REPUBLIC OF BOLIVIA - Lufthansa Technik AG

REPUBLIC OF BOLIVIA
CIVIL AVIATION AUTHORITY
AIRWORTHINESS DEPARTMENT
REPAIR STATION CERTIFICATE
CENTER OF MAINTENANCE
Number::
145C/98/04/004
This certificate is granted to:
LurrHANSA TECHNIK AKTJEN6ESEll.SCHArr (LHT)
With installation in: GERMANY
Place:
HAMBURG
Address:
WEG BEIM JAGER 193
22813 HAMBURG·63
Having checked that it fulfills all the norms a1Ld regulati01ts emitted by the Bolivian
CAA related to Centers ofMaintenance ofAer01tautical material, this certificate enable
to operate as such in the following classifications :
RADIO
INSTRUMENT
ACCESSORY
LIMITED AIRFRAME
LIMITED POWERPLANT
LIMITED EMERGENCY EQUIPMENT
LIMITED SPECIALIZED SERVICES .,
~
I .
,
.I~
'- ~'?'/~
rdJ:WU. (jaJnu. «fra;;;tM1
,
P
y
OIRECTOR GENERAL OE
AERONAUTICA CIVIL
WITH LIMITATIONS THAT ARE INDICATED IN THE OPERATIONS SPECIFICATIONS
Place and Date issued: La Paz, 04/01198
-
REPUBLIC OF BOLIVIA
CIVIL AVIATION AUTHORllY
AIRWORTHINESS DEPARTMENT
Part: Maintenance
Certificate No.145C/98/04l004
Pag
J
of 7
.
REPAIR STATION OPERATIONS SPECIFICATIONS
Limitations:
The rating(s) for the Center of Maintenance with certificate Number 145C/98/07/004
is/are limited to the following:
RADIO
INSTRUMENT
ACCESSORY
CLASS 1,,2, & 3
CLASS 1, 2, 3, & 4
CLASS 1, 2, & 3
LIMITED RATINGS
AIRFRAME:
BOEING
AIRBUS
- MODEL 727, AND 737 SERIES
- MODEL A310 SERIES
POWERPLANT
PRATT & WHITNEY
GENERAL ELECTRIC
CFM INTERNATIONAL
Place and date issued: La Paz, 04/01/98
~.;'
'.- -
!!l
.. .....
.-~
.
- MODEL JT-8D SERIES
- MODEL CF6 SERIES
- MODEL CFM-56 SERIES
~';~A..f.~
~~".?'
.
REPUBLIC OF BOLIVIA
CIVIL AVIATION AUTHORITY
AIRWORTHINESS DEPARTMENT
Certificate N o.145C/98/04l004
Pag
2
of 7..•.••..
Part: Maintenance
REPAIR STATION OPERATIONS SPECIFICATIONS
(CONTINUATION)
Limitations:
The rating(s) for the Center of Maintenance with certificate Number 145C/98/04l004
is/are limited to the following:
LIMITED RATINGS: (Cont.)
SPECIALIZED SERVICES
COMPRESSED GAS CYLINDER HYDROSTATIC RETESTING- LIMITED TO
CYLINDER HYDROSTATIC RETEST, MAINTENANCE AND CHARGING OF
ALL DOT SPECIFICATION CYLINDERS, METAL SAFETY RELIEF VALVE
ASSEMBLIES AND SAFETY RELIEF DEVICES LISTED IN LUFTHANSA
TECHNIK AKTIENGESELLSCHAFT (LHT) CAPABIUTY LIST DOCUMENT
NUMBER HAM TQ-RJFAAJ03, DATED SEPTEMBER 20, 1995, AS REVISED. ALL
MAINTENANCE TO BE PERFORMED IN ACCORDANCE WITH THE
AND
APPLICABLE
MANUFACTURER
MAINTENANCE
MANUALS
COMPRESSED GAS ASSOCIATION'S INC. COMPRESSED GAS CYLINDER
PAMPHLETS, AS REVISED.
LUFTHANSA TECHNIK ANTIENGESELSCHAFT (LHT) MUST MAINTAIN THE
EQUIPMENT AND TECHNICAL CAPABILITY REQUIRED, FOR ORIGINAL
CERTIFICATION, AB AN AUTHORIZED UNITE STATES DEPARTMENT OF
TRANSPORTATION (DOT) CYLINDER RETEST FACILITY, DOT NUMBER C772, DATED APRIL 22, 1994.
ALL PRESSURE CYLINDERS MUST CONFORM TO THE STANDARDS FAA.
Place and date issued: La Paz, 04/01198
D....AC.
I!Ol!l/1A
REPUBLIC OF BOLIVIA
CIVIL AVIATION AUTHORITY
AIRWORTHINESS DEPARTMENT
Part: Maintenance
Certificate Na.145C/98/04l004
Pag
3
af 7
.
REPAIR STATION OPERATIONS SPECIFICATIONS
Limitations:
The rating(s) for the Center of Maintenance with Certificate Number 145C/98/04/004
is/are limited to the following:
LIMITED RATINGS: (Cont)
SPECIAIJZED SERVICES:
NONDESTRUCTlVE TESTING
& INSPECTION
ALL SPECIFICATIONSIPROCESSES
(AS REVISED AND FM APPROVED)
RADIOGRAPHIe
MAGNETIC PARTICLE
LIQUID PENETRANT
FLUORESCENTPENETRANT
CONTRASTDYEPENETRANT
EDDY CURRENT
HARDNESS & ELECTRICAL
CONDUCTIVITY
ULTRASONIC
SURFACE-TEMPER ETCH
- MIL-STD-453C, AMS 26350.
• ASTM.E.1444.
- AMS.E.1417, AMS 2645H, AMS 2646C.
-AMS2645H
·AMS2646C.
- ASTM-R-215
- MIL-1-1537B, AMS 2658
- AMS 2630A, AMS 2632
- AMS 2649.
ALL NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATION AND
CERTIFICATION IN ACCORDANCE WITH MIL-STD-410 OR FM APPROVED
EQUIVALENT.
Place and Date issued: La Paz, 04/01/98
REPUBLIC OF BOLIVIA
CIVIL AVIATION AUTHORI1l'
AIRWORTHINESS DEPARTMENT
Certificate No.145C/98/04/004
Part: Maintenance
Pag
4
of
7
.
REPAIR STATION OPERATIONS SPECIFICATIONS
Limitations:
The rating(s) for the Center of Maintenance with Certificate Number 145C798/04/004
is/are limited to the following:
LIMITED RATINGS: (Cont)
SPECIALIZED SERVICES: (CONT)
HEAT TREATMENT
ALUMlNUM ALLOYS
ALLOY STEELS
TITANIUM & TITANIUM
ALLOYS
• MIL-H-6988
. MIL-H·6875 H.
• MlL-H-81200 B.
SHOT PEENING: . METAL PARTS/CERAMICIBEAD
AMS2430L AS REVISED AND APPROVED BY THE FAA.
PER.MIL.S·13165C,
CHEMICAL TREATMENT ANODIZING OF ALUMINUM ALLOYS • PER MIL·A-8625F,
AMS2468D. ORAMS2472C. CHROMATE TREATMENTOF ALUMINUMALLOYS PER
MIL-C-5541 OR AMS2473E. CHROMATE TREATMENT OF MAGNESIUM ALLOYS
PER MIL-M·3171C, BLACK maDE FINISH PER, MIL-C-13924C OR AMS2485H.
PHOSPHATING PER DOD-P·16232 F, AS REVISED AND APPROVED BY THE FAA.
Place and date issued: La Paz, 04/01198
REPUBLIC OF BOLIVIA
CIVIL AVIATION AUTHORllY
AIRWORTHINESS DEPARTMENT
Certificate NO.145C/98/04J004
Pag
Q••••••• of
7.••.•••.
Part: Maintenance
REPAIR STATION OPERATIONS SPECIFICATIONS
Limitations:
The rating(s) far the Center of Maintenance with Certificate Number 145C/98704/004
is/are limited to the following:
LIMITED RATINGS: (Cont)
SPECIALIZED SERVICES: (CONT)
PLATING
CADMIUM
CHROMIUM
THINIDENSE CHROMIUM
NICKEL
ELECTROLESSNICKEL
NICKEL - CADIUM
SILVER
COOPER
TIN
ALL SPECIFICATIONSIPROCESSES
(AS REVISED AND FAA APPROVED)
• QQ-P-416, AMS2400S.
- AMS2406H, MIL·STD-1501C. 11-C-320C
-AMS 2438
- QQ-N-290A, AMS 2403J, AMS 2424D.
- MIL-C-26074E. AMS 2404C.
-AMS 2416H.
- QQ-S-365D. AMS 2410H. AMS 2411D, AMS 241F.
- MIL-C-14550B
- MIL-T-I0727C, AMS 2408F.
PLASMA FLAME SPRAY COATINGS - PER AMS 2437 B. AS REVISED AND
APPROVED BY THE FAA.
WELDING - TUNGSTEN INERT GAS (T.I.G.) PLASMA ARC AND ELECTRON BEAM
IN ACCORDANCE WITH AMS2681A OR AMS 2685C, AS REVISED AND APPROVED
BYTHEFAA.
Place and date issued: La Paz. 04/01/98
REPUBLIC OF BOLIVIA
CIVIL AVIATION AUTHORITY
AIRWORTHINESS DEPARTMENT
Part: Maintenance
Certificate No. 145C/98/04J004
Pag
e of 7 .
REPAIR STATION OPERATIONS SPECIFICATIONS
Limitations:
The rating(s) for the Center of Maintenance with Certificate Number 145C/98/04/004
is/are limited to the following;
LIMITED RATINGS: (Cont)
SPECIALIZED SERVICES: (CONT)
DIFFUSIQN COATING - PROCESSES TO BE ACCOMPLISHED IN
ACCORDANCE wrTH THE CURRENT MANUFACTURE'S MANUAL,
SPECIFICATION AND INSTRUCTIONS.
BRAZING - PER MIL·B-7883 B, AS REVISED AND APPROVED BY THE FAA.
FUSION WELDING - ALUMINUM ALLOYS, STEEL CORROSION AND HEAT
RESISTANT ALLOYS PER MIL-W-2219, AS REVISED AND APPROVED BY
THEFAA.
FULL AUTHORITY DIGITAL ELECTRONIC CONTROLS <FADEC) - EEC131-1
AND EEC 150-20.
RSS·HS001 AND RSS·RS003 MULTI-LEADED SURFACE MOUNTED DEVICE
REPLACEMENT WITR LEAD SPACES OF LESS TRAN .060 INCHES.
Place and date issued: La Paz, 04/01198
Tg]
REPUBLIC OF BOLIVIA
CIVIL AVIATION AUTHORITY
AIRWORTHINESS DEPARTMENT
Certificate N a.145C/98104l004
Pag
7
af 7
.
Part: Maintenance
REPAIR STATION OPERATIONS SPECIFICATIONS
Limitations:
The rating(s) for the Center of Maintenance with Certificate Number 145C/98/04/004
is/are limited to the following:
LIMITED RATINGS: (Cont)
SPECIALIZED SERVICES: (CONT)
FADEC (CONT)
RSS-HS002 UVPROM REPROGRAMMING
RSS-HS004 EEPROM REPROGRAMMING
WORK ON FULL AUTHORITY DIGITAL ELECTRONIC CONTROL TO BE
ACCOMPLISHED IN ACCORDANCE WITH THE PARTICULAR AIR
CARRIER'S FAA APPROVED MAINTENANCE PROGRAM AND THE
MANUFACTURER'S CURRENT TECHNICAL DATA OR OTHER PROCEDURES
ACCEPTABLE TO THE CAA OF BOLIVlA.
(xly
/
~~;!3
-
@mdti. (jaune r()iJ1antW.
OIRECTOR GENERAL OE
AERONAUTICA CIVIL
Place and date issued: La Paz, 04/01198