Western Instrument Company

Western Instrument Company
A Division of Colorado Serum Company
Product Catalog
2009
Western Instrument Company
In 1959, Colorado Serum Company acquired the assets of the well-known Western Instrument & Manufacturing Company
and relocated the new division’s operations to the main facility in Denver. Western Instrument & Manufacturing Company,
originally founded in 1920 and based in Chicago, was one of only several early-era veterinary instrument manufacturing
companies in the United States. Its industry-wide reputation for quality and customer satisfaction made it a fitting addition
to Colorado Serum Company.
Colorado Serum Company got its start in the early 1900’s when Hog Cholera disease was decimating the swine industry
in the United States. Hog Cholera was eventually eradicated from the United States and throughout the decades,
Colorado Serum Company expanded its product lines to include a full range of large animal biologicals, veterinary
instruments, veterinary diagnostics, laboratory reagents, and specialty products.
Today, facilities now cover 22 acres in Denver and contain all manufacturing and administrative offices. Products are
marketed and distributed by numerous animal health companies across the globe.
Colorado Serum Company is proud to be a 4th generation family-owned company – riding the edge of current science
while continuing the valued and time honored traditions of personal and responsive service.
Colorado Serum Company Milestones
Introduced livestock Anthrax Spore Vaccine
Only remaining manufacturer in the US today
Dr. Joseph Huff establishes
Colorado Serum Company
Created Professional Biological Company
as a subsidiary
1923
1950’s
1940’s
First to introduce
Crystal Violet Hog Cholera Vaccine
1960’s
First to combine respiratory
cattle vaccines
Added and relocated
Western Instrument Company
Western Instrument & Manufacturing Company
- Chicago circa 1930
First company licensed for
Lepto-5
1970’s
1980’s & 90’s
Introduced the first concentrated & purified
West Nile Virus Antibody
2004
Introduced
Brucella Abortus RB-51 vaccine
Only manufacturer of
Ovine Chlamydia vaccine in the US
Today
Continuing research & development
for emerging diseases and
product improvement
WESTERN INSTRUMENT COMPANY has a long and rich history. Beginning in 1909 the company
was located in downtown Chicago, manufacturing a wide range of veterinary instruments in its
5-story building.
In 1960 the company was purchased by COLORADO SERUM COMPANY and moved to Denver,
CO. Colorado Serum Company is a 4th generation family owned company that makes veterinary
biologicals, instruments and reagents.
The veterinary instrument market has seen marked changes over the past years. Many new and
useful instruments have been designed and marketed. Also, there has been the introduction
of foreign-made products which duplicate the design of U.S. manufacturers at a substantially
reduced cost. We have evaluated many of these, and even offered some in our catalog along
with instruments we produce. Over time we have come to realize that the supply of these foreign
products is unreliable in quality and availability, so we have made the decision to move toward only
offering items which are Made in the USA.
We are pleased to announce that in 2006, we entered into a joint-marketing arrangement with
STONE MANUFACTURING of Kansas City, another family-owned U.S. manufacturer. We have
discovered that together we offer a complete line of high quality, U.S. manufactured veterinary
instruments. You will find in our catalog selected items made by Stone, and likewise some of our
items are shown in their catalog. Both companies retain their ownership and independence, but
share the same philosophies and values.
Feel free to visit our web-site, www.westerninstrument.com, or just give us a call at 800-525-2065.
We have real people who answer the phone.
WESTERN INSTRUMENT COMPANY div. of
COLORADO SERUM COMPANY
By:
Joseph N. Huff, President
Table of Contents
A
Adjustable Milk Tube 11
B
Bailey Ram/Billy Ejaculator Balling Guns Band Castrators
Batteries (Ejaculator) Batteries (Mega-Therm) Batteries (Stinger Stock Prod) Blades (Dental Float) Bovine Eye Spoon Bulb Dose Syringe Bull Leads C
Calf Balling Gun Calf Weaners
Calf Puller
Carbide Float Blades Castrating Kit (Stress Saver) Castrating Knife Castrating Rings
Cattle Prod (Stinger) Chains (O.B.) Chain Handles Clear Plastic Tubing Clear Head Balling Guns Combs
Crown Calf Weaners
D
Dehorners Dental Floats Dental Wedge Dial-O-Matic Syringes Dose Pipes Dose Syringes E
Ejaculator – Bailey’s (Ram/Billy) Equine Balling Gun Ear Notchers
Ear Punch
F
Fischer Combination Float Flex Cane
Float Blades Floats (Dental) Frick Stomach Tube Funnel I.V. Set (Rubber) G
Grooming Combs
33-34
H
3
11-12
30
3
4
2
20
4
5
9
12
27
25-26
20
10
8
30
2
13
13
15
12
33-34
27
8-9, 28
19-20
18
7
5
6
Henderson Castrator
Hog Holders
Hoof Trimmer
House’s Dental Float
Hug’s Tumor Extractor I
Incisor Bars (McPherson)
Injection Pumps
I.V. Funnel Set (Rubber)
Iowa Hog Holder 20
31
20
19-20
16
17
19
16
17
18
K
Kant Suk Calf Weaners
Knuckle Saver Dehorner
Koroseal Stomach Tubing
27
28
15
L
Latex Tubing L.C.F. Mega-Therm
Leads (Bull) Luer Lock Adapter
M
Magnets
McPherson Mouth Speculum
Mega-Therm
Metal Head Balling Gun
Milk Tubes
Milkers
Mini Hog Holder Multiple Dose Balling Gun
N
Needle – Transfer Newberry Knife
3
11
21
22
29
18
31
19
11
15
4
9
7
30
19
4
11
11
32
18
12
5
29
O
O.B. Chains
O.B. Chain Handles
O.B. Snares (Bovine/Porcine)
O.B. Wire Saw O.B. Wire Saw Handles
13
13, 26
14
14
14
P
Pistol Grip Syringes Plastic Tubing (Clear)
Power Pull Calf Puller
Premium Hog Holder
7
15
26
18
R
Ram/Billy Ejaculator (Bailey’s)
Rasp & File Float Blade Ratch-a-Pull Calf Puller
3
20
25
S
Sorex Syringes
Safety Ball Dose Pipe
Sheep Crook & Handle
Sorting Stick
Stinger Stock Prod Stock Prod (Stinger)
Stomach Pumps Stomach Tubing Stomach Tube (Frick) Stomach Magnet
Stress Saver Castrating Kit
Syringes
T
Teat Slitters
Teat Tumor Extractor (Hug’s)
Tooth Nippers
Thermometer
Transfer Needles Trimmer (hoof)
Tube Dehorners Tubing
Tumor Extractor (Hug’s)
Twitches
U
Udderly EZ Milker
W
Weaners
Wire Saws
Wire Saw Handles
23-24
5
17
31
2
2
16
15
16
30
10
7,23-24
11
11
22
13
5
31
9
15
11
10
32
27
14
14
MADE IN THE USA
#21300 - Pressure Activated
#21303 - Push Button Activated
#21310 - White Lightning Rechargeable
with battery charger
#21360 - 9 Volt Industrial Alkaline
Batteries (2-Pack)
#21314 - White Lightning Replacement
Battery Pack
SPECIFICATION: Streamlined design and machined from solid bar stock nylon.
Manufactured and assembled to be impact and moisture resistant, well-balanced and
user-friendly. New power boosting circuitry requires only two 9-Volt batteries. #21300
Pressure Activated – innovative internal switch is machined from solid brass and
activates when pressure is applied to livestock; increasing battery life and reducing hand
fatigue. #21303 Push Button Activated – activated by an external rubber coated push
button switch. #21310 White Lightning Rechargeable - powered by a long-lasting
rechargeable battery pack. The flexible shafts are 12, 24, and 36-inch lengths. The
power unit is 12 ½ inches in length. The V-tip brass probes are 1 ½” from center to center.
The V-tip design directs the mechanical force to the reinforced tip and reduces the force
being applied to the outside, as in traditional u-shaped probe designs, resulting in higher
and more reliable long–term performance. The capacitor discharge of the power unit
provides consistent discharge power regardless of battery strength. Units feature a fast
electrical bleed-off design eliminating residual shock in shaft. A leather band is attached
to the end for convenient storage.
OBJECTIVE: The stock prod is an effective and humane instrument used to efficiently
move animals when they cannot be urged by any other probing measure. The shock will
stimulate the animal on contact and does not cause any harm if used judiciously.
APPLICATION: #21300 Pressure Activated – Place the two brass probe tips against
the animal and push the assembly (approximately 1/8” ) to activate the electrical
discharge. #21303 Push Button Activated & #21310 White Lightning Rechargeable
– Unit will activate only when button is pressed. Once the animal has reacted, pull the
prod away to avoid any contact. Both brass probe tips must be on the animal to ensure
an electrical discharge. Keep the internal brass mechanism area clean with an alcohol
wipe to maintain consistent contact. If mud, manure, etc… builds up between the probe
tips, clean off and continue use. If not kept clean, this could cause a direct short and the
electrical charge will not emit from the probe tips for proper operation. Use caution at
all times and keep away from children, as this is not a toy and should be used only on
livestock.
#21312 - White Lightning Battery Charger
#21340 - 36” Polycarbonate Shaft
#21335 - 24” Polycarbonate Shaft
#21320 - 12” Polycarbonate Shaft
Power units are sold without SHAFTS OR batteries
SPECIFICATION: This instrument represents a new generation of electronic ejaculators
for rams and bucks. The unit is light weight (2 lbs.), battery-operated, enclosed in a
rugged die-cast case, and designed for one hand operation.
THE BAILEY EJACULATOR
MOD 2
APPLICATION: The unit is simple to use. After inserting the probe approximately 4
inches into rectum, push the switch on for 4 seconds, off for 4 seconds. Repeat the
cycle. Ejaculation should be achieved after only a few cycles.
While the switch is depressed, the red light will illuminate, indicating operation of the unit
as well as battery condition. If the light does not appear, or appears only dimly, replace
the batteries. A set of fresh batteries should provide at least 100 ejaculations, and
perhaps as high as 300.
MADE IN THE USA
Voltage Switch: Switch inside case should be set at “LO” when instrument is used on
goats, or for decreased stimulation when used on sheep.
The outside of the instrument may be cleaned with normal detergents. The unit is entirely
sealed except the cover plate – water or other matter should not be allowed to enter.
WARNINGS: Western Instrument Company makes no warranties, expressed or implied
with the Bailey Ejaculator. Any defective parts will be replaced.
#21160 - Complete Bailey Ejaculator
MOD 2 (including batteries)
#21165 - Replacement Battery
for MOD 2 # 21160 (2 required)
For veterinary use only - should be used by or under the direction of a veterinarian.
PROBE 7”
2 3/8”
momentary
switch
4 3/8”
RED LIGHT
(l.e.d.)
2 - 6 Volt
batteries
or equivalent
power voltage
switch
“Lo” for goats or decreased
stimulation in sheep
Any of the following batteries will power #21160 MOD 2:
- 6 Volt Lithium
- Duracell
28L
- Eveready
L544
- Radio Shack 23-266
L.C.F. MEGA-THERM
MADE IN THE USA
#21200 - LCF Mega-Therm
#21205 - Eye Spoon
SPECIFICATION: Some types of cancer can be successfully treated by heating the
tumor tissue above normal body temperatures. The cancer cells are usually more
susceptible to damage than normal body cells and so are preferentially killed. Treatment
duration and temperature are important. Heating for about 30 seconds at 50º C (122º F)
appears to have the same beneficial effect on some tumors as does heating for 1 hour at
43º C (about 109º F).
This instrument employs a Localized Current Field (LCF) generating a two-megahertz
radio frequency, to precisely heat tissue around the probes. The principle of LCF is
passage of RF electric current between two electrodes. The amount of tumor between
the electrodes increases the resistance component of the current, causing thermal
energy dissipation. Heat is generated within the tissue and is not the result of thermal
conduction from the electrodes. Temperature is determined by a thermistor located
within one of the electrodes, which in turn results in modulation of the output power level
of the RF generator to maintain temperature. The instrument reaches and maintains a
temperature of up to 50º C (122º F), penetrating approximately 3-5mm. This temperature
has been found to alter the nature of cancerous tissue, with minimal damage to
surrounding normal tissue, provoking the animal’s own defensive mechanisms to cause
the tumor to recede and disappear. This approach to cancer treatment is not necessarily
new, but never before has the equipment been available economically to the veterinary
field.
The instrument is designed as a rugged, portable field model. Temperature for treatment
is factory set at 50° C and cannot be changed. The three-position switch changes only
the power and not the temperature. The circuitry of the instrument is designed so that
heating will not take place unless the probes are in contact with tissue (or other
conductive material) and the switch is in either “Hi” or “Lo” position. When these two
conditions are met a high-frequency steady tone will be heard from the instrument panel.
This indicates that heating is taking place. It may be necessary to apply a small amount
of physiological saline solution to the area of treatment. This is necessary when tumors
are somewhat dry and therefore non-conducting.
Battery as supplied is fully charged. A fully charged battery may be expected to provide
approximately 60 treatments. Replacement gel-cells may be obtained from Western
Instrument Company. Batteries should be recharged as soon as possible after use and
not stored in a discharged condition. All parts should be kept clean and dry. Do not use
this model with any AC to DC power converter. The internal circuitry of the unit generates
considerable heat. The all aluminum, cast handle is designed as a heat-sink to dissipate
heat from the internal circuitry. This is normal, but should not be uncomfortable to the
user’s hand. In extended use, a glove may be worn for operator comfort.
#21210 - Probe Tip - Regular
EYE SPOON (Included)
For use in treatment of Bovine Cancer Eye. The spoon will immobilize the eyeball and
enable rotation of the eyeball for accessible tumor exposure.
OBJECTIVE: This treatment has proven useful for eye tumors in cattle and horses;
warts and sarcoids in horses; anal tumors in dogs; ringworm and dermatological
conditions in horses, dogs, and cats. Consult published literature for detailed usages and
procedures before using these instruments.
NOTE: Technical paper on the use of LCF Megatherm is available from Western
Instrument Company
#21202 - Rechargeable Battery Pack
For veterinary use only - should be used by or under the direction of a veterinarian.
SPECIFICATION: The styles listed below are manufactured out of nickel-plated brass
tubing with either a safety ball or a finished smooth end. The safety ball styles are
designed in a precautionary manner to prevent potential mouth or throat injury.
DOSE SYRINGE PIPES
** Dose pipes are not packaged with dose syringes and must be ordered as a separate
item.
OBJECTIVE: To aid in the oral administration of medical or irrigation procedures when
attached to a dose syringe.
MADE IN THE USA
APPLICATION: See specifications on dose syringes.
#22150 - 6” LENGTH 3/8” O.D. 1/4” I.D.
#22016 - Dose Pipe with 1” Safty Ball
#22180 - Dose Pipe Adaptor
SPECIFICATION: A 16-gauge, stainless steel, double-pointed needle with an overall
length of 1 ¼”. The needles on either side of the hub are ½” length. The hub is chromeplated brass, ¼” square. The transfer needles are packaged twelve per container, and
can be autoclaved.
TRANSFER NEEDLE
OBJECTIVE: To aid in the rehydration of a desiccated (dried) vaccine, or transfer liquid
from one bottle to another via a vacuum process.
APPLICATION: Autoclave, or sterilize, the double-pointed needle. Insert one needle
end into an upright bottle of sterile solution (diluent). Place the opposite needle end
into an inverted vaccine bottle. Grasping both bottles, reverse the bottles and allow the
vacuum from the vaccine bottle to pull the liquid into the vaccine for rehydration and use.
MADE IN THE USA
#22026
SPECIFICATION: A two (2) fluid ounce bulb dose syringe and irrigator. The bulb is a
2 ¼” diameter soft durable rubber for easy operation. The overall length is 8 ½”; the
aluminum fabricated pipe is 6 3/8” long, 3/8” O.D., 1/4” I.D. The pipe or bulb can be
replaced if damaged or worn.
bulb dose syringe
OBJECTIVE: To be used for administration of fluid, irrigating or excessive fluid removal
during medical procedures.
APPLICATION: Squeeze the bulb to create a vacuum, insert the open end of the pipe
into the fluid solution and slowly release the bulb to allow it to fill to the desired dosage.
To administer liquid solution, squeeze the bulb and release as needed to stop the flow.
MADE IN THE USA
For removal of excess fluids, repeat the described instructions as aforementioned.
Clean well after use with soap and water, and let dry. The instrument may be autoclaved
if necessary.
#22170
dose syringes
SPECIFICATION: All of the dose syringe barrels are nickel-plated brass tubing, the
plunger/plunger rods are nickel-plated solid brass, the finger rings/thumb rings/head caps
are die-cast zinc. Plunger O-Rings are of high-quality rubber with mineral oil lubricant
applied.
Plunger rods and barrels vary in size on all the instruments, see specifications below for
details. The plunger rods are calibrated for fluid ounce dosages and identified by whole
numeral and half-ounce markings.
MADE IN THE USA
All syringes are packaged without dose pipes which are ordered separately to meet the
user’s requirements. All parts can be repaired or replaced.
OBJECTIVE: To aid in the oral administration of medication or irrigation procedures
when a dose pipe of choice is adapted. It can also be utilized as an instrument for
extruding fluids.
Barrel
Overall
Diameter
#22100 - 4oz. Long
7 1/2 ”
10 11/16 ”
1 1/4” OD
1 3/16 ” ID
Barrel
Overall
Diameter
#22120 - 4oz. Short
5 13/16 ”
8 1/4”
1 1/2 ” OD
1 3/8” ID
APPLICATION: Thread a dose pipe of your choice into the pump barrel by twisting
clockwise and finger tighten.
ORAL DOSING: Restrain animal. Depress the plunger rod all the way into the barrel,
place end of the pipe into fluid medication and slowly pull back on the plunger rod (using
the thumb ring) until dosage reaches desired capacity by reading the fluid ounce
measurements on the plunger rod. Cautiously insert the pipe into the side of the animal’s
mouth and place the end of the pipe near the throat opening. Do not insert too far into
the throat or damage could occur to the pharynx. Depress the plunger slowly, with the
aid of the thumb and finger rings, to extrude medication. Hold the dose pipe in the throat
until the animal swallows to confirm administration. Slowly remove the pipe from the
throat opening and pull out of the side of the mouth to prevent any damage to the animal’s
oral cavity.
IRRIGATION: Restrain animal. Fill syringe to desired amount with fluid as described
under oral dosing. The fluid amount administered at one time and the fluid pressure are
controlled by the user’s pressure on the plunger.
The syringe should be disassembled after use, thoroughly cleaned in soap and water
solution, and dried well. Apply mineral oil to the O-Rings and reassemble for future use.
The entire instrument can be autoclaved if necessary.
Barrel
Overall
Diameter
#22080 - 12oz. Short
14 5/8”
17 3/4”
1 1/2 ” OD
1 3/8” ID
ALL DOSE SYRINGES HAVE: 5/16” ID & 1” OD THUMB/FINGER RINGS
DOSE PIPES NOT INCLUDED WITH SYRINGES
SPECIFICATION: No more glass barrels to shatter, the barrel is constructed of
incredibly strong polycarbonate material. The dose adjustments can be easily determined
to administer 1ml, 2ml, 3ml, 4ml, or 5ml of labeled products. All of the assembled parts
can be either replaced or repaired. The complete syringe can be sterilized. For best
results, sterilize the Poly-Carb barrel disassembled from the rest of the syringe. Allow
the parts to cool before assembly. Thorough cleaning of the barrel before sterilization will
prolong the appearance. When assembling the syringe, after cleaning and sterilization,
be sure to apply a light lubricant such as mineral oil to the o-ring.
OBJECTIVE: To help ease the burden of filling the syringe with each injection when all
the animals being vaccinated are using the same dosage and medication. With the easy
pistol grip style you can have a firm and balanced control whether injecting
intramuscularly or subcutaneously. It saves time and gives exact doses as dialed.
APPLICATION: Each injection will give the exact amount of dosage pre-set from 1ml
to 5ml, by pulling back on the forward trigger. The pistol grip can be held and injected
from any variety of positions and angles. Make sure you have the right size needle with
a luer lock attachment and keep the needle injected until the dosage is administered
completely. Change the needle frequently to maintain sharpness for ease of injection,
cleanliness, and more humane treatment of the animal.
DIAL-O-MATIC
PISTOL GRIP SYRINGE
MADE IN THE USA
#22350 - 50ml
#22505
Luer lock adapter for syringe
Rubber grips on handles
No.
Cat. No.
Description
1
22505
Luer Lock Adapter (fits all sizes)
2
29205
Trigger Spring
3
29208
Mounting Screw & Nut
10ml
50ml
4
29210
29250
Barrel Assembly
5
29211
29251
O-Ring & Washer
6
29212
29252
Plunger Assembly
7
29213
29253
Trigger Assembly
8
29217
29257
Metal Sleeve for Barrel
barnes type dehorner
MADE IN THE USA
#23043 - Barnes Type Dehorner
13” Wood Handles
2 1/4” ID Head
#23044 - Barnes Type Dehorner
17” Steel Handles
3” ID Head
SS castrating knife
#23320 - 3”
SPECIFICATION: The #23043 Barnes type dehorner has 13” varnished hardwood
handles with high-grade steel heads attached by steel rivets and drive screws. The heads
are nickel-plated to aid in the prevention of oxidation. The cutting blades are heat treated
for long lasting sharpness. The #23044 Barnes type dehorner has 14-gauge, high-grade
tubular steel handles, 17” in length with rubber grip handles. The heads are manufactured
with high-grade steel to aid in the prevention of oxidation and both the heads and handles
are nickel plated to aid in the same. The heads are heat treated and attached to the
handles with steel rivets. Repairs are available upon request.
OBJECTIVE: To eliminate the growth of horns which can be a danger as animals
mature. In most breeds, it reduces the live market value when horns are present.
APPLICATION: The Barnes type dehorners are an excellent tool for calves at weaning
time (4-6 months of age) up to about one (1) year of age. If you are dehorning during fly
season, or another vector-type insect season, you need to have a fly spray or antiseptic
available. The instruments to have at your disposal might be artery forceps, hemostats or
surgical clamps. Many times, when the cattle are dehorned, the artery is clasped
between the thumb and forefinger, twisted and held for a few seconds, released and
returned back into the cranium. Check to make sure the bleeding is halted before
releasing the animal. Apply any antiseptic at this time. If bleeding persists, consult a
veterinarian.
SPECIFICATION: The three sizes of tube dehorners are ¾” I.D. (#23052), 7/8” I.D.
(#23053), and 1” I.D. (#23054). The handles are made of a durable hardwood and
rounded for ease and comfort of operation. The tubes are manufactured of high-strength
carbon steel and nickel plated. The cutting edges are precision sharpened and equipped
with protective covers. Custom lengths (conditional on quantity) and resharpening are
available upon request.
OBJECTIVE: To eliminate the growth of horns for safety to both the animal and the
handler. In most breeds, it reduces the live market value when horns are present.
APPLICATION: The dehorners can be utilized on calves from birth to eight weeks of
age (depending on the breed of the animal and size of the bud). Make sure the animal is
restrained with limited head movement. Remove the protective cover and place the
precision sharpened end over the horn bud. Push down and twist the dehorner back and
forth to penetrate the skin and get to the base of the bud. When the skin has been
penetrated and the tube can’t be pushed down any deeper, the bud should break off.
Grab the artery between your thumb and forefinger, twist and hold for a few seconds
and release. If you have a bleeder, use a pair of artery forceps to stop the bleeding.
During fly season, or another vector-type insect season, you need to have a fly spray or
antiseptic available.
tube dehorners
MADE IN THE USA
#23052 - 3/4” ID
#23053 - 7/8” ID
#23054 - 1” ID
SPECIFICATION: Manufactured of die-cast metal and nickel-plated. Bull leads are
durable and well balanced for easy handling. The nasal clamps are smooth finished,
rounded nodes to protect the nasal septum from puncture or acute damage while
maintaining control. Overall length is 7 ½”.
bull leads
OBJECTIVE: Utilized as an aid in the humane control of adult cattle in the course of
medical procedures involving the head and neck proximity.
APPLICATION: Attach a tether of choice onto the handle or the oblong link at the chain
end. Affix a twisted chain link onto the snubber for a secure fit of the nasal clamps and
tie off the tether to restrict head motion. Restrain the animal from head motion for safety
and ease of application. Open the scissor style handles to allow nasal clamp separation,
place the clamps on each side of the nasal septum and close the handles until the clamps
are set firm without pulling away. Reverse the procedure to release. Always use extreme
caution with instrument procedures.
MADE IN THE USA
Nasal Clamp
Oblong Link
Snubber
#23125 - 15” chain & locking device
w/snubber
TWITCH
MADE IN THE USA
#23225 - Long handle twitch
SPECIFICATION: The handle is constructed from quality hardwood. 27” in length, with
flat sides measuring 1 ½” x ½”. A nickel-plated steel twist chain is attached at one end of
twitch. The average chain length is 14” overall creating a 7” loop. The chain is attached
to the handle with a heavy-duty steel rivet placed through a seamless head cap. The
head cap is a high quality nickel-plated finish and rolled over at the chain attachment end
for safety of operation.
OBJECTIVE: To aid in the humane control of a horse by applying constant pressure to
the upper lip, therefore restricting an animal’s movement.
APPLICATION: To subdue a horse, place one hand through the chain and spread your
fingers and thumb to form a loop in the chain, while grasping the handle with your other
hand. Grasp the forward part of the horse’s upper lip with your open fingers and thumb
and slide the chain over your fingers and thumb to place around the upper lip. Twist the
handle until the chain is tight around the upper lip and release your grip of the upper lip
with your fingers and thumb. Continue applying pressure on the upper lip until the animal
is ready to be released, reverse the twist on the chain and pull the twitch away from the
animal with caution so as not to frighten the animal. Extreme caution should be
exercised when operating a twitch. Injury may occur to the horse or operator if struck by
the twitch.
SPECIFICATION: Package includes two high-impact nylon applicators with attached
tissue cutting blades on each applicator, one disposable scalpel, two iodine packs, one
disposable solution tray and 40 ligatures. The nylon ligatures have extreme strength and
flexibility, and can be utilized in low temperature ambient weather. NOTE: The blades
can become corroded with repeated exposures to disinfectant. The ligatures and scalpel
are sterile packaged, once opened they should be placed in the provided iodine/water
solution to aid in controlling contamination. All replacement parts may be ordered by the
provided catalog numbers.
MADE IN THE USA
OBJECTIVE: To be used as an aid in controlling hemorrhaging in castrating cattle.
APPLICATION: Make sure the animal is restrained. Incise the scrotum and expose the
testicle. Pull the testicle from the scrotal region so it is fully exposed. Steadily pull the
testicle downward until the surrounding cremaster muscle is exposed and separates. Do
not continue pulling the testicle after the cremaster muscle separates. Place the ligature
(clip) as far up the cord as possible. The ligature may be applied by closing with the
Stress Saver applicator or with your fingers. Cut the cord 1 to 2 inches below the clip
with the attached applicator blade or knife. This procedure aids in very limited bleeding.
Upon completion, repeat the procedure for the second testicle.
#23333 - Stress Saver
Kit Includes:
- 2 Applicators
- 40 Clips
- 1 Disposable Scalpel
- 2 Iodine Packets
- 1 Tray
Blade Replacement: 1) To remove, use a screwdriver to flip the post out of the slot, 2)
With silver button down, slip post into slot on applicator, 3) Push up with thumb to secure
the latch.
Loading Clips: Holding the applicator with the silver button facing up, push the male side
of the clip into the right slot. Applicator will say, “Load this side”.
Additional Items:
#23335 - 100 Clip sterile packet
#23336 - 2 Applicators/4 Blades
Apply clip to cord
10
Clip applied to cord
Cut cord with applicator
blade attachment
below ligature
SPECIFICATION:
Teat Slitter - Chrome-plated brass; 3-ring; 8-1/8” long, 1/8” diameter tube. Double
blades concealed in tip of tube until thumb ring is depressed
teat slitter
teat tumor extractor
Hug’s Teat Tumor Extractor - Hug’s style with polished chrome; 6-3/4” long; 3/16”
diameter
OBJECTIVE:
Teat Slitter - A surgical instrument used to enlarge the teat opening for greater milk flow.
Hug’s Teat Tumor Extractor - A long, thin, cylindrical instrument highly recommended
for the removal of small fibrous tumors and calculi formations from the interior wall of the
teat canal.
APPLICATION:
Teat Slitter - The slitter is introduced into the teat cistern in the closed position, opened
so that the blades protrude and then withdrawn so as to slit the blocked or constricted
teat sphincter.
Hug’s Teat Tumor Extractor - The blunt-tipped instrument is inserted into the teat canal
closed, then is extended while working calculi against extractor shaft. Tip is then closed,
pinching and cutting a small piece of the calculi off. Process is repeated until calculi size
is reduced enough to pass through canal.
SPECIFICATION: Nickel plated brass construction. The milk tube adjusts to 2 inch
and 3 inch length. Tubes are 1/8” OD and 1/16” ID diameter and can be autoclaved or
sterilized before use.
#23822 - Teat Slitter 3-ring, twin blade
#23824 - Hug’s Teat Tumor Extractor
milk tubes
OBJECTIVE: The milk tubes are utilized to remove exudate from within the teat canal
by drainage.
APPLICATION: The adjustable milk tubes must be sutured to hold the tubes in place for
drainage of exudates. Suturing should be performed by a veterinarian or trained
personnel. Use caution with all applications and consult with your veterinarian.
MADE IN THE USA
#23826 - Adjustable
SPECIFICATION: Overall length is 18 ¼”. The die cast metal, nickel plated head is 1
1/8” ID and 3 ¼” long. The plunger shaft body is 3/8” diameter, 15 ¼” length. Constructed
of brass with nickel plating. The thumb/ finger rings and head cap are zinc die cast with
1” ID rings. All parts can be repaired or replaced.
balling guns
METAL HEAD
OBJECTIVE: To aid in the medical application of a bolus via an oral administration.
APPLICATION: Restrain the animal’s head. Pull back the plunger by grasping the thumb
ring and insert the bolus into the head of the instrument. Place the head of the gun into
the side of the animal’s mouth, align with the center of the mouth while placing the head
into the throat opening. Do not force the gun head too far down the throat due to
possible pharynx damage. To release the bolus; place thumb into thumb ring and fingers
into the head cap rings, push the plunger firmly with the thumb and release the bolus.
After dispensing bolus, hold for a brief time until the animal swallows to confirm
administration, pull straight back on the gun assembly and pull to the side of the mouth
after clearing throat entry. Always use extreme caution with instrument procedures.
MADE IN THE USA
#24325 - Equine Balling Gun
11
balling guns
clear head
SPECIFICATION: Balling guns are produced with vinyl heads that can be interchanged
on the same shafts, or replaced if damaged. The overall length is 18”. The thumb ring
and finger rings are die-cast zinc, the plunger body shafts are brass and the plungers are
aluminum. All parts can be replaced.
OBJECTIVE: To aid in the medical application of a single bolus via oral administration.
MADE IN THE USA
CLEAR HEAD Length 18”
#24002 - 5/8” Head
#24008 - 1” Head
APPLICATION: Pull the plunger back by grasping the thumb ring and insert the bolus
into the vinyl head. The bolus should fit snugly. Do not force the bolus into the head or
when the plunger is released it could cause damage to the bolus. Insert the gun head into
the animal’s mouth at the side, center to the front of the throat, push on the plunger and
release the bolus. Be cautious and do not force the balling gun too far down the throat
or damage to the pharynx may occur. After the bolus is released, wait to make sure it is
swallowed. Slowly pull straight back and remove from the mouth. Clean with soap and
water. Always use extreme caution with instrument procedures.
CALF & SHEEP Length 12”
#24115 - 1/2” Head
#24116 - 9/16” Head
#24117 - 5/8” Head
multi-dose balling gun
SPECIFICATION: Manufactured from brass tubing with a nickel finish; 1 1/8” ID, 1 ¼” OD
and 18” length. Holds up to five boluses. The thumb ring and two matching finger rings
are die-cast zinc, the plunger is aluminum and all parts can be replaced. If required, the
entire gun may be autoclaved or sterilized. The extracting head of the gun is rounded and
polished smooth to prevent injury to animal.
OBJECTIVE: To aid in the medical application of one to five boluses via oral
administration.
MADE IN THE USA
#24327
12
APPLICATION: Remove the screw on the shaft and place in any of the predrilled holes
(4) to regulate the number of boluses for application. A spring is located in the gun tube
to aid in holding the boluses within the gun prior to application. Do not force the boluses
into the head. Insert the gun head into the animal’s mouth at the side, center the gun to
the center of the throat, push on the plunger and the bolus will release. Be cautious and
do not force the gun too far down the throat or damage to the pharynx could occur. After
releasing the bolus make sure it is swallowed before removing the gun. Slowly pull back
the gun and remove it from the mouth. Clean with soap and water, dry well. Always use
caution with instrument procedures.
SPECIFICATION: The obstetrical (OB) chains (#25141 & #25146 ) are USA
manufactured from high-quality nickel-plated steel with twist links and are high tensile
strength (1200 lbs). The twist-link design aids in the prevention of slippage and damage
to the animals’ legs. It also provides a snug grip for the handles when they are placed on
the twist-links for leverage. The oversized oval links on each end of the chain are made
of hardened carbon steel for strength. The #25132 handle is constructed of die cast zinc
and nickel plated. The #25135 handle is solid welded stainless steel including a modified
vinyl grip that can be autoclaved. The stainless steel handle is a more durable material
than die-cast zinc. The choice of chain length is dictated by where the placement of the
fetus is in the birth canal. The shorter length chain is best used when the front legs are
exposed and the longer length if the fetus is displaced in the birth canal. The handle
selection has no direct effect on the procedure and is user preferred.
o.b. chains & handles
MADE IN THE USA
OBJECTIVE: The OB chains and handles are utilized for aiding in the delivery of a fetus
when assistance is required during birth.
APPLICATION: Feed the chain twist-links through the oval ends of the chain to form a
loop which is placed snugly over the animal’s front feet above the hooves. The handle
hooks are placed on the chain twist-links where they are the most convenient and
comfortable for the pull-assisted birth. Grasp the handles and firmly pull on the chain
in conjunction with the animal’s uterine contractions. Pull firmly and smoothly but try to
avoid extreme jerking and unnecessary pressure due to the possibility of injuring the
fetus and/or the dam. Remove and thoroughly clean the equipment after the assisted
birth is completed. It is best to consult a veterinarian for further information or assistance
in most situations where there is a birthing difficulty.
#25141 - 30” High Tensile Chain
#25146 - 60” High Tensile Chain
#25132 - Die-Cast Handle
#25135 - Stainless Steel Handle
thermometer
#28420 - Thermometer with Case
(F & C Scale)
13
o.b. wire saw & handles
MADE IN THE USA
SPECIFICATION: A handy, pliable plastic container with 32 feet of 3x9 ply, 27 strand,
high-tensile-strength galvanized steel obstetrical wire. The length can be custom ordered
upon request, ask for details. The handles are die-cast metal and nickel-plated with a
thumb screw to secure the wire in place. The handles are packaged as a pair.
OBJECTIVE: The high-tensile-strength wire saw and handles, with the aid of a fetatome,
are used primarily in obstetrics to remove a fatal fetus from an animal’s reproductive tract.
There are several uses for the wire saw and are solely imaginative in compliance with the
user’s discretion. When using the wire saw for obstetrical procedures, it is
recommended for use by a veterinarian or under the direction of a veterinarian.
APPLICATION: The length of wire used varies with each application and user. Place
one end of the wire through a handle opening and tighten with the thumb screw for
security. After the length is decided, cut the wire and place the other handle on the
opposite end. To prevent damage to the reproductive tract, a fetatome or vaginal
speculum is recommended for use with a wire saw. If you do not cut the wire and leave
as one piece by slipping a handle along the wire to a desired location, cut the wire after
use of that wire section. When the handle thumb screw has been secured it can break
some wire strands and weaken the wire to make it vulnerable for future use at that direct
location.
#25913 - High Tensil Strength Steel
#25915 - Handles
o.b. snares
MADE IN THE USA
SPECIFICATION: The snares are manufactured with steel cables, stainless steel rods
and solid aluminum T-handles. The round aluminum handle is 3 3/4” in length by 5/8”
diameter on both snares. The #25841 has a 5/32” diameter by 20 ½” length exposed
cable and a 28” length shaft. The #25842 is equipped with a 3/32” by 15” length exposed
cable and a 17 ¼” shaft.
OBJECTIVE: To aid in the dystocia (abnormal position) of a fetus within the womb.
When using a snare you can prevent a difficult delivery, possibly save the neonatal from
mortality or morbidity, and recover a healthy dam and /or fetus.
APPLICATION: Place the snare around the animal’s nose or leg and pull on the snare
handle to secure a proper placement of the fetus before or during parturition (birth). Use
caution and do not apply excessive pressure or damage could occur. If repositioning can
not be accomplished a veterinarian should be consulted for assistance.
#25841 - Bovine
#25842 - Porcine
14
SPECIFICATION: All tubing is cut in 10’ lengths. Actual sizes for outside and inside
diameters are on attached drawings. Koroseal and clear tubing are constructed of plastic
flexible vinyl tubing with finished beveled ends. Koroseal is a black color to show less
staining after prolonged use.
tubing
OBJECTIVE: To aid in the administration of medication or to extrude liquid or gas from
an animal’s stomach / rumen.
APPLICATION: The animal should be well restrained or sedated before attempting to
utilize the tubing which will probably be attached to an injection pump. Pass the tubing
through the throat speculum until it is in the stomach / rumen area. A pungent odor will
be emitted from the stomach / rumen and a rumbling or gurgling sound will be present if
it is inserted properly. If the tubing is in the lungs you will feel the air flow at the exposed
end of the tubing. If the procedure is performed intranasally, the preceding description
of application and operation are followed. See the injection pump application for more
detailed operation and procedures.
MADE IN THE USA
Latex Tubing - 50’ Roll
Clear Tubing - 10’ Roll
Koroseal Stomach Tubing - 10’ Roll
15
injection pump
MADE IN THE USA
#26845 - Leather Packing Pump
#26850 - O-Ring Pump
SPECIFICATION: The #26845 Injection Pump features leather packing on the end of
the plunger whereas the #26850 Injection Pump has an O-Ring. A felt washer is located
at the head cap of both instruments and as it wears, simply tighten the head cap until the
vacuum is corrected or the unit quits leaking. It is very important to keep the felt washer
(#10) lubricated. If it dries out and will not absorb properly it needs to be replaced or
leakage will continue. The instruments are manufactured of seamless, nickel-plated, ultra
-durable brass tubing. The exposed end of the plunger has a solid brass, nickel-plated,
convenient oversized T-handle for easy grasping and operation. The continuous flow
design allows pumping on both the “in” as well as the “out” stroke of the plunger. The
upper and lower adapters are graduated in dimensions to accommodate various diameter
size tubing. The tube, when connected to the lower adapter, will only draw and not
extrude fluids. Parts and service are available upon request.
OBJECTIVE: The continuous flow injection pump is utilized as an aid in removing fluid
from an animal’s stomach or in administering fluid treatment for gastrointestinal, rumen or
fluid complications.
APPLICATION: The animal should be well restrained before attempting to utilize the
injection pump with tubing and/or speculum. Place the tubing parallel to the animal’s
frick stomach speculum
side to estimate the approximate length of tubing to mark for identification of tube length
from the mouth to the stomach/rumen area. When using a Frick speculum, place it in
the animal’s mouth either from the side or front of the mouth. You need to be cautious
and not place the end of the speculum in the throat area as this may cause ulcerations.
Pass the tubing through the speculum until it is in the stomach/rumen. Confirm the tubing
is located within the stomach/rumen and not in the lungs. There will be a pungent odor
emitted from the stomach/rumen and a rumbling or gurgling sound will be present if it is
MADE IN THE USA
inserted properly. If the tubing is in the lungs, you will feel the air flow at the exposed end
of the tubing. After insertion is properly accomplished, fit the exposed tubing end over
the upper pump attachment located on the hex head (#11). Connect separate tubing to
the bottom adapter of the pump (#16) and place one end into the fluid for
#26036 - Frick Stomach Speculum
administration. If you do not use the separate tubing, then simply immerse the bottom of
the pump into the fluid for administering. The pump will inject fluid on both the “in” and
“out” movement of the plunger when the hose/hoses are attached as described above.
Replacement Parts:
To remove tubing from the stomach/rumen, release the tubing from the upper adapter
#29292 (3 & 10) – Leather & Felt (#17). Upon releasing, plug the open end of the tubing with your thumb and gently
Washer Kit
#29293 (4 & 10) – O-Ring & Felt Washer remove the tubing and the Frick speculum from the animal. To draw fluid contained in
the stomach/rumen, attach tubing to the pump bottom adapter (#16) after the speculum
Kit
and tubing have been applied as previously described. The bottom attachment will
#29785 (6) – Packing Ring
allow drawing or suction away from the stomach/rumen. If the procedure is performed
#29787 (8) – T-Handle
intranasally, the speculum is not utilized but the preceding description of application and
#29793 (14) – Hose Adapter Washer
operation are followed.
1 - Brass Ball
2 - Packing Nut
3 - Leather Washers
4 - O-Ring
5 - Frame
7 - Metal Plunger
9 - Head Cap
10 - Felt Washer
11 - Hex Head
12 - Plunger Tube
13 - Bottom Valve
15 - Notched Bottom
16 – Bottom Hose Adapter
16
After completion of the procedure, clean the hose and instrument well with soap and
water and apply mineral oil through the pump to lubricate the plunger O-Ring (#4).
Unscrew the head cap (#9) and lift up to expose felt washer (#10) for oil lubrication.
Screw back down (#9) and hand tighten.
SPECIFICATION: Assembled with a 4-foot length of high-grade latex rubber tubing
including a 6-inch pliable natural rubber funnel with an air vent. The funnel can be
applied to most standard bottle sizes from a 250 ml to a 1,000 ml after the seal and
stopper are removed. Packaging includes a 14-gauge x 1 ½ inch sterilized disposable
needle and a flow adjustment slip adapter. All parts can be replaced.
intravenous set
OBJECTIVE: To aid in the sterile administration of intravenous fluids and medications.
APPLICATION: Prior to usage, the Intravenous Set should be removed from the
package and sterilized to prevent any infection.
MADE IN THE USA
Aseptically, remove the metal crimp seal and stopper from the IV medication to be
administered. Apply the funnel of the Intravenous Set over the neck of the IV medication
bottle, raise and invert the IV medication bottle to allow all of the air in the latex
rubber tubing to be evacuated and filled with IV medication. Close the flow adjustment
slip adapter when the IV medication has completely filled all of the latex tubing and is
beginning to drain from the metal hub.
Remove the disposable 14-gauge needle from the plastic sheath and aseptically insert
the needle into a jugular vein. Ensure that the needle is in the vein by confirming the flow
of blood from the hub of the needle. Apply the metal hub of the Intravenous Set to the
plastic hub of the disposable needle. Open the flow adjustment slip adapter and
administer the IV medication according to the manufacturer’s recommendations.
#27067
When the fluid level has reached the funnel of the IV set, completely close the flow
adjustment slip adapter and remove the needle from the jugular vein. Place a sterile
gauze pad over the needle hole and apply finger pressure to the gauze pad until bleeding
has stopped.
Afterwards, dispose of the 14-gauge needle in an appropriate manner and fully rinse the
Intravenous Set by connecting the funnel to a faucet and running tap water through the
tubing for several minutes. Clean any debris from the outside of the tubing and sterilize
before the next usage.
PRECAUTIONS: Improper administration of IV medications may result in severe
complications. Only properly trained individuals should administer intravenous fluids and
medications. Consult with a veterinarian before attempting this procedure.
SPECIFICATION: The #28450 sheep crook is manufactured of hardened carbon steel
and black matte painted finish. The attachment assembly is 4 ½” long by a 1” diameter
with a wood screw attached for handle assembly to a wooden shaft. The hook is 9” in
length with the curved side a 6” length (see image). The hook opening is 1” in diameter
and 1 3/8” at the holding arc. The crook can be ordered by itself or with a white birch
wood handle.
OBJECTIVE: The crook enables the animal to be humanely captured or controlled
without the use of other restraints, such as a rope or attempting hands-on capture.
sheep crooks & handles
MADE IN THE USA
APPLICATION: Crook the animal’s rear leg, near the knee joint and go hand over hand
down the shaft until the animal can be subdued. It can also be used to control the animal
until a second party can grasp the animal and subdue it. Always use caution when
approaching an animal to prevent injury.
#28450 - Without Handle
#28460 - 1-Piece 8’ Handle
17
hog holders
SPECIFICATION: The hog holders are standard with 3/16” galvanized aircraft cables,
3 3/4” length solid steel T-handles and 5/8” diameter durable, high-strength carbon steel
tubing and rods that are nickel plated and corrosion resistant.
The #27352 mini hog holder is a select instrument for handling small swine. The overall
length is 16”, with a 4 1/2” rubber grip handle and a 20 1/2” loop of cable.
MADE IN THE USA
The #27350 Iowa hog holder is 37” in overall length, with 4 1/2” rubber grip handle, 26”
length rod and a 25” loop cable. A removable locking ratchet will hold any position along
the rod, and the cable easily adjusts at the handle.
The #27348 Premium hog holder is 37” in overall length, with 4 1/2” rubber grip handle,
27” length rod, and a 25” loop cable. The instrument has a safety lock at the handle for a
quick, easy release. Repairs and replacement parts are available upon request.
#27353 - Extra Cable
#27352 - Mini Hog Holder
#27351 - Extra Cable
#27350 - Iowa Hog Holder
OBJECTIVE: To aid in the humane restraint of swine for the purpose of animal control,
safety of handling, and applications related to medical procedures.
APPLICATION: Grasp the hog holder with the rod in one hand and the other hand on the
T-handle with the cable loop fully extended. Approach the animal from the front. Insert
the cable loop into the mouth and pull on the T-handle to tighten the cable around the
snout. When the cable is tight, keep constant tension on the T-handle to secure
application. Proceed with caution.
When objective is accomplished, cautiously remove the cable by pushing forward on the
T-handle while grasping the rod with one hand and pull the instrument away from the
animal.
#27351 - Extra Cable
#27348 - Premium Hog Holder
equine dental wedge
MADE IN THE USA
SPECIFICATION: The mouth wedge is made of a stainless steel material to provide long
lasting use. The wedge is designed to provide the arcade more comfort and safety with
a guide on the inner and outer edge to minimize movement. The support bar is a sturdy
aluminum alloy. The adjustable eye hook has a 48” nylon rope provided for securing the
wedge to a halter ring.
OBJECTIVE: A rapid and easy-to-use instrument to give access to a horse’s mouth.
The wedge allows the animal’s mouth to remain open for procedures to be performed
while limiting discomfort to the animal.
APPLICATION: (1) Place the wedge on the opposite side of the mouth you desire to
work on. (2) Make sure the teeth are centered on the stainless steel bar. (3) Pull the
wedge back against the mouth firmly. (4) Place the nylon rope over the head and tie off in
a slip knot around a halter ring. If you need to remove the wedge in a hurry, pull the slip
knot and the wedge will break free. A horse will raise its head when working on the lower
jaw and tethering with a tightly secured lead rope is recommended.
#28915
18
SPECIFICATION: A reinforced mouth speculum manufactured by Western Instrument
Company. The production material is a high-quality stainless steel with improved cups,
lower and upper jaws, and dual ratchets. The straps are made of 8 to 10 ounce latigo
leather with nickel-plated strap buckles. Special length straps are available upon request.
All parts are available for replacement. See the detailed drawing for specifications.
OBJECTIVE: The mouth speculum safely holds an animal’s mouth open and
immobilized for extensive work while performing surgery, floating, or other oral/dentitionrelated procedures.
mcpherson equine
mouth speculums
MADE IN THE USA
APPLICATION: Place the assembled speculum in the animal’s mouth and adjust the
straps for a snug, but comfortable fit. Make sure the incisors fit inside the cups. Adjust
the right and left jaws for correct open mouth width by adjusting the ratchets. If the
animal is active, the head should be secured in a fashion where mobilization is minimal
to prevent any harm to the animal or operator. When the procedure is completed, the
speculum should be cleaned and dried well to extend the life of the instrument. Incisor
bars are available as accessory items.
#28922 - Stainless Steel Speculum
#29619 - Incisor Bars - S.S. (pair)
#29620 - Mouth Cups, S.S. (pair)
house equine dental float
#28974 - House Combination Equine
Dental Float
MADE IN THE USA
(straight and angular float, handle, rasp & file
blades)
19
fischer combination equine
float x - long handle
& extension
MADE IN THE USA
#28968 - With 2 carbide chip blades
#28966 - With diamond chip float blades
SOLD SEPARATLEY
#28969 - E-Z Adjustable Float Handle
(fits House & Fischer floats)
SPECIFICATION: The solid steel straight float shaft is assembled with a removable
wooden handle, float attachments consisting of a 30-degree angular float and a straight
steel float, a five-inch long float extension, an EZ handle, and medium-grit carbide chip
blades. When ordering, specify substitutions of fine-grit carbide chip blades, diamond
chip blades, or hardened carbon steel blades. The wooden handle assembly can be
easily removed from the shaft by the screw in the end of the handle. After removing the
wooden handle, replace the screw and washer into the steel shaft. The float can now be
used only as a pistol grip with assembly of the EZ handle applied to the steel shaft. If
desired, the wooden handle can be left attached, the EZ handle applied, and used
accordingly to the operator’s preference. Entire assembly of parts can be repaired or
replaced.
OBJECTIVE: Floating is only one dentition procedure to maintain the symmetry of the
arcade in an animal’s mouth and to allow for an unimpeded elliptical chewing motion, as
well as assist in bit pressure performance and a guide to better animal health. If the
arcade is left unattended, the animal can experience vast pain intraorally which can lead
to nutritional problems, negative disposition, dental dilemmas and poor performance in
the athletic or working animal.
APPLICATION: To augment professional results in floating, it is important to maintain a
concise routine to reduce animal stress and resistance. After the animal has been well
restrained (see speculum and wedge application), approach the animal with a steady,
slow movement to allow familiarity and observation of the operator and float. Slowly
insert the float into the mouth of the animal to allow a gradual sensation of the foreign
object. Start by floating the upper arcade premolars with the 30-degree angle float head.
Initially begin with short, low pressure strokes until the animal accepts the procedure and
continue with firm strokes until the floating is accomplished. Hand position adjustment is
critical because it influences float head positioning, adjust accordingly to feel and sound.
Tooth particles should be visible the full length down the middle of the float blade if the
procedure is being done properly. Remove the float occasionally for examination and
make corrective adjustments. Equine animals should have a thorough biannual
examination of the mouth arcade to denote any abnormalities. During the floating
procedure it will be necessary to use different angle heads and possibly different grades
of blades (user’s discretion). For proper floating procedures and dentition problems
consult a veterinarian acquainted with equine health.
Parts for ALL Western Instrument Company floats are interchangeable
SPECIFICATION: The heads are 1” wide, 3 1/4” long and 1/8” high
Float blades
APPLICATION: Blades can be used in either the Fischer or the House float. Courser
grit blades are used for nearly all of the floating procedure. The fine blades are primarily
utilized as a finisher. Diamond chip features extended use durability (100+ head per
blade)
Diamond Chip
Hardened Carbon Steel
#28984 - Medium Grit
Carbide Chip
#28976 - Rasp & File Blade (dual side)
20
#28979 - Medium Grit
MADE IN THE USA
Introducing
Stone Manufacturing & Supply Company Products
Western Instrument Company is pleased to introduce these specially selected Stone Manufacturing & Supply products
to our line. Western and Stone have agreed to cross market products manufactured by each company. Both companies
share the same business philosophies and values of family pride, American made, and dedication to quality and service.
This joint marketing effort offers a wider variety of quality and innovative products to help improve your productivity.
Standard terms and policies offered on Western Instrument Company products also apply to all Stone products. See inside back
cover for complete details.
Small ear notch
Cuts a clean V notch. Ideal for baby pigs.
• Lightweight die-cast aluminum construction
• Heat-treated cutting plates for long life & clean cuts
• Individually hand-fitted and tested for precision tolerance
#27000 – Small Ear Notcher 5/16”
#27310 – Small Ear Notcher 3/16” with fixed depth gauge
medium ear notch
Features adjustable depth gauge and cuts a ½” notch at
base
• Lightweight die-cast aluminum construction
• Heat-treated cutting plates for long life & clean cuts
• Individually hand-fitted and tested for precision tolerance
#27125 – Medium Ear Notcher, V die cut
#27130 – Medium Ear Notcher, U die cut
#27132 – Medium Ear Notcher, Square die cut
large ear notch
Features adjustable depth gauge and cuts a 13/16” notch at
base
• Lightweight die-cast aluminum construction
• Heat-treated cutting plates for long life & clean cuts
• Individually hand-fitted and tested for precision tolerance
#27235 – Large Ear Notcher, V die
#27240 – Large Ear Notcher, U die
21
Ear Punch
• Classic proven design for punching farther into the ear.
Oil impregnated bronze bushings to prevent sticking. Use
alone for ear identification or to punch holes for ear tags
• Long cutting life
• Lightweight aluminum construction with case hardened
steel punch
#27550 – 3/8” Ear Punch
#27560 – ¼” Ear Punch
deluxe tooth nipper
• Clips needle teeth precisely and quickly
• Surgical quality 5” nipper with spring-operated action
• Precisely ground undercut leaves clean edges
• Chrome-plated, high-quality steel holds edge longer than
stainless steel
#27415 Deluxe – Superior quality, German import
tooth nipper
• Stainless steel construction
• Heat-treated for durability
#27435 – Standard Tooth Nipper – economy import
#27450 – Tapered Jaw Nipper – economy import
22
Socorex Syringe
Superior Quality – Swiss Import
Always give the right dosage with this self-refilling syringe
with spring-loaded plunger and 3-way valve. Available in
six capacities (0.5ml to 20ml) to meet all your vaccination
needs.
• Improved ergonomic shape, perfect balance for
fatigue-free handling
• Precision volume setting with high dose-to-dose
reproducibility
• Unique hassle-free construction – 6 main parts
• No o-rings to replace, easy to disassemble, clean and
maintain
• Ideal for injecting products that contain harsher
ingredients which can damage rubber
• Stainless steel plunger works directly against hard
machined glass barrel
• Can be fully autoclaved at 248° F
Socorex Syringe
with Vial Holder
Socorex Syringe
with Feed Tube
Socorex Twin Syringe
with Feed Tubes
ONLY 6 MAIN PARTS - Easy to disassemble, clean and
maintain. No o-rings on the plunger
Socorex with
Vial Holder
Socorex with
Feed Tube Kit
Socorex with
Feed Tube & Vial Holder Kits
Socorex Twin with
Feed Tube Kits
Capacity
#29300
#29400
#29500
#29100
.5ml
.1-.5ml
.05ml
#29301
#29401
#29501
#29101
1ml
.1-1ml
.05ml
#29302
#29402
#29502
#29102
2ml
.3-2ml
.1ml
#29305
#29405
#29505
#29105
5ml
.5-5ml
.5ml
#29310
#29410
#29510
10ml
1-10ml
1ml
20ml
5-20ml
1ml
#29420
Volume
Range
Increment
23
Socorex Ring Handle Syringe
The exact same syringe as the pistol grip model with
convenient new twin ring design. Available in 0.5ml, 1ml,
2ml, and 5ml syringe sizes.
Socorex with
Feed Tube Kit
Capacity
Volume
Range
Increment
#29430
.5ml
.1- .5ml
.05ml
#29431
1ml
.1-1ml
.05ml
#29432
2ml
.3-2ml
.1ml
#29435
5ml
.5-5ml
.5ml
• Ease in handling syringe around chutes and stanchions
• Straight line actuation reduces user fatigue
• Overall design may aid in reducing repetitive motion
syndrome
• Feed tube configuration can be conveniently hung right at
the chute
• Twin Ring design allows for excellent control of the syringe
while in the working environment
- Reduces potential of self-injection.
- Enhances ability to administer proper dosage.
- Dramatically reduces possibility of animal caused dosage losses.
- Better control reduces potential of broken needles.
Manifold for Socorex Twin Syringe
• Allows for the twin syringe to be used for one needle
injection.
#29570 – Manifold for Socorex Twin Syringe
Vial Holder Kit
• For upright vial or bottles. Kit includes 2-piece slanted vial
holder, locking ring, bottle-lock, tube connector and intake
needle.
#29517 – Vial Holder Kit
Feed Tube Kit
• Kit includes 1 tube (39.5”), 1 sinker, 1 aspirating cannula
(7.5” feed needle) and 1 vent cannula (disposable needle).
Does not fit 20ml Socorex syringe.
#29515 – Feed Tube Kit
Feed Tube with Bottle Spike
• Use this handy bottle spike for inverted vials. Can be
used with other style syringes.
#29825 – Feed Tube with Bottle Spike
24
Ratch-A-Pull Double Action Calf Puller
• Variable side-to-side pull for maximum control and
maneuverability
• Provides straight, consistent pulling action
• 77” solid steel rod provides long, continuous pull,
eliminates need for re-attaching chains
• Deep grooves on pole provide positive locking to prevent
slippage of ratchet, and damage to pole
• Heavy-duty, solid steel construction of pole and ratchet is
strongest available
• Pole threads together at midpoint for easy breakdown and
assembly
• Entire puller and breech spanner fits handily into canvas
carry bag for easy portability, secure storage. No lost
parts!
• Smooth, precise craftsmanship in every detail
• Precision hook design grips OB chain securely at any
point to prevent slippage or slack (chain sold separately)
• Ratchet is capable of 1,400 lbs pull
• Aluminum alloy breech spanner with washable web strap
included with puller
#233100 – Ratch-A-Pull with Breech Spanner & Strap
Brush
• Slips over end of pole
• Stiff bristles reach all areas in grooves
• Also used to clean parts of the ratchet
#233120 – Ratch-A-Pull Brush
Accessories
• High quality canvas bag breathes
• Nylon stitching prevents rot
• Velcro pocket for accessories
#233110 – Ratch-A-Pull with Breech Spanner, Strap, and Carry Bag
#233125 – Ratch-A-Pull with Breech Spanner, Strap, Carry Bag, two 30” OB Chains, Cleaning Brush, one OB Hook and one 8oz. bottle of OB Lube
#233108 – Ratch-A-Pull Carry Bag
# 233110
# 233125
25
Power Pull Calf Puller
• 9 foot, easily sanitized galvanized steel aircraft cable
• Grab-hook grips OB chain at any point (OB chain sold
separately)
• Power Pull and chain detach easily to allow variable uses
with or without pole
• Sturdy aluminum alloy breech spanner includes washable
web strap
• Nickel-plated tubular steel pole disassembles into two
parts for easy storage
• Power Pull’s 14:1 power ratio offers up to 1,500 lbs.
pull with 50% overload factor – light in weight, yet strong
enough to stretch a fence
#233020 – Calf Puller, Complete
#233010 – Calf Puller Attachment Kit without Power Pull
#233001 – Power Pull only, with Chain
OB Chain Handles
• Easy grip
• Sturdy, smooth, nickel plated ductile iron
• Grips chain at any point
#210015 – Iron OB Handle
• Easy grip, two hand pull
• Grips chain at any point
#210030 – T-Bar OB Handle
• Easy grip, two-hand pull
• Designed for side-to-side action
• Grips chain at any point
#210040 – T-Bar Double Hook OB Handle
26
Calf Weaners
Kant Suk Calf Weaners
• Effectively controls sucking habit without discomfort
– prods are long enough to remind calf, short enough not
to injure
• Easily installed and removed
• Plated, rust resistant
• Conforms to muzzle and shaped to prevent front and side
approaches to udder
• Will not interfere with grazing.
#21055 – Kant Suk Calf Weaner 6 1/2” x 3”
#21056 – Kant Suk Yearling Weaner 8” x 3 ½”
#21057 – Kant Suk Cow Weaner 8 ½” x 3 ¾”
Crown Calf Weaners
• Self-piercing
• Solid aluminum ring with stainless steel crown
#2260 – Crown Calf Weaner 5/16” x 2 ½”
#2264 – Crown Calf Weaner 3/8” x 3”
27
Dehorners
Electric Dehorner
• Lets you decrease stress by dehorning at a young age
• Searing action reduces blood loss
• Quick, easy use. Fast results
• 110 Volts, 240 Watts
• 7/8” inside diameter
#224210 – Electric Dehorner
Double Electric Dehorner
• Saves time: One instrument handles newborns 3-10
days old, flip it over for larger calves up to 12 weeks (some
breeds to 6 months)
• Cauterizing action reduces blood loss and helps prevent
infection after mechanical dehorning
• Solid bronze, long-life heating element heats up fast,
holds heat longer
• 110 Volts, 450 Watts
• 3/4” and 1” inside diameter
#224310 – Double Electric Dehorner
Barnes Knuckle Saver Dehorner
• 18° offset tubular steel handles, lets you fully close
cutting edges in much less space. Ideal for close quarters
– holding pens, around headlocks, and squeeze chutes
• Only 16” long
• Precision, keenly sharp, hardened cutting blades,
perfectly matched
• No binding, no skin tags
• Heavy-duty steel handles with rubber grips
• Rust resisting oxidized finish
#224229 – Large Knuckle Saver (jaw opening 1 ¾” x 3”)
#224249 – X-Large Knuckle Saver
(jaw opening 2 ¼” x 3½”)
28
Castrating Instruments
• A patented instrument and technique available exclusively
from Stone
• Minimizes blood loss and risk of hemorrhage
- Twisting action effectively closes cord and vein
• Reduces risk of trauma, post-castration swelling
• Use with any age bull, especially heavy weight (500-900
lbs.) bull where risk of blood loss, swelling and infection
are high
- Faster than other techniques for big bulls
• Field tested by veterinarians and cattlemen
- Used effectively on hundreds of thousands of bulls
• Mounts on a standard variable speed hand drill with 3/8”
chuck (preferably cordless)
- Reverse tapered shank aids in retention in keyless type chucks
• Constructed of stainless steel with brush finish to resist
rust
- Easily sterilized, autoclavable
#229500 – Henderson Cattle Castrating Instrument and DVD
#229600 – Henderson Cattle Castrating Instrument
System (includes Newberry Knife and DVD)
• Same technology as patented Henderson Cattle
Castration Instrument
• Field tested by veterinarians since 1999
- Used effectively on tens of thousands of horses
• New jaw design specifically developed for equine
• Removable bolt in pivot joint enhances cleaning and
sterilizing
• Constructed of stainless steel with space-age Teflon
coating to resist rust
- Easily sterilized, autoclavable
• Reverse tapered shank aids in retention in keyless type
chucks
#229900 – Henderson Equine Castrating Instrument with DVD
• Slits the scrotum side-to-side for easy access to testicles
• Improves drainage post castration to reduce swelling and
promote faster healing
• Crafted of stainless steel with 2” knife
• Form-fitting handle and balanced for fast, easy use
• Preferred knife to use with the Henderson Castrating Tool
#229700 – Newberry Knife – economy import
29
Castrating Instruments cont.
• Multi-purpose plier designed for use on sheep, goats,
and small calves
• Also useful for docking and dehorning
• Durable, precise operation
- 9-3/8” long, easy to fit in pocket
- 1-3⁄4” diameter spread
• Stone Castrating Rings are highest quality rubber,
designed to work perfectly with Band Castrator Plier
#229804 – Band Castrator Plier
(economy import)
#229810 – Castrator Rings, Bag of 100
• Multi-purpose plier designed for use on sheep, goats,
small calves
9-3/8” long, easy to fit in pocket
1-3⁄4” diameter spread
• Also useful for docking and dehorning
• Impact resistant, high density composite construction
#229814 – Composite Handle Castrator Plier
(economy import)
Cow Magnet
• Designed specifically to combat Hardware Disease
• Sized to be easily administered with a balling gun, or by
hand
#211000 – Cow Magnet 1/2” x 3”
30
Heavy Duty Hoof Trimmer
• Trimming hooves is quick and easy with this heavy-duty
tool
• 32” handles
• 3” wide cast steel cutting blades
#230900 – Heavy-Duty Hoof Trimmer
Flex Cane
• Ideal for working cattle at shows, in auction rings, or off
horseback
• Made of ultra high molecular weight polymer
• 38” long with curved handle and no-slip grip
• Guaranteed: if it breaks we will replace it at no charge
#220100 – Hot Pink Flex Cane
#220101 – Blue Flex Cane
#220102 – Black Flex Cane
#220103 – Green Flex Cane
#220112 – 12 count Variety Pack (6 Pink and 2 each of Blue, Black, and Green)
Fiberglass Sorting Poles
Length
Standard White
Deluxe Green
36”
#219575
54”
#219554
#219515
60”
#219560
#219520
• Standard White
- Golf type grips
- 1/2” in diameter
• Deluxe Green
- Stronger than standard white pole
- Golf type grips
- 5/8” in diameter
31
Milking Equipment
The safest and most effective milk and colostrum collection
device available. The handheld, trigger-operated pump
snaps on a flanged plastic extraction cylinder. The Mare
Milker comes packaged with two sizes of extraction cylinders.
The #1 Small extraction cylinder accommodates small or
maiden mares, sheep and goats. The #2 Large extraction
cylinder is for older or larger mares, miniature cattle and
larger exotic animals. The extraction cylinders have been
specially designed to fit the unique shape of a mare’s udder
and have a rolled surface to prevent harm to the udder.
• One-hand operation is gentle on the mare, making it safe
and easy to milk colostrum
• Great for milking mastitis mares
• Ideal for foals who inherit a different blood type than the
dam and are at risk for neonatal isoerythrolysis
• Patented pump is manufactured with the highest quality
engineered composite materials
• The Mare Milker comes packaged with two 16 oz.
colostrum collection bottles
#277200 – Udderly EZ™ Milker
Udderly EZ™ Sheep & Goat Milker
Comes with pump, two quart collection bottles, two
extraction tubes, and two inserts (one for regular sized
sheep and goats and one for dwarf and pygmy size).
A few pulls on the trigger creates a vacuum in the bottle
and milk flow starts, filling the bottle with just a few pumps.
• Quick and easy to use – better than hand milking
• One-hand operation is easy for the operator and gentle
on the animal, making it safe and easy to collect milk and
colostrums
• Ideal for milking animals with mastitis
• Patented pump is manufactured with the highest quality
engineered composite materials
#277205 – Udderly EZ™ Sheep & Goat Milker
Udderly EZ™ Colostrum Collection Bottles
Specially designed plastic see-through 16 oz. or 1
quart colostrum collection bottles with rubber O-ring
on top to assure vacuum when attached to the Udderly
EZ™ Milker. Cap has leak proof liner seal. Ideal for
freezing colostrum and storing for future use or to
transfer colostrum to a nursing bottle for immediate use.
#277250 – Udderly EZ™ Milker Carry Bag
Handy nylon carry bag holds the Mare Milker,
spare bottles, all accessories and foaling
supplies
#277230 – Silicone Milker Inflation
Pygmy (small) size fits the #1 colostrum extraction
cylinders for use on small teats
#277235 – Silicone Milker Inflation
Goat (large) size fits the #2 colostrum extraction
cylinders for use on larger teats
32
#277265 – 1 quart bottles (case of 2)
#277275 – 1 quart bottles (case of 12)
#277260 – 16 oz. bottles (case of 2)
#277270 – 16 oz. bottles (case of 12)
Grooming Combs
5” Scotch Comb
• A high-quality comb with choice of blades. Performs many
grooming tasks
• Easy-grip wood handle
• Also ideal for horse manes and tails
#212002 – Coarse (42 teeth) Scotch Comb
#212004 – Extra coarse (21 teeth) Scotch Comb
#212006 – Fine (66 teeth) Scotch Comb
6” Standard Grooming Comb
• Unique 40-tooth design for easy grooming
• Longer teeth than Scotch comb
• Sturdy, lightweight construction
#212200 – 6” Standard Grooming, with Wood Handle
#212014 – 6” Standard Grooming, with Aluminum Handle
9” Standard Grooming Comb
• 58 needles for quick combing and superb hair separation
• Lightweight
#212100 – 9” Standard Grooming, with Wood Handle
#212009 – 9” Standard Grooming, with Aluminum Handle
9” Standard Body Fluffer Comb
• Alternating tooth design is ideal for use on thick hair coats
• Long needles fluff hairs close to body with minimum pull
and comb lines
• Short needles accentuate the guard hairs and help add
body to the coat
• Ideal with blower
#212162 – 9” Standard Body Fluffer, with Wood Handle
#212164 – 9” Standard Body Fluffer, with Aluminum Handle
Franklin 6” Comb
• Long, tapered needles with sharp points for quick combing
• Great for boning legs
• Superb hair separation
• An all time favorite of professional groomers
• Smaller, easier to handle
#212230 – Franklin 6” Comb, with Wood Handle
#212232 – Franklin 6” Comb, with Aluminum Handle
33
Franklin 9” Comb
• The Pro’s Favorite
• Long, tapered needles with sharp points for quick combing
• Superb hair separation
• Reaches deep to bring up all available hair for fuller
appearance
#212150 – Franklin 9” Comb, with Wood Handle
#212152 – Franklin 9” Comb, with Aluminum Handle
Franklin 9” Skip Tooth Comb
• Skip-tooth design glides through thickest hair to produce
quality professional look
• Reduces hair loss from grooming and working
• Adds fluff and pop
• Minimizes matting with oils, dressings
#212156 – Franklin 9” Skip Tooth, with Wood Handle
#212158 – Franklin 9” Skip Tooth, with Aluminum Handle
Nylon Dressing Comb with Wood Handle
• Comfortable, easy-grip wooden handle
• Ergonomic design
• Colorful, long-lasting combs
• Quality Stone construction
#213305 – Nylon Dressing Comb with Wood Handle
Franklin Body Fluffer Comb
• New alternating tooth design with Franklin-style sharp
needles
• Long needles fluff hair close to the body
• Short needles pop the guard hairs and help add body and
fullness to the coat
• Minimum comb lines and pull out
• Ideal with blower
#212182 – Franklin Body Fluffer, with Wood Handle
#212184 – Franklin Body Fluffer, with Aluminum Handle
34
WESTERN INSTRUMENT COMPANY
Policies and Terms of Sale
1.
2.
3.
4.
5.
6.
Minimum order $50.00. Orders less then $50.00, a $10.00 handling charge is assessed.
Ground service is pre-paid on orders of $600.00 or more in continental U.S.
All orders are shipped F.O.B. Denver, Colorado by carrier of our choice.
Payment terms are Net 30 days from invoice date.
Orders will be invoiced at price in effect on date order is received.
Prices are subject to change without notice.
Return Exchange Policies
1.
2.
3.
4.
5.
Returns must be authorized by Western Instrument Company and are subject to 20% re-stocking charge.
Authorized returns must be sent transportation prepaid.
Only original purchaser may return merchandise.
All returns will be credited to account only; no cash refund.
Products found to be defective due to materials or workmanship may be returned for repair or replacement if
returned within one year of purchase date.
6. Discontinued products cannot be returned for credit.
7. Credit issued will be based on the purchase price at the time of the original purchase.
We accept VISA & MASTERCARD
www.westerninstrument.com
T
Y
he
K of QUAL
A
E
P
IT
Since 1923
Western Instrument Company
4950 York Street
P.O. Box 16428
Denver, Colorado 80216
Ph: 800/525-2065 Fax:303/295-1923
printed in the USA
www.westerninstrument.com
05 | 09