Industry www.uwkinetics.com

INDUSTRY
Industry
UNDERWATER KI NETI CS
Underwater Kinetics
13400 Danielson Street I Poway
California I 92064 I USA
tel. 858 513 9100 I fax 858 513 9111
email: [email protected]
www.uwkinetics.com
INDUSTRY
UKE Underwater Kinetics Europe GmbH
Schwertstraße 35 I 42651 Solingen
Germany
tel. + 49 (212) 242 13-0 I fax + 49 (212) 242 13-30
email: [email protected]
INDUSTRY
Product
2
Page
Certified Industrial Lights
UK 2AAA Xenon Mini Pocket Light
4
UK 2AAA Xenon Pen Light
4
UK 2AAA Xenon Pen Light Switch
4
UK 2AAA eLED PEN I
5
UK 3AAA eLED Vizion
®
TM
5
UK 3AA eLED CPO
Front Switch or Tail Switch
6
UK 4AA Xenon Twist Bezel or
Front Switch or Tail Switch
6
UK 4AA eLED CPO
Front Switch or Tail Switch
7
UK 4AA eLED ZOOM
Front Switch or Tail Switch
7
UK 300 Xenon
8
Non-Certified Industrial Lights
UK 2AAA eLED® Mini Pocket Light
8
Nitex eLED Rechargeable
8
Helmet Mounts
9-10
Accessories and parts
11-12
I NDUSTRY
UNDE RWATER KINETICS
Contents
www.uwkinetics.com
INDUSTRY
Uncompromising
Performance
Since 1971!
At Underwater Kinetics, we are
committed to making the most
innovative and efficient products
on the market. In 1974, we were
the company that invented the
high-powered, small flashlight,
revolutionizing the world of hand
held lights. Our products continue
to deliver the most cutting-edge
technology, rugged durability, and
superior performance.
Our products are lifetime investments. Thousands of satisfied UK
customers have owned their light,
case, or hanger for over 20 years.
Even lights lost on the ocean floor
and recovered years later still work!
Only UK combines long-lasting reliability with ground-breaking design and ideas.
When you require the ultimate
in reliability and indestructible
design, count on UK.
Our certified industrial lights are the premiere tools of the trade for contractors, utility workers, water departments, maintenance crews, and anyone
else who has to battle low light environments and unpredictable conditions
as part of the job. We design our products to work whenever and wherever
you do. Straight from the toolbox, glove box, or tool belt, they
offer peak performance with every use. We are waterproof
lighting and equipment protection specialists, building each
product to endure every climate and condition imaginable.
We continue to do what we’ve always done best: innovate technology that raises the bar and blazes
the path. Smaller. Lighter. Brighter.
Better. It’s what we’re all about.
UNDERWATER KI NETI CS
After four decades, our mission
remains the same: to consistently
engineer and manufacture the
most innovative, long lasting products with our cutting-edge technology and design. Our founder, Alan
Uke, started the company out of
his dorm room at UCSD and it has
been his labor of love ever since.
INDUSTRY
www.uwkinetics.com
3
INDUSTRY
UNDE RWATER KINETICS
In
d
e hts
ifi Lig
rt al
e tri
C dus
Certified Industrial Lights – Work smarter!
High performance and ingenious design that won´t break the bank!
UK2AAA Xenon Mini Pocket Light
Features
• 1
.12 watt high brightness xenon filled lamp
• Brightest 2AAA light in its class
• Small enough for a key ring
• Hat clip and key ring included
Our Mini Pocket Light is uniquely powerful, small, and sturdy.
Weighing only 37 g, the MPL clips to almost anything so it is
always ready when you need light. It comes with a key ring and
clip for easy attachment to your hat, clothing or belt for handsfree lighting. It’s perfect for close-up work or inspection and its
xenon lamp enhances color clarity.
Part Numbers
09035 U
K2AAA Mini Pocket Light, Black,
09054
incl. 2AAA Batteries, Blister
UK2AAA Mini Pocket Light, Black, No Batteries, Bulk
09065
UK2AAA Mini Pocket Light, Safety Yellow,
incl. 2AAA Batteries, Blister
UK2AAA Mini Pocket Light, Safety Yellow,
No Batteries, Bulk
12 lumens Certification
Brightness:
Xenon
Distance seen: 35 m
73 x 27 x 19 mm
Zone 1
1.5 - 2 hrs
Burn time:
37 g
II 2G Ex ib e IIC T5
up to 1 m
2AAA Alkaline/LR3 Watertight:
09066
Specifications
FL1
12
LUMENS
2h
35m
1m
Safety Yellow / Black
Colour:
Lamp Typ:
Size:
Weight:
Batteries:
UK2AAA Xenon Pen Light
with TWIST ON and OFF switch
Features
• 1
.12 watt high brightness xenon filled lamp
• Prefocused lamp for instant narrow beam
• Glow-in-the-dark button tip
for easy location in the dark
• T
wist ON and OFF switch
• Electrically non-conductive case
• Molded pocket clip
When powerful light is needed for inspecting a small, tight
space, UK’s 2AAA Pen lights are ideal. Plus, the xenon bulb
improves visibility easing the task of distinguishing wire colors.
The penlight is compact, durable, waterproof and features a
convenient pocket clip. Its safety certification makes it a wise
choice for any workplace.
Specifications
FL1
12
LUMENS
2h
35m
1m
Safety Yellow / Black
Colour:
Lamp Typ:
Size:
Weight:
Batteries:
Part Numbers
13039 UK2AAA Pen Light, Black, incl. 2AAA Batteries, Blister
13043 UK2AAA Pen Light, Black, No Batteries, Bulk
13054 UK2AAA Pen Light, Safety Yellow, incl. 2AAA Batteries,
13055 Xenon
121 x 19 x 19 mm
42 g
2AAA Alkaline/LR3
Blister
UK2AAA Pen Light, Safety Yellow, No Batteries, Bulk
Brightness:
Distance seen:
Burn time:
Watertight:
12 lumens
35 m
1.5 - 2 hrs
up to 1 m
Certification
Zone 1
II 2G Ex ib e IIC T5
UK2AAA Xenon Pen Light S
with tail switch
I NDUSTRY
Features
4
• 1
.12 watt high brightness xenon filled lamp
• Prefocused lamp for instant narrow beam
• Rubber covered click ON and OFF
or momentary switch
• Electrically non-conductive
• Molded pocket clip
• Tough Lexon® plastic construction
Out of the shirt pocket or tool box, the 2AAA Pen Light S is
ideal for close-up inspections, night-time repairs or navigating
in the dark. Its non-conductive high impact case allows use
around circuitry or electricity. Safety certified for use in hazardous locations.
Part Numbers
13211 UK2AAA Pen Light S, Black, No Batteries, Bulk
13213 UK2AAA Pen Light S, Black, incl. 2AAA Batteries, Blister
K2AAA Pen Light S, Safety Yellow, incl. 2AAA Batteries,
U
13214
13215
Specifications
FL1
Colour:
12
LUMENS
2h
35m
1m
Safety Yellow / Black
Lamp Typ:
Size:
Weight:
Batteries:
Xenon
127 x 20 x 20 mm
42 g
2AAA Alkaline/LR3
Blister
UK2AAA Pen Light S, Safety Yellow, No Batteries, Bulk
Brightness:
Distance seen:
Burn time:
Watertight:
www.uwkinetics.com
12 lumens
35 m
1.5 - 2 hrs
up to 1 m
Certification
Zone 1
II 2G Ex ib e IIC T5
UK2AAA eLED Pen I
with tail switch
Features
• P
rotective rubber lens cover and
glare reducer
• Rubber covered click ON and
OFF or momentary switch
• Electrically non-conductive case
• Molded pocket clip positioned near the head for
easy pocket insertion
• ABS and Polycarbonate
plastic construction
Zone 1
II 2G Ex ib IIB T4 Gb
II 2D Ex ib IIIC T60°C IP6X Db
Part Numbers
K2AAA eLED Pen I, Black,
U
13339
13340 13341
13342 Our durable, waterproof UK2AAA eLED Pen I light is ideal for
close-up inspection, but bright and lightweight enough for many
other applications. Thanks to cutting-edge LED and electronic technology, it is 3 – 4 times brighter than traditional penlights. Its convenient molded pocket clip and pushbutton thumb switch make for
continuous light at a moment’s notice, even with gloves on.
incl. 2AAA Batteries, Blister
UK2AAA eLED Pen I,
Black, Bulk, No Batteries
UK2AAA eLED Pen I, Safety Yellow,
incl. 2AAA Batteries, Blister
UK2AAA eLED Pen I, Safety Yellow,
Bulk, No Batteries
Specifications
FL1
Colour:
35
LUMENS
3h
64m
Lamp Typ:
Size:
Weight:
Batteries:
1m
Safety Yellow / Black
eLED
132 x 24 x 22 mm
102 g
2AAA Alkaline/LR3
Brightness:
Distance seen:
Burn time:
Watertight:
35 lumens
64 m
3 hrs
up to 1 m
3AAA eLED® VizionTM I
Features
• P
ropriertary Compound Path
Optics (CPO) permits high
efficiency and compact size
• Thermal Recovery System
recycles heat from the LED
to warm batteries for improved performance in low
temperatures
• Waterproof design for all
weather use
• 3 selectable beam patterns Spot, Diffuse and Red Diffuse
• High and Low power settings
• L
arge push button control
switch works with heavy
gloves
• LED lamp module can be
removed from mounting
strap for use as a portable
work light
• Rotating beam angle
adjustment knob, no hinge
to break
• Available with either a non
slip rubber helmet band or
a woven band
• High impact ABS, LEXAN®
and molded rubber construction for durability
UNDERWATER KI NETI CS
Certification
INDUSTRY
In
d
e hts
ifi Lig
rt al
e tri
C dus
Certified Industrial Lights – Work smarter!
Certification
Zone 1
II 2G Ex ib IIC T4
II 2D Ex ibD 21 T55 °C
incl. 3AAA Batteries, Blister
3AAA Vizion I with Rubber Band, Safety Yellow,
incl. 3AAA Batteries, Blister
3AAA Vizion I with Woven Black Band, Black,
17020
incl. 3AAA Batteries, Blister
3AAA Vizion I with Woven Black Band, Safety Yellow,
17021
incl. 3AAA Batteries, Blister
Lamp Typ:
Specifications
60m
Size:
FL1 65
3m
LUMENS 13h
Weight:
Colour:
Safety Yellow / Black
Batteries:
17010
For superior hands-free illumination in every situation, count on the
Vizion I. Hit it, freeze it, dunk it—it will keep on working. The Vizion I
is available either with the traditional black woven band or a unique
contoured rubber band designed specifically to firmly grip your
helmet. The Vizion I is remarkably lightweight and waterproof for use
in the most challenging climates and conditions. Safety certified for
use in hazardous locations.
eLED
76 x 38 x 45 mm
110 g
3AAA Alkaline / LR6
Brightness:
Distance seen:
Burn time:
Watertight:
65 lm (high), 35 lm (low)
60 m (high), 38 m (low)
13 hrs (high), 17 hrs (low)
up to 3 m
www.uwkinetics.com
INDUSTRY
Part Numbers
AAA Vizion I with Rubber Band, Black,
3
17009
5
INDUSTRY
UNDE RWATER KINETICS
In
UK3AA eLED CPO Front Switch
Features
• P
ropriertary Compound Path Optics
(CPO) permits high efficiency and
compact size
• Thermal Recovery System
recycles heat from the LED to
warm batteries for improved
performance in low temperatures
• Push-button front switch or tail
switch switches light between
ON/OFF with continuous or
momentary action
• LED will not break when
dropped and its life expectancy
is well over 50.000 hours
• Waterproof design
for all weather use
UK3AA eLED CPO Tail Switch
• Beam produces a bright
spot with almost no
peripheral light so nearby
personnel are not affected
•Attaches to all work
helmets using UK
accessory clips
• High impact
PC/ABS/Graphite, LEXAN®
and polyurethane rubber
construction for durability
Certification
Zone 1
II 2G Ex e ib IIC T6
II 2D Ex ibD 21 T61°C
Part Numbers
10014 U
K3AA eLED CPO-ES, Front Switch, Graphite,
incl. 3AA Batteries, Blister
When our customers demanded a flashlight with superior LED
10010 UK3AA eLED CPO-ET, Tail Switch, Graphite,
incl. 3AA Batteries, Blister
technology that was also lightweight and affordable, UK constructed
10016 UK3AA eLED CPO-ES, Front Switch, Graphite,
the 3AA eLED CPO. It is the most compact light in its class, so
No Batteries, Bulk
it can go anywhere you go, via pocket, belt pouch, or helmet clip.
10012 UK3AA eLED CPO-ET, Tail Switch, Graphite,
It features an entirely waterproof design for all weather use.
No Batteries, Bulk
110 lumens
Brightness:
Lamp Typ: eLED
Specifications
92m
Distance seen: 92 m
134 x 40 x 35 mm
Size:
FL1 110
8h
3m
LUMENS
8 hrs
Burn time:
150 g
Weight:
up to 3 m
Colour:
Graphite
Watertight:
3AA Alkaline/LR6
Batteries:
UK4AA Xenon Twist Bezel
Features
• 2.1 watt high brightness
xenon filled lamp
• Rubber sheath molded over
bezel to reduce glare and
improve impact resistance
• Twist ON-and OFF switch or
Push-button tail switch or Pushbutton front switch
• Prefocused high intensity
spot beam
• Easy loading drop-in battery
compartment for quick reload
of batteries
UK4AA Xenon Front Switch
UK4AA Xenon Tail Switch
• Hydrogen scrubber
catalyst, polarized battery
contacts and 0-psi vent
minimize explosive risk
from leaking batteries
• Tough, non-corroding ABS
and polycarbonate plastic
construction
Certification
Zone 1
II 2G Ex e ib IIC T4
II 2D Ex ibD 21 T98°C
Part Numbers (incl. 4AA Batteries, Blister)
14184 UK4AA-EN Xenon, Twist Bezel, Safety Yellow
14185 UK4AA-EN Xenon, Twist Bezel, Black
I NDUSTRY
14180
6
d
e hts
ifi Lig
rt al
e tri
C dus
Certified Industrial Lights – Work smarter!
14181
Our 4AA lights are not only our best sellers, but the biggest selling certified 4AA lights in the world. The 4AA Xenon Tail Switch
matches high performance with a sleek, compact design that can
be operated with gloves. A xenon bulb provides vibrant color clarity. It is the most reliable, cost-effective flashlight you’ll ever own.
This fully accessorized worklight can be mounted on a hard hat
or fire helmet, carried in a belt pouch or used to direct traffic. A
necessity for confined space workers, utilities, municipalities,
firefighters, safety inspectors, etc.
Specifications
FL1
Colour:
38
LUMENS
4-5h
134m
3m
Safety Yellow / Black
Lamp Typ:
Size:
Weight:
Batteries:
K4AA-ES Xenon, Front Switch, Safety Yellow
U
K4AA-ES Xenon, Front Switch, Black
U
14321 UK4AA-ET Xenon, Tail Switch, Safety Yellow
14316 UK4AA-ET Xenon, Tail Switch, Black
Part Numbers (No Batteries, bulk)
14186 U
K4AA-EN Xenon, Twist Bezel, Safety Yellow
K4AA-EN Xenon, Twist Bezel, Black
14187 U
K4AA-ES Xenon, Front Switch, Safety Yellow
14182 U
14183 UK4AA-ES Xenon, Front Switch, Black
K4AA-ET Xenon, Tail Switch, Safety Yellow
14322 U
K4AA-ET Xenon, Tail Switch, Black
14318 U
Xenon
154 x 40 x 35 mm
155 g
4AA Alkaline/LR6
Brightness:
Distance seen:
Burn time:
Watertight:
www.uwkinetics.com
38 lumens
134 m
4-5 hrs
up to 3 m
UK4AA eLED CPO Front Switch
Features
• Waterproof design for
all weather use
• Beam produces a bright
spot with almost no
peripheral light so nearby
personnel are not affected
• Attaches to all work
helmets using UK
accessory clips
• High impact
PC/ABS/Graphite, LEXAN®
and polyurethane rubber
construction for durability
UK4AA eLED CPO Tail Switch
The UK4AA eLED® CPO flashlight matches powerful performance
with a sleek, compact design that can be operated with gloves. Its
LED lamp is ultra-bright, long-lasting and provides a wide beam
for superior illumination.
Part Numbers
14444 U
K4AA eLED CPO- ES, Front Switch, Graphite,
incl. 4AA Batteries, Blister
UK4AA eLED CPO- ES, Front Switch, Graphite,
No Batteries, Bulk
14436 UK4AA eLED CPO- ET, Tail Switch, Graphite,
incl. 4AA Batteries, Blister
14438 UK4AA eLED CPO- ET, Tail Switch, Graphite,
No Batteries, Bulk
Lamp Typ: eLED
Specifications
193m
157 x 40 x 35 mm
Size:
FL1 120
3m
LUMENS 4-5h
159 g
Weight:
Colour:
Graphite
Batteries: 4AA Alkaline/LR6
14446
UK4AA eLED Zoom Front Switch
UK4AA eLED Zoom Tail Switch
Brightness:
Distance seen:
Burn time:
Watertight:
120 lumens
193 m
4-5 hrs
up to 3 m
Certification
Zone 1
II 2G Ex e ib IIC T4
II 2D Ex ibD 21 T98°C
Features
• Projection Optics let you zoom
with a twist of the bezel from a
wide beam to an intense spot
• Single high-intensity 2-watt LED
lasts for thousands of hours and
will not break when dropped
• Unique eLED circuitry maintains
constant brighness for 80% of
alkaline battery life
• Rubber sheath molded over
bezel to reduce glare and
improve impact resistance
• Push-button front switch or tail
switch switches light between ON/
OFF and high/low intensity with
continuous or momentary action
• Easy loading drop-in
battery compartment for
quick reload of batteries
• Hydrogen scrubber
catalyst, polarized battery
contacts and 0-psi vent
minimize explosive risk
from leaking batteries
• Tough, electrically nonconductive, non-corroding
ABS and polycarbonate
plastic construction
• Mounts on all work
helmets with accessory
mounting clips
Part Numbers (incl. 4AA Batteries, Blister)
Part Numbers (No Batteries, bulk)
14541 U
K4AA-eLED Zoom, Front Switch, Safety Yellow
14507 UK4AA-eLED Zoom, Front Switch, Safety Yellow
K4AA-eLED Zoom, Front Switch, Black
14508 UK4AA-eLED Zoom, Front Switch, Black
14542 U
14552 UK4AA-eLED Zoom, Tail Switch, Safety Yellow
14550 UK4AA-eLED Zoom, Tail Switch, Safety Yellow
K4AA-eLED Zoom, Tail Switch, Black
14551 U
14553 UK4AA-eLED Zoom, Tail Switch, Black
77 lumens
Brightness:
Lamp Typ: eLED
Specifications
Certification
77
100m
170 x 40 x 35 mm Distance seen: 100 m
Size:
FL1
Zone 1
LUMENS
Colour:
3-4h
3m
Safety Yellow / Black
Weight:
Batteries:
175 g
4AA Alkaline/LR6
Burn time:
Watertight:
3-4 hrs
up to 3 m
II 2G Ex e ib IIC T4
II 2D Ex ibD 21 T98°C
www.uwkinetics.com
INDUSTRY
Firefighters and industrial workers all over the world trust UK’s
4AA eLED® Zoom flashlight to get the job done. It can be easily
attached to a hardhat or helmet for superior hands-free illumination. Our unique zoom feature uses patented projection optics to
create a consistent beam that can be focused from wide to narrow
by twisting the bezel.
UNDERWATER KI NETI CS
• P
ropriertary Compound Path Optics (CPO) permits high efficiency
and compact size
• Thermal Recovery System
recycles heat from the LED to
warm batteries for improved performance in low temperatures
• Push-button front switch or tail
switch switches light between
ON/OFF with continuous or
momentary action
• LED will not break when
dropped and its life expectancy
is well over 50.000 hours
INDUSTRY
In
d
e hts
ifi Lig
rt al
e tri
C dus
Certified Industrial Lights – Work smarter!
7
INDUSTRY
UNDE RWATER KINETICS
I NDUSTRY
In
d
e hts
ifi Lig
rt al
e tri
C dus
8
Certified Industrial Lights – Work smarter!
UK300 Xenon
Features
• 3
.1 watt high pressure
xenon filled lamp
• Precision machined aluminum
reflector gives bright, narrow
beam for sighting distant objects
• Attaches with unbreakable
nylon clip, lanyard or stainless
steel ring
The UK300 is a well-respected, dependable work light designed to meet the most rigorous safety requirements. It combines state of the art safety features with rugged durability to
withstand even the harshest environments. It has successfully
garnered several safety certifications around the world.
Specifications
FL1
53
LUMENS
4-5h
178m
3m
Safety Yellow / Black
Colour:
Lamp Typ:
Size:
Weight:
Batteries:
• Polarized battery holder
and hydrogen vent minimize
damage from leaky batteries
• Molded rubber glare reducing bezel cover
• N
on-conductive and corrosion
proof due to ABS, polycarbonate and Nylon construction
Part Numbers
22009 U
K300, Black, No Batteries, Box
22015 UK300, Black, No Batteries, Bulk
K300, Safety Yellow, No Batteries, Box
22016 U
22017 UK300, Safety Yellow, No Batteries, Bulk
53 lumens Certification
Brightness:
Xenon
221 x 63 x 43 mm
374 g
3C Alkaline/LR14
Distance seen: 178 m
4-5 hrs
Burn time:
up to 3 m
Watertight:
Zone 1
II 2G Ex ib IIB T5
NON - Certified Industrial Lights
Our Mini Pocket Light is
uniquely powerful, small,
and sturdy. Weighing only
36 g, the MPL clips to
almost anything so it is always ready when you need
light. It comes with a key
ring and clip for easy attachment to your hat, clothing
or belt for hands-free lighting. It’s perfect for close-up
work or inspection using
the power of its bright,
long-lasting LED lamp.
Specifications
FL1
7
LUMENS
15h
14m
9m
UK2AAA eLED® Mini Pocket Light
Features
• 15 Hours of high brigntness before fading to a low level glow
• Built-in current regulation circuit
for constant light output and long
lamp life
• Twist ON and OFF switch
• Nylon clip included for
attaching to safety glasses
or the brim of a cap
• Key ring for use as a
pocket light
• ABS and Polycarbonate
plastic construction
Part Numbers
09102 U
K2AAA eLED Mini Pocket Light, Black,
incl. 2AAA Batteries, Blister
UK2AAA eLED Mini Pocket Light, Safety Yellow,
incl. 2AAA Batteries, Blister
36 g
Distance seen: 14 m
Colour:
Safety Yellow / Black Weight:
14-15 hrs
Batteries:
Lamp Typ: eLED
2 AAA Alkaline/LR03 Burn time:
up to 9 m
Brightness: 7 lumens
Watertight:
Size:
73 x 27 x 18 mm
09117
Nitex eLED Rechargeable
Features
The Class 1 Div 2 certified Nitex® eLED® Rechargeable flashlight
is the smallest and brightest in its class. At 116 mm it is remarkably lightweight, yet fully loaded with every imaginable feature
— a rechargeable battery, push button rear switch for easy use
with gloves, and a beam you can depend on again and again.
•Prioprietary Compound Path
Optics (CPO) permits high
efficiency and compact size
• Beam pulses briefly to
indicate low battery level
• Waterproof design
for all weather use
• Beam produces a bright spot
with almost no peripheral light so
nearby personnel are not affected
• More center weighted beam won‘t
reflect off of particles in the air or
water making for better visibility
when there is fog, smoke or dust
in the air
• Large push button switch
works with heavy gloves
Part Numbers
12312 N
itex with Charger & AC Power Supply, Safety Yellow, Box
12316 N
itex with Charger & AC Power Supply, Black, Box
12319 N
itex, Safety Yellow, No Battery, no Charger
itex, Black, No Battery, no Charger
12320 N
Colour:
Safety Yellow / Black Weight:
Specifications
90
152m
Batteries:
Lamp Typ: eLED
FL1
LUMENS
4h
3m
Size:
116 x 35 x 35 mm
• Powered by a rechargeable lithium ion battery (in
an emergency, light can
be powered with 2 lithium
CR123 cells)
• Light is recharged with drop
in stand in less than 4 hours
• Charger base has adjustable
retention lock
• 12 VDC adapter available for
charger stand
• UK helmet mouting clips
easily attach the light to any
hard hat or fire helmet
102 g
Recharg. Lithium Ion
Brightness: 90 lumens
www.uwkinetics.com
Distance seen: 152 m
4 hrs
Burn time:
up to 3 m
Watertight:
INDUSTRY
Helmet mounts
• Made of steel and plastics
Features
Part Numbers
• Made of steel and plastics 14864 Adapter for original Gallet helmet mount
(that fits Gallet MS F1 S/E/A/SA/SL/RT-F2 helmets)
Features
• Made of steel and plastics
Part Numbers
14867
elmet Clip for
H
Rosenbauer Heros helmet
Part Numbers
14865
elmet Clip for Gallet A2
H
F1 S/A/SA helmets
• Made of steel and plastics
• Made of steel and plastics
Part Numbers
14866
elmet Clip for
H
DIN 14940 helmets
Part Numbers
14868 Helmet Clip for Schuberth
F200/F210 GR helmets
www.uwkinetics.com
INDUSTRY
Features
Features
UNDERWATER KI NETI CS
Features
9
INDUSTRY
UNDE RWATER KINETICS
Helmet mounts
Features
Part Numbers
14869
elmet Clip for Schuberth
H
• Made of steel and plastics
F200/F210 ST helmets
Features
• Locks in any
position for
perfect alignment
• Made from nonconductive glass
filled nylon for
super strength
• Adapters included for slotted,
vertical sided and
brim hard hats.
Also clamps
to ear muffs
Part Numbers
14819
niversal Adjustable
U
Features
Part Numbers
Helmet Clip for Gallet F2
14870 • Made of steel and plastics
X-TREM helmet
Helmet Clip
Features
Part Numbers
14871
elmet Clip for Dräger HPS
H
• Made of steel and plastics
6100/6200 helmets
e
d
lu in
-R
s
g
Helmet Clip
c
Part Numbers
Adjustable Stainless Steel
14818 O
10
• Heavy gauge
stainless steel
construction
• Large knob allows adjustment
to proper angle
• Clamps to hat
brims up to
9,5 mm thick
In
I NDUSTRY
Features
Features
Part Numbers
• Made of steel and plastics
14876 Adapter for original Gallet helmet mount
(that fits Gallet MS/SF F1 SF helmets)
www.uwkinetics.com
INDUSTRY
Accessories and parts
Vizion I Bands
17503
Part Numbers
17501 V
izion Band, Tribal Black
17503 Vizion Band, Rubber
Part Numbers
13802 Fiber Optic Attachment, 2AAA Xenon
Lamps/Reflectors and eLED Module
Nylon Pocket Clip and
Right Angle Head
14843
14845
Part Numbers
14843 N
ylon Pocket Clip (Pack of 10)
AA Right Angle Head Kit,
14845 4
09801 / 09810
4AA Xenon, 4AA eLED Zoom
Traffic Wands
14801 / 14872
14849
14877
22806
14884
Part Numbers
14877 Traffic Director Wand -4AA eLED CPO/4AA Xenon/Nitex
14884 Traffic Director Wand -3AA eLED CPO/4AA eLED Zoom
22806 Lamp/Reflector, UK300 (3.1 watt)
www.uwkinetics.com
INDUSTRY
14849
Part Numbers
09801 Lamp/Reflector, 2AAA Xenon
09810 Lamp/Reflector, 2AAA (Pack of 10 x #09801)
14801 Lamp/Reflector, 4AA Xenon
14872 L
amp/Reflector, 4AA Xenon (Pack of 10 x #14801)
14849 U
K4AA-eLED Zoom Module (Lamp), 4AA (ATEX)
UNDERWATER KI NETI CS
17501
Fiber Optic Attachment
11
INDUSTRY
UNDE RWATER KINETICS
I NDUSTRY
12
Accessories and parts
Accessories for Nitex
12811
Belt Pouches
12813
Part Numbers
14816 N
ylon Belt Pouch, 4AA/3AA
ylon Belt Pouch, Nitex
15803 N
Lamps/Reflectors are supplied on blister, all other accessories
and parts are supplied bulk or in polybag.
12836
14837
Part Numbers
12811 D
esktop Charger Dock
ower Supply for Desktop Charger
12813 P
12836 L
anyard
14837 12 VDC Vehicle Plug
Stand 12/2011
Subject to change at any time.
Errors and omissions reserved.
If you would like to get to know our complete range,
including our UltraBoxes, UltraCases, Loadout-and
TransitCases and our ArcticLites, Dive Lights, Hangers
and Knives, please request our catalogues or visit our
website: www.uwkinetics.com
UKE Underwater Kinetics Europe GmbH
Underwater Kinetics
Schwertstraße 35 I 42651 Solingen
13400 Danielson Street I Poway
Germany
California I 92064 I USA
tel. + 49 (212) 242 13-0 I fax + 49 (212) 242 13-30
tel. 858 513 9100 I fax 858 513 9111
email: [email protected]
email: [email protected]
www.uwkinetics.com
Dealer address