dishwashers/disposers

Transcription

COPYRIGHT AND TRADEMARK INFORMATION
THIS ENTIRE CATA L O G, COPY,PA RT NUMBERS AND UNIQUE METHOD OF SHOWCASING PRODUCTS IS
COPYRIGHT 2006 INTERNATIONAL COMMERCIAL SUPPLY CORPORATION, LLC. ALL RIGHTS RESERVED.
NO PORTION OF THIS CATALOG MAY BE REPRODUCED IN A N Y FORM OR BY A N Y MEANS, IN WHOLE OR
IN PA RT, WITHOUT THE WRITTEN PERMISSION OF INTERNATIONAL COMMERICAL SUPPLY CORPORATION,
LLC
© 2006 INTERNATIONAL COMMERCIAL SUPPLY CORPORATION, LLC
IS A REGISTERED TRADEMARK OF INTERNATIONAL COMMERCIAL SUPPLY CORPORATION, LLC
COVER PHOTOGRAPHS
CONNECTICUT - © GETTYIMAGES.COM
NEVA D A -© GETTYIMAGES.COM
LIMITED WARRANTY POLICY
N O WARRANTY IS OFFERED TO CONSUMERS, AS DEFINED IN THE MAGNUSON-MOSS WARRANTY ACT.ALL ITEMS
SOLD ARE INTENDED FOR RESALE, BUSINESS USE OR EQUIPMENT MANUFACTURE AND WARRANTED AGAINST
DEFECTS IN WORKMANSHIP OR MATERIALS ONLY TO THE EXTENT OF THE WARRANTY SUPPLIED BY T H E
M A N U FACTURER.
EACH ITEM CARRIES THE FULL WARRANTY OF THE MANUFACTURER. INTERNATIONAL COMMERCIAL SUPPLY
C O R P O R ATION, LLC. ASSUMES NO OBLIGATION ON THE PA RT OF A N Y MANUFACTURER EXCEPT TO PROCESS
W ARRANTY CLAIMS TO THE MANUFACTURER ON BEHALF OF OUR CUSTOMERS, INDIVIDUAL MANUFACTURER’S
W ARRANTY POLICIES WILL BE PROVIDED UPON REQUEST.
ILLUSTRATIONS AND DESCRIPTIONS ARE PROVIDED FOR IDENTIFICATION PURPOSES. WE TAKE NO
RESPONSIBILITY T H AT AN ITEM WILL SUIT A SPECIFIC PURPOSE. A N Y LIABILITY CLAIM WILL BE LIMITED TO THE
PURCHASE PRICE.
IN CASE OF DAMAGE OR SHORTAGES IN TRANSIT VIA U.P.S.
UPON DELIVERY OF SHIPMENT, MERCHANDISE SHOULD BE CAREFULLY INSPECTED BY YOU FOR
DAMAGES/SHORTAGES DURING SHIPMENT. IF YOU RECEIVE DAMAGED ITEMS, PLEASE FOLLOW THE
PROCEDURE BELOW:
1.
HOLD THE FOLLOWING ITEMS AT THE ORIGINAL DESTINATION FOR
INSPECTION BY U.P.S.:
A.
THE OUTSIDE CARTO N
B.
ALL INSIDE PACKING MATERIAL
C.
A N Y BROKEN A RTICLES
2.
H AVE OUR SHIPPER NUMBER AND TRACING NUMBER LOCATED ON THE U.P.S. LABEL
AVAILABLE FOR U.P.S. FROM CT SHIPPER #017055, FROM NV SHIPPER #8X5814.
3.
C O N TACT U.P.S. IN YOUR A R E A TO REQUEST U.P.S. INSPECTION NO LATER THAN 24 HOURS
OF RECEIPT OF PACKAGE.
4.
O B TAIN AN LDI# (LOSS DAMAGE INSPECTION #) FROM U.P.S. AND REPORT IT TO US SO THAT
A DAMAGE CLAIM MAY BE FILED.
FOR ASSISTANCE FOR CARRIERS OTHER THAN U.P.S., CALL 800-243-1290 OR 860-738-7112.
TABLE OF CONTENTS
INDEX - SPECIFIC USE ITEMS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - INDEX - MULTI-USE ITEMS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i3 - i8
i9 - i15
BEVERAGE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - COFFEE MAKERS, DISPENSING EQUIPMENT
1 - 29
SANITATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - BOOSTERS, DISHWASHERS, GLASS WASHERS, WASTE DISPOSERS
30 - 95
FRYERS, GREASE FILTERS, WATER COOKERS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
96 - 160
GRILLS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 161 - 242
CHAR BROILERS, GRIDDLES, HOT DOG MACHINES, SKILLETS, WAFFLE BAKER
OVENS, RANGES, BROILERS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
243 - 375
PREPARATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - BLENDERS, CAN OPENERS, CHOPPERS, CUTTERS, JUICERS, MIXERS,
SHREDDERS, SLICERS
376 - 429
STEAMERS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 430 - 501
BOILERS, COOKERS, KETTLES
TOASTERS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
502 - 535
WARMERS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 536 - 600
CHEESE MELTERS, FOOD WARMERS, POPCORN MACHINES
ELECTRICAL SUPPLIES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
601 - 645
GAS SUPPLIES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 646 - 692
HARDWARE, SERVICE SUPPLIES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 693 - 712
PLUMBING SUPPLIES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 713 - 760
REFRIGERATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 761 - 788
THERMOMETERS, GAUGES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 789 - 794
TOOLS, CHEMICALS, LUBRICANTS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 795 - 820
TECHNICAL INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 821 - 845
FUNCTIONAL REPLACEMENT CROSS REFERENCE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 846 - 932
STOCK NUMBER TO PAGE INDEX - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 933 - 964
FORMS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 965 - 969
CUSTOM GASKET, CUSTOM SHELF, ORDER, CREDIT APPLICATION, PASSWORD REQUEST
i1
SALES POLICY
1.
POSSESSION OF THIS CATALOG DOES NOT OBLIGATE US TO ACCEPT A
PURCHASE ORDER OR CONSTITUTE AN OFFER TO SELL. THIS CATALOG IS
INTENDED FOR USE BY THE SERVICE TRADE.
2.
MINIMUM ORDER IS $10.00.
3.
CHARGE ACCOUNTS MAY BE ESTABLISHED BY REQUESTING A CREDIT
APPLICATION. CUSTOMERS WITHOUT APPROVED CREDIT MAY ARRANGE FOR
PAYMENT WITH A CREDIT CARD, CHECK IN A D VANCE OR PAYMENT UPON
DELIVERY.
4.
A SIGNED RESALE CERTIFICATE OR TAX EXEMPT CERTIFICATE MUST BE
PROVIDED OR APPLICABLE SALES TAXES MAY BE CHARGED. CUSTO M E R S
ARE RESPONSIBLE FOR ALL LOCAL, COUNTY, STATE OR FEDERAL TAXES DUE.
5.
SHIPPING, HANDLING AND INSURANCE COSTS ARE PAYABLE BY THE
CUSTOMER.
6.
M A N U FACTURERS PART NUMBERS ARE LISTED ONLY AS A GUIDE AND A R E
NOT INTENDED TO IMPLY THAT THE ITEMS WE SUPPLY WERE PURCHASED
FROM OR MADE FOR A PARTICULAR MANUFACTURER.
ALL PART NUMBERS SHOWN ARE FOR IDENTIFICATION AND REFERENCE
PURPOSES ONLY.
M A N U FACTURERS PART NUMBERS LISTED REPRESENT AN A C C U M U L ATION
OF INFORMATION WE HAVE COMPILED FROM TRADE PUBLICATIONS, OTHER
DISTRIBUTORS, CUSTOMERS AND OUR OWN INVESTIGATION. A LT H O U G H W E
H AVE ATTEMPTED TO VERIFY THE A C C U R A C Y OF THE INFORMATION, WE
CANNOT GUARANTEE THAT THE CONTENTS ARE CORRECT.
7.
RETURNED GOODS WILL NOT BE ACCEPTED UNLESS PRIOR A P P R O VA L IS
ISSUED BY US AND MAY BE SUBJECT TO A RESTOCKING FEE. SPECIAL
ORDERS ARE NOT RETURNABLE.
WE ACCEPT THESE CREDIT CARDS:
i2
International Commercial Supply Corporation, LLC
P.O. Box 999 * 200 International Way * Winchester Business Park
Winsted, Connecticut 06098
800-243-1290 *
(Fax) 800-253-8499
E-Mail - ICS@ICSCPA RTS.COM
ORDER FORM
PLEASE TYPE OR PRINT NEATLY
Ship Via:
Date:
Bill To:
Ship To:
Your Cust No.
Qty
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Comment:
932
Purchase Order Number
Part Number
Your Phone Number
Description
Your Name
Ea Price
Ext Price
HOURS OF OPERATION
PHONE: 800-243-1290
FAX: 800-253-8499
E-MAIL: [email protected]
EASTERN AND CENTRAL TIME ZONE:
S E RVED BY WINSTED, CT. SALES AND DISTRIBUTION CENTER.
M O N D AY THRU FRIDAY 8:00 AM - 5:45 PM EASTERN TIME.
(NOTE: FOR EMERGENCY ORDERS BETWEEN 5:45 - 7:00 PM EASTERN TIME,
C O N TACT OUR LAS VEGAS FACILITY AT 702-876-0667)
M O U N TAIN AND PACIFIC TIME ZONE:
S E RVED BY LAS VEGAS, NV. SALES AND DISTRIBUTION CENTER.
M O N D AY THRU FRIDAY 7:00 AM - 4:30 PM PACIFIC TIME.
International Commercial Supply Corporation, LLC
P.O. Box 999 * 200 International Way * Winchester Business Park
Winsted, Connecticut 06098
860-738-7112 * (Fax) 860-738-7140
E-Mail - ICS@ICSCPA RTS.COM
CREDIT APPLICATION
PLEASE TYPE OR PRINT NEATLY
Date:
Company:
Address:
City,State,Zip:
Phone: (
Fax: (
)
E-MAIL:
)
WEBSITE:
Type Of Business:
Date Business W as Established:
Name Of Person Authorized ToApprove Purchases And Payments:
Estimated Yearly Dollar Amount To Be Purchased:
TRADE REFERENCES
ACCOUNT No.
ADDRESS
NAME
FAX #
1.
City,St,Zip:
2.
City,St,Zip:
3.
City,St,Zip:
4.
City,St,Zip:
BANK REFERENCE(S)
ACCOUNT No.
NAME
ADDRESS
FAX #
PHONE
City,St,Zip:
The information provided in this application is true and accurate. I authorize the bank named herein as
reference to reveal normal credit information to International Commercial Supply Corp LLC for purposes
of credit consideration.
Authorized Signature:
Title:
Date:
933
BOOSTERS/DISHWASHER/DISPOSERS
QUICK REFERENCE TO MULTI-USE AND MANUFACTURERS
THIS PAGE IS A QUICK REFERENCE TO FIND PARTS
FOR BOOSTER, DISHWASHER AND DISPOSER
EQUIPMENT.
BACKFLOW
PREVENTORS
ASCO
SOLENOID VALVES
DISHWASHER
CURTAINS
DIALS
CLEANERS
DISHWASHING
RACKS
MANUFACTURER INDEX
PAGE
ADAMATION
BLAKESLEE
CHAMPION
GENERAL ELECTRIC
GLASS WASHERS
HATCO
HOBART
HUBBELL
INSINGER
IN-SINKERATOR
JACKSON
MASTER
MOYER DIEBEL(CHAMPION)
SALVAJOR
STERO
TOASTMASTER/TOLEDO
VULCAN HART
50
50
51-55
55
56
57-71
72-73
74-76
76
77-79
80-85
86-88
89-90
91
91-92
93-94
94-95
DISPOSER
STRAINER
DRUM
SWITCHES
HAYS
SOLENOID
VALVES
HEATING
ELEMENTS
T&P
RELIEF
VALVES
PARKER
SOLENOID
VALVES
PRESSURE
REDUCING
VALVES
GAUGES &
THERMOMETERS
RAPID ACTION
VALVE
STRAINERS
STUFFING
BOX FITTING
THERMOSTATS
VACUUM
BREAKERS
DESCRIPTION
MULTI-USE INDEX
DESCRIPTION
PAGE
• ASCO COILS
• ASCO REPAIR KIT
• ASCO SOLENOID VALVES
• BACKFLOW PREVENTORS
• CLEANERS
• DIALS
• DISHWASHER CURTAINS
• DISHWASHING RACKS
• DISPOSER STRAINER
• DRUM SWITCHES
• GAUGES
• HAYS COILS
• HAYS REPAIR KITS
• HAYS SOLENOID VALVES
31-33, 36
31, 33, 36
31-33, 36
46, 748
432
609
48
49
31
37
44
34, 37
34
34, 37
30
SCRAP
BLOCKS
WATER
HAMMER
ARRESTORS
PAGE
38-41
• HEATING ELEMENTS
35
• PARKER COILS
35
• PARKER REPAIR KITS
35
• PARKER SOLENOID VALVES
46
• PRESSURE REDUCING VALVES
47
• RAPID ACTION VALVE
48
• SCRAP BLOCKS
48
• STRAINERS
674
• STUFFING BOX FITTING
• TEMP. & PRESSURE RELIEF VALVES 46
42-43
• THERMOMETERS
642-643
• THERMOSTATS
45
• VACUUM BREAKERS
47
• WATER HAMMER ARRESTORS
DISHWASHERS/BOOSTERS/DISPOSERS
FITTING, STRAINER AND ASCO HOT WATER SOLENOID VALVES
STUFFING BOX FITTING
STOCK
No.
SIZE
COMMENTS
A-121
3/8" MPT
REMOVABLE
DISPOSER STRAINER
COMMENTS
B-851
FITS 18" CONE - BLACK PLASTIC
SANITATION
STOCK
No.
NOTE: KEEPS UNWANTED ITEMS OUT OF
DISPOSER.
"RED-HAT II"
HOT WATER VALVES
STOCK
No.
COIL VOLTAGE
PIPE SIZE
H-187A
H-648A
120V
24V
3/8"
H-189A
H-190A
120V
240V
1/2"
H-649A
H-191A
24V
120V
3/4"
H-192A
H-441A
240V
120V
1"
H-187A, H-648A
H-189A, H-190A
H-191A, H-192A
H-649A
H-441A
MOLDED EPOXY COILS
FOR "RED-HAT II"
STOCK
No.
COIL VOLTAGE
H-677
24V
H-678
H-679
120V
240V
H-541
H-194
ENCLOSED COILS "RED-HAT"
24V
H-677
H-678
H-679
H-541
H-194
240V
REPAIR KITS
STOCK
No.
COMMENTS
H-195
H-196
FOR 3/8" - 1/2" VALVES
FOR 3/4" VALVES
H-443
FOR 1" VALVES
H-195
H-196
H-443
31
International Commercial Supply Corp., LLC - Phone 800-243-1290 - Fax 800-253-8499
ASCO HOT WATER SOLENOID VALVES
"RED-HAT II"
HOT WATER VALVES
WITH JUNCTION BOX
STOCK
No.
COIL VOLTAGE
PIPE SIZE
H-431A
H-652A
120V
24V
3/8"
H-433A
H-434A
120V
240V
1/2"
H-653A
H-435A
24V
120V
H-436A
240V
3/4"
MOLDED EPOXY COILS
FOR "RED-HAT II"
STOCK
No.
COIL VOLTAGE
H-677
24V
H-678
H-679
120V
240V
JUNCTION BOX FOR
RED-HAT II COILS
32
STOCK
No.
COMMENT
A-2397
FITS ALL RED HAT II COILS WITH
1/2" FPT CONDUIT
ASCO HOT WATER SOLENOID VALVES AND PARTS
H-655A
H-534A
H-535A
H-707
H-708
H-724
H-537
SANITATION
A-2397
JUNCTION
BOX ONLY
RATED 150 PSI HOT WATER, 50 PSI STEAM
"RED-HAT II" PISTON OPERATING HEADS
CONVERTS ASCO DIAPHRAGM VALVES TO
LONG LASTING PISTON-TYPE VALVES
STOCK
No.
COIL
VOLTAGE
H-655A
H-534A
24
120
H-535A
240
PIPE
SIZE
3/4"
REPAIR KIT
STOCK No.
REPLACEMENT
COIL (RED HAT II)
STOCK No.
H-537
H-724
H-708
H-707
NOTE: FOR JUNCTION BOX ONLY ORDER STOCK NO. A-2397
H-331
H-332
H-377
H-378
GENERIC STYLE HOT
DIAPHRAGM
WATER VALVE REPAIR KITS
ONLY
STOCK
No.
DESCRIPTION
H-377
FITS 3/8" OR 1/2" VALVE
H-378
FITS 3/4" VALVE
STOCK
No.
H-331
H-332
33
HAYS HOT WATER SOLENOID VALVES AND PARTS
HOT WATER
SOLENOID VALVES
• NORMALLY CLOSED
• 195ºF MAXIMUM TEMPERATURE
• 150 PSI MAXIMUM PRESSURE
STOCK
No.
COIL VOLTAGE
PIPE SIZE
H-816
H-819
120V
24V
3/8"
H-820
H-822
120V
240V
1/2"
H-824
H-826
120V
240V
3/4"
COILS
STOCK
No.
VOLTAGE
H-579
H-827
24V
120V
H-829
240V
REPAIR KITS
34
STOCK
No.
COMMENTS
H-318
H-319
FOR 3/8" AND 1/2" VALVES
FOR 3/4" VALVES
PARKER HOT WATER AND REFRIGERATION SOLENOID VALVES
TYPE GP NORMALLY CLOSED
HOT WATER SOLENOID VALVES
COIL
STOCK
No. VOLTAGE
120/240
H-427
H-428
H-1274
H-1275
24
VALVE
NO.
1/4"
3/8"
GP207
GP307
1/2"
3/4"
GP407
GP607
1/2"
3/4"
GP407
GP607
H-597, H-598,
H-427, H-428,
H-1274, H-1275
SANITATION
H-597
H-598
PIPE
SIZE
H-659
H-1100
COIL ONLY
H-659
120/240
H-1100
24
FITS ABOVE VALVES
TYPE GP REPAIR KITS
STOCK
DESCRIPTION
No.
H-599
H-429
H-430
SPECIFICATION
KIT CONSISTS OF
TEFLON
DIAPHRAGM
FITS 3/8", 1/2"
CARTRIDGE AND
GP307, GP407 PLUNGER ASSEMBLY
FITS 3/4", GP607 WITH O-RING SEAL
FITS 1/4", GP207
TYPE GP 317 VALVE BODY,
COIL, AND REPAIR KIT
STOCK
COIL VOLTAGE SPECIFICATIONS
No.
H-1103 3/8" VALVE BODY
N.C.
H-1104 120V COIL, 1/4" TABS APPLIANCE TYPE
H-1105
REPAIR KIT
-
H-1103
H-1104
H-1105
35
ASCO STEAM SOLENOID VALVES AND PARTS
RED HAT II VALVES
STOCK
No.
H-722
H-712
SIZE
VOLTAGE
1/2"
24
120
H-713
H-723
NORMALLY CLOSED VALVES
5-50 PSI OPERATING PRESSURE
PISTON OPERATED
240
24
H-128A
H-409A
3/4"
H-410A
H-411A
1"
H-129
H-722
H-712
H-713
H-723
H-128A
H-409A
120
240
120
240
H-410A
H-411A
REPAIR KITS
H-412
RED HAT I
STOCK No.
RED HAT II
STOCK No.
COMMENTS
H-129
H-536
FOR 1/2" VALVES
H-129
H-412
H-537
H-614
FOR 3/4" VALVES
FOR 1" PISTON VALVES
NOTE: RED HAT I IS DIAPHRAGM STYLE, RED HAT II IS PISTON
STYLE.
H-536
H-537
H-614
COILS
H-134
H-135
36
H-724
H-708
H-707
RED HAT I
STOCK No.
RED HAT II
STOCK No.
VOLTAGE
H-134
H-724
H-708
24
120
H-135
H-707
240
DISHWASHERS/DISPOSERS
HAYS ELECTRO-STEAM VALVES AND ADVANCE CONTROLS SWITCHES
SERIES 2192
ELECTRO-STEAM VALVES
FOR PRESSURES 5-150 PSIG
SIZE
H-143A
1/2"
H-145A
H-147A
3/4"
1"
H-149A
1-1/4"
VOLTAGE
H-143A
H-145A
120
SANITATION
STOCK
No.
H-147A
H-149A
COILS
STOCK
No.
VOLTAGE
H-581A
H-582A
24
120
H-583A
H-584A
208
240
WATER TIGHT FORWARD - REVERSE
DRUM CONTROLS
STOCK
No.
MAXIMUM
HORSEPOWER
E-782
1-1/2 HP-120V 1PH
3 HP-230V 1PH
E-783
3 HP-120V 1PH
7-1/2 HP-230V 1PH
E-784
ENCLOSURE
LxWxD
COMMENTS
6" X 3-3/4" X
3-1/8"
NON-METALLIC
ENCLOSURE
7-1/2 HP-200V 3PH
10 HP-230V 3PH
15 HP-460V 3PH
E-782
E-783
E-784
A-3571
NOTE: FOR REPLACEMENT HANDLE ORDER A-3571
37
DISHWASHERS
HEATING ELEMENTS
• 2" NPT BRASS SCREW PLUG
• INCOLOY SHEATH ELEMENTS
• 60-250ºF INTEGRAL THERMOSTAT AND CUTOUT
• MOUNTING NUT AND GASKET INCLUDED
CHROMALOX HEATING ELEMENTS
STOCK
VOLTS WATTAGE
No.
G-326
C-126A
C-127A
208
C-128A
C-129A
240
C-130A
C-131A
208
240
5000
PHASE
1
3
1
INSIDE TANK
LENGTH
REPLACEMENT
THERMOSTAT
13-1/4"
G-326
7500
3
18-3/4"
2" NPT MOUNTING NUT AND WASHERS
38
STOCK
No.
COMMENT
A-225
PREVENTS LEAKAGE WHEN INSTALLED THROUGH A TANK
DISHWASHERS
HEATING ELEMENTS
• 2" NPT BRASS SCREW PLUG
• 3 STAINLESS STEEL ELEMENTS
• THERMOWELL
SANITATION
STOCK
VOLTS WATTAGE
No.
C-253A
208
C-212A
C-254A
240
208
C-213A
C-214A
240
480
C-256A
C-216A
C-217A
208
240
480
7500
C-257A
C-219A
208
480
10000
PHASE
INSIDE TANK
LENGTH
1
5000
13-1/4"
3
18-3/4"
3
24"
NOTE: NOT SUPPLIED WITH LOCK-NUT ASSEMBLY
2" NPT MOUNTING NUT AND WASHERS
STOCK
No.
COMMENT
A-225
TO PREVENT LEAKAGE WHEN INSTALLED THROUGH A TANK WALL
39
DISHWASHERS
HEATING ELEMENTS
DISHWASHER HEATERS TYPE DWH-MR
· 2" NPT BRASS SCREW PLUG
· INCOLOY SHEATH ELEMENTS
· BUILT-IN ADJUSTABLE THERMOSTAT, 100-210ºF RANGE
· BUILT-IN OVERHEAT CUTOUT WITH MANUAL RESET
· BUILT-IN CONTACTOR
· TERMINAL ENCLOSURE HAS A HINGED, GASKETED COVER/MOISTURE
AND SPRAY RESISTANT
· PILOT LIGHT AND ON/OFF SWITCH ON OUTSIDE OF COVER
· U.L. LISTED
HEATER IS SUPPLIED WITH CLAMPING NUT AND GASKETS FOR OPTIONAL MOUNTING IN THIN WALL
TANKS UP TO 1/4" THICK WITH 2-3/8" DIAMETER OPENING.
208 AND 240V HEATERS ARE COMPLETELY WIRED. 480V UNITS REQUIRE A 120V CONTROL CIRCUIT.
STOCK
No.
VOLTAGE
C-273
208
C-275
C-278
208
208
7500
G-327
G-328
WATTAGE
5000
PHASE
1
3
E-113
PARTS FOR DWH-MR HEATERS
40
STOCK
No.
DESCRIPTION
G-327
G-328
THERMOSTAT
OVER HEAT CUT OUT
E-113
D-111
ON-OFF SWITCH
SIGNAL LIGHT ASSY
INSIDE TANK LENGTH
13-3/16"
18-7/8"
D-111
WATER BOOSTERS
PORTABLE PLUG-IN SINK AND TANK HEATERS
TYPE CH-OTS
APPLICATION
FOR HANDY NON-PERMANENT USE IN TANKS OR SINKS.
FEATURES
HANDY PLUG-IN THREE CONDUCTOR CORD SET THREE
FT. LONG (PLUG TYPE 10-30P).
"A"
HIGH WATT DENSITY ELEMENTS.
BUILT-IN PILOT LIGHT, THERMOSTAT (60-250ºF) AND OVER
TEMPERATURE CONTROL WITH MANUAL RESET (CUT OUT
TEMPERATURE 50º ABOVE THERMOSTAT SET-POINT).
COLD END EXTENDS FULL HEIGHT OF RISER.
"B"
PORTABLE PLUG-IN SINK AND TANK HEATERS
STOCK
No.
VOLTAGE
C-162A
240
C-163A
C-608
208
WATTAGE
"A"
DIMENSION
4000
6000
"B"
DIMENSION
14"
26"
17"
REPLACEMENT THERMOSTAT
STOCK
STYLE
No.
G-260
H-1
DESCRIPTION
THERMOSTAT WITH HIGH LIMIT, SIGNAL LIGHT AND DIAL
41
SANITATION
4 & 6 KW
208 & 240V, 1 PHASE
COPPER SHEATH, NICKEL PLATED,
FOR HEATING CLEAN WATER
DISHWASHERS
MULTI-USE THERMOMETERS
J-106W, J-106R
J-108W, J-108R
J-163
J-107W, J-107R
J-109W, J-109R
DUAL SCALE 100-220ºF, 40-105ºC, 2" DIAL
WITH 1/2" NICKEL PLATED PACKING GLAND
STOCK
No.
STYLE
J-106W
WASH
J-106R
J-107W
RINSE
WASH
J-107R
J-108W
RINSE
WASH
J-108R
J-109W
RINSE
WASH
J-109R
J-163
RINSE
WASH
CAPILLARY
LENGTH
MOUNTING STYLE
REAR U-CLAMP
4 FT.
FRONT FLANGE
REAR U-CLAMP
8 FT.
FRONT FLANGE
12 FT.
REAR U-CLAMP
DUAL SCALE 0-250ºF, 20-120ºC, 3" DIAL
42
STOCK
No.
STYLE
STEM
LENGTH
MOUNTING STYLE
J-110
WASH/RINSE
2-1/2"
1/2" MPT BACK MOUNT
DISHWASHERS
MULTI-USE THERMOMETERS
SANITATION
DUAL SCALE 100-220º F, 40-105º C, 2-1/2" DIAL
STOCK
No.
J-117
STYLE
CAPILLARY
LENGTH
WASH/RINSE
84"
MOUNTING STYLE
1/2" BOTTOM MOUNT
0-220ºF TEST THERMOMETER
MAXIMUM REGISTERING THERMOMETER WILL INDICATE THE
HIGHEST TEMPERATURE REACHED DURING THE TIME IN USE
STOCK
No.
J-116
DESCRIPTION
TEST THERMOMETER IN PROTECTIVE CASE
DIGITAL TEST THERMOMETER
STOCK
No.
J-187
DESCRIPTION
-40 TO 450ºF WATER TIGHT WITH HOLD FEATURE
43
DISHWASHERS/BOOSTERS
MULTI-USE PRESSURE/TEMPERATURE GAUGES
J-105
J-104
COMBINATION PRESSURE/TEMPERATURE GAUGES
DUAL SCALE - 0-200 PSI, 0-1400 KPA, 80-290º F, 30-140º C
STOCK
No.
J-104
J-105
STEM LENGTH
MOUNTING STYLE
2-1/2"
1/2" BOTTOM MOUNT
1/2" BACK MOUNT
J-103
J-118
J-100
DUAL SCALE PRESSURE GAUGES - 2-1/2" DIAL
STOCK
No.
PRESSURE RANGE
J-103
0-100 PSI 0-700 KPA
J-118
J-100
0-200 PSI 0-1400 KPA
0-30 PSI 0-200 KPA
44
MOUNTING STYLE
1/4" BOTTOM MOUNT
1/4" BACK MOUNT
MULTI-USE VACUUM BREAKERS, REPAIR KITS
WATTS CHROME VACUUM BREAKERS AND KITS
PIPE SIZE
REPAIR KIT
H-169
H-170
3/8"
1/2"
H-172
H-173
H-171
3/4"
H-174
H-172
H-173
H-174
H-169
H-170
H-171
SANITATION
STOCK
No.
CONBRACO CHROME VACUUM BREAKERS AND KITS
STOCK
No.
PIPE SIZE
MODEL
REPAIR KIT
H-568A
1/2"
38-203
H-1212
H-569A
3/4"
38-204
H-1213
H-568A
H-569A
H-1212
H-1213
T & S CHROME VACUUM BREAKERS
STOCK
No.
PIPE SIZE
H-1436
3/8"
H-1437
1/2"
H-570
H-571
H-1436
H-1437
H-177
H-439
H-440
H-180
REPAIR KITS FOR OBSOLETE VACUUM BREAKERS
STOCK
MANUFACTURER
No.
H-570
H-571
H-177
H-180
H-439
H-440
CONBRACO
FEBCO
MODEL
SIZE
38-103
1/2"
38-104
715A
3/4"
1/2" - 3/4"
V-350A
SLOAN
V-370A
1/2"
3/4"
45
MULTI-USE VALVES
WATTS WATER PRESSURE REDUCING VALVE
STOCK
No.
SIZE
WIDTH
H-1182
3/4"
4-1/4"
MAX
PRESSURE
TYPE
250 LBS.
N250B
ADJUSTABLE REDUCED PRESSURE RANGE IS 25-75 LBS.
WATTS WATER PRESSURE REDUCING VALVES
WIDTH
MAX
PRESSURE
TYPE
5-1/2"
100 LBS.
25AUB
200 LBS.
U5BLP
STOCK
No.
SIZE
H-657
1/2"
H-658
H-163
3/4"
1/2"
5-3/4"
H-164
3/4"
6-3/8"
FOR HOT WATER WITH BY-PASS 10-35 LBS. REDUCED RANGE
WATTS TEMPERATURE & PRESSURE RELIEF VALVES
3/4" MALE INLET X 3/4" FEMALE OUTLET
STOCK
No.
TYPE
RATING
STEM LENGTH
H-167
H-168
40L
125 PSI - 210ºF
150 PSI - 210ºF
3"
H-329
H-330
40XL
125 PSI - 210ºF
150 PSI - 210ºF
5"
MODEL 9D BACKFLOW PREVENTERS
46
STOCK
No.
SIZE
H-592
1/2" UNION
H-593
3/4" UNION
MULTI-USE PARTS
STOCK
No.
DESCRIPTION
H-492
H-493
1/2"
3/4"
SANITATION
WATER HAMMER ARRESTORS
H-492
H-493
MAY BE INSTALLED IN A HORIZONTAL POSITION
RAPID ACTION RINSE VALVE
STOCK
No.
DESCRIPTION
H-165
1/2" RAPID ACTION VALVE
H-165
47
MULTI-USE CURTAINS, CURTAIN RODS, STRAINERS AND SCRAP BLOCKS
A-1634
A-1885
H-841
H-842
H-840
80 MESH
SCREEN ONLY
CONBRACO Y STRAINERS
STOCK
No.
H-840
H-841
3/8"
1/2"
H-842
3/4"
STOCK
No.
SIZE
TYPE
A-1634
80 SCREEN MESH Y STRAINER
A-1885
NON-ABSORBANT VINYL-ANTI-BACTERIAL CURTAINS
STOCK
No.
SIZE
DESCRIPTION
B-151
22-1/2" X 17"
STANDARD LONG CURTAIN
B-152
B-153
22-1/2" X 12"
22-1/2" X 9"
STANDARD 3/4 CURTAIN
STANDARD SHORT CURTAIN
B-154
B-155
31-1/2" X 19"
31-1/2" X 14"
EXTRA WIDE LONG CURTAIN
EXTRA WIDE 3/4 CURTAIN
B-156
31-1/2" X 11"
EXTRA WIDE SHORT CURTAIN
NOTE: CURTAINS MAY BE CUT FOR EXACT FIT
STAINLESS STEEL CURTAIN RODS
STOCK
No.
SIZE
DESCRIPTION
A-154
A-155
24-1/2"
33-3/4"
STANDARD CURTAIN ROD
EXTRA WIDE CURTAIN ROD
SOLID RUBBER SCRAP BLOCKS
STOCK
No.
DESCRIPTION
B-158
STANDARD SCRAP BLOCK
B-502
FUNNEL SHAPED SCRAP BLOCK
5-3/4" DIA. BOTTOM. B-158 IS 6-5/8" DIA TOP.
B-502 IS 8-3/4" DIA. TOP.
B-158
48
B-502
MULTI-USE DISHWASHING RACKS
SANITATION
FLATWARE WASHING BASKET
STOCK
No.
A-451
DESCRIPTION
8 COMPARTMENTS
7-3/4" X 17-1/8" X 6-3/4"
A-446
A-448
A-450
STACK-ALL DISHWASHING RACKS 19-3/4" X 19-3/4" X 4"
STOCK
No.
DESCRIPTION
APPLICATION
A-446
A-448
ALL PURPOSE PEG RACK
TRAYS, PLATES, CUPS, SAUCERS, BOWLS
COMBINATION RACK
CUPS, BOWLS, FLATWARE
A-450
OPEN BOWL AND CUP RACK
BOWLS, CUPS
49
DISHWASHERS
ADAMATION AND BLAKESLEE SPECIFIC PARTS
ADAMATION
PUMP SEALS
STOCK
No.
B-134
B-256
SHAFT SIZE
REPLACES
B-134
1"
75-7050-020
B-256
5/8"
55-6301-350
1/2" BOTTOM MOUNT THERMOMETER
STOCK
TEMP. RANGE CAPILLARY LENGTH REPLACES
No.
J-117
100-220ºF
84"
70-2470-613
BLAKESLEE
PUMP SEAL
STOCK
No.
SHAFT SIZE
REPLACES
B-132
1"
02255
METAL HOUSED MICRO SWITCH
STOCK
REPLACES
No.
E-151
50
07235
COMMENTS
FINAL RINSE, DOOR INTERLOCK AND CONVEYOR LIMIT
DISHWASHERS
CHAMPION SPECIFIC PARTS
G-451
G-450
G-749
G-449
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
G-449
G-450
EGO
RANCO
107906
103376
FOR UHB, D SERIES, ELECTRIC BOOSTERS
G-451
G-749
ESSEX/STEMCO
-
109069
110562
SANITATION
THERMOSTATS
ELECTRIC HEAT
FOR UH1, UHB, TUW, UC-C, UC-CW
BOOSTER HEATER - UNDERCOUNTER MACHINE
STOCK
No.
C-743
SPECIFICATIONS
REPLACES
COMMENTS
220 VOLTS - 6000 WATTS
107909
UH-B MODEL
3" SQUARE FLANGED HEATING
ELEMENTS WITH GASKET
STOCK
No.
REPLACES
VOLTS
C-595
107839
208
C-597
C-598
107842
109751
480
208
C-600
107846
480
WATTS
5000
10000
HEATING ELEMENT
STOCK
No.
SPECIFICATIONS
REPLACES
C-1180
240V 3000W
109756
C-1180
51
DISHWASHERS
B-134
B-256
B-515
B-712
B-1022
B-891
PUMP SEALS, GASKETS AND O-RING
STOCK
No.
SHAFT
SIZE
REPLACES
MODELS
B-134
1"
100038
FOR 20KB, 30KB, 40KB, 64KB, KL44, 1KAB, T7A, UC SERIES
5/8"
106467
111111
L33, FW60 SERIES
NEW STYLE JET PUMPS "IDENTIFIED BY RUBBER HOSE CONNECTION"
900737
0501881
JET PUMP GASKET KIT FOR 44KB, 60KB, KL44
I-UH, TUW-15, TUW, U-BW, UTL, UH150, UH150B, UL150
111532
DRAIN O-RING
B-256
*B-515
B-891
B-1022
B-712
-
* NOTE: BEFORE S/N 81134 THE IMPELLER MUST BE REPLACED.
E-151
E-818
F-435
E-250
F-433
A-3756
F-434
H-1403
H-1359
G-750
ELECTRICAL COMPONENTS
STOCK
No.
SPECIFICATIONS
REPLACES
E-151
15 AMP-125/250/480 VOLT
100352
RINSE LIMIT SWITCH
E-250
F-433
3/8" FITTING
12A 3 POLE 120V
100170
108122
WATER LEVEL FLOAT SWITCH
CONTACTOR
F-434
F-435
3 POLE
2 PDT 10 A 24 VAC
110806
111067
MOTOR STARTER
RELAY
-
111090
111026
REED SWITCH
REED SWITCH MAGNET
G-750
H-1359
1/4", 120V
0508433
109885
MOTOR CONTROL BOARD
SOLENOID VALVE
H-1403
120V
0306618
DRAIN VALVE
E-818
A-3756
52
COMMENTS
DISHWASHERS
THERMOMETERS
STOCK
No.
J-117
J-110
SPECIFICATIONS
REPLACES
84" CAPILLARY - 1/2" BOTTOM MOUNT
1/2" NPT BACK CONNECTION
100125
104682
J-117
J-110
STOCK
No.
REPLACES
A-1933
106252
TOP WASH HUB BEARING
A-1934
A-1935
106253
106251
LOWER RINSE HUB BEARING
LOWER WASH HUB BEARING
SANITATION
WASH AND RINSE COMPONENTS
MODELS 1 KAB, 1 KACB
DESCRIPTION
A-1934
A-1933
A-1935
20K THRU 64K SERIES, UC-C
STOCK
No.
REPLACES
A-1938
104005
RINSE NOZZLE - OLD STYLE (PLATED)
A-2793
A-2792
180282
108444
RINSE NOZZLE - NEW STYLE (S/S)
WASH NOZZLE - BOTTOM
A-2787
A-2788
108446
108447
WASH NOZZLE - TOP
WASH ARM CAP
DESCRIPTION
A-1938
A-2793
A-2792
A-2788
A-2787
DETERGENT PUMP HOSE
STOCK
No.
REPLACES
DESCRIPTION
B-861
114202
3/16" ID X 3/8" OD X 8-1/4" LONG
B-861
A-3757
DOOR GUIDES
STOCK
No.
REPLACES
COMMENTS
A-3757
108347
MODELS D-HI, D-HB, D-LF
A-3758
110691
MODELS 40KB - 60KB
A-3758
53
DISHWASHERS
A-1926
A-1925
B-507
A-1927
A-1928
A-1929
B-508
A-1930
A-2786
A-4222
A-3324
A-1937
A-2079
MODEL D-HI, MODEL UHB,
STOCK
REPLACES
D-HB, D-LF
No.
UHI, ULF
A-3322
A-3323
A-3759
A-3944
A-1925
A-1926
107331
107330
B-507
A-1927
108016
107334
A-1928
A-1929
107335
107332
B-508
A-1930
108021
110394
A-4222
A-2786
0508540
107328
A-3324
A-1937
107329
110391
A-2079
A-3322
110392
0507443
A-3323
A-3759
0507444
113514
A-3944
0508376
A-3942
54
TOP RINSE NOZZLE
BOTTOM RINSE NOZZLE
RINSE NOZZLE O-RING
TOP WASH NOZZLE - L.H.
YES
YES
TOP WASH NOZZLE - R.H.
BOTTOM WASH NOZZLE
WASH NOZZLE O-RING
WASH HUB PLASTIC BEARING
LOWER WASH ARM BUSHING
WASH ARM PLUG
-
RINSE ARM PLUG
WASH HUB BEARING
YES
-
RINSE ARM SPINDLE AFTER S/N 11599
RINSE ARM NUT AFTER S/N 11599
PLASTIC RINSE ARM BEARING
UPPER RINSE NOZZLE
ELEMENT TUBES AND ROTOR ASSY FOR MODEL CG-4, 6
A-3941
A-3943
-
DESCRIPTION
STOCK
No.
REPLACES
COMMENTS
A-3941
A-3942
0706634
0706635
ELEMENT TUBE
ELEMENT TUBE
A-3943
0707142
ROTOR ASSY
DISHWASHERS
CHAMPION/GENERAL ELECTRIC SPECIFIC PARTS
CHAMPION
3 HOLE MOUNTING STYLE CURTAINS
REPLACES
DESCRIPTION
B-274
106286
25" X 16"
B-277
B-280
106290
106294
26" X 21"
32" X 25"
SANITATION
STOCK
No.
CURTAINS MAY BE CUT FOR EXACT FIT.
CONVEYOR COMPONENTS FOR UC MODELS
STOCK
No.
REPLACES
DESCRIPTION
A-2913
A-2915
108437
108875
CONVEYOR ROLLER
COTTER PIN
A-2913
A-2915
WASH PUMP
STOCK
No.
REPLACES
MODELS
M-356
0710071
UH-150B, UH-150, UL-150
M-356
GENERAL ELECTRIC
PUMP SEAL
STOCK
No.
B-135
SHAFT
SIZE
5/8"
REPLACES
349384-1
COMMENTS
MODELS SK40, SK50, SK60, RA2, RB2, RC2 STA-RITE
PUMP ONLY MACHINE S/N 206335 TO RSL5012
WASH/RINSE MODELS SR30, SR31, SR32, SR33, SR34
STA-RITE PUMP MACHINE S/N 206334 & LATER.
55
GLASS WASHERS
A-1264
A-1265
B-367
B-368
A-1262, A-1517
B-435
B-436
A-1515
A-1528
A-1529
MANUFACTURER AND STOCK NO.
DESCRIPTION
BAR MAID
GLASS PRO
HAMILTON
BEACH
DRIVE GEAR
IDLER GEAR
A-1264
A-1265
A-1515
A-1515
A-1528
A-1528
GEAR BEARINGS
BRUSH 6"
A-1262
B-367
A-1517
B-435
A-1529
-
BRUSH 6-3/4"
BRUSH 8"
B-368
-
B-436
-
NOTE: GLASS MAID IS BY GLASS PRO, DOLL-FLYNN/PUB SCRUB IS BY
HAMILTON BEACH.
SAME DAY SHIPPING ON MOST ORDERS!
STOCK ORDERS* RECEIVED IN CONNECTICUT
BY 5:00PM OR 4:00PM IN LAS VEGAS ARE
NORMALLY SHIPPED THE SAME DAY.
* SUBJECT TO INVENTORY AVAILABILITY
56
GAS BOOSTERS
HATCO POWERMITE GAS BOOSTERS
SANITATION
H-895
H-897
H-896
GAS BOOSTER APPLICATIONS
STOCK
No.
MODEL
DESCRIPTION
H-895
PMG-60 - NAT
FOR SINGLE TANK DOOR TYPE MACHINES
H-896
H-897
PMG-100 - NAT
PMG-200 - NAT
FOR 2-TANK CONVEYOR MACHINES
FOR LARGE CONVEYOR MACHINES
NOTE: SPECIFY NATURAL OR LP WHEN ORDERING.
BOOSTER SIZING
WATER TEMPERATURE RECOVERY TABLE IN G.P.H. (LPH) AND F. (C)
MODEL
INPUT
MBH (1,000
BTU/HR)
30º (16º)
40º (22º)
PMG-60
PMG-100
58
105
181 (685)
321 (1215)
135 (511)
241 (912)
108 (409)
193 (731)
90 (341)
161 (610)
77 (292)
138 (522)
PMG-200
195
602 (2279)
452 (1711)
361 (1367)
301 (1139)
258 (977)
TEMPERATURE RISE
50º (28º)
60º (33)
70º (30º)
NOTE: INSTALLATIONS ABOVE 2,000 FT. (610 M) WILL REDUCE THE ABOVE
CAPACITIES AND MAY REQUIRE ORIFICE CHANGE TO MEET IAS SAFETY
COMPLIANCE. CONSULT "INSTALLATION AND OPERATING MANUAL" FOR SIZING
ADJUSTMENTS AND ORIFICE CHANGES.
57
BOOSTERS
HATCO COMPACT BOOSTER WATER HEATERS
THE HATCO COMPACT ELECTRIC BOOSTER
WATER HEATER PROVIDES ALL THE 180ºF.
(82ºC) FINAL RINSE WATER REQUIRED TO
SANITIZE AND FLASH-DRY DISHES AND
FLATWARE.
FLEXIBILITY
THE SPACE SAVING COMPACT IS EASY TO
INSTALL NEXT TO THE DISHWASHER WITH
SLIDE BRACKETS OR ON 6" (15CM) LEGS. THE
STORAGE CAPACITY IS 6 GALLONS (23
LITERS).
QUALITY
C-45
THE FOLLOWING FEATURES ASSURES THE
FINEST PERFORMANCE FOR YEARS TO COME.
• ALL MODELS INCLUDE A CASTONE LINED
TANK WITH A TEN YEAR LIMITED WARRANTY.
• FEATURES INCLUDE A TEMPERATURE/
PRESSURE RELIEF VALVE, A CAST IRON
PRESSURE REDUCING VALVE, TWO TEMPERATURE/PRESSURE GAUGES, A HIGH TEMPERATURE LIMIT CONTROL, PILOT INDICATOR LIGHT,
ON/OFF SWITCH AND A LOW WATER CUT-OFF
TO PREVENT ELEMENT BURNOUT DUE TO A
LOW WATER CONDITION.
• AVAILABLE WITH SIDE BRACKETS FOR
MOUNTING UNDER A DISH TABLE.
C-12
WATER TEMPERATURE RECOVERY TABLE
COMPACT MODEL
40ºF. (22ºC) RISE
70ºF. (39ºC) RISE
• EACH BOOSTER HAS FIBERGLASS INSULATION TO MINIMIZE HEAT LOSS.
C-4
C-5
40 GPH (151 LPH)
50 GPH (189 LPH)
23 GPH (87 LPH)
29 GPH (110 LPH)
• BUILT-IN LOW WATER PROTECTION PREVENTS
HEATING ELEMENT BURNOUT.
C-6
C-7
60 GPH (227 LPH)
70 GPH (265 LPH)
34 GPH (129 LPH)
40 GPH (151LPH)
C-9
C-12
90 GPH (341 LPH)
120 GPH (454 LPH)
52 GPH (197 LPH)
68 GPH (261 LPH)
C-13
C-15
135 GPH (511 LPH)
151 GPH (572 LPH)
77 GPH (292 LPH)
86 GPH (326 LPH)
• A STAINLESS STEEL FRONT PANEL AND
POWDER COATED SILVER GRAY HAMMERTONE
BODY IS STANDARD ON ALL COMPACT
MODELS.
C-17
C-18
173 GPH (655 LPH)
181GPH (685 LPH)
99 GPH (375 LPH)
103 GPH (390 LPH)
C-24
C-27
241 GPH (912 LPH)
271 GPH (1026 LPH)
138 GPH (522 LPH)
155 GPH (587 LPH)
• REMOVABLE FRONT PANELS MAKE ACCESS
TO CONTROLS EASY AND CONVENIENT.
C-30
C-36
301 GPH (1139 LPH)
361 GPH (1367 LPH)
172 GPH (651 LPH)
206 GPH (780 LPH)
C-39
C-45
391 GPH (1480 LPH)
452 GPH (1711 LPH)
224 GPH (848 LPH)
258 GPH (977 LPH)
C-54
C-57/C-58
542 GPH (2052 LPH)
588 GPH (2226 LPH)
310 GPH (1174 LPH)
335 GPH (1268 LPH)
• HATCO ELECTRIC BOOSTER HEATERS ARE
FACTORY PRE-PLUMBED AND PRE-WIRED WITH
CALIBRATED IMMERSION THERMOSTAT AND
HIGH TEMPERATURE LIMIT SWITCH.
58
BOOSTERS
HATCO IMPERIAL BOOSTER WATER HEATERS
SANITATION
THE HATCO IMPERIAL ELECTRIC BOOSTER
WATER HEATER COMBINES QUALITY CONSTRUCTION AND RUGGED DEPENDABILITY TO
PROVIDE UP TO 600 GPH (2300 LPH) OF
SANITIZING RINSE WATER. DISHES AND
FLATWARE AIR-DRY INSTANTLY TO SAVE
TIME, SPACE AND MONEY. STORAGE CAPACITY
IS 16 GALLONS (60 LITERS).
FLEXIBILITY
MODELS AVAILABLE FROM 6KW TO 57 KW IN
208, 240 AND 480 VOLTS WITH OTHER
VOLTAGES AVAILABLE. THE IMPERIAL
ELECTRIC BOOSTER HEATER THERMOSTATS
CAN BE LOWERED TO A 140ºF. (60ºC) SETTING
FOR LOW-TEMP DISH MACHINES.
SERVICE AREA IS ACCESSIBLE FROM THE
FRONT TO PERMIT EASY INSTALLATION, EVEN
NEXT TO OTHER EQUIPMENT.
QUALITY
S-54
THE FOLLOWING FEATURES ASSURE THE
FINEST PERFORMANCE FOR YEARS TO COME.
• ALL MODELS INCLUDE A CASTONE LINED
TANK WITH A TEN YEAR LIMITED WARRANTY.
• FEATURES INCLUDE A TEMPERATURE/
PRESSURE RELIEF VALVE, A CAST IRON
PRESSURE REDUCING VALVE, TWO TEMPERATURE /PRESSURE GAUGES, A HIGH TEMPERATURE LIMIT CONTROL, PILOT INDICATOR LIGHT,
ON-OFF SWITCH AND A LOW WATER CUT-OFF
TO PREVENT ELEMENT BURNOUT DUE TO LOW
WATER CONDITION.
• EACH BOOSTER HAS A BUILT-IN HEAT TRAP
AND FIBERGLASS INSULATION TO MINIMIZE
HEAT LOSS.
• LOW WATER PROTECTION PREVENTS
HEATING ELEMENT BURNOUT, AND ALERTS
OPERATOR TO LOW WATER CONDITION.
•HATCO ELECTRIC BOOSTER HEATERS ARE
FACTORY PRE-PLUMBED AND PRE-WIRED WITH
CALIBRATED IMMERSION THERMOSTATS AND
HIGH TEMPERATURE LIMIT SWITCH.
• A STAINLESS STEEL FRONT PANEL AND
POWDER COATED SILVER GRAY HAMMERTONE
BODY IS STANDARD ON ALL IMPERIAL
MODELS.
WATER TEMPERATURE RECOVERY TABLE
40ºF (22ºC) RISE
70ºF (39ºC) RISE
S-6
S-7
60 GPH (227 LPH)
70 GPH (265 LPH)
34 GPH (129 LPH)
40 GPH (151 LPH)
S-9
S-12
90 GPH (341 LPH)
120 GPH (454 LPH)
52 GPH (197 LPH)
69 GPH (261 LPH)
S-13
S-15
135 GPH (511 LPH)
151 GPH (572 LPH)
77 GPH (292 LPH)
86 GPH (326 LPH)
S-17
S-18
173 GPH (655 LPH)
181 GPH (685 LPH)
99 GPH (375 LPH)
103 GPH (390 LPH)
S-24
S-27
241 GPH (912 LPH)
271 GPH (1026 LPH)
138 GPH (522 LPH)
155 GPH (587 LPH)
S-30
S-36
301 GPH (1139 LPH)
361 GPH (1367 LPH)
172 GPH 651 LPH)
206 GPH (780 LPH)
S-39
S-40
391 GPH (1480 LPH)
407 GPH (1541 LPH)
224 GPH (848 LPH)
232 GPH (878 LPH)
S-45
S-54
452 GPH (1711 LPH)
542 GPH (2052 LPH)
258 GPH (977 LPH)
310 GPH (1174 LPH)
S-57
588 GPH (2226 LPH)
335 GPH (1268 LPH)
IMPERIAL MODEL
59
BOOSTERS
HATCO COMPACT BOOSTER WATER HEATERS
STOCK MODELS
STOCK
No.
C-630
C-632
C-633
C-1045
WE STOCK A WIDE VARIETY
OF HATCO BOOSTERS FOR
IMMEDIATE SHIPMENT
C-634
C-635
MODEL
VOLTAGE
PHASE
C-6
208
208
1-3
C-9
C-12
C-636
C-637
INCLUDES TEMPERATURE AND PRESSURE RELIEF
VALVE.
WORKING PRESSURE OF TANKS, 150 PSI (1034 KPA) TESTED AT 300 PSI (2069 KPA).
IMPORTANT - BOOSTER MUST BE INSTALLED IN
HORIZONTAL POSITION WITH INLET AT LOWEST
POINT FOR PROPER OPERATION.
240
208
1
240
208
3
240
240
C-638
C-639
C-15
C-640
C-641
C-17
C-642
C-991
C-36
C-778
C-643
C-39
C-644
C-645
C-45
1
208
240
208
240
480
3
208
240
480
C-646
C-992
C-54
208
480
C-647
C-648
C-57
208
480
CALL FOR AVAILABILITY FOR OTHER MODELS.
NON-STOCK MODELS CAN BE SHIPPED DIRECT
FROM HATCO TO YOUR LOCATION.
A-3136
BOOSTER LEG
60
STOCK
No.
REPLACES
DESCRIPTION
COMMENTS
A-3136
05.30.069
6" PLASTIC LEG ADJUSTABLE
AFTER 07/1999
BOOSTERS
HATCO SPECIFIC PARTS
G-117
THERMOSTATS
SPECIFICATIONS
REPLACES
COMMENTS
G-117
ROBERTSHAW S-5-12
G-254
ESSEX/STEMCO
02.16.001A
.
02.16.024
G-253
G-758
HONEY WELL
02.16.003
R02.16.068
OLD STYLE UNITS
MINI & COMPACT UNITS
4 THRU 18 KW & IMPERIAL MODELS
COMPACTS 24 THRU 58.5 KW MODELS
G-253
G-254
GAS PMG-60, 100,200
G-758
MANUAL RESET HIGH LIMITS
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
G-631
G-757
ESSEX/STEMCO
SEICO OM320
02.16.116
02.16.106
FOR ALL ELECTRIC MODELS
FOR GAS PMG-100, 200
LOW WATER CUT OFF AND PROBE
STOCK
No.
SPECIFICATIONS
E-216
F-173
120/240V CIRCUIT BOARD
-
G-757
G-631
E-216
COMMENTS
REPLACES
R02.01.210
02.40.001
F-173
ALL MODELS
PROBE FOR E-216
MODEL PMG IGNITION MODULE, CABLE AND PROBE
STOCK
No.
SPECIFICATIONS
REPLACES
DESCRIPTION
F-438
L-346
F-467
S8670E
30" LONG
4" PROBE, 30" LEADS
R02.21.022
02.21.019
R02.16.069
IGNITION MODULE
SPARK CABLE
PROBE
F-438
L-346
F-467
TRANSFORMERS
STOCK
No.
F-175A
F-185
*F-174
SPECIFICATIONS
208/240V. PRIMARY
120V. SECONDARY
480V. PRIMARY
120V. SECONDARY
460V. PRIMARY
230V. SECONDARY
WITH FUSE HOLDER
REPLACES
COMMENTS
F-175A
02.17.004
02.17.005
F-185
FOR ALL MODELS
R02.17.002
F-174
*F-174 TRANSFORMER IS USES D-116 FUSE.
61
SANITATION
STOCK
No.
BOOSTERS
FUSES
AGC
SC
JJN
JJS
STOCK
SPECIFICATIONS
No.
REPLACES
COMMENTS
D-116
D-144
D-190
D-118
D-155
D-156
D-157
D-158
D-159
D-160
D-161
D-162
02.03.005
02.03.001
*R02.03.013
02.03.014
*R02.03.030
*R02.03.031
*R02.03.032
*R02.03.033
*R02.03.010
*R02.03.011
*R02.03.012
*R02.03.015
480V. MODELS
208/240V. MODELS
CONTROL FUSE - 480V. MODELS
CIRCUIT FUSE - 208/240V MODELS
SC - 1/2 AMP
AGC - 1AMP
JJS - 1 AMP
SC - 2 AMP
JJN - 35 AMP
JJN - 40 AMP
JJN - 50 AMP
JJN - 60 AMP
JJS - 35 AMP
JJS - 40 AMP
JJS - 50 AMP
JJS - 60 AMP
CIRCUIT FUSE
*HATCO REPLACES NUMBER IS FOR PK OF 2, WE SELL EACH.
CONTACTORS
STOCK
No.
F-115B
F-116B
F-121B
F-122B
F-123B
F-124B
F-268
F-284
SPECIFICATIONS
REPLACES
40 AMPS, 3 POLE, 110/120V. COIL
02.01.011
02.01.012
02.01.015
02.01.016
02.01.017
02.01.018
02.01.038
02.01.040
H-330
COMMENTS
ALL COMPACT
AND IMPERIAL
MODELS
3 PHASE MINI COMPACT
1 PHASE MINI COMPACT
H-1328
H-1237
H-1182
PRESSURE REDUCING AND RELIEF VALVES
STOCK
No.
TYPE
H-1182 N250B
H-330
40XL
*H-1237 40XL-Z2
H-1328
10L-2
PIPE
SIZE
3/4"
RATING
DESCRIPTION
25 TO 75 LBS
4-1/4" WIDE WATER PRESSURE REDUCING VALVE
150 PSI - 210ºF
5" STEM LENGTH TEMP/PRESS RELIEF VALVE
RELIEF VALVE FOR PMG-60
*H-1237 ORIGINAL REPLACEMENT. TOP HEIGHT IS 1-1/2".
62
BOOSTERS
HEATING ELEMENTS WITH GASKET
STOCK
No.
WATTS
REPLACES
C-172
C-173
208
240
3000
R02.04.302
R02.04.303
C-174
C-175
208
240
3500
R02.04.350
R02.04.351
C-176
C-177
208
240
C-1122
C-178
480
208
C-179
C-989
240
480
C-180
C-181
208
240
C-604
C-421
480
208
C-182
C-183
240
C-584
C-465
480
208
C-466
C-446
240
208
C-447
C-467
240
480
C-468
C-469
208
240
C-470
C-471
480
208
C-472
C-473
240
480
4000
COMMENTS
SANITATION
VOLTS
R02.04.400
R02.04.401
R02.04.404
R02.04.450
4500
R02.04.451
R02.04.453
5000
R02.04.500
R02.04.501
5750
R02.04.502
R02.04.600
FOR
COMPACT
6000
R02.04.600A
R02.04.603
AND
IMPERIAL
R02.04.605
R02.04.650
MODELS
6500
7500
9000
R02.04.653
R02.04.700
R02.04.701
R02.04.703
R02.04.710
R02.04.711
C-471
C-472
C-473
R02.04.713
R02.04.731
9500
R02.04.733
R02.04.735
HEATING ELEMENT MOUNTING HARDWARE
STOCK
No.
REPLACES
DESCRIPTION
A-950
05.04.022
SQUARE HEAD BOLT
A-951
B-301
05.04.028
02.11.012
NUT FOR A-950
FLANGE GASKET
A-950
A-951
B-301
63
WATER HEATERS
HATCO SANITIZING SINK HEATERS
THE HATCO 3CS SANITIZING SINK HEATER
MAKES MANUAL WAREWASHING FASTER
AND MORE CONVENIENT. IT MAINTAINS A
CONTINUOUS SUPPLY OF SANITIZING RINSE
WATER WITHOUT TAKING UP VALUABLE
SINK SPACE.
FLEXIBILITY
DESIGNED TO FIT UNDER THE CENTER OF
THE SINK, THE 3CS IS PERFECT FOR 3 OR 4
COMPARTMENT SINKS, POT AND PAN SINKS
AND BAR SINKS.
THE 3CS FEATURES A UNIQUE DUAL
RESERVOIR SYSTEM. ONE RESERVOIR
CONTAINS THE HEATING ELEMENT AND
SHOULD ALWAYS BE FILLED WITH WATER.
THE OTHER RESERVOIR TRAPS AND
COLLECTS SOIL CARRIED FROM OTHER SINK
COMPARTMENTS. THE RESERVOIR IS EASILY
EMPTIED AFTER EACH USE BY A CONVENIENT DRAIN.
3CS-9
QUALITY
FINEST PERFORMANCE FOR YEARS TO
COME.
• ALL MODELS INCLUDE STAINLESS STEEL
FRONT, POWDER COATED SILVER GRAY
HAMMERTONE BODY AND CONVENIENT SIDE
DRAIN.
• EVERY HATCO 3CS IS EQUIPPED WITH AN
ECO (ENERGY CUT-OFF) WIRED INTO THE
ELECTRICAL CIRCUIT. THIS BUILT-IN PROTECTION "BREAKS" THE POWER TO THE
ELEMENTS IF THE TEMPERATURE OF THE
WATER GOES ABOVE THE NORMAL
THERMOSTAT SETTING.
• AN ON/OFF TOGGLE SWITCH ACTIVATES
THE HEATER AND A YELLOW LIGHT INDICATES WHEN POWER IS ON. A RED LIGHT IS
AN OVERTEMP INDICATOR POINTING OUT
THE NEED TO REFILL THE UNIT WITH WATER
AND RESET THE UNIT.
• EACH 3CS MODEL FEATURES A STAINLESS
STEEL TANK WITH A 5 YEAR WARRANTY.
MODEL SPECIFICATIONS
MODEL
KW
3CS-3
3
3CS-4
3CS-6
4.5
6
3CS-9
3CS-3B
9
3
3CS-4B
3CS-6B
4.5
6
3CS-9B
9
PHASE
1
1 OR 3*
15" (38 CM) SQUARE OR LESS
16"- 18" (41-46 CM) SQ.
19"- 21" (48-53 CM) SQ.
OVER 21" (53 CM) SQ.
15" (38 CM) SQUARE OR LESS
16"- 18" (41-46 CM) SQ.
19"- 21" (48-53 CM) SQ.
27 LBS. (12 KG)
30 LBS. (14 KG)
NOTE: SPECIFY VOLTAGE.
* OPEN DELTA ON 3 PHASE. LARGER CIRCUIT REQUIRED THAN
FOR BALANCED 3 PHASE OF EQUAL K.W.
"B" STYLE IS BALANCED 3 PHASE.
STOCK MODELS
STOCK
No.
MODEL
VOLTS
KW
PHASE
C-1083
C-1084
3CS-6
3CS-9
208
6
9
1 OR 3
NOTE: OTHER VOLTAGES AND MODELS AVAILABLE.
64
24 LBS. (11 KG)
OVER 21" (53 CM) SQ.
• AVAILABLE WITH AN OPTIONAL TEMPERATURE MONITOR OR TEMPERATURE LIGHT
THAT INDICATES WHEN WATER REACHES
THE SANITIZING TEMPERATURE.
• THE 3CS IS SHIPPED READY TO INSTALL
WITH ALL GASKETS AND FITTINGS.
3
SHIP WT.
SINK SIZE
SINK HEATERS
G-536
G-253
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
G-253
G-536
ESSEX/STEMCO
KX
02.16.003
02.16.003A
1/4" BULB ALL 3CS MODELS
3/8" BULB ALL 3CS MODELS
SANITATION
THERMOSTATS
D-243
D-192
E-222
SWITCH AND SIGNAL LIGHTS
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
E-222
D-243
D-192
125/250 V - 20 AMP
250 V - RED
250 V - YELLOW
R02.19.008A
02.19.151
02.19.152
ALL 3CS MODELS
OVER TEMP. LIGHT
POWER ON LIGHT
D-144
F-174
TRANSFORMER, FUSE
STOCK
No.
F-174
D-144
SPECIFICATIONS
460 V PRIMARY
230 V SECONDARY
AGC-1 AMP
REPLACES
R02.17.002
COMMENTS
ALL 460 V UNITS
02.03.001
65
SINK HEATERS
F-271
F-201
F-122B
F-272
CONTACTOR AND RELAYS
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
F-122B
F-271
50 AMP, 3 POLE, 208/240V COIL
30 AMP, SPDT, 208/240V COIL
02.01.016
02.01.007
CONTACTOR
RELAY OLD STYLE - 3CS "B" MODELS
30 AMP, DPST, 240V COIL
25 AMP, SPDT, 208/240V COIL
02.01.008
R02.01.025
RELAY - ALL 3CS MODELS
RELAY NEW STYLE - ALL 3CS MODELS
F-201
F-272
B-514
ELEMENTS WITH GASKET FOR 3CS MODELS
STOCK
No.
VOLTS
C-422
208
C-423
C-744
240
480
C-424
C-425
208
240
4500
R02.06.450
R02.06.451
C-727
B-514
480
-
-
R02.06.452
05.06.005
66
WATTS
REPLACES
COMMENTS
R02.06.300
3000
R02.06.301
R02.06.303
CONSULT ICS TO IDENTIFY
CORRECT ELEMENTS FOR "B"
BALANCED MODELS
GASKET ONLY
SINK HEATERS
THERMOMETER
J-153
SPECIFICATIONS
REPLACES
COMMENTS
0-220ºF - 3/8" FITTING
03.01.005
ALL 3CS MODELS
H-843
B-509
B-510
B-511
B-738
A-1939
B-512
SANITATION
STOCK
No.
B-513
SINK STRAINER ASSEMBLY
STOCK
No.
SPECIFICATIONS
REPLACES
H-843
*B-738
COMPLETE STRAINER ASSEMBLY
WASHER SET
R05.30.009
R00.05.0002
B-509
B-510
THIN RUBBER WASHER
THICK RUBBER WASHER
05.30.009B
05.30.009C
B-511
A-1939
FIBER WASHER
LOCK NUT
05.30.009D
05.30.009A
B-512
B-513
UNION GASKET
RUBBER STOPPER
05.06.009
05.06.026
COMMENTS
ALL 3CS MODELS
INDIVIDUAL PARTS FOR
H-843 SINK STRAINER
* B-738 WASHER SET CONSISTS OF 2 EA B-509, 4 EA B-510, 2 EA B-511, 2 EA B-512
B-1023
CLEAN OUT CAP GASKET
STOCK
No.
REPLACES
B-1023
05.06.066
COMMENTS
ALL 3CS MODELS
67
FOOD RETHERMALIZER/BAIN-MARIE HEATERS
HATCO
THE HATCO FR IS DESIGNED TO BE USED
WITH A BAIN-MARIE OR FOOD
RECONSTITUTOR, TO HEAT OR HOLD FOODS
AT SAFE TEMPERATURES BETWEEN 140º F.
AND 190ºF (60 -88ºC)
FLEXIBILITY
THE FR MOUNTS EASILY TO THE UNDERSIDE
OF A HOLDING VESSEL, LEAVING THE ENTIRE
VESSEL AREA FREE. WATER IS CONTINUALLY CIRCULATED TO AVOID ANY "COOL"
SPOTS. THE UNIT CONTROLS WATER
TEMPERATURE FROM 140ºF (60ºC) TO 190ºF
(88ºC).
THE HATCO FR IS SHIPPED FACTORY
ASSEMBLED, PRE-WIRED AND INCLUDES
STANDARD 2" (5 CM) STAINLESS STEEL
PLUMBING FITTINGS FOR MOUNTING INTO A
HOLDING TANK. A FULL SIZE TEMPLATE IS
SUPPLIED TO PROPERLY LOCATE FITTING
HOLES.
FR-6
QUALITY
MODEL SPECIFICATIONS
FINEST PERFORMANCE FOR YEARS TO
COME.
• EVERY HATCO FR IS EQUIPPED WITH AN
ECO (ENERGY CUT-OFF) WIRED INTO THE
ELECTRICAL CIRCUIT. THIS BUILT-IN PROTECTION "BREAKS" THE POWER TO THE
ELEMENTS IF THE TEMPERATURE OF THE
WATER GOES ABOVE THE NORMAL
THERMOSTAT SETTING.
• EACH FR MODEL FEATURES A STAINLESS
STEEL TANK WITH A 5 YEAR LIMITED
WARRANTY.
• AN OPTIONAL LOW WATER CUT-OFF IS
AVAILABLE TO PREVENT ELEMENT BURNOUT DUE TO A LOW WATER CONDITION.
• THE HATCO FR HAS SEPARATE DUMP AND
HEATING COMPARTMENT DRAINS FOR
CLEANING AND SANITIZING.
MODEL
KW
PHASE
FR-3
FR-4
3.3
4.8
1
FR-6
FR-9
6.3
9.3
1 OR 3*
FR-3B
FR-4B
3.3
4.8
FR-6B
FR-9B
6.3
9.3
DIMENSIONS (WxDxH)
SHIP WT.
24 LBS. (11 KG)
6-3/4" X 12-1/4" X 16-7/8" (17 X 31 X 43 CM)
3
27 LBS. (11 KG)
8" X 12-1/4" X 17-1/8" (20 X 31 X 44 CM)
30 LBS. (14 KG)
NOTE: SPECIFY VOLTAGE.
* OPEN DELTA ON 3 PHASE. LARGER CIRCUIT REQUIRED THAN
FOR BALANCED 3 PHASE OF EQUAL K.W.
"B" STYLE IS BALANCED 3 PHASE.
STOCK MODELS
STOCK
No.
MODEL
C-994
FR-6
C-796
FR-9
VOLTS
208
KW
6.3
9.3
NOTE: OTHER VOLTAGES AND MODELS AVAILABLE.
68
PHASE
1-3
FOOD RETHERMALIZER/BAIN-MARIE HEATERS
G-453
THERMOSTAT
SPECIFICATIONS
REPLACES
COMMENTS
G-453
ESSEX/STEMCO
02.16.016
ALL FR MODELS
SANITATION
STOCK
No.
E-107
G-395
HIGH LIMIT THERMOSTATS
STOCK
No.
SPECIFICATIONS
REPLACES
G-395
E-107
ESSEX/STEMCO
SURFACE MOUNT
02.16.025A
02.16.009
COMMENTS
ALL FR MODELS
FR3, FR4, 208/240V UNITS
F-173
E-397
LOW WATER CUT OFF AND PROBE
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
E-397
F-173
208/240 V.
-
02.01.002
02.40.001
ALL FR MODELS
PROBE FOR E-397
D-192
D-245
E-222
SWITCH AND SIGNAL LIGHTS
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
E-222
D-245
D-192
125/250 V. - 20 AMP
250 V. - GREEN
250 V. - YELLOW
R02.19.008A
02.19.150
02.19.152
ALL FR MODELS
POWER ON LIGHT
AT TEMPERATURE LIGHT
69
FOOD RETHERMALIZER/BAIN-MARIE
D-116
D-144
F-174
TRANSFORMER, FUSES
STOCK SPECIFICATIONS
REPLACES
No.
460V PRIMARY
F-174
D-144
230V SECONDARY
AGC-1 AMP
D-116
SC 1/2
R02.17.002
COMMENTS
ALL 460V UNITS
02.03.001
OLD STYLE
02.03.005
NEW STYLE
NOTE: F-174 TRANSFORMER IS NOW USING D-116 FUSE
F-122B
F-201
CONTACTOR, RELAY
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
F-122B
F-201
50 AMP, 3 POLE, 208/240V COIL
30 AMP, DPST, 240V COIL
02.01.016
02.01.008
ALL 480V UNITS
208/240V UNITS
TERMINAL BLOCK
70
STOCK
No.
SPECIFICATIONS
REPLACES
D-252
3 POLE TERMINAL BLOCK
R02.15.003
FOOD RETHERMALIZER/BAIN-MARIE
THERMOMETER
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
J-153
0-220ºF - 3/8" FITTING
03.01.005
MODEL FR5R
H-843
B-512
A-1939
SANITATION
B-509
B-510
B-511
B-513
B-738
SINK STRAINER ASSEMBLY
STOCK
No.
SPECIFICATIONS
REPLACES
H-843
COMPLETE STRAINER ASSEMBLY
R05.30.009
*B-738
B-509
WASHER SET
THIN RUBBER WASHER
R00.05.0002
05.30.009B
B-510
B-511
THICK RUBBER WASHER
FIBER WASHER
05.30.009C
05.30.009D
A-1939
B-512
LOCK NUT
UNION GASKET
05.30.009A
05.06.009
B-513
RUBBER STOPPER
05.06.026
COMMENTS
ALL FR MODELS
INDIVIDUAL PARTS FOR
H-843 SINK STRAINER
* B-738 WASHER SET CONSISTS OF 2 EA B-509, 4 EA B-510, 2 EA B-511, 2 EA B-512
CLEAN OUT CAP GASKET
STOCK
No.
REPLACES
B-1023
05.06.066
COMMENTS
ALL FR MODELS
B-1023
HEATING ELEMENTS WITH GASKET
STOCK
No.
VOLTS
C-422
208
C-423
C-424
240
208
C-425
240
WATTS
3000
4500
REPLACES
R02.06.300
R02.06.301
R02.06.450
R02.06.451
NOTE: REPLACES DUAL WATT HEATING ELEMENTS
71
DISHWASHERS
HOBART SPECIFIC PARTS
G-119
G-375
THERMOSTATS
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
G-119
G-375
STYLE HI - POINTER ADJUSTMENT
STEMCO - 202 JK
103688-3
105190-1
WITH RESET
E-180
E-200
SWITCHES
STOCK
No.
E-180
E-200
E-308
E-308
SPECIFICATIONS
DPST, 20 AMP - 125V, 10A-250V
4-1/4" TAB TERMINALS
20 AMP - N.O. - N.C.
SCREW TERMINALS
15 AMP - N.O. - N.C.
1/4" TAB TERMINALS
REPLACES
COMMENTS
87711-148-1
TOGGLE SWITCH
87711-221
MICRO SWITCH
87711-68-1
3-1/2" SQUARE FLANGE HEATING
ELEMENTS WITH GASKET
STOCK
No.
REPLACES
C-117
C-118
C-119
C-120
C-121
C-122
B-196
87052-4
87052-5
87052-7
277255-1
277255-2
277255-3
67036
VOLTS
WATTS
208
240
5,000
480
208
240
10,000
480
GASKET ONLY
NOTE: HEATING ELEMENT MOUNTS FROM INSIDE THE TANK.
72
DISHWASHERS
HOBART SPECIFIC PARTS
B-139
B-720
B-140
PUMP SEALS
SHAFT SIZE
REPLACES
B-139
B-140
5/8"
1"
104329
104330
B-720
3/4"
274227-6
SANITATION
STOCK
No.
DRAIN AND WASH ARM O-RINGS
STOCK
No.
SIZE
REPLACES
COMMENTS
B-327
B-819
B-822
B-820
2-5/8" O.D.
1-3/4" O.D.
2-7/8" O.D.
2" O.D.
67500-118
67500-120
67500-119
67500-110
DRAIN C44, PW36
DRAIN C44A, PW36A
UPPER/LOWER WASH ARM C44, PW36
UPPER/LOWER WASH ARM C44A, PW36A
ROUND FLANGE HEATING
ELEMENT WITH GASKET
STOCK
No.
C-371
B-216
REPLACES
277983-2
119276
VOLTS
WATTS
208/240
5000
GASKET ONLY
C-371
B-216
3-1/2" SQUARE FLANGE HEATING
ELEMENT (OLD STYLE)
STOCK
No.
C-337
VOLTS
208/240
WATTS
5000
PHASE
3
73
BOOSTERS
HUBBELL BOOSTER WATER HEATERS
THE NEWLY DESIGNED HUBBELL BOOSTER HEATER HAS IMPROVED LONGEVITY - THE
ALL STAINLESS STEEL TANKS ARE DESIGNED, CONSTRUCTED AND STAMPED IN
STRICT CONFORMANCE TO TO ASME STANDARDS.
LOWER OPERATING COST - THE STAINLESS STEEL TANK IS ENCAPSULATED IN RIGID
POLYURETHANE FOAM INSULATION WHICH REDUCES HEAT LOSS BY MORE THAN 61%
COMPARED TO FIBERGLASS TYPE INSULATION USED BY OTHER BRANDS.
THE USER CAN EXPECT TO SAVE OVER 2000 KW/HRS PER YEAR IN OPERATING COSTS
OVER OTHER BRANDS.
REDUCED SERVICE AND MAINTENANCE COSTS - THE HUBBELL J SERIES BOOSTER
HEATER HAS BEEN DESIGNED TO SIMPLIFY SERVICE AND MAINTENANCE THROUGH
NUMEROUS ADVANCEMENTS. THE CONTROLLER IS A MAJOR STEP TOWARDS EASE OF
USE AND SERVICE. THE DIGITAL DISPLAY PROVIDES VISUAL ERROR INDICATION. IT HAS
A LEAK DETECTOR SYSTEM. ALL COMPONENTS ARE EASILY ACCESSED FOR MAINTENANCE WHEN THE FRONT COVER IS REMOVED.
• 10 YEAR FULL TANK WARRANTY
• ELECTRONIC CONTROL WITH DIGITAL DISPLAY
• LOW WATER CUT OFF
• EASY ACCESS TO ALL COMPONENTS
• BRONZE PRESSURE REDUCING VALVE
• TEMPERATURE/PRESSURE RELIEF VALVE
• RESETTABLE CIRCUIT BREAKERS (WHEN REQUIRED)
• TANK INSULATION FOAMED IN PLACE
• TANK AND HOUSING IS ALL STAINLESS STEEL
• AGENCY APPROVED - UL, EPH, ASME
• TEMPERATURE/PRESSURE GAUGE
MODELS
STOCK
No.
MODEL
*C-1240
J69RS
9
C-1241
C-1242
J612R
J615R
12
15
C-1243
C-1244
J636R
J645R
36
45
KW
VOLTAGE
PHASE
1-3
208
3
* C-1240 CAN BE FIELD CONVERTED TO 3 PHASE.
OTHER VOLTAGES AND WATTAGES AVAILABLE
74
BOOSTERS
HUBBELL SPECIFIC PARTS
J-184
G-766
F-482
H-1389
SANITATION
J-185
F-116B
F-122B
F-126B
F-128B
H-1395
H-330
C-1204, C-1205
C-1206, C-1207
C-1208, C-1209
C-1210
J SERIES ELECTRIC BOOSTER HEATER PARTS
STOCK
No.
SPECIFICATIONS
REPLACES
G-766
J-184
3" X 4-3/4"
1-1/4" X 3-3/4"
T1000
TD1000
CONTROL BOARD
DIGITAL DISPLAY MODULE
F-482
H-1389
1/4" X 2-3/4" WITH 22" CABLE
3/4"
P65
36C-304-02
PROBE WITH O-RING
BRONZE PRESSURE REDUCING VALVE
J-185
H-1395
1/2" MPT X 3" DIAL
3/4" MPT, 150 LBS
T405
100XL.75
30-240°F TEMP. PRESSURE GAUGE
RELIEF VALVE FOR (4-27 KW UNITS)
H-330
F-116B
3/4" MPT, 150 LBS
3P, 40A, 208/240V
40XL.75
C25DND330B
RELIEF VALVE FOR (30-58 KW UNITS)
F-122B
F-126B
3P, 50A, 208/240V
3P, 63A, 208/240V
C25DNF340B
C25FNF350B
F-128B
C-1204
3P, 75A, 208/240V
3000W 240V
C25FNF360B
C1315-12
C-1205
C-1206
4000W 208V
4000W 240V
C1315-3
C1315-14
C-1207
C-1208
5000W 208V
5000W 240V
C1315-4
C1315-16
C-1209
C-1210
6000W 208V
6000W 240V
C1315-5
C1315-17
DESCRIPTION
CONTACTOR
HEATING ELEMENT WITH O-RING
75
DISHWASHERS / BOOSTERS
HUBBELL AND INSINGER SPECIFIC PARTS
HUBBELL
THERMOSTATS
G-116
G-256
G-376
STOCK
No.
SPECIFICATIONS
G-116
G-256
G-376
REPLACES
COMMENTS
60" CAP - 3/8" STUFFING BOX
P59060
ROBERTSHAW THERMOSTAT
A19AAB-40
A19AAB-26
PENN THERMOSTAT
LOW WATER CUT OFF
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
F-101
230 VOLT
1C2D0
WARRICK CONTROL
HIGH TEMP CUT OUT
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
E-107
210ºF SURFACE MOUNT
301612
THERM-O-DISC
INSINGER
INSINGER PUMP SEAL
STOCK
No.
B-150
76
B-150
SHAFT SIZE
1-1/8"
REPLACES
UP-15, SSUP-15
DISPOSERS
IN-SINK-ERATOR REPLACEMENT UNITS AND SPECIFIC PARTS
COMMERCIAL WASTE DISPOSERS
STOCK
No.
PH
3/4
115/208/230
1
1-1/2
2
3
208/230/460
3
ISE
MODEL
HEIGHT
OUTLET
SIZE
SS-75
17"
1-1/2"
SS-150
18-7/16"
SS-200
SS-300
18-1/2"
22-3/4"
2"
3"
SANITATION
M-307
M-308
M-309
M-355
M-310
VOLTS
HP
NOTE: OTHER SIZES AND VOLTAGES AVAILABLE.
FLANGED SINK MOUNT
6-7/8"
BOLT
HOLES IN
UNATTACHED
RING
A-3730, A-4168, A-4169, A-4170
MEASURE
FROM ABOVE
( INSIDE BEND )
A-3731
5-1/2"
A-3732
MATCH YOUR SINK BOWL OR CONE IN THE PICTURE TO ORDER AN ADAPTER BELOW.
MOUNTING ADAPTERS
STOCK
No.
"A"
DIA.
"B"
DIA.
ISE NORMALLY USED
RING #
BY
COMMENTS
WASTE KING, ISE,
TOLEDO, NAT'L
A-3730
4-1/2" 5-1/8"
11327A
A-4168
A-4169
A-4170
A-3731
A-3732
A-3733
A-4171
A-3761
7"
6"
6-5/8"
6"
4-1/2"
6-5/8"
8"
-
11327G NATIONALHOBARTTOLEDO
11327K
BUS BOY
11599E
STANDARD ISE
7-1/2" OD LOOSE RING
11327D
WASTE KING
11327H
HOBART
"C" DIA. 6-7/8"
REQUIRES SUPPORT LEGS
11599H
SALVAJOR
11599K
MASTER
"D" DIM. 1"
12506
3-1/2 - 4" SINK OPENING
7-3/8"
6-7/8"
7-1/8"
6-1/2"
-
1"
RAISED
BEAD
A-3733
NO FLANGED MOUNT
A-4171
A-3761
77
DISPOSERS
IN-SINK-ERATOR SPECIFIC PARTS
BEARING SEAL KITS
STOCK
No.
A-1941
A-3762
A-1941
13080
A-3762
13281A
FOR MODELS SS50-ALL SUFFIX NUMBERS (EXCEPT
SS50-8, SS50-9) SS75, SS100, SS125, SS150-ALL
SUFFIX NUMBERS (EXCEPT SS150, SS150-1, SS150-2,
SS150-3) SS200-ALL SUFFIX NUMBERS (EXCEPT
SS200, SS200-1, SS200-2, SS200-3)
FOR MODELS 300, 500, 750, 1000
B-867
B-866
B-865
COMMENTS
REPLACES
B-868
B-871
B-870
B-872
B-750
B-869
B-503
GASKETS
78
STOCK
No.
REPLACES
DESCRIPTION
MODELS
B-865
B-866
1470
11459
TAILPIPE GASKET
50 - 125
150, 200
B-867
B-868
11457
11006
B-872
B-869
11007
11008
SHREDDER GASKET
150 - 200
300 - 1000
B-870
B-871
1010A
11292A
MOUNTING GASKET
BAFFLE GASKET
#5 SINK ADAPTER (FOR A3761)
ALL
B-750
B-503
11016
11005
MOUNTING GASKET
SPLASH GASKET
ALL
ALL
300 - 1000
50 - 125
DISPOSERS
IN-SINK-ERATOR SPECIFIC PARTS
A-3763
A-3767
A-3765
A-3766
A-3764
SANITATION
A-3768
A-3769
A-4007
A-4006
A-3771
A-3770
A-4004
A-4008
A-4005
A-4009
MECHANICAL COMPONENTS
STOCK
REPLACES
No.
DESCRIPTION
MODELS
A-3763
A-3764
1491
13997
FLANGE MOUNTING SCREW
PLASTIC OUTLET FLANGE
ALL
150, 200
A-3765
A-3766
13369
13998
OUTLET SCREW
3" PLASTIC OUTLET FLANGE
ALL
300-1000
A-3767
A-3768
11004
13709
MOUNTING FLANGE
ALL
50 - 200
A-3769
A-3770
12415
11757A
A-3771
A-4004
11757B
11252AZZ
STATIONARY SHREDDER
A-4005
A-4006
12944ZZ
11251ZZ
ROTOR SHREDDER
STATIONARY SHREDDER
A-4007
A-4008
12946ZZ
11250ZZ
ROTOR SHREDDER
STATIONARY SHREDDER
A-4009
13273ZZ
ROTOR SHREDDER
LOWER BEARING
LEG
300 - 1000
300 - 1000
50 - 200
50, 75, 100, 125
150, 200
300, 500, 750, 1000
79
DISHWASHERS
JACKSON SPECIFIC PARTS
G-784
G-257
G-593
G-786
G-258
G-738
G-785
THERMOSTATS
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
G-257
G-258
G-593
G-738
G-784
G-785
G-786
180ºF FIXED
150ºF FIXED
192ºF FIXED
195°F
150°F FIXED
180°F
190°F
5930-510-02-00
5930-510-01-00
6401-011-66-55
6401-021-83-83
6401-140-00-32
6401-140-00-33
5930-510-03-79
RINSE THERMOSTAT
WASH THERMOSTAT
FOR BOOSTER TANK
TEMPSTAR AND 200B
WASH THERMOSTAT
RINSE THERMOSTAT
RINSE TANK THERMOSTAT
F-203
F-356
F-348
F-273
E-230
E-268
E-616
E-398
F-439
F-496
WATER LEVEL CONTROLS, RELAYS AND PROBES
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
E-230
E-268
CURTIS - 120 VOLT
CURTIS - 220 VOLT
6680-200-02-19
6680-200-01-19
COMPLETE CONTROL ASSEMBLY
F-273
PLUG-IN RELAY
5945-305-01-19
E-398
25 SECOND DELAY - 120 VOLT
6680-200-07-21
F-203
-
6401-008-43-00
WITH DELAY FEATURE
PROBE FOR CONTROLS
E-616
F-348
4 SECOND DELAY - 2 PROBE
120V COIL
6680-200-01-93
5945-301-40-00
SOLID STATE CONTROL
25 AMP. RELAY - MODEL 24
F-356
F-439
208/240V COIL
3-1/4" LONG
5945-002-74-20
6680-200-02-68
30 AMP. RELAY - MODEL 10, 24
PROBE - TEMPSTAR
F-496
230V
6680-200-08-21
LIQUID LEVEL CONTROL
80
RELAY ONLY FOR E-230 AND E-268 OLD STYLE
COMPLETE CONTROL FOR MODEL 24B
DISHWASHERS
E-404
E-228
E-406
E-408
E-179
E-824
E-227
E-143
E-177
E-409
E-874
E-877
E-825
E-114
E-376
E-323
SANITATION
E-180
E-405
E-411
E-875
E-876
SWITCHES
STOCK
No.
SPECIFICATIONS
REPLACES
E-404
3-1/4" TABS, MOM. ON TOGGLE
5930-301-20-18
RINSE/FILL - MODELS 10, 50, 100
E-405
E-406
3 SCREWS, MOM. ON TOGGLE
3-1/4" TABS, MOM. ON ROCKER
5930-301-06-18
5930-301-44-00
RINSE/FILL - MODELS 10, 50
RINSE/FILL - MODEL 24
E-143
E-177
6-1/4" TABS, DP-DT TOGGLE
3 SCREWS, SP-DT TOGGLE
5930-301-21-18
5930-301-04-18
MANUAL WASH - MODELS 10, 44, 50, 100
E-114
E-323
6 SCREWS, DP-DT TOGGLE
2-1/4" TABS, SP-ST ROCKER
5930-301-12-18
5930-301-46-00
MANUAL WASH - MODELS 10, 50
MANUAL WASH - MODEL 24
E-180
E-824
4-1/4" TABS, DP-ST TOGGLE
SPDT
5930-301-22-18
5930-303-38-00
MASTER/HEAT - MODELS 10, 44, 50, 100
DOOR SWITCH - MODEL JP24
E-179
E-408
4 SCREWS, DP-ST TOGGLE
6 SCREWS, 3P-ST TOGGLE
5930-301-09-18
5930-301-39-00
MASTER - MODELS 10, 44, 50, 100
E-409
E-376
4-1/4" TABS, DP-ST LIGHTED ROCKER
3-1/4" TABS, SP-DT TOGGLE
5930-301-45-00
5930-301-23-18
HEAT - MODEL 24
START - MODELS 10, 50, 100
E-411
E-228
4-1/4" TABS, MOM. ON ROCKER
5-1/4" TABS, DP-DT LIGHTED ROCKER
5930-301-50-00
5930-301-43-00
START/MANUAL - MODEL 150
START - MODEL 24
E-227
E-825
3-1/4" TABS, INTERLOCK SWITCH
MAGNETIC
5930-303-26-17
6400-011-60-40
INTERLOCK - MODEL 24
DOOR SWITCH KIT - MODEL 200
E-874
E-877
N.O., 6FT SJTO CORD
N.C., 6FT SJTO CORD
5930-002-36-80
5930-111-68-44
DOOR SWITCH MODELS 200, 200B, LT
MAGNETIC SWITCH MODEL AJ SERIES
E-875
E-876
2 N.C. 2 N.O., PUSH-PUSH
1 N.C. 1 N.O., PUSH-MOM.
5930-002-43-44
5930-002-68-27
DELIME SWITCH MODEL JPX 300 SERIES
START CYCLE SWITCH MODEL JPX 300 SERIES
COMMENTS
81
DISHWASHERS
E-401
E-229
E-399
E-402
E-403
TIMERS
E-651
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
E-399
E-229
220 VOLT -3 CAM
115 VOLT - 3 CAM
5945-303-19-00
5945-303-17-00
FOR 10 AND 50 MODELS
FOR 24 OLD STYLE SERIES
E-401
E-402
115 VOLT - SOLID STATE
220 VOLT - 3 CAM
5945-307-01-00
5945-303-20-00
FOR 24B SERIES
FOR MODEL 100
E-403
E-651
220 VOLT - 4 CAM
S/S - 4-3/8" X 3-1/2"
5945-303-31-00
5945-307-07-93
FOR MODEL 150
FOR MODEL 200
E-873
240V - 6 CAM
5945-121-41-60
FOR MODELS JP24/F, JP24B/BF
E-873
DRAIN SOLENOID VALVE
STOCK
No.
H-1329
H-1329
SPECIFICATIONS
REPLACES
COMMENTS
230 VOLT
5700-002-23-21
FOR MODEL 24 SERIES
B-1019
DETERGENT PUMP HOSE
STOCK
No.
B-1019
82
REPLACES
DESCRIPTION
5700-111-35-29
3/16" ID X 3/8" OD X 8-1/4" LONG
DISHWASHERS
M-117
F-192
M-117-1
M-276
STOCK
No.
SPECIFICATIONS
REPLACES
M-117
115V - 1/2 H.P.
6401-010-81-00
M-117-1
F-192
M-276
COMMENTS
FOR MODEL 24
115V - START RELAY
6401-012-07-01
MOTOR ONLY
FOR M-117 MOTOR
115/230V 3/4 H.P.
6401-002-99-08
FOR MODEL JP-24
C-225
C-223
SANITATION
PUMP MOTOR ASSEMBLIES AND START RELAY
C-507
WASH TANK HEATING ELEMENTS
STOCK
No.
SPECIFICATIONS
C-223
240V - 750 WATTS
57000
10
C-225
C-507
240V - 1500 WATTS
240V - 1000 WATTS
58000
4540-100-18-00
100, 150
24
C-335
C-508
REPLACES
C-621
C-1086
MODELS
B-885
B-444
BOOSTER TANK HEATING ELEMENTS AND GASKETS
STOCK
No.
SPECIFICATIONS
REPLACES
MODELS
C-335
C-508
220V - 2500 WATTS - 10-1/2" LONG
220V - 2500 WATTS - 15" LONG
4540-100-17-10
4540-100-21-10
24, 50
10, 100, 44
C-621
C-1086
220V - 1200/2750 WATTS
220V - 8200 WATTS
4540-100-21-00
4540-111-43-21
150
JP-24
B-444
B-885
GASKET
5330-011-47-79
5330-200-02-70
150/JP24
300X, AJ SERIES
83
DISHWASHERS
B-684
B-258
B-142
B-292
B-256
B-1021
PUMP SEALS AND GASKET
STOCK
No.
SHAFT
SIZE
REPLACES
COMMENTS
B-142
B-258
5/8"
7/8"
5330-300-09-27
5330-300-06-27
PUMP SEAL FOR MODELS 10, 50, (100, 150 RINSE ONLY)
PUMP SEAL FOR MODELS 44, (100, 150 WASH ONLY)
B-684
B-292
5/8"
5330-300-07-27
5330-002-87-16
PUMP SEAL FOR MODEL 200
PUMP SEAL FOR MODEL JP24
-
5330-002-34-22
5330-002-81-83
PUMP SEAL FOR JPX 300 SERIES MODELS
GASKET FOR JPX 300 SERIES MODELS
B-256
B-1021
B-722
B-287
B-285
MODEL 24 PUMP PARTS
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
B-285
B-287
B-722
RUBBER (7 MOUNTING HOLES)
INCLUDES MOUNTING SCREW & O-RING
4-3/4" OD PUMP GASKET
5330-200-39-00
4320-300-25-00
5330-111-59-90
PUMP GASKET
PUMP IMPELLER
FOR MODEL JP24
J-179
J-180
J-183
THERMOMETERS
STOCK
No.
84
SPECIFICATIONS
REPLACES
COMMENTS
J-179
48"
6685-111-68-48
RINSE
J-180
J-183
96"
-
6685-111-68-49
6685-400-04-00
WASH
DIGITAL
DISHWASHERS
A-1949
A-1946, A-1948
STOCK
No.
REPLACES
A-1946
A-1948
A-1949
4730-017-15-05
4730-017-15-20
4730-017-15-10
SANITATION
STRAINERS
COMMENTS
LARGE OVERFLOW STRAINER FOR MODEL 10, 50
LARGE OVERFLOW STRAINER FOR MODEL 100, 150
SMALL PUMP INTAKE STRAINER FOR MODEL 10, 50 100, 150
WASH HEAD BEARINGS
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
A-778
SET OF 57
6401-100-03-24
FOR MODELS 10, 24, 50, 100, 150
A-3772
A-925
A-3625
B-290
A-3626
A-3947
DOOR PARTS
STOCK
No.
A-925
B-290
A-3625
A-3626
A-3772
A-3947
SPECIFICATIONS
REPLACES
COMMENTS
8-1/4" LONG
8" LONG
23-1/2" LONG
5340-109-19-00
5330-200-27-00
5340-011-44-58
5700-011-44-41
5700-111-33-59
5330-600-01-00
DOOR SPRING
DOOR GASKET
DOOR SPRING
LATCH ASSY
DOOR GLIDE
DOOR EDGE
MODELS
24
JP24
AJ SERIES, 300X
100B, 100PRB
85
DISPOSERS
MASTER DISPOSERS
SERIES D - 6" ROTOR DISPOSERS
APPLICATION:
SALAD PREP AREAS AND AREAS OF SMALL VOLUME AND LIGHT WASTE.
FEATURES:
6" DIAMETER ROTOR/TURNTABLE WITH 2 INTEGRAL IMPACT BREAKERS
CONSTRUCTED OF HARDENED DUCTILE STEEL ALLOY FOR LONG LIFE USE.
MATCHING 45 SIZING RING WITH 20 GRIND TEETH CONSTRUCTED FOR HARDENED
DUCTILE STEEL ALLOY. 4-3/4" THROAT OPENING. LOW BODY CHAMBER WITH FORCE
FEED DIRECTIONAL DEFLECTORS. BOLT ON GRIND CHAMBER FOR EASE OF
REMOVING DISPOSER DURING SERVICING. CAST IN DISCHARGE FLANGE. WATER
INLET IN WASTE CHAMBER WALL. BOLT ON "CONTINUOUS DUTY" MOTOR FOR EASY
REMOVAL. EXCLUSIVE SHAFT EXTENSION WITH 1/2" WRENCH FLATS TO
EXTERNALLY DE-JAM FOREIGN MATTER WITHOUT SPECIAL TOOLS. HEAVY CAST
ALLOY CONSTRUCTION PROVIDING AN EXTRA LONG LIFE DISPOSER.
MOTOR DATA:
CONTINUOUS DUTY. 1750 RPM, DUAL VOLTAGE, DUAL DIRECTIONAL, AND
OVERLOAD PROTECTION IN MOTOR. 208-230/460/3 (3/4, 1, 1-1/2 AND 2 H.P.)
115/230/1 (3/4, 1, 1-1/2 AND 2 H.P.)
LOW CHAMBER
SERIES C - 8" ROTOR DISPOSERS
APPLICATION:
GENERAL FOOD WASTE IN SMALL OR MEDIUM RESTAURANTS. SALAD PREP AREAS,
DISHWASHING AND POT SINK AREAS OF AVERAGE INSTITUTIONAL KITCHENS.
FEATURES:
8" DIAMETER ROTOR/TURNTABLE WITH EXCLUSIVE ADJUSTABLE 45º ANGLE AND 4
INTEGRAL IMPACT BREAKERS CONSTRUCTED OF HARDENED DUCTILE STEEL ALLOY
FOR LONG LIFE USE. MATCHING 45º SIZING RING WITH 24 GRIND TEETH
CONSTRUCTED FOR HARDENED DUCTILE STEEL ALLOY. EXCLUSIVE 8-1/4" THROAT
OPENING TO ALLOW FOR FASTER FEEDING. FLEXIBLE NEOPRENE COLLAR TO
ELIMINITE VIBRATION AND INCREASE EASE OF INSTALLATION. VERSATILE LOW
BODY OR OFFSET GRIND CHAMBERS WITH FORCE FEED DIRECTIONAL DEFLECTORS.
BOLT ON GRIND CHAMBER ALLOWS REPLACEMENT OF ALL WEARING PARTS
WITHOUT DISTURBING PLUMBING AND ELECTRICAL CONNECTIONS. BOLT ON
DISCHARGE FLANGE FOR EASY REMOVAL. ADJUSTABLE LEGS TO LEVEL DISPOSER
AND MEET DRAIN STUB. BOLT ON "CONTINUOUS DUTY" MOTOR FOR EASY
LOW CHAMBER
MOTOR DATA:
OFF-SET CHAMBER
86
CONTINUOUS DUTY, 1750 RPM, DUAL VOLTAGE AND DUAL DIRECTIONAL
208-230/460/3 (1-1/2, 2, 3, AND 5 H.P.) 115/230/1 (1-1/2 H.P.)
DISPOSERS
MASTER DISPOSERS
SERIES B - 10" ROTOR DISPOSERS
DISHWASHING AREAS AND ALL FOOD PREP AREAS OF LARGE RESTAURANTS AND
INSTITUTIONAL KITCHENS.
FEATURES:
10" DIAMETER ROTOR/TURNTABLE WITH EXCLUSIVE ADJUSTABLE 45º ANGLE AND 6
FOR LONG LIFE USE. MATCHING 45º SIZING RING WITH 24 GRIND TEETH
CONSTRUCTED FOR HARDENED DUCTILE STEEL ALLOY. EXCLUSIVE 8-1/4" THROAT
OPENING TO ALLOW FOR FASTER FEEDING. FLEXIBLE NEOPRENE COLLAR TO
ELIMINATE VIBRATION AND INCREASE EASE OF INSTALLATION. VERSATILE LOW
BODY OR OFFSET GRIND CHAMBERS WITH FORCE FEED DIRECTIONAL DEFLECTORS.
BOLT ON GRIND CHAMBER ALLOWS REPLACEMENT OF ALL WEARING PARTS
DISCHARGE FLANGE EASY REMOVAL. ADJUSTABLE LEGS TO LEVEL DISPOSER AND
MEET DRAIN STUB. BOLT ON "CONTINUOUS DUTY" MOTOR FOR EASY REMOVAL.
EXCLUSIVE SHAFT EXTENSION WITH 3/4" WRENCH FLATS TO EXTERNALLY DE-JAM
FOREIGN MATTER WITHOUT SPECIAL TOOLS. HEAVY CAST ALLOY CONSTRUCTION
PROVIDING AN EXTRA LONG LIFE DISPOSER.
LOW CHAMBER
MOTOR DATA:
CONTINUOUS DUTY, 1750 RPM. DUAL VOLTAGE AND DUAL DIRECTIONAL
208-230/460/3 (3, 5, 7-1/2 AND 10 H.P.)
OFF-SET CHAMBER
SERIES A - 15" ROTOR DISPOSERS
APPLICATION:
MASS FEEDING INSTITUTIONS AND CENTRAL WASTE ROOMS, SALAD COMMISSARIES
OR LARGE PRODUCE PREP STATIONS.
FEATURES:
15" DIAMETER ROTOR/TURNTABLE WITH EXCLUSIVE 2 PIECE DESIGN AND 10
FOR LONG LIFE USE. MATCHING SIZING RING WITH 40 GRIND TEETH CONSTRUCTED
FOR HARDENED DUCTILE STEEL ALLOY. EXCLUSIVE 8-1/4: THROAT OPENING TO
ALLOW FOR FASTER FEEDING. FLEXIBLE NEOPRENE COLLAR TO ELIMINATE
VIBRATION AND INCREASE EASE OF INSTALLATION. VERSATILE LOW BODY OR
OFFSET GRIND CHAMBERS ALLOWS REPLACEMENT OF ALL WEARING PARTS
DISCHARGE FLANGE FOR EASY REMOVAL. ADJUSTABLE LEGS TO LEVEL DISPOSER
AND MEET DRAIN STUB. BOLT ON "CONTINUOUS DUTY" MOTOR FOR EASY
MOTOR DATA:
CONTINUOUS DUTY, 1750 RPM, DUAL VOLTAGE AND DUAL DIRECTIONAL
208-230/460/3 (5, 7-1/2 AND 10 H.P.)
LOW CHAMBER
OFF-SET CHAMBER
87
SANITATION
APPLICATION:
DISPOSERS
MASTER DISPOSERS
DISPOSER CROSS REFERENCE
MASTER
SERIES
HORSE
POWER
D
3/4
BUS BOY 750, HOBART FD2/75-4, IN-SINK-ERATOR SS75, RED GOAT H34, WASTE KING 750-3
D
D OR C
1
1-1/2
BUS BOY 1000, HOBART FD2/125-4, IN-SINK-ERATOR SS100, RED GOAT H1, SALVAJOR 100, WASTE KING 1000-3
D OR C
C OR B
2
3
BUS BOY 2000, HOBART FD2/200-4, IN-SINK-ERATOR SS200, RED GOAT A2, SALVAJOR 200, WASTE KING 2000-3
C, B OR A
B OR A
5
7-1/2
BUS BOY 5000, HOBART FD2/500-1, IN-SINK-ERATOR SS500, RED GOAT B5, SALVAJOR 500, WASTE KING 5000-3
B OR A
10
IN-SINK-ERATOR SS1000, RED GOAT C10, WASTE KING 10000-3
REPLACES MFG. SERIES
BUS BOY 1500, HOBART FD2/150-4, IN-SINK-ERATOR SS150, RED GOAT A112, WASTE KING 1500-3
BUS BOY 3000 4000, HOBART FD2/300-2, IN-SINK-ERATOR SS300, RED GOAT A3, B3 SALVAJOR 300, WASTE KING 3000-3
BUS BOY 7500, IN-SINK-ERATOR SS750, RED GOAT B712, C712, SALVAJOR 750
NOTE: OUR CUSTOMER SERVICE REPRESENTATIVES CAN RECOMMEND A COMPLETE DISPOSER
PACKAGE FOR NEW OR REPLACEMENT INSTALLATIONS. CALL FOR PRICING. PARTS AVAILABLE FOR
ALL MASTER DISPOSERS.
NOTE: SEE PAGE 823 FOR ADDITIONAL SIZING INFO.
BAFFLE SPLASH GUARD
88
STOCK
No.
COMMENT
B-504
FOR ALL MODELS
GLASS WASHERS
MOYER DIEBEL/CHAMPION SPECIFIC PARTS
G-454
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
G-454
RANCO - WITH
STUFFING BOX
0507323
FOR MODEL DF AFTER S/N 16231, SW AFTER S/N 5181, MD
SANITATION
THERMOSTAT
A-3760
E-653
H-424
H-426
B-862
B-863
A-2933
COMPONENT PARTS
STOCK
No.
DESCRIPTION
REPLACES
COMMENTS
H-424
H-426
E-653
A-2933
A-3760
B-862
B-863
SOLENOID VALVE
REPAIR KIT
TIMER SWITCH
HOOD DISCONNECT ASSY
UPPER SPRAY ARM SUPPORT
SIDE DOOR GASKET
TOP DOOR GASKET
0502783
0502811
0501379
0703702
0508541
0508543
0508544
3/8"-240V, FOR MODEL DF, SW
REPAIR KIT FOR H-424
ROLLER ARM MICRO SWITCH
FOR MODELS SW400, SW600
FOR 501 SERIES
HEATING ELEMENTS
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
C-746
C-747
240V, 3000W - 11-1/2" LONG
240V, 3000W - 7-1/2" LONG
0507315
0501330
FOR MODEL DF AFTER S/N 16231, SW AFTER S/N 5181, MD
FOR MODEL DF BEFORE S/N 16231, SW BEFORE S/N 5181
89
GLASS WASHERS
MOYER DIEBEL/CHAMPION SPECIFIC PARTS
A-2932
M-251
M-182
A-3150
A-3151
CONVEYOR COMPONENTS
STOCK
No.
M-182
M-251
A-2932
A-3150
A-3151
SPECIFICATIONS
0507145
0501345
0501899
0501793
0501590
230 VOLT
16 TOOTH
-
COMMENTS
REPLACES
DRIVE MOTOR FOR MODEL DF AFTER S/N 15636 W/ POLY
DRIVE MOTOR SW400, SW600
CHAIN FOR MODELS SW400, SW600
MOTOR SPROCKET - LESS SET SCREWS
CONVEYOR BELT LINK
M-183
F-274
WATER PUMP ASSEMBLY AND CAPACITOR
STOCK
No.
M-183
F-274
SPECIFICATIONS
REPLACES
COMMENTS
208/230V, 1/12 H.P.
0507313
MODEL DF AFTER S/N 16231, SW AFTER S/N 5181
-
0507314
CAPACITOR FOR M-183
TEMPERATURE GAUGE
J-154
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
J-154
2" DIAL - 8" STEM
0501600
FOR MODEL DF, SW
CURTAINS
B-533
B-534
90
STOCK
No.
SPECIFICATIONS
REPLACES
B-533
B-534
24-1/2" X 7"
17-1/2" X 8-1/2"
0501625
0501743
COMMENTS
FOR MODEL DF
FOR MODEL SW
SALVAJOR AND STERO SPECIFIC PARTS
SALVAJOR
DISPOSER SPLASH GUARD
STOCK
No.
COMMENT
B-505
FITS 7-1/2" HOLE
SANITATION
STERO
THERMOSTATS
STOCK
SPECIFICATIONS REPLACES
No.
COMMENTS
G-456
G-456
G-457
15A 125-250V
205ºF LIMIT
P651185
P655776
FENWAL THERMOSTAT
RESET LIMIT
G-783
10A 120V/5A 240V
P651183
THERMOSTAT OPEN ON RISE
G-457
G-783
IGNITER AND FLAME SENSOR
STOCK
No.
REPLACES
DESCRIPTION
F-494
P495798
HOT SURFACE IGNITER
F-495
P496037
FLAME SENSOR
F-494
F-495
E-419
E-418
WATER FLOAT AND SWITCHES
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
E-418
5A. 120-240 V
C101005
FLOAT SWITCH ASSEMBLY
E-419
E-420
INCLUDES ACTUATOR ROTOR
A102054
B104274
SWITCH ASSY FOR E-418
REED SWITCH
B103273
A104275
MAGNET FOR REED SWITCH
E-749
A-4178
WITH WIRE LEADS
2-3/8" X 5/8"
DOOR SAFETY SWITCH
E-420
E-749
A-4178
PEG LINK
STOCK
SPECIFICATIONS
No.
A-2790
1 LEG
REPLACES
A-2790
C595631
91
DISHWASHERS
STERO SPECIFIC PARTS
C-751, C-752
C-753
C-750
B-535
HEATING ELEMENTS AND GASKET
STOCK
No.
REPLACES
DESCRIPTION
C-750
C-751
115V 2000 WATTS
208V 5000 WATTS
P551134
P551131
C-752
C-753
240V 5000 WATTS
480V 5000 WATTS
P551132
P551133
B-535
2-5/8" SQUARE
A571114
B-292
B-143, B-144
B-135
COMMENTS
HEATING ELEMENT
GASKET ONLY
B-1015
B-1018
B-1017
PUMP SEALS AND GASKETS
STOCK
No.
SHAFT SIZE
REPLACES
COMMENTS
B-292
5/8"
P571030
FOR PRICE PUMP
B-143
B-144
3/4"
1"
P571696
P571697
FOR 1 H.P. MOTORS
FOR 1-1/2, 2, 3 H.P. MOTORS
B-135
B-1015
5/8"
P572083
B571756
FOR GOULD PUMP
FOR FLIGHT TYPE MACHINE
B-1017
B-1018
-
A573287
B571334
FOR GOULD PUMP
FOR PRICE PUMP
TEMPERATURE AND PRESSURE GAUGES
STOCK
No.
J-189
J-190
SPECIFICATIONS
REPLACES
COMMENTS
J-189
84" 100-220ºF
P651135
WASH/RINSE
J-190
60 PSI 2-1/2" DIAL
P651136
WITH VALVE
FINAL RINSE SPRAY JET
92
STOCK
No.
REPLACES
COMMENTS
A-3389
B503297
.073 HOLE FOR SCT, SET MODELS
DISHWASHERS
TOASTMASTER/TOLEDO SPECIFIC PARTS
G-327
G-119
G-328
STOCK
No.
SPECIFICATIONS
REPLACES
G-119
G-327
STYLE HI - POINTER ADJUSTMENT
STYLE K (RSW)
A14413/A14456
A26213
THERMOSTAT WITH RESET
HEATER THERMOSTAT
G-328
THERM-O-DISC
A26214
HEATER HIGH LIMIT CUT OUT
E-177
SANITATION
THERMOSTATS
COMMENTS
E-113
E-151
SWITCHES
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
E-177
E-151
SPDT, 10A/250V, 20A/125V
15 AMP, METAL HOUSED MICRO
A13055
A21919
FILL SWITCH
RINSE SWITCH
E-113
SPST
A26215
HEATER SWITCH
HEATING ELEMENT ASSEMBLY
STOCK
No.
REPLACES
VOLTAGE
WATTAGE
PHASE
C-278
A29703
208
7500
3
NOTE: SEE PAGE 40 FOR OTHER VOLTAGES AND WATTAGES.
93
DISHWASHERS
TOASTMASTER/TOLEDO/VULCAN HART SPECIFIC PARTS
VULCAN HART
G-259
THERMOSTAT
STOCK
No.
SPECIFICATIONS
REPLACES
COMMENTS
G-259
STYLE K - 72" CAPILLARY
998298-11
FOR SERIES A44, A54, A64, A81, CP2, CP3, HP3
E-415
E-144
E-417
SWITCHES
STOCK
No.
E-144
E-415
E-417
SPECIFICATIONS
REPLACES
COMMENTS
DPDT ON-OFF-ON TOGGLE
SPDT ON-OFF-MOM. ON
SWITCH WITH ACTIVATOR
& MOUNTING BASE
906446
906445
AUTOMATIC CYCLE SERIES CU16, R16, 3D20, CD20
WASH/RINSE CYCLE SERIES CU16, R16, 3D20, CD20
997064
RINSE CYCLE SERIES A44, A54, A64, A81
WOULD YOU RATHER FAX IN YOUR ORDER THAN CALL?
NO PROBLEM
TOLL FREE FAX IN UNITED STATES: 800-253-8499
INTERNATIONAL CUSTOMERS FAX: 860-738-7104
94
DISHWASHERS
VULCAN HART SPECIFIC PARTS
STOCK
No.
REPLACES
VOLTS WATTS
C-415
905388-11
208
C-416
C-418
905388-12
905440-11
240
208
4800
SANITATION
HEATING ELEMENTS
MODELS
FOR SERIES 3D20, CD20, A44, A54, A64, A81, CP2, CP3, HP3
3300
B-150
B-147
PUMP SEALS
STOCK
No.
B-147
B-150
SHAFT SIZE
REPLACES
MODELS
5/8"
1-1/8"
906410
997522
FOR SERIES 3D20, CD20
DRAIN O-RING
STOCK
No.
SPECIFICATIONS
REPLACES
MODELS
B-532
1-1/4" ID
996103
SERIES 3D20, CD20, A44, A54, A64, A81
95

dishwashers/disposers

Transcription

Similar documents

Patterns by SEW-GO - Outdoor Wilderness Fabrics

ovens/ranges

fryers - AllPoints

Sect. 2 - Heating Elements

SCM Catalog 030207.indd - Find collet chucks, collets, end mill