taboo - W.SCHILLIG

ta boo 22070
[taboo]
...meets the spirit of times.
Daringly and yet charming, it creatively caters
for the needs of modern equippers. With a matching individual chaise, the [taboo]-combination
turns into your personal lawn in a flash.
Cover: Z74/95 graphite
spring core
leg heights
2 seat depths
side part
footstool
contrasting thread
22 0 7 0 ta b oo
Cha i s e s
Sof as
KM
NF
NL
PF
PL
chaise w/ ratchet back
sofa with side part
adjustment
sofa extra deep with side
part adjustment
sofa with side part
adjustment
sofa extra deep with side
part adjustment
87/205/76/41
202/91/76/41
202/101/76/41
232/91/76/41
232/101/76/41
item no. for castors = KMR
(upcharge)
Ele m e n t s w i t h s i d e p ar t r ig h t
NF06
PF06
PL06
sofa with side part with side sofa with side part extra
part adjustment
deep with side part
adjustment
NL06
large sofa with side part
with side part adjustment
large sofa with side part
extra deep with side part
adjustment
161/91/76/41
191/91/76/41
191/101/76/41
161/101/76/41
Ele m e n t s w i t h s i d e p ar t l eft
NF07
PF07
PL07
sofa with side part with side sofa with side part extra
part adjustment
deep with side part
adjustment
NL07
large sofa with side part
with side part adjustment
large sofa with side part
extra deep with side part
adjustment
161/91/76/41
191/91/76/41
191/101/76/41
161/101/76/41
End e l e me n t s ri g h t
KF06
KF06N
EG06
FP067
one arm chaise with side
part adjustment
one arm chaise with side
part twice with side part
adjustment
corner sofa with ottoman
corner sofa with side part
with side part adjustment
119/156/76/41
107/183/76/41
91/219/76/41
91/245/76/41
End e l e me n t s l e ft
KF07
KF07N
EG07
FP076
one arm chaise with side
part adjustment
one arm chaise large side
part with side part
adjustment
corner sofa with ottoman
corner sofa with side part
with side part adjustment
119/156/76/41
107/156/76/41
91/219/76/41
91/245/76/41
G003
G004
GF004
GF065
GF075
large ottoman
extra large ottoman
extra large ottoman
extendible
ottoman
ottoman
115/60/41/41
145/60/41/41
130/64/41/41
191/66/41/41
191/66/41/41
item no. for castors =
GF065R (upcharge)
item no. for castors =
GF075R (upcharge)
Ot to m e n
Ac c e s s o ri e s
UG004
U
U69
tray for ottoman GF004
side part cushion
large pillow
41/59/7/0
60/60/0
70/70/8/0
All specified dimensions are approximate in width/depth/height/seat height. We would like to point out that deviations of +/- 2 cm may occur depending on the
filling material used and its upholstering. Please contact us if you would like more detailed information. We reserve the right to make technical changes.
2
Special features
Flexible side parts
The side parts are foldable
and fitted with notch
function as standard.
Cover: W60/99 black
t ab o o - examp l es f or l ivin g room s
Extendible ottoman
The GF 004 ottoman can be
extended in its width and
contains a storage capacity.
With the intermediate table
it becomes a table. The
wooden board is available in
different stain shades and
gloss paints.
Leg and seat heights
The model is available in different seat and back
heights according to the different leg heights. The leg
design has to be indicated.
Cover: Z60/42 white
O rd e r i n f or mation
Flexible side parts:
A maximum load-bearing capacity up to 25 kg is
guaranteed for the functional armrests. They are not
made for sitting on.
Ottoman with functional side part:
The ottomen with functional side part can be placed to
build a rectangular lie-down area in connection with
the one arm chaises with functional side part or with
the sofa with functional side part. GF 065 + KF 07 or PF
06; GF 075 + KF 06 or PF 07. The ottomen can also be
placed separately.
Ottoman GF 004:
The withd of the ottoman GF 004 is extendible up to
167 cm. There is a huge storage capacity under the
seating surface. The intermediate table UG 004
changes the ottoman into a table. It can be ordered as
an option. Ottomen with function do not have coil
springs in the seat. The wooden board of the
intermediate table is available in different stain tones
and gloss paints. Please indicate the desired wood
colour when ordering.
Back sides of sofas:
All pieces are genuinely upholstered at the back.
Positioning diagram:
Please send us a positioning diagram, depending on
the many different variations available. We have
marked the connecting sides in red for end elements in
the type guide.
Connecting sides:
For an upcharge, the connecting sides can be supplied
in the original cover instead of stretch fabric. See
opening paragraph for prices.
Seam offset:
If elements with a normal seat depth are combined
with elements with an extra deep seat depth, please
note that the seams will not be in a line.
Seam appearance:
Decorative, felled or double seams may appear
different in fabric or leather versions. For manufacturing reasons, seams may be left out of the fabric
version or replaced with simple seams.
Contrasting thread:
In some leather colours, this model can be supplied
with contrasting-colour thread, at no upcharge. The
colours as given can be found on the leather wal in the
studio. Please always specify the contrasting thread
number or tonal colours will be supplied.
Recommendation:
We recommend the tables from the model ranges
10012, 40001, 40021 and 40024 as an accessory. We
recommend the armchair no. 10260 [stan] as an
occasional furniture. As storage place onto the ottmen
G 003 and G 004 we recommend the plexiglass cover
L010 or a roll mat fom model range 10006.
All of the dimensions given are approximate.
dimensions in cm. We reserve the right to make
changes. Dimensions are given as follows: width/
depth/height/seat height and refer to the leg
height ca. 13 cm.
Seat depth: ca. 59 cm
Seat depth for articles with appendix “L” (except one
arm chaises): ca. 69 cm
KF 06/07, one arm chaise with functional side part:
width ca. 96 cm, if side part is folded down ca. 119 cm
Chromatic aberrations:
The wooden structure is different from ordering to
ordering. Deliveries after colour samples are basically
excluded from complaints and exchange. We take care
of the best correspondence possible.
Crease formation:
Fabric and leather stretch to a lesser or greater extent
under the influence of body weight, which can lead to
the formation of creases in the cover. This visual
change does not affect use, function and life span and
it is not a defect.
3
Contrasting thread
In some leather colours this
model can be supplied with
contrasting-colour thread, at
no upcharge.
Order checklist
• Structure and cover
• Leg design
• Leg height
• Leg colour with wooden/metal legs
• Colour for intermediate table UG 004
• Castors for ottomen and chaise (upcharge)
• Positioning diagram
• Seam offset
• Contrasting thread
• Pillows
• Ottomen
• Ottoman panel (order information)
22 0 7 0 ta b oo
Up ho l s t e re d fu rn itu r e f r ame str u c tu r e
1. Frame - Beech wood structure
2. Seat suspension with permanently elastic wave springs
3. Seat upholstery structure – spring core with diolen cover
incorporated into ergo-PUR-foam
4. Back suspension with upholstery strap
5. Back upholstery structure of ergo-PUR-foam with diolen
cover
The design of the cross section shown here does not
correspond to the model on this page of the catalogue.
Le g s
ca. 13 cm/
seat height
ca.
41 cm
ca. 15 cm/
seat height
ca.
43 cm
wooden leg,
lacquered
metal leg brushed
matt
metal leg brushed
matt
metal runner
high-gloss chrome
metal castor/
ottoman, upcharge
F 57
F 62
F 75
F 1B
F 6R
wooden leg,
lacquered
metal leg brushed
matt
metal leg brushed
matt
metal runner
high-gloss chrome
metal castor/
ottoman, upcharge
F 4A
F 4D
F 1Q
F 1F
F 7R
double plastic
castor (2 cm taller)
F 60
Leg and seat heights:
Due to different leg heights, the model is
available in different seat and total
heights. The leg design has to be
indicated.
Leg colours:
The wooden legs/ partly wooden legs are
available in a choice of different stain
shades and varnish colours. We are happy
to advise you.
Runners:
We assemble optically matching legs
instead of the runner at the front of the
enlarged seat of the one arm chaises. The
metal runner is not possible with the
ottomen for manufacturing reasons.
Castors for ottomen:
Every ottoman can be equipped with
castors for upcharge. The item number is
marked with an “R” (e.g. G ...R). Two of
the castors can be fixed. Please note that
the castors are available in two different
heights, whereby the height of the
castors does not correspond to that of
the bases. In the case of castors, the
required height is then achieved by
custom manufacture. Instead of the metal
castors, the plastic castors F 60 (5 cm
height) are assembled to the ottoman GF
004.
Upholstered
furniture
made with passion.
Your model is the product
of German design and engineering. Family firm
W.SCHILLIG has over 65
years’ experience of technical skill, trend-setting
ideas, attractive design
and know-how from Germany. The result is upholstered furniture that guarantees first class comfort
and attention to detail.
We keep sustainability
and protection of resources in mind when choosing
the materials we use.
The RAL quality mark for furniture
stands for the certain knowledge
that this is a non-hazardous piece
of furniture of reliably high quality
and with an attractive design. The
Deutsche Gütegemeinschaft Möbel
makes sure of this with numerous
tests. Inspections also safeguard
the testing system.
In-house manufacture conforming
to the specifications of the quality
management system in line with
ISO 9001, to safeguard internal
processes.
The highest European accolade for systematic, inhouse,
environmental
management. Concrete
improvement of environmental protection services, tested adherence to legislative
provisions and transparency that
everybody can understand through
environmental reporting.
No. 106538
ˈɜ:ban:staɪl Trendiger Lifestyle
Innovation paired with exclusive comfort-functions. These sofas adapt
to a wide range of living situations and are complemented by
imaginative extras. Persuasively high level of comfort.
Created 22. 06. 2016
4
No. 106538
Designates a fair company that manufactures sustainable products. A
fair way of working with nature
and natural resources, with society,
employees and business partners.
Consciously
environmentally
friendly and resource-sparing manufacture of products.