HOUSE Of KOLOR KOSMIC KANDY SYSTEM WHY

Transcription

HOUSE Of KOLOR KOSMIC KANDY SYSTEM WHY
JON'S VISION
“Before House of Kolor®, painters who
were willing to put in the time and
effort could achieve only a minimal
number of colors and effects. Some of
us wouldn’t settle for ‘good enough.’
I believed that the custom painter’s
hard work should be rewarded with
a long-lasting and durable product,
which drove me to create a custom
paint system specifically for custom
painters. Because the system could
only be as strong as its weakest link,
I designed every single product to
be the best for its application. The
result is a system that works together
and achieves the performance
requirements of the world’s most
demanding finishes. House of Kolor®
brand primers, colors, effects, and
clears bring out the best in each and
every painter when used properly as
a system. In fact, House of Kolor®
products are also easier and quicker
to spray than other paints, with far
better results. You don’t need to have
a complicated paint scheme to realize
the benefits of House of Kolor®, but
they sure are fun to look at!”
Welcome to House of Kolor® – Celebrating more than 50 Years
of Quality Kustom Finishes! This is an exciting time for the
industry and for our company. As the makers of the only true
custom paint system designed from the ground up, we never
compromise on performance and still provide great value from
our products. 50 years after pioneering the custom painting
industry, we have learned three critical truths:
• ”A chain is only as strong as its weakest link. By
incorporating normal refinish products into the House
of Kolor® system, you will weaken the entire chain.”
• ”Many custom paint jobs require up to 15 mils of film
thickness, unlike refinish work that is designed for 7
mils. This thicker film build places extreme demands
on each component of the system.”
• ”The paint materials are only about 10-20% of the
overall cost of a custom paint job, so using anything
but House of Kolor® products becomes a very costly
mistake in the long-run.”
After all these years, you can still pick out a House of Kolor®
finish. Our colors are richer, brighter, and last longer than all
the competitors, and the different layers blend together like no
paint you’ve ever seen. Plus, you will not see the longer-term
defects that other paints frequently experience.
Developed for custom painters by kustom painter Jon Kosmoski,
our values run as deep as the color in our finishes.
Test Samples of Jon's original 12 Kandys.
As Jon always says, "Quality Is The Key!"
1
NEW PRODUCTS
Kolor Shift Flakes (F74, F75 & F76)
House of Kolor® found a way to apply Kameleon® technology to a
flake’s surface, creating a completely new flake effect. The flakes give
an even crisper color shift than you’ll see in a liquid, and the geometry
of the flakes cause the colors to move through three or four phases.
They’re also very light and spray easier than your typical flake, so
when used with SG150 Intercoat Pearl and Flake Karrier, you’ll be
pleased with how they apply and thrilled with the final finish
F74 - Green to Purple
F75 - Blue to Red
F76 - Gold to Green
KOS-MATTE KLEAR (UMC35) - Matte Finish
UMC35 is the only matte (flat) clear compatible with House of
Kolor® products. What's special about this product is that it
offers great hardness, production speed and user friendliness,
in a very flexible urethane system. Adding flattening agent to
a gloss clear causes some brittleness to the system; UMC35
Kos-Matte Klear has great flexibility for long-term durability
and adhesion.
! ! ACRYLIC URETHANE KUSTOM KLEAR (UCC01) KKOSMIC
C
A
B
High Acrylic, National Rule
UCC01 is a National Rule topcoat clear that fits a "middle ground" between the UC35 and
IT's
UFC35. It has a high acrylic content for good hardness and exceptional fuel resistance just like
the UC35, but provides a slower cure for good speed and better user friendliness. Compared
to UFC35, UCC01 offers a faster cure for better production speed, with a little less flow-out.
This product is more than suitable for any national rule application, big or small, including
motorcycles - giving all painters another great option to choose from!
INTERCOAT BARRIER CLEAR (USG100) - CATALYZED
USE ONLY WHEN TOP COATING WITH URETHANE ENAMEL
Think of it as an intercoat clear on steroids, USG100 Intercoat Barrier Clear is designed specifically for use as
a highly productive and protective clear for artwork tape-outs on Shimrin® Basecoats - it prevents permanent
tape markings and protects metallic surfaces when artwork is planned, better than any intercoat on the market.
USG100 Barrier Clear also speeds up the painting process with its accelerated curing speed - guaranteed to
please the serious painter!
MUST BE TOP COATED WITH UCC01, UFC19, UFC35, UMC35 OR UC35
2
THE KOMPLETE KUSTOM SYSTEM
URETHANE ENAMEL USAGE GUIDES
Motorcycle
(tank & fenders)
Small to Average Automobile
Van or Full-Size
Truck
KUSTOM PRIMERS
KP2CF Primer
KD2000 Low VOC Primer
2 quart Kit
1 quart Kit
6 quart Kit
4 quart Kit
2 gallon Kit
2 gallon Kit
KUSTOM SEALERS
Ko-Seal® II
1 quart
3 quarts
4 quarts
KOLOR COATS & KANDIES
BC25 Black or BC26 White
UB04 or UFB04 Jet Set Black **
UFB06 Kosmos Red **
Designer Pearls (PBC)
Graphic Kolors (SG)
1 quart
1 quart
1 quart
1 - 2 quarts
1 - 2 quarts
1 gallon
4 quarts
4 quarts
6 quarts
6 quarts
6 quarts
6 - 8 quarts
6 - 8 quarts
8 - 10 quarts
8 - 10 quarts
Neons (NE)
Metallics (BC or FBC)
MetajulsTM (MBC)
1 - 2 quarts
1 - 2 quarts
6 quarts
5 - 6 quarts
8 - 10 quarts
8 quarts
1 quarts
1 - 2 quarts
4 - 5 quarts
6 - 8 quarts
6 - 8 quarts
8 quarts
1 quart
1 - 2 quarts
2 quarts
6 quarts
2 - 3 quarts
8 - 10 quarts
Universal Pearls (PC)
Marblizer® (MB)
Kandy Basecoats (KBC)
Kameleon® (KF)
1 quart
3 quarts
1 - 2 quarts
4 - 6 quarts
8 oz. of Koncentrate plus 2 quarts clear = 2 quarts Kandy
Kosmic Kandy (UK) **
Kandy Koncentrate (KK)
4 quarts
2 gallons
Note: Neons require BC26 White, KS10 White or KS210 White for Ground Coat. Marblizer® requires a Base Coat.
Kandy Koncentrate requires additional clear. See Technical Manual.
KUSTOM KLEARS
UC35 Kosmic Acrylic Urethane Klear® **
UFC35 Kosmic Urethane Flo-Klear **
UFC19 Urethane Komply Klear® II**
UMC35 Kos-Matte Klear **
UCC01 Kosmic Acrylic Urethane Kustom Klear **
1 - 2 quarts
1 - 2 quarts
3 - 4 quarts
3 - 4 quarts
6 - 8 quarts
6 - 8 quarts
1 - 2 quarts
1 - 2 quarts
3 - 4 quarts
3 - 4 quarts
6 - 8 quarts
6 - 8 quarts
1 - 2 quarts
3 - 4 quarts
6 - 8 quarts
NOTE: UB04, UFB04, and UFB06 DO NOT require a Clear Coat. If artwork is planned over Shimrin Pearl or Metallic Bases,
add 1-2 quarts of SG100 Intercoat Clear. See Technical Manual.
®
REDUCER
Kosmic Reducer
1 quart reducer per 2 quart of paint
CATALYST
Catalyst
1 pint per quart of paint (required only with products whose code begins with "U & KO-SEAL®")
** Requires Catalyst
These are approximates only; spray techniques, gun distance and gun size can modify these numbers.
3
For more information visit us at www.houseofkolor.com
Before you Paint…
Planning is the key to a show-quality paint job. You’ve got to think about each component, how you’re
going to lay down each coat, how the colors will work together, and always check the technical guidelines!
When you stick with the House of Kolor® kustom paint system, we do most of the work for you, so the
application goes smoothly and the quality lasts for the long term. Here’s all the basics you need to know:
•Use our heavy-duty, kustom grade epoxy primers! You’re entering the world of high-build kustom
painting, and even the best refinish primer can’t stand up to the challenge. House of Kolor®
primers are the foundation of a high-build kustom paint job. If you’ve already primed the surface
with something else, sand it off and re-prime it with House of Kolor®. When all is said and done,
you’ll be glad you did. By the way, our primers are direct to metal, plastics and fiberglass - for all
custom painting applications.
•For maximum adhesion between primer and basecoat, use the House of Kolor® colored sealers
(Ko-Seal® II)! These rugged products not only add years to your paint job, but they give you three
color options to reduce the amount of basecoat required for coverage. Use the white, black, or
metallic silver sealer, or tint the metallic silver or white with kandy koncentrate to approximate any
basecoat.
•Use House of Kolor® topcoat clears – properly! House of Kolor® uses special solvents in our
products – solvents that bite deep into the surrounding coats. Only House of Kolor® premium
urethane clearcoats allow those solvents to bite into them, whereas competitors’ clears do not
achieve the adhesion with our solvents and will flake off (delaminate) quickly. Our UC35 and new
UCC01 products provide a harder finish to provide stability and protection over the thicker color
coats. Our UFC35 and UFC19 product provide the maximum flow-out and user friendliness. For
a flat (or matte) finish, try our new UMC35 Kos-Matte Klear!
• Interested in a Kandy Paint Job? Read our Section on the Kosmic Kandy System before visiting
your jobber or painter!
And always…
•Don’t be a hero - follow the House of Kolor® Application Recommendations! We want you to have
the best finish possible, so if House of Kolor® recommends three coats of pearl with 75% overspray,
then you should stick to that recommendation! Our technical manual is available for download
at www.houseofkolor.com, or you can pick one up at your local stocking jobber. It’s a great tool
that’s easy to follow, for worry-free painting!
2007 Custom Assembled "Finicky" Motorcycle
Fades on frame: UK,04, UK08,UK10, UK11, UK12, UK15 & UK16 over BC02 & BC03
Painted by: Ron Finch of Pontiac, MI
4
THE KOMPLETE KUSTOM SYSTEM
PREPARATION WORK
AEROSOL CLEANER (KCA100)
KCA100 Aerosol Surface Cleaner dissolves surface contaminants rapidly. With its convenient aerosol
application, KCA100 increases productivity.
BENEFITS:
• Dissolves a wide variety of organic contaminants.
• Works longer to dissolve contaminants.
• Convenient ready-to-use application.
• Nationwide compliance.
WAX & GREASE REMOVER (KC10)
KC10 Wax & Grease Remover removes grease, wax, silicone, adhesives, tar, tree sap, insects and dirt. KC10
is a quick flashing product designed to speed initial surface prep before sanding and body work.
POST SANDING CLEANER (KC20)
KC20 Post Sanding Cleaner removes sanding residue as well as dirt and light contaminants, such as hand
oil. KC20 is designed for use after KC10 and final surface prep.
WHY USE KUSTOM PRIMERS?
The primer is the foundation of any custom paint job.
Because of the unique chemistry of our epoxies, our
primers offer:
• Direct to metal, plastics, and fiberglass.
• Extreme flexibility that allows the finish to expand and
contract when the metal is heated or cooled, and will not
crack even when seriously dented.
• Tenacious adhesion that resists chipping from rock
bruising or door dings.
• Fill up to 24 grit scratches and offers outstanding
sandability.
• Complete blockage of body filler bleed-through at 2 mils
of film build.
• Very high film build and easy sanding to improve
productivity.
No primer used in collision repair offers all of these
benefits!
1938 Ford Coupe
Color: PBC64 over KD2000 Primer & KS10 Sealer
Painted by: Mike Willey and Yogi Snider of Claremore, OK
KUSTOM PRIM ERS
KWIKURE 2-PART EPOXY PRIMER/SURFACER (KP2CF - PARTS A & B)
KP2CF Epoxy Primer Surfacer is designed to work over properly prepared bare aluminum, fiberglass,
galvanized steel, OE finishes and some woods and plastics. It may be applied to repair areas for
fast filling of touch ups as well. KP2CF’s good corrosion resistance, flexibility, tenacious adhesion to
substrates, fast build, and ease of sanding, wet or dry, makes it a logical choice for the foundation of
a long lasting paint job. This is a two part kit, you will need to order one part A and one part B for a
complete kit.
DIRECT TO METAL PRIMER (KD2000 & KDA2000)
KD2000 Direct to Metal Primer has been formulated with a hybrid of epoxy and acrylic polymers,
which provide excellent adhesion, good corrosion resistance, flexibility, productive dry times, and ease
of sanding. These primers emit very low amounts of Volatile Organic Compounds (VOCs), Hazardous
Air Polluting Solvents (HAPS), and contain no isocyanates (CA compliant primer). KD2000 may be
applied to properly cleaned and sanded aluminum, steel, galvanized steel, OE finishes, sand blasted
steel, fiberglass and SMC. This is a two part kit, you will need to order KD2000 and KDA2000.
5
SEALERS ARE OPTIONAL, RIGHT?
WRONG!
In custom painting, sealers ARE NOT an option and will save you time and money! They perform four critical functions:
• Improve the adhesion between the substrate and the base coat.
• Greatly improve the color holdout of your finish.
• Reduce the amount of base needed to achieve full coverage (see below).
• Prevent solvent absorption into the primer.
Our White and Silver Metallic sealers can be
tinted with our Kandy Koncentrates to
create hundreds of custom ground
coat colors! That means you can
reduce the number of base coats
required and achieve an
even “deeper” looking finish!
2000 Ford F-150 Lightning
Bodyfade: PBC30, PBC31,PBC32 & PBC64
Painted by: Robert "PEF" Peffley and Mike Lavallee of Snohomish, WA
SEALERS
KO-SEAL® II PRIMER SEALER (KS SERIES)
Ko-Seal® II is a two-component acrylic urethane primer sealer. Available in black, white and silver
metallic colors. When tinted with our Kandy Koncentrates, they make a perfect ground coat color
for many effects. This product meets VOC requirements nation wide. Sealers are a must when doing
custom finishing.
BLEED CHECK SEALER (SBS)
Bleed Check is a two-component acrylic urethane sealer designed to stop the bleed through of products.
Bleed Check will stop bleeding colors from interfering with artwork. SBS uses graphite as an
active ingredient. As a result, SBS appears black in color. AX01 IS REQUIRED FOR THIS PRODUCT.
The following House of Kolor® products have a tendency to bleed: KBC05, KBC10, KBC13,
KK05, KK10, KK13, UK05, UK10 and UK13. We recommend using Bleed Check over the above
products to protect artwork.
BReaking the House of Kolor® MythS
• "House of Kolor® Is Difficult To Use" - House of Kolor® was designed with the custom painter in mind. Most painters who find the
products difficult to use have not taken the time to read the technical information provided about our products. Our Technical Manual
provides easy to follow explanation of how our products work and how they should be applied. Many painters who find the system
difficult to use are making it more complicated than it has to be, by mixing systems that are not designed to work together or applying
House of Kolor® in manners other than how the Tech Manual suggests. All paint jobs require a little bit of planning, which is made
easier with the product catalog and our Technical Manual, both of which we give away for free. Even novice custom painters who
follow our directions often comment on how much easier the system is to use than the competition.
• "House of Kolor® Is Hard To Get" - Virtually every paint distributor worldwide can get House of Kolor® Products within a day or two.
We also have Premier Jobbers who are distributors required to have a minimum inventory level in each store at all times. You can
find a directory of Premier Jobbers at our web site under Contact Us / Distributors. There are many jobbers who sell House of Kolor®
in on-line stores and ship them to your door. House of Kolor® is the number one custom paint, we are usually the easiest of all the
custom paint products to find.
• "House of Kolor® Doesn't Hold Up Well" - When customers are unhappy with an outcome, the vast majority of the incidents are due
to using House of Kolor® basecoats, kandies, and effects mixed with other companies' primers, sealers, and clears. The remainder
is due to improper application methods. Using collision repair products under or over House of Kolor® will cause problems because
they are not truly custom grade. For the investment you are making for this level of paint job, going outside the House of Kolor®
kustom paint system just doesn't make good sense. Make sure that you or your painters are using the whole system, not just the
colors!
For more information visit us at www.houseofkolor.com
6
ALL CUSTOM PAINTS ARE NOT CREATED EQUAL!
Our Shimrin® Basecoat products are co-polymered urethane systems designed to behave like a lacquer while offering the
performance of a urethane. The best of both worlds!
• Made with only the highest-graded metallics and pearls for exceptional brilliance.
• Use organic pigments instead of the oxides normally used in collision repair systems; our pigments produce much cleaner
more vibrant colors.
• Often achieve two to three -coat coverage when using the correct ground coat color.
• Extremely fast drying, reducing time between coats or taping for graphic.
• Special chemistry: self-orienting metallics and pearls don’t streak or blotch, and keep their orientation when cleared.
SHIM RIN ® BASECOAT
KANDY BASECOATS (KBC SERIES)
Kandy Basecoats are a combination of Kandies and Pearls into a Shimrin® Universal Basecoat. They feature low film build, require
fewer coats, are easy to apply, and touch ups are easier than ever. Available in the same great colors as our regular Kandies.
GLAMOUR METALLIC (BC SERIES) & FINE METALLIC (FBC SERIES)
Our Glamour Metallic or Fine Matallic bases may be cleared for a final finish, or used as a basecoat underneath Kandies. Due to
their unique chemistry they may be top- coated with either acrylic lacquer or urethane enamel topcoat.
DESIGNER PEARLS & BLACK PEARLS (PBC SERIES)
Shimrin® Designer Pearls feature ultra clean organic pigments for extreme brightness and clarity. They are universal basecoats that
may be cleared for a final finish, or used as a basecoat for Kandies.
GRAPHIC KOLORS (SG SERIES) & SOLID BASES (BC25 & BC26)
Shimrin® Graphic Kolors (SG), BC25 and BC26 feature ultra clean organic pigments for incredible brightness and clarity. They are
universal basecoat solid (non-metallic) colors that may be cleared for a final finish, or used as a ground coat under most pearls and
other Shimrin® Bases.
METAJULSTM METALLIC BASECOATS (MBC SERIES)
Shimrin® MetajulsTM Metallic Basecoats are the largest of our metallic basecoats, offering exceptional sparkle and brightness.
Available in three unique colors and now three different grain sizes. They are an excellent choice as a basecoat for Kandy paint
jobs, providing exceptional sparkle in sunlight, or can be clear-coated for a final finish.
KAMELEON® KOLORS (KF SERIES)
Kameleon® Kolors are revolutionary basecoats that change color depending on the angle from which they are viewed. Rounded,
curved surfaces and sharp angles will highlight the uniqueness of Kameleon® Kolors. Kameleon® Kolors are as easy to apply as our
Shimrin® Designer Pearl basecoats, and must be clear-coated.
NEON (NE SERIES)
Neons are universal basecoats that may simply be cleared for a final finish.
IMPORTANT NOTE: USE WITH DISCRETION! Neons have limited light-fastness in the sun. Neons are not recommended for overall refinishing
or where long life is a requirement.
ARTISTIC EFFECT S
MARBLIZERTM (MB SERIES)
MarblizerTM Artistic Bases offer you an exciting paint finish. A wide range of effects can be achieved using this unique coating,
from a deep marble appearance to a snakeskin appearance. Many other effects are open to the innovative painter. Use two colors
for increased depth or apply Kandies for awesome effects. IMPORTANT NOTE: must be coated with sg100 before topcoated with an
urethane Klear.
KOSMIC KROME® (MC SERIES)
Kosmic Krome® represents the application of revolutionary chemistry where platelets of metal can be created at smaller, more
uniform sizes than ever before. Kosmic Krome® custom metals are one of the latest effects for custom painting. Not intended to be
a total finish; rather as an additional tool for Graphics, striping, or airbrush projects that need something unique. These finishes
offer kustom painters effects previously unavailable and open a wide array of possibilities for new colors when combined with other
effect colors currently available.
KANDY KONCENTRATES (KK SERIES)
Kandy Koncentrates are used to enhance any of our Kosmic Kolor® Urethane Enamel. Use factory packaged Kandys for overall
refinishing and for maximum longevity.
BENEFITS:
• Get you through the tough stuff fast, saving time and material.
• Great for touch ups.
• Tint Kandies & Shimrin® Bases for additional colors.
• Strengthen Kandys for faster coverage on frames, doorjambs, under trunk and hood areas, etc.
• May be added to SG100 Intercoat Clear for multi-colored Kandy tape outs with minimal build.
7
For more information visit us at www.houseofkolor.com
KOSMIC KOLOR ® URETHANE SYS TEM
SOLID COLORS (UB SERIES & UFB SERIES)
Kosmic Kolor® urethane enamel Solid Colors are single-stage urethane finishes that offer the deepest black
and cleanest red available.
KANDY (UK SERIES) - THE TRUE URETHANE KANDY
Kosmic Kolor® urethane enamel Kandies offer the deepest, cleanest and richest colors In the Industry. They may be
applied over any of our Shimrin® Universal Basecoats. House of Kolor Urethane Kandys are still the hands-down
ultimate in custom finishes.
House of Kolor Kosmic Kandy System
• When Should You Use the “True” UK Urethane Kandy?
As a primary vehicle finish, for the absolute best in clarity, depth, light fastness, and material flexibility and
durability. And, when you want a finish 6 coats in depth.
• When Should You Use the Kandy Koncentrates?
As artwork kandy or touch-up kandy when mixed with SG100 (3-coat build) or topcoat clear (3-4 coat
build), or when tinting other UK, Shimrin, or Ko-Seal products. Also good for use on interior or underside
body applications
• When Should You Use the Kandy Basecoats?
When you prefer the color, or when a lower-build, easier-to-spray alternative is what you’re looking for. It’s
just a matter of preference!
Why is this the case?
• House of Kolor Urethane Kandys Are “True” Kandy Paints
The trend these days is shifting towards using Kandy Koncentrates with House of
Kolor topcoat clears to create a primary kandy mix. In fact, that’s the only way
competitors try to compete with a candy alternative. For the primary paint job on
a vehicle, House of Kolor discourages this technique – here’s why! A Kandy is a
transparent color coat shown over a metallic basecoat. The quality of a kandy finish
depends on a number of factors, including:
- depth of the finish
- clarity of the color
- cleanliness (or absence of blotching) in the sprayed finish
- light fastness of the color (resistance to fading from sunlight)
- flexibility and durability of the high-build finish
- quality and reflectivity of the metallic basecoat underneath
• House of Kolor Urethane Kandys (UK Series) Are More Than
Just Dye and Clearcoat!!
Only a dedicated system and a well-tailored product can put all of these attributes
together in one package. The House of Kolor Urethane Kandy (UK) Series stands
alone at the top by offering the cleanest and finest colors; a formulation that allows 6
coats of film depth; special UV sunscreen directly in the UK product; and, the highest
quality urethane chemisty to provide the flexibility and adhesion to last for decades.
• What are Kandy Koncentrates (KK)?
KK’s are concentrated organic kandy pigments, but we recommend them for different
purposes than the UK Kandys: first, KK’s are great for tinting. Second, they make
excellent artwork-grade kandys (but not quite as suitable for use as a primary candy
finish for a vehicle). We intend the KK series for use in tinting UK Kandys, Ko-Seal,
or any Shimrins colors. Or, you can mix Kandy Koncentrate with House of Kolor
topcoat clear to create a transparent 3-stage color coat that’s great for artwork,
touch-ups, and inside body coats. For primary paint jobs on a vehicle, where
weathering and exposure to sunlight is highest, we strongly urge the use of our
packaged UK Kandys instead of mixing KK with clear.
• What are Kandy Basecoats (KBC)?
KBC’s are Kandy colors in a chemistry that behaves more like the 3-stage PBC pearls.
Some people prefer the ease of use of a KBC pearl-like Kandy Basecoat and will
trade off some of the depth of a UK Kandy for the ease of use of a KBC. KBC’s are
also great for 2-tones and artwork, resulting in a minimal leading edge when used
beside another KBC, PBC, or other 3-stage colors.
• What can you put underneath a UK or KK/Clear Kandy to
Make It Stand Out?
House of Kolor offers standard flake metallics (BC Series), fine-flake metallics of the
same colors (FBC series), Metajuls 3-Stage Metallics in three transparent colors, in
Fine (40 micron), Standard (90 micron), and Coarse (130 micron) flake sizes. You
can also lay down dry flake underneath a kandy finish. Try two-toning or fading the
basecoats underneath the kandy. Or you can ghost some flames and artwork.
8
T OPCOAT CLEARS
HOUSE OF KOLOR® TOPCOAT CLEARS ARE THE ONLY ONES THAT ARE:
• FULLY CUSTOMIZED FOR YOUR APPLICATION.
• LOADED WITH THE MAXIMUM UV PROTECTION.
• COMPATIBLE WITH THE HOUSE OF KOLOR® SOLVENTS AND HIGH-BUILD SYSTEM.
KOSMIC ACRYLIC URETHANE KLEAR (UC35) - High Acrylic
UC35 may be used to topcoat any urethane enamel finish, including all Shimrin® Basecoats. UC35 features excellent gloss and
D.O.I. (Distinctness of Image). It has good chemical and water resistance and excellent weathering and ultraviolet resistance.
UC35 dries fast and hard and may be color-sanded and buffed the next day. UC35 is medium solids, and has the same
application properties of conventional clear coats.
KOSMIC URETHANE FLO-KLEAR (UFC35) - Low Acrylic
UFC35 may be used to topcoat any of our Kosmic Kolor® urethane or polyurethane enamel finishes, or any of our Shimrin®
Basecoats. UFC35 features excellent flowout for better D.O.I. (Distinctness of Image), ultra-high gloss, good chemical and water
resistance, good abrasion and stone bruise resistance, is extremely flexible and polishes and buffs easily.
KOSMIC ACRYLIC URETHANE KUSTOM KLEAR (UCC01) - High Acrylic, National Rule
UCC01 is a National Rule topcoat clear that fits a "middle ground" between the UC35 and UFC35. It has a high acrylic content
for good hardness and exceptional fuel resistance just like the UC35, but provides a slower cure for good speed and better user
friendliness. Compared to UFC35, UCC01 offers a faster cure for better production speed, with a little less flow-out. This product
is more than suitable for any national rule application, big or small, including motorcycles - giving all painters another great option
to choose from!
KOS-MATTE KLEAR (UMC35) - Matte Finish
UMC35 is the only matte (flat) clear compatible with House of Kolor® products. What's special about this product is that it offers
great hardness, production speed and user friendliness, in a very flexible urethane system. Adding flattening agent to a gloss clear
causes some brittleness to the system; UMC35 Kos-Matte Klear has great flexiibility for long-term durability and adhesion.
URETHANE KOMPLY KLEAR® II (UFC19) - 1.9 VOC Low Acrylic
UFC19 Komply Klear® II is a 1.9 VOC polyurethane clear coat. UFC19 buffs easily the next day, delivers the low VOC needed for
air quality regulations, and yet handles like conventional clear coats. Komply Klear® II may be used to topcoat any of our Kosmic
Kolor urethane or polyurethane enamel finishes, or any of our Shimrin® Basecoats. UFC19 features excellent gloss, long flow out,
very good D.O.I. (Distinctness of Image), and good chemical and water resistance. UFC19 has excellent weathering and ultraviolet
resistance, and easily color sands and polishes from 24 up to 72 hours.
SUNSCREEN CLEAR (SC01)
SC01 Sunscreen Clear contains the maximum allowable amounts of UV absorber to protect your paint job from the most damaging
rays of the sun. A must for acrylic lacquer finishes. We have seen lacquer Kandy finishes 12 to 14 years old and still looking great
when SC01 is used as a topcoat clear. SC01 is excellent for colored pearls, too.
CAUTION: Do not use SC01 over whites or very light colors, as a slight yellowing is possible due to the ingredients used for UV
protection.
WE'VE GOT THE PRODUCT FOR YOUR APPLICATION!
House of Kolor® offers topcoat clears for your specific application:
• UC35 has a high acrylic content that offers the fastest curing, maximum hardness, and excellent fuel resistance. This is an excellent
choice for motorcycles, jet skis or other small objects.
• UFC35 has a lower acrylic content and offers maximum flow-out and user-friendliness from a slower cure. This is a good choice for
full-size cars, trucks, and other larger vehicles or objects.
• UCC01 has good production speed and fuel resistance for motorcycles and smaller objects, with more user-friendliness than the UC35.
Flow-out is high, but not as high as UFC35, so it works for large
applications where a faster production speed than
UFC35 is desired.
• UFC19 offers similar characteristics as the UFC35 clear
but in a 1.9 VOC package.
• UMC35 has a low acrylic content that offers excellent
fuel resistance and fast curing, yielding a durable and
flexible matte finish.
• SC01 is a high acrylic lacquer clear with the maximum
allowable of UV absorbers.
9
All Six clears use a unique chemistry, allowing build-up in
excess of 15 mils without cracking, splitting, or delaminating.
Collision repair paint will fail well below this level! What many
people do not know is that some organic pigments are sensitive
to UV rays, and that House of Kolor® Klears contain the highest
levels of a very unique UV screening agent to prevent fading
of the organic pigments. Competitive clears will let your colors
fade! House of Kolor® is a system, and that’s why our clears
are critical to a long-lasting custom paint job!
INTERCOAT CLEAR
INTERCOAT CLEAR (SG100)
Custom Painted Surfboard
By Mike "WET" Willey of Claremore, OK
USE ONLY WHEN TOP COATING WITH URETHANE ENAMEL
SG100 Intercoat Clear is the classic, multi-use House of Kolor intercoat clear. Designed
for use as a protective clear for artwork tape-outs on Shimrin® Basecoats, to blend
Shimrin® Pearl and Metallic Basecoats and to mix Pearl and Kandy Koncentrates, or to
act as a carrier for spraying dry pearls, flakes, and powders. This product is also a good
choice to reduce Shimrin® Basecoats for touch-ups and blends.
MUST BE TOP COATED WITH UCC01, UFC19, UFC35, UMC35 OR UC35
INTERCOAT BARRIER CLEAR (USG100) - CATALYZED
USE ONLY WHEN TOP COATING WITH URETHANE ENAMEL
Think of it as an intercoat clear on steroids, USG100 Intercoat Barrier Clear is designed
specifically for use as a highly productive and protective clear for artwork tape-outs on
Shimrin® Basecoats - it prevents permanent tape markings and protects metallic surfaces
when artwork is planned, better than any intercoat on the market. USG100 Barrier
Clear also speeds up the painting process with its accelerated curing speed - guaranteed
to please the serious painter!
MUST BE TOP COATED WITH UCC01, UFC19, UFC35, UMC35 OR UC35
INTERCOAT PEARL & FLAKE KARRIER (SG150)
SG150 Intercoat Pearl & Flake Karrier is an innovative mid-coat material designed
specifically for use as a carrier with Pearls, Flakes, and other dry products offered in the
House of Kolor® product line. SG150 features advanced chemistry that encapsulates
pearl and flake particles, causing them to self-orient and “lock” in place. This action
will vastly improve spray characteristics and finish quality. SG150 dries to a very clear,
high quality finish, but is only intended for use as an intercoat.
BENEFITS:
• Greatly reduces or eliminates settling of pearls and flakes in the spray gun
•Locks dry particles into place so they won’t move when top-coated
• Dries crystal clear and allows the brilliance of the pearls and flakes to shine through
CATALYST
CATALYST (KU100)
This product is for use only in our UK Kandys, UB & UFB products. Due to Its unique
chemistry, KU100 should never be substituted with other brand catalysts.
EXEMPT CATALYST (KU150)
This product is for use only In our Ko-Seal® II, UC & UFC Klears. Due to its unique
chemistry, KU150 should never be substituted with other brand catalysts.
FLOW EXEMPT CATALYST (KU151)
This product must be pre-mixed with other products before use. KU151 is a multi-purpose
catalyst for urethane finishes, designed for high temperatures, humid conditions, and
improves the flow.
REDUC ERS & THINNERS
REDUCERS (RU310, RU311, RU312, RU313 & RU300 VOC EXEMPT)
Our Kosmic Reducers - RU310 Fast Dry, RU311 Medium Dry, RU312 Slow Dry, RU313 Very Slow Dry and
RU300 VOC exempt (Fast to Medium) - are the only reducers we recommend for use with our House of
Kolor® System.
THINNERS (RU101 & RU202)
Our Kustom Thinners RU101 HI-Gloss and RU202 Fast Dry are the finest thinners you can buy at any
price. The thinner carries the paint to the surface, then evaporates from the paint film, thus how the thinner
evaporates will determine the flow, tack free time, consistency, shrinkage, leveling, dry time, tape time and
final gloss. A subtle but valuable part of the system!
RETARDER (RU315)
Designed for the Kosmic Kolor® Urethane system to retard dry time in situations where this is deemed
necessary, such as force drying. May be added to faster reducers to slow their dry time in emergency
situations.
KRATOR ELIMINATOR (KE170)
An additive that corrects fisheye or crater defects. Works with lacquer, urethane, polyurethane, acrylic
urethane, acrylic enamel, and other polymer coatings. A must have product for your paint shop.
CAUTION: May not correct major silicone contamination.
10
PEARLS, OPALS, & FLA KES
DRY PEARLS (DP SERIES) & DRY SPARKLE PEARLS (DR SERIES)
Our Pearl Concentrates are available in dry form and may be added to any of our urethane enamels. They may also be added
to first coats of Kandies when spraying over solid color bases. Design your own, one-of-a-kind custom paint.
ICE PEARLS (IP SERIES)
Ice Pearl glass pearl pigments go beyond traditional pearls in brightness of color, transparency, and reflectivity. They have
brightness and sparkle under sunlight conditions. Ice Pearl may be used over any of our Shimrin® Universal Basecoats, Kandys,
Klears, or custom bases. Giving a brilliant glitter effect, Ice Pearl provides an excellent base for Kandy finishes. Blends of Ice Pearl
pigments give an accurate multi-color effect, showing the individual colors of the pearl used in the blend. Ice Pearl gives the
custom painter additional creativity to design “one of a kind” custom finishes.
KAMELEON® OPALS (KOP SERIES)
Kameleon® Opals represent some of the latest advancements in pearlescent technology allowing radical color shift from different
viewing angles. These products are available as easy-to-disperse powders that can be added to clears, pearl basecoats, and
Marblizer® to create dazzling effects and exciting new colors. Kameleon® Opals are sure to add exciting new effects to your
kustom coatings palette.
KAMELEON® PEARLS (KPF SERIES)
Kameleon® Pearls are unique color-changing pigments available in 5 dazzling colors and two particle sizes, Standard (90
microns) and Fine (40 microns). They are supplied in a dry form that may be added to SG100 Intercoat Clear, SG150 Intercoat
Karrier, Sunscreen Clear (SC01), urethane clears, or MB00 for dramatic, eye catching art work. The color changing effects of
Kameleon® Pearls are just as dramatic as the Kameleon® Basecoats.
KOSMIC PEARLS (KDP SERIES)
KOSMIC PEARLS MUST BE VIEWED IN SUNLIGHT TO SEE MAXIMUM EFFECT.
Our Pearl Concentrates are available in dry form and may be added to any of our urethane enamels. They may also be added
to first coats of Kandys when shooting over solid color bases. Kosmic Pearls feature increased reflectivity, brightness and
sparkle. Kosmic Pearls' high intensities make them a great choice to use over white bases or solid colors for eye-catching effects
in sunlight.
FLAKES (F SERIES, MF SERIES & UMF SERIES)
Flakes may be used over any of our Shimrin® Universal Basecoats, Kandies, Klears or custom bases. Built from ultra-thin polyester,
our flakes are the lightest and easiest to use. The mini and ultra-mini flakes have the brilliance of much larger flake, combining
the ultimate in a flake appearance and ease of use. Refer to technical manual for specific flake sizes.
We offer flakes in three sizes:
(F) - 1/64 inch Flake (the most coarse and brilliant)
(MF) - Mini Flake (comes on fast with greatly reduced surface roughness)
(UMF) - Ultra-Mini Flake (3 sizes, easy to apply and smooths out with topcoats)
TRANSLUCENT FLAKES (F SERIES)
Built from ultra-thin polyester, our translucent flakes are the lightest and easiest to use. They are available in four retro-translucent
colors and create dazzling effects over any base color. The translucent nature of these flakes allows for use over a greater range
of basecoat colors (including white), resulting in a greater shift effect.
KOSMIC LONG-GLOTM (KLG SERIES)
This product is designed to provide a glow-in-the-dark effect. Depending on use and sun exposure, light fastness on some colors
will be limited. We recommend using Kosmic Long-GloTM with discretion. Even though the color may change with time and
exposure, the glow-in-the-dark feature remains for a long time.
IMPORTANT NOTE - KOSMIC LONG-GLOTM
IS NOT RECOMMENDED FOR OVERALL REFINISHING.
11
’72 Buick LeSabre painted
with Lime Gold Kandy over Planet Green basecoat.
For more information visit us at www.houseofkolor.com
SPEC IALTY APPL ICATION PRODUCTS
ADHERETO® (AP01)
AP01 is designed to use when top coating Polypropylene, TPO
(Thermoplastic Polypropylene), Polypropylene/ elastomer blends,
other plastics, aluminum, steel, brass and other metals. Adhereto®
creates a bond between a substrate and a coating, or between a dried
coating and a fresh (wet) one. This product is also useful when sanding
situations are difficult. Adhereto® is easy to use and dries in minutes.
Ready to spray right out of the can (no reduction required). Product is
clear in color.
ACCELERATOR (AX)
Accelerator (AX01) was designed for catalyzed acrylic urethanes and
specific polyurethanes to speed up cure time. Use Accelerator to speed
dry time in cool shops on parts that must be handled (or sanded for art
layouts) or re-coated the same day. Accelerator can be added to any
of the following Kosmic Kolor® products: SBS10, UC35, UFC19 and
UFC35 Klears; UB and UFB Solid Colors; and UK Kandys.
HI-HEAT BLACK (HH)
Hi-Heat Black is a fast-covering, great-looking, semi-gloss jet black finish
that will endure 1400° F without flaking or discoloration. It is a great
coating for engine parts or exhaust systems on cars, trucks, motorcycles,
small engines, etc. where high temperatures are a concern. Hi-Heat
Black comes ready-to-spray with no reduction required. Coated parts
are dry enough to handle in one hour without baking.
FLATTENING AGENT (FA)
Flattening Agent reduces the gloss of our polyurethane enamel topcoats
and Klears. Flattening Agent will not affect adhesion or hardness. It is
great for under carriages, frames and engine parts where you need a
tough, durable finish and low gloss.
Custom Painted Surfboard By Chris Cruz of DeLand, FL
STRIPING & LETTERING ENAMEL (KU200, UC03 & U SERIES)
Our Striping & Lettering Enamel is designed for striping, lettering and airbrush artwork. They feature high pigmentation, low solids
for a minimal edge and long open time. Apply over existing finishes or topcoat with a Klear for a smooth, durable finish. Our
Striping & Lettering Enamel may be top-coated with acrylic lacquer, urethane enamel, acrylic enamel or alkyd enamel clears. This
system is complete with its own reducer (U00), catalyst (KU200) and clear (UC03).
• House of Kolor® striping urethanes dry within minutes compared to the hour-long wait that has been a tradition
with oil based striping paints.
• House of Kolor® striping urethanes are fully compatible with the House of Kolor® system and don’t require an
isocyanate catalyst when clear-coating.
• The 36 colors currently available in the House of Kolor® striping urethanes allow the artist to mix and match any
color desired for pinstriping.
• House of Kolor® striping colors can be intensified with our Kandy Koncentrates to increase the intensity of a color,
or blended with UC03 striping clear to increase a color's transparency.
• House of Kolor® striping urethanes can be mixed with UC03 striping clear and a bit of catalyst, allowing them to
be used on top of the clear just like a single stage paint.
• House of Kolor® striping urethanes do not form skins within the can, eliminating product loss while making sure
you are using good product.
• House of Kolor® striping urethanes are less toxic then the alkyd enamels.
• House of Kolor® striping urethanes can easily be reduced for airbrushing, without compromising the structural
integrity of the paint, adhesion, durability, or overall cure time.
12
SHOP ESSE NT IALS
KUSTOM KOATINGS COLOR BOOK (CC100B)
The best way to check out the finest custom painting products available,
the Kustom Koatings Color Book consists of one complete set covering Base
Colors, Kandys and Pearls & Flakes – a total of over 400 color chips!
CYCLE PAINT STANDS (STAND)
Our heavy-duty motorcycle painting stands:
• Are completely adjustable for hundreds of uses
• Allow access to every inch on hundreds of parts
• Provide sturdy mounting of motorcycle tanks or fenders
• Come in three ready-to-go pieces for easy use and storage
• Are ideal for intricate artwork, sanding, buffing or polishing
PRESTIGIOUS PAINTER CALENDAR (HOK40503)
This calendar recognizes custom painters worldwide who use House of Kolor®
products. Each month features a different vehicle and a detailed listing of
products used to create each work of art. As always, we had a lot of great
entries and the winners are sure to look great on your wall.
Custom Painted Surfboard
By Mike Lavallee of Snohomish, WA
D ig ital Paint booth
See it before you paint it! With this software
program you can browse the House of
Kolor® color chart, generate fades, create
two-tones, and pick graphics from our pregenerated images. Available in Full Version,
Single Car Version, or Motorcycle Version.
Vehicles are added often, for a complete
list check www.hokdigitalpaintbooth.com.
Available in a Full Version (all cars), a
Single Version (one car) and a Motorcycle
Version; all updated regularly.
13
Minumum Requirements: PC with a 400MHz or higher processor • 64 MB of RAM
with Microsoft Windows® 98, or 128 MB of RAM with Windows NT 4.0, 2000,
or Windows XP • 80 MB of available hard disk space • CD-ROM drive • VGA or
higher resolution monitor set to High color (16 bit) or True color (32 bit) • Keyboard
and mouse or compatible pointing device.
KOOL RESOURC ES
DVD
THE SECRETS OF AIRBRUSHING TRUE FIRE Part 1 & Part 2
Mike Lavallee, a 25-year custom painting veteran, shares his unique approach to creating photorealistic
fire.
KUSTOM PAINTING MADE EASY DVD
World renowned painter Jon Kosmoski takes you through each process of car restoration step-by-step, from
paint stripping to base coat application and finally polishing.
CYCLE FLAME PAINTING DVD
Watch and learn as Jon Kosmoski corrects a dented Harley Davidson® gas tank and transforms it into
smooth, glossy, fuel-proof, attention grabbing artwork.
THE ART OF MARBLIZING DVD
Check out some of the awesome effects you can achieve using Marblizer Artistic Bases. In this video, a Buick
Regal is transformed into a wild street machine.
KAMELEON® KOLORS MADE EASY DVD
Kameleon® Kolors enable you to create radical color changing effects. This video offers step-by-step, surface
preparation and application instructions from Jon Kosmoski with tips from Craig Fraser.
KOSMIC KROME DVD
House of Kolor, with the help of custom airbrush artist Craig Fraser and Airbrush Action, has developed a
DVD on how to use the Kosmic Krome products in many different artist applications.
PRINTED
ADVANCED CUSTOM PAINTING TECHNIQUES BOOK
Jon Kosmoski explains in graphic detail how to set up a spray gun, choose the right tools for the job, spray
Kandies and Pearls, use color-change pigments, and lay out graphics and flames.
CUSTOM PAINT & GRAPHICS BOOK
Learn how to apply gold leaf, lay out a set of flames, use specialized pinstripe brushes, letter by hand, do
complex multicolor fades and more – all complete with start-to-finish photo sequences.
KUSTOM PAINTING SECRETS BOOK
Learn how to set up your shop, apply base coats and clear coats, apply a marble paint job, paint a motorcycle
engine and more.
CHEAP TRICKS & SPECIAL F/X BOOK
Written by Craig Fraser, this book is the most comprehensive and up-to-date "how-to" book on automotive
airbrushing and kustom graphics you will ever want to own.
For more information visit us at www.houseofkolor.com
14
BE RECOGNIZED AS A MEMBER
OF THE HOUSE OF KOLOR ELITE
It is your turn to be recognized as one of the elite. House of Kolor ® is proud to
announce the start of its tenth Prestigious Painter competition. The competition
is open to anyone whose custom projects are painted exclusively with House of
Kolor ® products, and recognizes the outstanding creativity and craftsmanship
of artists and custom painters alike who wish to show their accomplishments to
the world. Entries will be judged on finish quality, including technique, design
originality, and artistic merit.
Entries can be but are not exclusive to:
• Street rods
• Custom cars and trucks
• Motorcycles
• Other custom jobs: airbrush panels, guitars, etc.
• Other passenger vehicles such as semi-trucks, boats, and planes
GRAND PRIZE WINNERS RECEIVE
• Featured spot in the House of Kolor® Prestigious Painter Annual Calendar
• Featured spot in the Gallery of the House of Kolor® web site
• 10 copies of the House of Kolor® Prestigious Painter Annual Calendar
• House of Kolor® Prestigious Painter Jacket
• Specially designed House of Kolor® Prestigious Painter Trophy
HOW TO ENTER
To enter, enclose the best photograph you have of your completed custom project
(painted exclusively with House of Kolor® products) with this completed entry form,
and send to:
House of Kolor®
Attn: Prestigious Painter Contest
210 Crosby Street
Picayune, MS 39466
Photo Requirements
Entries that fail to meet the photo requirements listed below or those sent in without
a completed form, including a complete list of all products used, will be disqualified.
All photos submitted must meet one of the following formats:
• 4”x6” or larger, professionally processed, glossy finish print.
Matte finish or inkjet/laser prints will not be accepted.
• Digital photographs - Must be shot using at least an 8 mega pixel camera and
at the highest resolution possible.*
• Color slides
• Color negatives
PPA CONTEST TERMS & CONDITIONS
This competition is to recognize the outstanding creativity
and craftsmanship of artists around the world, whose custom
projects are finished exclusively with House of Kolor® products.
Such projects include but are not limited to classic cars, custom
cars, trucks, motorcycles, hot rods, street rods, airplanes, boats
and many other custom items. Contestants are accepted from
anywhere around the world but must be 18 years of age or
older and own or have refinished the vehicle being entered.
Prizes will be awarded to the entrants whether they are the
owners or refinishers and are non-transferable. Employees of
Valspar®/House of Kolor®, its affiliates, sales representatives,
associated agencies and their immediate families are not eligible
to participate in the contest. Winners will be chosen by a panel
of custom designers/painters, customizers, and customizing
enthusiasts. All entries will be judged on finish quality, including
technique, design originality, and artistic merit. The decision of
the judges is final. All chosen winners are subject to verification
of House of Kolor® product usage. Each winner will be featured
in the House of Kolor® Prestigious Painter Calendar for the year
2009 and in the gallery section of the House of Kolor® web site.
Winners will also have the opportunity to make an appearance
as a featured vehicle for House of Kolor® at selected trade shows.
Winners receive a limited-edition Prestigious Painter Jacket, a
specially designed signature trophy and 10 complimentary
copies of the calendar. Entries must be postmarked by May 31,
2008. All entries become the property of House of Kolor® and
will not be returned. House of Kolor® is not responsible for lost,
damaged or misdirected entries. Any misrepresentations or false
entry information will result in immediate disqualification. I am
18 years of age or older. I own or have refinished the vehicle
entered in this contest. I consent to and authorize the use by
Valspar/House of Kolor and their agents of the photographs
submitted by me and any reproductions of them for any purpose
whatsoever, including but not limited to the publication, display,
or exhibition thereof in promotion, advertising and commercial
activities of any kind without any compensation to me. I also
consent to the use of my name, address, likeness, vehicle and any
statements made by me in connection with the photographs.
PHOTOGRAPHY TIPS
Think creatively when taking photographs of your custom project. The photos you send in are the photos that will be used in the calendar. Try shooting
from different angles to show off some of the special features of your project. Crop the photo so that the whole object is in the picture, e.g., don’t cut off the
back wheel of your bike or the front fender of your vehicle. Avoid photos with people or object are in front of your entry. If shooting outside, try to take the
photo on a paved surface, like a parking lot or driveway. The more open the area is that you shoot the photo the better. Wetting down the pavement can
help prevent the pavement from reflecting up into the paint. Clear, sunny days are the best days to shoot outside. Keep the sun behind you when shooting
to get a sharper, clearer, more vibrant photo. Be aware of your surroundings, because whatever is around the vehicle will reflect in the shiny surfaces of the
paint and chrome. A good thing to avoid is taking a picture of the vehicle parked in the grass. The grass covers the wheels and sometimes the vehicle if it’s
been lowered. It also reflects in the chrome and paint, giving everything an unattractive green hue. Professional studio shots do help your project to stand
out, however, Valspar®/House of Kolor® is not responsible for any additional royalties to the photographer. Valspar®/House of Kolor® is willing to give the
photographer credit for use of the photograph in the calendar and for any additional use of the photo, if desired.
* Although digital cameras have become increasingly popular, the average quality and resolution of most digital cameras do not meet the requirements
of large format, professional printing. If your project isn’t shot with at least an 8 mega pixel digital camera using the highest image resolution setting
possible, the images will not be sharp enough for use in the calendar and will be disqualified.
15
For more information visit us at www.houseofkolor.com
AIRBRUS H SIZE S
House of Kolor® is pleased to offer smaller packaging convenient for airbrushing. These items include 29 of our most popular
Shimrin® base coat colors in 4-oz. bottles, and 10 of the most popular Kandy Koncentrates in 2-oz. bottles. SG100 Intercoat
Klear is also included in a 4-oz. bottle for intermixing. Now, you no longer have to buy these colors in larger containers, and you
have the assurance that you are getting the exact same House of Kolor® quality and finish. These products are not pre-reduced
or altered in any way.
4oz SHIMRIN BASE COATS
BC01.C02 - SOLAR GOLD
BC02.C02 - ORION SILVER
BC03.C02 - GALAXY GREY
BC09.C02 - PLANET GREEN
BC12.C02 - ZENITH GOLD
BC25.C02 - BLACK
BC26.C02 - WHITE
KBC01.C02 - BRANDYWINE
KBC02.C02 - LIME GOLD
KBC05.C02 - COBALT BLUE
KBC08.C02 - TANGERINE
KBC11.C02 - APPLE RED
MB01.C02 - SILVER TO WHITE MARBLIZER
MBC01.C02 - PALE GOLD
PBC31.C02 - SUNSET
PBC32.C02 - TANGELO
PBC36.C02 - TRUBLUE
PBC37.C02 - MAJIK BLUE
PBC38.C02 - LIMETIME
PBC39.C02 - HOT PINK
PBC40.C02 - VIOLETTE
PBC42.C02 - PLATINUM
PBC44.C02 - SNOWHITE
PBC65.C02 - PASSION
SG100.C02 - INTERCOAT CLEAR
SG101.C02 - LEMON YELLOW
SG102.C02 - CHROME YELLOW
SG103.C02 - MOLLY ORANGE
SG104.C02 - EURO RED
SG105.C02 - BLUE BLOOD
17
2oz KANDY KONCENTRATES
KK01.C03 - BRANDYWINE
KK02.C03 - LIME GOLD
KK04.C03 - ORIENTAL BLUE
KK05.C03 - COBALT BLUE
KK07.C03 - ROOT BEER
KK08.C03 - TANGERINE
KK09.C03 - ORGANIC GREEN
KK11.C03 - APPLE RED
KK12.C03 - PAGAN GOLD
KK17.C03 - VIOLETTE
Chevy Truck
Painted by: Marcus Pfeil of Austria
HOUSE OF KOLOR ® MATERIAL GUIDE
PROJECT:
AMOUNT
PRIMER:
KP2CF - CHROMATE FREE EPOXY*:
* Two part system
1:1 - KP2CFA & KP2CFB
Choose one
option
1 PART KP2CFB:
KD2000 - DTM EPOXY*:
LOW VOC OPTION
4 PARTS KD2000:
* Two part system
4:1 - KD2000 & KDA2000
SEALER:
KS10 - WHITE KO-SEAL® II*
KS11 - BLACK KO-SEAL® II
KS12 - BLACK KO-SEAL® II*
KS210 - WHITE KO-SEAL® II*
KS211 - BLACK KO-SEAL® II
KS212 - BLACK KO-SEAL® II*
OPTIONAL KK COLOR For TINT:
2.1 VOC OPTION
2.1 VOC OPTION
2.1 VOC OPTION
BASE/COLOR:
1 PART KP2CFa:
1 PARTS KDA2000:
Ko-SEAL® II requires A CAtalYst and REDUCER.
* TINTABLE WITH Kandy Koncentrates
For A shade of Gray MIX Black and White SEALERS
4:1:1 - Ko-Seal® II : KU150 : REDUCER
KO-SEAL® II:
OPTIONAL TINT:
BASES AND COLORS WILL NEED TO BE REDUCED. DOING A KANDY JOB? DON'T FORGET THE METALLIC BASE.
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:
INTERCOAT:
ALL INTERCOAT PRODUCTS MUST BE TOPCOAT CLEARED.
SG100 - INTERCOAT CLEAR: PROTECT YOUR AIRBRUSH WORK AND SEAL YOUR MARBALIZER
USG100 - INTERCOAT BARRIER CLEAR: A CATALYZED VERSION OF SG100 - requires A CAtalYst
SG150 - INTERCOAT PEARL & FLAKE KARRIER
KANDY:
URETHANE KANDIES BEST CHOICE FOR OVERALL KANDY JOBS; require A CAtalYst and REDUCER.
KANDY KONCENTRATES INTENDED for tinting, artwork, touch-ups or Detailing.
DESCRIPTION:
DESCRIPTION:
KLEARS:
MATTE/FLAT FINISH
LOW VOC OPTION
ACRYLIC LACQUER
UC35, UFC 35, UCC01, UMC35 & UFC 19 requires A CAtalYst and REDUCER.
UC35 - KOSMIC ACRYLIC URETHANE KLEAR
UFC35 - KOSMIC URETHANE FLO-KLEAR
UCC01 - KOSMIC ACRYLIC URETHANE KUSTOM KLEAR
UMC35 - KOS-MATTE KLEAR
UFC19 - URETHANE KOMPLY KLEAR® II
SC01 - SUNSCREEN CLEAR
ALL HOUSE OF KOLOR® KLEARS
HAVE DIFFERENT VOC OPTIONS
BASED ON CHOICE OF REDUCER
AND CATALYST, BE SURE TO READ
THE TECHNICAL DATASHEETS.
CATALYST:
1 pint of Catalyst per Quart of products that begin with a "u" & 1 Pint per 2 Quarts of Ko-Seal®
REDUCER:
1 pint of Reducer per Quart of most colors and clears. Check TECHNICAL Data Sheet for specific requirements
VOC EXEMPT
KU100 - CATALYST
KU150 - Exempt Catalyst
KU151 - Slow Exempt Catalyst
RU310 - Fast Reducer
RU311 - Medium Reducer
RU312 - Slow Reducer
RU313 - Very Slow Reducer
RU300 - VOC EXEMPT FAsT TO MEDIUM
PEARLS, FLAKES & OTHER:
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:
Tech Line For Paint Questions 800-845-2500 • For more information visit us at www.houseofkolor.com
18