Drilling Rigs Rhino Speed-Star 450 Series Drilling Rigs Rhino

Comments

Transcription

Drilling Rigs Rhino Speed-Star 450 Series Drilling Rigs Rhino
Drilling Rigs
Rhino Speed-Star 450 Series
Rhino Speed-Star 450 Series model Truck or Track
Mounted Drilling Rig is a powerful and versatile
Drill Rig that can be utilised for Waterwell and
Geotechnical exploration applications. This Rig is
robust in design to create a reliable machine that can
cope with the tough conditions and comes with the
following specifications:
Capacity
• DTH 450m using 3 1/2” Rods and 5” Hammer Bit.
• RC 150m using 4” Rods
• BQ (60mm) – 1000m
• NQ (75mm) – 900m
• HQ (96mm) – 600m
• PQ (122mm) – 300m
• Rotary Mud – 300m
Rig Carrier
Truck: The standard Rhino Speed-Star is designed
to suit an 8 x 4 or 6 x 4 long wheel base Truck with
24 Ton GVM bogie drive.
Track: Rhino Speed-Star also comes as a Tracked
Crawler Unit on a 20 Ton Undercarriage.
Engine
Cummins 6BTA 5.9 litre turbo charged diesel engine
180Hp @ 2200 rpm with Funk type gearbox and
silenced enclosure.
Mast
Length of mast approximately 9m long with a minimum
of 7.5m head travel suitable for use with 6m rods.
Mast to have a 2m dump to ground
– 45º to 90º angle drilling.
Rhino Drilling & Mining Equipment Pty Ltd Unit 2/2 Commerce Court, Clontarf, QLD, 4019 Australia
• Ph: 07 3333 2225 • Fax: 07 3284 9990 • Email: [email protected] • Web: www.rhinodrill.com
Deck
Deck length approx 7.4m Long by 2.5m Wide.
Rotary Head
2 speed Head – RD-600.
Main Winch
Capacity 8,000kg, bare drum with 22mm wire rope.
Wire Line
3 Ton Wire Line Winch.
Jib Boom
250kg Hydraulic operated Jib Boom.
Pulldown
• Fine feed (hold back) control valve.
• Pullout capacity 10750kg.
• Pull down capacity 6318kg.
Hydraulics
• Rotation open loop.
• 130cc Danfoss variable displacement piston pump.
Hand Rails
Handrails and steps up to deck in compliance with mine
specifications.
Control Panel
• Swing Out Control Panel at L/H rear corner with Auger
Cage as Standard.
• Folding Drillers platform.
Other Items
The body and rig are painted in customer colours in two
pack paint.
Other Options and Configurations
Compressor Units, Acoustic Canopies, Fire
Suppression, Cyclone Systems, Rod Bins, Rod
Handlers, Breakout Rams, Rod Spinners, Rotary Heads,
Mud Pumps, Track Undercarriages and Walkways.
Packaged Finance Option
Includes Rig Truck, Support Truck, Support Trailer,
Grouting Unit, Drill Rods, Hammers & Bits
• 57cc Danfoss variable displacement piston pump.
Big Foot 650 Footclamps.
• BF650 Footclamp – all Cast Steel Body.
• Design 3000psi Rated Hydraulic Ram.
• Working Range Including BQ, NQ, HQ & PQ.
Breakout Ram
Hydraulic cylinder fitted horizontally to Breakout Table
with a 48” stilson pipe wrench with replaceable jaws.
Bean Pump
FMC Bean Pump W1122 or American equivalent with
pressure relief valve.
Jack Legs
• 4 stabiliser legs with burst valve protection.
• Extended Jack Legs – 1200 mm Stroke.
• Extra large jacking feet (300 x 300mm).
Rhino Drilling & Mining Equipment Pty Ltd Unit 2/2 Commerce Court, Clontarf, QLD, 4019 Australia
• Ph: 07 3333 2225 • Fax: 07 3284 9990 • Email: [email protected] • Web: www.rhinodrill.com