Valves for air process

UnConventional Air Design
VALVES
for AIR PROCESS
Guaranteed reliability, resistance and sealing
in every Rimor valves series
Valvole
Valves
more themes with one partner
VALVES FEATURES
Valves are available in standard or custom sizes and a wide range of operatives temperature, materials, tightness level and
sealing capacity.
GENERAL FEATURES:
•
•
•
•
Sizes up to 1500 mm of diameter and special realisation on customer’s request
Profiles cut with high precision lazer
Maintenance intervention reduced to minumum
Products realised following the Normative FCI 70-2
in the picture, the thermalfluid dynamic analysis and the
study of a round valve seal.
In addition, Rimor provides to thermal-fluid dynamics and structural simulations for
the valves. It has been collected experiences about valve regulation, seal and torque.
rimor valves models
diverter
diverter
inverter
round mono series
round double series
square
simply and heavy
round atex series
dapò
bypass
knife
round and square
dapò
SEAL CLASSES
Based on the flat/seats seal requirements and on the operative conditions, Rimor fulfil round valves with the following seal
classes: (flat-blue, seats-grey)
0 TYPE
CLASS I
No seal
METAL TYPE II
METAL TYPE III
Metal seats seal
with reinforcement
CLASSE II (Kvs < 0,5)
CLASSE III (Kvs < 0,1)
PACKING TYPE
CLASS III
Packing seal
FLUXAL TYPE
Fluxal seal
(for seals)
CLEANER TYPE
Fluxal seal
(for seats cleaning)
temperature and PRESSURE classes
Dimensional and material planning choices are based on the valve’s temperature and pressure operative conditions. Below
there are different temperatures and pressures classes with the related values.
P1
P2
Fino a 5000 Pa Fino a 10000 Pa
P4
Fino a 50000 Pa
P3
Fino a 20000 Pa
PRESSURE CLASSES
AVAILABLE
Pa
T1
Fino a 350°C
T2
Fino a 550°C
T3
T4
Fino a 700°C Fino a 800°C
T5
T6
Fino a 900°C Fino a 1000°C
TEMPERATURES CLASSES
AVAILABLE WITH THE POSSIBLE
MATERIALS USES
°C
Fe 360
350°
Corten
450°
AISI 304
700°
AISI 316
materialS USED:
800°
900°
AISI 321
1000°
AISI 310
fe 360, aisi 304, aisi 316, aisi 310,
aisi 321, manganese, corten,
refraCTORY.
movement types
Valve’s movement can be reached through a manual, electric or pneumatic system:
LEVER
ROTO MANUAL
Handwheel
gearbox
PNEUMO LINEAR
Linear
pneumatic
On lever gearbox
PNEUMO ROTO
Rotating pneumatic
or handwheel gearbox
CONTROL AND FEEDBACK TYPES
ELECTRIC CONTROL:
PNEUMATIC CONTROL:
• 3 lines control ON/OFF
• 0-10V o 4-20 mA modulating
• 3 ways control ON/OFF
• 0-10V o 4-20 mA modulating
Operation time 90° : 6-210 s
Operation time 90° : 1-12s
0 TYPE
Packing seal
on spring
Linear eletric
ELECTRO ROTO
Rotating electric
END-STROKE
The valve can give the feedback signal with 0-10V o 4-20 mA. Based on the
chosen actuator, there are different ways to control the valve:
seal systems
ELECTRO LINEAR
InduCTIVE IP 68
MecHAnic
RID ON
PNEUMATIC PISTON
SECURITY AND EMERGENCY SYSTEMS
FLUXED TYPE
Nitrogen fluxed seal (N2)
Grease fluxed seal
Pneumo Safe
valve with pneumatic
closing system
Safe electric
valve with electric
closing system
Our competences
more themes with one partner
Ventilatori industriali e agitatori per forni
Industrial fan and furnace agitators
Ventilatori insonorizzati Rotocabe
Soundproof fans Rotocabe
Filtrazione aria
Air filtering
Cabine afone
Soundproof cabine
Valvole
Valves
©
©
Impianti per il trattamento delle superfici metalliche
Plants for metal surfaces treatment
Sistema Recube©, unità di ventilazione
e riscaldo a recupero
Recube system©, energy recovery unit
for ventilation and heating
Trasporto e granulazione rifili
Transport and trims shredding
• Settoreautomotive,camereclimatiche,testingsolution
• Settorecementolaterizi
• Settoreventilazionegallerieeminiere
• Settoreprintingeconverting
• Settoreforniefonderie
• Settoreaspirazioneegranulazioneinlineadirifilidifilmplastici
• Settorelavorazionevetro
• Settoreenergia-emissioni-rifiuti
• Settorebiomasse
Package condizionamento e abbattimento umidità
Conditioning and umidity removal unit
Progettazione e simulazioni
Engineering and simulations
Impianti e assistenza manutentiva
Plants and maintenance
Distribuzione e consulenza
Distribution and consulting
Quadri elettrici
Powerboard
Automotive testing
Automotive testing
Master distributor and consultant
Rimor follows you along the entire process
Target industry
- automotive
- chemical & pharmaceutical
- energy / compost /
syngas / biomasses
- foundry & furnaces
- glass processing
- thermal processing
- oil / gas
- printing & converting
- trims suction & shredding
ENGINEERING - PRODUCTION - DISTRIBUTION
Rimor S.r.l. Via Luigi Santagata, 43-10156 Torino (Italia) Tel +39 011 2238561 Fax +39 011 2238750 E-mail: [email protected] www.rimor.eu
Valvole_EN_01