Betta Dental

Transcription

Betta Dental
for marginal fit. Next, all four veneers were
tried-in together with a small amount of
transparent try-in paste to confirm contacts
and aesthetics. The porcelain was prepared
and the teeth treated with a 5th generation
bonding agent (Excite F single), before
seating with a light-cure-only veneer resin
cement (Variolink Veneer). Occlusion was
refined and the margins polished.
Conclusion
Lithium disilicate restorations (IPS e.max
Press) enable dentists to offer patients a
conservative alternative while transforming
the appearance of their smiles. With
lithium disilicate, achieving translucent
incisal effects, such as detailed dentine lobe
structure and dynamic translucency, often
requires cutback and layering. However, the
availability of Opal lithium disilicate ingots
enable stained and glazed restorations to be
fabricated that blend in seamlessly with the
remaining dentition. In the presented case,
the patient was happy with the need for only
minimal tooth reduction, and more than
pleased with the function and aesthetics of
the IPS e.max Press restorations using the
Opal 1 ingot.
2.
3.
4.
The glossary of prosthodontic terms. J Prosthet
Dent. 1999;81(8):39-110.
6. Hoofard, S, Wehrkamp S. Pressed aesthetics:
creating highly aesthetic pressed veneers using
Ivoclar Vivadent’s IPS e.max Press lithium
disilicate. dlpmagazine.com. 2010; 1-6.
7. Tysowsky GW. The science behind lithium
disilicate: a metal-free alternative. Dent Today.
2009;28(3):112-13.
8. Reynolds JA, Roberts M. Lithium-disilicate
pressed veneers for diastema closure. Inside
Dentistry. 2010;6(5):46-52.
9. Helvey GA. Chairside cad-cam. lithium disilicate
restoration for anterior teeth made simple. Inside
Dentistry. 2009;5(10):58-66.)
10. McLaren EA, Phong TC. Ceramics in
dentistry: classes of materials. Inside Dentistry.
2009;5(9):94-103.)
11. Ritter RG, Culp L. Ingot selection for
aesthetic restorations using contemporary
pressed ceramics. Pract Proced Aesthet Dent.
2002;14(6):472-78; quiz 470.
12. In pursuit of nature. IPS e.max Press Impulse.
Schaan, Liechtenstein: Ivoclar Vivadent; August
2010.
For more information on this technique and
materials used in this article, contact your local
Ivoclar Vivadent Territory Manager or call 1300
486 252 or email [email protected].
Figure 13. Left lateral postoperative closeup of the
final restorations.
Figure 14. Right lateral postoperative closeup of the
final restorations.
Author Biographies
References
1.
5.
Sorensen JA, Cruz M, Mito WT, Raffeiner O,
Meredith HR, Foser HP. A clinical investigation
on three-unit fixed partial dentures fabricated
with a dual-curing adhesive system and a selfcuring resin cement. J Adhes Dent. 2006;8(6):427431.
Höland W, Schweiger M, Frank M, Rheinberger
V. A comparison of the microstructure and
properties of the ips empress 2 and the ips
empress glass-ceramics. J Biomed Mater Res.
2000;53(4):297-303.
Kheradmandan S, Koutayas SO, Bernhard M,
Strub JR. Fracture strength of four different
types of anterior 3-unit bridges after thermomechanical fatigue in the dual-axis chewing
simulator. J Oral Rehabil. 2001;28(4):361-369.
Guess Pc, Zavaneeli RA, Silvia NR, Bonfante EA,
Coelho PG, Thoompson VP. Monolithic cad/cam
lithium disilicate versus veneered y-tzp crowns:
comparison of failure modes and reliability after
fatigue. Int J Prosthodont. 2010;23(5):434-42.
Franklin Shull, DMD, graduated from MUSC Dental School in 1993, after which he
completed his general practice residency in Columbia, SC. He now maintains a private
practice in Lexington, SC. Dr. Shull has faculty appointments at the Palmetto Richland
Hospital General Practice Residency program, Medical College of Georgia, School of
Dentistry, and the L.D. Pankey Institute. He can be reached at (803) 808-0888, or email:
[email protected], or www.positivelypda.com.
Matt Roberts, AAACD, began his career fabricating aesthetic reconstructive restorations
more than 30 years ago and established CMR Dental Lab in 1978, where he still pursues
his passion for excellence in aesthetics and function. As a member of both the America
Academy of Esthetic Dentistry and one of only 26 accredited dental technicians in the
American Academy of Cosmetic Dentistry, he remains on the forefront of his field, sharing
his ideas through continuing education programs and other teaching venues. As founder
of the Team Aesthetic Education program, he provides hands-on training for dentists and
technicians, works with manufacturers to develop and improve products, and provides
Internet-based video education, as well.
Shop online with
Betta Dental
t
Fasery!
v
Deli
& get a 5% discount
on every order, every day.
Freecall: 1800 339 677
www.bettadental.com
21
No5 LabWorks 2012.indd 21
11/11/12 9:26 PM