest.
Price increases caused by production activities being delayed and/or made more difficult which are not the responsibility of Van Beest and as a result of an increase of one or more cost price factors although such increase has occurred
due to foreseeable circumstances, and also due to government regulations coming into force are to be for the account
of the client.
The client is entitled to make modifications to the goods to be delivered even after the conclusion of the agreement.
These will only be implemented if Van Beest judges that the production process so allows and provided that the client
has made a written statement to the effect that he is prepared to pay all extra costs associated therewith.
Article 4.
4.1.
Offers
Quotations made by or on behalf of Van Beest are without obligation and are based on any data, drawings et cetera
provided by the client.
The prices stated by Van Beest are based on the price determining factors valid at the time the quotation is made, including government levies and wages, calculated according to the usual working times adhered to by Van Beest. Should
one or more of these cost price factor change after the offer has been made - including changes due to fluctuations
in the exchange rate of foreign currency - even if this is a result of foreseeable circumstances, Van Beest is entitled to
modify the price quoted accordingly.
Security
Notwithstanding the agreed conditions of payment, Van Beest is entitled at all times to demand security from the client
for the fulfilment of his obligations before commencing delivery or before continuing a delivery that has already been
commenced.
8.1.
8.2.
8.3.
8.4.
8.5.
Article 9.
9.1
10.2.
10.3.
10.4.
10.5
13.2.
15.2.
Recission
Should the client be declared bankrupt, should any attachment be levied on its goods, should any suspension of payment be requested or should it fail to fulfil any obligation to Van Beest, Van Beest is entitled to cancel any agreement
not implemented or not implemented fully concluded with the client by a statement in writing.
Article 15.
15.1.
Intellectual Property Rights
The client indemnifies Van Beest against all claims from third parties arising from the alleged violation of the intellectual
property rights due to it.
The client is not entitled without the written permission of Van Beest to use the trade name and the brand or designation
“Green Pin®” for its own trading activities or to associate it with other than “Green Pin®” products. Furthermore the client
is to inform Van Beest immediately with regard to any violation by third parties of this trade name or brand.
Article 14.
14.1.
Taxes
Taxes and levies imposed on Van Beest in the case of export, including import levies, are to be for the account of the
client.
Article 13.
13.1.
Cancellation
Should the client wish to cancel an agreement with reasons for such, he is obliged to purchase all goods ordered and/or
wholly or partially processed by Van Beest, at the agreed price and also to pay Van Beest a compensation of 15% of
the amount of the order, plus any exchange loss on the part of Van Beest.
Article 12.
12.1.
Liability for Damage
Van Beest is bound to compensate for damage suffered by the client should the client be able to prove that the damage
is a result of a defect in a product supplied by Van Beest. Financial loss such as loss of profit, lost earnings, costs in
connection with delay in or standstill of production or any other consequential loss are under no circumstances eligible
for compensation unless in the event of proven intent or intentional recklessness by Van Beest.
Damage to goods belonging to the client and personal injury are to be compensated to a maximum of the amount for
which Van Beest has received compensation from its insurers.
The client indemnifies Van Beest against all claims from third parties in connection with products supplied to the client
by Van Beest, to the extent that this is not for the account of Van Beest arising from the agreement.
Van Beest accepts no liability whatsoever for any advice it provides without express agreement, unless in the event of
proven intent or intentional recklessness by Van Beest.
All claims to compensation are to lapse after one year, to be calculated from the date of the invoice.
Article 11.
11.1.
Non-attributable Failure
Should the non-fulfilment of any agreement on the part of Van Beest be caused by circumstances beyond the control
of Van Beest – even though such circumstances could have been foreseen at the time the agreement was entered
into – such as war or a similar situation, terrorism, mobilisation, revolt, strike, sit-in or picketing, boycott, loss of public
utilities, government measures and shortcoming by suppliers, the consequences of such are not to be attributed to Van
Beest. In such cases the parties are to consult in order to come to a possible adjustment or suspension of the agreement. Should no consensus be reached and the execution of the agreement has become impossible, the agreement
may be cancelled by either party.
Article 10.
10.1.
Guarantee and Complaints
Van Beest guarantees that the products it sells and delivers meet the specifications applicable to these products as
stated in the Van Beest catalogue. Only those specifications expressly agreed in writing apply for products not included
in the Van Beest catalogue. The guarantee is never to be valid for longer than three months from the date of delivery to
the client.
Defects caused by normal wear and tear, inappropriate and/or improper use, or insufficient maintenance, are in no
circumstances to come under any guarantee.
Van Beest is to supply the following test certificates at additional costs:
certificates of classification societies ABS, DNV, Bureau Veritas, R.I.N.A., Germanischer Lloyd, Vinçotte and Lloyd’s
Register of Shipping.
The client is bound to inspect the goods delivered - or have them inspected – immediately on arrival. Complaints regarding the quality or quantity, or other deviations and/or damage are to be submitted by the client in detail to Van Beest
within 14 days of receipt of the goods, in writing, by post, telex, fax or e-mail. Complaints are to be accepted under no
circumstances should the client have processed the products delivered or have delivered them to third parties.
Should Van Beest consider a complaint to be founded, it is bound only to replace the defective products free of charge
and under no circumstances to compensate for consequential loss or damage suffered by the client, however known.
Law Applicable and Disputes
All agreements with Van Beest are governed exclusively by Dutch Law. The stipulations of the Vienna Sales Convention
(CISG) are expressly excluded.
Disputes arising from any agreement concluded with Van Beest are to be submitted to the judgement of the District
Court of Dordrecht, with the exception of the right of Van Beest to summon the client before the competent court according to Dutch law and subject to the competence of the subdistrict court in accordance with the rules of the Dutch law
of civil procedure.
167
General conditions
Article 8.
168
Notes

Shackles - Franklin Offshore

Transcription

Similar documents

Paymentez User How To Guide en

Halloween Party Invitations

Green Pin ROV Shackles

sunburstpicture large

ECLIPSE - modernquiltstudio.com

Georgia Card Carrier - Update 01-13.FH11

DSC-800-English 5/5

View T3 Single Shot Gas Tool And Fasteners Catalog

chip card brochure - Bergengren Credit Union

Deliver a New Level of Customer Service at Point of Sale.