About BSC.P65

Transcription

About BSC.P65

Maintenance Tools
Hydraulic Nuts ................................................................................... 684
Mounting Methods .......................................................................................................... 684
Dimensions ...................................................................................................................... 685
Hydraulic Pump ................................................................................. 687
Spanner Wrench ................................................................................ 688
Pressed Plates ................................................................................... 689
Pullers................................................................................................. 690
NSK .................................................................................................................................. 690
Sykes Pickavant .............................................................................................................. 693
TOLEDO ........................................................................................................................... 698
Workshop Tools.................................................................................. 701
Lubrication ......................................................................................... 705
Cable Ties........................................................................................... 710
Pliers ................................................................................................... 712
Screwdrivers ...................................................................................... 716
Socket and Spanner Sets .................................................................. 717
BSC
Motion Technology
683
Hydraulic Nuts
TOOLS
Mounting Methods
Below are three different ways to use Hydraulic Nuts.
AFTER MOUNTING
BEFORE MOUNTING
1
Axial Displacement Method
Cb = Bench Clearance
Cm = Mounted Clearance
Cr = Clearance Reduction
1
Axial Displacement Method
Ds = Starting Distance
Da = Min. Axial Displacement
X = Overhang after Installed
Using Axial Displacement Pin:
Using Axial Displacement Pin:
Piston is ready to move the bearing by pushing against the inner ring. Piston has moved the bearing the minimum axial displacement.
The Axial Displacement pin is flush with the back of the nut.
2
Straight Edge Method
Using Straight Edge:
Placing a straight edge such as a wrench will show a gap.
3
Dial Indicator Method
Using Dial Indicator:
Place a dial indicator on the back of the axial displacement pin.
684
BSC
Motion Technology
2
Straight Edge Method
Using Straight Edge:
The gap has disappeared indicating the bearing has moved the
minimal axial displacement.
3
Dial Indicator Method
Using Dial Indicator:
Watch the gauge to determine the axial displacement of the bearing.
Hydraulic Nuts
TOOLS
Jack Out Bolt
Bearing Bore Size ***
Bore
Bore
Bore
Sym bol (m m )
(inch)
10
50
1.9685
11
55
2.1654
12
60
2.3622
13
65
2.5591
14
70
2.7559
15
75
2.9528
16
80
3.1496
17
85
3.3465
18
90
3.5433
19
95
3.7402
20
100
3.937
21
105
4.1339
22
110
4.3307
n/a
n/a
n/a
24
120
4.7244
n/a
n/a
n/a
26
130
5.1181
n/a
n/a
n/a
28
140
5.5118
n/a
n/a
n/a
30
150
5.9055
n/a
n/a
n/a
32
160
6.2992
n/a
n/a
n/a
34
170
6.6929
36
180
7.0866
38
190
7.4803
40
200
708740
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
44
220
8.6614
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
48
240
9.4488
n/a
n/a
n/a
52
260
10.2362
Dimensions
φ3.8” NPTF Plug
Hydraulic Nut p/n
Metric
Inch
Blank
HMV()-1 HMV()Z-1 HMV()B-1
50
49
50
55
54
55
60
59
60
65
64
65
70
69
70
75
74
75
80
79
80
85
84
85
90
89
90
95
94
95
100
99
100
105
104
105
110
109
110
115
n/a
115
120
119
120
125
n/a
125
130
129
130
135
n/a
135
140
139
140
145
n/a
145
150
149
150
155
n/a
155
160
159
160
165
n/a
165
170
169
170
180
179
180
190
189
190
200
199
200
205
n/a
205
210
n/a
210
215
n/a
215
220
219
220
225
n/a
225
230
n/a
230
235
n/a
235
240
239
240
250
n/a
250
260
258
260
Wrench
Crank Handle
Dim ensions in m m
d1
50.5
55.5
60.5
65.5
70.5
75.5
80.5
85.5
90.5
95.5
100.5
105.5
110.5
115.5
120.5
125.5
130.5
135.5
140.5
145.5
150.5
155.5
160.5
165.5
170.5
180.5
191
201
207
212
217
222
227
232
237
242
252
262
d2
84
89
95
101
107
112
117
122
127
133
138
143
149
154
159
164
170
175
180
186
191
198
204
209
215
227
239
251
256
262
267
273
280
285
291
296
307
319
d3
114
120
125
130
135
140
146
150
156
162
166
172
178
182
188
192
198
204
208
214
220
226
232
238
244
256
270
282
288
294
300
306
312
318
326
330
342
356
B
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
39
39
39
40
40
41
41
42
43
43
44
44
44
45
45
46
46
46
47
B1
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
9
9
9
D
72
76
81
88
95
100
106
110
116
122
126
130
136
141
146
151
156
161
166
171
176
183
190
195
200
212
230
241
247
252
258
263
269
274
281
285
296
308
E
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
C
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.5
13.5
14.0
14.5
14.5
15.0
15.5
16.5
17.0
17.0
17.5
17.5
18.0
18.5
18.5
19.0
19.0
19.5
20.0
Piston
Stroke
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
7
8
8
9
9
9
9
9
10
10
10
11
Properties
Piston
Area
29
31
33
36
38
40
42
45
47
49
51
53
56
58
60
62
64
66
68
73
75
81
86
89
94
103
115
125
128
134
137
144
152
155
162
165
176
188
Mass
(kg)
2.7
2.8
2.8
3.0
3.2
3.4
3.7
3.8
4.0
4.3
4.4
4.7
5.0
5.0
5.3
5.3
5.7
5.7
6.0
6.5
6.6
7.0
7.6
7.9
8.4
9.2
10.5
11.5
12.0
12.5
13.0
13.5
14.5
15.5
16.0
16.0
17.5
19.0
* Inch Threads for HMV49Z-1 to HMV258Z-1 are American National Form Class 3.
** Metric Threads for HMV50-1 to HMV200-1 are ISO 965/111-1980 tolerance class 6H.
Metric Threads for HMV205-1 to HMV260-1 are ISO 2901-1977 tolerance class 7H.
BSC
Motion Technology
685
Hydraulic Nuts
TOOLS
Dimensions
**If a seal needs replacing, the
use of NSK’s jack out bolts
make the task quick and easy.
Bearing Bore Size ***
Bore
Bore
Bore
Sym bol (m m )
(inch)
10
50
1.9685
11
55
2.1654
12
60
2.3622
13
65
2.5591
14
70
2.7559
15
75
2.9528
16
80
3.1496
17
85
3.3465
18
90
3.5433
19
95
3.7402
20
100
3.937
21
105
4.1339
22
110
4.3307
n/a
n/a
n/a
24
120
4.7244
n/a
n/a
n/a
26
130
5.1181
n/a
n/a
n/a
28
140
5.5118
n/a
n/a
n/a
30
150
5.9055
n/a
n/a
n/a
32
160
6.2992
n/a
n/a
n/a
34
170
6.6929
36
180
7.0866
38
190
7.4803
40
200
708740
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
44
220
8.6614
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
48
240
9.4488
n/a
n/a
n/a
52
260
10.2362
Metric
Thrad
**
M 50x1.5
M55x2
M60x2
M65x2
M70x2
M75x2
M80x2
M85x2
M90x2
M95x2
M100x2
M105x2
M110x2
M 115x2
M120x2
M 125x2
M130x2
M 135x2
M140x2
M 145x2
M150x2
M 155x3
M160x3
M 165x3
M170x3
M180x3
M190x3
M200x3
Tr205x4
Tr210x4
Tr215x4
Tr220x4
Tr225x4
Tr230x4
Tr235x4
Tr240x4
Tr250x4
Tr260x4
Inch Threads *
Nom inal
Threads
Diam eter per Inch
1.967
18
2.157
18
2.36
18
2.548
18
2.751
18
2.933
12
3.137
12
3.34
12
3.527
12
3.73
12
3.918
12
4.122
12
4.325
12
n/a
n/a
4.716
12
n/a
n/a
5.106
12
n/a
n/a
5.497
12
n/a
n/a
5.888
12
n/a
n/a
6.284
8
n/a
n/a
6.659
8
7.066
8
7.472
8
7.847
8
n/a
n/a
n/a
n/a
n/a
n/a
8.628
8
n/a
n/a
n/a
n/a
n/a
n/a
9.442
6
n/a
n/a
10.192
6
Axial Displacem ent
1:12 (m m ) 1:12 (m m ) 1:30 (m m ) 1:30 (m m )
m in.
m ax.
m in.
m ax.
0.45
0.55
0.60
0.70
0.70
0.85
1.75
2.15
0.75
0.90
1.90
2.25
0.90
1.10
2.25
2.75
1.00
1.30
2.50
3.25
1.10
1.40
2.75
3.50
1.30
1.60
3.25
4.00
1.40
1.70
3.50
4.25
1.60
1.90
4.00
4.75
*** Mounting directly on a tapered shaft or an adapter seeve. For inch sizes, if mounting on a removal sleeve, choose next
smallest inch size hydraulic nut. For metric sizes, if mounting on a removal sleeve, choose next smallest metric size.
n/a = ISO bearings and standard inch hydraulic nut size does not exist for mounting directly on a shaft or on an adapter sleeve.
686
BSC
Motion Technology
Hydraulic Pump
TOOLS
TYPE
HSS
HDS
ELE
AIR
=
=
=
=
Hydraulic Single Stage
Hydraulic Double Stage
Electric Powered Pump
Air Powered Pump
TANK CAPACITY
BASE NUMBER
Small
Large
PUMP
HSS
SMALL
NSK offers Hydraulic Pumps that inject oil into hydraulic
nuts during bearing installation and simplify the bearing
removal process by pumping oil between the inner ring
and journal. NSK heavy duty pumps are offered in two
sizes, are lightweight and come in a specially designed
protective carrying case.
Oil Displacement
Max
Usable
Max
Per Stroke
Pump
Working
Oil
Handle
Piston Oil Outlet
Description Pressure Capacity
Effort
Stroke
Port
Weight
inch 3
1st Stage 2nd Stage
lbs
inch
NPTF
lbs
psi
inch 3
PUMP HSS Hand Pump
LARGE
Single Speed 10,000
48
0.15
24.4
0.98
3/8" - 18
16.5
PUMP HSS Hand Pump
SMALL
Single Speed 10,000
30.15
0.18
24.4
0.98
3/8" - 18
13.44
* All pumps include a relief valve set at 10,000 psi.
** All pumps come in kits which include a pump, hose, quick disconnect, coupler (nipple), gauge, tee, extra oil and
NSK
P/N**
Pump Dimensions
inch (mm)
L
W
H
22.05
5.51
5.51
(560)
(140)
(140)
15.16
5.51
5.32
(385)
(140)
(135)
a metal case.
BSC
Motion Technology
687
Spanner Wrench
TOOLS
SIZE
BASE NUMBER
23-30 = fits AN 23-30 locknuts
HN IMPACT
23-30
Spanner wrenches are a simple and inexpensive means of
installing small size tapered bore bearings onto shafts
and adapter sleeves. Because they clamp onto the slot in
a locknut, they do not cause damage to the locknut
which frequently occurs when using a hammer and
keystock.
NSK standard spanner wrenches are made from 1/4”
(7mm) thick plates. The heads of impact spanner
wrenches are made of forged steel, which is welded to a
strong alloyed steel handle covered by easy grip rubber.
LOCKNUT P/N**
LOCKNUT SERIES
LOCKNUT NUMBER
688
NSK impact-spanner wrenches are heavy duty and can
withstand the impact force of a hammer. All wrenches
come with a convenient hole for ease of storage or
hanging.
NSK IMPACT
SPANNER
WRENCH P/N
KM HM..T HML..T HM30 HM31 AN-00 N-000
23-30
*
*
*
*
24-30 026-032 HN IMPACT 23-30
30-40
*
41-42
*
*
30-40 034-040 HN IMPACT 30-40
40-52 41-50 41-54 44-52
*
40-44 044-052 HN IMPACT 40-52
BSC
Motion Technology
Pressed Plates
TOOLS
Tri-Section
Tri-Section
Press Plates
CK3-50
CK3-100
CK3-160
CK3-260
CK3-380
CK3-50
CK3-100
CK3-160
CK3-260
CK3-380
21304
22205
22211
23120
23032
61801
61805
61811
61820
61832
CK3-50
CK3-100 NN4920
CK3-160 NN4920
CK3-260 NN3020
CK3-380 NNU49323
Part
Capacity
Number
ton A
kN (imp)
CK3-50
80
8 12
CK3-100
200 20 26
CK3-160
300 30 50
CK3-260
450 45 90
CK3-380
600 60 140
B
50
100
160
260
380
22310
22320
23232
23252
24176
6410
6320
6232
6252
6076
NN4120
NNU4132
NNU4152
NNU4176
WT
Dimensions
C
D
E
F
G
kg
mm
20 26 15
2
4
0.5
36 45 25
3
6
2.8
45 60 33
4
8
6.5
70 88 47
6 11 19.5
81 112 63
8 14 48.4
BSC
Motion Technology
689
Pullers
TOOLS
NSK
Series
Style
Type
in = pump built in cylinder
4 = straightener
5 = pump separate of cylinder
6 = pusher kit
blank = puller
3 = tri-section press plate
8 = pusher
Special Feature
blank = pump built in cylinder
H = high capacity cylinder
C = strong cobra jaw
L = long jaw
3 = kit with tri-section
press plate
Base Number
CK
Pullers, pushers, straighteners and trisection press plates are useful in the
quick, easy and safe installation and
removal of bearings, rings, pulleys and
gears. The use of these tools is helpful in
protecting the shaft, bearings and
surrounding equipment from damage.
They also help reduce the potential for
bodily harm to the operator.
NSK’s family of pullers, pushers,
straighteners and tri-section press plates
come in a full range of sizes and come
individually or in kits specifically matched
to customer needs.
NSK offers a hydraulic pusher, puller and
tri-section press plate in a single heavy
duty case making transportation and
storage more convenient as well as
reducing the possibility of lost parts.
Pullers are available in noninterchangeable standard and high
capacity designs. The high capacity
design includes a high pressure cylinder
and cobra jaw. Hydraulic pullers and
pushers from NSK incorporate course
threads which make it easier and quicker
to assemble than competitive bearing
removal products.
690
BSC
Motion Technology
3
-6
in
HCL
Pullers
TOOLS
NSK
PULLER
PULLER/
STRAIGHTENER
PUSHER
CK-10in is sold separately from CK-104A
BSC
Motion Technology
691
692
CK-6sd
CK-6in
CK-6inL
CK-6inHC
CK-6inHCL
CK-6in3
CK-6in3H
CK-8in
CK-8inL
CK-8inHC
CK-8inHCL
CK-8in3
CK-8in3H
CK-10in
CK-10inL
CK-10in3
CL-11inHC
CK-11inHCL
CK-11in3H
CK-12inHC
CK-12inHCL
CK-15inHC
CK-25
CK-25C
CK-25CL
CK-105
CK-105L
CK-105HC
CK-105HCL
CK-135HC
CK-135HCL
CK-155HC
CK-104
CK-104A
CK-104B
CK-130
CK8-270
CK8-270A
CK8-270C
CK8-270G
Part Number
Jaw**
Cylinder
Capacity
Std.
Cobra
(kpsi)
Case*
ton (imp) Std. L S L 10 12 CB M PE W
kN
60-65
6-6.5
•
•
•
60-65
6-6.5
•
•
•
60-65
6-6.5
•
•
•
100-105 10-10.5
•
•
•
100-105 10-10.5
•
•
•
60-65
6-6.5
•
•
•
100-105 10-10.5
•
•
•
80-85
8-8.5
•
•
•
80-85
8-8.5
•
•
•
120-125 12-12.5
•
•
•
120-125 12-12.5
•
•
•
80-85
8-8.5
•
•
•
120-125 12-12.5
•
•
•
150-155 15-15.5
•
•
•
150-155 15-15.5
•
•
•
150-155 15-15.5
•
•
•
200-205 20-20.5
•
•
•
200-205 20-20.5
•
•
•
200-205 20-20.5
•
•
•
250-255 25-25.5
•
•
•
250-255 25-25.5
•
•
•
300-305 30-30.5
•
•
•
400-405 40-40.5
• •
•
•
400-405 40-40.5
•
•
•
400-405 40-40.5
•
•
•
150-155 15-15.5
•
•
•
150-155 15-15.5
•
•
•
175-180 17.5-18
•
•
•
175-180 17.5-18
•
•
•
225-230 22.5-23
•
•
•
225-230 22.5-23
•
•
•
250-255 25-25.5
•
•
•
150-155 15-15.5
•
150-155 15-15.5
•
150-155 15-15.5
•
•
80
8
•
120
12
•
•
80
8
•
•
120
12
•
•
•
BSC
Motion Technology
•
•
•
•
•
•
•
•
•
•
•
Reach
Dimensions
Spread Stroke
A
B C D
E
mm
mm
152
30/150
55
11
6 22 32 53
152
30/200
82
11
6 22 32 83
190
30/200
82
11
10 25 51 83
182
280
82
11
6 22 32 113
220
280
82
11
10 25 51 113
152
30/200
82
11
6 22 32 83
182
280
82
11
6 22 32 113
190
30/250
82
11
10 25 51 83
229
30/250
82
14
10 29 51 83
220
305
82
11
10 25 51 113
259
305
82
14
10 29 51 113
190
30/250
82
11
10 25 51 83
220
305
82
11
10 25 51 113
229
280
82
14
10 29 51 83
300
280
82
30
28 33 75 83
229
280
82
14
10 29 51 83
259
356
82
14
10 29 51 113
300
356
82
30
28 33 75 113
259
356
82
14
10 29 51 113
300
406
110
30
28 33 75 140
375
406
110
27
36 38 78 140
375
50/540
110
27
36 38 78 170
250
165
405
800
250
30
38 28 76
635
1200
250
30
38 28 76
229
280
82
14
10 29 51 83
300
280
82
30
28 33 75 83
259
356
82
14
10 29 51 113
300
356
82
30
28 33 75 113
300
406
110
30
28 33 75 140
375
406
110
27
36 38 78 140
375
540
110
27
36 38 78 170
150
100/410
82
205
100/410
82
32
17 35
150/205 100/410
82
32/60 17 35
-450
36-130
30 188 90 230 30
-440
58-270
82
35 193 90 230 58
-440
58-270
82
-440
58-270
82
•(CK3-160)
-440
58-270
82
Safety
Tri-section
Bag*** Pusher Puller
Press
Plate
B
M
•
•
•
•
•
•
•
•
•
•
•
•
•(CK3-100)
•
•
•(CK3-100)
•
•
•
•
•
•
•
•
•
•
•(CK3-160)
•
•
•(CK3-160)
•
•
•
•
•
•
•(CK3-160)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
160
130
60
60
60
60
70
70
74
42
42
42
42
42
42
42
50
50
50
50
50
50
60
60
60
60
60
60
70
70
74
110
F
G WT
kg
25 5.0
25 5.5
25 6.3
25 6.7
25 7.6
25 9.1
25 9.5
28 7.3
28 8.1
25 9.2
25 10.7
28 13.8
25 15.7
35 9.3
35 12.9
35 15.8
35 12.0
35 14.2
35 18.6
45 19.3
45 24.3
55 32.4
71 88.7
57.2
72.2
35 13.8
35 17.3
35 16.4
35 18.6
45 23.8
45 28.7
55 31.6
60 10.4
9.1
60 14.6
35 7.5
35 12.3
15.4
14.4
30.9
TOOLS
Pullers
NSK
Pullers
TOOLS
Sykes Pickavant
HYDRAULIC PULLERS
1500 Series Triple Leg Hydraulic Pullers
Standard Leg
Part No.
Puller Spread
Max
Puller Reach
Max
Ram Extension
153400
100mm
100mm
50mm
153600
150mm
150mm
100mm
150mm
153700
150mm
250mm
153800
200mm
100mm
150mm
153900
250mm
250mm
150mm
Each part number contains
1 x Hydraulic Ram
1 x Triple Head Assembly
1 x Ram Extension
3 x Legs
1500 Series Puller and Separator Kits
• Use 1500 series hydraulic ram to deliver 8 tonnes pulling force with ease.
• Strong, drop forged steel legs tighten as load is increased for safe, positive grip.
• Separators have tapered edge for insertion behind close fitting bearings, gears etc.
Standard Leg
Part No.
Puller Reach External Spread External Reach
Max
Max - Min
Max
155200
Puller Spread
Max
150mm
150mm
105 - 20mm
876mm
155208
200mm
200mm
105 - 20mm
876mm
155305
250mm
250mm
105 - 10mm
876mm
155200
Part No Hydraulic Puller / Separator Kit
155200
• Makes 4 hydraulic pullers and 1 separator.
• In lockable metal case.
155208
• Makes 6 hydraulic pullers and 1 separator.
• In lockable metal case.
155305
• Two puller panels combined - 155105 plus 193105.
• Makes 8 hydraulic pullers, 1 mechanical puller,
2 separators and 7 split collet internal extractors.
• Metal storage/display panel complete with hooks
(also available separately - see individual panels).
BSC
Motion Technology
693
Pullers
TOOLS
Hydraulic
MECHANICAL KIT BUILD
Twin/Triple Leg Pullers
Extractor Kit Build
Part No. 082705
Part No. 082805
Part No. 082900
Part No. 082903
Part No. 095800
Part No. 095801
Part No. 084200
Part No. 095802
Multipull® Blind Housing Bearing Removers
Part No. 098000
1
5.5mm
1
5.5mm
2
6mm
2
6mm
Part No. 095803
3
8mm
3
8mm
Part No. 098100
1
5.5mm
4
9mm
1
5.5mm
4
9mm
2
6mm
5
11mm
2
6mm
5
11mm
3
8mm
3
8mm
6
12.5mm
6
12.5mm
Part No. 095803
Part No. 098200
7
16mm
10
25mm
694
BSC
Motion Technology
7
16mm
10
25mm
8
19mm
8
19mm
9
22mm
11
28mm
11
28mm
12
31.75mm
9
22mm
12
31.75mm
Pullers
TOOLS
Hydraulic
HYDRAULIC KIT BUILD
1500 Series Triple Leg Hydraulic Pullers
Part No. 153400
Part No. 153600
Part No. 153800
Part No. 153900
Part No. 153700
1500 Series Puller and Separator Kits
Part No. 155200
Part No. 155208
BSC
Motion Technology
695
Pullers
TOOLS
Mechanical
MECHANICAL PULLERS
Twin/Triple Leg Pullers
• Twin and triple beams and double ended legs for a wide range of pulling options.
No. of Puller
Combinations
Leg Style
Part No.
Max Puller
Spread
082705
150mm
80mm
4
082805
200mm
140mm
4
084900
200mm
140mm
8
084903
200mm
140mm
8
Max Puller
Reach
Double Ended Reversible
Double ended legs for internal and external use
Double Ended Reversible & Standard Adjustable
084200
350mm
380mm
12
3 positions, adjustable legs for increased pulling options
Bearing Separators
• Individual separators for removing and refitting bearings, etc.
Part No
Part No.
095000
External Spread
Max -Min
55mm
095100
105 - 20mm
095200
140 - 35mm
095300
175 - 50mm
Usage
095000
Can be used with 083000 Twin Leg Puller
or 094000 Twin Leg Pulling Unit.
095100
Use with 083100 Twin Leg Puller.
095200
Can be used with 083200 and
083300 Twin Leg Pullers.
095200
Can be used with Sykes-Pickavant ‘Loadstar’ Heavy Duty Pullers
and also 1200 and 1600 series pullers.
Internal Extractor Kits
• Extract components quickly and efficiently when conventional pullers cannot be used.
• Removes gears, bearings, pinions, oil seals etc.
• Can be upgraded for twin/triple leg pulling.
Part No.
095801
095804
095802
095803
095800
696
External Spread
Max -Min
13mm
6mm
22.5mm
8mm
30mm
13mm
60mm
30mm
60mm
6mmm
No. of
Split Collet
Extractors
3
4
3
3
9
BSC
Motion Technology
Pullers
TOOLS
Mechanical
MECHANICAL PULLERS
Extractors and Pulling Units
Part No. 095805
Twin Beam Pulling Unit
Part No. 085421
Slide Hammer Assembly - 1kg
• Twin beam mechanical puller for
use with Sykes-Pickavant split
collet type internal extractors.
• For use with Sykes-Pickavant split
collet type internal extractors.
• Hammer displacement 220mm.
• Hammer weight 1kg.
Split Collet Internal Extractors
Part No.
095809
095810
095811
095812
095813
Internal Spread
Max -Min
8.5mm
6mm
11mm
8mm
13mm 10.5mm
18mm
13mm
22.5mm 18mm
Part No.
095814
095815
095816
095817
Internal Spread
Max -Min
30mm 22.5mm
38mm
30mm
50mm
38mm
60mm
50mm
Multipull® Blind Housing Bearing Removers
These special pullers will remove blind housing bearings without the
need to dismantle machinery or remove the running shaft.
• Positive seating allows even tension on inner and outer bearing rings,
reducing resistance.
• Stabilisers reduce sideways movement and self-centre the puller.
• 3 kits cover a wide range of ISO bearings. (To identify kit for
bearings without an ISO reference, refer to puller spread and
adapter diameter).
098100
098000
Part No. Max Spread Min Spread Adaptor Dia. Puller Reach
mm
mm
mm
mm
098000
95
20
5.5 - 8
125
098100
117
20
5.5 - 12.5
415
098200
210
56
16 - 31.75
490
ISO Bearing Designation
098000 6004 - 6010 6299 - 6205 6300 - 6302
098100 6004 - 6015 6200 - 6211 6300 - 6307 6403 - 6404
098200
6212 - 6222 6308 - 6319 6405 - 6414
098200
BSC
Motion Technology
697
Pullers
TOOLS
TOLEDO
MECHANICAL PULLERS
Toledo Mechanical Pullers are manufactured from drop forged Chrome Vanadium alloy steel. Designed for easy removal of
bearings, pulleys, gears and sprockets. All Toledo Mechanical Pullers are double ended and available in two or three leg.
Suitable for internal and external applications.
Twin Leg Pullers
Triple Leg Pullers
Part No.
Spread
Reach
Part No.
Spread
Reach
222030
75mm
60mm
223030
75mm
60mm
222040
100mm
70mm
223040
100mm
70mm
222060
150mm
120mm
223060
150mm
120mm
222080
200mm
175mm
223080
200mm
175mm
222100
250mm
190mm
223100
250mm
190mm
222120
300mm
215mm
223120
300mm
215mm
Adjustable Twin Leg Sliding Beam Pullers
• Drop forged Chrome Vandium alloy steel.
• Reversable legs suitable for internal and external applications.
Part No. 245460
Long Jaw Bearing Puller
• Designed for internal/external applications
requiring reach up to 300mm and spread
capacity 10-15mm.
• Drop forged hardened alloy steel.
Part No.
Spread
Reach
232080
80mm
90mm
232120
120mm
90mm
232160
160mm
140mm
Part No.
Spread
Reach
232200
200mm
140mm
245460
10-50mm
300mm
Part No. 221000
Mechanical Bearing Separator Puller Set
• Complete with two bearing separators
(30-50mm, 50-75mm).
• Designed for access behind bearing
for easy bearing removal.
Part No. 222000
Mechanical Bearing Puller Set
• Complete wit bearing separator, main rods, extension rods and beam designed
for access behind bearings utilising a mechanical forcing screw
(Separator Capacity 75-105mm).
• Suitable for large bearing removal.
Contents
Contents
1 x Forcing Screw
1 x Forcing Screw
4 x Extension Rods
2 x Extension Rods
1 x Beam
1 x Beam
4 x Main Rods
2 x Main Rods
2 x Separators
1 x Separators
1 x Thread Reducer
698
BSC
Motion Technology
Pullers
TOOLS
Part No. 224000
Mechanical Bearing Separator Puller Set
• Designed for small bearing removal.
• Mini puller designed for small bearing
removal, electric motors etc.
Contents
1 x Forcing Screw
TOLEDO
Part No. 225000
Mechanical Twin Pull Puller Set
• Enables removal of bearing where access is
limited.
• Designed for small bearing removal,
electric motors etc.
• Spread: 20-95mm
Reach: 125mm
2 x Extension Rods
Contents
1 x Beam
1 x Forcing Screw
2 x Main Rods
2 x Extension Rods (small)
2 x Legs
1 x Beam
1 x Bearing Separator
2 x Main Rods
2 x Extension Rods (large)
6 x Insert Adaptors
Part No. 246600
Micro Adjustable Bearing Puller
• External puller designed for rapid bearing removal of a wide
range of applications, including electrical motors, starter motors,
alternator bearings, pumps, domestic appliances and power tools.
• Self centres under load.
• Spread: 19-45mm
Reach: 73mm
Part No. 246300
Collet Puller Set (8 Collets)
• Split collet slide hammer internal bearing
puller where access exists in centre
of bearing.
• Expanding split collet tightens to
grip on underside of bearing
(complete with 8 sizes
of collets).
Bearing Separators
• Designed for removing gears and bearings where access is available behind the item. Two knife edges ensure a
secure pulling surface.
• Drop forged hardened alloy steel, used in conjunction with 2 leg mechanical pullers, hydraulic pullers
or sliding beam applications.
Part No.
Capacity
245040
20-40mm
245050
30-50mm
245075
50-75mm
245105
75-105mm
245150
105-150mm
BSC
Motion Technology
699
Pullers
TOOLS
TOLEDO
HYDRAULIC PULLERS
Toledo Hydraulic Pullers are manufactured from the highest quality materials. All legs and bearing separators are drop forged
Chrome Vanadium alloy steel. Designed for easy removal of bearings, pulleys, gears and sprockets.
Part No. 266000
Heavy Duty Hydraulic Bearing Puller Set
Combination Twin / Triple Leg Pullers
• Toledo hydraulic pullers combination 2/3 leg puller offer the versitility
of either a twin or triple puller.
• The hydraulic ram ensures maximum force with minimal effort.
Part No.
Spread
Reach
265040
50-100mm
100mm
265060
75-150mm
150mm
265080
100-200mm
200mm
• Heavy duty set complete with bearing separator, main rods, extension
rods and beam.
• Designed for access behind bearing utilising the 10 tonne hydraulic ram
(separator capacity 105-150mm).
• Suits large bearing removal..
Contents
1 x Ram
2 x Main Rods 5/8”
2 x Extension Rods 5/8”
1 x Beam
1 x Separator
1 x Nose Piece Set (3 pce)
1 x Adaptor
Part No. 267000
Hydraulic Bearing Puller Set
• Toledo hydraulic puller set complete with bearing separator, main rods,
extension rods and beam.
• Designed for access behind bearing utilising the 10 tonne hydraulic ram.
(Separator capacity 75-105mm).
• Ideal for general maintenance.
Contents
1 x Ram
1 x Beam
1 x Separator
Part No. 265000
Hydraulic Bearing Puller Set
• Toledo hydraulic bearing puller set complete with bearing separator,
main rods, extension rods, twin/triple head, beam and
legs to build 4”, 6”, 8” two and three leg hydraulic pullers.
• Ideally suitable for Industrial, Automotive, Agricultural and
Marine applications and for general maintenance.
• Separator capacity 75-105mm.
Contents
1 x Ram
1 x Beam
1 x Center Nut
1 x Separator
1 x Twin Head
1 x Triple Head
9 x Legs
700
BSC
Motion Technology
Workshop Tools
TOOLS
Spare Parts Cleaning Brush
Part No. 301004
Part No. 301019
Pocket Magnetic Pick-up Tool
• Extends from 125mm to 635mm.
• Magnet capable of picking up 2.5kg.
• Ideal for cleaning
engine and transmission
spares, brake parts and bearings.
• 260mm x 25mm.
Air Blow Gun
Part No. 301005
• High impact plastic body, built-in hanger slot.
• Angle tip 100mm.
• Improved valve and comfortable lever control.
• Inlet thread size 1/4” NPT.
• Stainless steel body, 150mm long.
• Lever actuated in conjunction with a
ratchet type collar .
to 5mm.
Magnetic Stainless Steel Tray
• 150mm x 38mm deep with strong in-built magnet.
• Stow small parts, nuts, bolts and screws
neatly and securely during dismantle and
Part No. 301033
Tube Cutter
• Hardened SK2 cutting wheel.
• Wide dual rollers provide neat, square cuts.
• Suitable for plastic, brass, copper, aluminium,
and mild steel tubing between 3-30mm.
reassembly
.
Gasket Scraper
Part No. 301007
• Removes gasket residue, carbon
Oil Seal Remover
Scraper and Hook Set
Part No. 301008
• Useful trade quality set.
• Two sizes of scraper for scraping jobs in
Description
Part No. 301157
Feeler Gauge
• 26 Blade Cranked Metric/Imperial.
• Cranked blade 45o angle allows
open or confined spaces.
• Pick it, prod it, scratch it!
Length
1
Multi Purpose Scraper
285mm
1
Multi Purpose Scraper
210mm
1
Scratch Awl
200mm
1
Cotter Pin Puller
225mm
1
Radiator Hose Remover
175mm
Part No. 301009
Part No. 301042
• Removes oil and grease seals.
• Complete with two removal hooks.
• Length 310mm.
and ingrained dirt.
• Ideal scraping tool.
• Size: 280 x 25mm
Qty
Hose Crimping Tool 150mm
• Can accomodate hose from 12mm
Fast, safe and easy to use.
Part No. 301006
Part No. 301026
Stethoscope
• Economical sonic diagnostic unit, locates
access to restricted areas.
• Size range (metric)
0.127mm-0.762mm and
(imperial) 0.003”-0.030”
Part No. 301160
Feeler Gauge
• 16 Blade Metric/Imperial.
• Size range (Metric) 0.05mm-0.38mm
and (Imperial) 0.002” - 0.015”
noise in machinery, engines, compressors,
transmissions and drive trains etc.
• 740mm long, 220mm probe extension.
Thread Files
Part No. 301011
Pocket Telescopic Mirror
• Restoration tool for damaged or
corroded threads.
• Repairs almost any diameter bolt
or stud.
• Handles left or right handed threads.
• 230mm long, ideal for working in confined areas.
• Telescopic body extends from a pocket size 184mm to 500mm.
• 25mm x 50mm oval swivel mirror head.
Part No
Description
301065
Metric
0.80, 1.00, 1.25, 1.5, 1.75, 2.00 and 3.00
Pitch sizes
301066
SAE
24-20-18-16-14-12-11-10
BSC
Motion Technology
701
Workshop Tools
TOOLS
Part No. 301075
Stud Extractor Set
• Six piece set.
• Quick and easy way to remove broken studs.
• SAE/Metric.
Aviation Snips
• Manufactured with drop forged, Chrome Moly steel.
• Blades are scientifically heat treated for strength,
toughness and durability.
• Cuts up to 18 gauge, cold rolled sheet steel.
• Double serrated blades.
Part No.
Description
Colour
Left Cut
Red
301121
Straight Cut
Yellow
301122
Right Cut
Green
301120
Part No. 301083
Pry Bar Set 4 piece
• Manufactured from top quality alloy steel for strength
and durability.
• Four piece set containing lengths: 200mm,
300mm, 450mm and 600mm.
Adjustable Wrenches
• Fully hardened and tempered.
• Chrome Vanadium steel.
Scribers
• Double ended with knurled
nurled body.
• For marking and scoring.
ring.
Part No.
Description
Length
MS7
Standard Scriber
190mm
Heavy Duty Scriber
230mm
MSH8
Torque Wrenches
•
•
•
•
Slim head, reversible, click stop type.
Heavy duty cam.
Locking handle mechanism.
Ideal for automatic transmission service.
Part No.
Dual Scale
301097
20-200 ins/lbs
2.5-25 Nm
1/4” Dr
301098
10-80 ft/lbs
12-108 Nm
3/8” Dr
301099
10-150 ft/lbs
12-203 Nm
1/2” Dr
Part No. 301107
Size
Part No.
Length
88100
100mm
Jaw Opening
88150
150mm
21mm
88200
200mm
25mm
13.5mm
88250
250mm
29mm
88300
300mm
34.5mm
45mm
88375
375mm
88450
450mm
55mm
88600
600mm
64mm
Part No. MG10
Multi Grip Plier
• Drop forged alloy steel.
• Length 250mm.
Socket Rail Holder
• Colour coded socket organiser.
• Easy identification
Locking Grip Pliers
of missing tools.
• Drop forged alloy steel.
Part No.
Length
VG180
180mm
VG250
250mm
Part No. 301108 Spanner Rack Organiser
• High impact plastic.
• Ideal for wall, shadow board or tool chest.
• Suitable for open end, ring or combination spanners.
• 300mm overall length.
Part No. 301141
Circlip Plier Set Replacement Tips
• Designed to exchange jaws easily.
• Internal and external use.
• Complete with 90 o, 45o and two
Hex Key Ball Point Setss
• Long style with ball points.
• Available in Metric and AF.
Part No.
HKM
HKAF
702
Description
7 piece metric
7 piece AF
straight tips (1.2mm & 1.5mm)
Part No.
Size
2.5mm - 10mm
3/32” - 3/8”
BSC
Motion Technology
Description
301144
Tips straight 1.2mm
301145
Tips straight 1.5mm
301146
Tips Angle 90 1.5mm
301147
o
o
Tips Angle 45 1.2mm
Workshop Tools
TOOLS
Circlip Pliers
Bearing & Oil Seal Installation Kit
Part No. 301350
• Professional quality.
• Heat-treated, drop forged steel.
• Easily removes and installs circlips.
• Eliminates damage to bearings and seals.
• Cones may be used either side.
• Comprising nine tapered driving
301125
cones between 40 and 80mm plus
Part No.
Decription
Length
301125
Internal Straight tips
127mm
301126
Internal 90 o tips
127mm
301127
External Straight tips
127mm
a screw attachable driver shaft of
140mm in length.
• Compact, fully functional kit.
301126
301128
External 90 tips
127mm
Code
301129
177mm
1
301351
40mm
301130
o
Internal 90 tips
177mm
2
301352
44mm
301131
177mm
3
301353
50mm
301354
60mm
o
301127
Part No
Size
301132
External 90 tips
177mm
4
301133
228mm
5
301355
63mm
301134
o
Internal 90 tips
228mm
6
301356
65mm
301135
228mm
7
301357
72mm
8
301358
76mm
9
301359
80mm
10
301360
140mm
301136
o
o
External 90 tips
301128
228mm
Heavy Duty Circlip Pliers Straight Tips
301137
Part No.
Decription
Length
301137
10-25mm range
152mm
301138
18-48mm range
203mm
Heavy Duty Circlip Plier Set
Part No. 301800
• Manufactured from heavy gauge tempered steel.
• Converts to internal and external.
• Set contains one Internal and
one External Circlip Plier.
• Replaceable tip set features 16
different arrangements for the safe
and easy removal and replacement
301138
of circlips, internal and external.
• Spread of 75mm, length of 270mm.
Heavy Duty Circlip Pliers 90o Tips
• Manufactured from heavy gauge tempered steel.
• Converts to internal and external.
Part No.
Decription
301139
Length
301139
10-25mm range
127mm
301140
18-48mm range
177mm
301140
Part No.
Tip Size
Tip Angle
Qty
Part No.
Tip Size
Tip Angle
301801
2.8mm
Straight
2
301805
3.0mm
Straight
2
Qty
301802
2.8mm
15 o
2
301806
3.0mm
15 o
2
301803
2.8mm
45
o
2
301807
3.0mm
45 o
2
301804
2.8mm
90 o
2
301808
3.0mm
90 o
2
Stainless Steel Rules
• Highest Precision, hardened stainless steel.
• Accurate to JIS B 7516 - Grade one specifications. Satin chromed for rapid reading.
• Markings photographically etched. Each rule supplied in protective pouch.
Metric and Imperial Stainless Steel - Single Sided
Part No.
150A6
Metric and Imperial Stainless Steel - Double Sided
Part No.
Length
Width
150B6
150mm
15mm
Description
Length
150mm
Width
15mm
Description
One Square and one rounded end with hanging hole
Metric Stainless Steel - Single Sided
Part No.
Length
Width
150BM
150mm
15mm
30012
300mm
25mm
300M
300mm
25mm
60024
600mm
30mm
600M
600mm
30mm
100036
1000mm
35mm
1000M
1000mm
35mm
Description
BSC
Motion Technology
703
Workshop Tools
TOOLS
Part No. 301181
Heavy Duty Pin Punch Set
• Made from high quality
carbon steel.
• Heavy duty tool roll.
• Set of seven.
Part No. 301183
Heavy Duty Chisel Set
Part No. 301184
Chisel and Punch Set
carbon steel.
• Heavy duty
• Set of seven.
Punch and Chisel Set
• High quality alloy steel chisels and carbon steel punches.
• Set of 13.
704
Extra Long Pin Punch Set
carbon steel.
• Set of five.
carbon steel.
• Set of six.
Part No. 301185
Part No. 301182
BSC
Motion Technology
C Hook Wrenches
• Designed for use with
slotted retaining rings
• The hinge facility allows use
on a range of diameters
• Use on castellated nuts
on hydraulic equipment
or othe rmachinery
with slots around the
circumference.
Part No.
Decription
315150
Standard
Size
315151
Standard
1 1/ 4” - 3”
315152
Standard
2” - 4 3/ 4”
315153
Standard
4 1/ 2” - 6 1/ 4”
315154
Pin Style
315155
Pin Style
1 / 4” - 3”
315156
Pin Style
2” - 4 3/ 4”
3
3
/ 4” - 2”
/ 4” - 2”
1
Lubrication
TOOLS
TOLEDO GREASE GUNS AND ACCESSORIES
Part No. 305221
Heavy Duty Pistol Grease Gun
•
•
•
•
Part No. 305222
Deluxe Mini Pistol Grease Gun
For use in confined or restricted spaces
Release air by a half turn of the head assembly
Extra port for adding bulk loader fitting
Heavy duty aluminium die cast head with
non-slip textured powder coated finish and
plated pistol handle
• Single hand operated pistol grip grease
gun with convenient pull type
operating mechanism
• Textured powder coated finish for
non-slip grip
Outputs: Delivers 0.4g per stroke
(0.6oz per 40 strokes)
Output: Delivers 0.4g per stroke
0.6oz per 40 strokes)
Pressure: 3,500 PSI (240 Bar)
Multiple
Loading
Aluminium die cast
head has 2 output
parts. Front part
generally used for
regular greasing
applications.
Multiple
Loading
Cartridge
Suction
Cartridge
Suction
PartNo.
Description
Cartridge
Capacity
Bulk
Capacity
Thread
PartNo.
Description
Cartridge
Capacity
Bulk
Capacity
Thread
305221
With 100mm(4”) Steel Extension,
300mm(12”) Flexible Hose
and 4 Jaw Coupler
450g
650cm3
1/8”
BSPT
305222
With 100mm (4”) Steel Extension
and 4 Jaw Hydraulic Coupler
85g
120cm3
1/8”
BSPT
Part No. 305219
Heavy Duty Lever Action Grease Gun
Part No. 305227
Suction Gun
Single piece aluminium die
cast head for leak proof
operation
• Heavy duty grease guns
designed for continuous and
demanding industrial applications
• Texture powder coated finish for non-slip grip
Output: Delivers 1g per stroke (1oz per 28 strokes)
• Designed to transfer gear oils in and out of
gear boxes, transfer cases and differentials
•
•
•
•
Multiple
Loading
Cartridge
PartNo.
305219
Suction
Bulk
Description
With Steel Extension, Flexible Hose
and Coupler
Lip seal provides maximum suction
Powder coated, textured steel barrel for firm grip
No priming required
Suitable for use with non-corrosive liquids
Cartridge
Capacity
Bulk
Capacity
Thread
PartNo.
450g
650cm 3
1/8”
BSPT
305227
Description
With 300mm (12”) Flexible Vinyl Hose
Push Type Mini Grease Gun
Hydraulic Couplers - 4 Jaw
(General and Marine)
For Hand Operated Grease Guns Only
• Acrylic barrel withstands
temperature variations
450g
• Heat treated, fully hardened spring
steel jaws for longer service life.
• See-through barrel provides a
clear view of grease volume
General
• Fitted with universal connector
that adapts to most grease fittings
• Handy disposable grease gun
ideal for DIY use
PartNo.
Capacity
• Incorporates a spring loaded ball
check mechanism which helps
retain pressure.
• 4 Jaw allows greater working angle.
Marine
Capacity
PartNo.
305225
With Ball Bearing Grease (NLG1-Grade 2)
Description
General
56g(2oz)
305226
With Calcium Complex Water Repellent Grease
Marine
56g(2oz)
Description
Thread
Pressure
305231
4 Jaw Hydraulic Coupler
1/8” BSPT
6,000 PSI (423 Bar)
305232
4 Jaw Hydraulic Coupler HD
1/8” BSPT
10,000 PSI (690 Bar)
BSC
Motion Technology
705
Lubrication
TOOLS
TOLEDO GREASE GUNS AND ACCESSORIES
TOLEDO TOOLS, ACCESSORIES & OIL CANS
Heavy Duty Flexible Grease Hoses
Part No. 305381
Oil Drain Pan (6.6 litres)
Acc DIN 1283 For Hand Operated Grease Guns Only
• Superior construction - inner tubing is polyamide with
polyurethane sheathing, reinforced diagonally in highly
tear resistant polyester
• Suitable for use with fuel oils,
mineral oils, synthetic,
antifreeze, etc
• Heavy duty zinc plated end connections hydraulically
crimped to the hose
• Resistant to most chemicals,
solvents and even hot oil
• Rolled threads for extra strength
Diameters: Inner-4.1mm (0.16”)
Outer-10.8mm (0.425”)
• Made of durable high density
polyethylene with UV stabilizer
• Dimensions: 35.5cm (dia.) x 10cm (depth)
Pressures: Working pressure
5,800 PSI (400 Bar)
Burst pressure 13,775 PSI
(950 Bar)
PartNo.
Description
Part No. 305248
Drum Lid Opening Wrench (Non Sparking)
Length End to End
305234
Heavy Duty Grease Hose
300mm (12”)
305235
450mm (18”)
305236
500mm (20”)
Grease Injector Needles
• Manufactured from
cast aluminium (LM25)
• Designed to fit into most 2”
and 3/4” drum plugs
For Hand Operated Grease Guns Only
Stainless Steel - Needle Length 38mm (11/2”)
• Wrench is hardened and tempered for
increased strength
• Compact design for easy storage
Drum Dollies
• Lubricates in very tight spaces such as universal joints and sealed bearings
• With standard grease fitting (without ball check) and protective plastic holder
PartNo.
Description
• Extra heavy-duty design, wide steel in premium powder coated finish
• H.D.Steel construction, phenolic casters on p/n 305383
• H.D.Steel construction, steel cross brace, cast iron casters on p/n 305265
Needle Thickness
305237
Grease Injector Needle
18 gauge
305238
Grease Injector Needle
21 gauge
Part No. 305230
Bearing Packer
• For use with grease guns, the
design incorporates grease nipple
at one end which easily adapts
to the grease gun coupler
305265
• For bearings in cars, boats,
trailers, 4WD’s etc.
• Rugged bearings in cars, boats,
trailers, 4WD’s etc.
• May be used for regular greasing applications
as well or in conjunction with a flexible hose
305383
PartNo.
Warning: Always use recommended grade of grease.
Some grades of grease cannot handle temperatures of wheel bearing applications.
Do not use compressed air for cleaning the bearing prior to use with the bearing packer.
This is unsafe and could damage the race.
706
BSC
Motion Technology
Description
Capacity
305383
60 Litre Drum Dolly
Holds drums of diameter 380mm (15”)
305265
205 Litre Drum Dolly
Holds drums of diameter 584mm (23”)
Lubrication
TOOLS
TOLEDO TOOLS, ACCESSORIES AND OIL CANS
• Seamless and made from heavy gauge tin coated sheet with a powder coated finish
• Deluxe brass suction pumps with two ball valves for large volume delivery per stroke
• The suction valve at the bottom of the pump has no spring to prevent sticking
valve due to resinous oil
• Available with rigid shaft or combination flexible and rigid shaft
PartNo.
Description
Capacity
Rigid Spout Size
Flexi Spout Size
125mm (5”)
150mm (6”)
305258
Lever Type, Rigid and Flexible Spout
300ml/10 oz
305259
500ml/16 oz/1 Pint
305260
700ml/23 oz
150mm (6”)
175mm (7”)
175mm (7”)
200mm (8”)
TOLEDO PUMPS
Part No. 305251
Rotary Drum Pump
Part No. 305252
Lever Action Drum Pump
• Suitable for use with oil based
fluids, heating oils, motor oils,
heavy and light oils
• Specifically designed for heavy
duty applications
• Fits 50 litre to 205 litre drums
• With a curved metal spout and telescopic
suction tube, 1 1/2” and 2” bung adaptor.
• Not recommended for use with water based
fluids, solvents, acids and anti-freeze
Output: 300ml (10 oz) per stroke
• Suitable for transfer of diesel and
non-corrosive petroleum based fluids of
light to medium viscosity
• Sturdy cast iron pump housing with
two heavy duty cast iron vanes for
better draw and smoother delivery
• Hi Nitrile rubber seals
• With telescopic Suction Tube.
• Fits 50 litre to 205 litre drums
Dual Directional Operation:
Pumps in either direction by reverse
turning the handle
Output: 5 Litres per 20 turns
(Note: as measured with diesel)
“Ezee Flo” Pumps
Description
Drum Capacity
Pump Length
Rigid Steel Spout
20 litres
325mm
305255
Rigid & Flexible Hose & Spout
20 litres
325mm
The Rieke adaptor
conveniently screws
on the plastic pull out
Rieke spout
BSC
Motion Technology
305255
PartNo.
305254
305254
• Suitable for transferring engine oils, gear oils, diesel, 100% antifreeze and light fuels
• A versatile hand lift pump engineered for use on 20 litre containers with
Rieke or regular openings
• Heavy duty steel suction tube with the pump head made from high density
polyethylene
• Interchangeable Bung Adaptors:
The standard bung can be slid over the pump, when using on containers with
external threading. Alternatively when using the pump on containers with plastic
pull out Rieke spout, the other bung adaptor for Rieke spout can be used
• Pump length can be extended by 19mm (3/4”) for use on high depth containers
by conveniently sliding on a special plastic extension at the suction end.
This makes the pump suitable for larger drum sizes
• Designed for use on 20 litre containers. Available with rigid steel spout or with
1220mm (48”)discharge hose fitted with curved metal spout at discharge end
• Not recommended for use with water based and other corrosive materials
• Pump head has provision for draining back excess oil into the container when
using the pump with standard bung adaptor
Output: 1 litre (1 quart) per 15 strokes
707
Lubrication
TOOLS
TOLEDO GREASE NIPPLES
• Made from – EN-1A steel with yellow zinc coating and 303 Stainless steel
• Manufactured to the most stringent quality standards – QS9000 approved manufacturing
• Nipple profile and dimensions are accurately controlled and conform to the SAE, DIN, BS, JIS and IS standards
• Nipples with ball check use heat treated springs for increased life
• Stainless steel nipples have stainless steel ball
• Grease nipples are heat treated to SAE J534 specification
Description
Hex Size
Steel
Part No.
Qty
Steel
Part No.
Qty
Stainless Steel
Part No.
Qty
305375
305376
10
10
305377
10
1/4” – 28 SAE-LT Taper Thread
5/16”
3/8”
3/8”
3/8”
305319*
305320*
305321*
305322*
10
5
5
5
305268
305269
305270
305271
20
20
20
20
7/16”
7/16”
7/16”
305323*
305324*
305325*
5
5
4
305272
305273
305274
20
20
20
0.60”
0.60”
0.60”
305326*
305327
305328
2
2
2
305275
305276
305277
20
20
20
5/16”
7/16”
7/16”
305329*
305330*
305331*
10
6
6
305278
305279
305280
20
20
20
7mm
9mm
11mm
305332
305333
305334
8
5
3
305281
305282
305283
20
20
20
7/16”
7/16”
7/16”
7/16”
7/16”
305335*
305336
305337
305338*
305339*
7
5
5
4
4
305284
305285
305286
305287
305288
20
20
20
20
20
305370
305371
305372
305373
305374
10
10
10
10
10
7mm
9mm
9mm
305340*
305341*
305342*
10
5
5
305289
305290
305291
20
20
20
305361
305362
305363
10
10
10
9mm
9mm
9mm
305343*
305344
305345*
8
5
5
305292
305293
305294
20
20
20
305364
305365
305366
10
10
10
11mm
11mm
11mm
305346*
305347*
305348*
6
5
5
305295
305296
305297
20
20
20
305367
305368
305369
10
10
10
Dia 5/16”
Dia 3/8”
Dia 11/32”
305349*
305350
305351*
10
8
10
305298
305299
305313
20
20
20
305352*
305353
3
3
305314
305315
20
20
305354
305355
305356
3
1
2
305316
305317
305318
20
20
20
Short Straight
Short– 45°
Short– 65°
Short– 90°
R 1/8” x 19 BSPT Taper Thread
Straight
45°
90°
R 1/4” x 19 BSPT Taper Thread
Straight
45°
90°
UNF Parallel Thread
Straight
Straight
Straight
1/4” -28
5/6” – 24
3/8” - 24
BSF Parallel Thread
Straight
Straight
Straight
1/4” – 26
5/16” – 22
3/8” – 20
1/8” – 27 Pipe Threads PTF – Special Short
Short Straight
Short – 30°
Short – 45°
Short – 65°
Short – 90°
6.0mm x 1.0mm Taper Thread
Short Straight
Short – 45°
Short 90°
Short Straight
Short– 45°
Short– 90°
Short Straight
Short – 45°
Short – 90°
Drive Fittings
For
For
For
3/16” Drill
5/16” Drill
1/4” Drill
Button Head Grease Fittings Parallel Thread
1/4” x 19 BSP
1/8” x 28 BSP
0.6”
0.6”
Button Head Grease Fittings Taper Thread
1/8”-27 PTF SAE spl Short
3/8”-18 NPTF
1/4”-18 NPTF
708
5/8”
3/4”
5/8”
BSC
Motion Technology
Lubrication
TOOLS
TOLEDO GREASE NIPPLES
Part No. 305212
Assorted SAE Grease Nipples
• Handy pack of1/4”SAE steel nipples.
Qty
4 pcs
Description
Straight Nipples
Part No. 305213
Assorted Metric Grease Nipples
• Handy pack of 6mm steel nipples.
Quantity
Description
4 pcs
Straight Nipples
2 pcs
45 Angle Nippies
2 pcs
45o Angle Nippies
2 pcs
90o Angle Nippies
2 pcs
90o Angle Nippies
o
Part No. 305266
Assorted SAE Grease Nipple Set
• Made from EN-1A steel
(plated yellow zinc), heat treated
• Manufactured to QS9000 Quality
Standards
Qty
Description
Part No. 305267
Assorted Metric Grease Nipple Set
• Made from EN-1A steel
(plated yellow zinc), heat treated
• Manufactured to QS9000 Quality
Standards
Qty
Description
30 pcs
1/8” 27 NPT Straight
30 pcs
6mm x 1 Straight
15 pcs
1/8” 27 NPT 45° Angle
20 pcs
6mm x 90° Angle
15 pcs
1/8” 27 NPT 90° Angle
20 pcs
8mm x 1 Straight
20 pcs
1/4” 28 SAE LT Straight
20 pcs
8mm x 90° Angle
15 pcs
1/4” 28 SAE LT 45° Angle
20 pcs
10mm x 1 Straight
15 pcs
1/4” 28 SAE LT 90° Angle
10 pcs
10mm x 90° Angle
Part No. 305378
Stainless Steel Metric Grease Nipple Set
• Made from 303 Stainless steel with stainless steel ball.
• Manufactured to QS9000 Quality Standards
Qty
Description
30 pcs
6mm x 1 Straight
15 pcs
6mm x 45° Angle
15 pcs
6mm x 90° Angle
20 pcs
8mm x 1 Straight
15 pcs
8mm x 45° Angle
15 pcs
8mm x 90° Angle
BSC
Motion Technology
709
Cable Ties
TOOLS
CABLE TIE RETAIL PACKS
• Nylon cable ties are manufactured from virgin nylon 6/6 and
are UL94V-2 flammable rated.
• Black cable ties have been U.V. stabilised to resist material breakdown
and increase service life.
NATURAL CABLE TIES
Width
Length
mm
mm
Retail Packs
Part No.
Bulk Quantities
Qty
Part No.
Qty
CTB603NT
500
3
60
CT603NTCD
100
3
100
CT103NTCD
100
3
100
CTB103NT
500
CTW103NT
1000
4
150
CT154NTCD
100
CTB154NT
500
4
200
CT204NTCD
100
CTB204NT
500
4
250
CT254NTCD
100
4
300
CT304NTCD
100
5
200
CT205NTCD
100
CTB205NT
500
5
250
CT255NTCD
100
CTB255NT
500
5
300
CT305NTCD
100
CTB305NT
500
5
400
CT405NTCD
25
CTB1009NT
250
5
450
CT455NTCD
25
8
200
CT208NTCD
25
8
250
CT258NTCD
25
8
300
CT308NTCD
25
8
350
CT358NTCD
25
8
400
CT408NTCD
25
9
550
CT559NTCD
25
25
9
750
CT759NTCD
9
1000
CT1009NTCD
25
12
650
CT6512NTCD
25
BLACK CABLE TIES (U.V STABILISED)
Width
mm
710
BSC
Motion Technology
Length
mm
Retail Packs
Qty
Part No.
Qty
CT603BKCD
100
CTB603BK
500
100
CT103BKCD
100
CTB103BK
500
150
CT154BKCD
100
CTB154BK
500
4
200
CT204BKCD
100
CTB204BK
500
4
250
CT254BKCD
100
4
300
CT304BKCD
100
5
200
CT205BKCD
100
CTB205BK
500
5
250
CT255BKCD
100
CTB255BK
500
5
300
CT305BKCD
100
CTB305BK
500
5
400
CT405BKCD
25
CTB405BK
500
5
400
CT405BKCD-100
100
5
450
CT455BKCD
25
CTB455BK
500
5
450
CT455BKCD-100
100
8
200
CT208BKCD
25
8
250
CT258BKCD
25
8
300
CT308BKCD
25
8
350
CT358BKCD
25
8
400
CT408BKCD
25
CTB408BK
500
8
400
CT408BKCD-100
100
9
550
CT559BKCD
25
9
750
CT759BKCD
25
9
1000
CT1009BKCD
25
12
650
CT6512BKCD
25
3
60
3
4
Part No.
Bulk Quantities
Cable Ties
TOOLS
CABLE TIE PACKS
Part No: CTP03
Part No: CTP07
Part No: CTP08
Width
Total
Length Qty Pack
Qty
Width
Total
Length Qty Pack
Qty
Width
3mm
100mm
3mm
100mm
300
3mm
100mm
300
3mm
150mm
200
3mm
200mm
200
100
1000
Part No: CTP21
Part No: CTP23
Width
3mm
500
Total
Length Qty Pack
Qty
500
Part No: CTP24
Part No: CTP22
Total
Length Qty Pack
Qty
Width
Total
Length Qty Pack
Qty
Width
Total
Length Qty Pack
Qty
200mm
3mm
100mm
3mm
200mm
200
200
300
300
200
200
Width
3mm
Total
Length Qty Pack
Qty
100mm
300
300
CABLE TIE COMBO PACK
• Contains popular sizes of black (U.V. Stabilised)
cable ties in one handy carry pack
• 1000 cable ties in total
Part No: CTCP10
Width
Length
Part No
Total Pack Qty
3mm
100mm
CT103BKCD
4mm
150mm
CT154BKCD
2 x Packs of 100
2 x Packs of 100
5mm
200mm
CT205BKCD
4 x Packs of 100
5mm
300mm
CT305BKCD
2 x Packs of 100
BSC
Motion Technology
711
Pliers
TOOLS
KNIPEX
KNIPEX Combination Pliers
• with gripping zones for flat and round material, suitable for
versatile use
• with cutting edges for soft and hard wire
• long cutting edges for thicker cables
• cutting edges additionally induction hardened, cutting edge
hardness approx. 60 HRC
• special tool steel, oil-hardened and tempered
Cutting Capacities
Part No
Length
Head
Handles
9.0ømm
2
03 01 140
140mm
polished
plastic coated
2.8 ømm 1.8 ømm
10.0mm
03 01 160
160mm
polished
plastic coated
3.1 ømm 2.0 ømm 10.0ømm 2 16.0mm
03 01 180
180mm
polished
plastic coated
3.4 ømm 2.2 ømm 12.0ømm 2 16.0mm
03 01 200
200mm
polished
plastic coated
3.8 ømm 2.5 ømm 13.0ømm 2 16.0mm
03 01 250
250mm
polished
plastic coated
3.8 ømm 2.5 ømm 15.0ømm 2 25.0mm
KNIPEX Snipe Nose Side Cutting Pliers,
Cutting edges for wire
and cable
Gripping zone for flat
material
Gripping zone for
round material
Stork Beak Pliers
•
•
•
•
Part No
Length
Style
Head
Handles
26 11 200
200mm
Straight Tips
polished
plastic coated
high loadable, elastic precision points
half-round, long jaws
serrated gripping surfaces
with cutting edges for medium hard wire max. dia. 3.2 mm
and hard wire max. dia. 2.2 mm
• Vanadium steel, oil-hardened and tempered
REQUIRES
KNIPEX ‘Cobolt’, Compact Bolt Cutters (Lever Action Centre Cutters)
• with precision blades for soft, hard and piano wire
• cuts material like bolts, nails, rivets, etc. up to 5.2mm dia.
• exceptional cutting performance with minimum effort
because of new lever action design
• Forged, Chrome Vanadium electric steel, oil-hardened
and tempered
Cutting Capacities
Part No
71 01 200
Length
200mm
Head
Handles
polished
plastic coated
6.0 ømm
5.2 ømm
4.0 ømm
61%
LESS EFFORT
3.6 ømm
REQUIRES
KNIPEX High Leverage Diagonal Cutters
21%
LESS EFFORT
•
•
•
•
Cutting Capacities
Part No
Length
Head
Handles
74 01 140
140mm
polished
plastic coated
3.1 ømm
2.0 ømm
1.5ømm
74 01 160
160mm
polished
plastic coated
3.4 ømm
2.5 ømm
2.0ømm
74 01 180
180mm
polished
plastic coated
3.8 ømm
2.7 ømm
2.2ømm
74 01 200
200mm
polished
plastic coated
4.2 ømm
3.0 ømm
2.5ømm
74 01 250
250mm
polished
plastic coated
4.6 ømm
3.5 ømm
3.0ømm
712
BSC
Motion Technology
with forged-on axle for heaviest duty
suitable for all types of wire including piano wire
high cutting performance with minimum effort.
precision cutting edes additionally induction hardened,
cutting edge hardness approx. 64 HRC
• Chrome Vanadium electric steel, oil-hardened and tempered
Pliers
TOOLS
KNIPEX
KNIPEX ‘Cobra’, the HiTech Water Pump Plier
• fast and comfortable handling directly on the workpiece
• One adjustment: ensures optimum adjustment to differently
sized workpieces and user-friendly handle position;
• box-joint design: high stability because of double guide
• self-locking on pipes and nuts: no slipping on the workpiece
and low handforce required
• gripping surfaces with special hardened teeth, teeth hardness
approx. 61 HRC: low wear and secure gripping
• one-hand adjustment guard, prevents operators’ fingers
being pinched
• Chrome Vanadium electric steel, oil-hardened and tempered
87 01 150
87 01 250
87 01 400
Capacities
For pipes For nuts
Part No
Length
Head
Handles
87 01 150
150mm
polished
plastic coated
1 1/4”
30mm
87 01 180
180mm
polished
plastic coated
1 1/4”
30mm
87 01 250
250mm
polished
plastic coated
1 1/2”
36mm
87 01 300
300mm
polished
plastic coated
2
46mm
87 01 400
400mm
polished
plastic coated
3 1/2”
95mm
87 01 560
560mm
polished
plastic coated
4 1/2”
120mm
Fast and firm adjustment directly
on the workpiece
87 01 150: Is small enough to fit into a
shirt breast pocket.
KNIPEX Internal Circlip Pliers (bore holes)
Part No
Length
44 11 JO
Style
Head
Handles
Size of bore
140mm
polished
plastic coated
8-13 ømm
44 11 J1
140mm
polished
plastic coated
12-25 ømm
44 11 J2
180mm
polished
plastic coated
19-60 ømm
44 11 J3
225mm
polished
plastic coated
40-100 ømm
44 11 J4
320mm
polished
plastic coated
85-140 ømm
Part No
Length
Head
Handles
Size of bore
44 21 JO1
130mm
polished
plastic coated
8-13 ømm
44 21 J11
130mm
polished
plastic coated
12-25 ømm
44 21 J21
170mm
polished
plastic coated
19-60 ømm
44 21 J31
215mm
polished
plastic coated
40-100 ømm
44 21 J41
300mm
polished
plastic coated
85-140 ømm
Straight
Style
90o Bend
•
•
•
•
for fitting internal circlips in bore holes from 8 - 400 mm dia.
solid style, forged
non-slip, solid tips
Chrome Vanadium electric steel, oil-hardened and tempered
BSC
Motion Technology
713
Pliers
TOOLS
KNIPEX
KNIPEX External Circlip Pliers (shafts)
Part No
Length
46 11 AO
Style
Head
Handles
Size of shaft
140mm
polished
plastic coated
3-10 ømm
46 11 A1
140mm
polished
plastic coated
10-25 ømm
46 11 A2
180mm
polished
plastic coated
19-60 ømm
46 11 A3
210mm
polished
plastic coated
40-100 ømm
polished
plastic coated
85-140 ømm
Head
Handles
Size of bore
•
•
•
•
for fitting external circlips on shafts from 3 - 400 mm dia.
solid style, forged
non-slip, solid tips
Chrome Vanadium electric steel, oil-hardened and tempered
Straight
46 11 A4
320mm
Part No
Length
46 21 AO1
125mm
polished
plastic coated
3-10 ømm
46 21 A11
125mm
polished
plastic coated
10-25 ømm
46 21 A21
170mm
polished
plastic coated
19-60 ømm
46 21 A31
200mm
polished
plastic coated
40-100 ømm
polished
plastic coated
85-140 ømm
Style
90 o Bend
46 21 A41
300mm
Special Retaining Ring Pliers
(shafts)
• for fitting horseshoe-shaped spring retaining rings and
circlips without grip holes
• for retaining rings with a minimum ring split gap of 3.6 mm
• for shaft retaining devices
• forged with opening spring
• Chrome Vanadium steel, oil-hardened and tempered
Part No
Length
45 10 170
170mm
714
Style
Head
burnished
Handles
burnished
BSC
Motion Technology
Pliers
TOOLS
KNIPEX
KNIPEX TOOL SETS
Part No: 00 19 56
KNIPEX Circlip Plier Set
• tool roll equipped with four popular Circlip Pliers for internal
and external circlips
• with practical, adjustable quick-release fastener
• transparent protective cap
Circlip Plier Set Part No: 00 19 56
Part No
Length
Style
Head
Handles
Bore/Shaft Size
44 11 J2
180mm
Straight
polished
plastic coated
19-60 ømm
polished
plastic coated
19-60 ømm
polished
plastic coated
19-60 ømm
polished
plastic coated
19-60 ømm
o
44 21 J21
170mm
90 Bend
46 11 A2
180mm
Straight
46 21 A21
170mm
90 o Bend
Part No: 00 19 57
CirclipPlier
KNIPEX Precision
CirclipSet
Plier Set
Part no: 0 19 56
• tool roll equipped with four popular Precision Circlip Pliers
for internal and external circlips
• Precision Circlip pliers have inserted tips of high density drawn spring wire.
• Ten times longer service life.
Precision Circlip Plier Set Part No: 00 19 57
KNIPEX Plier / Cutter Tool Set
Part No: 0035
Part No
Length
Style
Head
Handles
Bore/Shaft Size
48 11 J1
140mm
Straight
polished
plastic coated
12-25 ømm
48 11 J2
180mm
Straight
polished
plastic coated
19-60 ømm
49 11 A1
140mm
Straight
polished
plastic coated
10-25 ømm
49 11 A2
180mm
Straight
polished
plastic coated
19-60 ømm
Part No: 002011S
KNIPEX Assembly Pack
• Tool roll containing four popular plier/cutter tools.
• Premium quality and long service life.
• Handy tool pack containing popular pliers.
• Made in Germany.
Plier Tool Roll Part No: 0035
Assembly Pack Part No: 002011S
Part No
Description
Length
Head
87 01 250
Cobra Water Pump Pliers
250mm
polished
plastic coated
87 02 250
26 11 200
Snipe Nose Cutting Pliers
200mm
polished
plastic coated
02 02 200 High Leverage Combination Plier
03 01 200
Combination Pliers
74 01 200 High Leverage Diagonal Pliers
200mm
200mm
polished
polished
Handles
plastic coated
Part No
74 02 200
Description
Length
Cobra Water Pump Pliers
Diagonal Cutters
250mm
Head
Handles
polished
plastic coated
200mm
polished
plastic coated
200mm
polished
plastic coated
plastic coated
BSC
Motion Technology
715
Screwdrivers
TOOLS
WERA
WERA KRAFTFORM® PLUS SERIES 300 SCREWDRIVER SET
Part No: 05 105650 001 Slotted and Phillips Screws
• Six piece screwdriver set for slotted and Phillips screws.
• Each Kraftform® Plus 300 Series Screwdriver feature
the ergonomically designed Kraftform® handle.
• The Kraftform® handle shape is perfectly adapted to
the palm and sits firmly in the hand.
• Includes Lasertip® treated tip - prevents slipping
out of the screw head.
• Includes display carton and rack.
• German quality.
Type
Head Size
Shaft Length
Lasertip® Qty
3mm
80mm
1
4mm
100mm
1
5.5mm
125mm
1
6.5mm
150mm
1
PH1
80mm
1
PH2
100mm
1
WERA KRAFTFORM® CHISELDRIVER SCREWDRIVER SET
• Six piece chiseldriver screwdriver set for slotted
and Phillips screws.
Type
• For fastening, chiselling and loosening seized screws.
• With integrated impact cap and ‘pound-thru’ hexagonal blade.
• Each Kraftform® Plus 900 Series Chiseldriver feature
Head Size
Shaft Length
Qty
3.5mm
80mm
1
4.5mm
90mm
1
5.5mm
1200mm
1
7mm
125mm
1
PH1
80mm
1
PH2
100mm
1
• Includes display carton.
• German quality.
WERA KRAFTFORM® CLASSIC SCREWDRIVER SET
• Six piece economical screwdriver set for slotted
and Phillips screws.
Type
• Each Kraftform® Classic Screwdriver feature
• Features Wera Black Point Tip, which reduces wear
and extends the service life of screws and tools.
Head Size
Shaft Length
Qty
3mm
80mm
1
4mm
100mm
1
5.5mm
125mm
1
6.5mm
150mm
1
PH1
80mm
1
PH2
100mm
1
Head Size
Shaft Length
Qty
3mm
80mm
1
4mm
100mm
1
5.5mm
125mm
1
6.5mm
150mm
1
PZ1
80mm
1
PZ2
100mm
1
• German quality.
WERA KRAFTFORM® C
Part No: 05 031281 001 Slotted and Pozidriv Screws
• Six piece economical screwdriver set for slotted
and Pozidriv screws.
• Each Kraftform® Classic Screwdriver feature
• Features Wera Black Point Tip, which reduces wear
and extends the service life of screws and tools.
• German quality.
716
BSC
Motion Technology
Type
FOR
TOUGH
JO BS!
Socket and Spanner Sets
z
z
z
z
z
z
zz
z
z
z
z
z
z
zz
zz
z
zz
z
z
z
z
z
z
Unique Patented Design
Metrinch’s patented wall drive allows the wrench to grip a much larger
wall surface of the bolt or nut. The 4-point grip design enables Metrinch
sockets and spanners to ?t multiple sizes and damaged or rounded nuts.
Traditional sockets and spanners only have a 2-point grip and depend on a
precise fit at the bolt or nut’s corners.
z zzzz z
zz
zz z
zz
zz
zz
z
zz
Get More Use Out of Fewer Tools
Metrinch means fewer tools and easier selection as each tool can be used
for both metric and inch, plus damaged nuts and bolts. This eliminates
switching back and forth from imperial to metric, one tool set is all you
need. Fewer tools also means less cost and a lighter toolbox.
z
zz
z
z
z
Metrinch means fewer tools
z
z
z
z
z
TOOLS
z
z
z
z
z
z
zz
zz
zz
zz
z zzz zz zzzz
Non Slip Hold
No slipping means greater safety. No more cut hands, banged up
knuckles and elbows due to wrench slippage.
Lifetime Guarantee
All Metrinch tools are forged from high grade chrome vanadium steel for
lifetime use. This provides improved safety, particularly in conditions
involving extreme stress. Metrinch tools are chrome plated or polished
to provide the most effective protection against rust.
Spare Parts
Spare parts are available for Metrinch kits so tools are easily replaced if lost.
Patented Wall Drive Profile
Unique 6 Wall Drive System
Certi?ed Professional Quality
All Metrinch tools meet DIN, BS and US Federal standards for torque and
hardness. Metrinch tools come complete with a lifetime guarantee.
More Torque, Less Wear
By exerting pressure through the walls, Metrinch grips more securely than
conventional sockets. Since torque pressure is spread more evenly through
the wall, there is less distortion in both the tool and the fastener.
The Metrinch 6 wall drive system means that one tool
set is all you need to service your equipment, whether
it’s made in Germany, the USA or Australia.
The patented Metrinch wall drive profile works
from the flats on a nut or bolt, not the corners.
METRINCH IMPACT SOCKET SETS
Part No. MET-2400
15 Piece Standard Impact Socket Set 1/2” Drive
Part No. MET-2450
15 Piece Deep Wall Impact Socket Set 1/2” Drive
15=42
15=42
This 15 piece set equals a 42 piece conventional set
Fits
Metric
mm
11
12
13
14
15
16
17
18
Cont.
SAE/AF
Inch
7/
16
15/
32
1/
2
9/
16
19/
32
5/
8
11/
16
23/
32
1/2” Drive
Socket
Fits
Metric
mm
Fits
Cont.
SAE/AF
Inch
1/2” Drive
Socket
Metric
mm
19
3/
20
25/
32
12
21
13
24
13/
16
7/
8
29/
32
15/
16
16
25
1
17
22
23
4
11
14
15
18
Cont.
SAE/AF
Inch
7/
16
15/
32
1/
2
9/
16
19/
32
5/
8
11/
16
23/
32
Fits
1/2” Drive
Deep
Socket
Metric
mm
Cont.
SAE/AF
Inch
19
3/
20
25/
4
24
32
13/
16
7/
8
29/
32
15/
16
25
1
21
22
23
BSC
Motion Technology
1/2” Drive
Deep
Socket
717
TOOLS
METRINCH SPANNER SETS
Part No: MET-0110
Part No. MET-0110
10 Piece Spanner Set
10=28
Contents
Metric
mm
SAE/AF
Inch
Part No: MET-0125
Part No. MET-0125
14 Piece Spanner Set
14=45
Contents
Metric
mm
SAE/AF
Inch
8
8
5/
16
9
11/
32
10
3/
2
11
7/
10
3/
11
7/
12
15/
13
1/
16
32
8
16
12
15/
32
32
13
1/
2
8
14
9/
16
15
19/
32
8
14
9/
15
19/
16
5/
16
16
17
11/
18
23/
32
16
5/
19
3/
4
17
11/
18
23/
32
19
3/
4
20
25/
32
21
13/
16
16
22
7/
8
23
29/
32
METRINCH SOCKET SETS
Part No. MET-0420
17 Piece Standard Socket Set 1/2” Drive
Part No. MET-0210
24 Piece Standard Socket Set 1/4” Drive
17=58
24=50
Fits
Metric
mm
10
11
12
13
14
15
16
17
18
19
718
Cont.
SAE/AF
Inch
3/
8
7/
16
15/
32
1/
2
9/
16
19/
32
5/
8
11/
16
23/
32
3/
4
1/2”
Drive
Socket
Fits
Metric
mm
20
21
Cont.
SAE/AF
Inch
25/
24
32
13/
16
7/
8
15/
16
25
1
26
27
11/16
13/ 32
29
30
15/ 32
13/16
31
32
17/ 32
11/4
22
BSC
Motion Technology
1/2”
Drive
Socket
Fits
Contents
Metric SAE/AF 1/4” Drive 1/4” Drive
mm
Inch
Socket Deep Socket
4
5
6
7
8
9
10
11
12
13
5/
32
3/
16
1/
4
9/
32
5/
16
11/
32
3/
8
7/
16
15/
32
1/
2
Accessories:
•Quick Release Reversible
Ratchet
• 150mm (6”) Extension Bar
• Fingertip Ratchet
• Universal Joint
TOOLS
METRINCH SOCKET AND SPANNER SETS
Part No. MET-0450
30 Piece Socket and Spanner Set 1/2” Drive
30=88
Accessories
:
• 125mm (5”) Extension Wobble Bar
• Disc Type Quick Release Ratchet
Handle
Fits
• 21mm & 13/16” Spark Plug Socket
• Flexible Handle
• Universal Joint
Contents
Fits
1/2”
Metric SAE/AF
Drive Spanner
mm
Inch
Socket
3/
8
7/
16
15/
32
1/
2
9/
16
19/
32
5/
8
11/
16
23/
32
3/
4
10
11
12
13
14
15
16
17
18
19
Part No. MET-0650
50 Piece Socket and Spanner Set
1/4”, 3/8” & 1/2” Drive
50=124
24
32
13/
16
7/
8
29/
32
15/
16
25
1
26
27
11/16
13/32
28
11/8
29
30
15/32
13/16
31
32
17/32
11/4
2” Drive Accessories:
•75mm (3”) Wobble Extension Bar
• Sliding T-Piece
• Flexible Handle Ratchet
•Quick Release Ratchet – 32 Teeth
Fits
5
6
7
8
9
10
11
12
13
14
16
17
19
20
21
22
24
26
27
29
30
• Square Driver - Plastic Handle
22
23
25/
• Quick Release Ratchet – 25 Teeth
• Universal Joint
• 38mm & 1/2” Wobble Ex. Bar
Metric
mm
• 3/8” F & 1/4” M Adaptor
20
21
3/8” Drive Accessories:
1/
1/4” Drive Accessories:
Contents
1/2”
Metric SAE/AF
Drive Spanner
mm
Inch
Socket
31
32
Contents
SAE/AF
Inch
1/4”
Drive
Socket
3/8”
Drive
Socket
1/2”
Drive
Socket
3/8” Drive
Deep
Socket
Spanner
3/
16
1/
4
9/
32
5/
16
11/
32
3/
8
7/
16
15/
32
1/
2
9/
16
5/
8
11/
16
3/
4
25/
32
13/
16
7/
8
15/
16
11/16
13/ 32
15/ 32
13/16
17/ 32
11/4
BSC
Motion Technology
719
TOOLS
720
BSC
Motion Technology

About BSC.P65

Transcription

Similar documents

Brochure SFBM.indd - Werkhuizen Hengelhoef Industrial Contracting

012602 Art. VESPINO

kik-step®

kik-step®

kik-step®

Taco : Where Toys and Sports Are King, 1970

NARSTCO Steel Ties Give Short Lines Longer Life.

See Complete Auction Booklet

Haul Master - Prairie Sky Equipment Ltd.

ZIMA 126-CS-Fabrication.indd