Wifi LED Controller – User Guide www.oznium.com

Wifi LED Controller – User Guide Change the color 1. Color Wheel By touching the color wheel, the color of the connected LED can be adjusted. 2. Editor interface Drag the RGB color slider or click the adjustment key above the slider to change the RGB values. Or you may click “Edit” button to input the RGB values directly. www.oznium.com
Page 1 of 5 Wifi LED Controller – User Guide Change the brightness 1. Color Wheel The brightness can be changed by the slider as shown below. 2. Editor interface Drag the brightness slider to change the overall brightness. www.oznium.com
Page 2 of 5 Wifi LED Controller – User Guide Pre-­‐set mode for the style In the Style interface, M1-­‐M40 represent 40 different changing modes. Each changing mode has 8 speed levels and 8 brightness levels. S1 is the lowest speed and S8 is the fastest. B1 is the lowest brightness while B8 is the highest. M1-­‐M32 are the pre-­‐set modes. www.oznium.com
Page 3 of 5 Wifi LED Controller – User Guide Create your own scene -­‐ Save scene: Click the “save” button on the interface of Color Wheel, Editor or Style, select any scene 1-­‐9 and click “OK”. The saved Scene can be modified by the pop-­‐up box. -­‐ Play scene: Click the “Scene 1-­‐9” on the Scene interface, the corresponding scene changing mode will be pop-­‐up. The setting parameters will be shown at the top of the screen. www.oznium.com
Page 4 of 5 Wifi LED Controller – User Guide DIY a new style Select D1-­‐D8 on the Style interface, and click the “DIY” button. Select color by touching the color wheel and then click any of the 10 boxes at the bottom to fill the current color; Click “Delete” to delete the selected color box’s color. Click “Play” to play the DIY mode designed immediately. You can only set max 10 DIY colors. When it’s set less than 10 colors, the rest will be black color in default. www.oznium.com
Page 5 of 5