EXPRESS SOLDER SALMIAC

EXPRESS SOLDER SALMIAC
Solids flux, salt, based on zinc ammonium
chloride
Type 3.1.1.B under ISO 9454
Cat. no. 0197
Added customer value
•
•
•
•
•
Solid flux for special applications/fire metallization
Large application spectrum for soft-soldering iron, copper, and brass materials
Good handling, no dripping
Very highly activated
Flux remnants are easily removed with water
Image may differ from the original.
Technical data:
Appearance:
Density at 20 °C :
PH value (20 °C ) at 100 g/L:
Water solubility:
Residues:
White to grey, solid, in tins or pieces
2.8 g/cm³
3-5
Easily water soluble with precipitations
Must be removed
Application method
(recommended)
‣‣ Flux for special applications Conventional soft-soldering und fire metallization of iron, copper, and brass
materials
Standard packaging units (domestic):
200 g tins; additional packaging on request.. Our general terms and conditions apply.
EMIL OTTO
Flux- und Oberflächentechnik GmbH
Eltviller Landstrasse 22
65346 Eltville, Germany
Phone: +49 (0)61 23 70 46 0
Fax: +49 (0)61 23 70 46 15
www.emilotto.de