1. Intraocular Lenses and AC stabilisation

1
3
1
Intraocular Lens
& AC StabilisAtion
2
1
Intraocular Lens
& AC StabilisAtion
Rayner IOLs
Aspheric, Toric, Multifocal, Multifocal Toric & Sulcoflex Intraocular Lenses
In 1948, Mr Harold Ridley, consultant ophthalmologist at St Thomas’ Hospital and
Moorfields Hospital, London, together with John Pike of the Rayner Company met
privately to discuss a new project. Ridley called this project the ‘artificial lenticulus
project’ and asked Pike for Rayner’s help in the design and manufacture of an
implantable lens.
Perspex was chosen as the preferred material for its good optical properties and
because it had been shown to be inert within body tissues. On the 29th of November
1949 at St Thomas’ Hospital, Ridley performed the first IOL operation on the eye of a
45-year-old female patient. The operation was done in two stages with the artificial lens
permanently implanted three months later.
With the help of prominent ophthalmic surgeons from around the world, Rayner has
continued to innovate and manufacture new IOL designs. New materials, lens packaging
and delivery injector systems offer improved ease of use, reduced need for manipulation
and better post-operative results.
Today, Rayner lenses are used globally, including some of the poorest countries on earth.
Rayner remains inspired by Ridley’s original decision, taken with John Pike, to make the
IOL widely available to all of humanity.
1910
1951
In 1910, J B Reiner and C D Keeler founded
the Rayner Company in London, England,
manufacturing spectacles.
1949
Harold Ridley, together with John Pike
of Rayner and John Holt of ICI,
designed the first IOL.
1966
1952 - 1958
Ridley presented his first paper on IOLs
at the Oxford Congress in England on
9 July. The reaction from his professional
colleagues was hostile.
Rayner began work with Strampelli, Epstein,
Joaquin Barraquer, and Dannheim on their
designs of posterior and anterior chamber lenses.
First refractive IOL for high myopia introduced.
1956
Rayner introduced the Choyce MkI,
Peter Choyce’s modification of Strampelli’s
anterior chamber lens design.
1979
The pioneering surgeons formed the
Intraocular Implant Club (IIC)
with Ridley and Pike.
1962
Work began with Binkhorst on his four-loop iris
fixation design. Fyodorov’s modification and
Binkhorst’s two-loop design followed
Choyce MkVIII and MkVIX
anterior chamber designs
became the first lenses to be
approved by FDA.
1975
The first, modern, posterior chamber lens
design was developed with John L. Pearce.
An agreement with Coburn allowed USA
to manufacture lenses.
1986 - 1999
Rayner moves to new
custom built laboratory in
Hove, East Sussex.
All Rayner products receive
CE mark authorisation
1
Intraocular Lens
& AC StabilisAtion
3
Rayner has been at the forefront of advances in IOL design that have involved the
application of wavefront technology to improve optical efficiency and visual function.
The ability to measure Higher Order Aberrations has led to a better understanding of
the eye as an optical system and the development of a new category of IOLs – aspherics
– which are capable of providing an excellent quality of vision.
Rayner IOLs are manufactured with AVH Technology for centration and stability and the
Amon-Apple enhanced square edge for reduced PCO.
C-flex Advance Aspheric
RAYNER C-flex Advance Preloaded
®
Mini Incision Preloaded IOL Injection System
®
Aspheric Preloaded IOL System
The C-flex Advance Aspheric (ADV970) is Rayner’s first preloaded IOL delivery system.
C-flex Advance Aspheric offers the monofocal cataract surgeon the reassurance of a
minimal touch delivery system, via a mini incision, and combines the benefits and
superior, clinically proven patient outcomes of the aberration neutral C-flex Aspheric IOL.
The C-flex Advance Aspheric provides simple and controlled IOL delivery by a singlehanded technique. The IOL can be delivered through a 2.2mm clear corneal wound mini
incision or a 2.4mm clear corneal incision direct into the capsular bag.
C-flex Advance
rayner C-flex 970C Aspheric
Single-piece hydrophilic acrylic intraocular lens
The Rayner C-flex range of hydrophilic acrylic injectable IOLs feature increased depth of
field compared with designs corrected for corneal spherical aberration, such as negative
aberration designs. Increased contrast sensitivity and increased functional visual acuity.
Key Features:
• Increased depth of field compared
with other designs
• Patented AVH Technology®
for perfect centration and stability
• Unique Amon-Apple Enhanced
Square Edge for reduced PCO
Model
Specification
Material
Optics diameter
Overall length
Power range
Estimated A-constant
IOL Master Constant
• Manufactured from Rayacryl® hydrophilic
acrylic co-polymer for:
- High biocompatibility
- Low PCO
- Optical purity – no vacuoles or glistenings
- Low Silicone Oil adherence
- Superb handling characteristics.
C-flex 970C
Aspheric
Rayacryl™ hydrophilic acrylic co-polymer
5.75mm
12.0mm
+22.5D to +29.5D (in 0.5D increments)
+30.0D to +34.0D (in 1.0D increments)
118.0
118.5
C-flex 970C
rayner Superflex 920H Aspheric
Single-piece hydrophilic acrylic intraocular lens
The Rayner Superflex range combines all the features of the C-flex platform with a larger
optic and a lower range of powers.
Model
Specification
Material
Optics diameter
Overall length
Power range
Estimated A-constant
IOL Master Constant
Super-flex 920H
Aspheric
Rayacryl™ hydrophilic acrylic co-polymer
6.25mm
12.5mm
-10.0D to +22.0D (in 0.5D increments)
118.0
118.5
Superflex 920H
4
2
1
Intraocular Lens
& AC StabilisAtion
rayner T-flex 573T/623T Toric Aspheric
Single-piece hydrophilic acrylic intraocular lens
Rayner T-flex® Toric IOLs (573T and 623T) are a superior alternative to toric IOLs
with a restricted range of torus and offer a precise, superior alternative to incisional
keratotomy and Limbal Relaxing Incisions (LRIs) for the treatment of pre-existing corneal
astigmatism.
Key Features:
• Exceptional rotational stability
Accurate, predictable and sustainable
visual outcome with superior
astigmatic correction
• Patented AVH Technology®
for perfect centration, anterior /
posterior and torsional stability
• Unique Amon-Apple Enhanced
Square Edge for reduced PCO
T-flex 573T/623T
Model
Specification
Material
Optics diameter
Overall length
Power range
• Good range of spherical and cylindrical
correction available.
• Manufactured from Rayacryl® hydrophilic
acrylic co-polymer for:
- High biocompatibility
- Low PCO
- Optical purity – no vacuoles or glistenings
- Low Silicone Oil adherence
- Superb handling characteristics.
T-flex 573T
T-flex 623T
Toric
Rayacryl™ hydrophilic acrylic co-polymer
5.75mm
6.25mm
12.0mm
12.5mm
Spheres: +6.0D to +30.0D in 0.5D increments
Cylinders: +1.0D to +6.0D in 0.5D increments
Alternative Toric powers also available within the range:
Spheres: -10.0D to +35.0D maximum (sphere + cylinder) in
0.5D increments
Cylinders: +1.0D to +11.0D in 0.5D increments.
118.0
118.5
Estimated A-constant
IOL Master Constant
http://www.rayner.com/raytrace
Online Premium IOL Calculator
For the Rayner T-flex® Toric, M-flex® T Multifocal Toric and Sulcoflex® Toric IOLs
Rayner’s new Raytrace® system offers surgeons an online IOL power calculator which is quick and easy to use,
providing clear and accurate power recommendations for Rayner’s complete range of premium lenses.
Quick and easy power calculations
• Open access with no login required
• Clear and intuitive user interface
• Biometry; including SIA and incision
location
Clear and accurate results
• IOL power recommendations with
estimated
• post-operative outcomes
• Print options including Theatre View
Complete all-in-one calculator
Access all of Rayner’s Premium IOLS
• T-flex® Aspheric Toric
• M-flex® Multifocal & M-flex® T
Multifocal Toric
• Sulcoflex® Pseudophakic
Supplementary IOLs
Join the Raytrace® Club and register
for a Raytrace login to access even
more functions.
Contact DFV for Username and password
1
Intraocular Lens
& AC StabilisAtion
5
rayner M-flex 580F/630F Multifocal
Single-piece hydrophilic acrylic intraocular lens
Rayner M-flex® Multifocal IOLs are based on a multi-zoned refractive aspheric optic
technology, with either 4 or 5 annular zones (depending on IOL base power). M-flex
provide a degree of pseudoaccommodation, lessening the need for additional correction
by spectacles or contact lenses.
Key Features:
• Reduced incidence of halo and glare
• Manufactured from Rayacryl® hydrophilic
acrylic co-polymer for:
• Superior contrast sensitivity
- High biocompatibility
• The only multifocal IOL with
- Low PCO
the benefits of patented AVH
Optical purity – no vacuoles or glistenings
®
Technology for perfect centration,
Low Silicone Oil adherence
anterior/posterior and torsional stability
- Superb handling characteristics.
• Unique Amon-Apple Enhanced
Square Edge for reduced PCO
Model
Specification
Material
Optics diameter
Overall length
Power range
M-flex 580F
M-flex 630F
Multifocal
Rayacryl™ hydrophilic acrylic co-polymer
5.75mm
6.25mm
12.0mm
12.5mm
(+4D Far dominant)
(+3D Far dominant)
+25.5D to +30.0D in 0.5D
+14.0D to +25.0D in 1.0D
increments
increments
+18.5D to +23.5D in 0.5D
increments
(+4D Far dominant)
+10.0D to + 25.0D in 0.5D
increments
118.0
118.5
Estimated A-constant
IOL Master Constant
M-flex 580F/630F
rayner M-flexT 588F/638F Multifocal Toric
Single-piece hydrophilic acrylic intraocular lens
With Rayner M-flex® T Multifocal Toric IOLs, the combination of multifocal and toric optical
components allows the potential benefit of reduced spectacle dependence to
be extended to patients with significant corneal astigmatism.
Key Features:
• Exceptional rotational stability
• Unique Amon-Apple Enhanced Square Edge
• Reduced incidence of halo and glare
• Superior contrast sensitivity
• Good range of spherical and cylindrical
correction available.
• Patented AVH Technology®
• Manufactured from Rayacryl®
Model
Specification
Material
Optics diameter
Overall length
Power range:
Standard
Premium
Estimated A-constant
IOL Master Constant
M-flexT 588F
M-flexT 638F
Multifocal Toric
Rayacryl™ hydrophilic acrylic co-polymer
5.75mm
6.25mm
12.0mm
12.5mm
Spherical equivalent: +14.0D to +32.0D in 0.5D increments
Cylinder: 2.0D
Addition: +3.0D & +4.0D
Spherical equivalent: +14.0D to +32.0D in 0.5D increments
Cylinder: 1.0D to 1.5D and 2.5D to 6.0D in 0.5D increments
Addition: +3.0D or +4.0D
118.0
118.5
M-flexT 588F/638F
6
2
1
Intraocular Lens
& AC StabilisAtion
rayner Sulcoflex 653L Aspheric
Single-piece hydrophilic acrylic pseudophakic supplementary IOL
Rayner Sulcoflex® Pseudophakic Supplementary IOLs are designed to correct post-surgical
or residual ametropia, without the trauma or increased surgical risk of an IOL exchange.
Key Features:
• Unique design reduces potential for
contact between implants
• Large optic diameter reduces risk of
optic-iris capture
• Round optic edge contributes to low
rates of dysphotopsia
• large diameter “undulating” haptics
for IOL centration & rotational stability
Sulcoflex 653L
Model
Specification
Material
Optics diameter
Overall length
Haptic angulation
Optic configuration
Power range
Standard range
Premium range*
(* Manufactured specifically to order)
• Manufactured from Rayacryl® hydrophilic
acrylic co-polymer for:
- High biocompatibility
- Low PCO
- Optical purity – no vacuoles or glistenings
- Low Silicone Oil adherence
- Superb handling characteristics.
Sulcoflex 635L
Pseudophakic Supplementary IOL
Rayacryl™ hydrophilic acrylic co-polymer
6.5mm
14mm
10º
Anterior Convex, Posterior Concave
-5.0D to +5.0D in 0.5D increments
-10.0D to -5.5D in 0.5D increments*
+5.5D to +10.0D in 0.5D increments*
rayner Sulcoflex 653F Multifocal
Single-piece hydrophilic acrylic pseudophakic supplementary IOL
Sulcoflex 653F
Model
Specification
Material
Optics diameter
Overall length
Haptic angulation
Optic configuration
Near Addition
Power range
Standard range
Premium range
Sulcoflex 635F
Pseudophakic Supplementary IOL
Rayacryl™ hydrophilic acrylic co-polymer
6.5mm
14mm
10º
Anterior Convex, Posterior Concave
+3.5D
-3.0D to +3.0D in 0.5D increments with +3.5D add.
-7.0D to -3.5D and +3.5D to +7.0D in 0.5D increments
1
Intraocular Lens
& AC StabilisAtion
7
rayner Sulcoflex 653T Toric
Single-piece hydrophilic acrylic pseudophakic supplementary IOL
Model
Sulcoflex 635T
Specification
Pseudophakic Supplementary IOL
Material
Rayacryl™ hydrophilic acrylic co-polymer
Optics diameter
6.5mm
Overall length
14mm
Haptic angulation
10º
Optic configuration
Anterior Convex, Posterior Concave
Power range: Standard Spherical Equivalent: –3.0 D +3.0 D in 0.5 D increments,
Cylinder +1.0 D, +2.0 D, +3.0 D
Premium Spherical Equivalent: –7.0 D to +7.0 D in 0.5 D increments,
( Made to order) Cylinder: +1.0 D to +6.0 D in 0.5 D increments.
Sulcoflex 653T
rayner Sulcoflex 653Z Multifocal Toric
Single-piece hydrophilic acrylic pseudophakic supplementary IOL
Model
Sulcoflex 635Z
Specification
Pseudophakic Supplementary IOL
Material
Rayacryl™ hydrophilic acrylic co-polymer
Optics diameter
6.5mm
Overall length
14mm
Haptic angulation
10º
Optic configuration
Anterior Convex, Posterior Concave
Near Addition
+3.5D
Power range: Standard Spherical Equivalent: –3.0 D +3.0 D in 0.5 D increments,
Cylinder +1.0 D, +2.0 D, +3.0 D
Premium Spherical Equivalent: –7.0 D to +7.0 D in 0.5 D increments,
( Made to order) Cylinder: +1.0 D to +6.0 D in 0.5 D increments.
Sulcoflex 653Z
8
2
Intraocular Lens
& AC StabilisAtion
1
HOYA IOLs
Pre-Loaded Aspheric, Toric, Multifocal Intraocular Lenses
For more than 65 years, Hoya corporation has been deeply committed to the
development of superior precision optics. HOYA provide ophthalmologists with
advanced products and services to help deliver optimal visual results to patients.
“For I dipped into the future,
far as the human eye could see,
The HOYA Group leverages optics research from diverse industries, encompassing
expertise in electro-optics, photonics, vision care, healthcare and aerospace:
• Over 60 consolidated subsidiaries
• 4 affiliated companies
• 28 countries and regions
• More than US$5Billion in annual revenue
saw a vision of the world,
and the wonder that would be.”
– Alfred Lord Tennyson
HOYA Founded - Japan’s
first specialty optical
glass manufacturer
HOYA Lens Australia
established
Development of yellow
-tinted IOL begins
One-piece yellow-tinted
PMMA IOL launched
1972
1975
1988
1994
1941
1967
1974
1987
Progressive multifocal
spectacle lens launched
Intraocular (IOL) and
Production of Mask
aspherical moulded
blank substrates for
IC semiconductor chips.
glass lens debut
Introduction of online
eyeglass lens ordering system.
Lens Australia
tablished
Manufactur
intraocular le
200
1991
2000
Three piece yellow-tinted
PMMA IOL unveiled
HOYA expands lens
processing operations
in U.S.A.
Development of yellow
-tinted IOL begins
One-piece yellow-tinted
PMMA IOL launched
Manufacturing of soft
intraocular lens begins
iSert launches in
Australia & New Zealand
1988
1994
2001
2007
1975
ps.
e
ystem.
Soft contact lenses
introduced
One-piece acrylic IOL
launched in the U.S.
afterFDA approval
2009
1987
1991
2000
2003
2008
Intraocular (IOL) and
aspherical moulded
glass lens debut
Three piece yellow-tinted
PMMA IOL unveiled
HOYA expands lens
processing operations
in U.S.A.
One-piece acrylic IOL
launched in Europe
after receiving CE mark
HOYA and Pentax
merge
1
Intraocular Lens
& AC StabilisAtion
9
HOYA Vivinex iSert Model XY1
-piece aspheric lens with new hydrophobic acrylic material Vivinex™
1
The Vivinex iSert Model XY1 is a single piece IOL with an optic manufactured from the
new hydrophobic material Vivinex™
It has an aspheric profile and is tinted yellow to inhibit UV retinal damage. Vivinex iSert
Model XY1 can be implanted into the eye through a small 2.0mm incision.
Key Features:
• New Hydrophobic Acrylic material
• Outstanding performance
• Improved Square Edge helps to prevent PCO
• For long-lasting ophthalmic
surgical outcomes
Model
Specification
Optic & Haptic Material
Optics diameter
Overall length
Power range
IOL Master Constant
Recommended Incision Size
Incision Size
• Textured-rough Haptic for better grip
onto capsular surface
• Optic Edge Texturing Finish to reduce
Dysphotopsia
Vivinex iSert Model XY1
VivinexTM iSert® XY1
Aspheric ABC Design with sharp textured optic edge
Hydrophobic acrylic Vivinex™ with blue light filtering
6.0mm
13.0mm
+6.00D to +30.00D (in 0.5D increments)
118.9
2.0mm
HOYAAF-1 iSert (251)
ingle-piece hydrophobic acrylic aspheric intraocular lens
S
The iMics1 (251) IOL is a single piece IOL with a hydrophobic acrylic optic and partial
PMMA haptics made by chemically bonding blue PMMA to a yellow hydrophobic acrylic
material and then employing a lathe-cutting and refining process.
It has an aspheric profile and is tinted with a higher concentration of yellow to inhibit
retinal damage. iMics1 can be implanted into the eye through a small 2.2mm incision.
Key Features:
• MICS compatible
- 2.0mm sclerocorneal incision
- 2.2mm corneal incision
• Square edge design
• Without wound-assisted technique
(one-step implantation)
• Aspheric Balanced Curve (ABC) design (protects
from spherical aberration due to lens movement)
Model
Specification
Optic Material
Haptic Material
Optics diameter
Overall length
Power range
Estimated A-constant
IOL Master Constant
Recommended Incision Size
Incision Size
• Stiffer haptics (made from PMMA and soft
acrylic) provide firm fixation in the lens capsule
251
Aspheric blue filtering
Hydrophobic acrylic
Hydrophobic acrylic & PMMA
6.0mm
12.5mm
+6.00D to +30.00D (in 0.5D increments)
118.4
118.6
Sclerocorneal
Corneal
2.0mm
2.2mm
AF-1 251
10
2
1
Intraocular Lens
& AC StabilisAtion
HOYAAF-1 iSert 351 Toric
Single-piece aspheric toric hydrophobic acrylic intraocular lens
The AF-1 351 Toric IOL is a single piece IOL with a hydrophobic acrylic optic and partial
PMMA haptics . It is manufactured on the iMics platform. The 351 Toric IOL is preloaded
and injectable through a 2.2mm corneal incision.
Calculate IOL powers online at www.hoyatoric.com
Key Features:
• 2.2mm incision.
AF-1 351 Toric
• Aspheric Balanced Curve (ABC)
technology - provides protection
• Blue tipped PMMA (non-sticky) haptics
from high order spherical aberrations
facilitate rotation and placement in correct axis
caused by lens movement
• Stiffer haptics provide firm fixation in the lens
capsule, minimising rotation and movement
Model
Specification
Optic Material
Haptics Material
Haptics Configuration
Optics diameter
Overall length
IOL Powers
IOL cylinder Power
351 T3 to T9
Aspheric Toric optics
Hydrophobic acrylic resin
Acrylic resin & PMMA
Modified C-loop
6.0mm
12.5mm
+10.00D to +30.00D (in 0.5D increments)
1.50D 2.25D 3.00D 3.75D 4.5D
5.25D
6.0D
(351T3) (351T4) (351T5) (351T6) (351T7) (351T8) (351T9)
118.4
118.6
Estimated A-constant
IOL Master Constant
HOYA iSert Preloaded AF-1 PY-60AD
™
Three-piece hydrophobic acrylic aspheric intraocular lens
The iSert system is a reliable and easy preloaded IOL experience that saves time for
surgeon and staff. The AF-1 PY-60AD is a high quality 3-piece aspheric intraocular lens
with an extremely smooth aspheric surface. This IOL uses hydrophobic material for the
optics and PMMA chemically bonded for the haptics.
IOL Features:
• Blue light blocker for macula protection
• Aspheric Balanced Curve (ABC) design
progressive combination of optical balance
from spherical and aspherical design
• Thinner optic increases flexibilty
• Excellent centration minimises influence of
an off-set pupil or capsular bag
AF-1 PY-60AD
PY-60 Pre-loaded injector
• Better image quality and contrast sensitivity
Model
Specification
Optic Material
Optic Design
Haptic Material
Haptic Configuration
Optics diameter
Overall length
Power range
Estimated A-constant
IOL Master Constant
iSert Features:
• Mini incision delivery
• “One-step” technology
• Safe, reliable and easy to use
PY-60AD
Aspheric blue Blocker
Hydrophobic acrylic
Aspheric
PMMA chemically bonded
Round loop design
6.0mm
12.5mm
+6.00D – +30.00D (in 0.5D increments)
118.4
118.6
1
Intraocular Lens
& AC StabilisAtion
HOYA Toric Calculator
The Hoya Toric Calculator (HTC) is a resource to aid in proper IOL cylinder power
selection for cataract patients with corneal astigmatism.
The HTC requires the user to input patient biometric data and planned surgery
information that is part of an ophthalmic work up prior to toric IOL (TIOL) implantation.
The HTC will suggest several Hoya toric IOLs from which the surgeon may choose to
treat a patient’s refractive cylinder resulting from corneal astigmatism. The HTC will also
provide suggested intra-operative axial placement of the IOL that is intended to minimize
post-operative astigmatism based on the information provided.
The HTC is openly accessible on the internet for all users.
After the complete data set is entered, the graphic image of the eye will update to show
the entered data values. The calculator will also automatically generate three toric lens
options of different cylinder power for the user to consider. Astigmatic correction will be
calculated for all toric lens powers and a non toric lens as well.
The HTC will also inform the user of the recommended axis for toric IOL placement and
will include an image of the eye with the incision location, steep and flat corneal axes,
and the axis of placement for the toric IOL.
11
12
2
1
Intraocular Lens
& AC StabilisAtion
morcher Aniridia IOLs
Aniridia Intraocular Lenses
By implanting an aniridia IOL, a controlled amount of light enters the eye. With product
diversity, custom-made designs are available in a standard dioptre range, Morcher provide
the most comprehensive range for aniridia treatment available. All Morcher Aniridia
IOL’s require pre-registration with TGA before implantation. Contact us for a Category B
S.A.S. form.
Key Features:
• Product diversity
• Custom-made designs
• Individual dioptre range
Order # Description Qty/Box
Aniridia IOLs
Type 67B
Type 68
67B 68 67F 67G 67L 94A Type 67F
Type 67L
Type 67G
Type 94A
67 67D 67A 68C 67E 94 94C Pupil-Iris = 3-10mm, Overall Length 13mm, Angulation 0° Pupil-Iris = 4.5-10mm, Overall Length 13.5mm, Angulation 0° Pupil-Iris = 5-10mm, Overall Length 13.5mm, Angulation 0° Pupil-Iris = 5-10mm, Overall Length 12.5mm, Angulation 0°
Most frequently used implant Pupil-Iris = 5-10mm, Overall Length 13.5mm, Angulation 0°
Special IOL with opening in diaphragm 1.5-3mm Pupil-Iris = 6.5-10mm, Overall Length 13mm, Angulation 0°
Special Diaphragm only, no optical power 1
1
1
1
1
1
Partial Aniridia IOLs
Pupil-Iris = 3.5-7/10mm, Overall Length 12.5mm, Angulation 10° Pupil-Iris = 3.5-7/10mm, Overall Length 13.5mm, Angulation 5°
Allows scleral fi xation Pupil-Iris = 3.5-7/10mm, Overall Length 14mm, Angulation 10° Pupil-Iris = 3.5-7/10mm, Overall Length 14mm, Angulation 5°
Allows double scleral fi xation Pupil-Iris = 4-8mm, Overall Length 13.5mm, Angulation 5°
Allows scleral fi xation Pupil-Iris = 4-8mm, Overall Length 13.5mm, Angulation 10° Pupil-Iris = 4-8mm, Overall Length 13.5mm, Angulation 10°
Allows scleral fixation 1
1
1
1
1
1
1
morcher Aniridia Rings
Type 50C
Type 50E
In each case, two of these aniridia rings are implanted into the capsular bag and dialed
against each other to form a closed diaphragm. Rings are implanted before IOL.
Order # Description Qty/Box
Aniridia Rings
Type 50F
Type 96F
Type 96E
Type 96C
Type 96G
Type 94G
MORCHER-102 Type 50C Aniridia Ring, >6mm pupil / 2 required for 360º coverage
MORCHER-106 Type 50E Aniridia Ring, >3.5mm pupil / 2 required for 360º coverage
MORCHER-103 Type 50F Aniridia Ring, >4mm pupil / 2 required for 360º coverage
MORCHER-1003 Type 96C Sulcus Ring, Partial, >4mm pupil / 180º coverage
1
1
1
1
Capsular tension ring with a diaphragm to dim a coloboma in the eye not larger than
three hours. If the coloboma is three to six hours, two rings can be implanted.
MORCHER-920
MORC-96G
MORCHER-891
MORC-94G
Partial Aniridia Rings
Type 96F Partial Aniridia Ring, 90º coverage
Type 96G Partial Aniridia Ring, 90º coverage
Type 96E Partial Aniridia Ring, 90º coverage
Type 94G Partial Aniridia Ring, 90º coverage
1
1
1
1
1
Intraocular Lens
& AC StabilisAtion
13
morcher Capsular Tension Rings
Implantable capsular tension rings
A necessity to have available for modern cataract surgery, Morcher CTR’s are
manufactured from one-piece PMMA and stabilise the capsule in the case of damaged
or missing zonules. Easily implantable with all available injector systems or forceps and
now with the new PRE-LOADED SYSTEM on a DISPOSABLE INJECTOR, Morcher offer
the most comprehensive range for capsular bag stabilization.
Order # Description MORCHER-190 MORCHER-198 MORCHER-194 MORCHER-060 MORCHER-064 MORCHER-068 Qty/Box
Pre-Loaded CTR’s
EyeJet Preloaded Type R14 CTR, 10mm EyeJet Preloaded Type R14C CTR, 11mm EyeJet Preloaded Type R14A CTR, 12mm EyeJet Preloaded Type R13 CTR, 10mm EyeJet Preloaded Type R13A CTR, 11mm EyeJet Preloaded Type R13B CTR, 12mm 1
1
1
1
1
1
Type 13
Type 14
Standard CTR’s
MORCHER-202 MORCHER-206 MORCHER-204 MORCHER-050 MORCHER-052 MORCHER-054 Type 14 CTR, 10mm Type 14C CTR, 11mm Type 14A CTR, 12mm Type 13 CTR. 10mm Type 13A CTR. 11mm Type 13B CTR. 12mm 1
1
1
1
1
1
Cionni Type 1L
Scleral Fixation CTRs
MORCHER-220 Type 1L Cionni Ring with Single Scleral Fixation MORCHER-223 Type 2S Cionni Ring with Double Scleral Fixation MORCHER-165 6D Ahmed CTR Segment
1
1
1
Ahmed 6D
MORC-10GR
MORC-10LR
Preloaded Cionni CTR’s
Preloaded single Cionni ring TYPE10G for Trauma
Preloaded single Cionni ring TYPE10L for Marfans
Cionni Type 10L/10G
Duckworth & Kent
CTR Injection System
DK-7-810 Injector to insert the capsular tension ring. Bayonet fitting allows easy separation of main body and centre rod.
Overall length without cartridge 135.0mm 1
Cionni Type 2S
14
2
1
Intraocular Lens
& AC StabilisAtion
Injector Systems
medicel Accuject™ IOL injector
Micro-incision IOL injector
Over the last 10 years, Medicel has significantly contributed to the development of
microsurgical techniques, including lens injection systems. Over 1 million IOLs are
implanted every year with Medicel injection systems. Accuject™ enables safe and
efficient injection of 1- and 3-piece hydrophilic and hydrophobic lenses of any size and
design through incisions of sub 2.8mm to sub 2.0mm. The all-in-one concept and an
extra large loading chamber enables an easy and precise loading of any lens.
Accuject™ range
LP604500
LP604530
LP604510
LP604520
ACCUJECT 2.6-1P for 1-piece lenses
inc. size sub 2.8mm, box of 10
ACCUJECT 2.2-1P for 1-piece lenses
inc. size sub 2.5mm, box of 10
ACCUJECT 2.0-1P for 1-piece lenses
inc. size sub 2.2mm, box of 10
ACCUJECT 2.5-3P for 3-piece lenses
inc. size sub 2.8mm, box of 10