Electronic Metal Halide Ballasts for 39 Watt Lamps

Multi-Voltage DCP™
Electronic Metal Halide Ballasts for 39 Watt Lamps
One ballast for all voltages
from 120V through 277V!
NAiS DCP™ (Dual Constant Power) Electronic
Metal Halide Ballasts for M130 ceramic or
equivalent metal halide lamps (39 watt lamps).
This integrated unit replaces the ballast, capacitor,
and the ignitor of magnetic ballast systems.
Shown with side leads, bottom leads also available.
Features and Benefits:
Specifications:
• Excellent line regulations: ±0.5% output variation with
±10% changes in line voltage
• Reduction in visual flicker
• Increases lamp life
39W Metal Halide M130 or equivalent
Lamps
Input Voltage
Universal 120-277V 50/60 hertz
Power Factor
High
46W
Input Power
• Increased reliability and safety by lamp “Shut-Down
Function”: (Resets by turning off line power)
Input Current (Maximum)
• Ease of assembly: only one unit to mount
Lamp Frequency
• Light weight (1.4 lbs.)
EMI/RFI
120V: 0.39A
170 Hertz Square-Wave
Complies with FCC 18C, non-consumer limits
1.2 typical
UL Outdoor Type 1, suitable for recessed use
Safety
• Eliminates long term lamp cycling. No need to wait for
lamps to cycle to identify replacement
Thermal Protection
Functions at approximately 90°C hot spot
1
5 years - maximum case temperature <75°C
3 years - maximum case temperature <80°C
Warranty
• Sound rated “A” for indoor applications
• Thermally protected
• Transient protection
277V: 0.17A
<15%
Harmonic Distortion
Lamp Current Crest Factor
• Energy savings: up to 15% vs. magnetic
230V: 0.20A
Minimum Lamp Start Temp.
–30°C
Minimum Ballast Temp.
–15°C
Maximum Mounting Distance
15 feet
Note 1: Warranty is based on a maximum operating time of 4000 hours per year. For additional
operating hours consult with Aromat Application Engineering.
Product Summary:
Note 2: Consult Lamp Manufacturer for lamp compatibility approval.
39W Metal Halide M130 or equivalent lamp
Lamp
Input Volts
Model Number
Mounting/Lead Exit
Safety
120V-277V 50/60Hz
M3912-27CK-3EU
M3912-27CK-3EU-F
M3912-27CK-3EU-J
No feet with
side leads exit
Feet with
side leads exit
Studs with
bottom leads exit
Recognized Component,
UL / CUL
CE Pending
UL / CUL
CE Pending
UL / CUL
CE Pending
Lamp Holder
Minimum 4KV Pulse Rated
Aromat reserves the right to change any of the above performance characteristics without notice.
For more information, call: 1-888-4-AROMAT
Visit our Web Site: www.aromat.com
Wiring Diagram
Safety Instructions
Blue
• Always disconnect power to the entire fixture before
installation and/or removal of ballasts or controls.
Blue
• Ballast case and fixture must be grounded.
Black
• Install per the national and local electric codes.
• Properly dispose of any replaced ballasts and lamps.
AC
60Hz
LAMP
DCP
BALLAST
• DO NOT connect lamp leads to ground or neutral.
White
(Green on No-feet Version)
Dimensions - Millimeters / Inches
M13912-27CK-3EU-F
M3912-27CK-3EU-J
89.66 3.53
89.66 3.53
72.14 2.84
50.8 2
8 - 32 Studs
39.88 1.57
39.88 1.57
254 10
254 10
10.92
0.43
132.08 5.20
139.95 5.51
119.38 4.70
119.38 4.70
M3912-27CK-3EU
89.66 3.53
NOTE:
1. For additional installation and operational
information, please refer to the Application
Guidelines.
2. Dimensional Tolerances:
Case: ± 0.3mm ± 0.012"
Lead Wires: +50mm +2"
–30mm –1"
39.88 1.57
254 10
119.38 4.70
Aromat Corporation
629 Central Avenue, New Providence, NJ 07974 · 1-888-4-AROMAT · Fax: 908-771-5656
3M201