Wharfedale Pro General Brochure

Comments

Transcription

Wharfedale Pro General Brochure
Wharfedale Pro
General Brochure
2013
Loudspeakers Electronics Microphones
www.wharfedalepro.com
Thank you for your interest in the 2013 product range from Wharfedale Pro.
Britain has long been recognised throughout the world as being the home of
loudspeaker technology in terms of innovation and quality. This reputation was
established over many years by some of the worlds most famous loudspeaker
manufacturers. Wharfedale, founded over 80 years ago, has always been at the
forefront of developing this reputation.
Wharfedale Pro is a specialised division that designs and manufactures pro and
commercial audio equipment, from portable and touring to fixed installation sound
systems. Wharfedale Pro offer a comprehensive product range that ensures
every stage of the signal path is catered for, enabling turnkey solutions based on
Wharfedale Pro equipment, from microphone to loudspeaker.
Wharfedale Pro is committed to equip artists and contractors alike with the tools
they need to flourish in their respective field, providing class leading performance
at down to earth prices.
Wharfedale Pro employs specialised teams to undertake every stage of a products
lifecycle, from design and manufacture to marketing, sales, logistics and distribution
on a global scale. All products are produced in our privately owned cutting edge
vertically integrated factory ensuring that quality control from component level
through to end product is second to none, resulting in a finished product just as the
designers intended.
LOUDSPEAKERS
SHO
DELTA
TitanTM
EVP-X
EVP-R
VECTOR
KINETIC
KINETIC ACTIVE
WPM-1
DIAMOND
EZGO
1
3
5
7
9
11
13
15
17
18
19
SHO
Loudspeakers
Ultra High Power Loudspeakers for Sound Reinforcement and
Reproduction
SHO represents the pinnacle of modern loudspeaker design. SHO incorporates advanced features such as oversized
cones and surrounds, ultra sophisticated heatsinks and 5” voice coils. By incorporating these ground-breaking technologies
SHO loudspeakers can deliver punishing level all night long without the faintest hint of fatigue. Our revolutionary constant
directivity waveguide design provides tight pattern control, with a horn that can be rotated by 90°.
A range of cabinet types with different driver and waveguide configurations are available to ensure that you can specify the
correct speaker for the job. SHO is an ideal, cost effective solution for demanding installations or touring applications that
require extreme sound pressure levels for extended periods.
Key Features
• 5" Voice Coils
• 17% more radiating area and bass power
• Tight pattern control
• Advanced heat dispersion technology
• Rotatable constant directivity horns
• Pure Titanium HF driver diaphragm
• Neodymium Iron Boron LF driver magnet
Full Range
1
SH1294
SH1294M
12" LF, 90 x 40 HF dispersion, 8 ohms
Impedance, 55Hz-20kHz, 95dB([email protected]),
Power Rating: 1000W Continuous,
2000W Music, 4000W Peak,
Product Dimension (H x W x D):
(MM): 555 x 375 x 425
(inches): 21.85" x 14.76" x 16.73"
Carton Dimension (H x W x D):
(MM): 658 x 447 x 494
(inches): 25.90" x 17.60" x 19.45"
Net Weight: 31.00kg/68.20lbs
Gross Weight: 36.00kg/79.20lbs
12" LF, 90 x 40 HF dispersion, 8 othms
Impedance, 55Hz-20kHz, 95dB([email protected]),
Power Rating: 1000W Continous,
2000W Music, 4000W Peak,
Product Dimension (H x W x D):
(MM): 570 x 375 x 332
(inches): 22.44" x 14.76" x 13.07"
Carton Dimension (H x W x D):
(MM): 652 x 440 x 378
(inches): 25.67" x 17.32" x 14.90"
Net Weight: 25.00kg/55.00lbs
Gross Weight: 30.00kg/66.00lbs
SHO
Loudspeakers
SH2264
SH2596
2 x 12" LF, 60 x 40 HF dispersion, 4 ohms
Impedance, 40Hz-20kHz, 99dB([email protected]),
Power Rating: 2000W Continuous,
4000W Music, 8000W Peak,
Product Dimension (H x W x D):
(MM): 962 x 375 x 425
(inches): 37.87" x 14.76" x 16.73"
Carton Dimension (H x W x D):
(MM): 1045 x 435 x 482.5
(inches): 41.20" x 17.10" x 19.00"
Net Weight: 50.00kg/110.00lbs
Gross Weight: 56.00kg/123.20lbs
2 x 15" LF, 90 x 60 HF dispersion, 4 ohms
Impedance, 35Hz-20kHz, 98dB([email protected]),
Power Rating: 2000W Continuous,
4000W Music, 8000W Peak,
Product Dimension (H x W x D):
(MM): 1166 x 438 x 440
(inches): 45.90" x 17.24" x 17.32"
Carton Dimension (H x W x D):
(MM): 1250 x 498 x 495
(inches): 49.20" x 19.60" x 19.50"
Net Weight: 56.00kg/123.20lbs
Gross Weight: 64.00kg/140.80lbs
SH1564
SH1596
15" LF, 60 x 40 HF dispersion, 8 ohms
Impedance, 45Hz-20kHz, 96dB([email protected]),
Power Rating: 1000W Continous,
2000W Music, 4000W Peak,
Product Dimension (H x W x D):
(MM): 750 x 438 x 440
(inches): 29.52" x 17.24" x 17.32"
Carton Dimension (H x W x D):
(MM): 832 x 498 x 495
(inches): 32.80" x 19.60" x 19.50"
Net Weight: 39.00kg/85.80lbs
Gross Weight: 45.50kg/100.1lbs
15" LF, 90 x 60 HF dispersion, 8 ohms
Impedance, 45Hz-20kHz,96dB([email protected]),
Power Rating: 1000W Continuous,
2000W Music, 4000W Peak,
Product Dimension (H x W x D):
(MM): 750 x 438 x 440
(inches): 29.52" x 17.24" x 17.32"
Carton Dimension (H x W x D):
(MM): 832 x 498 x 495
(inches): 32.80" x 19.60" x 19.50"
Net Weight: 39.00kg/85.80lbs
Gross Weight: 45.50kg/100.1lbs
SH2296
SH2564
2 x 12" LF, 90 x 60 HF dispersion, 4 ohms
Impedance, 45Hz-20kHz, 99dB([email protected]),
Power Rating: 2000W Continuous,
4000W Music, 8000W Peak,
Product Dimension (H x W x D):
(MM): 962 x 375 x 425
(inches): 37.87" x 14.76" x 16.73"
Carton Dimension (H x W x D):
(MM): 1045 x 435 x 482.5
(inches): 41.20" x 17.10" x 19.00"
Net Weight: 50.00kg/110.00Ibs
Gross Weight: 56.00kg/123.20lbs
2 x 15" LF, 60 x 40 HF dispersion, 4 ohms
Impedance, 35Hz-20kHz, 98dB([email protected]),
Power Rating: 2000W Continuous,
4000W Music, 8000W Peak,
Product Dimension (H x W x D):
(MM): 1166 x 438 x 440
(inches): 45.90" x 17.24" x 17.32"
Carton Dimension (H x W x D):
(MM): 1250 x 498 x 495
(inches): 49.20" x 19.60" x 19.50"
Net Weight: 56.00kg/123.20lbs
Gross Weight: 64.00kg/140.80lbs
Subwoofers
SH1500
SH1800
SH2800
15" LF, 8 ohms Impedance, 45Hz-200Hz,
96dB([email protected]),
Power Rating: 1000W Continuous,
2000W Music, 4000W Peak,
Product Dimension (H x W x D):
(MM): 456 x 640.5 x 660.5
(inches): 17.95" x 25.21" x 26.00"
Carton Dimension (H x W x D):
(MM): 531 x 700 x 720
(inches): 20.90" x 27.60" x 28.30"
Net Weight: 44.00kg/96.80lbs
Gross Weight: 48.00kg/105.60lbs
18" LF, 8 ohms Impedance, 42Hz-300Hz,
98dB([email protected]),
Power Rating: 1000W Continuous,
2000W Music, 4000W Peak,
Product Dimension (H x W x D):
(MM): 532 x 641 x 822
(inches): 20.94" x 25.23" x 32.38"
Carton Dimension (H x W x D):
(MM): 607 x 700 x 882
(inches): 23.90" x 27.60" x 34.70"
Net Weight: 50.50kg/ 111.10lbs
Gross Weight: 62.50kg/137.50lbs
2 x 18" LF, 4 ohms Impedance, 35Hz-300Hz,
102dB([email protected]),
Power Rating: 2000W Continuous,
4000W Music, 8000W Peak
Product Dimension (H x W x D):
(MM): 601 x 1030 x 870
(inches): 23.66" x 40.55" x 34.25"
Carton Dimension (H x W x D):
(MM): 676 x 1090 x 930
(inches): 26.60" x 42.90" x 36.60"
Net Weight: 94.00kg/206.80lbs
Gross Weight: 113.00kg/248.60lbs
2
Delta
Loudspeakers
Delta has been designed from the ground up to provide outstanding performance and reliability. Delta utilises robust technology
and durable components to ensure that it can meet the demands of touring, rental and fixed installation applications.
High output, low distortion cast frame woofers with 3” voice coils are used throughout the range for unparalled low
frequency reproduction. 2” titanium compression drivers are coupled to 90° x 45° elliptical waveguides for impressive output
level and smooth HF dispersion.
Comprehensive rigging points are provided for use in flown applications, so Delta is equally at home in a wide variety of
fixed installation and touring applications. Rhino Rock™, our new texturised composite finish is used in all models. This new
finish provides the great look of a painted finish with the durability of a carpet covered enclosure giving you the best of both
worlds. The Delta Series is constructed from plywood and features dual angle pole mounts to ensure that your sound is
aimed directly at the audience, not at the ceiling.
Key Features
• High power, low distortion cast frame woofers
• 1.4” exit 2” titanium diaphragm compression drivers
• 90° x 45° elliptical waveguides
• Dual angle pole mount receptacles
• Rhino Rock™ textured composite finish
• Plywood construction
• Dual spider technology on 18” woofers
• Rubberised 4-way handles
• Rigging points on Delta 12 and 15
Full Range
3
Delta 10
Delta 12
2-way, 10" High Power, Low Distortion
Cast Frame Woofer, 65-20kHz Frequency
Response(+/-3dB),
8 ohms Impedance,Bi-Amp,97dB([email protected]),
Power Rating: 300W Continuous,
600W Music, 1200W Peak
Product Dimension (H x W x D):
(MM): 500 x 338/212.4 x 330
(Inches): 19.7" x 13.3"/8.4" x 13"
Carton Dimension (H x W x D):
(MM): 575 x 400/300 x 386
(Inches): 22.6" x 15.7"/11.8" x 15.2"
Net Weight: 16.58Kg/36.5lbs
Gross Weight: 19.6Kg/43.0lbs
2-Way, 12" High Power Woofer, 60-20kHz
Frequency Response (+/-3dB),
8 ohms Impedance, Bi-Amp, 97dB ([email protected]),
Power Rating: 400W Continuous,
800W Music, 1600 Peak
Product Dimension (H x W x D):
(MM): 630 x 390/241 x 373
(inches): 24.80" x 15.30"/9.50" x 14.70"
Carton Dimension (H x W x D):
(MM): 733 x 566 x 464
(inches): 28.90" x 22.30" x 18.30"
Net Weight: 24.70kg/54.34lbs
Gross Weight: 29.00kg/63.80lbs
Delta
Loudspeakers
Delta 15
Delta 12M
2-Way, 15" High Power Woofer,
50-20kHz Frequency Response (+/-3dB),
8 ohms Impedance,
Bi-Amp, 98dB ([email protected]),
Power Rating: 500W Continuous,
1000W Music, 2000 Peak
Product Dimension (H x W x D):
(MM): 700 x 446/281.4 x 406
(inches): 27.60" x 17.60"/11.10" x 16.00"
Carton Dimension (H x W x D):
(MM): 803 x 622 x 498
(inches): 31.60" x 24.50" x 19.60"
Net Weight: 29.90kg/65.78lbs
Gross Weight: 35.50kg/78.10lbs
2-Way monitor, 12" High Power Woofer,
60-20kHz Frequency Response (+/-3dB),
8 ohms Impedance,
Bi-Amp, 97dB ([email protected]),
Power Rating: 400W Continuous,
800W Music, 1600 Peak
Product Dimension (H x W x D):
(MM): 449 x 390 x 618
(inches): 17.70" x 15.30" x 24.30"
Carton Dimension (H x W x D):
(MM): 462 x 690 x 522
(inches): 18.20" x 27.20" x 20.60"
Net Weight: 23.18kg/50.99lbs
Gross Weight: 28.50kg/62.70lbs
Delta 15M
Delta 215
2-Way monitor, 15" High Power Woofer,
55-20kHz Frequency Response (+/-3dB),
8 ohms Impedance,
Bi-Amp, 98dB ([email protected]),
Power Rating: 500W Continuous,
1000W Music, 2000 Peak
Product Dimension (H x W x D):
(MM): 493 x 446 x 685
(inches): 19.40" x 17.60" x 27.00"
Carton Dimension (H x W x D):
(MM): 518 x 757 x 565
(inches): 20.40" x 29.80" x 22.20"
Net Weight: 27.24kg/59.92lbs
Gross Weight: 33.96kg/74.71lbs
Quasi 3-Way, 2 x 15" High Power Woofer,
45-20kHz Frequency Response (+/-3dB),
4 ohms Impedance,
Bi-Amp, 101dB ([email protected]),
Power Rating: 1000W Continuous,
2000W Music, 4000 Peak
Product Dimension (H x W x D):
(MM): 1135 x 488/299.6 x 450
(inches): 44.70" x 19.20"/11.80" x 17.70"
Carton Dimension (H x W x D):
(MM): 1218 x 558 x 522
(inches): 48.00" x 22.00" x 20.60"
Net Weight: 52.90kg/116.38lbs
Gross Weight: 59.00kg/129.80lbs
Subwoofers
Delta 15B
Delta 18B
Delta 218B
15" subwoofer, 8 ohms Impedance,
98dB ([email protected]),
Bi-Amp: 42-2kHz, Passive: 42-150Hz
Power Rating: 700W Continuous,
1400W Music, 2800 Peak
Product Dimension (H x W x D):
(MM): 471 x 471 x 600
(inches): 18.50" x 18.50" x 23.60"
Carton Dimension (H x W x D):
(MM): 556 x 672 x 543
(inches): 21.90" x 26.50" x 21.40"
Net Weight: 31.50kg/69.30lbs
Gross Weight: 35.12kg/77.26lbs
18" subwoofer, 8 ohms Impedance,
99dB ([email protected]),
Bi-Amp: 38-1.5kHz, Passive: 38-150Hz
Power Rating: 800W Continuous,
1600W Music, 3200 Peak
Product Dimension (H x W x D):
(MM): 539 x 539 x 650
(inches): 21.20" x 21.20" x 25.60"
Carton Dimension (H x W x D):
(MM): 624 x 722 x 611
(inches): 24.60"x 28.40" x 24.10"
Net Weight: 37.30kg/82.06lbs
Gross Weight: 43.20kg/95.04lbs
2 x 18" Dual Chamber subwoofer, 100dB ([email protected]),
30-1.5kHz Frequency Response (+/-3dB),
Parallel: 4 ohms,
Discrete: 2 x 8ohms system Impedance,
Power Rating: 1600W Continuous,
3200W Music, 6400 Peak
Product Dimension (H x W x D):
(MM): 541 x 1041 x 650
(inches): 21.30" x 41.00" x 25.60"
Carton Dimension (H x W x D):
(MM): 626 x 1126 x 722
(inches): 24.60" x 44.30" x 28.40"
Net Weight: 78.90kg/173.58lbs
Gross Weight: 86.00kg/189.20lbs
4
Titan
TM
Loudspeakers
Ultra-Lightweight, Class Leading Performance
The Titan™ Series are ultra-lightweight, portable loudspeakers suitable for the widest range of applications. Initially designed
for the portable live sound market the Titan has also been a runaway success in the fixed installation sector. All models in the
range are suitable for both sound reinforcement and reproduction of foreground / background music and speech.
The very best custom designed and built components are used throughout the Titan™ range. From the gas assist injection
moulded enclosures to the moisture proof woofers, every element is designed specifically for the loudspeaker it features in.
The gas assist injection moulding and internal laminar flow ribs make the enclosure lighter and much more rigid than any
competitor, aiding transportation and the reproduction of low frequencies.
The Titan™ enclosure boasts a number of mounting options, including a lockable pole mount socket. A range of optional
mounting accessories are available.
Key Features
• 2-way reflex systems
• 3 Passive and 3 Active models + 2 Powered Subs
• Low distortion, high power woofers
• XLR output for connecting to another powered speaker
(Active only)
• RCA inputs for MP3, CD or other line level devices
(Active only)
• 90° x 60° degree integral Elliptical Wave Guide
• Power On LED indicator in horn throat and back panel
(Active only)
• Active signal limiting system with LED indicator (Active only)
• DTF TM Dynamic Thermal Filament HF driver protection
• Lightweight, high strength Polypropylene cabinet
• Integral 35mm (1-3/8") stand socket
• M6, M8 & M10 hanging points
• Accommodates OmniMount ® 30.0 bracket (TitanTM 8) & 60.0
bracket (TitanTM 12 & 15)
• Built in, rubberized easy-grip handles for convenient
transportation
Full Range
5
Titan 8 Passive
Titan 8 Active MKII
2-way passive speaker system, 8 inch
woofer, 8 ohms, 70Hz-20kHz (+/-3dB),
96dB ([email protected]), 90 x 60 EWG
Power Rating: 150W Continuous,
300W Music, 600W Peak
Product Dimension (H x W x D):
(MM): 396 x 266 x 221
(inches): 15.59" x 10.47" x 8.70"
Carton Dimension (H x W x D)
(MM): 485 x 339 x 294
(inches): 19.10" x 13.35" x 11.57"
Net Weight: 5.50kg/12.10lbs
Gross Weight: 7.50Kg/16.50lbs
Active 8'' 2-way Bi-Amplified,
AC 100~240V, 50/60Hz,
Low frequency power (Class D):
150W RMS, 300W Peak,
High frequency power (Class D):
30W RMS, 60W Peak, 90 x 60 EWG
Product Dimension (H x W x D)
(MM): 396 x 266 x 221
(inches): 15.60" x 10.50" x 8.70"
Carton Dimension (H x W x D)
(MM): 485 x 339 x 294
(inches): 19.09" x 13.35" x 11.57"
Net Weight: 6.25kg/13.75lbs
Gross Weight: 8.15kg/17.93lbs
Titan
TM
Loudspeakers
Titan 12 Passive
Titan 12D
12" LF, 2-way, 8W, 55-20kHz (+/-3dB),
98dB ([email protected]), 90 x 60 EWG
Power Rating: 250W Continuous,
500W Music, 1000W Peak
Product Dimension (H x W x D):
(MM): 556 x 384 x 312
(inches): 21.88" x 15.10" x 12.30"
Carton Dimension (H x W x D):
(MM): 663 x 435 x 408
(inches): 26.10" x 17.13" x 16.06"
Net Weight: 12.00kg/26.40lbs
Gross Weight: 13.72kg/30.18Ibs
12" 2-way Bi-Amplified, 55-20kHz
AC 100~120V/220~240V, 50/60Hz,
Frequency Response (+/-3dB)
Balanced: 10kW; Unbalanced: 5kW
Low Frequency Power Amplifier:
250W RMS (class D):
High Frequency Power Amplifier:
50W RMS (class D):
Product Dimension (H x W x D):
(MM): 556 x 384 x 312
(inches): 21.90" x 15.10" x 12.30"
Carton Dimension (H x W x D):
(MM): 663 x 435 x 408
(inches): 26.10" x 17.13" x 16.06"
Net Weight: 12.40kg/27.28lbs
Gross Weight: 15.50kg/34.10lbs
Titan 15 Passive
Titan 15D
2-way speaker system, 15" woofer,
8 ohms, 50-18kHz (+/-3dB),
97dB ([email protected]), 90 x 60 EWG
Power Rating: 400W Continuous,
800W Music, 1600W Peak
Product Dimension (H x W x D):
(MM): 708.3 x 477.8 x 401.8
(inches): 27.90" x 18.80" x 15.80"
Carton Dimension (H x W x D):
(MM): 736 x 514 x 489
(inches): 28.90" x 20.20" x 19.25"
Net Weight: 22.00kg/48.40lbs
Gross Weight: 25.00kg/55.00Ibs
15" 2-way Bi-Amplified, 50-20kHz
AC 100~120V/220~240V, 50/60Hz,
Frequency Response (+/-3dB)
Balanced: 10k ohms Unbalanced: 5kW
Low Frequency Power Amplifier:
350W RMS (class D),
High Frequency Power Amplifier:
70W RMS (class A/B)
Product Dimension (H x W x D):
(MM): 708.3 x 477.8 x 401.8
(inches): 27.90" x 18.80" x 15.80"
Carton Dimension (H x W x D):
(MM): 736 x 514 x 489
(inches): 28.98" x 20.24" x 19.25"
Net Weight: 22.90kg/50.38lbs
Gross Weight: 27.70kg/60.94lbs
Titan 312A
Titan 315A
Active 12" 2-way Bi-Amplified,
AC 100V-120V~/220V-240V~,50/60Hz,
Low Frequency Power (Class D):
150W RMS, 250W Peak
High Frequency Power (Class D):
50W RMS, 100W Peak
Product Dimension (H x W x D):
(MM): 556 x 384 x 312
(Inches): 21.88" x 15.11" x 12.28"
Carton Dimension (H x W x D):
(MM): 663 x 435 x 408
(Inches): 26.1" x 17.1" x 16.1"
Net Weight: 10.8kg/23.76lbs
Gross Weight: 13.9kg/30.58bs
Active 15" 2-way Bi-Amplified,
AC 100V-120V~/220V-240V~,50/60Hz,
Low Frequency Power (Class D):
150W RMS, 250W Peak
High Frequency Power (Class D):
50W RMS, 100W Peak
Product Dimension (H x W x D):
(MM): 708.3 x 477.8 x 401.8
(Inches): 27.9" x 18.8" x 15.8"
Carton Dimension (H x W x D):
(MM): 830 x 514 x 489
(Inches): 32.7" x 20.3" x 19.3"
Net Weight: 17.86kg/39.3lbs
Gross Weight: 22.6kg/49.72lbs
Subwoofers
All TitanTM Subwoofers Are Available With Grey Or Black Finishes
Titan Sub A12
Titan Sub A15
12" LF, Reflex subwoofer, 4 ohms,
55-200Hz (+/-3dB),
Power Rating: 250W Continuous,
500W Peak,
Product Dimension (H x W x D):
(MM): 360 x 493 x 431
(inches): 14.20" x 19.40" x 16.90"
Carton Dimension (H x W x D):
(MM): 445 x 503 x 565
(inches): 17.52" x 19.80" x 22.24"
Net Weight: 22.31kg/49.08lbs
Gross Weight: 26.26kg/57.77Ibs
15" LF, Band-pass subwoofer, 4 ohms,
45-150Hz +(+/-3dB),
Power Rating: 400W Continuous,
600W Peak,
Product Dimension (H x W x D):
(MM): 630 x 478 x 640
(inches): 24.80" x 18.80" x 25.20"
Carton Dimension (H x W x D):
(MM): 735 x 553 x 738
(inches): 28.94" x 21.77" x 29.06"
Net Weight: 45.48kg/100.05lbs
Gross Weight: 50.26kg/110.57Ibs
6
EVP-X
Loudspeakers
EVP-X provides excellent sound quality and reliability, it is ideal for
almost any application.
The EVP-X Series provides you with durable, workhorse loudspeakers suitable for a wide range of sound reproduction and
reinforcement applications.
The EVP-X Series is built around an advanced Elliptical Waveguide coupled to a 44mm titanium HF compression driver.
The high frequency performance and transducer reliability is unprecedented in this product class. Our custom designed,
propreitary drivers are characterised by their extended frequency response and excellent durability.
Our high-voltage crossover design uses high grade components
Key Features
• 90°x60° Elliptical Waveguides (Full Range Models)
• High Output, Low Distortion Transducers
• Full Length Powder Coated Steel Grilles
• High Frequency Driver Protection
• High Voltage Crossovers
• Trapezoidal Enclosures
• Alloy Pole Mount Receptacles
• High Frequency Boost Switch (+3dB)
• High Pass Output (Subwoofers)
• Signal And HF Protect LED Indicators (Full Range Models)
EVP-X
Loudspeakers
Loudspeakers
EVP-X12
EVP-X15
12" LF , 2 Way FOH, 8 ohms, 55-20kHz
(+/-3dB), 98dB ([email protected]),
Power Rating: 250W Continuous,
500W Music, 1000W Peak
Product Dimension (H x W x D):
(MM): 590 x 430/297.5 x 370
(inches): 23.20" x 16.90"/11.70" x 14.60"
Weight: 19.30kg/42.46Ibs
Cube(CBM/CTN): 0.140
15" LF, 2 Way FOH, 8 ohms, 45-20kHz
(+/-3dB), 98dB ([email protected]),
Power Rating: 300W Continuous,
600W Music, 1200W Peak
Product Dimension (H x W x D):
(MM): 675 x 460/294.5 x 450
(inches): 26.60" x 18.10"/11.50" x 17.70"
Weight: 25.95kg/57.09Ibs
Cube(CBM/CTN): 0.194
EVP-X12M
12" LF Wedge Monitor, 8 ohms,
60-20kHz (+/-3dB), 98dB ([email protected]),
Power Rating: 250W Continuous,
500W Music, 1000W Peak
Product Dimension (H x W x D):
(MM): 560 x 424 x 441
(inches): 22.00" x 16.70" x 17.40"
Weight: 18.50kg/40.70Ibs
Cube(CBM/CTN): 0.172
EVP-X15M
15" LF Wedge Monitor, 8 ohms,
50-20kHz (+/-3dB), 98dB ([email protected]),
Power Rating: 300W Continuous,
600W Music, 1200W Peak
Product Dimension (H x W x D):
(MM): 645 x 445 x 473.5
(inches): 25.40'' x 17.50'' x 18.60''
Weight: 23.40kg/52.0Ibs
Cube(CBM/CTN): 0.214
EVP-X215
15" LF x 2 Quasi 3 Way, 4 ohms,
40-20kHz (+/-3dB), 100dB ([email protected]),
Power Rating: 500W Continuous,
1000W Music, 2000W Peak
Product Dimension (H x W x D):
(MM): 1058 x 502/330 x 467
(inches): 41.60" x 19.80"/13.00" x 18.40"
Weight: 43.20kg/95.04Ibs
Cube(CBM/CTN): 0.319
Subwoofers
EVP-X15B
EVP-X18B
15" subwoofer,4 ohms, 45-250kHz
(+/-3dB), 99dB ([email protected]),
Power Rating: 400W Continuous,
800W Music, 1600W Peak
Product Dimension (H x W x D):
(MM): 591 x 460 x 510
(inches): 23.20" x 18.10" x 20.00"
Weight: 33.50kg/73.70Ibs
Cube(CBM/CTN): 0.220
18" Subwoofer, 4 ohms, 40-200kHz
(+/-3dB), 100dB ([email protected]),
Power Rating: 600W Continuous,
1200W Music, 2400W Peak
Product Dimension (H x W x D):
(MM): 610 x 522 x 610
(inches): 15.50" x 20.60" x 24.00"
Weight: 47.40kg/104.28Ibs
Cube(CBM/CTN): 0.311
8
EVP-R
Loudspeakers
The brand new EVP-R Series has been meticulously designed by the worlds most talented engineers, to offer the very best
sound quality in a robust and portable package.
EVP-R uses new titanium diaphragm HF compression drivers and low distortion, high power woofers, for accurate, detailed
and powerful sound reinforcement and reproduction.
High-impact plastic, 4-way carry handles from our flagship loudspeaker lines are now used, making EVP-R an excellent,
easy to transport choice for the working live musician or rehearsing band. Dual-angle pole mount receptacles are used
throughout the range to ensure that the HF dispersion is perfectly matched to the location of your audience, minimising
early reflections from the ceiling. 90˚x60˚ Elliptical Wave Guides are used, for smooth, predictable coverage and continuity
when mixing different models.
The new low-profile dual angle stage monitors can be positioned at either 40˚ or 55˚ angles to ensure compatibility with
all stage situations, ensuring that as a gigging musician you will get the best sound on stage, night after night. The EVP-R
stage monitors incorporate a Speakon™ connector on each side to facilitate neat parallel wiring along the widest of stages.
We have included a dualangle pole mount receptacle on all stage monitors so they can double up as a neat utility box,
either front-of-house or as a stand mounted drum fill.
Key Features
• Low Distortion, High Power Woofers
• Titanium Diaphragm HF Compression Drivers
• Dual Angle Stage Monitors
• 90˚x60˚ Elliptical Wave Guides
• High-Impact Plastic 4-Way Handles
• Dual Angle Pole Mount Receptacles
• Powder Coated Steel Formed Grilles
• Parallel Wired Speakon™/¼” Jack Combi Inputs
• Parallel Wired Speakon™ Inputs On Each End
(Monitors Only)
• Braced MDF Enclosures
• Tough Black Carpet Finish
EVP-R
Loudspeakers
Full Range
EVP-R10
EVP-R12
10" LF, two-way, 8ohm, 65-20kHz
(+/-3dB), 97dB ([email protected]),
Power Rating: 200W Continuous, 400W
Music, 800W Peak,
Product Dimension (H x W x D):
(MM): 522 x 340/192 x 330
(inches): 20.55" x 13.38"/7.55" x 12.99"
Carton Dimension (H x W x D):
(MM): 588 x 395/280 x 376
(inches): 23.14" x 15.55"/11.02" x 14.80"
Net Weight: 12.70kg/ 27.94lbs
Gross Weight: 14.20ks/ 31.30lbs
12" LF, two-way, 8ohm, 60-20kHz
(+/-3dB), 98dB ([email protected]),
Power Rating: 250W Continuous, 500W
Music, 1000W Peak,
Product Dimension (H x W x D):
(MM): 607 x 400/233 x 364
(inches): 23.89" x 15.74"/9.17" x 14.33"
Carton Dimension (H x W x D):
(MM): 670 x 460/310 x 414
(inches): 26.37" x 18.11"/12.20" x 16.29"
Net Weight: 16.62kg/ 35.60lbs
Gross Weight: 18.90kg/ 41.60lbs
EVP-R12M
EVP-R15M
12" LF, two-way monitor, 8ohm, 65-20kHz
(+/-3dB), 98dB ([email protected]),
Power Rating: 250W Continuous, 500W
Music, 1000W Peak,
Product Dimension (H x W x D):
(MM): 550 x 400 x 314.3
(inches): 21.65" x 15.74" x 12.37"
Carton Dimension (H x W x D):
(MM): 650 x 480 x 415
(inches): 25.59" x 18.89" x 16.33"
Net Weight: 15.20kg/ 33.44lbs
Gross Weight: 18.80kg/ 41.40lbs
15" LF, two-way monitor, 8ohm, 45-20kHz
(+/-3dB), 98dB ([email protected]),
Power Rating: 350W Continuous, 700W
Music, 1400W Peak,
Product Dimension (H x W x D):
(MM): 630 x 446.5 x 373.8
(inches): 24.80" x 17.55" x 14.71"
Carton Dimension (H x W x D):
(MM): 735 x 520 x 475
(inches): 28.93" x 20.47" x 18.70"
Net Weight: 20.50kg/45.10lbs
Gross Weight: 24.00kg/52.80lbs
EVP-R15
EVP-R215
15" LF, two-way, 8ohm, 50-20kHz
(+/-3dB), 98dB ([email protected]),
Power Rating: 350W Continuous, 700W
Music, 1400W Peak,
Product Dimension (H x W x D):
(MM): 685 x 446.5/245.3 x 432.4
(inches): 26.96" x 17.57"/9.65" x 17.02"
Carton Dimension (H x W x D):
(MM): 750 x 500/300 x 485
(inches): 29.52" x 19.68"/11.81" x 19.09"
Net Weight: 21.58kg/ 47.50lbs
Gross Weight: 24.30kg/ 53.50lbs
15" LF, Quasic 3-way, 4ohm, 45-20kHz
(+/-3dB), 100dB ([email protected]),
Power Rating: 700W Continuous, 1400W
Music, 2800W Peak,
Product Dimension (H x W x D):
(MM): 1063 x 446.5/245.3 x 432.4
(inches): 41.85" x 17.57"/9.65" x 17.02"
Carton Dimension (H x W x D):
(MM): 1150 x 520/330 x 496
(inches): 45.27" x 20.47"/12.99" x 19.52"
Net Weight: 35.34kg/77.80lbs
Gross Weight: 38.40kg/84.50lbs
EVP-R15B
EVP-R18B
15" subwoofer, 4ohm, 45-250kHz
(+/-3dB), 99dB ([email protected]),
Power Rating: 400W Continuous, 800W Music, 1600W Peak,
Product Dimension (H x W x D):
(MM): 454 x 562 x 574.4
(inches): 17.87" x 22.12" x 22.61"
Carton Dimension (H x W x D):
(MM): 560 x 650 x 635
(inches): 22.04" x 25.59" x 25.00"
Net Weight: 28.42kg/62.50lbs
Gross Weight: 34.90kg/76.80lbs
18" subwoofer, 4ohm, 40-250kHz
(+/-3dB), 100dB ([email protected]),
Power Rating: 450W Continuous, 900W Music, 1800W Peak,
Product Dimension (H x W x D):
(MM): 531 x 611 x 609.5
(inches): 20.90" x 24.05" x 23.99"
Carton Dimension (H x W x D):
(MM): 640 x 705 x 665
(inches): 25.19" x 27.75" x 26.18"
Net Weight: 34.52kg/75.90lbs
Gross Weight: 40.90kg/89.90lbs
Subwoofers
10
Vector Series
Loudspeakers
Vector was designed from the ground up to meet the demands of professional sound reinforcement. Wharfedale Pro have
raised the bar for mid-format passive enclosures, with a price to performance ratio that exceeds all currently available
loudspeakers.
Vector creates huge sound within a manageable footprint, ensuring portability while providing deep bass, great vocal
projection and a clear top end. Heavy-duty painted enclosures are partnered with our all new, proprietary, low distortion,
high output transducers and bespoke hardware to create a road worthy PA solution that stands above the competition.
The versatile design of the Vector full range enclosures facilitate use as vertically pole mounted FOH loudspeakers or
as stage based wedge monitors, they are real utility boxes that give you maximum versatility whatever the scenario.All
components are designed in house and built from the ground up in Wharfedale’s own vertically integrated factory, providing
the consumer with world class performance and unparalleled value.
Key Features
• Very High SPL Output Capability
• High Sensitivity & Dynamic Range
• Full Range Models Can Be Used As FOH or Stage Monitors
• Custom 90°x 60° HF Waveguides
• Custom High Output, Low Distortion Woofers
• Custom Titanium Compression Drivers
• Dual Layer Voice Coils(VECTOR 18B - Quad Layer)
11
• Heavy Duty, Painted Enclosures
• HF Protection Circuitry
• Parallel Wired Speakon/Jack Combination Inputs
• Dual Angle Pole Mount Receptacles
• Portable Footprint
• 150Hz HPF With Speakon Output (VECTOR 18B)
• Heavy Duty Castors (VECTOR 18B)
VECTOR
Full Range
Vector 12
Passive 2-Way Utility Box, 60-20kHz
Frequency Response (±3dB),
8 ohms Impedance, 98dB ([email protected]),
Power Rating: 300W Continuous,
600W Music, 1200W Peak
Product Dimension (H x W x D):
(MM): 537 x 354 x 328
(Inches): 21.15'' x 13.94'' x 12.91''
Carton Dimension (H x W x D):
(MM): 655 x 465 x 425
(Inches): 25.79'' x 18.31'' x 16.73''
Net Weight: 17.6kg/38.72lbs
Gross Weight: 21.5kg/47.3lbs
Vector 15
Passive 2-Way Utility Box, 50-20kHz
Frequency Response (±3dB),
8 ohms Impedance, 98dB ([email protected]),
Power Rating: 400W Continuous,
800W Music, 1600W Peak
Product Dimension (H x W x D):
(MM): 630 x 435 x 400
(Inches): 24.8'' x 17.13'' x 15.75''
Carton Dimension (H x W x D):
(MM): 745 x 550 x 510
(Inches): 29.33'' x 21.65'' x 20.08''
Net Weight: 25.2kg/55.4lbs
Gross Weight: 29.3kg/64.5lbs
Vector 215
Quasi 3-Way, 45-20kHz Frequency
Response (±3dB),
4ohms Impedance, 100dB ([email protected]),
Power Rating: 800W Continuous,
1600W Music, 3200W Peak
Product Dimension (H x W x D):
(MM): 1060 x 446/225 x 433
(Inches): 41.73'' x 17.56''/8.86'' x 17.05''
Carton Dimension (HxWxD)
(MM): 1180 x 560/340 x 546
(Inches): 46.47'' x 22.05''/13.39'' x 21.5''
Net Weight: 41.6kg/91.5lbs
Gross Weight: 48.4kg/106.5lbs
Subwoofers
Vector 18B
Passive 2-Way Utility Box, 60-20kHz
Frequency Response (±3dB),
8ohms Impedance, 100dB ([email protected]),
Power Rating: 600W Continuous,
1200W Music, 2400W Peak
Product Dimension (H x W x D):
(MM): 554 x 502 x 800
(Inches): 21.81'' x 19.76''x 31.5''
Carton Dimension (H x W x D):
(MM): 660 x 590 x 885
(Inches): 26'' x 23.23'' x 34.84''
Net Weight: 45.1kg/99.2lbs
Gross Weight: 55.6kg/122.3lbs
12
Kinetic
Loudspeakers
Kinetic are passive loudspeakers that offer the next generation of legendary performance that Wharfedale Pro has become
world famous for. Kinetic offers professional features such as compression drivers, custom designed woofers and PTC HF
protection. Speakon/Jack Combination inputs are parallel wired for flexibility and feature throughout the range to ensure
compatibility and seamless integration with both professional and beginner equipment.
The Kinetic Series is suitable for a wide range of applications, they are an ideal choice for small bands or portable DJ’s that
need heavy duty sound reinforcement on a budget.
Key Features
• Low Distortion, High Power Custom Wharfedale Pro Woofers
• HF Compression Drivers
• 90°x60° Elliptical Waveguides
• High Slope Crossover With High Voltage Components
• PTC HF Driver Protection Circuitry
• Low Resonance Enclosures
• Road-Tough Carpet Finish
• High-Impact Plastic Handles
• High-Impact Plastic Pole Mount Receptacles (Steel On Kinetic 153 & 18B)
• Parallel Speakon/¼” Jack Inputs
Full Range
13
Kinetic 8
Kinetic 12
2-Way, 8" LF, 70-20kHz
Frequency Response (+/-3dB),
4 ohm Impedance, 96dB ([email protected]),
Power Rating: 150W Continuous,
300W Music, 600 Peak
Product Dimension (H x W x D):
(MM): 429 x 272.2/149.6 x 253
(inches): 16.90" x 10.70"/5.90" x 9.96"
Carton Dimension (H x W x D):
(MM): 482 x 299/166 x 278
(inches): 18.97" x 11.80"/6.54" x 10.90"
Net Weight: 7.84kg/17.24lbs
Gross Weight: 8.80kg/19.36lbs
2-Way, 12" LF, 60-20kHz
Frequency Response (+/-3dB),
4ohm or 8ohm Impedance, 96dB ([email protected]),
Power Rating: 200W Continuous,
400W Music, 800 Peak
Product Dimension (H x W x D):
(MM): 525 x 362.2/210.1 x 308
(inches): 20.70" x 14.30"/8.27" x 12.13"
Carton Dimension (H x W x D):
(MM): 586 x 426/242 x 348
(inches): 23.07" x 16.80"/9.53" x 13.70"
Net Weight: 12.28kg/27.01lbs
Gross Weight: 13.80kg/30.36lbs
kinetic
Loudspeakers
Kinetic 15
2-way, 15" LF, 50-20kHz
Frequency Response (+/-3dB),
4 ohm or 8 ohm Impedance,
97dB ([email protected]),
Power Rating: 250W Continuous,
500W Music, 1000 Peak
Product Dimension (H x W x D):
(MM): 618 x 437.4/273.5 x 330
(inches): 24.30" x 17.20"/10.77" x 12.99"
Carton Dimension (H x W x D):
(MM): 680 x 502/304 x 370
(inches): 26.77" x 19.76"/11.97" x 14.57"
Net Weight: 17.02kg/37.44lbs
Gross Weight: 18.80kg/41.36lbs
Kinetic 12M
2-way monitor, 12" LF, 60-20kHz
Frequency Response (+/-3dB),
4 ohm or 8 ohm Impedance,
96dB ([email protected]),
Power Rating: 200 W Continuous,
400 W Music, 800 Peak
Product Dimension (H x W x D):
(MM): 380(SITU) x 366 x 525
(inches): 14.96" x 14.40" x 20.70"
Carton Dimension (H x W x D):
(MM): 413 x 568 x 386
(inches): 16.26" x 22.36" x 15.20"
Net Weight: 11.50kg/25.30lbs
Gross Weight: 13.70kg/30.14lbs
Kinetic 153
Kinetic 215
3-way, 15" LF, 50-20kHz
Frequency Response (+/-3dB),
4 ohm Impedance, 98dB ([email protected]),
Power Rating: 300W Continuous,
600W Music, 1200 Peak
Product Dimension (H x W x D):
(MM): 725 x 473.8/293.7 x 360
(inches): 28.54" x 18.65"/11.56" x 14.17"
Carton Dimension (H x W x D):
(MM): 786 x 538/324 x 400
(inches): 30.95" x 21.18"/12.76" x 15.75"
Net Weight: 21.50kg/47.30lbs
Gross Weight: 23.90kg/52.58lbs
Quasi 3-way, 15" LF, 45-20kHz
Frequency Response (+/-3dB),
4 ohm Impedance, 100dB ([email protected]),
Power Rating: 300W Continuous,
600W Music, 1200 Peak
Product Dimension (H x W x D):
(MM): 1004 x 437.4/273.5 x 330
(inches): 39.53" x 17.22"/10.78" x 12.99"
Carton Dimension (H x W x D):
(MM): 1172 x 538/324 x 400
(inches): 46.14" x 21.18"/12.76" x 15.75"
Net Weight: 25.40kg/55.88lbs
Gross Weight: 29.20kg/64.24lbs
Subwoofers
Kinetic 18B
Subwoofer, 18" LF, 45-250Hz
Frequency Response (+/-3dB),
4ohm Impedance, 98dB ([email protected]),
Power Rating: 300W Continuous,
600W Music, 1200 Peak
Product Dimension (H x W x D):
(MM): 512 x 640 x 437
(inches): 20.16" x 25.19" x 17.20"
Carton Dimension (H x W x D):
(MM): 579 x 686 x 483
(inches): 22.79" x 27.00" x 19.00"
Net Weight: 28.74kg/63.22 lbs
Gross Weight: 31.60kg/69.52 lbs
14
Kinetic Active
Loudspeakers
The all new Kinetic Active Series provides unbeatable power in an ultra-portable and cost effective package. The latest
Class-D power amplifier technology is matched to our custom drive units and audiophile crossovers to provide the next
generation of legendary performance that Wharfedale has become world famous for.
The same features as the tried and tested Kinetic passive models ensure durability and great sound quality, with the
convenience and performance benefits that a self-powered, bi-amplified loudspeaker brings. The Kinetic Active Series are
an excellent solution for small bands and portable DJ’s.
Key Features
• Self Powered and Bi-Amplified
• Class D LF and HF Power Amplifiers
• Independent LF and HF Signal Limiting
• Thermal, DC and Short Circuit Fault Protection
• LF and HF EQ Controls
• Integrated 2 Channel Mixer
• 2 x ¼" TRS Jack and XLR Mic/Line Level Inputs
• Rear Panel Mic/Line Switching
• Balanced XLR Line Level Output
• Rear panel LED Limiting Indicator
• Independent Volume Controls
• Rugged Black Carpet Covered Enclosures
Full Range
15
Kinetic 12A
Kinetic 12MA
Active 12" 2-way Bi-Amplified,
AC 100V-120V~/220V-240V~, 50/60Hz
Low Frequency Power (Class D):
220W RMS, 350W Peak
High Frequency Power (Class D):
70W RMS, 140W Peak
Product Dimension (H x W x D):
(MM): 525 x 362.2/210.1 x 308
(Inches): 20.7" x 14.3"/8.27" x 12.13"
Carton Dimension (H x W x D):
(MM): 586 x 426/242 x 348
(Inches): 23.07" x 16.8"/9.53" x 13.7"
Net Weight: 13.26kg/29.2lbs
Gross Weight: 15.56kg/34.2lbs
Active 12" Amplified monitor
AC 100V-120V~/220V-240V~, 50/60Hz
Low Frequency Power (Class D):
400W 4 ohms, 200W 8 ohms RMS,
700W 4 ohms, 400W 8 ohms Peak
Product Dimension (H x W x D):
(MM): 380 x 366 x 525
(Inches): 14.96" x 14.4" x 20.7"
Carton Dimension (H x W x D):
(MM): 413 x 568 x 386
(Inches): 16.26" x 22.36" x 15.2"
Net Weight: 13.68kg/30.1lbs
Gross Weight: 16.08kg/35.4lbs
kinetic Active
Loudspeakers
Kinetic 215A
Kinetic 15A
Active 2 x 15" 2-way Bi-Amplified
AC 100V-120V~/220V-240V~, 50/60Hz
Low Frequency Power (Class D):
400W RMS, 700W Peak
High Frequency Power (Class AB):
70W RMS, 140W Peak
Product Dimension (H x W x D):
(MM): 1004 x 437.4/273.5 x 330
(Inches): 39.53" x 17.22"/10.78" x 12.99"
Carton Dimension (H x W x D):
(MM): 1172 x 538/324 x 400
(Inches): 46.14" x 21.18"/12.76" x 15.75"
Net Weight: 29.42kg/64.7lbs
Gross Weight: 33.2kg/73.04lbs
Active 15" 2-way Bi-Amplified
AC 100V-120V~/220V-240V~, 50/60Hz
Low Frequency Power (Class D):
220W RMS, 350W Peak
High Frequency Power (Class D):
70W RMS,140W Peak
Product Dimension (H x W x D):
(MM): 618 x 437.4/273.5 x 330
(Inches): 24.3" x 17.2"/10.77" x 12.99"
Carton Dimension (H x W x D):
(MM): 680 x 502/304 x 370
(Inches): 26.77" x 19.76"/11.97" x 14.57"
Net Weight: 18.7kg/41.14lbs
Gross Weight: 21.18kg/46.6lbs
Subwoofers
Kinetic 18BA
Active 18” Subwoofer Amplified
AC 100V-120V~/220V-240V~, 50/60Hz
Low Frequency Power (Class D):
300W RMS, 600W Peak
Product Dimension (H x W x D):
(MM): 512 x 640 x 437
(Inches): 20.16" x 25.19" x 17.2"
Carton Dimension (H x W x D):
(MM): 579 x 686 x 483
(Inches): 22.79" x 27.0" x 19.0"
Net Weight: 31.6kg/69.52lbs
Gross Weight: 34.42kg/75.7lbs
16
WPM-1
Loudspeakers
The WPM-1 from Wharfedale Pro is a personal monitoring solution with a number of great features that suit performers and
artists who demand perfect monitor mixes and total control. A 5” full range driver is matched to the on-board processing,
EQ and amplification to provide clear, natural and intelligible vocal foldback.
The WPM-1 can be stand mounted with straight or boom mic stands, alternatively the WPM-1 can be placed on the stage
itself for maximum versatility. Front panel controls allow you to fine tune your onstage vocal sound and the integration of
your monitor mix. With a WPM-1 you no longer get the monitor mix that your engineer supplies, you hear exactly what you
want to hear.
The balanced microphone input has a through output so your performance can be seamlessly integrated into the front
of house mix. The WPM-1 also includes an instrument/line level input and mix output, facilitating use as a small format
personal mixer with 3 inputs. This versatile interfacing allows the WPM-1 to fit into the widest range of on stage situations.
The WPM-1 uses the same high tech gas assist injection moulding techniques as used in our famous Titan
Series loudspeakers, ensuring road tough reliability and ultra light portability.
Key Features
• Microphone, line/instrument and auxiliary inputs
• Microphone thru, line and mix outputs
• Vocal volume and EQ controls
• Independent master and auxiliary level controls
• Switchable output sensitivity
• Ultra lightweight gas assist injection moulded enclosure
• Dual angle mic stand receptacles and microphone mounting system
• IEC receptacle for AC supply
WPM-1
5" Full Range Driver, 120-18kHz, AC 90-240V,
Frequency Response (+/-3dB),
Mic input: -45dBu (-0dBu/-20dBu)
Mic EQ: Peak +/-15dB @ 2.1kHz
Power Rating: 75W Continuous, 150W Music,
Product Dimension (H x W x D):
(MM): 260 x 246 x 182
(inches): 10.23'' x 9.68'' x 7.16''
Carton Dimension (H x W x D):
(MM): 285 x 315 x 330
(inches): 11.22'' x 12.40'' x 12.99''
Net Weight: 3.50kg/7.70Ibs
Gross Weight: 4.90kg/10.78Ibs
1
Diamond
DIAMOND
Loudspeakers
Wharfedale Pro's Diamond Series has a heritage extending over twenty years, throughout its life it has been Britain's bestselling loudspeaker. This pattern has been repeated around the world with 5 star reviews and accolades in every country
in which it has been available. As such the Diamond Series represents a de facto standard for sound quality and balance
in a tremendous number of home stereo and A/V systems.
Built using the Diamond family transducers in specially designed enclosures, and with a custom designed bi-amplification
package, the Diamond Studio Active series is a complete and balanced system for two channel and 5.1 reference
monitoring. Magnetic Shielding of the driver magnets allows close placement of the monitors to CRT displays. Whilst being
true to their sonic heritage, the Studio Pro-Active reference monitors are refined and enhanced for the demands and duties
of the recording business. Tighter enclosure damping and a large cubic volume give better control under high levels found
in monitoring applications.
Key Features
•
•
•
•
•
•
•
•
•
•
Active Bi-amp design with 60W LF and 40W HF output power
Balanced XLR, 1/4" and unbalanced RCA inputs
Precision 25mm (1") soft-dome tweeter
Active electronic crossover for true Bi-amp operation
Bi-directional Kevlar weave woofer cone
Rear-mounted master gain control
Dual-layer vented LF voice coil
Switchable 1/2 space Bass filter
Fully shielded for use near CRT displays
Removable front grille
Diamond 8.1 PRO ACTIVE
Diamond 8.2 PRO ACTIVE
Active 2-way, high-end studio reference monitor,
5" LF plus 1" HF, 60W LF + 40W HF,
50Hz-24kHz frequency response (+/-3dB),
Mains Voltage: 230V Setting: 205-250V
115V Setting: 100-130V
1/4" / XLR combo balanced connector,
1 RCA unbalanced
Product Dimension (H x W x D):
(MM): 295 x 198 x 280
(inches): 11.61" x 7.80" x 11.02"
Weight: 7.50kg/16.50Ibs
Active 2-way, high-end studio reference monitor,
6.5" LF plus 1" HF, 60W LF + 40W HF
45Hz-24kHz frequency response (+/-3dB),
Mains Voltage: 230V Setting: 205-250V
115V Setting: 100-130V
1/4" / XLR combo balanced connector,
1 RCA unbalanced
Product Dimension (H x W x D):
(MM): 364 x 212 x 322
(inches): 14.33" x 8.35" x 12.68"
Weight: 8.00kg/17.60Ibs
18
Loudspeakers
The Wharfedale Pro EZGO is an innovative portable PA solution that is ideal for announcement, presentation and
entertainment applications.
EZGO is simple to use and requires no specialist or technical knowledge to stage a professional performance. Its class
leading usability is matched to genuine professional audio quality. Rapid setup and near non-existent take-down times
ensure that EZGO will always keep your presentation stress free and professional. Audiences of up to 500 people are easily
covered with the 70W amplifier and dual 5” full range drive units.
The EZGO is battery or mains operated and is expandable via optional user installable modules that add USB or wireless
microphone connectivity.
The retractable handle and recessed wheels make transportation easier than ever before, an optional tour bag provides
additional protection during use and transit.
Key Features
• Mains or Battery Operated
• Retractable Luggage Style Carry Handle
• 70W RMS 140W Peak Amplifier
• 2 x 5” Aluminium Cone Full Range Drivers
• Pole Mount Receptacle
• Tuned Port Tube Design
• Optional Wireless Microphone and USB Modules
• XLR Microphone Input
• RCA Line Level Inputs
• Peak and Power and Battery Level LED Indicators
• 3 Band EQ
• DC or IEC AC Receptacle
• Worldwide Switch Mode Power Supply
• Optional Tour Bag
Main Unit
Full range, 60-18kHz,
AC 100~240V, 50/60Hz,
Frequency Response (+/-3dB),
4 ohms Impendance, 98dB ([email protected]),
Power Output: 70W RMS, 140W Peak
Product Dimension (H x W x D):
(MM): 468 x 247 x 360
(inches): 18.43'' x 9.72'' x 14.20''
Carton Dimension (H x W x D):
(MM): 570 x 329 x 464
(inches): 22.45'' x 12.95'' x 18.27''
Net Weight: 12.20kg/26.84lbs
Gross Weight: 14.00kg/30.80lbs
1
Loudspeakers
Optional Function Modules
EZGO-USB
EZGO-RDM
USB Level Input: Infinity to 40dB
Input Sensitivity: -10dBu
USB Drive: Support MP3 and WMA Playback
Supported Sampling Rate: 8kHz, 11.025kHz,
16kHz, 22.05kHz, 32kHz, 44.1kHz, 48kHz
USB to PC: Sound card for playback and
recording on PC or Mac
702-865 MHz Frequency Range,
±0.005% 5 OC ~ +45 OC Frequency Stability
Dimension (D x H):
(MM): Φ53 x 220
(inches): Φ2.09’’ x 8.66’’
Weight: 0.15kg/0.33lbs
EZGO-MIC
Receiving Mode: Point to point receiving
Frequency Range: 702-865 MHz
Bandwidth: 24MHz x 2
Channel Quantity: 100 Channel x 2
Image Rejection Ration: 45dB normal, 50dB maximum
Signal-to-Noise Ratio: ≥95dB (±40kHz frequency
deviation, A-weighted)
Total Harmonic Distortion: ≤1% (1kHz, ±40k frequency
deviation)
Sensitivity: 10dBuV (1kHz, ±40k frequency deviation,
S/N 65dB)
Audio Output: 5.4V (RMS, 1kHz signal, 40kHz frequency
deviation, 47k load)
EZGO-BAG
• Detachable Speaker Cover
• Velcro Flap For Control Panel Access
• Velcro Flap For Retractable Luggage Style Handle
• Detachable Microphone Carry Bag
• Zipper Pouch For Remote Control, Cables and USB Sticks
20
INSTALLATION
LOUDSPEAKERS
SI-X
PROGRAMME
WP
80
90
WLA 12
Diva
ACCESSORIES
23
25
27
28
29
31
33
35
SI-X
Installation Loudspeakers
A Versatile Loudspeaker System for Surface Mount or Flown
Applications
The SI-X Series is a versatile fixed installation loudspeaker system designed for surface mount or flown applications. The
angled low profile enclosures are designed to provide high SPL in an unobtrusive package.
Consistent voicing across the range ensures seamless coverage when using a variety of different models in distributed
sound applications. The SI-X Series feature a 1” exit compression driver on a 70°x 70° conical waveguide providing open
and detailed high frequency extension with even and predictable dispersion.
Because of their multi-faceted design the SI-X speakers can be positioned next to a stage, wall or ceiling. This versatility
suits the SI-X Series to a diverse range of applications such as live performance halls, houses of worship, schools, shops,
restaurants, bars and public houses.
The SI-X Series includes full range enclosures with woofer sizes ranging from 10” to 15”, a dual 8” woofer model is also
available. The full range enclosures are complimented by 3 subwoofers for extended low frequency response and increased
SPL. All models are available in black or white painted finishes and feature multiple M8 rigging points to suit the widest
range of flown applications. Brackets are included as standard.
Key Features
• 70°x70° conical waveguide
• Internally braced MDF cabinets with multiple M8 threaded rigging inserts
• "Coherent Wavefront" design for maximum articulation and flat response
• Five-sided cabinet design for low profile ceiling installation or floor monitor use
• Trapezoidal cabinets for building point-source arrays
• High output, heavy duty woofers
• All models available in paintable Black or White finish
• 44mm (1.7") Titanium diaphragm compression drivers
• Heavy duty foam-backed steel grille
• Dual NL4 parallel input connectors
23
SI-X
Installation Loudspeakers
Full Range
SI-10X
SI-12X
10" 2-way, 60-20kHz frequency
response (+/-3dB), 70 x 70 CWG
8 ohms system impedance
Continuous 200W / Music 400W /
Peak 800W
Product Dimension (H x W x D):
(MM): 512 x 294 x 310
(inches): 20.20" x 11.60" x 12.20"
Carton Dimension (H x W x D):
(MM): 580 x 348 x 358
(inches): 22.80" x 13.70" x 14.10"
Net Weight: 13.60kg/29.92lbs
Gross Weight: 17.00kg/37.40lbs
12" 2-way, 60-20kHz frequency
response (+/-3dB), 70 x 70 CWG
8 ohms system impedance
Continuous 250W / Music 500W /
Peak 1000W
Product Dimension (H x W x D):
(MM): 562 x 344 x 333
(inches): 22.10" x 13.50" x 13.10"
Carton Dimension (H x W x D):
(MM): 630 x 408 x 371
(inches): 24.50" x 16.10" x 14.60"
Net Weight: 16.70kg/36.74lbs
Gross Weight: 20.00kg/44.00lbs
SI-15X
SI-28X
15" 2-way, 50-20kHz frequency
response (+/-3dB), 70 x 70 CWG
8 ohms system impedance
Continuous 400W / Music 800W /
Peak 1600W
Product Dimension (H x W x D)
(MM): 640 x 422 x 396
(inches): 25.20" x 16.60" x 15.60"
Carton Dimension (H x W x D):
(MM): 705 x 482 x 433
(inches): 27.70" x 18.90" x 17.00"
Net Weight: 22.00kg/ 48.40lbs
Gross Weight: 25.00kg/55.00lbs
2x8" 2-way, 60-20kHz frequency
response (+/-3dB), 70 x 70 CWG
4 ohms system impedance
Continuous 250W / Music 500W /
Peak 1000W
Product Dimension (H x W x D):
(MM): 675 x 250 x 300
(inches): 26.60" x 9.80" x 11.80"
Carton Dimension (H x W x D):
(MM): 740 x 338 x 313
(inches): 29.10" x 13.30" x 12.30"
Net Weight: 17.80kg/39.16lbs
Gross Weight: 21.00kg/46.20lbs
Subwoofers
SI-12BX
SI-15BX
SI-18BX
12" horn loaded subwoofer
40-250Hz frequency response (+/-3dB)
4 ohms system impedance
Continuous 300W / Music 600W /
Peak 1200W
Product Dimension (H x W x D)
(MM): 302 x 650 x 545
(inches): 11.90" x 25.60" x 21.50"
Carton Dimension (H x W x D)
(MM): 365 x 715 x 605
(inches): 14.30" x 28.10" x 23.80"
Net Weight: 37.70kg/82.94lbs
Gross Weight: 44.00kg/96.80lbs
15" horn loaded subwoofer
38-220Hz frequency response (+/-3dB)
4 ohms system impedance
Continuous 450W / Music 900W /
Peak 1800W
Product Dimension (H x W x D)
(MM): 266 x 850 x 670
(inches): 10.50" x 33.50" x 26.40"
Carton Dimension (H x W x D)
(MM): 329 x 913 x 733
(inches): 12.90" x 35.90" x 28.90"
Net Weight: 44.60kg/98.12bs
Gross Weight: 53.00kg/116.60lbs
18" subwoofer
30-200Hz frequency response (+/-3dB)
4 ohms system impedance
Continuous 800W / Music 1600W /
Peak 3200W
Product Dimension (H x W x D)
(MM): 620 x 537 x 508
(inches): 24.40" x 21.10" x 20.00"
Carton Dimension (H x W x D)
(MM): 685 x 600 x 575
(inches): 26.90" x 23.60" x 22.60"
Net Weight: 35.50kg/78.10lbs
Gross Weight: 44.00kg/96.80lbs
24
PROGRAMME
Installation Loudspeakers
Hi Fidelity Surface Mount Solutions For The Most Demanding
Architectural Installations
The Programme Series offers hi fidelity surface mount solutions for commercial install applications. Frequency response
has been optimized to be smooth and natural across the vocal range for high intelligibility in difficult environments, while
retaining the neutral and uncoloured sound essential for unobtrusive reproduction of background music. The discreet and
stylish appearance of the Programme Series is designed to seamlessly integrate into any architectural environment.
100v or 70v line models are available throughout the range. The Programme Series features a separate low impedance
input for connection to a low impedance amplifier; a mode switch bypasses the secondary coil of the line transformer,
eliminating insertion loss. The combination of separate input and mode switch also protects the unit from incorrect
connection to a 70/100v line system in low impedance mode.
All models are available with black or white enclosures that can be painted to match any decor.
Programme 105, 108, 205, 206 and 406 all feature M6 rigging points for three point rigging applications and an M8 bracket
point compatible with omni-mount brackets, a wall mounting bracket is included.
Key Features
• 2-way loudspeaker systems
• Custom designed Wharfedale Pro transducers
• 50-250 Watts Continuous Power Handling
• High strength Trapezoidal cabinets
• Pro-tech ® (PTC/Bulb) driver protection
• M6 or M8 rigging points
• Parallel spring crimp, barrier strip or SpeakonTM input
connectors
• Supplied with adjustable heavy duty steel wall bracket
• Models available with an internal 70v/100v Transformer
(‘T’ version)
Full Range
25
PROGRAMME
30E/30ET
PROGRAMME
35E/35ET
2-Way, 5.25" high power woofer
75-20kHz frequency response (+/-3dB)
8 ohms system impedance
Continuous 50W / Music 100W / Peak 200W
Product Dimension (H x W x D):
(MM): 233.5 x 166 x 152
(inches): 9.19" x 6.50" x 6.00"
Carton Dimension (H x W x D):
(MM): 290 x 402 x 223
(inches): 11.40" x 15.90" x 8.78"
Net Weight: 4.50kg(9.90lbs.)/5.12kg(11.20lbs)
Gross Weight: 6.26kg(13.80lbs.)/6.86kg(15.10lbs)
T Version includes line transformer with 2.5, 5,
10W(100V) & 1.25, 2.5, 5 & 10W(70.7V) taps
2-Way, 6.5" high power woofer
65-20kHz frequency response (+/-3dB)
8 ohms system impedance
Continuous 60W / Music 120W / Peak 240W
Product Dimension (H x W x D):
(MM): 275 x 196 x 192
(inches): 10.80" x 7.70" x 7.60"
Carton Dimension (H x W x D):
(MM): 326 x 488 x 256
(inches): 12.80" x 19.20" x 10.10"
Net Weight: 6.20kg(13.60lbs.)/8.06kg(17.70lbs)
Gross Weight: 8.30kg(18.30lbs.)/10.16kg(22.40lbs)
T Version includes line transformer with 10, 20,
40W(100V) & 5, 10, 20, 40W(70.7V) taps
PROGRAMME
Installation Loudspeakers
PROGRAMME 105/105T
PROGRAMME 108/108T
2-way, 5" high power woofer
75-20kHz frequency response (+/-3dB)
8 ohms system impedance
Continuous 80W / Music 160W / Peak 320W
Product Dimension (H x W x D):
(MM): 304 x 184 x 205
(inches): 11.97" x 7.20" x 8.10"
Carton Dimension (H x W x D):
(MM): 379 x 250 x 274
(inches): 14.90" x 9.84" x 10.80"
Net Weight: 5.22kg/11.60Ibs/6.30kg(13.90lbs)
Gross Weight: 6.59kg/14.50Ibs/7.70kg(16.90lbs)
T Version includes line transformer with 15, 30,
60W(100V) & 7.5, 15, 30, 60W(70.7V) taps
2-way, 8" high power woofer
60-20kHz frequency response (+/-3dB)
8 ohms system impedance
Continuous 150W / Music 300W / Peak 600W
Product Dimension (H x W x D):
(MM): 458 x 248 x 275
(inches): 18.00" x 9.80" x 10.80"
Carton Dimension (H x W x D):
(MM): 543 x 311 x 346
(inches): 21.40" x 12.30" x 13.60"
Net Weight: 9.34kg/20.70Ibs/10.80(23.80lbs)
Gross Weight: 12.70kg/27.90Ibs/15.20(33.40lbs)
T Version includes line transformer with 30, 60,
120W(100V) & 15, 30, 60, 120W(70.7V) taps
PROGRAMME 205/205T
2-way, 2 x 5" high power woofers
70-20kHz frequency response (+/-3dB)
8 ohms system impedance
Continuous 100W / Music 200W / Peak 400W
Product Dimension (H x W x D)
(MM): 500 x 184 x 205
(inches): 19.70'' x 7.20'' x 8.10''
Carton Dimension (H x W x D)
(MM): 585 x 250 x 274
(inches): 23.00" x 9.84" x 10.80"
Net Weight: 7.69kg/17.10Ibs/8.09kg(17.80lbs)
Gross Weight: 9.45kg/20.80Ibs/10.46kg(23.00lbs)
T Version includes line transformer with
20, 40, 80W (100V) & 10, 20, 40, 80W (70.7V) taps
PROGRAMME 206/206T
PROGRAMME 406/406T
2-way, 2 x 6.5" high power woofer
65-20kHz frequency response (+/-3dB)
8 ohms system impedance
Continuous 150W / Music 300W / Peak 600W
Product Dimension (H x W x D):
(MM): 660.5 x 215 x 275
(inches): 26.00" x 8.50" x 10.80"
Carton Dimension (H x W x D):
(MM): 745 x 278 x 346
(inches): 29.30" x 10.95" x 13.60"
Net Weight: 11.36kg/25.20Ibs/13.86kg(30.50lbs)
Gross Weight: 14.05kg/30.90Ibs/16.50kg(36.30lbs)
T Version includes line transformer with 30, 60,
120W(100V) & 15, 30, 60, 120W(70.7V) taps
2-way,4 x 6.5" high power woofer
60-20kHz frequency response (+/-3dB)
8 ohms system impedance
Continuous 250W / Music 500W / Peak 1000W
Product Dimension (H x W x D):
(MM): 980 x 215 x 275
(inches): 38.60" x 8.50" x 10.80"
Carton Dimension (H x W x D):
(MM): 1065 x 278 x 346
(inches): 41.93" x 10.95" x 13.60"
Net Weight: 17.80kg/39.60Ibs/20.30kg(44.70lbs)
Gross Weight: 20.95kg/46.10Ibs/23.45kg(51.60lbs)
T Version includes line transformer with 30, 60,
120W(100V) & 15, 30, 60, 120W(70.7V) taps
Subwoofers
PROGRAMME Sub
Bass Reflex Subwoofer, 8 ohms per input / 4 ohms both inputs paralelled,
45Hz -170Hz (-3dB), 98dB (1W(2.83v) @1m) at corner junction,
Power handling (both input driven): 400W,
Power handling (each input driven): 200W,
Product Dimension (H x W x D):
(MM): 372 x 585 x 356
(inches): 14.65" x 23.00" x 14.00"
Carton Dimension (H x W x D):
(MM): 413 x 635 x 392
(inches): 16.25" x 25.00" x 15.40"
Net Weight: 18.40 kg(40.50 lbs.)
Gross Weight: 22.00kg(48.40lbs)
26
WP Series
Loudspeakers
The Wharfedale Pro WP Series is the result of 80 years (from 1932-2012) of experience in the use, design and manufacture
of professional loudspeaker products. We take great pride in its unique V-TECH construction and wide coverage design.
Wharfedale Pro WP Series is the high quality, high power karaoke systems suitable for KTV, TRV and PTV use. All models
are finished with durable finish and equipped with rigging point for hang application. Wharfedale Pro.has the technology
and experience to bridge the worlds of consumer and professional sound.
Key Features
• Lessen the dimension and the weight of the cabinet.
• Increase the whole sound level based on the same diver unit and power.
• Bass response is completely different from traditional loudspeaker. The mid-bass production is powerful and natural,
so is the bass.
• Its high efficiency and quality design of the driver unit allows the high power sound without distortion. WP series is
among the highest power handling karaoke speaker in the market.
• V-TECH construction allows the coverage ranging from 90° x 120° to 0° x 120°and all degree shares balanced
response.
• WP series, the most reliable high quality product, has gone through the latest and high standard test in Wharfedale
Pro Anechoic Chamber.
• Its low loss design of crossover lessens the waste of amplifier power in circuit board and promotes the efficiency.
WP 10
WP 28
2-way, 40-20kHz Frequency Response(+/-10dB)
8 ohms Impedance, 93dB ([email protected]),
Power Rating: 250W Continuous, 500W Music, 1000W Peak
Dimension (H x W x D):
(MM): 504 x 300 x 300
(Inches): 19.84'' x 11.81'' x 11.81''
Net Weight: 13.5kg/29.7lbs
Gross Weight: 14.9kg/32.78lbs
2-way, 55-20kHz Frequency Response(+/-10dB)
8 ohms Impedance, 95dB ([email protected]),
Power Rating: 200W Continuous, 400W Music, 800W Peak
Product Dimension (H x W x D):
(MM): 560 x 260 x 309
(Inches): 22.05'' x 10.24'' x 12.12''
Net Weight: 13.7kg/30.14lbs
Gross Weight: 15.2kg/33.44lbs
WP 45
2-way, 65-20kHz Frequency response(+/-10dB)
8 ohms Impedance, 93dB ([email protected]),
Power Rating: 200W Continuous, 400W Music, 800W Peak
Product Dimension (H x W x D):
(MM): 190 x 292 x 700
(Inches): 7.48'' x 11.5'' x 27.6''
Net Weight: 13.5kg/29.7lbs
Gross Weight: 15.1kg/33.22lbs
2
80
80
Installation Loudspeakers
THE 80 SERIES is the latest model to join Wharfedale's range of professional installation loudspeakers. Its pedigree stems
from the successful Prog. 30D, one of the accepted standards in CD Jukebox extension speaker installation and the ever
popular 2180. It is an attractive 2 way system designed for wall or shelf mounting, equally at home in a portrait or landscape
orientation.
The philosophy behind these loudspeakers is simple. To further extend Wharfedale's reputation for excellent sound quality
whilst employing innovative design to give a distinctive yet discrete appearance to these loudspeaker systems.
Traditionally the loudspeaker placement in rooms has been dominated by the needs of stereo reproduction and
consequently most positions are a compromise enforced by the directionality of conventional loudspeakers.
However, Wharfedale's innovative solution is to use the 'Baker Effect', a phenomenon first noted in the 1930's. By mounting
two hf drive units perpendicular to each other, and carefully contouring the crossover network, Wharfedale has been able to
reproduce a dramatic stereo effect in almost any listening position.
Key Features
• Dual HF Drivers for 'Baker Effect'
• 8" Pulp Cone LF Drivers
• Ferrofluid Cooled Soft Dome HF Drivers
• Auto Resetting Thermal Overload Protection
• 4 Terminal Spring Clip Input Connectors
2080
2180
8ohms, 45Hz-20kHz (+/-3dB), 90dB ([email protected]),
Power Rating: 50W Continuous, 100W Music, 200W Peak,
Product Dimension (H x W x D):
(MM): 274 x 456 x 200
(inches): 10.79" x 17.95" x 7.87"
Carton Dimension (H x W x D):
(MM): 510 x 515 x 335
(inches): 20.07" x 20.27" x 13.18"
Net Weight: 14.84kg/32.64Ibs
Gross Weight: 17.96kg/39.51Ibs
8ohms, 45Hz-20kHz (+/-3dB), 90dB ([email protected]),
Power Rating: 50W Continuous, 100W Music, 200W Peak,
Product Dimension (H x W x D):
(MM): 274 x 456 x 200
(inches): 10.79" x 17.95" x 7.87"
Carton Dimension (H x W x D):
(MM): 505 x 517 x 337
(inches): 19.88" x 20.35" x 13.26"
Net Weight: 15.08kg/33.17Ibs
Gross Weight: 19.50kg/42.90Ibs
3180
4ohms, 45Hz-20kHz (+/-3dB), 92dB ([email protected]),
Power Rating: 90W Continuous, 175W Music, 350W Peak,
Product Dimension (H x W x D):
(MM): 270 x 570 x 290
(inches): 10.63" x 22.44" x 11.42"
Carton Dimension (H x W x D):
(MM): 375 x 615 x 385
(inches): 14.76" x 24.21" x 15.15"
Net Weight: 12.52kg/27.54Ibs
Gross Weight: 16.04kg/35.28Ibs
28
90
Installation Loudspeakers
Developed from the outstandingly successful 2180 series, the new 90 series increases the choice of speakers available
for this specialist application. The 90 series offers increased power handling and impressively high sound pressure levels
from a range of compact boxes. Among six models in the range, the brand new 5090 & 5190 range of robust, efficient
loudspeakers is the ideal systems for Karaoke applications.
The units used in the 2090, 2190, 3190 & 4190 models are an 8 inch (200mm) re-enforced pulp cone woofer and a 25mm
titanium dome HF unit, which is Ferrofluid cooled. All of the designs have auto-resetting thermal overload protection of the
HF units as standard to ensure reliability and all models deliver over a frequency range of 40Hz to 20KHz. The powerful 8
inch (200mm) diameter woofer uses a high temperature 2 inch (50mm) voice coil and a selected pulp cone whilst the 25mm
titanium dome tweeter is loaded by a wide band horn; and is protected by a re-entrant thermal overload system.
The 2090, 2190, 3190 & 4190 commercial loudspeaker's cabinet exterior can be re-painted to match your venue interior and
blend in with the environment. Whilst the units are of a strong and rugged nature, the weight is not unmanageable with the
top, bottom and rear areas on all models clear for bracket mounting.
The new 5090 and 5190 Karaoke systems have wide dispersion extra bass characteristic which is perfectly suitable for
Karaoke applications. The 5090 & 5190 models are intended for wall mounting, though they can be stand mounted. They
can also be flown using the fixing screws in the top of the loudspeakers. Both models are also available in a high quality
piano finish (PU Version) for premium installation applications.
Key Features
•
•
•
•
•
29
HF driver protection circuit
Extensive mounting points
High power output, low distortion sound quality
Easy vertical or horizontal mounting
M10 x13 rigging point for easy installation
90
Installation Loudspeakers
Full Range
2090
2190
8ohms, 40Hz-20kHz (+/-3dB), 90dB ([email protected]),
Power Rating: 100W Continuous, 200W Music, 400W Peak,
Product Dimension (H x W x D):
(MM): 270 x 445 x 220
(inches): 10.63" x 17.52" x 8.66"
Carton Dimension (H x W x D):
(MM): 505 x 660 x 302
(inches): 19.88" x 25.98" x 11.88"
Net Weight: 18.84kg/41.44Ibs
Gross Weight: 25.50kg/56.1Ibs
8ohms, 40Hz-20kHz (+/-3dB), 90dB ([email protected]),
Power Rating: 100W Continuous, 200W Music, 400W Peak,
Product Dimension (H x W x D):
(MM): 270 x 445 x 250
(inches): 10.63" x 17.52" x 9.84"
Carton Dimension (H x W x D):
(MM): 347 x 500 x 323
(inches): 13.66" x 19.68" x 12.71"
Net Weight: 11.02kg/24.24Ibs
Gross Weight: 14.12kg/31.06Ibs
4190
4 ohms, 35Hz-20kHz (+/-3dB),
93dB ([email protected]),
Power Rating: 350W Continuous,
350W Music, 700W Peak,
Product Dimension (H x W x D):
(MM): 920 x 270 x 255
(inches): 36.22" x 10.62" x 10.03"
Carton Dimension (H x W x D):
(MM): 1020 x 360 x 360
(inches): 40.15" x 14.17" x 14.17"
Net Weight: 18.50kg/40.70Ibs
Gross Weight: 20.00kg/44.00Ibs
3190
4 ohms, 40Hz-20kHz (+/-3dB), 93dB ([email protected]),
Power Rating: 175W Continuous, 350W Music, 700W Peak,
Product Dimension (H x W x D):
(MM): 270 x 445 x 315
(inches): 10.63" x 17.52" x 12.40"
Carton Dimension (H x W x D):
(MM): 340 x 512 x 378
(inches): 13.38" x 20.15" x 14.88"
Net Weight: 15.60kg/34.32Ibs
Gross Weight: 16.48kg/36.25Ibs
5090
5190
4 ohms, 40Hz-15kHz (+/-3dB), 91dB ([email protected]),
Power Rating: 350W Continuous, 350W Music, 700W Peak,
Product Dimension (H x W x D):
(MM): 576 x 368 x 295
(inches): 22.68" x 14.49" x 11.61"
Carton Dimension (H x W x D):
(MM): 684 x 438 x 416
(inches): 26.92" x 17.24" x 16.37"
Net Weight: 17.60kg/38.72Ibs
Gross Weight: 21.14kg/46.50Ibs
4 ohms, 35Hz-15kHz (+/-3dB), 92dB ([email protected]),
Power Rating: 500W Continuous, 500W Music, 1000W Peak,
Product Dimension (H x W x D):
(MM): 590 x 353 x 310
(inches): 23.23" x 13.90" x 12.20"
Carton Dimension (H x W x D):
(MM): 648 x 438 x 416
(inches): 25.51" x 17.24" x 16.37"
Net Weight: 22.60kg/49.72Ibs
Gross Weight: 25.66kg/56.45Ibs
30
WLA 12
Installation Loudspeakers
A Wharfedale Pro 400w Is Louder Than Competitors 1000w Line Array Products.
Why? The Wharfedale Pro WLA-12 is fully horn-loaded, it has three horn loaded compression drivers and a horn loaded
woofer.
The Wharfedale Pro WLA-12 line array produces huge amounts of SPL, yet only requires modest amplification. The ultra
high sensitivity design means that you spend less on your amplification and get more level. All of the amplifier energy is
converted to pure SPL to give you the biggest output level possible for your budget.
A single WLA-12 element produces a massive 134dB peak SPL, considerably more than many competitors dual 12” line
array elements.
The WLA-12 isn't all about volume, it provides high-quality sound reinforcement and reproduction that is unheard of in this
class. The low distortion woofer and neodymium compression drivers are super accurate and are able to reproduce precise
transients with impressive detail. The vocal projection of WLA-12 is second to none. All transducers are coupled to well
designed horns that provide a perfect balance of projection and dispersion.
Another saving? The WLA-12 has a built-in passive crossover network and physically aligned transducers. The benefit to
you is again less amplification and no need for DSP or speaker management, the total system cost comes down again and
you get a loud, great sounding line array with a minimum of fuss. It just works.
The intuitive captive rigging hardware and tethered quick release pins ensure that the WLA-12 is simple to fly with a variety
of splay angles, giving you the widest range of configurations.
The WLA-12 is a complete line-array system, with a Fly-Frame and Dolly system available separately.
Key Features
• High Sensitivity, Full Horn Loaded Design
• 400W/800W/1600W Power Handling
• 12” Horn Loaded LF Driver
• 3” LF Voice Coil
• 3x 1” Exit HF Compression Drivers
• 1.8” Polyester HF Diaphragms
• Rare Earth Magnets
• Physically Aligned Transducers
• Internal Passive Crossover Network
31
•
•
•
•
•
•
•
•
External Crossover Bypass Switching
Front Hinged Rigging System
Captive Rigging Hardware with Tethered Quick Release Pins
Comprehensive Adjustable Splay Angles
Tethered Quick Release Pins (Each Rated To 2000Kg)
Rhino Rock™ Textured Composite Finish
Trapezoid Baltic Birch Plywood Enclosure
2x Parallel Speakon Inputs• Constant directivity waveguides
WLA 12
Installation Loudspeakers
Full Range
WLA12
12" LF, Full Rang, 8 ohms,
180-18kHz (+/-3dB), 106dB ([email protected]),
Power Rating: 400W Continuous,
800W Music, 1600W Peak,
Product Dimension (H x W x D):
(mm): 930 x 483/376 x 489
(inches): 36.61" x 19.01"/14.80 x 19.25"
Carton Dimension (H x W x D):
(mm): 1025 x 585/530 x 580
(inches): 40.35" x 23.03/20.86" x 22.83"
Net Weight: 61.00kg/134.20lbs
Gross Weight: 73.00kg/160.60lbs
Fly Frame
Product Dimension (H x W x D):
(mm): 934 x 800 x 280
(inches): 36.77" x 31.49" x 11.02"
Carton Dimension (H x W x D):
(mm): 955 x 307 x 827
(inches): 37.59" x 12.08" x 32.55"
Net Weight: 63.00kg/138.60lbs
Gross Weight: 69.00kg/151.80lbs
Dolly
Product Dimension (H x W x D):
(mm): 971 x 390 x 179.6
(inches): 38.22" x 15.35" x 7.07"
Carton Dimension (H x W x D):
(mm): 995 x 190 x 417
(inches): 39.17" x 7.48" x 16.41"
Net Weight: 8.40kg/18.48lbs
Gross Weight: 11.80kg/25.96lbs
32
Installation Loudspeakers
The DivaTM Series are stylish and subtle surface mount installation loudspeakers built upon many years of research and
development.
The distinctive spheroid ported cabinets eliminate internal standing waves improving efficiency and low frequency output.
The DivaTM Series are available with a black or white enclosure that can be painted to match any decor, enhancing their
suitability for style conscious environments.
A proprietary mounting system makes installation effortless, once the mounting is attached to the wall the speaker is easily
attached by pushing it onto the brackets spring loaded latch. At this stage your hands are now free to make the wiring
connections and angle adjustments, 120°x90° of pan and tilt are available to ensure accurate positioning and perfect
coverage. A single hex nut is used to lock the mechanism, ensuring that your speaker stays in the correct position.
Based on a 2-way co-axial design the DivaTM Series use 6” or 8” custom Wharfedale Pro transducers with a 2” diaphragm,
1.2” exit titanium compression driver on a coaxially mounted waveguide. The DivaTM Series have a very wide frequency
response and are capable of impressive sound pressure levels.
A 70.7 / 100 volt line matching transformer ensures impedance matched connectivity with your high impedance amplifier or
external line transformer. The 70.7 power tap has 7.5W, 15W, 30W and 60W modes while the 100 volt power tap has 15W,
30W and 60W modes. A low impedance (8Ω) setting allows connectivity to a low impedance amplifier.
Key Features
•
•
•
•
•
•
2-way co-axial loudspeakers
2” titanium compression driver
6” or 8” low distortion high power woofers
Spheroid ported enclosures
Durable high strength polypropylene construction
Infinitely adjustable mounting bracket
•
•
•
•
•
Quick and simple to install
Phoenix input connector
Front panel adjustable 70.7/100 volt transformer
Integral cable management
Suitable for horizontal or vertical placement
Diva 55
2-way co-axial loudspeaker,
8 ohms Impedance, 75Hz-20kHz
Frequency Response (+/-3dB), 85dB([email protected])
Transformer Power taps:
70 volt - 7.5W, 15W, 30W, 60W,
100 volt - 15W, 30W, 60W
Product Dimension (H x W x D):
(MM): 390 x 221 x 246
(inches): 15.35" x 8.70" x 9.69"
Carton Dimension (H x W x D):
(MM): 472 x 282 x 382
(inches): 18.58" x 11.10" x 15.04"
Speaker Weight: 6.38kg/14.1lbs
Bracket Weight: 0.8kg/1.76lbs
33
Installation Loudspeakers
Full Range
Diva 8
Diva 8S
2-way Co-axial, 8 ohms,
60Hz-20kHz(+/-3dB), 90dB ([email protected]),
Transformer Power taps:
70 volt - 7.5W, 15W, 30W, 60W
100 volt - 15W, 30W, 60W
Product Dimension (H x W x D):
(MM): 484 x 275 x 305
(inches): 19.06" x 10.83" x 12.01"
Carton Dimension (H x W x D):
(MM): 620 x 475 x 345
(inches): 24.41" x 18.70" x 13.58"
Net Weight: 11.80 kg/25.96lbs
Gross Weight: 14.50kg/31.90lbs
2-way co-axial loudspeaker, 16 ohms
Impedance, 65Hz-20kHz Frequency
Response (+/-3dB), 90dB([email protected])
Power Handling: 100W/200W/400W
Product Dimension (H x W x D):
(MM): 484 x 275 x 305
(inches): 19.06" x 10.83" x 12.01"
Carton Dimension (H x W x D):
(MM): 620 x 475 x 345
(inches): 24.41" x 18.70" x 13.58"
Net Weight: 8.28kg/18.22lbs
Gross Weight: 11.80kg/25.96lbs
Diva 6
Diva 6S
2-Way Co-axial, 8 ohms,
60Hz-20kHz(+/-3dB), 90 dB([email protected]),
Transformer Power taps:
70 volt - 6.25W, 12.5W, 25W, 50W
100 volt - 12.5W, 25W, 50W
8 ohms - 70W
Product Dimension (H x W x D):
(MM): 390 x 246 x 221
(inches): 15.35" x 9.69" x 8.70"
Carton Dimension (H x W x D):
(MM): 480 x 385 x 285
(inches): 19.00" x 15.16" x 11.22"
Net Weight: 7.20kg/15.84Ibs
Gross Weight: 9.60kg/21.12Ibs
2-way co-axial loudspeaker, 16 ohms
Impedance, 105Hz-20kHz Frequency
Response (+/-3dB), 85 dB([email protected])
Power Handling: 60W/120W/240W
Product Dimension (H x W x D):
(MM): 390 x 246 x 221
(inches): 15.35" x 9.69" x 8.70"
Carton Dimension (H x W x D):
(MM): 480 x 385 x 285
(inches): 19.00" x 15.16" x 11.22"
Net Weight: 5.1kg/11.22lbs
Gross Weight: 8.50kg/18.70lbs
34
Accessories
Installation Loudspeakers
WPB-1 WPB-2 WPB-3 WPB-4 WPB-5
The WPB-1 is suitable for all Wharfedale pro loudspeakers that feature an omnimount
60.0 footprint on the base of the enclosure, including Si (X versions) and Titan 12/15
passive and active versions.
The WPB-2 is suitable for all Wharfedale pro loudspeakers that feature
a pole mount socket and are under 22Kg in weight.
The WPB-2 is suitable for all Wharfedale pro loudspeakers that feature a pole mount
socket and are under 22Kg in weight.
The WPB-4 is suitable for all Wharfedale pro loudspeakers that
feature an OmnimountTM 30.0 footprint on the rear of the enclosure,
or Programme 105, 105T, 108, 108T, 205, 205T, 206, 206T.
The WPB-5 is attached to an appropriate mounting surface using any suitable
combination of the 10 mounting points that are provided. Your loudspeaker is then
attached to the bracket using 4 threaded inserts. A WPB-5 provides secure and versatile
mounting with control over both pan and tilt, 0º to 40º of downward tilt are available.
SP-1 SP-2
SP-1 35mm/900mm pole for any pole mount
SP-2 35mm/900mm pole with thread
WPB-1
WPB-2
WPB-3
WPB-4
WPB-5
35
Titan 8
x
x
-
Titan 12
x
x
-
Titan 15
x
x
-
Programme
x
x
SI-X
x
x
EVP-X
x
-
EVP-R
x
-
Vector
x
-
Kinetic
x
-
36
ELECTRONICS
SR 806
SL Mixers
Connect Mini Mixers
PMX Power Mixers
PMX Systems
Force
S Amplifiers
MP Amplifiers
DW Amplifiers
WX Amplifiers
XO Crossovers
LMX-204 Crossovers
WPL-26 Speaker Switching System
WPR-26MKII Speaker Switching System
Q Equalisers
39
40
41
43
44
45
46
47
48
49
51
52
53
54
55
SR 806
Mid-Format Mixer
Electronics
The Wharfedale Pro SR806 is a studio/live mixing console with a versatile feature set that suits it to a broad spectrum of
applications.
The internally impedance balanced circuitry ensures that crosstalk and interference are kept to a minimum, in conjunction
with the studio grade mic preamps the SR806 helps you produce dynamic, quiet and natural mixes with very low distortion.
5 auxiliary sends can be used to feed monitor mixes, the internal FX units or a subwoofer. The dedicated subwoofer send
has a switchable 80/120Hz LPF and facilitates clean low end content, you can direct the kick and bass to the subs while
avoiding boomy vocals and acoustic guitar.
The 2 built in 192kHz 24 bit FX processors each have a choice of 56 effects to add a creative edge to your mix without the
need for extra equipment and expense.
Comprehensive metering with PFL/AFL on all channels/sends allows you to observe correct gain structure with ease. A
break button cuts out all of the mic inputs and routes the tape input to the master section should you encounter any nasty
situations.
Key Features
• Internally impedance balanced circuitry
• 8 mono channels
-XLR / ¼” TRS inputs with HPF
-Studio grade microphone preamps
-25dB pad
-3 band parametric EQ
-48v phantom power
• 4 stereo channels
-¼” TRS inputs
-4 band EQ
• 2x 192kHz/24 bit FX processors
• 4 stage metering per channel
• 12 stage master metering
• PFL on all channels
• AFL on all sends
• 5 auxiliary sends
-2 monitor mixes
-1 subwoofer output with LPF
-2 FX sends
• 4 sub groups with direct outs
• Stereo RCA line level input
• Break button
• XLR and ¼” TRS main outputs
SR 806
Max input level: Mic In: +10dBu Line In: +20dBu
Max output level: +22dBu ±1dBu
Headphone: Over 150mW @ 32 ohms
Frequency Response: 20Hz-20kHz (+/-1dB)
Input Channel EQ (shelving):
High (+/- 15dB) 12kHz
Mid (+/- 15dB) 300Hz-6KHz
Low (+/-15dB) 80Hz
Product Dimension (H x W x D):
(MM): 534 x 477 x 119
(inches): 21.02'' x 18.78'' x 4.69''
Carton Dimension (H x W x D):
(MM): 670 x 581 x 213
(inches): 26.38'' x 22.87'' x 8.39''
Net Weight: 11.50kg/25.30Ibs
Gross Weight: 13.50kg/29.70Ibs
3
SL
SL Series
Mixers
Electronics
SL Series mixers are studio/live mixing consoles with built-in full duplex USB interfacing.
Designed to cater for a wide range of mid format mixing duties, the SL Series includes many features suited to both live
sound and home studio applications.
A high quality class-compliant 2-input 2-output 16-bit/48kHz USB interface features a flexible record bus and dedicated
return channel that is great for live and home recording.
Studio grade microphone preamps are used throughout the range and have balanced XLR inputs, with all channels also
offering balanced/unbalanced TRS line level connectivity. In addition all of the mono channels have a TRS insert point.
An ultra musical 3-band EQ is available on all channels, with an additional high pass filter on the mono channels. A built in FX
processor with 16 presets gives you unlimited creative potential and is supplemented by a dedicated FX send and 2 auxiliaries.
Key Features
• Full duplex 2in/2out 16-bit 48kHz USB interface
• Studio grade phantom powered microphone pre-amps
• Ultra musical 3 band EQ with high pass filters
• Pan and Balance controls
• Control room and headphone outputs
• Master outputs with XLR and TRS connectors
SL 424 USB
Maximum Balanced Output Level
(1%T.H.D. at 1KHz ):
Main XLR Balanced Out +26.5dBu ±1dBu
Main ¼" Jack Balanced Out +26.5dBu ±1dBu
Maximum Unbalanced Output Level
(1%T.H.D. at 1KHz ):
Main XLR Unbalanced Out +21dBu ±1dBu
Main ¼" Jack Unbalanced Out +21dBu ±1dBu
Headphone Output 150mW ±5mW @ 32 ohms
Frequency Response: 20Hz~20kHz ±2dB
Product Dimension (H x W x D):
(MM): 248 x 265 x 92.5
(inches): 9.76" x 10.43" x 3.64"
Carton Dimension (H x W x D):
(MM): 365 x 136 x 343
(inches): 14.37" x 5.35" x 13.50"
Net Weight: 2.70 kg/5.94Ibs
Gross Weight: 4.26 kg/9.37Ibs
SL 824 USB
SL 1224 USB
Maximum Balanced Output Level
(1%T.H.D. at 1kHz):
Main XLR Balanced Out +26.5dBu ±1dBu
Main 1/4" Jack Balanced Out +26.5dBu ±1dBu
Maximum Unbalanced Output Level
(1%T.H.D. at 1kHz):
Main XLR Unbalanced Out +21dBu ±1dBu
Main 1/4" Jack Unbalanced Out +21dBu ±1dBu
Headphone Output 150mW ±5mW @ 32 ohms
Frequency Response: 20Hz~20kHz ±2dB
Product Dimension (W x D x H):
(MM): 80 x 400 x 369
(inches): 3.15" x 15.75" x 14.53"
Carton Dimension (W x D x H):
(MM): 510 x 480 x 190
(inches): 20.08" x 18.90" x 7.48"
Net Weight: 5.20kg/11.44lbs
Gross Weight: 6.20kg/13.64lbs
Maximum Balanced Output Level
(1%T.H.D. at 1kHz):
Main XLR Balanced Out +26.5dBu +/-1dBu
Main 1/4" Jack Balanced Out +26.5dBu +/-1dBu
Maximum Unbalanced Output Level
(1%T.H.D. at 1kHz):
Main XLR Unbalanced Out +21dBu +/-1dBu
Main 1/4" Jack Unbalanced Out +21dBu +/-1dBu
Headphone Output 150mW +/-5mW @ 32 ohms
Frequency Response: 20Hz~20kHz +/-2dB
Product Dimension (W x D x H):
(MM): 80 x 400 x 475
(inches): 3.15" x 15.75" x 18.70"
Carton Dimension (W x D x H):
(MM): 510 x 586 x 190
(inches): 20.08" x 23.07" x 7.48"
Net Weight: 6.85kg/15.07lbs
Gross Weight: 8.05kg/17.71lbs
40
Connect Series
Compact Mixers
Electronics
The Connect Series from Wharfedale Pro are high quality micro-mixers that are suitable for a wide range of applications.
Professional big mixer features such as Phantom powered, balanced XLR microphone inputs give you full functionality and
great sound in an ultra compact and cost effective package that is ideal for live sound, home studio recording and fixed
installations. The Microphone pre-amplifiers use the same high quality components and construction methods that are
employed in the recently released SL Series Mixers.
All Connect Series models feature an intuitive, ergonomically designed user interface that is excellent for beginners and
professionals alike. Comprehensive connectivity ensures that a Connect mixer will fit into any situation you need.
Key Features
• Switchable global +48V phantom power
• Clip LED's on mic/line channels
• Balanced XLR Mic Inputs
• Pan/Balance Controls On All Channels
41
• Stereo channels with balanced/unbalanced ¼" TRS jacks
• Separate Main Mix and Phones outputs with level controls
• Stereo 4 segment LED meters
• Stereo ⅛” and ¼" headphone outputs
Connect 502
Connect 502 USB
Maximum Output Level: +22dBu
Maximum Headphone Output Level:
>150mW @ 32 ohms
THD: <0.0025% @ +14dBu
Frequency Response: 20Hz - 20kHz ±1dB
Maximum Input Levels: Mic In: +10dBu,
Line In: +20dBu, 2TK IN: +20dBu
Product Dimension (H x W x D):
(MM): 50.9 x 143 x 183.8
(inches): 2.00" x 5.63" x 7.24"
Carton Dimension (H x W x D):
(MM): 253 x 77 x 226
(inches): 9.96" x 3.03" x 8.90"
Net Weight: 0.66kg/1.45lbs
Gross Weight: 1.64kg/3.60lbs
Maximum Output Level: +22dBu
Maximum Headphone Output Level:
>150mW @ 32 ohms
THD: <0.0025% @ +14dBu Frequency
Response: 20Hz - 20kHz ±1dB
Maximum Input Levels: Mic In: +10dBu,
Line In: +20dBu, USB in: +10dBu
Product Dimension (H x W x D):
(MM): 50.9 x 143 x 183.8
(inches): 2.00" x 5.63" x 7.24"
Carton Dimension (H x W x D):
(MM): 253 x 77 x 226
(inches): 9.96" x 3.03" x 8.90"
Net Weight: 0.64kg/1.40Ibs
Gross Weight: 1.62kg/3.56Ibs
CONNECT
Electronics
Connect 802
Connect 802 USB
Maximum Output Level: +22dBu
Maximum Headphone Output Level:
>150mW @ 32 ohms
THD: <0.0025% @ +14dBu
Frequency Response: 20Hz-20kHz ±1dB
Maximum Input Levels:
Mic In: +10dBu, Line In: +20dBu,
2TK IN: +20dBu
Product Dimension (H x W x D):
(MM): 50.9 x 208 x 183.8
(inches): 2.00" x 8.19" x 7.24"
Carton Dimension (H x W x D):
(MM): 311 x 77 x 226
(inches): 12.24" x 3.03" x 8.90"
Net Weight: 0.95kg/2.09lbs
Gross Weight: 1.93kg/4.24lbs
Maximum Output Level: +22dBu
Maximum Headphone Output Level:
>150mW @ 32 ohms
THD: <0.0025% @ +14dBu Frequency
Response: 20Hz-20kHz ±1dB
Maximum Input Levels:
Mic In: +10dBu, Line In: +20dBu,
USB in: +10dBu
Product Dimension (H x W x D):
(MM): 50.9 x 208 x 183.8
(inches): 2.00" x 8.19" x 7.24"
Carton Dimension (H x W x D):
(MM): 311 x 77 x 226
(inches): 12.24" x 3.03" x 8.90"
Net Weight: 0.92kg/2.02Ibs
Gross Weight: 1.90kg/4.18Ibs
Connect 1202FX
Connect 1002FX
Maximum Balanced Output Level: +26dBu ±1dBu
Maximum Unbalanced Output Level: +21dBu ±1dBu
Headphone output 150mW ±5mW @ 32 ohms
THD+N: <0.025% @ + 14dBu ±0.5dBu
Frequency Response:20Hz~20kHz ±1dB
Maximum Input Level: Mic +4dBu ±1dBu
Channel Line +25dBu ±1dBu
Stereo Line +25dBu ±1dBu
2TK IN +25dBu ±1dBu
Dimensions (H x W x D):
(MM): 360.1 x 183.8 x 52.8
(Inch): 14.2" x 7.3" x 2.1"
Weight: 1.69kg /3.73lbs
Maximum Balanced Output Level: +26dBu ±1dBu
Maximum Unbalanced Output Level: +21dBu ±1dBu
Headphone output 150mW ±5mW @ 32 ohms
THD+N: <0.019% @ + 14dBu ±0.5dBu
Frequency Response: 20Hz~20kHz ±1dB
Maximum Input Level: Mic +4dBu ±1dBu
Channel Line +25dBu ±1dBu
Stereo Line +25dBu ±1dBu
2TK IN +25dBu ±1dBu
Dimensions (H x W x D):
(MM): 293.9 x 183.8 x 52.8
(Inch): 11.6" x 7.3" x 2.1"
Weight: 1.37kg/3.02lbs
42
PMX Series
Powered Mixers
Electronics
The PMX Series from Wharfedale Pro are lightweight, compact and portable powered mixers.
Designed to be a perfect balance of portability and power the PMX Series are suitable for use in a wide range of portable
sound applications. Everything you need to mix and amplify microphones and line level sources is included in one box, with
an ergonomic carry handle to aid transportation. The one box concept speeds up your setup time and allows you to start
your performance quicker than ever before.
All models feature built in digital FX processing, expanding your creativity and improving your sound quality without the
need for additional expensive and often cumbersome processors. A graphic EQ allows fine tuning of the overall mix; the
PMX 700 and PMX 710 have a flexible routing system that allows you to EQ your front of house and monitor speakers in
mono or your front of house in stereo.
Phantom powered XLR microphone inputs allow you to connect any type of microphone, line level inputs are available
with both ¼” jacks and RCA connectors. The PMX710 includes a full-duplex USB playback and record interface and pan/
balance controls. The main outputs use Speakon™/¼” jack Combi connections for maximum reliability and versatility.
Key Features
• Lightweight Class-D Amplifier Modules
• Lightweight, High-Efficiency Switch-Mode Power Supplies
• Phantom Powered Balanced XLR Mic Inputs
• ¼” Jack and RCA Line Level Inputs
• Peak Indicator for Each Channel
• Built-in Digital FX
• Graphic EQ on Master Section
• 4 Segment LED Metering
• ¼” Jack/Speakon™ Main Outputs
PMX 500
PMX 700
Power Output: 150W into 4 ohms RMS,
AC 100-120V~/220-240V, 50/60Hz,
Frequency Response: 45Hz-20kHz +1/-2dB
Input Channel EQ (MONO):
High (+/-15dB) 12kHz
Low (+/-15dB) 100kHz
Product Dimension (H x W x D):
(MM): 392 x 261 x 243
(inches): 15.43" x 10.27" x 9.56"
Carton Dimension (H x W x D):
(MM): 440 x 295 x 329
(inches): 17.32" x 11.61" x 12.95"
Net Weight: 4.65kg/10.23Ibs
Power Output: 2 x 150W into 4 ohms RMS,
AC 100-120V~/220-240V, 50/60Hz,
Frequency Response: 20Hz-20kHz +1/-2dB
Input Channel EQ (MONO):
High (+/-15dB) 12kHz
Mid (+/-15dB) 2kHz
Low (+/-15dB) 100kHz
Product Dimension (H x W x D):
(MM): 392 x 261 x 243
(inches): 15.43" x 10.27" x 9.56"
Carton Dimension (H x W x D):
(MM): 440 x 295 x 329
(inches): 17.32" x 11.61" x 12.95"
Net Weight: 5.45kg/11.99Ibs
PMX 710
43
Power Output: 2 x 250W into 4 ohms RMS,
AC 100-120V~/220-240V, 50/60Hz,
Frequency Response: 40Hz-20kHz +1/-2dB
Input Channel EQ (MONO):
High (+/-15dB) 12kHz
Mid (+/-15dB) 2kHz
Low (+/-15dB) 100Hz
Product Dimension (H x W x D):
(MM): 392 x 261 x 243
(inches): 15.43" x 10.27" x 9.56"
Carton Dimension (H x W x D):
(MM): 440 x 295 x 329
(inches): 17.32" x 11.61" x 12.95"
Net Weight: 5.70kg/12.54Ibs
Gross Weight: 6.90kg/15.18Ibs
PMX
PMX System
Electronics
The Wharfedale Pro PMX System provides you with everything you need to get up and running for a public performance. A
PMX System is a cost effective, high quality solution that is ultra portable and suitable for both beginners and professionals
alike. Systems are available that are based around the PMX500 and PMX700 powered mixers.
A PMX System package comprises of a PMX powered mixer, a pair of 2-way loudspeakers (PTX-8 with the PMX 500 System
and PTX-12 with the PMX700 System), a DM1.0 dynamic microphone and all the necessary cables to connect the system.
Setting up a PMX System has been designed to be simple even for absolute beginners, a basic vocal PA can be created in
a matter of minutes even if you have no professional audio experience. Adding more equipment is simple and ensures that
a PMX System can grow with your needs.
Key Features
• 1x PMX powered mixer
• 2x PT-X 2-way loudspeakers
• 1x DM 1.0 dynamic microphone
• 1x 4.5m microphone cable
• 2x speaker cables
PMX 500 System
PMX 700 System
Power Mixer: PMX 500 System
Output: 150W @ 4Ω
Passive Loudspeakers: (Model: PT-X8
Quantity: 2 NominalCoverage: 900 x 600)
Power Handling: 75W / 150W / 300W
Nominal Impedance: 8Ω
LF Driver size: 205mm / 8"
HF Material: Phenolic
AC 100-120V~/220-240V~, 50/60Hz
Product Dimension (H x W x D):
(MM): 429 x 280.7/146.7 x 250
(inches): 16.9 x 11.1/5.8 x 9.8
Microphone: (Model: DM 1.0 Type: Dynamic
Magnet material: Neodymium Polar pattern: Cardiod
Connector: 3-pin gold plated balanced male XLR)
Carton Dimension (H x W x D):
(MM): 584 x 305 x 795
(inches): 22.99" x 12.00" x 31.29"
Net Weight: 21.50kg/47.30Ibs
Gross Weight: 25.00kg/55.00Ibs
Power Mixer: PMX 700 System
Output: 150W @ 4Ω x 2
Passive Loudspeakers: (Model: PT-X12
Quantity: 2 Nominal Coverage: 900 x 600)
Power Handling: 250W / 500W / 1000W
Nominal Impedance: 4Ω
LF Driver size: 305mm / 12"
HF Material: Phenolic
AC 100-120V~/220-240V~, 50/60Hz
Product Dimension (H x W x D):
(MM): 525 x 370.7/207.3 x 305
(inches): 20.7 x 14.6/8.2 x 12
Microphone: (Model: DM 1.0 Type: Dynamic
Magnet material: Neodymium Polar pattern: Cardiod
Connector: 3-pin gold plated balanced male XLR)
Carton Dimension (H x W x D):
(MM): 779 x 355 x 907
(inches): 30.66" x 13.97" x 35.70"
Net Weight: 33.50kg/73.70Ibs
Gross Weight: 39.50kg/86.90Ibs
44
Force
Electronics
Designed to be a perfect balance of portability and power the FORCE 12 is suitable for use in a wide range of portable
sound applications. Everything you need to mix and amplify microphones and line level sources is included in one box,with
an ergonomic carry handle to aid transportation.
The FORCE 12 features built-in digital FX processing, removing the need for additional expensive and often cumbersome
processors. The included graphic EQ can be used to tame feedback issues and allows fine tuning of the overall mix. A
mode switch allows the onboard amplification to be used to power either stereo front of house loudspeakers or a mono front
of house and mono foldback monitor system. Class compliant USB connectivity is included for quick and simple connection
to a laptop computer for playback or recording.
Key Features
• 500W x [email protected] (RMS), 300W x [email protected] (RMS),
1300W x [email protected] (Peak)
• 12 channels (8 mono & 2 stereo, play & record)
• 10 Line inputs (6 Line, 2 Hi-z, 2 stereo)
• 8 Mic inputs with switchable global + 48V phantom power
• Optional RCA & USB connections for 1 stereo channel
• Parallel RCA & Line connections for 1 stereo channel
• 3-band EQ control for each mono channel
• 2-band EQ control for each stereo channel
• Dual 7-band Graphic EQs with routing switch
• 10 channel peak LED indicators and 1 Effects peak LED
indicator
• Dual 7-band Master Level LED indicators and 2 Limit LED
indicators
• Mute button for all the Mic channels
• FX bypass button and FX Foot Switch to mute FX function
• 56 sorts of stereo effects with LED digital display
• Insert balanced/unbalanced 1/4” TRS jacks for the built-in
stereo amplifiers
• 5 low level outputs (Main L/R, Mon Send, FX Send, and
Sub Out-80Hz LPF with 1/4” TRS jacks,and Record Output
with RCA jacks)
• Thermal protect, over current protect, DC protect, and
output short protect
• Speakon outputs for speakers
Force 12
Power Output: 500W x 2 RMS into 4 ohms (THD=1%@ 1KHz)
550W x 2 RMS into 4 ohms (THD=5%@ 1KHz)
260W x 2 RMS into 8 ohms (THD=1%@ 1KHz)
290W x 2 RMS into 8 ohms (THD=5%@ 1KHz)
1300W x 2 Peak into 4 ohms
700W x 2 Peak into 8 ohms
AC 100-120V~50/60Hz or AC220-240V~50/60Hz
Frequency Response: 20Hz -40kHz +1dB/-3dB
(Mic/Line mono, Line stereo)
Input channel equalizations: High 12kHz shelving
Mid 2kHz shelving
Low 100Hz shelving
Maximum: +/-15dB
Product Dimension (H x W x D):
(MM): 540 x 330 x 330 (Inch): 22" x 13" x 13"
Net weight: 11Kg/24lbs
Carton Dimension (H x W x D):
(MM): 604 x 401 x 403 (Inch): 23.78" x 15.79" x 15.87"
Gross Weight: 13.5kg/29.7lbs
45
S
S Series
Amplifiers
Electronics
The S Series from Wharfedale Pro are high output power amplifiers designed to cater for a wide range of applications.
Each model is packed into a convenient, 2U rackmount chassis with identical functional layout. Each model offers a different power
rating with a variety of input and output options.
Various mode assignments are provided on the rear panel with easy-to-use mode switches that provide assignment options such
as signal limiting, low cut filter engagement and frequency selection, stereo and mono input mode selection and output bridging.
The S-Series amps are fan-cooled with a cage-protected, rear panel mounted fan that provides adequate air-flow to internal
components. An integral AC power circuit breaker is provided on the rear panel and a standard IEC power connector is provided.
Key Features
• Front panel LED indicators for Power, Protect, Bridge, Peak and signal
• Global power switch and input trim controls for each of the two channels
• Rear panel "mode switches" for signal limiting, low cut filter
engagement/frequency, stereo/mono input mode selection and output bridging
• Industry standard XLR and balanced 1/4" TRS input jacks with 4 pin NL-4 style SpeakonTM outputs and
binding post output connectors
• Multiple output wiring configurations
• Fan-cooled with a cage-protected, rear panel mounted fan to provide adequate air-flow to internal components
• Integral AC power circuit breaker and standard IEC power connector on the rear panel
S-1000
Stereo mode:
215 Watts per channel into 8 ohms(0.1% THD @ 1kHz)
350 Watts per channel into 4 ohms(0.1% THD @ 1kHz)
462 Watts per channel into 2 ohms(0.1% THD @ 1kHz)
Bridged mode: 630 Watts into 8 ohms(0.1% THD @ 1kHz)
910 Watts into 4 ohms(0.1%THD @ 1kHz)
AC 100V/120V/220V/240V, 50/60Hz
Frequency Response: 20Hz-20kHz 0/-0.5dB
Product Dimension(H x W x D):
(MM): 96 x 482.6 x 427 (inches): 3.80" x 19.00" x 16.80"
Carton Dimension (H x W x D):
(MM): 175 x 565 x 502 (inches): 6.89" x 22.24" x 19.76"
Net Weight: 15.40kg/33.88lbs
Gross Weight: 17.88kg/39.33Ibs
S-1500
Stereo mode:
300 Watts per channel into 8 ohms (0.1% THD @ 1kHz)
480 Watts per channel into 4 ohms (0.1% THD @ 1kHz)
650 Watts per channel into 2 ohms (0.1% THD @ 1kHz)
Bridged mode: 910 Watts into 8 ohms (0.1% THD @ 1kHz)
1200 Watts into 4 ohms (0.1% THD @ 1kHz)
AC 100V/120V/220V/240V, 50/60Hz
Product Dimension (H x W x D):
(MM): 96 x 482.6 x 427 (inches): 3.80" x 19.00" x 16.80"
Carton Dimension (H x W x D):
(MM): 175 x 565 x 502 (inches): 6.89" x 22.24" x 19.76"
Net Weight: 16.30kg/35.86lbs
Gross Weight: 18.78kg/41.31Ibs
S-2500
Stereo mode:
490 Watts per channel into 8 ohms (0.1% THD @ 1kHz)
760 Watts per channel into 4 ohms (0.1% THD @ 1kHz)
1050 Watts per channel into 2 ohms (0.1% THD @ 1kHz)
Bridged mode: 1400 Watts into 8 ohms (0.1% THD @ 1kHz)
2200 Watts into 4 ohms (0.1% THD @ 1kHz)
AC 100V/120V/220V/240V, 50/60Hz
Product Dimension (H x W x D):
(MM): 96 x 482.6 x 427 (inches): 3.80" x 19.00" x 16.80"
Carton Dimension (H x W x D):
(MM): 175 x 565 x 502 (inches): 6.89" x 22.24" x 19.76"
Net Weight: 17.70kg/38.94lbs
46
Gross Weight: 20.16kg/44.35Ibs
MP Series
Amplifiers
Electronics
The MP Series amplifiers are heavy duty, high power output power amplifiers suitable for touring and installation
applications. Oversize toroidal transformers ensure reliable high power delivery, with a linear power supply for stable
operation in the most demanding situations.
Two models are available in the range, featuring Class A/B topology for the MP1800 and Class H for the MP2800. The
MP Series was engineered to provide massive output and boasts an impressive list of safety features to protect your
investment. A continuously variable fan keeps the unit cool at all times. Both models come in a durable all steel 3U
rackmount chassis. Dual mono and bridged mode operation is selectable via back panel switching.
Key Features
• Sophisticated Protection Circuitry
• Front Panel Input Trim Controls
• Balanced/Unbalanced ¼" TRS and XLR Inputs
• Speakon Ouputs
MP1800
Stereo 600W @ 4 ohms, 900W @ 2 ohms
Up to 1,800W @ 4 ohms Bridged
High-precision Class AB topology
Balanced XLR and 1/4" TRS Inputs
Short Circuit, Open Circuit and Thermal protection
5-way Binding Post and NL4 output connectors
3U rack mount enclosure
AC 100-120V~/220-240V~, 50/60Hz
Product Dimension (W x D x H):
(MM): 133 x 483 x 355 (inches): 5.20" x 19.00" x 13.90"
Carton Dimension (W x D x H):
(MM): 250 x 570 x 480 (inches): 9.84" x 22.44" x 18.90"
Net Weight: 23.50kg/51.70lbs
Gross Weight: 25.00kg/55.00Ibs
MP2800
Stereo 950W @ 4 ohms, 1450W @ 2 ohms
Up to 2,700W @ 4 ohms Bridged
High-precision Class H topology
Balanced XLR and 1/4" TRS Inputs
Short Circuit, Open Circuit and Thermal protection
5-way Binding Post and NL4 output connectors
3U rack mount enclosure
AC 100-120V~/220-240V~, 50/60Hz
Product Dimension (W x D x H):
(MM): 133 x 483 x 355 (inches): 5.20" x 19.00" x 13.90"
Carton Dimension (W x D x H):
(MM): 250 x 570 x 480 (inches): 9.84" x 22.44" x 18.90"
Net Weight: 28.00kg/61.60lbs
Gross Weight: 29.50kg/64.90Ibs
4
Amplifiers
DW
DW Series
Electronics
The DW Series from Wharfedale Pro are rackmount power amplifiers suitable for both touring and fixed installation
applications. The rugged class H topology and toroidal transformers are tolerant to unfavourable power conditions, and
ensure stable operation in even the most demanding conditions.
Three models are available with different power outputs, each using the same 2U chassis with front panel mounted filtered
air intakes. LED status indicators make you aware of AC supply, protection circuitry activity, bridge mode and peaks on
channel A or B.
XLR inputs with through outputs allow parallel wiring of multiple amplifiers for use in larger applications. The main outputs
use Speakon™ connectors for durable and reliable connectivity. Bridge mode and ground lift switches are located on the
rear to minimize the risk of accidental activation.
Key Features
• Switchable stereo and bridged modes
• Individual channel input trim controls
• XLR inputs with through outputs
• Speakon™ main outputs
• Power, Protect, Bridge and Peak LED indicators
• Fan cooled with front panel mounted filters
• IEC mains input receptacle
• 2U rackmount chassis
DW 800
Stereo mode: 2 x 230 Watts per channel into 8 ohms (0.1% THD @ 1kHz)
2 x 330 Watts per channel into 4 ohms (0.1% THD @ 1kHz)
2 x 340 Watts per channel into 2 ohms (0.1% THD @ 1kHz)
Bridged mode: 650 Watts into 8 ohms (0.1% THD @ 1kHz)
800 Watts into 4 ohms (0.1% THD @ 1kHz)
AC 100-120V~/220-240V~, 50/60Hz
Frequency Response: 20Hz-20kHz (0~2dB)
Product Dimension (W x D x H):
(MM): 483 x 380 x 88 (inches): 19.02" x 14.96" x 3.46"
Carton Dimension (W x D x H):
(MM): 570 x 555 x 145 (inches): 22.44" x 21.85" x 5.71"
Net Weight: 17.50kg/38.50Ibs
Gross Weight: 19.00kg/41.80Ibs
DW 1600
Stereo mode: 2 x 450 Watts per channel into 8 ohms (0.1% THD @ 1kHz)
2 x 620 Watts per channel into 4 ohms (0.1% THD @ 1kHz)
2 x 800 Watts per channel into 2 ohms (0.1% THD @ 1kHz)
Bridged mode: 1250 Watts into 8 ohms (0.1% THD @ 1kHz)
1600 Watts into 4 ohms (0.1% THD @ 1kHz)
AC 100-120V~/220-240V~, 50/60Hz
Frequency Response: 20Hz-20kHz (0~2dB)
Product Dimension (W x D x H):
(MM): 483 x 380 x 88 (inches): 19.02" x 14.96" x 3.46"
Carton Dimension (W x D x H):
(MM): 570 x 555 x 145 (inches): 22.44" x 21.85" x 5.71"
Net Weight: 19.50kg/42.90Ibs
Gross Weight: 21.00kg/46.20Ibs
DW 2400
Stereo mode: 2 x 590 Watts per channel into 8 ohms (0.1% THD @ 1kHz)
2 x 910 Watts per channel into 4 ohms (0.1% THD @ 1kHz)
2 x 1200 Watts per channel into 2 ohms (0.1% THD @ 1kHz)
Bridged mode: 1800 Watts into 8 ohms (0.1% THD @ 1kHz)
2400 Watts into 4 ohms (0.1% THD @ 1kHz)
AC 100-120V~/220-240V~, 50/60Hz
Frequency Response: 20Hz-20kHz (0~2dB)
Product Dimension (W x D x H):
(MM): 483 x 380 x 88 (inches): 19.02" x 14.96" x 3.46"
Carton Dimension (W x D x H):
(MM): 570 x 555 x 145 (inches): 22.44" x 21.85" x 5.71"
Net Weight: 21.50kg/47.30Ibs
Gross Weight: 23.00kg/50.60Ibs
48
WX Series
Amplifiers
Electronics
The WX Series features that deliver between 300W and 500W per channel into a 4 ohm load in a rugged 2U, 19" rack
mount enclosure. An advanced SMPS (Switched Mode Power Supply) and Class AB topology deliver high power with low
distortion in a compact and lightweight form factor.
A full suite of protection includes thermal, over and under voltage, over-current, DC, short circuit protect and power on/off
mute. The WX Series features XLR inputs and link outputs with a maximum input level of +22dBu allowing integration with
any typical professional audio system. A variable speed fan keeps the amplifier rack quiet when not in use. The WX series
features a built in switched 100Hz LPF/HPF on each channel, allowing the amplifier to drive a bi-amplified system without
any external processing.
Key Features
• SMPS - Lightweight and Efficient
• Class AB Topology amplifier modules - For Great Sound
Quality and Reliability
• Internal LPF/HPF/Fullrange Filtering
• Speakon Outputs
• Internal Circuit Breaker With Reset Switch
• Ultra Quiet Variable Speed Fan
• XLR Inputs and Parallel Wired Thru Outputs
• Front Panel Input Trim Controls
• Signal, Peak, Power and Protect LED Indicators
• Road Ready 2U Chassis
• IEC Mains Input Receptacle
49
WX
Electronics
Full Range
WX-1
WX-3
Stereo Power Output: 180 Watts, 8 ohms x 2
300 Watts, 4 ohms x 2
260 Watts, 2 ohms x 2
650 Watts (Peak @ 1kHz, single) 4 ohms
AC 100-120V~50/60Hz or AC220-240V~50/60Hz
Frequency Response: 20Hz-20kHz +/-1dB @ 4 Ohms
5Hz-50kHz +/-3dB @ 4 Ohms
Product Dimension (H x W x D):
(MM): 481.6 x 286 x 88
(inches): 19.00" x 11.30" x 3.50"
Carton Dimension (H x W x D):
(MM): 579 x 409 x 180
(inches): 22.79" x16.10" x 7.09"
Net Weight: 8.2kg/18.04lbs
Gross Weight: 9.5kg/20.9lbs
Stereo Power Output: 260 Watts, 8 ohms x 2
500 Watts, 4 ohms x 2
330 Watts, 2 ohms x 2
1050 Watts (Peak @ 1kHz, single) 4 ohms
AC 100-120V~50/60Hz or AC220-240V~50/60Hz
Frequency Response: 20Hz-20kHz +/-1dB @ 4 ohms
5Hz-50kHz +/-3dB @ 4 ohms
Product Dimension (H x W x D):
(MM): 481.6 x 286 x 88
(inches): 19.00" x 11.30" x 3.50"
Carton Dimension (H x W x D):
(MM): 579 x 409 x 180
(inches): 22.79" x 16.10" x 7.09"
Net Weight: 8.5kg/18.7lbs
Gross Weight: 9.5kg/20.9lbs
WX-8
WX-12
Stereo Power Output: 500 Watts, 8 ohms x 2
800 Watts, 4 ohms x 2
840 Watts, 2 ohms x 2
1650 Watts(Peak @ 1kHz, single) 4 ohms
AC 110-120V~50/60Hz or AC100V~50/60Hz;
AC 220-230V~50/60Hz or AC240V~50/60Hz
Frequency Response: 20Hz-20kHz +/-1dB @ 4 ohms
5Hz-50kHz +/-3dB @ 4 ohms
Product Dimension (H x W x D):
(MM): 481.6 x 401 x 88
(inches): 19.00" x 15.79" x 3.50"
Carton Dimension (H x W x D):
(MM): 594 x 558 x 180
(inches): 23.39" x 22.00" x 7.09"
Net Weight: 11.90kg/26.18lbs
Gross Weight: 15.00kg/33.00lbs
Stereo Power Output: 700 Watts,8 ohms x 2
1200 Watts,4 ohms x 2
1300 Watts,2 ohms x 2
2450 Watts (Peak @ 1kHz, single) 4 ohms
AC 110-120V~50/60Hz or AC100V~50/60Hz;
AC 220-230V~50/60Hz or AC240V~50/60Hz
Frequency Response: 20Hz-20kHz +/-1dB @ 4 ohms
5Hz-50kHz +/-3dB @ 4 ohms
Product Dimension (H x W x D):
(MM): 481.6 x 401 x 88
(inches): 19.00" x 15.79" x 3.50"
Carton Dimension (H x W x D):
(MM): 594 x 558 x 180
(inches): 23.39" x 22.00" x 7.09"
Net Weight: 13.50kg/29.70lbs
Gross Weight: 16.80kg/36.96lbs
50
XO Series
Crossovers
Electronics
The Wharfedale Pro XO Series active analogue crossovers facilitate simple creation of bi-amplified or tri-amplified sound
systems. The XO series employ analogue circuitry throughout with 24dB / octave Linkwitz Reilly filters. All models have 2
channels with global controls to retain the stereo imaging of the programme material.
Emphasis has been placed on the safety of your rig with a switchable 40Hz 12dB/octave HPF to increase headroom and
reduce the risk of driver over excursion. Independent switchable soft limiting on each of the outputs also helps to protect
your amp and speakers.
To help fine tune the setup of your system each individual output has a mute switch and phase reverse switch.
The XO series crossovers have independent output level controls ranging from -∞ to +6dB, to assist you there are LED
output meters and a simple input clip LED.
All inputs and outputs are available with balanced TRS or XLR connectivity, there is the inclusion of a mono summed LF
output for using a mono subwoofer in a stereo application. All units come in a 1U 19” rackmount chassis and accept mains
power via an IEC connector.
Key Features
• Simplified one control setup for both channels
• Professional 24dB/oct, Linkwitz Reilly filters
• Switchable 40Hz 12dB/oct HPF
• Four LED output level meters plus input clip indicator
• Independent phase switching of outputs
51
• Output mute switches with LED indicator
• Individual output level controls range from –∞ dB to +6dB
• Mono Sum Subwoofer output
• Input gain variable between –∞ and +6dB
• 1U, 19” Rack mount chassis
XO-204
XO-206
Connectors:1/4" TRS
Input Impedance: Balanced 20kW, unbalanced 10kW
Max Input Level: +20dBu
Output Impedance: Balanced/Unbalanced 100 ohms
Max Output Level: +21dBu
Subwoofer Output: 1/4" TRS
Product Dimension (W x D x H):
(MM): 483 x 173 x 44 (inches): 19.01" x 6.81" x 1.73"
Carton Dimension (W x D x H):
(MM): 535 x 282 x 54 (inches): 21.06" x 11.10" x 2.12"
Net Weight: 2.92kg/6.42Ibs
Gross Weight: 3.94kg/8.66Ibs
Connectors:1/4" TRS,
Input Impedance: Balanced 20kW, unbalanced 10kW
Max Input Level: +20dBu
Output Impedance: Balanced/Unbalanced 100 ohms
Max Output Level: +21dBu
Subwoofer Output: 1/4" TRS
Product Dimension (W x D x H):
(MM): 483 x 173 x 44 (inches): 19.01" x 6.81" x 1.73"
Carton Dimension (W x D x H):
(MM): 535 x 282 x 54 (inches): 21.06" x 11.10" x 2.12"
Net Weight: 2.97kg/6.53Ibs
Gross Weight: 3.99kg/8.77Ibs
XO-204X
XO-206X
Connectors: XLR
Input Impedance: Balanced 20kW, unbalanced 10kW
Max Input Level: +20dBu
Output Impedance: Balanced/Unbalanced 100 ohms
Max Output Level: +21dBu
Subwoofer Output: XLR (pin 2 hot)
Product Dimension (W x D x H):
(MM): 483 x 173 x 44 (inches): 19.01" x 6.81" x 1.73"
Carton Dimension (W x D x H):
(MM): 518 x 258 x 103 (inches): 20.39" x 10.15" x 4.05"
Net Weight: 2.92kg/6.42Ibs
Gross Weight: 3.96kg/8.71Ibs
Connectors: XLR
Input Impedance: Balanced 20kW, unbalanced 10kW
Max Input Level: +20dBu
Output Impedance: Balanced/Unbalanced 100 ohms
Max Output Level: +21dBu
Subwoofer Output: XLR (pin 2 hot)
Product Dimension (W x D x H):
(MM): 483 x 173 x 44 (inches): 19.01" x 6.81" x 1.73"
Carton Dimension (W x D x H):
(MM): 518 x 258 x 103 (inches): 20.39" x 10.15" x 4.05"
Net Weight: 2.97kg/6.53Ibs
Gross Weight: 3.99kg/8.77Ibs
Crossover
LMX-204
LMX-204
Electronics
The LMX-204 is a precision 2-way, dual channel analogue crossover with audiophile grade components. All inputs and
outputs have both balanced/unbalanced ¼” TRS jacks and balanced XLR connectors.
An LMX-204 is a great tool for getting the most from a system and can be used to increase clarity and power while
simultaneously protecting the drive units. The LMX-204 has adjustable delay on the low frequency band for accurate phase
alignment of subwoofers.
A host of tools are included to make tuning a system as simple as possible. The LMX-204 includes variable input gain and
frequency controls, mute and soft limit switching and a sweepable delay time control.
Key Features
• Professional Stereo 2-Way Crossover
• Audiophile Components
• Precision 24 dB/Octave Linkwitz-Riley Filters
• Excellent Phase Response Characteristics
• Individual output Gain controls for Each band
• Individual output Mute switches to aid setup
• Low Frequency Delay Control for Phase Alignment
• Switchable 40Hz High Pass filter to Increase Headroom
and prevent driver over excursion
• Precision potentiometers
LMX-204
Connectors: XLR (pin 2 hot) and 1/4" TRS jacks
Input Impedance: Balanced 20kW, unbalanced 10kW
Max Input Level: +20dBu balanced or unbalanced
Output Impedance: Balanced/Unbalanced 100 ohms
Max Output Level: +21dBu balanced/unbalanced into
100-120V~50/60Hz or 220-240V~50/60Hz
Product Dimension (H x W x D):
(MM): 44 x 482.6 x 173
(inches): 1.73" x 19" x 6.81"
Carton Dimension (H x W x D):
(MM): 100 x 500 x 255
(inches): 3.94" x 19.67" x 10.04"
Gross Weight: 3.7kg/8.14lbs
52
WPL-26
Speaker Switching System
Electronics
Wharfedale Pro have released the WPL-26 line level routing solution. Built using the highest quality components the
WPL-26 is suitable for use in a variety of environments from retail shops, recording studios and fixed installations. The
WPL-26 can make speaker comparisons simple and effective.
The WPL-26 has 2 stereo inputs using balanced ¼” TRS connectors with a mute button and left only button for routing a
mono signal to the outputs. 6 stereo outputs are available, also using high quality balanced ¼” TRS connectors.
High speed solid state signal switching is used and controlled either from the front panel mounted source and destination
buttons or from the supplied Infrared remote control. The infrared remote system has an external receiver with a 6m cable
to allow the WPL to be hidden from the line of sight.
Key Features
• High quality 2 x 6 signal switch
• Easy to use front panel controls:
o Power On/off
o Input channel selector switch (A/B)
o Output channel switches (1-6)
o Mute button
WPL-26
Input Impedance: UNBAL 10kW BAL 20kW,
Noise: -75dBu, Power Consumption: 10W
AC 100-240V~, 50/60Hz
Product Dimension (H x W x D):
(mm): 482.6 x 159.15 x 44
(inches): 19.00'' x 6.26'' x 1.73''
Carton Dimension (H x W x D):
(mm): 561 x 266 x 109
(inches): 22.08'' x 10.47'' x 4.29''
Net Weight: 2.65kg/5.83lbs
Gross Weight: 3.93kg/8.64lbs
53
• High speed solid state signal switching
• High quality connectors (1/4''/ 6.35mm)
• IR Remote control
• IR receiver with 6m cable
WPR-26
WPR-26 MKII
Electronics
The WPR-26 MKII is a high quality remote controlled loudspeaker switching system that is suitable for loudspeaker and
power amplifier comparison in retail and demonstration environments, the WPR-26 MKII helps create a perfect demo
environment.
The WPR-26 MKII is a great upgrade to make loudspeaker demonstrations much more professional, 2 dual channel power
amplifiers can be connected as sources and 6 pairs of passive loudspeakers can be connected as destinations. High power
handling relays (1000W+) allow you to switch between sets of speakers without having to re-route signal cables.
A front panel display gives visual feedback from the WPR-26 MKII including which input is selected and which destination
loudspeakers are active, there is also facility to mute all devices and use the left input channel only. The WPR-26 MKII is
designed to allow only one active destination, to avoid overloading the source amplifier with low impedance loads.
An IR remote control allows a demonstrator or customer to effortlessly switch between amplifiers and loudspeakers while in
an optimal listening position. The IR receiver has a 6m long cable that enables the equipment rack to be kept away from the
demonstration area.
Key Features
• High quality 2 x 6 signal switch
• Easy to use front panel controls:
o Power On/off
o Input channel selector switch (A/B)
o Output channel switches (1-6)
o Mute button
• High speed solid state signal switching
• High quality connectors
• IR Remote control
• IR receiver with 6m cable
WPR 26MKII
WPR 26 MKII
Noise: -105dBu, Power Consumption: 10W
AC 100-240V~, 50/60Hz
Product Dimension (H x W x D):
(mm): 482 x 225 x 45
(inches): 18.97'' x 8.85'' x 1.77''
Carton Dimension (H x W x D):
(mm): 611 x 109 x 325
(inches): 22.75'' x 22.36'' x 11.25''
Net Weight: 3.60kg/5.83lbs
Gross Weight: 4.55kg/10.01lbs
54
Q Series
Equalisers
Electronics
The Q series range of graphic equalisers have been designed from the ground up to provide the most transparent tonal
correction and feedback elimination possible, utilising constant Q filters to maintain even bandwidth irrespective of gain
making even severe adjustments remain transparent.
There are 3 models in the range catering for 1/3 octave and 2/3 octave frequency bandwidths with ISO centre frequencies.
Whatever your needs the Q series will assist you in achieving the best possible sound from your live rig or installation.
All models feature switchable 6dB / 12dB fader range and input gain ranging from -infinity dB to +6dB, in addition soft
limiting helps to prevent damage to your amp and speakers. A HPF has been included to remove unwanted low end and
improve headroom. There is a bypass switch and LED output meter to allow easy A/B comparison and assist correct gain
structure.
All models in the range are equipped with XLR / 1/4” TRS balanced / unbalanced connections and have ground lift switches
to eliminate any earth loop or hum issues. Power is supplied via an IEC connector.
Key Features
• Constant Q filters
• Switchable 6dB / 12dB fader range
• Switchable bypass with LED indicator
• Four LED output level meter plus input clip indicator
• Input gain adjustable between -∞ dB and +6dB.
• Built in soft limit helps prevent overloads that damage speakers.
• XLR/ 1/4” TRS balanced/unbalanced inputs/outputs.
• Ground lift switch quickly solves earth loop and external noise issues.
Q-130
1/4'' TRS, female XLR (pin 2 hot)
Balanced 20k ohm, unbalanced 10k ohm,
>+21dBu balanced or unbalanced, >40dB, typically >55dB at 1kHz,
Impedance-balanced/unbalanced, RF filtered, Balanced 100 ohm,
Unbalanced 50 ohm, >+21dBu balanced/unbalanced into 2k ohm or greater,
20Hz to 20kHz, +0.5/-1dB, <10Hz to >50kHz, +0.5/-3dB,
Signal-to-Noise: 90dB, THD + Noise: <0.004%,
Product Dimension (W x D x H):
(MM): 482.6 x 170 x 88 (inches): 19.00'' x 6.69'' x 3.46''
Carton Dimension (W x D x H):
(MM): 500 x 260 x 100 (inches): 19.68'' x 10.23'' x 3.93''
Net Weight: 4.00kg/8.80Ibs
Gross Weight: 5.45kg/11.99Ibs
Q-215
1/4'' TRS, female XLR (pin 2 hot)
Balanced 20k ohm, unbalanced 10k ohm,
>+21dBu balanced or unbalanced, >40dB, typically>55dB at 1kHz,
Impedance-balanced/unbalanced, RF filtered, Balanced 100 ohm,
Unbalanced 50 ohm, >+21dBu balanced/unbalanced into 2k ohm or greater,
20Hz to 20kHz, +0.5/-1dB, <10Hz to>50kHz, +0.5/-3dB,
Signal-to-Noise: 90dB, THD + Noise: <0.004%,
Product Dimension (H x W x D):
(MM): 482.6 x 168 x 44
(inches): 19.00'' x 6.61'' x 1.73''
Carton Dimension (W x D x H):
(MM): 500 x 260 x 56
(inches): 19.68'' x 10.23'' x 2.20''
Net Weight: 2.96kg/6.51Ibs
Gross Weight: 3.90kg/8.58Ibs
Q-230
55
1/4'' TRS, female XLR (pin 2 hot)
Balanced 20k ohm, unbalanced 10k ohm,
>+21dBu balanced or unbalanced, >40dB, typically>55dB at 1kHz,
Impedance-balanced/unbalanced, RF filtered, Balanced 100 ohm,
Unbalanced 50 ohm, >+21dBu balanced/ unbalanced into 2k ohm or greater,
20Hz to 20kHz, +0.5/-1dB, <10Hz to>50kHz, +0.5/-3dB,
Signal-to-Noise: 90dB, THD + Noise: <0.004%,
Product Dimension (H x W x D):
(MM): 482.6 x 168 x 88 (inches): 19.00'' x 6.61'' x 3.46''
Carton Dimension (W x D x H):
(MM): 500 x 260 x 100
(inches): 19.68'' x 10.23'' x 3.93''
Net Weight: 3.93kg/8.64Ibs
Gross Weight: 5.38kg/11.83Ibs
MICROPHONES
KM Microphones
Contact Microphones
DM Microphones
59
61
62
KM Series
Vocal/Instrument Microphones
The KM Series are high quality vocal and instrument microphones from Wharfedale Pro.
KM series microphones are designed to provide exceptionally clear, articulate sound with excellent off-axis rejection for
high gain before feedback in a live environment.
The KM Series Microphones are super-cardioid dynamic & cardioid condenser (KM-3) microphones available in a variety of
formats. The KM Series features polar response patterns that minimise feedback and help reject signals not originating in
front of the microphone.
The microphones have extended frequency response for optimum reproduction. They are designed to provide
exceptionally clear and articulate sound. A shock mounting system isolates the microphone element from external forces
to greatly reduce handling noise. The well-balanced zinc-alloy die cast body ensures reliable performance in even the
most demanding applications. The high sensitivity capsule picks up all of the nuances of a performance. A lightweight
neodymium magnet provides 6dB of additional sensitivity/gain compared to other magnetic materials.
Designed for high SPL use, the KM Series Microphones are ideal for mic'ing drums or other percussion instruments, but fit
into a wide range of applications. Using the mounting brackets, you can place the KM-4 & KM-5 mics on drums and other
instruments with ease.
Key Features
• High tech zinc finish
• 5 application specific models
• Unidirectional polar responses
• Neodymium magnets (Except KM-3)
• Dent-resistant steel grilles
• Rugged cast Zinc alloy body
• Gold-plated XLR connector
5
KM
Electronics
KM-1
KM-2
Hand held dynamic supercardioid microphone
Hand held dynamic supercardioid microphone
Frequency response 40-16,000Hz,
600 ohms, 51 dBV/Pa, >20dB
Product Dimension (W x D x H)
(MM): Ø51.5 x 178 xØ 22
(inches): 2.03'' x 7.01'' x 0.87''
Carton Dimension (W x D x H)
(MM): 115 x 230 x 70
(inches): 4.53'' x 9.06'' x 2.76''
Net Weight: 180g (6.3oz)
Gross Weight: 0.775kg/1.66Ibs
Frequency response 50-18,000Hz,
250 ohms, 53 dBV/Pa, >25dB
Product Dimension (W x D x H)
(MM): Ø45.5 x 178 x Ø23
(inches): 1.77'' x 7.01'' x 0.91''
Carton Dimension (W x D x H)
(MM): 115 x 230 x 70
(inches): 4.53'' x 9.06'' x 2.76''
Net Weight: 160.00g(5.6oz)
Gross Weight: 0.80kg/1.66Ibs
KM-3
KM-4
Small diaphragm overhead
/ instrument condenser mic
suitable for cymbals, acoustic
guitars, pianos and other
stringed instruments
Kick / tom mic suitable for
live sound reinforcement or
studio recording of kick drum,
toms, bass guitar and brass
instruments.
Frequency response 30-20,000Hz,
<1000 ohms, 46 dBV/Pa, >18dB,
Product Dimension (W x D x H)
(MM): Ø30 x 154 x Ø21
(inches): 1.18'' x 6.06'' x 0.83''
Carton Dimension (W x D x H)
(MM): 115 x 230 x 70
(inches): 4.53'' x 9.06'' x 2.76''
Net Weight: 120.00g (4.2oz)
Gross Weight: 0.60kg/1.39Ibs
Frequency response 30-12,000Hz,
250 ohms, 54 dBV/Pa, >20dB,
Product Dimension (W x D x H)
(MM): Ø58.6 x 77.8 x Ø27
(inches): 2.31''x 3.06'' x 1.06''
Carton Dimension (W x D x H)
(MM): 115 x 230 x 70
(inches):4.53'' x 9.06'' x 2.76''
Net Weight: 240.00g (8.5oz)
Gross Weight: 0.70kg/1.5Ibs
KM-5
Snare / tom mic suitable for
live sound reinforcement or
studio recording of kick drum,
toms, bass guitar and brass
instruments.
Frequency response of 50-16,000Hz,
250 ohms, 54dBV/Pa, >22dB ,
Product Dimension (W x D x H)
(MM): Ø45.2 x 61.3 x Ø24
(inches): 1.78'' x 2.41'' x 0.94''
Carton Dimension (W x D x H)
(MM): 115 x 230 x 70
(inches): 4.53'' x 9.06'' x 2.76''
Net Weight: 170.00g(6.0oz)
Gross Weight: 0.70kg/1.47Ibs
KMD-7
A 7 piece drum kit set (KMD-7) is
available in a protective moulded
case. This set, comprising 2 x KM3
overheads, 1 x KM4 kick/tom mic and 4
x KM5 snare/tom mic's provides a high
quality drum mic solution including all
mounting hardware.
Carton Dimension (W x D x H)
(MM): 480 x 405 x 408
(inches): 18.9'' x 15.94'' x 16.06''
Net Weight: 12.98kg/28.56Ibs
Gross Weight: 15.7kg/34.54Ibs
60
Contact
Handheld Wireless Microphones
The Contact Series from Wharfedale Pro are high performance UHF wireless handheld microphones. 2 models are
available in the range, with both single and dual channel options available.
All contact wireless systems feature automatic channel scanning. The receiver can scan through all available channels and
select the clearest for interference free reception. An IR link between the transmitter and receiver allows the receiver to
synchronize frequency information with the transmitter for one button, hassle free setup.
The 800T features a true diversity transmitter and receiver for seamless performance at distances over 55m. The 502A
features a pair of antenna diversity transmitters and receivers in a 19” 1U rackmountable chassis. All models in the Contact
Series use PLL synthesis for stable well timed performance.
Key Features
• PLL synthesis
• IR link for quick setup
• Receiver auto scanning
61
• Long reception range
• LCD display on transmitters
Contact 800T
Contact 502A
Frequency Response of 50Hz~18kHz (±3dB)
Sensitivity: 2μV(S/N>12dB 25kHz deviation)
Maximum Output Level: (MIC): -14dBV/100Ω,
(LINE): -4dBV/5kΩ
Product Dimension (W x D x H)
(MM): 220 ×160 × 44
(inches): 8.80'' x 6.40'' x 1.76''
Carton Dimension(W x D x H)
(MM): 480 x 470 x 400
(inches): 18.89'' x 18.50'' x 15.74''
Net Weight: 19.6kg/43.12lbs
Gross Weight: 21.00kg/46.20Ibs
Frequency Response of 60 - 15kHz (±3dB)
Sensitivity: 4μV(S/N>12dB 25kHz deviation)
Maximum Output Level: -14dBV/5kΩ
Product Dimension(W x D x H)
(MM): 420 x 195 x 44
(inches): 16.54'' x 7.68'' x 1.76''
Carton Dimension(W x D x H)
(MM): 590 x 430 x 310
(inches): 23.22'' x 16.92'' x 12.20''
Net weight: 18.4kg/40.84lbs
Gross Weight: 19.84kg/43.65lbs
DM-X & DM-S
DM-X & DM-S Microphones
Electronics
The New DM is a dynamic moving coil microphone designed to handle a wide variety of vocal and instrument applications
for both live sound and recording. This microphone is also available with an integral on/off switch(DM-S). Characteristics
of the DM-S and DM-X, such as a wide Supercardioid pickup pattern with a frequency response of 50Hz-16kHZ , slight
bass proximity and mid range presence result in a warm and natural response for nearly every type of voice. The DM-S
and DM-X is engineered to handle very high levels of gain without distortion and will provide over 20dB of off axis feedback
rejection.
Low impedance and balanced output allow interference free performance even with long cable runs. The DM-S and DM-X
is built solidly with a cast zinc alloy body, steel mesh grille ball and internal pop screen.
Key Features
• Professional performance - affordable price
• Tailored to sound excellent on a wide variety of vocals
• Built to withstand rigours of life on the road
• Available with on/off switch including durable nylon
mic cip and carrying
• Pouch with zip.
DM-X
DM-S
Frequency response 50Hz-16kHz,
600 ohms -52dB(at 1kHz 0dB=1V/Pa),
Available in a pack of 3 and single pack,
Mic/Connector 3 pin gold plated male XLR
Cable/Connector XLR type
Product Dimension (W x D x H)
(MM): Ø53 x 175 x Ø22
(inches): 2.09'' x 6.89'' x 0.87''
Carton Dimension (W x D x H)
(MM): 115 x 230 x 70 (Single Pack)
(MM): 280 x 229.2 x 78.5 (Three Pack)
Net Weight: 0.695kg/1.53Ibs
Gross Weight: 0.80kg/1.66Ibs (Single Pack)
&11.70kg/25.70lbs (Three Pack)
Frequency response 50Hz-16kHz,
600 ohms -52dB(at 1kHz 0dB=1V/Pa)
Available in a pack of 3 and single pack,with on/off switch
Mic/Connector 3 pin gold plated male XLR
Cable/Connector XLR type
Product Dimension (W x D x H)
(MM): Ø53 x 175 x Ø22
(inches): 2.09'' x 6.89'' x 0.87''
Carton Dimension(W x D x H)
(MM): 115 x 230 x 70 (Single Pack)
(MM): 280 x 229.2 x 78.5 (Three Pack)
Net Weight: 0.695kg/1.53Ibs
Gross Weight: 0.80kg/1.66Ibs (Single Pack)
&11.70kg/25.70lbs (Three Pack)
62
Value Integrity Performance

Similar documents