The Fight Director Line

Transcription

Welcome to StageSwords.com, a centralized resource for stage combat
weapons personally approved by The Fight Director John Davis. John has been a fight
director and period weapons expert for over twenty years, and he brings that expertise
to this selection of fine stage combat and re-enactment weaponry.



Due to the nature of construction, small variations will occur from piece to piece.
All products are warranted against all manufacturers’ defects (workmanship and
or materials) for a period of one year from the date of customer purchase. This
warranty applies only when the product is used under normal conditions for
which the product is designed, and does not apply to damage related to accident,
misuse, improper care, negligence, and normal and/or excessive wear and tear.
Items in stock shipped within two weeks
For the SCA and other re-enactment groups, the Fight Director weapons may be
mounted with Schlaeger or rapier blades, with rounded end and rubber tips, for an
additional $20 over list price. Also visit our Hanwei Re-Enactment Swords page for
more SCA options.
If you have any questions or have a special request, contact us at
[email protected].
Contents
The Fight Director Line....................................................................................................................................... 5
Basic Rapier FDR01 ........................................................................................................................................ 6
Musketeer Rapier FDM01 .............................................................................................................................. 7
Smallsword FDSS01 ........................................................................................................................................8
Venetian Sword FDV01................................................................................................................................... 9
Hanwei Items .................................................................................................................................................... 10
Japanese/Chinese ......................................................................................................................................... 10
Practical Katana SH1070 .......................................................................................................................................... 10
Practical Gongfu Broadsword SH2063 ..................................................................................................................... 11
Medieval European ....................................................................................................................................... 12
Practical Single-Hand Sword SH2046 ......................................................................................................................12
Practical Hand-and-a-Half Sword SH2106...............................................................................................................13
Blunt Tinker 9th Century Viking Sword SH2409 .....................................................................................................14
Practical Viking Sword SH2047 ................................................................................................................................ 15
Blunt Tinker Longsword SH2395 ..............................................................................................................................16
Blunt Tinker Bastard Sword SH2401 ........................................................................................................................ 17
Blunt Tinker Early Medieval Sword SH2405............................................................................................................18
Blunt Tinker Norman Sword SH2427 .......................................................................................................................19
Practical Norman Sword SH2326 ............................................................................................................................ 20
9/11
www.stageswords.com
2
Renaissance European Swords .................................................................................................................... 21
Practical Basket Hilt Broadsword SH2059 ...............................................................................................................21
Practical Backsword SH2075 .................................................................................................................................... 22
Practical Mortuary Hilt Sword SH2076 ................................................................................................................... 23
Practical Side Sword SH2279 ................................................................................................................................... 24
SH2428 Practical Bastard Sword ............................................................................................................................. 25
Fencing Rapier Musketeer Blade.............................................................................................................................. 26
Practical Schlaeger Rapier SH1099 and SH1098 .................................................................................................... 27
Practical Cup Hilt Rapier SH2261 ............................................................................................................................ 28
Washington Blade SH2325 ....................................................................................................................................... 29
Practical Federschwert Longsword SH2333 ............................................................................................................ 30
Cutlass SH2374 ..........................................................................................................................................................31
Rapier – Bone Grip SH1092 (Sharp)........................................................................................................................ 33
Torino Rapier SH2204 (Sharp) ................................................................................................................................ 34
Antiqued Torino Rapier SH2204N (Sharp) ............................................................................................................. 35
Solingen Rapier SH2205 (Sharp) ............................................................................................................................. 36
Antiqued Solingen Rapier SH2205N (Sharp) .......................................................................................................... 37
Gustav Rapier SH2206 (Sharp) ................................................................................................................................ 38
Antiqued Gustav Rapier SH2206N (Sharp)............................................................................................................. 39
Fencing Main Gauche SH1033 ................................................................................................................................. 40
Wood Grip Main Gauche SH2117 (Sharp).................................................................................................................41
Bone Grip Main Gauche SH2197 (Sharp) ................................................................................................................ 42
Solingen Main Gauche SH2208 (Sharp) .................................................................................................................. 43
Antiqued Solingen Main Gauche SH2208N (Sharp)............................................................................................... 44
Torino Main Gauche SH2207 (Sharp) ..................................................................................................................... 45
Antiqued Torino Main Gauche SH2207N (Sharp) .................................................................................................. 46
Gustav Main Gauche SH2209 (Sharp) ..................................................................................................................... 47
Antiqued Gustav Main Gauche SH2209 (Sharp)..................................................................................................... 48
Re-Enactment Swords ..................................................................................................................................49
Practical Single-Hand Sword SH2046 ..................................................................................................................... 49
Practical Hand-and-a-Half Sword SH2106.............................................................................................................. 50
Blunt Tinker 9th Century Viking Sword SH2409 ..................................................................................................... 51
Practical Viking Sword SH2047 ............................................................................................................................... 52
Practical Basket Hilt Broadsword SH2059 .............................................................................................................. 53
Practical Norman Sword SH2326 ............................................................................................................................ 54
Blunt Tinker Norman Sword SH2427 ...................................................................................................................... 55
SH2428 Practical Bastard Sword ............................................................................................................................. 56
Practical Backsword SH2075 .................................................................................................................................... 57
Practical Mortuary Hilt Sword SH2076 ................................................................................................................... 58
Cutlass SH2374 ......................................................................................................................................................... 59
Sabres............................................................................................................................................................ 60
Pecoraro Sabre SH2199 ............................................................................................................................................ 60
9/11
www.stageswords.com
3
Radaelli Sabre SH2200..............................................................................................................................................61
Hutton Sabre SH2201 ............................................................................................................................................... 62
Polearms ........................................................................................................................................................63
Ash Pole OX005 ........................................................................................................................................................ 63
Short Bladed Spearhead XB0049............................................................................................................................. 64
Medium Bladed Spearhead XB0050 ........................................................................................................................ 64
Throwing Spearhead XB0051 ................................................................................................................................... 65
Thrusting Spearhead XB0053 .................................................................................................................................. 65
Replacement Blades ......................................................................................................................................66
Blunt Tinker Longsword OH2397 ............................................................................................................................ 66
Blunt Tinker Bastard OH2403 ................................................................................................................................. 66
Blunt Tinker Early Medieval OH2407...................................................................................................................... 67
Tinker 9th Century Viking OH2420 .......................................................................................................................... 67
Practical Main Gauche Blunt OH2256 ..................................................................................................................... 68
Practical Rapier OH2255 .......................................................................................................................................... 68
Accessories ....................................................................................................................................................70
Rapier Belt OK-H60............................................................................................ Error! Bookmark not defined.
Sword Baldric OL300.......................................................................................... Error! Bookmark not defined.
Broadsword Belt ........................................................................................................................................................ 70
Back Scabbard ..................................................................................................... Error! Bookmark not defined.
Baldric OL300 ..................................................................................................... Error! Bookmark not defined.
AB0116 Plain Buckler ................................................................................................................................................ 70
AB0119 Plated Buckler ............................................................................................................................................... 71
AB0122 Fluted Buckler .............................................................................................................................................. 71
9/11
www.stageswords.com
4
The Fight Director Line
Stage combat weapons designed by John C. Davis, a professional fight director since 1984.
John is an expert hilt-smith who creates high-quality hilts that will hold up under the rigors of
stage combat and re-enactment, and then mounts these hilts to stage combat proven blades.
These are not castings or welded pieces, but are solid steel, rugged and dependable weapons that
will withstand the test of time. Guards and handles carry a lifetime guarantee.
Re-enactor/SCA note: All blades may be made to comply with regulations. For an additional
$20 over list price, the weapon will be mounted with an oval Schlaeger or rapier blade with
rounded end and rubber tip.
The Fight Director also produces custom swords! Don’t hesitate to contact us to discuss your
specific needs.
Examples:
9/11
www.stageswords.com
5
Basic Rapier FDR01
Our basic rapier is designed
after the popular Capidomonte
style sold by other sword
vendors. It features a heavy
duty epee blade and all steel
fittings. Its solid acetal plastic
handle acts as a lock washer
keeping the weapon tight.
Recently sold at the I.O.S.P.
Paddy Crean Art of the Sword
Workshop, this sword has been
adopted by several teachers for
their own arsenals and is
currently in a production of
"The Three Musketeers" in
London.
Cost: $225.00
With rayskin handle: $245.00
SCA version, regular handle: $245.00
SCA version with rayskin handle: $265.00
Matching Dagger also available (FDMD).
May be mounted with standard blunt blade or
SCA version.
Cost: $145
With basic handle: $165.00
With rayskin handle: $185.00
Re-enactment version same pricing.
9/11
www.stageswords.com
6
Musketeer Rapier FDM01
This musketeer rapier with its
Fleur de Lis pierced shell is
designed for Cavalier period plays
and rings beautifully when struck.
Like the basic rapier there are no
welds or castings in this sword,
which is designed for lasting
years of stage combat use. The
sweeping quillions end with a
complimentary fleur de lis design
making this an elegant piece of
weaponry. Its solid acetal plastic
handle acts as a lock washer
keeping the weapon tight. Comes
with a heavy duty Epee blade.
This blade is also is currently in
'The Three Musketeers' in
London.
Cost: $250.00
With wire wrap handle as shown: $270.00
SCA version with basic handle: $270.00
SCA version with wire wrap handle: $290.00
Matching Dagger also available (FDMD). May be
mounted with standard blunt blade or SCA version.
Cost: $145
With wire wrap handle: $165.00
9/11
www.stageswords.com
7
Smallsword FDSS01
Designed from the smallswords of
the eighteenth century, this
smallsword has a bilobate sheel
which rests between the Pas'
danes. It's constructed with all
steel fittings (no castings) and a
properly shortened 32" epee
blade. It is very tip responsive for
true smallsword technique. This
sword comes with a steel wire
wrapped handle over solid acetal
plastic (no cracking like wood).
Cost: $250.00
With wire wrap handle as shown:
$270.00
Napoleonic Smallsword FDN01
Our Napoleonic Smallsword, with
the classic sweeping sail-shaped
bilobate shell and sans knuckle
bow design, allows for the most
intricate smallsword technique.
Its solid acetal plastic handle acts
as a lock washer keeping the
weapon tight. Comes with a heavy
duty Epee blade shortened to 32".
Cost: $250.00
With wire wrap handle as shown:
$270.00
SCA version with basic handle:
$270.00
SCA version with wire wrap
handle: $290.00
9/11
www.stageswords.com
8
Venetian Sword FDV01
Coming soon!
Venetian Rapier - This rapier is our simplest style. It is designed from early rapier styles with a
simple cross guard and Pas'danes. It's Cocobolo wood handle is very hard to resist cracking, and
has a beautiful dark grain that enhances the piece. This sword has no welds or castings and
comes with a heavy duty epee blade.
Cost: $200
Matching dagger: $145
9/11
www.stageswords.com
9
Hanwei Items
Japanese/Chinese
Practical Katana SH1070
The ever-popular Practical Katana gives the martial artist the opportunity to own and use a
Hanwei sword at the cost of an economy sword. The blades are forged and differentially
hardened, using the same process as the more expensive blades and producing an HRC60 edge
and HRC40 back. The temper line is authentic and prominent. Cost savings are effected by using
fittings which, while making no claims to authenticity, are very strongly built to withstand the
rigors of cutting exercises in the dojo.
Specifications:
Overall: 39 1/2“
Blade Length: 27 1/4“
Handle Length: 11 1/4”
Weight: 2lb 3oz
Point of Balance: 5 3/4"
Width at Guard: 1.22"
Width at Tip: .87"
Thickness at Guard: .27"
Thickness at Tip: .18"
Sori: 3/4"
Cost: $242.00
Key Features



9/11
High carbon forged blade
Differentially tempered
Fully functional
www.stageswords.com
10
Practical Gongfu Broadsword SH2063
The Practical Gongfu Broadsword sword is a further extension of our “Practical” Series.
Featuring a distal-tapered high carbon steel blade, wrapped grip and steel fittings, the saber is a
traditional ox-tail design. The textured wooden scabbard is designed with a slotted opening,
which makes both for easy sheathing and graceful lines. In line with other swords in the
“Practical” series, the Practical Gongfu Broadsword is very affordable.
Specifications:
Overall: 33 1/4“
Blade Length: 28“
Weight: 1lb 10oz
Point of Balance: 8"
Width at Tip: 2.4"
Cost: $183.00
Key Features
 distal-tapered high carbon steel blade
 wooden scabbard
 black finish
9/11
www.stageswords.com
11
Medieval European
Practical Single-Hand Sword SH2046
The Practical Single-Hand Sword is based on the Marshall sword, so named for one of England’s
finest knights of the latter half of the 12th century. The sword is classically styled, with a
cruciform hilt, wheel pommel and a ridged-and-fullered blade that is both stiff and surprisingly
light. With a weight of less than 2 ½ lbs., the sword can be wielded forcefully without undue
wear and tear on the arm.
Specifications:
Overall: 36 1/2“
Blade Length: 30“
Weight: 2lb 7oz
Thickness at Guard: .230
Cost: $123.00
Key Features



9/11
Made for the reenactor
Authentic look and
feel
Complies with safety
requirements
www.stageswords.com
12
Practical Hand-and-a-Half Sword SH2106
The Practical Hand-and-a Half sword is based on the Albrecht sword, a classic design from the
early part of the 15th century, with a simple cruciform hilt, flattened diamond-section blade and
typical hand-and-a-half grip. With a weight of just 3 ¼ lbs. it handles very well without tiring the
player during a long day in the field.
Specifications
Overall: 43 3/4“
Blade Length: 34“
Weight: 2lb 12oz
Point of Harmonics: 23"
Width at Tip: .51"
Cost: $140.00
Key Features



9/11
Fullered blade
Authentic look and feel
www.stageswords.com
13
Blunt Tinker 9th Century Viking Sword SH2409
While not a direct copy of any particular sword, the Viking sword design was inspired by
historical examples from the early 9th Century, most notably finds from the area around
Trondheim, Norway, where the circular indentation hilt decoration was popular.The scabbards
are provided with suspension points and a period chape, giving the sheathed sword a very
attractive appearance. The construction of the Viking "pair" differs from other swords in the
Tinker series inasmuch as they are tang-riveted (peened) in period fashion at the pommel,
primarily to satisfy Viking re-enactment requirements, and the blunt blade design is very much
directed towards re-enactment rather than sparring.
Specifications:
Overall: 37 1/2"
Blade Length: 30 1/8"
Handle Length: 6 1/2"
Weight: 2 lb 12 oz
Cost: $290.00
Key Features



9/11
5160 Marquenched Spring Steel
Peened Pommel
Tinker Approved
www.stageswords.com
14
Practical Viking Sword SH2047
The Practical Viking sword is based on our Godfred sword, whose design originated in 9th
century Scandinavia. The lobate pommel and down-turned guard are typical of Viking swords of
the period, as is the broad blade with its deep, full-length fullers. The sword is well-balanced
and, with a weight slightly over 2 lbs., it is very quick.
Specifications:
Overall: 33 1/2“
Blade Length: 28“
Weight: 2lb 2oz
Cost: $114.00
Key Features



9/11
Made for the re-enactor
Complies with safety requirements
www.stageswords.com
15
Blunt Tinker Longsword SH2395
Our Tinker Longswords (Oakeshott Type XVIIIa) provide the WMA practitioner with a fast,
well-balanced pair of swords that will perform beautifully in skilled hands. The Blunt Trainer
features nearly identical handling to that of its sharp companion, but with thick edges and a
rounded tip for safe sparring practice.
Specifications:
Overall: 47"
Blade Length: 35"
Handle Length: 12"
Weight: 2lb 14oz
Point of Harmonics: 21 3/4"
Width at Guard: 2 1/4"
Width at Tip: 11/16"
Blade Steel: 5160 Spring Steel
Hrc Edge: 50~53 Hrc
Handle Material: Leather over cord wrap, wooden
cord
Cost: $299.00
Key Features



9/11
Dismountable
Tinker approved
www.stageswords.com
16
Blunt Tinker Bastard Sword SH2401
Our Tinker Bastard sword is based on the Oakeshott Type XVIIIA. The blunt has a long, broad
fuller, to compensate for the edge thickness, and the tip is sufficiently flexible to provide an
adequate level of safety. Wheel-type pommels are sized to provide a grip for the second hand
when required, and the straight tapering cross provides excellent hand protection.
Specifications:
Overall: 42 3/4"
Weight: 2 lb 6 oz
Cost: $282.00
Key Features



9/11
Dismountable
Tinker Approved
www.stageswords.com
17
Blunt Tinker Early Medieval Sword SH2405
Our Tinker Early Medieval Sword is a single-hand Oakeshott Type XII pieces. The blunt uses a
broad, flat fuller to move mass towards the edges for safety while retaining a very lively feel.
The cruciform hilt is attractive and functional.
Specifications
Overall: 38 1/8"
Weight: 2 lb 8 oz
Cost: $272.00
Key Features
 5160 Marquenched Spring Steel
 Dismountable
 Tinker Approved
9/11
www.stageswords.com
18
Blunt Tinker Norman Sword SH2427
The Tinker Norman sword pair, with their distinctive cruciform guards and brazil-nut pommels,
are similar in weight and static balance and offer virtually identical handling characteristics. Both
are harmonically balanced, optimizing the handling characteristics of this sharp version for the
re-enactor. The blade is forged in 5160 high carbon steel and marquenched to HRc50-52,
providing anti-burr safety. The grip is wood-cored and leather-covered over a cord wrap.
Specifications:
Overall: 36"
Handle Length: 5"
Weight: 2lb 5oz
Cost: $282.00
Key Features



9/11
Peened Pommel
Tinker Approved
www.stageswords.com
19
Practical Norman Sword SH2326
An important addition to our European practical line is the Practical Norman sword, based on a
classic 11th century pattern popular during the Norman Invasion of Britain. The high-carbon
deeply-fullered blade is light and wellbalanced, with the wide edges required by
the re-enactment community. The guard is
wider than that of the earlier Viking
designs that preceded this pattern and the
pommel is of the “tea-cosy” type. The grip
is grooved and leather-wrapped and the
scabbard is left plain for owner
decoration.
Specifications
Overall: 36”
Blade Length: 30”
Weight: 2lb 5oz
Cost: $123.00
Key Features



9/11
www.stageswords.com
20
Renaissance European Swords
Practical Basket Hilt Broadsword SH2059
The Practical Basket-Hilt Broadsword is
built for the re-enactor. The blade is
unsharpened, with 1/16” safety edges and
rounded tips, complying with the combat
rules of many re-enactment societies. The
blade is crafted in 1065 high-carbon steel,
hardened to 50HRC, which reduces edgenotching to acceptable levels while providing
resilience and protection against brittleness.
The scabbard is finished in matte black,
ready for owner customization if desired.
Specifications:
Overall: 38 1/8“
Weight: 2lb
Width at Tip: .73"
Cost: $212.00
Key Features
 Made for the re-enactor
 Authentic look and feel
 Complies with safety
requirements
9/11
www.stageswords.com
21
Practical Backsword SH2075
The Practical Basket-Hilt Backsword is built for the re-enactor. The basket is identical to the
edged version (SH2003), but the blade is unsharpened, with 1/16” safety edges and rounded tips,
complying with the combat rules of many re-enactment societies. The blade is crafted in 1065
high-carbon steel, hardened to 50HRC, which reduces edge-notching to acceptable levels while
providing resilience and protection against brittleness. The scabbard is finished in matte black,
Specifications:
Overall: 39 5/8“
Weight: 2lb 8oz
Cost: $212.00
Key Features



9/11
Authentic styling
www.stageswords.com
22
Practical Mortuary Hilt Sword SH2076
The Practical Mortuary Sword is built for the re-enactor. The blade is unsharpened, with 1/16”
edged and a rounded tip, complying with the combat rules of many re-enactment societies. The
blade is crafted in 1065 high-carbon steel, hardened to 50HRC, which reduces edge-notching to
acceptable levels while providing resilience and protection against brittleness.
Specifications:
Overall: 37“
Weight: 2lb
Width at Tip: .52"
Cost: $212.00
Key Features


9/11
Authentic styling
Great for re-enactors
www.stageswords.com
23
Practical Side Sword SH2279
The Practical Side Sword carries a sparring blade designed for safety. Side sword sparring, in
both sword and buckler and sword and dagger modes is becoming increasingly popular with
many proponents among the ranks of the various Renaissance societies.
Specifications:
Overall: 42 1/2"
Blade Length: 36"
Handle Length: 6"
Weight: 2lb 12oz
Cost: $202.00
Key Features



9/11
Authentic Styling
Safe Sparring
Excellent Balance
www.stageswords.com
24
SH2428 Practical Bastard Sword
Designed specifically for re-enactors, this Bastard sword is forged in 5160 high-carbon steel, to
minimize burring, and the transverse thickness of the guard has been increased, both to provide
adequate strength for re-enactment use and to present a safer profile at the ends of the guard.
Another innovation is the provision of an all-leather scabbard, in contrast with the rigid
scabbards normally provided with our Practical swords - this is designed both to provide an extra
margin of safety when combatants fall on the scabbard in battle and also to minimize the need
for replacement scabbards. The sword is supplied with the grip and scabbard in a neutral-colored
leather to allow customization to the owners taste.
Specifications
Overall: 49 1/2"
Blade Length: 38"
Handle Length: 11"
Weight: 3lb 10oz
Blade Steel: 5160
Cost: $237.00
Key Features



9/11
5160 Steel
Dyable Leather Handle/Scabbard
Built for reenactors
www.stageswords.com
25
SH1032 Fencing Rapier Musketeer Blade
The ever-popular Fencing Rapier, a standard in the sport, is available with either the Schlaeger
blade (SH1032B) or double-wide Epee (Musketeer) blade (SH1032). Either blade will fit the
OL301 sheath.
Specifications:
Overall: 41”
Blade Length: 33 7/8”
Handle Length: 5”
Weight: 1lb 7oz
Cost: $177.00
Key Features



9/11
Musketeer double-wide epee blade
Designed for the Renaissance fencer
Very quick
www.stageswords.com
26
Practical Schlaeger Rapier SH1099 and SH1098
The Schlaeger Rapiers utilize a popular swept hilt, modified to accommodate our schlaeger
blades in 37” (SH1099) and 43” (SH1098) lengths. These tapered blades provide a superior
balance compared to the traditional parallel-sided schlaegers, making for a faster sword.
Our Renaissance-style Rapiers trace their origins to early 17th century Europe, where swordplay
with the Rapier was considered an essential part of a gentleman’s education and was often used
in resolving gentlemanly disagreements. Blades generally originated in one of the blade making
centers such as Toledo or Solingen, but many differences in styling and hilt materials resulted
from the local manufacture of hilts all over Europe.
The Main Gauche, or left hand dagger, was often used with the rapier, providing an added
dimension in both offense and defense, and the “Schools of Fence” which proliferated in Europe
during this period taught the use of the two weapons in combination. The Main Gauche would
often match the Rapier in styling, while incorporating features which maximized the
effectiveness of the piece.
Specifications (37”)
Overall: 43 1/2“
Blade Length: 37“
Weight: 2lb 3oz
Specifications (43”)
Overall: 49 1/4“
Blade Length: 43“
Weight: 2lb 5oz
Cost: $149.00
Key Features



9/11
High-carbon steel blade
Excellent balance
Button-tipped
www.stageswords.com
27
Practical Cup Hilt Rapier SH2261
Designed for the rapier fencer with a preference for the cup-hilt style who wishes to spar in
safety, our Practical Cup-Hilt Rapier fits the bill perfectly. The rapier blade is similar in design to
the practical blades for the swept-hilts but the length of the tang is adapted to the cup-hilt. The
SH2262 Main Gauche matches this rapier.
Specifications:
Overall: 44 1/2"
Blade Length: 37"
Weight: 2lb
Width at Guard: .75"
Width at Tip: .40"
Cost: $212.00
Key Features



9/11
Safe Sparring
High-Carbon Flex-Tempered Blade
Matching Set
www.stageswords.com
28
Washington Blade SH2325
This version of our Washington Court Sword is built for stage combat and historical fencing
practice. The hilt is pure Court Sword (replicating George Washington`s inauguration sword),
with all of the "flash" needed for the stage, but the blade is a modern epee blade, providing both
a very quick and safe sword and the capability of replacing severely worn blades. An attractive
leather scabbard is included.
Specifications
Overall: 44 ½”
Blade Length: 34 ½”
Handle Length: 4”
Weight: 1lb 13oz
Cost: $229.00
9/11
www.stageswords.com
29
Practical Federschwert Longsword SH2333
Our all new Practical Fencing Longsword (or Federschwert) is based on classical training pieces
used in Renaissance Europe. This uniquely styled sword is featured in many period fencing
manuals and is rapidly gaining popularity with modern practitioners of European martial arts.
Designed in conjunction with the OCHS historic fencing organization in Germany, our
Federschwert optimizes all of the balance and flexibility characteristics required for serious
pursuit of this historic art.
Specifications
Overall: 51 ½”
Blade Length: 37”
Handle Length: 13 ½”
Weight: 3lb
Width at Tip: .84"
Cost: $177.00
Key Features



9/11
Forged high-carbon
steel blade
Safe sparring design
Rubber tip included
www.stageswords.com
30
Cutlass SH2374
Our Cutlass design is taken from an original made to the specifications of the Dutch East India
Company (Verenigde Oostindische Compagnie, VOC), dating from about 1780. The lightly
antiqued high carbon steel blade has a distal ta¬per, with fullers on both sides along the spine,
and handles well. It is fully tempered and while provided un-edged, for re-enactment purposes, it
is capable of taking and holding a useful edge. The solid brass hilt basket is matched by the
locket and chape of the leather-covered scabbard.
Specifications
Overall: 31 ¼”
Blade Length: 25”
Weight: 2lb 2oz
Key Features



Forged High-Carbon Blade
Brass hilt
Museum replica
Cost: $193.00
9/11
www.stageswords.com
31
Our Renaissance-style Rapiers trace their origins to early 17th century Europe, where swordplay with the Rapier
was considered an essential part of a gentleman’s education and was often used in resolving gentlemanly
disagreements. Blades generally originated in one of the blade making centers such as Toledo or Solingen, but many
differences in styling and hilt materials resulted from the local manufacture of hilts all over Europe.
Rapier – Wood Grip SH1024 (Sharp)
This Swept-Hilt Rapier features classical lines, with a
high-carbon steel flex-tempered blade, a stainless steel
hilt (for reduced maintenance) and a hardwood grip.
The hilt is of the same size as the museum piece on
which it is based, providing an authentic “feel” in the
user’s hand and weight and balance also match
originals. The blade is interchangeable with our
“Practical” blade (OH2255) which is designed for
safety in rapier sparring. The matching Main Gauche
(SH2117) may also be equipped with a sparring blade.
Specifications:
Overall: 44 3/4“
Weight: 2lb 1oz
Width at Tip: .40"
Cost: $212.00
Key Features



9/11
Authentic historical design
Steel basket
Rigid scabbard
www.stageswords.com
32
Rapier – Bone Grip SH1092 (Sharp)
This Swept-Hilt Rapier features classical lines, with a high-carbon steel flex-tempered blade, a
stainless steel hilt (for reduced maintenance) and a bone grip. The hilt is of the same size as the
museum piece on which it is based, providing an authentic “feel” in the user’s hand and weight
and balance also match originals. The blade is interchangeable with our “Practical” blade
(OH2255) which is designed for safety in rapier
sparring. The matching Main Gauche (SH2117)
may also be equipped with a sparring blade.
Specifications:
Overall: 45 1/4“
Weight: 2lb 2oz
Width at Tip: .33"
Cost: $237.00
Key Features



9/11
High-carbon steel
blade
Genuine bone grip
Rigid scabbard
included
www.stageswords.com
33
Torino Rapier SH2204 (Sharp)
Based on models of 17th century swept-hilt rapiers of Italian
ancestry, our Torino Rapier exhibits the classic straight crossguard
styling popular in this part of Europe. The rapier features classical
lines, with a high-carbon steel flex-tempered blade, a stainless
steel hilt (for reduced maintenance) with "blade catcher" quillons
and a twisted-wire grip. The hilt is of the same size as the original,
providing an authentic “feel” in the user’s hand and weight and
balance also match originals. The blade is interchangeable with
our “Practical” blade (OH2255) which is designed for safety in
rapier sparring. The matching Main Gauche (SH2207) may also be
equipped with a sparring blade.
Specifications:
Overall: 45 ¼”
Weight: 2lb 5oz
Width at Tip: .40"
Cost: $212.00
Key Features



9/11
Forged high-carbon steel
Black leather scabbards
Excellent Balance
www.stageswords.com
34
Antiqued Torino Rapier SH2204N (Sharp)
This "antiqued" version of the Torino Rapier features a hilt finish, developed by Hanwei, that
allows a museum-quality patina to be applied to stainless steel while the non-corroding
properties of the steel are retained. This finish is very attractive and gives an authentic
appearance to the piece. The blade is interchangeable with our “Practical” blade (OH2255)
which is designed for safety in rapier sparring. The matching Main Gauche (SH2207N) may also
be equipped with a sparring blade.
Specifications:
Overall: 45 ¼”
Weight: 2lb 5oz
Width at Tip: .40"
Cost: $237.00
Key Features



9/11
Brown leather scabbards
Antiqued patina
www.stageswords.com
35
Solingen Rapier SH2205 (Sharp)
This Swept-Hilt Rapier features classical lines, with a high-carbon steel flex-tempered blade, a
stainless steel hilt (for reduced maintenance) with "blade catcher" quillons and a twisted-wire
grip. The hilt is of the same size as the 17th Century German piece on which it is based,
providing an authentic “feel” in the user’s hand and weight and balance also match originals. The
blade is interchangeable with our “Practical” blade (OH2255) which is designed for safety in
rapier sparring. The matching Main Gauche (SH2208) may also be equipped with a sparring
blade.
Specifications:
Overall: 45 1/4"
Weight: 2lb 5oz
Width at Tip: .40"
Cost: $212.00
Key Features



9/11
Forged highcarbon steel
Leather
scabbards
Excellent
balance
www.stageswords.com
36
Antiqued Solingen Rapier SH2205N (Sharp)
This "antiqued" version of the Solingen Swept-Hilt Rapier features a hilt finish, developed by
Hanwei, that allows a museum-quality patina to be applied to stainless steel while the noncorroding properties of the steel are retained. This finish is very attractive and gives an authentic
Specifications
Overall: 45 1/4"
Weight: 2lb 5oz
Width at Tip: .40"
Cost: $237.00
Key Features



9/11
Leather scabbards
Excellent Balance
www.stageswords.com
37
Gustav Rapier SH2206 (Sharp)
The Gustav Rapier replicates a weapon used by King Gustav Adolf II, who ruled Sweden in the
early part of the 17th century. The shell guard of the rapier is unusual but effective. The rapier
features classical lines, with a high-carbon steel flex-tempered blade, a stainless steel hilt (for
reduced maintenance) with "blade catcher" quillons and a twisted-wire grip. The hilt is of the
same size as the original, providing an authentic “feel” in the user’s hand and weight and balance
also match originals. The blade is interchangeable with our “Practical” blade (OH2255) which is
designed for safety in rapier sparring. The matching Main Gauche (SH2209) may also be
equipped with a sparring blade.
Specifications”
Overall: 45 ¼”
Weight: 2lb 5oz
Width at Tip: .40"
Cost: $212.00
Key Features
 Forged high-carbon spring steel blades
 Leather scabbards
 Excellent Balance
9/11
www.stageswords.com
38
Antiqued Gustav Rapier SH2206N (Sharp)
This "antiqued" version of the Gustav Rapier features a hilt finish, developed by Hanwei, that
allows a museum-quality patina to be applied to stainless steel while the non-corroding
properties of the steel are retained. This finish is very attractive and gives an authentic
Specifications:
Overall: 45 ¼”
Weight: 2lb 5oz
Width at Tip: .40"
Cost: $237.00
Key Features
 Forged high-carbon spring steel blades
 Leather scabbards
 Excellent Balance
9/11
www.stageswords.com
39
The Main Gauche, or left hand dagger, was often used with the rapier, providing an added dimension in both offense
and defense, and the “Schools of Fence” which proliferated in Europe during this period taught the use of the two
weapons in combination. The Main Gauche would often match the Rapier in styling, while incorporating features
which maximized the effectiveness of the piece. Blunt replacement blades are available for most of the Rapiers and
Main Gauches for stage combat and re-enactment purposes.
Fencing Main Gauche SH1033
The Fencing Main Gauche is made as a match for the SH1032 and SH1032B Fencing Rapiers. It
is fitted with a training blade that combines adequate parrying stiffness at the forte with tip
flexibility for safety, making the piece ideal for two-weapon sparring. Our OH2256 blade is
available for replacing severely worn or damaged blades.
Specifications
Overall: 22 1/4“
Weight: 7oz
Cost: $115.00
Key Features
 Very light and
quick
 Safe flexible blade
 Used by many
Renaissance
fencing
organizations
9/11
www.stageswords.com
40
Wood Grip Main Gauche SH2117 (Sharp)
Matching our Wood Grip Rapier (SH1024), the Wood Grip Main Gauche provides an
authentically-styled parrying weapon, with a high-carbon steel blade and a stainless steel hilt (for
reduced maintenance). The blade is interchangeable with our “Practical” blade (OH2256) which
is designed for safety in rapier/main gauche sparring.
Specifications
Overall: 16 5/8"
Blade Length: 11"
Weight: 9oz
Cost: $119.00
Key Features



9/11
Historic styling
Perfect balance
Wood Grip
www.stageswords.com
41
Bone Grip Main Gauche SH2197 (Sharp)
Matching our Bone Grip Rapier (SH1092), the Bone Grip Main Gauche provides an
authentically-styled parrying weapon, with a high-carbon steel blade and a stainless steel hilt (for
reduced maintenance). The blade is interchangeable with our “Practical” blade (OH2256) which
is designed for safety in rapier/main gauche sparring.
Specifications:
Overall: 17“
Weight: 9oz
Cost: $120.00
Key Features



9/11
Historically accurate
Perfect balance
Bone Grip
www.stageswords.com
42
Solingen Main Gauche SH2208 (Sharp)
Matching our Solingen Rapier (SH2205), the Solingen Main Gauche provides an authenticallystyled parrying weapon, with a high-carbon steel blade and a stainless steel hilt (for reduced
maintenance). The blade is interchangeable with our “Practical” blade (OH2256) which is
designed for safety in rapier/main gauche sparring.
Specifications:
Overall: 17"
Weight: 12oz
Cost: $120.00
Key Features


9/11
Forged high-carbon
steel
Leather scabbards
www.stageswords.com
43
Antiqued Solingen Main Gauche SH2208N (Sharp)
This "antiqued" version of the Solingen Main Gauche (SH2208) features a hilt finish, developed
by Hanwei, that allows a museum-quality patina to be applied to stainless steel while the noncorroding properties of the steel are retained. This finish is very attractive and gives an authentic
which is designed for safety in rapier/main gauche sparring.
Specifications:
Overall: 17"
Weight: 12oz
Cost: $128.00
Key Features


9/11
Leather scabbards
www.stageswords.com
44
Torino Main Gauche SH2207 (Sharp)
Matching our Torino Rapier (SH2204), the Torino Main Gauche provides an authentically-styled
parrying weapon, with a high-carbon steel blade and a stainless steel hilt (for reduced
Specifications:
Overall: 16 5/8"
Blade Length: 11"
Weight: 11oz
Cost: $123.00
Key Features


9/11
www.stageswords.com
45
Antiqued Torino Main Gauche SH2207N (Sharp)
This "antiqued" version of the Torino Main Gauche (SH2207) features a hilt finish, developed by
Hanwei, that allows a museum-quality patina to be applied to stainless steel while the noncorroding properties of the steel are retained. This finish is very attractive and gives an authentic
Specifications:
Overall: 16 5/8”
Blade Length: 11”
Weight: 9oz
Cost: $128.00
Key Features



9/11
Antiqued patina
www.stageswords.com
46
Gustav Main Gauche SH2209 (Sharp)
Matching our Gustav Rapier (SH2206), the Gustav Main Gauche provides an authenticallystyled parrying weapon, with a high-carbon steel blade and a stainless steel hilt (for reduced
Specifications
Overall: 17”
Weight: 12oz
Cost: $123.00
Key Features


9/11
Forged high-carbon
steel
Leather scabbards
www.stageswords.com
47
Antiqued Gustav Main Gauche SH2209 (Sharp)
This "antiqued" version of the Gustav Main Gauche (SH2209) features a hilt finish, developed
by Hanwei, that allows a museum-quality patina to be applied to stainless steel while the noncorroding properties of the steel are retained. This finish is very attractive and gives an authentic
Specifications:
Overall: 17”
Weight: 12oz
Cost: $128.00
Key Features


9/11
Forged high-carbon spring steel blades
Leather scabbards
www.stageswords.com
48
Re-Enactment Swords
Our Practical broadswords are all based on authentically styled swords in our collection but they are tailored to meet
the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt
styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while
providing the level of safety required by many of today’s re-enactment societies. The blades are crafted from 1065
high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience
and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good
handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial,
with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which
both eliminates any possibility of inadvertent disassembly. The hardwood grips are leather-covered. The scabbards
are fabricated in glass-filled resin, to eliminate swelling and to minimize blade corrosion problems, with belt rings
that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will
decorate the scabbard to match their persona.
Please note that although the weapons listed below are specifically intended for re-enactment use, the rapiers listed
on the Renaissance European page may be made to comply with regulations by replacing the blade with the
applicable "practical" blade.
Practical Single-Hand Sword SH2046
The Practical Single-Hand Sword is based on the Marshall
sword, so named for one of England’s finest knights of the
latter half of the 12th century. The sword is classically styled,
with a cruciform hilt, wheel pommel and a ridged-andfullered blade that is both stiff and surprisingly light. With a
weight of less than 2 ½ lbs., the sword can be wielded
forcefully without undue wear and tear on the arm.
Specifications:
Overall: 36 1/2“
Blade Length: 30“
Weight: 2lb 7oz
Cost: $123.00
Key Features



9/11
www.stageswords.com
49
Practical Hand-and-a-Half Sword SH2106
The Practical Hand-and-a Half sword is based on the Albrecht sword, a classic design from the
early part of the 15th century, with a simple cruciform hilt, flattened diamond-section blade and
typical hand-and-a-half grip. With a weight of just 3 ¼ lbs. it handles very well without tiring the
player during a long day in the field.
Specifications
Overall: 43 3/4“
Blade Length: 34“
Weight: 2lb 12oz
Width at Tip: .51"
Cost: $140.00
Key Features



9/11
Fullered blade
www.stageswords.com
50
Blunt Tinker 9th Century Viking Sword SH2409
While not a direct copy of any particular sword, the Viking sword design was inspired by
historical examples from the early 9th Century, most notably finds from the area around
Trondheim, Norway, where the circular indentation hilt decoration was popular.The scabbards
are provided with suspension points and a period chape, giving the sheathed sword a very
attractive appearance. The construction of the Viking "pair" differs from other swords in the
Tinker series inasmuch as they are tang-riveted (peened) in period fashion at the pommel,
primarily to satisfy Viking re-enactment requirements, and the blunt blade design is very much
directed towards re-enactment rather than sparring.
Specifications:
Overall: 37 1/2"
Weight: 2 lb 12 oz
Cost: $290.00
Key Features



9/11
Peened Pommel
Tinker Approved
www.stageswords.com
51
Practical Viking Sword SH2047
The Practical Viking sword is based on our Godfred sword, whose design originated in 9th
century Scandinavia. The lobate pommel and down-turned guard are typical of Viking swords of
the period, as is the broad blade with its deep, full-length fullers. The sword is well-balanced
and, with a weight slightly over 2 lbs., it is very quick.
Specifications:
Overall: 33 1/2“
Blade Length: 28“
Weight: 2lb 2oz
Cost: $114.00
Key Features



9/11
www.stageswords.com
52
Practical Basket Hilt Broadsword SH2059
The Practical Basket-Hilt Broadsword is
built for the re-enactor. The blade is
unsharpened, with 1/16” safety edges and
rounded tips, complying with the combat
rules of many re-enactment societies. The
blade is crafted in 1065 high-carbon steel,
hardened to 50HRC, which reduces edgenotching to acceptable levels while providing
resilience and protection against brittleness.
The scabbard is finished in matte black,
Specifications:
Overall: 38 1/8“
Weight: 2lb
Width at Tip: .73"
Cost: $212.00
Key Features
 Made for the re-enactor
 Authentic look and feel
 Complies with safety
requirements
9/11
www.stageswords.com
53
Practical Norman Sword SH2326
An important addition to our European practical line is the Practical Norman sword, based on a
classic 11th century pattern popular during the Norman Invasion of Britain. The high-carbon
deeply-fullered blade is light and well-balanced, with the wide edges required by the reenactment community. The guard is wider than that of the earlier Viking designs that preceded
this pattern and the pommel is of the “tea-cosy” type The grip is grooved and leather-wrapped
and the scabbard is left plain for owner decoration.
Specifications:
Overall: 36”
Blade Length: 30”
Weight: 2lb 5oz
Cost: $123.00
Key Features



9/11
Authentic look and
feel
Complies with
safety requirements
www.stageswords.com
54
Blunt Tinker Norman Sword SH2427
The Tinker Norman sword pair, with their distinctive cruciform guards and brazil-nut pommels,
are similar in weight and static balance and offer virtually identical handling characteristics. Both
are harmonically balanced, optimizing the handling characteristics of this version for the reenactor. The blade is forged in 5160 high carbon steel and marquenched to HRc50-52, providing
anti-burr safety. The grip is wood-cored and leather-covered over a cord wrap.
Specifications:
Overall: 36"
Handle Length: 5"
Weight: 2lb 5oz
Cost: $282.00
Key Features



9/11
5160 Marquenched
Spring Steel
Peened Pommel
Tinker Approved
www.stageswords.com
55
SH2428 Practical Bastard Sword
Designed specifically for re-enactors, this Bastard sword is forged in 5160 high-carbon steel, to
minimize burring, and the transverse thickness of the guard has been increased, both to provide
adequate strength for re-enactment use and to present a safer profile at the ends of the guard.
Another innovation is the provision of an all-leather scabbard, in contrast with the rigid
scabbards normally provided with our Practical swords - this is designed both to provide an extra
margin of safety when combatants fall on the scabbard in battle and also to minimize the need
for replacement scabbards. The sword is supplied with the grip and scabbard in a neutral-colored
leather to allow customization to the owners taste.
Specifications
Overall: 49 1/2"
Blade Length: 38"
Handle Length: 11"
Weight: 3lb 10oz
Blade Steel: 5160
Cost: $237.00
Key Features



9/11
5160 Steel
Dyable Leather Handle/Scabbard
Built for reenactors
www.stageswords.com
56
Practical Backsword SH2075
The Practical Basket-Hilt Backsword is built for the re-enactor. The basket is identical to the
edged version (SH2003), but the blade is unsharpened, with 1/16” safety edges and rounded tips,
complying with the combat rules of many re-enactment societies. The blade is crafted in 1065
high-carbon steel, hardened to 50HRC, which reduces edge-notching to acceptable levels while
providing resilience and protection against brittleness. The scabbard is finished in matte black,
Specifications:
Overall: 39 5/8“
Weight: 2lb 8oz
Cost: $212.00
Key Features



9/11
Authentic styling
www.stageswords.com
57
Practical Mortuary Hilt Sword SH2076
The Practical Mortuary Sword is built for the re-enactor. The blade is unsharpened, with 1/16”
edged and a rounded tip, complying with the combat rules of many re-enactment societies. The
blade is crafted in 1065 high-carbon steel, hardened to 50HRC, which reduces edge-notching to
acceptable levels while providing resilience and protection against brittleness.
Specifications:
Overall: 37“
Weight: 2lb
Width at Tip: .52"
Cost: $212.00
Key Features


9/11
Authentic styling
Great for re-enactors
www.stageswords.com
58
Cutlass SH2374
Our Cutlass design is taken from an original made to the specifications of the Dutch East India
Company (Verenigde Oostindische Compagnie, VOC), dating from about 1780. The lightly
antiqued high carbon steel blade has a distal ta¬per, with fullers on both sides along the spine,
and handles well. It is fully tempered and while provided un-edged, for re-enactment purposes, it
is capable of taking and holding a useful edge. The solid brass hilt basket is matched by the
locket and chape of the leather-covered scabbard.
Specifications
Overall: 31 ¼”
Blade Length: 25”
Weight: 2lb 2oz
Key Features



Forged High-Carbon Blade
Brass hilt
Museum replica
Cost: $193.00
9/11
www.stageswords.com
59
Sabres
One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century
Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the
military sabre. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this
style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted
for sabre at the Military Masters School in Rome. The hilt designs developed by Radaelli and Pecoraro have been
reproduced in our fencing sabers, with stainless steel guards and wire-wrapped sharkskin-pattern grips. The highcarbon flex-tempered steel blades closely follow the proportions of the period and are button-tipped for safety. The
blade and hilt of the “Hutton” sabre are closer to the style of the true military sabre.
Pecoraro Sabre SH2199
The Pecoraro Sabre features a full-cupped perforated guard, ridged for reinforcement at the
thinner pommel end of the "D". The high-carbon steel blade is very flexible towards the tip. A
replacement blade (OH2264) is available.
Specifications:
Overall: 40 ¼”
Blade Length: 34”
Handle Length: 5 ¾”
Weight: 1lb 5oz
Cost: $146.00
Key Features



9/11
Dueling Sabre
High-Carbon FlexTempered Blade
Replacement Blade
Available
www.stageswords.com
60
Radaelli Sabre SH2200
The Radaelli Sabre features a fully-ridged guard with the classic reinforcing ring common to the
Radaelli style. The high-carbon steel blade is very flexible towards the tip. A replacement blade
(OH2264) is available.
Specifications:
Overall: 40 ¼”
Blade Length: 33 ¾”
Handle Length: 5 ¾”
Weight: 1lb 7oz
Cost: $132.00
Key Features



9/11
Deuling Sabre
Replacement Blade Available
www.stageswords.com
61
Hutton Sabre SH2201
The blade and hilt of the “Hutton” sabre imitate the style of the true military sabre to provide a
more realistic military training sword.. The blade is somewhat shortened and lightened, with a
rounded tip for effective training, and exhibits a somewhat greater flexibility than the live
military sword.
Specifications:
Overall: 37 1/4"
Blade Length: 31”
Handle Length: 6”
Weight: 1lb 6oz
Cost: $123.00
Key Features



9/11
Dueling Sabre
Replacement Blade Available
www.stageswords.com
62
Polearms
Ash Pole OX005
Our OX005 Ash Poles (7 feet long by 1 ¼” diameter) are suitable both as polearm staves and
quarterstaffs. Our XH2038 and XH2040 spearheads are ideal applications for these poles.
Product Details
Ash Pole-Stave
MSRP: $26.00
9/11
www.stageswords.com
63
Short Bladed Spearhead XB0049
Made specifically for re-enactment use, this spearhead is crafted with a bulbous tip and 3 mm
thick edges.
Length: 7".
Weight: 8 oz.
Cost: $20.00
Key Features



Safety tip
3mm edges
Rounded flanges
Medium Bladed Spearhead XB0050
thick edges.
Length: 14".
Weight: 12 oz.
Cost: $22.00
Key Features



9/11
www.stageswords.com
Safety tip
3mm edges
Rounded flanges
64
Throwing Spearhead XB0051
thick edges.
Length: 19".
Weight: 1 lb.
Cost: $25.00
Key Features
 Safety tip
 3mm edges
 Rounded flanges
Thrusting Spearhead XB0053
Made specifically for re-enactment use, this spearhead is crafted with a bulbous tip, 3 mm thick
edges and rounded flanges.
Length: 14".
Weight: 1 lb.
Cost: $25.00
Key Features
 Safety tip
 3mm edges
 Rounded flanges
9/11
www.stageswords.com
65
Replacement Blades
Blunt Tinker Longsword OH2397
This Longsword blunt sparring blade may be used
either to replace severely worn sparring blades or to
convert the Longsword cutting sharp (SH2394) to a
sparring format.
Cost: $140.00
Blunt Tinker Bastard OH2403
This Bastard blunt sparring blade may be used either
to replace severely worn sparring blades or to
convert the Bastard cutting sharp (SH2400 or
SH2411) to a sparring format.
Cost: $132.00
Overall: 33 3/8"
9/11
www.stageswords.com
66
Blunt Tinker Early Medieval OH2407
This Longsword blunt sparring blade may be used
either to replace severely worn sparring blades or to
convert the Early Medieval cutting sharp (SH2404)
Cost: : $132.00
Overall: 31 3/8"
Tinker 9th Century Viking OH2420
Although the Tinker Viking swords have riveted
tangs we are nevertheless offering replacement
blades for those wishing to either replace severely
worn blades or wishing to build a custom Viking
sword.
Overall: 30 1/8"
Cost: $160.00
9/11
www.stageswords.com
67
Practical Main Gauche Blunt OH2256
This blade will enable three of our most popular main gauche models to be converted from live
blade to practical sparring blade configuration. Fits: Solingen Main Gauche(SH2208, SH2208N),
Torino Main Gauche(SH2207, SH2207N) Gustav Main Gauche (SH2209, SH2209N). Also fits
the SH1033 Fencing Main Gauche.
Specifications:
Overall: 16 1/4"
Blade Length: 12"
Weight: 3oz
Cost: $44.00
Practical Rapier OH2255
This blade will enable three of our most popular rapier models to be converted quickly from live
blade to practical sparring blade configuration, with its blunted rubber tip. Fits: Solingen Rapier
(SH2205, SH2205N), Torino Rapier (SH2204, SH2204N), Gustav Rapier (SH2206, SH2206N).
Specifications:
Overall: 44 1/2"
Blade Length: 37"
Weight: 13oz
Cost: $58.00
9/11
www.stageswords.com
68
Replacement Schlaeger OHLASP01
This oval section Schlager blade, as used on the SH1032B Fencing Rapier, is available
separately for blade replacement or for use in building customized rapiers. Authorized for rapier
fencing by many reenactment groups, the OHLASP01 is a sturdy blade, forged in high-carbon
spring steel.
Specifications
Overall: 41”
Weight: 8oz
Cost: $61.00
Key Features



9/11
Durable
High-carbon spring steel
Oval section
www.stageswords.com
69
Accessories
Broadsword Belt
OH2451 right handed, OH2452 left handed
Our sword belt is styled after 13th century examples and is capable of handling most medievalstyle single-hand and hand-and-a-half swords. Unlike most of the originals, which were usually
dedicated to a particular sword,
our belt has fully adjustable belt
loops to accommodate a wide
variety of scabbards. Both rightand left-handed versions are
available. Crafted in heavy topgrain leather and sized to adjust to
most waist sizes, these belts will
provide many years of hard use.
Weight: 15 oz
Cost: $88.00
AB0116 Plain Buckler
Used from the 12th thru the 18th century, the
buckler achieved a deserved reputation as both a
defensive and offensive arm. Indispensable in both
classical rapier play and I.33 sparring, it has
become an essential part of the modern
swordsman's equipment. Crafted in 14 gauge steel,
all of our bucklers have rolled edges and come in
three sizes to meet individual needs. This plain
version combines complete functionality with
economical pricing. The steel tube grip is securely
riveted to the body of the buckler.
Diameter: 9".
Weight: 2 lbs.
Gauge: 14



9/11
AB0116 - Diameter: 9” Cost: $31.00
AB0117 - Diameter: 12" Cost: $40.00
AB0118 - Diameter: 15" Cost: $52.00
www.stageswords.com
70
AB0119 Plated Buckler
This version features radial reinforcing plates. The steel tube
grip is securely riveted to the body of the buckler.
Diameter: 9".
Weight: 2-1/4 lbs.
Gauge: 14



AB0119 - Diameter: 9" – Cost: $35.00
AB0120 - Diameter: 12" - Cost: $44.00
AB0121 - Diameter: 15" - Cost: $58.00
AB0122 Fluted Buckler
This version features radial embossed flutes for rigidity.. The
steel tube grip is securely riveted to the body of the buckler.
Diameter: 9".
Weight: 2-1/4 lbs.
Gauge: 14



9/11
AB0122 - Diameter: 9" - Cost: $35.00
AB0123 - Diameter: 12" - Cost: $44.00
AB0124 - Diameter: 15" - Cost: $58.00
www.stageswords.com
71

The Fight Director Line

Transcription

Similar documents

Tactical Katana

MODEL LM 1 - Log Master Portable Saw Blade

FKN Depaneling Data Sheet

SYC-300M - Leadermac USA

JOEWELL PRODUCT GUIDE 【Specification of Scissors】

Extreme curve cutting speed

Historical Weapons

BISCUIT JOINER - Canadian Tire

product guide

Sword Buyers Digest: MAGAZINE!