Platform Chart

STANDARD EMBOSSING FOLDERS
Position material inside the
embossing folder.
Position the embossing folder
between platforms ‘A’ & ‘C’.
Stack the combination
onto platform ‘D’.
Keeping the platform combination
straight, guide into the eBosser
with steady forward motion.
Release when the rollers begin
pulling the platform combination
into the machine.
Remove the combination
once the motor stops running.
Tip:
For best results,
experiment with scrap
Tip: Use both sides of the
platforms
to
prevent
warping.
Platform A
Embossing Folder
+ Material
Platform C
Platform D
USING OTHER BRANDS
Platform A
Material
Cutting Die
Platform C
Platform D
Cuttlebug/Ellison Sizzlits
Cutting Dies
Platform A
Material
Cutting Die
Shim
Platform C
Platform B
Platform D
Spellbinders/Cheery Lynn/Lifestyle Crafts/Stampin’ Up!
Thin Metal Cutting Dies
*Shim E & the Magnetic Shim Are Interchangable
Platform A
Rubber Mat
Material
Cutting Die
Platform C
Platform B
Platform D
Thin Metal Embossing Dies*
*Up To 0.85mm Dies
*Shim E & the Magnetic Shim Are Interchangable
Platform A
Material
Cutting Die
Platform C
Stampin’ Up! Sizzix Dies
USING OTHER BRANDS
Platform A
Material
Cutting Die
Platform C
Sizzix
Cutting Dies
Platform A
Cutting Die
Platform C
Sizzix
Movers & Shapers
Platform A
Material
Cutting Die
Platform A
AccuCut Wood Dies
*Does Not Require Base Platforms
Platform A
Material
Cutting Die
Platform D
AccuCut Go Dies
Platform C
Platform B
Rubber Mat
Material
Embossing Plate
Magnetic Shim
or Shim E
Platform D
Fiskar Fuse Embossing Plate*
(removed from cutting tray)
*Shim E & the Magnetic Shim Are Interchangable
*If the embossing is too pronounced, you may remove Shim E/Magnetic Shim to soften the embossing.
USING OTHER BRANDS
Platform A
Material
Cutting Die
Platform A
Platform A
Platform A
Fiskars Fuse
Cutting Dies
Platform C
Embossing Folder
+ Material
Platform B
Shim
Platform D
Spellbinders M-Bossibilities
Embossing Folders
*Shim E & the Magnetic Shim Are Interchangable
Platform A
Lifestyle
Letterpress
Platform A
Platform A
Lifestyle Crafts Letterpress
Platform A
Embossing Folder
+ Material
Platform C
Cuttlebug All in One Folders
IMPORTANT:
Please adhere to the combination charts provided for each brand.
If you do not see a certain brand listed, please contact Craftwell
Customer Support for further information.
Email: [email protected] Phone: 888-315-8885
Inserting the incorrect platform combination may damage your machine and void your warranty.