Parts Manual for REAR ENGINE RIDER SERIES 22

Transcription

Parts Manual for
REAR ENGINE RIDER
SERIES 22
MODELS
280922B
W280922B
281022BE
281222BE
300922B
301022BE
W301022BE
301222BE
3314522BVE
331522KVE
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE
AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH
CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
COPYRIGHT © 2002
SNAPPER INC.
ALL RIGHTS RESERVED
(Rev. 1, 06/30/02)
MANUAL No. 06128
CONTENTS
DESCRIPTION
PAGE
WHEELS, FRONT ........................................................................................................................ 3
WHEELS, REAR ....................................................................................................................4 & 5
FRONT END, STEERING ......................................................................................................6 & 7
MAIN CASE............................................................................................................................8 & 9
DIFFERENTIAL, R.H. FENDER ........................................................................................10 & 11
CHAIN CASE, L.H. FENDER .............................................................................................12 & 13
SMOOTH CLUTCH ASSEMBLY .......................................................................................14 & 15
CUTTING DECKS, DEFLECTORS ....................................................................................16 & 17
RAILS, LIFT ARMS, CAM LIFT .........................................................................................18 & 19
BLADE STOP PEDALS ............................................................................................................. 20
SPINDLE ASSEMBLY ............................................................................................................... 21
BELTS, BRAKES, INTERLOCK ........................................................................................22 & 23
DRIVE DISC ASSEMBLY .......................................................................................................... 24
FUEL TANK & OPERATOR’S SEAT......................................................................................... 25
ENGINES & EXHAUST MUFFLER............................................................................................ 26
THROTTLE CONTROL.............................................................................................................. 27
DECALS .............................................................................................................................28 & 29
ELECTRICAL SYSTEMS (For 9 HP Briggs, Recoil Start)...............................................30 & 31
ELECTRICAL SYSTEMS (For 10 & 12 HP Briggs) ..........................................................32 & 33
ELECTRICAL SYSTEMS (For 14.5 HP Briggs)................................................................34 & 35
ELECTRICAL SYSTEMS (For 15 HP Kohler)...................................................................36 & 37
WIRING SCHEMATICS................................................................................................. 38 thru 41
HARDWARE BAGS ................................................................................................................... 42
ACCESSORIES AND ATTACHMENTS ..................................................................................... 44
MANUAL No. 06128
R. E. RIDER SERIES 22
2
WHEELS - FRONT
1
10
ASSEMBLY
5
9
6
2, 2A
3
12
7
4
4
11
ITEM
1
PART NO.
5-8943
2
3
4
5
6
7
8
9
10
11
12
7-3563
1-7146
1-1807
1-2234
1-4669
1-0935
1-1022
1-1032
3-1038
9-1516
1-0821
7
8
DESCRIPTION
ASSEMBLY, Front Tire & Rim (Complete)
(Includes Items 2, 3, 4, 5 & 6, )
TIRE, 11 x 4.00-4 (Kenda)
RIM (For 4.10/3.50 x 4 Tire)
BEARING, Ball
VALVE, Air (Snap-in)
FITTING Lube
WASHER, 3/4” I.D.
CAP, Hub
SEAL, Felt
CAP, Dust
PIN, Cotter 5/32 x 1" (2)
TUBE, Inner (For 4.10/3.50 x 4 Tire)
MANUAL No. 06128
3
WHEELS - REAR
LEFT HAND
14
11
12
13
9
RIGHT HAND
1
ASSEMBLY
2
13
15
8
10
6
7
5
3
MANUAL No. 06128
4
4
WHEELS - REAR
ITEM
PART NO.
DESCRIPTION
1
5-8951
ASSEMBLY, Rear Tire & Rim (Includes Items 2, 3 & 4) (28", 30” 33” Models)
2
7-3584
TIRE, 16-6.50 x 8 (33" Models)
3
1-7147
RIM, Extra Wide, (For 16/7.50 x 8 Tire) (33" Models)
4
1-2234
VALVE, Air (Snap-in)
5
1-2332
CLAMP, Right Hand (8, 10 & 13 HP)
--
1-4542
CLAMP, Right Hand (12, 14 & 15 HP)
6
9-1502
BOLT, 1/2-20 x 3/4" Lug (6)
7
3-1732
BOOT, Right Hand
8
1-1817
SEAL, Oil
9
4-0433
HUB, Rear Wheel R. H. (Weldment)
10
2-3895
CAP, Hub
11
2-3522
CAP, Hub (Left Hand)
12
4-0434
HUB, Rear Wheel L.H. (Weldment)
13
1-1201
NUT, 5/16-24 Hex Center Lock
14
1-1035
BOLT, 5/16-24 x 1-5/8" Tapered (Left Hand)
15
1-1013
BOLT, 5/16-24 x 2" Tapered (Right Hand)
MANUAL No. 06128
5
FRONT END, STEERING
2
38
1
45
37
39
3
36
23
22
4
32
35
24
19
5
20
21
33
29
18
34
27
31
7
10
28
8
26
20
11
41
9
10
31
25
40
17
12
12
10
12
13
15
6
16
31
12
6
30
14
30
MANUAL No. 06128
6
FRONT END, STEERING
43
42
44
ITEM
1
2
3
4
5
-6
7
8
9
10
11
12
13
-14
15
-16
17
-18
--
ITEM
19
20
21
22
23
24
25
26
27
28
PART NO. DESCRIPTION
5-8030
STEERING WHEEL (for 5/8”
shaft) (includes item 2)
2-3781
LOGO, Steering Wheel
1-3862
PIN, 1/4" x 1-1/2" Roll
3-8243
LATCH, Parking Brake
2-2449
CABLE, Clutch/Brake(54.32”)
(for 28” & 30” Decks)
7-4131
CABLE, Clutch (55” long)
(for 33” & 42” Decks)
9-0122
WASHER, 3/8 Flat (2)
1-1815
PAD, Clutch/Brake Pedal
1-0694
BUSHING, Nylon
4-7888
PEDAL, Clutch/Brake (weldment)
1-0986
BEARING, Nylon (4)
4-6232
SHAFT, Steering (weldment)
1-3321
BUSHING, Tie-Rod (4)
1-3023
TIE-ROD, Left Hand (7.41” long)
1-2541
TIE-ROD, Left Hand (9.91” long)
4-1687
KING-PIN Weldment, Left Hand
1-2933
TIE-ROD, R. H. (7.41” long)
1-2540
TIE-ROD, R. H. (9.91” long)
4-1688
KING-PIN, Weldment Right Hand
5-8040
WELDMENT, Front Axle, Narrow
(28” & 30” Deck)
5-9197
WELDMENT, Front Axle, Wide
(33” Deck)
1-4049
FOOT PAD, Short (2)
1-4048
FOOT PAD, Long (2)
PART NO.
1-5444
9-0183
4-6158
1-1714
2-3667
9-0296
9-1514
1-2867
2-2881
1-0776
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
1-0746
9-0365
1-0935
2-3671
2-8395
2-8332
9-0854
7-2648
3-4174
9-1495
9-0372
9-0753
9-0364
7-4560
9-0913
44
45
7-4561
7-4599
DESCRIPTION
SPRING, Parking Brake
WASHER, 21/32 I. Dia.(2)
BUSHING, Nylon (2)
PIN, Hair
FOAM COVER, Steering Shaft
PIN, 3/16 x 1" Cotter
WASHER, 3/8” Flat (2)
PIN, Hair (.125” Dia. Wire)
SPACER, 1/2" (5)
RING, 1/2” External Retaining
(Heavy Duty)
RING, 3/4” Ext. Retaining (2)
PIN, 1/8 x 3/4" Cotter (2)
WASHER, 5/8 Flat (6)
COVER, Steering Shaft
SPACER, Pivot
STUD, Shoulder (3/8-24 Thread)
NUT, 3/8-24 Hex Nyloc
CABLE, Brake (29” long)
CONNECTOR, Cable (2)
SCREW, 1/4-20 x 3/4", Gr. 5
PIN, 3/16" x 1-1/2" Cotter
PIN, 5/32” x 1” Cotter (2)
HOLDER, Wire- Bottle
SCREW, #10-24 x 1/2”
Hex Washer Self-Tap (2)
BOTTLE, Water
PLATE, Thrust
MANUAL No. 06128
7
MAIN CASE
19
39
49
38
53
2B
50
21
1
50
51
36
*
52
53
31
*
50
48
53
50
31
36
35
36
47
34
42
22
7
23
4C
5
30
10
31
35
4A
34
6
CONNECTS TO ITEM 15
ON PAGE 9
11
50
53
2A
50
53
29
13
38
39
9
12
33
8
21
19
29
3
* NOTE: The heads of these fasteners are located
32
underneath the main case.
29
37
MANUAL No. 06128
8
MAIN CASE
29
27
SPRING (2-6292)
PART OF ITEM 17
14
20
18
41
46
24
26
53
25
50
17
16
40
ITEM
1
-2A
2B
3
4A
4B
4C
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
27
45
44
43
ITEM
28
29
5-8044
WELDMENT, Main Case
5-9202*
WELDMENT, Main Case
3-0798
BUMPER, Rear (2)
3-6367
BUMPER (1-piece) (33” Deck)
3-7285
FENDER, Left Hand
3-6419*
GUIDE, Belt
1-7653
GUIDE, Belt (not shown)
3-6418**
GUIDE, Belt
4-7189
BRACKET, Drive Support
9-0595
BOLT, 5/16-18 X 3/4" Hex
Flange Lock, Grade 5 (2)
1-0153
CAP, Bumper (2)
9-0585
NUT, 5/16-18 Hex Fl. Lock (6)
1-0969
NUT, 5/16-24 Hex Flange Lock
2-3676
LINK, Shift (Long)
4-1384
ARM, Shift
3-3799
BRACE, Cross
1-1018
LINK, Shift (Short)
9-0196
NUT, 5/16-18 Hex, Gr. 5 or B
4-0598
ARM, Shift Handle (weldment)
1-0754
SPRING, Shift Handle
5-8763
ASSEMBLY, Shift Detent
(Incl. Spring, part no. 2-6292)
5-9212
HANDLE, Shift (weldment)
9-1503
HAIRPIN, 3/32 X 1-1/2" (2)
2-3656
GRIP, Shift Handle
3-4299
WING, Rear (2)
2-2509
BUSHING, Pilot
7-3735
BRACKET, Switch
9-0037
PIN, 3/32 x 3/4" Cotter
2-3914
PIN, 1/4 x 1-3/4" Tapered Clevis
1-9245
BUSHING, Nylon
3-1036
WASHER, Thrust (2)
30
31
32
33
34
35
36
37
38
39
40
-41
42
43
44
45
46
47
48
49
50
51
52
53
*331522KVE Model only
28
15
1-9246
BUSHING, Nylon (2)
9-0361
SCREW, 5/16-18 x 5/8" Self
Tap (14)
9-0981
SCREW, #10-32 x 1/4" Hex
Washer Self-Tap (2)
9-1296
WASHER, 5/16" Flat (4)
1-2652
CLIP, Wire
9-0391
WASHER, 5/16”Internal Tooth
Lock
9-0484
SCREW, 5/16-18 x 1-1/2" (4)
9-1513
SCREW, 5/16-24 x 1-1/2" Hex
Head Cap, Grade 5 (4)
1-1791
RETAINER, 5/16 Bolt (4)
9-0206
SCREW, 5/16-18 x 3/4" Cap
9-0793
SCREW, 5/16-18 X 3/4" Hex
Self-Tap (4)
2-8200
SWIVEL (2)
2-8989
COVER, Switch (series 19 & earlier)
7-3268
COVER, Solenoid (series 20 & later)
2-8990
COVER, Battery
9-1272
FASTENER, 1/4” Ratchet (7)
1-5761
BOLT, 5/16-18 Shoulder
7-3289
LEVER, Over-Ride
9-1595
WASHER, 7/16” Flat
9-1298
NUT, 5/16-18 Nyloc
2-2486
OIL DRAIN, Short
2-7972
ASSEMBLY, Oil Valve
7-4190
PLATE, Engine (Kohler engine)
9-1315
WASHER, 5/16” Split Lock (8)
7-7692
BOLT, M8-1.25 x 25mm, SelfTap (Kohler)
9-0238
SCREW, 5/16-24 x 1” Gr. 5 (4)
9-1297
NUT, 5/16-24 Hex, Grade 5 (8)
**3314522BVE Model only
MANUAL No. 06128
9
DIFFERENTIAL, R. H. FENDER
26
2A
24
2
25
1
4
6
34
7
6
5
23
22
9
10
32
21
8
27
28
3
11
14
15
12
13
29
27
30
31
33
20
28
16
19
18
35
MANUAL No. 06128
16
17
10
DIFFERENTIAL, R. H. FENDER
ITEM
1
2
2A
3
4
5
PART NO.
1-4401*
1-8822*
1-2296
1-0969
3-1079
3-8067
DESCRIPTION
COLLAR, Lock (Includes P.N. 9-0201, 5/16-18 x 5/16” Setscrew)
BALL BEARING, Axle (Right Hand Fender)
BEARING, Axle (Right Hand Fender) (standard bearing)
WASHER, Thrust
PLATE, Differential
6
7
8
9
10
2-2115
2-1127
1-1072
5-1584
1-0988
SPACER, Pinion (4)
GEARS, Differential Pinion (4)
WASHER, Thrust
ASSEMBLY, Drive Hex Tube
WASHER, Hex Nylon Splash (3)
11
12
13
14
15
1-0964
1-0941
2-1129
1-0965
2-1128
GEAR, 11 Teeth-10 Pitch
CHAIN, 46 Pitch (No. 35)
SPROCKET
RING, External Retaining
SPACER
16
17
18
19
20
1-2332
1-7083
1-1024
3-7279
2-8762
CLAMP, Boot (2)
BOOT, Oil Seal
PLUG, Oil Fill & Check
CASE, Transmission
GASKET, Transmission Case
21
-22
-23
24
25
3-7280
3-7957
2-1158
2-7644
4-7763
7-4431
5-7398
FENDER, Right Hand (standard fender) (1.62” hole)
FENDER, Right Hand (optional fender) (2.498” hole)
GEAR, 63 Teeth-10 Pitch
GEAR, 63 Teeth 10 Pitch (331522KVE Model only)
AXLE, Long (Includes Gear) (Use Only With Short Axle P.N. 5-7398)
SPACER
AXLE, Short (Includes Gear) (Use Only With Long Axle P.N. 4-7763)
26
27
28
29
30
1-2333
1-1156
1-1782
9-0395
9-0188
SCREW, 5/16-24 x 1-5/8" Hex Cap Special Lock (4)
O-RING, 5/16” (2)
WASHER, 5/16” Belleville (2)
WASHER, 5/16” External Tooth Lock
WASHER, 5/16” Flat
31
32
33
34
35
1-1042
9-0361
9-0362
3-2107
6-1017
BOLT, 5/16-24 x 2-5/8" Idler
SCREW, 5/16-18 x 5/8" Hex Washer Self-Tap (11)
SPACER, Short Axle
GREASE, Transmission (24 oz. Required)
---
6-0411
6-0662
KIT, Differential (Includes 2A & 3-7280 Fender)
KIT, Differential (Includes items 2 & 3-7957 Fender)
*Optional Ball Bearing may be used (requires use of 3-7957 fender
MANUAL No. 06128
11
CHAIN CASE, L. H. FENDER
1
ASSEMBLY
5
2
31
14
7
34
16
3
6
15
34
31
5
9
8
10
4
12
10
13
9
11
25
29
26
33
19
ASSEMBLY
28
27
25
17
23
21
20
ASSEMBLY
23
22
18
35
24
30
MANUAL No. 06128
12
CHAIN CASE, L. H. FENDER
32
37
36
ASSEMBLY
39
38
ITEM
1
PART NO.
5-2683
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
4-1136
2-8761
1-1121
1-0756
1-8963
1-0614
3-9778
1-0942
1-1086
4-0355
1-0941
9-0307
1-1024
2-2785
1-0776
5-9183
3-7285
5-2827
7-4184
1-3324
7-4500
7-4182
1-1070
1-2332
1-7084
1-1071
1-1072
9-1505
1-0969
1-9260
2-3447
1-2271
2-7981
6-1017
5-1451
3-7958
1-4624
1-4625
DESCRIPTION
ASSEMBLY, Chain Case (Includes items 2 thru
13, 15, 16, & 31 thru 35)
CASE, Sprocket
GASKET, Case Cover
WASHER, .640 I.D. Belleville (2)
BEARING, Ball (2)
SPROCKET & SHAFT
KEY, 1/8 x 5/8" Woodruff
COVER, Chain Case
BEARING, Needle (2)
WASHER, Nylon Thrust (2)
HUB & SPROCKET
CHAIN
SCREW, #10-24 x 5/8" Hex Washer Self-Tap (10)
PLUG, Oil Fill & Check
ROLLER
RING, 1/2” Heavy Duty External Retaining
ASSEMBLY, L. H. Fender & Bearing (Incl. items 18 & 19)
FENDER, Left Hand (1.628” I.D. hole)
ASSEMBLY, Axle Bearing (Incl. items 20 thru 23)
BEARING, Axle
FITTING, Lube (for 3/16” hole)
SEAL, Dust/Grease Axle
BEARING, DX (2)
ROD, Cross-Tie
CLAMP, Boot (2)
BOOT, Oil Seal
WASHER, Thrust Nylon
WASHER, Thrust
O-RING (2)
SPACER (used with optional ball bearing, item 38 only)
WASHER, Shim (As Required)
WASHER, Shim (6)
GREASE, Transmission (Use 2 oz. maximum)
ASS’Y, L. H. Fender & Ball Bearing (optional, incl. items 37-39)
FENDER, Left Hand (1.744” I.D. hole)
BALL BEARING, Left Hand Fender
COLLAR, Lock (Includes #9-0776 Setscrew 1/4-20 x 1/4")
(Used with ball bearing, item 38, only)
NOTES: 1- See Pages 14 & 15 For Illustration of brake lever assembly and related parts.
2- Item 36 may be substituted for item 17 if ball bearings are preferred.
MANUAL No. 06128
13
SMOOTH CLUTCH ASSEMBLY
14
30
3
32
2
29
31
29
27
6
33
24
19
15
25
1
26
28
17
5
18
12
21
11
4
13
16
10
8
22
34
23
21
17
16
20
7
9
18
See page 6, Item 40
MANUAL No. 06128
14
SMOOTH CLUTCH ASSEMBLY
NOTE:
Brake Return Replacement Kit (6-1197)
is made up of items 11 and 13.
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
PART NO.
5-3114
5-4243
5-3103
1-4523
3-2331
9-0585
5-2497
1-2313
9-0303
9-1294
7-2593
9-1504
7-2406
1-3885
4-6162
1-1048
1-1201
9-0238
9-1198
3-3291
1-1763
7-3733
9-0539
1-5464
9-0390
9-1630
4-7190
9-0037
1-4663
1-4664
9-0187
9-0196
9-0122
5-9068
DESCRIPTION
ASSEMBLY, Smooth Clutch (Includes Items 2 thru 6)
HUB, Driven Disc (assembly)
DISC, Driven (rubber tire bonded to rim)
WASHER, Thrust
PLATE, Drive Disc
NUT, 5/16-18 Hex Flange Lock (4)
ASSEMBLY, Brake Lever (Includes Brake Lining & Rivet)
RING, 3/8” External Retaining
NUT, 1/4-28 Hex Top Lock
WASHER, 1/4” Flat
SPACER
SCREW, 1/4-28 x 1" Hex Head Cap, Grade 5 (washer face)
SPRING, Brake Return
SPRING, Clutch Brake
LIFT, Yoke
BEARING, Yoke (2)
NUT, 5/16-24 Hex Center Lock (2)
SCREW, 5/16-24 x 1" Hex Head Cap, Grade 5 (2)
SCREW, 3/8-16 x 5/8" Hex Washer Self-Tap
COLLAR, Yoke
ARM, Yoke
STUD (3/8-24 thread)
WASHER, 3/8” Internal Tooth
NUT, 3/8-24 Hex, Grade 5 or B
BRACKET, Slide
PIN, 3/32 x 3/4” Cotter
SLIDE HALF (2)
BOLT, 5/16-18 Shoulder
WASHER, 5/16” Split Lock
WASHER, 3/8” SAE Flat (2)
ASSEMBLY, Leaf Spring
MANUAL No. 06128
15
CUTTING DECKS, DEFLECTORS
37
22
1
29
34
30
32
28
26
33
27
2
31
41
42
RAILS & LIFT ARMS
ASSEMBLY (See
Pages 18 and 19)
13
21
15
40
33
23
21
31
14
16
12
11
10
38
2
(30” Deck)
3
7
6
8
35
17
24
39 20
4
36
19
9
20
5
35
19
SILHOUETTE OF
SPINDLE ASS’Y.
(See Page 21 For
Parts Breakdown)
SILHOUETTE OF
BLADE, ITEM 46
9
17
44
25
46
45
18
43
NOTE: Blade part number appears
On blade.
NOTE: The 25”, 28” and 33” decks are round.
The 25” deck has no square rib on top.
MANUAL No. 06128
16
CUTTING DECKS, DEFLECTORS
ITEM
1
2
--3
-4
-5
6
7
8
9
10
10A
11
11A
12
12A
13
14
15
16
17
18
19
20
21
22
23
24
7-3434
COVER, Spindle
6-1970
DECK, 28” (Painted w/decals)
6-1971
6-1972
6-0480
KIT, Air Lift (25”, 28” & 33” Deck)
(incl. items 4 thru 7)
6-0735
KIT, Air Lift (30” Deck) (incl.
items 4 thru 7)
3-7723
AIR-LIFT (2) (25”, 33” Deck)
3-1724
AIR-LIFT (2) (30” Deck)
9-0228
SCREW, 5/16-24 x 11/16”
Machine (6)
9-0391
WASHER, 5/16” Internal
Tooth Lock (6)
9-0223
NUT, 5/16-24 Hex (6)
5-2555
DEFLECTOR, 28”/33” Deck Discharge
(includes items 9, 10, 11, 12, 14)
2-6831
DECAL, Danger
3-3780
HINGE, Deflector (16” long)
2-4569
HINGE, Deflector (8” long)
1-6341
SPRING, Hinge (use with 2-6234 Pin)
1-6428
SPRING, Hinge (use with 2-6846 Pin)
2-6234
PIN, Hinge ( L-shaped) (16-1/4” long)
2-6846
PIN, Hinge (straight) (8-7/8” long)
9-1070
2-6483
NUT, 1/4” Push (2)
9-0584
BOLT, 1/4-20 x 1/2” Hex Fl. Lock
5-2553
DEFLECTOR, 30” Discharge
(incl. items 9, 10A, 11A, 12A)
9-1296
9-0392
SCREW, 1/2-20 x 1” Hex
9-0509
WASHER, 1/2” Internal Tooth
Lock (2)
9-0559
NUT, 1/2-20 Hex Jam (2)
9-1508
BOLT, 5/16-18 x 3/4” Short
Neck Carriage, Grade 5 (2)
9-1016
SCREW, 1/4-20 x 5/8” Hex
Washer Self-Tap (4)
9-1510
BOLT, 5/16-18 x 1/2” Hex
Washer Self-Tap Gr. 5 (3)
9-1525
BOLT, 5/16-18 x 1/2” Hex
Flange Lock (2)
ITEM
25
26
27
28
29
30
31
32
33
34
35
36
37
-38
39
40
41
42
43
--44
-45
--46
--
9-0613
(9)
3-3570
BRACKET, Gage Wheel (Front)
(28” & 33” Decks)
9-1532
SCREW, 3/8-24 x 3-3/4” Hex
1-9190
WHEEL, Gage (3)
1-5272
SPACER (3)
9-1518
NUT, 3/8-24 Hex Nyloc (3)
3-3571
BRACKET, Gage Wheel (Rear)
(2) (28” & 33”Decks)
9-0731
BOLT, 5/16-18 x 1/2” Carriage
(6) for 28 & 33”, (8) for 30” Deck
9-1070
(8) for 28 & 33”, (10) for 30” Deck
9-1015
SCREW, 1/4-20 x 3-1/2” Hex Washer
Self-Tap (2)
9-0492
WING-NUT, 5/16-18 (2)
9-0612
BOLT, 3/8-16 x 3/4” Hex Flange
Lock (3)
1-6983
COVER, 28” Mulcher
1-6984
COVER, 33” Mulcher
9-0583
Grade 5 (2)
3-4025
BRACKET, Anti-Scalp, 30” R.H.
3-4026
BRACKET, Anti-Scalp, 30” L.H.
3-4743
BRACKET, Anti-Scalp, 30” L.H.
3-4760
BRACKET, Anti-Scalp, 30” R.H.
2-6453
BLADE, Ninja 28”
2-6565
BLADE, Ninja 30”
2-4741
BLADE, Ninja 33”
1-6980
BLADE, 28” Mulcher
1-6982
BLADE, 33” Mulcher
3-5635
28” BLADE (High Lift)
1-8069
30” BLADE
3-4168
33” BLADE (High Lift)
1-9515
28” BLADE
1-9523
33” BLADE
MANUAL No. 06128
17
RAILS, LIFT ARMS, CAM LIFT
1
2
1
2
11
10
9
3
35
3
5
6
10
12
7
24
23
13
14
25
4
8
40
26
38
15
18
16
14
22
28
39
20
27
31
19
17
29
30
28
37
32
33
21
36
CABLE, NO REVERSE
IN MOW (SEE PAGE 20,
ITEM 11)
26
34
MANUAL No. 06128
18
RAILS, LIFT ARMS, CAM LIFT
ITEM
PART NO.
DESCRIPTION
1
9-1503
HAIRPIN, 3/32” X 1-1/2” (2)
2
2-8200
SWIVEL (2)
3
2-8728
HOOK, Chain (2)
4
9-0223
NUT, 5/16-24 Hex (2)
5
9-0854
6
9-0122
WASHER, 3/8” Flat
7
3-4213
PIVOT, Leveling
8
5-9324
ARM, Rear Lift (weldment)
9
9-0483
SCREW, 3/8-24 X 1-3/4” Hex Head Cap Grade 5
10
3-2030
11
4-6155
LEVER, Height of Cut
12
9-0289
13
4-6159
SPRING, Lever
14
1-2068
RING, Blue (2)
15
3-1855
GUIDE, Belt
16
4-6163
SPRING, Assist (2)
17
3-1838
BRACE, Top
18
1-6122
ROD, Leveling
19
9-0361
SCREW, 5/16-18 x 5/8" Self-Tap
20
5-8969
ASSEMBLY, Clutch Plate
21
4-3848
RAIL, Deck Lift, Right Hand
22
7-3269
RAIL, Deck Lift, Left Hand
23
4-6157
DETENT, Height Adjust
24
9-0324
SCREW, 3/8-16 x 1" Hex Washer Self-Tap (2)
25
4-6217
DETENT, Spacer
26
9-1198
27
2-6420
GRIP, Height Adjustment Lever
28
1-2067
RING, Red (2)
29
3-2997
ARM, Front Lift
30
5-8041
ARM, Front Lift (Weldment)
31
9-0365
PIN, 1/8 x 3/4" Cotter
32
2-2717
ROD, Support (Front Lift Arm to Front End)
33
1-7847
SNAP RING, 7/16”
34
9-0858
SCREW, 5/16-18 X 1/2” Hex Washer Self-Tap (2)
35
7-1920
SPACER, Deck Lift (2)
36
9-2051
BOLT, #10-24 x 1” Flat Head Square Neck
37
9-1290
NUT, #10-24 Hex Nyloc
38
3-2243
ANCHOR
39
9-0233
SCREW, 5/16-24 x 3/4” Hex Head Cap, Grade 5 (2)
40
9-0391
WASHER, 5/16” Internal Tooth Lock (2)
MANUAL No. 06128
19
BLADE STOP PEDALS
6
7
11
9
7
2
12
13
1
3
10
8
5
4
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
PART NO.
7-3267
3-5669
1-5448
1-5495
1-5446
1-2063
9-0155
9-0250
9-0289
9-1584
7-3216
7-3217
9-1776
DESCRIPTION
PEDAL, Blade Stop Control
SPRING, Latching
SPRING, Pedal
BOLT, 3/8-24 Shoulder, Grade 5
BOLT, 3/8-24 x 9/16" Shoulder
WASHER, Cone 13/32” I. D.
NUT, 3/8-24 Hex, Grade B
NUT, 1/4-20 Hex Flange Lock, Grade 5
CABLE, No Reverse In Mow
CLIP, Cable
BOLT, 1/4-20 x 3/4” Square Neck Carriage, Grade 5
MANUAL No. 06128
20
SPINDLE
1
3
ASSEMBLY
2
6
5
NOTE: Spindle housing assembly,
Part no. 5-0696 includes
Items 4 and 5.
4
12
3
7
13
8
12
9
13
10
11
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
PART NO.
5-4531
1-2491
1-3313
4-0460
1-0817
4-4785
1-0935
1-4407
3-7751
4-4782
9-0356
9-0491
9-1939
DESCRIPTION
ASSEMBLY, Spindle Housing (Includes Items 2 Thru 13)
RING, 1.85” Internal Retaining (2)
BEARING, Spindle (2)
WELDMENT, Spindle Housing
FITTING, Lube (for 3/16” diameter hole)
SPINDLE, Rider (10.327” overall length)
WASHER, 3/4” Shim
WASHER, Spindle
HOLDER, Blade
SPACER, Blade Centering
SCREW, 1/2-20 x 1-1/4” Hex Head Cap, Grade 5 (2)
NUT, 1/2-20 Hex Jam (2)
MANUAL No. 06128
21
BELTS, BRAKES, INTERLOCK
2
18
1
6
3
35
4
19
36
24
38
7
12
5
9
26
23
37
24
*
8
29
28
30
25
10
22
6
21
14
20
14
19
11
7
24
15
13
31
39
32
17
8
14
*
33
13
16
SEE PAGE 18, ITEM 38
34
MANUAL No. 06128
22
27
BELTS, BRAKES, INTERLOCK
ITEM
PART NO.
1
4-3844
BELT, Drive (73.75” AA Section) (Note: part number appears on belt)
DESCRIPTION
2
7-4467
NUT, 3/4-16 Hex Jam, Grade 8
3
3-2027
WASHER, 49/64” I.D. x 1-1/2” O.D. Flat (2)
4
1-8781
PULLEY, Spindle
5
1-5290
HUB, Pulley
6
9-1299
NUT, 3/8-16 Nyloc (2)
7
2-9624
PULLEY, 4” Idler (2)
8
9-1497
SCREW, 3/8-16 x 1-1/2” Hex Head Cap, Grade 5 (2)
9
3-5728
BRACKET, Fixed Idler
10
3-6526
BRACE, Fixed Idler Bracket
11
9-0858
SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap (5)
12
4-6567
HANDLE, Blade Engage (Flip)
13
1-0740
RING, 2” External Retaining (2)
14
9-0037
PIN, 3/32 x 3/4” Cotter (3)
15
3-6521
SPRING, Extension, 4” x 1/2” Diameter
16
4-7787
ARM, Idler (weldment)
17
1-4314
SPACER
18
4-6874
GRIP, Handle
19
9-1514
20
3-5378
DRUM, Brake
21
1-4304
PIN, 1/4” x 1-5/8” Clevis
22
3-4852
BAND, Brake
23
9-0122
24
9-0055
25
4-6677
EYE-BOLT, 1/4-20 x 4”
26
4-6648
SPRING, Flip Handle
27
9-1974
PIN, 3/16 x 1” Clevis
28
5-9254
HANDLE, Blade Lever (ON-OFF) (weldment)
29
1-4168
SPRING, Blade Handle
30
1-2055
ROD, Idler
31
9-0299
SCREW, #10-32 x 1” Hex Washer Self-Tap
32
1-8524
SWITCH, Deck Interlock (NO)
33
3-8021
MOUNT, Handle/Switch
34
9-0362
35
9-0555
PIN, 3/32 x 1/2” Cotter
36
9-0761
NUT, 1/4-20 Hex Top Lock
37
1-4343
BUSHING
38
4-6782
SPRING
39
3-2111
RESTRICTOR, Belt
MANUAL No. 06128
23
DRIVE DISC ASSEMBLY
3
1
2
ITEM
PART NO.
DESCRIPTION
1
7-4187
WELDMENT, 5.25” O.D. Drive Disc (33" Models)
-
7-2658
WELDMENT, 5.75” O.D. Drive Disc (28”, 30” & 42” Models)
2
9-0132
SCREW, 3/8-16 x 3/8” Set (2)
3
1-0210
KEY, 1/4” Square x 2”
MANUAL No. 06128
24
FUEL TANK & OPERATORS SEAT
1
2
3
3A
8
13
7
6
6
5
6
10
6
14
10
4
11
9
12
ITEM
1
-2
-3
3A
4
-5
6
7
8
9
10
11
12
13
14
PART NO.
2-8595
2-8650
5-1905
5-2435
1-2515
1-9377
7-6272
1-2912
1-4359
1-2222
3-3377
9-1542
2-3191
1-3849
2-4507
9-1038
2-9211
7-7351
DESCRIPTION
SEAT, Operator (12, 14.5 & 15HP Models) (shown)
SEAT, Operator (9 & 10HP Models) (not shown)
ASSEMBLY, Fuel Tank (9 & 10HP Models) (Includes Item 3)
ASSEMBY, Fuel Tank with Gauge (12, 14.5 & 15HP Models) (Incl. Item 3A)
CAP, Fuel Tank
CAP, Fuel Tank (With Gauge)
HOSE, Fuel (8-1/2" Long) (Briggs & Stratton: 8HP thru 14HP)
HOSE, Fuel (12-1/2” Long) (Kohler Only!)
FILTER, Fuel (In-Line)
CLAMP, Fuel Line (4)
BRACKET, Fuel Tank (Rear)
SCREW, 5/16-18 x 5/8" Pan Head Self-Tap (Torx #T-40) (2)
KNOB, Seat Adjusting (2)
SPACER, 5/16 (2)
VALVE, Fuel Shut-Off (Accessory)
BOLT, 5/16-18 x 1/2" Hex Flange Lock w/Nylon Patch (2)
SWITCH, Seat (Normally Closed)
HOSE, Fuel (3-1/2” Long)
MANUAL No. 06128
25
ENGINES & EXHAUST MUFFLER
ENGINE H.P.
START TYPE
ENGINE MFGR.
MFGR. MODEL
MFGR. TYPE
9.0
RECOIL
BRIGGS & STRATTON
28B702
1154-E1
14.5
15.0
ELECTRIC
ELECTRIC
BRIGGS & STRATTON C.A.R.B.
KOHLER
287707
CV15ST
1235-E1
PS-41580
6
11
7
12
10
6
13
14
3
5
4
2
8
9
1
ITEM
PART NO.
DESCRIPTION
1
5-1996
MUFFLER (B&S 9-12 HP) (Includes items 8 & 9)
2
9-0206
SCREW, 5/16-18 x 3/4”Hex Head Cap, Grade 2 (2)
3
9-1814
SCREW, 1/4-20x1-1/4” Hex Head Cap
4
1-9358
MUFFLER (Kohler 15 HP)
5
7-4453
MUFFLER (B&S 14 HP)
6
1-3849
SPACER (2)
7
9-1065
8
1-9257
DEFLECTOR, Heat
9
2-3023
SCREW #8-18 x 3/8” Type AB Modified
10
9-0362
SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap
11
9-1495
SCREW, 1/4-20 x 3/4” Hex Head Cap, Grade 5
12
1-5352
GASKET, Muffler
13
9-1294
WASHER, 1/4” Flat
14
9-0052
WASHER, 1/4” Split Lock
MANUAL No. 06128
26
THROTTLE CONTROL
2
3
1
4
ITEM
PART NO.
DESCRIPTION
1
2-2751
CONTROL, Throttle (23.6” long) (Briggs Engines)
--
7-4320
CONTROL, Throttle (34.6” long) (Kohler Engine)
2
9-0539
3
3-3470
PLATE, Throttle Control
4
9-0913
SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx) (2)
MANUAL No. 06128
27
DECALS
3
2
1
5
6
7
4
9
8
ITEM
1
2
3
4
5
6
7
8
9
10
PART NO.
2-3996
2-3997
2-2991
7-1916
7-4481
2-6831
4-6218
2-3980
2-3982
2-9470
DESCRIPTION
DECAL, 28 Inch
DECAL, 30 Inch
DECAL, 33 Inch
DECAL, Snapper
DECAL, No Mow in Reverse
DECAL, Danger (CPSC)
DECAL, Height Cut
DECAL, Back-up Recoil
DECAL, OHV
DECAL, Patent Numbers
MANUAL No. 06128
10
28
DECALS
2
3
4
1
6
7
ITEM
1
2
3
4
5
6
7
PART NO.
4-6440
4-6720
1-5691
7-3335
2-9113
1-2358
1-6134
DESCRIPTION
DECAL, Safety Instructions
DECAL, Chute/Deflector Warning
DECAL, Battery Caution
DECAL, OPEI, Ride-On
DECAL, Caution, Fuel (English)
DECAL, Battery
DECAL, Caution Tag
5
MANUAL No. 06128
29
ELECTRICAL SYSTEMS
(For 9HP Briggs Recoil Start)
2
6
8
3
TO ITEM 9
5
TO ITEM 11
4
10
TO ITEM 1 (D, E, F)
H
TO ITEM
1 (A)
G
11
7
1
TO ITEM 3
12
G
9
G. MAGNETO
SHORTING
BLOCK
MAGNETO
SHORTING
BLOCK
H
(SEE INSET)
H. ENGINE
GROUND
MANUAL No. 06128
30
ELECTRICAL SYSTEMS
(For 9HP Briggs Recoil Start)
ITEM
PART NO.
DESCRIPTION
1
2-8606INTERLOCK, Module
2
2-8386HARNESS, Deck Interlock
3
1-8524SWITCH, Deck Interlock (NO)
4
9-0880WASHER, 5/8 Internal Tooth Lock
5
1-5438NUT, 5/8-32 Hex
6
1-1138KEY, Switch (2)
7
7-3714HARNESS, Ground (Recoil Start)
8
1-2080TIE, 7" Long Cable (3)
9
2-9211SWITCH, Seat (NC)
10
1-7817SWITCH, Ignition (2-Pole) (Recoil Start)
11
2-2886SWITCH, Traction Operator’s Presence (NC/NO)
12
2-8607HARNESS, Operator’s Presence Control
MANUAL No. 06128
31
ELECTRICAL SYSTEMS
(For 10 & 12 HP BRIGGS)
8
I
J
TO ITEM 8
24
7
23
9
TO ITEM 16
TO ITEM 26
19
10
H
H
TO ITEM 6
(D, E, F)
G
25
24
TO ITEM
6 (A)
TO ITEM 11
3
L
16
TO ITEM 4
4
14
26
13
L
K
20
21
12
5
G. MAGNETO SHORTING
BLOCK (See Inset,
Page 33)
11
L
2
M
15
L
18
6
H. ENGINE
GROUND
G
H
I. ALTERNATOR
CHARGING WIRE
MANUAL No. 06128
J. STARTER
TERM INAL
K
17
M
TO ITEM 5
22
32
ELECTRICAL SYSTEMS
(For 10 & 12 HP BRIGGS)
ITEM
1
2
3
4
5
-6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
PART NO.
6-0753
1-8817
2-2788
7-3715
1-6168
1-6169
2-8606
2-8386
1-8524
1-2444
1-9326
7-3797
9-0880
1-5438
1-1138
9-0539
2-2886
9-1576
9-0053
2-7172
2-8027
2-8607
9-1576
1-2080
9-0372
1-4451
2-9211
DESCRIPTION
KIT, 12V Dry Charge Battery
SOLENOID
HARNESS, Starter Wiring (Briggs)
HARNESS, Ignition Wiring (Briggs)
HOLDER, Fuse (Includes Fuse)
FUSE (10 AMP)
INTERLOCK Module (Briggs)
HARNESS, (Deck Interlock Wiring)
COVER, Battery Cable
CABLE, Positive (Red)
SWITCH, Ignition (Used With Electric Start)
WASHER, 5/8” Internal Tooth Lock
NUT, 5/8-32 Hex
KEY, Switch (2)
SWITCH, Operator Presence Control (OPC) Traction (NC/NO)
NUT, 1/4-20 Hex, Grade 5 or B (4)
SCREW, 1/4-20 x 5/8" Hex Head Cap, Grade 5 (2)
CABLE, Negative
HARNESS, Operator Presence Control Wire
TIE, 7" Long Cable (2)
NUT, 1/4-20 Hex Center Lock, Grade 5 or B (2)
TIE, 2" Long Cable
SWITCH, Seat (NC)
MAGNETO
SHORTING
BLOCK
MANUAL No. 06128
33
ELECTRICAL SYSTEMS
(For 14.5 HP BRIGGS)
25
27
23
7
TO ITEM 8
9
24
8
TO ITEM 27
I
19
TO ITEM 16
J
26
26
10
H
H
G
3
24
TO ITEM 6
(D, E,
20
1
TO ITEM
6 (A)
14
TO ITEM 11
L
TO ITEM 4
16
13
4
12
21
K
5
L
6
11
H
G. MAGNETO SHORTING
BLOCK (See Inset,
Page 35)
L
2
M
15
L
H. ENGINE
GROUND
18
17
N
I. ALTERNATOR
CHARGING WIRE
J. STARTER
TERM INAL
M
K
TO CARBURETOR SOLENOID
TO ITEM 5
22
MANUAL No. 06128
34
ELECTRICAL SYSTEMS
(For 14.5 HP BRIGGS)
ITEM
1
2
3
4
5
-6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
PART NO.
6-0753
1-8817
2-2788
7-4406
1-6168
1-6169
2-8606
2-8386
1-8524
1-2444
1-9326
2-6343
9-0880
1-5438
1-1138
9-0539
2-2886
9-1576
9-0053
2-7172
2-8027
2-8675
9-1576
1-2080
9-0372
1-4451
1-2485
2-9211
DESCRIPTION
SOLENOID
HARNESS, Starter Wiring (Briggs)
HARNESS, Ignition Wiring (Briggs)
FUSE (10 AMP)
INTERLOCK Module (Briggs)
CABLE, Positive, 17” long (Red)
SWITCH, Ignition-Afterfire Solenoid
NUT, 5/8-32 Hex
KEY, Switch (2)
SWITCH, Operator Presence Control (OPC) Traction (NC/NO)
CABLE, Negative (15”)
TIE, 2” Long Cable
RETAINER, 1/4” Bolt (2)
SWITCH, Seat (NC)
MAGNETO
SHORTING
BLOCK
MANUAL No. 06128
35
ELECTRICAL SYSTEMS
(For 15 HP KOHLER)
24
19
25
9
26
26
TO ITEM 27
27
TO ITEM 8
7
TO ITEM 16
10
23
TO ITEM 4
I
24
H
TO ITEM 6
(D, E, F)
TO ITEM 11
20
1
TO ITEM
6 (A)
16
L
G
6
J
3
14
4
5
13
L
12
11
21
H. ENGINE
GROUND
I.
BATTERY GROUND
(See Inset, Page 37)
J. STARTER
TERMINAL
K
K
H
22
L 18
15
L
G. ELECTRONIC CONTROL UNIT
M
2
ENGINE
MOUNTING
PLATE
MANUAL No. 06128
17
M
TO ITEM 5
8
36
ELECTRICAL SYSTEMS
(For 15 HP KOHLER)
ITEM
1
2
3
4
5
-6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
PART NO.
6-0753
1-8817
1-9321
7-4405
1-6168
1-6169
2-8606
2-8386
1-8524
1-2444
1-9326
7-3797
9-0880
1-5438
1-1138
9-0539
2-2886
9-1576
9-0053
2-7172
2-8027
2-8678
9-1576
1-2080
9-0372
1-4451
1-2485
2-9211
DESCRIPTION
SOLENOID
HARNESS, Starter Wiring (Kohler)
HARNESS, Ignition Wiring (15HP Kohler)
FUSE (10 AMP)
INTERLOCK Module
CABLE, Positive (Red) (17” Long)
SWITCH, Ignition (Used With Electric Start)
NUT, 5/8-32 Hex
KEY, Switch (2)
SWITCH, Operator Presence Control (OPC)Traction (NC/NO)
CABLE, Negative (15”)
TIE, 2” Long Cable
RETAINER, 1/4” Bolt (2)
SWITCH, Seat (NC)
BATTERY GROUND SCREW
FRONT VIEW OF ENGINE
MANUAL No. 06128
37
WIRING SCHEMATICS
MANUAL No. 06128
38
WIRING SCHEMATICS
MANUAL No. 06128
39
WIRING SCHEMATICS
WIRING SCHEMATIC FOR 14.5 HP (Briggs Engine)
MANUAL No. 06128
40
WIRING SCHEMATICS
MANUAL No. 06128
41
HARDWARE BAGS
ITEM
-1
PART NO.
6-1872
1-1024
2
3
4
5
6
7
8
9
10
11
12
1-3321
1-3849
1-3862
2-3191
2-3667
2-3671
2-8395
2-9211
9-0372
9-1038
9-1516
13
14
15
9-0296
9-0122
9-0913
ITEM
-1
PART NO.
6-3185
1-1024
2
3
4
5
6
7
8
9
10
11
1-3321
1-3849
1-3862
2-3191
2-3667
2-3671
2-9211
9-0372
9-1038
9-1516
12
13
14
9-0296
9-0122
9-0913
DESCRIPTION
LOCATION
HARDWARE BAG (includes items listed below)
PLUG, Oil Fill & Check (2) ................................................ page 11, item 18 &
page 13, item 14
BUSHING, Tie Rod (2)...................................................... page 7, item 12
SPACER, 21/64” (2) .......................................................... page 25, item 10
PIN, 1/4 x 1-1/2” Roll ......................................................... page 6, item 3
KNOB, Three Prong (2)..................................................... page 25, item 9
FOAM COVER, Steering Shaft ......................................... page 6, item 23
COVER, Steering Shaft..................................................... page 7, item 32
SPACER, Pivot (2) ............................................................ page 7, item 33
SEAT SWITCH, Quick Mount ........................................... page 25, item 13
NUT, 1/4-20 Hex Center Lock (2) ..................................... pg. 32 & 34, item 24
BOLT, 5/16-18 x 1/2” Hex Flange Lock (2) ....................... page 25, item 12
PIN, 5/32 x 1” Cotter (2) .................................................... page 3, item 11
page 7, item 41
PIN, 3/16 x 1” Cotter ......................................................... page 7, item 24
WASHER, 3/8” Flat (2)...................................................... page 7, item 6
SCREW, #10-24 x 1/2” Hex (Torx) (2) .............................. page 7, item 43
DESCRIPTION
LOCATION
HARDWARE BAG (includes items listed below)
PLUG, Oil Fill & Check (2) ................................................ page 11, item 18 &
page 13, item 14
BUSHING, Tie Rod (2)...................................................... page 7, item 12
SPACER, 21/64” (2) .......................................................... page 25, item 10
PIN, 1/4 x 1-1/2” Roll ......................................................... page 6, item 3
KNOB, Three Prong (2)..................................................... page 25, item 9
FOAM COVER, Steering Shaft ......................................... page 6, item 23
COVER, Steering Shaft..................................................... page 7, item 32
SEAT SWITCH, Quick Mount ........................................... page 25, item 13
NUT, 1/4-20 Hex Center Lock (2) ..................................... pg. 32 & 34 item 24
BOLT, 5/16-18 x 1/2” Hex Flange Lock (2) ....................... page 25, item 12
PIN, 5/32 x 1” Cotter (2) .................................................... page 3, item 11 &
page 7, item 41
PIN, 3/16 x 1” Cotter ......................................................... page 7, item 24
WASHER, 3/8” Flat (2)...................................................... page 7, item 6
SCREW, #10-24 x 1/2” Hex (Torx) (2) .............................. page 7, item 43
MANUAL No. 06128
42
NOTES
43
Parts Manual for
REAR ENGINE RIDER
SERIES 22
SNAPPER REAR ENGINE RIDER ACCESSORIES*
PART NO.
6-0517 .............................
6-0601 .............................
6-0325 .............................
6-0697 .............................
6-1400 .............................
6-0794 .............................
6-0941 .............................
6-0942 .............................
6-0943 .............................
6-0944 .............................
6-0946 .............................
6-1414 .............................
6-0945 .............................
6-3125 .............................
6-0947 .............................
6-0948 .............................
6-0964 .............................
6-1190 .............................
6-0959 .............................
6-0357 .............................
6-0358 .............................
6-1823.............................
6-1049 .............................
6-1253 .............................
6-1254 .............................
6-1255 .............................
6-1220 .............................
6-1910.............................
6-1911.............................
6-1912.............................
6-1913.............................
6-1914.............................
6-1915.............................
6-1916.............................
DESCRIPTION OF KIT
MODELS USED ON
Wheel Weight (8” Wheels) ................................... All Rear Engine Riders
Smooth Start Clutch.............................................. All Rear Engine Riders
Drive Disc Puller ................................................... All RER Aluminum Drive Discs
Dump Cart............................................................. All Rear Engine Riders
Gauge Wheel........................................................ All 28” & 33” Deck Rear Engine Riders
Gauge Wheel........................................................ All 41” & 42” Deck Rear Engine Riders
Single Bag Catcher ............................................... All 25” Deck Rear Engine Riders
Single Bag Catcher ............................................... All 26” & 30” Deck Rear Engine Riders
Twin Bag Catcher.................................................. All 28” & 33” Deck Rear Engine Riders
Twin Bag Catcher.................................................. European 28” & 33” Rear Engine Riders
Twin Bag Catcher.................................................. All 41” & 42” Deck Rear Engine Riders
Clamshell Catcher................................................. All 28” & 33” Deck Rear Engine Riders
Bag-N-Wagon ....................................................... All 28” & 33” Deck Rear Engine Riders
Thatcherizer .......................................................... All Series 7 & Newer Riders
Wagon Cover........................................................ All 28” & 33” Deck Rear Engine Riders
Weight (Front)....................................................... All Series 7 & Newer Riders
Dozer Blade (36” Blade) ....................................... All Rear Engine Riders
Tire Chains (Tires-16 x 6.50-8) ............................. All Rear Engine Riders
Tire Chains (Tires-16 x 4.80-8) ............................. All Rear Engine Riders
Ninja Recycling (Cover)........................................ All 25” Deck Rear Engine Riders
Recycling (Cover) ................................................. All 25” Deck Rear Engine Riders
Ninja Recycling (Cover) ........................................ All 28” Deck Rear Engine Riders
Ninja Recycling (Cover) ........................................ All 41” & 42” Deck Rear Engine Riders
Utility Trailer (10 Cubic Feet)
Spiker Aerator (36”)
Dethatcher (40”)
*For illustrated parts lists see manual #0-6084.
Lawn Sweeper (36”)
Dethatcher Kit (For 36” Sweeper)
Poly Lawn Roller (24” & 36”)
Broadcast Spreader (3.5 Feet)
COPYRIGHT © 2002
SNAPPER INC.
ALL RIGHTS RESERVED
MANUAL No. 06128
(Rev. 1, 06/30/02)
44
Printed in U.S.A.

Parts Manual for REAR ENGINE RIDER SERIES 22

Transcription

Similar documents

Bildung und Erziehung im Kindergarten - Lernwerkstatt Kita

Parts Manual

Snapper Series 23 Manual

Parts Manual for REAR ENGINE RIDER ACCESSORIES