Meiko Warewashing 2013
Transcription
Meiko Warewashing 2013
Professional warewashing technology Price List 2013 SECTION 1 Warewashing appliances & accessories ECO series glass & dishwashing machines Premium series glass & dishwashing machines Premium series machines with GiO reverse osmosis system Stainless steel entry & exit tables Meiko glass & dishwashing baskets Premium pot, pan and utensils washers K-Tronic rack transport machines B-Tronic flight type machines Tray transport conveying systems SECTION 2 Water treatment and chemicals Water softening appliances Reverse osmosis units Water pressure booster pumps Detergent & rinse aid products SECTION 3 Kitchen food waste handling appliances Food waste disposal units Wet waste dewatering unit Compactors & accessories SECTION 4 Taps, Pre-rinse spray units, hose reels and enzyme dosing units Meiko taps & retractable hose reels Sink units, hand wash basins & janitorial sinks Fly killers SECTION 5 Mobile handling & dish clearing equipment Mobile tray transport trolleys Plate & tray lowerators Mobile soak sinks COSHH cupboards G.P. trolleys www.meiko-uk.co.uk www.meiko-uk.net (Food Waste Handling Solutions) Warewashing Appliances & Accessories www.meiko-uk.co.uk www.meiko-uk.net (Food Waste Handling Solutions) SECTION 1.0 Warewashing appliances and accessories 1.1 ECO series front loading glass and dishwashing machines Machines constructed throughout in type 304 (1.4301) stainless steel and fully clad to rear, sides, and base. Additional features include pressed tank with large radius coved corners, double wall construction for first class sound and heat insulation, and tented internal upper surface to prevent dripping onto clean crockery. All dishwashers are supplied with two plate racks, one cup rack and two cutlery holders, glasswashers are supplied with one (ECO430) or two (ECO530) open glass racks. WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING ECO430 ECO430 with MIKE 1 electronic control • • • • • • • • 2.6kW (13 amp) hot fill only ECO530 ECO530 EW10 EC0530 with MIKE 1 electronic control ECO530 with EW10 softener with MIKE 1 electronic control www.meiko-uk.co.uk Page 1 • • • • • • • • • • • • Basket size 400mm x 400mm 120/180 second programme cycles Door passing height of 300mm Up to 480 pint glasses per hour Suitable for hot or cold water filling Connection to a 13amp supply Integral drain and rinse booster pump Detergent and rinse aid pumps and containers Soft start feature on wash pump Rotating upper and lower rinse arms Rotating washing system from below Fixed washing system from above Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 460 x 575 x 790mm Wash pump rating of 0.55kW Supplied with one open glass basket • • • • • • • • • • • • • • • • • • • Basket size 500mm x 500mm 120 – 180 second programme cycle Door passing height of 320mm Up to 540 dinner plates per hour Up to 750 glasses per hour Suitable for hot or cold water filling 13amp, 1ph, or 3ph connection Integral drain and rinse booster pump Detergent and rinse aid pumps Detergent and rinse aid containers Soft start feature on wash pump Rotating upper and lower wash & rinse arms Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 600 x 600 x 820mm Wash pump rating of 0.55kW • • • • • • • • • • • • • • • • • • • Basket size 500mm x 500mm 120 – 180 second programme cycle Door passing height of 320mm Up to 540 dinner plates per hour Up to 750 glasses per hour Suitable for hot or cold water filling 1ph or 3ph connection Integral drain pump Detergent and rinse aid pumps Detergent and rinse aid containers Soft start feature on wash pump Rotating upper and lower wash & rinse arms Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Self cleaning cycle after drain down Overall size 600 x 650 x 820mm Integral water softening apparatus Wash pump rating of 0.55kW LIST PRICE £4,021.00 3.6kW (1 or 3 phase) 2.6kW (13 amp) hot fill only £4,292.00 Alternative 4.6kW (1 phase) Alternative 6.6kW (3 phase) 2.78kW (13 amp) hot fill only £5,457.00 Alternative 4.78kW (1 phase) Alternative 6.78kW (3 phase) Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.1 ECO series stands for front loading models ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE MHEMPF400ST Stand for ECO430 glasswasher, overall dimensions 460 x 550 x 400mm high, and with 2 basket runners under. £346.00 MHEMPF500ST Stand for ECO530 dishwasher with overall dimensions 600 x 600 x 400mm high, and with 2 basket runners under. £382.00 MHEMPF500CB Cabinet base for ECO530 with overall dimensions 600 x 600 x 400mm high and with hinged doors to front. Can be used for chemical storage or for siting compact reverse osmosis apparatus £604.00 MHEMPF500CD Mobile dolly to suit ECO 530 Dimensions: 620 x 620 x 90mm high £244.00 PRE-700 Machine “on top” pre-rinse station to suit ECO 530, 600 x 600mm with single pedestal cold water rinse unit www.meiko-uk.co.uk Page 2 £2,042.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.1 ECO series hood type pass through dishwashing machines Machines constructed throughout in type 304 (1.4301) stainless steel and fully clad to rear, sides, and base. Additional features include pressed tank with large radius coved corners, double wall construction for first class sound and heat insulation, and tented internal upper surface to prevent dripping onto clean crockery. All dishwashers are supplied with two plate racks, one cup rack and two cutlery holders. WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING ECO545 ECO545 with MIKE 1 electronic control • • • • • • • • • • • • • • • • • • • Basket size 500mm x 500mm 90-120-240 second programme cycle Hood passing height of 440mm 720 dinner plates per hour capacity Suitable for hot or cold water filling 1ph or 3ph connection Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Rotating upper and lower rinse arms Rotating upper and lower wash arms Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 635 x 750 x 1470mm Max height with hood fully open 2050mm Wash pump rating of 0.75kW 5.78kW (1 phase) • • • • • • • • • • • • • • • • • • • Basket size 500mm x 500mm 90-120-240 second programme cycle Hood passing height of 440mm 720 dinner plates per hour capacity Suitable for hot or cold water filling 1ph or 3ph connection Integral drain pump Detergent and rinse aid pumps Soft start feature on wash pump Rotating upper and lower rinse arms Rotating upper and lower wash arms Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Self cleaning cycle after drain down Overall size 635 x 750 x 1470mm Max height with hood fully open 2050mm Integral water softening apparatus Wash pump rating of 0.75kW ECO545 EW10 ECO545 with EW10 softener with MIKE 1 electronic control www.meiko-uk.co.uk Page 3 LIST PRICE £7,075.00 Alternative 8.28kW (3 phase) 6.01kW (1 phase) £8,327.00 Alternative 8.51kW (3 phase) Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.1 ECO series hood type pass through dishwashing machines ORDER CODE ILLUSTRATION DESCRIPTION Airbox “AktivAir” integrated vapour condensation hood with double walled air duct for optimisation of the condensation process. The steam extraction is linked with the dishwasher programme. Without filters and completely maintenance free. Overall height of machine increases from 2050mm to 2390mm. ECO545AA www.meiko-uk.co.uk Page 4 LIST PRICE £2,184.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Premium series front loading glasswashing machines. GiO models are fitted with an innovative integrated reverse osmosis rinse water module. Machines constructed throughout in type 304 (1.4301) stainless steel and fully clad to rear, sides, and base. Additional features include pressed tank with large radius coved corners, double wall construction for first class sound and heat insulation, and tented internal upper surface to prevent dripping onto clean glassware. WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES FV28GiO FV28GiO • • • • • • • • • • • • • • • • • • • MHEMPF400ST FV40.2G Basket size 400mm x 400mm 120 and 180 second programme cycle Clear entry passing height of 300mm Up to 750 mixed glasses/hour throughput Water feed, minimum 1°C, maximum 30°C Flow pressure, between 1bar and 3bar Maximum water feed hardness 240° clarke 240v/50hz/1phase connection only Rotating wash arms below Fixed wash jets above Rotating upper and lower rinse arms Detergent and rinse aid pumps and containers included Connection kit includes inlet and outlet hose, cable, water filter, stop valve, nonreturn check valve, PRV and manometer Integral drain pump for high level waste Overall size 460 mm x 550mm x 820mm high Rinse water consumption of 2.2lt/basket Wash pump rating of 0.55kW Supplied with one open glass basket Additional water softening is not required LOADING 3.0kW with MIKE 2 electronic control and infrared data capture tool Gio • • • • • • • • • • • • • • • • • • • • • • • Technical information: Feed water temperature to be not less than 1° C and not more than 30° C. Conductivity of the untreated feed water to be no more than 1000 µs/CM Maximum hardness of the untreated water not to exceed 24° clarke (343PPM’s) • Purity level of the treated water approximately 98% www.meiko-uk.co.uk Page 5 Basket size 500mm x 500mm 90-120-240 second programme cycle Door passing height of 315mm Up to 1440 glasses per hour capacity Suitable for hot or cold water filling 1ph, or 3ph connection Integral drain and rinse booster pump Detergent and rinse aid pumps Detergent and rinse aid containers Soft start feature on wash pump Rotating wash and rinse arms Wash pump rating of 0.55kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class 'A' air gap Self cleaning cycle after drain down Overall size 600 x 600 x 700-730mm Supplied with one 4 terrace rilsan coated basket £6,556.00 (13 amp) £346.00 Stand for FV28G glasswasher, with overall dimensions 460 x 550 x 400mm high, with 2 basket runners under. FV40.2G LIST PRICE 2.60kW (13 amp) hot fill only £6,416.00 Alternative 4.60kW (1 phase) Alternative 6.60kW (3 phase) Note: • Pre-treatment of the incoming water feed not necessary provided that the hardness is not more than 24° clarke, or 343 particles per million (PPM’s). • Supplied filter to be changed, interval dependent on water quality. Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Premium series front loading glasswashing machines. GiO models are fitted with an innovative integrated reverse osmosis rinse water module. ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING FV40.2GGiO FV40.2G-GiO • Basket size 500mm x 500mm • 90,120 and 240 second programme cycle • Clear entry passing height of 315mm • Up to 1440 mixed glasses/hour throughput • Water feed, minimum 1°C, maximum 30°C • Flow pressure, between 1bar and 3bar • Maximum water feed hardness 240 clarke • Upper and lower rotating wash and rinse arms • Detergent and rinse aid pumps and containers included • Connection kit includes inlet and outlet hose, cable, water filter, stop valve, nonreturn check valve, PRV and manometer • Integral drain pump for high level waste • Overall size 600 mm x 600mm x 820mm high • Rinse water consumption of 2.6lt/basket • Wash pump rating of 0.55kW • Supplied with one 4 terrace rilsan coated basket • Plinth mounted GiO Module (can also be supplied as remote unit) • Additional water softening is not required 3.0kW with MIKE 2 electronic control and infrared data capture tool FV 40.2G GiO AO FV 40.2G GiO AO with MIKE 2 electronic control and infrared data capture tool • • • • • • • • • • • • Thermal Disinfection Model • • • • • • • • Gio • • • Technical information: Feed water temperature to be not less than 1° C and not more than 30° C. Conductivity of the untreated feed water to be no more than 1000 µs/CM Maximum hardness of the untreated water not to exceed 24° clarke (343PPM’s) • Purity level of the treated water approximately 98% www.meiko-uk.co.uk Page 6 270, 300 and 360 second programmes Achieves Ao 30 level of disinfection Wash temperature of 74° Rinse temperature of 83°C Door passing height of 315mm Detergent & rinse aid dosing pumps & containers Drain pump for high level waste outlet Soft start feature on wash pump Top and bottom wash and rinse system Hose and cable connection kit supplied Touch sensitive control (no switches) Digital wash & rinse temperature displays Overall Size 600mm x 600mm x 820mm high Cold fill/3 Phase connection only Class ‘A’ air gap with rinse booster pump Supplied with one 4 terrace rilsan coated basket Plinth mounted GiO module (can also be supplied as a remote unit) Self cleaning cycle following drain down Wash pump rating of 0.55kW Additional water softening is not required LIST PRICE £7,598.00 (13 amp) Alternative 4.72kW (1 phase) Alternative 6.72kW (3 phase) Option Machine with cold final rinse facility FV40.2GK GiO £7,709.00 12.26 kW 3 Phase (Cold fill) £8,707.00 Option £426.00 Fill & dump feature (FV40.2FD) Note: • Pre-treatment of the incoming water feed not necessary provided that the hardness is not more than 24° clarke, or 343 particles per million (PPM’s). • Supplied filter to be changed, interval dependent on water quality. Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Premium series front loading dishwashing washing machines. GiO models are fitted with an innovative integrated reverse osmosis rinse water module. Machines constructed throughout in type 304 (1.4301) stainless steel and fully clad to rear, sides, and base. Additional features include pressed tank with large radius coved corners, double wall construction for first class sound and heat insulation, and tented internal upper surface to prevent dripping onto clean crockery. All dishwashers are supplied with two plate racks, one cup rack and two cutlery holders. WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURERS MODEL REFERENCE FV40.2 FV40.2 with MIKE 2 electronic control and infrared data capture tool STANDARD FEATURES LOADING • • • • • • • 2.60kW (13 amp) hot fill only • • • • • • • • • • FV40.2-GiO FV40.2-GiO with MIKE 2 electronic control and infrared data capture tool • • • • • • • • • • • • • • • FV 40.2 Gio AO FV40.2 GiO AO with MIKE 2 electronic control and infrared data capture tool Thermal Disinfection Model Gio • • • • • • • • • • • • • • • • • • • • • • Technical information: Feed water temperature to be not less than 1° C and not more than 30° C. Conductivity of the untreated feed water to be no more than 1000 µs/CM Maximum hardness of the untreated water not to exceed 24° clarke (343PPM’s) • Purity level of the treated water approximately 98% www.meiko-uk.co.uk Page 7 90-120-240 second programme cycle Door passing height of 420mm 720 dinner plates per hour capacity Suitable for hot or cold water filling 13amp, 1ph, or 3ph connection Integral drain and rinse booster pump Detergent and rinse aid pumps and containers Soft start feature on wash pump Rotating wash and rinse arms Wash pump rating of 0.55kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class 'A' air gap Self cleaning cycle after drain down Overall size 600 x 600 x 820mm 90,120 and 240 second programme cycle Clear entry passing height of 420mm 720 dinner plates per hour capacity Water feed, minimum 1°C, maximum 30°C Flow pressure, between 1bar and 3bar Maximum water feed hardness 240 clarke Upper and lower rotating wash and rinse arms Detergent and rinse aid pumps and containers Connection kit includes inlet and outlet hose, cable, water filter, stop valve, nonreturn check valve, PRV and manometer Integral drain pump for high level waste Overall size 600 mm x 680mm x 820mm high Rinse water consumption of 2.6lt/basket Wash pump rating of 0.55kW Rear mounted GiO Module (can also be supplied as remote unit) Additional water softening is not required 270, 300 and 360 second programmes Achieves Ao 30 level of disinfection Wash temperature of 74° Rinse temperature of 83°C Door passing height of 420mm Detergent & rinse aid dosing pumps & containers Drain pump for high level waste outlet Soft start feature on wash pump Top and bottom wash and rinse system Hose and cable connection kit supplied Touch sensitive control (no switches) Digital wash & rinse temperature displays Cold fill/3 Phase connection only Class ‘A’ air gap with rinse booster pump Self cleaning cycle following drain down Wash pump rating of 0.55kW Additional water softening is not required Overall Size: 600 x 680 x 820mm Rear mounted Gio module (can also be supplied as remote unit) LIST PRICE £7,020.00 Alternative 4.60kW (1 phase) Alternative 6.60kW (3 phase) Option Fill and Dump Feature (FV40.2FD) 4.81kW (1 phase) £426.00 £8,550.00 Alternative 6.81kW (3 phase) 12.26 kW 3 Phase (Cold fill) Option £8,780.00 £426.00 Fill & dump feature (FV40.2FD) Note: • Pre-treatment of the incoming water feed not necessary provided that the hardness is not more than 24° clarke, or 343 particles per million (PPM’s). • Supplied filter to be changed, interval dependent on water quality. Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Premium series front loading dishwashing machine accessories. ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE PRE-700 Machine “on top” pre-rinse station to suit FV40.2, 600 x 600mm, with single pedestal cold water pre-rinse unit £2,042.00 PRE-730 As above, for 600mm x 680 machine £2,282.00 MHEMPF500ST Stand for FV40.2 dishwasher, with overall dimensions 600 x 600 x 400mm high, with 2 basket runners under. £382.00 MHEMPF500CB Cabinet base for FV40.2 with overall dimensions 600 x 600 x 400mm high and with hinged doors to front. Can be used for chemical storage or for siting compact reverse osmosis apparatus £604.00 MHEMPF500CD Mobile dolly to suit FV40.2 Dimensions: 620 x 620 x 90mm high £244.00 www.meiko-uk.co.uk Page 8 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Premium series hood type pass through dishwashing machines Machines constructed throughout in type 304 (1.4301) stainless steel and fully clad to rear, sides, and base. Additional features include pressed tank with large radius coved corners, double wall construction for first class sound and heat insulation, and tented internal upper surface to prevent dripping onto clean crockery. All dishwashers are supplied with two plate racks, one cup rack and two cutlery holders. WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING DV80.2 DV80.2 • Basket size 500mm x 500mm 5.80kW (1 phase) with MIKE 2 electronic control and infrared data capture tool • 60-90-210 second programme cycle LIST PRICE £9,309.00 • Hood passing height of 440mm • Up to 1080 dinner plates per hour • Suitable for hot or cold water filling 8.30kW (3 phase) • Integral drain and rinse booster pump • Detergent and rinse aid pumps • Soft start feature on wash pump • Rotating stainless steel wash and rinse arms • For pass through or corner operation • Wash pump rating of 0.75kW • Hose and cable connection kit Option fill & dump feature (DV80.2FD) £426.00 • Touchpad controls (no switches) • Digital wash & rinse temp displays • Aktiv-Plus double filtration system • Integral class 'A' air gap • Self cleaning cycle after drain down • Overall size 635 x 750 x 1470mm • Max height with hood fully open 2050mm DV80.2 GiO DV80.2 GiO with MIKE 2 electronic control and infrared data capture tool • • • • • • • • • • • • • • • • • • • • • www.meiko-uk.co.uk Page 9 Basket size of 500mm x 500mm 60-90-210 second programme cycle Hood passing height of 440mm Up to 1080 dinner plates per hour Suitable for cold water filling only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Rotating stainless steel wash and rinse arms For pass through or corner operation Wash pump rating of 0.75kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class 'A' air gap Self cleaning cycle after drain down Overall size 635 x 750 x 1470mm Max height with hood fully open 2050mm Additional water softening is not required Gio Module mounted on right hand side panel - can also be supplied as a remote unit. 6.00kW (1 phase) £10,770.00 8.50kW (3 phase) Option fill & dump feature (DV80.2FD) £426.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Premium series ‘Thermal Disinfection’ hood type pass through dishwashing machines The Ao value is used to define the extent of thermal disinfection without reference to a particular temperature. The Ao value is established by measuring the temperature and exposure time. Meiko thermal disinfection dishwashers achieve Ao 30. WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING DV80.2 AO DV80.2 AO • • • • • • • • • • • Basket size 500mm x 500mm 270, 300 and 360 second programmes Achieves Ao 30 level thermal disinfection Hood passing height of 440mm Wash temperature of 74° Rinse temperature of 83°C Suitable for hot or cold fill Detergent & rinse aid dosing pumps Integral drain and rinse booster pumps Soft start feature on wash pump Rotating stainless steel wash and rinse arms Touch sensitive control (no switches) Digital wash & rinse temperature displays 3 Phase connection only For pass through or corner operation Wash pump rating of 0.75kW Self cleaning cycle following drain down Two (2) plate baskets One open (1) cup rack Two (2) eight compartment cutlery baskets Overall dimensions: 635 x 750 x 1470mm Max height with hood fully open: 2050mm 13.75kW 3 phase (Cold Fill) Basket size 500mm x 500mm 270, 300 and 360 second programmes Achieves Ao 30 level thermal disinfection Hood passing height of 440mm Wash temperature of 74° Rinse temperature of 83°C Suitable for cold fill only Detergent & rinse aid dosing pumps Integral drain and rinse booster pumps Soft start feature on wash pump Rotating stainless steel wash and rinse arms Touch sensitive control (no switches) Digital wash & rinse temperature displays 3 Phase connection only For pass through or corner operation Wash pump rating of 0.75kW Self cleaning cycle following drain down Two (2) plate baskets One open (1) cup rack Two (2) eight compartment cutlery baskets Overall dimensions: 635 x 750 x 1470mm Max height with hood fully open: 2050mm Additional water softening is not required Gio Module mounted on right hand side panel (can also be supplied as remote unit). 13.96kW 3 phase (Cold Fill) • • • • • • • • • • • DV80.2 GiO AO • • • • • • • • • • • DV80.2 GiO AO • • • • • • • • • • • • • www.meiko-uk.co.uk Page 10 LIST PRICE £9,812.00 12.25kW 3 Phase (Hot Fill) Option fill & dump feature (DV80.2FD) Option fill & dump feature (DV80.2FD) £426.00 £11,004.00 £426.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Premium series hood type pass through dishwashing machines Machines constructed throughout in type 304 (1.4301) stainless steel and fully clad to floor, sides, and base. Additional features include pressed tank with large radius coved corners, double wall construction for first class sound and heat insulation, and tented internal upper surface to prevent dripping onto clean crockery. All dishwashers are supplied with two plate racks, one cup rack and two cutlery holders WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE DV120.2 DV120.2 • Basket size 500mm x 500mm 10.40kW (3 phase) hot fill £10.210.00 with MIKE 2 electronic control and infrared data capture tool • 60-90-240 second programme cycle • Hood passing height of 440mm • Up to 1080 dinner plates per hour • Suitable for hot or cold water filling • Integral drain and rinse booster pump • Detergent and rinse aid pumps Alternative 11.90kW (3 phase) cold fill • Soft start feature on wash pump • Rotating stainless steel wash and rinse arms • For pass through or corner operation • Hose and cable connection kit • Touchpad controls (no switches) Option £426.00 fill & dump feature (DV120FD) • Digital wash & rinse temp displays • Aktiv-Plus double filtration system • Combined dish and utensil washer • Integral class 'A' air gap • Self cleaning cycle after drain down • Overall size 635 x 750 x 1470mm • Height with hood fully open 2050mm • Wash pump rating 1.5kW DV120.2 GiO DV120.2 GiO with MIKE 2 electronic control and infrared data capture tool • • • • • • • • • • • • • • • • • • • • • • www.meiko-uk.co.uk Page 11 Basket size of 500mm x 500mm 60-90-240 second programme cycle Hood passing height of 440mm Up to 1080 dinner plates per hour Suitable for cold water filling only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Rotating stainless steel wash and rinse arms For pass through or corner operation Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Combined dish and utensil washer Aktiv-Plus double filtration system Integral class 'A' air gap Self cleaning cycle after drain down Overall size 635 x 750 x 1470mm Max height with hood fully open 2050mm Wash pump rating 1.5kW Additional water softening is not required Gio Module mounted on right hand side panel - can also be supplied as remote unit 12.10kW (3 phase) cold fill Option fill & dump feature £11,671.00 £426.00 (DV120FD) Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Premium series hood type pass through dishwashing machines ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE DV200.2 DV200.2 • • • • • • • • • • • • • • • • • • • Basket size 2 x 500mm x 500mm 60-90-210 second programme cycle Hood passing height of 440mm Up to 2160 dinner plates per hour Suitable for hot or cold water filling Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Rotating wash and rinse arms For pass through or corner operation Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class 'A' air gap Self cleaning cycle after drain down Overall size 1180 x 750 x 1470mm Max height with hood fully open 2050mm Wash pump rating 2 x 0.75kW 17.10kW (3 phase) hot fill £18,355.00 • • • • • • • • • • • • • • • • • • • • • Basket size 2 x 500mm x 500mm 60-90-210 second programme cycle Hood passing height of 440mm Up to 2160 dinner plates per hour Suitable for cold water filling only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Rotating wash and rinse arms For pass through or corner operation Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Combined dish and utensil washer Variotronic programme selection Integral class 'A' air gap Self cleaning cycle after drain down Overall size 1180 x 750 x 1470mm Height with hood fully open 2050mm Wash pump rating 2 x 0.75kW with MIKE 2 electronic control and infrared data capture tool DV200.2 GiO DV200.2 GiO with MIKE 2 electronic control and infrared data capture tool Alternative 20.10kW (3 phase) Option fill & dump feature (DV200.2FD) 22.40kW (3 phase) cold fill Option fill & dump feature (DV200.2FD) £426.00 £19,715.00 £426.00 • Additional water softening is not required • Gio Module mounted on right hand side panel - can also be supplied as remote unit DV200.2 RC www.meiko-uk.co.uk Stainless Steel Cladding Panel to Rear of Machine Page 12 £614.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Premium series hood type pass through dishwashing machines ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE DV200.2PW DV200.2PW Power Washer • • • • • • • • • • • • • • • • • • • Basket size 2 x 500mm x 500mm 60-90-210 second programme cycle Hood passing height of 440mm Up to 2160 dinner plates per hour Suitable for hot or cold water filling Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Rotating wash and rinse arms For pass through or corner operation Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class 'A' air gap Self cleaning cycle after drain down Overall size 1180 x 750 x 1470mm Max height with hood fully open 2050mm Wash pump rating 2 x 1.5kW 19.4kW (3 phase) hot fill £21,813.00 • • • • • • • • • • • • • • • • • • • • • • • Basket size 2 x 500mm x 500mm 60-90-210 second programme cycle Hood passing height of 440mm Up to 2160 dinner plates per hour Suitable for cold water filling only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Rotating wash and rinse arms For pass through or corner operation Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Combined dish and utensil washer Variotronic programme selection Integral class 'A' air gap Self cleaning cycle after drain down Overall size 1180 x 750 x 1470mm Max height with hood fully open 2050mm Wash pump rating 2 x 1.5kW Additional water softening is not required Gio Module mounted on right hand side panel - can also be supplied as remote unit with MIKE 2 electronic control and infrared data capture tool DV200.2 PW GiO DV200.2PW GiO Power Washer with MIKE 2 electronic control and infrared data capture tool Alternative 22.4kW (3 phase) Option fill & dump feature (DV200.2FD) 22.61kW (3 phase) cold fill Option fill & dump feature (DV200.2FD £426.00 £23,173.00 £426.00 DV200.2 SSB Stainless Steel Washing Basket with Rollers £813.00 DV200.2 RC Stainless Steel Cladding Panel to rear of machine £614.00 www.meiko-uk.co.uk Page 13 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Premium series hood type pass through dishwashing machines ORDER CODE ILLUSTRATION DESCRIPTION Automatic hood lifting device raises the hood at the end of the programme cycle. Touch sensitive switch is provided for raising and lowering of the hood by the operator. DV80.2HL DV120.2HL DV200.2HL LIST PRICE £2,760.00 See note below regarding using with AktivAir and AirConcept units. Airbox “AktivAir” integrated vapour condensation hood with double walled air duct for optimisation of the condensation process. The steam extraction is linked with the dishwasher programme. Without filters and completely maintenance free. Overall height of machine increases from 2050 mm to 2390mm. DV80.2AA DV120.2AA For models DV80.2 and DV120.2. (Cannot be used in conjunction with the automatic hood lifting device). £2,152.00 DV200.2AA For models DV200.2 and DV200.2 PW. (The automatic hood lifting device can be used). £4,262.00 DV200.2 RC-AA Stainless Steel Cladding Panel to rear of machine when fitted with AktivAir Box £1,495.00 note: not available for marine applications Point 2 AirConcept integrated air management unit with built in, self-cleaning heat recovery unit. Connected load of the dishwasher is reduced by up to 13% and the working environment is considerably improved. Machine connected to cold water supply only. Overall height of machine increases from 2050mm to 2140mm (unit cannot be used in conjunction with the automatic hood lifting device). DV80.2AC DV120.2AC For models DV80.2 and DV120.2 £2,974.00 DV80.2AC - Gio DV120.2AC - Gio For models DV80.2 GiO and DV120.2 GiO £3,535.00 DV200.2AC For models DV200.2 and DV200.2PW £5,338.00 DV200.2AC - Gio For models DV200.2 GiO and DV200.2PW GiO £6,460.00 www.meiko-uk.co.uk Page 14 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.1 Meiko Standard dishwasher entry and exit tables Manufactured throughout in type 304 stainless steel and supported on a frame and legs manufactured from 40mm square section stainless steel tube. Anti-drip edge to front and one end and 10mm raised tap ledge with a width of 160mm to rear. Provided with 30mm adjustable feet. Tables up to 1200mm long supplied with one leg section, over 1200mm with two leg sections. ORDER CODE DESCRIPTION AND ILLUSTRATIONS MODEL MHESDT.EN700 Machine entry table complete with a 500 x 400 x 250mm deep pre-rinse sink bowl, waste outlet with overflow and a 300mm high fully welded backsplash to rear. Standard height of 850mm. MHE-SDT.EN070 700 x 700mm £1,395.00 MHE-SDT.EN120 1200 x 700mm £1,512.00 MHE-SDT.EN160 1600 x 700mm £1,612.00 MHE-SDT.EN180 1800 x 700mm £1,670.00 MHE-SDT.EN210 2100 x 700mm £1,760.00 MHE-SDT.EX070 700 x 700mm £611.00 MHE-SDT.EX120 1200 x 700mm £727.00 MHE-SDT.EX160 1600 x 700mm £824.00 MHE-SDT.EX180 1800 x 700mm £888.00 MHE-SDT.EX210 2100 x 700mm £976.00 MHESDT.EX700 MHESDT-ENEX MHESDT.BR MHESDT.SC Machine exit table with backsplash, without sink bowl DIMENSIONS LIST PRICE Optional features Stainless steel undershelf Stainless steel undershelf Stainless steel undershelf Stainless steel undershelf Stainless steel undershelf MHE-SDT.US070 MHE-SDT.US120 MHE-SDT.US160 MHE-SDT.US180 MHE-SDT.US210 Set of 4 basket runners MHE-SDT-BR £220.00 Dry waste scrapping chute with rubber block MHE-SDT-SC £136.00 700mm 1200mm 1600mm 1800mm 2100mm long long long long long £104.00 £217.00 £246.00 £275.00 £304.00 For pre-rinse spray unit see page 55 www.meiko-uk.co.uk Page 15 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Marine specification front loading and pass through dishwashing machines Machines constructed throughout in type 304 (1.4301) stainless steel and fully clad to rear, sides, and base. Additional features include pressed tank with large radius coved corners, double wall construction for first class sound and heat insulation, and tented internal upper surface to prevent dripping onto clean crockery. All dishwashers are supplied with two plate racks, one cup rack and two cutlery holders. Marine machines have parts warranty only. ORDER CODE MANUFACTURER MODEL REFERENCE STANDARD FEATURES LOADING FV40.2M FV40.2M marine specification with MIKE 2 electronic control and infrared data capture tool • • • • • • • Basket size 500mm x 500mm 90-120-240 second programme cycle Door passing height of 420mm Up to 40 baskets per hour capacity 3ph connection only Suitable for hot or cold water filling Rating of 440v/60hz/3ph-no neutral, or 400v/50hz/3ph-no neutral as standard Other voltages available at extra cost Detergent and rinse aid pumps Soft start feature on wash pump Rotating upper and lower rinse arms Rotating upper and lower wash arms Wash pump rating of 0.55kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Self cleaning cycle after drain down Overall size 600 x 600 x 895mm 8.47kW (3 phase) cold fill £8,626.00 Basket size 500mm x 500mm 60-90-210 second programme cycle Door passing height of 440mm Up to 60 baskets per hour capacity 3ph connection only Suitable for hot or cold water filling Rating of 440v/60hz/3ph-no neutral, or 400v/50hz/3ph-no neutral as standard Other voltages available at extra cost Detergent and rinse aid pumps Soft start feature on wash pump Rotating upper and lower rinse arms Rotating upper and lower wash arms Wash pump rating of 0.73kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Self cleaning cycle after drain down Overall size 635 x 750 x 1470mm Max height with hood fully open 2050mm 12.69kW (3 phase) cold fill £12,921.00 • • • • • • • • • • • DV80.2M DV80.2M marine specification with MIKE 2 electronic control and infrared data capture tool • • • • • • • • • • • • • • • • • • • www.meiko-uk.co.uk Page 16 LIST PRICE Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Meiko glass and dish washing baskets Glass and dish washing baskets offered by Meiko UK are manufactured by Theodore Fries AG of Austria. These racks are renowned worldwide for their durability and for the first class washing results achieved, due to the open and accessible design that enables efficient penetration of the wash water and fresh water final rinse water. ORDER CODE DESCRIPTION £54.00 Type TH For plates up to 260mm high Glass basket 400 x 400 £75.00 Type P400 Plate insert for 10 plates Type LC up to 240mm Glass basket 400 x 400 £84.00 Type Rolli Basket Dolly 400 x 400 with dripping trough Type LD3 up to 260mm Glass basket 400 x 400 £98.00 Type L 402 65mm high Open base rack 400 x 400 With narrow mesh £26.00 ORDER CODE DESCRIPTION LIST PRICE Type LA up to 65mm Glass basket 400 x 400 Type LB up to 170mm 400/AW www.meiko-uk.co.uk Page 17 LIST PRICE £24.00 £5.00 £350.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Meiko glass and dish washing baskets ORDER CODE DESCRIPTION ORDER CODE DESCRIPTION Type A up to 75mm Glass basket 500 x 500 £43.00 Type NK 75mm high Open basket 500 x 500 £30.00 Type B up to 130mm Glass basket 500 x 500 £60.00 Type NK110 110mm high Open basket 500 x 500 £60.00 Type C up to 180mm Glass basket 500 x 500 £73.00 Type CR-140 Open basket 500 x 500 £67.00 Type D up to 230mm Glass basket 500 x 500 £82.00 Type CR-170 Open basket 500 x 500 £75.00 Type D3 up to 290mm Glass basket 500 x 500 £102.00 Type P18-12 70mm high Plate basket 500 x 500 £30.00 Type GP G.P. Basket, wire coated 500 x 500 £222.00 Type TiltClip Tilting device for 500 x 500 glass & cup baskets £0.50 Type CCC Colour coding clip £0.70 www.meiko-uk.co.uk LIST PRICE Page 18 LIST PRICE Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Meiko glass and dish washing baskets ORDER CODE DESCRIPTION Type TE3 up to 75mm 3 row inclined cup insert £30.00 Type WHT4 Open basket 500 x 500 with stainless steel insert for 4 x GN1/1 containers. 100mm deep. Open 1 end. Type TE4 4 row inclined cup insert £30.00 Type WHT5 Open basket 500 x 500 with stainless steel insert for 5 x GN1/1 containers. 65mm deep. Open 1 end. Type TE5 5 row inclined cup insert £30.00 Type UK Plate basket 500 x 500, Blue £30.00 Type PTE Open basket 500 x 500 with plastic coated insert for 9 large plates. £64.00 Type P15 Plate basket 500 x 500 £35.00 Type GN1/1 Open basket 500 x 500 with plastic coated wire insert for 9 1/1 trays, open 2 ends £40.00 Type BK 70mm high Open basket 500 x 500 £34.00 Type NKT Open basket 500 x 500 with plastic coated wire insert for 9trays, open 1 end £88.00 Type BKS 260mm high 8 compartment basket 430 x 210 x 260mm high £16.00 www.meiko-uk.co.uk LIST PRICE Page 19 ORDER CODE DESCRIPTION LIST PRICE £46.00 £46.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.2 Meiko glass and dish washing baskets ORDER CODE DESCRIPTION LIST PRICE Type UKT Tray basket 500 x 500 75mm high with stainless steel edge to open end £52.00 ORDER CODE DESCRIPTION LIST PRICE Type ROLB Platform cart with removable drip tray and push bar 500 x 500 £594.00 Type ABH Plastic cover for 500 x 500 racks, maximum height 1.6 metres £108.00 Type DROLB Platform cart with 2 push bars, to hold 2 stacks of 500 x 500 glass racks. Plastic coated terrace style washing basket TYPE GV 50/22 4 Terrace, 150mm H. £106.00 TYPE GV 50/20 4 Terrace, 220mm H. £106.00 TYPE GV 50/23 5 Terrace, 150mm H. £82.00 TYPE GV 50/21 5 Terrace, 220mm H. £82.00 NHG 500 Hold down grid 500 x 500 £53.00 Stainless steel wire retaining grid to hold in place light items Type ROL Platform cart with removable drip tray, without push bar 500 x 500 www.meiko-uk.co.uk Page 20 £350.00 £1,222.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.3 Premium series front loading utensil and potwashing machines Machines constructed throughout in type 304 (1.4301) stainless steel and clad to sides and base. Additional features include pressed tank with large radius coved corners, double wall construction for first class sound and heat insulation, and tented internal upper surface to prevent dripping onto clean utensils. Supplied with two open baskets, 130mm high. See page 30 for range of 600 x 500mm washing baskets for FV60.2. WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING FV60.2 FV60.2 with MIKE 2 electronic control and infrared data capture tool • Basket size 500mm x 500mm 2.6kW (13 amp) (Hot fill only) • 90-120-240 second programme cycle • Door passing height of 420mm • Up to 40 baskets per hour capacity • Suitable for hot or cold water filling • 13amp, 1ph, or 3ph connection • Integral drain and rinse booster pump • Detergent and rinse aid pumps • Detergent and rinse aid containers • Soft start feature on wash pump • Rotating upper and lower rinse arms LIST PRICE £7,624.00 Alternative 4.6kW (1 phase) Alternative 6.6kW (3 phase) • Rotating upper and lower wash arms • Wash pump rating of 0.55kW • Hose and cable connection kit • Touchpad controls (no switches) • Digital wash & rinse temp displays • Aktiv-Plus double filtration system • Integral class ‘A’ air gap Option fill & dump feature (FV60.2WC) £426.00 • Self cleaning cycle after drain down • Overall size 600 x 680 x 820mm FV60.2GiO FV60.2GiO with MIKE 2 electronic control and infrared data capture tool • Basket size 500mm x 500mm • 90-120-240 second programme cycle • Door passing height of 420mm • Up to 40 baskets per hour capacity • Suitable for cold water filling only • 1ph or 3ph connection 4.80kW (1 phase) £8,568.00 Alternative 6.80kW (3 phase) • Integral drain and rinse booster pump • Detergent and rinse aid pumps • Detergent and rinse aid containers • Soft start feature on wash pump • Rotating upper and lower rinse arms • Rotating upper and lower wash arms • Wash pump rating of 0.55kW • Hose and cable connection kit Option fill & dump feature (FV60.2WC) £426.00 • Touchpad controls (no switches) • Digital wash & rinse temp displays • Aktiv-Plus double filtration system • Integral class ‘A’ air gap • Self cleaning cycle after drain down • Overall size 600 x 680 x 820mm • Additional water softening is not required • Gio module available for plinth mounting or as remote unit only www.meiko-uk.co.uk Page 21 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.3 Premium series front loading utensil and potwashing machines Machines constructed throughout in type 304 (1.4301) stainless steel and fully clad to sides and base. Additional features include pressed tank with large radius coved corners, double wall construction for first class sound and heat insulation, and tented internal upper surface to prevent dripping onto clean utensils. Supplied with one stainless steel basket on easy glide nylon wheels. WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE FV130.2 FV130.2 (Electric Heating) • • • • • • • • • • • • • • • • • • • • • 8.67kW (3 phase) hot fill £16,088.00 with MIKE 2 electronic control and infrared data capture tool FV130.2-TD Option FV130.2GiO FV130.2GiO (Electric Heating) Alternative 14.67kW (3 phase) cold fill Increased tank temperature of 71°C to £484.00 enable thermo label testing with MIKE 2 electronic control and infrared data capture tool www.meiko-uk.co.uk Basket size 850mm x 700mm 120-240-360 sec. programme cycle Door passing height of 740mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for hot or cold water filling 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2.60kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1030 x 895 x 1790mm Height with door fully open 2170mm Page 22 • • • • • • • • • • • • • • • • • • • • • • • Basket size 850mm x 700mm 120-240-360 sec. programme cycle Door passing height of 740mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for cold water filling only 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2.60kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1030 x 895 x 1790mm Height with door fully open 2170mm Additional water softening is not required Gio module located on right hand side panel, can also be supplied as a remote unit 14.88kW (3 phase) cold fill £17,302.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.3 Premium series front loading utensil and potwashing machines ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE FV130.2STEAM FV130.2 (Steam Heating) • Basket size 850mm x 700mm 2.6kW (3 phase) £18.816.00 2.81kW (3 phase) £20,176.00 • 120-240-360 sec. programme cycle with MIKE 2 electronic control and infrared data capture tool • Door passing height of 740mm • Up to 30 baskets per hour capacity • Filters over full wash tank surface • Suitable for hot or cold water filling • 3ph connection only • Integral drain and rinse booster pump • Detergent and rinse aid pumps • Soft start feature on wash pump • Wash basket made in stainless steel • Oscillating wash arms • Wash pump rating of 2.60kW • Hose and cable connection kit • Touchpad controls (no switches) • Digital wash & rinse temp displays • Aktiv-Plus double filtration system • Integral class ‘A’ air gap • Self cleaning cycle after drain down • Overall size 1030 x 895 x 1790mm • Height with door fully open 2170mm FV130.2GiO -STEAM FV130.2GiO (Steam Heating) with MIKE 2 electronic control and infrared data capture tool www.meiko-uk.co.uk Page 23 • • • • • • • • • • • • • • • • • • • • • • • Basket size 850mm x 700mm 120-240-360 sec. programme cycle Door passing height of 740mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for cold water filling only 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2.60kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1030 x 895 x 1790mm Height with door fully open 2170mm Additional water softening is not required Gio module located on right hand side panel, can also be supplied as remote unit Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.3 Premium series front loading utensil and potwashing machines ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES FV250.2 FV250.2 (Electric Heating) • • • • • • • • • • • • • • • • • • • • • with MIKE 2 electronic control and infrared data capture tool FV250.2-TD Basket size: 1310 x 700mm 120-240-480 sec. programme cycle Door passing height of 890mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for hot or cold water filling 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2 x 2.20kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1490 x 895 x 1935mm Height with door fully open 2490mm LOADING LIST PRICE 16.47kW (3 phase) hot fill £24,740.00 Alternative 22.73kW (3 phase) cold fill Increased tank temperature of 71°C to Option £484.00 enable thermo label testing FV250.2GiO FV250.2GiO (Electric Heating) with MIKE 2 electronic control and infrared data capture tool www.meiko-uk.co.uk Page 24 • • • • • • • • • • • • • • • • • • • • • • • Basket size: 1310 x 700mm 120-240-480 sec. programme cycle Door passing height of 890mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for cold water filling only 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2 x 2.20kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1490 x 895 x 1935mm Height with door fully open 2490mm Additional water softening is not required Gio module mounted on right hand side panel, can also be supplied as remote unit 22.94kW (3 phase) £26,270.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.3 Premium series front loading utensil and potwashing machines ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE FV-250.2 FV250.2 (Steam Heating) • • • • • • • • • • • • • • • • • • • • • Basket size: 1310 x 700mm 120-240-480 sec. programme cycle Door passing height of 890mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for hot or cold water filling 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2 x 2.20kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1490 x 895 x 1935mm Height with door fully open 2490mm 4.4kW (3 phase) hot or cold fill £26,820.00 • • • • • • • • • • • • • • • • • • • • • • • Basket size: 1310 x 700mm 120-240-480 sec. programme cycle Door passing height of 890mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for cold water filling only 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2 x 2.20kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1490 x 895 x 1935mm Height with door fully open 2490mm Additional water softening is not required Gio module mounted on right hand side panel, can also be supplied as remote unit 4.61kW (3 phase) cold fill only £27,991.00 with MIKE 2 electronic control and infrared data capture tool FV-250.2GiO FV250.2GiO (Steam Heating) with MIKE 2 electronic control and infrared data capture tool www.meiko-uk.co.uk Page 25 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.3 Premium series pass through utensil washing machines Machines constructed throughout in type 304 (1.4301) stainless steel and fully clad to floor sides and base. Additional features include pressed tank with large radius coved corners, double wall construction for first class sound and heat insulation, and tented internal upper surface to prevent dripping onto clean utensils. See Page 30 for range of 600 x 500mm washing baskets for DV125.2. WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURER MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE DV125.2 DV125.2 with MIKE 2 electronic control and infrared data capture tool • Accepts 500mm x 500mm, 540mm x 500mm, 600mm x 400mm, 650mm x 500mm baskets • 60, 90 and 210 second programmes • Internal basket guides adjustable on site for corner or straight operation • Removeable basket holder for ease of cleaning • Suitable for hot or cold fill • Detergent & rinse aid dosing pumps incorporated • Wash and rinse system top and bottom • Hose and cable connection kit supplied • Touch sensitive control (no switches) • Digital wash & rinse temp displays • Class ‘A’ air gap with rinse booster pump • Self cleaning cycle following drain down • Wash pump rating 1.5 kW • Aqua-stop system for water leak detection • Aktiv-plus double filtration of wash water • Perforated covers over wash tank • Integral drain pump for high level waste • Stainless stell rear cladding panel • Four (4) utensil washing racks, 130mm high • Additional wash jets for improved cleaning of large wash ware • Clear passing height of 555mm • Overall size 730 x 750 x 1590mm high • Height with hood open 2200mm 10.4kW (3 phase) hot fill £13,885.00 DV125.2GiO DV125.2 GiO with MIKE 2 electronic control and infrared data capture tool www.meiko-uk.co.uk Page 26 • Accepts 500mm x 500mm, 540mm x 500mm, 600mm x 400mm, 650mm x 500mm baskets • 60, 90 and 210 second programmes • Internal basket guides adjustable on site for corner or straight operation • Removeable basket holder for ease of cleaning • Suitable for cold fill only • Detergent & rinse aid dosing pumps incorporated • Wash and rinse system top and bottom • Hose and cable connection kit supplied • Touch sensitive control (no switches) • Digital wash & rinse temp displays • Class ‘A’ air gap with rinse booster pump • Self cleaning cycle following drain down • Wash pump rating 1.5 kW • Aqua-stop system for water leak detection • Aktiv-plus double filtration of wash water • Perforated covers over wash tank • Integral drain pump for high level waste • Stainless steel rear cladding panel • Four (4) utensil washing racks, 130mm high • Additional wash jets for improved cleaning of large wash ware • Clear passing height of 555mm • Overall size 730 x 750 x 1590mm high • Height with hood open 2200mm • Additional water softening is not required • Gio module mounted on right hand side panel, can also be supplied as remote unit Alternative 11.8kW (3 phase) cold fill 12.1kW (3 phase) cold fill £15,076.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.3 Premium series pass through utensil washing machines ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE DV270.2 DV270.2 (Electric Heating) • • • • • • • • • • • • • • • • • • • • • 16.73kW (3 phase) hot fill £27,886.00 with MIKE 2 electronic control and infrared data capture tool Basket size 1310mm x 690mm 120-240-480 sec. programme cycle Door passing height of 650mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for hot or cold water filling 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2 x 2.20kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1490 x 995 x 1792mm Height with door fully open 2510mm DV270.2TD Option Increased tank temperature of 71oC to enable thermo label testing DV270.2GiO DV270.2GiO (Electric Heating) • • • • • • • • • • • • • • • • • • • • • • • with MIKE 2 electronic control and infrared data capture tool Stainless steel cladding panel to rear of machine DV270.2RC www.meiko-uk.co.uk Basket size 1310mm x 690mm 120-240-480 sec. programme cycle Door passing height of 650mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for cold water filling only 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2 x 2.20kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1490 x 995 x 1792mm Height with door fully open 2510mm Additional water softening is not required Gio module mounted on right hand side panel, can also be supplied as remote unit Page 27 Alternative 22.73kW (3 phase) cold fill £484.00 22.94kW (3 phase) cold fill £29,416.00 £917.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.3 Premium series pass through utensil washing machines ORDER CODE MANUFACTURERS MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE DV270.2STEAM DV270.2 (Steam Heating) • • • • • • • • • • • • • • • • • • • • • Basket size 1310mm x 690mm 120-240-480 sec. programme cycle Door passing height of 650mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for hot or cold water filling 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2 x 2.20kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1490 x 995 x 1792mm Height with door fully open 2510mm 4.4kW (3 phase) hot or cold fill £29,616.00 • • • • • • • • • • • • • • • • • • • • • • • Basket size 1310mm x 690mm 120-240-480 sec. programme cycle Door passing height of 650mm Up to 30 baskets per hour capacity Filters over full wash tank surface Suitable for cold water filling only 3ph connection only Integral drain and rinse booster pump Detergent and rinse aid pumps Soft start feature on wash pump Wash basket made in stainless steel Oscillating wash arms Wash pump rating of 2 x 2.20kW Hose and cable connection kit Touchpad controls (no switches) Digital wash & rinse temp displays Aktiv-Plus double filtration system Integral class ‘A’ air gap Self cleaning cycle after drain down Overall size 1490 x 995 x 1792mm Height with door fully open 2510mm Additional water softening is not required Gio module mounted on right hand side panel, can also be supplied as remote unit 4.6kW (3 phase) cold fill £30,976.00 with MIKE 2 electronic control and infrared data capture tool DV270.2GiO -STEAM DV270.2GiO (Steam Heating) with MIKE 2 electronic control and infrared data capture tool Stainless steel cladding panel to rear of machine DV270.2RC www.meiko-uk.co.uk Page 28 £917.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.3 Premium series pass through utensil washing machines ORDER CODE ILLUSTRATION DESCRIPTION LIST PRICE DV125.2HL DV270.2HL Automatic hood lifting device raises the hood at the end of the programme cycle. Touch sensitive switch is provided for raising and lowering of the hood by the operator. For DV125.2 and DV270.2 Models £2,760.00 DV125AA Airbox “AktivAir” integrated vapour condensation hood for DV 125.2 with double walled air duct for optimisation of the condensation process. The steam extraction is linked with the dishwasher programme. Without filters and completely maintenance free. Overall height of machine increases from 2200mm to 2500mm. £2,331.00 Note: Can not be used in conjunction with the automatic hood lifting device. DV125.2AC Point 2 AirConcept integrated air management unit with built in, self-cleaning heat recovery unit for DV125.2 Connected load of the dishwasher is reduced by up to 13% and the working environment is considerably improved. Machine connected to cold water supply only. Overall height of machine increases from 2050mm to 2260mm (unit cannot be used in conjunction with the automatic hood lifting device). £3,105.00 DV125.2AC - Gio For model fitted with Gio unit £3,666.00 DV125.2RC - AA Stainless steel cladding panel to rear of machine fitted with AktivAir box £1,063.00 www.meiko-uk.co.uk Page 29 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.3 Additional utensils washing baskets ORDER CODE MODEL FEATURES LIST PRICE TYPE XL-B 600 x 500 x 160mm high standard open washing basket with a useable internal height of 120mm. Suitable for FV60.2 and DV125.2 utensil washers. £61.00 TYPE XL-T 600 x 500 x 120mm high basket with a capacity of 10 GN 1/1 trays. Suitable for FV60.2 and DV125.2 utensil washers. £61.00 TYPE XL-P 600 x 500 x 120mm high basket with a capacity of 22 large plates (up to 285mm D64). Suitable for FV60.2 and DV125.2 utensil washers. £61.00 FV130.2 BV85 Stainless steel washing basket provided with lateral rollers on base, size 850 x 700mm. £687.00 FV250.2 BV131 Stainless steel washing basket provided with lateral rollers on base, size 1310 x 700mm. £848.00 DV270.2 BV131 Stainless steel washing basket provided with lateral rollers on base, size 1310 x 690mm. £848.00 FVDV.2BV50 Stainless steel insert for accommodating up to 11 baking sheets. Note : insert suitable for all baskets £509.00 www.meiko-uk.co.uk Page 30 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.4 Model K160 Compact rack transport machine offering a throughput capacity of 80 baskets (1,440) plates per hour. Provided with digital temperature indication for wash and rinse and with swivelling central electrical switch box located within the body of the machine. • • • • • • • • • Emergency-off button at eye level at cleans end Four (4) standard 500 x 500mm plate baskets Two (2) standard 500 x 500mm cup/bowl baskets Four (4) eight compartment cutlery washing baskets Integral pressure reducing valve on water inlet Rinse-aid mixing chamber for up to 70% saving Stainless steel perforated strainer over wash tank Incorporated non-return valve on fresh water inlet Working height 850mm MODEl K160 AK1 IllUSTRATED TOTAL CONNECTED LOAD ORDER CODE MANUFACTURERS MODEL REFERENCE LENGTH WARM FILL COLD FILL RACKS/HR LIST PRICE K160-01 K160-AK1 Basic machine with extract canal and 0.11kW integral axial fan. 1450mm 23.83kW 35.83kW Up to 80 £19,329.00 K160-BCS Basket crowding switch for fitting to end of exit table £548.00 See page 34 for drying & heat recovery (WR1) options 1.4 Model K160Pi Compact rack transport machine offering a throughput capacity of 105 baskets (1,890) plates per hour. Provided with digital temperature indication for wash and rinse and with swivelling central electrical switch box located within the body of the machine. Integral 8 litre fresh water rinse tank. • • • • • • • • • Emergency-off button at eye level at cleans end Four (4) standard 500 x 500mm plate baskets Two (2) standard 500 x 500mm cup/bowl baskets Four (4) eight compartment cutlery washing baskets Integral pressure reducing valve on water inlet Rinse-aid mixing chamber for up to 70% saving Stainless steel perforated strainer over wash tank Incorporated non-return valve on fresh water inlet Working height 850mm MODEl K160PI WR1 IllUSTRATED TOTAL CONNECTED LOAD ORDER CODE MANUFACTURERS MODEL REFERENCE LENGTH WARM FILL COLD FILL RACKS/HR LIST PRICE K160-01 K160Pi-AK1 Basic machine with extract canal and 0.11kW integral axial fan. 1450mm 24.83kW 36.38kW Up to 105 £19,852.00 K160-BCS Basket crowding switch for fitting to end of exit table £548.00 See page 34 for drying & heat recovery (WR1) options www.meiko-uk.co.uk Page 31 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.5 Due to the modular construction technique, when required, the K-Tronic basket transport machine can be provided with factory prepared separations to assist with off-loading and moving into and around difficult access sites. Costs for individual separations can be found within the standard machine accessory pages, however the cost for re-assembly at site will be identified within our installation pricing summary. WRAS approval numbers & details can be found at the rear of the price list. CODE MODULE DESCRIPTION CAPACITY KV V Compact prewash Standard prewash 20lt 42lt 600mm 750mm 0.50kW pump 0.50kW pump CSS TOP Chemical saving system (machine length increased by 500mm) 42lt 750mm 0.70kW pump HWZ 1 HWZ 2 Main wash tank Main wash and rinse tank 90lt 90lt 800mm 1200mm 1.70kW pump 1.70kW pump P-NSP Double pumped final rinse 45lt 400mm 0.50kW pump TR1 TR2 TR3 low energy 3.0kw drying section low energy 3.0kw drying section low energy 3.0kw drying section (to be mounted on an ET curve) 600mm 900mm 870mm 0.31kW fan 0.31kW fan 0.31kW fan AK1 WR1 WP2 WP4 Vapour suction canal with fan Heat recovery condensing unit 4.0kW heat pump module with extract fan 6.0kW heat pump module with extract fan Pi Double pumped final rinse integral within the HWZ 2 rinse tank. (Machine length reduced by 400mm) www.meiko-uk.co.uk Page 32 LENGTH 820mm 820mm 1700mm 1700mm PUMPS/FANS 0.11kW 0.11kW 4.11kW 6.11kW fan fan compressor/fan compressor/fan Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.5 K200 Series 2010 (AK1/WR1) Free issue basket crowding switch for table end Fresh water interval switching (auto-timer) device Incorporated main switch on electrical cabinet Double wall insulation of wash and rinse tanks Incorporated water byelaws approved break tank Emergency-off button located on electrical cabinet Four (4) standard 500 x 500mm plate baskets Two (2) standard 500 x 500mm cup/bowl baskets Four (4) eight compartment cutlery washing baskets 1st speed equates to DIN 10510 washing standard Centrally connected waste pipework from all tanks 850 • • • • • • • • • • • 2180 (WP2) All machines have double pumped fresh water final rinse. Provided with 3 speed, pole-changeable basket transport system and MIKE 3 electronic control system. MODEl K200KVPi-AK1 IllUSTRATED TOTAL CONNECTED LOAD ORDER CODE STANDARD FEATURES LENGTH WARM FILL COLD FILL MIN/MAX RACKS/HR LIST PRICE K200P Single wash tank machine with 400mm wide double pumped rinse tank. Basic model with extract canal and 0.11kW integral fan. 1950mm 30.33kW 47.33kW 100/150 £23,403.00 K200PI Single wash tank machine with shortened double pumped rinse tank. Basic model with extract canal and 0.11kW integral fan. 1550mm 30.33kW 47.33kW 100/150 £23,403.00 K200KVP Two wash tank machine with compact pre-wash, main wash and 400mm wide double pumped rinse tank. Basic model with extract canal and 0.11kW integral fan. 2300mm 30.85kW 47.85kW 130/200 £30,521.00 K200KVPI Two wash tank machine with compact pre-wash, main wash and shortened double pumped rinse tank. Basic model with extract canal and 0.11kW integral fan. 1900mm 30.85kW 47.85kW 130/200 £30,521.00 K200VP Two wash tank machine with medium duty pre-wash, main wash and 400mm wide double pumped rinse tank. Basic model with extract canal and 0.11kW integral fan. 2450mm 30.85kW 49.65kW 140/210 £36,078.00 K200VPI Two wash tank machine with medium duty pre-wash, main wash and shortened double pumped rinse tank. Basic model with extract canal and 0.11kW integral fan 2050mm 30.85kW 49.65kW 140/210 £36,078.00 www.meiko-uk.co.uk Page 33 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.5 K-Tronic series, standard machine accessories ORDER CODE MODEL REFERENCE AND DESCRIPTION K-WR1 Meiko WR1 heat recovery condenser with axial fan and with standard copper pipe for softened final rinse water £3,732.00 K-WR1-CNS Meiko WR1-CNS heat recovery condenser with axial fan and with stainless steel pipe for reverse osmosis final rinse water. Additional cost. £3,486.00 K-WP2 Meiko WP2 S4.0 heat pump module with a 4.0kW condenser £10,181.00 K-WP4 Meiko WP4 S6.0 heat pump module with a 6.0kW condenser £20,012.00 K-ABB Meiko Airbox basic cooled air diffusion box without louvres K-ABP Meiko Airbox Plus cooled air diffusion box with louvres £1,521.00 K-TR1 Meiko TR1 heated drying section for pass through operation, 600mm long £6,162.00 K-TR2 Meiko TR2 heated drying section for pass through operation, 900mm long £7,463.00 K-TR3 Meiko TR3 heated drying section for 90° corner operation, 870mm x 870mm £4,458.00 K-TR3/BEV Meiko TR3 heated drying section for 90° corner operation, 870mm x 870mm with bevelled edge £4,970.00 K-01 CSS Basic chemical saving system with 50% detergent reduction K-02 CSS Top chemical saving system with 80% detergent reduction K-03 low pressure steam heating of machine, 0.3bar to 2.0bar K-04 Cold water filling of an electric or steam heated machine £799.00 K-05 Factory prepared separation between 2 wash tanks £580.00 K-06 Factory prepared separation between final rinse and heated drying section £580.00 K-07 Electrical control panel removed for ease of building access £241.00 K-08 Rear of machine provided with stainless steel cladding for top mounted services entry £1,416.00 K-09 Extension of stainless steel cladding from top of machine into ceiling void, per 100mm £1,026.00 K-10 Hinged door for K200Pi, K200KVPi and K200VPi in place of standard counterbalanced door £1,306.00 K-11 Hinged door for K200P, K200KVP and K200VP in place of standard counterbalanced door £1,391.00 K-12 Manual frost protection device with electrically operated shutter controlled from machine K-13 Thermo-label testing facility for a surface contact temperature of 71° K-14 Manual switching on control panel for selection of soft water or reverse osmosis water final rinsing £374.00 K-15 CC log for download of machine operating standard data to a hand held PDA via infrared £1,075.00 K-16 CC Insight for download of machine operating advanced data to a remotely sited PC £5,329.00 www.meiko-uk.co.uk Page 34 LIST PRICE £585.00 £812.00 £14,706.00 £3,988.00 £432.00 £1,701.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.5 K-Tronic series manual glide and mechanised table solutions ORDER CODE AE-730 AE-1000 AE-100 ET90/01 ET180/03 ET90/02 ET180/04 KTRH580ET/1100 KTRH580ET/1600 KTRH580ET/210 KTRH580ET/2600 KTRH1920010 ET/ATM MANUFACTURERS MODEL REFERENCE ILLUSTRATION AE-700 catch peg auto-feeder 730 x 700mm automatic catch peg basket transport table complete. 1000 x 700mm automatic catch peg basket transport table complete. Special length automatic catch peg basket transport table, per 100mm ET spoke wheel curves 870 x 870mm driven spoke wheel curve powered from transport motor of dishwashing machine. 870 x 1460mm driven spoke wheel curve powered from transport motor of dishwashing machine. 870 x 870mm driven spoke wheel curve powered from transport motor of dishwashing machine and with chamfered edge. 870 x 1460mm driven spoke wheel curve powered from transport motor of dishwashing machine and with two (2) bevelled edges. KTRH-580/ET swivelling roller table 1100 x 580mm manual glide outlet roller table, detachable from spoke wheel outlet curve. 1600 x 580mm manual glide outlet roller table, detachable from spoke wheel outlet curve. 2100 x 580mm manual glide outlet roller table, detachable from spoke wheel outlet curve. 2600 x 580mm manual glide outlet roller table, detachable from spoke wheel outlet curve. Bank of 3 basket runners mounted below the table. Price per bank. Additional catch peg transport motor for auto basket feed table in excess of 1500mm long, or when a 90 or 180 degree feeding curve has been incorporated. www.meiko-uk.co.uk Page 35 LIST PRICE £1,500.00 £2,450.00 £245.00 £4,286.00 £5,882.00 £4,838.00 £7,037.00 £1,500.00 £1,916.00 £2,505.00 £2,844.00 £156.00 £4,700.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.5 K-Tronic series manual glide and mechanised table solutions continued ORDER CODE MANUFACTURERS MODEL REFERENCE KTRH-580/1100 KTRH-580/1600 KTRH-580/2100 KTRH-580/2600 KTRH-580/ SPECIAL KTRH-1920010 KTRH-580 stationary roller table 1100 x 580mm manual glide outlet roller table. 1600 x 580mm manual glide outlet roller table. 2100 x 580mm manual glide outlet roller table. 2600 x 580mm manual glide outlet roller table. Special length manual glide discharge roller table per 100mm Bank of 3 basket runners mounted below. Price per bank. KTRH-700/1100 KTRH-700/1600 KTRH-700/2100 KTRH-700/2600 KTRH-700/ SPECIAL KTRH-1920010 KTRH-700 stationary roller table 1100 x 700mm manual glide outlet roller table. 1600 x 700mm manual glide outlet roller table. 2100 x 700mm manual glide outlet roller table. 2600 x 700mm manual glide outlet roller table. Special length manual glide discharge roller table per 100mm Bank of 3 basket runners mounted below the table. Price per bank. KTK-580 KTK-700 KTK-2182002 KTK-2182017 KTK-2182007 KTK-2182015 KTK-2182012 KTK-2182009 KTK-2182006 KTK-2182021 KTK-2182031 KTK-2182032 ILLUSTRATION LIST PRICE £1,332.00 £1,698.00 £2,244.00 £2,651.00 £138.00 £156.00 £1,578.00 £1,969.00 £2,244.00 £2,748.00 £150.00 £156.00 KTK-580 catch peg table 1000 x 580mm automatic catch peg basket transport table. Price per 100mm £244.00 KTK-700 catch peg table 1000 x 700mm automatic catch peg basket transport table. Price per 100mm £251.00 Table components and fittings for KTRH-700 and KTK-700 tables. Meiko KTK-2182002 inset sink bowl with size 500 x 400 x 250mm deep Meiko KTK-2182017 inset sink bowl with size 300 x 500 x 250mm deep Meiko KTK-2182007 stand pipe and corner strainer for inset sink bowl Meiko KTK-2182015 hot and cold pre-rinse shower spray unit with add-on tap Meiko KTK-2182012 hot and cold swivel mixer tap Meiko KTK-2182009 fully welded 300mm high backsplash, per 100mm Meiko KTK-2182006 valance panel to front of sink bowl, per 100mm Meiko KTK-2182021 waste scrap chute inset in table surface Meiko KTK-2182031 louvred stainless steel undershelf, per metre Meiko KTK-2182032 solid pattern stainless steel undershelf, per metre www.meiko-uk.co.uk Page 36 £842.00 £1,015.00 £78.00 £821.00 £193.00 £36.00 £21.00 £254.00 £200.00 £200.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.5 Forward sorting stations Basket sorting station for tray clearing and stripping operations and with integrated catch peg transport system and sloped sorting surface falling to a removeable perforated strainer box. Constructed throughout in high grade type 304 (1.4301) stainless steel and supported on a frame of 40mm square section stainless steel tube for strength and rigidity. ORDER CODE KTS-K 1.1 KTS-K 1.2 KTS-K 1.3 KTS-K 1.4 KTS-K 1.4.1 MANUFACTURERS MODEL REFERENCE ILLUSTRATION Basket sorting stations with integrated catch peg basket transport stations Sorting station for 3 baskets and with an overall length of 1785mm Sorting station for 4 baskets and with an overall length of 2325mm Sorting station for 5 baskets and with an overall length of 2865mm Sorting station for 6 baskets and with an overall length of 3420mm Additional catch peg table length, per 100mm LIST PRICE £11,482.00 £12,253.00 £12,930.00 £13,990.00 £244.00 Trayslides for basket sorting stations KTS-K 1.1/TSF KTS-K 1.2/TSF KTS-K 1.3/TSF KTS-K 1.4/TSF Fixed Fixed Fixed Fixed trayslide trayslide trayslide trayslide for for for for 2 3 4 5 compartment compartment compartment compartment sorting sorting sorting sorting station station station station £662.00 £774.00 £865.00 £959.00 Ovehead sorting shelves KTS-K 1.1/OS KTS-K 1.2/OS KTS-K 1.3/OS KTS-K 1.4/OS Shelf Shelf Shelf Shelf with with with with storage storage storage storage over, over, over, over, length length length length 1130mm 1670mm 2210mm 2765mm £703.00 £888.00 £1,074.00 £1,262.00 In addition to the standard tabling solutions and mechanised handling appliances illustrated previously, we also manufacture a wide range of bespoke stainless steel tabling solutions and tray clearing systems that can be tailored to individual requirements. www.meiko-uk.co.uk Page 37 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.5 Tray clearing and conveying solutions Meiko manufacture a complete range of conveying systems to compliment both rack transport and flight conveyor ware washing machines that incorporate an extensive range of tray clearing solutions ranging from standard twin cord tray return conveyors, slat type accumulation conveyors and vertical lifting towers to specially constructed wall mounted carousel type tray return units especially suited to wash up operations where an ergonomic forward sorting operation is required. RF Twin cord tray transport PF Slat accumulation conveyor Request information on our front of house cladding and decor options by calling 01753 215120 MVF for vertical tray transport Tray conveyor with forward sorting station Prices on application www.meiko-uk.co.uk Page 38 Please contact our UK sales office on 01753 215120 for further information M-iQ For Meiko - Perfect is not enough - and with our state of the art M-IQ advanced technology series we have embraced a totally holistic approach to cleaning technology that will benefit the environment and its people for many years to come. In terms of sustainability, M-IQ delivers a host of revolutionary new features designed to minimise energy costs, water and chemical consumption and with optimum exhaust air management. Combine this with innovative cleaning solutions and the Meiko “Blue Vision” touch sensitive operator instruction panel that enables data exchange and storage for total hygiene management, control of running costs and analysis of the preset operating parameters of the machine to enable monitoring by the clients in-house technical services team or by a Meiko approved service agent. MiQ Basket transport machine M-IQ sustained problem solving Active individual tank wash water filtration system reduces cleaning issues – component parts needing to be manually removed and cleaned provided with a blue colour coding for instant recognition – self cleaning features for all parts of the machine. MiQ Basket transport machine with pedestal mounted forward sorting station www.meiko-uk.co.uk Page 39 Please contact our UK sales office on 01753 215120 for further information M-iQ M-IQ sustained environmental benefits Extremely low waste air emission values – noiseless wash pumps for operator working comfort – unique features and benefits that are totally operator friendly –reduced water, chemicals and energy consumption. M-IQ sustained durability The ability to update control software as features and technology develops – immediate identification of service issues via the TFT touch sensitive operating panel – guaranteed return on investment for the customer thanks to greatly reduced running cost MiQ Conveyor belt machine M-IQ sustainable innovation Reduction of operating costs per wash unit – improved washing results thanks to the M-iQ tank filtration technology – measured reduction in servicing and maintenance – operation and handling simplified and improved – considerable planning options offering machines with varying passing widths and passing heights to suit all applications MiQ Twin track conveyor belt machine with automatic cutlery & tray loading M-IQ sustained standards conformity Conformity to all national standards ensuring maximum safety for the machine operators – Proven and internationally accepted methods used to measure energy consumption levels. www.meiko-uk.co.uk Page 40 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.6 B-Tronic series flight type dishwashing machines A range of high capacity continuous belt conveyor dishwashing machines constructed throughout in type 304 (1.4301) stainless steel, and with capacities ranging from 1400 to 7200 plates per hour. All machines listed below are designed for electric heating, however steam heating or medium/high pressure hot water heating mediums are also available. Due to the number of options and permutations possible, only a basic machine selection has been shown, and you should contact our UK Sales office for specific requirements. Supplied with 6 x open racks plus 4 x cutlery containers. WRAS approval numbers & details can be found at the rear of the price list. ORDER CODE MANUFACTURERS MODEL REFERENCE LENGTH CSS DETERGENT SAVING MAXIMUM PLATES/HR LIST PRICE B190PCSS TOP B190P, CSS Top With waste air heat recovery unit and low energy heated drying zone 4600mm Detergent saving up to 80% up to 2400 £68,105.00 B230VAPCSS TOP B230VAP, CSS Top With waste air heat recovery unit and low energy heated drying zone 5900mm Detergent saving up to 80% up to 3500 £89,605.00 lEFT TO RIGHT MODElS IllUSTRATED www.meiko-uk.co.uk Page 41 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.6 B-Tronic series, standard machine accessories ORDER CODE MODEL REFERENCE AND DESCRIPTION BT-01 BT-02 BT-03 BT-10 BT-11 Feeding section options Standard 900mm feeding section increased to 1100mm Standard 900mm feeding section increased to 1400mm Standard 900mm feeding section increased to 2400mm CSS Top 1400mm feeding section increased to 1700mm CSS Top 1400mm feeding section increased to 2400mm BT-15 BT-16 BT-17 BT-18 Discharge section options Standard 1900mm discharge Standard 2300mm discharge Standard 2600mm discharge Standard 3000mm discharge B-TR1300 B-TR1500 Heated drying zone options Drying of B190 or B230 increased from 1100mm to 1300mm Drying of B190 or B230 increased from 1100mm to 1500mm £964.00 £1,578.00 B-AZ1100 /750 Outblowing zone options Combined AZ1100 and TRV750 heated dryer for models B190 or B230 £7,252.00 B-WP2 B-WP4 B-ABP BT-ABB Energy saving heat pump options WP2 heat pump for B190 or B230 model 7.5kw saving WP4 heat pump for B190 or B230 model 18.0kw saving Air-Box plus cooled air louvred distribution chamber WP2+4 Series Air-Box basic cooled air distribution chamber with top panel only, for WP2 and WP4 BT-20 Steam heating options low pressure (0.3 to 2.0bar) steam heating of B190 or B230 note: Alternative pressures possible at additional cost £5,046.00 BT-21 Cold water filling option for electric or steam machine £1,426.00 BT-19 GB Construction for dual dishes/containers washing BT-22 BT-23 BT-24 BT-25 Separations for restricted access Factory prepared separation between 2 main wash tanks Factory prepared separation between feeding and prewash Electrical control panel demounted and packed separately Heated drying zone demounted and packed separately note: price of re-assembly of machine on site will be included within our installation quotation. www.meiko-uk.co.uk section section section section Page 42 LIST PRICE increased increased increased increased to to to to 2300mm 2600mm 3000mm 3300mm £540.00 £1071.00 £5,816.00 £540.00 £8,356.00 £1,036.00 £1,036.00 £1,038.00 £1,036.00 £11,449.00 £23,077.00 £2,290.00 £651.00 £10,066.00 £383.00 £299.00 £272.00 £273.00 Please contact our UK sales office on 01753 215120 for further information SECTION 1.0 Warewashing appliances and accessories 1.6 B-Tronic series, standard machine accessories continued ORDER CODE BT-26 BT-27 BT-28 BT-29 MODEL REFERENCE AND DESCRIPTION LIST PRICE Side hinged doors Hinged side opening doors for standard 1300mm wash zone Hinged side opening doors for standard 900mm wash zone Hinged side opening doors for standard 600mm wash zone note: not available with thermo-label or thermal disinfection execution machines. £1,565.00 £1,496.00 £1,336.00 Thermo-label testing facility Tank heating increased to give an accumulated temperature of 71 degrees C on the product surface. Sanitization monitored by means of heat sensitive temperature tapes imbedded with a clear wax substance passing through the machine. £1,914.00 (electric) note: a useful management and HACCP documentation tool. B-WR1-CNS Heat recovery unit for Reverse Osmosis water WR1 heat recovery condensing unit provided with stainlesssteel pipework for operation with reverse osmosis final rinse water. Model number becomes WR1-CNS. BT-30 Manual switching for Reverse Osmosis rinsing Manual switch-over device incorporated on the electrical control panel of the machine to enable the final rinse to be selected between softened or reverse osmosis water. BT-31 Machine for top entry M&E services connections Machine prepared to accommodate mechanical and electrical services entry from above. Includes cladding of the machine to the rear with a 200mm x 100mm removable access panel. BT-32 Extension of top entry services cladding from top of machine to within the ceiling surface, and including removable panel for access to isolators and stop-cocks. note: price indicated is per 100mm BT-33 Additional emergency-off button mounted on feeding tunnel £274.00 BT-34 Additional emergency-off button mounted on discharge tunnel £274.00 BT-35 Conveyor belt options £3,923.00 £422.00 £1,594.00 per 100mm £116.00 per 100mm £15.00 per 100mm £15.00 Universal 54mm belt for hotels, restaurants, etc., provided with a series of laterally mounted support rollers to accommodate standard 500 x 500mm washing baskets BT-36 Hospital style 72mm belt provided with a series of laterally mounted support rollers to accommodate standard 500 BT-37 Options for top washing results £534.00 lateral washing arms fitted at both sides of the washing belt in addition to the standard upper and lower washing arms. note: only possible in main wash tanks, not prewash sections. Price indicated is per tank. BT-38 CC Log - daily operating log for download via infrared to hand held Palm. Equipment inlcudes licence for “Hygiene Management” with update function and software series MCommander W Note: Palm PDA Version M130 or newer to be used with 0S4.0 user software. £1,210.00 BT-39 CC Insight - operating log for connection to a PC via data cable, W-lAN or GSM. Standard equipment package includes KMM communication module with cable based interfaces RS232/422, SD Card with 1GB memory capacity, licence for “Hygiene Management” with update function and software series M-Commander W and radio antenna located on the top surface of the control cabinet. £5,996.00 BT-40 Manual frost protection device with electrically operated shutter controlled from machine £491.00 BT-41 Key switch as part of the main electrical control panel to allow the reverse running of the conveyor belt. £435.00 www.meiko-uk.co.uk Page 43 Please contact our UK sales office on 01753 215120 for further information Water treatment and chemicals www.meiko-uk.co.uk www.meiko-uk.net (Food Waste Handling Solutions) SECTION 2.0 Water treatment and chemicals 2.1 Water softening apparatus Meiko UK water softeners are based on the principle of ion exchange, i.e. water containing hardness salts passes through a resin in which calcium and magnesium ions are exchanged for sodium ions. Sodium salts do not produce the same problems due to precipitation and scale formation. Effective water softening helps to prolong the life of heating elements, and reduces scale build-up on final rinse nozzles, that in turn has a detrimental effect on the washing result. ORDER CODE MANUFACTURER MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE MHE-E18T Timer controlled fully automatic cold water softener with a capacity of 3100 litres of treated water between regeneration at an incoming water hardness of 300ppm. Peak flow of 50lt/minute. Maximum temperature of incoming water not to exceed 35 degrees C. Water feed pressure to be not less than 2.0bar and not greater than 4.0bar. Overall size 275 x 450 x 695mm high. £672.00 MHE-MCW18TT Twin tank high flow cold water softener with a continuous output of up to 800lt/hr on demand at a maximum water hardness of 75ppm. Provided with Fleck control valve and time clock controlled regeneration. The incoming water feed temperature not to be in excess of 35 degrees C, with the water feed pressure to be not less than 2.0bar and not greater than 4.0bar. Overall size 570 x 620 x 700mm high. £1,732.00 MHEHWE18T Timer controlled fully automatic warm water softener with a capacity of 3100 litres of treated water between regeneration at an incoming water hardness of 300ppm. Peak flow of 50lt/minute. Maximum temperature of incoming water not to exceed 60 degrees C. Water feed pressure to be not less than 2.0bar and not greater than 4.0bar. Overall size 275 x 450 x 695mm high. £1,145.00 www.meiko-uk.co.uk Page 44 Please contact our UK sales office on 01753 215120 for further information SECTION 2.0 Water treatment and chemicals 2.1 Water softening apparatus ORDER CODE MANUFACTURER MODEL REFERENCE STANDARD FEATURES Cylinder type stainless steel water softener with a 12 litre resin basin and designed for manual regeneration. Complete with 2 valves and flexible stainless steel braided hoses. Overall size 185mm diameter x 500mm high. AD50-12 LOADING LIST PRICE £114.00 Mobile dollys for 18lt cabinet type water softeners and booster pump sets MHE-WSD01 MHE-WSD02 MHE-733045 www.meiko-uk.co.uk Page 45 Stainless steel low profile dolly measuring 290mm x 465mm x 60mm high and having a 15mm upstand to three edges. Designed to accomodate 1 cabinet. £122.00 Stainless steel low profile dolly measuring 570mm x 465mm x 60mm high and having a 15mm upstand to three edges. Designed to accomodate 2 cabinets. £128.00 15mm mixing valve, fully WRC certified and conforming to the D.0.8 NHS specification. Made from cast gunmetal with stainless steel springs. Note: recommended for all hot softeners £210.00 Please contact our UK sales office on 01753 215120 for further information SECTION 2.0 Water treatment and chemicals 2.2 Reverse Osmosis water treatment units To guarantee first glass results on glassware, we recommend the introduction of Reverse Osmosis water on the final rinse. Although standard base exchange water softeners will remove the calcium carbonate from the raw water, with the majority of applications high mineral content residue will still leave marks or spotting on clean glassware. ORDER CODE MANUFACTURER MODEL REFERENCE MHESmarT-XL STANDARD FEATURES LOADING Compact reverse osmosis unit designed for a softened water feed temperature of 5-25 degrees C and water flow up to 200 lt/hour at between 2 and 4bar. • Overall size 325 x 1150 x 430mm high. • Output of up to 400lt/hour of permeate. • 96-98% of dissolved minerals removed. • Industrial quality membrane for extended performance and reliability. • conductivity display indicating the quality of the treated water. • Low water pressure sensor switch. • 230v/50hz/1phase – 13amp fused spur. • Smart XL pressure vessel • Installation kit 0.55kW LIST PRICE £9,521.00 2.3 Rinse pressure booster pumps Cabinet type booster pumps designed to increase the water feed pressure to the warewashing appliance or softener when the incoming water services are below the required minimum. The cabinet type unit is available as a single stack or twin stack version, designed to suite with the AT/HW series softeners decribed within section 2.1. ORDER CODE MANUFACTURER MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE MHE-RGFL6000 Loose supply Stuart Turner flow switch booster pump for minimum flow rate of 0.5 ltr/min. With horizontal and vertical Delivery ports, fully automatic control, dry run protection and low voltage switch. Designed for operation with an incoming feed not exceeding 600C. 13amp fused spur outlet required. £453.00 MHE-RGFL6000/IBP Single Stuart Turner booster pump as above, mounted in a matching cabinet to the water softeners. Overall size: 275 x 450 x 345mm high. 13amp fused spur outlet required. £685.00 www.meiko-uk.co.uk Page 46 Please contact our UK sales office on 01753 215120 for further information SECTION 2.0 Water treatments and chemicals 2.4 Detergent and rinse aid products Meiko professional glass and dishwashing chemicals have been formulated to guarantee the correct PH balance for varying water conditions. The carefully balanced formulas ensure a first class finish, free of residue that can taint the washed product. The Meiko professional range of detergents and rinse aids is also extremely environmentally friendly. ORDER CODE ILLUSTRATION MHE-METRO4/5 etro Glasswashing Gla G laasswashin sswashinngg Detergent Deterge D etergeent nt A non-caustic alkaline liquid developed for use in cabinet glasswashing machines. O Economical in use. O Suitable for use on aluminium. O Does not cause clouding or staining of drinking glasses which can be a problem with other alkali cleaners. O May be used in all water conditions. O Excellent at removing soils and lipstick from glasses. O Surfactants used are biodegradable and phosphate free. Safety Advice: Irritating to skin. Risk of serious damage to eyes. Avoid contact with skin and eyes, rinse with plenty of water and seek medical advice. Wear suitable gloves and eye/face protection. This material and its container must be disposed of as hazardous waste. 5L – 20L x IRRIT TANT RE-ORDER -ORDER R HOTLINE 01753 215151 MHE-MIRROR4/5 irror Glasswashing Gla asssw assw washin ashing ng R Rinse inse Aid A An economical rinse additive for glasswashing machines - to assist drying and to give sparkle to all catering ware. O Dilution rates depend on total hardness of mains water supply, but it is recommended that the product is used at a concentration of 0.01% to 0.05%. O Use in conjunction with automatic dispensing units. O Rinse water should be higher than 70oC. Safety Advice: LIST PRICE DESCRIPTION PACK SIZE Glasswashing detergent Non-caustic detergent formulated to clean all types of glassware without causing damage to the interior surface or effecting beer head retention. For best results, automatic dosing is recommended, with the temperature of the wash tank water at an optimum 60 degrees C. 4 x 5 litres £44.00 Glasswashing rinse aid Optimum rinse temperature of 70 degrees for best results, automatic dosing recommended. 4 x 5 litres £41.00 Dishwashing detergent A unique detergent that features a high degree of stain removal in addition to the sanitising of all washware. Optimum wash temperature of 60 degrees for best results, with automatic dosing recommended. 4 x 5 litres £54.00 Chlorinated dishwashing detergent A highly alkaline liquid detergent, specially formulated for use where tannin is a problem. 4 x 5 litres £59.00 Dishwashing rinse aid Optimum rinse temperature of 82 degrees for best results, automatic dosing recommended. 4 x 5 litres £41.00 5L – 20L Safety data sheet available for professional user on request. RE-ORDER -ORDER R HOTLINE 01753 215151 MHE-MELLO4/5 ello Dishwashing Dis shwaashing shw shing Deter D Detergent eeter erge gen ent nt Mello is a unique detergent, which features a high degree of stain removal as well as sanitising all washware. O Remove food scraps from dishes before stacking into dishwasher. O Note: This product is not recommended for use on aluminium. O Dilution rates depend on severity of soiling and water conditions, but it is recommended that the product is used at a concentration of 0.1% to 0.3%. O Use in conjunction with automatic dispensing units. O Wash water temperature of 60°C for optimum performance. O To enhance overall performance, use Rinse Aid in the final e rinse cycle. Safety Advice: Contains SODIUM HYDROXIDE Causes severe burns. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accident or if you feel unwell, seek medical advice (show label where possible). Avoid contact with skin and eyes. Wear suitable protective clothing, gloves and eye/face protection. After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of waterr. Keep out of reach of children. This material and its container must be disposed of as hazardous waste. 5L – 20L CORROSIVE RE-ORDER -ORDER R HOTLINE 01753 215151 MHEMIRACLE-4/5CHL iracle Chhlorinated Chlorinated C hlorinat ateedd Dishw D Dishwashing ishwaash ashing ing Detergent De etergen eter gent nt A highly alkaline liquid for washing of catering ware in dishwashing machines. Specifically formulated for use where tannin is a problem. O Economical in use. O May be used in all automatic machines dishwashers i.e. Single tank, conveyor & flight machines. O Effectively removes soils and stains from glasses, crockery and cutlery. O Contains chlorine releasing agent which effectively removes tannin from cups. O Inhibits the formation of scale in machine, ensuring perfect results every time. O Provides excellent wetting, cleaning and low foam properties. O For use in all water conditions – soft, medium and hard. O Surfactants used are biodegradable and phosphate free. Safety Advice: 5L – 20L May cause sensitisation by skin contact. Causes severe burns. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accident or if you feel unwell seek medical advice immediately (show label where possible). Wear suitable protective clothing, gloves and eye/face protection. Warning! Do not use together with other products. May release dangerous gases (chlorine). CORROSIVE RE-ORDER -ORDER R HOTLINE HO 01753 215151 MHEMAESTRO-4/5 aestro Dishwashing Dis shwaashing shw shing R Rinse inse Aidd Produces spotless, smear-free results and prevents foam build-up in the wash tank. O Dilution rates depend on total hardness of mains water supply, but it is recommended that the product is used at a concentration of 0.01% to 0.05%. O Use in conjunction with automatic dispensing units. O Rinse water should be higher than 70°C. Safety Advice: 5L – 20L Safety data sheet available for professional user on request. RE--ORDER HOTLINE RE-ORDER HO 01753 215151 215151 www.meiko-uk.co.uk Page 47 Please contact our UK sales office on 01753 215120 for further information SECTION 2.0 Water treatment and chemicals 2.4 Detergent and rinse aid products ORDER CODE ILLUSTRATION MHEGWSTART-4/5 etro irror Glasswashing Gla G laasswashin sswashinngg D etergeent nt Deterge Detergent Glasswashing Gla assswas assw ashin shing ng Rinse A Rinse Aid A non-caustic alkaline liquid developed for use in cabinet glasswashing machines. An economical rinse additive for glasswashing machines - to assist drying and to give sparkle to all catering ware. O Economical in use. O Does not cause clouding or staining of drinking glasses which can be a problem with other alkali cleaners. O Dilution rates depend on total hardness of mains water supply, but it is recommended that the product is used at a concentration of 0.01% to 0.05%. O May be used in all water conditions. O Use in conjunction with automatic dispensing units. O Excellent at removing soils and lipstick from glasses. O Rinse water should be higher than 70oC. O Suitable for use on aluminium. LIST PRICE DESCRIPTION PACK SIZE Mixed glasswashing starter pack comprising 3 x 5 litre packs of Metro detergent and 1 x 5 litre pack of Mirror rinse aid. 4 x 5 litres £43.00 Mixed dishwashing starter pack comprising 3 x 5 litre packs of Mello detergent and 1 x 5 litre pack of Maestro rinse aid. 4 x 5 litres £51.00 Pot and panwashing detergent Specially formulated liquid detergent with high soil removal properties. Wash water temperature of between 60 and 70 degree for best results. 1 x 20 litres £81.00 Pot and panwashing rinse aid Optimum rinse temperature of 82 degrees for best results. Low foaming formula. 1 x 20 litres £58.00 Glass renovating powder A non-caustic, alkaline detergent sanitiser which has been formulated to remove films and deposits from glasses. It is also suitable for use in cabinet and rotary brush machines as a general maintenance product. 1 x 5 Kg £34.00 O Surfactants used are biodegradable and phosphate free. Safety Advice: Safety Advice: 5L – 20L x Irritating to skin. Risk of serious damage to eyes. Avoid contact with skin and eyes, rinse with plenty of water and seek medical advice. Wear suitable gloves and eye/face protection. This material and its container must be disposed of as hazardous waste. 5L – 20L Safety data sheet available for professional user on request. IRRIT TANT RE-ORDER -ORDER R HO HOTLINE 01753 215151 MHEDWSTART-4/5 RE-ORDER -ORDER R HO HOTLINE 01753 215151 ello aestro Dishwashing Dis shwaashing shw ashing D Deter Detergent eeteergen gennt Dishwashing Dis shwas shw ashing shing Rinse inse Aidd Mello is a unique detergent, which features a high degree of stain removal as well as sanitising all washware. Produces spotless, smear-free results and prevents foam build-up in the wash tank. O Dilution rates depend on total hardness of mains water supply, but it is recommended that the product is used at a concentration of 0.01% to 0.05%. O Remove food scraps from dishes before stacking into dishwasher. O Use in conjunction with automatic dispensing units. O Note: This product is not recommended for use on aluminium. O Rinse water should be higher than 70°C. O Dilution rates depend on severity of soiling and water conditions, but it is recommended that the product is used at a concentration of 0.1% to 0.3%. O Use in conjunction with automatic dispensing units. O Wash water temperature of 60°C for optimum performance. O To eenhance overall performance, use Rinse Aid in the final rinse cycle. Safety Advice: Safety Advice: 5L – 20L Contains SODIUM HYDROXIDE Causes severe burns. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accident or if you feel unwell, seek medical advice (show label where possible). Avoid contact with skin and eyes. Wear suitable protective clothing, gloves and eye/face protection. After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of waterr. Keep out of reach of children. This material and its container must be disposed of as hazardous waste. CORROSIVE RE--ORDER HOTLINE 01753 215151 RE-ORDER RE-ORDER -ORDER R HOTLINE HO 01753 215151 MHE-MIRAGE1/20 5L – 20L Safety data sheet available for professional user on request. irage Poot PPot o aand nd PPan an Washing Was W ashing shing De e gent etergent eter Detergent A highly alkaline liquid for washing of large catering vessels in dishwashing machines. O Economical in use. O May be used in all automatic machines dishwashers i.e. Single tank, conveyor & flight machines. O Effectively removes soils and stains from pots and pans. O Note: This product is not recommended for use on aluminium. O Provides excellent wetting, cleaning and low foam properties. O For use in all water conditions – soft, medium and hard. O Surfactants used are biodegradable and phosphate free. Safety Advice: 5L – 20L Avoid contact with skin & eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing, gloves and eye/face protection. In case of accident or if you feel unwell seek medical advice immediately (show label where possible). This material and its container must be disposed of as hazardous waste. CORROSIVE RE-ORDER -ORDER R HOTLINE HO 01753 215151 MHEMETEOR-1/20 eteor Poot PPot o aand nd PPan an Washing Was W ashing shing R Rin inse nsee Aid Aid Rinse An economical rinse additive - to assist drying of all catering ware particularly larger vessels. O Dilution rates depend on total hardness of mains water supply, but it is recommended that the product is used at a concentration of 0.01% to 0.05%. O Use in conjunction with automatic dispensing units. O Rinse water should be higher than 70oC. Safety Advice: 5L – 20L Safety data sheet available for professional user on request. RE-ORDER -ORDER R HOTLINE HO 01753 215151 MHEMEGATON egaton Glass G Gla lass aass Reno Renovate Renovvate atte Powder Po Powd wde der e A non-caustic, alkaline detergent sanitizer, which has been formulated to remove films and deposits from drinking glasses. The removal of residue chemicals improves the beer head retention and lacing of beers. It is also suitable for use in cabinet and rotary brush machines as a general maintenance product. O Economical in use. O Sanitizes glasses and benefits machine interior. O Suitable for use on aluminium. O Does not cause clouding or staining of glasses. O Improves beer head retention and lacing of beers. O Excellent at removing soils and lipstick from glasses. O Surfactants used are biodegradable. Safety Advice: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Avoid contact with skin & eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. This material and its container must be disposed of as hazardous waste. Warning! Do not use together with other products. May release dangerous gases (chlorine). 5Kg - 10Kg x IRRIT TANT TANT RE-ORDER -ORDER R HOTLINE HO 01753 215151 www.meiko-uk.co.uk Page 48 Please contact our UK sales office on 01753 215120 for further information SECTION 2.0 Water treatment and chemicals 2.4 Detergent and rinse aid products ORDER CODE ILLUSTRATION MHEMITRE itre Cutlery Cu utle tlerry Renovating Re Reno enoova vating ating Liquid Liq quid A pH neutral detergent formulated for soaking, cleaning and sanitising cutlery. O O O O Excellent grease removal properties. Cleans and sanitises in one. For general soaking, cleaning and sanitising use at a dilution of 1:80. LIST PRICE DESCRIPTION PACK SIZE Cutlery renovating liquid A pH neutral detergent formulated for soaking, cleaning and sanitising cutlery with excellent grease removal properties. 4 x 5 litres £62.00 Trolley washing detergent A non-caustic alkaline detergent, specially developed for cleaning catering trolleys. 1 x 20 litres £44.00 Trolley washing rinse aid An economical rinse additive to be used in conjunction with airline trolley washing detergent. Final rinse temperature should be greater than 70oC. 1 x 20 litres £41.00 Descaling powder 3kg tub of descaling powder used for removal of limescale deposit caused by hard water. 1 x 3 Kg £44.00 Effective in both soft and hard water conditions. O Economical in use. O All surfactants used are biodegradable and phosphate free. Safety Advice: 5L – 20L Safety data sheet available for professional user on request. RE-ORDER -ORDER R HOTLINE 01753 215151 MHEMARBLE arble Airrline Airline Air line TTrolle Trolley rolley Washing Washing De eteergent eter gent Detergent A non-caustic alkaline liquid developed for cleaning catering trolleys. O Economical in use. O Suitable for use on aluminium. O May be used in all water conditions. O Surfactants used are biodegradable and phosphate free. Safety Advice: Irritating to skin. Risk of serious damage to eyes. Avoid contact with skin and eyes, rinse with plenty of water and seek medical advice. Wear suitable gloves and eye/face protection. This material and its container must be disposed of as hazardous waste. 5L – 20L x IRRIT TANT RE-ORDER -ORDER R HOTLINE 01753 215151 MHEMOSAIC osaic Trolley Washing Airrline Airline Air line TTrolle rolley Washing Rinse Rinse nse Aid id An economical rinse additive to be used in conjunction with Airline TTrrolley Washing Detergent. O Dilution rates depend on total hardness of mains water supply, but it is recommended that the product is used at a concentration of 0.01% to 0.05%. O Use in conjunction with automatic dispensing units. O Rinse water should be higher than 70oC. Safety Advice: 5L – 20L Safety data sheet available for professional user on request. RE-ORDER -ORDER R HOTLINE 01753 215151 MHEMAXIM axim Descaling D De escaaling Po escaling Powder oowder wder Sulphamic acid powder descaler for removal of limescale and protein / stone deposits from machine dishwashers, water coolers, coffee machines and air conditioning filters. Features include: O O Eliminates calcium and magnesium hard water mineral deposits. Contains corrosion inhibitors. O Removes scale and staining from vitreous ceramic surfaces. O Attacks lime and scale build up in dishwashing machines, coffee machines, water coolers and milkstones on other surfaces. O Economical in use. O Surfactants used are biodegradable and phosphate free. Safety Advice: Irritating to eyes & skin. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Avoid contact with skin & eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. This material and its container must be disposed of as hazardous waste. 3Kg x IRRIT TANT RE-ORDER -ORDER R HOTLINE 01753 215151 MHE-DL30 www.meiko-uk.co.uk Detergent and rinse aid dosing unit Automatic detergent and rinse aid dosing unit with conductivity probe for rack transport or for Flight type dishwashers. note: this unit provided on free of charge basis on detergent supply contracts with a minimum annual invoice value of £500.00. Page 49 £270.00 Please contact our UK sales office on 01753 215120 for further information Kitchen food waste handling appliances and bag compactors www.meiko-uk.co.uk www.meiko-uk.net (Food Waste Handling Solutions) SECTION 3.0 Kitchen food waste handling appliances 3.1 450 Series A range of three units to effectively and hygienically handle food waste in smaller commercial kitchens. The grinding assembly is made from a special cast steel alloy. The UK and MC models are supplied with a class 'A' air gap kit ORDER CODE MANUFACTURER MODEL REFERENCE STANDARD FEATURES LOADING LIST PRICE 450ATF.1 Single phase only model, nominal capacity of 100/150 kg/hr. No welding required to install into existing sink with a 90mm dia. drain. Supplied with a start & stop control unit and motor protector, jam release wrench and a feeder/cutlery trap. 0.55kW £1,528.00 450MC.1 Single phase only model, nominal capacity 100/150 kg/hr, freestanding. Supplied with a start & stop control unit with motor protector, solenoid valve with coil, line strainer, back flow preventer and jam release wrench. 0.55kW £3,045.00 Dimensions: 500 x 500 x 863-991mm high www.meiko-uk.co.uk Page 50 Please contact our UK sales office on 01753 215120 for further information SECTION 3.0 Kitchen food waste handling appliances 3.2 UK Series - Bench mounted food waste disposers When installed within a dish table or work bench, the hopper of the UK series disposer unit enables continuous feeding of food waste into the grinding mechanism. During operation, the safety cover prevents operator access to the rotating cutting blades of the grinding unit during operation. Mounted on the underside of the stopping surface of the inlet is the cutlery saving magnet. Both the hopper and grinding motor housing are provided in the highest grade type 304 (1.4301) stainless steel for durability and ease of cleaning. LOADING/ELECTRICAL SUPPLY/FUSE DISPOSAL CAPACITIES 515UK.1 1.1kW/1 Phase/10 Amp 400kg/hour 1000 £4,139.00 515UK.3 1.1kW 3/Phase/10 Amp 400kg/hour 1000 £4,139.00 520UK.3 1.5kW/3 Phase only/10 Amp 500kg/hour 1250 £4,757.00 530UK.3 2.2kW/3 Phase only/16 Amp 700kg/hour 1500 £5,384.00 550UK.3 4.0kW/3 Phase only/16 Amp 850kg/hour 2000 £5,898.00 ORDER CODE MANUFACTURER MODEL REFERENCE MAX MEALS PER DAY LIST PRICE 3.3 MC series - freestanding food waste disposers The MC series cabinet type freestanding models feature a sloping cover with a cutlery saver magnet mounted on the underside, and fitted with an interlocked safety switch that prevents access to the rotating cutting blades of the grinding unit during operation. The unit is delivered ready for connection to the building electrical and mechanical services, with the waste outlet being adjustable at time of installation to suit the position of the on-site waste connection. LOADING/ELECTRICAL SUPPLY/FUSE DISPOSAL CAPACITIES 515MC.1 1.1kW/1 Phase/10 Amp 400kg/hour 1000 £4,396.00 515MC.3 1.1kW 3/Phase/10 Amp 400kg/hour 1000 £4,396.00 520MC.3 1.5kW/3 Phase only/10 Amp 500kg/hour 1250 £5,035.00 530MC.3 2.2kW/3 Phase only/16 Amp 700kg/hour 1500 £5,700.00 550MC.3 4.0kW/3 Phase only/16 Amp 850kg/hour 2000 £6,240.00 ORDER CODE MANUFACTURER MODEL REFERENCE MAX MEALS PER DAY LIST PRICE Accessories included: START-STOP UNIT LINE STRAINER www.meiko-uk.co.uk Page 51 CLASS ‘A’ AIR GAP SOLENOID VALVE WITH COIL JAM RELEASE WRENCH CUTLERY SAVING MAGNET Please contact our UK sales office on 01753 215120 for further information SECTION 3.0 Kitchen food waste handling appliances 3.4 AZP80 wet waste dewatering unit Freestanding and compact food waste treatment unit with an overall floor footprint of 1500mm long x 700mm wide. Discharge chute can be positioned either to the left or right of the machine, or to the front of the unit if space restraints apply. Constructed throughout in type 304 (1.4301) high grade stainless steel with exterior surfaces clad in 18/9 stainless steel panelling. ORDER CODE ILLUSTRATION DESCRIPTION LOADING LIST PRICE AZP80-01 AZP80 • • • • 7.55kW (3 phase) £54,034.00 • • • • Powerful 5.5kW grinding motor. up to 85% reduction of original volume. incorporated warm water cleaning cycle. Hinged access door to screw and sieve for ease of cleaning. Tungsten carbide cutting teeth inset into the wall of the waste receiving tank. perforated collection tray located at tank base collects cutlery or small flatware items not removed by the operators. Tank bulk access and screw press door both interlocked for operator safety. Double insulated wing doors to controls. ORDER CODE FLUSHING TROUGH OPTION AZP80-02 Liquid disinfectant dosing pump incorporated within the cabinet of machine www.meiko-uk.co.uk Page 52 LIST PRICE £2,535.00 Please contact our UK sales office on 01753 215120 for further information SECTION 3.0 Bag Compactors and accessories 3.5 Tony Team Bag Compactors Tony Team bag compactors are designed and built to meet the most stringent safety, hygiene and environmental standards. They can deliver cost reductions of up to 70%, are simple and safe to use and reduce bulk by 75%. Electro-hydraulically powered, manufactured from food quality stainless steel. ORDER CODE MANUFACTURER MODEL REFERENCE TT-100 TT-160 TT-180 www.meiko-uk.co.uk Page 53 STANDARD FEATURES LOADING LIST PRICE Compaction cycle time: 40 secs Compaction Pressure: 2,500 kg Compacted package size: 400mm x 400mm x 300mm Average weight of compacted package: 14 kg Safety features: Failsafe door switch. Adjustable full load warning. Package size controls. Reusable bin to contain compacted waste. Dims: 500mm x 500mm x 870mm high Weight of machine: 150kg 0.37kW 240v 50Hz 1 Phase £7,555.00 Compaction cycle time: 10 secs Compaction Pressure: 3,100 kg Compacted package size: 400mm x 400mm x 300mm Average weight of compacted package: 16 kg Safety features: Failsafe door switch. Adjustable full load warning. Package size controls. Reusable bin to contain compacted waste. Dims: 530mm x 500mm x 1530mm high Weight of machine: 200kg 0.75kW 240v 50Hz 1 Phase £7,645.00 Compaction cycle time: 22 secs Compaction Pressure: 4,500 kg Compacted package size: 475mm x 500mm x 475mm Average weight of compacted package: 22 kg Safety features: Failsafe door switch. Adjustable full load warning. Package size controls. Reusable bin to contain compacted waste. Dims: 625mm x 570mm x 1790mm high Weight of machine: 250kg 0.75kW 240v 50Hz 1 Phase £8,271.00 Please contact our UK sales office on 01753 215120 for further information SECTION 3.0 Bag Compactors and accessories 3.5 Tony Team Bag Compactors Tony Team bag compactors are designed and built to meet the most stringent safety, hygiene and environmental standards. They can deliver cost reductions of up to 70%, are simple and safe to use and reduce bulk by 75%. Electro-hydraulically powered, manufactured from food quality stainless steel. ORDER CODE LIST PRICE DESCRIPTION TT-100 BIN Additional compactor bin for TT-100 £114.00 TT-160 BIN Additional compactor bin for TT-160 £114.00 TT-180 BIN Additional compactor bin for TT-180 £147.00 TT-100 TT-100 starter pack with 100 bin bags, 100 ties and a sack tie tool £180.00 TT-160 STARTER TT-160 starter pack with 100 bin bags, 100 ties and a sack tie tool £180.00 TT-180 STARTER TT-180 starter pack with 100 bin bags, 100 ties and a sack tie tool £222.00 STARTER www.meiko-uk.co.uk Page 54 Please contact our UK sales office on 01753 215120 for further information www.meiko-uk.co.uk www.meiko-uk.net (Food Waste Handling Solutions) Sinks, taps, pre-rinse units, hose reels enzyme dosing units and fly killers. SECTION 4.0 Sinks, taps, pre-rinse units, hose reels, enzyme dosing units and fly killers 4.0 Meiko standard sink units To compliment our range of warewashing and mechanical handling solutions, Meiko UK are able to offer a comprehensive range of high quality sink units and accessories for use within our dishwashing projects. Manufactured throughout in type 304 stainless steel and supported on a frame and leg sections manufactured from 30mm square section 18g, type 304 stainless steel tube. 50mm upstand to rear and anti drip edge to front and both sides. Bowl size: 610 x 457 x 302mm deep. Fitted with 18g type 304 stainless steel fixed undershelf. ORDER CODE DESCRIPTION AND ILLUSTRATIONS DIMENSIONS LIST PRICE MHE-SBLHSD1200 Single bowl, left hand drainer sink unit with two leg sections 1200 x 700 x 850mm £1,063.00 MHE-SBRHSD1200 Single bowl, right hand drainer sink unit with two leg sections 1200 x 700 x 850mm £1,063.00 MHE-SBLHSD1500 Single bowl, left hand drainer sink unit with two leg sections 1500 x 700 x 850mm £1,139.00 MHE-SBRHSD1500 Single bowl, right hand drainer sink unit with two leg sections 1500 x 700 x 850mm £1,139.00 MHE-DBLHSD1800 Double bowl, single left hand drainer sink unit with two leg sections 1800 x 700 x 850mm £1,629.00 MHE-DBRHSD1800 Double bowl, single right hand drainer sink unit with two leg sections 1800 x 700 x 850mm £1,629.00 www.meiko-uk.co.uk Page 55 Please contact our UK sales office on 01753 215120 for further information SECTION 4.0 Sinks, taps, pre-rinse units, hose reels, enzyme dosing units and fly killers 4.0 Meiko standard sink units ORDER CODE DESCRIPTION AND ILLUSTRATIONS DIMENSIONS LIST PRICE MHE-DBDD2100 Double bowl, double drainer sink unit with two leg sections 2100 x 700 x 850mm 1,659.00 MHE-DBDD2400 Double bowl, double drainer sink unit with two leg sections 2400 x 700 x 850mm £1,722,00 MHE-DBDD2700 Double bowl, double drainer sink unit with three leg sections 2700 x 700 x 850mm £1,881.00 MHE-DBDD3000 Double bowl, double drainer sink unit with three leg sections 3000 x 700 x 850mm £2,035.00 MHE-WS4 Wall mounted wash hand basin, panelled to front and both sides and provided with 3 inch lever taps, waste with overflow and plug with chain. Basin size of 270mm x 130mm x 135mm deep. Overall size of 330mm x 330mm x 170mm high. £195.00 MHE-WS3/KVS Wall mounted wash hand basin with KVS push-front’ panel for knee operation. With pre-mixer valve and spout faucet, water hose and tap hole stopper. Panels to both sides. Overall size of 330 x 330 x 170mm high. Bowl size of 270mm diameter. £282.00 MHE-BSX JTS 700 Free standing bucket sink with wash hand basin, panelled to front and to both sides and with a swing away bucket resting grid. Provided with swivel mixer tap, waste with overflow, and plug with chain. Internal basin dimensions of 370 x 340 x 150mm high. Overall size of 500 x 700 x 850mm high. £1,088.00 MHE-733045 15mm mixing valve, fully WRC certified and conforming to the D.0.8 NHS specification. Made from cast gunmetal with stainless steel springs. Note: recommended for all handwash sinks £210.00 www.meiko-uk.co.uk Page 56 Please contact our UK sales office on 01753 215120 for further information SECTION 4.0 Sinks, taps, pre-rinse units, hose reels, enzyme dosing units and fly killers 4.1 Meiko taps, and hose reels ORDER CODE ILLUSTRATION DESCRIPTION LIST PRICE MHE-500SL3 Pair of lever handle 1/2” hot and cold high neck pillar taps with 75mm lever handles and with hard wearing chrome plate finish. £68.00 MHE-500ML3 Dual flow 1/2” hot and cold high swivelling mixer tap with 75mm lever handles and with hard wearing chrome plate finish. £112.00 MHE-AJPR/BF2 Pedestal type hot and cold pre-rinse shower spray unit with add-on basin filling tap and wall support bracket. The unit is designed to operate at a hot water temperature of up to 60 degrees C. Hose manufactured from WRAS approved polyurethane, with spray valve head having a brass interior. £368.00 MHE-MERK 15 HDG Retractable hose reel with a hose length of 15m and provided with an adjustable hose bumper, multi-fit bracket for wall – ceiling – or under table mounting, and trigger type spray gun. Polypropylene outer casing for durability and ease of cleaning. £882.00 MHE-MSRK 15 HDG Retractable hose reel with a hose length of 15m and provided with a multi-fit bracket for wall, ceiling or under table mounting and trigger type spray gun. Open stainless steel casing for durability and ease of cleaning. £1998.00 www.meiko-uk.co.uk Page 57 Please contact our UK sales office on 01753 215120 for further information SECTION 4.0 Sinks, taps, pre-rinse units, hose reels, enzyme dosing units and fly killers 4.2 Enzyme dosing units and fly killers ORDER CODE SYSTEM COMPONENTS MHE-GPMECH/E STANDARD FEATURES SERVICES Enzyme dosing unit, electrically operated and provided with 6 x 5lt containers of enzyme fluid. It is recommended that enzyme fluid is pumped automatically into the drain that is to be used for liquid discharge from the food waste tank. Overall size: 510 x 155 x 620mm high Electrics 240V/50hZ 1 Phase 13 amp LIST PRICE £790.00 MHE-GPMECH/B As above, battery operated £790.00 MHE-GP-3X5 Additonal 3 x 5lt pack of enzyme dosing fluid £205.00 MHE-CZPEPAT40 Electric grid type insect killer, with stainless steel casing & grid. Designed for wall mounting or ceiling suspension. Range of action: 100 Sq M. Fitted with 2 x 20 watt lamps. Dimensions: 260(H) x 330(W) x 110(D). Electrics 240V/50hZ 1 Phase 13 amp £232.00 MHE-CZPEPAT60 Electric grid type insect killer, with stainless steel casing & grid. Designed for wall mounting or ceiling suspension. Range of action: 200 Sq M. Fitted with 3 x 20 watt lamps. Dimensions: 260(H) x 470(W) x 110(D). Electrics 240V/50hZ 1 Phase 13 amp £355.00 www.meiko-uk.co.uk Page 58 Please contact our UK sales office on 01753 215120 for further information Mobile handling and dish clearing appliances www.meiko-uk.co.uk www.meiko-uk.net (Food Waste Handling Solutions) SECTION 5.0 Mobile handling and cleaning products 5.1 Mobile transport trolleys To complement our range of warewashing and mechanical handling solutions, Meiko UK have recently introduced a comprehensive range of high quality stainless steel mobile transport, storage, and hygiene products for use within our dishwashing projects. ORDER CODE ILLUSTRATION DESCRIPTION LIST PRICE MHE- TAW/10 Single compartment self clear trolley with a capacity of 10 trays. Universal tray slide design to suit most trays and fitted with side panels and back stops. Front loading only. Fitted with four 125mm castors (two braked) with bumpers. Max loading: 10kg per level. Tray slide spacing: 140mm Dimensions: 510 x 640 x 1700mm high £734.00 MHE- TAW/12 Single compartment self clear trolley with a capacity of 12 trays. Universal tray slide design to suit most trays and fitted with side panels and back stops. Front loading only. Fitted with four 125mm castors (two braked) with bumpers. Max loading: 10kg per level. Tray slide spacing: 115mm Dimensions: 510 x 640 x 1700mm high £773.00 MHE- TAW/20 Double compartment self clear trolley with a capacity of 20 trays. Universal tray slide design to suit most trays and fitted with side panels and back stops. Front loading only. Fitted with four 125mm castors (two braked) with bumpers. Max loading: 10kg per level. Tray slide spacing: 140mm Dimensions: 930 x 640 x 1700mm high £980.00 MHE- TAW/24 Double compartment self clear trolley with a capacity of 24 trays. Universal tray slide design to suit most trays and fitted with side panels and back stops. Front loading only. Fitted with four 125mm castors (two braked) with bumpers. Max loading: 10kg per level. Tray slide spacing: 115mm Dimensions: 930 x 640 x 1700mm high £1,057.00 MHE- TAW/30 Three compartment self clear trolley with a capacity of 30 trays. Universal tray slide design to suit most trays and fitted with side panels and back stops. Front loading only. Fitted with four 125mm castors (two braked) with bumpers. Max loading: 10kg per level. Tray slide spacing: 140mm Dimensions: 1335 x 640 x 1700mm high £1,301.00 MHE- TAW/36 Three compartment self clear trolley with a capacity of 36 trays. Universal tray slide design to suit most trays and fitted with side panels and back stops. Front loading only. Fitted with four 125mm castors (two braked) with bumpers. Max loading: 10kg per level. Tray slide spacing: 115mm Dimensions: 1335 x 640 x 1700mm high £1,353.00 www.meiko-uk.co.uk Page 59 Please contact our UK sales office on 01753 215120 for further information SECTION 5.0 Mobile handling and cleaning products 5.1 ORDER CODE Mobile transport trolleys ILLUSTRATION DESCRIPTION LIST PRICE Single sided plate transport/storage trolley with inclined base shelf. Available in two heights – high level for easy access to plates and low level for maximum plate storage capacity. Fitted with non-marking castors, 2 braked. MHE -TETW1/26H High level dims: 995x485x951mm Capacity (260mm dia. plates) = 135 £698.00 MHE -TETW1/26N Low level dims: 995x485x766mm Capacity (260mm dia. plates) = 135 £452.00 MHE -TETW1-6/26 Low level dims: 995x721x766mm Capacity (260mm dia. plates) = 270 £569.00 Double sided plate transport/storage trolley with inclined base shelf. Available in two heights – high level for easy access to plates and low level for maximum plate storage capacity. Fitted with non-marking castors, 2 braked. MHE - TETW2/26H High level dims: 995x795x951mm Capacity (260mm dia. plates) = 270 £956.00 MHE - TETW2/26N Low level dims: 995x795x766mm Capacity (260mm dia. plates) = 270 £816.00 MHE-TETW0163485 Plate transport trolley divider, without front stop (not for TETW-1-6/26N) £32.00 MHE-TETW0163486 Plate transport trolley divider, with front stop (not for TETW-1-6/26N) £53.00 MHE-TETW0191246081 Plate transport trolley dust cover For all TETW models £86.00 Dishwash basket trolley, high level with L-shaped runners with safety edge, all welded construction. Fitted with rubber disc bumpers and non-marking castors, 2 braked. MHE-KTW-1/10 10 basket capacity, one compartment dims: 643x635x1750mm MHE-KTW-2/20 20 basket capacity dims, two compartment Dims: 1181x635x1750mm www.meiko-uk.co.uk Page 60 £944.00 £1,509.00 Please contact our UK sales office on 01753 215120 for further information SECTION 5.0 Mobile handling and cleaning products 5.1 Mobile transport trolleys ORDER CODE ILLUSTRATION DESCRIPTION LIST PRICE Dishwash basket trolley, low level with L-shaped runners with safety edge, all welded construction. Stainless steel worktop and safety rail/push handle. Fitted with rubber disc bumpers and non-marking castors, 2 braked. MHE -KTW-1/5 5 basket capacity, one compartment dims: 643x635x1060mm £772.00 MHE -KTW-2/10 10 basket capacity, two compartment dims: 1181x635x1060mm £913.00 Dishwash basket trolley with anti- drip base shelf. All welded stainless steel construction with polycarbonate fixed bumpers and push handle. Non marking castors, 2 braked. Dims: 710x580x1027mm MHE - KR/ 50-50 £511.00 MHE - KR/ 50-50E Dishwash basket trolley, basic model without push handle or anti-drip base shelf. Fitted with non-marking castors, 2 braked. Dims: 535x535x192mm MHE-OTA/47-36 Open platform tray dispenser with 480x380mm platform. Uses tension spring system for uniform serving height. Fitted with impact resistant polycarbonate push handles and buffers. Non marking castors, 2 braked. Dims: 510x800x900mm £1,367.00 MHE-OTA/53-37 As above, with 540x380mm platform. £1,229.00 MHE-OTA/ U-BW Open platform tray dispenser with adjustable platform (325-550x320-566mm). Uses tension spring system for uniform serving height. Fitted with impact resistant polycarbonate push handles and buffers. Non marking castors, 2 braked. Dims: 510x820x1030mm £1,902.00 Ambient enclosed basket dispenser for 500x500mm baskets. Uses tension spring system for uniform serving height. Fitted with impact resistant polycarbonate push handles and buffers. Non marking castors, 2 braked. Dims: 760x712x900mm. MHE-KO/50/50 £178.00 £1,393.00 MHEKO/50/50K As above, with ventilated body. Dims: 760x712x900mm £1,555.00 MHEKOUH/50/50K As above, with heated enclosed body. Dims: 760x853x900mm £2,139.00 www.meiko-uk.co.uk Page 61 Please contact our UK sales office on 01753 215120 for further information SECTION 5.0 Mobile handling and cleaning products 5.1 Mobile transport trolleys To complement our range of warewashing and mechanical handling solutions, we have a comprehensive range of high quality stainless steel mobile transport, storage, and hygiene products for use within our dishwashing projects. ORDER CODE ILLUSTRATION DESCRIPTION LIST PRICE MHE-TEH-1/ V19-26 Heated single stack plate dispenser with variable temperature control. Uses tension spring system for uniform serving height. hitted with impact resistant polycarbonate push handles and buffers. Non marking castors, 2 braked. For plate sizes (dia) 190 to 260mm. Dims: 460x610x900mm £1,183.00 MHE-TEH-1/ V27-33 As above, for plate sizes 270 to 330mm. Dims: 530x710x900mm £1,312.00 MHE-TEH-2/ V19-26 Heated double stack plate dispenser with variable temperature control. Uses tension spring system for uniform serving height. hitted with impact resistant polycarbonate push handles and buffers. Non marking castors, 2 braked. For plate sizes (dia) 190 to 260mm. Dims: 460x935x900mm £1,497.00 MHE-TEH-2/ V27-33 As above, for plate sizes 270 to 330mm. Dims: 530x1055x900mm £1,574.00 MHE-TE-1/ V19-26 Ambient double stack plate dispenser. Uses tension spring system for uniform serving height. Fitted with impact resistant polycarbonate push handles and buffers. Non marking castors, 2 braked. For plate sizes (dia) 190 to 260mm. Dims: 460x935x900mm £1,035.00 MHE-TE-1/ V27-33 As above, for plate sizes 270 to 330mm. Dims: 530x1055x900mm £1,071.00 MHE-TE-1/ VK19-26 Ambient, ventilated double stack plate dispenser. Uses tension spring system for uniform serving height. Fitted with impact resistant polycarbonate push handles and buffers. Non marking castors, 2 braked. For plate sizes (dia) 190 to 260mm. Dims: 460x935x900mm £1,219.00 www.meiko-uk.co.uk Page 62 Please contact our UK sales office on 01753 215120 for further information SECTION 5.0 Mobile handling and cleaning products 5.1 ORDER CODE Mobile transport trolleys ILLUSTRATION DESCRIPTION LIST PRICE MHE - 0162201 Plate cover for 190 to 260mm stack £49.00 MHE - 0162201 Plate cover for 270 to 330mm stack £66.00 MHE - UST /57-28 Ambient universal dispenser to accommodate special shape/size crockery with easily adjusted locating rods. Uses tension spring system for uniform serving height. Fitted with impact resistant polycarbonate push handles and buffers. Non marking castors, 2 braked. Dims: 510x750x900mm £1,698.00 MHE - UST /57-28K Ambient, ventilated universal dispenser to Accommodate special shape/size crockery with easily adjusted locating rods. Uses tension spring system for uniform serving height. Fitted with impact resistant polycarbonate push handles and buffers. Non marking castors, 2 braked. Dims: 510x750x900mm £1,977.00 MHE - USTH /57-28 Heated universal dispenser to accommodate special shape/size crockery with easily adjusted locating rods and variable temperature control. Uses tension spring system for uniform serving height. Fitted with impact resistant polycarbonate push handles and buffers. Non marking castors, 2 braked. Dims: 510x750x900mm £2,292.00 General purpose heavy duty trolley with 60kg load bearing capacity per shelf. Reinforced frame with dished anti drip shelves. Welded construction with rubber disc bumpers and non-marking castors. 2 braked. Dims: 895x595x1023mm high. Shelf dims: 800x500mm. MHE-SW8x5/2 Two tier model £477.00 MHE-SW8x5/3 Tree tier model £599.00 www.meiko-uk.co.uk Page 63 Please contact our UK sales office on 01753 215120 for further information SECTION 5.0 Mobile handling and cleaning products 5.1 Mobile transport trolleys ORDER CODE ILLUSTRATION DESCRIPTION Round bin in H.D. Polymer with a capacity of 76 litres. Moulded handles to aid lifting and reinforced rim. Temperature range 290C to +600C. Dimensions: 560mm dia, 700mm high. Metal dolly: 470mm dia, 170mm high. MHE-MB76L MHE-10/CST Mobile cutlery landing and sort table with LIST PRICE £129.00 £1,172.00 Polypropylene work surface and with 2 tier sloping shelf over complete with 10 units of GN 1/3 polycarbonate containers for the storage of clean cutlery. Bank of 4 angled runners below for standard 500 x 500mm washing baskets, with undershelf to the remainder. Overall size of 930 x 700 x 1740mm high. Pack of 10 polycarbonate cutlery MHE-10/CSTGN1/3 www.meiko-uk.co.uk £108.00 containers for cutlery sorting table Page 64 Please contact our UK sales office on 01753 215120 for further information SECTION 5.0 Mobile handling and cleaning products 5.2 Meiko mobile soak tanks and liquid draining tables ORDER CODE ILLUSTRATION DESCRIPTION LIST PRICE MHE-GT/1 Mobile cup or glass liquid draining table to accommodate 1 standard 500 x 500mm washing basket. Provided with 2 lift-off perforated draining panels and a manual drain valve for liquid emptying Overall size of 600 x 600 x 870mm high. £753.00 MHE-GT/2 Mobile cup or glass liquid draining table to accommodate 2 standard 500 x 500mm washing baskets. Provided with 3 lift-off perforated draining panels and a manual drain valve for liquid emptying. Overall size of 1120 x 600 x 870mm high. £874.00 MHE-A/181 Mobile unheated cutlery soak tank with 60lt water capacity to accommodate a standard 500 x 500mm washing basket. Provided with manual drain valve. Overall size of 570 x 570 x 550mm high. £750.00 MHE-A/181CC Mobile unheated cutlery soak tank with 60 lt water capacity to accommodate a standard 500 x 500mm washing basket. Fitted with a cutlery chute and provided with manual drain valve. Overall Size of 600 x 600 x 750mm high. £977.00 MHE-A/191 Mobile unheated cutlery soak tank with 90lt water capacity, recommended when a magnetic cutlery lifting device is being used. Provided with manual drain valve. Overall size of 820 x 570 x 850mm high. £977.00 MHE-COSHH.1 Single section, freestanding COSHH cupboard. With insulated, hinged door with inset handle. Key lockable (recessed cylinder lock). Internal height adjustable shelf. Dimensions: 650 x 650 x 850mm high. MHE-COSHH.2 www.meiko-uk.co.uk Double section, freestanding COSHH cupboard with insulated, hinged doors with inset handles. Key lockable (recessed cylinder locks). Internal height adjustable shelf. Dimensions: 650 x 1000 x 850mm high. Page 65 £1,074.00 £1,536.00 Please contact our UK sales office on 01753 215120 for further information SECTION 5.0 Mobile handling and cleaning products 5.3 Meiko stainless steel freestanding shelf units To complement our range of warewashing and mechanical handling solutions, Meiko UK have a comprehensive range of high quality stainless steel mobile transport, storage, and hygiene products for use within our dishwashing projects. DESCRIPTION AND ILLUSTRATION ORDER CODE Stainless steel grade 304 four tier solid shelving units with one piece H.D. polymer corners and chrome plated corner poles. Supplied with plastic tapered assembly collars. Standard height: 1800mm, adjustable to max: 2000mm. Weight loads: 600mm to 1200mm lengths = 300kg per shelf. 1500mm x 1800mm lengths = 275kg per shelf. Mobile unit: 300kg per bay. MHE-RG50/060 MHE-RG50/090 MHE-RG50/120 MHE-RG50/150 MHE-RG50/180 600 900 1200 1500 1800 x x x x x 500mm 500mm 500mm 500mm 500mm £485.00 £554.00 £662.00 £735.00 £773.00 MHE-RG60/060 MHE-RG60/090 MHE-RG60/120 MHE-RG60/150 MHE-RG60/180 600 900 1200 1500 1800 x x x x x 600mm 600mm 600mm 600mm 600mm £498.00 £583.00 £732.00 £784.00 £824.00 600 x 500mm £485.00 Stainless steel grade 304 four tier perforated shelving units with one piece H.D. polymer corners and chrome plated corner poles. Supplied with plastic tapered assembly collars. Standard height: 1800mm, adjustable to max: 2000mm. Weight loads: 600mm to 1200mm lengths = 300kg per shelf. 1500mm x 1800mm lengths = 275kg per shelf. Mobile unit: 300kg per bay. Option: stainless steel castors, 125mm dia, 2 braked www.meiko-uk.co.uk Page 66 MHE-RGR50/060 DIMENSIONS LIST PRICE MHE-RGR50/090 900 x 500mm £554.00 MHE-RGR50/120 1200 x 500mm £662.00 MHE-RGR50/150 1500 x 500mm £735.00 MHE-RGR50/180 1800 x 500mm £773.00 MHE-RGR60/060 600 x 600mm £498.00 MHE-RGR60/090 900 x 600mm £583.00 MHE-RGR60/120 1200 x 600mm £732.00 MHE-RGR60/150 1500 x 600mm £784.00 MHE-RGR60/180 1800 x 600mm £824.00 £99.00 Please contact our UK sales office on 01753 215120 for further information SECTION 5.0 Mobile handling and cleaning products 5.4 Meiko polymer freestanding shelf units and trolleys To complement our range of warewashing and mechanical handling solutions, Meiko UK have a comprehensive range of high quality polymer mobile transport, storage, and hygiene products for use within our dishwashing projects. DESCRIPTION AND ILLUSTRATION ORDE CODE Four tier shelving units with detergent resistant louvered mat inserts and stainless steel posts. Polymer mats are easily removable for dishwasher cleaning and end mats are contoured and radiused to fit snugly around the posts. MHE-POLY-30/60 MHE-POLY-30/80 MHE-POLY-30/90 MHE-POLY-30/100 MHE-POLY-30/120 MHE-POLY-30/150 MHE-POLY-30/180 600 800 900 1000 1200 1500 1800 x x x x x x x 300mm 300mm 300mm 300mm 300mm 300mm 300mm £219.00 £233.00 £258.00 £284.00 £309.00 £336.00 £361.00 MHE-POLY-40/60 MHE-POLY-40/80 MHE-POLY-40/90 MHE-POLY-40/100 MHE-POLY-40/120 MHE-POLY-40/150 MHE-POLY-40/180 600 800 900 1000 1200 1500 1800 x x x x x x x 400mm 400mm 400mm 400mm 400mm 400mm 400mm £233.00 £258.00 £284.00 £297.00 £322.00 £452.00 £570.00 MHE-POLY-50/60 MHE-POLY-50/80 MHE-POLY-50/90 MHE-POLY-50/100 MHE-POLY-50/120 MHE-POLY-50/150 MHE-POLY-50/180 600 800 900 1000 1200 1500 1800 x x x x x x x 500mm 500mm 500mm 500mm 500mm 500mm 500mm £245.00 £271.00 £297.00 £322.00 £348.00 £400.00 £439.00 MHE-POLY-60/60 MHE-POLY-60/80 MHE-POLY-60/90 MHE-POLY-60/100 MHE-POLY-60/120 MHE-POLY-60/150 MHE-POLY-60/180 600 800 900 1000 1200 1500 1800 x x x x x x x 600mm 600mm 600mm 600mm 600mm 600mm 600mm £258.00 £284.00 £309.00 £348.00 £374.00 £530.00 £673.00 All units: 1800mm high Weight loads: 600mm to 1200mm lengths = 300kg per shelf 1500mm & 1800mm lengths = 275kg per shelf Mobile unit = 300kg per bay. DIMENSIONS LIST PRICE ORDER CODE Polymer poker chip dish cart with adjustable towers. Supplied with four dividers, centre column and protective cover. Mounted on 127mm dia. swivel castors (two with brakes). Overall dimensions: 676 x 676 x 787mm high. MHE-PCD11A www.meiko-uk.co.uk Page 67 £1276.00 Please contact our UK sales office on 01753 215120 for further information Meiko WRAS approval details & numbers WRAS Approval Number: 0910322 Free standing food waste disposal units with a stainless steel hopper and integral cutting ring and stainless steel spout. The flow is controlled by a solenoid valve (ASCO). Maximum working pressure 4 bar. Note The unit is supplied with a spout which must be installed to comply with an AUK3 air gap. Size: ½" BSP (M). Model: Disperator 500 Series Waste Disposal. Marking: Label on body showing Disperator Excellent. Data label on body showing manufactures name address and technical information. Note: Manufacturer: Factor: Meiko (UK) Ltd WRAS Approval Number: 1003336 Range of under counter glass washing machines having a solenoid valve (Invensys) fitted to the cold water inlet which supplies water to the heater within the machine. The appliance has a commercial salt regenerated water softener built in. Maximum supply pressure 5.0 bar. Size: ¾” BSP (F) inlet Model: Meiko ECO530 F-M EW10 Glasswasher Marking: Front panel badged MEIKO, ECOSTAR 530F GW. Data label on front panel bottom right-hand side corner showing Manufacturers Meiko, manufacturers address, Type, Serial number, DVGW, Voltage, KW rating of boiler, Boiler contents and year of manufacture Note: This appliance has a Fluid Category 3 backflow prevention device built in. Manufacturer: Meiko Maschinebau GmbH & Co KG Factor: Meiko (UK) Ltd WRAS Approval Number: 1007051 `Topic` range of bed pan washing machines. Flow is controlled via a solenoid valve (A&K Muller) and discharges via a type `AA` airgap arrangement, which incorporates an aerator at the outlet (Neoperl). The appliances also incorporate a strainer at the inlet (A&K Muller). Maximum working pressure 6.0 bar. Size: ¾” BSP male inlets. Model: Meiko topic 10.2, 20.2 & 40.2. Marking: Topic, Meiko, Meiko logo printed on control panel.Meiko, Meiko logo, model number, and product information printed on adhesive label on front panel and inside door. Note: These appliances incorporate a Fluid category 5 backflow prevention device. Manufacturer: Meiko Maschinebau GMBH Factor: Meiko (UK) Ltd www.meiko-uk.co.uk WRAS Approval Number: 1111099 `Meiko TopLine` range of bedpan washing machines. Flow is controlled by two normally closed solenoid valves incorporating a dirt trap arrangement with stainless steel strainers, and plastic flow regulators and discharges via a type `AA` air gap. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C. Size: ¾” BSP male inlets. Model: Meiko TopLine 10 (Wall mounted). Meiko TopLine 20 (Floor standing). Meiko TopLine 30 (Wall installation). Meiko TopLine 40 (Cabinet installation). Marking: Meiko, TopLine on control panel.Meiko, model number, company details product information on servicing hatch. Note: These appliances incorporate a Fluid Category 5 backflow prevention device. Manufacturer: Meiko Maschinebau GmbH & Co KG Factor: Meiko (UK) Ltd WRAS Approval Number: 1207338 Bed pan washing and disinfection machine. Flow is controlled via a solenoid valve and discharges via a type `AA` airgap arrangement. Maximum working pressure 5.0 bar & maximum supply temperature 60ºC. Size: ¾ BSP (M) inlet connections Model: MEIKO TOPIC 10 MEIKO TOPIC 20 MEIKO TOPIC 40 MEIKO TOPIC 40 E10 = wall mounting model20 = floor mounted model40 = cabinet model40E = small cabinet model Marking: Front casing badged MEIKO TOPIC. Data label at the base of front casing stating MEIKO TOPIC and serial number. Data label inside of top door stating manufacturers name, Type and serial number. Manufacturer: Meiko Maschinebau GmbH & Co KG Factor: Meiko (UK) Ltd WRAS Approval Number: 0812089 `K-Tronic` and `B-Tronic` range of commercial dishwashing machines with two separate water supplies one feeding the final rinse via a strainer (AUK Muller) and solenoid valve (AUK Muller) and discharges through a type `AA` air gap arrangement through a float valve (AUK Muller). The other supply to the sump is via a strainer (AUK Muller), solenoid valve (AUK Muller) and discharges via an `AA` air gap arrangement providing fluid category 5 protection. Maximum working pressure 2.5 bar. Size: ¾" BSP inlet. Model: B & K Tronic range.K200 V/KV/VA/P/I/VP/VAP/CSSTop.K400 V/KV/VA/P/I/VP/VAP/CSSTop.Eco K200KA15B190 V/P/CSSTopB230 V/VA/VAP/CSSTop B350 V/VA/VAP/CSSTopB460 VA/VAP/CSSTop B580 VA/VAP/CSSTopB690 V/VA/VAP/CSSTop B810 VA/VAP/CSSTopBA VAT, BA VAP, BA VAS, BA HAT, BA HAS, BA G, BA B, BA C, BTA 160, BTA 240, BA133. Marking: Model number and technical data printed on adhesive label on body. Meiko and Clean Controls printed on control panel. Meiko embossed into body. Manufacturer: Meiko (UK) Ltd Factor: Meiko (UK) Ltd Please contact our UK sales office on 01753 215120 for further information Meiko WRAS approval details & numbers continued WRAS Approval Number: 1003337 Range of under counter dish washing machines having a solenoid valve (Invenseys) fitted to the cold water inlet which supplies water to the heater within the machine. The appliance has a commercial salt regenerated water softener built in. Maximum supply pressure 5.0 bar. Size: ¾” BSP (F) inlet. Model: Meiko ECO530 F-M EW10 Dishwasher. Marking: Front panel badged MEIKO, ECOSTAR 530F DW. Data label on front panel bottom right-hand side corner showing Manufacturers Meiko, manufacturers address, Type, Serial number, DVGW, Voltage, KW rating of boiler, Boiler contents and year of manufacture. Note: This appliance has a Fluid Category 3 backflow prevention device built in. Manufacturer: Factor: Meiko (UK) Ltd WRAS Approval Number: 1007341 Under counter dishwashing machine having a solenoid valve (Invensys) and fill hose (Codeflex) connected to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure and temperature 5 bar and 82°C. Size: ¾" BSP (M) inlet connection Model: FV & ECO range of commercial dishwashing machinesECO430, ECO530 & FV28 Gio, FV40.2 Gio, FV70.2, FV40.2M and FV60.2 Marking: Casing badged Meiko and model number. Data label on front casing showing manufacturers name and address, model number and serial number and other technical information. Note: This appliance has a fluid category 5 backflow prevention device built in. Manufacturer: Meiko Maschinebau GmbH & Co KG Factor: Meiko (UK) Ltd WRAS Approval Number: 1003338 Range of hood type dish washing machines having a solenoid valve (Invenseys) fitted to the cold water inlet which supplies water to the heater within the machine. The appliance has a commercial salt regenerated water softener built in and incorporates a double check valve. Maximum supply pressure 5 bar. Size: ¾” BSP (F) inlet. Model: Meiko ECO545D F-M EW10 Dishwasher Marking: Front panel badged MEIKO, ECOSTAR 545 D. Data label on front panel bottom right-hand side corner showing Manufacturers Meiko, manufacturers address, Type, Serial number, DVGW, Voltage, KW rating of boiler, Boiler contents and year of manufacture. Note: This appliance has a Fluid Category 3 backflow prevention device built in, for commercial premises FC4 protection must be installed upstream and for healthcare premises FC5 protection must be installed upstream of this appliance. Manufacturer: Meiko Maschinebau GmbH & Co Kg Factor: Meiko (UK) Ltd WRAS Approval Number: 1007342 Range of hood style dishwashing machine having a solenoid valve (Invensys) and fill hose (Codeflex) connected to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure and temperature 5 bar and 82°C. Size: ¾" BSP (M) inlet connection Model: DV, FV & ECO Range of commercial Hood dishwashersECO545D F-M, DV80.2, DV120.2, DV160.2, DV240.2, DV270.2, DV125.2, DV240B, DV270B, DV200.2, DV200.2PW, FV130.2 and FV250.2 Marking: Casing badged Meiko and model number. Data label on front casing showing manufacturers name and address, model number and serial number and other technical information. Note: This appliance has a fluid category 5 backflow prevention device built in. Manufacturer: Meiko Maschinebau GmbH & Co KG Factor: Meiko (UK) Ltd WRAS Approval Number: 1007340 Range of hood style dishwashing machine having a solenoid valve (Invensys) and fill hose (Codeflex) connected to a Type `AB` air gap assembly which supplies water to the heater within the machine. The machines incorporate commercial water softener after the air gap. Maximum supply pressure and temperature 5 bar and 82°C. Size: ¾" BSP (M) inlet connection Model: FV40.2 Active Under counter dishwashersFV60.2 Active Under counter DishwasherDV80.2 Active Hood DishwasherDV120.2 Active Hood DishwasherDV125.2 Active Hood Dishwasher Marking: Casing badged Meiko and model number. Data label on front casing showing manufacturers name and address, model number and serial number and other technical information. Note: This appliance has a fluid category 5 backflow prevention device built in. Manufacturer: Meiko Maschinebau GmbH & Co KG Factor: Meiko (UK) Ltd www.meiko-uk.co.uk WRAS Approval Number: 1206341 Range of pass through commercial dishwashing machines with two built in Type AA air gaps. Optional double check valve and water meter available. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C Size: ¾ BSP (F) Inlet connection Model: Meiko M-IQ Series: 1.M-IQ B-xxx, 2. M-IQ K-xxx & 3.MIQ KA-xxx. Key: 1 - 3 Describes the main type of machine, B Conveyor type transport dishwasher machines, K - Rack type dishwashing machines & KA - Container dishwashing machine. The further product code (xxx) describes the machine sizes: M Number of washing zones (M = 2), 7 - Passage widths 750 mm, 4 - Passage heights 465 mm, GB - Special option - dishes and containers, V8 - Prewash zone length 800 mm, N33 - Dwell zones 2x300mm & P8 Pumped final rinse Zone 600mm. Marking: Casing moulded Meiko. Data label on side of machine casing showing Manufacturer name and address, Type, serial number and other technical information Note: These appliances incorporate Fluid Category 5 backflow protection. Manufacturer: Meiko Maschinebau GmbH & Co KG Factor: Meiko (UK) Ltd Please contact our UK sales office on 01753 215120 for further information Summarised terms of sale Prices Are quoted in British Pound (£) Sterling and are effective from the 1st January 2013. Prices indicated presume that delivery can be accepted within three (3) months of order receipt by Meiko UK Limited. Deliveries after this date will be subject to prices ruling at date of goods dispatch. VAT Prices offered are net of Value Added Tax (VAT) which will be added at the rate applicable at the date of despatch. Delivery Carriage is paid on all UK orders with net invoice value of £500.00, including Northern Ireland, the Western Isles, the Northern Isles and the Isle of Wight. Orders below £500.00 net will be subject to delivery charges. Deliveries are made on tailgate lift vehicles to customer premises. It is the responsibility of the customer to move from delivery transport to storage or to installation location. Meiko UK operate a delivery routing system based on the UK postcodes. For deliveries outwith this schedule, or for special timed deliveries please contact our logistics department for further information. Orders Warranty Installation Are accepted and dispatched in accordance with our standard published terms and conditions of sale, a copy of which is available upon request. All appliances carry our standard twelve (12) months parts and labour warranty against manufacturing or component defect, however exclusions do apply and a copy of these are available upon request. Off-loading, moving into position, assembly, final connections, or commissioning are not allowed for within the prices indicated within this price list and will be subject to additional charges. Meiko UK Limited Baden House, 393 Edinburgh Avenue, Slough, Berkshire. SL1 4UF T: 00 44 1753 215120 F: 00 44 1753 215159 E: [email protected] Please contact our UK sales office on 01753 215120 for further information www.meiko-uk.co.uk www.meiko-uk.net (Food Waste Handling Solutions) Meiko UK Limited Baden House 393 Edinburgh Avenue, Slough, Berkshire. SL1 4UF Tel. 00 44 1753 215120 Fax. 00 44 1753 215159 E-mail: [email protected]