America`s Die Supply SuperStore

Comments

Transcription

America`s Die Supply SuperStore
America’s Die Supply SuperStore
For One Stop Shopping...
America’s Die Supply SuperStore!
One Stop Shopping allows you more time in production and less
time shopping! With AmeriKen’s SuperStore you can shop for all
your diemaking and diecutting supplies with one simple phone
call.
AmeriKen represents one of the most comprehensive inventories
available anywhere in the world. Not only can we boast the most
extensive line of the highest quality punches available, our custom
engineering capabilites are second to none. We carry a complete
line of diemaking and diecutting supplies.
When shopping America’s Die Supply SuperStore, you can check
off everything on your list...with one stop!
If you can't find the item you're looking for here in our handbook,
call us at 866-4-PUNCHES and we'll help you find it. If it's out
there, we can get it!
At AmeriKen, although we have the advantage of the largest
inventory and the most extensive product line in the business,
our number one priority is still the individualized service we
extend to each and every one of our most valuable assets . . .
our customers!
Join the AmeriKen eClub at ameriken.com and
you’ll receive our eClub newsletters containing special discounts and sales exclusive to eClub members.
We’ll register you to receive automated
tracking information for all your orders, and
you’ll be eligible for our Hot Hot Deals on our
clearance section at ameriken.com where we offer standard
products at special reduced rates.
Register today online at ameriken.com or ask your local representative to sign you up when placing your next order.
ameriken.com
d i e c u t t i n g p u n c hes
Punches, Tube. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Punches, Feed-Thru. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Punches, Side Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Punches, Perfect Cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Punches, Rotary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Punches, Specialty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Custom Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
d i e m a k i n g s u p p lies
Steel Rule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Dieboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Ejection Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Mallets & Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Ruling Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Perf-A-Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Jig Saw Blades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
d i e c u t t i n g s u p p lies
Creasing Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Make-Ready Supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Nicking Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Bobst Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
d i e m a k i n g e q u i pment
Helmold Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Re-Sharpening Services . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Bending Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Die Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
CAD Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
re s o u r c e s
Rule Specification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Conversion Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Circle Circumference/Diameter Chart. . . . . . . . . . . . . . . . . . 70
Accepted at all AmeriKen locations.
Standard Tube
With AmeriKen tube punches, punch
quality never deviates and uniformity
is absolute. AmeriKen punches mean
faster setup and less downtime because
you get consistent quality, consistent
sharpness, consistent long-life
performance.
Center Bevel
Base
Size
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1”
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
Inside Bevel
Outside Bevel
Outside Bevel
Cut Edge
Stock #
7/64
9/64
13/64
17/64
21/64
25/64
29/64
33/64
37/64
41/64
45/64
49/64
53/64
57/64
61/64
1-1/64
1-5/64
1-9/64
1-13/64
1-17/64
1-21/64
1-25/64
1-29/64
1-33/64
1-37/64
1-41/64
K-1
K-7
K-13
K-19
K-25
K-31
K-37
K-43
K-49
K-55
K-61
K-67
K-73
K-79
K-85
K-91
K-97
K-103
K-109
K-115
K-121
K-127
K-133
K-139
K-145
K-150
Cut Edge
3/32
3/32
5/32
7/32
9/32
11/32
13/32
15/32
17/32
19/32
21/32
23/32
25/32
27/32
29/32
31/32
1-1/32
1-3/32
1-5/32
1-7/32
1-9/32
1-11/32
1-13/32
1-15/32
1-17/32
1-19/32
1-21/32
Center Bevel
Stock #
K-0
K-2
K-8
K-14
K-20
K-26
K-32
K-38
K-44
K-50
K-56
K-62
K-68
K-74
K-80
K-86
K-92
K-98
K-104
K-110
K-116
K-122
K-128
K-134
K-140
K-146
K-151
Cut Edge Stock #
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1”
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
K-3
K-9
K-15
K-21
K-27
K-33
K-39
K-45
K-51
K-57
K-63
K-69
K-75
K-81
K-87
K-93
K-99
K-105
K-111
K-117
K-123
K-129
K-135
K-141
K-147
K-152
Standard heights: .918, .937, also available .923, 1, 1-1/8, 1-1/4,
1-1/2, 2.
Visit us online at ameriken.com
Standard Tube
Save time.... order ejectors with all your tube punches.
Rubber is available
in base sizes from
1/4" to 1-1/2".
Springs are available in all
base sizes up to 7/8".
Punch Marking - The Guessing Game is Over!
With the cut edge and base size strategically printed on our
punches, and even visible when mounted in a 5/8” dieboard, the
guessing game is over!
Punch Marking is available on all our tube and feed-thru
punches, and many others! Ask about Punch Marking the
next time you order punches.
Base
Size
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1”
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
Inside Bevel
Cut Edge
9/64
13/64
17/64
21/64
25/64
29/64
33/64
37/64
41/64
45/64
49/64
53/64
57/64
61/64
1-1/64
1-5/64
1-9/64
1-13/64
1-17/64
1-21/64
1-25/64
1-29/64
1-33/64
1-37/64
Stock #
K-4
K-10
K-16
K-22
K-28
K-34
K-40
K-46
K-52
K-58
K-64
K-70
K-76
K-82
K-88
K-94
K-100
K-106
K-112
K-118
K-124
K-130
K-136
K-142
Cut Edge
5/32
7/32
9/32
11/32
13/32
15/32
17/32
19/32
21/32
23/32
25/32
27/32
29/32
31/32
1-1/32
1-3/32
1-5/32
1-7/32
1-9/32
1-11/32
1-13/32
1-15/32
1-17/32
1-19/32
1-21/32
1-23/32
Stock #
Cut Edge
Stock #
K-5
K-11
K-17
K-23
K-29
K-35
K-41
K-47
K-53
K-59
K-65
K-71
K-77
K-83
K-89
K-95
K-101
K-107
K-113
K-119
K-125
K-131
K-137
K-143
K-148
K-153
7/64
11/64
15/64
19/64
23/64
27/64
31/64
35/64
39/64
43/64
47/64
51/64
55/64
59/64
63/64
1-3/64
1-7/64
1-11/64
1-15/64
1-19/64
1-23/64
1-27/64
1-31/64
1-35/64
1-39/64
1-43/64
1-47/64
K-00
K-6
K-12
K-18
K-24
K-30
K-36
K-42
K-48
K-54
K-60
K-66
K-72
K-78
K-84
K-90
K-96
K-102
K-108
K-114
K-120
K-126
K-132
K-138
K-144
K-149
K-154
Standard heights: .918, .937, also available .923, 1, 1-1/8, 1-1/4,
1-1/2, 2.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES Standard Tube Oval
An economical option to a machine punch.
Tube Oval Punches do not have full radius
ends. If a full radius is required, specify a
custom made AmeriKen punch.
Bevel Cut Edge
IB
IB
CB
CB
CB
IB
CB
IB
IB
CB
IB
IB
IB
IB
IB
IB
CB
IB
IB
IB
IB
CB
IB
IB
IB
IB
IB
CB
IB
IB
IB
IB
IB
IB
3/32 x 3/16
3/32 x 7/32
3/32 x 1/4
3/32 x 9/32
7/64 x 3/16
7/64 x 7/32
7/64 x 1/4
1/8 x 5/32
1/8 x 3/16
1/8 x 7/32
1/8 x 1/4
1/8 x 5/16
9/64 x 3/16
9/64 x 1/4
5/32 x 3/16
5/32 x 1/4
5/32 x 5/16
5/32 x 3/8
3/16 x 5/16
3/16 x 3/8
3/16 x 7/16
3/16 x 1/2
3/16 x 9/16
3/16 x 5/8
7/32 x 9/32
7/32 x 21/64
7/32 x 11/32
7/32 x 3/8
7/32 x 13/32
7/32 x 7/16
1/4 x 5/16
1/4 x 3/8
1/4 x 7/16
1/4 x 1/2
Stock
#
KOT-0612
KOT-0614
KOT-0616
KOT-0618
KOT-0712
KOT-0714
KOT-0716
KOT-0810
KOT-0812
KOT-0814
KOT-0816
KOT-0820
KOT-0912
KOT-0916
KOT-1012
KOT-1016
KOT-1020
KOT-1024
KOT-1220
KOT-1224
KOT-1228
KOT-1232
KOT-1236
KOT-1240
KOT-1418
KOT-1421
KOT-1422
KOT-1424
KOT-1426
KOT-1428
KOT-1620
KOT-1624
KOT-1628
KOT-1632
Bevel Cut Edge
CB
IB
IB
CB
IB
IB
CB
IB
IB
CB
IB
IB
CB
IB
IB
CB
IB
IB
IB
IB
IB
IB
IB
CB
IB
OB
IB
OB
OB
CB
CB
IB
OB
IB
9/32 x11/32
9/32 x 3/8
9/32 x 1/2
9/32 x 9/16
9/32 x 5/8
5/16 x 3/8
5/16 x 7/16
5/16 x 1/2
5/16 x 9/16
5/16 x 5/8
11/32x 3/8
11/32x 7/16
11/32x 1/2
11/32x17/32
3/8 x 7/16
3/8 x 1/2
3/8 x 9/16
3/8 x 5/8
3/8 x 3/4
7/16 x 1/2
7/16 x 9/16
7/16 x 5/8
7/16 x 3/4
1/2 x 5/8
1/2 x 3/4
1/2 x 7/8
1/2 x 1
9/16 x11/16
9/16 x 3/4
9/16 x13/16
9/16 x 1
5/8 x 3/4
5/8 x 7/8
5/8 x 1
Standard height: .937, other sizes available on request.
Visit us online at ameriken.com
Stock
#
KOT-1822
KOT-1824
KOT-1832
KOT-1836
KOT-1840
KOT-2024
KOT-2028
KOT-2032
KOT-2036
KOT-2040
KOT-2224
KOT-2228
KOT-2232
KOT-2234
KOT-2428
KOT-2432
KOT-2436
KOT-2440
KOT-2448
KOT-2832
KOT-2836
KOT-2840
KOT-2848
KOT-3240
KOT-3248
KOT-3256
KOT-3264
KOT-3644
KOT-3648
KOT-3652
KOT-3664
KOT-4048
KOT-4056
KOT-4064
Standard Cup
Made of solid bar stock, AmeriKen Cup Punches are
used primarily for score cutting.
Bevel Base
Size
CB
IB
CB
IB
OB
OB
CB
IB
IB
OB
OB
CB
IB
IB
OB
OB
CB
IB
IB
1/16
1/16
3/32
3/32
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
Cut
Edge
Stock
#
1/32
.052
5/64
.084
3/64
5/64
1/16
3/32
7/64
1/16
3/32
1/8
5/32
11/64
1/8
5/32
3/16
7/32
15/64
K-601
K-602
K-603
K-604
K-605
K-606
K-607
K-608
K-609
K-610
K-611
K-612
K-613
K-614
K-615
K-616
K-617
K-618
K-619
Bevel Base
Size
OB
OB
CB
IB
IB
OB
OB
CB
IB
IB
OB
OB
CB
IB
IB
OB
OB
CB
IB
IB
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
Cut
Edge
Stock
#
3/16
7/32
1/4
9/32
19/64
1/4
9/32
5/16
11/32
23/64
5/16
11/32
3/8
13/32
27/64
3/8
13/32
7/16
15/32
31/64
K-620
K-621
K-622
K-623
K-624
K-625
K-626
K-627
K-628
K-629
K-630
K-631
K-632
K-633
K-634
K-635
K-636
K-637
K-638
K-639
Standard height: .937, special cup punches in sizes quoted
on request.
Square Tube
Base
Size
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
3/16
3/16
1/4
5/16
5/16
5/16
3/8
3/8
3/8
1/16
3/32
1/8
5/32
3/16
7/32
1/4
17/64
9/32
KSQ-104
KSQ-106
KSQ-108
KSQ-110
KSQ-112
KSQ-114
KSQ-116
KSQ-117
KSQ-118
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
5/16
21/64
11/32
23/64
3/8
13/32
7/16
1/2
5/8
KSQ-120
KSQ-121
KSQ-122
KSQ-123
KSQ-124
KSQ-126
KSQ-128
KSQ-132
KSQ-140
Standard height: .937, spring ejectors available for all sizes except
1/16 and 3/32
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES Exact Cut Straight Wall
Inside Bevel Tube Punches for Narrow Places! Cutting
edge is the same size as the base for use in close quarters
where standard punches will not work. Eliminates the need
for mitering and is now possible to butt up steel rule or
other punches against the straight wall cutting edge of this
punch.
Base Size &
Cut Edge
Stock
#
Base Size &
Cut Edge
Stock
#
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
KSW-503
KSW-504
KSW-505
KSW-506
KSW-507
KSW-508
KSW-509
KSW-510
KSW-511
KSW-512
KSW-513
KSW-514
KSW-515
KSW-516
KSW-517
KSW-518
KSW-519
KSW-520
KSW-521
KSW-522
KSW-523
KSW-524
KSW-525
KSW-526
KSW-527
KSW-528
KSW-529
KSW-530
KSW-531
KSW-532
KSW-533
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1
KSW-534
KSW-535
KSW-536
KSW-537
KSW-538
KSW-539
KSW-540
KSW-541
KSW-542
KSW-543
KSW-544
KSW-545
KSW-546
KSW-547
KSW-548
KSW-549
KSW-550
KSW-551
KSW-552
KSW-553
KSW-554
KSW-555
KSW-556
KSW-557
KSW-558
KSW-559
KSW-560
KSW-561
KSW-562
KSW-563
KSW-564
Standard height: Precision ground .937 (accuracy ±.001), other
heights available. Call for quote.
Got Questions?
email us at [email protected]
Visit us online at ameriken.com
Straight Wall Plus
Made from rugged tool steel. Outside support bevel of .007 gives
these Staight Wall Plus punches the ability to make an even sharper
cut with even less pressure than the standard Straight Wall.
Base
Size
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
KSP-708
KSP-709
KSP-710
KSP-711
KSP-712
KSP-713
KSP-714
KSP-715
KSP-716
KSP-717
KSP-718
KSP-719
KSP-720
KSP-721
KSP-722
KSP-723
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
KSP-724
KSP-725
KSP-726
KSP-727
KSP-728
KSP-729
KSP-730
KSP-731
KSP-732
KSP-733
KSP-734
KSP-735
KSP-736
KSP-737
KSP-738
KSP-739
Standard height: .937, other sizes available on request.
Our vast inventory includes many decimal
and millimeter sizes.
In stock and ready to ship!
Vacuum Carbonitriding
All AmeriKen tube and feed-thru punches are case hardened
by vacuum carbonitriding, an exclusive heat
treating process performed in a scientifically
controlled vacuum environment, preventing the
formation of thin, weak spots which shorten
the cutting life of ordinary punches. Punch
quality never deviates, uniformity is absolute!
The magnification shows the hardened case
uniformity of an AmeriKen punch.
AmeriKen punches mean faster setup and less downtime
because you get consistent quality, consistent sharpness, and
consistent long-life performance.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES Feed-Thru
Feed-Thru punches are made from seamless
tubing and widely used by felt, leather,
and gasket manufacturers. The inside
diameter is relieved from the back to give
wide inside clearance, allowing pills to clear
smoothly through the base of the punch.
This eliminates stripping and permits heavier
material to be cut.
Miniature High Carbon Tool Steel
Base
Size
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
3/16
3/16
1/8
1/16
5/64
1/16
K-262
K-263
K-264
3/16
3/16
1/8
1/8
1/32
3/64
1/32
3/64
K-265
K-266
K-267
K-268
Base
Size
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
1-3/16
1-3/16
1-1/4
1-1/4
1-5/16
1-5/16
1-1/16
1-3/32
1-1/8
1-5/32
1-3/16
1-7/32
K-300
K-301
K-302
K-303
K-304
K-305
1-3/8
1-3/8
1-7/16
1-7/16
1-1/2
1-1/2
1-1/4
1-9/32
1-5/16
1-11/32
1-3/8
1-13/32
K-306
K-307
K-308
K-309
K-310
K-311
Oversized
Also available in feed-thru punches
Special hole sizes, heights, tube sizes, and bevels.
Punches for abrasive materials.
The ultimate concept in feed-thru punches!
AmeriKen’s exclusive "KUTS-ALL" line is
unmatched in the industry.
The KUTS-ALL was developed to cut specialty items
in the abrasives industry or to cut any material, like
adhesives, which is hard-to-feed. Special angles have
been engineered on the exterior and interior bevels
which “grab the waste”, resulting in a punch that cuts
longer, grabs better, and sets up faster! Results are
outstanding.
Available in diameters of 3/16” and larger.
Visit us online at ameriken.com
Feed-Thru
Base
Size
Cut
Edge
T/
XT
Stock
#
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
5/8
3/32
7/64
1/8
1/8
9/64
5/32
11/64
3/16
3/16
13/64
7/32
15/64
1/4
1/4
17/64
9/32
19/64
5/16
5/16
21/64
11/32
23/64
3/8
3/8
25/64
13/32
27/64
7/16
7/16
29/64
15/32
31/64
1/2
1/2
33/64
17/32
35/64
9/16
K-200
T KT-201
XT KE-202
K-203
K-204
K-205
T KT-206
XT KE-207
K-208
K-209
K-210
T KT-211
XT KE-212
K-213
K-214
K-215
T KT-216
XT KE-217
K-218
K-219
K-220
T KT-221
XT KE-222
K-223
K-224
K-225
T KT-226
XT KE-227
K-228
K-229
K-230
T KT-231
XT KE-232
K-233
K-234
K-235
T KT-236
XT QUOTE
Base
Size
Cut
Edge
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
15/16
15/16
15/16
15/16
15/16
1
1
1
1
1
1-1/16
1-1/16
1-1/16
1-1/16
1-1/16
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
9/16
37/64
19/32
39/64
5/8
5/8
41/64
21/32
43/64
11/16
11/16
45/64
23/32
47/64
3/4
3/4
49/64
25/32
51/64
13/16
13/16
53/64
27/32
55/64
7/8
7/8
57/64
29/32
59/64
15/16
15/16
61/64
31/32
63/64
1
1
1-1/64
1-1/32
1-3/64
1-1/16
T/ Stock
XT
#
T
XT
T
XT
T
XT
T
XT
T
XT
T
XT
T
XT
T
XT
K-237
K-238
K-239
KT-240
QUOTE
K-241
K-242
K-243
QUOTE
QUOTE
K-244
K-245
K-246
QUOTE
QUOTE
K-247
K-248
K-249
QUOTE
QUOTE
K-250
K-251
K-252
QUOTE
QUOTE
K-253
K-254
K-255
QUOTE
QUOTE
K-256
K-257
K-258
QUOTE
QUOTE
K-259
K-260
K-261
QUOTE
QUOTE
“T” indicates Thin Wall, “XT” indicates Extra Thinwall
“QUOTE” indicates special sizes quoted on request.
Standard height .937, also available in 1-1/8, 1-1/4, 1-1/2 and 2.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES Feed-Thru
Heavy Duty
When it comes to punching extra thick, tough materials,
these special feed-thru punches are a cut above the
standard line and will even "stack cut" materials up to 1/4".
Base
Size
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
KHD-200
KHD-201
KHD-203
KHD-204
KHD-205
KHD-206
KHD-208
KHD-209
KHD-210
KHD-211
KHD-213
KHD-214
KHD-215
KHD-216
KHD-218
KHD-219
KHD-220
KHD-221
KHD-223
KHD-224
KHD-225
KHD-226
KHD-228
KHD-229
KHD-230
KHD-231
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
3/4
13/16
13/16
13/16
7/8
7/8
7/8
15/16
15/16
15/16
1
1
1
1-1/16
1-1/16
1-1/16
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
11/16
45/64
23/32
3/4
49/64
25/32
13/16
53/64
27/32
7/8
57/64
29/32
15/16
61/64
31/32
KHD-233
KHD-234
KHD-235
KHD-236
KHD-237
KHD-238
KHD-239
KHD-240
KHD-241
KHD-242
KHD-243
KHD-244
KHD-245
KHD-246
KHD-247
KHD-248
KHD-249
KHD-250
KHD-251
KHD-252
KHD-253
KHD-254
KHD-255
KHD-256
KHD-257
KHD-258
Standard height: .937, ± .001 Tolerance
Miniature Heavy Duty
Base
Size
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
3/16
3/16
1/8
1/16
5/64
1/16
KHD-262
KHD-263
KHD-264
3/16
3/16
1/8
1/8
1/32
3/64
1/32
3/64
KHD-265
KHD-266
KHD-267
KHD-268
Need Discounts?
check out our clearance section
at ameriken.com
10 Visit us online at ameriken.com
Feed-Thru
Oval
These economical oval shaped punches are
engineered from our standard feed-thru line.
Cut Edge
1/8
1/8
5/32
5/32
3/16
3/16
3/16
3/16
3/16
7/32
7/32
7/32
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
9/32
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3/16
1/4
1/4
5/16
1/4
5/16
3/8
7/16
1/2
3/8
7/16
1/2
5/16
3/8
7/16
1/2
9/16
5/8
1/2
9/16
5/8
Stock
#
KOFT-0812
KOFT-0816
KOFT-1016
KOFT-1020
KOFT-1216
KOFT-1220
KOFT-1224
KOFT-1228
KOFT-1232
KOFT-1424
KOFT-1428
KOFT-1432
KOFT-1620
KOFT-1624
KOFT-1628
KOFT-1632
KOFT-1636
KOFT-1640
KOFT-1832
KOFT-1836
KOFT-1840
Cut Edge
5/16
5/16
5/16
11/32
11/32
11/32
3/8
3/8
3/8
3/8
7/16
7/16
1/2
1/2
1/2
1/2
9/16
9/16
5/8
5/8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
3/4
5/8
3/4
5/8
3/4
7/8
1
3/4
1
1
1-1/4
Stock
#
KOFT-2032
KOFT-2036
KOFT-2040
KOFT-2232
KOFT-2236
KOFT-2240
KOFT-2432
KOFT-2436
KOFT-2440
KOFT-2448
KOFT-2840
KOFT-2848
KOFT-3240
KOFT-3248
KOFT-3256
KOFT-3264
KOFT-3648
KOFT-3664
KOFT-4064
KOFT-4080
Standard height: .937, other heights and sizes available. Also
available in Heavy Wall.
Oversized Heavy Duty
Whenever you have a job where a standard feed-thru punch
may be too light, rely on these specials to do the trick. They are
manufactured to precision tolerance from high carbon tool steel
for extra long life. They cut sharp and stay sharp, and assure you
increased production and less down time than any other punch
on the market today.
Base
Size
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
1-3/16
1-3/16
1-1/4
1-1/4
1-5/16
1-5/16
1-1/16
1-3/32
1-1/8
1-5/32
1-3/16
1-7/32
KHD-300
KHD-301
KHD-302
KHD-303
KHD-304
KHD-305
1-3/8
1-3/8
1-7/16
1-7/16
1-1/2
1-1/2
1-1/4
1-9/32
1-5/16
1-11/32
1-3/8
1-13/32
KHD-306
KHD-307
KHD-308
KHD-309
KHD-310
KHD-311
Standard height: .937, other heights and sizes available. Also
available in Heavy Wall.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 11
Side Outlet Punches
Standard
Made from high carbon tool steel and vacuum
hardened, ensuring longer punch life. Available
in decimal sizes and with knurled bases. Also
available in special shapes, bases, heights, and
side holes.
Base Cut
Size Edge
Stock
#
Base
Size
Cut
Edge
1/8
3/16
1/8
3/16
1/8
3/16
1/8
3/16
3/16
1/4
3/16
1/4
1/4
5/16
1/4
5/16
1/4
5/16
1/4
5/16
5/16
3/8
5/16
3/8
5/16
3/8
K-400
K-401
K-402
K-403
K-404
K-405
K-406
K-407
K-408
K-409
K-410
K-411
K-412
K-413
K-414
K-415
K-416
K-417
K-418
K-419
K-420
K-421
K-422
K-423
K-424
K-425
3/8
13/32
3/8
13/32
3/8
7/16
3/8
7/16
7/16
15/32
7/16
1/2
1/2
9/16
1/2
1/2
17/32
9/16
5/8
1/2
9/16
1/2
9/16
5/8
9/16
5/8
15/64
15/64
1/4
1/4
17/64
9/32
9/32
19/64
5/16
5/16
21/64
21/64
11/32
11/32
23/64
3/8
3/8
3/8
3/8
25/64
25/64
13/32
13/32
13/32
27/64
27/64
1/32
1/32
3/64
3/64
1/16
1/16
5/64
5/64
3/32
3/32
7/64
7/64
1/8
1/8
9/64
9/64
5/32
5/32
11/64
11/64
3/16
3/16
13/64
13/64
7/32
7/32
Stock Base
#
Size
Cut
Edge
Stock
#
K-426
K-427
K-428
K-429
K-430
K-431
K-432
K-433
K-434
K-435
K-436
K-437
K-438
K-439
K-440
K-441
K-442
K-443
K-444
K-445
K-446
K-447
K-448
K-449
K-450
K-451
7/16
7/16
7/16
29/64
29/64
15/32
15/32
31/64
1/2
1/2
1/2
33/64
33/64
17/32
17/32
35/64
35/64
9/16
9/16
37/64
19/32
39/64
5/8
5/8
11/16
3/4
3/4
K-452
K-453
K-454
K-455
K-456
K-457
K-458
K-459
K-460
K-461
K-462
K-463
K-464
K-465
K-466
K-467
K-468
K-469
K-470
K-471
K-472
K-473
K-474
K-475
K-476
K-477
K-478
9/16
19/32
5/8
19/32
5/8
5/8
3/4
5/8
5/8
21/32
3/4
5/8
21/32
11/16
3/4
11/16
23/32
23/32
3/4
3/4
3/4
3/4
7/8
1
1
1
1-1/8
Standard height: .937, also available in .918, .923, 1, 1-1/8, 1-1/4,
1-1/2, 2. Also available with knurled bases.
Square
Base
Size
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
1/4
5/16
3/8
1/2
1/2
1/8
5/32
3/16
7/32
1/4
KSQ-408
KSQ-410
KSQ-412
KSQ-414
KSQ-416
1/2
1/2
5/8
5/8
3/4
9/32
5/16
3/8
7/16
1/2
KSQ-418
KSQ-420
KSQ-424
KSQ-428
KSQ-432
Standard height: .937
12 Visit us online at ameriken.com
Side Outlet Punches
Heavy Duty
A more powerful version of our standard side
outlets, allowing these punches to cut thicker,
tough-to-cut materials.
Base
Size
Cut
Edge
Stock
#
Base
Size
Cut
Edge
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
KHD-404
KHD-406
KHD-408
KHD-410
KHD-412
KHD-414
KHD-416
KHD-418
KHD-420
KHD-422
KHD-424
KHD-426
KHD-428
KHD-430
KHD-431
KHD-433
1/2
1/2
1/2
1/2
1/2
9/16
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
1
1
1-1/8
5/16
21/64
11/32
23/64
3/8
13/32
7/16
15/32
1/2
1/2
17/32
9/16
19/32
5/8
5/8
11/16
3/4
Stock
#
KHD-434
KHD-436
KHD-438
KHD-440
KHD-441
KHD-445
KHD-452
KHD-457
KHD-460
KHD-461
KHD-465
KHD-470
KHD-472
KHD-474
KHD-475
KHD-476
KHD-477
Standard height: .937, also available in .918, .923, 1, 1-1/8, 1-1/4,
1-1/2.
Rectangular
Base Size
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
x 5/16
x 5/16
x 1/2
x 1/2
x 1/2
x 5/8
x 1/2
x 5/8
x 5/8
x 3/4
x 3/4
x 1
Cut Edge
1/16
1/16
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
x
x
x
x
x
x
x
x
x
x
x
x
1/8
3/16
3/16
1/4
5/16
3/8
1/4
5/16
3/8
1/2
3/8
1/2
Stock #
KRSO-0408
KRSO-0412
KRSO-0812
KRSO-0816
KRSO-0820
KRSO-0824
KRSO-1216
KRSO-1220
KRSO-1224
KRSO-1232
KRSO-1624
KRSO-1632
Standard height: .937, also available in .918, .923, 1, 1-1/8, 1-1/4,
1-1/2.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 13
Side Outlet
Oblong
When shaping ovals with steel rule is too difficult, use our slot
type punch. It cleanly cuts thicker materials than is possible with
steel rule, is self cleaning, and punches out a precision slot where
Base
Size
1/4 F
1/4F
1/4F
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4F
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
x 5/16R
x 5/16R
x 5/16R
x 3/8
x 1/2
x 1/2
x 1/2
x 3/4
x 3/4
x 1
x 1
x 1
x 1-1/4
x 5/16R
x 1/2
x 1/2
x 1/2
x 1/2
x 1/2
x 3/4
x 3/4
x 1
x 1
x 1
x 1-1/4
x 1/2
x 1/2
x 1/2
x 1/2
x 1/2
x 1/2
x 3/4
x 3/4
x 1
x 1
x 1
x 1-1/4
x 1-1/2
x 1/2
x 1/2
Cut
Edge
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1/8
3/16
7/32
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
3/16
7/32
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
3/16
7/32
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
1-1/8
1/4
5/16
Stock
#
KOSO-0408
KOSO-0412
KOSO-0414
KOSO-0416
KOSO-0418
KOSO-0420
KOSO-0424
KOSO-0428
KOSO-0432
KOSO-0436
KOSO-0440
KOSO-0448
KOSO-0464
KOSO-0612
KOSO-0614
KOSO-0616
KOSO-0618
KOSO-0620
KOSO-0624
KOSO-0628
KOSO-0632
KOSO-0636
KOSO-0640
KOSO-0648
KOSO-0664
KOSO-0812
KOSO-0814
KOSO-0816
KOSO-0818
KOSO-0820
KOSO-0824
KOSO-0828
KOSO-0832
KOSO-0836
KOSO-0840
KOSO-0848
KOSO-0864
KOSO-0872
KOSO-1016
KOSO-1020
Standard height: .937, other heights available on request.
14 Visit us online at ameriken.com
Side Outlet
other punches or steel rule would break or spread
apart. Excellent for slotting chipboard, leather, felt,
compositions, plastics, and polycarbonates.
Base
Size
3/8 x 5/8
3/8 x 3/4
3/8 x 3/4
3/8 x 1
3/8 x 1
3/8 x 1
3/8 x 1-1/4
3/8 x 1-1/2
3/8 x 1/2
3/8 x 5/8
3/8 x 5/8
3/8 x 3/4
3/8 x 3/4
3/8 x 1
3/8 x 1
3/8 x 1
3/8 x 1-1/4
3/8 x 1-1/2
1/2 x 5/8
1/2 x 3/4
1/2 x 3/4
1/2 x 1
1/2 x 1
1/2 x 1
1/2 x 1
1/2 x 1-1/4
1/2 x 1-1/2
1/2 x 3/4
1/2 x 1
1/2 x 1
1/2 x 1
1/2 x 1
1/2 x 1-1/4
1/2 x 1-1/2
5/8 x 1
3/4 x 1
3/4 x 1
3/4 x 1
3/4 x 1-1/4
3/4 x 1-1/2
Cut
Edge
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3/8
7/16
1/2
9/16
5/8
3/4
1
1-1/8
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
1-1/8
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
1-1/8
3/8
1/2
9/16
5/8
3/4
1
1-1/8
1/2
9/16
5/8
3/4
1
1-1/8
Stock
#
KOSO-1024
KOSO-1028
KOSO-1032
KOSO-1036
KOSO-1040
KOSO-1048
KOSO-1064
KOSO-1072
KOSO-1216
KOSO-1220
KOSO-1224
KOSO-1228
KOSO-1232
KOSO-1236
KOSO-1240
KOSO-1248
KOSO-1264
KOSO-1272
KOSO-1620
KOSO-1624
KOSO-1628
KOSO-1632
KOSO-1636
KOSO-1640
KOSO-1648
KOSO-1664
KOSO-1672
KOSO-2024
KOSO-2032
KOSO-2036
KOSO-2040
KOSO-2048
KOSO-2064
KOSO-2072
KOSO-2432
KOSO-2436
KOSO-2440
KOSO-2448
KOSO-2464
KOSO-2472
Standard height: .937, other heights available on request.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 15
Special Shapes
PC11
Perfect Cut
A
B
C
.700
.270
.170
Traditional hanger and oval punches are PC11L
known to
deform,
.765
.335 have
.235
inconsistency in both the height and the body, and break easily,
resulting in on-press downtime and re-knifing
PC12 issues.
.893 .275 .180
AmeriKen's exclusive process on the Perfect Cut line delivers
PC12L .958 .340 .245
a punch which is twice as strong as the traditional punch and
eliminates deformation, inconsistencies and breakage issues.
PC13
1.093
.275
.180
After manufacturing we requalify the cut edge after the product is
PC13L 1.158 .340 .245
formed to ensure perfect quality
on
A
B everyCPerfect Cut punch.
PC11
.700
.270
PC14
.170
1.176
.295
.186
PC14L 1.241
.360
.250
The Benefits of the Perfect Cut Line:
u
u
u
u
u
u
PC11Lin the
.765industry
.335 .235
Highest tolerance
Consistent height on cut edges
PC15 1.180 .360
PC12 consistent,
.893 .275
.180
Bevel angle stays
no rollover
Perfect Fit!
Documented base for consistent fit PC15L 1.245 Perfect
.425
Cut!
50% stronger
than standard
punches
PC12L
.958 .340
.245
Perfect Quality!
PC16
1.180 .360
Perfect for kiss cutting
So Perfect
...There is
PC13
.275NO
.180
COMPETITION!
1.093
PC16L 1.245
Exclusively
from.425
AmeriKen
PC13L 1.158
.340
.245
PC14
.295
.186
1.176
Perfect Cut Hanger Hole
Shape
Stock #
A
B
C
.700
.270
.170
PC14L 1.241
PC11
PC15
PC11L
.765
1.180
.335
.360
Shape
.250
Stock #
A
B
C
PC14
1.176
.295
.186
PC14L
1.241
.360
.250
.360
.235
1.245.180
PC12PC15L
.893 .275
.425
PC15
1.180
.360
PC12L
.958
PC16
.340
1.180.245
.360
PC15L
1.245
.425
PC13
1.093
.275
.180
PC16
1.180
.360
PC13L
1.158
.340
.245
PC16L
1.245
.425
PC16L 1.245
.425
"L" punches can be used as a layover Standard heights: .918, .937,
1-1/8, 1-1/42
Custom Punch Out is
available for our Perfect Cut
Hanger Hole Punches!
16 Visit us online at ameriken.com
Special Shapes
Perfect Cut Oval
Cut Edge
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
5/32
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
Stock
#
KPCO-0608
KPCO-0612
KPCO-0616
KPCO-0620
KPCO-0624
KPCO-0628
KPCO-0632
KPCO-0636
KPCO-0640
KPCO-0644
KPCO-0648
KPCO-0656
KPCO-0664
KPCO-0672
KPCO-0680
KPCO-0808
KPCO-0812
KPCO-0816
KPCO-0820
KPCO-0824
KPCO-0828
KPCO-0832
KPCO-0836
KPCO-0840
KPCO-0844
KPCO-0848
KPCO-0856
KPCO-0864
KPCO-0872
KPCO-0880
KPCO-1216
KPCO-1220
KPCO-1224
KPCO-1228
KPCO-1232
KPCO-1236
KPCO-1240
KPCO-1244
KPCO-1248
KPCO-1256
KPCO-1264
KPCO-1272
KPCO-1280
KPCO-1620
KPCO-1624
KPCO-1628
KPCO-1632
KPCO-1636
KPCO-1640
KPCO-1644
Cut Edge
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3/4
7/8
1
1-1/8
1-1/4
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
11/16
3/4
7/8
1
1-1/8
1-1/4
Stock
#
KPCO-1648
KPCO-1656
KPCO-1664
KPCO-1672
KPCO-1680
KPCO-2024
KPCO-2028
KPCO-2032
KPCO-2036
KPCO-2040
KPCO-2044
KPCO-2048
KPCO-2056
KPCO-2064
KPCO-2072
KPCO-2080
KPCO-2428
KPCO-2432
KPCO-2436
KPCO-2440
KPCO-2444
KPCO-2448
KPCO-2456
KPCO-2464
KPCO-2472
KPCO-2480
KPCO-2832
KPCO-2836
KPCO-2840
KPCO-2844
KPCO-2848
KPCO-2856
KPCO-2864
KPCO-2872
KPCO-2880
KPCO-3236
KPCO-3240
KPCO-3244
KPCO-3248
KPCO-3256
KPCO-3264
KPCO-3272
KPCO-3280
KPCO-4044
KPCO-4048
KPCO-4056
KPCO-4064
KPCO-4072
KPCO-4080
Standard height: .937, other heights available on request.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 17
Rotary Punches
Serrated Rotary Tube
AmeriKen leads the rotary world
with the largest variety of serrated
punches available. From our most
economical line (Performance Plus)
to a unique curvature design (Radial
Top), AmeriKen has a serrated punch for every application!
Base
Size
Cut Edge
Outside Bevel
Stock #
Cut Edge
Center Bevel
Stock #
Cut Edge
Inside Bevel
Stock #
1/4
9/64 KRS-7
3/16 KRS-9
15/64 KRS-12
5/16
13/64 KRS-13
1/4
KRS-15
19/64 KRS-18
3/8
17/64 KRS-19
5/16 KRS-21
23/64 KRS-24
7/16
21/64 KRS-25
3/8
KRS-27
27/64 KRS-30
1/2
25/64 KRS-31
7/16 KRS-33
31/64 KRS-36
9/16
29/64 KRS-37
1/2
KRS-39
35/64 KRS-42
5/8
33/64 KRS-43
9/16 KRS-45
39/64 KRS-48
11/16
37/64 KRS-49
5/8
KRS-51
43/64 KRS-54
3/4
41/64 KRS-55
11/16 KRS-57
47/64 KRS-60
13/16
45/64 KRS-61
3/4
KRS-63
51/64 KRS-66
7/8
49/64 KRS-67
13/16 KRS-69
55/64 KRS-72
15/16
53/64 KRS-73
7/8
KRS-75
59/64 KRS-78
1”
57/64 KRS-79
15/16 KRS-81
63/64 KRS-84
1-1/16 61/64 KRS-85
1”
KRS-87 1-3/64 KRS-90
1-1/8
1-1/64 KRS-91 1-1/16 KRS-93 1-7/64 KRS-96
1-3/16 1-5/64 KRS-97
1-1/8 KRS-99 1-11/64 KRS-102
1-1/4
1-9/64 KRS-103 1-3/16 KRS-105 1-15/64 KRS-108
1-5/16 1-13/64 KRS-109 1-1/4 KRS-111 1-19/64 KRS-114
1-3/8 1-17/64 KRS-115 1-5/16 KRS-117 1-23/64 KRS-120
1-1/2 1-25/64 KRS-127 1-7/16 KRS-129 1-31/64 KRS-132
Standard heights: .970 and 1, other heights available are .937,
.990 and 1.023
Serrated Rotary Side Outlet
(Knurled Base)
Base
Size
1/4
5/16
3/8
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
1/8
3/16
1/4
KRS-412
KRS-420
KRS-428
7/16
1/2
5/8
3/4
5/16
3/8
7/16
1/2
KRS-434
KRS-441
KRS-454
KRS-462
Standard heights: .970 and 1, other heights available are .937,
.990 and 1.023
Need a Quote?
email us at [email protected]
18 Visit us online at ameriken.com
Rotary Punches
Performance Plus
Rotary
Base Size &
Cut Edge
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
Stock
#
KPP-12
KPP-18
KPP-24
KPP-30
KPP-36
KPP-42
KPP-48
KPP-54
KPP-60
KPP-66
KPP-72
KPP-78
KPP-84
QUOTE
KPP-108
Radial Top Rotary
Base Size &
Cut Edge
Stock
#
3/4
13/16
7/8
15/16
1
1-1/8
1-3/16
1-1/4
KRT-60
QUOTE
KRT-72
QUOTE
KRT-84
QUOTE
QUOTE
KRT-108
Standard heights: .970 and 1
Standard heights: .970, .990,
1 and 1.023, available in
inside bevel only.
The Radial Top Rotary Punch
The Punch with a “CURVE”
Standard
Blanket Eating
Punch
AmeriKen’s
Radial Top
Punch
Our unique curvature design
works with your process, not
against it!
Radial Top Rotary punches
eliminate "Wagon Tracks",
reduce damage to the dieboard,
require less cutting pressure, and
are blanket friendly.
Don't buy FLAT punches for
your ROTARY process. Order
Radial Top punches for your next
rotary job.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 19
Specialty Punches
Star (Cavity Style)
Base
Size
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
1/4
5/16
3/8
7/16
1/8
3/16
1/4
5/16
KSCS-0816
KSCS-1220
KSCS-1624
KSCS-2028
1/2
9/16
5/8
3/4
3/8
7/16
1/2
5/8
KSCS-2432
KSCS-2836
KSCS-3240
KSCS-4048
Standard height: .937, round base, center bevel, 5/16 shoulder
for 5/8 die board.
Kriss-Kross
Base
Size
1/8
1/4
3/16
1/4
Cut
Edge
Stock
#
Base
Size
Cut
Edge
Stock
#
1/8
1/8
3/16
1/4
KCP-0808
KCP-0816
KCP-1212
KCP-1616
5/16
3/8
1/2
5/8
3/4
5/16
3/8
1/2
5/8
3/4
KCP-2020
KCP-2424
KCP-3232
KCP-4040
KCP-4848
Standard height: .937, round base, center bevel, 5/16 shoulder
for 5/8 die board.
Common Knife Connectors
Knife connectors allow common-line knifing when several parts
are to be cut with one die. Positive rule joints are easily made
without troublesome brazing or welding through the machined
V-slot. Knife connectors will accept any center bevel rule.
2-Corner
4-Corner
Base
Size
Radius
Size
Stock
#
Base
Size
Radius
Size
Stock
#
1/2
1/2
5/8
3/4
7/8
1-1/8
1/8
3/16
1/4
5/16
3/8
1/2
KCK-20832
KCK-21232
KCK-21640
KCK-22048
KCK-22456
KCK-23272
1/2
1/2
5/8
3/4
7/8
1-1/8
1/8
3/16
1/4
5/16
3/8
1/2
KCK-40832
KCK-41232
KCK-41640
KCK-42048
KCK-42456
KCK-43272
Standard height: .937, round base, center bevel, 5/16 shoulder
for 5/8 die board.
Rolling Index
With or without “wings”. Available heights:
.918 and .937
20 Visit us online at ameriken.com
Specialty Punches
Relieved Punches
Some special applications
require a punch whose inside or
outside bevel must be relieved.
Heavy Wall Punches
This specialty punch answers
the need when a larger O.D. is
necessary or a thicker tubular
wall is required to make the
punch stronger.
Notched Punches
This custom punch has special
machined notches which allows
removal of the slugs as desired.
Long Bevel
Longer bevels help prevent
crushing of material, eliminating
dust and contaminents, and
make material easier to cut.
Pointed Punches
Available with either a sharp
end or a blunted end in base
sizes 1/8" and 3/16" for use as
a locator. Comes in standard
heights, other sizes on request.
Washer Sets
Virtually any configuration can
be custom manufactured. We
test your material to determine
the washer set that exactly fits
your needs.
Custom Punches
Custom punches can achieve tight
corners and intricate angles that far
surpass capabilities of steel rule dies. We
can produce shapes with cut edges as
small as .020” wide.
AmeriKen’s ultra sharp cutting edges
prevent angel hair and excessive diecutting dust. Precision heights
do away with the hassle of press adjustments. Folding and scoring
is easier.
To eliminate hand stripping, specially designed punches utilize
outlet inserts for slug removal in cramped places.
Specialty punches can be engineered so they support the steel
rule while cut edges are machined onto the block of steel, thus
eliminating tight spots and the need for costly special bases.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 21
Custom Tooling
Why Does Custom Tooling from AmeriKen
Stand Above the Rest?
Every job starts with
the highest grade tool
steel and is engineered
methodically utilizing the
skills and experience of
our knowledgeable staff.
After engineering, it is
then programmed and
proofed using state of
the art CAD software.
From there the job
is run on precision
CNC equipment, then
heat treated with our
exclusive vacuum
carbonitriding system.
After heat treating, the
tool is then ground
with exacting detail to
height and every job is
personally inspected
with high tolerance
measuring equipment
prior to shipping.
Combo Dies - Seamless Rule Body Punches
Segment Dies - Positive Stripping System
Special Applications
22 Visit us online at ameriken.com
Custom Tooling
Custom engineered tooling from AmeriKen takes the
diecutting process to the extreme! With our staff and industry
knowledge behind you, you can eliminate the term, “NO
QUOTE”, often stated by our competition. Virtually ANYTHING
is possible with AmeriKen’s creativity.
Our custom tooling is designed with such precision that you
can expect to reduce your cost per cut with decreased set up
time, automatic stripping, and increased tool life.
When you entrust AmeriKen with your tooling requirements,
one of our many standard services includes unlimited
consultations with our engineering staff. Our goal is not only
to meet your expectations, but to exceed them.
No Problems...Just Solutions!
For over half a century AmeriKen has been an innovator of
new ideas in the industry and a leader in solving difficult
diecutting problems. Simply send us your material with a
description of your goals and job requirements. We'll take it
from there and supply you with the most effective method for
cutting your parts.
At AmeriKen there are No Problems...Just Solutions!
A problem-solving innovation.
Cut from one material and place on another
in just one step with our Cut-And-Place Die.
Need a Quote?
email us at [email protected]
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 23
Steel Rule
AmeriKen carries the most comprehensive line of steel rule available
in the industry. From flat to rotary, cutting to creasing, 1/2 pt to 8pt.
When it comes to rule, no one offers a wider variety!
Over 3 Million Feet of Steel Rule in stock
Sizes up to 4" high and up to 8pt thick
Information needed when ordering:
u
u
u
u
u
u
u
u
u
u
Stock number if available
Type of rule (cutting, creasing, etc.)
Strips or coils (clockwise or counter clockwise)
Height (inches)
Pointage Decimal
Thickness (point)
.5
.007
Temper (hard, med, soft, etc.)
1
.014
Bevel (center, side, etc.)
1.5
.021
Number of teeth, space, etc.
2
.028
STNN or diameter (for rotary)
3
.042
Quantity (number of feet)
4
.056
6
8
24 Visit us online at ameriken.com
.084
.112
Steel Rule
Cutting Rule
AmeriKen stocks the world's leading brands so you get immediate
shipment on cutting rule of the highest quality to meet your rigid
requirements for high tolerances, bending properties, and durability.
The uniformity and quality of cutting rule we supply can benefit you
with lower press loads, dust-free cutting and reduction of makeready time.
Center Bevel
(Double Bevel)
Most popular bevel in
use today for standard
paperboard. It
combines the greatest
cutting ability and
resistance to dulling
and gives long life to
the die.
Center Face Double Bevel
(Double Long Bevel)
The second bevel relief
reduces the cutting
power required for
cutting thicker, heavier
materials such as
leather, cork, rubber,
composition materials
and thick corrugated or
chipboard.
Rotary Cutting Rule
AmeriKen carries a complete line of
rotary rules. With one of the largest
inventories available in the market,
many items are in stock and ready
to ship.
If we don't have an item in
stock, most rule can be custom
ordered and manufactured to your
specifications.
America’s Die Supply SuperStore
Side Bevel
(Single Bevel)
Recommended
where the stock is
exceptionally thick
or difficult to cut.
Particularly suitable for
gaskets, displays, and
close shapes.
Side Face Double Bevel
(Long Single Bevel)
This bevel requires
less pressure than
standard single bevel
to cut thicker, heavier
materials like the center
face double bevel.
Curve
24/90
35/90
37.5/90
36/90
39/90
38/90
40/90
45/90
50/90
51/90
53/90
59/90
66/90
66/45
67/90
86/90
Cylinder Size
(Diameter)
7
9-1/2
10-1/8
10-1/2
10-5/8
11
11-1/2
12-1/4
14-1/8
14-1/4
16-1/8
16-3/4
19-3/16
19-3/16
19-1/4
25-1/4
Call us at 866-4-PUNCHES 25
Steel Rule
Standard Creasing Rule
Manufactured to exacting standards to meet the needs
of today's high speed packaging equipment. We stock
various edge profiles to best handle your application
and supply you with the right creasing rule for less
frictional resistance between board and rule, thus
reducing any tendency to crack.
"Laser" Crease
This crease rule eliminates the need to cut wider slots on
lasered or jigged dies and also offers the flexibility of changing
the width of the crease without re-cutting the slot. Body
thickness is consistent with that of cutting rule with a wider
top.
There is minimal eccentricity with smooth transition from body
to creasing edge, assuring your cartons perfect shape and
functionability. There are several standard sizes in stock and ready
to ship.
Rotary Creasing Rule
AmeriKen carries a complete line of 4, 6, and 8pt rotary creasing
rule with heights from .400 to 4", curved or straight, notched or not
notched.
The "laser" crease above is also available in rotary sizes.
Combination Rule
Combination Cut-Crease, also called Perf-Score, Cut-Score, Deep
Space Perf. Available in 2, 3, and 4pt thicknesses with all toothspace combinations from 1/16" to 1" available. Carefully controlled
height of the cutting edge and depth of the gullet means crisp
creases without fracturing.
Zipper Rule
Available for both 5/8" and 3/4" dieboard
and left hand or right hand, in many different
patterns.
Edge Wave Rule
Edge wave is not full wave - only the
edge is waved with a straight body. This
eliminates the need to cut exceptionally
wide slots. Available in 2, 3, or 4pt,
heights from .375 to 2", and in many
different patterns.
26 Visit us online at ameriken.com
Steel Rule
Perforating Rule
Rely on AmeriKen for perforating rule of superb quality and
precision tolerances to meet the exacting needs of the converting
and business forms industries. You'll find the country's largest
inventory at AmeriKen, ready for immediate shipment. Many
combinations of the following specifications are in stock and ready
to ship:
Teeth: 1/32" to 1"
Tie: 1/32" to 1/2"
Height: 1/4" to 4"
Thickness: 2pt, 3pt, 4pt
Bevel: Center and side
Micro Perforating Rule
This unique rule eliminates folding problems of multi-part
continuous forms. Gives a clean cut edge appearance on this
material...assures even cut and tie regardless of penetration
depth, eliminating bursting problems and thereby reducing press
downtime. Many combinations are available with the following
common sizes typically in stock and ready to ship:
Teeth: 30, 50, 60, 70, 72 TPI
Tie: .015 - .030
Height: .918, .937
Thickness: 2pt, 3pt
Bevel: Center and side
Rotary Perforating Rule
Tooth or space configurations from 1/8" to 1"
Heights from .875 to 1"
Curved or straight, notched or not-notched
Also available as serrated
Steel Leads
.5pt available in .625 and .750
1pt available in .500, .625, and .750
1.5pt available in .625 and .750
2pt available in .500, .625, and .750
3pt available in .625 and .750
4pt available in .625 and .750
6pt available in .625 and .750
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 27
Dieboard
Flat Dieboard
The highest quality dieboard on the market, available at all
AmeriKen locations for convenient cost effective shipping.
Premium
7 Plys consisting of four Hard Rock Maple and three North
American Hardwood.
Ironwood
7 Plys consisting of four North American Beech and three North
American Hardwood
MP
7 Plys consisting two Red Maple and five North American
Hardwood.
Euro Birch
Our lowest cost laser compatible birch dieboard with mill 44 in
Russia.
All dieboard meets or exceeds
IADD specifications.
Rotary Dieboard
u
u
u
u
u
Superior thickness and diameter tolerances
Superior life on press
Superior rule holding ability
Superior reknifability
Superior 7-ply construction
Premium
7 Plys consisting of four Hard Rock Maple and three Red Maple.
Premium Mixed Core
7 Plys consisting of two Hard Rock Maple and five North
American Hardwood.
Ironwwod
7 Plys consisting of four North American Beech and three North
American Hardwood.
28 Visit us online at ameriken.com
Ejection
AmeriKen ejection materials
give your dies maximum compression set and consistent ejection.
See our charts on the following pages
for the products that are right for your
application. Of course you're also assured
the largest in-stock inventory, ready for
immediate shipment the very same day you order!
Superbond
Superbond Premium
Superbond Thick's delayed
drying time allows precise
placement
of ejection.
Superbond Thin's
quick drying time
feature is perfect
when you're in a
hurry!
Our premium
version adheres
to more rubber
types with more
consistent curing
time. Plus, it's
triple distilled for
less odor.
Less Odor!
Strip E-Z
A long time favorite, providing a tight grip but can
also be stripped off easily. Works well with all ejection
materials.
Sure Grip
Contact cement with very strong
adherence. Works with all ejection
materials.
Blast
Accelerator
A mist that is
sprayed onto the
dieboard to clean
out the pores for
better adhesion.
America’s Die Supply SuperStore
Spray Adhesive
Permanent or
temporary bond with
quick tack.
Call us at 866-4-PUNCHES 29
Ejection
Item Number
SF-100
Type, Sizes Available
Interchangeable with brands listed
Soft - Open Cell
1/4, 3/8, 1/2, 3/4, 1
MD-100
AK-4, ADS-7120, Diansuply 6320, Monroe 15700,
Kodiak KO-4
Medium - Open Cell
1/16, 1/8, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8
AK-65, ADS 6000, Diansuply B65, Monroe 01100,
Kodiak KO-2B, Die-Ejection 65 Black
MD-110
Medium - Open Cell
1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 1
MD-120
AK-3, Diansuply 6220, Monroe 02700, Kodiak
KO-3
Medium - Open Cell
3/8, 7/16, 1/2, 9/16, 5/8
AK-70, Diansuply F-70,Monroe R70, Kodiak KO11, Die-Ejection 70 Pink
MD-130
Medium - Open Cell
1/4, 3/8, 1/2
AK-19, ADS 7500, Kodiak KO-19, Die-Ejection 68
MD-140
MD-145
FR-100
Medium - Closed Cell, Premium
1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4,
7/8, 1”, 7mm
AK-257, ADS R497T, Diansuply G257, Monroe
12300, Kodiak KO-15, Die-Ejection 57
Medium - Closed Cell
1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4,
7/8, 1”, 7mm
AK-257E
Firm - Open Cell
3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8
AK-10, ADS-7185, Diansuply 6118, Monroe 06500,
Kodiak KO-10,
FR-110
Firm - Open Cell
3/8
AK-30, Diansuply Magma72, Kodiak KO-30
30 Visit us online at ameriken.com
Ejection
Item Number
XF-100
Type, Sizes Available
Interchangeable with brands listed
Extra Firm - Open Cell, Premium
1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 7mm
AK-1, ADS-7179, Diansuply 6110, Monroe 03500,
Kodiak KO-1, Die-Ejection 80 Red
XF-110
Extra Firm - Open Cell
1/4, 3/8, 7/16, 1/2, 9/16, 5/8
XF-120
AK-2, ADS-5140, Diansuply 61X, Monroe 14300,
Kodiak KO-2G
Extra Firm - Open Cell
1/4, 5/16, 3/8
CK-100
AK-75, ADS-8300, Diansuply T75, Monroe R-75,
Kodiak KO-18, Die-Ejection 75 Red
100% Cork
1/4, 5/16, 3/8
AK-8, Kodiak KO-8
CK-110
Medium Cork & Rubber
1/4, 11/32, 3/8
AK-14, ADS-RK374, Kodiak KO-14
CK-120
FM-100
Extra Firm Cork & rubber
1/16, 1/8, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8,
1/2, 5/8
AK-9, ADS-RS-80, Diansuply Cork, Monroe 13500,
Kodiak KO-9, Die-Ejection 95 Cork
Foam
Grey, White, Black, Yellow, Blue
AK-7, ADS-F1000, Diansuply Soft Foam, Monroe
07100, Kodiak KO-7, Die-Ejection Stripping Foam
GM-100
Gum Rubber
1/32, 1/16, 3/32, 1/8, 5/32, 3/16, 1/4
AK-6, ADS RG-40, Diansuply Gum, Monroe Gum,
Kodiak KO-6, Die-Ejection Gum Rubber
GM-110
Scallop Gum Rubber
1/16,
5/32
1/32,3/32,
1/16,1/8,
3/32,
1/8, 5/32, 3/16, 1/4
AK-6, ADS RG-40, Diansuply Gum, Monroe Gum,
Kodiak KO-6, Die-Ejection Gum Rubber
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 31
Ejection
Item Number
CR-110
CR-120
CR-130
SR-100
SR-110
Type, Sizes Available
Interchangeable with brands listed
Crease Rubber
.200, .225, .250, .275, .295, .300, .315, .325, .335,
.355, .370, .380, .395
National AU Kushion Crease
Crease Rubber
4.0, 5.0, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.7, 10.0,
10.5, 11.0 mm
National Std Kushion Crease, Bobst Flexi-Crease
Crease Rubber
Two sizes, one for single wall corrugated and one
for double wall corrugated
Shreiner Tri-Glide
Slot Rubber
1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,
11/16, 3/4, 7/8
AK-20T, Diansuply Dura-Bull, Kodiak KO-20T,
National Dura-Strip
Slot Rubber
.020, 1/32, 1/16
AK-22, Kodiak KO-22
SR-120
Slot Rubber
1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8
National Supercel 85
SR-140
Slot Rubber
3/8, 1/2
Shreiner Power Trap for Slots
SR-150
Slot Rubber
1/2, 9/16, 5/8, 3/4 Available in multiple durometers
Shreiner Roto-Slot
Our ejection materials are available in strips, sheets, or
blocks. They also come with or without PSA (pressure
sensitive adhesive.)
32 Visit us online at ameriken.com
Ejection
Item Number
PR-100
Type, Sizes Available
Interchangeable with brands listed
T Profile Rubber
5.0, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0,
10.5, 11.0 mm
Bobst
PR-110
PR-120
PR-130
D Profile Rubber
5.0, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5,
11.0 mm
Available in multiple durometers
Bobst, Shreiner
C Profile Rubber
5.0, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0,
10.5, 11.0 mm
Also available in soft or narrow.
Bobst, Shreiner
G Profile Rubber
6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 10.0, 10.5, 11.0 mm
Bobst
PR-140
Slot Profile Rubber
7 x 1, 7 x 2, 7 x 3, 7 x 4, 7 x 5, 10 x 1, 10 x 2, 10 x 3,
10 x 4, 10 x 5 mm (H x W)
Bobst Slot, Shreiner Concave
PR-150
T Profile Rubber for Slots
1/4, 3/8, 8.0 mm
Shreiner
PR-160
Rainbow Profile Rubber
1/16, 3/32, 1/8, 5/32
6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 mm
Bobst
PR-170
Sprintrubba Profile Rubber
7.0, 7.25, 8.0, 9.0, 9.5 mm
Bobst Rubba
Got Questions?
email us at [email protected]
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 33
Ejection
Item Number
SP-100
Type, Sizes Available
Interchangeable with brands listed
Black Bully
1/4, 3/8, 7/16, 1/2, 5/8, 3/4
Black Bully
SP-110
Blue Bully
1/4, 3/8, 7/16, 1/2, 5/8, 3/4
Blue Bully
SP-120
1/16, 1/8, 3/16, .24, 1/4, 5/16, .32, .36, 3/8, 7/16,
1/2, 9/16, 5/8
Diansuply GN 88, Monroe, Green G-rilla, Kodiak
Green Grizzly
SP-130
1/8, 3/16, 1/4, .28, 5/16, 3/8, 7/16, 1/2, 9/16,
5/8
Diansuply RO 73, Monroe Red Rhino, Kodiak
KO Red Grizzly
SP-150
Pro-Pel
1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 7mm
Monroe
SP-160
Power Trap
3/8
Available in multiple durometers
Shreiner
SP-170
Power Trap Chevron Corners
1/16,
3/8 3/32, 1/8, 5/32
Available in multiple durometers
Shreiner
SP-180
Power Trap for Slots
1/16,
1/8,w5/32
1/2” 3/32,
h x 1/4”
and 3/8” h x 1/4” w
Blue 45-50 Durometer
Shreiner
34 Visit us online at ameriken.com
Ejection
Item Number
PH-100
Type, Sizes Available
Interchangeable with brands listed
Punch Ejector
For base sizes 1/4 to 1-1/2. Also available pre-inserted
in punches.
Bobst, Shreiner
HH-100
Hanger Hole Ejectors
Available in a variety of shapes and sizes.
Special Cuts
SC-100
SC-110
SC-120
SC-130
SC-140
SC-150
Trapezoid, E-Z Set
Ejectoflex
Groovy G’rilla
Maxpoint
Sidewave
Tapered Slot from 1/4 to 3/4 width
Many of our ejection materials are available in the special
cuts shown above. Ask about the benefits of these special
cuts when placing your next order.
Email [email protected] to get a
copy of our Ejection Sample Book.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 35
Miscellaneous
Mallets
Rawhide - Low cost! The tool of choice for
years before synthetics developed.
Size Head Dia. Head Weight
Length
Type
Rawhide
Rawhide
Rawhide
Rawhide
Rawhide
Rawhide
Rawhide
Loaded Rawhide
Loaded Rawhide
Loaded Rawhide
Loaded Rawhide
Loaded Rawhide
Elastomer
Elastomer
Elastomer
Elastomer
Elastomer
Poly Urethane
Poly Urethane
Poly Urethane
Poly Urethane
0
1
2
3
4
5
6
7
8
9
10
11
#2
#4
#4L
#5
#6
#3
#4
#4L
#5
1
1-1/4
1-1/2
1-3/4
2
2-3/4
2-3/4
1-1/4
1-1/2
1-3/4
2
2-3/4
1-1/2
2
2
2-3/4
2-3/4
1-1/2
2
2
2-3/4
2
2-1/2
3
3-3/8
3-1/2
4-1/4
4-3/4
2-1/2
3
3-3/8
3-1/2
4-1/4
3
3-1/2
5
4-1/4
4-3/4
3-7/8
4
5
5
2 oz
4 oz
6 oz
9 oz
11 oz
22 oz
24 oz
8 oz
12 oz
16 oz
20 oz
40 oz
6 oz
11 oz
14 oz
22 oz
24 oz
8 oz
12 oz
15 oz
24 oz
Elastomer Reversible head provides
a fresh striking surface,
more even wear, and
twice the life of other
mallets. Outstanding
dead blow characteristic
minimizes spring back.
Elastomer minimizes
flaking onto dies. Cast
without air bubbles to
insure longer life and
greater strength.
Poly Urethane - Has
the same qualities as the Elastomer but has a tendency not to stick
to the rule as much and has less of a spring back.
Diemaker's Hammer
Produced from cast aluminum and impact
coated with a non-slip grip and comes with three
individual heads. 1-1/4” x 1-1/4”, gives plenty of
knuckle clearance; the tapered rear head is 3/4”
x 1-1/4”, for inserting small knives and punches;
and the unique bottom head is 1” x 1-1/4” for
rule setting. All are made of space-aged cast
urethane and are easily replaced.
Rule Setter
The rule setter ensures your rule is inserted
undamaged, perfectly seated and level with
every other rule in the dieboard.
Stripping Hammer
Highly polished striking head, sides and blades.
Square, flat face with beveled edges. Available in
12 oz & 16 oz.
36 Visit us online at ameriken.com
Miscellaneous
Rule Tweaker
The Rule Tweaker's
interchangeable handle
can be used with any of
the four available heads.
A handle in 2, 3, and 4pt
configurations is included,
as well as 1/2" and 1" heads.
3-1/2" and 6" heads sold separately.
Hand Rule Cutters
Handy rule cutter is designed to cut 2 and 3pt rule.
Also works well when cutting coils or as a
universal cutter when away from the
bench.
Accu-Sharp Rule Sharpener
The world's fastest rule sharpener.
Replacement Blades and Scissor
Sharpener also available!
Rule Pullers
Use these standard mechanic’s tools for
pulling rule from dieboards at a fraction
of the cost of “expensive” types. A large
selection of sizes available.
Mechanical Rule Puller
Extractor 2000
Extractor 2000 pulls rule straight up, saving kerf and
minimizing wear and tear on dieboards. Smooth lever
action generates up to 600 lbs of pulling power.
Mechanical Rule Puller
Extractor 3000
With the same versatile features as the 2000,the
Extractor 3000 takes pulling rule one step further with
the added convenience of smooth, adjustable pneumatic
power.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 37
Miscellaneous
Metal Perf-A-Type
Used extensively for coding corrugated containers. Available
in alphabet letters, numbers 0-9, and punctuation symbols, as
well as "recycled" logo. Sharp pronged
metal characters are 3/4" high on one inch
adhesive-backed bases for easy attachment
to flat or rotary dies. Also available without
adhesive. Conveniently predrilled holes
accomodate nails when necessary. Packaged in bags of six of the
same character.
Glue Assist Perf-A-Type
Available only at AmeriKen.
Mini Metal Perf, 1/2" high, are also available and come in bags of
six of the same character.
Metal Perf-A-Type Holder
Sturdy plastic holders allow easier placement and positioning.
Green for 1/2" dieboard in 5ft strips
Dark Blue for 1/2" dieboard in 3ft strips
Light Blue or Black for 5/8" dieboard in 3ft strips
Mini-Perf Holder in 39" strips
Misc. Ruling Tools
AmeriKen carries a large variety
of miscellaneous ruling tools,
including digital and paper
micrometers, tack hammers,
pocket scribes, and wood
chisels.
Corrugated Fasteners
Available in 3/8", 1/2" and 5/8"
Mylar Film
Available in matte frost on one
side, both sides, or clear.
Thickness: .003, .004, .005
Width: 36", 42", 48", 54," 60"
Roll Sizes 20, 50, 100 yds
Also available in sheets.
Ring Knives
Sizes 4, 5, 6, 7, 8, 9, 10, 11, 12
38 Visit us online at ameriken.com
Miscellaneous
Jig Saw Blades
At AmeriKen we make our own jig
saw blades so we can offer the
sharpest blade in the industry.
Our unique manufacturing
process produces the strongest,
highest quality blade you can buy.
Widths
1pt .010, .012
1-1/2pt .018
2pt .022, .025
3pt .030, .035
4pt .035
6pt .050
8pt
1/16
3/32
1/8
3/16
Thickness
Teeth per in. Lengths
8, 10, 12, 15
8, 10, 12, 15
8, 10, 12, 15
8, 10, 12, 15
6, 8, 10, 12
6, 8
8
4-13/16, 6-1/4
4-13/16, 4-7/8, 6, 6-1/4
4-13/16, to 6-1/4
4-7/8 to 6-1/4
4-7/8, 6, 6-1/4, 12
6, 6-1/4
4-7/8, 6, 6-1/4
Pins
None
Flat
Flat
Flat
Flat
None
None
Smooth Cutting Edges! Faster Cutting Speeds!
Blades Last Longer! Custom Sizes Available!
Saw Blades
Carbide tip saw blades
Regular circle saw blades
Pinch Dogs
Used to hold rotary dieboards 2" long.
Kori Clamp
The Kori Clamps attach to the wooden
support rails on the underside of the female
stripping tool. Works with the front centerline
notch in the female board and the machine
support frame to position and lock the tool in perfect alignment
for diecut sheet registration.
T-Nut Fasteners and Bolts
Round base - 3 straight prongs. Available
in a large selection of decimal and metric
sizes.
Die Bolts (Hex Head)
Two sizes: (100 to a box)
1/4" - 20 x 1"
5/16" - 18 x 1"
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 39
Miscellaneous
Kevlar and Leather Gloves
Kevlar gloves, available in open fingertip
or closed finger style. The PVC dots add
extra non-slip gripping power. Made from
Dupont Kevlar fibers similar to bulletproof
vest material. These gloves are lightweight,
comfortable and provide excellent cut
prevention.
Heavy-Duty Leather
Bundling Gloves
available in right or left hand.
Micrometer Adapter
Measuring rule and punch heights has never been easier. The VGroove in the center holds the punch
perpendicular to the face of the
barrels. The punch can be rotated for
multiple measurements.
Can be used on strips and coils and can
easily slide along the rule, allowing for
multiple measurements. Designed for rule and
punches 1" or less.
Spur Bits
Available individually or in 4 and 7-Piece Boxed Sets. 3-1/2" long
bits, can be used with any portable or stationary drill with 3/8" or
5/16" chuck capacity.
Diameters from 3/16" to 2", in
16th" increments, are in stock and
ready for immediate shipment.
Larger size diameters are also available.
4-Piece Set comes with 5/8", 3/4", 7/8", and
1" diameter bits.
7-Piece Set comes with 1/4", 3/8", 1/2", 5/8",
3/4", 7/8", and 1" diameter bits.
Got Questions?
email us at [email protected]
40 Visit us online at ameriken.com
Miscellaneous
Retractable Pins
An invaluable aid in locating and
registering elements of the die.
Retractable pins are steel in barrels of
aluminum. #P-103 has a brass barrel.
Stock
#
Pin
Diameter
Retractable Pin
(travel)
Barrel Size
dia. x length
P-100
P-102
P-101
P-104
P-102A
P-101A
P-132
P-103
1/8
1/8
1/8
1/8
1/8
5/32
1/4
1/8
1/4
1/2
9/16
13/16
1/4
9/16
7/16
9/16
1/4 x 5/8
1/4 x 3/4
1/4 x 1
1/4 x 1-1/4
1/4 x 3/4
1/4 x 1
11/32 x 3/4
3/16 x 1-1/32
Precision Registration Pins
Material slides over radius
corners much easier
than typical chamfered
tops. High tolerance pins
provide accurate locating.
Size
Size 1
Size 2
Size 3
Size 4
Pin
1/8
5/32
3/16
1/4
Body
1/4
1/4
5/16
3/8
Easily identify correct pin with
our unique marking system.
Spring Type Pins
Fits standard size holes, just drill and drive for
installing. Round edges along slot prevents scored
holes. Self-locking spring action is built-in locking
mechanism. Reusable, lightweight, yet strong.
Chamfered ends start easily.
Available in 5 diameters: 3/32", 1/8", 3/16", 1/4" & 3/8", all 2" long.
(Other lengths available on request.)
Stripping Pins
Size: 1/4" x 2" long
1,000 per box.
Available in 2mm, 3mm, 5mm, 10mm
Threaded stripping pins. 2mm, 3mm, 5mm
and 10mm. 100 per box.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 41
Creasing Supplies
Metal Base Matrix, Ken-Score
Ken-Score is easily cut, mitered, and positioned! It's matrix is
reinforced with
a flexible steel
base for optimum
strength and
wear resistance.
To install, fit the
removable locator
over the creasing
rule and peel
off the paper protecting the adhesive. Close the press and KenScore easily self locates and adheres to the cutting plate. Powerful
adhesive holds matrix securely
and accurately in place. No
SPECIFICATION
creeping or slipping. And there's
AND ORDER GUIDE no tedious make-ready.
To ensure the correct Ken-Score
specification is ordered, use the
following formula to determine
approximate channel width
required.
Board
Rule
x 2 )+ Creasing
(Thickness
Thickness
= Channel Width
Example:
Using a .012” caliper board and
2pt (.028”) creasing rule.
.012 x 2 (.024) + .028 = .052”
Creasing Rule Height
Due to its steel base, deduct .010”
from normal ceasing rule height
when using Ken Score.
At the end of the run, the matrix
removes easily without adhesive
residue. Among its many
advantages, Ken-Score matrix
is tapered to allow smooth,
uninterrupted feeding of any
material being diecut. KenScore assures uniform, split-free
creasing as never before.
Ken-Score features beveled
edges and a new channel
section manufactured to
exacting tolerances from
an advanced thermoplastic
polymer.
The double-sided adhesive system from 3M offers exceptional initial
tack plus adherence strength to rigidly hold during production runs
of any length. Yet, when the matrix is removed at the end of the run,
it lifts away cleanly without any residue on the platen.
The universal patented locator easily fits on several rule sizes,
eliminating the need to carry excess inventory.
Bobst Metrix & Shreiner Metal
AmeriKen also carries the complete line of Bobst Metrix and
Shreiner Metal metal base matrix.
42 Visit us online at ameriken.com
Creasing Supplies
Ken-Score Center Crease
Used for a single crease, for board .003" to .070"
Item
#24
#32
#40
#50
#60
#67
#75
#83
#90
#105
#120
#150
#150
#150
#200
#200
#250
#250
Black
Orange
Buff
White
Yellow
Violet
Green
Rose
Red
Blue
Brown
Grey 3-4pt
Grey 4-6pt
Grey 8pt
Black 3-4pt
Black 4-6pt
Cream 3-4pt
Cream 4-6pt
Width
.024
.032
.040
.050
.060
.067
.075
.083
.090
.105
.120
.150 3-4pt locator
.150 4-6pt locator
.150 8pt locator
.200 3-4pt locator
.200 4-6pt locator
.250 3-4pt locator
.250 4-6pt locator
Ft/
box
98
98
98
98
98
98
98
98
98
98
98
44
44
44
44
44
44
44
For Boards
.006 & under
.006 & under
.006 - .010
.010 - .015
.015 - .020
.015 - .017
.020 - .023
.023 - .026
.025 - .035
.030 - .040
.032 - .040
.033 - .050 & B-Flute
.033 - .050 & C-Flute
.033 - .050 & C-Flute
.050 - .070 & A-Flute
.050 - .070 & A-Flute
.060 & up and D.W.
.060 & up and D.W.
Ken-Score Off Center Crease
Used where cutting rule is close to creasing rule or to create a
double crease by combining two.
Item
#40-OC
#50-OC
#60-OC
Buff
White
Yellow
Width
.040
.050
.060
Ft/
For Boards
box
98 .006 - .010
98 .010 - .015
98 .015 - .020
Ken-Score Double Crease
Used for multiple creases required by file folders and large multifold brochures.
Item
#50-D1/8 White
#50-D3/16 White
#50-D1/4 White
#60-D1/4 Yellow
Width
.050
.050
.050
.060
Ft/
box
44
44
44
44
For Boards
.010 - .015
.010 - .015
.010 - .015
.015 - .020
Ken-Score Reverse Crease
Used to accomplish a crease in reverse. Crease matrix acts as the
male rule, and rule in the die acts as the channel.
#2pt
#3pt
#4pt
#4pt
#6pt
#6pt
Item
Width
Green
Blue
Brown
Brown
Black
Black
reverse .075
reverse .105
reverse .120
reverse .200
reverse .200
reverse .250
America’s Die Supply SuperStore
Ft/
box
98
98
44
44
44
44
For Boards
Lightweight
Md weight & E-flute
Hv weight, B&C-flute
Hv weight, B&C-flute
Hv weight & A-flute
Hv weight & A-flute
Call us at 866-4-PUNCHES 43
Creasing Supplies
Pressboard Base Matrix
AmeriKen carries Bobst Fibrix and Shreiner Pressboard in a
pressboard base matrix. Combining a pressboard channel with a
plastic base, it's easily skived for relief in trouble
spots. The wide base ensures proper locating,
ensuring a perfect registration every time.
Stock Channel Rule Board
#
dxw
pt.
Size
Stock Channel Rule Board
#
dxw
pt.
Size
Stock C
#
0308
0310
0311
0312
0313
0314
0315
0316
0317
0408
0410
0411
0412
0413
0414
0415
0416
0417
0419
0510
0511
0512
0513
0514
0515
0516
0517
0519
0521
0523
0612
0613
0614
0615
0616
0617
0619
0621
0623
0625
0627
0630
0632
0635
0640
0650
0660
0713
0714
0715
0716
0717
0719
0721
0723
0725
0727
0730
0732
0735
0740
0750
0760
0815
0816
0817
0819
0821
0823
0825
0827
0830
0832
0835
0840
0850
0860
1023
0.3 x 0.8
0.3 x 1.0
0.3 x 1.1
0.3 x 1.2
0.3 x 1.3
0.3 x 1.4
0.3 x 1.5
0.3 x 1.6
0.3 x 1.7
0.4 x 0.8
0.4 x 1.0
0.4 x 1.1
0.4 x 1.2
0.4 x 1.3
0.4 x 1.4
0.4 x 1.5
0.4 x 1.6
0.4 x 1.7
0.4 x 1.9
0.5 x 1.0
0.5 x 1.1
0.5 x 1.2
0.5 x 1.3
0.5 x 1.4
0.5 x 1.5
0.5 x 1.6
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
.006”
.014”
.018”
0.5 x 1.7
0.5 x 1.9
0.5 x 2.1
0.5 x 2.3
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.6 x 1.2
0.7 x 1.3
0.7 x 1.4
0.7 x 1.5
0.7 x 1.6
0.7 x 1.7
0.6 - 3.0 sizes: 59.3 ft per box
3.0 & Up sizes: 49.2 ft per box
Got Questions?
email us at [email protected]
44 Visit us online at ameriken.com
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
3/4
3/4
3/4
3/4
3/4
2/3
2/3
2/3
2/3
2/3
.022”
.026”
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
1.
Creasing Supplies
Many sizes are available in Off Center and Internal Chamfer (IC).
Pressboard is also available in U-Bend, intended for the depths and
widths combinations for E, B, and C flutes. They have a specially
designed locating system made to fit around the 2 crease rules,
allowing perfect registration from die to plate.
e Board
Size
Stock Channel Rule Board
#
dxw
pt.
Size
Stock Channel Rule Board
#
dxw
pt.
Size
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
3
3
3
3
3
0719
0721
0723
0725
0727
0730
0732
0735
0740
0750
0760
0815
0816
0817
0819
0821
0823
0825
0827
0830
0832
0835
0840
0850
0860
1023
1025
1027
1030
1032
1025
1040
1050
1060
1230
1232
1235
1240
1250
1260
1430
1432
1435
1440
1450
1460
1630
1632
1635
1640
1650
1660
.022”
.026”
0.7 x 1.9
0.7 x 2.1
0.7 x 2.3
0.7 x 2.5
0.7 x 2.7
0.7 x 3.0
0.7 x 3.2
0.7 x 3.5
0.7 x 4.0
0.7 x 5.0
0.7 x 6.0
0.8 x 1.5
0.8 x 1.6
0.8 x 1.7
0.8 x 1.9
0.8 x 2.1
0.8 x 2.3
0.8 x 2.5
0.8 x 2.7
0.8 x 3.0
0.8 x 3.2
0.8 x 3.5
0.8 x 4.0
0.8 x 5.0
0.8 x 6.0
1.0 x 2.3
2/3
2/3
2/3
2/3
2/3
2/3
3/4
3/4
4/6
4/6
4/6
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
3/4
3/4
4/6
4/6
4/6
2/3
.030”
.035”
1.0 x 2.5
1.0 x 2.7
1.0 x 3.0
1.0 x 3.2
1.0 x 2.5
1.0 x 4.0
1.0 x 5.0
1.0 x 6.0
1.2 x 3.0
1.2 x 3.2
1.2 x 3.5
1.2 x 4.0
1.2 x 5.0
1.2 x 6.0
1.4 x 3.0
1.4 x 3.2
1.4 x 3.5
1.4 x 4.0
1.4 x 5.0
1.4 x 6.0
1.6 x 3.0
1.6 x 3.2
1.6 x 3.5
1.6 x 4.0
1.6 x 5.0
1.6 x 6.0
2/3
2/3
2/3
3/4
3/4
4/6
4/6
4/6
3/4
3/4
3/4
4/6
4/6
4/6
3/4
3/4
3/4
4/6
4/6
4/6
3/4
3/4
3/4
4/6
4/6
4/6
.043”
.051”
.059”
.067”
Creasing Matrix Tools
Matrix bench presses and miter pliers from AmeriKen are an
essential part of your creasing tools supplies kit. Blades and anvils
are also available.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 45
Creasing Supplies
Pentra, Pressboard Base Matrix
.008 x .032 0208
.012 x .032 0308
S
.012 x .039 0310
S
.012 x .047 0312
S
.012 x .051 0313
S
.012 x .059 0315
S
.012 x .067 0317
.016 x .032 0408
S
.016 x .039 0410
S
.016 x .047 0412
S
.016 x .051 0413
S
.016 x .059 0415
S
.016 x .067 0417
S
.016 x .075 0419
.020 x .039 0510
S
.020 x .047 0512
S
.020 x .051 0513
S
.020 x .059 0515
S
.020 x .067 0517
S
.020 x .075 0519
.020 x .083 0521
.024 x .051 0613
S
.024 x .059 0615
S
.024 x .067 0617
S
.024 x .075 0619
S
.024 x .083 0621
.024 x .091 0623
.024 x .098 0625
.024 x .106 0627
.024 x .118 0630
.024 x .126 0632
.024 x .138 0635
.024 x .158 0640
.032 x .067 0817
.032 x .075 0819
.032 x .083 0821
.032 x .091 0823
2-3 pt rule, add "/23" to stock #
3-6 pt rule, add "/36" to stock #
Off Center, add "/OC" to stock #
46 Visit us online at ameriken.com
Channel
Stock
dep x wdth
#
.032 x .098
.032 x .106
.032 x .118
.032 x .126
.032 x .138
.032 x .158
.032 x .177
.032 x .197
.032 x .236
.032 x .276
.032 x .315
.039 x .091
.039 x .098
.039 x .106
.039 x .118
.039 x .126
.039 x .138
.039 x .158
.039 x .177
.039 x .197
.039 x .236
.047 x .158
.047 x .177
.047 x .197
.047 x .236
.055 x .158
.055 x .197
.055 x .236
.059 x .158
.059 x .197
.059 x .236
.063 x .158
.063 x .197
.063 x .236
.067 x .158
.067 x .197
.067 x .236
0825
0827
0830
0832
0835
0840
0845
0850
0860
0870
0880
1023
1025
1027
1030
1032
1035
1040
1045
1050
1060
1240
1245
1250
1260
1440
1450
1460
1540
1550
1560
1640
1650
1660
1740
1750
1760
2-3 pt.
3-6 pt
OC
S/ SV
Channel
Stock
dep x wdth
#
2-3 pt.
3-6 pt
OC
S/ SV
Pentra's creasing matrix system utilizes
ultra thin pressboard so there's no need to
calculate crease rule height adjustments in
order to compensate for matrix thickness. At
last, creasing matrix make-ready does not
require specialized skill.
SV
SV
SV
SV
SV
SV
SV
SV
Pentra S, add "/S" to stock #
Pentra SV, add "/SV" to stock #
Creasing Supplies
Plastic Base Matrix
AmeriKen carries both Bobst Syntrix and
Shreiner Plastic in a plastic base matrix. Durable
plastic channel that holds up well against
abrasive materials. Low profile for faster running
speeds with a low price for the most costeffective matrix choice.
Many sizes are available in Off Center and Internal Chamfer (IC).
IC has a more rounded internal profile, allowing the board to take
a slightly less traumatic route when the creasing rule forces it into
the matrix.
Call your local AmeriKen Representative for details and availability.
See a list of available sizes for plastic
base matrix on the following pages.
Shreiner Profile, Plastic Base Matrix
Profile matrix combines the benefits of both
plastic and fiberboard into the ultimate
creasing matrix.
The rolling profile, (the beveled edge rolls
from one side of the cutting plate to the other)
allows the material being cut to glide over the
matrix without snagging and reducing marks.
The low profile increases running speeds while decreasing makeready time by eliminating the need to tape the matrix down.
The durable plastic holds up well against abrasive stocks.
The sizes are printed directly on the channel for easy and instant
identification.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 47
Creasing Supplies
Plastic Base Matrix Sizes
Stock Channel Rule Board
#
dxw
pt.
Size
Stock Channel Rule Board
#
dxw
pt.
Size
Stock C
#
0306
0308
0310
0311
0312
0313
0314
0315
0316
0317
0319
0406
0408
0410
0411
0412
0413
0414
0415
0416
0417
0419
4508
4510
4511
4512
4513
4514
4515
4516
4517
4519
0508
0510
0511
0512
0513
0514
0515
0516
0517
0519
0521
0523
5508
5510
5512
5513
5514
5515
5516
5517
5519
5521
5523
0610
0611
0612
0613
0614
0615
0616
0617
0619
0621
0623
0625
0627
0630
0632
0635
0640
0650
0660
0670
0680
6513
6514
6515
6516
6517
6519
6521
6523
6525
6527
6530
6532
6535
6540
6545
6550
6560
6570
6580
0713
0714
0715
0716
0717
0719
0721
0723
0725
0727
0730
0732
0735
0740
0745
0750
0760
0770
0780
0815
0816
0817
0819
0821
0823
0825
0827
0830
0832
0835
0840
0845
0850
0860
0.3 x 0.6
0.3 x 0.8
0.3 x 1.0
0.3 x 1.1
0.3 x 1.2
0.3 x 1.3
0.3 x 1.4
0.3 x 1.5
0.3 x 1.6
0.3 x 1.7
0.3 x 1.9
0.4 x 0.6
0.4 x 0.8
0.4 x 1.0
0.4 x 1.1
0.4 x 1.2
0.4 x 1.3
0.4 x 1.4
0.4 x 1.5
0.4 x 1.6
0.4 x 1.7
0.4 x 1.9
.45 x 0.8
.45 x 1.0
.45 x 1.1
.45 x 1.2
.45 x 1.3
.45 x 1.4
.45 x 1.5
.45 x 1.6
.45 x 1.7
.45 x 1.9
0.5 x 0.8
0.5 x 1.0
0.5 x 1.1
0.5 x 1.2
0.5 x 1.3
0.5 x 1.4
0.5 x 1.5
0.5 x 1.6
0.5 x 1.7
0.5 x 1.9
0.5 x 2.1
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
.006”
.014”
.018”
.017”
.020
.019”
0.6 - 3.0 sizes, 78.8 ft per box
3.2 - 3.5 sizes, 59.3 ft per box
4.0 & Up sizes, 49.2 ft per box
48 Visit us online at ameriken.com
0.5 x 2.3
.55 x 0.8
.55 x 0.8
.55 x 1.2
.55 x 1.3
.55 x 1.4
.55 x 1.5
.55 x 1.6
.55 x 1.7
.55 x 1.9
.55 x 2.1
.55 x 2.3
0.6 x 1.0
0.6 x 1.1
0.6 x 1.2
0.6 x 1.3
0.6 x 1.4
0.6 x 1.5
0.6 x 1.6
0.6 x 1.7
0.6 x 1.9
0.6 x 2.1
0.6 x 2.3
0.6 x 2.5
0.6 x 2.7
0.6 x 3.0
0.6 x 3.2
0.6 x 3.5
0.6 x 4.0
0.6 x 5.0
0.6 x 6.0
0.6 x 7.0
0.6 x 8.0
.65 x 1.3
.65 x 1.4
.65 x 1.5
.65 x 1.6
.65 x 1.7
.65 x 1.9
.65 x 2.1
.65 x 2.3
.65 x 2.5
.65 x 2.7
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
3/4
3/4
3/4
4/6
4/6
4/6
4/6
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
.022”
.021”
.024”
.023”
.026”
.025”
.6
.6
.6
.6
.6
.6
.6
.6
.6
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
0.
Creasing Supplies
Plastic Base Matrix Sizes
le Board
t.
Size
Stock Channel Rule Board
#
dxw
pt.
Size
Stock Channel Rule Board
#
dxw
pt.
Size
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
6
6
6
6
3
3
3
3
3
3
3
3
3
3
6530
6532
6535
6540
6545
6550
6560
6570
6580
0713
0714
0715
0716
0717
0719
0721
0723
0725
0727
0730
0732
0735
0740
0745
0750
0760
0770
0780
0815
0816
0817
0819
0821
0823
0825
0827
0830
0832
0835
0840
0845
0850
0860
0870
0880
1023
1025
1027
1030
1032
1035
1040
1045
1050
1060
1070
1080
1230
1232
1235
1240
1245
1250
1260
1270
1280
1430
1432
1435
1440
1445
1450
1460
1470
1480
1630
1632
1635
1640
1645
1650
1660
1670
1680
.022”
.021”
.024”
.023”
.026”
.025”
.65 x 3.0
.65 x 3.2
.65 x 3.5
.65 x 4.0
.65 x 4.5
.65 x 5.0
.65 x 6.0
.65 x 7.0
.65 x 8.0
0.7 x 1.3
0.7 x 1.4
0.7 x 1.5
0.7 x 1.6
0.7 x 1.7
0.7 x 1.9
0.7 x 2.1
0.7 x 2.3
0.7 x 2.5
0.7 x 2.7
0.7 x 3.0
0.7 x 3.2
0.7 x 3.5
0.7 x 4.0
0.7 x 4.5
0.7 x 5.0
0.7 x 6.0
0.7 x 7.0
0.7 x 8.0
0.8 x 1.5
0.8 x 1.6
0.8 x 1.7
0.8 x 1.9
0.8 x 2.1
0.8 x 2.3
0.8 x 2.5
0.8 x 2.7
0.8 x 3.0
0.8 x 3.2
0.8 x 3.5
0.8 x 4.0
0.8 x 4.5
0.8 x 5.0
0.8 x 6.0
2/3
3/4
3/4
3/4
3/4
4/6
4/6
4/6
4/6
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
3/4
3/4
3/4
3/4
4/6
4/6
4/6
4/6
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
3/4
3/4
4/6
4/6
4/6
4/6
.027”
.025”
.030”
0.8 x 7.0
0.8 x 8.0
1.0 x 2.3
1.0 x 2.5
1.0 x 2.7
1.0 x 3.0
1.0 x 3.2
1.0 x 3.5
1.0 x 4.0
1.0 x 4.5
1.0 x 5.0
1.0 x 6.0
1.0 x 7.0
1.0 x 8.0
1.2 x 3.0
1.2 x 3.2
1.2 x 3.5
1.2 x 4.0
1.2 x 4.5
1.2 x 5.0
1.2 x 6.0
1.2 x 7.0
1.2 x 8.0
1.4 x 3.0
1.4 x 3.2
1.4 x 3.5
1.4 x 4.0
1.4 x 4.5
1.4 x 5.0
1.4 x 6.0
1.4 x 7.0
1.4 x 8.0
1.6 x 3.0
1.6 x 3.2
1.6 x 3.5
1.6 x 4.0
1.6 x 4.5
1.6 x 5.0
1.6 x 6.0
1.6 x 7.0
1.6 x 8.0
4/6
4/6
2/3
2/3
2/3
2/3
3/4
3/4
4/6
4/6
4/6
4/6
4/6
4/6
3/4
3/4
3/4
4/6
4/6
4/6
4/6
4/6
4/6
3/4
3/4
3/4
4/6
4/6
4/6
4/6
4/6
4/6
3/4
3/4
3/4
4/6
4/6
4/6
4/6
4/6
4/6
.035”
.041”
.051”
.059”
.067”
Need Discounts?
check out our clearance section
at ameriken.com
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 49
Creasing Supplies
Phenolic Counter Material
A high strength laminate based on fine woven glass fabric
reinforced surface layers and a kraft paper reinforced phenolic core.
The fiberglass reinforced surface
ensures high wear resistance.
Available in flex and designed
specifically to meet the exacting
requirements of the diemaking
industry.
Thickness Range (mm)
0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90,
0.95, 1.00, 1.10
Standard sheet size available is 1070mm x 1050mm and with or
without PSA.
Approved by NSAI to I.S. EN ISO 9002 Reg No. M409
Nylon Locating Pins
Reusable locators are designed to precisely transfer counters from
cutting dies to cutting plate for accurate registration. Available in
.316 Nylon, .316 Delrin or .321 Delrin.
Available with or without square nylon bushing
for pin. A snug-fitting rubber bushing which
fits around the pin for ejection purposes is
also available.
Vulcanized Fiber
An extra hard construction allowing for long runs and when you're
using recycled board. Available in 24" x 36" sheets, in .014, .016,
.018, .020, .022, .024, .026, .028, and .030.
Need Discounts?
check out our clearance section
at ameriken.com
50 Visit us online at ameriken.com
Make-Ready Supplies
Tape
Shim-O-Flex Shim Tape
Our self-adhesive shim tape
of hardened
stainless steel
is available in
the following
sizes (height,
width and
length):
.001
.002
.002
.002
.002
.004
.004
.004
.004
x
x
x
x
x
x
x
x
x
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
x
x
x
x
x
x
x
x
x
90'
33'
60'
100'
180'
30'
33'
90'
100'
White Spot Tape
.003 x 1/4 x 225'
.003 x 1/4 x 500'
.003 x 1/2 x 500'
.006 x 1/4 x 500'
.006 x 1/2 x 500'
PSA Spot Tape
.006 x 1/4 x 500' Kraft
.006 x 1/4 x 500' White
ProfiTape (self adhesive)
.03mm (.001) Blue, 115'/roll
.05mm (.002) Red, 82'/roll
.08mm (.003) Yellow, 60'/roll
Glassine Tape
.0015 x 1/4 x 500'
.0015 x 1/2 x 500'
We also carry bleached white kraft as well as double faced tape.
Carbon Paper
One-time .002 thick comes in 300 and 3,000 ft rolls.
Multi-use .005 thick comes in 150 and 1,500 ft rolls.
All rolls available in 24", 36", 45", and 54" widths.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 51
Make-Ready Supplies
Low Profile Adjusto Guides
A low profile adjusto guide for print-to-cut
registration and fast make-ready. Comes in
full size of 2" x 2" or half size 2" x 1".
Torque Quoin Key
The Torque Quoin Key reduces the chance of
breaking the quoin. The key allows 105 inch
pounds of torque, more than sufficient to hold
the die in place, even on Bobst presses.
One-Piece Quoins with Keys
One piece quoin comes in 3", 6", 9", and 12"
lengths and is capable of expanding from
48 to 60 points in 1 point steps from 0 to
12 points.
"T" handle key and 6" right key available with a non-slip cushion
grip. A 5-tooth replaceable key shank is also available.
Solid Steel Stop Pins
For close tolerance dies! 1/2" diameter, in heights .900 to .960.
Other heights and diameters available on special
order. Specify tolerance +/-.001 or +/-.0005.
Reverse Cut Scoring
Stop Guides
Available in a large one-piece
guide or a two piece small
guide size .937. Box of 100.
Two styles - Center and Offset
in 24" length. Standard size is
.030 height with .020 depth of
cut. Custom shapes, heights,
and depths available on
special order.
Got Questions?
email us at [email protected]
52 Visit us online at ameriken.com
Nicking Supplies
QuickNick Grinder
The 110 volt 1/10th HP motor is
standard and an optional 110 volt
1/8th HP variable speed motor is
available. A 3ft shaft is standard and
5ft and 6ft shafts are optional. The
Pneumatic QuickNick comes with a
regulator and 5ft distribution hose.
Other hose lengths are available.
Each grinder comes with 14 grinding
wheels for controlled nicks including:
.006, .008, .012, .016, .020, .025, .031,
1mm, .047, .063, .078, .094, .109, and
.125.
Nicking Chisel Set
The Nicking Chisel Set is a simple, inexpensive
tool for nicking dies. The set comes complete
with a knurled holder and three standard tips,
.020, .030 & .040. The male-threaded tip and
the female-threaded holder make changing tips
quick and simple.
Special tips
available: .010,
.015, .025 for use on medium hard rule
and .040, .050, .060, .070 & .080 for
use on all rule.
Grinding Wheels
Rubber bonded (max. 22,000RP).
1-1/2" dia with 1/8" hole in thicknesses:
.015, .020, .025, .030, .031, .040, .045,
.062.
1-5/8" dia with 9/32" hole in thicknesses: .008, .012, .016, .020,
.025, .031, .047, .063, .078, .094, 1.25.
2" dia with 1/8" hole in thicknesses: .015, .020, .025, .030, .031,
.040, .045, .062, .093, .125.
Reinforced 2" dia with 1/8" hole in thicknesses: thin (< .040),
medium (.045, .060), thick (.065, .080), extra thick (> .085)
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 53
Bobst Accessories
Center Line Parts
Centering Blocks. Centerline Stops. Black for use on the upper,
male stripping and red for use on the lower female stripper.
Bolt & Nut (Centerline)
43mm & 50mm
Spacers
7/8" and 1" nylon
Breaker Knives
Martin Hoops
Available for 7", 10.125",
14.4" and 19" diameters.
Also available for the Posilock
Miniline 7.
Trim Cut
Off Knives
AmeriKen carries the complete
line of Bobst Accessories.
54 Visit us online at ameriken.com
Miscellaneous
Diecutting Jackets & Plates
AmeriKen offers a large selection
of diecutting jackets for all nonconverted presses as well as
cutting, creasing, and back-up
plates for all diecutting presses.
Need Discounts?
check out our clearance section
at ameriken.com
Visit our clearance section at ameriken.com
Die Supplies Up to 50% Off
Visit our website, join our eClub, and browse through
our Clearance section where you’ll find die supplies
reduced by up to 50%. And, as an eClub member,
you’ll be notified each time we add items to the
clearance section, allowing you the first opportunity
to grab up those great deals.
Take a look at the items available in our clearance
section today. Simply go to ameriken.com, register
for the e-Club and see what supplies you can get
at substantial savings. In addition, as an e-club
member you’ll be notified everytime we add
additional items to the clearance section. It’s simple,
it’s free, and you have nothing to lose!
Diecutting Punches
Steel Rule
Creasing Matrix
Ejection Materials
Dieboard
Diemaking Equipment
All at reduced prices! Only while supplies last!
Join the e-Club today!
Members only special discounts and sales
Exclusive email notification when items are added to our clearance
section.
CLUB
ameriken.com
The eClub Newsletter with news, events, and special offers.
sign up today at
ameriken.com
BUY
8 6 66 - 4 -P
- PU N C H E S
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 55
Helmold Equipment
Helmold Equipment
AmeriKen carries the complete line of Helmold die room equipment.
Whether you're starting a new die shop, looking at re-knifing your
existing dies, or adding equipment to your existing shop, we can
recommend the right equipment to exactly suit your needs.
Call your local AmeriKen Representative or visit us online at
ameriken.com for complete information on the entire Helmold line.
u
u
u
u
u
u
u
u
u
u
u
Standard Bender
Heavy Duty Bender
Bender Bendall
E-Z Heavy Duty Bender
E-Z Bender Bendall
Rule Cutter
Single Miter Machine
Right and Left Hand Miter Machine
Standard Notcher
Heavy Duty Notcher
E-Z Heavy Duty Notcher
Heavy Duty Bender
Rule Cutter
E-Z Heavy Duty
Notcher
Single Miter Machine
Helmold E-Z Line
The E-Z line of tools have a toggle joint mechanism in the handle
so it delivers the same results as your traditional tools, with onequarter the elbow grease, giving you far
greater working force for your effort. The
handle also has ergonomic, variable hand
positioning for personalized comfort and
convenience. Order an E-Z Line tool and
see the difference yourself!
56 Visit us online at ameriken.com
Re-Sharpening Service
Manual Equipment - Did you know dull knives on cutting,
notching, and mitering machines produce poor quality dies and
can damage your equipment? When your knives begin to show
signs of wear and become dull, let
AmeriKen bring them back to life! We
have the experience and technology
to not only offer you precisely resharpened edges, but we can get your
tools turned around the same day
when necessary.
Automated Rule Benders- No matter what automated bender
you have, all tooling requires re-sharpening. Failure to follow a
regular maintenance schedule and avoiding signs of dull tools will
result in more breakage on the tools and leave a larger burr on
the rule.
AmeriKen has been offering precision
re-sharpening on bender tooling before
most automated systems were brought
to the market. We have the experience
and expertise to precisely re-sharpen
your
bender
tooling to
"as good
as new"
condition.
All Brands
2-3 Day Turnaround
Express One-Day Service - Our Express One-Day service
will have your knives on their way back to you the same day we
receive them. Advance notice is required for express service to
ensure sufficient time is available on the date we receive your
knives.
Call our Re-Sharpening Department at 800.553.7777 in Illinois or
800.553.6666 in Nevada to schedule an appointment.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 57
Dies for Rule Benders
All dies shown are for 2pt soft temper rule. The symbols indicate the
dies that can be opened up for thicker rule by milling a small portion
of the die. Dies not marked with any symbol cannot be opened up
to accommodate thicker rule.
58 Visit us online at ameriken.com
Dies for Rule Benders
u These dies can be opened up for 3 or 4 pt rule
s These dies can be opened up for 3 pt rule only
3 There is no need to open these dies up for 3 or 4 pt rule.
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 59
Manual Equipment
Laborsaber Die Saws
AmeriKen carries the complete line of Laborsaber die saws. For
complete descriptions and information, please visit us online at
www.ameriken.com or call your local AmeriKen representative.
DJ Model
E Model
ES Model Sidearm
Wood-E Model
For complete specifications,
visit us online at
ameriken.com
Cutawl Saws
Cutawl saws are high-speed, portable precision saws specially
designed for making rotary and flat dies. They cut hard maple or
birch dieboard quickly and easily, unlike
commercially available sabre-type saws
which burn out quickly. Straight lines,
curves, or intricate patterns are simple
to cut with a free-floating 360 degree
swivel head.
The curved base plate for making rotary
dies is high quality, one-piece cast
aluminum. The flat base plate is made of stainless steel. Both the
flat and rotary models will accomodate blades to cut 2, 3, or 4pt
kerf and have standard 115v 50-60 Hz motor.
Optional equipment includes a 230v 50-60 Hz motor, a radio
frequency interference suppresser, and a safety gauge (required in
Canada).
K-12F for Flat dieboards
K-12C-50 for 50" Rotary dieboards
K-12C-66 for 66" Rotary dieboards
AmeriKen also carries a complete
line of Cutawl parts and blades
60 Visit us online at ameriken.com
CAD Software
CimPACK - Each of these products is built around the same
core software, a general purpose CAD engine called CimCAD, so
they share the same user
interface and file format.
The specialized licensing
process allows you to pick
the product(s) that fits
your needs.
CimPACK for Designers
- Consists of a large library
of standard designs,
and mix and match, so
you can create a one-up design and then lay it out to a printed
sheet. This is the correct choice if you are doing folding carton or
corrugated work but do not need to create any of the advanced
pre-press tooling. Parametric design capability is also included.
CimPACK for Diemakers - The standard Diemakers software
includes tools for adding punches, hanger holes, and die edges.
It also contains the tools for adding stripping/breaker knives,
balancing rules, and chase registration holes. This is a good choice
for gasket and label companies as well as diemakers who do not
require pre-press tooling.
The advanced Diemakers software includes the standard features
plus all the pre-press tooling.
CimPACK Complete - This product includes the Designers and
Advanced Diemaker features.
CimPACK for Rotary Diemakers - Rotary features can be added
to CimPACK complete and both of the CimPACK for Diemakers.
Got Questions?
email us at [email protected]
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 61
62 Visit us online at ameriken.com
Econo Corr, 2pt
Econo Corr, 3pt
Econo Corr, 4pt
Top, 2pt
Top, 3pt
Top, 4pt
H75, 2pt
H75, 3pt
H75, 4pt
Universal, 2pt
Universal, 3pt
Universal, 4pt
Universal 60, 2pt
Universal 60, 3pt
Universal 60, 4pt
Universal 75, 2pt
Universal 75, 3pt
53
53
53
53.42
53.42
53.42
53
53
53
53, 42
53, 42
53, 42
53
53
53
53
53
Bevel
Angle
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
46
46
46
45
45
45
51
51
51
34
34
34
45
45
45
51
51
Standard Body
Edge Type RW
46
46
46
45
45
45
51
51
51
57
57
57
57
57
57
58
58
Edge
RW
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
TH
TH
TH
TH
TH
TH
TH
TH
TH
HF
HF
HF
HF
HF
HF
HF
HF
.016
.024
.043
.012
.024
.043
.067
.138
.256
.012
.016
.028
.012
.024
.043
.067
.138
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Body Edge Decarb Edge Min
Max
Coat. Coat. Thick- Hard- Bend Angle
ness ening Radius @Min
Bend
.937
.937
.937
.900 to .937
.900 to .937
.900 to .937
.918 to.937
.918 to .937
.918 to .937
.918 to .937
.918 to .937
.918 to .937
.918 to .937
.918 to .937
.918 to .937
.937
.937
Standard Heights
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
Height
Tolerance
Edge type: G-Ground, S-Shaved. Edge hardening: I-Induction, HF-High Frequency, L-Laser, P=Plasma, SC=Specialty Coating, TH-Through Hardened
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
Manufacturer & Rule Name
Rule Specification
Bohler
America’s Die Supply SuperStore
Universal 75, 4pt
Univ Supreme, 2pt
Univ Supreme, 3pt
Univ Supreme, 4pt
Univ K-Back, 2pt
Univ K-Back, 3pt
Univ K-Back, 4pt
Stabilocut
X-tra
Label-X
Plast-X
Lazer Blade
Helmex
Helmex
S-70
S-70
70
53
47
47
47
45
45
45
73
42
35,42,53
42
40, 50, 60
40, 50, 60
60
40, 50, 60
60
40, 50, 60
Bevel
Angle
S
S
G
S
G
S
S
G
G
G
S
S
S
S
S
51
34
34
34
34
34
34
34
40
40
40
33-35
40-42
40-42
43-46
43-46
47-50
Standard Body
Edge Type RW
58
57
57
57
57
57
57
57
60
57
59
59-61
40-42
40-42
43-46
43-46
47-50
Edge
RW
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
.001
.0005
.0005
.0005
.0005
.0005
HF
SP
SP
SP
HF
HF
HF
HF
HF
HF
HF
L
N
N
N
N
N
.256
.016
.024
.043
.012
.016
.028
NA
NA
.012
.012
.005
.015
.015
.040
.040
.062
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
160
160
160
180
180
180
Body Edge Decarb Edge Min
Max
Coat. Coat. Thick- Hard- Bend Angle
ness ening Radius @Min
Bend
.937
.900 to .937
.900 to .937
.900 to .937
.918 to .937
.918 to .937
.918 to .937
.937
.937
.275, .472
.929, .937
.918, .923, .937
.918, .923, .937
.918, .923, .937
.918, .923, .937
.918, .923, .937
.918, .923, .937
Standard Heights
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.001
±.001
±.001
±.001
±.001
±.001
Height
Tolerance
Edge type: G-Ground, S-Shaved. Edge hardening: I-Induction, HF-High Frequency, L-Laser, P=Plasma, SC=Specialty Coating, TH-Through Hardened
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
HE
HE
HE
HE
HE
HE
Manufacturer & Rule Name
Rule Specification
Bohler, Helmold
Call us at 866-4-PUNCHES 63
64 Visit us online at ameriken.com
70
MM40
MM44
MM47, 2pt
MM47, 3pt
MM47, 4pt
HF34
HF40
HF44, 2pt
HF44, 3 & 4pt
HP34
HP40
HP44, 2pt
HP44, 3 & 4pt
Maxim Std
Maxim Std w/EH
60
42, 54
42, 54
42, 54
42, 54
42, 54
42, 54
42, 54
54
54
54
42, 54
54
54
52
52
Bevel
Angle
G
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Edge
RW
47-50 47-50
40
40
44
44
47
47
47
47
47
47
34
51
40
51
44
51
44
51
34
61
40
61
44
61
44
61
HS60
HS48
Standard Body
Edge Type RW
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N .0005
N
NA
N
NA
N
NA
N
NA
N
NA
N
NA
N
NA
N
NA
N
NA
N
NA
N
NA
N
NA
N
NA
N .002
N .002
N .062 180
TH .008 NA
TH .008 110
TH .008 110
TH .020 110
TH .039 110
HF .008 NA
HF .008 NA
HF .008 NA
HF .016 NA
I/P .008 NA
I/P .008 NA
I/P .008 NA
I/P .016 NA
TH
.40
TH
.40
Body Edge Decarb Edge Min
Max
Coat. Coat. Thick- Hard- Bend Angle
ness ening Radius @Min
Bend
.918, .923, .937
.937
.937
.937
.937
.937
.918 - .937
.918 - .937
1.25
1.25
.937
.918 - .937
.937
.937
.918, .937
.937
Standard Heights
±.001
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0002
±.0002
Height
Tolerance
Edge type: G-Ground, S-Shaved. Edge hardening: I-Induction, HF-High Frequency, L-Laser, P=Plasma, SC=Specialty Coating, TH-Through Hardened
HE
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MX
MX
Manufacturer & Rule Name
Rule Specification
Helmold, Martin Miller, Maxim
America’s Die Supply SuperStore
Nataloy
Premium
Medium Hard
Medium
70 Hard
75 Hard
80 Hard
Dieflex, 2pt
Dieflex, 3pt
Dieflex Ultra, 2pt
Dieflex Ultra, 3 & 4pt
Dieflex Hard
Dieflex Brite
Dieflex MicroNik
XD-700
DieHard Xtreme
DieHard Razor
52
52
52
52
52
52
52
42, 52
42, 52
42, 52
42, 52
42, 52
42
NA
42
42
30
Bevel
Angle
S
S
S
S
G
G
G
S
S
G
G
S
G
S
S
G
G
40
36-39
41-44
36-39
46-49
49-51
51-54
39
35
39
39
41
39
39
41
47
47
Standard Body
Edge Type RW
40
50-52
41-44
36-39
46-49
49-51
51-54
57
57
57
57
57
57
57
60
59
59
Edge
RW
N
N
N
N
N
N
N
N
N
Y
Y
N
N
N
N
N
N
N
N
N
N
N
Y
Y
N
N
N
N
Y
N
NA
NA
NA
NA
NA
NA
NA
.0035
.0035
.0035
.0035
.0035
NA
NA
.0035
NA
NA
N
I
N
N
N
N
N
HF
HF
SC
SC
HF
HF
HF
HF
HF
HF
.016 90
.032 90
.016 90
.500 90
NA
NA
NA
NA
.0138 60
.0138 60
.0138
.0138
.0138
NA
NA
NA
NA
.0138 110
NA
NA
.0138 NA
Body Edge Decarb Edge Min
Max
Coat. Coat. Thick- Hard- Bend Angle
ness ening Radius @Min
Bend
.918, .937, 1, 1.125, 1.250
.918, .937
.918, .937, 1.50, 2
.918, .937
.918, .937
.918, .937
.918, .937
.937
.937
.937
.937
.937
.937
.937
.937
.937
.937
Standard Heights
±.0001
±.0001
±.0001
±.0001
±.0001
±.0001
±.0001
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
Height
Tolerance
Edge type: G-Ground, S-Shaved. Edge hardening: I-Induction, HF-High Frequency, L-Laser, P=Plasma, SC=Specialty Coating, TH-Through Hardened
NL
NL
NL
NL
NL
NL
NL
SV
SV
SV
SV
SV
SV
SV
SV
SV
SV
Manufacturer & Rule Name
Rule Specification
National, Sandvik
Call us at 866-4-PUNCHES 65
66 Visit us online at ameriken.com
Dieflex Platinum, 2pt
Dieflex Platinum, 3pt
Superblade
Superblade Hard
Superblade J1
Superblade Self Leveling
#70
MH
70 Hard
75 Hard
80 Hard
Automate
Sharp One
TXB
MicroNik
42, 52
42, 52
30, 42, 58
58
30, 42
42
58
58
52
52
52
52
60 42
60, 42
42
Bevel
Angle
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
39
33
36
45
36
36
46
41
46-49
49-51
51-54
34-37
37-50
40-43
42-45
Standard Body
Edge Type RW
N
N
N
N
N
N
N
N
N
N
N
N
N
NA
NA
.002
.002
NA
NA
NA
NA
NA
NA
.001
NA
.001
SC
SC
I
I
I
I
I
I
N
N
N
I
N
N
N
.020
.020
.020
.020
.020
.020
.500
NA
NA
.016
.062
.016
.062
120
90
120
120
90
100
90
NA
NA
90
180
20
180
Body Edge Decarb Edge Min
Max
Coat. Coat. Thick- Hard- Bend Angle
ness ening Radius @Min
Bend
*
*
53
Y
60
Y
53
Y
53
Y
46
Y
41
Y
46-49 N
49-51 N
51-54 N
50-52 N
37-50 N
40-43 N
42-45 N
Edge
RW
.918, .923, .937
.937
.918, .937
.937
.918, .923, .937
.918, .923, .937
.918, .937
.918, .937
.918, .937
.918, .937
.918, .937
.918, .937
.937
Standard Heights
±.0008
±.0008
±.0008
±.0008
±.0008
±.0008
±.0001
±.0001
±.0001
±.0001
±.001
±.001
±.001
Height
Tolerance
Edge type: G-Ground, S-Shaved. Edge hardening: I-Induction, HF-High Frequency, L-Laser, P=Plasma, SC=Specialty Coating, TH-Through Hardened
SV
SV
TS
TS
TS
TS
TS
TS
ZI
ZI
ZI
ZI
ZI
ZI
ZI
Manufacturer & Rule Name
Rule Specification
Sandvik, Tsukatani Hamono, Zimmer
Conversion Charts
Millimeters to Inches
MM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
INCHES
.0394
.0787
.1181
.1575
.1969
.2362
.2756
.3150
.3543
.3937
.4331
.4724
.5118
.5512
.5906
.6299
.6693
.7087
.7480
.7874
.8268
.8661
.9055
.9449
.9843
1.0236
1.0630
1.1024
1.1417
1.1811
1.2205
1.2598
1.2992
1.3386
1.3780
1.4173
1.4567
1.4961
1.5354
1.5748
1.6142
1.6535
1.6929
1.7323
1.7717
1.8110
1.8504
1.8898
1.9291
1.9685
America’s Die Supply SuperStore
MM
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
INCHES
2.0079
2.0472
2.0866
2.1260
2.1654
2.2047
2.2441
2.2835
2.3228
2.3622
2.4016
2.4409
2.4803
2.5197
2.5591
2.5984
2.6378
2.6772
2.7165
2.7559
2.7953
2.8346
2.8740
2.9134
2.9528
2.9921
3.0315
3.0709
3.1102
3.1496
3.1890
3.2283
3.2677
3.3071
3.3465
3.3858
3.4252
3.4646
3.5039
3.5433
3.5827
3.6220
3.6614
3.7008
3.7402
3.7795
3.8189
3.8583
3.8976
3.9370
Call us at 866-4-PUNCHES 67
Conversion Charts
Fraction, Decimal, Millimeters
68 Visit us online at ameriken.com
Conversion Charts
Fraction, Decimal, Millimeters
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 69
Circle Charts
Diameter & Circumference 1" to 6-15/16"
For those really small circles 1/32" to 17/32"
70 Visit us online at ameriken.com
Circle Charts
Diameter & Circumference 7" to 12-15/16"
For those really small circles 9/16" to 31/32"
America’s Die Supply SuperStore
Call us at 866-4-PUNCHES 71
Notes
866-4-PUNCHES (866-478-6243)
ameriken.com
[email protected]
Illinois
618 N. Edgewood Ave
Wood Dale, IL 60191
800.553.7777
630.766.6226
630.766.6588 Fax
Nevada
2280 Conestoga Dr
Carson City, NV 89706
800.553.6666
775.882.4453
775.882.4782 Fax
Georgia
119 Pounds Dr
Tucker, GA 30084
888.941.5097
770.935.9033
770.935.1465 Fax
Texas
625 N. Great Southwest Pkwy
Arlington, TX 76011
800.858.1699
817.652.1041
817.652.2760 Fax
Florida
800.969.9521
904.741.1000
904.741.1900 Fax

Similar documents