Specifications - Gaggenau Resources

Vario 400 series electric deep fryer
VF 414
VF 414 610
Stainless steel
Width 15" (38 cm)
Included accessories
1 deep frying basket
1 stainless steel cover with hook for
frying basket
Installation accessories
In combination of several Vario
cooktops or VL 414 downdraft,
connecting strips must be used.
Choose respective VA 420 strip from
one of the below, depending on type
of installation.
VA 420 010
Connection strip for surface-mount
installation without appliance cover.
VA 420 011
Connection strip for surface-mount
installation with appliance cover.
VA 420 000
Connection strip for flush installation
without appliance cover.
VA 420 001
Connection strip for flush installation
with appliance cover.
VA 440 010
Stainless steel cover with mounting
strip
VA 450 400
Stainless steel adjustment strip, width
15". Necessary accessory in a combination of 15" Varios with at least one
appliance cover to compensate for the
appliance depth.
Optional accessories
Part# 743976
Additional deep frying basket.
–– T
hree-zone frying basin, without
flavor transfer
–– Exact temperature setting, no drop
in output
–– Integrated frying basket
suspension
–– Solid stainless steel control knobs
–– Precision-crafted ⅛-inch stainless
steel frame
–– For surface-mount installation with
a visible edge or for flush
installation
–– Can be perfectly combined with
other Vario 400 series products
Cooking zones
Three-zone basin.
Oil quantity: 3.7 quarts (3.5 liters).
Operation
Two control knobs with illuminated
ring, temperature marking and oil/fat
selection.
Electronic temperature control
between 275°F and 380°F, in
5°F increments.
Features
Cleaning stage.
Gentle fat melting stage.
Frying zone.
Expansion zone.
Cold oil zone.
Swivel-out heating element (3,000 W).
Safety
Oil drain valve with child lock.
Safety shut-off.
Planning notes
Depending on the type of installation — surface-/ or flush-mounted, with or
without cover — the specific location of
the control knob positions may vary.
When using the appliance cover
VA 440 or adjustment strip VA 450
additional space for cut-out depth
needs to be considered.
In a combination of Vario cooktops
with at least one appliance cover, the
adjustment strip VA 450 is required.
In a combination of several Vario 400
series cooktops a connection strip
must be used.
Depending on the type of installation — surface-/ or flush-mounted, with or
without cover — the respective VA 420
connecting strip must be used.
For flush installation the edge height
in the cut-out needs to be at least ½"
and for surface-mount ⅜". Ensure a
continuous cut surface of 90°.
The weight capacity and stability,
especially in case of thin counter­tops,
must be supported using suitable
substructures. Take the appliance
weight and additional loads into
account.
Flush installation is possible in
countertops made of stone, synthetics
or solid wood. Heat resistance and
watertight sealing of the edges must
be observed. For other materials,
please consult with your countertop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the countertop cut-out.
If installing several Vario products in
individual cut-outs allow for a minimum
distance of 2" between the cooktops.
Plan a door in the base cabinet for
operation of the oil drain-valve.
Built-in control panel can be inte­grated
in the bottom cabinet at drawer level.
Front panel thickness ⅝" – 1".
The adjacent drawing “Installation of
the control knobs” must be observed
if the panel is more than 1" thick (there
must be a recess at the rear for proper
control module installation).
VF 414 and VK 414 must not be
installed directly next to each other.
A minimum clearance of at least
1 ⁹⁄₁₆" from the appliance edge to the
wall or to adjacent cabinets must be
observed.
Appliance can be snapped into the
countertop from above.
Plan a door in the base cabinet for
operation of the oil drain-valve.
Please read additional planning notes
on pages 82 – 87.
Rating
Total rating: 3.0 kW.
Total Amps: 13 A.
208/220–240 V / 60 Hz
Plan for a 70" connecting cable
without plug (hardwire required).
Surface-mount Installation
1415/ 16"
(380)
Flush-mount Installation
1415/ 16"
(380)
1
20 / 2" (520)
*211/ 16" (*535)
1
/ 8" (3)
105/ 8" (270)
201/ 2" (520)
*211/ 16" (*535)
103/ 4" (273)
2011/ 16"+1/ 16" (526+2)
*211/ 4"+1/ 16" (*541+2)
1
/ 8"
(3)
R 3/ 16" 1
(5+1) / 8"-0.5
(3.5 )
R 1/ 8" (R 3)
90°
min. 13/ 8" (35)
193/ 8"±1/ 16" (492±2)
*201/ 4"+1/ 16" (*515+2)
min. 2"
(50)
70" (1.8 m)
min. 13/ 8" (35)
min. 2"
(50)
min. 41/ 8" (105)
max. 63/ 8" (162)
39/ 16" (90)
213/ 16"
(72)
11"
(280)
Control knob installation, surface-mounted installation
* with
appliance
or adjustment
strip.
* With
appliance
covercover
or adjustment
strip. See
separate planning notes on page 87.
See separate planning notes.
Installation of the control knob; surface-mount installation
41/ 8"-63/ 8"
(105-162)
min. 3/ 16" (5)
ø 13/ 8" (35)
min. 41/ 4" (109)
max. 61/ 2" (166)
3" (76)
143/ 16"±1/ 16"
(360±2)
3
min. / 16" (5)
31/ 8"x123/ 16"
(80x310)
153/ 16"+1/ 16"
(386+2)
Control knob installation, flush-mounted installation
* with appliance cover or adjustment strip.
* With
appliance
cover
or adjustment
See
separate
planning
notes. strip. See separate planning notes on page 87.
Installation of the control knob; flush-mount installation
41/ 8"-63/ 8"
(105-162)
41/ 4"-61/ 2"
(109-166)
min. / 16" (5)
min. 3/ 16" (5)
ø 13/ 8" (35)
41/ 4"-61/ 2"
(109-166)
3
31/ 8"x123/ 16"
(80x310)
ø 13/ 8" (35)
ø 13/ 8" (35)
D =1" (26)
5
/ 8"-1"
(16-26)
R 1/ 8" (3)
70" (1.8 m)
dia. 13/ 8" (35) 815/ 16"
(227)
dia. 21/ 8"
213/ 16"
(60)
(72)
39/ 16"
3" (76)
(90)
11"
143/ 16"±1/ 16"
(280)
(360±2)
3
dia. 1 / 8" (35) 815/ 16"
dia. 21/ 8"
(227)
(60)
90°
193/ 8"±1/ 16" (492±2)
*201/ 4"+1/ 16" (*515+2)
D =1" (26)
5
/ 8"-1"
(16-26)
D >1" (26)
D >1" (26)
View from above
View from above
153/ 16"+1/ 16"
(386+2)
3
14 / 16"±1/ 16"
(360±2)
2011/ 16"+1/ 16"
(526+2)
*211/ 4"+1/ 16" 3 ±1
(*541+2) 19 / 8" ±2/ 16"
(492 )
*201/ 4"+1/ 16"
(*515+2)
R 1/ 8"
(R 3)
R 3/ 16"
(R 5+1)
* with appliance cover or adjustment
strip (observe front and rear
asymmetrical assembly. See
separate notes “assembly with
appliance cover/adjustment strip”
on page 87).
* with appliance cover or adjustment bar
Longitudinal
(observesection
front and rear asymmetrical assembly,
Longitudinal section
see separate notes
"assembly with
1415/ 16"
cover/adjustment bar"). 1/ 8"
(380)
(3 )
(3+1)
1
appliance
/ 8"
+1
fill with
silicone
1
/ 8" (3,5-0,5)
1
/ 2"
(13)
1
/ 2"
(13)
143/ 16"±1/ 16"
(360±2)
153/ 16"+1/ 16"
(386+2)
Cross-section
Cross-section
1
/ 8"
(3+1)
201/ 2"
(520)
1
/ 8"
(3+1)
fill with
silicone
1
/ 8" (3.5-0.5)
11
/ 16"
(17)
11
/ 16"
193/ 8"±1/ 16" (17)
±2
(492 )
2011/ 16"+1/ 16"
(526+2)
Numbers indicated
inside parenthesis ( ) = mm
When installing with appliance cover or adjustment strip, pay attention to
the deeper cut-out and the front and rear groove width.