Tonichi Product Catalog

Transcription

Your Torque Partner
Through advances in torque technology, Tohnichi contributes to the
creation of a safer world by helping to obtain the highest level of product
safety in transportation, information technology, and many other fields
that affect our daily lives.
TORQUE CENTER
A wide variety of services available including: theoretical information, application
assistance, training seminars, and testing facilities.
Laboratory
Visitors can use this space.
Actual work piece is carried in and
proper tightening torque can be
measured.
Showroom
Tohnichi torque products are
set-up and displayed so that visitor
can have a clear look on what is
available on the torque market and
what will be coming up soon.
Lecture room
Various courses of torque
engineering seminars are available.
Training room
Tohnichi Torque Center in Tokyo
Our customers can attend
workshops, covering a global
training, general repair and
adjustment on torque products.
The above facilities and services are available at Tokyo, Osaka, Nagoya in Japan and
Tohnichi Europe in Belgium.
How to Select Torque Products (by Model)································ 2
From Torque Control to Tightening Assurance System············· 4
Torque Screwdriver
RTD––––––––––––––––––– Rotary Slip Adjustable Torque Screwdriver············ 6
RTDLS–––––––––––––––– Rotary Slip Adjustable Torque Screwdriver
with Limit Switch············································· 6
LTD– –––––––––––––––––– Adjustable Torque Screwdriver··························· 6
RTDZ––––––––––––––––– Rotary Slip Adjustable Insulated Torque Screwdriver· ·········· 6
RNTD––––––––––––––––– Rotary Slip Preset Torque Screwdriver· ················ 7
RNTDLS–––––––––––––– Rotary Slip Preset Torque Screwdriver
with Limit Switch············································· 7
NTD––––––––––––––––––– Preset Torque Screwdriver· ······························· 7
AMRD/BMRD–––––––– Rotary Slip Adjustable Torque Screwdriver for Small Screws· ···· 8
AMLD/BMLD––––––––– Adjustable Torque Screwdriver for Small Screws······ 8
FTD––––––––––––––––––– Dial Indicating Torque Screwdriver with Memory Pointer······· 8
MTD– ––––––––––––––––– Micro Dial Indicating Torque Screwdriver·············· 8
STC––––––––––––––––––– Digital Torque Screwdriver································· 9
Torque Wrench for Assembly
QL/QLE–––––––––––––––
QL-MH–––––––––––––––
CL/CLE–––––––––––––––
CL-MH––––––––––––––––
DQL/DQLE–––––––––––
MTQL–––––––––––––––––
PHL/PHLE––––––––––––
YCL–––––––––––––––––––
TiQL/TiQLE–––––––––––
PQL–––––––––––––––––––
PQLZ–––––––––––––––––
QRSP–––––––––––––––––
PCL–––––––––––––––––––
MT70N––––––––––––––––
Interchangeable Head Type Adjustable Torque Wrench······· 11
Interchangeable Head Type Adjustable
Torque Wrench with Metal Handle····················· 11
Interchangeable Head······························································· 32
Interchangeable Bit···································································· 36
Interchangeable Socket····························································· 37
Auxiliary Equipment··································································· 38
Connecting Cable & Other Accessories··································· 39
AUR–––––––––––––––––––
HAT–––––––––––––––––––
U/UR––––––––––––––––––
A/AC––––––––––––––––––
AS––––––––––––––––––––
AP– –––––––––––––––––––
DAP–––––––––––––––––––
ME/MC–––––––––––––––
MG/MF–––––––––––––––
AME–––––––––––––––––––
DCME– –––––––––––––––
Power Torque Tools
QSP–––––––––––––––––––
BQSP–––––––––––––––––
CSP–––––––––––––––––––
BCSP–––––––––––––––––
Dual Square Drives Type Adjustable Torque Wrench·········· 12
Torque Wrench for Motorsports························ 12
Pipe-Wrench Head Type Adjustable Torque Wrench··········· 13
Overtorque Prevention Interchangeable
Head Type Adjustable Torque Wrench················ 13
Titanium Type Adjustable Torque Wrench············ 13
Ratchet Head Type Pre-Lock Torque Wrench······· 14
Prelock Adjustable Insulated Torque Wrench· ······ 14
Open Ring Head Type Preset Torque Wrench······· 14
Interchangeable Head Type Pre-Lock Torque Wrench········· 15
Moto Tork (Prelock Adjustable Specialty
Torque Wrench)· ··········································· 15
Ratchet Head Type Preset Torque Wrench· ········· 16
Bi-Directional Type Preset Torque Wrench··········· 16
Interchangeable Head Type Preset Torque Wrench············ 17
Bi-Directional Interchangeable Head Type
Preset Torque Wrench···································· 17
DB/DBE/DBR–––––––– Dial Indicating Torque Wrench·························· 28
CDB-S–––––––––––––––– Interchangeable Head Type Dial Indicating Torque Wrench··· 28
SCDB-S– ––––––––––––– European Style Interchangeable
Head Type Dial Indicating Torque Wrench··········· 29
T-S–––––––––––––––––––– T-Handle Dial Indicating Torque Wrench· ············ 29
SF/F/FR– ––––––––––––– Beam Type Torque Wrench······························ 30
CSF/CF––––––––––––––– Interchangeable Head Type Beam Type Torque Wrench······· 30
Fully-Automatic Airtork··································· 42
Fully-Automatic Airtork··································· 43
Fully-Automatic Electric Torque Wrench· ············ 43
Multiple Unit (Pneumatic Straight Style)·············· 44
Multiple Unit (Pneumatic Straight Style)·············· 44
Multiple Unit (Pneumatic Right Angle Style)········· 44
Multiple Unit (Electric Straight Style)·················· 45
DOTE3-G––––––––––––– Digital Torque Wrench Tester···························· 46
DOT––––––––––––––––––– Analog Torque Wrench Tester··························· 46
TF––––––––––––––––––––– Fully Automatic Digital Torque Wrench Tester······· 47
TCC––––––––––––––––––– Torque Calibrator & Controller·························· 47
LC2-G– ––––––––––––––– Torque Wrench Line Checker··························· 48
ST2– –––––––––––––––––– SPINTORK (Rotary Peak Torque Meter)·············· 48
TDT2-G––––––––––––––– Digital Torque Screwdriver Tester······················ 49
ATG/BTG––––––––––––– Analog Torque Gauge····································· 49
BTGE––––––––––––––––– Digital Torque Gauge· ···································· 49
TME2––––––––––––––––– Digital Torque Meter······································· 50
TM–––––––––––––––––––– Analog Torque Meter······································ 50
TCF––––––––––––––––––– Fixed Type Torque Sensor······························· 51
TCR––––––––––––––––––– Rotary Type Torque Sensor······························ 51
Calibration Kit············································································ 52
BTM/B-BTM– ––––––––
Fcon––––––––––––––––––
TT2000– ––––––––––––––
FP–––––––––––––––––––––
FG– –––––––––––––––––––
RPTM–––––––––––––––––
CD42– ––––––––––––––––
R-DT999––––––––––––––
DFS–––––––––––––––––––
EPP16M2–––––––––––––
DECA–––––––––––––––––
Evertorque–––––––––––
Bolt Tension Meter· ······································· 53
Bolt Tension Stabilization································ 53
Ultrasonic Tension Meter· ······························· 54
Force Pen· ·················································· 55
Force Grip··················································· 55
Rope Tension Meter······································· 55
Optional Equipment
Torque Wrench for Quality Inspection
UNITORK (Straight & Pistol Pneumatic Torque Screwdriver)· ·· 41
Semi-Automatic Airtork· ································· 42
Force Measurement Instrument
SCSP––––––––––––––––– European Style Interchangeable
Head Type Preset Torque Wrench· ···················· 17
SP/SP-MH/RSP–––––– Open End/Ring Head Type Preset Torque Wrench······ 18
SP-H–––––––––––––––––– Torque Wrench for Piping Work· ······················· 19
SP-N/SP-N-MH–––––– Notched Head Type Preset Torque Wrench· ········ 19
CTA2–––––––––––––––––– Digital Torque and Angle Wrench· ····················· 20
WQL–––––––––––––––––– Analog Torque and Angle Wrench· ···················· 20
CPT––––––––––––––––––– PRO TORK (Digital Tightening Torque Wrench)····· 21
Error Proofing (Pokayoke) System············································ 22
MPQL/MQL–––––––––– Marking Torque Wrench·································· 23
CMQSP––––––––––––––– Marking Torque Wrench·································· 23
Torque Wrench with Limit Switch·············································· 24
FH256MC– ––––––––––– Radio Frequency Torque Wrench System············ 25
CNA-4mk2– –––––––––– POKA Patrol (Count Checker)· ························· 25
Tightening Data Management System······································ 26
UNITORK (Pistol Type Pneumatic Torque Screwdriver)····· 40
HANDYTORK (Battery Operated Torque Screwdriver)···· 40
Torque Tester/Checker
Head Type Adjustable Torque Wrench················ 12
Ratchet Head Type Adjustable Torque Wrench with Metal Handle· ··· 10
Accessories
SCL––––––––––––––––––– European Style Interchangeable
Ratchet Head Type Adjustable Torque Wrench····· 10
QF/QFR– ––––––––––––– Ratchet Head Beam Type Torque Wrench··········· 30
CEM3––––––––––––––––– DATA TORK (Digital Torque Wrench)· ················· 31
CTB––––––––––––––––––– Digital Retightening Torque Wrench· ·················· 31
Selection of Torque
Products
Contents
Compact Display· ········································· 56
Data Tank···················································· 56
Data Filing System (CD-ROM)·························· 56
Printer························································ 57
10:1 Ratio Torque Multiplier····························· 57
Lubricant for repairing torque products· ············· 57
Technical Data
Torque Settings for Torque Screwdrivers··································· 58
Torque Settings for Torque Wrenches······································· 59
Torque Conversion List······························································ 60
Standard Tightening Torque······················································ 61
1
Select the correct Tohnichi product for an application.
FOR TIGHTENING
If other types of head is requested
TORQUE
WRENCH
Nominal diameter
Nominal diameter
M4-M40
QL
In such working condition where resin handles are not suitable
CL
Tightening bolts at a given torque
QL-MH
Interchangeable head version of QL
Standard model for tightening
P.10
FOR INSPECTION
Inspecting the torque of tightened bolts
DB/CDB
Standard model for inspection
SP
Interchangeable head version of QSP
P.16
Metal handle version of CL
P.10
P.11
If tightening the same bolts at particular torque only
CSP
QSP
CL-MH
Metal handle version of QL
P.11
If tightening at one particular torque only
Preset version of QL
Selection of Torque
Products
Selection of Torque
Products
How to Select Torque Products (by Model)
P.17
SF/F/QF/CF
CEM3/CTB
Beam type
Digital type
SP-MH
Preset type open end head
P.18
RSP
NEW
Preset type ring head
P.18
For calibrating torque wrenches
P.28
P.30
P.31
FOR TIGHTENING
Tightening screws at a given torque
RTD/LTD/AMRD/AMLD
TORQUE
PRODUCTS
TORQUE
SCREWDRIVER
Nominal diameter
M1.6-M6
Rotary slip torque screwdriver
(Over-torque prevention) P.6
TCC
Tightening at one particular torque only
RNTD/NTD
Preset version of RTD
FOR INSPECTION
P.7
LC2-G Line Checker
FTD-S/FTD
Digital type
Direct reading type
P.9
Other Torque Measurement
P.8
ST2/ TCF / TCR
FOR MEASURING VERY
SMALL TORQUE
BTGE
Inspecting small torque ranging
from 0.05cN·m-150cN·m
Measuring torque for
special products
2
Size of interchangeable head
with 3-jaw chuck
P.49
FOR MEASURING CAP
OPENING TORQUE
For checking torque on bottle caps,
starting torque test, and twisting torque, etc.
* Interchangeable head type only
Digital type
P.49
TME2
TM
P.50
P.51
Example
CL 100 N × 15D
ATG/BTG
Analog type
P.48
Other Torque Wrench Testers:
DOT and TF models are also available.
P.48
TORQUE GAUGE/
TORQUE METER
P.46
For daily inspection of torque wrenches
STC
Inspecting the torque of
tightened screws
DOTE3-G
P.47
Digital type
P.50
Unit (N = N·m, CN = cN·m, MN = mN·m)
Torque range (Maximum torque in S.I. unit)
Model
Please refer to the "Torque Handbook"
for further technical information.
3
Tohnichi's Torque Assurance System advises the users how to tighten bolts properly and how to
eliminate various mistakes which occur during bolt tightening operations.
Characteristic factors (4M's) of defects in bolt tightening
3. MACHINE (Improper tightening equipment)
· Inaccuracy
· Mechanical failure
4. MATERIAL (Improper screw joint material)
· Part out of tolerance
· Defective part material
· Insufficient screw part lubricant
1. MAN (Tightening operator human error)
· Missed tightening
· Improper tightening tool usage
2. METHOD (Improper tightening specification)
· Wrong tightening value specification
· Wrong tightening procedure
· Wrong tightening tool selection
Total Tightening Management System, which completes tightening assurance, will be created
through cooperation of your staffs. Each component and product which consists of the system can
be sold separately. The components and products are described in the catalog.
TOHNICHI TIGHTENING ASSURANCE SYSTEM
Data Management System
for Backup
Pokayoke System
(Error-Proofing)
Pneumatic Tightening Data
Management System
Multiple Unit
Electric
Multiple Unit
Pneumatic Torque Driver
with Limit Switch
Torque Wrench
with Limit Switch
Remote Signal Type
Torque Wrench
ACLS
CSPFH
ME-TC
Manual Tightening Data
Management System
Battery Operated
Torque Wrench
QLLS
Torque Wrench
with Sensor
HATFH
Wired
MC-TC
Marking
Torque Wrench
CSPD
Special
Product
For Hexagon
Head Bolt
MPQL
AURLS
DCME-TC
Selection of Torque
Products
Selection of Torque
Products
From Torque Control to Tighetening Assurance System
Wired
Data Transfer
Torque Wrench
CSPFHDS
CEM3-BTD
(w/o Torque Display) Duplex
Special Product
Special Product
Wireless
Wireless
CSPFHD
(w/ Torque display)
Special Product
Wireless
Wireless
Wired
MPQLLS
Special Product
For Hexagon
Socket Head Bolt
CMQSP
Tightening Count Control
Visual Check
Tool Management System
for Pneumatic Tools
Receiver
R-FHD256
Special Product
Software
Need quotation
Inspection Data
Management System
Daily
Inspection
Bluetooth Adapter
Tool Management System
for Manual Tools
Periodical
Calibration
Digital Type
Torque Wrench
Rotary Peak
Torque Meter
Torque Sensor
Torque Indicator
CD42
wired
Software
Need quotation
Periodical
Calibration
Receiver
R-FH256
Count Checker
CNA-4mk2
Torque
Controller
EM250
Torque
Indicator
CD42
Wired
Daily
Inspection
Torque Wrench Tester
Torque Wrench Checker
CTB
ST2
TCF + TP
CEM3-BTS
Simplex
Special Product
Wireless
Wired
Torque
Indicator
CD42
Infrared
Wired
Wired
Infrared Receiver
R-DT999
Wired
Handy Terminal
HT-10
Need quotation
Software
Need quotation
4
CEM3
Software
Need quotation
DOTE3-G
TCC
TF
LC2-G
Wired
Handy Terminal
HT-10
Need quotation
Software
Need quotation
5
Rotary Slip Adjustable
Torque Screwdriver
RTD
Direction
Assembly
Rotary Slip
Graduation
• Ratcheting mechanism prevents over torque.
• Torque value easily set with external scale
Accuracy ±3%
S.I. Model
Torque Screwdriver
Adjustable
RTD60CN
Min.-Max.
Grad.
-
-
-
-
-
-
RTD15CN
RTD30CN
RTD120CN (with Resin Grip)
Torque Range
[cN·m]
Metric
Model
Torque Range
[kgf·cm]
Min.-Max.
Grad.
-
-
-
-
-
-
2-15
4-30
0.1
0.2
1.5RTD
3RTD
American
Model
Torque Range
[ozf·in/lbf·in]
Overall
Length
[mm]
Weight
[g]
Min.-Max.
ozf·in
Grad.
ozf·in
RTD24Z
RTD50Z
6-24
15-50
0.2
0.5
100
50
RTD100Z
20-100
1
110
80
lbf·in
lbf·in
0.2-1.5
0.4-3
0.01
0.02
100
50
0.2-1.5
0.4-3
0.01
0.02
1.5RTD-A
3RTD-A
RTD60CN
10-60
0.5
6RTD
1-6
0.05
6RTD-A
1-6
0.05
110
80
RTD120CN
RTD260CN
20-120
60-260
1
2
12RTD
26RTD
2-12
6-26
0.1
0.2
12RTD-A
26RTD-A
2-12
6-26
0.1
0.2
130
150
160
270
RTD500CN
100-500
5
50RTD
10-50
0.5
50RTD-A
10-50
0.5
155
320
1. Auxiliary tightening tool for RTD500CN is available, sold separately.
2. Bits are sold separately. Refer to page 36.
Note
Standard Accessories 1. Preset hook spanner (for RTD260CN and RTD500CN only)
2. Resin grip (for RTD120CN and RTD260CN only)
RTDLS
Torque Screwdriver
with Limit Switch
NEW
• RTD style with Limit Switch output
• Ideal for torque verification (Pokayoke)
assembly processes
RTDLS
Accuracy ±3%
Metric
Model
American
Model
Overall
Length
[mm]
RTDLS120CN
RTDLS260CN
12RTDLS
26RTDLS
12RTDLS-A
26RTDLS-A
184
201
340
450
RTDLS500CN
50RTDLS
50RTDLS-A
212
540
S.I. Model
Weight
POKA Patrol
(Count Checker)
CNA-4mk2
[g]
* Sold Separately
LTD
Adjustable Torque
Screwdriver
Direction
Assembly
Adjustable
Graduation
• Clicks at set torque value
• Torque value easily set with external scale
Accuracy ±3%
S.I. Model
Torque Range
[cN·m]
Min.-Max.
LTD60CN
Torque Range
[kgf·cm]
Min.-Max.
Grad.
American
Model
-
-
-
-
-
-
LTD24Z
-
-
-
-
-
-
LTD50Z
LTD100Z
2-15
4-30
10-60
0.1
0.2
0.5
1.5LTD
3LTD
6LTD
0.2-1.5
0.4-3
1-6
0.01
0.02
0.05
1.5LTD-A
3LTD-A
6LTD-A
20-120
60-260
100-500
200-1000
300-2000
1
2
12LTD
26LTD
50LTD
100LTD
200LTD
2-12
6-26
10-50
20-100
30-200
0.1
0.2
12LTD-A
26LTD-A
50LTD-A
100LTD-A
200LTD-A
LTD15CN
LTD30CN
LTD60CN
LTD120CN (with Resin Grip)
Grad.
Metric
Model
LTD120CN
LTD260CN
LTD500CN
LTD1000CN
LTD2000CN
Note
5
0.5
Torque Range
[ozf·in/lbf·in]
Min.-Max.
Grad.
ozf·in
6-24
ozf·in
0.2
15-50
20-100
lbf·in
0.2-1.5
0.4-3
1-6
lbf·in
2-12
6-26
10-50
20-90
30-180
0.5
1
lbf·in
0.01
0.02
0.05
lbf·in
0.1
0.2
0.5
0.5
Overall
Length
[mm]
Weight
[g]
100
50
110
80
100
50
110
80
130
150
155
185
255
160
270
320
580
1150
1. Auxiliary tightening tool for LTD500CN and LTD1000CN is available, sold separately.
3. Bits for LTD2000CN are supplied from only Tohnichi.
Standard Accessories 1. Preset hook spanner (for LTD260CN-LTD2000CN only)
2. LTD2000CN comes with an auxiliary tightening tool.
3. Resin grip (for LTD120CN and LTD260CN only)
RTDZ
Direction
Insulated Torque
Screwdriver
Assembly
Adjustable
Rotary Slip
Graduation
Resin Body
• Insulated casing prevents electric shocks.
• Ideal for electrical applications
Accuracy ±3%
S.I. Model
RTDZ260CN
RTDZ500CN
RTDZ260CN
6
Note
Torque Range
[cN·m]
Min.-Max.
60-260
100-500
Grad.
2
2.5
Metric
Model
26RTDZ
50RTDZ
2. Bits are not insulation coating.
Torque Range
[kgf·cm]
Min.-Max.
6-26
10-50
Grad.
0.2
0.25
Overall
Length
[mm]
150
186
Weight
[g]
220
380
Rotary Slip Preset
Torque Screwdriver
Assembly
Preset
Rotary Slip
• Preset version of RTD
• No external scale, Torque value set using tester
Direction
Accuracy ±3%
Torque Range
RNTD60CN
Model
[cN·m]
[kgf·cm]
[lbf·in]
RNTD15CN
Min.-Max.
5-15
Min.-Max.
0.5-1.5
Min.-Max.
0.5-1.3
RNTD30CN
10-30
1-3
1-2.5
RNTD60CN
20-60
2-6
2-5
RNTD120CN
RNTD260CN
40-120
100-260
4-12
10-26
200-500
20-50
RNTD500CN
Overall
Length
[mm]
Weight
[g]
95
71
4-10
10-22
110
110
180
20-40
120
270
1. A torque driver tester is necessary for torque setting.
Please specify required set torque when you order. (Ex. RNTD120CN x 100cN·m)
2. Torque adjusting bar is sold separately. Refer to page 38.
Note
Standard Accessories 1. Resin grip (for RNTD120CN and RNTD260CN only)
2. Auxiliary tightening bar (for RNTD500CN only)
RNTD120CN (with Resin Grip)
RNTDLS
Rotary Slip Preset
Torque Screwdriver
with Limit Switch
• RNTD style with Limit Switch output
assembly processes
RNTDLS
Accuracy ±3%
Torque Range
Model
[cN·m]
[kgf·cm]
[lbf·in]
Min.-Max. Min.-Max. Min.-Max.
RNTDLS120CN
40-120
4-12
4-10
NTD
Preset Torque
Screwdriver
Overall
Weight
Length
[mm]
[g]
166
320
RNTDLS260CN
100-260
10-26
10-22
167
390
RNTDLS500CN
200-500
20-50
20-40
175
480
Assembly
NEW
POKA Patrol
(Count Checker)
CNA-4mk2
* Sold Separately
Preset
• Preset version of LTD
• No external scale, Torque value set using tester
Direction
Accuracy ±3%
[cN·m]
Min.-Max.
Torque Range
[kgf·cm]
Min.-Max.
[lbf·in]
Min.-Max.
Overall
Length
[mm]
NTD15CN
NTD30CN
5-15
10-30
0.5-15
1-3
0.5-1.3
1-2.5
95
NTD60CN
NTD120CN
20-60
40-120
2-6
4-12
2-5
4-10
NTD260CN
NTD500CN
NTD1000CN
100-260
200-500
400-1000
10-26
20-50
40-100
10-22
20-40
40-90
Model
NTD60CN
Torque Screwdriver
RNTD
Weight
110
120
155
[g]
70
110
180
270
550
1. A torque driver tester is necessary for torque setting.
Please specify required set torque when you order. (Ex. NTD120CN x 100cN·m)
2. Torque adjusting bar is sold separately. Refer to page 38.
Note
NTD120CN (with Resin Grip)
Standard Accessories 1. Resin grip (for NTD120CN and NTD260CN only)
2. Auxiliary tightening bar (for NTD500CN and NTD1000CN only)
SPECIAL TOOLS FOR TORQUE SCREWDRIVER
RESIN GRIP (for 120CN, 260CN)
ADJUSTING TOOL (for RTD/LTD)
GREEN
GRAY
• Used for zero adjustment
BLUE
PRESET HOOK SPANNER
(for RTD/LTD)
• Make easier for middle and large
torque setting
ORANGE
RED
BLACK
For 120CN
For 260CN
Part #
850
Color
Orange
Applicable Model
851
852
853
854
855
Gray
Black
Green
Red
Blue
RTD120CN
LTD120CN
RNTD120CN
NTD120CN
Resin Grip
Dimensions
Part #
856
857
858
Color
Orange
Gray
Black
859
860
861
Green
Red
Blue
120CN
RTD
LTD
Applicable Model
RTD260CN
LTD260CN
RNTD260CN
NTD260CN
260CN
RNTD
NTD
RTD
LTD
RNTD
NTD
Hexagon width across flats
Maximum value [mm]
33
41
Hexagon width across corner
Maximum value [mm]
35
44
Length [mm]
67
67
81
68
Overall Length with torque
screwdriver [mm]
130
110
150
110
Part #
51
46
47
48
49
1046
Applicable Model
LTD/RTD15CN, 30CN
LTD/RTD60CN
LTD/RTD260CN
LTD/RTD500CN
LTD/RTD1000CN
LTD/RTD120CN
Part #
52
53
54
55
Applicable Model
LTD/RTD260CN
LTD/RTD500CN
LTD1000CN
LTD2000CN
AUXILIARY TIGHTENING TOOL
(for RTD/LTD/RNTD/NTD)
TORQUE ADJUSTING BAR
(for RNTD/NTD)
• Make easier for large torque
tightening
• Used for torque setting of preset
torque screwdriver
Part #
31
32
40
Applicable Model
LTD/RTD/NTD/RNTD500CN
LTD/NTD1000CN
LTD2000CN
Part #
42
43
44
Applicable Model
NTD/RNTD15CN-120CN
NTD/RNTD260CN
NTD/RNTD500CN-1000CN
7
AMRD/BMRD
Direction
Torque Screwdriver for
Small Screws
Assembly
Torque Screwdriver
BMRD30CN2
AMLD/BMLD
Direction
Adjustable Torque
Screwdriver for Small
Screws
S.I. Model
Torque Range
[cN·m]
Min.-Max.
cN·m
Grad.
cN·m
0.3-1
0.5-2
0.01
0.025
AMRD8CN
1-4
2-8
BMRD15CN2
BMRD30CN2
2-15
4-30
AMRD2CN
AMRD4CN
Assembly
Dial Indicating Torque
Screwdriver with
Memory Pointer
Direction
Min.-Max.
gf·cm
Grad.
gf·cm
100AMRD
200AMRD
30-100
50-200
1
2.5
0.05
0.1
400AMRD
800AMRD
100-400
200-800
0.1
0.2
1.5BMRD2
3BMRD2
kgf·cm
0.2-1.5
0.4-3
Adjustable
American
Model
Torque Range
[ozf·in/lbf·in]
Min.-Max.
ozf·in
Grad.
ozf·in
1-3
0.05
2-6
3-12
lbf·in
0.1
0.2
lbf·in
0.2-1.5
0.4-3
0.005
0.01
AMRD3Z
5
AMRD6Z
10
AMRD12Z
kgf·cm
0.01
0.02
1.5AMRD2-A
3AMRD2-A
Overall
Length
[mm]
93
Weight
Standard Accessory
Bit
[g]
+
- Thickness x Width
26
#0
0.15 x 1
0.2 x 1.5
0.3 x 2
116
50
-
-
Graduation
• Low torque version of LTD
• AMLD includes special size bits.
Accuracy ±3%
AMLD2CN
AMLD4CN
Torque Range
[cN·m]
Min.-Max.
cN·m
Grad.
cN·m
0.3-1
0.5-2
0.01
0.025
Metric
Model
Torque Range
[gf·cm/kgf·cm]
American
Model
Min.-Max.
gf·cm
Grad.
gf·cm
100AMLD
200AMLD
30-100
50-200
1
2.5
AMLD3Z
5
AMLD6Z
1-4
0.05
400AMLD
100-400
AMLD8CN
2-8
0.1
800AMLD
BMLD15CN2
BMLD30CN2
2-15
4-30
0.1
0.2
1.5BMLD2
3BMLD2
200-800
kgf·cm
0.2-1.5
0.4-3
Torque Range
[ozf·in/lbf·in]
Min.-Max.
ozf·in
Grad.
ozf·in
1-3
0.05
2-6
0.1
3-12
lbf·in
0.2
lbf·in
0.2-1.5
0.4-3
0.005
0.01
10
AMLD12Z
kgf·cm
0.01
0.02
1.5BMLD2-A
3BMLD2-A
Overall
Length
[mm]
83
[g]
Standard Accessory
Bit
+ - Thickness x Width
26
#0
Weight
0.15 x 1
0.2 x 1.5
0.3 x 2
116
50
-
-
1. Bits for BMLD are sold separately. Refer to page 36.
2. Bits for AMLD are supplied from only Tohnichi.
Note
FTD
Metric
Model
Torque Range
[gf·cm/kgf·cm]
1. Bits for BMRD are sold separately. Refer to page 36.
2. Bits for AMRD are supplied from only Tohnichi.
Note
AMLD1CN
BMLD30CN2
Graduation
Accuracy ±3%
S.I. Model
AMLD4CN
Rotary Slip
• Low torque version of RTD
• AMRD includes special size bits.
AMRD1CN
AMRD4CN
Adjustable
Inspection
Dial Indicating
Memory Pointer
Direct Reading
• Ideal for measuring torque
• FTD-S with memory pointer; FTD with preset knob
Accuracy ±3%
S.I. Model
FTD200CN2-S
Metric
Model
FTD2CN-S
Min.-Max.
cN·m
0.3-2
Grad.
cN·m
0.05
02FTD2-S
FTD5CN-S
0.5-5
0.1
05FTD2-S
FTD10CN-S
1-10
0.2
FTD20CN-S
FTD50CN-S
3-20
5-50
FTD100CN2-S
FTD200CN2-S
FTD400CN2-S
FTD100CN
Torque Range
[cN·m]
FTD8N2-S
FTD16N2-S
FTD50CN
FTD100CN
FTD200CN
FTD400CN
Torque Range
[gf·cm/kgf·cm]
American
Model
Torque Range
[ozf·in/lbf·in]
Min.-Max.
gf·cm
30-200
Grad.
gf·cm
5
FTD3Z2-S
Min.-Max.
ozf·in
0.5-3
Grad.
ozf·in
0.1
10 FTD7Z2-S
kgf·cm
0.02 FTD15Z2-S
1-7
0.2
1FTD2-S
50-500
kgf·cm
0.1-1
2-15
0.5
0.5
1
2FTD2-S
5FTD2-S
0.3-2
0.5-5
0.05
0.1
FTD30Z2-S
FTD70Z2-S
10-100
2
10FTD2-S
1-10
0.2
5FTD2-A-S
10FTD2-A-S
5-30
10-70
lbf·in
0.5-5
1-10
1
2
lbf·in
0.1
0.2
30-200
50-400
N·m
1-8
3-16
cN·m
10-50
20-100
5
10
N·m
0.2
0.5
cN·m
1
2
20FTD2-S
40FTD2-S
3-20
5-40
0.5
1
20FTD2-A-S
40FTD2-A-S
3-20
5-40
0.5
1
80FTD2-S
160FTD2-S
10-80
30-160
2
5
80FTD2-A-S
160FTD2-A-S
10-70
20-140
5FTD
10FTD
1-5
2-10
0.1
0.2
5FTD-A
10FTD-A
40-200
80-400
5
10
20FTD
40FTD
4-20
8-40
0.5
1.0
20FTD-A
40FTD-A
Overall
Length
[mm]
Weight
[g]
Standard Accessory
Bit
152
140
272
370
2
5
338
900
930
1-5
1-10
0.1
0.2
215
285
290
#1
3-20
5-40
0.5
1
263
390
410
#2
#3
1 x 12
0.7 x 7
0.9 x 7
FTD8N-S, FTD16N2-S: Square drive type (6.35mm).
Note
Standard Accessories Auxiliary tightening bar (for FTD8N2-S and FTD16N2-S only)
MTD
Micro Dial Indicating
Torque Screwdriver
Direction
Inspection
Dial Indicating
Direct Reading
• Low torque capacity version of FTD
• Requires special size bits
Accuracy ±3%
S.I. Model
MTD5MN
MTD1MN
MTD2MN
MTD5MN
MTD10MN
Note
8
Torque Range
[cN·m]
Min.-Max.
0.1-1
0.3-2
Grad.
0.02
0.05
0.5-5
1-10
0.1
0.2
Metric
Model
Torque Range
[gf·cm/kgf·cm]
10MTD
20MTD
Min.-Max.
1-10
3-20
Grad.
0.2
0.5
50MTD
100MTD
5-50
10-100
1
2
American
Model
Torque Range
[ozf·in/lbf·in]
-
Min.-Max.
-
Grad.
-
MTD07Z
MTD1.4Z
0.1-0.7
0.2-1.4
0.02
0.02
MTD models require Tohnichi made bits. Refer to page 36.
Overall
Length
[mm]
Weight
[g]
110
22
100
21
132
23
Standard Accessory
Bit
0.15 x 1
#0
0.2 x 15
0.3 x 2
STC
Digital Torque
Screwdriver
Direction
Inspection
Digital
Ratchet Head
Battery
Direct Reading
• Ideal for measuring torque
• Used to check torque screwdrivers
Accuracy ±1%
Min.-Max.
Grad.
-
-
-
Metric
Model
Torque Range
[kgf·cm]
Min.-Max.
Grad.
-
-
-
American
Model
Torque Range
[ozf·in/lbf·in]
Min.-Max.
ozf·in
Grad.
ozf·in
14-70
lbf·in
0.1
lbf·in
STC70Z
STC50CN
10-50
0.05
5STC
1-5
0.005
5STC-A
1-5
0.005
STC200CN
40-200
0.2
20STC
4-20
0.02
20STC-A
4-20
0.02
STC400CN
80-400
0.5
40STC
8-40
0.05
40STC-A
8-40
0.05
Overall
Length
[mm]
Weight
201
2. The handle of STC50CN has finger touch structure, different shape from the other STC models.
3. R-DT999 (Infrared Receiver) is necessary for data transfer.
Note
STC200CN
[EX.]
Checking for torque screwdriver
Torque screwdriver
to be checked
[g]
420
Torque Screwdriver
S.I. Model
Torque Range
[cN·m]
STC
STC Optional Accessories
Infrared Receiver (P.56)
Model
R-DT999
1. Connecting cable is unnecessary for data transfer between STC and R-DT999
due to infrared transmission.
Note
R-DT999
Printer (P.57)
Model
EPP16M2
1. Necessary for R-DT999 (Infrared Receiver) to take out measured data.
Note
Connecting Cable (P.39)
Part #
379
Applicable Models
R-DT999 ➝ EPP16M2
R-DT999 ➝ PC (D-Sub 9 Pin Female)
R-DT999 ➝ PC (USB A type)
575
584
EPP16M2
1. ( ) shows pin shape of the connecting cable.
2. Consult Tohnichi for other types of connecting cables.
Note
Data Filing System (P.56)
Model
DFS
Media
CD-ROM
575
9
QL/QLE
Ratchet Head
Type Adjustable
Torque Wrench
Direction
Assembly
Adjustable
Ratchet Head
Graduation
• Basic adjustable click style with resin grip
• Torque value easily set with external scale and knob
QL100N4
QL3N4
QLE750N
Accuracy ±3%
Torque Range
[cN·m]
S.I. Model
QL Optional Accessories
Min.-Max. Grad.
N·m
N·m
Torque Wrench for
Assembly
QL1.5N4
QL3N4
840
Carrying Case (P.38)
Applicable Model
Dimension [mm]
Part #
Weight
[kg]
100N-140N
840
50N
(H60 x W400 x D70)
0.25
200N
843
QLE Optional Accessories
Part #
301
Applicable Model
QLE550N-2100N
Torque Range
[Ibf·in/lbf·ft]
Overall Square
Weight
Length Drive
[g]
Min.-Max. Grad. [mm] [mm]
lbf·in
lbf·in
15QL4
30QL4
3-15
6-30
0.1
0.2
15QL4-A
30QL4-A
3-15
6-30
0.1
0.2
QL6N4
1-6
0.05
60QL4
10-60
0.5
QL50I-2A
10-50
0.5
QL12N4
2-12
0.1
120QL4
20-120
1
QL100I-2A
20-100
1
QL25N
QL50N
5-25
10-50
0.25
0.5
225QL3
450QL3
50-250
100-500
2.5
5
QL200I-3A
QL400I-3A
50-200
100-400
2.5
5
-
-
-
-
QL750I-3A
150-750
10
QL75F-3A
lbf·ft
15-75
lbf·ft
1
-
-
QL100F-4A
30-100
1
400
20 QL150F-4A
kgf·m
30-150
2
490
-
-
-
-
QL100N4
20-100
QL140N
30-140
QL200N4
40-200
1
2
QL280N
40-280
QL420N
QLE550N
QLE750N
60-420
100-550
100-750
QLE1000N
100-1000
QLE1400N
QLE2100N
200-1400
500-2100
5
10
20
-
-
900QL4
200-1000
1400QL3
300-1400
1800QL4
400-2000
kgf·m
2800QL3
4-28
4200QL2
5500QLE
7500QLE
6-42
10-55
10-75
10000QLE
10-100
14000QLE
21000QLE
20-140
50-210
10
0.2
0.5
1
2
-
160
0.19
195
0.25
230
260
0.25
0.45
9.53
335
-
-
-
695
QL300F-6A
QL400F-6A
QL600F-6A
60-300
100-400
100-600
2
995
1195
1370
QL700F-8A
100-700
QL1000F-8A
QL1500F-8A
150-1000
600-1500
5
0.16
6.35
0.69
12.7
0.88
1.4
2.0
19.05
3.4
5.1
7.1
25.4
13.1
20.0
1540
10
20
1795
1950
9.5
1. QL1.5N4-QL12N4, QL420N, QLE550N-QLE2100N have knurled handles.
2. QL25N-QL280N have resin grips.
3. For the model having 25.4mm square drive, use a through-hole socket.
Note
Adjusting Tool for QLE (P.38)
Min.-Max. Grad.
kgf·cm
kgf·cm
American
Model
0.01
0.02
0.36
(H80 x W520 x D80)
Torque Range
[kgf·cm/kgf·m]
0.3-1.5
0.6-3
0.5
(H90 x W429 x D120)
842
Metric
Model
Standard Accessories Adjusting tool (for QLE550N-QLE2100N)
QLLS
• QL style with Limit Switch output
assembly processes
S.I. Model
QLMS12N4
Metric Model
120QL4MS
QLLS25N
QLLS50N
QLLS100N4
QLLS140N
QLLS200N4
QLLS280N
QLLS420N
225QL3LS
450QL3LS
900QL4LS
1400QL3LS
1800QL4LS
2800QL4LS
4200QL2LS
QLLS100N4
POKA Patrol (Count Checker)
CNA-4mk2
* Sold separately
Head Type
QL-MH Ratchet
Adjustable Torque
Direction
Wrench with Metal
Handle
Assembly
QL-MH Optional Accessories
Part #
840
842
843
10
Applicable Model
Dimension [mm]
100N-140N
(H90 x W429 x D120)
50N
(H60 x W400 x D70)
200N
(H80 x W520 x D80)
Weight
[kg]
0.5
0.25
0.36
Ratchet Head
Graduation
• Knurled metal handle version of QL
• Ideal for oily working conditions
Accuracy ±3%
S.I. Model
QL100N4-MH
Adjustable
Torque Range
[N·m]
Min.-Max.
Grad.
QL25N-MH
QL50N-MH
QL100N4-MH
QL140N-MH
QL200N4-MH
5-25
10-50
20-100
30-140
40-200
0.25
0.5
QL280N-MH
40-280
1
Metric
Model
225QL-MH
450QL-MH
900QL4-MH
1400QL-MH
1800QL4-MH
2
2800QL-MH
Torque Range
[kgf·cm/kgf·m]
Min.-Max.
kgf·cm
50-250
100-500
200-1000
300-1400
400-2000
kgf·m
4-28
Grad.
kgf·cm
2.5
5
10
20
kgf·m
0.2
Overall
Length
[mm]
230
260
335
400
490
695
Square
Drive
[mm]
9.5
12.7
19.0
Weight
[g]
0.25
0.45
0.69
0.79
1.4
1.9
CL/CLE
Direction
Interchangeable
Head Type
Adjustable
Torque Wrench
Assembly
Adjustable
Graduation
Interchangeable
• Heads types can be easily exchanged.
• Torque value easily set with external scale and knob
CL100Nx15D
Interchangeable Head
CLE850Nx32D
CL3N4x8D
RH
RQH
QH
Accuracy ±3%
Tohnichi
Head
Size
FH
SH-N
10D
12D
19D
22D
Part #
Applicable Model
Dimension [mm]
Weight
[kg]
27D
842
50N
(H60 x W400 x D70)
0.25
32D
American
Model
Min.-Max. Grad.
kgf·cm
kgf·cm
Torque Range
[lbf·in/lbf·ft]
Overall
Weight
Length
[g]
Min.-Max. Grad. [mm]
lbf·in
lbf·in
0.3-1.5
0.6-3
0.01
0.02
15CL4
30CL4
3-15
6-30
0.1
0.2
15CL4-A
30CL4-A
3-15
6-30
0.1
0.2
1-6
0.05
60CL4
10-60
0.5
60CL4-A
10-50
0.5
140
0.13
175
0.16
200
230
0.22
CL12N4x8D
2-12
0.1
120CL4
20-120
1
120CL4-A
20-100
1
5-25
10-50
0.25
225CL3
450CL3
50-250
100-500
2.5
225CL3-A
450CL3-A
50-200
100-400
2.5
CL50Nx15D
10-50
500CL3
100-500
500CL3-A
100-450
900CL3-A
lbf·ft
15-75
lbf·ft
1
310
0.52
1400CL3-A
30-100
1
370
0.67
1800CL3-A
30-150
455
1.2
2800CL3-A
30-200
655
1.8
4200CL2-A
5500CLE-A
60-300
100-400
940
1140
3.1
4.7
7500CLE-A
8500CLE-A
12000CLE-A
100-550
150-600
200-860
1310
1315
1460
7.0
6.5
8.5
CL100Nx15D
20-100
CL140Nx15D
30-140
CL200Nx19D
40-200
0.5
1
CL280Nx22D
40-280
CL420Nx22D
CLE550Nx27D
60-420
100-550
CLE750Nx27D
CLE850Nx32D
CLE1200x32D
100-750
200-850
300-1200
2
5
10
5
900CL3
200-1000
1400CL3
300-1400
1800CL3
400-2000
20
kgf·m
2800CL3
kgf·m
4-28
4200CL2
5500CLE
6-42
10-55
7500CLE
8500CLE
12000CLE
10-75
20-85
30-120
10
0.2
0.5
1
5
2
5
10
0.37
235
1. Overall length does not include interchangeable head. Interchangeable heads are optional.
2. PH (Pipe wrench head) type interchangeable head is not available for this model.
3. CL1.5N4-CL12N4, CL420N, CLE550N-CLE2100N have knurled handles.
4. CL25N-CL280N have resin grips.
Standard Accessories Adjusting tool (for CLE550N-CLE1200N)
CLLS
Adjusting Tool for CLE (P.38)
Part #
301
Torque Range
[kgf·cm/kgf·m]
CL25Nx10D
CL50Nx12D
Note
CLE Optional Accessories
Metric
Model
Min.-Max. Grad.
CL6N4x8D
15D
CL Optional Accessories
S.I. Model
CL1.5N4x8D
CL3N4x8D
DH
8D
HH
Torque Range
[N·m]
Torque Wrench for
Assembly
AH
SH
Applicable Model
CLE550N-1200N
• CL style with Limit Switch output
• Ideal for torque verification (Pokayoke) assembly processes
S.I. Model
CLMS12N4x8D
Metric Model
120CL4MS
CLLS25Nx10D
CLLS50Nx12D
225CL3LS
450CL3LS
CLLS50Nx15D
CLLS100Nx15D
CLLS140Nx15D
CLLS200Nx19D
CLLS280Nx22D
CLLS420Nx22D
500CL3LS
900CL3LS
1400CL3LS
1800CL3LS
2800CL3LS
4200CL2LS
CNA-4mk2
* Sold separately
CL-MH
Direction
Interchangeable
Head Type
Adjustable Torque
Wrench with Metal
Handle
CL100Nx15D-MH
Assembly
Applicable Model
Dimension [mm]
Weight
[kg]
842
50N-100N
(H60 x W400 x D70)
0.25
Graduation
Accuracy ±3%
Tohnichi
Head
Size
15D
Part #
Interchangeable
• Knurled metal handle version of CL
• Ideal for oily working conditions
10D
12D
CL-MH Optional Accessories
Adjustable
19D
S.I. Model
CL25Nx10D
CL50Nx12D
CL50Nx15D
CL100Nx15D
CL140Nx15D
CL200Nx19D
Torque Range
[N·m]
Min.-Max.
Grad.
5-25
10-50
10-50
20-100
30-140
40-200
0.25
0.5
1
Metric
Model
225CL3
450CL3
500CL3
900CL3
1400CL3
1800CL3
2
22D
Note
CL280Nx22D
40-280
2800CL3
Torque Range
[kgf·cm/kgf·m]
Min.-Max.
kgf·cm
50-250
100-500
100-500
200-1000
300-1400
400-2000
kgf·m
4-28
Grad.
kgf·cm
2.5
5
10
20
kgf·m
0.2
Overall
Length
[mm]
Weight
[g]
200
235
235
310
370
455
0.22
655
1.6
0.37
0.52
0.67
1.2
1. Overall length does not include interchangeable head.
3. Interchangeable heads are optional.
11
Style
SCL European
Interchangeable Head Type
Direction
Adjustable Torque Wrench
Assembly
Adjustable
Graduation
Interchangeable
• Specialized version of CL
• Accepts DIN interchangeable head connection
Accuracy ±3%
Torque Range
[N·m]
S.I. Model
Min.-Max.
SCL50N-9x12
Torque Wrench for
Assembly
Weight
[kg]
9x12
215
0.22
SCL50N-9x12
SCL100N-9x12
10-50
20-100
0.5
1
9x12
9x12
239
313
0.37
0.52
40-200
2
14x18
464
1.2
2. Applicable to European style head only. Tohnichi's interchangeable heads are not available for this
model.
Assembly
Dual Square Drives
Type Adjustable Torque
Wrench
[mm]
5-25
SCL200N-14x18
Direction
Overall Length
[mm]
SCL25N-9x12
Note
DQL/DQLE
Head Size
Grad.
0.25
Adjustable
Ratchet Head
Graduation
Bi-directional
• For bi-directional tightening
• Idea for tightening large vehicle tires
DQL200N4
DQL200N4 Optional Accessories
Part #
Applicable Model
Dimension [mm]
Weight
[kg]
843
200N
(H80 x W520 x D80)
0.36
DQLE750N
Accuracy ±3%
Torque Range
[cN·m]
S.I. Model
DQL200N4
1800DQL4
Applicable Model
DQLE550N-1000N
Torque Wrench for
Motorsports
Direction
American
Model
Min.-Max. Grad.
kgf·cm
kgf·cm
400-1800
20 1800DQL4-A
DQL280N
40-280
2800DQL2
kgf·m
4-28
DQLE550N
DQLE750N
100-550
100-750
5500DQLE
7500DQLE
10-55
10-75
DQLE1000N
100-1000
10000DQLE
10-100
Note
Adjusting Tool for DQLE (P.38)
MTQL
40-200
2
DQLE Optional Accessories
Part #
301
Metric
Model
Min.-Max. Grad.
Torque Range
[kgf·cm/kgf·m]
5
kgf·m
0.2 2800DQL2-A
0.5
Torque Range
[lbf·ft]
Overall Square
Weight
Length Drive
[g]
30-150
490
12.7
1.4
2
30-200
695
5500DQL-A
7500DQL-A
100-400
100-600
1195
1370
19.0
5.1
7.1
10000DQL-A
100-700
1540
25.4
9.5
5
2.0
1. DQL200N4 and DQL280N have resin grips.
2. For the model having 25.4mm square drive, use a through-hole socket.
Standard Accessories Adjusting tool (for DQLE550-DQLE1000N)
Assembly
Adjustable
Ratchet Head
Graduation
• Wide capacity adjustable style
• Ideal for motorcycle & motorbike maintenance
Accuracy ±5%
S.I. Model
MTQL40N
MTQL70N
MTQL140N
MTQL70N
Torque Range
[N·m]
Min.-Max.
5-40
10-70
20-140
Standard Accessories Carrying case
MTQL Optional Accessories
Part #
840
842
12
Applicable Model
Dimension [mm]
70N, 140N
(H90 x W429 x D120)
40N-70N
(H60 x W400 x D70)
840
Weight
[kg]
0.5
0.25
Grad.
0.5
1
Metric
Model
400MTQL
700MTQL
1400MTQL
Torque Range
[kgf·m]
Min.-Max.
Grad.
0.5-4
1-7
2-14
0.05
0.1
Overall
Length
[mm]
250
285
400
Square
Drive
[mm]
9.5
12.7
Weight
[kg]
0.45
0.47
0.77
Direction
Pipe-Wrench Head Type
Adjustable Torque Wrench
Assembly
Adjustable
Accuracy ±5%
Torque Range
[N·m]
PHL50N
10-50
0.5
PHL100N
20-100
PHL140N
30-140
PHL200N
40-200
1
Torque Range
[kgf·cm/kgf·m]
Metric
Model
Min.-Max. Grad.
Min.-Max. Grad.
kgf·cm
kgf·cm
500PHL
100-500
200-900
1400PHL
400-1400
1800PHL
400-1800
kgf·m
Part #
Applicable Model
301
PHLE850N, 1300N
Prevention
YCL Overtorque
Direction
Type Adjustable Torque
Wrench
Direction
Titanium Type Adjustable
Torque Wrench
100-400
lbf·ft
900PHL3-A
15-75
1400PH3-A
30-100
20 1800PHL3-A
kgf·m
5
lbf·ft
1
13-38
30-150
335
1.46
410
1.61
470
1.76
550
2.3
765
2.92
1080
1600
1745
4.83
9.63
11.63
2
2800PHL
4-28
0.2
2800PHL3-A
30-200
3
5
4200PHL
8500PHLE
6-42
20-85
0.3
0.5
PHLE1300N
300-1300
10
13000PHLE
30-130
1
4200PHL-A
8500PHLE-A
13000PHLE-A
60-300
150-600
300-900
3
5
10
26-52
E Models have extension bar handle.
Standard Accessories Adjusting tool (for PHLE850N, PHLE1300N)
Assembly
Adjustable
Graduation
Interchangeable
Two Step Motion
• Two step motion prevents over-torque.
• Primary click followed by break and secondary click
Accuracy ±3%
S.I. Model
Torque Range
[N·m]
Torque Range
[kgf·cm]
Metric
Model
Min.-Max. Grad.
Min.-Max. Grad.
Torque Range
[lbf·in/lbf·ft]
Overall
Weight
Length
[kg]
American
Model
YCL12Nx10D
5-12
0.1
120YCL
50-120
1
YCL100I
lbf·in
50-100
lbf·in
1
YCL23Nx10D
YCL45Nx12D
10-23
20-45
0.2
0.25
230YCL
450YCL
100-230
200-450
2
2.5
YCL200I
YCL400I
100-200
200-400
2
2.5
YCL70Nx12D
YCL90Nx15D
30-70
40-90
0.5
0.25
700YCL
900YCL
300-700
400-900
5
2.5
YCL600I
YCL750I
300-600
400-750
5
2.5
15D
YCL140Nx15D
60-140
1400YCL
600-1400
YCL1000I
lbf·in
600-1000
lbf·ft
lbf·in
5
lbf·ft
19D
YCL180Nx19D
80-180
1800YCL
800-1800
YCL100F
YCL150F
45-100
80-150
0.5
10D
Assembly
0.5
Pre-Lock
Ratchet Head
5
Graduation
226
0.32
275
0.50
369
1.0
570
1.70
Titanium Material
• 50% lighter than standard wrenches
• Ideal for working overhead
Accuracy ±3%
Torque Range
[N·m]
Min.-Max.
TiEQLE750N
450PHL3-A
40-280
S.I. Model
TiQL180N
Grippable Overall
Weight
Pipe Dia. Length
[mm]
[g]k
lbf·in
lbf·in
60-420
200-850
12D
TiQL/TiQLE
Torque Range
[lbf·in/lbf·ft]
PHL280N
Tohnichi
Head
Size
YCL90N×15D
10
American
Model
PHL420N
PHLE850N
Note
Adjusting Tool for PHLE (P.38)
5
900PHL
2
PHLE Optional Accessories
Pipe-Wrench Head
• Ideal for use with pipes and plumbing applications
S.I. Model
PHL140N
Graduation
Torque Wrench for
Assembly
PHL/PHLE
TiQL180N
TiLQL180N
TiEQL360N
TiEQLE750N
TiEQLE1400N
40-180
80-360
100-750
200-1400
Metric
Model
Grad.
2
1800TiQL
1800TiLQL
5
10
3600TiEQL
7500TiEQLE
14000TiEQLE
Torque Range
[kgf·cm/kgf·m]
Min.-Max.
kgf·cm
Grad.
kgf·cm
40-1800
20
kgf·m
8-36
10-75
20-140
kgf·m
0.2
0.5
1
Overall
Length
[mm]
Square
Drive
[mm]
494
594
12.7
987
1365
1794
Weight
19.0
25.4
[kg]
0.9
1.0
2.4
4.5
7.5
For the model having 25.4mm square drive, use a through-hole socket.
Note
Standard Accessories 1. Hex key and Color marking bands (for TiQL180N, TiLQL180N and TiEQL360N)
2. Adjusting tool (for TiEQLE750N, TiEQLE1400N)
TiEQLE Optional Accessories
TiQLLS
Adjusting Tool for TiEQLE (P.38)
Part #
301
Applicable Model
TiEQLE750N, 1400N
• TiQL style with Limit Switch output
• Ideal for torque verification
(Pokayoke) assembly processes
S.I. Model
TiQLLS180N
TiLQLLS180N
TiEQLLS360N
CNA-4mk2
Metric Model
1800TiQLLS
1800TiLQLLS
3600TiEQLLS
* Sold separately
13
PQL
Ratchet Head Type
Pre-Lock Torque
Wrench
Assembly
Pre-Lock
Ratchet Head
Graduation
• External scale but requires hex key to set
Direction
PQL100N4
Accuracy ±3%
S.I. Model
PQL Optional Accessories
Torque Wrench for
Assembly
Part #
840
842
Applicable Model
Dimension [mm]
Weight
[kg]
100N-140N
(H90 x W429 x D120)
50N
(H60 x W400 x D70)
Min.-Max. Grad.
kgf·cm
kgf·cm
American
Model
Torque Range
[lbf·in/lbf·ft]
Overall Square
Weight
Length Drive
[kg]
lbf·in
lbf·in
PQL6N4
PQL12N4
PQL25N
1-6
2-12
5-25
0.05
0.1
0.25
60PQL4
120PQL4
225PQL
10-60
20-120
50-250
0.5
1
2.5
60PQL4-A
120PQL4-A
225PQL-A
10-50
20-100
50-200
0.5
1
2.5
PQL50N
10-50
0.5
450PQL
100-500
5
450PQL-A
100-400
5
lbf·ft
lbf·ft
PQL100N4
PQL140N
20-100
30-140
PQL200N4
40-200
1
0.5
0.25
Torque Range
[kgf·cm]
Metric
Model
Min.-Max. Grad.
840
Torque Range
[N·m]
PQL280N
40-280
PQL420N
60-420
2
900PQL4
1400PQL
200-1000
300-1400
1800PQL4
190
215
250
10
900PQL4-A
1400PQL-A
15-75
30-100
1
320
385
400-2000
20
1800PQL4-A
30-130
2
470
2800PQL
kgf·m
4-28
kgf·m
0.2
-
-
-
670
4200PQL
6-42
-
-
-
975
6.35
0.19
0.25
9.5
0.40
0.65
0.75
12.7
1.40
2.0
19.0
3.4
Standard Accessories Hex key (for torque adjustment)
PQLLS
• PQL style with Limit Switch output
• Ideal for torque verification (Pokayoke) assembly
processes
S.I. Model
PQLLS25N
Metric Model
225PQLLS
PQLLS50N
PQLLS100N4
450PQLLS
900PQL4LS
PQLLS140N
PQLLS200N4
1400PQLLS
1800PQL4LS
PQLLS280N
PQLLS420N
2800PQLLS
4200PQLLS
CNA-4mk2
* Sold separately
PQLZ
Prelock Adjustable
Insulated Torque
Wrench
Direction
Assembly
Pre-Lock
Ratchet Head
Graduation
Vinyl Coating
• Insulated casing prevents electrical shocks.
• Specialized version of PQL
Accuracy ±3%
Torque Range
[N·m]
S.I. Model
Min.-Max.
PQLZ25N
PQLZ100N4
PQLZ100N4
QRSP
Grad.
0.25
1
225PQLZ
900PQLZ4
Torque Range
[kgf·cm]
Min.-Max.
50-225
200-900
Assembly
Preset
227
340
9.5
12.7
[kg]
0.28
0.80
Accuracy ±3%
QRSP38Nx17
QRSP38Nx19
QRSP38Nx21
QRSP38Nx24
QRSP38Nx17
QRSP Optional Accessories
Thrustring Tool for QRSP (P.38)
[N·m]
[kgf·cm]
Min.-Max.
Min.-Max.
Overall Length
Weight
[mm]
[kg]
300
10-45
100-450
305
310
0.4
0.43
A torque wrench tester is necessary for torque setting. Please specify required set torque when you order.
(Ex. QRSP38Nx17 x 25N·m)
Note
QRSPLS
Applicable Model
QRSP38N
Model
QRSPLS38Nx17
QRSPLS38Nx19
QRSPLS38Nx21
QRSPLS38Nx24
• QRSP style with Limit Switch output
processes
Weight [kg]
0.4
CNA-4mk2
0.43
* Sold separately
14
Weight
• Ring head opens to allow fitting on tubes or pipes.
Model
Tool #
A-3
Square
Drive
[mm]
Open Ratchet Head
Torque Range
Part #
312
Grad.
2.5
10
Overall
Length
[mm]
Open Ring Head
Type Preset Torque
Wrench
Direction
5-25
20-100
Metric
Model
PCL
Type Pre-lock Torque
Wrench
Direction
Assembly
Pre-Lock
Interchangeable
Graduation
• Interchangeable head version of PQL
• External scale but requires hex key to set
PCL100Nx15D
Accuracy ±3%
SH
AH
Min.-Max. Grad.
PCL6N4x8D
PCL12N4x8D
RQH
DH
FH
SH-N
1-6
2-12
0.05
0.1
0.25
10D
PCL25Nx10D
5-25
12D
PCL50Nx12D
10-50
PCL50Nx15D
10-50
15D
HH
Metric
Model
Torque Range
[kgf·cm]
American
Model
Min.-Max. Grad.
RH
8D
QH
S.I. Model
Torque Range
[N·m]
19D
PCL100Nx15D
20-100
PCL140Nx15D
PCL200Nx19D
30-140
40-200
60PCL4
120PCL4
0.5
1
2
10-60
20-120
0.5
1
60PCL4-A
120PCL4-A
2.5
225PCL
50-250
450PCL
100-500
500PCL
100-500
900PCL
200-1000
1400PCL
1800PCL
300-1400
400-2000
5
10
20
Torque Range
[lbf·in/lbf·ft]
Overall
Weight
Length
Min.-Max. Grad. [mm] [kg]
lbf·in
lbf·in
10-50
20-100
0.5
1
170
0.16
225PCL-A
50-200
2.5
195
0.22
450PCL-A
100-400
500PCL-A
100-450
lbf·ft
900PCL4-A
15-75
1400PCL-A
1800PCL-A
30-100
30-130
5
220
0.32
225
lbf·ft
1
2
295
0.48
355
435
0.63
1.3
Note
PCLLS
Torque Wrench for
Assembly
Tohnichi
Head
Size
• PCL style with Limit Switch output
S.I. Model
PCLLS25Nx10D
Metric Model
225PCLLS
PCLLS50Nx12D
PCLLS50Nx15D
450PCLLS
500PCLLS
PCLLS100Nx15D
PCLLS140Nx15D
900PCLLS
1400PCLLS
PCLLS200Nx19D
1800PCLLS
CNA-4mk2
* Sold separately
MT70N
Direction
Moto Tork (Prelock
Adjustable Specialty
Torque Wrench)
Assembly
Pre-Lock
Interchangeable
Graduation
• Converts basic hand tools into torque wrenches
• Ideal for motorcycle maintenance
Accuracy ±5%
S.I. Model
MT70N
Note
MT70N
Torque Range
[N·m]
Min.-Max.
10-70
Grad.
0.2
Metric
Model
MT-7
Torque Range
[kgf·m]
Min.-Max.
Grad.
Overall
Length
[mm]
1.0 -7.0
0.02
238
Weight
[kg]
0.65
1. Ring head wrench (shown in the photo) is not included.
2. Max. clamp width for interchangeable tool is approx. 21mm.
3. Min. interchangeable hex wrench key size is 5mm.
Standard Accessories 1. Carrying case
2. Hex key wrench (for torque adjustment)
15
QSP
Ratchet Head Type
Preset Torque Wrench
Direction
Assembly
Preset
Ratchet Head
• No external scale, Torque value set using key & tester
• Ideal for mass production application
QSP100N4
QSP Optional Accessories
Accuracy ±3%
Torque Range
Model
Thrustring Tool (P.38)
Torque Wrench for
Assembly
Part #
Tool #
QSP1.5N4
Applicable Model
310
311
A-1
A-2
1.5N-6N
12N, 25N
312
A-3
50N-140N
313
314
A-4
A-5
200N-280N
420N
QSP3/QSP4 Optional
Accessories
[N·m]
[kgf·cm/kgf·m]
[lbf·in]
Min.-Max.
Min.-Max.
kgf·cm
Min.-Max.
lbf·in
Overall
Length
[mm]
0.3-1.5
3-15
3-13
QSP3N4
QSP6N4
0.6-3
1-6
6-30
10-60
6-25
10-50
165
QSP12N4
2-12
20-120
20-100
175
QSP25N3
5-25
50-250
50-200
215
QSP50N3
QSP100N4
10-50
20-100
100-500
200-1000
100-400
-
240
315
QSP140N3
30-140
300-1400
300-1000
380
QSP200N4
40-200
400-2000
kgf·m
350-1600
465
QSP280N3
40-280
4-28
350-2500
665
QSP420N
60-420
6-42
600-3600
970
Square
Drive
[mm]
Weight
[kg]
0.16
6.35
0.19
0.25
0.25
9.53
0.4
0.65
12.7
0.7
1.2
1.8
19.05
3.1
1. Adjusting tools for QSP and QSP3/QSP4 are different (see Optional Accessories). Adjusting tools are
sold separately.
2. A torque wrench tester is necessary for torque setting. Please specify required set torque when you
order. (Ex. QSP100N4 x 80N·m)
Note
Adjusting Tool (P.38)
Part #
Applicable Model
QSP25N3
931
QSP1.5N4-12N4
QSP50N3-280N3
930
QSP100N4, 200N4
QSPLS
• QSP style with Limit Switch output
Model
QSPMS12N4
CNA-4mk2
QSPLS25N3
QSPLS50N3
QSPLS100N4
QSPLS140N3
QSPLS200N4
QSPLS280N3
QSPLS420N
* Sold separately
BQSP
Direction
Bi-Directional Type
Preset Torque
Wrench
Assembly
Preset
Ratchet Head
• Clicks for both CW & CCW applications
• Specialized version of QSP
BQSP100N4
BQSP Optional Accessories
Part #
Tool #
311
312
313
314
A-2
A-3
A-4
A-5
Accuracy ±3%
Applicable Model
Torque Range
25N
50-140N
200N, 280N
420N
Model
BQSP3/BQSP4 Optional
Accessories
Part #
931
930
16
Applicable Model
BQSP25N3
BQSP50N3-280N3
BQSP100N4, 200N4
Bi-directional
Note
[N·m]
Min.-Max.
BQSP25N3
BQSP50N3
BQSP100N4
BQSP140N3
BQSP200N4
5-25
10-50
20-100
30-140
40-200
BQSP280N3
BQSP420N
40-280
60-420
[kgf·cm/kgf·m]
Min.-Max.
kgf·cm
50-250
100-500
200-1000
300-1400
400-2000
kgf·m
4-28
6-42
[lbf·in]
Min.-Max.
lbf·in
50-200
100-400
100-750
300-1000
350-1600
350-2500
600-3600
Overall
Length
[mm]
214
242
314
379
462
665
971
Square
Drive
[mm]
9.5
12.7
19.0
Weight
[kg]
0.20
0.40
0.63
0.73
1.3
2.4
3.7
1. BQSP25N3-BQSP140N3 have resin grips.
2. BQSP200N4-BQSP420N have knurled handles.
3. Adjusting tools for BQSP and BQSP3/BQSP4 are different.
4. A torque wrench tester is necessary for torque setting. Please specify required set torque when you
order. (Ex. BQSP50N3 x 30N·m)
Direction
Assembly
Preset
• Interchangeable head version of QSP
• No external scale, Torque value set
using key & tester
Model
CSP Optional Accessories
Tool #
Applicable Model
310
311
A-1
A-2
1.5N-6N
12N, 25N
312
A-3
50N-140N
313
314
A-4
A-5
200N-280N
420N
CSP3/CSP4 Optional Accessories
Part #
Applicable Model
931
CSP25N3
CSP1.5N4-12N4
AH
RH
QH
RQH
DH
3-13
0.6-3
6-30
6-25
8D
CSP6N4x8D
CSP12N4x8D
1-6
2-12
10-60
20-120
10-50
20-100
Weight
[kg]
130
0.2
165
10D
CSP25N3x10D
5-25
50-250
50-200
195
CSP50N3x12D
10-50
100-500
100-400
215
15D
CSP50N3x15D
CSP100N3x15D
10-50
20-100
100-500
200-1000
100-400
100-750
220
290
0.45
CSP140N3x15D
30-140
300-1400
300-1000
350
0.55
19D
CSP200N3x19D
40-200
400-2000
350-1600
430
1.0
40-280
60-420
kgf·m
4-28
6-42
350-2500
600-3600
625
920
1.4
2.7
CSP280N3x22D
CSP420Nx22D
22D
0.3
2. Adjusting tools for CSP and CSP3/CSP4 are different. (see Optional Accessories)
4. A torque wrench tester is necessary for torque setting. Please specify required set torque when you order.
(Ex. CSP100N3x15D x 80N·m)
CSPLS
• CSP style with Limit Switch output
processes
Model
CSPMS12N4x8D
CNA-4mk2
CSPLS25N3x10D
CSPLS50N3x12D
CSPLS50N3x15D
CSPLS100N3x15D
FH
CSPLS140N3x15D
CSPLS200N3x19D
CSPLS280N3x22D
CSPLS420N3x22D
Bi-Directional
Interchangeable
Head Type Preset
Torque Wrench
Accuracy ±3%
Overall
Length
[mm]
12D
PH
Direction
Min.-Max.
0.3-1.5
Note
SH
BCSP
[lbf·in]
Min.-Max.
CSP3N4x8D
SH-N
[kgf·cm/kgf·m]
kgf·cm
3-15
CSP50N3-280N3
HH
[N·m]
Min.-Max.
CSP1.5N4x8D
Part #
CSP100N3×15D
Torque Range
Tohnichi
Head
Size
930
Interchangeable
Torque Wrench for
Assembly
CSP
Type Preset Torque
Wrench
Assembly
Preset
* Sold separately
Bi-directional
Interchangeable
• Clicks for both CW & CCW applications
• Specialized version of CSP
BCSP100N3x15D
Accuracy ±3%
BCSP Optional Accessories
Part #
Tool #
Applicable Model
311
312
313
314
A-2
A-3
A-4
A-5
25N
50-140N
200N-280N
420N
BCSP3 Optional Accessories
Part #
931
930
Applicable Model
BCSP25N3
BCSP50N3-280N3
SCSP
Direction
European Style
Interchangeable
Head Type Preset
Torque Wrench
Torque Range
Tohnichi
Head
Size
Model
10D
12D
15D
19D
22D
[N·m]
Min.-Max.
BCSP25N3x10D
BCSP50N3x12D
BCSP50N3x15D
BCSP100N3x15D
BCSP140N3x15D
BCSP200N3x19D
5-25
10-50
10-50
20-100
30-140
40-200
BCSP280N3x22D
BCSP420Nx22D
40-280
60-420
[kgf·cm/kgf·m]
Min.-Max.
kgf·cm
50-250
100-500
100-500
200-1000
300-1400
400-2000
kgf·m
4-28
6-42
[lbf·in]
Min.-Max.
Overall
Length
[mm]
50-200
100-400
100-400
100-750
300-1000
350-1600
193
214
217
290
349
427
0.57
0.62
1.2
350-2500
600-3600
625
918
2.0
3.7
Weight
[kg]
0.20
0.23
1. Overall length does not include interchangeable head. Interchangeable heads are optional.
2. BCSP25N3-BCSP140N3 have resin grips.
3. BCSP200N3-BCSP420N have knurled handles.
4. Adjusting tools for BCSP and BCSP3 are different. (see Optional Accessories)
(Ex. BCSP100N3x15D x 80N·m)
Note
Assembly
Preset
Interchangeable
• Specialized version of CSP
Accuracy ±3%
Torque Range
SCSP50N-9x12
Note
Model
[N·m]
SCSP25N-9x12
SCSP50N-9x12
SCSP100N-9x12
SCSP200N-14x18
Min.-Max.
5-25
10-50
20-100
40-200
[kgf·cm]
Min.-Max.
50-250
100-500
200-1000
400-2000
Head Size
Overall Length
[mm]
[mm]
Weight
[kg]
9x12
9x12
9x12
14x18
204
230
302
434
0.15
0.3
0.45
1
2. Applicable to European style head only. Tohnichiﾕs interchangeable heads are not available for this model.
17
SP/SP-MH/RSP
Direction
Assembly
Preset
·······SP, SP-MH
Open End Spanner
Ring Head
• Various sizes of open end or ring heads fixed on wrench
• Ideal for specific bolt size application
Open End/Ring Head
Type Preset Torque
Wrench
·······RSP
NEW
SP38Nx10-MH
SP38Nx10
RSP38Nx14
Accuracy ±3%
Torque Wrench for
Assembly
Model (Body Size x Width)
18
SP
SP-MH
SP2Nx5.5
SP2Nx7
SP2Nx8
SP2Nx10
SP2Nx12
SP2Nx13
SP2Nx17
SP2Nx19
SP8Nx7
SP8Nx8
SP8Nx9
SP8Nx10
SP8Nx12
SP8Nx13
SP8Nx19
SP8Nx24
SP8Nx27
SP19Nx10
SP19Nx11
SP19Nx12
SP19Nx13
SP19Nx14
SP19Nx17
SP19Nx19
SP19Nx21
SP19N-1x10
SP19N-2x10
SP19N-3x10
SP38Nx8
SP38Nx9
SP38Nx10
SP38Nx11
SP38Nx12
SP38Nx13
SP38Nx14
SP38Nx16
SP38Nx17
SP38Nx19
SP38Nx22
SP38Nx24
SP38Nx27
SP38N-1x10
SP38N-2x10
SP38N-3x10
SP67Nx14
SP67Nx16
SP67Nx17
SP67Nx18
SP67Nx19
SP67Nx21
SP67Nx22
SP67Nx24
SP67Nx27
SP67Nx29
SP67Nx30
SP67Nx32
SP67Nx33.3
SP120Nx14
SP120Nx17
SP120Nx18
SP120Nx19
SP120Nx21
SP120Nx22
SP120Nx23
SP120Nx24
SP120Nx27
SP120Nx30
SP160Nx19
SP160Nx21
SP160Nx22
SP160Nx24
SP160Nx26
SP160Nx27
SP160Nx41
SP220Nx19
SP220Nx22
SP19Nx10-MH
SP19Nx11-MH
SP19Nx12-MH
SP19Nx13-MH
SP19Nx14-MH
SP19Nx17-MH
SP19Nx19-MH
SP19Nx21-MH
SP19N-1x10-MH
SP19N-2x10-MH
SP19N-3x10-MH
SP38Nx8-MH
SP38Nx9-MH
SP38Nx10-MH
SP38Nx11-MH
SP38Nx12-MH
SP38Nx13-MH
SP38Nx14-MH
SP38Nx16-MH
SP38Nx17-MH
SP38Nx19-MH
SP38Nx22-MH
SP38Nx24-MH
SP38Nx27-MH
SP38N-1x10-MH
SP38N-2x10-MH
SP38N-3x10-MH
-
Torque Range
Head Dimension
[N·m]
[kgf·cm] O.W. x Thickness
[mm]
Min.-Max. Min.-Max.
23x5
0.4-2
Overall
Length
[mm]
Weight
28x6
29x8
180
185
190
195
0.15
23x5
1.5-8
15-80
25x5.5
29x8
34x8
40x8
180
185
195
200
27x6.5
210 (206)
30x6.5
3.5-19
35-190
31x8
33x8
35x8
24x12
24x20
24x15
SP
SP-MH
SP220Nx24
SP220Nx27
SP220Nx29
SP220Nx30
SP220Nx32
SP220Nx34
SP220Nx36
SP310Nx22
SP310Nx24
SP310Nx27
SP310Nx30
SP310Nx32
SP310Nx41
SP310Nx46
SP420Nx27
SP420Nx30
SP420Nx32
SP420Nx34
SP420Nx35
SP420Nx36
SP560Nx30
SP560Nx32
SP560Nx36
SP560Nx46
SP560Nx55
-
[kg]
4-20
25x5.5
Accuracy ±3%
0.20
220 (216)
Model
(Body Size x Width)
RSP8Nx8
RSP8Nx10
RSP19Nx8
RSP19Nx10
RSP19Nx13
RSP38Nx10
RSP38Nx12
RSP38Nx13
RSP38Nx14
RSP38Nx16
RSP38Nx17
RSP67Nx14
RSP67Nx16
RSP67Nx17
RSP67Nx18
RSP67Nx19
RSP120Nx17
RSP120Nx18
RSP120Nx19
RSP120Nx21
RSP120Nx22
RSP160Nx19
RSP160Nx21
RSP160Nx22
RSP160Nx24
RSP220Nx22
RSP220Nx24
RSP220Nx27
RSP310Nx24
RSP310Nx27
RSP310Nx30
255 (250)
250 (245)
35x8
255 (250)
8-38
80-380
0.35
38x8
41x8
43x8
45x8
24x12
25x20
24x15
270 (265)
250 (245)
320
45x10
13-67
325
130-670
0.5
46x11
50x11
24-120
240-1200
335
45x11
390
51x11
395
53x15
56x15
400
52x13
30-160
45-220
300-1600
450-2200
330
52x11
54x11
57x11
56x13
0.75
0.95
445
455
60x15
580
90-420
130-560
650-3100
63x15
65x15
67x15
72x15
60x16
62x16
66x16
585
[kg]
1.4
590
640
645
72x16
81x15
86x15
665
900-4200
78x18
840
1300-5600
81x19
83x19
87x19
97x19
104x19
1000
1005
1010
1.6
3.3
995
4.0
4.5
Torque Range
Head Dimension
[N·m]
[mm]
Min.-Max. Min.-Max.
2-7.2
20-72
15x6
2-9.0
20-90
17.5x7
4-14.1
40-141
15x6
4-12.2
40-122
17.5x7
4-21
40-210
22x7
9-24.2
90-242
17.5x7
20.5x8
90-295
9-29.5
21.5x8
23.5x9
9-42
90-420
26x9
27.5x9
25x10
140-590
14-59
27x10
29x12
14-73
140-730
29.5x12
30x12
29.5x12
250-1000
25-100
30.5x12
32x13
25-127
250-1270
35x13
35.5x13
33x13
35x13
320-1700
32-170
35x15.5
39x15.5
38.5x13
48-230
480-2300
40x13
45x13
68-255
680-2550
42x15
45x15
680-3200
68-320
50x15
Overall
Length
[mm]
200
205
230
1.4
Weight
[kg]
0.15
0.2
235
275
0.35
280
350
0.45
420
0.8
470
0.90
475
615
1.35
620
680
1.60
685
1. The value shown in ( ) in the “Overall Length” shows the length of SPMH models.
2. Due to a variety of SP/RSP models, please specify required inner
width, model name and set torque when you order.
(Ex. RSP38Nx10 x 16N·m)
Note
SP(-MH)/RSP Optional Accessories
440
70x15
65-310
450-2200
Weight
580
65x15
45-220
Overall
Length
[mm]
Accuracy ±3%
215 (211)
250 (245)
31x8
Torque Range
Head Dimension
[N·m]
[mm]
Min.-Max. Min.-Max.
Part #
Tool #
Applicable Model
311
312
313
315
A-2
A-3
A-4
A-6
2N-19N
38N, 67N
120N-310N
420N, 560N
SP-H
Torque Wrench for
Piping Work
Direction
NEW
Assembly
Preset
Open End Spanner
• Made with smaller outside width to work in narrow spaces, including hydraulic
piping, where current open-end type is unable to access.
• Aligned with appropriate inner widths commonly used for hydraulic piping
applications.
Accuracy ±3%
Torque Range
[kgf·cm]
[N·m]
Min.-Max.
Min.-Max.
Model
SP38Nx19H
(Body Size x Width)
Mimimum
Head Dimension
Piping Pitch (O.W. x Thickness)
[mm]
[mm]
Overall
Length
[mm]
Weight
[kg]
SP38Nx14H
SP38Nx19H
8-25
8-39
80-250
80-390
26
35
26.3x8
33.1x8
248
249
SP67Nx27H
13-67
130-670
46
43.6x11
321
0.5
SP120Nx32H
24-120
240-1200
54
51.6x15
392
0.75
0.35
1. Confirm the minimum piping pitch before you order.
(Ex. SP38Nx14H x 25N·m)
Note
SP-N/SP-N-MH
Direction
Notched Head Type
Preset Torque Wrench
Part #
Tool #
Applicable Model
312
313
A-3
A-4
38N, 67N
120N
Assembly
Preset
Notched Head
• Notch creates speed in tightening process.
• Ideal for brake lines
Accuracy ±3%
Torque Range
[kgf·cm]
[N·m]
SP19N-1x10N
NEW
Torque Wrench for
Assembly
SP-N
SP19N-1x10N
SP-N-MH
SP19N-1x10N-MH
SP19N-3x10N
SP19N-4x10N
SP19N-3x10N-MH
SP19N-4x10N-MH
SP19N-5x10N
SP19N-9x10N
SP19N-5x10N-MH
SP19N-9x10N-MH
SP38Nx14N
SP38Nx14N-MH
Min.-Max.
Min.-Max.
3.5-19
35-190
8-38
Head Dimension
O.W. x Thickness
Head Shape
[mm]
24x12
80-380
24x15
24x10
A
24x15
24.5x10
B
35x8
A
Overall
Length
[mm]
Weight
[kg]
215 (211)
0.2
253.5 (248.5)
0.35
(Ex. SP19N-1x10N x 15N·m)
Note
SP19N-1x10N-MH
SPLS-N/SPLS-N-MH
• SP-N style with Limit Switch output
Accuracy ±3%
+HDG6KDSH$
SP-N
SPLS19N-1x10N
SPLS19N-3x10N
SPLS19N-4x10N
SPLS19N-5x10N
SPLS19N-8x10N
SPLS19N-9x10N
SP-N-MH
SPLS19N-1x10N-MH
SPLS19N-3x10N-MH
SPLS19N-4x10N-MH
SPLS19N-5x10N-MH
SPLS19N-8x10N-MH
SPLS19N-9x10N-MH
Torque Range
[N·m]
[kgf·cm]
Min.-Max. Min.-Max.
3.5-19
35-190
Head Dimension
O.W. x Thickness
[mm]
24x12
24x15
24x10
24x15
24x12
24.5x10
Head Shape
Overall
Length
[mm]
Weight
[kg]
A
215 (211)
0.2
B
A
SPLS19N-8x10N has a long cord.
Note
+HDG6KDSH%
Part #
Tool #
Applicable Model
311
312
A-2
A-3
19N
38N
CNA-4mk2
* Sold separately
19
CTA2
Digital Torque and
Angle Wrench
Direction
Assembly
Digital
Signal
Interchangeable
Re-Chargeable
• Snug and angle setting functions
• Buzzer/Light alerts to snug torque and angle completion
• Angle mode is automatic once sung torque is achieved.
Accuracy ±1%
CTA100N2x15D
Torque Range
[N·m]
S.I. Model
Min.-Max.
Grad.
(2.5) 10-50
0.05
CTA100N2x15D (5) 20-100
0.1
CTA50N2x12D
-
-
Metric
Model
0.2
CTA360N2x22D (18) 72-360
0.4
CTA500N2x22D (25) 100-500
CTA850N2x32D (43) 170-850
0.5
Min.-Max. Grad.
kgf·cm
kgf·cm
CTA50N2x12D-M (25) 100-500
CTA100N2x15D-M (50) 200-1000
-
CTA200N2x19D (10) 40-200
Torque Range
[kgf·cm/kgf·m]
-
kgf·m
Torque Wrench for
Assembly
0.5
1
lbf·ft
(3.8) 15-75
lbf·ft
0.1
2
4
CTA200N2x19D-F (7.6) 30-150
CTA360N2x22D-F (13) 52-260
0.2
0.4
0.05 CTA500N2x22D-F (18) 72-360
0.1 CTA850N2x32D-F (31) 124-620
0.5
1
0-999°
kgf·m
(2.5) 10-50
(4.3) 17-85
1°
±2°+1digit
(Angular
velocity
is 30°/s 180°/s
when the
bolt turned
to 90°)
282
384
0.58
0.63
384
0.63
475
713
0.78
1.13
949
1387
4.00
5.14
1. The value shown in ( ) shows the lowest snug torque. Accuracy cannot be guaranteed for snug torque
set beyond the operative torque range.
3. PH (Pipe wrench head) type interchangeable head cannot be used with this model.
Note
CTA2 Optional Accessories
CTA50N2x12D-I (25) 100-450
CTA100N2x15D-I (50) 200-900
CTA100N2x15D-F
CTA200N2x19D-M (100) 400-2000
CTA360N2x22D-M (180) 720-3600
CTA500N2x22D-M
CTA850N2x32D-M
Min.-Max.
lbf·in
Angle Measuring
Range
Overall
Angle
Weight
Length
Accuracy
[mm] [kg]
Grad. Min.-Max. Grad.
lbf·in
-
-
CTA500N2x22D
1
0.5
1
Torque Range
[lbf·in/lbf·ft]
American
Model
Standard Accessories Battery pack (BP-5), QH interchangeable head, Quick battery charger (BP-3-100/BP-3-200), Application
PC software
Battery Pack (P.39)
Model
BP-5
Quick Battery Charger (P.39)
Model
BC-3-100
Voltage
100V
BC-3-200
200-240V
Printer (P.57)
Model
EPP16M2
Part #
379
Applicable Model
CTA2 ➝ EPP16M2
575
584
CTA2 ➝ PC (D-SUB 9PIN FEMALE)
CTA2 ➝ PC (USB A)
1. ( ) shows pin shape of the
connecting cable.
2. Consult Tohnichi for other types of
connecting cables.
Note
WQL
Analog Torque and
Angle Wrench
Direction
Parameter Setting Display
Measured Data Display
CTA2 Common Specifications
Data Memory
Measurement Mode
999 data (Tightening torque, 1st angle value, 2nd angle value, 3rd angle value and final torque value)
Single spindle/Production mode
Data Output
Zero Adjustment
RS232C compliant
Auto zero (Angle, Torque)
Power
Continuouse Use
Ni-MH rechargeable battery
Approx. 20 hours with fully charged (8 hours by 1 hour recharging)
Recharging Time
Temperature in Use
Approx. 3.5 hours
0-40 Celsius no condensation
Other Functions
Snug torque, Tightening torque, Max. tightening torque, 1st, 2nd, 3rd angle, 1st, 2nd, 3rd max. angle,
Number of bolts, Auto reset, Judgement, Setting through PC, Battery indicator
Assembly
Dial Indicating
Ratchet Head
Graduation
Angle Direct Reading
• Includes built-in protractor with flexible arm
• Specialized version of QL
Accuracy ±3%
S.I. Model
Torque Range
[N·m]
Min.-Max. Grad.
WQL50N
WQL100N4
20
Metric
Model
(5) 10-50
0.5
450WQL3
WQL100N4
WQL200N4
(10) 20-100
(30) 40-200
1
900WQL4
1800WQL4
WQL280N
WQL420N
(30) 40-280
(40) 60-420
Note
2
2800WQL3
4200WQL2
Torque Range
[kgf·cm/kgf·m]
Square Overall Angle
Scale
Drive Length
Min.-Max. Grad.
Min.-Max. Grad. [mm] [mm] Max. Grad.
kgf·cm
kgf·cm
lbf·in
lbf·in
(50) 100-500 0.5 450WQL3-A (40) 100-400
5
9.5
260
lbf·ft
lbf·ft
(100) 200-1000 1
900WQL4-A
(7) 15-75
1
345
12.7
360° 2°
(300) 400-2000 2
1800WQL4-A (20) 30-150
2
495
kgf·m
kgf·m
(3) 4-28
2800WQL3-A (20) 30-200
2
695
0.2
19.0
(4) 6-42
4200WQL2-A (30) 60-300
3
975
American
Model
Torque Range
[lbf·in/lbf·ft]
The capacity value in the ( ) are minimum setting value for snug torque, but this value is not within
guaranteed accuracy range.
Direction
PRO TORK
(Digital Tightening Torque
Wrench)
NEW
Assembly
Digital
Signal
Battery
• Highly responsive to the applied torque value with indicator display
• Equipped with bright LED lamp
• Data Memory and Torque Set Registration
“Torque Wrench Only” Models
Torque Range
[N·m]
S.I. Model
Min.-Max.
CPT50x12D
Interchangeable
Grad.
Accuracy ±3%
Torque Range
[kgf·cm]
Metric
Model
Min.-Max.
Grad.
Torque Range
[lbf·in/bf·ft]
American
Model
Min.-Max.
lbf·in
Overall
Weight
Length
[kg]
Grad. [mm]
lbf·in
CPT20x10D
CPT50x12D
4-20
10-50
0.02 CPT20x10D-M
0.05 CPT50x12D-M
40-200
100-500
0.2
0.5
CPT20x10D-I
CPT50x12D-I
36-180
100-450
CPT100x15D
20-100
0.1
200-1000
1
CPT100x15D-I
200-900
1
lbf·ft
lbf·ft
CPT100x15D-F
CPT200x19D-F
15-75
30-150
0.1
CPT280x22D-F
42-205
CPT200x19D
40-200
CPT280x22D
56-280
CPT100x15D-M
0.2
CPT200x19D-M
400-2000
CPT280x22D-M
560-2800
2
0.2
0.5
0.2
280.5
282.5
0.63
0.65
384.5
0.85
475.5
1.37
591.5
1.76
1. “Torque Wrench Only” version is provided in basic carton product box and does not include TQH Head,
Batteries, Storage Case, or Product Box.
2. "Overall Length" does not include the length of interchangeable head TQH.
3. "Weight" does not include the weight of interchangeable head TQH and batteries.
4. A variety of different head types are available and sold separately. Refer to pages 32-35.
Note
CPT100x15D
“Set” Models (including Accessories)
Standard Accessory
S.I. Model
Metric Model
American Model
Ratchet Head
Model
How to Order:
[Ex. 1] CPT100x15D-SET
* “Set” model version
(with standard accessories)
[EX. 2] CPT200x19D
* “Torque Wrench Only” version
(without standard accessories)
CPT20x10D-SET
CPT20x10D-M-SET
CPT20x10D-I-SET
TQH10D
CPT50x12D-SET
CPT50x12D-M-SET
CPT50x12D-I-SET
TQH12D
CPT100x15D-SET
CPT100x15D-M-SET
CPT100x15D-I-SET
CPT200x19D-SET
CPT280x22D-SET
CPT200x19D-M-SET
CPT280x22D-M-SET
CPT100x15D-F-SET
CPT200x19D-F-SET
CPT280x22D-F-SET
Note
TQH15D
TQH19D
TQH22D
Sq. Drive
[mm]
Battery
Storage
Case
Product
Box
AA Alkaline
Small
Small
Large
Large
9.5
12.7
19.0
Torque Wrench for
Assembly
CPT
Battery
(2pcs)
Recommendation: Use 2xAA Ni-MH batteries for longer continuous use.
CPT Common Specifications
Accuracy
Tightening Direction
±3% of indicated value
Clockwise/Counter clockwise
Display/Character Height
14 segment LCD 6 digits/7mm
7 segment LCD 4 digits/3mm
Battery Life Indicator
Number of Data Memory
4 steps
50
Torque Setting Memory
Preset Tightening mode: 10 torque values to register
Judgment Tightening mode: Up to 10 values of each Upper/Lower/Tightening direction
Basic Function
Auto power off ( 3 minutes)
Auto memory/Reset
Auto zero
Power
Over torque alarm
AA battery x 2pcs
Continuouse Use
Temperature in Use
Approx. 40 hours
0-40 Celsius below 85%RH (no condensation)
Several different tightening modes available to cater to a variety of applications.
Quick and accurate tightening while preventing errors.
Modes include:
Preset Tightening Mode, Judgment Tightening Mode, Peak/Run Modes
* Retightening/loosening torque is performed in the Peak Mode.
Preset Tightening Mode: Allows user to set the target torque with specific % of
torque allowable beyond target, then the red LED moves towards the right to
indicate the level of the applied torque. When it reaches the target torque range,
the blue LED blinks and the buzzer signals tightening completion.
Judgment Tightening Mode: Allows user to set judgment ranges for lower/upper
limit in the tightening operation. Upon tightening completion a judgment is made
as torque value is stored in the memory.
Display example 1:
Preset Tightening Mode
(Red LED shows the level of the
applied torque)
Display example 2:
Judgment Tightening Mode
(As torque is being applied prior to
completion)
Display example 3:
Judgment Tightening Mode
(The case of exceeding target torque
range)
21
Error Proofing (Pokayoke) System
Examples) QL/QLE (P.10), CL/CLE (P.11), TiQL/TiQLE (P.13), PQL (P.14), QRSP (P.14), PCL (P.15), QSP (P.16),
CSP (P.17), SP/SP-MH/RSP (P.18), SP-N/SP-N-MH (P.19), AUR (P.40), A/AC (P.42)
LS
(Wired)
QLLS100N4
Control the number of
tightening to eliminate
missed tightening
Torque Wrench for
Assembly
Wired
SPLS38Nx17
CNA-4mk2
(Count Checker)
ACLS100N
FH
(Wireless)
Wired
＋
Currently using
QLLS100N4
T-FH256MC-LS
Modified to…
QLFH100N4
Wireless
HATFH
R-FH256
Receiver
Examples) FH transmitter (P.25) mounted on torque wrench such as QL
Equipped with FH functions such as HATFH (P.40)
Marking
MPQL100N4
CMQSP-M8
22
Socket and Adapter
P.32
P.30
Visually check the bolt
marked to recognize torque
tightening completion
MPQL/MQL
Assembly
Ratchet Head
Graduation
Quick Drying Ink
• Mechanism marks bolt as torque is achieved.
• Requires special socket, marker and ink
Marking Torque
Wrench
Direction
Pre-Lock
Accuracy ±3%
Torque Range
[N·m]
S.I. Model
Min.-Max.
Grad.
10-50
0.5
MPQL50N
MPQL100N4
MPQL100N4
20-100
MPQL140N
30-140
MPQL200N4
40-200
1
Metric
Model
Torque Range
[kgf·cm/kgf·m]
Min.-Max.
kgf·cm
Grad.
kgf·cm
100-500
5
450MPQL
900MPQL4
200-1000
1400MPQL
400-1400
1800MPQL4
400-2000
kgf·m
4-28
2
MQL280N
Marked bolts
40-280
2800MQL3
American
Model
450MPQL-A
10
Torque Range
[lbf·in/lbf·ft]
Min.-Max.
lbf·in
100-400
lbf·ft
900MPQL4-A
15-75
1400MPQL-A
30-100
20 1800MPQL4-A
kgf·m
0.2 2800MQL3-A
Overall
Weight
Length
[kg]
Grad. [mm]
lbf·in
5
lbf·ft
1
0.7
274
0.95
388
1.1
443
30-130
2
1.8
500
60-300
3
2.6
467
1. Two different sizes of adapter, standard type and long type, are available. Long type is 100mm longer
than standard type.
2. Please choose a Tohnichi's original socket with width which matches your bolt size, and order it together
with the torque wrench. Standard sockets can not be used.
Note
Thrustring Tool
Socket
Components
Standard Type
Long Type
Body
Socket
1
1
1
1
Socket Adapter Standard Type
1
-
Socket Adapter Long Type
Marker Head
1
1
1
How to Order:
17
L
× MPQL100N4 − MK92 ＋ 772
Long
type
Refill ink
Marker head
Model
Width across
flats
Marker Head
Model
SOCKET 4MH-12
Part #
701
Nominal Size [mm] Applicable Model
12
SOCKET 4MH-13
SOCKET 4MH-14
702
703
13
14
SOCKET 4MH-16
704
16
SOCKET 4MH-17
705
17
SOCKET 4MH-18
SOCKET 4MH-19
706
707
18
19
SOCKET 4MH-21
708
21
SOCKET 4MH-22
SOCKET 4MH-24
709
710
22
24
SOCKET 4MH-27
711
27
SOCKET 6MH-22
SOCKET 6MH-24
720
721
22
24
SOCKET 6MH-27
SOCKET 6MH-30
722
723
27
30
MPQL50N
MPQL100N4
MPQL140N
Part #
748
ADAPTER 17S
ADAPTER 21L
749
751
ADAPTER 21S
752
CMQSP
Marking Torque
Wrench
Direction
Assembly
Color
780
781
RED
BLUE
MK52
782
-
MK92R
783
RED
MK92B
MK92
784
785
BLUE
-
1. MK92 does not connect with the socket
having 12-16mm width across flats.
2. Marker cartridge of MK52 and MK92 are
not filled the ink. Select MK52 or MK92
and Refill ink White or Yellow at the same
time.
3. MK52 types have 5mm marking
diameter. MK92 types have 9mm
marking diameter.
MQL280N
Refill Ink and Solvent
Model
MARKER INK
Part #
770
Color
RED
MPQL50N - 200N4
MARKER INK
MARKER INK
771
406
BLUE
WHITE
MQL280N
MARKER INK
SOLVENT FOR R/B
772
790
YELLOW
For Red and Blue ink
SOLVENT FOR W/Y
791
For White and Yellow ink
Applicable Model
Socket must be ordered in set with adapter.
Note
Part #
Note
MPQL200N4
Adapter
Model
ADAPTER 17L
Model
MK52R
MK52B
Torque Wrench for
Assembly
Preset
Ratchet Head
Quick Drying Ink
• Preset style marking torque wrench for hex screws
• Mechanism marks side of bolt and work piece.
Accuracy ±3%
CMQSP-M8
Marked bolt head
CMQSP Optional Accessories
Bit
Part #
724
725
726
727
Part #
792
CMQSP-M6
CMQSP-M8
CMQSP-M10
CMQSP-M12
Min.-Max.
5-25
10-50
20-100
30-140
Min.-Max.
5
6
8
10
Overall
Length
[mm]
241
241
320
380
Weight
[kg]
0.85
0.85
1.13
1.13
(Ex. CMQSP-M10 x 50N·m)
Standard Accessories 2 x Hex wrench (including 1 spare), Marker head, Marker case, Hex wrench position adjustment tool
CMQSP Adjusting Adapter
Part #
811
812
813
Description
CMQSP-M6 Adapter
CMQSP-M8 Adapter
CMQSP-M10 Adapter
814
CMQSP-M12 Adapter
Applicable Tester
DOTE20N3-G, 50N3-G, 100N3-G
DOTE200N3-G, 500N3-G
CMQSP Adjusting Pole Holder
Description
Marker Head for CMQSP
Part #
815
816
Description
White Ink
Yellow Ink
Solvent
Applicable Model
CMQSP-M6, M8 Pole Holder
CMQSP-M10, M12 Pole Holder
Applicable Tester
DOTE20N3-G, 50N3-G, 100N3-G
DOTE200N3-G, 500N3-G
A torque wrench tester and Tohnichi's Adjusting Adapter and Pole Holder are necessary for CMQSP torque
adjustment.
Note
Refill Ink and Solvent
Part #
406
772
791
Width
Across Flat
Note
Description
CMQSP-M6 Bit
CMQSP-M8 Bit
CMQSP-M10 Bit
CMQSP-M12 Bit
Marker Head
S.I. Model
Torque Range
[N·m]
CMQSP Adjusting Tool (P.38)
Part #
930
Applicable Model
CMQSP-M6, M8, M10, M12
23
Torque Wrench
with Limit Switch
QLLS100N4
Limit switch specifications
AC30V Below 1A
DC30V Below 1A
QL style with LS
Torque Wrench for
Assembly
PQL style with LS
QSP style with LS
S.I. Model
QSPMS12N4
S.I. Model
PQLLS25N
Metric Model
225PQLLS
QLLS25N
QLLS50N
225QL3LS
450QL3LS
QSPLS25N3
QSPLS50N3
PQLLS50N
PQLLS100N4
450PQLLS
900PQL4LS
QLLS100N4
900QL4LS
QSPLS100N4
PQLLS140N
1400PQLLS
QLLS140N
QLLS200N4
1400QL3LS
1800QL3LS
QSPLS140N3
QSPLS200N4
QLLS280N
QLLS420N
2800QL3LS
4200QL2LS
QSPLS280N3
QSPLS420N
PQLLS200N4
PQLLS280N
PQLLS420N
1800PQL4LS
2800PQLLS
4200PQLLS
CL style with LS
CSP style with LS
PCL style with LS
S.I. Model
CLMS12N4x8D
Metric Model
120CL4MS
S.I. Model
CSPMS12N4x8D
S.I. Model
PCLLS25Nx10D
Metric Model
225PCLLS
CLLS25Nx10D
CLLS50Nx12D
225CL3LS
450CL3LS
CSPLS25N3x10D
CSPLS50N3x12D
PCLLS50Nx10D
PCLLS50Nx12D
450PCLLS
500PCLLS
CLLS50Nx15D
500CL3LS
CSPLS50N3x15D
PCLLS100Nx15D
900PCLLS
CLLS100Nx15D
CLLS140Nx15D
900CL3LS
1400CL3LS
CSPLS100N3x15D
CSPLS140N3x15D
PCLLS140Nx15D
PCLLS200Nx19D
1400PCLLS
1800PCLLS
CLLS200Nx19D
1800CL3LS
CSPLS200N3x19D
CLLS280Nx22D
CLLS420Nx22D
2800CL3LS
4200CL2LS
CSPLS280N3x22D
CSPLS420N3x22D
TiQL style with LS
S.I. Model
TiQLLS180N
TiLQLLS180N
TiEQLLS360N
QRSP style with LS
Metric Model
1800TiQLLS
1800TiLQLLS
3600TiEQLLS
SP, SP-MH style with LS
SPLS8Nx9
SPLS8Nx10
S.I. Model
QRSPLS38Nx17
QRSPLS38Nx19
QRSPLS38Nx21
QRSPLS38Nx24
SP, SP-MH style with LS
SP
SP-MH
SPLS8Nx7
SPLS8Nxc
-
24
SPLS38Nx17
Metric Model
120QL4MS
S.I. Model
QLMS12N4
Note
• Various styles of torque wrenches with limit switch output
• Limit switch counts the number of "Clicks".
• Tool is connected to PLC or Tohnichi's Count Checker (CNA-4mk2)
• Can be upgraded into wireless output system (FH256MC)
• Ideal for torque verification assembly processes.
SP
SPLS67Nx22
SPLS67Nx24
-
RSP style with LS
Model
(Body Size x Width)
RSPLS8Nx8
RSPLS8Nx10
SPLS67Nx27
SPLS67Nx29
RSPLS19Nx8
RSPLS19Nx10
SPLS8Nx12
SPLS19Nx10
SPLS19Nx11
SPLS19Nx10-MH
SPLS19Nx11-MH
SPLS67Nx30
SPLS67Nx32
SPLS67Nx33.3
RSPLS19Nx13
RSPLS38Nx10
RSPLS38Nx12
SPLS19Nx12
SPLS19Nx13
SPLS19Nx14
SPLS19Nx17
SPLS19Nx19
SPLS19Nx21
SPLS19N-1x10
SPLS19N-2x10
SPLS19N-3x10
SPLS38Nx8
SPLS38Nx9
SPLS38Nx10
SPLS38Nx11
SPLS38Nx12
SPLS38Nx13
SPLS38Nx14
SPLS38Nx16
SPLS38Nx17
SPLS38Nx19
SPLS38Nx22
SPLS38Nx24
SPLS38Nx27
SPLS38N-1x10
SPLS38N-2x10
SPLS38N-3x10
SPLS67Nx14
SPLS67Nx16
SPLS67Nx17
SPLS67Nx18
SPLS67Nx19
SPLS67Nx21
SPLS19Nx12-MH
SPLS19Nx13-MH
SPLS19Nx14-MH
SPLS19Nx17-MH
SPLS19Nx19-MH
SPLS19Nx21-MH
SPLS19N-1x10-MH
SPLS19N-2x10-MH
SPLS19N-3x10-MH
SPLS38Nx8-MH
SPLS38Nx9-MH
SPLS38Nx10-MH
SPLS38Nx11-MH
SPLS38Nx12-MH
SPLS38Nx13-MH
SPLS38Nx14-MH
SPLS38Nx16-MH
SPLS38Nx17-MH
SPLS38Nx19-MH
SPLS38Nx22-MH
SPLS38Nx24-MH
SPLS38Nx27-MH
SPLS38N-1x10-MH
SPLS38N-2x10-MH
SPLS38N-3x10-MH
-
SPLS120Nx14
SPLS120Nx17
SPLS120Nx18
SPLS120Nx19
SPLS120Nx21
SPLS120Nx22
SPLS120Nx23
SPLS120Nx24
SPLS160Nx19
SPLS160Nx21
SPLS160Nx22
SPLS160Nx24
SPLS160Nx26
SPLS160Nx27
SPLS220Nx19
SPLS220Nx22
SPLS220Nx24
SPLS220Nx27
SPLS220Nx29
SPLS220Nx30
SPLS220Nx32
SPLS220Nx34
SPLS220Nx36
SPLS310Nx22
SPLS310Nx24
SPLS310Nx27
SPLS310Nx30
SPLS310Nx32
SPLS310Nx41
SPLS310Nx46
RSPLS38Nx13
RSPLS38Nx14
RSPLS38Nx17
RSPLS67Nx14
RSPLS67Nx17
RSPLS67Nx19
RSPLS120Nx17
RSPLS120Nx19
RSPLS120Nx22
RSPLS160Nx19
RSPLS160Nx22
RSPLS160Nx24
RSPLS220Nx22
RSPLS220Nx24
RSPLS220Nx27
RSPLS310Nx24
RSPLS310Nx27
RSPLS310Nx30
1. Refer to base model series for torque ranges and wrench specs.
2. Female connector for LS cable is sold separately. Part# WA5219K.
SP-N, SP-N-MH style with LS
SPLS-N
SPLS-N-MH
SPLS19N-1x10N
SPLS19N-1x10N-MH
SPLS19N-3x10N
SPLS19N-3x10N-MH
SPLS19N-4x10N
SPLS19N-4x10N-MH
SPLS19N-5x10N
SPLS19N-5x10N-MH
SPLS19N-8x10N
SPLS19N-8x10N-MH
SPLS19N-9x10N
SPLS19N-9x10N-MH
3. Standard curl cord can be extended to about 2m in full extension.
4. The curl cord length of SPLS19N-8x10N is about 5m in full extension.
FH256MC
Radio Frequency Torque
Wrench System
• Wireless error-proofing (Pokayoke) torque system
• FHSS technology with universal 2.4GHz frequency band
• Wrench ID transfer functions to establish bolt tightening traceability
• Easily change frequency with wireless setting box (optional)
QLFH
FH Torque Wrench Examples
SPFH FH transmitter mounted on SP
FH transmitter mounted on QL
S.I. Model
Model
QLFH25N
QLFH50N
SPFH38Nx14
SPFH38Nx27
QLFH100N4
QLFH140N
QLFH100N4
QLFH200N4
Transmitter
T-FH256MC
Model
Description
T-FH256MC
T-FH256MC-LS
Transmitter for FH256MC
Transmitter for LS type wrench
T-FH256MC-LS is a wireless transmitter module to install on LS version torque
wrenches.
Note
Receiver
All kinds of frequency groups (256 kinds) can be set in one receiver.
Model
Specification
R-FH256
Output: No-Voltage contact output (1a), RS232C
Size: W150 x D210 x H51 (mm), Weight 1.7kg
Power: AC100V-240V, 47-63Hz
R-FH256
SB-FH256
Standard Accessories Dipole antenna
Setting Box
Torque Wrench for
Assembly
All kinds of frequency groups (256 kinds) can be set in one transmitter.
Wireless setting device for FH transmitter and receiver
Model
SB-FH256
I/O-FH256
Specification
Input: RS232C, Power: DC9V
Standard Accessories Dipole antenna
Multi I/O Box
Manage 4 tightening signals from receiver and output to external device
FH-COD
Model
Applicable Model
Specification
I/O-FH256
R-FH256
Output: No-Voltage contact output (1a) x 4, Power: AC100-240V
Antenna Extension Cord
Extends antenna from R-FH256 receiver to improve communication conditions
Model
FH-COD
FH-MHD
Applicable Model
R-FH256
Specification
Cable Length: Approx. 9.5m
Magnetic Antenna Holder
Use this to fix the position of extended antenna
Model
FH-MHD
Applicable Model
R-FH256
Specification
Cable Length: Approx. 1.5m
Protective Cover
Put it on the transmitter (T-FH256MC) to protect from physical damage
Model
FH-PCV
FH-PCV
POKA Patrol
(Count Checker)
Specification
Material: Silicon resin
1. Transmission distance 10-20 meters
2. Refer to base model series for torque ranges and wrench specs.
Note
CNA-4mk2
Applicable Model
T-FH256MC/T-FH256MC-LS
• Torque tightening verification counter
• Manages signals from LS or FH torque wrenches
• Up to 4 wrenches can be controlled at one time (in succession)
Model
CNA-4mk2
Count Display
Judgment Function
Count Input
Maximum Preset Counter
Work Setting Availability
Judgement Output
Mode Exchange Setting
Electric Power Supply
Size and Weight
2digits, 7segments, LED
Domed shaped Lamp (OK/NG)
Cable terminals x 4
99
4 sets max.
OK: Green Lamp
NG: Red Lamp + buzzer (4 patterns)
OK/NG relay output (Relay output: DC30V 1A, AC125V 0.3A)
Normal mode
Multiple mode (maximum 4 torque wrenches can be connected)
AC100-240V 50/60Hz
W150mm x D210mm x H51mm, 1.5kg
CNA-4mk2
25
Tightening Data Management System
Wireless Digital Torque Wrench
Model: CEM3-BT
Ideal for managing tightening data
in cell-production or sub-assembly lines
Merit
Missed tightening can be verified and prevented by managing the tightening data. Ideal for tracing product claims, this
system can be used to track and identify the torque wrench and the actual applied torque value used in the assembly
proccess. Improve quality assurance and working efficiency by reducing tightening errors and potential costs associated with
additional checks and reworks.
Torque Wrench for
Assembly
Outline
Basic CEM3-BTS provides wireless transfer of data from the wrench to PC as it is being applied or collected. “CEM3-BTD +
Management software” adds additional duplex functionality by sending set torque value, fastener quantity, and judgments to
the wrench for various tightening applications. One digital wrench can replace several manual preset click torque wrenches
with the additional benefit of storing the actual applied torque. Managers can control the tightening information for cost
effective and reliable implementation of tightening applications.
System
Instantly send tightened torque
data back to PC
Upper/Lower limit can be set wirelessly
from PC to torque wrench.
Wireless Digital Torque Wrench
CEM3-BT
Lower Torque Limit
Upper Torque Limit
Duplex communication
Tightened Torque Value
Judgment LED
OK: Blue
NG: Red
NEW
Accuracy ±1%
Bluetooth Specification
Communication Method
Bluetooth
Radio Frequency Range
2.4GHz
Communication Distance
Approx. 10m
Continuouse Use
Approx. 8 hours
Tohnichi Head Size
Simplex Communication Duplex communication
8D
10D
12D
15D
19D
22D
32D
Note
Torque Range
[N·m]
Model
CEM10N3x8D-BTS
CEM20N3x10D-BTS
CEM50N3x12D-BTS
CEM100N3x15D-BTS
CEM200N3x19D-BTS
CEM360N3x22D-BTS
CEM500N3x22D-BTS
CEM850N3x32D-BTS
CEM10N3x8D-BTD
CEM20N3x10D-BTD
CEM50N3x12D-BTD
CEM100N3x15D-BTD
CEM200N3x19D-BTD
CEM360N3x22D-BTD
CEM500N3x22D-BTD
CEM850N3x32D-BTD
Weight
Grad.
[mm]
[kg]
2-10
4-20
10-50
20-100
40-200
72-360
100-500
170-850
0.01
0.02
0.05
0.1
0.2
0.4
0.5
1
212
214
282
384
475
713
949
1387
0.54
0.55
0.66
0.71
0.86
1.21
4.08
5.22
2. Refer to pages 34-37 for details with interchangeable heads.
3. PH (Pipe wrench head) is not applicable due to difference of effective length.
4. Bluetooth adapter (optional) is necessary if your PC is not compatible.
5. Consult Tohnichi for management software (optional) for data setting and processing.
6. CEM3-BT models have two types.
Simplex communication (BTS) : CEM3-BT ➝ Transfer measurement data to PC
Duplex communication (BTD) : Set torque and upper/lower limits in PC ➝ CEM3-BT ➝ Transfer
measurement data to PC
7. Standard CEM3 is unable to modify into CEM3-BT.
Standard Accessories Battery pack, Quick charger, QH interchangeable head
26
Overall Length
Min.-Max.
Tightening Data Management System
Wireless Data Transfer Torque Wrench
Model: FHD, FHDS
Wireless Semi-Automatic Airtork
Model: ACFHDS
Wireless transfer of actual applied torque
for complete verification of “click” wrench tightening
Outline
System
Model: CSPFHD
Model: CSPFHDS
LCD transmitter display shows data for
convenient user confirmation
Simplified small case version with extended
battery life
CSPFHD
WITH
Torque Display
CSPFHDS
Torque Wrench for
Assembly
FHD system features highly reliable FHSS transmitter mounted on a click torque wrench that captures actual applied torque
data. R-FHD256 receiver accepts signal and confirms back to wrench with “Answerback” system. Connection to PLC and PC
software allows for management of fastener count, serial number, torque id, and judgment parameters.
WITHOUT
Torque Display
Torque value
Battery indicator
Judgment LED (Blue)
ID-display
Judgment LED (Red)
Judgment LED (Blue)
Judgment LED (Red)
Duplex
communication
Duplex
communication
Wireless Semi-Automatic Airtork
Upper limit
Model: ACFHDS
Tightening torque value
Lower limit
Semi-Automatic Pneumatic version for quick rundown
and final click torque confirmation with torque data
transfer
Receiver
R-FHD256
Duplex
communication
Balance of spindle
Record
Number of spindle
ACFHDS
External device
PLC or PC
27
DB/DBE/DBR
Direction
Dial Indicating Torque
Wrench
Inspection
Dial Indicating
• Memory pointer for easy torque reading
• Ideal for torque measuring and quality check applications
Accuracy ±3%
Torque Range
[N·m]
S.I. Model
Metric
Model
Min.-Max. Grad.
DB1.5N4-S
DB12N4
Direct Reading
Torque Range
[kgf·cm/kgf·m]
Min.-Max. Grad.
kgf·cm
kgf·cm
Torque Range
[lbf·in/lbf·ft]
Overall Square
Weight
Length Drive
Min.-Max. Grad. [mm] [mm] [kg]
lbf·in
lbf·in
American
Model
0.2-1.5
0.02 15DB4-S
2-15
0.2
DB13I-2AS
0-13
0.2
DB3N4-S
0.3-3
0.05 30DB4-S
3-30
0.5
DB26I-2AS
0-26
DB6N4-S
0.6-6
0.1
60DB4-S
6-60
1
DB40I-2AS
0-40
DB12N4-S
1-12
0.2
120DB4-S
10-120
2
DB75I-2AS
0-75
1
DB25N-S
3-25
230DB3-S
30-250
DB150I-3AS
0-150
2
245
DB300I-3AS
0-300
5
320
10
400
0.5
DB100N
0.5
DB50N-S
DB100N-S
450DB3-S
-
-
10-100
1
900DB3-S
50-500
-
-
DB600I-3AS
0-600
100-1000
10
DB600I-4AS
0-600
DBE700N
lbf·ft
-
-
6.35
0.4
9.5
0.6
12.7
0.7
5
5-50
-
205
-
-
-
-
DB25F-3AS
lbf·ft
0-25
320
0.6
9.5
-
-
-
-
-
-
DB50F-3AS
0.5
0-50
Torque Wrench for
Quality Inspection
-
-
-
20-200
2
-
-
-
400
-
-
DB50F-4AS
200-2000
20
DB100F-4AS
0-100
1
500
kgf·m
kgf·m
-
-
DB175F-4AS
0-175
2
540
DB250F-6AS
0-250
0.7
12.7
DB200N-S
-
Memory Pointer
(Red needle)
DB280N-S
1800DB3-S
-
30-280
2800DB3-S
3-28
1.0
12.7
690
1.0
1.65
5
DB420N-S
40-420
5
4200DB2-S
4-42
0.5
DB350F-6AS
0-350
890
2.5
19.0
DBE560N-S
50-560
5600DBE2-S
5-56
DBE700N-S
70-700
7000DBE2-S
7-70
DBE850N-S
100-850
8500DBE2-S
10-85
DBE1000N-S
100-1000
10000DBE2-S
10-100
10
DB500F-6AS
1
DB800F-8AS
-
-
1100
4.0
0-500
10
1260
5.5
-
-
1360
6.1
0-800
1490
10
DBE1400N-S
200-1400
14000DBE2-S
20-140
20
DBE2100N-S
DB1000F-8AS
0-1000
DB1500F-8AS
0-1500
6.4
25.4
1740
8.6
2140
12.8
2
200-2100
21000DBE2-S
20-210
20
DBE2800N-S
300-2800
28000DBE2-S
DB2000F-12AS
30-280
0-2000
2380
16.8
38.1
DBR4500N-S
500-4500
DBR6000N-S
600-6000
Note
CDB-S
Direction
Interchangeable
Head Type Dial
Indicating Torque
Wrench
Inspection
50
45000DBR-S
50-450
60000DBR-S
60-600
50
1285
-
-
-
1585
24.5
44.5
25.5
Dial Indicating
Interchangeable
Direct Reading
Memory Pointer
Accuracy ±3%
Torque Range
[N·m]
0.1
0.2
Metric
Model
CDB70N4x8D-S
CDB14N4x8D-S
CDB25Nx10D-S
CDB50Nx12D-S
0.7-7
2-14
3-25
5-50
CDB100Nx15D-S
CDB200Nx19D-S
10-100
20-200
1
2
1000CDB-S
2000CDB-S
CDB300Nx22D-S
CDB420Nx22D-S
30-300
40-420
5
3000CDB-S
4200CDB-S
Note
28
0-3000
1. “Without memory pointer” models are available. Remove “-S” from the model name when ordering.
(Ex. DB100N)
2. DBR models require winch or mechanical loading device.
3. DBR Models are supplied upon request.
4. For models having over 25.4mm square drive, use with a through-hole socket.
Min.-Max. Grad.
CDB100Nx15D-S
DB3000F-12AS
• Interchangeable head version of DB
• Ideal for torque measuring and quality inspections
S.I. Model
CDB14N4x8D-S
5
0.5
70CDB4-S
140CDB4-S
250CDB-S
500CDB-S
Torque Range
[kgf·cm/kgf·m]
Torque Range
[lbf·in/lbf·ft]
Tohnichi
Overall
Weight
Head
Length
Size
Min.-Max. Grad.
Min.-Max. Grad. [mm] [kg]
kgf·cm kgf·cm
lbf·in
lbf·in
7-70
1
70CDB4-A-S
6-60
1
215
0.45
8D
20-140
2
140CDB4-A-S 20-120
2
30-250
250CDB-A-S
30-220
255
0.48
10D
5
5
50-500
500CDB-A-S
40-430
330
0.53
12D
lbf·ft
lbf·ft
100-1000 10
1000CDB-A-S
7-70
1
415
0.76
15D
200-2000 20
2000CDB-A-S 14-140
2
525
1.0
19D
kgf·m
kgf·m
3-30
3000CDB-A-S 20-220
720
1.65
0.5
5
22D
4-42
4200CDB-A-S 30-300
920
2.7
American
Model
SCDB-S
Direction
European Style
Interchangeable
Head Type
Dial Indicating
Torque Wrench
Inspection
Dial Indicating
Interchangeable
Accuracy ±3%
Torque Range
[N·m]
Min.-Max.
Grad.
[mm]
Overall
Length
[mm]
SCDB25N-9x12-S
SCDB50N-9x12-S
3-25
5-50
0.5
9x12
9x12
271
342
0.48
0.53
SCDB100N-9x12-S
10-100
1
9x12
422
0.76
SCDB200N-14x18-S
20-200
2
14x18
535
1
SCDB50N-S
Direction
Head Size
Weight
[kg]
2. Applicable to European style head. Tohnichi’s interchangeable heads are not available for this model.
Note
T-Handle Dial Indicating
Torque Wrench
Memory Pointer
• Specialized version of DB
S.I. Model
Inspection
Dial Indicating
Direct Reading
Memory Pointer
• Dual handle for increased stability
• Memory pointer for easy reading
Accuracy ±3%
S.I. Model
Torque Range
[N·m]
Min.-Max. Grad.
T90N-S
Metric
Model
Torque Range
[kgf·cm/kgf·m]
American
Model
450T-S
Min.-Max. Grad.
kgf·cm
kgf·cm
30-230
T200I-3AS
5
50-450
T2400I-3AS
1
2
900T-S
1800T-S
100-900
200-1800
70-700
100-1000
10
7000T-S
10000T-S
kgf·m
7-70
10-100
T1400N-S
T2100N-S
200-1400
200-2100
20
14000T-S
21000T-S
20-140
20-210
2
T2800N-S
T4200N-S
300-2800
400-4200
50
28000T-S
42000T-S
30-280
40-420
5
T23N-S
3-23
T45N-S
5-45
T90N-S
T180N-S
10-90
20-180
T700N-S
T1000N-S
Note
0.5
230T-S
10 T65F-4AS
20 T130F-4AS
kgf·m
7000T-A-S
1
10000T-A-S
Torque Range
[lbf·in/lbf·ft]
Overall Neck Square
Weight
Length Length Drive
Min.-Max. Grad. [mm] [mm] [mm] [kg]
lbf·in
lbf·in
20-200
2
205
71
0.41
9.5
50-400
5
261
82
0.53
lbf·ft
lbf·ft
10-65
20-130
1
2
376
656
50-500
50-700
5
1300
1630
19.0
4
4.8
1880
2500
25.4
6.2
10
14000T-A-S
21000T-A-S
100-1000
200-1500
28000T-A-S
42000T-A-S
200-2000
400-3000
10
20
50
2960
3660
102.5
118.5
12.7
38.1
0.8
1.2
Torque Wrench for
Quality Inspection
T-S
Direct Reading
15.5
21.5
1. T700N-S to T4200N-S models are supplied upon request.
29
SF/F/FR
Beam Type
Torque
Wrench
Direction
Inspection
Torque Range
[cN·m/N·m]
S.I. Model
SF40CN
SF70CN
SF1.5N
SF3N
SF6N
SF12N
F23N
F46N
SF6N
Torque Wrench for
Quality Inspection
F92N
Beam
Min.-Max. Grad.
cN·m
cN·m
8-40
2
10-70
N·m
N·m
0.2-1.5
0.05
0.5-3
0.1
0.6-6
0.2
2-12
0.5
3-23
5-46
1
F92N
F130N
F190N
10-92
20-130
30-190
F280N
F420N
50-280
70-420
F560N
F700N
100-560
100-700
F850N
F1000N
FR1050N
FR1400N
FR2100N
FR2800N
FR4200N
FR6000N
100-850
100-1000
100-1050
200-1400
300-2100
300-2800
400-4200
600-6000
Direction
2
Metric
Model
4SF
7SF
15SF
30SF
60SF
120SF
230F
460F
920F
1300F
1900F
5
Interchangeable
Head Type Beam
Type Torque
Wrench
Inspection
10
20
50
100
5600F
7000F
8500F
10000F
10500FR
14000FR
21000FR
28000FR
42000FR
60000FR
Beam
Torque Range
[N·m]
CSF7Nx8D
CSF14Nx8D
CF25Nx10D
CF50Nx12D
Min.-Max.
N·m
1-7
2-14
5-25
10-50
CF100Nx15D
CF150Nx19D
10-100
20-150
CF230Nx22D
CF420Nx22D
CF850Nx32D
30-230
70-420
100-850
Grad.
N·m
0.2
0.5
1
Metric
Model
70CSF
140CSF
250CF
500CF
1000CF
1500CF
5
Direction
Ratchet Head
Beam Type
Torque Wrench
Inspection
10
20
Beam
Torque Range
[N·m]
Min.-Max.
Grad.
QF60N
6-60
1
QF120N
QF220N
QF320N
QF420N
QF560N
QF700N
10-120
30-220
40-320
70-420
100-560
100-700
QF850N
QFR1050N
QFR1400N
QFR2100N
QFR2800N
QFR4200N
QFR6000N
100-850
100-1050
200-1400
300-2100
300-2800
400-4200
600-6000
Note
30
15SF-A
30SF-A
60SF-A
120SF-A
230F-A
460F-A
5
10
920F-A
1300F-A
1900F-A
0-13
0-26
0-50
0-100
0-200
0-400
lbf·ft
10-66
10-95
25-135
2800F-A
4200F-A
30-200
30-300
5600F-A
7000F-A
50-400
50-500
0.5
1
2
5
10
lbf·ft
2
5
145
175
205
235
295
355
400
445
490
6.35
9.5
12.7
565
825
0.07
0.09
0.2
0.25
0.4
0.6
0.95
1.2
1.5
2.2
3.5
19.0
8500F-A
10000F-A
10500FR-A
14000FR-A
21000FR-A
28000FR-A
42000FR-A
60000FR-A
10
60-600
70-700
100-750
100-1000
200-1500
200-2000
300-3000
400-4300
20
50
945
1175
4.0
6.0
1410
1640
835
981
1148
1292
1460
1624
7.8
8.8
8
11.5
14.5
20
28
30
25.4
38.1
Direct Reading
2300CF
4200CF
8500CF
Torque Range
[kgf·cm/kgf·m]
Min.-Max. Grad.
kgf·cm
kgf·cm
10-70
2
20-140
5
50-250
10
100-500
20
100-1000
200-1500
50
kgf·m
kgf·m
3-23
0.5
7-42
1
42-85
2
Accuracy ±3%
American
Model
Torque Range
[lbf·in/lbf·ft]
1000CF-A
1500CF-A
Min.-Max.
lbf·in
10-60
20-120
40-220
80-420
lbf·ft
6-70
15-110
2300CF-A
4200CF-A
8500CF-A
20-160
30-300
60-600
70CSF-A
140CSF-A
250CF-A
500CF-A
Overall Tohnichi
Weight
Length Head
Size
[kg]
Grad. [mm]
lbf·in
2
220
0.2
8D
5
250
0.25
10
320
10D
0.4
20
380
12D
0.6
lbf·ft
2
435
15D
1.0
480
19D
1.3
5
530
725
1260
20
Ratchet Head
22D
32D
1.6
3.1
7.1
Direct Reading
• Fixed ratchet head flat beam style
• Ideal for working in narrow spaces
S.I. Model
QF120N
0.5
1
2
Note
QF/QFR
Overall Square
Weight
Length Drive
Min.-Max. Grad. [mm] [mm] [kg]
lbf·in
lbf·in
0-3.4
115
0.04
0.2
0-6
135
0.05
4SF-A
7SF-A
100-920
20
200-1300
300-1900
50
kgf·m
kgf·m
5-28
0.5
7-42
1
kgf·cm
kgf·cm
1000-5600
100
1000-7000
kgf·m
kgf·m
10-85
10-100
2
10-105
20-140
30-210
5
30-280
40-420
10
60-600
Interchangeable
2
CF25Nx10D
Min.-Max. Grad.
kgf·cm
kgf·cm
0.8-4
0.2
1-7
2-15
5-30
6-60
20-120
30-230
50-460
Accuracy ±3%
Torque Range
[lbf·in/lbf·ft]
American
Model
• Interchangeable head version of SF/F
• For measuring and tightening applications
S.I. Model
CSF7Nx8D
2800F
4200F
Torque Range
[kgf·cm/kgf·m]
1. FR models are supplied upon request.
2. FR models require winch or mechanical loading device.
Note
CSF/CF
Direct Reading
• Direct reading torque wrench with scale plate
• For measuring and tightening applications
2
5
10
20
50
100
Metric
Model
600QF
1200QF
2200QF
3200QF
4200QF
5600QF
7000QF
8500QF
10500QFR
14000QFR
21000QFR
28000QFR
42000QFR
60000QFR
Accuracy ±3%
Torque Range
[kgf·cm/kgf·m]
Min.-Max.
kgf·cm
6-60
20-120
30-230
50-460
100-920
200-1300
300-1900
kgf·m
10-85
10-105
20-140
30-210
30-280
40-420
60-600
American
Model
Grad.
kgf·cm
2
600QF-A
5
10
20
50
kgf·m
2
5
10
Torque Range
[lbf·in/lbf·ft]
1200QF-A
2200QF-A
3200QF-A
4200QF-A
5600QF-A
7000QF-A
Min.-Max.
lbf·in
0-520
lbf·ft
6-86
5-160
40-230
30-300
50-400
50-500
8500QF-A
10500QFR-A
14000QFR-A
21000QFR-A
28000QFR-A
42000QFR-A
60000QFR-A
60-600
100-750
100-1000
200-1500
200-2000
300-3000
400-4300
Square Overall
Weight
Drive Length
[kg]
Grad. [mm] [mm]
lbf·in
10
455
9.5
0.8
lbf·ft
2
515
1.2
12.7
580
1.8
5
655
2.6
825
3.4
19.0
950
4.3
10
1170
6.5
20
50
1. QFR models are supplied upon request.
2. QFR models require winch or mechanical loading device.
1400
845
992
1158
1305
1473
1624
25.4
38.1
8.5
8.5
12.5
15.5
21
30
32
Direction
Inspection
Digital
Interchangeable
Torque Range
[N·m]
Metric
Model
Min.-Max. Grad.
Basic Functions
Peak Hold, Auto memory & resetting, Tightening
completion buzzer, Judgment of measured data,
Auto zero setting, Auto off (3 minutes), Clock
Note
2. For interchangeable heads, refer to pages 32-35.
3. For infrared data transfer, use with R-DT999. (Refer to page 56)
4. For USB data transfer, use with No. 584 connecting cable (Optional).
Standard Accessories
1. Battery Pack (BP-5)
2. QH Interchangeable Head (Refer to page 34)
3. Quick Battery Charger (BC-3-100/BC-3-200)
Handy Terminal
HT-10
Compact data collection device for CEM3
• Upload & download torque
measuring information
• Guides user through torque assembly &
quality inspection processes
• Statistics and charting capabilities
CTB
Digital Retightening
Torque Wrench
Direction
CTBE500x22D
Common Specifications
Data Memory
Arithmatic Function
Measurement Mode
Data Out Put
Zero Adjustment
Other Function
Powr Source
Continuous Use
Battery Charge
Operating Condition
50 data
Sampling, Maximum, Minimum, Means
Peak/Run
RS232C I/F, Infrared ray
Auto zero fuction (C key)
Auto power off (after 20 min.), Battery checker, Auto reset
Ni-Cd battery
8 hours
1 hour
0-40 Celsius
Accuracy ±1%
Torque Range
[lbf·in/lbf·ft]
Tohnichi
Overall
Weight
Head
Length
Size
[kg]
American
Model
Min.-Max. Grad.
CEM10N3x8D
N·m
0.01 CEM10N3x8D-M
kgf·cm
20-100
CEM20N3x10D
4-20
0.02 CEM20N3x10D-M
40-200
0.2
CEM20N3x10D-I
CEM50N3x12D
10-50
0.05 CEM50N3x12D-M 100-500
CEM100N3x15D
20-100
0.1
-
-
-
CEM200N3x19D
CEM360N3x22D
40-200
72-360
0.2
0.4
CEM200N3x19D-M 400-2000
CEM360N3x22D-M 720-3600
CEM500N3x22D 100-500
CEM850N3x32D 170-850
0.5
1
CEM500N3x22D-M
CEM850N3x32D-M
CEM100N3x15D-M 200-1000
-
-
kgf·m
10-50
17-85
lbf·in
20-90
lbf·in
0.1
212
0.46
8D
36-180
0.2
214
0.47
10D
0.5
CEM50N3x12D-I 100-450
0.5
282
0.58
12D
1
CEM100N3x15D-I 200-900
1
0.63
15D
CEM100N3x15D-F
lbf·ft
0.1
384
2
4
CEM200N3x19D-F 30-150
CEM360N3x22D-F 52-260
0.2
0.4
475
713
0.78
1.13
19D
kgf·m
0.05 CEM500N3x22D-F 72-360
0.1 CEM850N3x32D-F 124-620
0.5
1
949
1387
4.00
5.14
kgf·cm
0.1 CEM10N3x8D-I
lbf·ft
15-75
22D
32D
CEM3-P
• Programmable version of CEM3 with data management software that links
work name with test results
Torque Accuracy
Portion Registration Memory
Measurement Data Storage
±1%
Max. 100 parts (Part name, number of screws, tightening direction, high/low torque, measuring
order)
Up to 3,000 screw data (vary depending on parts registered), measurement part name, measured
value, pass/fail judgment, measurement time and date)
Model
CEM10N3x8D-P
CEM20N3x10D-P
CEM50N3x12D-P
Model
CEM100N3x15D-P
Model
CEM500N3x22D-P
CEM200N3x19D-P
CEM360N3x22D-P
CEM850N3x32D-P
Battery Pack (P.39)
Model
BP-5
Part #
379
575
584
Quick Battery Charger (P.39)
Model
BC-3-100
Description
100V
BC-3-100
200-240V
Applicable Model
CEM2, CEM3, R-DT999 ➝ EPP16M2
CEM2, CEM3, R-DT999 ➝ PC (D-sub 9 Pin Female)
CEM3, R-DT999 ➝ PC (USB A type)
Model
DFS
Printer (P.57)
Media
CD-ROM
Model
EPP16M2
Inspection
Digital
Interchangeable
Signal
Re-Chargeable
• Detects movement of fastener for more accurate testing
• Software converts measured torque to initial tightening torque value.
S.I. Model
CTB100x15D
Torque Range
[kgf·cm/kgf·m]
N·m
2-10
Common Specifications
7 segments LED 4 lines 10mm (Torque value)
14 segments LCD 3 lines 7mm (Counter)
7 segments LCD 4 lines 3mm (Clock)
Display
Battery life indicator (4 steps)
Judgment LED RED/BLUE
Number of Data Memory 999 (M-2 mode: 99 data)
RS232C (2400-19200bps)
Communication
Functions
Serial output corresponding to a USB connecter
Power Supply
Ni-MH rechargeable battery
Approx. 20 hrs with fully charged ( 8 hours by 1 hour recharging )
Continuous Use
Recharging Time
Approx. 3.5 hours
Operation Tempareture 0-40 Celsius no condensation
Re-Chargeable
• Dual LED & LCD displays for optimal viewing
• 999 memory storage capacity
• For inspection and tightening
S.I. Model
CEM100N3×15D
Direct Reading
Torque Wrench for
Quality Inspection
CEM3
DATA TORK (Digital
Torque Wrench)
Torque Range
[N·m]
Metric
Model
Torque Range
[kgf·cm/kgf·m]
Accuracy ±1%
Torque Range
[lbf·in/lbf·ft]
CTB20x10D
CTB50x12D
CTB100x15D
Min.-Max.
N·m
4-20
10-50
20-100
Grad.
N·m
0.02
0.05
0.1
Min.-Max. Grad.
kgf·cm kgf·cm
CTB20x10D-M
40-200
0.2
CTB50x12D-M
100-500
0.5
CTB100N3x15D-M 200-1000
1
CTB200x19D
CTB360x22D
40-200
72-360
0.2
0.4
CTB200x19D-M
CTB360x22D-M
CTBE500x22D 100-500
CTBE850x32D 170-850
0.5
1
CTBE500x22D-M
CTBE850x32D-M
400-2000
2
720-3600
4
kgf·m
kgf·m
10-50
0.05
17-85
0.1
Tohnichi
Overall
American
Weight
Head
Length
Model
Size
[kg]
[mm]
Min.-Max. Grad.
lbf·in
lbf·in
CTB20x10D-I
36-180 0.2
295
0.6
10D
CTB50x12D-I
100-450 0.5
360
0.7
12D
CTB100x15D-I
200-900
1
0.8
15D
lbf·ft
lbf·ft 433
CTB100x15D-F
15-75
0.1
CTB200x19D-F
30-150 0.2
500
1.1
19D
CTB360x22D-F
52-260 0.4
743
1.6
22D
CTBE500x22D-F 72-360 0.5
912
3.5
CTBE850x32D-F 124-620
1
1383
4.9
32D
2. For interchangeable heads, refer to pages 32-35.
3. For infrared data transfer, use with R-DT999. (Refer to page 56)
Standard Accessories 1. Quick battery charger (QC-1/QC-2)
2. QH interchangeable head (Refer to page 34)
Note
Battery Pack (P.39)
Printer (P.57)
Model
BP-3
Model
EPP16M2
Quick Battery Charger
(P.39)
Model
QC-1
QC-2
Part #
378
579
Description
100V
200-240V
Applicable Model
CTB ➝ EPP16M2
CTA, CTB ➝ PC (D-sub 9 Pin Female)
Model
DFS
Media
CD-ROM
31
SH
Open Spanner Head
W
C
1
Tohnichi
Head Size
8D
Accessories
10D
12D
15D
Model
(Body Size x Width)
SH8Dx5.5
SH8Dx6
SH8Dx7
SH8Dx8
SH8Dx10
SH8Dx11
SH8Dx12
SH8Dx13
SH8Dx14
SH8Dx16
SH8Dx17
SH8Dx19
SH8Dx21
SH8Dx22
SH8Dx24
SH10Dx7
SH10Dx8
SH10Dx10
SH10Dx11
SH10Dx12
SH10Dx13
SH10Dx14
SH10Dx16
SH10Dx17
SH10Dx18
SH10Dx19
SH10Dx21
SH10Dx22
SH10Dx24
SH12Dx8
SH12Dx10
SH12Dx11
SH12Dx12
SH12Dx13
SH12Dx14
SH12Dx16
SH12Dx17
SH12Dx18
SH12Dx19
SH12Dx21
SH12Dx22
SH12Dx24
SH12Dx27
SH15Dx12
SH15Dx13
SH15Dx14
SH15Dx16
SH15Dx17
SH15Dx18
SH15Dx19
SH15Dx21
SH15Dx22
Allowable Torque
[N·m]
[kgf·cm]
1.5
15
2.5
25
3.5
35
7
70
Outside Width
C [mm]
13
15
17
20
25
27
t
The SH type spanner heads suit for the place where sockets can not be used, for
flare nuts in piping and for work in narrow places.
Thickness
t [mm]
3
3.5
4
4.5
SH15Dx19
Tohnichi
Head Size
15D
5.5
29
14
20
140
31
32
35
36
37
38
200
6.5
19D
28
32
6.5
22.5
225
22D
39
7
11.8
20.5
70
118
205
29.5
295
59
590
70
43
20
24
28
31
32
38
5.5
40
10
41
11
5
6.5
8
27D
700
43
48
52
59
140
590
38
1400
51
Inch Size Models
13
8
32D
13
Model
(Body Size x Width)
SH15Dx24
SH15Dx26
SH15Dx27
SH15Dx30
SH15Dx32
SH15Dx36
SH19Dx17
SH19Dx18
SH19Dx19
SH19Dx21
SH19Dx22
SH19Dx24
SH19Dx27
SH19Dx30
SH19Dx32
SH19Dx34
SH19Dx36
SH19Dx41
SH22Dx19
SH22Dx22
SH22Dx24
SH22Dx27
SH22Dx30
SH22Dx32
SH22Dx34
SH22Dx36
SH22Dx41
SH22Dx46
SH22Dx50
SH22Dx55
SH27Dx22
SH27Dx24
SH27Dx27
SH27Dx30
SH27Dx32
SH27Dx34
SH27Dx36
SH27Dx41
SH27Dx46
SH27Dx50
SH32Dx27
SH32Dx30
SH32Dx32
SH32Dx34
SH32Dx36
SH32Dx41
SH32Dx46
SH32Dx50
SH32Dx55
SH32Dx60
Allowable Torque
[N·m]
[kgf·cm]
140
Outside Width
C [mm]
Thickness
t [mm]
60
12
1400
68
200
2000
180
1800
200
2000
180
1800
200
2000
180
1800
280
2800
500
5000
420
4200
500
420
5000
4200
280
2800
500
5000
255
350
490
670
750
670
2550
3500
4900
6700
7500
6700
750
7500
850
8500
1200
12000
54
13
60
15
76
11
63
78
15
85
103
108
65
72
82
88
92
90
94
98
100
103
14
15
16
19
20
21
22
24
26
105
18
110
24
120
29
NEW
Commonly used in the airline industry and for specific American product installation and maintenance.
Tohnichi
Head Size
10D
12D
15D
32
Model
(Body Size x Inner Width [in])
SH10Dx1/4
SH10Dx5/16
SH10Dx3/8
SH10Dx7/16
SH10Dx1/2
SH10Dx9/16
SH12Dx3/8
SH12Dx7/16
SH12Dx1/2
SH12Dx9/16
SH12Dx5/8
SH12Dx11/16
SH15Dx1/2
SH15Dx9/16
SH15Dx5/8
SH15Dx11/16
SH15Dx3/4
SH15Dx13/16
Inner Width
[mm]
6.35
7.94
9.53
11.11
12.7
14.29
9.53
11.11
12.7
14.29
15.88
17.46
12.7
14.29
15.88
17.46
19.05
20.64
Allowable Torque
[N·m]
[lbf·in]
20
177
25
221
12
20.5
29.5
106
181
261
Outside Width C
[mm]
[in]
28
1.10
32
1.26
39
24
31
32
1.54
0.94
1.22
1.26
Thickness t
[mm]
[in]
6.5
0.26
5
0.20
6.5
0.26
59
522
40
1.57
10
0.39
70
620
59
522
41
38
1.61
1.50
11
8
0.43
0.31
140
1239
51
2.01
13
0.51
➝
The Relationship between Interchangeable Heads and Torque Wrenches
Nominal diameter
CL100Nx15D
➝
➝
Nominal diameter
SH15Dx17
Ring Head
C
W
RH
➝
Tohnichi’s interchangeable head wrenches have specific diameter round
ends that fit into corresponding head base openings. Head and wrench
model names include the diameter sizes so heads can be matched to
wrenches that will accept those heads.
For example: SH15Dx17 will fit on CL100Nx15D
A variety of different head types (SH, RH, QH, RQH, FH, DH, AH and SP-N)
can be used on one wrench or different types of wrenches such as CL (for
tightening) and CEM3 (for inspection) can use the same head that has the
corresponding diameter size.
1
t
The RH type ring heads guarantee the safe work as the axes of bolt and RH ring
head are always aligned and prevent the heads will drop.
RH15Dx17
Tohnichi
Head Size
Model
(Body Size x Width)
RH8Dx5.5
RH8Dx6
RH8Dx7
RH8Dx8
RH8Dx10
RH8Dx11
RH8Dx12
RH8Dx13
RH10Dx8
RH10Dx10
RH10Dx11
RH10Dx12
RH10Dx13
RH10Dx14
RH10Dx16
RH10Dx17
RH10Dx18
RH10Dx19
RH10Dx21
RH10Dx22
RH12Dx8
RH12Dx10
RH12Dx11
RH12Dx12
RH12Dx13
RH12Dx14
RH12Dx16
RH12Dx17
RH12Dx18
RH12Dx19
RH12Dx21
RH12Dx22
RH15Dx12
RH15Dx13
RH15Dx14
RH15Dx16
RH15Dx17
RH15Dx18
RH15Dx19
RH15Dx21
RH15Dx22
RH15Dx24
RH15Dx27
RH15Dx30
8D
10D
12D
15D
Allowable Torque
[N·m]
[kgf·cm]
1.5
15
2.4
24
3.6
36
7.2
72
12.2
122
14
140
7.2
12.2
20
72
122
200
25
250
7.2
12.2
20
72
122
200
29.5
295
59
590
70
700
29.5
295
59
590
100
1000
Outside Width
C [mm]
10.5
11
12
13.5
15.5
17
18
19
12.5
15.5
17
18
19
20
22
24
25
26
28
29
15
16
18
20
21
20
24
25
26
29
30
19
20.5
22
25
26
27
28
Tohnichi
Head Size
Thickness
t [mm]
5
6
7
19D
6
7
8
22D
5
5.5
6.5
10
27D
12
13
7
8
10
32D
31
140
1400
34
37
41
Inch Size Models
13
Model
(Body Size x Width)
RH19Dx14
RH19Dx17
RH19Dx18
RH19Dx19
RH19Dx21
RH19Dx22
RH19Dx24
RH19Dx27
RH19Dx30
RH19Dx32
RH19Dx34
RH19Dx36
RH19Dx41
RH22Dx19
RH22Dx22
RH22Dx24
RH22Dx27
RH22Dx30
RH22Dx32
RH22Dx34
RH22Dx36
RH22Dx41
RH22Dx46
RH27Dx22
RH27Dx24
RH27Dx27
RH27Dx30
RH27Dx32
RH27Dx34
RH27Dx36
RH27Dx41
RH27Dx46
RH27Dx50
RH32Dx27
RH32Dx30
RH32Dx32
RH32Dx34
RH32Dx36
RH32Dx41
RH32Dx46
RH32Dx50
RH32Dx55
RH32Dx60
Allowable Torque
[N·m]
[kgf·cm]
59
590
100
1000
166
1660
200
2000
166
1660
255
2550
490
4900
500
5000
255
350
490
670
750
670
2550
3500
4900
6700
7500
6700
750
7500
490
670
4900
6700
860
8600
1200
12000
Outside Width
C [mm]
22.5
27
28
29
Thickness
t [mm]
8
10
11
32
13
35
39
41
44
47
49
55
30
34
37
41
44
45
49
51
57
62
15
14
15
17
14
15
16
19
38
42
46
48
51
52
58
64
69
43
46.5
49
52
53
59
65
69
75
80
Accessories
Note: RH8Dx5.5 to RH8Dx7 are hex shape.
20
21
22
24
26
16
18
24
27
29
NEW
Commonly used in the airline industry and for specific American product installation and maintenance.
Tohnichi
Head Size
10D
12D
15D
Model
(Body Size x Inner Width [in])
RH10Dx1/4
RH10Dx5/16
RH10Dx3/8
RH10Dx7/16
RH10Dx1/2
RH10Dx9/16
RH12Dx3/8
RH12Dx7/16
RH12Dx1/2
RH12Dx9/16
RH12Dx5/8
RH15Dx1/2
RH15Dx9/16
RH15Dx5/8
RH15Dx11/16
RH15Dx3/4
Allowable Torque
[N·m]
[lbf·in]
7.2
64
12.2
108
25
221
12.2
20
29.5
108
177
261
59
522
29.5
261
59
522
100
140
885
1239
Outside Width C
[mm]
[in]
11
0.43
12.5
0.49
15.5
0.61
17
0.67
19
0.75
20
0.79
16
0.63
18
0.71
21
0.83
20
0.79
24
0.94
20.5
0.81
22
0.87
25
0.98
27
1.06
28
1.10
Thickness t
[mm]
[in]
6
0.24
7
0.28
8
0.31
5
5.5
6.5
0.20
0.22
0.26
10
0.39
7
0.28
8
0.31
10
13
0.39
0.51
33
➝
The Relationship between Interchangeable Heads and Torque Wrenches
Nominal diameter
QH
DH
➝
Nominal diameter
SH15Dx17
Square Drive Head
C
C
C
C
C
CL100Nx15D
➝
Ratchet Head
➝
Tohnichi’s interchangeable head wrenches have specific diameter round
ends that fit into corresponding head base openings. Head and wrench
model names include the diameter sizes so heads can be matched to
wrenches that will accept those heads.
For example: SH15Dx17 will fit on CL100Nx15D
A variety of different head types (SH, RH, QH, RQH, FH, DH, AH and SP-N)
can be used on one wrench or different types of wrenches such as CL (for
tightening) and CEM3 (for inspection) can use the same head that has the
corresponding diameter size.
ℓ1
ℓ1
1
ℓ1
Model
8D
10D
12D
15D
19D
22D
27D
32D
QH8D
QH10D
QH12D
QH15D
QH19D
QH22D
QH27D
QH32D
Sq. Drive
a [mm]
6.35
9.53
12.7
19.05
25.4
Dimensions
Outside Width
h
c [mm]
[mm]
23
17.5
26
22
32
25.6
37.5
33.5
40
38.4
51
46.5
70
49.7
74
55.7
h
b
[mm]
7.5
11
14
15.4
21.5
26.5
For the model having 25.4mm square drive, use a through-hole socket.
Note
RQH
DH15D
b
b
As the QH type ratchet heads need only small swing for tightening, they suit for
operations in narrow spaces.
Tohnichi
Head Size
b
QH15D
a
h
h
b
h
ℓ1
H
□a
□H
The DH square drive heads are the standard interchangeable head. They are useful
when tightening a large number of matching screws with a common torque wrench.
It is recommended to keep one set. They are used with sockets.
Tohnichi
Head Size
Model
10D
12D
15D
19D
22D
27D
32D
DH10D
DH12D
DH15D
DH19D
DH22D
DH27D
DH32D
HH
12.7
19.05
25.4
19D
22D
23.5
30.25
m
m
H
HH hex-head is for
hexagon socket
head bolts. A hex
key can be inserted.
t
h
15D
16.5
HH10Dx6
RQH15Dx17
Ѯ
ФD
'
12D
13
Hex Head
ℓ1
Tohnichi
Head Size
b
[mm]
C
c
w
W
Accessories
ℓ1
1
As the RQH type ratchet heads need only small swing for tightening, they suit for
operations in narrow and low ceiling spaces.
Model
(Body Size x Width)
RQH12Dx12
RQH12Dx14
RQH15Dx14
RQH15Dx17
RQH19Dx17
RQH19Dx19
RQH19Dx22
RQH22Dx22
RQH22Dx24
D
[mm]
Dimensions
Outside Width
H
C [mm]
[mm]
20.5
32
24.1
24.5
37.5
29
31
45
28
35.2
51
35
h
[mm]
Hex key (Sold separately)
The HH hex-head is for hex. socket head cap screws.
Tohnichi
Head Size
Model
(Body Size x Width)
8D
HH8D
HH10Dx5
HH10Dx6
HH10Dx8
HH12Dx5
HH12Dx6
HH12Dx8
HH12Dx10
HH15Dx8
HH15Dx10
HH15Dx12
HH15Dx14
HH19Dx10
HH19Dx12
HH19Dx14
HH19Dx17
HH19Dx19
HH22Dx12
HH22Dx14
HH22Dx17
HH22Dx19
HH22Dx22
10D
10
12D
15D
19D
22D
Outside Width
C [mm]
12
11
12
15
11
14
15
17
14
17
20
21.5
17
21.5
23
27
29
19.5
27
30
32
35
Dimensions
t
m
[mm]
[mm]
14.5
-
φd2
b [mm]
-
8
19
HH8D
Bits are sold separately.
Refer to page 36.
7
10
21
13
8.5
23
17
26
1. To be used with hex. key inserted.
2. HH8D is not used with hex. key but interchangeable bit.
Note
34
9.53
Dimensions
Outside Width
h
c [mm]
[mm]
22.5
18
23
22
29.5
24
34
43.3
42
44.5
50
58.5
ѮG
Фd2
CC
W
Female Ratchet Head
Sq. Drive
a [mm]
10
AH
SH-N
Adjustable Open End Head
Open End Head with Notch
IN
WM
0LQ HU
LQQ WK
ZLG
W
C
Ｃ
W
TD U:LGWK
ＷS GDUGLQQH
6WDQ MAX idth
W ner W
. in
Max Ｓ
Ｓ’
11
1
ｈ
ｔ
AH15Dx24
SH-N models
6+1VHULHV
(except for SH10D-5x10N)
H[FOXGLQJ6+'[1
1
1
H
Marked model name and
applicable max. torque
t
W
C
Ｃ
W
h
t
H
H
Ｌ
t
h
t
H
AH is easy and convenient to use for applications that require different size bolt heads.
Available currently only for the 15mm diameter root shaped Tohnichi torque wrenches.
SH10D-1x10N
6+'[1
6+1VHULHV
SH10D-5x10N
Dimensions
Inner Width
6+'[1
H[FOXGLQJ6+'[1
S
S'
L
t
h
Min.-Standard-Max.
The notch creates speed in the tightening process by grasping the side of the
[mm]
[mm] [mm] [mm] [mm] [mm]
[N·m] [kgf·cm]
fastener without removing the wrench. Ideal for brake line assembly.
AH15Dx24
50
500
10-14-24
46
54
80.2
10
30.5
15D
AH15Dx30
100
1000
13-22-30
57
66
86.3
12
32
Dimensions
Tohnichi
Allowable Torque
Model
AH15Dx36
140
1400
13-24-36
67
78
88.4 13.5 33.75
Outside Width
Thickness
Head
(Body Size x Width)
Size
[N·m]
[kgf·cm] C [mm] H [mm] t [ mm] h [mm]
Use with a click type torque wrench (for tightening).
Note
SH10D-1x10N
18.75
12
6
22.5
225
SH10D-3x10N
20.25
7.5
15
SH10D-5x10N
19
190
24
24.5
10D
Recommendable
SH10D-4x10N
17.75
5
Model
22.5
225
10
Torque Wrench
SH10D-9x10N
18.75
6
SH10Dx12N
25
250
32
16
6.5
3.25
AH15Dx24
CL50Nx15D
AH15Dx30
CL100Nx15D
AH15Dx36
CL140Nx15D
Model
(Body Size
x Width)
PH
Allowable
Torque
Common Dimensions for Interchangeable Head
Pipe Wrench Head
Dimensions [mm]
Model
PH15Dx350
The PH heads suit for use with pipes and plumbing applications.
15D
19D
Model
(Body Size x
Width)
Pipe Wrench Head Applicable Pipe
Diameter
Max. Length
[mm]
[mm]
PH15Dx350
PH19Dx350
PH22Dx350
PH22Dx450
PH32Dx450
22D
32D
Standard Pipe
Diameter
[mm]
350
13-38
25.5
450
26-52
39
Recommendable
Torque Wrench
SH8D, RH, QH, HH
SH10D, RH, QH, HH, DH, SH-N
SH12D, RH, QH, HH, DH, RQH
SH15D, RH, QH, HH, DH, RQH, FH
SH19D, RH, QH, HH, DH, RQH, FH
SH22D, RH QH, HH, DH, RQH, FH
SH27D, RH, QH, DH
SH32D, RH, QH, DH
1
°
Hook Head
L2
6
b
L2
3
φD
0°
d3
8
10
12
15
19
22
27
32
d4
3.0
3.5
3.5
4.5
4.5
5.5
6.5
6.5
W
9
12
14
17
21
24
30
35
φd
r
60
4
2
2.5
3
3
3
3.5
5
7
2
φ d4
d3
FH
3
10
12
14
17
21
24
29
34
CSP
1. When ordering with CSP, please specify PH model name and
required set torque.
2. In case of using graduated torque wrench, order PHL models.
Note
2
4
5
6
7.5
9.5
11
13.5
16
W
Tohnichi
Head Size
1
35
44
53
63
80
100
125
160
Accessories
Tohnichi
Head
Size
φd
4
b
φD
r
ℓ1
Note
ℓ1
t
H
t
H
FH
When requesting special heads that will be used with torque
wrenches that have an external scale or digital display, you must
strictly follow the "L1" dimension in order to keep torque values
accurate. Any deviation from the "L1" dimension will affect the
torque.
The FH hook heads are ideal for use with bearing locknut applications.
Tohnichi
Head
Size
15D
19D
22D
Model
(Body Size
x Width)
FH15Dx30
FH15Dx38
FH15Dx45
FH15Dx52
FH15Dx58
FH19Dx65
FH22Dx75
FH22Dx85
Applicable Size
Nominal Size
r
Θ'
of Nut Outside
of Screw
Diameter [mm]
[mm] [mm]
30-38
M20
16
38-45
M25
20
45-52
M30
24
52-58
M35
27 60
58-65
M40
31
65-75
M45, M50 35.5
75-85
M60, M65 39
85-98
M70, M75 45.5 45
b
[mm]
Dimensions
t
H
D
[mm] [mm] [mm]
3
6
30
3.5
7
30.5
4.5
5
8
10
31
35.5
38.5
40
L2
[mm]
25
7.5
29
9.5
32
11
d
[mm]
4.5
5.5
35
Interchangeable Bit
From Torque Tool
＋ Plus Bit
◯
Applicable Torque
Screwdriver
-
RTD/RTDZ
BMRD
BMLD
FTD50CN - 400CN
FTD2CN-S - 400CN2-S
Applicable Power Torque Tool
U30CN
U (except U30CN)
-
-
Root Shape Sign
A
B
D
E
Tohnichi
Original Bit
Tohnichi
Original Bit
Tohnichi
Original Bit
70
－ Minus Bit
◯
Box Bit
FTD8N2-S FTD16N2-S,
(FTD8N - 16N)
C
AMRD
AMLD
MTD
(02FTD 2FTD)
LTD2000CN
-
-
-
AUR5N
F
G
H
Tohnichi
Original Bit
Common
(Standard)
35
700
Hex Bit
Square Bit
Root Shape and Dimensions
Hexalobular Bit
Size
Screw
Tohnichi
Original Bit
0
#0 (S-0)
See Table A
104
1
#1 (H-1)
See Table A
85
106
84
2
3
#2 (H-2)
#3 (H-3)
See Table A
See Table A
86
87
107
80
81
4
10
#4 (H-4)
0.15 x 1
See Table A
11
0.2 x 1.5
112
12
0.3 x 2
113
13
0.4 x 2.4
14
15
0.6 x 3.8
0.7 x 7
16
17
0.9 x 7
1 x 10
18
1 x 12
19
20
1.2 x 17
1.6 x 10
21
1.2 x 8
Sign
Plus
＋
◯
Minus
－
◯
From Bolt
109
115
116
36
111
105
108
71
88
89
37
38
39
82
83
Box
Hex Bolt
W 5.5
W6
5.5
6
M3
(M3.5)
91
95
W7
W8
7
8
M4
(M4.5) M5
92
93
W 10
10
94
W 1.27
1.27
M6
Set Screw
M2.5
W 1.5
W2
1.5
2
M2.5
M3
M4
57
58
W 2.5
W3
2.5
3
M3
M4
M5
M6
59
60
W4
W5
W6
4
5
6
M5
M6
M8
M8
M10
M12 (M14)
61
62
63
W8
2
8
□ 6.35
M10
(1/4)
M16 (M18)
64
90
□ 9.53
Flat Head
M2
(3/8)
Socket Head
Hex
Accessories
Common
(Standard)
Cap Screw
Square
Drive
3
Hexalobular
T5
T6
T7
T8
33
34
Set Screw
M2.5
M2
M2.5
56
470
M3
M3.5
M4
M2.5
471
472
d
Bolt Head Shape (Ref.)
M2.5
M3
(M3.5)
M4
(M4.5)
M5
M6
(M7)
M8
M10
M12
(M14)
M16
(M18)
M20
(M22)
M24
(M27)
M30
(M33)
M36
(M39)
M42
4.5
5.5
6
7
8
8
10
11
13
JIS
36
Small Hex Head High Strength Hex Bolt Hex Socket Head
Bolt (B)
for Friction Grip Joint (B) Cap Screw (B)
Hex Socket Set
Screw (B)
22
27
32
36
41
46
50
-
2
2.5
3
4
5
6
8
10
12
1.27
1.5
2
2.5
3
4
5
14
8
36
41
46
50
55
60
65
12
14
17
19
22
24
27
30
32
36
41
46
50
55
-
32
10
-
JIS B 1180
JIS B 1180
JIS B 1186
JIS B 1176
JIS B 1177
16
18
21
17
19
22
24
27
30
32
34
17
19
22
24
27
6
How to order:
Indicate–the–model–name–and–catalog–No.
Hex Bolt
(EXAMPLE)　MODEL–NAME　CATALOG–No.
d
B
+ BIT–– A–-– 0　–104
○
（Width across flats）
Root–Shape–Sign
Point–Shape–Sign
Cap Screw
d
d
＋ Size of Bits
◯
B （Width across flats ）
No. of Cross Nominal
Size of Screw
Hole No.
Remark
M1.6, M2
[M2], (M2.2), M2.5, (M3)
M3, (M3.5), M4, (M4.5), M5
M6
M8, M10
#0 (S-0)
#1 (H-1)
#2 (H-2)
#3 (H-3)
#4 (H-4)
Pan head screw, Flat head screw,
Pan flat screw, Bind screw
[(M3) #1 is bind small screw only]
[(M2) #1 is not compliant with ISO]
Set Screw
d
B （Width across flats）
Flat Head Screw
Nominal Size (a)
ISO Screws
Non-ISO Screws
b
Hex head Bolt
(B)
a
Nominal Size of
Screw (d)
B（Width across flats）
M1 M1.2 (M1.4) M1.6 (M1.7) M2 (M2.2M) M2.3 M2.5 (M2.6) M3 (M3.5) M4 (M4.5) M5 M6 M8 M10
0.4
0.5
0.6
0.8 1 1.2
1.2 1.6 2 2.5
0.32
0.4
0.6
0.8
1
1.2
1.6
Ѯ '
Ｌ
Interchangeable Socket
,QOHW)(0$/(D
,QOHW0$/(D
SOCKET FOR HAND TOOL
SOCKET FOR HAND TOOL
From Torque Tool
202
210
12
13
203
204
211
212
14
213
220
16
17
216
214
227
221
18
217
228
19
215
222
21
22
229
223
Ѯ '
10
Ｌ
,QOHWD
:LGWKDFURVVIODWV%
SOCKET
Ｌ
How to Order (Hand
Tools)
SOCKET
Indicate
Ｌ model name and Part #
237
230
24
224
231
27
30
225
226
232
233
32
234
34
236
36
235
[Ex.] SOCKET 2H-10　:LGWKDFURVVIODWV%
Socket InIet sign
Purpose sign
Part,QOHWD
#
Width across flats
ADAPTER
IndicateＬmodel name and Part #
Part #
Inlet Sign (Female)
Purpose sign
InIet sign (Male)
,QOHW0$/(D
,QOHW)(0$/( D
ADAPTER FOR HAND TOOL
From Torque Tool
Ѯ '
273
272
ADAPTER
275
274
SOCKET FOR PNEUMATIC TOOL
Ｌ
8P
14
16
253
255
260
264
17
18
19
254
261
265
262
:LGWKDFURVVIODWV%
,QOHWD
Ѯ '
How to Order
Ｌ (Air Tools)
SOCKET
Ｌ
Indicate model name and Part #
[Ex.] SOCKET 3P-10　,QOHW0$/(D
,QOHW0$/(
Socket
InIetD
sign
:LGWKDFURVVIODWV%
Purpose sign
303
304
305
306
307
308
309
Ｌ
Ѯ '
25.4
8P
Ｌ
295
,QOHW0$/(D
Ѯ '
ADAPTER
Ｌ
,QOHW)(0$/( D
SOCKET FOR POWER AND HAND TOOL
,QOHW0$/(D
450
451
452
453
454
:LGWKDFURVVIODWV%
460
461
462
Ѯ '
Ｌ
Ѯ '
19.0
6C
:LGWKDFURVVIODWV%
,QOHWD
Ｌ
,QOHW)(0$/(D
,QOHWD
,QOHWD
Ｌ
Note
:LGWKDFURVVIODWV%
O-ring and pin are not included.
Ѯ '
440
441
442
443
12.7
4C
SOCKET FOR
HEX HEAD
CAP SCREWS
:LGWKDFURVVIODWV%
Ｌ
Ѯ '
9.5
3C
,QOHWD
:LGWKDFURVVIODWV%
From Torque Tool
,QOHW)(0$/(D
,QOHW )(0$/(D
Ｌ
294
6.35
2C
430
431
432
InIet sign (Male)
ADAPTER FOR PNEUMATIC TOOL
293
292
290
Part #
Inlet Sign (Female)
Purpose sign
,QOHWD
:LGWKDFURVVIODWV%
,QOHW0$/(D ,QOHW 0$/(D
19.0
6P
290
,QOHWDflats
Width across
Ｌ ADAPTER 3P-4　[Ex.]
Ｌ
SOCKET
From Torque Tool
12.7
4P
291
250
,QOHW)(0$/( D
#
)(0$/(
D
,QOHWPart
ADAPTER
Indicate model name and Part #
ADAPTER FOR PNEUMATIC TOOL
Inlet Drive (Female)
Width Across Flats (B)
2.5
3
4
5
6
8
10
12
14
17
19
,QOHWD
Ｌ
266
263
9.5
3P
,QOHWD
:LGWKDFURVVIODWV%
32
34
36
41
46
50
55
Square Drive (Male)
9.5
(3)
12.7
(4)
19
(6)
25.4
(8)
:LGWKDFURVVIODWV%
Ѯ '
251
252
Ѯ '
12
13
Ѯ '
3P
250
Ѯ '
10
ＬＬ
Ѯ '
4P
9.5
Ѯ '
25.4
Ѯ '
From Torque Tool
12.7
Accessories
SOCKET FOR PNEUMATIC TOOL
21
22
,QOHW)(0$/(D
,QOHW0$/(D
276
Ѯ '
(6)
(8)
270
Ѯ '
19
25.4
Ｌ
271
Ѯ '
(3)
(4)
ADAPTER FOR HAND TOOL
19.0
6H
Ѯ '
9.5
12.7
12.7
4H
Ѯ '
(2)
9.5
3H
ѮѮ
'
'
'
6.3
6.35
2H
Ѯ '
To Socket
Square Size (Male)
From Bolt
270
Ѯ '
[Ex.] ADAPTER 2H-3　50
55
From Bolt
202
,QOHWD
:LGWKDFURVVIODWV%
41
46
From Bolt
Ѯ '
201
19.0
6H
Ѯ '
8
12.7
4H
Ѯ '
9.5
3H
Ѯ '
6.35
2H
From Bolt
,QOHWD
37
Auxiliary Equipment
To facilitate effective and convenient use of Tohnichi products, a
number of auxiliary parts and special tools are available (Some torque
tools are provided with the necessary auxiliary parts). We are ready to
manufacture custom-made parts and tools to meet your requirements.
Special Tools for Torque Wrench
QLE
Special Tools for Torque Screwdriver
LTD, RTD
ADJUSTING TOOL FOR QLE
This tool is used to set the torque of the large QLE adjustable wrenches.
Part #
ADJUSTING TOOL FOR LTD/RTD
This tool is used to adjust the torque of LTD and RTD torque screwdrivers.
Applicable Model
QLE550N-QLE2100N
DQLE550N-DQLE1000N
301
CLE550N-CLE1200N
TiEQLE750N-TiEQLE1400N
PHLE850N, PHLE1300N
SP
THRUSTRING TOOL FOR SP
This tool is used to set the torque of preset types SP, RSP, QSP and
CSP torque wrenches.
Part #
Tool #
310
A-1
311
A-2
LTD
A-3
313
A-4
314
315
A-5
A-6
QSP/CSP1.5N-QSP/CSP6N
SP2N-SP19N, QSP/CSP12N,
Accessories
47
LTD/RTD260CN
48
LTD/RTD500CN
49
1046
LTD/RTD1000CN
LTD/RTD120CN
Part #
Applicable Model
31
LTD/RTD/NTD/RNTD500CN
FTD400CN
QSP/CSP25N, BQSP/BCSP25N
QSP/CSP140N, BQSP/BCSP50NBQSP/BCSP140N
SP120N-SP310N, QSP200N-QSP280N
BQSP200N, BQSP/BCSP280N
QSP/CSP420N, BQSP/BCSP420N
SP420N, SP560N
Part #
Dimensions
[mm]
Applicable Model
931
2.5 x 1.5 x 6
QSP/CSP25N3, QSP1.5N4-12N4
BQSP/BCSP25N3, CSP1.5N4-CSP12N4
930
4 x 2.5 x 8
QSP/CSP50N3-QSP/CSP280N3
BQSP100N4, BQSP200N4
QSP100N4, QSP200N4
BQSP/BCSP50N3-BQSP/BCSP280N3
LTD/NTD1000CN
32
FTD8N, FTD16N
LTD2000CN
40
LTD, RTD
PRESET HOOK SPANNER FOR LTD/RTD
This tool makes it easier to set the torque for mid. to large capacity LTD
and RTD screwdrivers.
NTD, RNTD
Part #
52
Applicable Model
LTD/RTD260CN
53
54
LTD/RTD500CN
LTD1000CN
55
LTD2000CN
ADJUSTING BAR FOR NTD/RNTD
This tool is used to set the torque of preset types NTD and RNTD
screwdrivers.
Part #
42
TOOL SET FOR DB
This set of pliers is used to adjust the torque for dial type torque
wrenches and torque checkers.
Part #
316
LTD/RTD15CN, LTD/RTD30CN
LTD/RTD60CN
This tool makes tightening with large LTD much easier.
Applicable Model
QSP3 ADJUSTING TOOLS FOR QSP3
DB
Applicable Model
51
46
TIGHTENING TOOL FOR LTD
SP38N, SP67N, QSP/CSP50N312
Part #
Applicable Model
DB, DBE, CDB-S, T-S, DOT
Applicable Model
NTD/RNTD15CN-NTD/RNTD120CN
43
44
NTD/RNTD260CN
NTD/RNTD500CN-NTD/RNTD1000CN
TORQUE SCREWDRIVER ADAPTER
This accessory is used with TME2 and TM torque meters to test
UNITORK and torque screwdirvers.
CARRYING CASE
Part #
One piece of torque wrench and sockets can be packed.
Applicable Model
LTD/RTD/NTD/RNTD
FTD50CN-FTD400CN
30
Lubricant for reparing torque products：EVERTORQUE
Model
EVERTORQUE
Part #
830
840
Part #
840
38
Dimensions [mm]
H91 x W429 x D120
Weight [kg]
0.5
842
H60 x W400 x D70
0.25
843
H80 x W520 x D80
0.36
Applicable Model
QL100N4-QL140N
PQL100N4-PQL140N
MTQL70N, MTQL140N
DB25N-DB100N
Approx. 5pcs of Socket (under W19)
QL50N, QL50N-MH
CL50Nx12D, CL50Nx15D
CL50Nx12D-MH, CL50Nx15D-MH
MTQL40N-MTQL70N, CL100N-MH
PQL50N, QL100N4-MH
QL200N4, QL200N4-MH, DQL200N4
Applicable Models and Parts
Applicable Model
QL, QLE, CL, CLE,
PQL, PCL, YCL etc.
Click Type Torque
Wrench
WQL
MPQL
Click Type Torque
Screwdriver
RTD, RNTD
RTD, LTD, BMLD
Applicable Part
Thrustring; Steel Ball
Scale Piece, Adjusting Screw; Thread
Screw Knob, Protecter; Joint
Ratchet, Marker Pipe; Joint
Main Shaft, Toggle Sheet; Serration
Case, Adjusting Piece; Thread
Connecting Cable
※* The cable length is 2m.
EPP16M2 Printer Connecting Cable
Part #
Applicable Model
Figure
378
CTB (P.31)
379
CEM3/CEM3-P (P.31), CTA2 (P.20), R-DT999 (P.56)
380
TCC (P.47), CD42 (P.56)
382
DOTE3-G (P.46), LC2-G (P.48), TDT2-G (P.49), TME2 (P.50)
PC Connecting Cable
Applicable Model
Figure
Plug
561
TCC (P.47), CD42 (P.56)
D-SUB 9 Pin Female
575
D-SUB 9 Pin Female
579
CTB (P.31)
D-SUB 9 Pin Female
584
USB A type
383
DOTE3-G (P.46), LC2-G (P.48), TDT2-G (P.49), TME2 (P.50)
D-SUB 9 Pin Female
384
ST2 (P.48), BTGE (P.49)
USB A type
Accessories
Part #
Quick Charger, Battery Pack, AC Adapter
Quick Charger
Battery Pack
Model
Applicable Model
BC-3-100
BC-3-200
Figure
Model
Applicable Model
CEM3/CEM3-P (P.31), CTA2 (P.20) (100-120V)
CEM3/CEM3-P (P.31), CTA2 (P.20) (200-240V)
BP-3
CTB (P.31)
BC-4
ST2 (P.48)
BP-5
CEM3/CEM3-P (P.31)
CTA2 (P.20)
QC-1
QC-2
CTB (100-130V) (P.31)
CTB (200-240V) (P.31)
BP-100
DOTE3-G (P.46), LC2-G (P.48),
TDT2-G (P.49), TME2 (P.50), CD42 (P.56)
Model
Applicable Model
BA-4
TME2 (P.50)
Figure
AC Adapter
Model
Applicable Model
BA-3
DOTE3-G (P.46), LC2-G (P.48), TDT2-G (P.49)
Figure
Figure
39
AUR
UNITORK (Pistol Type
Pneumatic Torque
Screwdriver)
Direction
Assembly
Pistol
Pneumatic
Graduation
Trigger
• High speed and high accuracy tightening
• Easy torque adjustment by scale with key
S.I. Model
AUR5N
AUR12.5N
AUR25N
Torque Range
[N·m]
Metric
Model
Min.-Max.
2-5
Grad.
0.1
AU50R
5-12.5
0.25
10-25
0.5
Torque Range
[kgf·cm]
Min.-Max.
20-50
Grad.
1
AU125R
50-125
2.5
AU250R
100-250
5
American
Model
AU50R-A
Accuracy ±5%
Torque Range
[lbf·in]
Min.-Max.
15-45
AU125R-A 37.5-112.5
AU250R-A
75-225
Grad.
1
Free
Air
Hose in Standard
Weight
Speed Pressure Dia. Accessory
[r.p.m] [MPa] [mm]
Bit +
[kg]
2100
#3
1.5
2.5
800
5
400
0.5
φ10
-
1.7
1. AUR5N has #3 bit (6.35 HEX) with a double bit. Any other bits are available in the local market.
2. AUR12.5N and AUR25N have a fixed 9.53mm square drive. Use pneumatic sockets only.
Note
Standard Accessories 1. Torque adjusting key
2. Supportive Handle (for AUR(LS) 25N)
3. W12 Open ended spanner (for AUR(LS) 25N)
AURLS
• AUR style with limit switch output
AUR12.5N
Accuracy ±5%
S.I. Model
Torque Range
[N·m]
Metric
Model
Min.-Max.
Grad.
AURLS5N
2-5
0.1
AU50RLS
AURLS12.5N
AURLS25N
5-12.5
10-25
0.25
0.5
AU125RLS
AU250RLS
Torque Range
[kgf·cm]
Min.-Max.
Grad.
20-50
1
50-125
100-250
2.5
5
American
Model
Torque Range
[lbf·in]
Min.-Max.
AU50R-A
15-45
AU125R-A 37.5-112.5
AU250R-A 75-225
Grad.
1
2.5
5
Free
Air
Hose in Standard
Weight
Speed Pressure Dia. Accessory
[r.p.m] [MPa] [mm]
Bit +
[kg]
2100
800
400
0.5
φ10
#3
-
1.5
1.7
CNA-4mk2
* Sold Separately
HAT
Direction
HANDYTORK
(Battery Operated
Torque Screwdriver)
Assembly
Pistol
Graduation
Re-Chargeable
Trigger
• Easy calibration check with standard torque wrench tester
• Available with reverse and as FH version
Power Torque Tools
Accuracy ±5%
HAT
Torque Range
[N·m]
S.I. Model
HATR
Free Speed
Voltage
Square Drive
Weight
Min.-Max.
Grad.
[r.p.m.]
DC [V]
[mm]
[kg]
10-25
0.5
700
140
12
9.5
1.8
HAT25N
HATR25N
1. Torque accuracy is based upon static torque measured by torque wrench tester.
2. HATR/HATRFH has a reverse mode function.
3. HATFH/HATRFH is error-proofing (Pokayoke) type, and it can be used only with R-FH256 receiver (sold
separately) as count verification system.
4. Use pneumatic sockets only.
5. HAT battery and battery charger are optional.
Note
Standard Accessories 1. W4 hex key
2. Supportive handle (for HAT25N, HATR25N, HATFH25N, HATRFH25N)
HATFH
• Wireless error-proofing (Pokayoke) version of HAT
• Tightening completion signal output to eliminate missed tightening
HAT25N
Accuracy ±5%
S.I. Model
HAT Optional Accessories
BP-12
Battery
Model
BP-12
Battery Charger
Part #
820
40
HATFH25N
HATRFH25N
Description
DC 12V
Torque Range
[N·m]
Free Speed
Voltage
Square Drive
Weight
Min.-Max.
Grad.
[r.p.m.]
DC [V]
[mm]
[kg]
10-25
0.5
700
140
12
9.5
1.8
CNA-4mk2
BC-1
Model
BC-1 (AC100V)
* Sold Separately
U/UR
UNITORK (Straight &
Pistol Type Pneumatic
Torque Screwdriver)
Direction
Assembly
Pneumatic
Graduation
Trigger/Lever
• Accurate and stable tightening for small size screws
• Lever activated
Accuracy ±5%
S.I. Model
U
Straight/Pistol
Torque Range
[cN·m]
Min.-Max. Grad.
cN·m
cN·m
UR
Min.-Max. Grad.
kgf·cm kgf·cm
American
Model
U30CN
10-30
0.5
U3
1-3
0.05
U3-A
U60CN
U120CN
20-60
40-120
1
2
U6
U12
2-6
4-12
0.1
0.2
U6-A
U12-A
U250CN
U500CN
U1000CN
100-250
200-500
400-1000
5
U25
U50-2
U100
10-25
20-50
40-100
0.5
U25-A
U50-2-A
U100-A
2
5
U12LR
U25LR
4-12
10-25
0.2
0.5
U12LR-A
U25LR-A
10
U50R
20-50
1.0
U50R-A
ULR120CN 40-120
ULR250CN 100-250
UR500CN 200-500
U120CN
Metric
Model
Torque Range
[kgf·cm]
Note
10
1.0
Torque Range
[lbf·in]
Min.-Max. Grad.
lbf·in
lbf·in
Free
Air
Hose in
Standard
Weight
Speed Pressure Dia.
Accessory
[r.p.m] [MPa] [mm]
[kg]
Bit +
1-3
2-5
0.05
0.1
1600
1700
4-10
8-22
0.2
0.5
1400
1200
950
15-45
30-90
4-10
1.0
0.2
700
1300
8-22
0.5
1000
15-45
1.0
950
0.4
0.5
φ5
0.32
0.42
0.6
0.5
φ6
0.48
0.75
1.35
0.6
0.5
φ5
2.0
0.56
0.6
φ6
0.95
1.45
#0
#1
#2
#3
#2
#3
1. U1000CN has a fixed square drive (9.53mm). Use socket bits or bit holders for this model.
2. U500CN, 1000CN, and UR500N are pistol type with trigger mechanism.
3. Standard bits available in the local market can be used.
Standard Accessories 1. One Touch Joint #130 (For U30CN-U250CN, ULR120CN and ULR250CN)
2. Bit holder (For U1000CN only)
U/UR Optional Accessories
One Touch Joint (Female)
Joint to connect UNITORK to air hoses
Part #
Applicable Model
Size
130
PF 1/4 Female
131
132
U30CN-U250CN
PF 1/4 Male
φ8 Hose Joint
Hand Cover
For hand slip protection
Part #
150
Applicable Model
U30CN-U120CN
151
U250CN
Torque-fix
Part #
145
Applicable Model
U30CN-U120CN
146
147
U250CN
U500CN, UR500CN
Tool Kit
Tools for disassembly/assembly for UNITORK
Part #
160
161
162
163
Applicable Model
U30CN-U250CN
U250CN
U500CN, UR500CN
U1000CN
Power Torque Tools
For torque adjustment
41
A/AC
Semi-Automatic Airtork
Assembly
Angle
Pneumatic
Graduation
Push button
• Pneumatic motor mounted on torque wrench
• After provisional tightening by an air motor at high speed, final torque set is
performed manually.
• A: Low provisional torque type, AC: High provisional torque type
Direction
Accuracy ±3%
Torque Range
[N·m]
S.I. Model
Metric
Model
Min.-Max. Grad.
A100N Low provisional type
A180N Low provisional type
Torque Range
[kgf·cm]
Min.-Max. Grad.
A10N
A25N
3-10
5-25
0.1
0.25
A100
A225
30-100
50-250
A50N
10-50
0.5
A450
100-500
5
A100N
A180N
20-100
40-180
1
2
A900
A1800
200-1000
400-1800
10
20
AC25N
5-25
0.25
A225C7
AC50N
AC100N
10-50
20-100
0.5
1
A450C7
A900C7
-
-
-
-
-
-
AC180N
40-180
2
A1800C
400-1800
20
Torque Range
[lbf·in/lbf·ft]
American
Model
Min.-Max. Grad.
lbf·in lbf·in
1 A100-A
2.5 A225-A
[N·m]
[r.p.m] [MPa]
1.8
750
2.5
5
800
11
1000
lbf·ft
17.5
900
1
2
19
800
30-90
50-200
1
2.5
A450-A
100-400
5
A900-A
A1800-A
lbf·ft
15-65
30-130
lbf·ft
1
2
lbf·in lbf·in
2.5 AC200I-3A 50-200 2.5
100-500 5 AC400I-3A 100-400 5
200-1000 10 AC750I-3A 200-800 10
AC75F-3A 15-75
AC130F-4A 30-130
[mm]
φ5
[mm]
[mm]
[kg]
256
9.5
1.0
339
489
12.7
1.5
2.6
293
9.5
1.0
1.5
0.6
50-250
lbf·ft
φ6
335
12.7
489
2.0
3.3
1. Rated voltage of the limit switch is AC/DC 30V, below 1A.
Note
AC100N High provisional type
Max.Provisional Free
Air
House Overall Square
Tightening
Weight
Speed Pressure in Dia. Length Drive
Torque
ALS/ACLS
• A/AC style with limit switch output
Accuracy ±3%
Torque Range
[N·m]
S.I. Model
Power Torque Tools
ACLS100N High provisional with limit switch type
AS
Fully-Automatic Airtork
Metric
Model
Max.Provisional Free
Tightening
Speed
Torque
Air
Pressure
[r.p.m]
[MPa]
Min.-Max.
Grad.
Min.-Max.
Grad.
ALS10N
3-10
0.1
ALS100
30-100
1
ALS25N
ALS50N
5-25
10-50
0.25
0.5
ALS225
ALS450
5-25
10-50
0.25
0.5
A225C7LS
A450C7LS
2.5
5
2.5
5
1.8
ACLS25N
ACLS50N
50-225
100-500
50-250
100-500
11
1000
ACLS100N
ACLS180N
20-100
40-180
1
2
A900C7LS
A1800CLS
200-1000
400-1800
10
20
17.5
19
900
800
Assembly
Angle
Pneumatic
[N·m]
House
in Dia.
[mm]
750
Overall
Length
[mm]
1.2
256
φ5
Graduation/Preset
Square
Weight
Drive
[mm]
[kg]
0.6
9.5
293
φ6
335
489
12.7
1.7
1.0
1.5
2.0
3.3
Lever
• Pneumatic right angle style
• Speed tightening with shut off at final torque set
• ASH: High air pressure, ASL: Low air pressure
Direction
Accuracy ±5%
S.I. Model
AS12N
ASH80N
AS optional Accessories
AS12N
ASH40N
ASH60N
ASH80N
ASH120N
ASL30N
ASL45N
ASL60N
ASL90N
Note
Torque Range
[N·m]
Min.-Max.
6-12
20-40
30-60
40-80
60-120
15-30
22.5-45
30-60
45-90
Grad.
0.2
Preset
Type
Metric
Model
A120S
A400SH
A600SH
A800SH
A1200SH
A300SL
A450SL
A600SL
A900SL
Spanner (for disassembly/assembly)
Part #
170
Applicable Model
AS
Torque Adjustment Key
Part #
140
Applicable Model
AS
Torque Range
[kgf·m]
Min.-Max.
60-120
200-400
300-600
400-800
600-1200
150-300
225-450
300-600
450-900
Free
Air
Weight
Grad. [r.p.m] [MPa]
[mm]
[mm]
[mm]
[kg]
2
1000
0.5
359
1.9
9.5
2000
477
2.6
1330
484
2.8
0.6
1000
592
12.7
3.2
Preset
640
662
4.1
φ12
Type
1700
477
9.5
2.6
1130
484
2.8
0.45
850
592
12.7
3.2
540
662
4.1
1. AS12N is Adjustable style having a graduated scale.
2. Other AS models are Preset style. Please specify the required set torque when ordering.
(Ex. ASH40N x 30N·m)
Standard Accessories 1. Torque adjustment key
2. Spanner
42
Torque Range
[kgf·cm]
AP
Assembly
Pistol
Pneumatic
Graduation
Trigger/Lever
• For large bolt tightening
• Automatic shut off at final torque set
Direction
Accuracy ±5%
Torque Range
[N·m]
S.I. Model
AP400N
AP700N
Min.-Max. Grad.
100-220
10
200-400
300-700 20
AP1200N
600-1200
AP220N
Torque Range
[kgf·m]
Free
Air
American
Model
Min.-Max. Grad.
Min.-Max. Grad. [N·m] [r.p.m] [MPa] [mm] [mm]
10-22
AP160F
80-160
5
277
1
275.5 19.0
20-40
AP300F
150-300 10 175
30-70
2
AP500F
220-500 10
79
364
0.5
25.4
φ12
60-120
5
AP900F
450-900 25
46
375.5
110-220
AP1600F 800-1600 50 19.2
508 31.75
10
200-400
AP3000F 1500-3000 100 12
541 38.1
Metric
Model
AP22
AP40
AP70
AP120
AP220
50
AP2200N 1000-2200
100
AP4000N 2000-4000
Torque Range
[Ibf·ft]
AP400
Reaction
Weight
Arm
(Sold Separately) [kg]
SA400N/UA450N
4.7
SA700N/UA900N
6.7
SA1200N/UA1800N
8.1
UA3000N
UA4500N
15
22
1. Reaction arm, such as UA or SA, must be used when operating AP models in order to absorb reaction
force.
Note
Standard Accessories W5 hex key
AP400N
Fully-Automatic Electric
Torque Wrench
Direction
Pistol
Assembly
Accuracy ±5%
DAP220N
DAP400N
Torque Range
[N·m]
Min.-Max. Grad.
100-200
10
200-400
DAP700N
300-700
DAP1200N 600-1200
DAP700N
AP/DAP Optional Accessories
Shell Arm
Light weight reaction arm
Model
Standard Socket Length
[mm]
SA400N
SA700N
SA1200N
50
62
62
Universal Arm
Heavy duty reaction arm
20
50
Metric
Model
DAP22
DAP40
DAP70
DAP120
Torque Range
[kgf·m]
Free
Overall Square
Voltage
Reaction Arm
Weight
Speed
Length Drive
Min.-Max. Grad. [r.p.m] AC [V]
[mm]
[mm]
(Sold Separately)
[kg]
10-22
314
1
AC100V
318
19.0
SA400N/UA450N
5.4
20-40
199
±10%
30-70
2
90
400
SA700N/UA900N
8.2
50/60Hz
25.4
60-120
5
53
418
SA1200N/UA1800N
9.4
1. DAP has 2 types, A-type for clockwise tightening, and B-type for clockwise tightening + reverse mode.
Torque control is available only for clockwise direction for both type.
2. Power cable is 2.5m length.
3. Reaction arm is optional.
4. Reaction arm is a must for using this model.
5. Reaction arm, such as UA or SA, must be used when operating DAP models in order to absorb reaction
force.
Note
UA
Trigger
• Electric version of AP
S.I. Model
SA
Graduation
Electric Power
W5 hex key
DECA
10:1 Ratio
Torque Multiplier
Body + Universal Arm
• Multiplied torque output by 10
• Ideal for applying high torque
values with less force
Body
Universal Arm
DECA900N
Accuracy ±5%
Model
DECA450N
DECA900N
DECA1800N
DECA3000N
DECA4500N
DECA9000N
DECA18000N
Note
Output Torque
[N·m]
[kgf·m]
[lbf·ft]
Min.-Max.
Min.-Max. Min.-Max.
90-450
9-45
65-325
180-900
18-90
130-650
360-1800
36-180
260-1300
600-3000
60-300
434-2170
900-4500
90-450
650-3250
1800-9000
180-900
1300-6500
3600-18000 360-1800 2600-13000
Torque
Ratio
10:1
Dimension [mm]
Overall
Length
Dia.
195
541
270
324
367
464
540
52
63
78
95
110
140
172
Output
Input
Sq. Drive Sq. Drive
19.0
9.5
25.4
12.7
31.75
38.1
50.8
63.5
19.0
25.4
Weight
[kg]
2
3.4
5.7
10
12.5
34
60
Power Torque Tools
DAP
AP2200N
Applicable
Universal Arm
UA450N
UA900N
UA1800N
UA3000N
UA4500N
UA9000N
UA18000N
1. Universal Arm is optional.
2. DECA900N and DECA1800N are supplied upon request.
Standard Accessories 1. Metal Case (for DECA450N-DECA900N only)
2. Portable Handle (for DECA4500N-DECA9000N only)
3. Metal Case Caster (for DECA18000N only)
Model
UA450N
UA900N
UA1800N
UA3000N
UA4500N
UA9000N
UA18000N
Weight [kg]
1.2
2.6
4
7.2
10.9
18
-
43
Multiple Unit
(Pneumatic
Straight Style)
ME/MC
Direction
Automatic
Straight
Pneumatic
Graduation
Master Valve Operation
• Several units used simultaneously with loader
• Fully automatic tightening for complex bolt configurations
Accuracy ±5%
S.I. Model
Torque Range
[N·m]
Min.-Max. Grad.
ME25N
10-25
ME45N
ME80N
20-45
35-80
ME126N
50-126
MC220N
100-220
MC400N
200-400
MC700N
300-700
0.5
1
Metric
Model
Torque Range
[kgf·cm/kgf·m]
100-250
M450E2
M800E2
200-450
350-800
M1260E2 500-1260
2
10
20
M22C
kgf·m
10-22
M40C
20-40
M70C
30-70
60-120
100-220
MC1200N 600-1200 50 M120C
MC2200N 1000-2200
M220C
100
MC4000N 2000-4000
M400C
200-400
Air House
Free
Speed Pressure in Dia.
Min.-Max. Grad. [r.p.m] [Mpa] [mm]
lbf·in
lbf·in
American
Model
Min.-Max. Grad.
kgf·cm kgf·cm
M250E2
Torque Range
[lbf·in/lbf·ft]
M250E2-A
5
90-220
M450E2-A 200-400
M800E2-A 310-700
10
20
lbf·ft
35-90
M1260E2-A
1050
5
10
lbf·ft
2
540
310
Overall
Length
[mm]
Square
Weight
Drive
[mm]
[kg]
420.6 (457.6)
0.4
φ7.5
9.5
4.7
5.3
424
12.7
(461)
200
5.7
kgf·m
M22C-A
80-160
M40C-A
150-300
2
M70C-A
220-500
20
79
5
M120C-A
M220C-A
450-900
700-1600
50
46
19.2
M400C-A
1500-3000
1
10
10
100
277
287.5
175
0.5
φ8
12
19.0
376
25.4
4.6
6.7
388
491
31.75
8.1
17
522
38.1
24
1. Overall length in ( ) is the length with TC sensor.
2. Auto-reverse/auto-reset functions.
3. For designing a multi-spindle system, please check the PCD, minimum distance between the spindles.
4. Add “–TC” for sensor-equipped version.
5. For first-time user, consult Tohnichi for assistance.
Note
Standard Accessories Torque adjusting bar
MC400N-TC
ME126N
Unit
MG/MF Multiple
(Pneumatic Straight
Direction
Style)
Automatic
Straight
Pneumatic
Graduation
• Several units used simultaneously with loader
• Fully automatic tightening for complex bolt configurations
Accuracy ±5%
S.I. Model
Torque Range
[cN·m/N·m]
Min.-Max. Grad.
MG60CN
cN·m cN·m
MG120CN 40-120
1
MG250CN 100-250 2.5
Metric
Model
M12G
M25G
Torque Range
[kgf·cm]
Air
House Overall Bit
Free
Weight
Speed Pressure in Dia. Length Holder
[kg]
Min.-Max. Grad. [r.p.m] [Mpa] [mm] [mm] [mm]
American
Model
Min.-Max. Grad.
kgf·cm
4-12
10-25
Torque Range
[lbf·in]
kgf·cm
0.1 M12G-A
0.25 M25G-A
4-10
8-22
0.2
0.5
720
350
MF6N
N·m
3-6
N·m
0.1
M60F
30-60
1
M60F-A
25-50
1
1000
MF12N
6-12
0.2
M120F
60-120
2
M120F-A
50-100
2
500
φ5
287279
0.4
φ6
411-
0.68
6.35
Hex
2.0
403
1. MG/MF is 6.35 HEX bit holder type.
2. For designing a multi-spindle system, check the PCD, minimum distance between the spindles.
Standard Accessories Torque adjusting key
Power Torque Tools
Note
MF12N
AME
Direction
Multiple Unit
(Pneumatic Right
Angle Style)
Automatic
Angle
Pneumatic
Graduation
• Ideal for automated tightening applications
Accuracy ±5%
S.I. Model
AME25N
AME35N
AME50N
AME70N
44
Min.-Max.
10-25
15-35
20-50
30-70
Grad.
0.5
1
Metric
Model
AM250E2
AM350E2
AM500E2
AM700E2
Torque Range
[kgf·cm]
Min.-Max.
100-250
150-350
200-500
300-700
Grad.
5
10
Free
Air
House
Speed Pressure in Dia.
[r.p.m]
[Mpa]
[mm]
1200
800
0.5
φ7.5
600
380
Overall
Length
[mm]
369 (407)
376 (414)
484 (522)
554 (592)
Square
Weight
Drive
[mm]
[kg]
9.5
2.6
2.7
12.7
2.9
3.6
1. Auto-reverse/auto-reset functions.
2. For designing a multi-spindle system, please check the PCD, minimum distance between the spindles.
Standard Accessories Torque adjusting bar
Note
AME35N
Torque Range
[N·m]
DCME
Direction
Multiple Unit
(Electric Straight
Style)
Automatic
Straight
Graduation
Electric Power
Switch Signal
• Electric version of ME
• Built-in brushless motor allows for noiseless fastening.
Accuracy ±5%
Torque Range
[N·m]
S.I. Model
Torque Range
[kgf·cm]
DCM250E
Min.-Max.
100-250
Grad.
5
Free
Speed
[r.p.m]
1050
1
DCM450E
200-450
10
540
Phase 200
2
DCM800E
350-800
20
310
50/60Hz
5
DCM1250E
500-1250
50
200
(100)
DCME25N
Min.-Max.
10-25
Grad.
0.5
DCME45N
20-45
DCME80N
36-80
DCME125N
50-125
Metric
Model
Voltage
[AC V]
Single
Overall
Length
[mm]
302 (339)
305 (342)
Square
Weight
Drive
[mm]
[kg]
9.5
5
12.7
5.5
6.0
1. For designing a multi-spindle system, check the PCD, minimum distance between the spindles.
2. Please specify the electric voltage.
Standard Accessories 1. Driver Unit (DR-DCME)
2. W5 hex key
Note
DCME25N
Power Supply (Sold separately)
Model
Powr Source AC (V)
PS-DCME
AC200V (AC100V)
DC140V AC15V
Specify the voltage when ordering
Note
Optional Accessories for Multiple Unit
Handle Valve (supportive handle)
Part #
Type
Air Outlet
Overall Length [mm]
Application
188
189
187
Handle Valve
Handle Valve
Handle Assist
3/8
1/8
-
135
For Direct Connection
Master Valve
-
125
Switch Handle (Switch)
Part #
331
Type
Start Switch Handle
Application
Multiple Unit Start Switch
332
333
Reset Switch Handle
Quick Reverse Handle
Reset Switch
Emergency Reset Switch
Master Valve
Application
195
MF
196
197
ME
1/2 x 1/4 x 6
3/4 x 3/8 x 2
198
199
MC
1 x 3/8 x 4
1 x 3/8 x 6
(ΦD) x (φd) x (n)
1/2 x 1/4 x 4
Slide Drive (for ME, DCME)
Model
FDME25N
FDME80N
FDME126N
FDME400N
FDME1200N
Power Torque Tools
Air Outlet x Air Supply x Number of Branch
Part #
Slide Drive (for MC)
Model
FDMC400N
FDMC1200N
Torque Sensor
Model
TC-ME2
TC-MCA
TC-MCB-2
TC-MCB
Applicable Model
ME
MC220N, MC400N
MC700N
MC1200N
45
Digital Torque
Wrench
Tester
DOTE3-G
Direction
NEW
Calibration
Digital
Manual Handle
Direct Reading
• Multiple units of measure through keypad setup
• "Loading system" stabilizes wrench during calibration procedure for optimal
results.
• RS232C output
• Max. 99 measured data can be stored.
Accuracy ±1% + 1 digit
Torque Range
Torque Wrench Inlet
Weight
cN·m
N·m
kgf·cm
kgf·m
lbf·in
lbf·ft
Max. Effective Drive
Min.-Max. 1 digit Min.-Max. 1 digit Min.-Max. 1 digit Min.-Max. 1 digit Min.-Max. 1 digit Min.-Max. 1 digit Length [mm] [mm] [kg]
Model
DOTE20N3-G
200.02000.0
0.5
DOTE50N3-G
-
DOTE100N3-G
-
DOTE200N3-G
DOTE100N3-G
DOTE3-G-MD
Model
0.05
-
-
18.00180.00
0.05
-
-
-
5.0050.00
0.01
50.0500.0
0.1
-
-
44.0440.0
0.1
3.6036.00
0.01
-
10.00100.00
0.02
100.01000.0
0.2
-
-
88.0880.0
0.2
7.3073.00
0.02
-
20.00200.00
0.05
200.02000.0
-
170.01700.0
0.5
15.00150.00
0.05
660
0.1
1
36.0360.0
0.1
1020
19.0
24
0.2
2
73.0730.0
0.2
1650
25.4
45
DOTE500N3-G
-
-
50.0500.0
DOTE1000N3-G
-
-
100.01000.0
0.5
-
-
-
5.0050.0
0.01
4404400
-
-
10.00100.00
0.02
8808800
Down Adapter (Female)
Model
Part #
[mm]
296 (DA3-2)
6.3
DOTE50N3-G
DOTE500N3-G-MD
DOTE1000N3-G-MD
DOTE100N3-G
296 (DA3-2)
297 (DA4-3)
6.3
9.5
12, 14, 17
DOTE200N3-G
DOTE500N3-G
-
-
17, 22, 27/19, 24, 30
22, 27, 29/30, 32, 36
DOTE1000N3-G
299 (DA8-6)
19.0
34, 41/46, 50
Part #
285
Size [mm]
3/8-7-8-9
286
287
1/2-16-18-21
1/2-17-22-27
288
1/2-19-24-30
Calibration
Dial Indicating
DOT35N
DOT50N
5-35.0
5-50.0
DOT100N 10-100.0
Metric Model
350DOT-MD
5000DOT-MD
1000DOT-MD
3000DOT-MD
7000DOT-MD
American Model
DOT300I-MD
DOT430I-MD
DOT1000I-MD
DOT200F-MD
DOT500F-MD
Model
DFS
Media
CD-ROM
Manual Handle
Direct Reading
Metric
Model
0.1
0.2
0.5
Accuracy ±2%
Torque Range
[kgf·cm]
Min.-Max. Grad.
350DOT
5000DOT
1000DOT
50-350
50-500
100-1000
1
2
5
Standard Accessory
Torque
Torque Range
Inlet
American
[lbf·in/lbf·ft] Wrench Max. Drive Weight Down Adapter Hex Adapter
Effective
Model
(Female)
(Male)
[mm]
[mm]
Min.-Max. Grad. Length [mm] [mm] [kg]
DOT300I
DOT430I
DOT1000I
lbf·in
30-300
40-430
lbf·in
1
2
100-1000
5
lbf·ft
lbf·ft
410
9.5
8
30-300
1
3000DOT
300-3000
10
DOT200F
20-200
1
660
DOT700N
70-700
2
7000DOT
700-7000
20
DOT500F
50-500
2
1260
19
#296
(DA3-2)
#296 (DA3-2),
#297 (DA4-3)
12.7
DOT300N
Note
DOT with Motor Driven Loading Device
Model
EPP16M2
• Dial indicating
• For clockwise testing
• Mechanical loading device
Min.-Max. Grad.
DOT-MD
Printer (P.57)
1. ( ) shows pin shape of the connecting cable.
connecting cables.
Torque Range
[N·m]
S.I.Model
DOT100N
BA-3
(AC100-240V±10%)
Model
BP-100
Applicable Models
DOTE3-G ➝ EPP16M2
DOTE3-G ➝ PC (D-SUB 9 Pin Female)
Note
Direction
10, 13, 19
Battery Pack (P.39)
383
Analog Torque Wrench
Tester
13
AC Adapter
(Power supply)
[mm]
DOTE20N3-G
Part #
382
46
Hex Adapter (Male)
DOTE200N3-G-MD
DOTE3-G Optional Accessories
Hex Adapter
S.I. Model
DOT35N-MD
DOT50N-MD
DOT100N-MD
DOT300N-MD
DOT700N-MD
12.7
DOTE100N3-G-MD
DOTE100N3-G-MD
11
DOTE3-G Standard Accessories
DOTE20N3-G-MD
DOTE50N3-G-MD
DOT
9.5
410
1. Auto-zero adjustment function.
2. Statistical function includes the number of sampling, max/min/mean values.
Note
DOTE3-G with Motor Driven Loading Device
-
2.00020.000.005
20.000
200.00
10, 13, 19
12, 14, 17
10
-
17, 22, 27
19, 24, 30
25
-
22, 27, 29
30, 32, 36
Measurement for clockwise direction only.
Calibration Kit for DOTE3-G/DOT
* Sold separately.
Refer to page 52.
TF
Fully Automatic Digital
Torque Wrench Tester
Direction
Calibration
Digital
Electric Power
Direct Reading
Fully Automatic
• Tool Management System with computer
• Ideal for Calibration Labs
• Fully automatic testing, judging, and data processing
Accuracy ±1%+1digit
Torque Range
Model
CH
TF200N
TF2000N
[mm]
[mm]
TF200N
12.7
9.5
12.7-9.5
9.5-6.35
[mm]
12.7-17, 22, 27/12.7-19, 24, 30
TF500N
12.7
9.5
19.0-12.7
9.5-6.35
9.5-10, 13, 19/9.5-12, 14, 17
19.0-22, 27, 29/19.0-30, 32, 36
9.5, 10, 13, 19/9.5-12, 14, 17
TF1000N
25.4
12.7
9.5
25.4-19.0
12.7-9.5
9.5-6.35
12.7-17, 22, 27/12.7-19, 24, 30
9.5, 10, 13, 19/9.5-12, 14, 17
TF2000N
25.4
19.0
9.5
25.4-19.0
12.7-9.5
9.5-6.35
25.4-36, 46/25.4-41, 50
19.0-22, 27, 29/19.0-30, 32, 36
TF3000N
38.1
25.4
19.0
38.1-25.4
25.4-19.0
19.0-12.7
25.4-36, 46/38.1-41, 50
25.4-36, 46/25.4-41, 50
19.0-22, 27, 29/19.0-30, 32, 36
25.4-36, 46/25.4-41, 50
Direction
0.005
0.2
1480
1550
9.5
19.0
TF1000N
2
1
2
2-50
0.02 20-500 0.2
25-1000 0.25 250-10000 2.5
5-200 0.05 50-2000 0.5
0.2
2.5
0.5
2-37
25-700
5-140
0.02
0.25
0.05
1480
1650
1550
9.5
25.4
12.7
2160
380
TF2000N
3 0.5-20 0.005 5-200 0.05 0.05-2 0.0005 0.05-2 0.0005
5-170
0.05 0.5-14 0.005
1 100-2100 1 1000-21000 10
10-210 0.1 1000-18000 10 100-1500 1
2 20-500 0.2 200-5000 2
2-50 0.02
2-50
0.02 200-4500
2
20-370
0.2
1480
2150
1550
9.5
25.4
19.0
2660
315
3
2-50
0.02 20-500 0.2
1 200-3000 1 2000-30000 10
0.2-5
2 100-2100
1
3160
380
3
0.2
2-50
TF3000N
20-500
Calibration
Digital
CH
TCC500N
TCC1000N
0.002
20-450
0.2
2-37
0.02
1480
9.5
-
-
20-300
0.1
2000-25000
10
200-2000
1
2650
38.1
10-210
0.1
10-210
0.1
1000-18000
10
100-1500
1
2150
25.4
0.02
2-50
0.02
200-4500
2
20-370
0.2
1550
19.0
Direct Reading
Torque Tool Control System
Torque Range
[cN·m/N·m]
Min.-Max.
Grad.
N·m
N·m
1
2
4-100
1-25
0.02
0.005
1
4-100
cN·m
20-500
0.02
cN·m
0.1
N·m
N·m
1
2
1
20-500
4-100
50-1000
0.1
0.02
0.2
2
20-500
0.1
Torque Wrench
Max. Effective Length
[mm]
Inlet
Drive
[mm]
Dimensions [mm]
Weight
Overall
Length
Width
Height
670
370
330
26
1165
560
395
53
1865
780
510
135
[kg]
12.7
9.53
440
12.7
6.35
1030
1700
19.05
12.7
25.4
19.05
Others
DA3-2 RA3
12.7-10-13-19
DA4-3 RA4 Power cable,
12.7-12-14-17
DA4-3 RA4 Application
sofware CD,
12.7-10-13-19
PC
12.7-12-14-17 DA4-3 RA4 connecting
19.0-17-22-27 DA6-4 RA6 cable
(No.561),
19.0-19-24-30
Tohnichi19.0-17-22-27
proprietary
19.0-19-24-30 DA6-4 RA6
USB memory
25.4-36-46
DA8-6 RA8 stick
25.4-41-50
TCC Optional Accessories
Applicable Models
TCC ➝ EPP16M2
TCC ➝ PC (D-Sub 9 Pin Female)
Display
Switch
Measurement Data Memory
Torque Wrench/Driver Registration Data
Measurement Mode
Channel Switch
OK/NG Judgment
Statistic Calculation
Zero Adjustment
Interface
Reset
Other
Operation Temperature
Power
Power Consumption
5.7 type STN LCD 320 x 240 dots 2 colors (Blue, White) CFL Back light
Touch Panel
(1) Click, direct reading mode
When 1 measuring point x 3 times: Max 2730 data
(2) Manual mode 200 data
Torque wrench/Torque screwdriver registration data, 1000pcs worth at maximum (model, serial number,
measurement point, measurement count, accuracy level, channel, measurer, past record)
Maximum data amount (1000pcs worth) is based on testing torque wrenches of single force direction.
When testing bi-direction torque wrenches such as BQSP, it will be less than 1000pcs.
Click mode/Direct reading mode/Manual mode
Switching measuring torque range (changeable by channel change button)
Accuracy level setting (1-99%) OK/NG judgment
Sample q'ty, Max./Min./Ave. value (For manual mode only)
Automatic (press C key)
Serial interface (RS-232 comliant), USB interface (Tohnichi-proprietary USB memory stick)
Manual button/Auto reset (0.1-5 sec.)
Limit Switch working confirmation lamp
0-40 Celsius (no condensation)
AC100-240V 50/60Hz auto shift
Less than 20W
Down Ratchet
Adapter Adapter
Manual Handle
TCC Specifications
TCC Standard Accessories
Part #
380
561
0.2-5
• Two sensors for wide torque capacity
• Installed Tool Management Software
• Touch screen display
TCC500N
TCC1000N
2
0.002
315
* Sold separately.
Refer to page 52.
2
TCC500N
200-5000
20-450
250-8500
50-1700
Calibration Kit for TF
TCC100N-D
TCC100N-D
1000-21000 10
0.2-5 0.002 0.2-5 0.002
2.5-100 0.025
0.5-20 0.005 0.5-20 0.005
1860
Standard Accessories 2m x 2P Flat Type Plug
TCC100N
TCC100N
240
0.5-14
20-370
Model
Hex Adapter
12.7
0.05
2
9.5-10, 13, 19/9.5-12, 14, 17
Calibrator &
TCC Torque
Controller
Model
[mm] [mm] [kg]
1550
0.5-20 0.005 5-200 0.05 0.05-2 0.0005 0.05-2 0.0005
5-170
20-500 0.2 200-5000 2
2-50
0.02 200-4500
TF500N
Adapter
Ratchet Adapter Down Adapter
[mm]
2
1
TF Standard Accessories
Model
[N·m]
[kgf·cm]
[kgf·m]
[ozf·in]
[lbf·in]
[lbf·ft]
Min.-Max. Grad. Min.-Max. Grad. Min.-Max. Grad. Min.-Max. Grad. Min.-Max. Grad. Min.-Max. Grad.
1
5-200 0.05 50-2000 0.5
0.5-20 0.005 50-1700
0.5
5-140
0.05
Torque Wrench
Inlet Overall
Weight
Max. Effective
Drive Length
Length
Calibration Kit for TCC
Printer (P.57)
Model
EPP16M2
* Sold separately.
Refer to page 52.
47
Wrench Line
LC2-G Torque
Checker
Direction
NEW
LC200N2-G
Checking
Digital
LC20N2-G
Run
1000-2000
-
10
-
10.0-20.0
5.00-200.00
Peak
-
-
-
Run
LC1000N2-G
Applicable
Model
Part #
Square Drive
[mm]
Hex Size (Male)
[mm]
282
LC20N2-G
9.5
8, 10, 12, 13, 14, 17
280
LC200N2-G
12.7
8, 10, 12, 13, 14, 17, 19, 22
270
272
274
276
Applicable
Model
Inlet Drive
[mm]
Hex Size (Male)
[mm]
LC20N2-G
LC200N2-G
6.35
9.5
12.7
19.0
9.5
LC1000N2-G
ST2
Direction
ST2 Optional Accessories
Part #
379
384
Applicable Models
R-DT999 ➝ EPP16M2
ST2 (USB mini B) ➝ PC (USB A)
Infrared Receiver (P.56)
248
249
-
100-174
50.0-1740.0
1
0.5
4.00-140.00
0.05
5.00-9.95
10.0-99.9
0.05
0.1
50.0-99.5
100-999
0.05
0.1
-
-
50.0-99.5
100-999
0.5
1
4.00-9.95
10.0-99.9
0.05
0.1
-
100-200
50.0-1000.0
50.0-99.8
1
0.2
0.2
1000-2000
-
1
-
5.00-100.00
5.00-9.98
0.02
0.02
1000-1740
500-8800
500-998
10
2
2
100-140
36.8-735.0
36.8-99.8
1
0.2
0.2
-
100-1000
1
-
-
10.0-100.0
0.1
1000-8800
10
100-735
1
Applicable Models
ST10N2, ST100M2, ST90i2
ST20N2, ST200M2, ST180i2
ST50N2, ST500M2, ST450i2
ST100N2, ST1000M2, ST900i2
ST200N2, ST2000M2, ST150F2
ST500N2, ST5000M2, ST30F2
ST1000N2, ST10000M2, ST700F2
Calibration Kit for LC2-G/ST2
* Sold separately.
Refer to page 52.
12.7
25.4
34
Model
BP-100
Part #
Applicable Models
382
383
LC2-G ➝ EPP16M2
LC2-G ➝ PC (D-SUB 9 Pin Female)
Printer (P.57)
Model
EPP16M2
1. ( ) shows shape of the connecting
plug.
connector shapes.
Note
Checking
Digital
Model
DFS
Re-Chargeable
Media
CD-ROM
Direct Reading
• Compact handheld cordless sensor
• Ideal for nutrunner torque output
• Use right between bolt and wrench
Torque Range
[N·m]
Min.-Max.
Grad.
Metric
Model
Torque Range
[kgf·cm/kgf·m]
Grad.
kgf·cm
0.1
American
Model
Torque Range
[lbf·in/lbf·ft]
ST10N2
2-10
0.01
ST100M2
ST20N2
ST50N2
4-20
10-50
0.02
0.05
ST200M2
40-200
0.2
ST180i2
40-180
0.2
ST100N2
20-100
0.1
ST500M2
ST1000M2
100-500
200-1000
0.5
1
ST450i2
ST900i2
100-450
200-900
0.5
1
ST150F2
lbf·ft
30-150
lbf·ft
0.2
ST360F2
72-360
0.5
120
19.0
ST700F2
140-700
1
135
25.4
ST200N2
40-200
0.2
ST2000M2
400-2000
ST500N2
100-500
0.5
ST5000M2
ST1000N2
200-1000
1
ST10000M2
1000-5000
5
kgf·m
kgf·m
20-100
0.1
2
ST90i2
Min.-Max.
lbf·in
20-90
Overall Square
Weight
Length Drive
[kg]
[mm]
Grad. [mm]
lbf·in
0.1
6.35
Min.-Max.
kgf·cm
20-100
9.5
75
0.25
12.7
1.3
Not for use with impact wrenches.
Note
Standard Accessories 1. Quick Battery Charger (BC-4) 2. Battery Pack (built-in) 3. CD-ROM (USB Driver)
4. USB Connecting Cable 5. Carrying Case
Model
Part #
DA3-2
DA4-3
DA6-4
DA8-6
DA12-8
296
297
298
299
300
• Compact adapter to reduce the size of
square drive
Dimensions [mm]
Square Drive (Male) Square Drive (Female)
9.5
6.35
12.7
9.5
19.0
12.7
25.4
19.0
38.1
25.4
Height
12
15
19
26
44
Outside Dia.
13
18
28
35
55
Capacity
[N·m]
14
70
220
750
2100
Weight
[g]
5
11
34
66
320
RA Wrench Testers
Ratchet Adapter for Torque • Rotates wrench to proper testing
position on tester
• Gear action 3.75 degrees
Model
RA3
RA4
RA6
RA8
RA12
Square Drive (Male)
9.5
12.7
19.0
25.4
38.1
Dimensions [mm]
Square Drive (Female)
Height
9.5
40.5
12.7
49
19.0
65
25.4
86
38.1
111
Down Adapter
48
10.5
Battery Pack (P.39)
LC2-G Optional Accessories
Down Adapter for Torque
Extension Bar
247
-
DA Wrench Testers
Model
R-DT999
Part #
283
281
1
0.5
Standard Accessories AC Adapter (BA-3): AC100-240V±10%
S.I. Model
ST1000N2
0.1
10-200
0.05 50.0-2000.0
1. Dimensions: L278mm x W160mm x H167mm (LC20N-G, LC200N-G)
L500mm x W290mm x H186mm (LC1000N2-G)
2. Calibration kits (TCL models) are optional. Refer to page 52.
3. Max. 99 measured data can be stored.
12.7
19.0
25.4
SPINTORK (Rotary Peak
Torque Meter)
ST50N2
Peak
Note
Socket Adapter (P.37)
Part #
Torque Range
Inlet
Weight
cN·m
N·m
kgf·cm
kgf·m
lbf·in
lbf·ft
Mode
Drive
Min.-Max. 1 digit Min.-Max. 1 digit Min.-Max. 1 digit Min.-Max. 1 digit Min.-Max. 1 digit Min.-Max. 1 digit [mm] [kg]
5.00-174.00 0.05
Run 50.0- 2000.0 0.5 0.500-20.000 0.005 5.00-200.00 0.05
50.0-99.5
0.5 0.500-0.995 0.005 5.00-9.95 0.05
5.00-9.95
0.05
9.5
Peak
100-999
1
1.00-9.99 0.01 10.0-99.9
0.1
10.0-99.9
0.1
-
LC200N2-S
LC2-G Standard Accessories
Hexagon Head Adapter
Direct Reading
• Multiple units of measure through key pad setup
• Suitable for use near the assembly line
• For daily inspections of torque wrenches
Model
LC1000N2-G
Manual Loading
Thickness Outside Dia.
23
62
28
90
35
125
51
190
60
234
Capacity
[N·m]
50
200
750
2100
3000
Ratchet Adapter
Weight
[kg]
0.3
0.9
2.3
7.1
12.6
Torque
TDT2-G Digital
Screwdriver Tester
Direction
NEW
Calibration
Digital
Manual Rotary
Direct Reading
Loading Device
• Multiple units of measure through key pad setup
• Ideal for testing click and dial indicating torque screwdrivers
• Optional TDTLA for testing small torque wrenches
Torque Range
Model
Inlet Drive
Dimensions
[mm]
Weight
[mm]
Overall
Width Height
Length
[kg]
cN·m
Min.-Max. 1digit
kgf·cm
ozf·in
ibf·in
Min.-Max. 1digit Min.-Max. 1digit Min.-Max. 1digit
2.00-60.00
0.01
0.200-6.000 0.001 3.00-80.00
0.01
0.200-5.000
0.001
6.35 Hex (Male)
TDT600CN2-G 20.0-600.0
0.1
2.00-60.00
0.1
2.00-50.00
0.01
with a groove (0.7mm)
TDT60CN2-G
0.01 30.0-800.0
220
220
220
13.5
1. Loading device keeps stable measuring conditions to avoid reading errors.
Note
Standard Accessories 1. AC Adapter (BA-3) 2. Loading Device for FTD 3. Loading Device for LTD
TDT600CN2-G
TDT600CN2-G+TDTLA
TDT2-G Optional Accessories
Calibration Kit for TDT2-G
* Sold separately.
Refer to page 52.
Printer (P.57)
Part #
Applicable Models
Model
382
383
TDT2-G ➝ EPP16M2
TDT2-G ➝ PC (D-SUB 9 Pin Female)
EPP16M2
1. ( ) shows shape of the connecting plug.
connector shapes.
Note
Model
Media
DFS
CD-ROM
Battery Pack (P.39)
Model
BP-100
Loading Device for TDT2-G
Model
TDT60CN2-G measures 2-60 cN·m range of torque wrenches.
TDT600CN2-G measures 20-600 cN·m range of torque wrenches.
TDTLA
Direction
Analog Torque Dial Indicating 3-jaw Chuck Direct Reading
Gauge
• Compact portable handheld design
• Top and side scales for easy reading
• Three fingered keyless chuck
S.I. Model
Torque Range
[cN·m]
Metric
Model
Min.-Max. Grad.
ATG045CN
0.05-0.45
ATG09CN-S
ATG1.5CN-S
ATG6CN
Part #
322
Description
Plastic Case and Chuck
Direction
* Sold separately.
Refer to page 52.
2
ATG1.5Z-S
ATG2.4Z-S
0.2-1.5
0.3-2.4
0.02
0.05
30-300
60-600
5
10
ATG4.5Z-S
ATG9Z-S
0.5-4.5
1-9
0.1
0.2
20
50
ATG18Z-S
ATG36Z-S
2-18
4-36
0.5
0.5
1-12
3-24
0.2
0.5
1200ATG-S
2400ATG-S
100-1200
300-2400
-
-
-
-
BTG15CN-S
BTG24CN-S
BTG36CN-S
BTG60CN-S
BTG90CN-S
BTG150CN-S
2-15
3-24
4-36
6-60
10-90
20-150
0.2
kgf·cm
0.2-1.5
0.3-2.4
0.4-3.6
0.6-6
1-9
2-15
1
2
1.5BTG-S
2.4BTG-S
3.6BTG-S
6BTG-S
9BTG-S
15BTG-S
BTG60Z-S
BTG120Z-S
kgf·cm
0.02 1.5BTG-A-S
2.4BTG-A-S
0.05
3.6BTG-A-S
6BTG-A-S
0.1
9BTG-A-S
0.2 15BTG-A-S
6-60
10-120
lbf·in
0.1-1.5
0.3-2.4
0.4-3.6
0.6-6
1-9
2-15
φ1-
φ6.5
1
2
lbf·in
0.02
φ10.02
φ8.5
0.05
0.1
0.1
0.2
99
43.5
0.18
135
64.2
0.52
1. ATG045CN, 45ATG and ATG06Z are provided without side or top memory pointer.
2. “Without memory pointer” models are available. Remove “-S” from the model name when ordering.
(Ex. ATG09CN, BTG15CN)
3. Aluminum case and steel chuck are standard for ATG models. Plastic case and chuck can be ordered separately.
Digital
3-jaw Chuck
Direct Reading
Battery
• For measurement, inspection and tightening of low torque ranges
• Flip-up display can be adjusted for optimal reading
• Three-jaw keyless chuck equipped to clamp the object firmly
Torque Range
[cN·m]
Min.-Max.
BTGE10CN
2-10
BTGE20CN
4-20
BTGE50CN
10-50
BTGE100CN 20-100
BTGE200CN 40-200
Calibration Kit for ATG/BTG/BTGE
10-90
20-150
ATG12CN-S
ATG24CN-S
0.5
Chuck Dimensions [mm]
Weight
Grip Overall Outside
Min.-Max. Grad. [mm] Length Diameter [kg]
ozf·in
ozf·in
0.06-0.6 0.01
Torque Range
[ozf·in/lbf·in]
90ATG-S
150ATG-S
0.05 300ATG-S
0.1 600ATG-S
S.I. Model
BTGE200CN
0.02
0.3-3
0.6-6
Note
BTGE Digital Torque Gauge
0.01 45ATG
American
Model
Min.-Max. Grad.
gf·cm
gf·cm
5-45
1
ATG06Z
ATG3CN-S
ATG6CN-S
BTG36CN
ATG Optional Accessories
0.1-0.9
0.2-1.5
Accuracy ±2%
Torque Range
[gf·cm/kgf·cm]
Grad.
0.01
0.02
0.05
0.1
0.1
Metric
Model
Torque Range
[kgf·cm]
Min.-Max.
BTGE1KM
0.2-1
BTGE2KM
0.4-2
BTGE5KM
1-5
BTGE10KM 2-10
BTGE20KM 4-20
Grad.
0.001
0.002
0.005
0.01
0.02
American
Model
BTGE14Z
BTGE28Z
BTGE70Z
BTGE140Z
BTGE280Z
Torque Range
[ozf·in]
Min.-Max.
3-14
6-28
15-70
30-140
60-280
Grad.
0.02
0.05
0.1
0.2
0.5
American
Model
Torque Range Chuck Dimensions [mm]
Weight
[lbf·in]
Grip Overall Outside
Min.-Max. Grad. [mm] Length Diameter [kg]
BTGE09I
BTGE1.8I
BTGE4.4I
BTGE9I
BTGE18I
0.2-0.9
0.4-1.8
1-4.4
2-9
4-18
0.001
0.002
φ10.005
φ8.5
0.01
0.02
130
75
ATG/BTG
0.65
Standard Accessories 1. Can be used for checking accuracy of torque screwdrivers.
2. Max 999 readings can be saved with statistical function max/min/mean values.
BTGE Optional Accessories
Part #
384
Applicable Models
BTGE (USB mini B) ➝ PC (USB A)
BP-C1
Battery Pack
Model
BP-C1
49
TME2
Digital Torque Meter
Digital
Pole Clamping
Direct Reading
• Ideal for testing torque on bottle caps
• Up to 99 measured data can be stored.
Direction
Torque Range
[cN·m]
S.I. Model
Min.-Max.
3TME10CN2
3TME20CN2
Grad.
Torque Range
[gf·cm/kgf·cm]
Metric
Model
2.00-10.00 0.01 3TME10CN2-M
4.00-20.00 0.02 3TME20CN2-M
10.00-50.000 0.05 3TME50CN2-M
3TME50CN2
Min.-Max.
Grad.
gf·cm
gf·cm
200-1000
400-2000
1000-5000
1
2
5
kgf·cm
Dimensions [mm]
Chuck
Weight
Size Overall
Width Height
[kg]
Grad. [mm] Length
Torque Range
[ozf·in/lbf·in]
American
Model
Min.-Max.
ozf·in
3TME10CN2-Z
3TME20CN2-Z
3TME50CN2-Z
ozf·in
2.80-14.00 0.01
5.60-28.00 0.02
φ1414.00-70.00 0.05
252
φ110
3TME100CN2
20.0-100.0
0.1 3TME100CN2-M
2.00-10.00
kgf·cm
0.01 3TME100CN2-Z 28.00-140.0 0.1
2TME200CN2
40.0-200.0
0.2 2TME200CN2-M
4.00-20.00
0.02 2TME200CN2-I
0.5 2TME500CN2-M
158
185
3.5
223
283
12
lbf·in
lbf·in
3.50-17.00 0.02
8.80-44.00 0.05 φ18331
0.1 φ190
2TME500CN2
100.0-500.0
10.00-50.00
0.05 2TME500CN2-I
2TME1000CN2
200-1000
1
2TME1000CN2-M
20.0-100.0
0.1
2TME1000CN2-I 17.6-88.00
2TME2000CN2
400-2000
2
2TME2000CN2-M
40.0-200.0
0.2
2TME2000CN2-I 35.0-175.0
0.2
1. Can be used for checking accuracy of torque screwdrivers.
3. Calibration kits (TMTCL models) are optional. Refer to page 52.
4. Statistical Data: Hi, Lo, Sample, Ave., Range Variation, and Standard Deviation
Note
Standard Accessories 1. AC Adapter (BA-4)
2. Rubber Nail
3. Supportive Plate (for 2TME2 only)
2TME500CN2
TME2 Optional Accessories
Applicable Models
Model
382
383
TME2 ➝ EPP16M2
TME2 ➝ PC (USB A)
EPP16M2
Analog Torque Meter
1. ( ) shows pin shape of the connecting
cable.
connecting cables.
Note
TM
Printer (P.57)
Part #
Pole Clamping
Model
DFS
Media
CD-ROM
Direct Reading
• Dial indicating
• Wide variety of torque testing ranges
Direction
Accuracy ±2%
S.I. Model
2TM400CN
5TM2.5MN
Calibration Kit for TME2/TM
* Sold separately.
Refer to page 52.
Standard
With Memory Pointer
Min.-Max.
4TM10MN
4TM15MN
4TM10MN-S
4TM15MN-S
mN·m
1-10
1.5-15
4TM25MN
4TM50MN
4TM25MN-S
4TM50MN-S
4TM75MN
4TM75MN-S
3TM10CN
3TM15CN
3TM25CN
3TM50CN
3TM75CN
2TM100CN
2TM150CN
2TM200CN
2TM300CN
2TM400CN
2TM500CN
2TM600CN
2TM750CN
3TM10CN-S
3TM15CN-S
3TM25CN-S
3TM50CN-S
3TM75CN-S
2TM100CN-S
2TM150CN-S
2TM200CN-S
2TM300CN-S
2TM400CN-S
2TM500CN-S
2TM600CN-S
2TM750CN-S
gf·cm
10-100
15-150
2.5-25
5-50
mN·m
0.2 4-TM100-A-S 0.01-0.086 0.002
4-TM150-A-S 0.02-0.13
0.5
0.005
4-TM250-A-S 0.025-0.215
1 4-TM500-A-S 0.05-0.43 0.01
8-75
cN·m
1-10
1.5-15
2.5-25
5-50
8-75
10-100
20-150
30-200
30-300
40-400
50-500
60-600
80-750
2 4-TM750-A-S
cN·m
0.2 3-TM1-A-S
3-TM1.5-A-S
0.5
3-TM2.5-A-S
1 3-TM5-A-S
2 3-TM7.5-A-S
2-TM10-A-S
2
2-TM15-A-S
2-TM20-A-S
5 2-TM30-A-S
2-TM40-A-S
2-TM50-A-S
10 2-TM60-A-S
2-TM75-A-S
80-750
kgf·cm
0.1-1
0.15-1.5
0.25-2.5
0.5-5
0.8-7.5
1-10
2-15
3-20
3-30
4-40
5-50
6-60
8-75
0.08-0.65
0.02
0.1-0.86
0.15-1.3
0.25-2.15
0.5-4.3
0.8-6.5
1-8.6
2-13
3-17
3-26
3.5-35
4-43
5-50
7-65
0.02
0.05
0.1
0.2
0.2
0.5
1
25-250
50-500
gf·cm
2
5
10
20
kgf·cm 252
0.02
φ14-
φ110
3
0.05
0.1
0.2
0.2
0.5
331
223 133.5
φ1810.5
φ190
1
Low Capacity (below 7.5 mN·m) Torque Meter
S.I. Model
Torque Range
[mN·m]
5TM1MN
5TM1.5MN
Min.-Max. Grad.
0.2-1
0.05
0.2-1.5
Note
158 109.5
“-S” models are provided with a memory pointer.
Note
5TM2.5MN
5TM5MN
5TM7.5MN
50
Dimensions [mm]
American Torque Range Metric Torque Range
American/Metric
Weight
[lbf·in]
[kgf·cm/gf·cm]
Overall
Chuck
Model
Width Height
Size [kg]
Grad.
Min.-Max.
Grad. Min.-Max. Grad. Length
Torque Range
[mN·m/cN·m]
0.5-2.5
1-5
1-7.5
0.1
0.2
Metric
Model
Torque Range
[gf·cm]
Grad.
5-OT10
5-OT15
Min.-Max.
2-10
2-15
5-OT25
5-OT50
5-OT75
5-25
10-50
10-75
1
0.5
2
American
Model
5TM0.15Z
5TM0.2Z
5TM0.35Z
5TM0.7Z
5TM1Z
Accuracy ±2%
Torque Range
[ozf·in]
Dimensions [mm]
Overall
Chuck
Width Height
Size
Min.-Max. Grad. Length
0.02-0.15 0.005
0.04-0.2
0.01
φ60.05-0.35
122 76.5 59
φ58
0.3-0.7
0.02
0.2-1
0.05
1. 5TM models are supplied without memory pointer.
2. When calibrating the 5TM models, ask Tohnichi for assistance.
Weight
[kg]
0.3
TCF
Fixed Type Torque
Sensor
Fixed
Voltage Output
• Requires CD42 to display torque reading
Torque Range
[N·m]
S.I. Model
Min.-Max.
CD42
TCF20N
Display (Sold separately)
TCF02N
0.02-0.2
TCF04N
0.04-0.4
TCF1N
0.1-1
TCF2N
TCF4N
0.2-2
0.4-4
Torque Range
[kgf·cm]
Metric
Model
Min.-Max.
TCF1.8
0.18-1.8
-
-
TCF18
1.8-18
-
TCF10N
1-10
TCF20N
TCF40N
2-20
4-40
TCF100N
10-100
TCF200N
TCF400N
20-200
40-400
TCF1000N
100-1000
TCF2000N
200-2000
-
TCF180
18-180
-
Torque Range
[lbf·in/lbf·ft]
American
Model
Min.-Max.
TCF1.8I
lbf·in
0.18-1.8
TCF3.5I
0.35-3.5
TCF9I
0.9-9.0
TCF18I
TCF35I
1.8-18
3.5-35
[kg]
56
0.45
45
62.5
TCF90I
9.0-90
18-180
38-350
TCF75F
7.5-75
TCF150F
TCF300F
15-150
30-300
TCF750F
75-750
TCF1500F
150-1500
0.5
9.5
66
70
0.6
12.7
100
105
2.5
lbf·ft
TCF1800
180-1800
-
-
TCF18000
Weight
Height Diamater
[mm]
[mm]
6.35
TCF180I
TCF350I
-
Dimensions
Inlet
Drive
[mm]
1800-18000
19.0
135
140
6
25.4
180
178
12
2. Display (CD42) is sold separately.
Note
Standard Accessories Connecting Cable
Attachment for TCF (Sold separately)
TP (Test Piece): Torque measurement for power torque tools
Inlet
Torque Range
S.I.
[N·m]
Metric
[kgf·cm]
American
[lbf·in/lbf·ft]
Min.-Max.
Min.-Max.
Min.-Max.
Model
Applicable
Dimensions
Width Across Nominal
Diameter Height
Flats
Size of
Screw
[mm]
[mm]
[mm]
TCF Model
Weight
[kg]
lbf·in
TP18N+TCF20N
TP2.5N
TP18N
0.25-2.5
1.8-18
2.5-25
18-180
TP180N
TP1800N
18-180
180-1800
180-1800 1800-18000
2-22
16-160
lbf·ft
TCF02N-TCF4N
TCF10N, TCF20N
8
13
M4
M6
18
35
58
83.5
0.08
0.27
30-130
130-1300
TCF40N-TCF200N
TCF400N-TCF2000N
24
50
-
65
140
148
297.5
1.9
16.8
1. Adapter 4H-3 (#273) is necessary for TCF40N.
2. Adapter 8P-6 (#295) is necessary for TCF400N.
Note
DTF (Drill Chuck): Torque measurement for axial work pieces
DTF5-2+TCF20N
Model
Applicable TCF Models
DTF5-3
DTF5-2
TCF02N-TCF4N
TCF10N-TCF40N
Chuck Size
Square Drive
[mm]
[mm]
Max. φ5
6.35
9.5
Dimensions
Diamater
Height
[mm]
[mm]
65
61
33
TTF/ATF: Table/Fixture: Ideal for testing torque on bottle caps
Model
TTF
TTF7
ATF1.8-2
TTF11
Rotary Type Torque
Sensor
TCR18N
TCR18N
φ18-190
φ180
• Captures directly applied torque
• Requires CD42 to display torque reading
Torque Range
[N·m]
Min.-Max.
CD42
φ70
φ110
Rotary
Voltage Output
S.I. Model
φ10-70
φ14-110
ATF attachment is required to fix TTF table.
Note
TCR
TCF10N-TCF20N
TCF2N-TCF4N
TCF10N-TCF20N
Table Dia.
[mm]
TCR180N
TCR700N
TCR1800N
Note
1.8-18
Metric
Model
TCR180
18-180
70-700
180-1800
TCR1800
TCR7000
TCR18000
Torque Range
[kgf·cm]
Min.-Max.
18-180
American
Model
TCR180-A
180-1800 TCR1800-A
700-7000 TCR7000-A
1800-18000 TCR18000-A
Torque Range
[lbf·in/lbf·ft]
Min.-Max.
lbf.in
16-160
lbf.ft
13-130
50-500
130-1300
Allowable Square
Height
Rotation Drive
[r.p.m] [mm]
[mm]
Width
Weight
[mm]
[kg]
9.5
91
76
0.9
12.7
19.0
25.4
104
118.5
138.5
83
95
110
1.3
2.0
3.6
2000
1000
TTF11+ATF18+TCF20N
TCF02N-TCF4N
ATF18
ATF1.8-2
ATF18
TTF19
Chuck Size
[mm]
Applicable TCF
ATF
2. Display (CD42) is sold separately.
Standard Accessories Connecting Cable
Calibration Kit for TCF/TCR
* Sold separately.
Refer to page 52.
51
Calibration Kit
Calibration Kit for DOTE3-G/DOT
Model
Calibration Kit for TDT2-G
Model
Description
Applicable Models
TDTCL60CN
Calibration Lever x 1, Wire x 1, Calibration Roller x 1,
Scale Pan (100g) x 1, Scale Holder (1kg) x 1,
TDT60CN2-G
TDTCL600CN
Calibration Lever x 1, Wire x 1, Calibration Roller x 1,
Scale Pan (100g) x 1, Scale Holder (1kg) x 1,
TDT600CN2-G
Description
Calibration Lever
DOTCL36N
Stand
Reaction Unit
KL-DOTCL36N
Scale Holder Applicable Models
DOT35N
DOT50N
WT0.5
DOTE20N3-G
DOTE50N3-G
RU-DOTCL100N
DOTCL100N
KL-DOTCL100N
DOTCL200N
KL-DOTCL200N
DOTCL360N
KL-DOTCL360N
DOTCL700N
KL-DOTCL700N
KS-DOTCL
DOT100N
DOTE100N3-G
WT1
RU-DOTCL360N
RU-DOTCL700N
DOT300N
WT5
DOTCL1000N KL-DOTCL1000N
DOTE500N3-G
DOT700N
DOTE1000N3-G
Calibration Lever, Adapter
TFTCL200N
TFTCL500N
Lever x 2
Adapter x 2
TFTCL1000N
Lever x 3
Adapter x 2
TFTCL2000N
Description
Stand
Wire
Description
Applicable Models
Main Unit, Calibration Pulley x 2,
Wire x 2, Scale Pan (5g, 100g)
ATG
BTGTCL150CN
Main Unit, Calibration Pulley x 2,
Wire x 3, Scale Pan (5g, 100g)
BTG/BTGE
TF200N
TF500N
1 Set
TF1000N
TF2000N
Wire x 4
Description
Calibration Lever Stand
Wire
TCCTCL100N
Wire x 2
TCCTCL100N-D
Wire x 3
TCCTCL500N
Lever x 2
TCCTCL1000N
1 Set
Applicable Models
2TM/2TME2
3TMTCL
Wire x 1, Roller x 1, Frame x 1,
Bolt x 2, Scale Pan (5g x 1, 100g x 1)
3TM/4TM/3TME2
Model
Optional Item
Scale Holder
Weight
Applicable
Models
100g x 1,
1kg x 1
TCC100N
1kg x 1, 2kg x 2,
5kg x 3, Weight Set TCC100N-D
Wire x 4
500g x 1
1kg x 1
5kg x 1
1kg x 1, 2kg x 2,
5kg x 9, Weight Set
TCC500N
Wire x 2
1kg x 1
5kg x 1
1kg x 1, 2kg x 2,
5kg x 13, Weight Set
TCC1000N
Consult Tohnichi in case you have DOTCL.
Note
Description
Wire x 1, Roller x 1, Frame x 1, Bolt x 2,
Scale Holder (1kg) x 1, Scale Pan (100g) x 1
Calibration Kit for LC2-G/ST2/TCF/TCR
Calibration Kit for TCC
Model
Model
2TMTCL
TF3000N
Supplied upon request.
Note
Adapter (#807) is required when calibrating BTGE models.
Calibration Kit for TME2/TM
Applicable Models
Wire x 2
Lever x 3
Adapter x 1
TFTCL3000N
Model
ATGTCL24CN
Note
Calibration Kit for TF
Model
Calibration Kit for ATG/BTG/BTGE
DOTE200N3-G
Description
Applicable Models
TCL50N
Calibration Lever, Wire, Scale Holder (1kg),
Scale Pan (100g)
TCF10N-TCF40N, TCR18N
LC20N2-G, ST10N2-ST50N2
TCL200N
Calibration Lever, Wire,
Scale Holder (1kg)
TCF100N-TCF200N, TCR180N
LC200N2-G, ST100N2-ST200N2
TCL800N
Scale Holder (10kg)
TCF400N, TCR700N, ST500N2
TCL1000N
Scale Holder (5kg)
TCF1000N, ST1000N2,
LC1000N2-G
TCL2000N
Scale Holder (10kg)
TCF2000N, TCR1800N
1. TCL1000N and TCL2000N are supplied upon request.
2. #271 is required when calibrating ST10N2.
Note
TDTCL600CN
DOTCL100N
TFTCL2000N
TCL200N
TCCTCL500N
ATGTCL24CN
2TMTCL
Weight
Model
WP-TCL5
WP-TCL2
WP-TCL1
WS-TCL2
Note
52
Weight
5kg
2kg
1kg
Weight Set (2kg)
1. A dead weight is available for sale.
2. Calibration certificate for dead weight is available on request.
BTM/
B-BTM
Bolt Tension Meter
Hydraulic
Dial Indicating
• Bourdon type hydraulic bolt tension meter
• Measure bolt tension to determine optimal torque
Axial Tension
Range
[kN]
S.I. Model
Axial Tension
Range
[ton]
Metric
Model
Min.-Max. Grad.
BTM400K
Bourdon Type
B-BTM13K
BTM400K
100-400
B-BTM13K
1.2-13
B-BTM40K
4-40
B-BTM130K
12-130
2
B-BTM400K
40-400
5
5
Min.-Max. Grad.
40BTM-2
10-40
0.5
0.2 1.3B-BTM 0.12-1.3 0.02
0.5 4B-BTM
0.4-4
0.05
13B-BTM
1.2-13
0.2
40B-BTM
4-40
0.5
Accuracy ±3%
Dimensions
Applicable Nominal
American
Diameter of Bolts Overall Overall Overall Weight
Model
(Minimum Length) Length Thickness Height
Min.-Max. Grad.
[mm]
[mm]
[mm]
[mm] [kg]
Hexagon Bolt
M16 (70), M20 (75)
M22 (80), M24 (85)
40BTM-2-A 23000-90000 1000
260
64
280
12.6
Torsia Bolt
M16 (65), M20 (70)
M22 (75), M24 (80)
Standard Bolt
1.3B-BTM-A
300-2800
50
M5 (20), M6 (21)
106
78
217
7.7
M7 (22), M8 (23)
Standard Bolt
4B-BTM-A
1000-9000 100 M10 (29), M12 (31)
134
82
241
9.8
M14 (32)
Standard Bolt
13B-BTM-A 3000-28000 500 M16 (41), M18 (43)
186
106
287
17.5
M20 (44), M24 (47)
Standard Bolt
40B-BTM-A 1000-90000 1000 M27 (72), M30 (74)
280
126
369
31.0
M36 (79), M42 (84)
Axial Tension
Range
[lbf]
1. BTM400K comes with a plate and bushing for torsia bolt M20 and M22. Other plates and bushings are
optional.
2. “Hexagon Bolt” in the above list stands for the high-tensile hexagon bolt for friction bonding.
Note
Standard Accessories Plate, Bushing, Spanner for plate, Bolt for plate, Storage Case, Calibration Certificate
BTM Optional Accessories
Busing for Hexagon Bolt
NEW
Bushing for Torsia Bolt
Plate for Torsia Bolt/Hexagon Bolt NEW
Part #
Applicable Nominal
Diameter of Bolts
Part #
Applicable Nominal
Diameter of Bolts
Part #
Applicable Nominal
Diameter of Bolts
650
M16
665
M16
669
M16
651
652
653
M20
M22
M24
666
667
668
M20
M22
M24
670
671
672
M20
M22
M24
• Creates consistent bolt tension
• Applied to fasteners and nuts
Model
Fcon
Axial Tension Stability Characteristics
Torque fluctuating coefficient
Sales Unit: 10pcs/case
Content: 90g/bottle
Fcon
Test conditions
Axial tension 80 KN
Hex bolt, nut, washer
M16 x 2 (8.8)
Zinc chromate
30 times of test
Fcon
Fluctuating coefficient
Average torque coefficient
Machine oil
Lubricant
Average Torque coefficient
Bolt Tension
Stabilization
Other
Characteristic of axial tension stabilization
Torque coefficient calculated by formula K = t/(d x f)
T = tightening torque, d = nominal size of screw,
F = axial tension
Torque fluctuating coefficient =
torque coefficient standard deviation/average torque coefficient
Machine oil
Screw size: M10 x 1.5
Zinc plated chromate
Bearing surface: HRC 40 polished
Axial tension: 30 KN
Number of test: 5
Axial tension 80 KN
Hex bolt, nut, washer
M16 x 2 (8.8)
Zinc chromate
Machine oil
Fcon
Tightening speed (r.p.m)
Influence of tightening speed on torque coefficient
Force Measurement
Instrument
Fcon
Influence of Temperature
Torque coefficient
Influence of Tightening Speed
Torque coefficient
Fcon
Tightening operation temperature (°C)
Influence of temperature on torque coefficient
53
TT2000
Ultrasonic Tension
Meter
Digital
Direct Reading
• Non-destructive axial bolt tension tester
• Input information regarding fastener & materials
• Sound wave lengths are measured and compared.
Model
TT2000
TT2000C
TT2000M
TT2000 Specifications
TT2000
Measuring Range
Applicable Length of Bolt
Applicable Nominal Diameter of Bolt
Ultrasonic Wave Frequency
Time Axis Resolusion
Result of Measurement
Measuring Resolution
Memory Capacity of Data
Bolt Temperature Correction
Display
External Output
Power Supply
Optional Battery
Temperature of Use
Dimensions
Weight
1. Optional thermometer can be connected to TT2000C and TT2000M for auto temperature adjustment
Input temperature range is from -40˚C to 200˚C. Measurement over 60˚C requires a sensor specially
designed for high temperature.
2. RS232C connector is available only with TT2000C and TT2000M.
3. Composite output, alarm output and encoder input are available only when using a multi connector box
(TT2000M) or optional built-in battery case.
4. DC12V can be used only when using the optional portable battery or the built-in battery case.
Note
Sensor
5-10,000mm (Steel material)
50-9,000mm
φ6mm dia or more (Applicable for less than φ6mm dia. with an optional sensor)
0.5-15 MHz
5ns
Bolt initial length (mm), Stress (Mpa), Elongation (mm), Propagation rate (μs)
Depends on bolt diameter and length
[Ex.] Based on the first echo measurement (steel material)
Bolt diameter φ10, Bolt tightening length 50mm ±approx. 1.47kN
Bolt diameter φ20, Bolt tightening length 100mm ± approx. 2.94kN
2,000pcs. or time pass measurement 300 items (Max. 50 kinds of different bolts can be registered)
Manual input by key, Auto temperature input *1
Color TFT6.4 type (640 × 480dots)
8 bits serial interface (RS232C) *2
Composit output (NTSC), Alarm output (photo coupler), Encorder input *3
AC85-130V, AC185-265V (50/60Hz) or DC12V *4
Portable: 2.5h use for 1.5h Charge Built -in case: 8h use for 4.5h charge
0-45 Celsius
Body: H160 × W246 × D60mm Body + Built-in battery: H160 × W246 × D246mm
Body: 1.2kg Body + built-in battery:4.9kg
Magnet Holder
Bolt Holder
TT2000 Optional Accessories
Model Name
RS232C Junction Cable A
Portable Battery Cable
RS232C Junction Cable B
Battery Built-in Body
Handy Type Cover
Portable Type Cover
TT2000 Carring Case
Portable Battery Pack
Light Shielding Hood
Carring Case for Body with Battery Built-in Body
Axial Tension Calibrator
Model
AFC-20G
Ultrasonic Sensor
Part #
606
607
608
609
Force Measurement
Instrument
Note
54
Name
5C4.8N
5C6.4N
5C12.7N
5C19.1N
Applicable Bolts
More than M6, L1<approx.80mm
More than M8, L1<approx.50cm
More than M14, L1<approx.2m
More than M20, L1<approx.4m
1. L1 is standard bolt length with material in SCM, S-C, SS for ultrasonic wave reflection measurement
n=1.
2. Ultrasonic wave sensor is consisting of 3 parts, Sensor, Magnet Holder and Bolt Holder.
3. Standard 5C6. 4N does not include bolt holder.
4. 5C6.4N=[5: Frequency (MHZ)]
[C: Oscillator Material (C: piezoelectric ceramics)]
[6.4: Oscillator Diameter, mm]
[N: Perpendicular (Normal)]
Features of ultrasonic wave sensor
1. The magnetic holder provides stabilized force through the sensor, which provides high repeatability
measurement.
2. The bolt holder gives same position of the sensor to support more accurate measurement.
FP
Force Pen
Voltage Output
Pen
• Pen style force sensor
• Compact, lightweight, user friendly operation
• Requires CD42 Compact Display
Model
Measurement
Range
FP1
[N]
±0.1-1
FP2
±0.2-2
FP4
±0.4-4
FP10
FP20
±1-10
±2-20
FP40
Rated Output
1mV/V
Accuracy
±1% F.S.
Allowable
Overload
150%
Display
Weight
(Option)
[g]
CD42
80
±4-40
1. CD42 (Display) is optional.
2. FP models are supplied upon request.
Note
Standard Accessories Standard Attachment
CD42
FG Force Grip
Voltage Output
Grip
• Grip style force sensor
• For large product testing
• Requires CD42 Compact Display
Model
Measurement
Range
Rated Output
Accuracy
[N]
FG100
FG40
FG100
±4-40
±10-100
FG200
FG400
±20-200
±40-400
2mV/V
±1% F.S.
Allowable
Overload
150%
Display
Weight
(Option)
[g]
CD42
580
1. CD42 (Display) is optional.
2. FG models are supplied upon request.
Note
Standard Accessories Standard Attachment
CD42
RPTM Rope Tension Meter
Beam
Direct Reading
• Wire cable torque meter
• Measure tension on intertwined cables
• One touch operation
Accuracy ±10％
RPTM2500
RPTM5000
RPTM10000
RPTM20000
Note
Min.-Max.
500-2500
1000-5000
2000-10000
4000-20000
Grad.
100
200
500
Metric
Model
RPTM250
RPTM500
RPTM1000
RPTM2000
Measurement Range
[kgf]
Min.-Max.
50-250
100-500
200-1000
400-2000
Grad.
10
20
50
Overall
Length
[mm]
375
445
535
700
Diameter of Wire
or Rope
[mm]
3.15, 4, 5
5, 6.3
8, 9, 10
11.2, 12.5, 14
1. Consult Tohnichi if you intend to apply this model for anything other than a steel wire.
2. RPTM models are supplied upon request.
Weight
[kg]
0.7
1.1
1.7
2.9
Force Measurement
Instrument
S.I. Model
RPTM2500
Measurement Range
[N]
55
Optional Equipment
CD42
Compact Display
Digital
Sensor Contacts
Direct Reading
Comparator
Judgment
• Digital display for torque equipment
• Shows torque values from strain gauges
• Judgment functions
Model
CD42
CD42 Optional Accessories
Printer
Model
CD42 Specifications
Display
Resolution
Input Signal
5 digits, Fluorescent display tube
±1/2000
0.5-3mV/V
Input Voltage
DC 5V
Non-linearity 0.05%/F.S.
EPP16M2
Accuracy
Data Filing System
CD42
Model
Media
DFS
CD-ROM
Connecting Cable
Part #
Applicable Models
380
561
CD42 ➝ EPP16M2
CD42 ➝ PC (D-SUB 9 Pin Female)
connector shapes.
Note
R-DT999
Data Tank
Auxiliary
Infrared Input
Zero drift: within 0.5μ v/˚C
Gain drift: within 0.01%/˚C
Digital gain adjustment
Gain Adjustment
(1) Equivalent input calibration
(2) Actual loading calibration
Data Memory
99 data
External Output
RS232C output, Analog outpout
HI, OK, LO (Relay signal output)
Power
Temparature in Use
AC100-AC240V
0-40 Celsius
Dimension
Weight
W150 x D200 x H94mm
1.7kg
RS232C Data Output
• Infrared data collector for torque equipment
• 999 data storage
• External keypad setup functions
Model
R-DT999
R-DT999 Specifications
R-DT999 Optional Accessories
Data Input
Display
Printer
Model
EPP16M2
Applicable Models
Data Output
R-DT999
Power
Dimensions
Data Filing System
Model
DFS
Media
CD-ROM
Infrared data input (Tohnichi format only)
6 digits, 14segments LCD
4 digits, 7segments LCD
4 digits, 7segments LED
CEM3, CEM2, ST, ST2, STC, CTA, CTB, ST2
RS232C compliance,
USB connector serial output (*USB 1.1)
DC5V 2A
W80 x D125 x H32mm
AC adapter (100-240V±10%)
Operating Temperature Range 0-40 Celsius
Weight
205g (body only)
Connecting Cable
Part #
379
575
584
2. Consult Tohnichi for other types of connector shapes.
Note
DFS
Data Filing System
(CD-ROM)
Applicable Models
CEM2, CEM3, R-DT999 ➝ EPP16M2
CEM2, CEM3, R-DT999 ➝ PC (D-SUB 10 Pin Female)
R-DT999 ➝ PC (USB A type)
Auxiliary
CD
• Data processing software
• Statistics, Standard deviation, Cp values, Charts
Model
DFS
ST2
CEM3
TME2
CD42
Connecting Cable to PC
Part #
575
561
579
584
383
DFS
Maximum value, minimum value, data
range, mean value, standard deviation
and Cp value are calculated to make a
histogram on the display.
56
Media
CD-ROM
Note
Applicable Models
CEM2, CEM3, CTA2, R-DT999 ➝ PC (D-Sub 9 Pin Female)
DOTE, LC, TDT, TME, TCC ➝ PC (D-Sub 9 Pin Female)
CTB ➝ PC (D-Sub 9 Pin Female)
CEM3, CTA2, R-DT999 ➝ PC (USB A type)
DOTE3-G, LC2-G, TME2 ➝ PC (D-Sub 9 Pin Female)
2. Consult Tohnichi for other types of connector shapes.
3. In case of using with CEM3 models, change its setting into the“CEM2”
communication mode.
Auxiliary
RS232C Data Input
• Printer for digital torque equipment
• Compact dot matrix
EPP16M2 Specifications
Model
EPP16M2
EPP16M2 Optional Accessories
Roll Paper
Part #
Description
408
Roll Paper
Printing Method
Printing Speed
Line Spece
Number of Pringted Digits
Mechanical dot matrix printer
2.5 line/s
3 dot line base
Standard letter 16 (letter/line)
Character Size
Paper
2.6mm (H) x 1.7mm (W)
57.5 mm width roll paper
Ink Ribbon
Ribbon casette type
Dimension
Body 155mm x 145mm x 48mm (W, D, H)
Weight
Approx. 400g (body only)
Operating temperature +5-45 Celsius (no condensation)
Environmental Condition
Ribbon Cassette
Part #
Description
409
Ribbon Cassette
Optional Equipment
EPP16M2 Printer
Storage temperature -10-+70 Celsius (excluding the paper)
Input Signal
Based on RS232C
Standard Accessories AC adapter, Roll paper
Power
AC100V-240V 50/60Hz
EPP16N2
Connecting Cable
Part #
Applicable Models
378
379
CTB ➝ EPP16M2
CEM2, CEM3, CTA2, R-DT999 ➝ EPP16M2
380
DOTE, LC, TDT, TME, CD42, TCC ➝ EPP16M2
381
EPP16M Cord ➝ EPP16M2
DOTE3-G, LC2-G, TDT2-G, TME2 ➝ EPP16M2
382
381 is a conversion cable in order for EPP16M (conventional model) cable to be
used with EPP16M2.
Note
DECA
10:1 Ratio Torque
Multiplier
Body + Universal Arm
Auxiliary
Straight
• Multiplied torque output by 10
• Ideal for applying high torque values with less force
Accuracy ±5%
[N·m]
Output Torque
[kgf·m]
[lbf·ft]
DECA450N
Min.-Max.
90-450
Min.-Max.
9-45
Min.-Max.
65-325
DECA900N
DECA1800N
DECA3000N
180-900
360-1800
600-3000
18-90
36-180
60-300
130-650
260-1300
434-2170
DECA4500N
900-4500
90-450
DECA9000N
DECA18000N
1800-9000
3600-18000
180-900
360-1800
Model
Body
Torque
Ratio
Dimension [mm]
Overall
Length
Dia.
Output
Input
Sq. Drive Sq. Drive
195
52
541
270
324
63
78
95
31.75
650-3250
367
110
38.1
1300-6500
2600-13000
464
540
140
172
50.8
63.5
10:1
Weight
[kg]
Applicable
Universal Arm
19.0
9.5
2
UA450N
25.4
12.7
3.4
5.7
UA900N
UA1800N
19.0
10
12.5
UA3000N
UA4500N
25.4
34
60
UA9000N
UA18000N
1. Universal Arm is optional.
2. DECA900N and DECA1800N are supplied upon request.
Note
DECA900N
Rotary
Universal Arm
Standard Accessories 1. Metal Case (for DECA450N-DECA900N only)
2. Portable Handle (for DECA4500N-DECA9000N only)
3. Metal Case Caster (for DECA18000N only)
AP/DAP Optional Accessories
SA
UA
Shell Arm
Light weight reaction arm
Model
Standard Socket
Length [mm]
Max. Torque
[N.m]
SA400N
SA700N
SA1200N
50
62
62
400
700
1200
SA
Model
UA450N
UA900N
UA1800N
UA3000N
UA4500N
UA9000N
UA18000N
Universal Arm
Heavy duty reaction arm
Max. Torque [N.m]
450
900
1800
3000
4500
9000
18000
Weight [kg]
1.2
2.6
4
7.2
10.9
18
-
UA
EVERTORQUE
Lubricant for repairing
torque products
• For repairs of torque wrenches and torque screwdrivers
Model
EVERTORQUE
Part #
830
Evertorque Application List
Applicable Model
QL/QLE/CLE/PQL/PCL/YCL
Click Type Torque Wrench
WQL
MPQL
RTD, RNTD
Click Type Torque Screwdriver
RTD, LTD, BMLD
Semi-Automatic Airtork
A/AC
AP, AS
Fully-Automatic Electric Nutrunner
DAP
Multiple Unit
MC, ME, DCME
Applicable Part
Thrustring; Steel Ball, Scale Piece, Adjusting Screw; Thread
Thrustring; Steel Ball, Scale Piece, Adjusting Screw; Thread, Knob, Protecter; Joint
Thrustring; Steel Ball, Scale Piece, Adjusting Screw; Thread, Ratchet, Marker Pipe; Joint
Main Shaft, Toggle Sheet; Serration
Case, Adjusting Piec; Serration
Thrustring; Steel Ball, Scale Piece, Adjusting Screw; Thread
Reduction Clutch; Clutch
57
Torque Settings for Torque Screwdrivers
Technical Data
■ LTD, RTD, MLD
Method of setting torque (Adjustable type) :
1. Turn the locker of the main unit clockwise to release the lock.
2. Holding the main scale knurling part with the fingers of your right
hand, turn the grip with the fingers of your left hand to set the
torque value.
* Setting the torque set values:
(1) Turn the grip to match the top end of the supplemental
graduation with the main scale.
(2) Match the supplemental graduation line with the main scale
vertical line (See the figure below).
3. After setting the torque, turn the main unit locker
counterclockwise to lock it.
%LW
Coupler
.QXUOLQJ
6FDOHSODWH
120
100
110
90
0DLQVFDOH
4 3
6XSSOHPHQWDOJUDGXDWLRQ
2
1 0
/RFNHU
/RFNSRLQW
*ULS
■ NTD, RNTD
([F1ÃP
Coupler
Method of setting torque (Preset type):
1. Holding the grip with your left hand, insert the adjusting tool bar
into the grooves of the adjustment screw and turn to adjust. Turn
clockwise to increase the torque value.
2. Insert with the exclusive bit into the loading device of the Torque
Driver Tester (TDT) and fix it.
3. Turn the loading device clockwise to measure the torque value.
4. Continue to repeat procedures 1-3 until the torque is matched.
%LW
Adjusting Bar
,QFUHDVH
*ULS
$GMXVWLQJVFUHZ
■ FTD50-400CN
Method of preloading the FTD
The preload function is a function that uses the handle to apply a
preloading torque close to that of the measuring point to minimize
the twisting angle during measurement.
In the FTD series torque screwdrivers, a preload function is
provided to prevent your wrist from becoming strained and the
torque scale from becoming difficult to read when operating close
to the maximum torque.
1. Holding the FTD screwdriver with your left hand, turn the
preload handle in the counterclockwise direction using the
fingers of your right hand (in case of clockwise measuring).
2. After some slipping turns, the needle will begin to move, and it
will be easy to set an optional torque value.
3. If you do not wish to use the preload function, turn the preload
handle until there is no tension and the central set indicator (red
mark) points to the FREE mark.
*ULS
6FDOHSODWH
1HHGOH
R
L
FREE
6HWLQGLFDWRU
■ FTD-S
Method of setting the FTD-S indicator and memory pointer
1. Make sure the indicator is pointing to zero by matching the scale.
If not, adjust to zero by lightly pushing down on the scale and
rotating it.
2. Turn the memory pointer in the direction opposite to the
measuring direction until it matches the main indicator.
3. Carry out torque measurement or torque tightening.
58
+DQGOH
0HPRU\SRLQWHU
1HHGOH
/
R
F
N
Torque Settings for Torque Wrenches
ZLQGRZ
0DLQVFDOHZLQGRZ
Down
LOCK
N･m
Up
0DLQVFDOH
%DVLFOLQH
6XSSOHPHQWDO
JUDGXDWLRQ
6SULQJSLQ
● QLE, CLE, DQLE, etc.
1. Insert the adjusting tool supplied as a standard accessory.
2. Set the torque by turning the supplemental graduation with the adjusting tool, confirming the value on the main scale.
3. No locking mechanism is needed for QLE models.
ZLQGRZ
'RZQ
0DLQVFDOHZLQGRZ
20
6XSSOHPHQWDO
JUDGXDWLRQ
0DLQVFDOHZLQGRZ
Down
● PQL, PCL, AC, QSP3, etc.
1. Insert the provided hexagon key into the adjusting hexagonal hole.
2. Turn the hexagon key to set the torque, confirming the value on the
main scale and supplemental graduation.
3. N
o locking mechanism is needed for PQL models (An adjusting tool
for QSP3 is optional).
Model
Adjusting hexagon hole mm size across flats
PQL6N4-PQL25N
2.5
PQL50N-200N4
AC25N-100N
%DVLFOLQH
0
500
N･m
Up
6XSSOHPHQWDO
JUDGXDWLRQ
+H[DJRQNH\
4
0
50
0
50
● DB, CDB, T
1. F
or measurement
The scale on the dial gauge can be rotated. Press the dial case from above
and turn the pointer to correctly match “0”.
2. Presetting exclusively for tightening
Alternatively, the desired torque can be preset on the dial beforehand and
then the bolt can be tightened until the pointer shows “0”.
50
■ Dial Indication types
6XSSOHPHQWDOJUDGXDWLRQZLQGRZ
700
■ Pre-lock and preset types
$GMXVWLQJWRRO
600
500
600
700
([WHQVLRQKDQGOH
8S
N･m
%DVLFOLQH
Technical Data
20
40
● QL, CL, YCL, A, etc.
1. Release the locker (Turn it counterclockwise).
2. Set the torque by turning the supplemental graduation,
confirming the value of the main scale.
3. Turn the locker clockwise to lock it. (Change the locker pin
location if the pin is contacted when locking.)
/RFNHU
0
■ Adjustable type
Glass plate
59
Torque Conversion List
kgf·cm
kgf·m
N·m
1 kgf·cm = 0.0980665 N·m
1 kgf·m = 9.80665 N·m
kgf·cm
kgf·m
N·m
1 N·m = 10.1972 kgf·cm
1 N·m = 0.101972 kgf·m
Technical Data
N·m
kgf·cm
kgf·cm
0
1
2
3
4
5
6
7
8
9
N·m
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
10
0.981
1.08
1.18
1.27
1.37
1.47
1.57
1.67
1.77
1.86
1
10.2
11.2
12.2
13.3
14.3
15.3
16.3
17.3
18.4
19.4
20
1.96
2.06
2.16
2.26
2.35
2.45
2.55
2.65
2.75
2.84
2
20.4
21.4
22.4
23.5
24.5
25.5
26.5
27.5
28.6
29.6
30
2.94
3.04
3.14
3.24
3.33
3.43
3.53
3.63
3.73
3.82
3
30.6
31.6
32.6
33.7
34.7
35.7
36.7
37.7
38.7
39.8
40
3.92
4.02
4.12
4.22
4.31
4.41
4.51
4.61
4.71
4.81
4
40.8
41.8
42.8
43.8
44.9
45.9
46.9
47.9
48.9
50.0
50
4.90
5.00
5.10
5.20
5.30
5.39
5.49
5.59
5.69
5.79
5
51.0
52.0
53.0
54.0
55.1
56.1
57.1
58.1
59.1
60.2
60
5.88
5.98
6.08
6.18
6.28
6.37
6.47
6.57
6.67
6.77
6
61.2
62.2
63.2
64.2
65.3
66.3
67.3
68.3
69.3
70.4
70
6.86
6.96
7.06
7.16
7.26
7.35
7.45
7.55
7.65
7.75
7
71.4
72.4
73.4
74.4
75.5
76.5
77.5
78.5
79.5
80.6
90.8
80
7.85
7.94
8.04
8.14
8.24
8.34
8.43
8.53
8.63
8.73
8
81.6
82.6
83.6
84.6
85.7
86.7
87.7
88.7
89.7
90
8.83
8.92
9.02
9.12
9.22
9.32
9.41
9.51
9.61
9.71
9
91.8
92.8
93.8
94.8
95.9
96.9
97.9
98.9
99.9
101
100
9.81
9.90
10.0
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10
102
103
104
105
106
107
108
109
110
111
kgf·cm
0
10
20
30
40
50
60
70
80
90
N·m
0
1
2
3
4
5
6
7
8
9
100
9.81
10.8
11.8
12.7
13.7
14.7
15.7
16.7
17.7
18.6
10
1.02
1.12
1.22
1.33
1.43
1.53
1.63
1.73
1.84
1.94
N·m
kgf·m
200
19.6
20.6
21.6
22.6
23.5
24.5
25.5
26.5
27.5
28.4
20
2.04
2.14
2.24
2.35
2.45
2.55
2.65
2.75
2.86
2.96
300
29.4
30.4
31.4
32.4
33.3
34.3
35.3
36.3
37.3
38.2
30
3.06
3.16
3.26
3.37
3.47
3.57
3.67
3.77
3.87
3.98
400
39.2
40.2
41.2
42.2
43.1
44.1
45.1
46.1
47.1
48.1
40
4.08
4.18
4.28
4.38
4.49
4.59
4.69
4.79
4.89
5.00
500
49.0
50.0
51.0
52.0
53.0
53.9
54.9
55.9
56.9
57.9
50
5.10
5.20
5.30
5.40
5.51
5.61
5.71
5.81
5.91
6.02
600
58.8
59.8
60.8
61.8
62.8
63.7
64.7
65.7
66.7
67.7
60
6.12
6.22
6.32
6.42
6.53
6.63
6.73
6.83
6.93
7.04
700
68.6
69.6
70.6
71.6
72.6
73.5
74.5
75.5
76.5
77.5
70
7.14
7.24
7.34
7.44
7.55
7.65
7.75
7.85
7.95
8.06
800
78.5
79.4
80.4
81.4
82.4
83.4
84.3
85.3
86.3
87.3
80
8.16
8.26
8.36
8.46
8.57
8.67
8.77
8.87
8.97
9.08
900
88.3
89.2
90.2
91.2
92.2
93.2
94.1
95.1
96.1
97.1
90
9.18
9.28
9.38
9.48
9.59
9.69
9.79
9.89
9.99
10.1
1000
98.1
99.0
100
101
102
103
104
105
106
107
100
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
11.1
kgf·m
0
1
2
3
4
5
6
7
8
9
N·m
0
10
20
30
40
50
60
70
80
90
10
98.1
108
118
127
137
147
157
167
177
186
100
10.2
11.2
12.2
13.3
14.3
15.3
16.3
17.3
18.4
19.4
N·m
kgf·m
20
196
206
216
226
235
245
255
265
275
284
200
20.4
21.4
22.4
23.5
24.5
25.5
26.5
27.5
28.6
29.6
30
294
304
314
324
333
343
353
363
373
382
300
30.6
31.6
32.6
33.7
34.7
35.7
36.7
37.7
38.7
39.8
40
392
402
412
422
431
441
451
461
471
481
400
40.8
41.8
42.8
43.8
44.9
45.9
46.9
47.9
48.9
50.0
50
490
500
510
520
530
539
549
559
569
579
500
51.0
52.0
53.0
54.0
55.1
56.1
57.1
58.1
59.1
60.2
60
588
598
608
618
628
637
647
657
667
677
600
61.2
62.2
63.2
64.2
65.3
66.3
67.3
68.3
69.3
70.4
70
686
696
706
716
726
735
745
755
765
775
700
71.4
72.4
73.4
74.4
75.5
76.5
77.5
78.5
79.5
80.6
90.8
80
785
794
804
814
824
834
843
853
863
873
800
81.6
82.6
83.6
84.6
85.7
86.7
87.7
88.7
89.7
90
883
892
902
912
922
932
941
951
961
971
900
91.8
92.8
93.8
94.8
95.9
96.9
97.9
98.9
99.9
101
100
981
990
1000
1010
1020
1030
1040
1050
1060
1070
1000
102
103
104
105
106
107
108
109
110
111
■ Unit of Torque and Conversion Values
Metric unit system
S.I. unit system
cN·m
N·m
gf·cm
kgf·cm
kgf·m
ozf·in
lbf·in
lbf･ft
1 mN･m =
1
0.10
0.001
10.2
0.0102
0.000102
0.142
0.00885
0.000738
1 cN･m =
10
1
0.01
102
0.102
0.00102
1.42
0.0885
0.00738
1 N･m =
1000
100
1
10200
10.2
0.102
142
8.85
0.738
1 gf･cm =
0.0981
0.00981
0.0000981
1
0.001
0.00001
0.0139
0.000868
0.0000723
1 kgf･cm =
98.1
9.81
0.0981
1000
1
0.01
13.9
0.868
0.0723
1 kgf･m =
9810
981
9.81
100000
100
1
1390
86.8
7.23
1 ozf･in =
7.06
0.706
0.00706
72.0
0.072
0.00072
1
0.0625
0.00521
1 lbf･in =
113
11.3
0.113
1150
1.15
0.0115
16
1
0.0833
1 lbf･ft =
1360
136
1.36
13800
13.8
0.138
192
12
1
Country/Region
Japan, China, Europe
Asia
1 [N·m] = 10.1972 [kgf·cm] ≈ 10.20 [kgf·cm]
1 [kgf·cm] = 0.0980665 [N·m] ≈ 0.0981 [N·m] Conversion example:
T = 25·0 [kgf·cm] = 25.0 x 0.0980665 = 2.4516625 [N·m] ≈ 2.45 [N·m]
60
American unit system
mN·m
U.S.A., Aircraft industry
Standard Tightening Torque
Nominal diameter
M1
(M1.1)
M1.2
(M1.4)
M1.6
(M1.8)
M2
(M2.2)
M2.5
M3
(M3.5)
M4
(M4.5)
M5
M6
(M7)
M8
M10
M12
(M14)
M16
M18
M20
(M22)
M24
(M27)
M30
(M33)
M36
(M39)
M42
(M45)
M48
(M52)
M56
(M60)
M64
(M68)
(Reference value)
T
[N·m]
0.5T series
[N·m]
0.0195
0.027
0.037
0.058
0.086
0.128
0.176
0.23
0.36
0.63
1
1.5
2.15
3
5.2
8.4
12.5
24.5
42
68
106
146
204
282
360
520
700
960
1240
1600
2000
2500
2950
3800
4800
5900
7200
8800
0.0098
0.0135
0.0185
0.029
0.043
0.064
0.088
0.116
0.18
0.315
0.5
0.75
1.08
1.5
2.6
4.2
6.2
12.5
21
34
53
73
102
140
180
260
350
480
620
800
1000
1260
1500
1900
2400
2950
3600
4400
1.8T series
[N.m]
0.035
0.049
0.066
0.104
0.156
0.23
0.315
0.41
0.65
1.14
1.8
2.7
3.9
5.4
9.2
15
22
44
76
122
190
270
370
500
650
940
1260
1750
2250
2900
3600
4500
5300
6800
8600
10600
13000
16000
2.4T series
[N.m]
Standard bolt stress: 210 [ N/mm2 ]　Stress area of bolt (JIS B 1082)
0.047
0.065
0.088
0.140
0.206
0.305
0.42
0.55
0.86
1.50
2.40
3.6
5.2
7.2
12.2
20.0
29.5
59
100
166
255
350
490
670
860
1240
1700
2300
3000
3800
4800
6000
7000
9200
11600
14000
17500
21000
Standard tightening torque [kgf·cm]
Nominal diameter
M1
(M1.1)
M1.2
(M1.4)
M1.6
(M1.8)
M2
(M2.2)
M2.5
M3
(M3.5)
M4
(M4.5)
M5
M6
(M7)
M8
M10
M12
(M14)
M16
M18
M20
(M22)
M24
(M27)
M30
(M33)
M36
(M39)
M42
(M45)
M48
(M52)
M56
(M60)
M64
(M68)
T
[kgf.cm]
0.199
0.275
0.377
0.591
0.877
1.31
1.79
2.35
3.67
6.42
10.2
15.3
21.9
29.4
53.0
85.7
127
250
428
693
1080
1490
2080
2880
3670
5300
7140
9790
12600
16300
20400
25500
30100
38700
48900
60200
73400
89700
(Reference value)
0.5T series
[kgf.cm]
1.8T series
[kgf.cm]
0.100
0.138
0.189
0.296
0.438
0.653
0.897
1.17
1.84
3.21
5.1
7.6
11.0
14.7
26.5
42.8
63.2
127
214
347
540
744
1040
1430
1840
2650
3570
4890
6320
8160
10200
12800
15300
19400
24500
30100
36700
44900
0.357
0.500
0.673
1.06
1.59
2.35
3.21
4.18
6.63
11.6
18.4
27.5
39.8
53.0
93.8
153
224
449
775
1240
1940
2750
3770
5100
6630
9590
12800
17800
22900
29600
36700
45900
54000
69300
87700
108000
133000
163000
2.4T series
[kgf.cm]
0.479
0.663
0.897
1.43
2.10
3.11
4.28
5.61
8.77
15.3
24.5
36.7
53.0
70.6
124
204
301
602
1020
1690
2600
3570
5000
6830
8770
12600
17300
23500
30600
38700
48900
61200
71400
93800
118000
143000
178000
214000
Technical Data
Standard tightening torque [N·m]
Note: Conversion values rolled up to effective 3-digits.
■ Screws and Applicable “T” Series
Applicable screws
(Strengths) (Material)
Axial tension standard value
[N/mm2] Min - Max
Application
Applicable products
Standard T series
4.6-6.8
SS, SC, SUS
210
300-160
To be applied to ordinary
screws, unless otherwise
specified
Ordinary products
0.5T series
Brass, Copper, Aluminum
105
150-80
Male and female screws with
copper, aluminum or plastic,
for die-cast plastic products
1.8T series
8.8-12.9
SCr, SNC, SCM
380
540-290
2.4T series
10.9-12.9
SCr, SNC, SCM, SNCM
500
710-380
Durable screw joints made of special steel including those
affected by additional dynamic loads (Friction clamping)
Electronic products
Vehicles, Engines
Construction products
* The maximum to the minimum of the axial stress is considered as the dispersion of the torque coefficient.
Example: max = 210 × (0.2/0.14) = 300 [N/mm2]
Torque coefficient: 0.14 (minimum) - 0.2 (average) - 0.26 (maximum)
Calibration Certificate
● Torque wrenches are measuring instruments. The calibration certificate is the document which certifies the
accuracy of the torque wrenches, which are traceable to Japanese national standards. Please keep the
calibration certificate for future use.
● Accuracy “%” is calculated on each scale reading or preset value. Only if marked “F.S.” then calculation is
based on the full scale value.
● Tohnichi torque wrenches with a calibration certificate can immediately be used even at ISO9000 plants without
acceptance inspection and request of certificate.
● The calibration certificate is effective for 3 years from the date of inspection or 1 year from the date first used.
Therefore, please fill the date in the calibration certificate when first used.
● Manual torque tools are normally guaranteed to 100,000 cycles or 1 year. It can be also used up to 1,000,000
cycles if the function is properly maintained and adjusted at every 100,000 cycles.
61

Tonichi Product Catalog

Transcription

Similar documents

Program

13th Official Program