Your Production Matters To Us - Used Cnc Machines Canada | Cnc

Transcription

July 2013
Volume 28 Number 7
Phone: 905-528-7765
Fax: 905-917-0222
www.cluemachines.com
email: [email protected]
M A C H I N E R Y
Your Production
Matters To Us
We offer innovative solutions to increase your productivity
PLASMA MACHINE
PRESS BRAKES
FIBER LASER
SHEARS
PLATE ROLLS
PUNCH PRESS
PROFILE ROLLS
ONTARIO - EASTERN CANADA
3980 Chadburn Crescent
Mississauga, ON L5L 3X4
Tel: 905-820-3232
Fax: 905-820-3234
WESTERN CANADA
Westside Service Ltd
4406-58 St. South
Lethbridge, AB T1K7E2
Tel: 403-380-5047
Fax: 403-380-5048
Quality | Service | Value | www.ferricmachinery.com
100%
Electric
Page 2
Clue July, 2013
MACHINERY IN INVENTORY
THE MACHINE TOOL SPECIALISTS
Full range of new and used machinery
VISIT OUR WEBSITE TO VIEW OUR EXTENSIVE INVENTORY
Accurpress Press Brake, 12’ x 175 Ton
Lilian CNC Mill, Accurite, Cabinet with tooling
We will buy your surplus machines or complete plants
Proturn Lathe, 10’ x 26”
Microcut Lathe, Micropanther 446
Milltronic Machine Center RW15
Cincinnati Shear, 12’ x 1/2”
Hyd-Mech- Automatic Bandsaw
Model H22-A, 20” x 22”
Timesaver Wet Sander 37”
Clue July, 2013
Page 3
63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada
Tel: (905) 669-7507 Fax: (905) 669-7512
e-mail: [email protected] web: www.tradermachinery.com
BORING MILLS, CNC, HORZ, FLOOR
5"
GIDDINGS & LEWIS, X-36’ Y-14.7’, Mitsi S60 control
BORING MILLS, HORZ, TABLE
4.33"
TOSHIBA, BTD11-ER16, X-78.74" Y-59" W (Saddle)-78.74", Tosnuc 777, 4-Axis,
B-axis Rotary tbl
BORING MILLS, CNC, HORZ, TABLE
5"
MAZAK, V655/60 (1996), X-59" Y-25" Z-25", M-Plus, #50 taper
FADAL, VMC-8030 (2002), X-80" Y-30" Z-30", Fadal MP control
FADAL, 8030 (2002), X-80" Y-30" Z-30", CAT 40, 10,000rpm
DMG, DMF 250 (2003), X-98.4" Y-36.2" Z-32.3", Heidenhain iTC530
MILLS, CNC
16" x 35"
BORING MILLS, VERT
63"sw
BRAKES, PRESS
DRILLS, COLUMN & BENCH
1-3/8"cap
17"
“New” DRILLMASTER, Z5035, Geared Head
CRAFTSMEN, 5/8" chk, Floor standing
DRILLS, RADIAL
3’ arm
BOYAR-SCHULTZ, manual
“New” KENT, KGS-200
CHEVALIER, FSG-618M, Manual
DARBERT (1998), Auto. Downfeed
CHEVALIER, FSG-1640ADII (2003)
SNOW, Hydraulic
IRONWORKERS
55 Ton
“NEW” MAKO, Universal, 5"x 5"x 3/8" angle
9"x 42"
9"x 42"
9" x 49"
9"x 49"
10"x 50"
10"x 50"
10" x 54"
11"x 43"
15"x 60"
5000 Watt
MAZAK (1999), New Turbo X-510
TRUMPF, L2530 (1999), 50"x 100", Siemens 840D, Dual pallet
TRUMPF, L3030 (1998), 5’x 10’
TRUMPF, L2530 (1998), 4’x 8’
PRIMA (2004), 5’x 10’
CINCINNATI, CL-7A, 5’x 10’, 1997/2002, Fanuc 16M & PC based
PRIMA, Prima Domino (2007), 2D / 3D, 6-Axes Combination, 5’ x 10’ tbl., w/tube
cutting fixture
TRUMPF, L3050, 2003, 2005, 2006, Linear laser, 5’x 10’
LATHES, ENGINE
12" x 40"
16"x 50"
17"x 40"
18"x 40"
18" x 60"
20"x 60"
20"x 80"
63"X 106"
"New" MORTON, F1900-AEG (2001), Single Phase
COLCHESTER, Triumph 2500 (2001), Vari speed control, 6-jax chk
ACRA, Heidenhain control
HOWA
"New" POWERTURN, 460
POWERTURN (2007), 3&4 Jaw chks, steady & Follow rests, Mint
SIRCO, PA-20, 3 & 4 jaw chks, Steady & follow rest
BOKO, D82H, Semi-Automatic Spinning lathe
LATHES, N/C & CNC
HARDINGE, Conquest 42 (1998), Live tool, 2" Big bore, Fanuc 18T
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar cap
MORI SEIKI, SL5, Fanuc 6T, 12" chuck
COLCHESTER, Storm A90 (2000), 8"chk, Fanuc 21iT, Barfeed
COLCHESTER, Tornado A90 (2004), 8"chk, Fanuc 21iTB, Barfeed
ROMI, G20 (2003), 17.3"Sw 21.2" max cut length, Fanuc 21i
OKUMA, LU15-MW (1997), Live tool, Twin turret, sub spdl., 20.87"Sw, 23.62" Turn length
MACHINING CTRS, HORZ
TOYODA, FH100 (1989), Twin Pallet
MAZAK, H500/40, X-27.9" Y-18" Z-20.7", Mazatrol M32 control
OKK, MCH800 (1985), X-79" Y-40" Z-32", 3000rpm, 50 ATC
MACHINING CTRS, VERT
HYUNDAI, SPT-V30TD (1999), Drill & Tapping, Dual Pallet
BOSTOMATIC, BD18-1 (1999), Z-17.7" Y-11.8" Z-17.7", 10,000rpm, ATC 18, CAT 20
HH ROBERTS, FLG-500 (2004), X-21.6" Y-15" Z-17.7", Anilam 6000M
DMG, DMC835V (2009), X-32" Y-20" Z-20", 3 Siemens 840D, 10k rpm, CAT40
DMG, DMC1035V (2011), X-40" Y-22.04" Z-20", Siemens 840D
Page 44
PAGE
FREJOTH, PF on X
BRIDGEPORT, DRO
New MAGNUM-CUT, VM-2V, 3hp
MAXIMART, 2VS (2002), DRO, Collets, tbl. Vise, Excellent
FIRST, LC-20VHS (1999), w/ New 3-Axes Heidenhain DRO
TOPWELL, 5VK
New MAGNUM-CUT, VM-4V, 40 Taper, 5hp
PRVOMAJSKA, DRO
MAXIMART, MX-B3IV (2008), DRO, Bed type, 40 taper
PRESSES, HYDRAULIC & AIR
300 Ton
(2005), 4-Post, Double Acting, 30"x 50" bed
PRESSES, OBI
45 Ton
80 Ton
80 Ton
80 Ton
100 Ton
150 Ton
150 Ton
150 Ton
165 Ton
TORC-PAC, 2"stk, 30-55spm, 18"x 28"bed
BROWN BOGGS, 18LGA, 6" Stk, A/C
BLOW, 6, 30-50spm, 23"x 34"bed
BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed
BLOW, 7, 30-50spm, 24"x 30"bed
BLOW, No.9, upgraded elect’s & control, A/C, 48"x 30" Bed, 10" Stk
PRODUCTION MASTER, Straight Side, 1.5"stk, 42"x 54"bed,
30-60spm
AIDA, C-frame, 7.87"stk, 15.75"SH, 25"x 48"bed, 30-45spm
AIDA, NCI-15(1) & NCI-15(2)
PRESSES, STRAIGHT SIDE
150 Ton
250 Ton
MINSTER, Piecemaker, 40"x 54" bed, 6"stk
BROWN BOGGS, SS2-250-72-39 (2000), 39"x 72" bed, 6"stk
PUNCHES, TURRET
25 Ton
33 Ton
LASERS
1500 Watt
2600 Watt
3000 Watt
3000 Watt
3500 Watt
2000 & 3500 Watt
4000 Watt
CMC, FU-2, Vert/Horz, 6.5hp
MILLS, VERTICAL
“New” TONE FAN, RD-900
GRINDERS, SURFACE, RECIPROC
6"x 12"
6" x 18"
6"x 18"
16"x 24"
16"x 40"
20"x 13’
12"x 55"
TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i
75, 130, 200, 250 Ton “NEW” ACCURPRESSES, Absolute Models, CNC
NEW
15 Ton x 4’
WYSONG, Mech, CNC, Single Axis
75 Ton x 10’
“NEW” ACCURPRESS, CNC
93 Ton x 6’5"
TRUMPF, V85 (1997), Delem DA-65 control
130 Ton x 10’
130 Ton x 12’
ACCURPRESS, 2-Axis
130 Ton x 14’
ACCURPRESS, ETS3000 (2005)
130 Ton x 14’
ACCURPRESS, Hyd, 2-axis, Light curtains
160 Ton x 18’
ALLSTEEL, Hydraulic
175 Ton x 14’
ACCURPRESS, 717514, ETS 3000, CNC crowning, Light curt.
200 Ton x 12’
250 Ton x 12’
300 Ton x 20’
ALLSTEEL, Hydraulic
775 Ton x 20’
ADIRA (2004)
FIRST, CV-410 (1999), BT40, Fanuc OM
MILLS, UNIVERSAL
TITAN, CPAF 132, Seimans 840 CNC, Retrofit 1997
33 Ton
STRIPPIT, FC1000R (1994), Fanuc Control
TRUMPF, TC500R (1996), 50"x 100", 18stn, Bosch
WIEDEMANN, C-3000 (1992), Fanuc OP, large asst of tooling, Very
good condition
AMADA, Vipros 358 King (1995), Fanuc O4P-C, 58 Stn, 4a/i
ROLLS, ANGLE BENDING
2"x 2"x 3/16"
"NEW" TAURING, SAF DS 50HV, Hydraulic
SAWS, BAND, HORIZONTAL
10"x 15"
12"x 16"
18"x 18"
"NEW" ACRA, Speeder FHBS-250V
RAM MACHINES
HYD-MECH, H18A (2001), Automatic
SAWS, BAND, VERTICAL
20" Throat
T-JAW, No.500, w/ Blade welder, Shear & Grinder
SAWS, COLD & FRICTION
11"
THOMAS, 275, Manual Cold cut saw
SHEARS, POWER SQUARING
10ga x 4’
10ga x 6’
10ga x 10’
3/16"x 8’
3/16"x 10’
1/4"x 10’
1/4"x 13’
1/4"x 16’
3/8"x 8’
3/8"x 10’
SAMPSON, Hyd.
KEETONA, Mech.
EDWARDS, Mech, Low profile
CINCINNATI (1998), Mech. Cut-To-Length line shear, 50-1/2" table
height from floor
AMADA, No.3045, Mechanical, Programmable BG
EDWARDS, No. 6.5/3000, Hyd.
AMADA, M4065, Mechanical
ACCURSHEAR, 825106, Hyd, 20hp
ACCURSHEAR (1998), Hydraulic
HACO, SST3010
TABLES, ROTARY
6.3"(160mm)HAAS, Servo (2007), w/Tailstock
12-1/4"KITIGAWA, TS320R, w/Tailstock, 3-7/8"Bore
MISCELLANEOUS
Air Dryer, PNEUMATIC, 115V/1/60
Barfeeder, SPACESAVER, 4’ SMW, Autoload 12.65
Barfeeds, LNS, Servo S2 & S3, Late models, w/Remote pendant, Excellent
Magazine Barfeeder, 4’SAMECA, MBF1000 (1998), Auto Loading
Electric Cable Reel, AERO-MOTIVE, Weatherproof
Keyseater, DAVIS, No.5, Cap. Keyway cutting 1/16" to 1-1/2"
Box & Pan Brake, 14ga x 8’CHICAGO
Wire Machinery "NEW" METALEX, WT250, Wire Nibbler
ClueJune
July,2013
2013
CLUE,
63 Maplecrete Rd.
Concord, Ontario L4K 1A5
Tel: (905) 669-7507
Fax: (905) 669-7512
www.tradermachinery.com
NEW CNC ACCURPRESSES
ABSOLUTE MODELS IN STOCK
75, 130, 200, 250 Ton
Fe a t u r e s :
•
•
•
•
•
•
•
•
•
•
•
H I G H A C C U R A C Y 0 . 0 0 0 4 R E P E ATA BI L I T Y
X & R P R E M I U M G AU G E S
M U LT I-A X I S C N C G AU G I N G O P T I O N S
CNC CROWNING
L ASE R SAF E T Y, C O M P L E T E G UA R DI N G
Q U I C K R E L E AS E C L A M P I N G O R W I L A
H Y D R AU L I C C L A M P I N G O P T I O N
D E L E M 6 6 T TO U C H S C R E E N C O N T R O L
G E N E R O U S O P E N H E I G H TS & T H R O AT DE P T H S
T H E H Y DR AU L I C S Y S T E M I S SP E C I F I C AL LY
DE S I G N E D F O R H I G H S P E E D, S Y N C H R O N I Z E D
Y 1 / Y 2 P R E SS B R AK E S
LO W- N O I S E H Y DR AU L I C S Y S T E M
C SA C O M P L I A N T
3500 & 2000 Watt, CINCINNATI, Models CL-7A,
1997 & 2002, 5’ X 10’ CNC laser
93 Ton x 6’5”, TRUMPF, No V85,
Delem DA-65 CNC control
18” x 18”, HYD-MECH, No. H18A, 2001, Automatic
Horizontal Bandsaw, PLC control, Bundling
COLCHESTER, No. Tornado A90, 2004, 8” chk.,
Fanuc 21iTB, Barfeed, CNC LATHE
WE BUY SINGLE MACHINES OR COMPLETE PLANTS
Clue July, 2013
Page 5
From Stock
NEW MACHINES
Special Pricing
HEAVY DUTY LATHES
26" x 120" x4" Bore - 16" Wide Bed
20" x 80" x 4" Bore
Also in Stock: 16", 18" & 20" Swing
All New Milling Machines
Special Package Includes
• Fagor 2-Axis DRO
• Machine Vise
• Clamping Kit
• R-8 Collet Set
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
MXB5 - 47"x 23"x 24"
Travel
7-1/2HP Inverter Head
Manual or with Fagor
3-Axis CNC
S1600 - 5'3" Arm
TF1100 - 44" Arm
TF900 - 36" Arm
TF750 - 30" Arm
BARON-MAX MACHINING CENTRE
CNC TEACH-IN LATHE WITH
FAGOR CNC CONTROL
POWERMASTER MACHINERY LTD.
1048 Matheson Blvd. E.. Mississauga, ON L4W 2V2
Tel: 905-624-9327
e-mail: [email protected]
Page
PAGE66
Fax: 905-624-8591
website: www.powermaster.ca
July, 2012
2013
CLUE,Clue
October
Clue July, 2013
Page 7
Page 8 / Steel Marketplace / JULY 2007
• APPRAISALS • FINANCING •
• TRADE-INS • TOOLING •
• SHIPPING • INSTALLATIONS •
• TRAINING • SOFTWARE •
VISIT US AT:
www.jordancraigmachinery.com
TO VIEW A COMPLETE LIST
187 TON X 127” TRUMPF 5170S 6-AXIS CNC,
CROWNING/CLAMPING, MFG:2008
Our stock number: 9699
242 Ton, AMADA, HFE2204/7,
OPERATEUR, MFG:2000
TRUMPF, L3050, 5000 WATT, SIEMENS, 5’ X 10’,
18,000 BEAM ON HOURS, MFG:2003
AMADA PULSAR 2415NT4, 4000 WATT,
Installed MAY 2007
22 Ton, AMADA, VIPROS 255,FANUC 18P,
31 STA.,3 A/I, MFG:1999 Brush Table
TRUMPF, TRULASER 3030,4000 WATT,
SIEMENS, 5’ X 10’ DUAL PALLET, MFG: 2009
TRUMPF,L3040,4000 WATT, SIEMANS, 5’ X 10’
DUAL PALLET, MFG:2006 Installed:2007
33 Ton, AMADA, VIPROS 357 QUEEN, FANUC
O4PC & PHNC, 58STA., 2 A/I, MFG:1996
27.5 Ton, TRUMPF TC500R BOSCH CNC,
18 STATION ROTATION, MFG:1999
TRUMPF L2530PLUS,3200 WATT,SIEMANS,
4’ x 8’,MFG:2003 NEW RESONATOR 2011
BYSTRONIC BYSPEED 3015, 4400 WATT,
5’ X 10’, MFG: 2009
MAZAK STX510 4000 WATT, MFG:2004
Check out our website for Photos, Specifications and a more complete inventory at
www. jordancraigmachinery.com
JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956
Tel: 845-398-0073 [email protected]
Fax: 845-398-0074 www.jordancraigmachinery.com
Page 8
Clue July, 2013
Canada Inc.
SMTCL Products
Exceed Expectations
2783 Portland Drive, Oakville, ON L6H 6M6
Tel: 905-829-1579 Fax: 905-829-8692
Clue July, 2013
Email: [email protected]
Website: www.smtcl.ca
Page 9
Bringing the Best Machine Tools
to North America
GER
Vertical Grinders
up to 100” x 30” (height)
grinding capacity;
4 Ton part weight
Made in Spain
www.germh.com
Cylindrical Grinders
up to 20’, 6 Ton between centers;
up to 40” swing
Surface
Grinders with
Rotary Table
up to 60” x 20” (height)
grinding capacity; 2.5 Ton part weight
Surface Grinders
up to 20’ x 43” x 26” (height) grinding capacity;
4.5 Ton part weight
Rebuilding Unique Machine Tools
Toshiba HBM Rebuilt by DiPaolo
6Ó spindle
100Ó “Y”
30ʼ “X”
71Ó “W + Z”
Schiess VBM
Rebuilt by DiPaolo
160Ó table
30ʼ swing
110Ó part height
7040 Fir Tree Drive, Mississauga, ON L5S1K6, Canada
Toronto Office: 905-676-9265 USA Office: 412-421-1211
www.dipaolocnc.com
Page 10
[email protected]
Clue July, 2013
USED
MACHINERY
Horizontal Lathes
“NEW”
“NEW”
MAZAK
RD&D
SAFOP
OKUMA
HITACHI
TOS
20” x 60” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4”
spindle bore, splash guard, steady rest, 2 available, stock
4038 and 4039
20” x 80” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4”
spindle bore, splash guard, steady rest, 2 available, stock
4036 and 4037
Slant Turn 40N-ATC Millcenter 1000, Fanuc Control
64" x 170", sliding bed type gap lathe, 16" hole through
spindle, GN10 CNC control, Stock No. 3849
63" x 236", C axis, live tooling on programmable turret,
Siemens 840C CNC control, Stock No. 3791
15” x 36”, LU-15 CNC Lathe, 1995, Stock No. 3580
29” swing, Turret Lathe, 6.25” hole through, Stock No. 3183
16" x 60", Model SN40, coolant tray, 4 way tool post, 350mm
4-Jaw chuck
Horizontal Boring Mills
Machining Centres
TOS
12” x 51”, Model FV 25, FAGOR CNC control, box ways,
priced to sell, Stock No. 3710
LEADWELL
20” x 30”, Model MCV-760XL, FANUC 0 CNC Control, 20
position ATC, Stock No. 3453
MISTSUBISHI
500mm pallets, Model M-H 4050, 2004, Fanuc 18iMB
Control, prepped for coolant thru spindle, 60 tool ATC, 360
degree rotary table, 40 taper, 14,000 RPM, clean machine,
Stock No. 4134
Surface & Blanchard Grinders
ARTER
SHIBAURA
TOS
Rotary Surface, Horizontal Spindle, Stock No. 3827
48”, Model No. KRT-8D, Blanchard Style, Stock No. 3684
16” x 60”, Model BRH-40B, Excellent condition. Stock No.
3465
Vertical Lathes
OLYMPIA
160mm Spindle, Model HT 140X80, CNC 6-Axis T-Type, Installed
new 2003, Fanuc 15i-MA CNC control
OKUMA & HOWA
Model ACT 2SP-V5, Twin spindle, 21.65” Max. cutting
diameter, OH-Fanuc-WL
TOS
130mm Spindle, Model WHN 13.8, 1994, Heidenhain 415 CNC,
New spindle, Stock No. 4030
BERTHIEZ
UNION
80mm Spindle, Model BFT 80/2, cleaned, cycled and
painted. Stock No. 3408
130mm Spindle, Model KHT 130, Siemens 880 CNC,
Built in CNC Facing head, 2 pallets, very rare, Stock No. 3819
63mm spindle bar, Model H63, 800mm x 890mm rotary table,
Tailstock, DRO
125mm spindle, Model Ecocut, Siemens 880 Control, 3000 RPM,
50 HP spindle, built in CNC Facing head, 2 pallets, 50” x 63”
OLYMPIA
62" table, 75" swing, Model TVM 125, 1997, Fanuc 15T, 95kw
main spindle, Live tooling, tool and part probes, very heavy
duty, Stock No. 4079
66" Table, 72" swing. Model V60L, 1999, Fanuc 180i-T, Live
tooling, 32 position ATC, Stock No. 4080
40” table, 55” swing, Model 14DKE100, updated electrics,
fresh paint
K&R
TOS
SCHARMANN
Milling Machines
HECKERT
DARBERT
KONDIA
KAO FUNG
16” x 63”, Model No. FSS 440 V1/2, Heavy Duty, Universal,
Stock No. 3686
9” x 42”, Turret Style mill, Stock No. 3458
9” x 42”, Turret Style mill, Stock No. 3457
10” x 50”, Model KF-G-450, Stock No. 3456
Cylindrical Grinders
SCHAUDT
B&S
13” x 27”, Universal Heavy Duty, Stock No. 3826
10” x 48”, Brown & Sharp, Model 1048 Microstatic, Stock
No.3825
SCHIESS
Miscellaneous
IEMCA
DANDREA
ERLO
DO-ALL
AMADA
PROGRESS
Bar feeder, 2.55" bar capacity, 3600mm bar length , Stock
No. 4066
CNC facing head
Fixed Table Single Spindle drill
Horizontal Bandsaw, Model C-916A, Stock No. 3466
Punch Grinder, Stock No. 3463
Drill Press, Stock No. 3459
100" x 180" T-Slotted Floor plate, Stock No. 4068
54.5" x 60" T- Slotted Floor Plates, (4) total, Stock No. 3775
54.5 x 96" T-Slotted Floor Plates, (1) total, Stock No. 3774
Granite Table, 150" x 150", Massive!, Stock No. 3418
Subscribe to our mailing list
OTHER SERVICES
» On-Site spindle taper grinding
» Machine tool calibration and metrology
» Mechanical, Electrical and CNC field service
» Installations and plant moves
» Spare parts including exchange programs
» Authorized distributor for Heidenhain, Fagor, Fanuc FA,
Siemens and Renishaw.
» Certified Appraiser on staff
» Way Grinding
Clue July, 2013
7040 Fir Tree Drive, Mississauga, ON L5S1K6, Canada
Toronto Office: 905-676-9265 USA Office: 412-421-1211
www.dipaolocnc.com
[email protected]
Page 11
Website: www.walkermachinery.com
MERCURY 1600
32"x67" travels
CAT 50 Taper
Coolant through
spindle
35hp main motor
2,200lbs table
capacity
Arrives July 1st,
2013
7055 Auburn Rd., Milton, ON L9T 7V9
Ph: (905) 876-0890 Fax: (905) 876-1959
Page 12
Clue July, 2013
131 Citation Dr, Units 17 & 18
VAUGHAN-CONCORD
ONTARIO, L4K 2R3
Tel: (905) 738-8730
Fax: (905) 738-5148
website:www.sabito.com
MACHINERY INC.
INDUSTRIAL MACHINE TOOLS & APPRAISALS
WE BUY & SELL SINGLE MACHINES OR COMPLETE PLANTS
BENDERS
2"
KEYSTONE, Horizontal Tube Bender
HARRISON, Alpha 400, 49"BC, 16"sw, 2"Bre, 2500rpm, Fanuc CNC
300 Ton
GOODWAY GT-25, CNC (1999)
300 Ton
ROUSELLE, 102x48, 14"stk, 31"SH, 8"adj, 35spm
TAKISAWA, TS-20, CNC
300 Ton
USI CLEARING, 16"stk, 52"SH, 20"adj, 20spm, 40hp
DANLY, SSDC, 24"stk, 39.5"SH, 20spm
WASINO, LJ-63M (1988)
3.14"
UNION, BFT 80/2
300 Ton
VERSON, 12"stk, 30"SH, 10"adj, 20spm, 60hp
NAKAMURA TOME SUPER NTX, 15.3 x 43.3" Multi Axis (2009)
4"
TOS (1995), 4-Axis DRO
350 Ton
BLISS, 16"stk, 12"adj, 38-1/2SH, 30spm, 15"bolster
OKUMA, 14.1" x 23.6" LT25 (1999), 4-Axis
5"
G & L 450 Series MC50, Fanuc CNC
500 Ton
BLISS, 12’stk, 40"SH, 25spm, 75hp
VDF, DN 820, 32"x 72", CNC
BORING MILLS, VERT
PUNCHES, TURRET
VDF, V800, 42"x 72", CNC
22.5 Ton
36"
BULLARD, VTL
70"
SUMMIT, 60 CNC VTL
MITSUBISHI, MH-50C (1989), 158 ATC
84"
KING Double Ran VTL & DRO
MITSUBISHI M-H4050 (2004) 19.9"x19.9" CNC
88"dia
STANKO, 1525, 100"sw, 70"v, 1.6-80rpm, 2 hd
MAZAK Integrex E-1060V/8II (2010)
10’ dia
NILES, F120, 128"sw, 24"stk, 6’rail hd trav, 50hp
BRAKES, PRESS
DIACRO, 16-96, CNC BG, 9"SH, 3"adj, 9"thrt, 3hp, 220v
60T x 6'
70T x 10’
WYSONG THS60-72, Hyd, Automec 300, CNC, Light Guards LEADWELL, MCV 760 XL
NIAGARA, HD-70-8-10, 102"bh, 15"SH, 7"stk, 24"BG
HERMLE, C800U (2001), 5-axis
75T x 8'
HACO PPM 2575
CHIRON, FZ08K Magnum (2007), 5-axis
75T x 10’
DIACRO, 75-10, Hydro-Mech, 3"stk, 8"adj, 12"SH, 8"thrt
DOOSAN, REVO 4020 (2006), CNC
90T x 10’
PACIFIC, J90-1, Hyd, 7"stk, 6"thrt, 6"SH, 2-Axis CNC, 15hp
110T x 10' AMADA, FBD 1030, 8-axis CNC
135T x 8’
CINCI, Series 5, 102"BH, 3"stk, 5"adj, 12"SH, 8"thrt, 30spm
DRILLS, RADIAL
3’
Radial arm drill
6’
STANKO, 2M55, w/ Box Table
1-1/2"x 48" TECHNIDRIL, Series 200 Gundrill
WIRE EDM MACHINE
AGIE CHARMILLES, Roboform 50 (1998), Ram Style
314" X 122" TOSHIBA MPC-3680 B Double Col. Bridge
(2009)
MILLS, UNIVERSAL
14"x 44"
HECKERT, FSS 440, V1/2
15.74"x 78.74"
86" X 21"
MECHANICY, FWA 41M
KIHEUNG, KMB-U6, DRO
KAO-FONG, KF-G-450
HURON, NU3
JAKOBSEN, Hydraulic
LATHES, ENGINE
18"x 84"
TOS, SUI40, 3" Bore
GEMICO, 1760
LATHES, N/C & CNC
HAAS, SL20-T, CNC (2001)
Mechanical
1/4" x 10’
VIMERCATI, SI 3006 (2004), Hydraulic
1/4" x 10’
CINCINNATI, Hyd, 36" FOPBG, v/Rake, Sq Arm, 15hp
1/4" x 10’
CINCINNATI, 2CC10, Mech, 36"FOPBG, 60spm
1/4" x 12’
NIAGARA, Hyd, 36" FOPBG, 50"sq arm, 20spm, 15hp
3/8" x 10’
CINCINNATI, 24"ROMBG, 50spm, Sq Arm, 20hp
3/8" x 10’
CINCINNATI, 1510, 42" FOPBG
CINCINNATI, 4H12, 12’sq arm, 2 front suppts, 25hp
MILLS, VERTICAL
20" x 94"
25hp
CINCINNATI, #5, X-50" Y-18" Z-16", #50, 14-1400rpm,
24" x 98"
TOS, FC63V, X-63" Y-23.62" Z-23.62", 3-Axis Heid DRO
PRESSES, GAP FRAME
45 Ton
5/8" x 8’
CINCINNATI, Mech, 48"FOMBG, 8’sq arm, 40spm
5/8"x 8’
CINCINNATI, Mech, ROMBG
5/8" x 10’
CINCINNATI, Hyd, 36"FOPBG, 18"gap, 14spm
5/8" x 12’
CINCINNATI, Hyd, 48"FOPBG, DRO, 18"gap, Power Rake
MISCELLANEOUS
BLISS, C-45, HS, 29" x 19"bed, 2-1/2"stk
Combination Punch & High Def, W.A. WHITNEY 3400 RTC 680-850
PRESSES, OBI
CMM Machine
75 Ton
MINSTER, No.7, c/w AC
250 Ton
NIAGARA, 8"stk, 22-1/2"SH, 35"x58", 35spm, A/C
320 Ton
MORI (2001), Fine Blanking Press
Turret, HITACHI SEIKI, 7D, 6-1/4"hole
SHEARS, POWER SQUARING
1/8"x 36"
CINCINNATI, 48"digital FOPBG, 18"gap, 40spm, 20hp
DARBERT, Vertical
TOS, BHR 40B (1989), Hydraulic
DOALL, 50-5200 ipm, Welder, Grinder
1/2" x 12’
9"x 42"
16"x 59"
RAM, Roll-in
36" x 13
1/2" x 12’
KARSTENS K29, Universal Cnc
BROWN & SHARP, Hydraulic
10" x 15"
CINCINNATI, 4312, Mech, 40" FOPBG, 18"throat, 50spm, 15hp
TOS, 50U (2000), Universal
8"x 24"
WDM (2008), Initial Pinch
HACO HSLX 3013 Hyd, .39"FOPBG
20" X 48"
6" x 18"
10ga x 5’
1/2" X 10'
20"x 80"
NIAGARA, L351P, IP, 4 Roll, Manual Adj & Drop,
3/8" x 12’
KONDIA, Vertical
SHIBAURA, KRT-8D
TENNSMITH, SR48P, 3"roll, Slip, 3/4hp
12ga x 4’
MILLS, TURRET
9"x 42"
GRINDERS, ROTARY
ROLLS, PLATE BENDING
16ga x 4’
MILLS, CNC / NC
TOS, BU 28/100, Universal
48"
2"x 2"x 3/16"TAURING, Alpha 40, CNC
MACHINING CTRS, UNIV
GRINDERS, CYLINDRICAL
20" x 40"
AMADA, Vipros 357, CNC, 58 stn, 2 Auto, Fanuc
DO-ALL, C-916A
HURCO C-40-U, 5 AXIS CNC (2004)
135T X 12FT ATLANTIC HD135-12-10 HYDRAULIC
175T x 14' CINCINATTI, 175CB-12FT, Hyd, Comp-u-bend 610BG
AMADA, Apelio 357 (1992), 45stn, 4-Auto, Fanuc 04PC
33 Ton
ROLLS, ANGLE BENDING
EUMACH, DVM-5030, Double Column CNC Center, X-20.4" Y-12.2"
Z-27", ATC-180
35T x 8’
AMADA, Virpos 2510 (2000), CNC
33 Ton
Feeder
IEMCA Prodigy 547, 6ft bar length.MAG CAP
15.75"(3/16"-2")
Press H&A
PRESSES, STRAIGHT SIDE
ZEISS Contura G2 Aktiv (2010)
60 Ton DAKE
Comparitor
30" Optical, JONES & LAMPSON, DRO
250 Ton
BLISS, 12"stk, 38"SH, 6"adj, 30spm, 440v
Phase Converter
RONK, X6
250 Ton
SMERAL, SSDC
Coil Line
AIDA LFG 600R, Width 2.8"-23.6".Thick.02"-.177"
APPRAISAL SERVICES
-
AMEA & USPAP CERTIFIED
CNC MACHINE TOOLS * PRESS BRAKES * SHEARS * TURRET PUNCHES * BENDING ROLLS * IRONWORKERS * NOTCHERS * BENDERS
Clue July,
2013
Page
8
Page
13
CLUE, November
2012
• High rigidity and stability
• Functional design for easy maintenance
• Short delivery time from manufacturer
• Siemens or Fanuc control systems
• Can be equipped with table positioning and rotary tool
drive
• Automatic exchange of turning tools and rotary tools
• Ram designed for efficient and precise machining
• Variable height of the working area
• Possibility to perform high-pressure through tool coolant
• Table size ranging from 2500 to 6000 mm
• Machines large and heavy workpieces
• High efficient machining
• Rigid table bearing using hydro-static guiding principles
• Precise table positioning (C-axis) and rotary tool drive
with high power output
• Siemens or Fanuc Control systems
• Can be equipped to use high-pressure coolant
Page 14
Clue July, 2013
9 P U B L I C AU C T I O N S
ONSITE &
LIVE WEBCAST!
ST
JU
Webcast powered by:
BID, BUY & GO!™
LIVE WEBCAST
Webcast powered by:
BID, BUY & GO!™
LIVE WEBCAST
9 UPCOMINg AUCTIONS IN CANAdA ANd The USA!
LATe MOdeL CNC
devLUgT MAChINe & TOOL CO.
HigH PreCisiOn & very well MAinTAined CnC
MAChININg FACILITy
D
DE
AD
COMPleTe TOOl & die sHOP
Thursday, July 25, 2013 • 10:30 A.M. EDT
5455 Outer Drive, Windsor, ON N9A 6J3
FEATURING: (2) HurOn (2001) KX10 CNC high speed bridge type VMCs; HAAs,
bruTe, deCkel, fAdAl CNC VMCs; kiTAMurA (2000) MYCENTER 2XI CNC twin
pallet VMC; leblOnd MAkinO CNC high speed VMC; niCOlAs COreA CNC HMM;
kellenberger CNC cylindrical grinder; (3) sOdiCk CNC wire EDM’s; luCAs table
type HBM; RAM-SAG/SEABERG MSP 606 CNC twin spindle VMC; HArdinge, HerCules & MOnArCH lathes; esTiMATed 200 ton hyd. spotting press; dArberT,
bridgePOrT VMMs; PArleC tool presetters; rOMer ARM co-ordinate measuring
arm. ALSO: air compressors, forklifts, CMM, deMAg crane system, welders, wood-working equipment, angle plates, tool sharpeners, raw material, tool cabinets & MuCH MOre!
D
DE
AD
T
S
wOOdwOrking
JU
COUNTRy PAST INC.
fACiliTy And sHOwrOOM
Saturday, August 17, 2013 • 11:00 A.M. EDT
2381 County Road 30, Brighton, ON K0K 1H0
New wAy MARBLe & TILe LTd.
MAssive Offering Of MArble slAbs in vAriOus
COlOrs, grAdes, THiCknesses & diMensiOns
Tuesday, August 20, 2013 • 10:30 A.M. EDT
5141 Steeles Avenue West, North York, ON M9L 1R5
Surplus Assets of
dBg wOOdSTOCk OPeRATIONS
Turning, CnC verTiCAl & sCrew MACHining,
HydrOMAT rOTAry TrAnsfer & sTAMPing fACiliTy
Mid September, 2013 • 10:30 A.M. EDT
3300 West 37th Street, Suite ‘A’, Orlando, FL 32839
FEATURING: (2) HydrOMAT HW25-12 & PRO-20 rotary transfer machines w bar feeders; u.s bAird #3 four slide; CinCinnATi centreless grinder; (2) sTAr CNC screw machines; (15+) beCHler & TrAub screw machines; (3) MiyAnO & MOri seiki CNC
turning centers; COMPleTe press department with over 5 (kOMATsu, AidA, bliss)
presses up to 110 ton & new as 1998 with variable speeds, and servo feed equipment; large
milling & grinding department, PLC controlled parts washer, forklifts, complete inspection department, manual lathes and fabricating equipment, adjustable racking, screw machine parts
& accessories, perishable tooling, welding equip, factory support, office & MuCH MOre!
FABRICATINg TeChNICS INC.
PrisTine & lATe MOdel CnC
CusTOM fAbriCATing fACiliTy
Tuesday, September 24, 2013 • 10:30 A.M. EDT
251 Simpson Avenue, Bowmanville, ON L1C 2J2
FEATURING: STRIPPIT lvd (2008) ORION 3015 PLUS CNC 4000 watt 5’x10’ laser w/
robotic load/unload station; sTriPPiT lvd PREB/90/08, 90 ton x 8’, 8 axis CNC hydraulic
press brake; AllsTeel hydraulic press brake with CNC back gauge; sTriPPiT CNC turret punch; HurCO (2012 LIKE NEW) VM10 CNC high speed VMC; dArberT hydraulic
shear; HAeger insertion press w/ bowl feeder; virTek (2000) laser parts scanner; (3) QAir downdraft tables; Heli FG60, 5500LB LPG forklift. ALSO: air compressors, lrg qTy
of Miller digital welders, tool room lathes, drill presses, VMMs, press brake dies & die
racks, single station punches, grinders, lrg qty of fabricating support equipment, power tools
& factory support equipment, tool cabinets, punch & die tooling, office furniture & MOre!
lArge PrOduCTiOn sTAMPing,
fAbriCATing & MACHining fACiliTy
Thursday, August 22, 2013 • 10:30 A.M. EDT
980 Juliana Drive, Woodstock, ON N4V 1B9
ART ReCheRCheS eT
TeChNOLOgIeS AvANCéeS INC.
INdUSTRIeS NORMeT INC.
lArgesT PHOTOniCs And iMAging evenT in nOrTH AMeriCA! THOusAnds
Of MOsTly new iTeMs TO be sOld! All assets have been immaculately maintained,
and are in pristine condition. This is a unique opportunity to acquire assets at a used price
with replacements costs in the millions. Please check our website for a completed detailed
listing of items available, and mark your calendars for this sale!
FEATURING: AIM (2007) AFM-3D CNC wire former; CinCinnATi hydraulic shears;
rOundO Ab PS255 10’ x 1/2” hydraulic plate roll; niAgArA & ACCurPress 175
ton hydraulic press brakes; (4) CleAring & rAdAelli straight side presses; CrAig
& dOnAld 250 ton press; brOwn & bOggs 150 ton press; (3) MOTOMAn 6 axis
welding robots; nArdini & nuwAy lathes; kAwAsAki horizontal plastic injection molder
(2) CAnAdiAn CrAne 10 ton x 50’ bridge cranes; fOrd L8000 shunt truck; CrOwn
high reach electric truck; HysTer forklifts; SKYJACK man lift. Huge AssOrTMenT Of
PRESS DIES TO BE SOLD! ALSO: air compressors, milling machines, air dryers, welders, saws, granulators, raw material, lisTA cabinets, carts, office furniture & MuCH MOre!
HeAvy MACHining, Turning, bOring & geAr
fACiliTy serviCing THe Mining indusTries
Tuesday, August 27, 2013 • 10:30 A.M. EDT
154 Maltais, Sept-Îles, QC G4R 3K1
Assets of
MAssive Offering Of PHOTOniCs, OPTiCAl
iMAging And sCienTifiC lAb equiPMenT
wiTH rePlACeMenT COsTs in THe MilliOns!
Thursday, September 26, 2013 • 10:30 A.M. EDT
2300, boul. Alfred-Nobel, Dorval, QC H4S 2A4
FEATURING: VDF VM1250-NC, 52” x 163” heavy capacity CNC lathe; legOr, niles
& wMw niles heavy capacity engine lathes; CinCinnATi gilberT 5” floor type HBM;
(2) TOs table type HBMs; wMw 52” swing horizontal gear hobber; wMw HeCkerT horizontal gear hobber & thread miller; MAAg PH100 lead & involute gear checker; HAvlik
gear hobber; HAvlik 40” slotter; ingersOll 30” x 168” planer mill; lArge MACHining dePArTMenT consisting of mills, lathes, drills, saws, grinders & more! Huge AssOrTMenT of large capacity gear shapers, grinders, thread rollers, change gears, steady
rests, machine tool accessories & attachments, & tooling. AlsO: radial arm drills, heat treat
furnaces, factory equipment & spare machine parts, welders, forklifts & MuCH MOre!
www.corpassets.com • 416.962.9600
Clue July, 2013
Page 15
Latest Installation by FERRIC-WESTSIDE Machinery
Power Bend Pro 3760x175 press brake & HGD 3100 x 6 shear
at Teamworks Fabrication Ltd. in Bentley, AB
Albert P Talsma, owner of Team Works
Fabricaction Ltd. Choose for the FERRIC – ERMAK
products to upgrade his fabrication shop to get a
faster turn a round of project in his shop.
The HGD 3100x6 shear is equipped with a
Cybtouch control and pneumatic sheet support
system allowing to cut gauge materials without
holding it up on the back of the shear.
The Power Bend Pro 12ft x 193 press brake
equipped with two axis (XR) back gauge,
crowning table and ER70 2D graphic control
allows precise and fast bending from the first
bend.
For more information on Team Works Fabrication
Ltd., contact Albert: [email protected]
All FERRIC-WESTSIDE products are sold with installation and training and local
service by our FERRIC service team
For more information on the FERRIC-ERMAK products
Westside Service Ltd.
w w w.ferricmachinery.com
4406 58th St S, Lethbridge, AB
FERRIC Machinery Inc.
3980 Chadburn Cres, Mississauga, ON
Website: www.walkermachinery.com
BORING MILLS, CNC, HORZ, FLOOR
UNION (BFP 130 CNC) 5.12" (1994) 120"x 275", ISO 16 rotary table, floor plates, Heidenhain ctrl
UNION (BFT 90/3) 4" (1988) 49"x 63" travels, 49"x 55" rotary table, 50 taper spindle, 3-axis DRO, new paint
TOS (W100A) 4" (1994) 49"x 63"x 63" trvls, 50"x 50" rotary table, 50 taper spindle, 3-axis Heidenhain DRO
TIGERCUT (110 CNC) 4.3" 63”x 86” travels, Fanuc 31i control, new 2012
TOS (W100A) (2013) Remanufactured, 50 tpr spindle, factory rebuilt to new tolerance, 5-axis Heidenhain DRO
TOS (W100A) (1991) 49"x63"x63" travels, 50tpr, 4-axis DRO, TAILSTOCK, nice!
UNION (BFT 110 CNC) 60"x 80" travels Heidenhain 155 control, built in rotary, new 1988
TOSHIBA (BTD 110 ER16) 78" cross travel (1992) ATC, Tosnuc CNC control
DRILLS, RADIAL
SOROLUCE (TR-1600) 2.5" cap 5’ drill, very nice runner
MAS (VR 8A x 2500) 3" cap
HONES
“NEW” HARTFORD (HCMC 1682) 30"x 60" (2013) 50 taper, CTS, Chip conveyor, Fanuc control
FADAL (2040) New 2000, 40 taper, 10,000rpm spindle
DMG (DMU 50T) New 2004, 3+2 axis, Heidenhain i530 control
HARTFORD (PRO 4150) 60"x 157" 50 taper, 10,000 DDS, Fanuc, new 2012
MILLS, TURRET
DECKEL (FP3) w/ numerous attachments. Very nice!
KONDIA (FV-1) 10"x 50" 40 taper, power feed, riser block, 2-axis DRO
MISCELLANEOUS
Forklift ,YALE, 5000lbs 3 stage mass, side shift
50 plastic automotive skids, 45"x48" pallet, - 4 way pick up
Cast Iron Floor Plates, 138" x 78" x 14", 2 Available
Portable Drilling unit, CLIMAX (KM 3000)
Rotary Table, TOS, (ISO 16) 86"x 86" 60" Travel, 17 Ton, Rotary & Linear DRO
SUNNEN (MBB-1800) w/ Sunnen tooling and tooling cabinet
LATHES, ENGINE
RIVOL 14"x 40" chucks, steadies, 4-way tool post
MARTIN 20"x 80"
ENTERPRISE 20"x 120"
TOS (SN 63 C) 26"x 120" 2-Axis DRO, new 1998
POREBA (TCG 160) 63"x 393" As New!
STANKO (K3TC) 84"x 393" (1977) 4-bed way design, 50 ton capacity, new electrics
LATHES, N/C & CNC
KITAKO 4 spindle vertical, new 2004, Fanuc control
NIIGATA (HN 80 FC) 32"x 32" pallets Fanuc 11m control, 6 pallet pool, built in facing head and in/out spindle
movement for boring mill applications, 120 ATC, new 1992
1998 TOS
SN 63 C x 120”
Lathe
7055 Auburn Rd., Milton, ON L9T 7V9
Ph: (905) 876-0890 Fax: (905) 876-1959
Page 16
Clue July, 2013
4 Littleleaf Crescent, Markham, ON L3S 4E9
Phone: 905-201-7841
Fax: 905-201-7842
[email protected]
www.haydenleemachinery.ca
Your Exclusive ACCURPRESS Dealer
CNC MODELS IN STOCK
40 - 2000 TON
Fe a t u r e s :
•
•
•
•
•
•
•
•
H I G H A C C U R A C Y 0 . 0 0 0 4 R E P E ATA BI L I T Y
X & R P R E M I U M G AU G E S
M U LT I-A X I S C N C G AU G I N G O P T I O N S
CNC CROWNING
L ASE R SAF E T Y
C O M P L E T E G UA R DI N G
Q U I C K R E L E AS E C L A M P I N G
G E N E R O U S O P E N H E I G H TS & T H R O AT
DE P T H S
• T H E H Y DR AU L I C S Y S T E M I S SP E C I F I C AL LY
DE S I G N E D F O R H I G H S P E E D, S Y N C H R O N I Z E D Y 1 / Y 2 P R E SS B R A K E S
• LO W- N O I S E H Y DR AU L I C S Y S T E M
• C SA C O M P L I A N T
F U L L C N C C O N T R O L L E R S W I T H FA S T A N D E A S Y S E T U P S
BA S E D O N T H E L AT E S T T E C H N O L O GY
Dealer for:
Boschert Precision Notchers, Machines & Parts.
THE REVOLUTIONARY NEW
ACCURPRESS VISION CONTROL
» Dynamic Part Stretch-out
» Interactive Ram and
Backguage Control
» Locking Critical Flanges with
Bending Guru
» Wireless Control of all Axis
» Speed from Start to first
accurate part of all Axis
» Automatic Tool Selection and
Bend Sequencing
» Crystal Ball Technology
TOOLING THAT PROVIDES ACCURACY,
SPEED, FLEXIBILITY, DURABILITY
“We Service What We Sell”
Clue July, 2013
Page 17
A2450 AIR COMPRESSORS
B7000 BRAKES, PRESS
CLASSIFIED -
LISTING YOUR MACHINERY AND EQUIPMENT TODAY
LEADS TO SUCCESSFUL SALES TOMORROW
Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222
2 – PLASMA TORCHES
MODEL: HT4400
Automatic Torch Ignition
8” Motorized vertical travel
Both in Good Condition
Includes $10K worth of parts/consumables
Package for:
$20,000
Contact Cameron Steel
@ 705-878-0544 ext 258
www.cameronsteel.com
A2450 AIR COMPRESSORS
5hp DEVILBISS, , Two Stage Hd, 80 Gallon Horizontal Tank, 575V,
$1,150, (Stevens Machinery Sales (2005) Inc Tel: 416-798-3611,
Fax: 416-798-8439) See Page 2
5hp CAMPBELL HAUSFELD, , 60 Gallon Vertical Tank, 230 Volt,
$450, (Stevens Machinery Sales (2005) Inc Tel: 416-798-3611,
Fax: 416-798-8439) See Page 2
25hp RANGER, , 240 Gallon Horz Tank, 3-V Head, 85 CFM, 550v,
Fax: 416-798-8439) See Page 2
B5400 BORING MILLS, HORZ, FLOOR
5" UNION, BFP130 CNC, X-180" Y-98" Z-39" W-14", c/w Heidenhain
TNC 425 4-Axis, (Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
B5500 BORING MILLS, HORZ, TABLE
4" STANKO, , Rotary Table, ISO 50, 3-Axis DRO, (Boulanger
Machinerie Inc Tel: 418-428-4709, Fax: 418-428-4710)
4" TOS, W-100A, (Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
4.33" TOSHIBA, BTD11-ER16, X-78.74" Y-59" W (Saddle)-78.74",
Tosnuc 777, 4-Axis, B-axis Rotary tbl, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
5" LAZZATI, , Table type, X-96" Y-72", 48"x 100" table, 1500rpm,
(Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
5" UNION, BFT 125/5 (1976), 71"x 79", XYZ-100"x 79"x 71", Rot tbl,
fcg hd, mlg hd, Ref# 2376, (B F G Machine Tools Inc.
Tel: 780-434-7795, Fax: 780-436-0717)
B6968 BOX & PAN
14ga x 4’ CHICAGO, W31, Heavy duty, Floor model, $2,950,
(Stevens Machinery Sales (2005) Inc Tel: 416-798-3611,
Fax: 416-798-8439) See Page 2
B7000 BRAKES, PRESS
15 Ton x 4’ WYSONG, , Mech, CNC, Single Axis, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
17 Ton TRI-ACRO, 17-4 (1993), Hurco 7, Ref# 9592, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 8
25 Ton x 34" CONE (New), , 3 Axis CNC, Laser, Electric
Servo-Drive, In stock, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
38.5 Ton AMADA, RG35S (1990), NC9EXII, Ref# 9731, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 8
38.5 Ton AMADA, RG35S (2000), NC9EXII, Ref# 9622, (Jordan
See Page 8
48 Ton x 63" CONE (New), , 5 Axis CNC, Laser, Electric
Servo-Drive, P.O.R, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
55 Ton AMADA, FBD5020 (1989), NC9EX 3-Axis CNC, 78.74" O.A,
Ref# 9719, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
55 Ton AMADA, RG50 (1988), Autogauge 99 Back gauge, Ref#
9134, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
60 Ton ACCURPRESS, 7606 (2005), Advantage package,
ETS-3000 CNC, Ref# 9658, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
70 Ton x 10’ ALLSTEEL, , Hyd, Bottom Die Holder, 20 Hp, 550 Volt,
Fax: 416-798-8439) See Page 2
75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
88 Ton AMADA, HFE8025 (1999), Operateur 7-Axis, Ref# 9597,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
FABTEC Machine Tool Solutions Inc.
790 Redwood Square, Unit #13 * Oakville, Ontario * L6L 6N3 website: www.fabtec.ca
Phone: (905) 469-1586 * Fax: (905) 469-3054 Toll Free 1-877-FABTEC-2 (1-877-322-8322)
PORTABLE MAGNETIC DRILLING SYSTEMS
MUSTANG 130
$1195
Free set of 6 cutters
with machine
For "Extra Tough" cutting, this system offers the
ultimate in price and performance. At 26 pounds,
this system is lightweight and compact. Mounts
a twist drill up to ½"., The drilling system
features a complete coolant system and roller
bearing arbor support to extend cutter life.
Handles mount on either side of system for
greater flexibility.
Specifications Mustang 130
Annular cutter range: 7/16" - 1 ½"
Annular cutter depth range:0" - 2"
Twist drill capacity: *½"
Weight 26 lbs
Height: 15"
Voltage: 110v A© only, 10 amps,
1200 watts, earth ground and
Accepting annular cutters 1-1/2"
double insulation, Frequency: 50 diameter x 2" depth.
60 Hz
Twist drills up to ½" diameter.
550 RPM No Load
Full range of annular cutters in stock Magnetic holding deadlift: 2,200 lbs
Priced for today's market
* with chuck and adaptor optional
PAGE
18
Page 18
88 Ton AMADA, RG80 (1989), NC 9EXII 3-Axis, Installed New:1990,
Fax: 845-398-0074) See Page 8
88 Ton AMADA, FBDIII8025NT (2001), Amada AMNC-PC, Ref#
Fax: 845-398-0074) See Page 8
88 Ton x 8’-6" “NEW” FERRIC, Power Bend 2600-80, 3-axis,
CZ-142-04 compliant, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
88 Ton x 98.6" AMADA, FBD8025 (1989), Up-Acting, NC9EXII,
3-Axis CNC BG, Ref# 9761, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
88 Ton x 98.6" AMADA, FBD8025 (1992), Up-Acting, NC9EXII,
3-Axis CNC BG, Ref# 9762, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
90 Ton PACIFIC, J-90-8 (1989), Automec CNC 1000, 2-axis, Ref#
Fax: 845-398-0074) See Page 8
90 Ton CINCINNATI, 90CBII6 (1997), Cincinnati 2-axis, Ref# 9638,
Fax: 845-398-0074) See Page 8
93 Ton x 6’5" TRUMPF, V85 (1997), Delem DA-65 control, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
95 Ton TRUMPF, Trumabend V85S (2005), 6-axis Delem, Ref#
Fax: 845-398-0074) See Page 8
110 Ton AMADA, RG100 (1997), NC9EXII 3-Axis BG, Ref# 9730,
Fax: 845-398-0074) See Page 8
110 Ton AMADA, RG100 (1985), NC9EX 3-Axis BG, Ref# 9718,
Fax: 845-398-0074) See Page 8
110 Ton AMADA, HFB 1003 (1998), Operateur Multi-Axis, Ref#
Fax: 845-398-0074) See Page 8
110 Ton x 10’-8’6" DURMA, (2001), X-R Backgauge, DA65 control,
(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
110 Ton x 10’ LA-G (New), , CNC, 4-6 axis, Laser, Hyd., 575V - Fast
Dlvy, (Stevens Machinery Sales (2005) Inc Tel: 416-798-3611,
Fax: 416-798-8439) See Page 2
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
130 Ton x 12’ ACCURPRESS, , 2-Axis, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
130 Ton x 14’ ACCURPRESS, , Hyd, 2-axis, Light curtains, (Trader
See Page 4
Fax: 416-798-8439) See Page 2
137 Ton AMADA, HFB1254/5, Operateur CNC, 165", New:1996,
Fax: 845-398-0074) See Page 8
138 Ton AMADA, FBD1253NT (2004), Up-Acting CNC, Ref# 9739,
Fax: 845-398-0074) See Page 8
143 Ton AMADA, HDS-1303NT (2004), AMNC-PC 8-Axis, Ref#
Fax: 845-398-0074) See Page 8
151 Ton SALVAGNINI, CPR135-3000 (2003), Roboformer Bending
Cell, Ref# 9521, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
176 Ton x 10’-8’4" “NEW” FERRIC, Power Bend 3100x160, 3-Axis,
CZ142-04 Compliant, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
176 Ton x 12’-10’ “NEW” FERRIC, Power Bend 3600-160, 3-axis,
Fax: 905-820-3234) See Page 1
187 Ton x 127" TRUMPF, 5170S (2008), 6-axis CNC,
Crowning/Clamping, Ref# 9699, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
Fax: 416-798-8439) See Page 2
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
220 Ton x 12’-10’ “NEW” FERRIC, Power Bend 3600-250, 3-axis,
Fax: 905-820-3234) See Page 1
CLUE,
July 2013
Clue July,
2013
B7000 BRAKES, PRESS
D0654 DEBURRING MACHINES
FALLS, Sheet/Edge Deburrer, #99, 1 Head, Bench Model, 110V, $1,
500, (Stevens Machinery Sales (2005) Inc Tel: 416-798-3611,
Fax: 416-798-8439) See Page 2
FALLS, Sheet/Edge Deburrer, #121, 2 heads, Floor model, 110V, $4,
Fax: 416-798-8439) See Page 2
37" Wide CEMCO, , Dry,Scotchbrite Drum,Turns & Osc, 575 V,
DEMO, $19,500, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
37" Wide MIDWEST SANDRIGHT (New), , 1 Belt Head, 20 HP,575
Volt-In Stock, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
37" Wide TIMESAVER, , 1 HD, Wet, Abrasive Belt, Dryer, AS-IS, $5,
Fax: 416-798-8439) See Page 2
D4530 DRILLS, GEARED HEAD
IBARMIA, , #3MT, Pwr fds, 19"x 15"table, Coolant, 1-1/2hp, 550V,
Fax: 416-798-8439) See Page 2
IMA, , #3MT, 19"x 14"table, 2250rpm, 1.5hp, 550V, $3,950, (Stevens
Machinery Sales (2005) Inc Tel: 416-798-3611,
Fax: 416-798-8439) See Page 2
D7000 DRILLS, MISCELLANEOUS
CLAUSING, , 4-Spindle drill press, Table 19"x 60", variable speeds,
Fax: 418-428-4710)
CLAUSING, , 1-1/4" variable speed, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
D8300 DUST COLLECTORS
UNITED AIR SPECIALISTS, FJL6-7.5-2H55, DustHog filtration Unit,
Fax: 845-398-0074) See Page 8
RAND-BRIGHT, Wet, 2800 CFM, Stainless Steel, 10 Hp, 575 Volt,
Fax: 416-798-8439) See Page 2
E2400 ELECTRIC DISCHARGE MACHINES
(Die Sinker) MAXIMART, SM-500 (2004), 3-Axis, Model V45-100,
(Machinerie Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
See Page 23
F5006 FURNACES
Heat Treating , New & Reconditioned, Powered by Electric, Gas, Oil,
Propane, for all purposes, (Park Thermal International
Tel: 905-877-5254, Fax: 905-877-6205)
G4706 GRINDERS, CYLINDRICAL
8"x 22" SHIGIYA, , OD/ID, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
11"x 40" JUNKER TOS, BUAJ28/1000, Mint, (Powermaster
Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)
See Page 6
G8025 GRINDERS, SURFACE, RECIPROC
HARIG, 612, Manual Ballway grinder, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
6"x 12" CHEVALIER, , Manual Feeds, 1 Hp Motor, 575 Volt, $2,950,
Fax: 416-798-8439) See Page 2
Cap 12 x 30" BLOHM, Hanset 7, Auto cycle, (Machinerie Gilles
Lupien Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
16"x 24" DARBERT, (1998), Auto. Downfeed, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
CLUE,
July 2013
2013
Clue July,
L0850 LASERS
Do You Know Of Surplus Machinery
For Sale Or A Potential Plant Closure?
We Pay Cash For Your Single Machine,
Entire Plant and Deal Leads
Platinum specializes in appraising, selling and financing industrial
manufacturing machinery and inventory. We provide creative and
personalized asset management solutions to our clients. With
offices throughout North America, we can assist you with all of
your asset management needs. Call us today!
pr
ai
se
rs
Auctions
Appraisals
Financing
Succession Planning
Advisory Services
Asset Storage
and Remarketing
Asset Audits
and Tagging
Auctioneers
Ap
242 Ton AMADA, HFE2204/7 (2006), Operateur, Ref# 9604, (Jordan
See Page 8
250 Ton x 8’ WYSONG, , 2-Axis Automec, safety lights, Bolster,
Tools, 550V, $49,500, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
250 Ton x 12’ ACCURPRESS, 725012 (1993), w/Hurco 5C 2-Axis
BG, Ref# 9746, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
Fax: 416-798-8439) See Page 2
300 Ton x 20’ ALLSTEEL, , Hydraulic, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
Fax: 416-798-8439) See Page 2
440 Ton x 20’ DURMA, Delem CNC (2006), Ref# 9671, (Jordan
See Page 8
500 Ton x 20’ PACIFIC, K500-20 (1974), Ref# 9560, (Jordan Craig
See Page 8
Financiers
www.platinumassets.com • 416.366.2326
16"x 40" CHEVALIER, FSG-1640ADII (2003), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
G9030 GRINDERS, MISCELLANEOUS
Angle Belt HM TAS 150, , 6"wide x 79"belt, 5hp, 550V, $1,950,
Fax: 416-798-8439) See Page 2
10"x 16" HAUSER, , Jig grinder with DRO, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
I4775 PRESSES, INSERTION
6 Ton (NEW )PEMSERTER, #4-L, 12"Th, Pneumatic, Bench, Finger
safety, Laser pointer, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
6 Ton HAEGER, HP-6-B, 12"Th, 1-1/2hp, 230/460V, $4,500,
Fax: 416-798-8439) See Page 2
8 Ton (NEW )PEMSERTER, #2000, 24"Th, High speed,
Manual/Auto, PLC control, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
8 Ton (NEW )PEMSERTER, #3000, 24"Th, Servo-Drive,
Manual/Auto, PLC control, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
I6200 IRONWORKERS
50 Ton FERRIC, , Single Operator, 5 Stations, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
60 Ton KINGSLAND, 60-S, w/Tooling, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
65 Ton FERRIC, , Single Operator, 5 Stations, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
80 Ton FERRIC, , Dual Operator, 5 Stations, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
KINGSLAND, Shark 50, 5"x 5" 3/8" Angle, 1-1/2" in 3/8" Punch,
10hp, 575v, $8,250, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
K3004 KEYSEATERS
DAVIS, No.5, Cap. Keyway cutting 1/16" to 1-1/2", (Trader Machinery
L0850 LASERS
MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720, (Jordan
See Page 8
1500 Watt MAZAK, STX 48 MKII (2004), Ref# 9717, (Jordan Craig
See Page 8
1500 Watt MAZAK, STX510 (1999), 5’ x 10’, Approx. 70,00hrs,
Mazak Refurb 2010, Ref# 9230, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
2000 Watt TRUMPF, L2030 (2007), integrated load/unload
automation, Ref# 9589, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
2200 Watt BYSTRONIC, Byvention 3015 (2006), Ref# 9124, (Jordan
See Page 8
2500 Watt BALLIU, CF1500 (2000), 5’x 10’, 8000hrs, Ref# 9156,
Fax: 845-398-0074) See Page 8
2500 Watt CINCINNATI, CL-6 (2006), 5’x 10’ Dual Pallet, Fanuc
C2000, Chiller, Ref# 9757, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
2500 Watt AMADA, Pulsar LC2415NT (2008), Ref# 9045, (Jordan
See Page 8
3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483 Beam on
hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
3000 Watt TRUMPF, L2530 (2001), 4’x 8’, Siemans, 3205 Beam on
hours, Ref# 9734, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
3200 Watt TRUMPF, L2530Plus (2003), Siemens, 4’x 8’, New
Resonator 2011, Ref# 9708, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
3200 Watt TRUMPF, L2530 (2000), 4’x 8’, Siemans, Ref# 9733,
Fax: 845-398-0074) See Page 8
2000 & 3500 Watt CINCINNATI, CL-7A, 5’x 10’, 1997/2002, Fanuc
16M & PC based, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
4000 Watt AMADA, Gemini FO-3015NT (2007), 5’x 10’, Ref# 9579,
Fax: 845-398-0074) See Page 8
4000 Watt BYSTRONIC, Bystar-3015-2 (2001), 5’x 10’, Ref# 9653,
Fax: 845-398-0074) See Page 8
4000 Watt MAZAK, STX510 (2005), Ref# 9663, (Jordan Craig
See Page 8
4000 Watt MAZAK, STX510 (2004), Ref# 9692, (Jordan Craig
See Page 8
4000 Watt TRUMPF, L3040 (2006), Siemans, 5’x 10’ Dual pallet,
installed 2007, Ref# 9670, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt AMADA, LC3015F1NT (2008), 5’x 10’, Ref# 9756,
Fax: 845-398-0074) See Page 8
4000 Watt CINCINNATI, CL-7A (2006), 5’x 10’ Dual Pallet, Cinci PC
control, Ref# 9758, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt TRUMPF, Trulaser 3030 (2009), Siemens, 5’x 10’ Dual
Pallet, Ref# 9763, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt AMADA, Pulsar 1212NT (2007), Installed 2008, extremely
low hrs, Ref# 8756, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt AMADA, Pulsar 2415NT4, Installed May 2007, Ref#
Fax: 845-398-0074) See Page 8
4000 Watt AMADA, Gemini FO4020NT (2005), 6’x 12’, Approx. 25,
000hrs, Ref# 9474, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt TRUMPF, L4030 (2002), Siemans, 80"x 160", Ref# 9726,
Fax: 845-398-0074) See Page 8
PAGE
Page 19
19
L0850 LASERS
4000 Watt TRUMPF, L6030 (2000), 15,850 Laser on hours(current
resonator), Ref# 9727, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008, Less
than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4400 Watt BYSTRONIC, Byspeed 3015 (2009), 5’x 10’, Ref# 9748,
Fax: 845-398-0074) See Page 8
5000 Watt TRUMPF, L3050 (2003), Siemens, 5’x 10’, 40,000hrs,
Fax: 845-398-0074) See Page 8
6000 Watt TANAKA, LMX V30-TF6000B (2003), 10’x 30’, Fanuc
16IL, Ref# 9528, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720, (Jordan
See Page 8
L3000 LATHES, ENGINE
COLCHESTER &
POREBA Lathe Parts
Available
for most
Models
Genuine, Guaranteed to fit
and competitively priced.
Hove Machine Services
12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3 & 4
jaw chucks, collets., (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
15"x 50" COLCHESTER, Triumph 2000, c/w DRO, (Powermaster
Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)
See Page 6
16"x 50" COLCHESTER, Triumph 2500 (2001), Vari speed control,
6-jax chk, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
17"x 40" ACRA, , Heidenhain control, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
18"x 40" HOWA, , (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
18"x 40" TOS, , 2000rpm, Geared, Camlock spindle, 575V, $4,950,
Fax: 416-798-8439) See Page 2
18" x 60" “New” POWERTURN, 460, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
20"x 60" SOFIA, , (Powermaster Machinery Ltd Tel: 905-624-9327,
Fax: 905-624-8591) See Page 6
20"x 80" SIRCO, PA-20, 3 & 4 jaw chks, Steady & follow rest,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
21"x 60" ACRATURN, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
21"x 60" ACRA, , Turn lathe 3-1/8" bore, (Powermaster Machinery
Ltd Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
22"x 120" TARNOW, , DRO, Mint, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
23"x 80" VDF, E3H (1976), 14"OCS, 3-1/8"sp bore, 15hp. taper,
Ref# 2033, (B F G Machine Tools Inc. Tel: 780-434-7795,
Fax: 780-436-0717)
63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe, (Trader
See Page 4
90"x 33’cc CRAVEN, , c/w 2 carriages, 60hp, Cap. 50 ton,
Fax: 418-428-4710)
L6135 LATHES, N/C & CNC
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar
cap, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
MORI SEIKI, SL5, Fanuc 6T, 12" chuck, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over Bed 20",
Mint cond., (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 23
16"x 40" MICROWEILY, TY-1540D (2007), Teach-Turn CNC
toolroom, Fagor 8055TC, 7-1/2" 3 jaw chk, V8 hyd turret, Ref#
2331, (B F G Machine Tools Inc. Tel: 780-434-7795,
Fax: 780-436-0717)
OKUMA, LU15-MW (1997), Live tool, Twin turret, sub spdl.,
20.87"Sw, 23.62" Turn length, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
PAGE
20
Page 20
M2075 MILLS, PLANER TYPE
ADVERTISERS DIRECTORY
COMPANY
PHONE
FAX
PAGE
Alberta
B F G Machine Tools Inc., Edmonton (Brian).................................................780-434-7795 ............780-436-0717 ............18
British Columbia
ECCO Machinery, Surrey (Larry) ..................................................................877-513-1773 ............778-298-2024 ............18
Modern Tool (BC) Ltd, Port Coquitlam (Pam)................................................604-472-1444 ............604-472-1455 ............24
Manitoba
Empire Machinery & Tools, Winnipeg (Rick) .................................................800-665-8089 ............204-779-7796 ..............7
Ontario
Brighton Machinery Sales Inc, Ingersoll (Brian) ............................................519-485-7089 ............519-485-7368 ............18
Cameron Steel, Lindsay (Bob)......................................................................705-878-0544 ............705-878-0560 ............18
Corporate Assets Inc, Toronto (Marketing)....................................................416-962-9600 ............416-962-9601 ............15
Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ..........................................905-676-9265................................................10
Fabtec Machine Tool Solutions Inc, Oakville (Raj) .........................................905-469-1586 ............905-469-3054 ............18
Ferric Machinery Inc, Mississauga (Koen) ....................................................877-337-7424 ............905-820-3234 ..............1
Havlik Int’l Machinery, Cambridge (John)......................................................519-624-6240 ............519-624-4119 ............14
Infinity Assets Solutions, Concord (Leslie)....................................................905-669-8893 ............905-669-7512 ............30
J&R Service & Sales Ltd., Markham (Hayden)..............................................905-201-7841 ............905-201-7842 ............17
L S Walker Machine Tools Inc, Milton (Chris)................................................905-876-0890 ............905-876-1959 ............12
Machine Solutions Inc., Guelph (Andrew) .....................................................416-220-5910..................................................7
Micro Trend Robotics Inc, Pickering (Peter) ..................................................905-509-1218 ............905-509-2687 ............18
Natex Tools Inc., Mississauga (Alex) ............................................................905-564-0079 ............866-386-3281 ............31
Park Thermal International, Georgetown (Sales) ...........................................905-877-5254 ............905-877-6205 ............18
Paul Machinery, Burlington (Paul).................................................................905-634-8442 ............905-681-6940 ............25
Phase Quest, Mississauga (Harold)..............................................................416-578-5399 ............416-753-7209 ............18
Platinum Asset Services Inc., Toronto (Adam) ..............................................416-366-2326 ............416-366-2325 ............19
Powermaster Machinery Ltd, Mississauga (Peter) ........................................905-624-9327 ............905-624-8591 ..............6
S K Braly Machinery Inc, Mississauga (Steve)..............................................905-793-8080 ............905-793-2190 ............23
SMTCL Canada Inc., Oakville (Merry)...........................................................905-829-1579 ............905-829-8692 ..............9
Sabito Machinery Inc, Vaughan/Concord (David)..........................................905-738-8730 ............905-738-5148 ............29
Stevens Machinery Sales (2005) Inc, Toronto (Andrew) ...............................416-798-3611 ............416-798-8439 ..............2
TCL Asset Group Inc, Toronto (Norm) ..........................................................416-736-1367 ............416-736-4159 ............21
Trader Machinery Inc, Concord (Jonathan) ...................................................905-669-7507 ............905-669-7512 ..............4
Quebec
Boulanger Machinerie Inc, St-Ferdinand (Ben) ..............................................418-428-4709 ............418-428-4710 ............18
Machinerie Gilles Lupien, Drummondville (Gilles) .........................................819-478-5266 ............819-478-5266 ............23
Machinery S. Tremblay, Drummondville (Sylvain) .........................................819-477-6677 ............819-477-6466 ............24
Seguin Machinery Ltd, Vaudreuil-Dorion (Noel) ............................................514-935-3531 ............514-932-4459 ..............3
Stock Machine Tools Co, Laval (Andre) ........................................................514-326-7006 ............514-329-2599 ............18
USA
Jordan Craig Machinery Int’l Inc, New City (Jordan) .....................................845-398-0073 ............845-398-0074 ..............8
Y.Franke & Company, LLC., Hoffman Estates (York) ......................................847-874-8972 ............847-596-8006 ............32
M0130 MACHINING CTRS, HORZ
OKK, MCH800 (1985), X-79" Y-40" Z-32", 3000rpm, 50 ATC, (Trader
See Page 4
M0185 MACHINING CTRS, VERT
BOSTOMATIC, BD18-1 (1999), Z-17.7" Y-11.8" Z-17.7", 10,000rpm,
ATC 18, CAT 20, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
20"x 45" MAZAK, V-10 (1989), X-30" Y-20" Z-20", Mazatrol M-32,
spdl tpr #40, (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 23
FADAL, Fadal 88 HS (1997), X-40" Y-20" Z-20", 10,000rpm, 22hp,
21ATC, (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 23
CINCINNATI, Arrow 1000 (1997), Acramatic 2100, X-40" Y-20" Z-20’’,
8000rpm, 21 ATC, $12,500, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
DMG, DMC1035V (2011), X-40" Y-22.04" Z-20", Siemens 840D,
See Page 4
27"x 65" MITSUBISHI, M-V70E-FM, Fanuc 16 I, X-50" Y-27" Z-25",
12000rpm, Cat 50 w/Chiller, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
MAZAK, V655/60 (1996), X-59" Y-25" Z-25", M-Plus, #50 taper,
See Page 4
FADAL, VMC-8030 (2002), X-80" Y-30" Z-30", Fadal MP control,
See Page 4
FADAL, 8030 (2002), X-80" Y-30" Z-30", CAT 40, 10,000rpm, (Trader
See Page 4
LEADWELL, MCV-2000P (1999), X-80" Y-36" Z-24", Fanuc O-M,
4000rpm, 2 speeds gear head, 20ATC, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
QUANTUN-KASUGA, Q 2000V (1998), X-80" Y-42" Z-34", Fanuc
18M, 6000rpm, 40ATC, Cat#50, 30hp, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
DMG, DMF 250 (2003), X-98.4" Y-36.2" Z-32.3", Heidenhain iTC530,
See Page 4
M1659 MILLS, UNIVERSAL
LAGUN, FU-TV 140, Horz/Vert, 7.5hp on vert. head, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
See Page 23
12"x 55" CMC, FU-2, Vert/Horz, 6.5hp, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
16"x 77" LAGUN, FU 5-LA, Vert & Horz, ISA-50-Read-out, 3-axis,
Fax: 418-428-4710)
17"x 39" DECKEL, FP 2LB, Angle Table, Vert Hd, Arbors, # 40, Pwr
Fds, DRO, 3Hp, 550V, $7,950, (Stevens Machinery Sales (2005)
M1974 MILLS, HORIZONTAL
23"x 95" CINCINNATI, 525-20-HP (1964), powered vert o/a, #50
taper, pendant, Ref# 2288, (B F G Machine Tools Inc.
Tel: 780-434-7795, Fax: 780-436-0717)
M2075 MILLS, PLANER TYPE
64"x 244" STANKO, 7216-G (1982), 56"x 238"tbl, 71"btwn col,
58"max UR, gr hd, mlg hd, plr hd, side hd, Ref# 2399, (B F G
Machine Tools Inc. Tel: 780-434-7795, Fax: 780-436-0717)
CLUE,
July 2013
Clue July,
2013
M2677 MILLS, TURRET
M2677 MILLS, TURRET
9"x 49" FIRST, #40, 2 Axis DRO, V.S, Pwr Drawbar, 3Hp, 575V, $3,
Fax: 416-798-8439) See Page 2
M2824 MILLS, VERTICAL
9"x 42" BRIDGEPORT, , DRO, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
10"x 50" TOPWELL, 5VK, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
10"x 50" TOS, , 5hp, DRO, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
N5230 NOTCHING MACHINES
3" X 3" (2) PIERCE-ALL, , Notching Dies in Multi-Cycle Air Press,
Foot Pedal, $3,500, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
1/4" x 8.6"sq (NEW) FERRIC, , variable angle, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
1/4" x 8.6"sq (NEW), , Fixed angle, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
5" x 5" x 1/8" PIERCE-ALL, , 90 Degree Notching Die, $850,
Fax: 416-798-8439) See Page 2
P9275 PUNCHES, TURRET
LET US WORK FOR YOU
Trans-Canada Liquidations (TCL) has been in business since 1958 and offers the following services:
AUCTION SALES: We conduct auction sales right across Canada and have facilities in the USA.
purchase any type of manufacturing company for cash or sell on a commission basis.
APPRAISALS: We have certified appraisers on staff who can appraise all types of machinery and equipment;
woodworking, printing, chemicals, fabricating, tool & die, construction, aircraft, foundries, etc...(in the strictest
confidence).
LIQUIDATIONS: We are able to conduct all types of Liquidation Sales, and can show you where more money
can be realized. Complete liquidation is assured; our efficient organization enables us to handle numerous sales a week.
MERGERS & ACQUISITIONS: There is a separate department for Mergers and Acquisitions, and we
have been very successful in buying and selling both ongoing and bankrupt companies for clients. We represent various
groups interested in purchasing manufacturing businesses.
Our clients are Federal and Provincial Governments, Financial Institutions, Chartered Accountants, Trustees in
Bankruptcies and Private Corporations.
No proposition is too large to arouse our interest. The next time you have a plant with an uncertain future... get in touch
with TCL for fast action.
TCL Asset Group Inc.
4610 Dufferin Street, Suite 209
Toronto, Ontario, Canada M3H 5S4
www.ManagingYourAssets.com
O7397 OVENS
Ovens
For Powder Coating, Aging,
Stress Relief, Normalizing
Gas or Electric
Numerous Sizes Available
Call: 905-702-4644
New & Reconditioned , Powered by Electric, Gas, Oil, Propane,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
P5102 PRESSES, HYDRAULIC & AIR
1 Ton DENISON, , 3-1/8" Stroke, 600 IPM, Palm Buttons, 115V, $1,
Fax: 416-798-8439) See Page 2
P5648 PRESSES, KICK
5 Ton ROPER WHITNEY, , 18" Deep Throat, 36" x 24" Table, Floor
Model, $1,350, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
5 Ton WHITNEY JENSEN, , 24” Deep Throat, 42" x 20" Table, Floor
Model, $1,500, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
P6100 PRESSES, OBI
2 Ton AZIMUTH, , 1/4” St, Mech. Clutch, On Bench, 110 Volt, $2,
Fax: 416-798-8439) See Page 2
4 Ton AZIMUTH, , 1-1/4” St, 5-3/4” SH, 1/3 HP, Bench, 110 Volt, $2,
Fax: 416-798-8439) See Page 2
4 Ton BENCHMASTER, , 1" St, 6-1/2" SH, 1/3 HP, Bench, 110 Volt,
Fax: 416-798-8439) See Page 2
5 Ton ALVA ALLEN, , 1-1/4" St., 7" SH, 1/2 HP, Bench, 110 Volt, $2,
Fax: 416-798-8439) See Page 2
5 Ton BENCHMASTER, , 1-1/4”St., 7-1/4”SH, 1/3 HP, Bench, 110
Volt, $2,250, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
5 Ton BLOW, , 1” ST, 6-7/8” SH, 1/2 HP, 550 Volt, $1,850, (Stevens
Fax: 416-798-8439) See Page 2
10 Ton BENCHMASTER, , A/C, 1-1/2” ST, 10-1/4” SH, 550 Volt, $4,
Fax: 416-798-8439) See Page 2
15 Ton ROUSSELLE, , 18” Throat, 2" St, 6-3/4" SH, Mech. Clutch,
550V, $3,500, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
18 Ton BROWN BOGGS, , 2-1/2"Stk, 7-1/4"SH, 1hp, 115/230V,
Mech clutch, $2,500, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
22 Ton AZIMUTH, , 1"Stk, 10-1/2"SH, 135spm. 575V, Air foot pedal,
Fax: 416-798-8439) See Page 2
CLUE,
July 2013
2013
Clue July,
We will
Telephone: (416) 736-1367
Fax: (416) 736-4159
WE APPRAISE • WE LIQUIDATE • WE AUCTION
25 Ton ROUSSELLE, , 2" ST, 10-1/2" SH, 125 SPM, 2 Hp, 575 V,
Mech. Clutch, $3,250, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
30 Ton BROWN BOGGS, , 2-1/2" St, 8-1/2" SH, Mech. Clutch, $3,
Fax: 416-798-8439) See Page 2
40 Ton BLOW, #4, 3"Stk, 7-5/8"SH, Mech clutch, 3hp, 575V, $4,950,
Fax: 416-798-8439) See Page 2
60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
60 Ton BROWN BOGGS, 17 1/2J, (2) 5" stk, A/C, (Brighton
Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, asking $4,950,
(Brighton Machinery Sales Inc Tel: 519-485-7089,
Fax: 519-485-7368)
80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed,
See Page 4
100 Ton BLOW, 7, 30-50spm, 24"x 30"bed, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
150 Ton AIDA, C-frame, 7.87"stk, 15.75"SH, 25"x 48"bed, 30-45spm,
See Page 4
P8000 PRESSES, MISCELLANEOUS
3 Ton GREENERD, Arbor Press, 6” Throat, Bench Model, $350,
Fax: 416-798-8439) See Page 2
8 Ton ROTEX, 15 BK, Manual, 15 Stn, 9/16" - 1-7/8", 24" Throat, $5,
Fax: 416-798-8439) See Page 2
19 Ton TRUMPF, Trupunch 1000 (2006), Ref# 9451, (Jordan Craig
See Page 8
20 Ton TRUMPF, TC2020R Rotation (2002), 19 Sta Rotation, 50"x
100", Ref# 9284, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton STRIPPIT, 1250H20 (2000), 2a/i, Fanuc control, thin style,
Fax: 845-398-0074) See Page 8
22 Ton FINN POWER, E-25 (2000), Siemens, Thick turret,
Load/Unload, Robot LUR2500, Ref# 9696, (Jordan Craig
See Page 8
22 Ton AMADA, Vipros 255 (1998), Fanuc 18P, 31 Sta, 3a/i, Ball
table, Ref# 9684, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton AMADA, Apelio III 2510VL (2001), Fanuc 160 IL, 2KW Laser,
Under Amp, Ref# 9458, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton AMADA, Vipros 255 (1999), Fanuc 18P, 31Sta, 3a/i, brush
table, Ref# 9657, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton AMADA, EM 2510NT (2004), 45sta, 4a/i, Ref# 9614, (Jordan
See Page 8
22 Ton TRUMPF, TC200R (1995), Bosch, Ref# 9649, (Jordan Craig
See Page 8
22 Ton AMADA, Vipros 2510 King (1999), Fanuc 18P, Ref# 9672,
Fax: 845-398-0074) See Page 8
22 Ton MURATEC WIEDEMANN, C2500 (1997), 4 a/i, 12 Station
multi-tool, (ECCO Machinery Tel: 877-513-1773,
Fax: 778-298-2024)
25 Ton TRUMPF, TC500R (1996), 50"x 100", 18stn, Bosch, (Trader
See Page 4
27.5 Ton TRUMPF, TC5000R-1300 (2005), Sheetmaster, Tooling,
Quick sharp, Quick set, Ref# 9584, (Jordan Craig Machinery Int’l
27.5 Ton TRUMPF, TC500R Bosch CNC (2000), 18 station rotation,
Fax: 845-398-0074) See Page 8
27.5 Ton TRUMPF, TC600L-1600 (2000), Siemans 840D, 2400
Watt laser, LiftMaster, Ref# 9403, (Jordan Craig Machinery Int’l
33 Ton WIEDEMANN, Vectrum 3000 (1995), Fanuc 16P, 40 Sta,
2a/i, Ref# 9433, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton WIEDEMANN, Vectrum 3000 (1995), F1-1250 Loader Fanuc
16P, Ref# 9434, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton AMADA, Pega 345Q (2000), Fanuc O4PC, 58 Sta, 2a/i,
Fax: 845-398-0074) See Page 8
33 Ton AMADA, Pega 367 (1993), O4PC, 60"x 72", 45 Sta, 4a/i,
Fax: 845-398-0074) See Page 8
33 Ton FINN POWER, Shear Genius (2001), Siemens 840D,
Installed New:2003, Ref# 9711, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton AMADA, ApelioIII 357V (1998), Fanuc 16-L, 2kw, Approx.
61,000hrs, Ref# 9755, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton AMADA, Vipros III 3510 NT (2003), 45 Sta, 4a/i, Ref# 9728,
Fax: 845-398-0074) See Page 8
33 Ton AMADA, Pega 357 (1996), Fanuc O4PC, 58 Sta, 2a/i, Ref#
Fax: 845-398-0074) See Page 8
33 Ton AMADA, Vipros 367 Queen (1999), Fanuc 18P, 45 Sta, 4a/i,
Fax: 845-398-0074) See Page 8
33 Ton STRIPPIT, FC1000S (1990), Fanuc OP, 3a/i, Ref# 9598,
Fax: 845-398-0074) See Page 8
33 Ton STRIPPIT, 1250S (1991), Fanuc OP, 33 Sta, 3a/i, Ref#
Fax: 845-398-0074) See Page 8
33 Ton AMADA, Pega 345 King (1990), Fanuc O4PC CNC control,
Fax: 845-398-0074) See Page 8
33 Ton AMADA, Vipros 358 King (1996), Fanuc O4PC, 4 a/i, Ref#
Fax: 845-398-0074) See Page 8
33 Ton AMADA, Vipros 358 King II (1999), Fanuc 18P, 4a/i, Ref#
Fax: 845-398-0074) See Page 8
PAGE
Page 21
21
33 Ton AMADA, Vipros 357 Queen (1996), Fanuc O4PC & PHNC,
58 Sta, 2 a/i, Ref# 9713, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
55 Ton AMADA, Coma 557 (1985), Fanuc 6M, 44 Station, 2a/i, Ref#
Fax: 845-398-0074) See Page 8
R4704 ROLLS, ANGLE BENDING
2"x 2"x 3/16" “NEW” TAURING, SAF DS 50HV, Hydraulic, (Trader
See Page 4
4"x 4"x 3/8" Profile Roll, , Hyd. Side guides, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
R5603 ROLLS, PLATE BENDING
22ga x 36" GENERAL, , 2" OD, Wire Grooves, On Stand With
Wheels, $695, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
1/4"x 8’ , 4 Roll standard, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
3/8"x 10’ , 4 Roll with CNC, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
S0403 SANDERS
30" x 96" Table PROGRESS, PMC-264-6, Stroke, 5 Hp, 550 Volt, 4,
300 SFPM, $3,500, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
S0653 SAWS, BAND, HORIZONTAL
18"x 18" HYD-MECH, H18A (2001), Automatic, (Trader Machinery
S0690 SAWS, BAND, VERTICAL
DoALL, T-1421, Tilting Frame, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
20" Throat STARTRITE, , Blade Welder, Variable Speeds, $3,950,
Fax: 416-798-8439) See Page 2
20" Throat POWERMATIC, , Blade Welder, Var. Speeds, $3,500,
Fax: 416-798-8439) See Page 2
20" Throat T-JAW, , Blade Welder, Var. Spds, Power Table, $3,950,
Fax: 416-798-8439) See Page 2
20" Throat T-JAW, No.500, w/ Blade welder, Shear & Grinder,
See Page 4
14"x 21" DoALL, TF-14X21, 32"x 36" table, 5hp, vertical tilting frame,
(Machinerie Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
See Page 23
S0805 SAWS, COLD & FRICTION
11" THOMAS, 275, Manual Cold cut saw, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
S0948 SAWS, MISCELLANEOUS
14" Blade ALUMINUM BEWO, , Fully Auto Saw With Infeed, Length
Stop & Supports, $14,500, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
S3804 SHEARS, HAND & FOOT
16ga x 52" NATIONAL (New), , H.C.H.C. Blades, Man. Back Gauge,
Fax: 416-798-8439) See Page 2
16ga x 52” GENERAL, , Floor model, $2,750, (Stevens Machinery
Sales (2005) Inc Tel: 416-798-3611, Fax: 416-798-8439)
See Page 2
S4105 SHEARS, POWER SQUARING
14ga x 36" BROWN BOGGS, , 60spm, 1.5hp, 110/220V, Man.BG,
Fax: 416-798-8439) See Page 2
16ga x 52" TENNSMITH, , Pneumatic foot pedal, 40spm, $3,950,
Fax: 416-798-8439) See Page 2
16ga x 52" NATIONAL (New), , Hyd, 3hp, 575V, CSA - Fast Dlvy,
Fax: 416-798-8439) See Page 2
14 ga x 10’ NATIONAL (New), , Mechanical, 5hp, 575V, CSA - Fast
Fax: 416-798-8439) See Page 2
12 ga x 52" NATIONAL (New), , Hyd, 3hp, 575V, CSA - Fast Dlvy,
Fax: 416-798-8439) See Page 2
10ga x 52" NATIONAL (New), , Hyd, 5hp, 575V, CSA - Fast Dlvy,
Fax: 416-798-8439) See Page 2
10ga x 48" TECHNOIMPEX, , (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
10ga x 4’ SAMPSON, , Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
10ga x 6’ KEETONA, , Mech., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
PAGE
22
Page 22
Z9000 MISCELLANEOUS
10ga x 10’ EDWARDS, , Mech, Low profile, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
3/16"x 8’ CINCINNATI, (1998), Mech. Cut-To-Length line shear,
50-1/2" table height from floor, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
3/16"x 10’ AMADA, No.3045, Mechanical, Programmable BG,
See Page 4
1/4"x 48" NATIONAL (New), , Hyd., 7-1/2hp, 575V, CSA - Fast Dlvy,
Fax: 416-798-8439) See Page 2
1/4"x 72" NATIONAL (New), , Hyd., 7-1/2hp, 575V, CSA - Fast Dlvy,
Fax: 416-798-8439) See Page 2
1/4"x 10’ “NEW” FERRIC, 3100 x 6, CNC Backgauge, (Ferric
See Page 1
1/4"x 10’ HACO, , w/ Motorized Backgauge, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
1/4"x 10’ EDWARDS, No. 6.5/3000, Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
1/4"x 10’ LVD, , Hydraulic, Power BG, 10hp, 575v, $15,500,
Fax: 416-798-8439) See Page 2
1/4"x 13.5’ “NEW” FERRIC, 4100 x 6, w/Sheet support system, auto
Back gauge, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
3/8"x 10’ PEARSON, , Mot Backgauge, Extra blades, (Ferric
See Page 1
3/8"x 10’ HACO, SST3010, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
3/8"x 14’ ALLSTEEL, , Mot Backgauge, under power in Quebec city,
$12,500, (Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
1/2" x 10’ “NEW” FERRIC, 3100 x 13, CNC Backgauge, (Ferric
See Page 1
48"x 48" FLOW, (1999), (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
48"x 96" FLOW, (1998), 25hp, (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
72"X 144" FLOW, (2006), 100hp, 87000psi, (Stock Machine Tools
Co Tel: 514-326-7006, Fax: 514-329-2599)
72"X 144" OMAX, (2008), 40hp, (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
W3054 WELDERS, SPOT
10 KVA WELDOMATIC, , Rocker Arm, 12” TH, Water Cooledn Tips,
550 V, $2,950, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
18 KVA REX, , 14” Throat, 550 V, Water-Cooled Tips, $1,500,
Fax: 416-798-8439) See Page 2
25 KVA WELDOMATIC, , 7-1/2" Throat, Water-cooled tips, Mech
threadle, $4,950, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
25 KVA ASPA, , 30" Throat, TE 90 Mark II Microprocessor,
Water-cooled tips, $4,950, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
100 KVA PRECISION, , 24” Throat,575/60/1 Volt,Water-Cooled Tip,
Fax: 416-798-8439) See Page 2
Z7000 ACCESSORIES
New BTC Lathe Chucks
Bought for a project and never used.
e
Mak er
ff
an o
One only 16” D-8 4-Jaw
One only 10” D-6 4-Jaw
Both with hard one-piece Jaws
S5456 SLITTING
18" Wide BROOKES, , For Coils, 0.005” - .064” Thick, 550 V, $5,
Fax: 416-798-8439) See Page 2
T0065 TABLES, ROTARY & INDEXING
Horiz/Vert, , 6" Dia, 8" Dia, 14" Dia. - All Good - P.O.R., (Stevens
Fax: 416-798-8439) See Page 2
T0140 TABLES, ROTARY
6.3"(160mm) HAAS, Servo (2007), w/Tailstock, (Trader Machinery
12-1/4" KITIGAWA, TS320R, w/Tailstock, 3-7/8"Bore, (Trader
See Page 4
T7301 TUBE CUTTING & DEBURRING
7-1/2"OD CONTINENTAL, , Pneu length stop & down feed to head,
3hp, 575V, $12,500, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
U4003 UNCOILERS
10" Wide x 600lb x 44"OD EGAN, , 110V, $1,650, (Stevens
Fax: 416-798-8439) See Page 2
10” Wide x 1,000 lb x 50” OD (2) DURANT, , 110V, $1,250, (Stevens
Fax: 416-798-8439) See Page 2
24” Wide x 5,000 lb x 60” OD MANUAL, , $1,000, (Stevens
Fax: 416-798-8439) See Page 2
BACKGAUGES
FOR BRAKES AND SHEARS
MICRO TREND ROBOTICS
¤
¤
¤
¤
¤
DEPTH CONTROL RETROFIT
CUSTOM AUTOMATION REPAIRS
ELECTRONICS & MECHANICAL
NEW DUAL MOTOR BACKGAUGES
1-3 YEAR WARRANTY, EST 1983
“GIVE US YOUR WISH LIST”
1914 PINEGROVE AVE, PICKERING, ON, L1V 1K8
TEL: 905-509-1218 FAX: 905-509-2687
TOLL FREE : 800-451-1144
www. microtrendrobotics ca
W0760 WATER JET CUTTERS
63"x 118" MITSUBISHI, Suprema DX510, 2500 hrs, Installed New
2009, Ref# 9507, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
Hove Machine Services
DIE SHOES, , Good Quantity of Various Sizes For Punch Presses or
Press Brakes, P.O.R., (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
DRO units for lathes & mills NEW, , 2 Axis & 3-Axis controls &
Scales, Good prices, In Stock, (Stevens Machinery Sales (2005)
Z9000 MISCELLANEOUS
Transformers 5 KVA to 1000 KVA, Large Assortment of used, (Park
Thermal International Tel: 905-877-5254, Fax: 905-877-6205)
Pallet Trucks, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Assorted Fans, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Lab Equipment , ASSOCIATED ENVIRONMENTAL CHAMBER,
SK-3105, (Brighton Machinery Sales Inc Tel: 519-485-7089,
Fax: 519-485-7368)
Beader, Trimmer & Flanger JORG, , 21 Gauge M.S., Floor Stand,
3/4 Hp, 575V, $1,950, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
Beader & Crimper BROWN BOGGS, #2, 20ga, 10"Throat, 3/4hp,
110V, $3,950, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
Sand Blast Cabinet EMPIRE, S-20, 110 Volt, 36” x 24” Inside,
Gloves, Etc, $850, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
ORION, , Packaging and Wrapping Machine, (Machinerie Gilles
Lupien Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
Pantograph DECKEL, G1L, 2-D Engraving machine, 20"x 8" table,
1/3hp, 110V, $1,500, (Stevens Machinery Sales (2005) Inc
Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
Sand Blast Cabinet EMPIRE, PF-3648 SRB-4, 36"x 36"x 48", Glove,
Gun, Dust bag, 1hp, 110V, $3,950, (Stevens Machinery Sales
(2005) Inc Tel: 416-798-3611, Fax: 416-798-8439) See Page 2
LNS, , Barfeeds, Servo S2 & S3, Late models, w/Remote pendant,
Excellent, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
14ga x 8’ CHICAGO, , Box & Pan Brake, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
CLUE,
July 2013
Clue July,
2013
Price Reduced / Moving Sale
Machining Center Mitsubishi M-70-E FM,
Fanuc 16- I, Year: 1999, XYZ 50”x 29”x 25”
was $59,500 Now $35,000
Cincinati Arrow 1000, 1997, control Acramatic
2100, 8000 RPM. 21 ATC.
was $19,500 Now $12,500
Z9000 MISCELLANEOUS
Z9000 MISCELLANEOUS
Machining Center Mazak V-10, Mazatrol M-32,
Year 1989, XYZ 30”x 20”x 20”
was $24,500 Now $15,500
Contact: Gilles Lupien
Phone: 819-478-5266
Machining Center Quantun (Japan Make
Kasuga) Q 2000V, Year 1998 XYZ 80”x 42”x 34”
was $79,500 Now $50,000
Machining Center, Leadwell MCV-2000P,
Fanuc O-M, Year 1999, XYZ 80”x 36”x 24”
was $69,000 Now $49,000
MUST SELL
Cincinnati 10ga x 10'
Cell: 819-473-2902Power Squaring Shear
Bliss #21
Punch Press
Lathe CNC Hyunday, HIT-30-S, Seimens 840C,
Over bed: 20’’, Turning: 12’’ X 40’’, Year: 1995
was $32,000 Now $21,000
Website: www.machinerygl.com
Contact: TCL Asset Group Inc.
MACHINERY ADVERTISER
PUBLISHER
David Stapleford
PRINTED BY:
Ricter Web Printing
DELIVERY
Clue is delivered monthly and is sent by
third class mail on or before the business
day following the seventh of each month
DEADLINE
The deadline for advertising is the day
following the last Wednesday of the month
ADDRESS
343 Smith Ave
Burlington, ON, L7R 2T9
Phone: 905-528-7765
Fax: 905-917-0222
www.cluemachines.com
Ph: 416-736-1367 x228
CHUCKSwww.managingyourassets.com
Website:
MATSMOTO, HA-6-8-46, 8" Power chuck
DRILLS, RADIAL
ACRA, Turn ZC480, 20"x 80" 4" Bore
SOFIA, CU582, 22.8"x 80"
PBR, TM-300, 24"x 196"
SEIWA, MG-915, 36"
TOS, SUI80x 4000, 32"x 160"
GEAR HOBBERS
BARBER COLEMAN, 14-15 Horizontal
MIKRON, 79 small, 2 available
TOS, SU125x 6000, 50"x 240"
ADVERTISERS DIRECTORY
MILLS, TURRET
BROWN & SHARPE, 6"x 12"
HH ROBERTS, FLG-500 VMC, 15"x 21" (2004)
FIRST, LC-185,
9"x 49" Vertical
PHONE
COMPANY
HARIG BALLWAY,
6"x 18"
NICCO, NFG-515HD, 6"x 20" Form grinder
Alberta
KEYSEATERS
PAGE
HOLKE, F-11-V, 9"x 49" with DRO
B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795
........780-436-0717 .......15
DELTA, 9"x 49" w/DRO
DAVIS, #5
British
Columbia
LATHES,
CNC
HOLKE, F11-V, 10"x 48" Vertical w/ 3-Axis DRO
Ontario
COLCHESTER, Tornado 90, 16" (2004)
FORTWORTH, CS VBM-5VL, 19"x 86" vertical bed type
ECCO
Machinery, Surrey (Rick) ......................................................778-298-2023
........778-298-2024 .......17
PRVOMAJSKA, 11"x 43"
DAEWOO, 10 HC CNC Turning Centre
Modern
(BC) dual
Ltd, turrets
Port Coquitlam (Pam) ..................................604-472-1444
MILLS, VERTICAL ........604-472-1455 .......16
MIYANO,Tool
BNC-34T
PRESSES, HYDRAULIC
& AIR
Brighton
Machinery
Ingersoll (Brian)...............................519-485-7089
........519-485-7368
.......15
COLCHESTER,
StormSales
90, 16"Inc,
(2000)
JOSEPH POTTS, 60 Ton H-Frame
Cameron
Steel,ENGINE
Lindsay (Bob) ........................................................705-878-0544
........705-878-0560 .......21
LATHES,
VIBRATORY FINISHER
Compumachine
Canada,
(Peter).........................................416-291-9499
........416-291-4990 .......22
LANSING, TAD-FS-650,
53" Toronto
facing lathe
ROTO-FINISH,
72" diameter ........416-962-9601 .......27
Corporate
Assets
Inc,
Toronto
(Daphne)
.........................................416-962-9600
PBR, 13"x 40"
MISCELLANEOUS ......................................10
Dipaolo
Retrofit
Ltd.,
NARDINI,CNC
MS-1440,
14"x
40" Mississauga (Nelson) ............................905-676-9265
MORI SEIKI, SL-1A, Chip Conveyor
Fabtec
.......18
ELLIOT,Machine
15"x 30" Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054
Tilting box table, 30"x 24"x 22"........905-820-3234 .........3
VOEST,
20"x 60" Inc, Mississauga (Koen) ......................................877-337-7424
Ferric
Machinery
Haco Canada, Mississauga (Francis)..............................................905-828-1087 ........905-828-2062 .......26
EQUIPMENT
APPRAISALS * Toronto,
Ontario .......13
Havlik Int’lCERTIFIED
Machinery, Cambridge
(John) ........................................519-624-6240
........519-624-4119
Phone:
(905)
793-8080
Fax:
(905)
793-2190
Email:
[email protected]
Hayden Lee, Markham (Hayden) ....................................................905-201-7841 ........905-201-7842 .......14
Hove Machine Services, Wasaga Beach (David) .............................705-429-5910 ........705-429-1557 .......15
Infinity Assets Solutions, Concord (Leslie)......................................905-669-8893 ........905-669-7512 .........2
L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890 ........905-876-1959Page
.......12
23
Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25
Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218 ........905-509-2687 .......15
WWW.SKBRALY.COM
Clue July, 2013
FAX
DARBERT, Microcut, 9"x 49" Vertical
New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440
MODERN TOOL BC LTD.
1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440
Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.
DURMA AD-R37175 CNC
Hydraulic Press Brake
HYD-MECH S-20A III
Automatic Band-Saw
SCOTCHMAN 6509-24M
Hydraulic Ironworker
ERCOLINA CE-50HE Angle
Bending Rolls
On the web @ www.moderntoolbc.com
Follow us on Twitter @ModernToolBC
Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm
Service & Parts Sales | Toll-Free: 1-800-717-1440
SYLVAIN TREMBLAY MACHINERY
KONE 70TM (1X70TM)+(2X35TM)+(1X5TM) on
same bridge X 77'. lift 70', variable speed. (2000)
KONE 30TM X 56' + AUX 5TM,
68' lift (2000)
Under running KONE 15TM
(2X7.5TM) X 37', lift 25'
KONE 25TM X 38', lift 20'. (2006)
175' run way + radio control
Under running KONE 2TM X 20',
lift 18', (2000)
KONE 50TM (2x25TM) X 45',
lift 70'. (2000)
Contact: Gaétan Vivier
Page 24
Cell: (819) 314-8739
Clue July, 2013
COMPRESSORS
IRONWORKERS
DEVILBISS 3hp 3ph
CHAMPION 20hp w/ 100gal tank
KINGSLAND (66T) Mechanical Ironworker J21,
Type A, 5hp
DRILLS
LATHES
CANADIAN drill
KING drill
ALLEN drill press, 3ph
DELTA MILWAUKEE single ph
ROCKWELL drill press
YAMAGUCHI drill press
ARBOGA (G1304) Bench top drill
VERMAN drill press
HERBERT 15" 3ph
FORCE 14"x 40" single phase
CARLTON 14"x 60"
ZUBAL 14"x 60"
TOS (SV18RA) 15"x 60"
VOEST 17"x 60"
SOFIA 18"x 80" 3ph
T-JAW (500) 20" Yoke
RIGID (MS1065LZA) 10" compound mitre saw
MARVEL 10"x 14" Tilting, Programmable
SCOTCHMAN (350LT) 12" metal cutting mitre
saw, w/ feed conveyor & foot control
MAKITA 14" Chop saw, single phase
ROCKWELL (73-1864) 24" scroll saw
BEAVER (3100) 24" Scroll saw
MILLS, UNIVERSAL
BRIDGEPORT 9"x 32"
HASCO 9"x 42" R8 taper
KONDIA (FV-I) 9"x 42"
PROMAJSKA 10"x 27" 1/2 Ton
DRILLS, RADIAL
KAOMING 3’ arm 3ph
LIFT TRUCKS
SHEARS
LODGE & SHIPLEY 3/8"x 8’ mech. gap shear
PEARSON 3/8"x 10’ hyd shear, w/ squaring
arm, sheet support, FOBG
PRESSES
TOYOTA 3000 lb 3 wheel, electric
TOYOTA 5000lb propane
HYSTER 5000lb side shift, 3 stage mast
Assorted Pallet Trucks
HYSTER 15000 lb propane
CLARKE 15000 lb lift truck, propane
GRINDERS
BALDOR 3/4hp pedestal grinder
THOR Pedestal grinder
HARIG (612) Surface grinder
ARBOGA Pedestal grinder, 550v, 3ph
AMADA Punch grinder
NORTON 6"x 18" hydraulic surface grinder
AK WILLIAMS 6"x 18" Surface grinder
HYD-MECH (S20)
DoALL (C916A)
ELLIOT 6"x 10" Single phase
GREENLEE (1346) 7"x 10" single phase
BOMAR 13"x 20" semi-automatic
ARBOR (#3) Heavy duty
ARBOR (#2)
GREENERD (#3a) Arbor Press
B&B 25T Punch Press, 3ph
ARCAN 40T H Press
KR WILSON 50T H Press
BUFFALO 100T H press
WELDERS
LINCOLN Powerwave Arclink 455M
LINCOLN (Idealarc CV-300) mig welder
THERMAL ARC (PAK 5Xr) Plasma cutter
A&H Electronics spot welder, 30KVA
CANOX (C-330) tig/stick, high frequency
CANOX (C-SW300) Tig/Mig
CANOX (C-CP-300) Arc power source
MILLER (Deltaweld 650DC) Arc power source
LINCOLN (Power Mig 255)
CANOX Arc Welder
Portable Stud Welder
ROLLS
B&B 36" x 18ga Hand Rolls
SANDERS
TOSHIBA (DS-20) disc sander/grinder
NATRIBON belt sander 300ml belt
MILLER (Spectrum 701) plasma cutting system
MILLERMATIC (200) Mig welder, single phase
HOBART (Mega-Flex 650 RVS) Stick/tig/mig
MEMCO (AC-225)
LINCOLN (Migpak 15)
MISCELLANEOUS
Assorted Transformers
Hydraulic Pump
Industrial Fan, VARY
SUNNEN (Dial) bore gauge
MITUTOYO height gauges, assorted styles
Wet Soda Blaster 38 x 41 x 38
Assorted Rotary Tables
Mag. Lathe Chuck, ECLIPSE
Assorted Demagnetisers
HILTI (DXA40 driver) w/ XHN date stamp att
Bead Rolling Machine, CMZ7, 114v, single ph
PSC Pressure Washer 600v, 3ph
Angle Plates
NAREX boring/facing head
Pin gauges
Assorted Measuring Tools
Collet sets
Assorted vises
Assorted Chain Hoists
Threading Caddy, RIGID
Hones
1000lb Magnet
Embossing System, ST-880E
Hardness Testers
Phone: 905-634-8442 Fax: 905-681-6940
4280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5
www.paulmachinery.com
MACHINERY INC.
INDUSTRIAL MACHINE TOOLS & APPRAISALS
131 Citation Dr, Units 17 & 18
VAUGHAN-CONCORD
ONTARIO, L4K 2R3
Tel: (905) 738-8730
Fax: (905) 738-5148
website:www.sabito.com
CNC MACHINES CNC MACHINES CNC MACHINES CNC MACHINES CNC MACHINES
Late Model, Pre-owned, CNC Machine Tools.
MACHINING CENTRES, VERT
CNC MILL
LEADWELL, MCV 760 XL
HERMLE, C800U (2001), 5-axis
CHIRON, FZ08K Magnum (2007), 5-axis
OKUMA, MC-4VA (1984)
MATSUURA, ES-800, CNC (2005)
314" X 122" TOSHIBA MPC-3680 B Double Column Bridge Mill (2009)
BORING MILL, HORZ
4" TOS, W100-A, (1995), 4-Axis DRO
5" G & L, 450 Series MC50 Table Type, Fanuc CNC
GRINDERS, SURFACE
10" x 24" THOMPSON
16"x 59" TOS, BHR 40B, Hydraulic (1989)
20" X 48" KARSTENS K29 Universal CNC Grinder
MACHINING CENTERS, HORZ
DAEWOO, DMH 400 (2000)
MAZAK Integrex E-1060V/8II (2010)
MITSUBISHI, 19.9"x19.9", M-H4050 CNC (2004)
MITSUBISHI, MH-50C, 20" x 20", 158 ATC (1989)
OTHER CNC MACHINES
Combination Punch & High Def, W.A. WHITNEY 3400 RTC 680-850
Co-ordinate Measuring Machine, ZEISS Contura G2 Aktiv (2010)
Co-ordinate Measuring Machine, MITUTOYO, BRT 707
CNC Angle Rolls, TAURING, Alpha 40, 2"x 2"x 3/16"
CNC Woodworking Sizing System, SCHEER PA7000 (2002)
Coil Line, AIDA LFG 600R, Width 2.8"-23.6".Thick.02"-.177"
Feeder, IEMCA Prodigy 547, 6ft bar length.mag cap 15.75"(3/16"-2")
Hydraulic Press Brake, 135T X 12FT ATLANTIC HD135-12-10
Hydraulic Shear, 1/2" X 10' HACO HSLX 3013, .39"FOPBG
MACHINING CENTER, UNIV
HURCO C-40-U, 5 AXIS CNC (2004)
DECKEL MAHO, DMC 100 U, DouBlock 5-axis (2005)
CNC LATHES
15.3 x 43.3" NAKAMURA TOME SUPER NTX Multi Axis(2009)
TAKISAWA, TS-20, CNC
WASINO, LJ-63M (1988)
APPRAISAL SERVICES
Clue July, 2013
-
AMEA & USPAP CERTIFIED
Page 25
Infinity_Clue_July_Layout 1 6/26/13 10:28 AM Page 1
HURON MOLD & TOOL
CNC Machining Facility
Auction: Thursday July 11, 10:30 AM
Inspection: Wednesday July 10, 9:00 AM - 4:00 PM
15 Cope Court, Guelph, Ontario
FEATURING: (2) DAHLIH CNC VMC’s, KAFO/PHOENIX CNC Contour Milling Machine,
KAO MING CNC Gantry Mill, FORTWORTH Vertical Mill & More...
CORE SYSTEMS LLC. (SALE 2: MT. GILEAD LOCATION)
Major Plastic Injection Molding Facility & Real Estate
Auction: Tuesday July 16, 10:30 AM (ET)
Inspection: Monday, July 15, from 9:00 AM to 4:00 PM
420 Douglas Street, Mt. Gilead, Ohio
FEATURING: (24) NISSEI, MITSUBISHI, VAN DORN, TOSHIBA & CINCINNATI MILACRON
Horizontal & Vertical Injection Molding Machines Up to 1,000 Ton Capacity, Late Model Robots,
Secondary Equipment, Toolroom, Material Handling, Plant Support, Vacuum Loaders, Dryers,
Temperature Controllers, Blenders, Plus Real Estate, & More...
ONLINE LY
ON
AUCTION
Due to the Extrusion Department Closure of:
ACAN WINDOWS & DOORS
7 Vinyl Profile Extruder Lines – As New As 2011!
Bidding Starts: Tuesday July 23rd 9 AM (ET)
Bidding Ends: Wednesday July 24th 2 PM (ET)
Inspection: Thursday July 18, from 9:00 AM to 3:00 PM
1641 Topsail Road, Paradise, Newfoundland
FEATURING: DYNAFLOW Abrasive Flow Die Cleaning Machine, Plus 27 Sets of Assorted Profile Dies,
(3) REINFENHAUSER Standalone Coextruders, (6) OHM Side Loaders, PVC Blending System + (2) Silos,
CHEVALIER 12” x 24” Surface Grinder, JIN YOUNG EDM, MARLEY Outdoor Cooling Tower, Plus: (2) TRANSCRANE
1 Ton Cranes, (5) Welder, ATLAS COPCO 125 HP Air Compressor, GALAXY Air Dryer And Scissor Table
Visit infinityassets.com For Brochures And Additional
Details On All Sales. Bid Live Onsite & Online
ARE YOU LOOKING TO SELL ASSETS?
DO YOU NEED ASSETS APPRAISED?
Call Infinity Asset Solutions in confidence to discuss the sale of your assets.
From one machine to an entire facility – we can help! Infinity also provides asset
appraisal services. We look forward to meeting you to evaluate your assets.
A U C T I O N S • L I Q U I D AT I O N S
FINANCING • APPRAISALS
905.669.8893
infinityassets.com
Page 26
Like us at: facebook.com/
Infinity-Asset-Solutions-Inc
Follow us at:
Follow us at: InfinityAstwitter.com/
twitter.com/
InfinityAssets
Clue July, 2013
Clue July, 2013
Page 27
M A C H I N E R Y
899 Danforth Place
Burlington, ON L7T 1S1
Phone: 905-528-7765
Fax: 905-917-0222
Y. Franke & Company, LLC.
3 Golf Center, Suite 371
Hoffman Estates, IL 60169
P: 847-874-8972
Specialists in 5-Axis Machining Centers
www.yfranke.com
[email protected]
INSPECT UNDER POWER ON OUR FLOOR!
1997 DMG DECKEL MAHO DMU60P
2004 DMG DECKEL MAHO DMC60T
■
■
■
■
■
■
■
■
■
■
■
■
5-Axis Simultaneous Universal Machining Center:
Heidenhain TNC426PB Control
X23.6” Y27.6” Z21.7”, 24.8” Dia. Trunion Table
Auto Swivel Head for both horiz./vert. machining
CAT40, 20 hp, 12,000 rpm
60 ATC, Glass Scales
Certified with Renishaw ballbar test
Millplus iT Control
X30.7" Y22" Z22"
B-Axis Swivel Head with 150° swivel range
CAT40, 37.5 hp, 18,000 rpm
60 ATC, Glass Scales, 580 PSI CTS, Laser, Probe
2-Station Automatic Pallet Changer
1999 DMG DECKEL MAHO DMU80P
■
■
■
■
■
■
Millplus Control
X31.5" Y27.6" Z23.6", 24.8" Dia. Trunnion Table
Auto Swivel Head for both Horiz/Vert machining
CAT40, 20hp, 12,000 rpm
60 ATC, Glass Scales, 580 PSI CTS, Probe
2001 DMG DECKEL MAHO DMU80P hi-dyn,
■
■
■
■
■
■
Heidenhain TNC430 Control
X31.5” Y27.6” Z23.6”, 24.8” Dia. Trunnion Table
Auto Swivel Head for both horiz./vert. machining
HSK63A, 37.5 hp, 12,000 rpm
60 ATC, Glass Scales, 580 PSI CTS, Laser, Probe
A Franke Family Tradition Since 1981
Page 28
Clue July, 2013
View complete details and request a quote for these machines on our website.

Your Production Matters To Us - Used Cnc Machines Canada | Cnc

Transcription

Similar documents

5792 Atlantic Drive, unit 5, Mississauga, Ontario

Your Production Matters To Us - Used Cnc Machines Canada | Cnc

October Issue 2012 - PDF - Used Cnc Machines Canada | Cnc

10th - Industrial Machine Trader