pocket guide - API of NH/Delta T

Transcription

Rheem Residential
pocket guide
G A S , E L E C T R I C & S O L A R TA N K T Y P E
❘
TA N K L E S S
❘
ON-LINE PRODUCT GUIDE: RHEEM.COM
Rheem National Customer Service
334-260-1500
CUSTOMER SERVICE, WARRANTY, PARTS ___ 1-800-621-5622
FAX __________________________________ 1-800-535-9538
TECHNICAL SERVICE (1-800-432-8373) _____ 1-800-HEATER3
WEBSITE ______________________________
rheem.com
DIVISION OFFICE _______________________
Rheem Water Heating
101 Bell Road
Montgomery Alabama 36117-4305
In keeping with its policy of continuous progress
and product improvement, Rheem reserves the
right to make changes without notice.
Printed in U.S.A.
Form No. 105-61 Rev. 18
05/06 WP
Table of Contents
GAS
• Tankless 7.4...............................2-3
• Tankless 4.2...............................4-5
• Professional GUARDIAN SYSTEM ...........6-7
• Professional Heavy Duty ...........8-9
• Fury GUARDIAN SYSTEM ...................10-11
• Fury Heavy Duty....................12-13
• PowerVent GUARDIAN SYSTEM .........14-15
• PowerVent HIGH EFFICIENCY ...........16-17
• Fury Direct Vent .....................18-19
• Warrior MANUFACTURED HOUSING ...........20-21
• Warrior DV MANUFACTURED HOUSING .....22-23
• Warrior DVX MANUFACTURED HOUSING ..24-25
ELECTRIC
• Professional ...........................26-27
• Marathon................................28-29
• Fury........................................30-31
• Warrior MANUFACTURED HOUSING ...........32-33
• Marathon Point-of-Use...........34-35
• Point-of-Use ...........................36-37
• Table Top................................38-38
SOLAR
• Solaraide................................40-41
• Solaraide HE..........................42-43
MISCELLANEOUS
• ProtectionPlus .............................44
• Lifeguard Electric Element..........45
• EverKleen....................................46
• Accessories.................................47
• Therm-X-Guard...........................48
RHEEM NATIONAL
CUSTOMER SERVICE
SEE BACK COVER
1
High Volume Tankless Gas Water Heater – 7.4 Gallons Per Minute
Indoor and Outdoor Models Available
10-Year Limited Warranty on Heat Exchanger*
3-Year Limited Warranty on Parts*
• Continuous hot water – 7.4 gallons per
minute at a 45° F rise
• Energy saving design
• Compact, space saving design
• Intelligent electronic controls designed to
increase energy efficiency and safety
• Self diagnostic program
• Digital display shows temperature setting and
maintenance codes on remote control
• Exclusive oxygen depletion sensor
• Exclusive film wrap overheat limiter
• Built-in electric blower
• Indoor units use 4" Category III stainless
steel vents and vent horizontally or vertically
• Maximum horizontal or vertical vent run is 47
Qualifies for
up to a $300
Energy Tax Credit!
feet 6 inches including one 90 degree elbow
DESCRIPTION
FEATURES
1121 requirements (pending certification)
* See Residential Warranty Information Brochure for
complete warranty information.
Energy Factor and Average Annual
Operating Costs based on D.O.E.
(Department of Energy) test
procedures. D.O.E. national
average fuel rate natural gas
91¢/therm; LP $1.23/gallon.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
MODEL NUMBER
GAS
INPUT
BTU/HR.
RTG-74PVN
(NAT. GAS)
19,000 199,900
Indoor
100° to
140° F
4.2
7.4
3/4
RTG-74PVP
(LP GAS)
19,000 199,900
Indoor
100° to
140° F
4.2
7.4
RTG-74XN
(NAT. GAS)
19,000 199,900 Outdoor
100° to
140° F
4.2
RTG-74XP
(LP GAS)
19,000 199,900 Outdoor
100° to
140° F
4.2
TYPE
• Indoor models supplied with a 120 volt
power cord
• Supplied remote control (USC1-117) allows
temp. settings up to 120˚ F
• Optional remote control (UMC-117) allows
temp. settings up to 140˚ F
• Indoor and outdoor models feature freeze
protection to -30° F
• Low NOx emissions meet SCAQMD rule
WATER FLOW RATE
TEMP. GPM @ 77° GPM @ 45°
RANGE* RISE MAX. RISE MAX.
®
ENERGY INFO.
HEIGHT
WIDTH
DEPTH
VENT
SHIP.
WEIGHT
(LBS.)
3/4
25-3/8
14-7/8
11-1/8
4
55
.82
$167
3/4
3/4
25-3/8
14-7/8
11-1/8
4
55
.82
$246
7.4
3/4
3/4
25-3/8
14-7/8
11-1/8
N/A
55
.82
$167
7.4
3/4
3/4
25-3/8
14-7/8
11-1/8
N/A
55
.82
$246
CONNECTION
WATER
GAS
Factory set maximum temperature is 120° F with supplied USC1-117 remote control.
For temperatures up to 140˚ F, remote control (UMC-117) is required – sold separately.
• For installations above 3,280 feet a high altitude chip is required. Refer to Rheem price
list or consult factory for details.
• Consult factory for information on sizing the application
*
Maximum Hot Water Flow Rate and Temperature Rise
Temp. Rise (°F)
45
50
60
70
80
90
100
Water Flow (GPM)
7.4
6.7
5.6
4.8
4.2
3.7
3.3
ENERGY
FACTOR
EST. ANN.
OPERATING
COST
Indoor models vent horizontally or vertically
This water heater has a built-in electric blower to force exhaust
gas to the outside. Category III stainless steel vent
(UL1738 certified) is required in
order to avoid damage from
possible condensation.
Side-wall
Type “B” vents are not
Side-wall
permitted.
Minimum flow rate required to initiate heating cycle .66 gpm.
3
Tankless Gas Water Heater – 4.2 Gallons Per Minute
Indoor Models
10-Year Limited Warranty on Heat Exchanger*
3-Year Limited Warranty on Parts*
• Continuous hot water – 4.2 gallons
Qualifies for
up to a $300
Energy Tax Credit!
DESCRIPTION
FEATURES
inches including one 90 degree
elbow
• Uses 3" Category III stainless steel
vent
• Supplied with a 120 volt power cord
• Low NOx emissions meet
SCAQMD rule 1121 requirements
* See Residential Warranty Information Brochure for
procedures. D.O.E. national
average fuel rate natural gas
91¢/therm; LP $1.23/gallon.
MODEL NUMBER
GAS
INPUT
BTU/HR.
RTG-42PVN
(NAT. GAS)
31,500 118,000
Indoor
100° to
140° F
2.4
4.2
3/4
RTG-42PVP
(LP GAS)
31,500 118,000
Indoor
100° to
140° F
2.4
4.2
3/4
TYPE
• Vents horizontally or vertically
• Maximum vent run is 36 feet 2
per minute at a 45° F rise
• Energy saving design
• Compact, space saving design
• Intelligent electronic controls
designed to increase energy
efficiency and safety
• Self diagnostic program
• Digital display shows temperature
setting and maintenance codes
• Exclusive oxygen depletion sensor
• Exclusive film wrap overheat limiter
• Built-in electric blower
WATER FLOW RATE
TEMP. GPM @ 77° GPM @ 45°
RANGE* RISE MAX. RISE MAX.
HEIGHT
WIDTH
DEPTH
VENT
1/2
22-1/4
13-3/4
5-1/8
3
35
.81
$168
1/2
22-1/4
13-3/4
5-1/8
3
35
.81
$250
ENERGY
FACTOR
EST. ANN.
OPERATING
COST
Venting
Maximum Hot Water Flow Rate and Temperature Rise
Temp. Rise (°F)
45
50
60
70
80
90
100
Water Flow (GPM)
4.2
3.8
3.2
2.7
2.4
2.1
1.9
Minimum flow rate required to initiate heating cycle .92 gpm.
ENERGY INFO.
SHIP.
WEIGHT
(LBS.)
CONNECTION
WATER
GAS
* Factory set maximum temperature is 120° F.
• For installations above 3,280 feet a high altitude chip is required.
Refer to Rheem price list or consult factory for details.
• Consult factory for information on sizing the application
®
This water heater has a built-in electric
blower to force the exhaust gas to the
outside. 3" Category III stainless steel vent
(UL1738 certified) is required in order to
avoid damage from possible condensation.
A RTG20000BM vent adapter or
equivalent approved vent adapter is
required for vent connection. Contact
distributor or factory for price and
availability.
5
Professional™ Now with the Guardian System
™
Available in 40 and 50 Gallon Tall – 40 Gallon Short Gas Models
8-Year* Limited Tank and Parts Warranty with a Professional Installation.
With ProtectionPlus™ the 8-Year Limited Tank Warranty Becomes 12 Years! SEE PAGE 44.
Get
4 MORE YEARS
with ProtectionPlus™
Guardian System™
• One-of-a-kind air/fuel shut-off device offers double
protection
• Maintenance free – no filter to clean
• Standard replacement parts
Environmentally Friendly Burner
• Low NOx design for low nitrous oxide emissions
Self-Cleaning
• EverKleen™ patented system fights sediment build-up
• Reduces fuel costs
• Provides more hot water
Easy to Light
• No matches required
Energy Efficient
• More hot water at low operating cost
DESCRIPTION
T
Y
P
E
T
A
L
L
SHORT
GAL.
CAP.
MODEL NUMBER
FEATURES
GAS INPUT IN
THOUS. BTU/HR.
NAT.
LP
RECOVERY IN
G.P.H. 90° RISE
NAT.
LP
High Altitude Compliant
• All models are certified for applications up to 6,000
feet above sea level. Some models are certified up to
10,200 feet above sea level. Check factory for listing
Longer Life
• Patented magnesium anode rod design incorporates
a special resistor that protects the tank from rust
Plus…
• Brass drain valve and temperature and pressure
relief valve are included
• Meets or exceeds National Appliance Energy
Conservation Act (NAECA) requirements
* See Residential Warranty Information Brochure
for complete warranty information.
®
Energy Factor and Average Annual Operating
Costs based on D.O.E. (Department of Energy)
test procedures. D.O.E. national average fuel rate
natural gas 91¢/therm; LP $1.23/gallon.
FIRST HOUR
DEL. G.P.H.
NAT.
HT. TO
VENT
TANK
HT.
DIAM.
HT. TO
GAS
CONN.
VENT
SIZE
WATER
CONN.
CNTR.
HT. TO
SIDE
T&P
ENERGY INFO.
WATER
CONN.
SHIP.
WT.
(LBS)
ENERGY
FACTOR
NAT.
AVG. ANN.
OPER. COST
NAT.
40
22V40 PROF
38
–
38.4
–
73
61-3/4
58-3/8
18-1/8
14-1/2
3
8
52-1/4
3/4
120
0.59
$231
38
42V40 PROF
40
34
40.4
34.3
68
61-1/2
57-3/4
19-3/4
14-1/2
3
8
52-1/4
3/4
125
0.60
$227
40
RHG PRO40-40F
40
34
40.4
34.3
68
63-1/4
59-3/4
21
14-1/2
3
8
53-1/2
3/4
135
0.62
$220
50
22V50 PROF
38
–
38.4
–
90
61-1/2
58-1/4
20-1/8
14-1/2
3
8
51-3/8
3/4
130
0.58
$235
50
42V50-40 PROF
40
36
40.4
36.4
83
61-1/2
58
21-3/4
14-1/2
3
8
52-1/2
3/4
150
0.58
$235
50
RHG PRO50-40F
40
36
40.4
36.4
83
62-1/4
58-3/4
23
14-1/2
3
8
52-1/2
3/4
165
0.62
$220
50
RHG PRO50-50F
50
–
50.5
–
83
62
58
21-3/4
14-1/2
4
8
52-1/2
3/4
150
0.58
$235
40
42V40SPROF
40
36
40.4
36.4
72
53-7/8
50-1/2
20-1/8
14-1/2
3
8
44
3/4
130
0.59
$231
50
42V50SPROF
40
36
40.4
36.4
84
54-1/4
49-3/4
22-1/4
14-1/2
3
8
44
3/4
158
0.59
$231
SPECIFY LP GAS WHEN ORDERING. Add “P” suffix to the model number. Example: RHG PRO40-40PF.
• For SCAQMD rule 1121 compliance models (California only), add “SQ” suffix to the model number. Example: 22V40 PROFSQ.
Rheem Guardian System Features…
Exclusive Combustion Shut-off System
Flame Arrestor Plate
Maintenance Free
Should a spill incident occur, the Guardian System shuts off
the gas supply and the air supply preventing a sustained
vapor burn in the combustion chamber.
A specially-designed flame arrestor
prevents ignition of vapors outside the
combustion chamber.
Superior air filtration prevents the
flame arrestor from becoming clogged
by lint, dust and oil.
7
Professional™ Heavy Duty Gas Water Heaters
Available in 60, 75 and 100 Gallon Tall Gas Models
Get
4 MORE YEARS
• Designed for high volume applications
• High BTU input for fast recovery
• Extra durable brass drain valve
• Heat saving flue baffle design
• Temperature and pressure relief valve
T
A
L
L
GAL.
CAP.
Energy Conservation Act (NAECA)
requirements
* See Residential Warranty Information Brochure for complete
warranty information.
included
• Extra durable high temperature dip tube to
meet the most stringent plumbing codes
DESCRIPTION
T
Y
P
E
• Meets or exceeds National Appliance
MODEL NUMBER
FEATURES
GAS INPUT IN
THOUS. BTU/HR.
NAT.
LP
RECOVERY IN
G.P.H. 90° RISE
NAT.
LP
®
test procedures. D.O.E. national average fuel
rate natural gas 91¢/therm; LP $1.23/gallon.
FIRST HOUR
DEL. G.P.H.
NAT.
LP
HT. TO
VENT
TANK
HT.
DIAM.
HT. TO
GAS
CONN.
VENT
SIZE
WATER
CONN.
CNTR.
ENERGY INFO.
HT. TO
SIDE
T&P
WATER
CONN.
SHIP.
WT.
(LBS)
ENERGY
FACTOR
NAT.
AVG. ANN.
OPER. COSTS
NAT.
60
RHG PRO60-50NT*
50
50
50.5
50.5
106
106
60
56
23
13-1/4
4
8
48-1/2
3/4
180
0.56
$244
75
RHG PRO75-70N*
70
69
70.7
69.7
109
109
64-1/2
60-1/2
26-1/4
14-3/4
4
11
54-1/2
1
320
0.53
$257
100
RHG PRO100-75
75
69
75.8
69.7
135
135
68
64
26-1/4
14-3/4
4
11
58
1
350
0.48
$284
100
RHG PRO100-73N*
73
–
73.7
–
116
–
68
64
26-1/4
14-3/4
4
11
58
1
350
0.48
$284
* SCAQMD rule 1121 compliance models.
• Specify LP gas when ordering. Add “P” suffix to the model number:
Example: RHG PRO75-70P.
Exclusive Professional Installation Warranty
When this Rheem PROFESSIONAL water heater is installed by a licensed
contractor, the consumer can upgrade his limited tank and parts warranty from
6 to 8 years by returning to Rheem the warranty registration card and a copy
of the contractor’s invoice.
This Rheem exclusive warranty upgrade feature enhances your value as a
plumbing professional. A professional installation is a better installation.
Refer to the warranty certificate enclosed with each heater for specific details.
9
Fury Now with the Guardian System
™
Available in 30, 40, 50 Gallon Tall – 30 and 40 Gallon Short Models
6-Year Limited Tank and Parts Warranty*
Get
4 MORE YEARS
Guardian System™
• One-of-a-kind air/fuel shut-off device offers double
protection
• Maintenance free – no filter to clean
• Standard replacement parts
Environmentally Friendly Burner
• Low NOx design for low nitrous oxide emissions
Self-Cleaning
• EverKleen™ patented system fights sediment build-up
• Reduces fuel costs
• Provides more hot water
Easy to Light
• No matches required
Energy Efficient
• More hot water at low operating cost
Longer Life
• Patented magnesium anode rod design incorporates a
special resistor that protects the tank from rust
DESCRIPTION
T
Y
P
E
H
E
TALL
T
A
L
L
S
H
O
R
T
GAL.
CAP.
40
50
29
40
40
38
50
50
50
30
40
40
50
MODEL NUMBER
42VR40-40F
42VR50-40F
22V30F
22V40-36F1
22V40F1
42V40F
22V50F1
42V50-40F
42V50-50F
22V30S-30F
22V40SF
42V40SF
42V50SF
FEATURES
GAS INPUT IN
THOUS. BTU/HR.
NAT.
LP
RECOVERY IN
G.P.H. 90° RISE
NAT.
LP
40
40
32
36
38
40
38
40
50
30
36
40
40
40.4
40.4
32.3
36.4
38.4
40.4
38.4
40.4
50.5
30.3
36.4
40.4
40.4
34
36
30
–
–
34
–
36
–
–
34
36
36
34.3
36.4
30.3
–
–
34.3
–
36.4
–
–
34.3
36.4
36.4
High Altitude Compliant
• All models are certified for applications up to 6,000
feet above sea level. Some models are certified up to
10,200 feet above sea level. Check factory for listing
Plus…
• Brass drain valve and temperature and pressure relief
valve are included
Conservation Act (NAECA) requirements
H
E
HIGH EFFICIENCY MODELS FEATURE:
• High performance and lower operating cost
• Compliant with many gas utility incentive programs
®
test procedures. D.O.E. national average fuel rate
ENERGY INFO.
FIRST HOUR
DEL. G.P.H.
NAT.
HT. TO
VENT
TANK
HT.
DIAM.
HT. TO
GAS
CONN.
VENT
SIZE
WATER
CONN.
CNTR.
HT. TO
SIDE
T&P
WATER
CONN.
SHIP.
WT.
(LBS)
ENERGY
FACTOR
NAT.
AVG. ANN.
OPER. COST
NAT.
68
83
50
67
73
68
90
83
83
50
72
72
84
63-1/4
62-1/4
59-3/4
61-1/2
61-3/4
61-1/2
61-1/2
61-1/2
62
49-3/4
52-3/4
53-7/8
54-1/4
59-3/4
58-3/4
56-3/8
58
58-3/8
57-3/4
58-1/4
58
58
46-1/4
49-3/8
50-1/2
49-3/4
21
23
16-1/8
17-3/4
18-1/8
19-3/4
20-1/8
21-3/4
21-3/4
19-3/4
20-1/8
20-1/8
22-1/4
14-1/2
14-1/2
14-1/2
14-1/2
14-1/2
14-1/2
14-1/2
14-1/2
14-1/2
14-1/2
14-1/2
14-1/2
14-1/2
3
3
3
3
3
3
3
3
4
3
3
3
3
8
8
8
8
8
8
8
8
8
8
8
8
8
53-1/2
52-1/2
50-3/4
53
52-1/4
52-1/4
51-3/8
52-1/2
52-1/2
40-1/4
42-3/4
44
44
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
135
165
100
120
120
125
130
150
150
98
130
130
158
0.62
0.62
0.62
0.59
0.59
0.60
0.58
0.58
0.58
0.61
0.59
0.59
0.59
$220
$220
$220
$231
$231
$227
$235
$235
$235
$224
$231
$231
$231
SPECIFY LP GAS WHEN ORDERING. Add “P” suffix to the model number. Example: 42VR40-40PF.
• For SCAQMD rule 1121 compliance models (California only), add “SQ” suffix to the model number. Example: 42VR40-40FSQ.
Rheem Guardian System Features…
Exclusive Combustion Shut-off System
Flame Arrestor Plate
Maintenance Free
Should a spill incident occur, the Guardian System shuts
off the gas supply and the air supply preventing a sustained vapor burn in the combustion chamber.
A specially-designed flame arrestor prevents ignition of
vapors outside the combustion chamber.
Superior air filtration prevents the flame arrestor from
becoming clogged by lint, dust and oil.
11
Fury Heavy Duty Gas Water Heaters
Available in 60, 75 and 100 Gallon Tall Gas Models
Get
4 MORE YEARS
• Designed for high volume applications
• High BTU input for fast recovery
• Extra durable brass drain valve
T
A
L
L
GAL.
CAP.
requirements
included
• Extra durable high temperature dip tube to
meet the most stringent plumbing codes
DESCRIPTION
T
Y
P
E
MODEL NUMBER
FEATURES
GAS INPUT IN
THOUS. BTU/HR.
NAT.
LP
RECOVERY IN
G.P.H. 90° RISE
NAT.
LP
®
FIRST HOUR
DEL. G.P.H.
NAT.
LP
HT. TO
VENT
TANK
HT.
56
DIAM.
HT. TO
GAS
CONN.
VENT
SIZE
ENERGY INFO.
WATER
CONN.
CNTR.
HT. TO
SIDE
T&P
WATER
CONN.
SHIP.
WT.
(LBS)
ENERGY
FACTOR
NAT.
AVG. ANN.
OPER. COSTS
NAT.
60
42V60-50NT*
50
50
50.5
50.5
107
107
60
23
13-1/4
4
8
48-1/2
3/4
180
0.56
$244
75
22VR75-70N*
70
69
70.7
69.7
109
109
64-1/2 60-1/2
26-1/4
14-3/4
4
11
54-1/2
1
320
0.53
$257
100
21V100
75
69
75.8
69.7
135
135
68
64
26-1/4
14-3/4
4
11
58
1
350
0.48
$284
100
21V100N*
73
–
73.7
–
116
–
68
64
26-1/4
14-3/4
4
11
58
1
350
0.48
$284
* SCAQMD rule 1121 compliance models.
• Specify LP gas when ordering. Add “P” suffix to the model number: Example: 21V100P.
13
PowerVent Induced Draft Gas Water Heater with the Guardian System
™
Available in 40 and 50 Gallon Models
With ProtectionPlus™ the 6-Year Limited Tank Warranty Becomes 10 Years!** SEE PG. 44.
• Self-Cleaning – EverKleen patented system fights
sediment build-up
• Reduces fuel costs and provides more hot water
• Patented magnesium anode rod design
Guardian System™
™
• Air/fuel shut-off system offers double protection
• Maintenance free –no filter to clean
Flammable Vapor Detection Sensor
incorporates a special resistor that protects the
tank from corrosion for longer life
• Electronic ignition system
• Standard 110 volt electrical connection
• Exceeds National Appliance Energy Conservation
Act (NAECA) and ASHRAE requirements
• Protective control system that disables the heater
Get
in the presence of flammable vapor accumulation
4 MORE YEARS
Flexible Venting Options
• Long venting lengths up to 100 feet
• PVC, ABS, or CPVC vent pipe options
• Vertical or horizontal termination
Plus…
• New Quiet Blower
• Self-Diagnostic System
• Environmentally Friendly Low NOx Burner
• High Altitude Compliant – Tall models are certified
for applications up to 7,700 feet and short models
up to 6,000 feet
DESCRIPTION
T
Y
P
E
GAL.
CAP.
TALL
SHORT
MODEL
NUMBER
FEATURES
GAS INPUT IN
THOUS. BTU/HR.
NAT.
LP
RECOVERY IN
G.P.H. 90° RISE
NAT.
LP
procedures. D.O.E. national average
fuel rate natural gas 91¢/therm;
LP $1.23/gallon.
®
ENERGY INFO.
FIRST HOUR
DEL. G.P.H.
NAT.
HT. TO
TOP OF
ASSEMBLY
TANK
HT.
DIAM.
HT. TO
GAS
CONN.
WATER
CONN.
CNTR.
HT. TO
SIDE T&P
VALVE
WATER
CONN.
SIZE
SHIP.
WT.
(LBS)
ENERGY
FACTOR
NAT.
AVG. ANN.
OPER. COSTS
NAT. GAS
40
42VP40F
40
40
40.4
40.4
68
69-1/4
59
19-3/4
14
8
53-1/2
3/4
140
0.64
$213
50
42VP50F
42
42
42.4
42.4
87
68-1/4
58
21-3/4
14
8
52-1/2
3/4
170
0.64
$213
40
42VP40SF
36
34
36.4
34.3
71
61-1/2
50-1/2
20-1/4
14
8
44
3/4
152
0.64
$213
50
42VP50SF
36
34
36.4
34.3
85
61-1/2
50-1/2
22-1/4
14
8
44
3/4
176
0.62
$220
• Specify LP gas when ordering. Add “PF” suffix to the model number. Example 42VP40PF.
VENTING INFORMATION FOR 2" VENTS
NUMBER OF
90° ELBOWS
WITH VENT
TERMINAL
VENTING INFORMATION FOR 3" VENTS
NUMBER
OF 45°
ELBOWS
MINIMUM
PIPE
LENGTH
REQ. (FT.)
MAXIMUM
PIPE
LENGTH
(FT.)
NUMBER OF
90° ELBOWS
WITH VENT
TERMINAL
NUMBER
OF 45°
ELBOWS
MINIMUM
PIPE
LENGTH
REQ. (FT.)
MAXIMUM
PIPE
LENGTH
(FT.)
One (1)
None
4.0
44.0
One (1)
One (1)
4.0
41.0
One (1)
None
5.0
95.0
One (1)
One (1)
5.0
Two (2)
None
4.0
92.5
38.0
Two (2)
None
5.0
Two (2)
One (1)
90.0
4.0
35.0
Two (2)
One (1)
5.0
Three (3)
None
87.5
4.0
32.0
Three (3)
None
5.0
85.0
Three (3)
One (1)
5.0
82.5
Four (4)
None
5.0
80.0
Four (4)
One (1)
5.0
77.5
Five (5)
None
5.0
75.0
For the 2" vent, one 90° elbow is approximately equal to
6 feet of pipe. One 45° elbow is approximately equal to
3 feet of pipe.
For the 3" vent,
one 90° elbow is
approximately
equal to 5 feet of
pipe. One 45°
elbow is approximately equal to
2.5 feet of pipe.
15
PowerVent High Efficiency, Induced Draft Gas Water Heater
Available in 75 Gallon Model
• Flexible venting options available
in PVC, ABC and CPVC,
see chart below
• Rated for installations up to 7,700 feet
• Electronic ignition system
• Allows vertical or horizontal
termination
• NEW! Quiet blower operation
• Heat traps included
• T&P valve provided
• Brass drain valve
• Natural gas models meet low NOx
requirements
DESCRIPTION
T
Y
P
E
GAL.
CAP.
TALL
75
FEATURES
GAS INPUT IN
THOUS. BTU/HR.
NAT.
LP
MODEL NUMBER
22VRP75
75
75
connection
• Exceeds National Appliance Energy
Conservation Act (NAECA) and
ASHRAE requirements
Integrated self-diagnostic
system control, thermostat
and gas valve
(Department of Energy) test procedures.
D.O.E. national average fuel rate natural
gas 91¢/therm; LP $1.23/gallon.
RECOVERY IN
G.P.H. 90° RISE
NAT.
LP
FIRST HOUR
DEL. G.P.H.
NAT.
LP
75.8
130
75.8
• Standard 110 volt electrical
130
®
ENERGY INFORMATION
HT. TO
TOP OF
ASSEMBLY
TANK
HT.
DIAM.
HT. TO
GAS
CONN.
WATER
CONN.
CNTR.
HT. TO
SIDE T&P
VALVE
WATER
CONN.
SIZE
SHIP.
WT.
(LBS)
ENERGY
FACTOR
NAT.
AVG. ANN.
OPER. COSTS
NAT.
69-1/2
60-1/2
26-1/4
14-3/4
11
54-1/2
1
325
0.53
$257
• Specify LP gas when ordering. Add “P” suffix to the model number; Example 22VRP75-P.
75 GALLON MODEL MAXIMUM AND MINIMUM VENT LENGTHS
SEA LEVEL (0-2,000 FT.): 3" VENT*
NUMBER OF
90° ELBOWS
WITH VENT
TERMINAL
NUMBER
OF 45°
ELBOWS
MINIMUM
PIPE
LENGTH
REQ. (FT.)
HIGH ALTITUDE (2,000-7,700 FT.): 3" VENT*
MAXIMUM
PIPE
LENGTH
(FT.)
NUMBER OF
90° ELBOWS
WITH VENT
TERMINAL
NUMBER
OF 45°
ELBOWS
MINIMUM
PIPE
LENGTH
REQ. (FT.)
SEA LEVEL TO HIGH ALTITUDE (0-7,700 FT.): 4" VENT*
MAXIMUM
PIPE
LENGTH
(FT.)
NUMBER OF
90° ELBOWS
WITH VENT
TERMINAL
NUMBER
OF 45°
ELBOWS
MINIMUM
PIPE
LENGTH
REQ. (FT.)
MAXIMUM
PIPE
LENGTH
(FT.)
One (1)
None
–
40.00
One (1)
None
–
35.00
One (1)
None
–
55.00
One (1)
One (1)
5.00
37.50
One (1)
One (1)
5.00
32.50
One (1)
One (1)
5.00
52.50
Two (2)
None
–
35.00
Two (2)
None
–
30.00
Two (2)
None
–
50.00
Two (2)
One (1)
–
32.50
Two (2)
One (1)
–
27.50
Two (2)
One (1)
–
47.50
Three (3)
None
–
30.00
Three (3)
None
–
25.00
Three (3)
None
–
45.00
Three (3)
One (1)
–
22.50
Three (3)
One (1)
–
42.50
* For the 3" and 4" vent, one 90° elbow is approximately equal to 5 feet of pipe. One 45° elbow is approximately equal to 2.5 feet of pipe.
17
Fury DV Rheemglas
®
Energy Miser® Direct Vent Gas Water Heater
NEW LONGER VENTING**
With ProtectionPlus™ the 6-Year Limited Tank Warranty Becomes 10 Years! SEE PG. 44.
• Adjustable coaxial vent allows flexibility
Get
4 MORE YEARS
DESCRIPTION
T
Y
P
E
TALL
SHORT
• Anode rod equalizes aggressive water
action
• Relief valve opening – side connect for
fast economical installation
• Durable plastic formula dip tube
of installation – uses outside air for
combustion and requires no electrical
power
• Aluminum vent and cap base to prevent
staining of building exterior
included
• Exclusive Rheemglas® tank lining
resists corrosion and prolongs tank life
• Gas control and combination thermostat
FEATURES
GAL.
CAP.
MODEL NUMBER
GAS INPUT IN
THOUS. BTU/HR.
NAT.
50
50
40
22DV50-40N*
22DV50-38
22DV40S-36N*
40
38
36
requirements
(Department of Energy) test procedures.
D.O.E. national average fuel rate
®
DIMENSIONS
RECOVERY IN
G.P.H. 90° RISE
NAT.
FIRST HOUR
DEL. G.P.H.
NAT.
HT. TO
VENT
A
TANK
HT.
B
40.4
38.4
36.4
85
85
65
68
72-107†
63-98†
57-1/4
57-1/4
48-1/4
ENERGY INFO.
DIAMETER
C
HT. TO
GAS CONN.
D
VENT
SIZE
E
HT. TO
SIDE T&P
F
SHIP.
WT.
(LBS)
ENERGY
FACTOR
NAT.
AVG. ANN.
OPER. COSTS
NAT.
21-3/4
21-3/4
21-3/4
14-1/4
14-1/4
14-1/4
5
6
6
51-1/4
51-1/4
43
164
164
152
0.58
0.58
0.59
$235
$235
$231
* For SCAQMD rule 1121 compliance.
† With vertical Vent Kit #SP20061. Venting dimensions are approximate.
• If side wall is combustible material, 1" clearance must be included in adjustment range.
NOTE: Maximum adjustment range for vent system is 10" for 22DV50-40N;
40" for 22DV40S-36N and 22DV50-38. Review installation manual before installation.
UPPER INLET
BOX ASSEMBLY
COLD WATER
CONNECTION
HOT WATER
CONNECTION
VENTING – ROUGHING IN DIMENSIONS (INCHES)
TYPE
TALL
TALL
SHORT
MODEL
NUMBER
22DV50-40N
22DV50-38
22DV40S-36N
4 FEET VENTING
AVAILABLE
N/A
Horizontal
& Vertical
SIDE VENTING (G)
MIN.
MAX.
8-1/8
8-1/8
8-1/8
18-1/8
48
48
REAR VENTING (H)
MIN.
3-1/8
3-1/8
3-1/8
MAX.
OPTIONAL HEIGHT (A)
WITH VENT KIT #SP20061
13-1/8
43
43
E
G
N/A
72-107†
63-98†
RANGE OF
ADJUSTMENT)
3/4" N.P.T.
RELIEF VALVE
OPENING
Up to 4 feet above the water heater and 4 feet from
an outside wall with 22DV50-38 and 22DV40S-36N.
Water heater equipped for venting up to 4 feet horiz.
Optional venting up to 4 feet vertical – order kit
#SP20061.
Rheem Exclusive Adjustable
Coaxial Vent Allows Flexibility
of Installation…
You may orient the Fury DV for easiest
service access, because the adjustable
coaxial vent can swivel 360 degrees.
H
(H: REAR VENTING
C
**NEW LONGER VENTING!
10"
(G: SIDE VENTING
A
B
RANGE OF
ADJUSTMENT)
24-3/4"
F
1/2"
D
2"
EXTERIOR
WALL
19
Warrior Gas Water Heater Specifically Designed for Manufactured Housing
5-Year Limited Tank Warranty* 1-Year Limited Parts Warranty*
• Optional air inlet and leg enclosure allows
outside air to be supplied to the water
heater without exposing the home to
cold air
• Two hole top for anode rod and hot water
outlet
• Factory installed temperature and pressure
relief valve – side location
• Exclusive Rheemglas® tank lining resists
corrosion and prolongs tank life
action
• Piezo ignitor – easy light pilot
• Field convertable controls for natural gas
or LP operation
DESCRIPTION
T
Y
P
E
TALL
GAL.
CAP.
30
40
FEATURES
MODEL NUMBER
21VR30T
21VR40T
requirements
action
• Cold water inlet – side connection allows
for quick, economical hook-up
®
DIMENSIONS
GAS INPUT IN
THOUS. BTU/HR.
NAT.
RECOVERY IN
G.P.H. 90° RISE
NAT.
FIRST HOUR
DEL. G.P.H.
NAT.
34
34
34.3
34.3
49
64
DIAM.
(IN.)
17-3/4
19-3/4
The Warrior is CSA certified for manufactured
home use, meets ANSI Standards for modular
home construction and complies with HUD safety
and construction standards.
PART NUMBERS
30 Gallon
40 Gallon
Air Inlet
AP11596
AP11596
Leg Enclosure
AE24609C
AE24609D
ENERGY INFO.
HT. TO
VENT
(IN.)
TANK
HT.
(IN.)
VENT
SIZE
WATER
CONN.
CNTR.
60-1/4
60-3/4
57
57-1/2
3
3
8
8
HT. TO
SIDE
T&P
SHIP.
WT.
(LBS)
51-1/2 110
51-1/2 125
ENERGY
FACTOR
NAT.
0.61
0.59
AVG. ANN.
OPER. COSTS
NAT.
$224
$231
Draft Diverter
New improved design
provides efficient heating
with down-draft
protection.
Optional Air Inlet
and Leg Enclosure
Galvanized wrap-around
leg enclosure and metal
tabular air inlet are
affixed to the base. Inlet
is equipped with a 1/2"
screen for protection
against rodents.
21
Warrior DV The Direct Vent Gas Water Heater for Manufactured Housing
Available in 30, 40 and 50 Gallon Models
®
DENT LAB
EN
OR
EP
UL
TE
®
ST
I
N
DESCRIPTION
T
Y
P
E
T
A
L
L
GAL.
CAP.
MODEL NUMBER
FEATURES
GAS INPUT IN
THOUS. BTU/HR.
NAT/ LP
RECOVERY IN
G.P.H. 90° RISE
NAT./LP
FIRST HOUR
DEL. G.P.H.
NAT./ LP
HT. TO
VENT
TANK
HT.
57
DIAM.
HT. TO
GAS
CONN.
ROOF
VENT
JACK
SIZE VENT SZ.
G
FO
R P U B LI C
TY
rate natural gas 91¢/therm; LP $1.23¢/gallon.
Y
OR
AT
requirements
for fast, economical hook-up
FE
®
• Certified for manufactured (HUD) and
modular construction
action
• Cold water inlet – side connection allows
AN
IN
D
• No external vented door is required
• All combustion air comes from outside the
home
• Provides maximum design freedom since it
can be placed anywhere within the home
• Hot water outlet located at top
relief valve – side location.
• Exclusive Rheemglas tank lining resists
• Field convertable controls for natural gas or
LP operation
SA
ENERGY INFORMATION
HT. TO
SIDE
T&P
WATER
CONN.
SHIP.
WT.
(LBS)
ENERGY
FACTOR
NAT./LP
AVG. ANN.
OPER. COSTS
NAT.
LP
30
21VR30DV
30
30.3
51
57
17-3/4
14-1/2
3
5
51-1/2
20
110
0.61
$224
40
21VR40DV
30
30.3
60
57-1/2 57-1/2
19-3/4
14-1/2
3
5
51-1/2
20
125
0.59
$231
$342
50
21VR50DV
32
32.3
67
57
21-3/4
14-1/2
3
5
51-1/2
20
150
0.58
$235
$348
57
THE WARRIOR DV IS U.L. CERTIFIED FOR MANUFACTURED HOME USE,
MEETS ANSI STANDARDS FOR MODULAR HOME CONSTRUCTION, AND
COMPLIES WITH HUD SAFETY AND CONSTRUCTION STANDARDS.
ROOF JACKS
12" Non Adjustable & Air Inlet
15-32" Adjustable & Air Inlet
AP12032E
AP12032B
AP12032C
AP12032D
AIR INLETS
6" Non Adjustable
11-22" Adjustable
AP12019B
AP12017B
EXTENSION PIPE KIT
Roof Jack Extension Pipe Kit
AP12021
• Roof jack and air inlet must
be ordered separately with
30, 40 and 50 gallon direct
vent models and must be in
accordance with instructions
furnished with the heater. No
other roof jack or air inlet
assemblies are approved for
installation with this heater.
Clamps and secure strapping
are packed in water heater
carton.
$331
Adjustable Roof Jack Vent
New design allows
adjustment to roof pitches
of up to 5/12". Four roof
jacks available to
accommodate roof
thickness of 12" up to 95".
Direct Combustion
Air Inlet
Air is drawn directly into
combustion chamber
through air inlet fixed to
base; 1/2" screen for
rodent protection.
23
Warrior DVX The Vertical Co-Axial Direct Vent Gas Water Heater for Manufactured Housing
• Installed side mounted T&P valve
• No external vented door required
• Can be placed anywhere in the home
• Field convertible controls for natural gas
• Certified for manufactured (HUD) and
modular construction
DIAM.
TANK
HEIGHT
VENT
SIZE
A
B
C
AN
IN
D
FO
R P U B LI C
FE
G
TY
®
N
I
UL
ST
FEATURES
DENT LAB
EN
OR
EP
TE
DESCRIPTION
®
rate natural gas 91¢/therm; LP $1.23¢/gallon.
Y
OR
AT
or LP operation
• 3/4" top connections for hot and cold
requirements
Venting
system eliminates the need to
•
cut a hole in the floor
SA
ENERGY INFORMATION
T
Y
P
E
GAL.
CAP.
TALL
50
22V50DVX
38
38.4
67
21-3/4
57
5
3/4
164
0.58
$235
$348
SHORT
40
22V40SDVX
36
36.4
62
21-3/4
48-1/4
5
3/4
152
0.59
$231
$342
MODEL NUMBER
GAS INPUT IN
THOUS. BTU/HR.
NAT/ LP
RECOVERY IN
G.P.H. 90° RISE
NAT./LP
FIRST HOUR
DEL. G.P.H.
NAT./ LP
THE WARRIOR DVX IS ANSI AND U.L. CERTIFIED FOR USE IN
MODULAR HOME CONSTRUCTION AND MANUFACTURED
HOME USE. THIS UNIT COMPLIES WITH HUD SAFETY AND
CONSTRUCTION STANDARDS.
29-1/4"
HOT WATER
CONNECTION
SHIP.
WT.
(LBS)
ENERGY
FACTOR
NAT./LP
AVG. ANN.
OPER. COSTS
NAT.
LP
C
ROOF JACK
VERTICAL VENT KITS
24-37" Adjustable
33-68" Adjustable
45-97" Adjustable
55-132" Adjustable
65-164" Adjustable
UPPER INLET
BOX ASSEMBLY
WATER
CONNECTION
SEE CHART
FOR ROOF
JACKS
AP13335A
AP13335B
AP13335C
AP13335D
AP13335E
Roof Jacks must be ordered separately
with this direct vent water heater and
installed in accordance with the instructions
furnished with the heater. No other roof
jack or vertical vent kit is approved for
installation with this heater.
A
B
COLD WATER
CONNECTION
25
Professional™ Sold and Installed Only by Plumbing Professionals
Available in 30, 40, 50, 65 and 80 Gallon Electric Models
Get
• Stainless steel lower heating element
• EverKleen™ self cleaning device
• Premium grade anode rod
• Temperature and pressure relief valve included
UL
Y
OR
AT
•
•
•
•
DIMENSIONS
DENT LAB
EN
OR
EP
FO
R P U B LI C
FE
G
TY
®
N
I
S
H
O
R
T
RHE PRO40-2
RHEH PRO40-2
RHE PRO52-2
RHE PRO66-2
RHE PRO80-2
RHEM PRO30-2
RHEM PRO52-2
RHES PRO30-2
RHES PRO40-2
RHES PRO50-2
®
rate electricity 8.6¢/KWH.
ST
MED.
40
40
50
65
80
30
50
30
38
47
MODEL NUMBER
FEATURES
TE
• Isolated tank design reduces conductive heat
loss
• Electric junction box located above heating
elements for easy installation
• Over-temperature protector cuts off power in
excess temperature situations
• Automatic thermostat keeps water at desired
temperature
DESCRIPTION
T
A
L
L
Conservation Act (NAECA) and C.E.C.
requirements
AN
IN
D
GAL.
CAP.
programs
®
4 MORE YEARS
T
Y
P
E
• Compliant with many electric utility incentive
SA
ENERGY INFORMATION
FIRST HOUR
RATING G.P.H.
RECOVERY
IN G.P.H.
@ 90° RISE
HEIGHT
(IN)
HEIGHT TO
WATER CONN.
DIAMETER
(IN.)
APPROX.
SHIP WT.
(LBS.)
56
57
67
71
88
44
62
42
46
55
21
21
21
21
21
21
21
21
21
21
46-3/4
59-1/4
57
58-3/4
59
36
46
30
31-1/2
32
46-3/4
59-1/4
57
58-3/4
59
36
46
30
31-1/2
32
22-1/4
17-3/4
22-1/4
23
24-1/2
19-3/4
24-1/4
22-1/4
23
26-1/4
104
96
123
160
181
80
128
83
108
149
ENERGY
FACTOR
0.94
0.92
0.94
0.92
0.92
0.93
0.93
0.93
0.92
0.91
AVERAGE
ANNUAL
OPER. COST
$402
$411
$402
$411
$411
$406
$406
$406
$411
$415
Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.
If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested.
Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
All models equipped with heat traps.
Recovery = wattage/2.42 x temp. rise °F.
4500W = 21 GPH
Example:
2.42 x 90°
27
Marathon™ …Shaping The Future
Available in 40, 50, 85 and 105 Gallon Electric Models
Lifetime Limited Tank Warranty* 6-Year Limited Parts Warranty*
MR40245
MR50245
MR85245
MR105245
MSR50245
FIRST HOUR
RATING G.P.H.
HEIGHT
(IN)
HEIGHT TO
WATER CONN.
52
61
91
104
54
21
21
21
21
21
61-1/2
62-3/4
66-1/4
66-3/4
47-1/4
62-1/2
63-3/4
67-1/4
67-3/4
48-1/4
• 240 volt AC single phase standard
• For height to top of T&P and heat traps add 3-1/2" to the height to
water connection.
Maximum test pressure: 300 PSI
Maximum working pressure: 150PSI
4500W = 21 GPH
Example:
2.42 x 90°
DIMENSIONS
RECOVERY
IN G.P.H.
@ 90° RISE
DENT LAB
EN
OR
EP
UL
Y
OR
AT
40
50
85
105
SHORT 50
T
A
L
L
MODEL NUMBER
®
G
FO
R P U B LI C
TY
®
N
FE
I
GAL.
CAP.
FEATURES
ST
DESCRIPTION
T
Y
P
E
protection against “dry-firing” – stainless
steel incoloy lower element for resistance to
lime build-up
• Factory installed conduit between element
control boxes
• All plastic tank eliminates the need for an
anode rod
relief valve
• Factory installed vacuum relief valve
AN
IN
D
™
• Thermally fused upper element provides
TE
• Seamless, blow-molded, polybutylene tank
– impervious to rust and corrosion
• Multiple layers of filament wound fiberglass
give the tank unmatched strength
• Polyurethane Envirofoam insulation helps
reduce energy consumption
• The highest energy factors (EF) available!
• Pipe wrap energy saving kit included to
achieve maximum energy savings
• Recessed drain valve is out of the way of
brooms and scrubbers
• Tough molded polyethylene outer shell
resists dents and scratches
• Bowl shaped bottom allows complete
sediment draining
• High temperature polysulfone dip tubes
SA
ENERGY INFORMATION
DIAMETER
(IN.)
APPROX.
SHIP WT.
(LBS.)
ENERGY
FACTOR
21-3/4
23-1/2
28-1/4
30-1/4
28-1/4
91
103
139
152
101
0.94
0.94
0.92
0.91
0.94
AVERAGE
ANNUAL
OPER. COST
$402
$402
$411
$415
$402
Your Marathon is warranted not to leak for as
long as you own your home*…
The Marathon offers this no-leak promise because of its superior,
non-metallic PermaGuard tank construction…A seamless blow
molded polybutylene inner tank with a filament wound fiberglass
outer tank for maximum strength. Superior performance, highefficiency and low operating cost…for a lifetime*!
* See Residential Warranty Information Brochure at your dealer for complete warranty information.
29
Fury Rheemglas
®
Energy Miser® Electric Water Heater
Available in 30, 40, 50, 65, 80 and 120 Gallon Tall – 30 and 50 Gallon Medium –
20, 30, 38 and 47 Gallon Short Models
• EverKleen™ self cleaning device
• Temperature and pressure relief valve included
• Isolated tank design reduces conductive heat loss
Get
efficiency resistored heating elements
4 MORE YEARS • High
• Anode rod equalizes aggressive water action
with ProtectionPlus
• Electric junction box located above heating
H
E
HIGH EFFICIENCY MODELS FEATURE:
• High performance and lower operating cost
• Compliant with many electric utility
incentive programs
™
elements for easy installation
• Over-temperature protector cuts off power in
excess temperature situations
• Automatic thermostat keeps water at desired
•
•
•
•
•
83VR40-2
83VR52-2
83VR66-2
83VR80-2
83MVR52-2
82V30-2
82V40-2
82VH40-2
82V52-2
82V66-2
82V80-2
82V120-2
82MV30-2
82MV52-2
82SV20-2
82SV30-2
82SV40-2
82SV50-2
FIRST HOUR
RATING G.P.H.
56
67
71
88
62
48
53
57
58
71
88
99
44
62
–
42
45
55
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
TANK
HEIGHT
46-3/4
57
58-3/4
59
46
45-3/4
46-1/2
59-1/4
57
58-1/2
59
62-1/2
36
46
31-1/2
30
31-1/2
32
HEIGHT TO
WATER CONN.
46-3/4
57
58-3/4
59
46
45-3/4
46-1/2
59-1/4
57
58-1/2
59
62-1/2
36
46
31-1/2
30
31-1/2
32
DIAMETER
22-1/4
22-1/4
23
24-1/2
24-1/4
17-3/4
19-3/4
17-3/4
19
21
23
28-1/4
19-3/4
21-3/4
17
22-1/4
23
26-1/4
APPROX.
SHIP WT.
(LBS.)
104
123
160
181
128
80
95
96
107
150
177
324
80
117
62
83
108
149
AN
IN
D
Y
OR
AT
40
50
65
80
MED. 50
30
40
T
40
A
50
L
L
65
80
120
30
MED.
50
20
S
H
30
O
38
R
T
47
T
A
L
L
MODEL NUMBER
RECOVERY
IN G.P.H.
@ 90° RISE
UL
FO
R P U B LI C
FE
G
TY
®
N
I
H
E
GAL.
CAP.
FEATURES
DENT LAB
EN
OR
EP
ST
DESCRIPTION
T
Y
P
E
®
TE
temperature
• Meets or exceeds requirements of the National
Appliance Energy Conservation Act (NAECA)
SA
ENERGY INFORMATION
ENERGY
FACTOR
0.94
0.94
0.92
0.92
0.93
0.93
0.92
0.92
0.91
0.89
0.86
0.85
0.93
0.90
N/A
0.93
0.92
0.91
AVERAGE
ANNUAL
OPER. COST
$402
$402
$411
$411
$406
$406
$411
$411
$415
$425
$439
$444
$406
$420
N/A
$406
$411
$415
Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.
If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested. Recovery = wattage/2.42 x temp. rise °F.
Single element models available on special order (6000W max.). Substitute “-1” for “-2” in model number.
4500W = 21 GPH
Example:
Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
2.42 x 90°
All models equipped with heat traps.
31
Warrior Rheemglas
®
Electric Water Heater for Manufactured Housing
Available in 20, 30, 40 and 50 Gallon Side Connect Models
• Lifeguard stainless steel element**
• Meets H.U.D. Safety and Construction
Standards, ASHRAE 90A-80 and
• Isolated tank design reduces heat loss
National Appliance Energy Conservation
• High efficiency heating elements
Act (NAECA) requirements
Design evaluated in accordance with Part 3280.707(d)(1)
(2) of HUD Mobile Home Construction and Safety
• Anode rod equalizes aggressive water action orStandards
for Energy Efficiency.
• Automatic temperature control thermostat * See Residential
Warranty Information Brochure for complete
• Over-temperature protector automatically
™
®
TANK
HEIGHT
HEIGHT TO
WATER CONN.
DIAMETER
APPROX.
SHIP WT.
(LBS.)
AN
IN
D
UL
Y
OR
AT
MODEL NUMBER
RECOVERY IN G.P.H.
@ 90° RISE
3500 WATTS
4500 WATTS
DENT LAB
EN
OR
EP
FO
R P U B LI C
FE
G
TY
®
N
I
GAL.
CAP.
FEATURES
FIRST HOUR
RATING G.P.H.
3500 WATTS
4500 WATTS
®
ST
DESCRIPTION
T
Y
P
E
** Double element models upper element only.
TE
cuts off power in excess temperature
situations
• Electrical junction box (for 1/2" and 3/4"
conduit) placed above heating elements
for easy installation
SA
ENERGY INFORMATION
ENERGY
FACTOR
AVERAGE
ANNUAL
OPER. COST
SIDE CONNECT
T
A
L
L
20
30
40
50
72V20-1
72V30-2
72V40-2
72V52-2
–
41
47
51
–
46
51
56
–
16
16
16
–
21
21
21
31-1/2
45-1/2
46-3/4
57
25-1/2
39-3/4
40-1/4
50-3/4
17-3/4
17-3/4
19-3/4
19-3/4
62
70
94
108
N/A
0.93
0.92
0.91
N/A
$406
$411
$415
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested.
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 3500 watt or 4500 watt heating elements. 71-20 furnished with standard 120
volt AC, single phase, 2000 watt heating element.
• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
• For single element, substitute “-1” suffix for “-2”.
4500W = 21 GPH
Example:
2.42 x 90°
33
Marathon™ Point-of-Use…With The All Plastic Tank That Can’t Corrode
Available in 15 and 20 Gallon Electric Models
Residential Use: Lifetime Limited Tank Warranty, 6-Year Limited Parts Warranty*
Light Duty Commercial Use: 10-Year Limited Tank Warranty, 1-Year Limited Parts Warranty*
MR15120
MR20120
MR20230
ELEMENT
WATTAGE
VOLTAGE
TANK
HEIGHT
2000
2000
3000
120
120
240
31-3/4
30-1/2
30-1/2
Marathon Point-of-Use water heaters are
built to the same specifications as our fullsize Marathons. These point-of-use water
heaters are great for applications where the
larger water heaters won’t fit, or for special
uses such as:
• Apartments and condo’s
• Restrooms in offices and commercial
buildings
• Cabins, camps and recreational property
• Lavatories in large homes away from
central water heating system
®
HEIGHT TO
WATER CONN.
35-3/4
34-1/2
34-1/2
DENT LAB
EN
OR
EP
UL
G
FO
R P U B LI C
TY
®
N
FE
* See Residential Warranty
Information Brochure for
Y
OR
AT
15
20
20
MODEL NUMBER
against “dry-fire”; low watt, density for
long life
• Factory installed temperature and
pressure relief valve
• Factory installed vacuum relief valve
• Inlet and outlet connections are 3/4" NPT
• Water tight grommets keep out overhead
moisture and condensation
I
GAL.
CAP.
FEATURES
anode rod
• Thermally fused element to protect tank
ST
DESCRIPTION
• All plastic tank eliminates the need for an
TE
tank – impervious to rust and corrosion
• Multiple layers of filament wound fiberglass give the tank unmatched strength
• Polyurethane Envirofoam™ insulation
helps reduce energy consumption
• The most energy efficient in its class
• Recessed brass drain valve is out of the
way of brooms and scrubbers
• Tough molded polyethylene outer shell
resists dents and scratches
• Bowl shaped bottom allows complete
sediment draining
• High temperature polysulfone dip tubes
AN
IN
D
• Seamless, blow-molded, polybutylene
SA
ENERGY INFORMATION
TANK
DIAMETER
APPROX.
SHIP WT.
(LBS.)
ENERGY
FACTOR
AVERAGE
ANNUAL
OPER. COST
21-3/4
23-3/4
23-3/4
46
51
51
N/A
N/A
N/A
N/A
N/A
N/A
The Marathon Point-of-Use Water Heater Warranty
RESIDENTIAL USE
LIFETIME / 6 YEARS*
Privately owned, single family dwellings – the tank is warranted not to leak
“for as long as you own your home”. If the home is sold, the warranty reverts
to fifteen years from the date of the installation and the second owner receives
coverage for the time remaining. Parts are warranted for 6 years from the date
of manufacture or 5 years from the effective date, whichever is greater.
LIGHT DUTY COMMERCIAL USE
10 YEARS /1 YEAR*
Apartments, condominiums, restrooms in office and commercial buildings,
multifamily housing or any light duty commercial/industrial use – the tank is
warranted for 10 years from the date of installation. Parts are warranted for
1 year from the date of manufacture.
* See Marathon Point-of-Use Warranty Information Brochure at your dealer for complete
35
Point-of-Use Rheemglas
®
Energy Miser® Electric Water Heaters
Available in 2-1/2, 6, 10, 15, 20 and 30 Gallon Models
2-1/2 Gallon
2-1/2 gallon model features:
• 120 volt model with 3 prong cord set…
simply plug it in! 240 volt model includes a
junction box for easy installation of 1/2" or
3/4" conduit
• Wall bracket for easy wall mount installations
• Corrosion resistant 1/4 turn drain valve
• Space-saving design for installation in
limited spaces
• High efficiency heating element
included
• Over-temperature protector cuts off power
in excess temperature situations
• Automatic thermostat keeps water at
desired temperature
requirements
14
15-1/4
23
24-1/4
25-1/4
30
HT. TO HOT
WATER OUTLET
14
12-1/2
20-1/2
22
22-3/4
23
DIAMETER
HT. TO
SIDE T&P
9-3/4
15-3/4
15-3/4
17-3/4
19-3/4
21-3/4
–
11-1/2
19-1/2
21
21-3/4
23
HT. TO COLD
WATER INLET
–
4-1/4
4-1/4
4-1/2
5
2-3/4
Y
OR
AT
81VP2S
81VP6S
81VP10S
81VP15S
81VP20S
82VP30-1*
HEIGHT
FO
R P U B LI C
FE
G
TY
®
N
I
2.5
6
10
15
20
30
MODEL NUMBER
UL
ST
DESCRIPTION
DENT LAB
EN
OR
EP
TE
6, 10, 15, 20 and
30 Gallon
GAL.
CAP.
AN
IN
D
®
SA
ENERGY INFORMATION
APPROX.
SHIP WT.
(LBS.)
ENERGY
FACTOR
22
36
46
54
69
91
N/A
N/A
N/A
N/A
N/A
0.93
AVERAGE
ANNUAL
OPER. COST
N/A
N/A
N/A
N/A
N/A
$406
* For double element, substitute “-2” suffix for “-1”. Not available in 120 volt. Available with 2-wire (single phase) outlet only. (6000 watt max.).
• 2.5 gallon model: 1⁄2" N.P.T. inlet and outlet. Relief valve connection 3⁄4".
Available with 120 or 240 volt AC single phase only, 120v (1440w) 240v (1500w)
Power cord supplied with 120 volt models only.
Optional 14" diameter safety catch pan with 1" side drain outlet available (Part No. AS-21990A-G).
• 6 through 30 gallon models: 3⁄4" N.P.T. outlet, inlet, anode rod. T & P valve connections. Not available with 3 phase wiring.
Water heaters furnished standard with 120 volt AC, 2000 watt single element.
Special wiring options – a limited number of wiring options are available. Consult factory for price and availability.
CONSTRUCTION DETAILS: The cold water enters the tank a few inches from the bottom. Both hot and cold water lines may be connected
directly to the water heater without special nipples or tees. The relief valve simply screws into the opening provided.
37
Table Top Rheemglas
®
Energy Miser® Electric Water Heaters
Available in 40 Gallon Model
88H-40D
DIMENSIONS
FIRST HOUR
RATING G.P.H.
RECOVERY
IN G.P.H.
@ 90° RISE
WIDTH
(IN.)
HEIGHT
(IN)
45
21
25
36
®
DENT LAB
EN
OR
EP
UL
G
FO
R P U B LI C
TY
®
N
FE
procedures. D.O.E. national average
fuel rate electricity 8.6¢/KWH.
Y
OR
AT
40
MODEL NUMBER
I
GAL.
CAP.
FEATURES
elements are completely immersed all the heat goes into the water
• Extra thick fiberglass insulation
• Automatic thermostat keeps water at
desired temperature
requirements
ST
DESCRIPTION
T
Y
P
E
®
TE
panel permit water heater to fit snugly
against wall
• Cold water inlet, hot water outlet, relief
valve and electrical connections at top
of tank for easy access and fast
economical installation
• Rheemglas tank lining resists
• Direct immersion resistored heating
AN
IN
D
• 36" high top features a four inch high
integral back splash
• Baked enamel top is acid and heat
resistant
• High efficiency screw-in type heating
elements
included
• Recessed base and channel in back
SA
ENERGY INFORMATION
HEIGHT TO
WATER CONN.
33
APPROX.
SHIP WT.
(LBS.)
ENERGY
FACTOR
AVERAGE
ANNUAL
OPER. COST
156
0.88
$429
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested.
• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
4500W = 21 GPH
2.42 x 90°
Example:
39
Solaraide™ Storage Tank and Electric Storage Water Heaters for Solar Applications
Available in 80 and 120 Gallon Side Connect and Top Connect Models
tank bottom to prevent mixing with
heated water
action for prolonged tank life
valve and anode rod at top of tank for
easy access and fast, economical
installation
• Automatic temperature control
• Over temperature protector
®
MODEL NUMBER
SIDE CONNECT
80 81VR80-1
T
120 81VR120-1
A
L
80 81VR80-T
L
120 81VR120-T
TOP CONNECT
80 81VR80TC-1
T
120 81VR120TC-1
A
L
80 81VR80TC-T
L
120 81VR120TC-T
• All units furnished standard 240 volt AC.
• Units are shipped with a 4500 watt
element. If heating elements of different wattages than those shown are
demanded by zone requirements,
they must be specifically requested.
• Solaraide models meet all current
requirements for solar storage tanks.
• The tanks are Rheemglas lined and are
designed to operate up to 150 PSI.
G
FO
R P U B LI C
TY
FE
I
GAL.
CAP.
Y
OR
AT
®
N
DIMENSIONS
MAXIMUM
WATTAGE
UPPER
UL
ST
DESCRIPTION
T
Y
P
E
DENT LAB
EN
OR
EP
TE
single element water heater, both specially
equipped for installation with residential
direct solar systems
• Special threaded stud located near the
outlet for attachment of tank sensors
included
• Collector feed and return fittings located at
front of tank for convenient installation
• Isolated tank design for better heat
retention
heating element
• High efficiency
• Rheemglas® tank lining resists corrosion
and prolongs tank life
• Cold water inlet brings cold water to
AN
IN
D
• Choice of two models…storage tank or
SA
ENERGY INFORMATION
HEIGHT
(IN)
6000 W
6000 W
Storage Only
Storage Only
24-1/2
28-1/4
24-1/2
28-1/4
58-3/4
62
58-3/4
62
7
7
7
7
37
37
37
37
192
336
192
336
R-17.3
R-16.7
R-17.3
R-16.7
6000 W
6000 W
Storage Only
Storage Only
24-1/2
28-1/4
24-1/2
28-1/4
58-3/4
62
58-3/4
62
–
–
–
–
–
–
–
–
192
336
192
336
R-17.3
R-16.7
R-17.3
R-16.7
SIDE CONNECT
Raised 7" from the bottom, the
outlet to the solar collector panel
helps prevent scale and
sediment from entering the
circulating through the solar
system.
HEIGHT
TO COLLECTOR
RETURN (IN)
APPROX.
SHIP WT.
(LBS.)
APPROX.
RFACTOR
DIAMETER
(IN.)
HEIGHT
TO COLLECTOR
FEED (IN)
TOP CONNECT
A special threaded stud is also
welded to the tank behind the
lower cavity opening. Low voltage
sensor wire is run from this point
inside the jacket and out the top
for easy control connection.
A special threaded stud is also welded to the tank near
the outlet for attachment of tank sensors.
41
Solaraide™ HE Solar Heat Exchanger, Solar Tank, or Electric Storage Water Heater
Available in 80 Gallon Models
bottom to prevent mixing with heated
water
action for prolonged tank life
valve and anode rod at top of tank for
easy access and fast, economical
installation
• Automatic temperature control
• Over temperature protector
®
DENT LAB
EN
OR
EP
UL
ST
I
DESCRIPTION
TALL
GAL.
CAP.
80
80
MODEL NUMBER
81V80HE-1
81V80HE-T
DIMENSIONS
MAXIMUM
WATTAGE
UPPER
6000 W
Storage only
DIAMETER
(IN.)
HEIGHT
(IN)
HEIGHT
TO COLLECTOR
FEED (IN)
24-1/2
24-1/2
58-3/4
58-3/4
6
6
• Heaters furnished standard 240 volt AC.
• Units are shipped with a 4500 watt element. If heating elements of different
wattages than those shown are demanded by zone requirements, they must
be specifically requested.
• To prevent corrosion, proper pH levels in transfer fluid must be maintained.
• Solaraide models meet all current state requirements for solar storage tanks.
• The tanks are Rheemglas lined and are designed to operate up to 150 PSI.
A special 1/2" NPT opening
is provided for installation of a
“probe type” thermostat.
G
FO
R P U B LI C
TY
TE
®
N
T
Y
P
E
Y
OR
AT
AN
IN
D
single element water heater, both specially
equipped for installation with residential
direct solar systems
included
• Collector feed and return fittings located at
front of tank for convenient installation
• Isolated tank design for better heat
retention
heating element
• High efficiency
• Rheemglas® tank lining resists corrosion
and prolongs tank life
• Cold water inlet brings cold water to tank
FE
• Choice of two models…storage tank or
SA
ENERGY INFORMATION
HEIGHT
TO COLLECTOR
RETURN (IN)
APPROX.
SHIP WT.
(LBS.)
30
30
192
192
APPROX.
RFACTOR
R-17.3
R-17.3
COPPER COIL DATA (Type L Copper)
Maximum pressure = 150 psi
Maximum temperature = 185°F.
Tube I.D. = 5/8"
Solaraide HE
Tank Capacity
80 Gallons
Coil Capacity
Gallons
2.2
Length of Tubing
Around Tank (Ft)
120
PRESSURE DROP THROUGH COIL (Feet of H20)
Head Loss (Feet)
Flow Rate
80 Gallon
1 GPM
1.3
2 GPM
4.8
3 GPM
10.0
43
ProtectionPlus™ 4 Year Limited Warranty Extension Kit
The best water heater warranty in the industry comes in the smallest box!
Part Number: SP20079 (Sold only in 6 package quantity)
For use on Rheem® Residential Fury, Professional, PowerVent and Direct Vent models*
•
Kit contains:
High quality magnesium anode rod with plastic lined nipple (hot side)
Plastic lined nipple (cold side)
Warranty certificate with installation instructions
ProtectionPlus label for heater
Provides up to 135% additional anodic protection
With just two water heaters, you have the option of
Y E A R
L I M I T E D
TA N K W A R R A N T Y
selling four warranty periods
BECOMES
Effectively have four water heaters in little more
space than two
Y E A R
L I M I T E D
™
•
•
•
* Not for use on: Warrior, Warrior DV, Marathon, Point-of-Use,
or Table Top models.
6
8
TA N K
W A R R A N T Y
BECOMES
10
12
44
Lifeguard™ Electric Element
High density nichrome wire electric
heating filament; best grade A, 80/20
nichrome wire made…for top
performance and long-life operation.
High-grade magnesium oxide
packing moves the heat
quickly to the element’s
surface, protecting the
nichrome wire filament and
boosting efficiency.
Designed for the future, the LIFEGUARD™ electric water heater
element is as close to a lifetime element as space-age technology
can produce*.
Patented resistor design** helps prolong anode rod and tank life…
A Rheem Exclusive!
* See Residential Warranty Information Brochure for complete warranty information.
** Registered trade-mark of International Nickel Co.
Steel screw-in head
provides solid construction
and ease of maintenance.
INCOLOY® 840 stainless steel sheath,
resists water chemical corrosion and
burn-out even in air or sediment for
long element life, long life performance.
Low watt density design delivers
full watt-rated heating power to a
larger surface area, eliminating
high heat concentrations and
prolonging element life.
45
EverKleen™
• Fights Sediment Build-Up
• Helps Preserve Operating Efficiency
• Helps Improve Tank Life
• Provides Increased Deliverability
Sediment build-up in a water heater creates layers of non-conducting material between the
water and the energy that heats the water. This causes a reduction of heat transfer which
increases tank bottom temperatures and decreases water temperatures. When this occurs,
the results are decreased water heater efficiency and decreased tank life.
The EverKleen™ system helps to dislodge this sediment by channeling water through a specially developed inlet tube. This tube
creates a high-velocity spiraling water stream which strikes the bottom of the water heater tank with sediment “busting” force.
The spiraling effect also creates better mixing throughout the water heater tank which reduces the effects of stacking. Stacking
occurs when frequent small draws of water create different temperatures throughout the tank resulting in increased peak
temperatures at the top of the tank. The EverKleen™ system greatly reduces peak temperatures, thus increases first hour
deliverability.
Included at no extra charge on all Rheem Fury and Professional ™ models.
46
Accessories
CATCH PAN KIT
WALL MOUNTING KIT
Available in 5 sizes to help protect any installation area
from possible water damage. Each 2" deep drain pan is
manufactured of aluminum and fitted with a 1" drain outlet.
Provides that extra level of “protection assurance” that
many homeowners and apartment dwellers are looking for.
Available in 18", 20", 22", 24",
and 261⁄2 " diameters. Our
specially designed,
tapered side wall
allows for “oneinside-the-other”
stacking and
minimal storage
area. Available with
side drain outlet.
For Point-of-Use Electric Water Heaters
This wall mounting kit for point-of-use electric water
heater installations provides an easy way to mount the
unit off the floor, out of the
way for more usable floor
space in a small area. It’s
been designed for use with
6, 10, 15, and 20 gallon
models (AS-36111) and all
walls with 16 " stud centers.
All necessary parts are
included in this easy to install,
time-and-money saving kit.
Catch pan must conform
to local codes.
47
Therm-X-Guard Thermal Expansion Tanks
Eliminates problems associated
with thermal expansion in closed
loop systems.
B
• 5 year limited tank warranty
• Suitable for water heaters up to
B
120 gallon capacity and supply
pressure to 80 PSI.
MODELS: RRT-5, RRT-12
Maximum Operating Conditions (Vt) Total
Volume Diameter Height
Operating
Working
Model
(A)
(B)
Number* Temperature Pressure (PSIG) (Gallons)
RRT-50
RRT-12
RRT-25
200°F (93°C) 150 (10.5 kg/cm2)
200°F (93°C) 150 (10.5 kg/cm2)
200°F (93°C) 150 (10.5 kg/cm2)
2.0
4.4
10.3
08"
11"
153⁄8"
12 5⁄8"
15"
151⁄4"
System
Connection
MODEL: RRT-25
Standard Factory
Pre-charge
Diaphragm
Material
Liner
Material
⁄4" NPTM – BRASS 40 PSIG (2.8 kg/cm2) Butyl Rubber Polypropylene
3
⁄4" NPTM – BRASS 40 PSIG (2.8 kg/cm2) Butyl Rubber Polypropylene
3
1" NPTF – BRASS 40 PSIG (2.8 kg/cm2) Butyl Rubber Polypropylene
48

pocket guide - API of NH/Delta T

Transcription

Similar documents

The Next Necessity™ - InSinkErator Image Server

compresor nebulizador pingüino compresseur nébuliseur penguin

RV Camping Checklist

COMF RT

Energy Savings - Boston Heating Supply

www.cbradio.nl: Comparison Chart Galaxy DX

hearts aflutter tank top

suzuki - Fuelpak

Warranty Reimbursement - Bellavia Blatt and Crossett, PC

Valplast Warranty - Ultimate Dental Laboratory