TCS1150M - TCS Audio

TCS1150M
SPECIFICATIONS
DESCRIPTION
The TCS1150M is a full range 2-way stage monitor loudspeaker system ideally
suited for medium to large productions. The TCS1150M features a single front
loaded 15" woofer for good low/mid frequency response and a 2" exit HF compression driver mounted to 60°H x 40°V dispersion horn. The TCS1150M has a very
flat response to extend maximum gain before feedback.
APPLICATIONS
Used for permanent installations or portable touring systems.
For use in:
Live Music Clubs
Worship Centers
Concert tours
Festivals
NOMINAL AND PHYSICAL SPECS
Frequency Response
±3dB 46Hz - 18kHz
Useable Low Frequency
-10dB @40Hz
Sensitivity (1 W/1 M)
104dB
Max SPL (1 M)
130 dB SPL
Impedance
PASSIVE: 8 ohms
BI AMP
LF:
8 Ohms
HF:
8 Ohms
LF:
Power Handling
400 Wrms
800 Wprogram
80 Wrms
160 Wprogram
HF:
Dimensions:
Height
Width
Depth
Weight
16.5 inches
29 inches
22 inches
81 lbs.
Gain
Delay (milliseconds)
Polarity
LPF Shape
LPF Frequency
HPF Shape
HPF Frequency
Model Number
TCS1150M
System Configuration
2-Way, Full Range
Passive or Bi-amp
Connections
2 x Neutrik NL4
L/MF system
HF system
15” Front Loaded
2” exit 60 x 40
Constant Directivity
Cabinet Type
Wedge 50 degree
Enclosure Structure
13 ply
Baltic Birch
External Coating
Duratex
Grille Material
Foam Backed
14 Ga. powder coated
perforated steel
Replacement Parts
PROCESSOR SETTINGS
TCS1150M Low / Mid
FEATURE DATA
LF 1 ea. B&C Speakers 15PL40
HF 1 ea. B&C Speakers DE85-8
High
0dB
0.083
Normal
-10dB
0.000
Normal
L-R 24dB/Oct
50 Hz
L-R 24dB/Oct
2kHz - 2.5kHz
L-R 24dB/Oct
2kHz - 2.5kHz
N/A
N/A
EQ1 Type
EQ1 Frequency
EQ1 +/-
ARCHITECTURAL SPECIFICATIONS
The TCS1150M shall be a dedicated full range 2-way stage monitor loudspeaker system and shall consist of one (1) front loaded 15-in. LF transducer and one HF transducer coupled to a 2" exit 40° x 60° constant
directivity horn.
Frequency response shall be no more than ±3dB 46Hz - 18kHz on axis. The
loudspeaker shall be capable of producing a maximum SPL of 130dB at 1
meter. The LF section shall handle a minimum of 800 Watts with a nominal
impedance of 8 ohms. The HF section shall handle a minimum
of 160 Watts with a nominal impedance of 8 ohms.
The loudspeaker shall incorporate two (2) Neutrik NL4 connectors wired
in parallel to enable chaining of multiple loudspeakers and an internal passive crossover. The internal passive crossover shall be capable of full
range or bi-amp operation via a selector switch.
The cabinet construction shall be of 13-ply Baltic Birch plywood and shall
incorporate extensive internal bracing. The cabinet shall be of a wedge
shape and shall be finished with DuraTex˙ finish. The transducers shall be
protected with a foam backed, Powder Coat -finished 14 ga. perforated
steel grill.
EQ1 Width
Recommended processor settings are based upon the use of BSS FDS-336/334 MINIDrive
Due to continuous improvements, TCSaudio reserves the
right to change any or all specifications without notice
Spec Sheet - TCS1150Mb rev. 9/29/04
TCSAUDIO.COM
1-800-403-4484