Rheem Gas Furnaces

Transcription

Rheem Gas Furnaces

Pricing Effective: September 2010
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
INDEX
classic® 90 plus®
downflow/horizontal ...................................................................................................................................... 2-3
upflow............................................................................................................................................................................ 2-2
classic® series with dual comfort control™ — two-stage
downflow/horizontal ...................................................................................................................................... 2-6
upflow — 90 plus .................................................................................................................................................... 2-4
upflow — 95% A.F.u.E. ............................................................................................................................................ 2-5
COMBUSTIBLE FLOOR BASEs......................................................................................................................................... 2-8
furnace filter frame matches............................................................................................................................. 2-8
Prestige® series — 90 PLUS®...................................................................................................................................... 2-7
TERMINATION KITs............................................................................................................................................................. 2-8
technical information............................................................................................................................... 2-9 – 2-22
Available in Northern Alberta, Saskatchewan and Manitoba.
ECCO is proud to be a member of:
HRAI
Heating, Refrigeration and
Air Conditioning
Institute of Canada
www.hrai.ca
ECCO Supply
HARDI
Heating, Air-conditioning
& Refrigeration
Distributors International
www.hardinet.org
SMACNA
Sheet Metal and Air
Conditioning Contractors’
National Association
www.smacna.org
SPIDA
Spiral Duct
Manufacturers
Association
www.spida.org
CIPH
Canadian Institute
of Plumbing &
Heating
www.ciph.com
www.eccosupply.ca 2-1
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
classic® 90 plus® high efficiency upflow gas furnaces
rgra-/rgrb-series
models with input rates from 45,000 to 120,000 btu/hr
[13.19 to 35.17kW]
(All Models 90% A.F.U.E. or Above)
Features:
• Heat exchanger is constructed of all stainless steel for maximum corrosion
resistance and thermal fatigue reliability.
• Low profile “34 inch” design is lighter and easier to handle and leaves room
for optional accessories.
• Left or right side gas, electric, and condensate drainage connections on upflow models.
• Integrated control board manages all operational functions and provides hookups for
humidifier and electronic air cleaner.
• An insulated blower compartment, a slow-opening gas valve and a specially designed
inducer system make it one of the quietest furnaces on the market today.
• Pre-paint galvanized steel cabinet.
• Molded permanent filters.
• Optional indoor or outdoor combustion air. In addition, combustion air may be piped
to either the top or side of the cabinet on all upflow models. A special molded fitting
is provided to ease installation.
• Transformer and control fuse protection.
• Solid bottom is standard.
• Control board diagnostics.
A variety of cooling coils and plenums designed to use with the Classic 90 Plus gas furnaces
are available as optional accessories for air conditioning models.
Stock #
885214
885216
885217
885219
885220
885222
Model
RGRA-04EMAES
RGRA-06EMAES
RGRB-07EMAES
RGRA-09EZAJS
RGRA-10EZAJS
RGRA-12ERAJS
input
BTU/HR [kW]
45,000 [13.19]
60,000 [17.58]
75,000 [21.98]
90,000 [26.38]
105,000 [30.77]
120,000 [35.17]
Heating
hEATING CFM@ .2" coolING CFM@ .5"
Capacity/
[.049 kPa] WC
[.124 kPa] WC
BTU/HR [kW]
ESP [L/s]
ESP [L/s]
42,000 [12.31]
885 [417]
1195 [564]
56,000 [16.41]
845 [398]
1100 [519]
70,000 [20.51]
1050 [495]
1110 [524]
84,000 [24.62]
1465 [691]
1910 [901]
97,000 [28.43]
1445 [682]
1810 [854]
113,000 [33.12]
1580 [745]
1900 [897]
APPROX
shp wt/
LBS [kg]
111 [50.3]
117 [53.1]
124 [56.2]
148 [67.1]
152 [68.9]
160 [72.6]
Price
P.O.A.
P.O.A.
P.O.A.
P.O.A.
P.O.A.
P.O.A.
[ ] Designates Metric Conversions
Note: For Technical Data, see end of section.
General Terms of Limited Warranty
Rheem will furnish a replacement for any part of this product which fails in normal use and service
within the applicable period stated, in accordance with the terms of the limited warranty.
Primary and Secondary Heat Exchanger…………Limited Lifetime
*Any other part……………………………………Five (5) Years
*This five year limited warranty is applicable only to single-phase
products installed in residential applications on or after January 1, 2001.
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice – All Taxes Extra – May not be Available at All Branches –
2-2 www.eccosupply.ca
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
classic® 90 plus® high efficiency
downflow/horizontal gas furnaces
rgta-series
Models with input rates from 45,000 to 120,000 btu/hr
[13.19 to 35.17kW]
Features:
• Low profile “34 inch” design is lighter and easier to handle and leaves room
for optional accessories.
• Top electrical connections, left or right gas and condensate drainage
connections on downflow models.
• Condensate drain for horizontal application provided standard.
• Integrated control board manages all operational functions and provides
hookups for humidifier and electronic air cleaner.
• An insulated blower compartment, a slow-opening gas valve and a specially
designed inducer system make it one of the quietest furnaces on the market today.
• Pre-paint galvanized steel cabinet.
• Optional indoor or outdoor combustion air.
• Transformer and control fuse protection.
A variety of cooling coils and plenums designed to use with the Classic 90 Plus gas furnaces
ITEM #
885327
885328
885330
C885000
885331
885333
Model
RGTA-04EMAES
RGTA-06EMAES
RGTA-07EMAES
RGTA-09EZAJS
RGTA-10EZAJS
RGTA-12ERAJS
input
BTU/HR [kW]
45,000 [13.19]
60,000 [17.58]
75,000 [21.98]
90,000 [26.38]
105,000 [30.77]
120,000 [35.17]
Heating
Capacity/
[.049 kPa] WC
[.124 kPa] WC
BTU/HR [kW]
ESP [L/s]
ESP [L/s]
41,000 [12.02]
890 [420]
1220 [576]
56,000 [16.41]
885 [418]
1180 [557]
69,000 [20.22]
1060 [500]
1150 [543]
84,000 [24.62]
1400 [661]
1850 [873]
97,000 [28.43]
1425 [673]
1820 [859]
112,000 [32.82]
1565 [739]
2040 [963]
APPROX
shp wt/
LBS [kg]
111 [50.3]
117 [53.1]
123 [55.8]
148 [67.1]
152 [68.9]
160 [72.6]
Price
P.O.A.
P.O.A.
P.O.A.
P.O.A.
P.O.A.
P.O.A.
Note: For Technical Data, see end of section.
*Any other part……………………………………Five (5) Years
*This five year limited warranty is applicable only to single-phase
products installed in residential applications on or after January 1, 2001.
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
classic® series 90 plus with dual comfort control
two-stage upflow gas furnaces
rgrl- series
Models with input rates of 45,000 to 105,000 btu/hr
[13.19 to 30.77kW ]
(All models 95% A.F.U.E. or Above)
Features:
• Two stages of operation to save energy and maintain optimal comfort level.
• Furnace operates at 70% capacity for low-heat and 100% capacity for high-heat.
• Compatible with single or two-stage thermostat.
(For optimal performance two-stage thermostat recommended.)
• Heat exchanger is constructed of all stainless steel for maximum
corrosion resistance and thermal fatigue reliability.
• Low profile “34 inch” design is lighter and easier to handle
and leaves room for optional accessories.
• Left or right side gas, electric, and condensate drainage connections.
• Features a Limited Lifetime Warranty on the primary and secondary heat exchanger and
a 10-Year Limited Warranty on all other parts.
to either the top or side of the cabinet on all upflow models. A special molded fitting is
provided to ease installation.
• Dual certified for sealed combustion (2-pipe) or non-direct (1-pipe) applications.
A variety of cooling coils and plenums designed to use with the Rheem Classic® Series 90 Plus
gas furnaces are available as optional accessories for air conditioning models.
ITEM #
885280
885282
885283
885284
C885000
Model
RGRL-04EMAES
RGRL-06EMAES
RGRL-07EMAES
RGRL-09EZAJS
RGRL-10EZAJS
high fire
input
BTU/HR [kW]
45,000 [13.19]
60,000 [17.58]
75,000 [21.98]
90,000 [26.38]
105,000 [30.77]
low fire
input
BTU/HR [kW]
31,500 [9.23]
42,000 [12.31]
52,500 [15.39]
63,000 [18.46]
73,500 [21.40]
[.049 kPa] WC
[.124 kPa] WC
ESP [L/s]
ESP [L/s]
885 [417]
1195 [564]
845 [398]
1100 [519]
1050 [495]
1110 [524]
1465 [691]
1910 [901]
1445 [682]
1810 [854]
APPROX
shp wt/
LBS [kg]
111 [50.3]
117 [53.1]
123 [55.8]
148 [67.1]
152 [69]
Price
P.O.A.
P.O.A.
P.O.A.
P.O.A.
P.O.A.
note: For Technical Data, see end of section. General Terms of Limited Warranty
Conditional Parts Warranty
(Registration Required)……………………… . Ten (10) Years
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
rheem classic® series 95% a.f.u.e. with dual comfort control™
two-stage upflow gas furnaces
rgrM-series
ecm equipped
[13.19 to 35.17kW ]
(45k through 105k Models Rated at 95% A.F.U.E., 120k Model Rated at 93.3% A.F.U.E.)
Features:
• Two stages of operation to save energy and
maintain optimal comfort level.
• Furnace operates at 70% capacity for low-heat and
100% capacity for high-heat.
(For optimal performance two-stage thermostat
recommended.)
• Heat exchanger is constructed of all stainless steel for
maximum corrosion resistance and thermal fatigue
reliability
• Low profile “34 inch” design is lighter and easier to
handle and leaves room for optional accessories.
• Left or right side gas, electric, and condensate
drainage connections
• Integrated control board manages all operational
functions and provides hookups for humidifier and
electronic air cleaner.
• A
n insulated blower compartment, a
slow-opening gas valve and a specially
designed inducer system make it one
of the quietest furnaces on the market
today.
• Variable speed blower motor technology
provides ultimate humidity control, quieter
sound levels and year-round energy savings.
• Molded permanent filters
In addition, combustion air may be piped to
either the top or side of the cabinet on all
upflow models. A special molded fitting is
• Control fuse protection
• Solid bottom is standard
• Control board diagnostics
A variety of cooling coils and plenums designed to use with the Rheem Classic® Series 95% A.F.U.E. gas furnaces
ITEM #
885240
885242
885244
C885000
885248
885250
Model
RGRM-04EMAES
RGRM-06EMAES
RGRM-07EMAES
RGRM-07EYBGS
RGRM-09EZAJS
RGRM-10EZAJS
High fire
input
BTU/HR [kW]
45,000 [13.19]
60,000 [17.58]
75,000 [21.98]
75,000 [21.98]
90,000 [26.38]
105,000 [30.77]
low fire
input
BTU/HR [kW]
31,500 [9.23]
42,000 [12.31]
52,500 [15.39]
52,500 [15.39]
63,000 [18.46]
73,500 [21.60]
high
high
[.049 kPa] WC
[.124 kPa] WC
ESP [L/s]
ESP [L/s]
780 [368]
1200 [566]
900 [425]
1200 [566]
1080 [510]
1200 [566]
1180 [510]
1600 [755]
1450 [684]
2000 [944]
1604 [757]
2000 [944]
approx
shp wt/
lbs [kg]
117 [53.2]
123 [56.0]
128 [58.3]
139 [65.2]
148 [67.5]
150 [68.2]
Price
P.O.A.
P.O.A.
P.O.A.
P.O.A.
P.O.A.
P.O.A.
note: For Technical Data, see end of section.
(Registration Required)…………………………Ten (10) Years
Conditional Unit Replacement Warranty
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
two-stage downflow/horizontal gas furnaces
rgtM-series
ecm equipped
[17.58 to 30.77kW ]
(All Models 95% A.F.U.E., or above)
Features:
• Two stages of operation to save energy and maintain optimal comfort level.
• Furnace operates at 70% capacity for low-heat and 100% capacity for high-heat.
(For optimal performance a two-stage thermostat is recommended.)
• Low profile “34 inch” design is lighter and easier to handle
and leaves room for optional accessories.
• Left or right side gas, electric, and condensate drainage connections.
• Variable speed blower motor technology provides ultimate humidity control, quieter
sound levels and year-round energy savings.
to either the top or side of the cabinet on all downflow models. A special molded fitting is
• Control fuse protection.
A variety of cooling coils and plenums designed to use with the Rheem Classic® Series 95% A.F.U.E. gas furnaces
ITEM #
885286
885288
C885000
885292
Model
RGTM-06EMAES
RGTM-07ERBGS
RGTM-09EZAJS
RGTM-10ERBJS
HIGH FIRE
INPUT
BTU/HR [kW]
60,000 [17.58]
75,000 [21.98]
90,000 [26.38]
105,000 [30.77]
LOW FIRE
INPUT
BTU/HR [kW]
42,000 [12.31]
52,500 [15.39]
63,000 [18.46]
73,500 [21.60]
HIGH hEATING
CFM@ .2"
[.049 kPa] WC
ESP [L/s]
900 [425]
1180 [510]
1450 [684]
1604 [757]
HIGH coolING
CFM@ .8"
[.124 kPa] WC
ESP [L/s]
1200 [566]
1600 [755]
2000 [944]
2000 [944]
Approx
shp wt/
lbs [kg]
123 [56.0]
123 [56.0]
148 [67.5]
165 [75.0]
Price
P.O.A.
P.O.A.
P.O.A.
P.O.A.
Rheem will furnish a replacement for any part of this product which fails in a normal use and service
Conditional Unit Replacement Warranty
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
rheem PRESTIGE® series 90 PLUS® COMMUNICATING MODULATING UPFLOW
GAS FURNACES EQUIPPED WITH THE comfort control2 SYSTEM
AND CONTOUR COMFORT CONTROL®
RGfe-series
[17.58 to 35.16 kW ]
Features:
• The Comfort Control2 System™ provides over 28 on-board
diagnostics and fault history codes by detecting system and
electrical problems. "Call for Service" alert notification is
sent to the thermostat to alert the homeowner of required
service.
• Serial Communication Enhanced – When installed with a
Serial Communicating Condensing Unit and user interface
control (RHC-TST550CMMS) 500 Series thermostat this
unit offers 4 or 2 wire installation, auto-configuration, and
diagnostic messaging with full communicating capability.
• Heat exchanger is constructed of all stainless steel for
maximum corrosion resistance and thermal fatigue
reliability.
• Modulating Function: when used with a modulating or
communicating thermostat, modulation rate between 40%
and 100% of total capacity.
• T
wo-Stage Function: when used
with a two-stage thermostat, furnace
operates at 40% on first stage, and
stages up to 65%, then 100% for second stage.
• Multistage Function: when used with a single-stage
thermostat, furnace operates at 40%, 65% and 100% of
total capacity.
• Reduced firing rates, electrically efficient ECM2+ motor,
and solid doors provide the ultimate in quiet operation.
• Low speed constant fan.
• Constant temperature rise for superior comfort.
• Seven segment LED for system diagnostics.
• Diagnostic history for troubleshooting.
• Two-speed induced draft motor.
• Direct spark ignition with remote sense.
A variety of cooling coils and plenums designed to use with the Prestige Series® 90 Plus gas furnaces are available
as optional accessories.
input-Min.
BTU/HR [kW]
24,000 [7.03]
Heating
CFm max.
WC ESP [L/s]
795 [375]
hEATING
CFM min.
WC ESP [L/s]
320 [151]
885230
input-MAX.
Model
BTU/HR [kW]
RGFE-06EMCK 60,000 [17.58]
885232
RGFE-07EMCK
75,000 [21.98]
30,000 [8.79]
995 [470]
430 [203]
885234
RGFE-09EZCM
90,000 [26.38]
36,000 [10.55]
1195 [564]
515 [243]
885236
RGFE-10EZCM 105,000 [30.77] 42,000 [12.31]
1395 [658]
600 [283]
C885000
RGFE-12ERCM 120,000 [35.17] 48,000 [14.07]
1595 [753]
685 [323]
ITEM #
coolING
CFM range
WC ESP [L/s]
600-1200
[283-566]
600-1200
[283-566]
1200-2000
[566-944]
1200-2000
[566-944]
1200-2000
[566-944]
APPROX
shp wt/
LBS [kg]
127 [57.6]
Price
P.O.A.
133 [60.3]
P.O.A.
158 [71.7]
P.O.A.
162 [73.5]
P.O.A.
170 [77.1]
P.O.A.
Primary and Secondary Heat Exchanger……… Limited Lifetime
Conditional Unit Replacement*
(Registration Required)………………………Limited Lifetime
*Parts……………………………………………Ten (10) Years
*See Product Warranty Card for details.
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
termination kits
ITEM #
889265
Model
description
RXGY-E03A
Concentric Horizontal/Vertical
Price
$254.00
combustible floor bases
ITEM #
889232
C887500
C887500
Model
description
RXGC-B17
RXGC-B21
RXGC-B24
FOR 17-1/2" Furnace Width
FOR 21" Furnace Width
FOR 24-1/2" Furnace Width
Price
$142.00
P.O.A.
P.O.A.
furnace filter frame matches
No door
ITEM #
599630
599631
599632
Size (")
description
16 × 25 × 1"
16 × 25 × 3"
20 × 25 × 3"
Frame – no door
Frame – no door
Frame – no door
Price
$45.39
62.99
64.38
With door
ITEM #
599629
599641
599633
599634
Size (")
description
16 × 25 × 1"
20 × 25 × 1"
16 × 25 × 3"
20 × 25 × 3"
Frame – with door
Frame – with door
Frame – with door
Frame – with door
Price
$49.37
49.37
71.55
72.76
With 1" or 4" door
ITEM #
599639
599635
599636
599637
599638
Size (")
description
16 × 24 × 6-3/4"
16 × 25 × 6-3/4"
20 × 25 × 6-3/4"
16 × 25 × 6-3/4"
20 × 25 × 6-3/4"
Frame
Frame – with 1" door
Price
$72.94
94.26
96.72
156.13
166.84
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
technical information
classic® 90 plus® high efficiency upflow gas furnaces
rgra–/rgrb– Series — upflow models
MODEL
RGRA-/
RGRB-
A
B
C
D
E
F
LEFT
SIDE
04EM
06EM
07EM
07EY
09EZ
10EZ
12ER
171/2 [445]
171/2 [445]
171/2 [445]
21 [533]
21 [533]
21 [533]
241/2 [622]
1611/32 [415]
1611/32 [415]
1611/32 [415]
1927/32 [504]
1927/32 [504]
1927/32 [504]
2311/32 [593]
155/8 [397]
155/8 [397]
155/8 [397]
191/8 [487]
191/8 [487]
191/8 [487]
225/8 [575]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
15 [422]
15 [422]
15 [422]
181/2 [511]
181/2 [511]
181/2 [511]
22 [600]
1325/32 [352]
1325/32 [352]
1325/32 [352]
179/32 [441]
179/32 [441]
179/32 [441]
2025/32 [530]
0
0
0
0
0
0
0
MINIMUM CLEARANCE (IN.) [mm]
RIGHT
BACK
TOP
FRONT VENT
SIDE
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
SHIP
WGTS.
[kg]
111 [50]
117 [53]
124 [56]
137 [62]
148 [67]
152 [69]
160 [73]
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
technical information (cont'd)
classic® 90 plus® high efficiency upflow gas furnaces (cont'd)
ACCESSORIES—UPFLOW
rgra–/rgrb– Series — upflow models — accessories
FOR HIGH ALTITUDES:
VENT TERMINATION KITS
CONCENTRIC: Horizontal/Vertical = RXGY-E03
HORIZONTAL TWO PIPE: RXGY-D02, RXGY-D03, RXGY-D04
NEUTRALIZER KIT: RXGY-A01
*For installations over 5000 ft.
FOSSIL FUEL KIT: RXPF-F01
RXPF-F02 (TVA)
RETURN AIR PLENUM: RXGR-C17B
RXGR-C21B
RXGR-C24B
EXTERNAL BOTTOM FILTER RACK: RXGF-CB
EXTERNAL SIDE FILTER RACK: RXGF-CA
MODEL
FILTER RACK FILTER SIZES* INCHES [mm]
RXGF-CB
RXGF-CA
(BOTTOM)
(SIDE)
RGRA-04
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
RGRA-06
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
191/4 x 25
[489 x 635]
191/4 x 25
[489 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
191/4 x 25
[489 x 635]
223/4 x 25
[578 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
RGRB-07EM
RGRB-07EY
RGRA-09
RGRA-10
RGRA-12
*HIGH ALTITUDE KIT: RXGY-F04 (105 KBTU/H)
RXGY-F05 (120 KBTU/H)
RXGY-F06 (45 KBTU/H/60 KBTU/H/
OPTION CODE FOR HIGH ALTITUDE: US & Canada – 278
NOTE: High altitude kits and options do NOT include additional
burner orifices. If a burner orifice change is necessary, they
must be ordered through PROSTOCK®. See Installation
Instructions for more information.
CAUTION: Always follow National Fuel Gas Code (NFGC) guidelines
when converting furnaces for high altitudes.
For all installations above 2000 ft. (including all option – 278
models), the burner orifice size needs to be recalculated and
verified. A burner orifice change may still be required. See
Installation Instructions for more information.
NOTE: For Canadian installations only, an optional derate (manifold
gas pressure reduction) method may be used to adjust the
furnace for altitude. See Installation Instructions for more
information. This optional method may NOT be used for
U.S. installations.
(U.S. Models—Kit packaged with furnace.
Requires field installation).
[
] Designates Metric Conversions
*Filter racks are shipped without filters.
Filters shipped with furnace may be used or a suitable 1" [25.4 mm] filter.
PLENUM DATA FOR “A” COILS
Plenum adapters are required in some instances for use on upflow
applications when plenum and furnace size do not match.
FURNACE
WIDTH
IN. [mm]
14 [356]
PLENUM
WIDTH
IN. [mm]
161/4 [413]
14
[356]
201/4 [514]
171/2 [445]
171/2 [445]
171/2 [445]
PLENUM ADAPTER
UPFLOW
COIL
PLENUM
RXAA-C171
RXAL-B16BU
RXAA-C172
RXAL-B20BU
161/4 [413]
201/4 [514]
215/8 [549]
RXAA-C185
RXAA-C173
RXAA-C187
RXAL-B16BU
RXAL-B20BU
RXAL-B21BU
171/2 [445]
251/4 [641]
RXAA-C174
RXAL-B25BU
21 [533]
21 [533]
21 [533]
241/2 [622]
241/2 [622]
251/4 [641]
221/4 [565]
215/8 [549]
251/4 [641]
215/8 [549]
RXAA-C175
RXAA-C176
RXAA-C188
RXAA-C177
RXAA-C187
RXAL-B25BU
RXAL-B22BU
RXAL-B21BU
RXAL-B25BU
RXAL-B21BU
Note: See Form Number C11-206 for MultiFlex® coil data.
6
Rheem Manufacturing Company
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
technical
information
DOWNFLOW
MODELS (cont'd)
classic® 90 plus® high efficiency downflow/horizontal gas furnaces
rgta– Series —downflow models
MODEL
RGTA-
A
B
C
D
E
F
LEFT
SIDE
04
06
07EM
07EY
09
10
12
171/2 [445]
171/2 [445]
171/2 [445]
21 [533]
21 [533]
21 [533]
241/2 [622]
1611/32 [415]
1611/32 [415]
1611/32 [415]
1927/32 [504]
1927/32 [504]
1927/32 [504]
2311/32 [593]
155/8 [397]
155/8 [397]
155/8 [397]
193/16 [486]
193/16 [486]
193/16 [486]
225/8 [575]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
165/8 [422]
165/8 [422]
165/8 [422]
201/8 [511]
201/8 [511]
201/8 [511]
235/8 [600]
137/8 [352]
137/8 [352]
137/8 [352]
173/8 [441]
173/8 [441]
173/8 [441]
207/8 [530]
0
0
0
0
0
0
0
RIGHT
BACK
TOP
FRONT VENT
SIDE
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
SHIP
WGTS.
[kg]
111 [50]
117 [53]
123 [56]
123 [56]
148 [67]
152 [69]
160 [73]
IMPORTANT NOTE: Horizontal furnace may be installed for horizontal left hand air supply ONLY. The condensate trap provided for horizontal application must be
installed in the field beneath the unit as directed in the furnace Installation & Operating Instructions.
4
– E.&O.E.
– All Prices F.O.B.
Our Warehouse – Subject to Change Without Notice – All Taxes Extra – May not be Available at All Branches –
Rheem
Manufacturing
Company
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
downflow/horizontal
HORIZONTAL
MODELS gas furnaces (cont'd)
rgta–Series —horizontal models
[
Rheem Manufacturing Company
5
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
downflow/horizontal gas furnaces (cont'd)
blower performance
data — DATA—RGTA
rgta models MODELS
BLOWER
PERFORMANCE
BLOWER PERFORMANCE DATA—RGTA MODELS
MODEL
MODEL
RGTARGTA-
BLOWER
BLOWER
SIZE
SIZE
IN.[mm]
[mm]
IN.
MOTOR
MOTOR
H.P.
H.P.
[W]
[W]
BLOWER
BLOWER
SPEED
SPEED
LOW
LOW
MED-LO
MED-LO
MED-HI
MED-HI
HIGH
HIGH
[.02]
0.10.1
[.02]
820
[387]
820 [387]
[439]
930930[439]
1150[543]
[543]
1150
1414[667]
[667]
1414
LOW
LOW
MED-L0
MED-L0
MED-HI
MED-HI
HIGH
HIGH
LOW
LOW
MED-L0
MED-L0
MED-HI
MED-HI
HIGH
HIGH
LOW
LOW
MED-L0
MED-L0
MED-HI
MED-HI
HIGH
HIGH
[375]
795795[375]
[429]
910910[429]
1115[526]
[526]
1115
1365
1365[644]
[644]
780780[368]
[368]
890890[420]
[420]
1100
[519]
1100 [519]
1340
[632]
1340 [632]
1185
1185[559]
[559]
1405
1405[663]
[663]
1595
1595[753]
[753]
1835
1835[866]
[866]
04
04
11xx77
11
[279xx178]
178]
[279
1/2
1/2
[373]
[373]
06
11xx77
11
[279xx178]
178]
[279
1/2
1/2
[373]
[373]
07EM
11
11xx77
[279
[279xx178]
178]
1/2
1/2
[373]
[373]
07EY
07EY
12
12xx77
[305
[305xx178]
178]
3/4
3/4
[559]
[559]
LOW
LOW
MED-L0
MED-L0
MED-HI
MED-HI
HIGH
HIGH
LOW
LOW
12 x 11
3/4
MED-L0
10
MED-L0
12xx279]
11
3/4
[305
[559]
MED-HI
10
MED-HI
[305 x 279]
[559]
HIGH
HIGH
LOW
LOW
11 x 10
3/4
MED-L0
12
MED-L0
11xx254]
10
3/4
[279
[559]
MED-HI
12
MED-HI
[279 x 254]
[559]
HIGH
HIGH
NOTE: Recommended blower speeds are in bold.
NOTE: Recommended blower speeds are in bold.
09
09
12 x 11
12 x 11
[305 x 279]
[305 x 279]
3/4
3/4
[559]
[559]
1155 [545]
1155 [545]
1420 [670]
1420 [670]
1605 [757]
1605[946]
[757]
2005
2005 [946]
1180 [557]
1180[689]
[557]
1460
1460[793]
[689]
1680
1680[970]
[793]
2055
2055 [970]
1285 [606]
1285[750]
[606]
1590
1590[868]
[750]
1840
1840
[868]
2315
[1093]
2315 [1093]
CFM [L/s] AIR DELIVERY
CFM [L/s] AIR DELIVERY
EXTERNAL
STATIC
PRESSURE
INCHES
WATER
COLUMN
EXTERNAL
STATIC
PRESSURE
INCHES
WATER
COLUMN
[kPa] [kPa]
0.2
[.05]
0.3
[.07]
0.4
[.10]
0.5
[.12]
0.6 [.15]0.7 [.17]
0.7 [.17]
0.2 [.05]
0.3 [.07]
0.4 [.10]
0.5 [.12]
0.6 [.15]
790
[373]
760
[359]
725
[342]
690
[326]
650
[306]
610 [288]
790 [373]
760 [359]
725 [342]
690 [326]
650 [306]
610 [288]
[420] 850 850
815 [384] 785 [370]
785 [370]750 [354]
750 [354]
720 [340]
890890
[420]
[401][401] 815 [384]
720 [340]
1120
[528] 10901090
950 [448]
900 [425]
1120
[528]
[514][514]10451045
[493][493]1002 1002
[473] [473]950 [448]
900 [425]
1365
[644] 13201320
1165 [550]
1115 [526]
1365
[644]
[622][622]12701270
[599][599]1220 1220
[576] [576]
1165 [550]
1115 [526]
[359] 730 730
695 [328] 660 [311]
660 [311]615 [290]
615 [290]
570 [269]
760760
[359]
[344][344] 695 [328]
570 [269]
[418] 860 860
815 [384] 770 [363]
770 [363]725 [342]
725 [342]
680 [321]
885885
[418]
[406][406] 815 [384]
680 [321]
1080
[510] 10451045
965 [455]920 [434]
920 [434]
875 [413]
1080
[510]
[493][493]10051005
[474][474] 965 [455]
875 [413]
1315
[620]
[600][600]12251225
[578][578]1180 1180
[557] [557]
1125 [531]
1070 [505]
1315
[620] 12701270
1125 [531]
1070 [505]
750750
[354]
[339][339] 675 [318]
555 [262]
[354] 720 720
675 [318] 635 [300]
635 [300]595 [281]
595 [281]
555 [262]
860860
[406]
[394][394] 790 [373]
660 [311]
[406] 835 835
790 [373] 750 [354]
750 [354]705 [332]
705 [332]
660 [311]
1060
[500]
1025
[484]
980
[462]
940
[443]
890
[420]
845
[399]
1060 [500]
1025 [484]
980 [462]
940 [443]
890 [420]
845 [399]
1295
[611]
1250
[590]
1200
[566]
1150
[543]
1090
[514]
1025
[484]
1295 [611]
1250 [590]
1200 [566]
1150 [543]
1090 [514]
1025 [484]
1160
[547]
[538][538]11151115
[626][626]1095 1095
[517] [517]
1065 [503]
1040 [491]
1160
[547] 11401140
1065 [503]
1040 [491]
1375
[649]
[637][637]13101310
[618][618]1270 1270
[599] [599]
1235 [583]
1195 [564]
1375
[649] 13501350
1235 [583]
1195 [564]
1560
[738]
[720][720]14801480
[698][698]1440 1440
[679] [679]
1380 [651]
1325 [625]
1560
[738] 15251525
1380 [651]
1325 [625]
1780
[840]
[816][816]16751675
[791][791]1625 1625
[767] [767]
1555 [734]
1480 [698]
1780
[840] 17301730
1555 [734]
1480 [698]
940 [443]
1125 [531]
1100 [519]
1080 [510]
1060 [500]
1000 [472]
1125 [531]
1100 [519]
1080 [510]
1060 [500]
1000 [472]
940 [443]
1175 [554]
1400 [661]
1380 [651]
1365 [644]
1350 [637]
1260 [594]
1400 [661] 15501380
[651]15601365
[644]1570 1350
[637]
1260 [594]
1175 [554]
1390 [656]
1575 [743]
[732]
[736]
[740]
1480 [698]
1575
[743] 19301550
1480 [698]
1390 [656]
1680 [793]
1965
[927]
[910][732]18901560
[892][736]1850 1570
[873] [740]
1765 [833]
1965 [927]
1930 [910]
1890 [892]
1850 [873]
1765 [833]
1680 [793]
1150 [543]
1120 [528]
1100 [519]
1080 [510]
1025 [484]
970 [458]
1150
[543]
1120
[528]
1100
[519]
1080
[510]
1025
[484]
970 [458]
1425 [672]
1390 [656]
1375 [649]
1360 [642]
1280 [604]
1200 [566]
1425
[672] 16151390
1280 [604]
1200 [566]
1645
[776]
[762][656]15851375
[748][649]1560 1360
[736] [642]
1490 [703]
1420 [670]
1645
[776] 19401615
1490 [703]
1420 [670]
2000
[944]
[915][762]18801585
[887][748]1820 1560
[859] [736]
1745 [823]
1675 [790]
2000 [944]
1940 [915]
1880 [887]
1820 [859]
1745 [823]
1675 [790]
1250 [590]
1215 [573]
1235 [582]
1260 [595]
1230 [580]
1200 [566]
1250
[590] 15401215
1230 [580]
1200 [566]
1565
[738]
[727][573]15051235
[710][582]1475 1260
[696] [595]
1425 [672]
1375 [649]
1565
[738] 18001540
1425 [672]
1375 [649]
1820
[860]
[850][727]17501505
[826][710]1700 1475
[802] [696]
1645 [776]
1590 [750]
1820
[860] 21851800
1645 [776]
1590 [750]
2250
[1062]
[1031][850]21101750
[996][826]2040 1700
[963] [802]
1965 [927]
1890 [892]
2250 [1062]
2185 [1031]
2110 [996]
2040 [963]
1965 [927]
1890 [892]
Downflow models — accessories
ACCESSORIES—DOWNFLOW
CONCENTRIC: Vertical/Horizontal = RXGY-E03
Horizontal = =RXGY-C01
CONCENTRIC: Vertical/Horizontal
RXGY-E03
Horizontal
= RXGY-C01
HORIZONTAL TWO PIPE:
RXGY-D02,
RXGY-D03,
RXGY-D04,
HORIZONTAL TWO PIPE: RXGY-D02,RXGY-G02
RXGY-D03,
CONDENSATE PUMP KIT: RXGY-B01
RXGY-D04, RXGY-G02
COMBUSTIBLE
FLOORKIT:
BASE:
RXGC-B17
NEUTRALIZER
RXGY-A01
RXGC-B21
COMBUSTIBLE FLOOR BASE:RXGC-B24
RXGC-B17
RXGC-B21
EXTERNAL FILTER RACK: RXGF-CC
RXGC-B24
EXTERNAL FILTER
RACK: RXGF-CC
MODEL RGTARXGF-CC
04
(2) 12 x 20 [305 x 508]
MODEL RGTARXGF-CC
06
(2) 12 x 20 [305 x 508]
04
(2)
12
x
20 [305 x 508]
07
(2) 12 x 20 [305 x 508]
06
x 20
[305
x 508]
09
(2)(2)
1212
x 20
[305
x 508]
07
x 20
[305
x 508]
10
(2)(2)
1212
x 20
[305
x 508]
09
(2)
12
x
20
[305
x 508]
12
(2) 14 x 20 [305 x 508]
10
(2) 12 x 20 [305 x 508]
*Filter racks are shipped
without filters.
Filters shipped with
[25.4
mm]
filter.
12 furnace may be used or a suitable
(2) 141"x 20
[305
x 508]
Plenum
adapters are DATA
required inFOR
some instances
for use on downflow applications
PLENUM
“A” COILS
when plenum and furnace size do not match.
Plenum adapters are required in some instances for use on downflow applications
when
plenum andPLENUM
furnace size do not match.
FURNACE
PLENUM ADAPTER
COIL
WIDTH
WIDTH
DOWNFLOW
PLENUM
FURNACE
PLENUM
IN. [mm]
IN. [mm]
PLENUM ADAPTER
COIL
WIDTH
WIDTH
1
DOWNFLOW RXAL-B16BU
PLENUM
171/2IN.
[445]
RXAA-C186
[mm] 16 /4 [413]
IN. [mm]
1 [514]
171/17
2 [445]
RXAA-C173
1/2 [445] 20 /416
1/4 [413]
RXAA-C186 RXAL-B20BU
RXAL-B16BU
171/2 [445]
215/8 [549]
RXAA-C187
RXAL-B21BU
1
1
17 /2 [445]
20 /4 [514]
RXAA-C173
RXAL-B20BU
171/2 [445]
251/4 [641]
RXAA-C174
RXAL-B25BU
171/2 [445]
215/8 [549]
RXAA-C187
RXAL-B21BU
RXAA-C175
RXAL-B25BU
211/2 [533]
251/4 [641]
251/4 [641]
RXAA-C174
RXAL-B25BU
171/2 [445]
211/2 [533]
221/4 [565]
RXAA-C176
RXAL-B22BU
251/4 [641]
RXAA-C175
RXAL-B25BU
211/2 [533]
RXAA-C188
RXAL-B21BU
211/2 [533]
215/8 [549]
211/2 [533]
221/4 [565]
RXAA-C176
RXAL-B22BU
1
1
24 /2 [622]
25 /4 [641]
RXAA-C177
RXAL-B25BU
215/8 [549]
RXAA-C188
RXAL-B21BU
211/2 [533]
241/2 [622]
215/8 [549]
RXAA-C187
RXAL-B21BU
241/2 [622]
251/4 [641]
RXAA-C177
RXAL-B25BU
®
NOTE: See Form Number C11-206 for MultiFlex coil data.
241/2 [622]
215/8 [549]
RXAA-C187
RXAL-B21BU
FOSSIL
FUEL
RXPF-F02
(TVA) ® coil data.
NOTE:
See KIT:
FormRXPF-F01
Number C11-206
for MultiFlex
FOSSIL FUEL KIT: RXPF-F01
RXPF-F02 (TVA)
racks are shipped
filters.
[*Filter
] Designates
Metricwithout
Conversions
shipped with
furnace
may be used or a suitable 1" [25.4 mm] filter.
[ Filters
] Designates
Metric
Conversions
[
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
rheem classic® series 90 plus with dual comfort control
two-stage
upflow gas furnaces
UPFLOW
MODELS
rgrl–Series — upflow models
MODEL
RGRL-
A
B
C
D
E
F
LEFT
SIDE
04*M
06*M
07*M
07*Y
09*Z
10*Z
171/2 [445]
171/2 [445]
171/2 [445]
21 [533]
21 [533]
21 [533]
1611/32 [415]
1611/32 [415]
1611/32 [415]
1927/32 [504]
1927/32 [504]
1927/32 [504]
155/8 [397]
155/8 [397]
155/8 [397]
191/8 [487]
191/8 [487]
191/8 [487]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
15 [422]
15 [422]
15 [422]
181/2 [511]
181/2 [511]
181/2 [511]
1325/32 [352]
1325/32 [352]
1325/32 [352]
179/32 [441]
179/32 [441]
179/32 [441]
0
0
0
0
0
0
RIGHT
BACK
TOP
FRONT VENT
SIDE
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
SHIP
WGTS.
[kg]
111 [50]
117 [53]
123 [ ]
145 [66]
148 [67]
152 [69]
*E=Standard
*N=NOx Models
4
Rheem Heating, Cooling and Water Heating
[
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
rheem classic® series 90 plus with dual comfort control
two-stage upflow gas furnaces (cont'd)
rgrl–Series — accessories — upflow
VENT TERMINATION KITS CONCENTRIC: HORIZONTAL/
VERTICAL =
RXGY-E03A (US & Canadian Installations)
(US Installations)
RXGY-D02A, RXGY-D03A, RXGY-D04A (Canadian Installations)
RXGY-G02 (US Only)
FOSSIL FUEL KIT: RXPF-F01, RXPF-F02 (TVA)
RETURN AIR PLENUM: RXGR-C17B, RXGR-C21B, RXGR-C24B
LP CONVERSION KITS:
U.S./Canadian RXGJ-FP19 or RXGJ-FP21
MODEL
RGRL-
RXGF-CB
RXGF-CA
(BOTTOM)
(SIDE)
04
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
06
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
07EM
07NM
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
07EY
07NY
191/4 x 25
[489 x 635]
153/4 x 25
[400 x 635]
191/4 x 25
[489 x 635]
191/4 x 25
[489 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
09
10
FOR HIGH ALTITUDES:
HIGH ALTITUDE KIT:
INPUT BTU/HR [kW]
45,000 [13]
HIGH ALTITUDE KIT NO.
RXGY-F18
60,000 [18]
RXGY-F18
75,000 [22]
Not Required
90,000 [26]
105,000 [31]
RXGY-F20
Not Required
NOTE: High altitude kits and options do NOT include additional
burner orifices. If a burner orifice change is necessary, they
must be ordered through PROSTOCK®. See Installation
Instructions for more information.
Option – 278 furnaces are shipped with #51 DMS orifices installed.
This is one drill size smaller than standard furnaces to account for
expected average elevations and heating values typically seen in
these areas.
when converting for high altitudes.
U.S. installations.
[
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
two-stage
upflow gas furnaces
UPFLOW MODELS
rgrM– series — upflow models
MODEL
RGRM-
A
B
C
D
E
F
LEFT
SIDE
04*M
06*M
07*M
07*Y
09*Z
10*Z
12*R
17.5 [445]
17.5 [445]
17.5 [445]
21 [533]
21 [533]
21 [533]
24.5 [622]
1611/32 [415]
1611/32 [415]
1611/32 [415]
1927/32 [504]
1927/32 [504]
1927/32 [504]
2311/32 [593]
155/8 [397]
155/8 [397]
155/8 [397]
191/8 [487]
191/8 [487]
191/8 [487]
225/8 [575]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
151/2 [422]
151/2 [422]
151/2 [422]
181/2 [511]
181/2 [511]
181/2 [511]
221/2 [600]
1325/32 [352]
1325/32 [352]
1325/32 [352]
179/322 [441]
179/322 [441]
179/322 [441]
2025/32 [530]
0
0
0
0
0
0
0
RIGHT
BACK
TOP
FRONT
VENT
SIDE
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1 [25]
2 [51]
0
*E=Standard
* N=NOx
[
5
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
two-stage upflow gas furnaces (cont'd)
rgrM– series — accessories — upflow
VERTICAL =
(US Installations)
RXGY-G02 (US Only)
FURNACE
WIDTH
IN. [mm]
141/2 [356]
PLENUM
WIDTH
IN. [mm]
161/4 [413]
141/2 [356]
201/4 [514]
171/2 [445]
171/2 [445]
171/2 [445]
PLENUM ADAPTER
UPFLOW
COIL
PLENUM
RXAA-C171
RXAL-B16BU
RXAA-C172
RXAL-B20BU
161/4 [413]
201/4 [514]
215/8 [549]
RXAA-C185
RXAA-C173
RXAA-C187
RXAL-B16BU
RXAL-B20BU
RXAL-B21BU
171/2 [445]
251/4 [641]
RXAA-C174
RXAL-B25BU
21
21
21
251/4 [641]
221/4 [565]
215/8 [549]
RXAA-C175
RXAA-C176
RXAA-C188
RXAL-B25BU
RXAL-B22BU
RXAL-B21BU
[533]
[533]
[533]
®
RXAA-C177
241See
/2 [622]
251/C11-206
4 [641] for MultiFlex
Note:
Form Number
coil data.
241/2 [622]
215/8 [549]
RXAA-C187
FOR HIGH ALTITUDES:
HIGH ALTITUDE KIT:
INPUT BTU/HR [kW]
RGRM-04*M
HIGH ALTITUDE KIT NO.
RXGY-F18
RGRM-06*M
RXGY-F18
RGRM-07*M
RGRM-07*Y
Not Required
Not Required
RGRM-09*Z
RXGY-F20
RGRM-10*Z
RGRM-12*R
Not Required
RXGY-F21
Option – 278 furnaces are shipped with #51 DMS orifices installed.
This is one drill size smaller than standard furnaces to account for
expected average elevations and heating values typically seen in
these areas.
when converting for high altitudes.
U.S. installations.
RXAL-B25BU
RXAL-B21BU
LP CONVERSION KITS:
MODEL
RGRM-
RXGF-CB
RXGF-CA
(BOTTOM)
(SIDE)
04
06
07EM
07NM
07EY
07NY
09
10
12
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
191/4 x 25
[489 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
191/4 x 25
[489 x 635]
153/4 x 25
[400 x 635]
191/4 x 25
[489 x 635]
223/4 x 25
[578 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
[
7
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
DOWNFLOW
MODELS
two-stage
gas furnaces
DOWNFLOWdownflow/horizontal
MODELS
rgtM– series — downflow models
MODEL
MODEL
RGTMRGTM06
06 07
07 09
09 10
10
A
A
171/2 [445]
1/2 [445]
1721
[533]
2121 [533]
[533]
21241[533]
/2 [621]
1
24 /2 [621]
B
B
1611/32 [415]
11/32 [415]
1619
27/32 [504]
27/32 [504]
1919
27/32 [504]
27/32 [504]
1923
11/32 [593]
2311/32 [593]
C
C
D
D
E
E
F
F
155/8 [397]
5/8 [397]
1519
3/16 [486]
3/16 [486]
1919
3/16 [486]
3/16 [486]
1922
5/8 [575]
225/8 [575]
2 [51]
22[51]
[51]
22[51]
[51]
22[51]
[51]
2 [51]
165/8 [422]
5/8 [422]
16
201/8 [511]
1
20
201//88 [511]
[511]
1
20
235//88 [511]
[600]
5
23 /8 [600]
137/8 [352]
7/8 [352]
13
173/8 [441]
3
17
173//88 [441]
[441]
3
17
207//88 [441]
[530]
7
20 /8 [530]
LEFT
LEFT
SIDE
SIDE
0
0
0
00
00
0
RIGHT
BACK
TOP
FRONT VENT
RIGHT
SIDE
BACK
TOP
FRONT VENT
SIDE
0
0
1 [25]
2 [51]
0
0
0
1
[25]
2 [51]
0
0
0
1 [25]
2 [51]
0
0
0
1
[25]
2
[51]
0
0
1 [25]
2 [51]
00
[25] 2 2[51]
[51]
00
00
11[25]
00
0
0
1 [25]
2 [51]
0
[
[
SHIP
SHIP
WGTS.
WGTS.
[kg]
[kg]
123 [56]
123 [56]
123 [56]
123
[56]
148
[67]
148
[67]
165
[75]
165 [75]
installed in
the field
beneath
the unit
directed inleft
thehand
furnace
Installation
& The
Operating
Instructions.
IMPORTANT NOTE: Horizontal
furnace
may
be installed
forashorizontal
air supply
ONLY.
condensate
trap provided for horizontal application must be
5
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice
– AllHeating,
Taxes Extra
– Mayand
not Water
be Available
at All Branches
–
Rheem
Cooling
Heating
5
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
rheem classic®
series 95% a.f.u.e. with dual comfort control™
HORIZONTAL
MODELS
two-stage downflow/horizontal gas furnaces (cont'd)
HORIZONTAL
MODELS
rgtM– series — horizontal models
in the
field beneath
unit asfor
directed
in theleft
furnace
Installation
& Operating
Instructions.
IMPORTANT NOTE:installed
Horizontal
furnace
may be the
installed
horizontal
hand air
supply ONLY.
The condensate
trap provided for horizontal application must be
6
6
– E.&O.E.
– All
Prices F.O.B.
Our Warehouse
All Taxes Extra – May not be Available at All Branches –
Rheem
Heating,
Cooling
and Water
Heating – Subject to Change Without Notice –
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
two-stage
downflow/horizontal gas furnaces (cont'd)
rgtM– series — accessories — downflow
VERTICAL =
(US Installations)
RXGY-G02 (US Only)
FOR HIGH ALTITUDES:
HIGH ALTITUDE KIT: NOT REQUIRED
U.S. installations.
[
Plenum adapters are required in some instances for use on downflow applications when plenum and furnace size do not match.
FURNACE
WIDTH
IN. [mm]
141/2 [356]
PLENUM
WIDTH
IN. [mm]
161/4 [413]
141/2 [356]
201/4 [514]
171/2 [445]
171/2 [445]
171/2 [445]
PLENUM ADAPTER
UPFLOW
COIL
PLENUM
RXAA-C171
RXAL-B16BU
RXAA-C172
RXAL-B20BU
161/4 [413]
201/4 [514]
215/8 [549]
RXAA-C185
RXAA-C173
RXAA-C187
RXAL-B16BU
RXAL-B20BU
RXAL-B21BU
171/2 [445]
251/4 [641]
RXAA-C174
RXAL-B25BU
21
21
21
251/4 [641]
221/4 [565]
215/8 [549]
RXAA-C175
RXAA-C176
RXAA-C188
RXAL-B25BU
RXAL-B22BU
RXAL-B21BU
[533]
[533]
[533]
®
1/2 [622]
RXAA-C177
24See
251/C11-206
4 [641] for MultiFlex
Note:
Form Number
coil data.
241/2 [622]
215/8 [549]
RXAA-C187
RXAL-B25BU
RXAL-B21BU
LP CONVERSION KITS:
MODEL
RGTM-
RXGF-CB
RXGF-CA
(BOTTOM)
(SIDE)
06
07ER
07NR
09
10
153/4 x 25
[400 x 635]
191/4 x 25
[489 x 635]
191/4 x 25
[489 x 635]
223/4 x 25
[578 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
Rheem Heating,
Before proceeding with installation, refer
to installation instructions packaged
Cooling and
with each model, as well as complying
Water Heating
with all Federal, State, Provincial, and
– E.&O.E.
– All Prices and
F.O.B.practices.
Our Warehouse – Subject to
Change
Without
Notice
– All Taxes Extra – May not be Available at All Branches –
Local codes,
regulations,
P.O.
Box 17010,
Fort Smith,
AR 72917
“In keeping
with its policy of continuous progress and product improvement, Rheem reserves the right to make changes withoutECCO
notice.”supply
PRINTED IN U.S.A.
1-10 DC
FORM NO. G11-505
Supersedes Form No. G11-505
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
rheem PRESTIGE® series 90 PLUS® COMMUNICATING MODULATING UPFLOW GAS
FURNACES EQUIPPED WITH THE comfort control2 SYSTEM AND
CONTOUR COMFORT CONTROL®
UPFLOW MODELS
rgfe– series — upflow models
[
MODEL
RGFE-
A
B
C
D
E
F
LEFT
SIDE
06
07
09
10
12
171/2 [445]
171/2 [445]
21 [533]
21 [533]
241/2 [622]
163/8 [416]
163/8 [416]
197/8 [505]
197/8 [505]
233/8 [594]
155/8 [397]
155/8 [397]
191/8 [487]
191/8 [487]
225/8 [575]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
15 [422]
15 [422]
181/2 [511]
181/2 [511]
22 [600]
1313/16 [351]
1313/16 [351]
175/16 [440]
175/16 [440]
2013/16 [529]
0
0
0
0
0
RIGHT
SIDE
0
0
0
0
0
BACK
TOP
FRONT
VENT
0
0
0
0
0
1 [25]
1 [25]
1 [25]
1 [25]
1 [25]
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
0
0
0
0
0
5
ECCO supply
Revised: June 2010
RHEEM GAS FURNACES
www.rheemac.com
rheem PRESTIGE® series 90 PLUS® COMMUNICATING MODULATING UPFLOW GAS
FURNACES EQUIPPED WITH THE comfort control2 SYSTEM AND
CONTOUR
COMFORT CONTROL® (cont'd)
rgfe– series — accessories — upflow
VERTICAL =
THERMOSTATS
RECOMMENDED MODULATING FURNACE THERMOSTAT
(US Installations)
RXGY-G02 (US Only)
RETURN AIR PLENUM: RXGR-C17B
RXGR-C21B
RXGR-B24B
RHC-TST550CMMS
MODEL
RGFE06
07
09
10
12
RXGF-CB
RXGF-CA
(BOTTOM)
(SIDE)
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
191/4 x 25
[489 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
191/4 x 25
[489 x 635]
223/4 x 25
[578 x 635]
153/4 x 25
[400 x 635]
153/4 x 25
[400 x 635]
FURNACE
WIDTH
IN. [mm]
171/2 [445]
171/2 [445]
171/2 [445]
PLENUM
WIDTH
IN. [mm]
161/4 [413]
201/4 [514]
215/8 [549]
171/2 [445]
21
21
21
PLENUM ADAPTER
UPFLOW
COIL
PLENUM
RXAA-C185
RXAA-C173
RXAA-C187
RXAL-B16BU
RXAL-B20BU
RXAL-B21BU
251/4 [641]
RXAA-C174
RXAL-B25BU
[533]
[533]
[533]
251/4 [641]
221/4 [565]
215/8 [549]
RXAA-C175
RXAA-C176
RXAA-C188
RXAL-B25BU
RXAL-B22BU
RXAL-B21BU
241/2 [622]
241/2 [622]
251/4 [641]
215/8 [549]
RXAA-C177
RXAA-C187
RXAL-B25BU
RXAL-B21BU
CONTRACTOR BENEFITS:
• Multi-Purpose Thermostat-Setup, Control & Diagnostics
• Auto-Configuration – No Manual Settings Required in the Field
• System History – More Accurate Diagnostics
• Easy Installation – Requires only 4 wires
• Diagnostic Messages (Service Access to Fault Codes)
• Blower Adjustment in Heat and Cool
• Programmable Fan
• USB Interface for contractor contact information and thermostat
programming
HOMEOWNER BENEFITS:
• Scrolling System Status
• De-Humidification Control
• Humidification Control
• Heat/Cool/Auto Change-over
• Outdoor Temperature Display
• Backlight On/Off
• Intelligent Scheduling Ramp-Up/Program Anticipation
• Audio Notifications On/Off
• Air Filter, UV Lights & Humidifier Maintenance Reminder
• Temperature Offset
• Continuous Fan (Hi, Med, Lo)
FOSSIL FUEL KIT
RXPF-F02
*PROGRAMMABLE THERMOSTAT ACCESSORIES:
Adapter Plate = F61-2600
Remote F1451328 and F1451378 Sensor
*Available through PROSTOCK®.
[
LP KIT: (Available through PROSTOCK®)
U.S./Canadian = RXGJ-FP07 (HG & HB Fuel codes only).
U.S./Canadian = RXGJ-FP27 (HA & HH Fuel codes only).
ECCO supply

Rheem Gas Furnaces

Transcription

Similar documents

Amteco Brochure Website PDF

Relaxation Starts Here.

Quality and Performance Built Right In

A furnace that fits your lifestyle - Grain Burning Stoves by Prairie Fire

OBH Heatmor exchange program

The Rising Main Issue 30

MF Series Brochure

ISO 9001:2008 Certified - AFC

Comfort, Quality and Efficiency. - Comfort-Aire

Thermal processing equipment technology - AFC