OSTO

OSTER SUPERIOR THREADING OIL
TM
INCREASED DIE LIFE • PERFECT THREADS • EASIER THREADING • GUARANTEED SATISFACTION
Don’t Be Fooled By Inferior Products!
Many products claim to be the ultimate in cutting fluids but don’t be fooled. Radial thread-cutting is not your run of
the mill operation. Because our machines are so simple to operate it’s sometimes easy to forget about the complex
forces involved in radial thread-cutting. Water soluble cutting solutions will not work and neither will those
funky new clear “oils” you might see on the shelf at elsewhere. A heavy-duty operation requires a heavy-duty cutting fluid. For quality threads and longer die life always use “OSTO.” Call your distributor TODAY!
2.5 Gallons
No. 95102
5 Gallons
No. 95105
55 Gallons
No. 95155
... INCREASES DIE LIFE. By enabling you to use your threading dies longer, with fewer grinds, it
puts money in your pocket.
... INSURES PERFECT THREADS. You get sharp, clean-cut — threads, every time, when you use
“OSTO.”
... PREVENTS CHIP WELDING. Our special formula insures proper metal film lubrication and prevents chip waste from fusing to the tooling surface and preventing tool breakage.
... CLING IS KING. Formulated to have a vice-like grip on the work material our oil insures that the
cutting surface is always lubricated and all tooling is saturated.
The Purpose of Cutting Oil
The purpose of a good cutting oil is two fold: (1) To
prevent chip welding and in turn prevent breaking teeth
on valuable tooling and (2) to penetrate the pores of
the pipe or metal and cool the cutting teeth of the dies
or cutting edge of the tool while they are embedded in
the work. Oster’s Superior Threading Oil accomplishes
both in the most efficient manner. It is a carefully compounded oil containing sulphur & chlorinated parafins
held in permanent suspension. These chemicals in
proper concentration work to both cool the work and
to create metal film lubrication to reduce welding.
“OSTO” will outperform any synthetic because it has
anti chip welding agents and better adhesion to the
material surface. The sulphur content of “OSTO” never
varies because it is held in perfect chemical combination.
• “OSTO” can be used on stainless steel.
• “OSTO” is highly recommended for drilling, tap•
ping, cutting and many other machining operations.
“OSTO” contains NO carcinogenic agents.
WWW.OSTERMFG.COM — CALL 888-416-7837
“R A P I D U CT I O N ”
792ALX - Bolt & Pipe Master
Elecectronic Controls - No transmissions or gear changes necessary, easy RPM changes at the turn of a knob.
Rotating X-1 Diehead - Diehead turns so material stays still and operators stay safe. Never have to start and stop the
spindle to change work pieces creating dramatic time savings.
Vise Carriage - Quick-acting open type vise with replaceable hardened steel insert jaws
Automatic Stock Stop - Guarantees repeatable thread lengths and automatically moves recedes when threading.
Adjustable Automatic Thread Length - Easy to change Adjustable stop automatically opens the diehead and the desired
length for Pipe & Bolt
Removable Chip Tray - Allows for easy collection and remooval of chips while keeping sump and pump clean of debris.
Coolant Pump - Electrically driven pump, independent from motor pumps regardless of spindle direction.
Bolt Threading Time Study
Bolts or Studs of screw stock with one inch of National Coarse thread cut on one end. Head turning at reccomended
speed, measured in pieces per hour.
Bolt Dia.
792ALX
1/4”
3/8”
1/2”
5/8”
3/4”
7/8”
1”
11/8”
11/4”
13/8”
11/2”
220
250
215
180
187
150
157
150
150
145
130
Various Lengths
Bolt Dia./Length
792ALX
1/2” x 13/4” lg.
175
5/8” x 13/4” lg.
180
3/4” x 2” lg.
124