CXL2-500 LOG SET

#CXL2-500 LOG SET
NOTE: Log numbers are located on the bottom of each log.
Refer to the following instructions and illustrations for proper
log placement.
CAUTION: Do not place logs directly over burner port holes.
Improper log placement may affect flame appearance and may
cause excessive soot to build upon the glass.
HUSSONG MANUFACTURING CO., INC.
1. Position the ember panel 2CX in front of the burner.
2. Align the holes in bottom of logs 1CX, 3CX, and 4CX with the
mounting on the burner. Push logs down onto the pins to seat.
3. Align logs 5CX and 8CX with the notches on the base logs.
4. Position logs 6CX and 7CX as shown.
5. Distribute rockwoll embers onto the logs and burner using a
stiff bristle brush.
CXL2-500 REV-01