docTRUCK ACCESSORIES
download 
Report Transcription
TRUCK ACCESSORIES
TRUCK ACCESSORIES - TONNEAU COVERS 167 TRUCK ACCESSORIES - TONNEAU COVERS Easily Complete Your Pickup • No drilling required--installs easily! • Protect your truck's cargo. • Padded aluminum frame clamps on--no metal to metal contact! • Improve gas mileage--cover pays for itself. • Elegance & Simplicity • Aluminum corner pieces for fast and easy removal of front and rear rails. • Sliding snaps on framework guarantee simple cover attachment. • Cover and cross members easily removed for hauling large items. • Limited Lifetime Warranty Limited Lifetime warranty covers defects in materials and workmanship on Vinyl Cover and Rails The Tekstyle Profile snapless roll-up cover offers the ultimate combination of features! Profile Tonneau Features: • Smooth snapless design, low profile bows • Mounts to top of pick-up bed for improved water runoff and minimal bed space intrusion • Does not interfere with other accessories such as bed extenders, chest-type tool boxes, and over-the-rail bed liners. • Quick, simple installation. Cover, bows, and front rail pre-assembled at the factory • Hook and loop fasteners integrated into aluminum rails • Sewn fitted corners and durable rubber seals front and rear eliminate moisture, wind, dirt penetration • Rear tensioning levers lock cover securely in place • Simple to use Bungee straps secure cover when stowed and won't rattle against truck body • Limited Lifetime Warranty Tekstyle Premium Snap-On Tonneau • Trigger-Lock Bows feature a spring loaded latch mechanism that allow them to install and remove with one hand • Installs in 7 minutes! Upper clamps are pre-measured and installed at the factory • Unique Santoprene tailgate seal keeps water out and is channeled into the aluminum rear rail so it stays put • High tech silver frame, stainless steel snaps • "Smart Snaps" stay in place on the frame • Cover allows access at front corners • "No drilling required" installation! • Front and rear rails snap solidly into place, gently tap to remove for hauling large loads! • Hook and loop straps secure cover when stowed • Available in Standard Black and *Cream White, Sand, Slate, Bright White, Medium Neutral, Red, Indigo Blue, Carbon Fiber, Black Acrylic • Lifetime Warranty. *By special order only Teksport Tonneau Covers The Revolutionary "QUICK HATCH" Tonneau Cover! Quickhatch Features: • • • • • • Unique positive latching system closes in one easy step! Gas struts support the cover in its upright position. Hinged portion removes easily for bulk hauling. Black epoxy-coated frame. "No drilling required" installation! Built to LAST --- all metal structural parts. • Limited Lifetime Warranty against defects in materials and workmanship on Fabric and Rails. CALL US TODAY FOR YOUR APPLICATION 168 TRUCK ACCESSORIES - TUBE STEPS Make getting in or out of your truck a breeze while enhancing the look of your vehicle at the same time. Application specific, these CAD engineered tube steps utilize existing holes on 95% of applications. This means we've eliminated frame drilling, welding, and the need to raise the vehicle. Kits include: • Easy to follow instructions • Brackets • Hardware • Ordinary hand tools are required to install applications. • Molded polymer step pad provides skid resistant traction. Additional Step Pad Strength Step pad recess is formed into the tube rather than cut for additional strength. Exacting Fits Our products provide an exact fit for each specific vehicle. Over 100 different applications available! The Industry's Best Warranty: Lifetime Warranty on Stainless Steel. Stainless steel offers durability and longevity not available in chrome finishes. 5-year Warranty on Black Powdercoat tube steps with exclusive E-coat. CALL US TODAY FOR YOUR APPLICATION 169 TRUCK ACCESSORIES • AUTO VENTSHADE ADD FRESH-AIR COMFORT, STYLE & PROTECTION WITH AUTO VENTSHADE PRODUCTS VENTVISOR ® DEFLECTOR Our most popular Ventshade accessory, the Ventvisor keeps rain out and lets fresh air in, reducing harmful heat buildup and reducing interior damage. They feature a smooth, stylish smoked acrylic design and are custom made for each application for a perfect fit every time. Easy to install with durable 3M adhesive tape, they require no drilling to install and are available for hundreds of cars, trucks and sport utility vehicles, 2 & 4 door models. Now available for extended cab pickups!! BUGFLECTOR Add functional protection to your front end with the Bugflector bug and stone deflector. Molded from durable Plex DRTM, the bugflector installs easily with OEM approved 3M tape and/or screws for a perfect custom fit. And, the smooth contoured shape adds an aerodynamic appearance that flows smoothly with the lines of your vehicle for a clean factory look. Available for most popular truck and SUV applications including a 3-piece design for the new Dodge Ram and Dodge Dakota pickups. BUGFLECTOR - ORIGINAL STYLE BUGFLECTOR II - WRAP-AROUND STYLE SUNFLECTOR ® REAR WINDOW SUN DEFLECTOR Shade the rear of your pickup cab from the glaring sun with this unique rear window sun deflector from Auto Ventshade Company! The stylish smoked acrylic design blends with the cab contour for a truly custom look, and it fits with or without sliding rear windows. The Sunflector installs in minutes with no tools using OEM approved 3M adhesive tape and is available for many popular pickup applications. WINDFLECTOR ® SUNROOF DEFLECTOR Eliminate wind noise, buffeting and enjoy fresh air comfort even in the rain with the Windflector! Custom molded for a perfect fit from dark smoked acrylic, the Windflector installs in seconds with OEM approved 3M adhesive tape. No tools and no drilling required! Available for power or pop-out style sunroofs. 170 TAILLIGHT COVERS TAILLIGHT COVERS BOW TIE TAILLIGHT COVERS 2403 24582 BIG HORN SERIES 27703 27403 27193 SPORTSMAN SERIES 27501 PATRIOT SERIES 2831 27502 Ask about additional taillight covers. 171 TOWING MIRRORS CUSTOM TOWING MIRRORS CIPA’S CUSTOM TOWING MIRRORS SLIDE OVER YOUR VEHICLE’S EXISTING MIRROR TO GIVE YOU ADDED TOWING VISION. CIPA # 11960 Universal Towing Mirror CIPA-USA’S new Universal Towing Mirror extends your vision further than any OEM mirror. With a fully adjustable mirror, adjustable feet, securing clamps, and tightening knob, this mirror gives you the extended vision you need, without any annoying vibration! WIth its aerodynamic and durable styling, and no tools required to install this is the perfect mirror for beginning and experienced towers everywhere CUSTOM TOWING FIT CHART Application & Fits Part Number Years CHEVY 1000 GMC/Chevy Pick-Ups & Vans Fits Chrome Manual Mirrors Only 1980-1995 Will not fit the chrome mirrors with black trim 10200 Pair 10201 Left 10202 Right Many GMC/Chevy full size vehicles Suburban/Yukon/Kodiak/Dually Safari /Astro Vans Dodge Pick-Ups & Vans 1986-1995 86-93 Fits both electric & manual chrome mirrors 1994095 fits chrome manual mirrors only 1996-1998 1992-1999 1991-1999 GMC/Chevy full Size pick-Ups Chevy Blazer Cadillac Escalade 1996-1998 1992-1993 2000 Fits both electric & manual black fold-away mirrors Fits the long, thin mirror that is not attached to an arm 10400 Pair 10401 Left 10402 Right Chevy Sonoma Chevy S-10 Chevy Blazer, Jimmy, Oldsmobile-Bravada 1996-1998 1995-1998 1995-1998 Fits electric & manual black mirrors 10600 Pair 10601 Left 10602 Right Chevy Venture GMC Silhouette Pontiac Transport 1997-1999 1997-1999 1997-1999 10800 Pair 10801 Left 10802 Right GMC/Chevy Full Size Pick-Ups, Silverado & Sierra Yukon / Tahoe/Cadillac Escalade / Suburban / Avalanche Jimmy / Blazer 1999-2003 2000-2003 Fits the full black & chrome-cap models, will not fit the full chrome mirrors CHRYSLER/DODGE/JEEP 10100 Pair 10101 Left 10102 Right 10300 Jeep Grand Cherokee, Grand Wagoneer 1993-1995 Fits both electric & manual black mirrors Fits the Grand Cherokees only Dodge Pick-Ups & Vans 1994-1997 1994-1997: fits both electric & manual black mirrors 1996-1997: fits the chrome electric mirrors will not fit the Dodge Dakotas with black sport mirrors 10500 Pair 10501 Left 10502 Right Dodge Dodge Dodge Dodge Ram (2002 - fits 2500 & 3500 only) Dakota Durango Full Size Van 1998-2002 1998-2000 1998-2000 2000-2002 will not fit 5 x 7-inch sport mirror 10700 Pair 10701 Left Dodge Ram 1500 Dodge Ram 2500 & 3500 2002-2003 2003 11000 Ford Full SIze Pick-Ups & Rangers Chevy S-10 & GM S-15 FORD 1983-1998 1982-1993 Fits the chrome two-point break away style mirrors Fits the s-10/s-15 up to 1993 only Fits Rangers only up to 1991, style changed in 1992 11500 Pair 11501 Left 11502 Right Ford Full Size Pick-Ups Ford Aerostar Van Ford Explorer Ford Navajo & Bronco Additional adapter (Part # 11504) needed for Explorer Will not fit E-series’ Clubwagon, Econoline, Windstar Vans, or Rangers with black sport mirrors. Also 1997 F-250 & F-350 Heavy Duty with old body style (black mirror with chrome back) 1992-1996 1990-1996 1988-1995 11600 Pair 11601 Left 11602 Right Ford Full Size Pick-Ups Light Duty, Expedition Lincoln Navigator 1997-2002 1998-2002 Fits both painted and chrome mirrors 11700 Pair 11701 Left 11702 Right Ford Full Size Pick-Ups F-250, F-350 & Heavy Duty (manual) F-150 XL (manual) 1997-1998 2000-2001 11900 Pair 11901 Left 11902 Right Ford F-250 & F-350 Super Duty Ford F-150 XL Ford Excursion 1999-2002 1999-2000 2000-2002 172 MIRRORS • BED EXTENDERS BED EXTENDER The CIPA-USA Truck Bed Extender is available for most current full-sized and mini pickup trucks. It can be used to extend a full-size bed for extra-long loads, to secure corners increase load capacity dramatically. Because of the way it attaches, you never need to load cargo by lifting it up over the top of the Extender! • • • • • • • Installs easily in 3 minutes with NO DRILLING! Great Looking, does the job with style Square corners dramatically increase load capacity Enables you to fit even standard size 2 x 4’s Strong enough to attach anchor straps Fit most current pickups and bed lengths Works even with bedliners Model Chevy/GMC 1500 1500 2500 2500 3500 3500 S-10, S-15, Sonoma S-10, S-15, Sonoma Dodge Ram Dakota Ford F-150 F-150 F-250 Super Duty F-250 Super Duty Ranger Ranger Nissan Pickup Hardbody Toyota Tacoma • • • • • • • Fabricated from tubular steel Powder-coated for durability and visual appeal Weighs less than 40 lbs. Uses tailgate mechanism to hold secure Quick release for easy removal Swings down to create easy loading and unloading Will fit behind rear seats when unassembled Years Description Part # 1989-2003 1989-2003 1989-2003 1989-2003 1989-2003 1989-2003 1989-2003 1989-2003 Full-size Trucks w/Styleside 6-1/2’ or 8’ bed Full-size Trucks w/Flareside Full-size Trucks w/Styleside 6-1/2’ or 8’ bed Full-size Trucks w/Flareside Full-size Trucks w/Styleside 6-1/2’ or 8’ bed Full-size Trucks w/Flareside Light Trucks w/Styleside 6-1/2’ or 8’ bed Light Trucks w/Flareside 6-1/2’ bed 05700 05701 05700 05701 05700 05701 05702 05703 1993-2003 1995-2003 Full-Size Trucks w/Styleside 6-1/2’ or 8’ bed Fender Side 6-1/2’ or 8’ bed 05700 05704 1996-2003 1996-2003 1999-2003 1999-2003 1984-2003 1984-2003 Full-Size Trucks w/Styleside 6-1/2’ or 8’ bed Full-Size Trucks w/Flareside Full-Size Trucks w/Styleside 6-1/2’ or 8’ bed Full-Size Trucks w/Styleside 6-1/2’ or 8’ bed Light Trucks w/Styleside 6-1/2’ or 8’ bed Light Trucks w/Flareside 6-1/2’ 05700 05701 05700 05700 05702 05703 1996-2003 Light Trucks w/Styleside 6-1/2’ or 8’ bed 05702 1996-2003 Light Trucks w/Styleside 6-1/2’ or 8’ bed 05702 HOTSPOT MIRRORS A.Stick-On Hotspots CIPA # Round Style convex blind spot mirrors feature convenient stick-on mounting. 49102 Eliminates your blind spot for safe driving, passing and changing lanes. 49202 Description 2” Round Convex 3” Round Convex 3-3/4” Round Convex 4” x 5-1/2” convex 49302 49402 * Adjustable Hotspots 360 adjustable spot mirror attaches to your mirror, giving you customized wide angle viewing CIPA # 49104 49304 B. Clamp-On HotSpots Adjustable 5” style clamp-on convex spot mirror attaches to your mirror CIPA # 49502 bracket, giving you wide angle viewing for increased safety CIPA # C. Clamp-On HotSpots Adjustable 4” x 8” clamp-on convex spot mirror attaches to your mirror 49504 bracket, giving you wide angle viewing for increased safety D. Wedge Hotspots Unique wedge design adds 30% more vision than round convex. Great for all vehicles. E. Clip-On Safety Mirror Clips on the visor for added rear view vision. D C 173 Description 4” x 8” Clamp-On Convex Description 1-1/2” x2” Convex Wedge 2-1/2” x 3-3/4” Convex Wedge 3-1/4” x 3-1/4” Corner Wedge 2” x 2” Corner Wedge CIPA # 49602 Description Clip-On Safety Mirror E B Description 5” Clamp-On Chrome CIPA # 49002 49702 49403 49404 F. Dual View Baby Mirror Clips on the visor, or suctions to your windshiled to keep an eye on back seat rid- CIPA # 49606 ers, watch cargo in vans and pick-ups, or keep an eye on your baby. A Description 2” Round Convex- 360 Adjustable! 3-3/4” Round Convex - 360 Adjustable Description Dual View Baby Mirror F TRUCK ACCESSORIES - BEDLINERS • BED MATS LINE-A-BED® BEDLINERS Most Popular Applications are Available - Call Us Today! SUPERIOR PROTECTION From the leader in truck bed innovation, the original Line-A-Bed™ bedliner is now better than ever. “SR” skid resistant technology helps keep loads secure and doesn’t wear off like “scuffed” skid resistant surfaces used by other brand bedliners. Line-A-Bed SR™ is loaded with features and delivers superior truck bed protection at an affordable price. BUILT-IN DURABILITY The Line-A-Bed SR™ bedliner is molded of durable, high density polyethylene to last as long as your truck. The high-ribbed floor pattern is designed to promote drainage and create additional cushioning against denting – a feature that you don’t get with other types of bed protection. ADDITIONAL FEATURES • Lifetime Warranty • True Customized Fit On Every Model • Molded in supports for Two-Tier Stacking and Lock-In Loading BED MATS 174 TAILGATE COVERS & CAPS • HOOD SHIELDS TREADPLATE TAILGATE CAPS AND COVERS 304 STAINLESS HOOD SHIELDS • One piece - No welds 58912404 58912405 58912406 •Won’t crack or chip Chevy 88-C Dodge 94-C Ford 97-C 175 TRUCK BOXES DIAMOND PLATE CROSSOVER TOOL BOXES CROWN SERIES - SINGLE LID PART NO. DESCRIPTION 73010839 73010840 73010869 73010870 73010884 73010885 73010899 73010951 73010965 73010966 58” 58” 60” 60” 63” 63” 70” 70” 72” 72” Single Single Single Single Single Single Single Single Single Single Lid Lid Lid Lid Lid Lid Lid Lid Lid Lid Crossover Box Deep Crossover Crossover Box Deep Crossover Crossover Box Deep Crossover Crossover Box Deep Crossover Crossover Box Deep Crossover Box Box Box Box Box CROWN SERIES - GULLWING (DUAL LID) PART NO. DESCRIPTION 74010816 74010831 74010861 74010862 74010876 74010884 74010891 74010892 74010957 74010958 51” 58” 60” 60” 63” 67” 70” 70” 72” 72” Gull Gull Gull Gull Gull Gull Gull Gull Gull Gull Wing Wing Wing Wing Wing Wing Wing Wing Wing Wing Crossover Box Crossover Box Crossover Box Deep Crossover Box Crossover Box Crossover Box Crossover Box Deep Crossover Box Crossover Box Deep Crossover Box QUANTUM ATB SERIES PART NO. DESCRIPTION 70011168 70011307 70011167 60” ATB Quantum Crossover with Rotary Latch 63” ATB Quantum Crossover with Rotary Latch 70” ATB Quantum Crossover with Rotary Latch 176 TRUCK BOXES DIAMOND PLATE TRUCK CHESTS & SPECIAL USE BOXES TRUCK CHEST BOXES SIDE MOUNT • TOP MOUNT • UNDERBODY BOXES 177 TRUCK BOXES WHEEL WELL BOXES • Two sizes available (48” & 60” long) • Fits in unused space around wheel well • Height accommodates tonneau cover PART NO. DESCRIPTION 68012344 68012345 48” Length x 18” Height x 8” Width Wheel Well Box 60” Length x 18” Height x 8” Width Wheel Well Box A-FRAME TRAILER TONGUE BOXES • Two sizes available (short and tall) • Designed to fit available space on trailer tongue • Storage space for ropes, heavy chains, tie downs, etc. PART NO. DESCRIPTION 66012336 66012214 18” Height x 19” Deep x 33” Width 22” Height x 14” Deep x 34” Width FIFTH WHEEL BOXES • Two styles available • The V Top allows for greater accessibility from either side of truck when attched to trailer. Will fit almost all fullsize truck beds. • The Slant Lid model allows for a clear view into the bed of the truck at all times. Box will not hinder accessibilty of your fifth wheel. 2 LID BOX - V TOP SLANT LID PART NO. DESCRIPTION 62010215 62011171 5th Wheel Slant Lid 56”L x 19”W x 19”H “V” Top, 2 Lids 56”L x 19”W x 19”H 178 TRUCK TAILGATES • BED RAILS • RUNNING BOARDS TUBULAR TAILGATES PLEASE CALL FOR APPLICATIONS BED RAILS PLEASE CALL FOR APPLICATIONS RUNNING BOARDS PLEASE CALL FOR APPLICATIONS 179 TRUCK BOXES LOW RIDER SERIES SINGLE LID ALUMINUM CROSSOVERS LOW PROFILE SINGLE LID ALUMINUM CROSSOVERS 232000 232002 * * * * * * * Non-Stocking Item - Available by Special Order 180 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Non-Stocking Item - Available by Special Order 181 TRUCK BOXES STEEL SINGLE LID AND GULL WING CROSSOVERS 182 TRUCK BOXES 48” AND 59” LONG ALUMINUM INNERSIDES * * Non-Stocking Item - Available by Special Order DELTA PRO ALUMINUM CHESTS * * * Non-Stocking Item - Available by Special Order 183 TRUCK BOXES 184 TRUCK BOXES HEAVY-DUTY, WEATHER-RESISTANT, ALUMINUM AND STEEL UNDERBED BOXES ALUMINUM TRAILER TONGUE BOXES 185 TRUCK BOXES * * * * Non-Stocking Item - Available by Special Order 186 TRUCK BOXES * * Non-Stocking Item - Available by Special Order 187 TRUCK BOXES Aluminum Single Lid Deep Fullsize HIGH-SECURITY CROSSOVERS Aluminum Gull Wing Deep Fullsize * * * * * * * * * * * * * * * * * * * * * * * * Non-Stocking Item - Available by Special Order Steel Gull Wing Deep Fullsize * * Single Lid Deep Fullsize * * * * * * * * Non-Stocking Item - Available by Special Order 188 TRUCK BOXES HIGH-SECURITY INNERSIDES BOXES Available in Clearcoat, Black & Unpainted Aluminum White or Black Steel * * * * * * * * * * * * * * * * * * Non-Stocking Item - Available by Special Order 189 TRUCK BOXES HIGH-SECURITY HEAVY GAUGE TOPSIDE BOXES Available in Clearcoat, Black & Unpainted Aluminum White or Black Steel Rugged 100-Gauge Aluminum Reinforced Doors, Center Post and Ends for Superior Strength, Durability and Security * * * * * * * * * * * * * Rugged 14-Gauge Steel Reinforced Doors, Center Post and Ends for Superior Strength, Durability and Security * * * * Non-Stocking Item - Available by Special Order 190 TRUCK BOXES EXTRA-DUTY UNDERBED BOXES * * * * * * * * * * * * * * * * * * * JOBOX JOB SITE STORAGE BOXES HEAVY-DUTY CASTER SETS - INCLUDES TWO FIXED AND TWO SWIVELING CASTERS. Model 601040 602040 * * Size 4” 6” UPC 0-43419-90087-5 0-43419-90088-2 CHESTS Model # 650990 652990 653990 654990 655990 656990 UPC L Dimensions shown in inches. 0-43419-90551-1 30 0-43419-90552-8 36 42 0-43419-90553-5 0-43419-90554-2 48 0-43419-90555-9 60 0-43419-90556-6 48 W 16 17 20 24 24 30 H Cu. Ft. 12 19 1/2 23 3/8 27 3/8 27 3/8 33 3/8 Usable Wt. Lbs. 3.3 5.8 9.3 15.4 19.3 24.3 Shipping Cu. Ft. 33.0 89.0 108.0 141.0 171.0 175.0 Shipping 4.6 8.8 13.8 22.3 27.3 33.3 SLOPE LID CHEST Model # UPC 680990 0-43419-90557-3 L W Dimensions shown in inches. 60 9/16 30 H 39 1/2 Usable Cu. Ft. 32.7 Shipping Wt. Lbs. 245.0 Shipping Cu. Ft. 45.5 PIANO BOX Model # UPC 682990 0-43419-90558-0 60 7/8 H W L Dimensions shown in inches. 47.5 49 1/2 31 11/32 Usable Cu. Ft. 323.0 * Non-Stocking Item - Available by Special Order 191 Shipping Wt. Lbs. 59.2 Shipping Cu. Ft. FUEL TRANSFER TANKS 192 FUEL TRANSFER Our Most Popular Fuel Transfer Pump Cable and Switches 1200R9067 1200F3170 18’ Two Wire Cable Lineswitch1200 series Model 1210C Filter Kits and Elements 1200KTF7019 1200KTG9075 Standard-Duty 12 Volt DC Pumps 1810PM1 F1810HM0 Model SD1202A F4010PM0 700ACCF7017 Particulate Filter Kit Fits 100/5200/1200 Series 3/4” Cast Filter Head Fits 100/5200/1200 Series Canister Filter w/Drain Fits 100/5200/1200 Series Hydrosorb Element Fits 1200KTF7019 Kit Particulate Element Use with 1” Filter Head 1 inch Alum. Filter Head Nozzles and Accessories NO75UAU10 6U075 N100DAU10 700F3125 4200F9111 3/4” Auto Nozzle 3/4” Manual Nozzle 1” Auto Off Nozzle 1” Manual Nozzle Nozzle Hook Pump Hoses Model 4210D Has 1 inch thread 700F3135 FRH10012 FRH10020 3/4” X 12’ Hose 1” x 12’ Hose w/spring guard 1” x 20’ Hose w/spring guard Pump Meter Kits 807CMK Fits 700 & 1200 Pump Rebuild Kits 1200KTF 4200KTF Model 700 Model 112 Repair Kit fits 1210A / 1210B Repair Kit fits 1210C / 4200D Model 112C Model 152 Model 113 193 - Pump Only, No Hose or Nozzle FUEL TRANSFER Model # DMA001R Pump with Standard Nozzle and 10’ Hose OPTIONAL #048521 Filter Kit Available 194 TRUCK ACCESSORIES - RAMPS RAMPS AND RAMP KITS TRI-FOLD UTILITY LOADING RAMPS SR69 - 45” Wide x 69” Long SR77 - 50” Wide x 77” Long SR69 & SR77 - 1500 lb. distributed load capacity 400 lb. point load capacity • Tri-Fold design is constructed of durable, rust-resistant aluminum • Rungs are riveted for added strength, spaced 8” apart, and replaceable • Full-width top plate with non-marring, vinyl backing provides added stability and smooth transition between ramp and loading surface • Side rails feature raised edges to help guide wheels when loading and unloading. SR77 side rails have grooves to hold 1/4” plywood decking (plywood not included with SR77 model) - ideal for loading snowmobiles • Dual stability chains with S hooks for securing ramp to loading surface • SR69 folds to 15” in width, SR77 folds to 16” in width FOLDING RAMPS 25710193 • • • • Load it, fold it, stow it Great for 4-Wheelers, snowmobiles, lawn tractors and motorcycles Available in cross beam style-load tested for up to 1,000 lbs. Per ramp Folds for convenient storage RAMP KITS Part # - RE8TB • • • • • • • • • Turns ordinary 2” x 8” boards into loading ramps! 2-8” top & bottom plates with mounting hardware Constructed of heavy-duty zinc plated steel Easy & fast to assemble Economical Turns 2” x 8” (not included) into convenient all purpose ramps Mounting bolts, hardware and easy-to-install instructions are included Top plates feature traction grips Ideal for loading and unloading all terrain vehicles, garden tractors and mowers, motorcycles, wheelbarrows, wheelchairs, hand trucks, and more RAMP CHAMP - LIGHTER! TOUGHER! STRONGER THAN STEEL! 750 lb per ramp Ramp Champ is the perfect solution to all your loading needs. Heavy Duty composite structural technology delivers superior 750 lbs. per ramp performance. Telescopes from 5 1/2’ to 8’ RAMP CHAMP • Rustproof for lifetime performance • Impervious to gas, oil and extreme temperatures • Raised edge keeps tires on ramp • TRA Control non-slip surface for extra traction • Arched design for additional clearance • No hinge point...no chance of pinching fingers • Convenient to store...Slides under ATV 195 Part No. 11200 11201 Description Ramp Champ Ramp Champ Unit Pair Single TRACRAC SYSTEMS AND TONNEAU COVERS TRUCK & VAN RACK AND ACCESSORIES NEW! TracTonneau - Truck Bed Cover Standard System Includes: • Tonneau Cover • Transverse Support Tubes • Front Tensioning Beam • Rear Locking Bar • TracRac Integration Rails • Automatic Tension Control • Floating Hook Technology • 2 Year Warranty • Fast Easy Roll-Up 196 VANRACK • T-RAC • CAPRACK • ACCESSORIES The Premium Cap Rack Part No. 29200 Standard System Includes: • 2 Overhead Racks • 4 Crossbar Tiedowns 197 TRUCK & VAN UTILITY RACKS CAP RACKS LADD RACK UNIVERSAL - MODEL NO. LRUNC Fits all make trucks with cab height caps. 25" clearance from foot plate to bottom of adjustable cross bar. Rack may be removed from extendo-plate without disturbing cap seal. (1997-98 Ford F150 and light duty F250 require special plates. Please specify when ordering). Weight: 62 lbs. UPS Acceptable Steel Tubing: 1.625 O.D. - .097 wall thickness Extendo Plates: 5" x 12" x 1/8" Color Finish: Black, White, Blue. Leg Plates: Angle Iron (2" x 2") x 91/2" x 3/16" Load Capacity: 500 lbs., uniformly distributed Includes two (2) Ladder Positioners LADD RACK UNIVERSAL - MODEL NO. LRUNC-HL Fits most highrise truck caps. A choice of two clearance heights 28" or 32" from foot plate to bottom of adjustable cross bar. Rack may be removed from extendoplate without disturbing cap seal. (1997-98 Ford F150 and light duty F250 require special plates. Please specify when ordering). Wt. 68 lbs. UPS Acceptable Steel Tubing: 1.625 O.D. - .097 wall thickness Extendo Plates: 5" x 12' x 1/8" Color Finish: Black, White, Blue. Leg Plates: Angle Iron (2" x 2") x 91/2" x 3/16" Load Capacity: 500 lbs., uniformly distributed Includes two (2) Ladder Positioners TRUCK CADDY RACKS - MODEL NO. TCR FOR FULL & MID SIZE PICK-UPS AND MOST IMPORTS Extended Cab TCR's are available for Ford, Chevy, GMC and Dodge. Add "CC" to model number when ordering. TCR FEATURES: 1. Rear End Bar swings 180 degrees and also locks in place. 2. Torsion bar truss adds strength. 3. Cab over extension is standard. 4. Built-in window protection. MATERIAL & STRENGTH SPECIFICATIONS Steel Tubing: 1.625” O.D. - .090 wall thickness Torsion Bar: 1" x 1/4" Load Capacity: 1,000 pounds, uniformly distributed. Angle Iron: 13/4" x 13/4" x 3/16" Window Screen: 9-gauge flattened expanded steel x 1 1/2" mesh. Color Finish: Black, Blue, White. 198 TRUCK & VAN UTILITY RACKS LADD RACKS ADJUSTABLE LADD RACKS MAKE OF TRUCK YEAR MODEL NO. WEIGHT Chevrolet & GMC - Full Size - Wide Chevrolet S-10 & GMC S-15 Dodge Full Size ˙ Dodge Dakota Dodge Ram-50 ˙ Ford Full Size Ford Ranger ˙ Isuzu ˙ Jeep Comanche Mazda ˙ Mitsubishi ˙ Nissan ˙ Toyota ALL LRA 54 lbs. Chevrolet & GMC Full Size - Narrow - ALL LRA-ST 47 lbs. Sport Side (Straight Legs) Ford Full Size - Narrow Flareside (Straight Legs) Material & Strength Specifications for Standard Ladd-Rack (LRA): We strongly recommend using Horizontal Bars (LR-HB) due to thin bedrails on newer trucks. Steel Tubing: 1.625 O.D. - .097 wall thickness Leg Plates: Angle Iron (2" x 2") x 91/2" x 3/16" Load Capacity: 400 lbs., uniformly distributed with optional horizontal bars. Color Finish: Black, Blue, White. Includes two (2) Ladder Positioners CAB GUARD ALUMINUM VAN RACKS The screen that protects the truck cab window is made of 9-gauge flattened, expanded steel x 1 1/2" mesh. Material & Strength Specifications Standard Cab Guard (CG) Steel Tubing: 1.625 O.D. - .097 wall thickness Leg Plates: Angle Iron (2" x 2") x 9 1/2" x 3/16" Color Finish: Black, Blue, White. Model No. 80000 Shown on 1996 Chev. GMT 600 Van THE RACK YOU'VE BEEN WAITING FOR! Model No. VRAL • 6000-Series Anodized Aluminum Cross Bars • 400 Lbs. Capacity (evenly distributed) • Adjustable Dual Material Positioners • Fits All Vans With Rain Gutters • Stainless Steel Hardware • Rugged Cast End Plates • Dual Gutter Clamps • Ships UPS When ordering extra middle half bar for 1992 and newer Ford Vans, specify VRAL Shim Kit. When ordering extra middle half bar for 1996 and never Chevrolet/GMC Vans, specify #29700 Shim Kit. 199 TRUCK AND VAN UTILITY RACKS *VAN RACK SYSTEMS BLACK ROUND CROSSRAILS EXTEND FROM 50" TO 72" MODEL DESCRIPTION 98701 98731 2 Bar System-500 lb. capacity. 3 Bar System-750 lb. capacity. Will work on all vehicles with external raingutters except 1992-present year Ford Econoline Vans (see 98701-98712). 1 Bar System-center rail for all vans with external raingutters except 1992-present Ford Econoline Vans (see 98712). 1 Bar System-center rail for1992-present year Ford Econoline Vans. 2 Bar Van Rack Adapter Kit. Must be used when installing Model #98701 Van Rack to Chevy Astro, Gmc Safari, and Ford Aerostar. 3 Bar Van Rack Adapter Kit-same as 98705; but for 98731 and 98701/98712. Gutter Hook Adapter-compatible with the Van Rack System for vans with sliding doors. 98711 98712 98705 98735 00975 *VAN MASTER SYSTEMS WHITE, SQUARE CROSSRAILS WITH TRIANGULAR WELDED UPRIGHTS\ (CROSS RAILS MAY BE CUT FOR CUSTOM FIT) MODEL DESCRIPTION 98740 98750 2 Bar System-750 lb. capacity. 3 Bar System-1000 lb. capacity. Will work on all vehicles with external raingutters except 1992-present year Ford Econoline Vans (see 98740-98746). 1 Bar System-3rd center rail for all vans with external raingutters except 1992-present Ford Econoline Vans (see 98746). 1 Bar System-3rd center rail for 1992-present year Ford Econoline Vans. 98745 98746 *Will not fit 1996/97 Chevy GM T600 and GMC Savannah Full Size Vans. PICKUP TRUCK SYSTEMS MODEL DESCRIPTION 98890 Truck Rack fits all 6 1/2' to 8' bed pickup trucks. Rack capacity is 1/2 of the bed's total capacity. Black Duo Pickup Truck Rack-2 removable uprights with arms that can be adjusted to two different positions. White 98760 200 TRUCK UTILITY RACKS FUNCTION AND STYLE FOR TODAY’S PICKUP TRUCKS Today’s Pickups look great, so why destroy their good looks with an awkward full frame rack? Backrack combines the strength & utility you demand with distinctive styling that compliments your truck. Backracks are made using 2” heavy gauge “Pickled & Oiled” steel tubing, giving a clean, scale-free steel finish for maximum rust resistance. SECURE CARGO and tie shifting loads to the Backrack. The Backrack’s strength and rigidity make it ideal for industrial, commercial and construction applications. Backrack’s no-mesh design makes it easy to tie ropes, attach straps, or hook rubber cords used to hold cargo. MOUNT LIGHTS, ANTENNAS and other accessories using one of the 7 different models of accessory Light Brackets. They simply bolt or clamp right onto the Backrack. Pictured here are the optional driver side and center mount Utility light Brackets, and the passenger side mounted Sport Light Bracket. CARRY LADDERS or any long load on the Backrack, with or without the REARBAR accessory pictured. The Backrack installs quickly and easily into the stakepockets, without drilling on most applications. The Backrack is compatible with all bedliners, and special Toolbox Brackets accommodate any cross-bed toolbox. PART # 10310 10310TD 10311 10312 10313 10316 10501 10502 10502SC 10503 10503T1 10504 10505 10506 10507 10508 10509 10509DW 10511 10512 10517 10803 DESCRIPTION Backrack Maz/Toy/D50 Isuzu not Tacoma Backrack Dakota 87-96 Backrack Ranger 82+ Mazda 84-00 BackrackS-10 82+ Nissan 86.5-00 Backrack Dakota 97+ Backrack GM Colorado/Canyon 04+ Backrack Super Duty 99+ F250-550 HD Backrack F-150 97+ Backrack Supercrew 01+ Backrack Chevy 88-98 Backrack T-100 93-98 (10503 & 911111) Backrack Chevy 68-87 Dodge 69-93 Backrack Ford 75-96 6.5’ Bed Only Backrack Ford 75-96 F250 97-98 Backrack Dodge 94-01 not 2002 Backrack Tundra 00+ Backrack Chevy/GMC 99+ Backrack HD Chevy Dually Only! 00+ Backrack Nissan Titan 04+ Backrack Ford F-150 New Body Style 04+ Backrack Dodge 02+ Backrack Sportside 88-98 Add the letters TB to a number to have rack w/tool box brackets. 201 TRUCK AND UTILITY RACKS SAFETY RACK COMPLETE WINDOW PROTECTION THAT IS FUNCTIONAL AND STYLISH Light Bar on 2-41000 spaced apart Mini Light Bar on 2-41000 side by side MOUNT ANY LIGHT OR ANTENNA WITH THE UNIVERAL 41000 LIGHT BRACKET The new 41000 univeral Light Bracket provides a variety of options for you to mount strobe lights, light bars, remote spots, antennas, mini light bars, or any type of accessory on to the Safety Rack. Why drill costly holes into the sheet metal of your truck. Speeds and simplifies the installation of lighting and accessories while preserving the resale value of your truck. SECURE CARGO CARRY LADDERS The safety Rack provides complete rear window protection for your truck and increased safety for your truck and increased safety for you and your passengers. The 3/16” diameter welded wire screen offers excellent visibility through its two inch centers. The full cab width design gives you 51 inches of cargo space for loading ladders and other long items. The accessory Rear Bar makes carrying long loads even more convenient and simply lifts out of the rear pockets of your truck when not needed. The wire screen provides a place to tie rope or hook a bungee strap wherever you need one. SECURE YOUR TOOLBOX WITHOUT DRILLING HOLES IN YOUR TRUNK BED The Safety Rack is secured to the majority of trucks without having to drill holes through the bed rail. If your truck has a cross bed toolbox our toolbox Brackets also allow you to secure your toolbox without drilling holes. Simply place your box on these brackets and drill through the Toolbox Brackets, not your sheet metal. Instantly increases the resale value of your truck. CALL FOR OTHER ACCESSORIES. A FUNCTIONAL AND ATTRACTIVE RACK MAKES YOUR TRUCK MORE VERSATILE Part #41000 Light Bracket (10.5”x10.5”) The Safety Rack is manufactured from strong, durable pickled and oiled steel tubing and cold rolled 3/16” wire. These quality materials are then assembled on our state of the art robotic welding equipment. The screen protecting your window is a 3/16” diameter cold rolled wire that is spot welded at each intersection and robotically welded into the square tube frame. 2-41000 Light Brackets w/strobe & remote spot The Safety Rack is finished with an attractive and durable black powder coat finish. All fasteners used to secure the Safety Rack are plated with zinc dichromate meeting automakers specifications. The Safety Rack provides strength, versatility, and style that is unmatched by any other cab guard. PART # Safety Rack with accessory Rear Bar 40310 40311 40313 40501 40502 40503 40503T1 40504 40505 40506 40507 40509 40509DW 40517 DESCRIPTION Safetyrack Toy 87-TD NIS 86.5-TD S10 82+ Safetyrack Ranger 93-TD Mazda Safetyrack Dakota 97+ Safetyrack SD Ford 99+ Safetyrack Ford F-150 LD250 97+ Safetyrack Chevy 68-98 Dodge 69-93 Safetyrack T-100 93-98 Safetyrack F150 Super Crew 99-01 Safetyrack Ford 76-96 Short Bed Only Safetyrack Ford 76-96 Long Bed Only! Safetyrack Dodge 94-01 Safetyrack Chevy 99+ New Body Styl Safetyrack Chevy HD Dually 99+ Safetyrack Dodge 02+ Add the letters TB to a number to have rack w/tool box brackets. Safety Rack w/Toolbox Brackets and 91004 Arrow Stick brackets(pr) 202
