Kewaunee Fume Hoods Lit. No. 11030

VWR Furniture
Complete Dedicated Furniture Solutions
Factory trained VWR Furniture Specialists work in
coordination with VWR sales representatives to
help you select the most functional and costeffective solutions for your lab. They will closely
monitor inventory of top-quality furniture and
components, as well as provide complete project
supervision from proposal through installation.
• VWR Furniture Project Estimators help you
identify your lab furniture requirements and
provide a comprehensive quote of your project’s
cost
• VWR Furniture Design Specialists create lab
plans to suit your specifications using the latest
computer aided design (CAD) software
• VWR Project Coordinators manage every detail
including ordering, shipping, and final installation
• VWR Furniture Installers have extensive
experience and knowledge of our product line,
insuring a fast, trouble-free finish to your project
To learn more about VWR Furniture Products,
Services, and Customer Support visit vwr.com
today!
0811 (10M) Lit. No. 11030
KEWAUNEE
Supreme Air Series
Fume Hoods
Supreme Air Fume Hood Construction
Supreme Air Fume Hood Technical Data
The Supreme Air Fume Hood design is based on rigid
frame construction that assures solid installation and
low vibration and sound levels. Access panels are
easily removable to access service lines and fittings.
Radius corner posts and airfoils, plus fixed interior baffle
settings assure a high level of comfort, safety and
efficiency.
Supreme Air Fume Hood Wiring Diagram
With a variety of models available and selected option
packages, this new generation of fume hoods can be
tailored to the application needs of your modern laboratory.
Aesthetically pleasing curved airfoils, contemporary
controls and devices, and an eye-pleasing light neutral
color, make this hard-working laboratory safety device
an attractive part of the total laboratory environment.
Excellent interior lighting
• Single tube, low profile,T5
fluorescent light fixture
• Tube replacement from
outside of hood
KMER modified
epoxy resin liner
• 1/4" thick, solid, light
neutral colored liner
• Class A fire rating
• Low profile, self-gasketing,
interior access panel —
removable without tools
• Stainless steel liner for
Isotope and Perchloric Acid
Hoods
Customizable accessory
offerings
• A full array of service
fittings
• Monitoring safety alarm
available
Prewired light and
receptacles
• UL listed per UL 3101-1
1993
Low profile PVC sash tracks
• Smooth sash operation
• Reduced air turbulence
• Seals the interior side panel
Easy-to-operate full vision
sash with:
• Full length painted
aluminum handle for neat,
clean appearance and
streamlined air features
• Exclusive sash leveling and
alignment features
Independent frame
construction
• Rigid structural frame
• Allows liner panel
replacement
• Stainless steel fasteners
concealed with corrosionresistant caps
Narrow-radiused corner
posts
• Enhances aerodynamic air
flow
• 4" width creates more
interior work space
Radiused air foil
• Streamline air flow
— low turbulence
• Heavy gauge stainless
steel for durability
Exclusive Kemresin work
tops
• Dished black epoxy resin
worksurface available
• Integral stainless steel
worksurface in Isotope and
Perchloric Acid hoods
Specialized base cabinets
• UL listed solvent storage
cabinets
• One-piece polyethylene
lined acid storage cabinets
• Vacuum pump storage
cabinets
• Cabinets available in both
wood and steel
SQUARE D THERMAL UNIT SIZING
The fan switch requires the installation of a Square D Thermal unit to function. The thermal unit is not supplied with the
switch as it must be selected based on the full load amperage of the fan motor.
Motor Full-load
Current Amperes
0.41 - 0.44
0.45 - 0.49
0.50 - 0.53
0.54 - 0.58
0.59 - 0.65
0.66 - 0.71
0.72 - 0.78
0.79 - 0.85
0.86 - 0.96
0.97 - 1.04
1.05 - 1.16
Thermal
Unit No.
A .49
A .54
A .59
A .65
A .71
A .78
A .86
A .97
A 1.02
A 1.16
A 1.25
Motor Full-load
Current Amperes
1.17 - 1.29
1.30 - 1.37
1.38 - 1.47
1.48 - 1.56
1.57 - 1.65
1.66 - 1.79
1.80 - 1.95
1.96 - 2.15
2.16 - 2.38
2.39 - 2.75
2.76 - 2.84
Thermal
Unit No.
A 1.39
A 1.54
A 1.63
A 1.75
A 1.86
A 1.99
A 2.15
A 2.31
A 2.57
A 2.81
A 3.61
Motor Full-load
Current Amperes
2.85 - 3.06
3.07 - 3.45
3.46 - 3.70
3.71 - 4.07
4.08 - 4.32
4.33 - 4.90
4.91 - 5.35
5.36 - 5.85
5.86 - 6.41
6.42 - 6.79
6.80 - 7.57
Thermal
Unit No.
A 3.95
A 4.32
A 4.79
A 5.30
A 5.78
A 6.20
A 6.99
A 7.65
A 8.38
A 9.25
A 9.85
Motor Full-load
Current Amperes
7.58 - 8.15
8.16 - 8.98
8.99 - 9.67
9.68 - 9.95
9.96 - 10.8
10.9 - 12.1
12.2 - 13.1
13.2 - 13.9
14.0 - 15.0
15.1 - 16.0
Thermal
Unit No.
A 11.0
A 11.9
A 13.2
A 14.1
A 14.8
A 16.2
A 17.9
A 19.8
A 21.3
A 25.2
How to Order a Fume Hood
1
Select Fume Hood Type and Size
 General Purpose Bench Hood
4ft 5ft 6ft 8ft
page 2
4ft 5ft 6ft
page 3
4ft 5ft 6ft
page 5
4ft 5ft 6ft
page 6
6ft
page 4
 High Performance Bench Hood
 Isotope Bench Hood
 Perchloric Acid Bench Hood
 General Purpose Walk-in Hood
2
Select Work Top and Cup Sink
 Standard Work Top
page 11
4ft 5ft 6ft 8ft
 Work Top with Vent Hole
page 11
4ft 5ft 6ft 8ft
3
 Steel Cabinets
Stack Head
(required only if using Air Chamber)
4
Select Cabinet Trim
 Steel Cabinet Trim
see page 16
4ft-6ft Hood
Exhaust Fan
see page 16
5
 Isotope Hood Fittings
see page 16
see page 16
1
page 10
page 10
Air Gas Vac CW
DW CW Gooseneck
Exhaust Duct
see page 7
Select Service Fittings
Air Gas Vac CW
DW CW Gooseneck
(required only if using Air Chamber)
Auxiliary Air
Chamber
(optional)
page 9
8ft hood
 Standard Fittings
Auxiliary Air Duct
6
page 8
General Acid Storage
Solvent Vac Pump
see page 16
Auxiliary Air Fan
Select Base Storage Cabinets
 Airflow Alarm
6
Other Options
 Auxiliary Air Chamber
 Restricted By-pass
page 11
when required
page 7
page 7
Fume Hood
see page 2-6
5
Service Fittings
see page 10
2
Work Top
see page11
3
Base Cabinets
see page 8-9
4
Cabinet Trim
see page 9
1
Supreme Air Fume Hoods
REDISHIP
General Purpose Bench Hood
Specifications
Supreme Air General Purpose Bench Hoods are furnished
with Kewaunee’s Modified Epoxy Resin (KMER) lining and
baffles, with fixed open center, upper, and lower exhaust
slots. Hoods are complete with a Type 304 stainless steel
lower deflector vane; counterbalanced, frameless sash of
1/4” combination safety glass; a full length handle; interior
plumbing access panels; and louvered top front panel.
Hood exteriors are fabricated of cold rolled steel,
phosphate coated with a baked chemical resistant,
synthetic resin, light neutral color finish.. Polyethylene
exhaust duct collar is 1115/16” O.D.
Supreme Air Genearl Purpose Bench Hoods may be fitted
with a Restricted By-pass panel for use with VAV exhaust
systems or may be equipped with an Auxiliary Air
Chamber.
Accessories Include: Two 120 volt AC 20 amp GFI
duplex receptacles,single-tube, T5, fluorescent light fixture
(tube included) with 20 amp light switch, and a motor rated fan
switch (thermal unit not provided). Devices are wired to
junction boxes mounted at the top exterior of the hood.
Additional Parts Required for
Complete Fume Hood Assembly
Work Top
page 11
Base Cabinets page 8
Service Fittings page 10
DIMENSIONS
HEIGHT
Overall Dimensions 893/4" **
Sash Opening
28" *
Work Top
37" **
Clearance (sash up)
97" **
page 11
page 16
Cupsink
Fan/Blower
LENGTH
48"
40"
40"
...
60"
52"
52"
...
72"
64"
64"
...
96"
88"
88"
...
Optional Accessories: Each front post and interior end
liner is punched for remote control service fittings (5 left
side, 4 right side). The right hand post is punched for an
Air Alert 300 Alarm and is furnished with a cover plate.
Service fittings, alarm, fan, work top, cupsink, and
base units must be ordered separately.
DEPTH
Overall
Hood
Length
Sash
Opening
Sq. Ft.
80
FPM
36"
...
251/2"
...
4'-0"/48"
5'-0"/60"
6'-0"/72"
8'-0"/96"
8.1
10.5
12.9
17.7
650
840
1040
1420
*Sash opening height above airfoil. Add 1" to calculate sash opening area.
Total CFM and Static Pressure
100
120
S.P.
FPM S.P.
FPM S.P.
0.15" 810 0.25" 980
0.20" 1050 0.30" 1260
0.25" 1290 0.40" 1550
0.15" 1770 0.25" 2130
0.35"
0.45"
0.60"
0.35"
Static pressures shown are for the pressure drop through the hoods only. The
total pressure drop through the hood and the duct system must be calculated
to select the proper exhaust fan.
General Purpose Bench Fume Hoods — Vertical Rising Sash
4'-0"
KS-05K5448
Auxiliary Air
5'-0"
6'-0"
8'-0"
KS-05K5460
KS-05K5472
KS-05K5496
End View
General Purpose fume hoods can be converted to Auxiliary Air Hoods by adding an Auxiliary Air Chamber. See page 7.
Restricted By-pass (for VAV exhaust systems)
General Purpose fume hoods may be converted to a Restricted By-pass model for use with VAV exhaust systems. See page 7.
2
Supreme Air LV Fume Hoods
REDISHIP
High Performance Bench Hood
Specifications
Supreme Air LV High Performance Bench Hoods are
furnished with Kewaunee’s Modified Epoxy Resin (KMER)
lining and unique interstitial, vertical slot baffles. Each
fume hood is complete with a Type 304 stainless steel
lower deflector vane, counterbalanced, self-closing (to
18"), frameless sash of 1/4" combination safety glass and
interior plumbing access panels. Hood exteriors are
fabricated of cold rolled steel, phosphate coated with a
baked chemical resistant, synthetic resin, light neutral color
finish. The exhaust duct collar is polyethylene, 1115/16" O.D.
Supreme Air LV High Performance Bench Hoods are not
designed for use with auxiliary air chambers.
Accessories Include: Two 120 volt AC 20 amp GFI
duplex receptacles,single-tube, T5, fluorescent light fixture
(tube included) with 20 amp light switch, and a motor rated fan
switch (thermal unit not provided). Devices are wired to
junction boxes mounted at the top exterior of the hood.
Optional Accessories: Each front post and interior end
liner is punched for up to five (5) remote control service
fittings.Service fittings, fan, work top, cupsink, and
base units must be ordered separately.
Additional Parts Required for
Complete Fume Hood Assembly
Work Top
page 11
Base Cabinets page 8
Service Fittings page 10
Cupsink
Fan/Blower
page 11
page 16
DIMENSIONS
Overall Demension
Work Top
Clearance (sash up)
Height
Length
Depth
893⁄4"
37"
103"
48" 60" 72"
39" 51" 63"
...
363⁄4"
24"
Airflow Requirements
Overall
Hood Width
Square Foot
Opening at 28"
Sash Opening *
4'-0"/48"
5'-0"/60"
6'-0"/72"
7.85
10.27
12.69
Square Foot
Opening at 18"
Sash Opening *
5.15
6.73
8.31
HIGH SETTING
100 FPM at 18"
66 FPM at 28"
CFM
SP
MEDIUM SETTING
84 FPM at 18"
55 FPM at 28"
CFM
SP
LOW SETTING
55 FPM at 18"
28" not recommended
CFM
SP
515
675
830
430
565
700
285
370
460
0.20
0.20
0.25
0.15
0.15
0.20
0.10
0.12
0.15
* Includes free area contributions from sash clearance spaces and bypass opening.
Static pressures shown are for the pressure drop through the hoods only. The total pressure drop through the hood and the duct system must be calculated to select the
proper exhaust fan.
High Performance Low Velocity Bench Fume Hoods — Self-closing Vertical Rising Sash
4'-0"
5'-0"
36 3/4 "
6'-0"
54"
89 3/4 "
35 3/4 "
97005-998
97006-000
97006-002
End View
3
Supreme Air Fume Hoods
General Purpose Walk-in Hood
Specifications
Designed to sit directly on the floor and use the laboratory
floor as the bottom work surface. Complete with
Kewaunee’s Modified Epoxy Resin (KMER) lining and
baffles, with fixed open middle, upper, lower, and center
exhaust slots. Each walk-in hood is furnished with two
counterbalanced, frameless sashes of 1/4" thick combination
safety glass; interior plumbing access panels; full length
sash handles; and a louvered top front panel. Hood
exterior made of cold rolled steel. Finish is light neutral
color. Polyethylene exhaust duct collar is 1115/16” O.D.
Accessories Include: Two 120 volt AC 20 amp GFI
duplex receptacles, single-tube, T5, fluorescent light fixture
(tube included) with 20 amp light switch, and motor rated
fan switch (thermal unit not provided). Devices are wired to
junction boxes mounted at the top exterior of the hood.
Optional Accessories: Each front post and interior end
liner is punched for remote control service fittings (5 left
side, 4 right side). The right hand post is punched for an
Air Alert 300 Alarm and is furnished with a cover plate.
Service fittings, alarm, and fan must be ordered
separately.
Additional Parts Required for
Complete Fume Hood Assembly
Service Fittings page 10
Fan/Blower
page 16
DIMENSIONS
HEIGHT
LENGTH
DEPTH
Overall Dimensions
Sash Opening
Work Floor
Clearance (sash up)
893/4"
28"*
...
103"
72"
64"
64"
...
36"
...
241/2"
...
* Upper sash opening height above lower sash. Add 1" in height to
calculate sash opening area.
Optional Kemresin Hood Floor is available by special
request. Contact your VWR furniture specialist for more
information.
Overall
Hood
Length
Sash
Opening
Sq. Ft.
6'-0"/72"
12.9*
80
FPM
Total CFM and Static Pressure
100
120
S.P.
FPM S.P.
FPM S.P.
1040 0.25" 1290 0.40" 1550 0.60"
* Includes Upper Sash Opening only and 1" opening below lower sash.
Static pressures shown are for the pressure drop through the hoods only. The
total pressure drop through the hood and the duct system must be calculated
to select the proper exhaust fan.
General Purpose Walk-in Fume Hoods — Vertical Rising Sash
6'-0"
KS-30K9072
End View
Auxiliary Air
General Purpose fume hoods can be converted to Auxiliary Air Hoods by adding an Auxiliary Air Chamber. See page 7
Restricted By-pass (for VAV exhaust systems)
General Purpose fume hoods may be converted to a Restricted By-pass model for use with VAV exhaust systems. See page 7.
4
Supreme Air Fume Hoods
Isotope Bench Hood
Specifications
Designed primarily for use with radiochemicals. Features
coved corner and seamless welded Type 304 stainless
steel work top with intersecting rear and interior end
panels for ease of cleaning and decontamination.
Complete with a Type 304 stainless steel lining and baffle,
with fixed center, upper, and lower exhaust slots.
Furnished with a Type 304 stainless steel lower deflector
vane; a counterbalanced, frameless sash of 1/4" laminated
safety glass; a full length sash handle; and a louvered top
front panel. Exterior fabricated of cold rolled steel. Finish
is light neutral color. Type 316 stainless steel exhaust duct
collar is 1115/16" O.D.
Accessories Include: Two 120 volt AC 20 amp GFI
duplex receptacles, single-tube, T5, fluorescent light fixture
(tube included) with 20 amp light switch, and a motor rated
fan switch (thermal unit not provided). Devices are wired
to junction boxes mounted at the top exterior of the hood.
Optional Accessories: Each front post and interior end
liner is punched for front load remote control service
fittings (5 left side, 4 right side). The right hand post is
punched for an Air Alert 300 Alarm and is furnished with a
cover plate. Service fittings, alarm, fan, and base units
must be ordered separately.
Additional Parts Required for
Complete Fume Hood Assembly
Base Cabinets page 8
Service Fittings page 10
DIMENSIONS
HEIGHT
Overall Dimensions 893/4" **
Sash Opening
28" *
Work Top
37" **
Clearance (sash up)
97" **
page 16
Fan/Blower
LENGTH
48"
40"
40"
...
60"
52"
52"
...
DEPTH
72"
64"
64"
...
36"
...
251/2"
...
*Sash opening height above airfoil. Add 1" to calculate sash opening area.
**Subtract 1" in height if wood base cabinets are used.
Type 304 Stainless Steel Linings: Interior fume hood lining
and baffles are 16-gauge, Type 304 stainless steel. The
seamless welded 14-gauge, Type 304 stainless steel work
top is dished 1/2" to retain spillage, and has an integrally
welded 5" diameter cupsink at the left rear. (Work tops are
not available with vent holes for use with acid storage
base cabinets.)
Overall
Hood
Length
Sash
Opening
Sq. Ft.
4'-0"/48"
5'-0"/60"
6'-0"/72"
8.1
10.5
12.9
Total CFM and Static Pressure
80
100
120
FPM S.P.
FPM S.P.
FPM S.P.
not recommened 810 0.25" 980 0.35"
not recommened 1050 0.30" 1260 0.45"
not recommened 1290 0.40" 1550 0.60"
Static pressures shown are for the pressure drop through the hoods only. The
total pressure drop through the hood and the duct system must be calculated
to select the proper exhaust fan.
Isotope Bench Fume Hoods — Vertical Rising Sash
4'-0"
KS-20S5448
Auxiliary Air
5'-0"
6'-0"
KS-20S5460
KS-20S5472
End View
Isotope fume hoods can be converted to Auxiliary Air Hoods by adding an Auxiliary Air Chamber. See page 7.
Restricted By-pass (for VAV exhaust systems)
General Purpose fume hoods may be converted to a Restricted By-pass model for use with VAV exhaust systems. See page 7.
5
Supreme Air Fume Hoods
Perchloric Acid Bench Hood
Specifications
Designed primarily for use with perchloric acid. Features
coved corner and seamless welded Type 316 stainless
steel work top with intersecting rear and interior end
panels for ease of cleaning and decontamination.
Complete with a Type 316 stainless steel lining and baffle,
with fixed center, upper, and lower exhaust slots.
Furnished with a Type 304 stainless steel lower deflector
vane; a counterbalanced, frameless sash of 1/4" laminated
safety glass; a full length sash handle; and a louvered top
front panel. A full length perforated spray pipe is located
behind the top baffle to simplify periodic washdown
procedures. Exterior fabricated of cold rolled steel. Finish
is light neutral color. Type 316 stainless steel exhaust duct
collar is 1115/16" O.D.
Accessories Included: Two front loaded remote controlled
service fittings (one cold water, one wash-down water),
two 120 volt AC 20 amp GFI duplex receptacles, vaporproof light fixture(s) (bulbs not included) with 20 amp light
switch, and a motor rated fan switch (thermal unit not
provided). Devices are wired to junction boxes mounted
at the top exterior of the hood.
Optional Accessories: The right hand post is punched for
an Air Alert 300 Alarm and is furnished with a cover plate.
Alarm, fan, and base units must be ordered separately.
Additional Parts Required for
Complete Fume Hood Assembly
Base Cabinets
page 8
page 16
Fan/Blower
Note: Only steel base cabinets are recommended for
use under perchloric acid fume hoods.
DIMENSIONS
Overall Dimensions
Sash Opening
Work Top
Clearance (sash up)
HEIGHT
893/4"
28" *
37"
97"
LENGTH
48"
40"
40"
...
60"
52"
52"
...
DEPTH
72"
64"
64"
...
36"
...
251/2"
...
*Sash opening height above airfoil. Add 1" to calculate sash opening area.
Type 316 Stainless Steel Linings: Interior fume hood lining
and baffle are 16-gauge, Type 316 stainless steel. The
seamless welded 14-gauge, Type 316 work top is dished
1/2" to retain spillage and has an integrally welded trough
sink at the rear. (Work tops are not available with vent
holes for use with acid storage base cabinets).
Overall
Hood
Length
Sash
Opening
Sq. Ft.
4'-0"/48"
5'-0"/60"
6'-0"/72"
8.1
10.5
12.9
Total CFM and Static Pressure
80
100
120
FPM S.P.
FPM S.P.
FPM S.P.
not recommened not recommened 980 0.35"
not recommened not recommened 1260 0.45"
not recommened not recommened 1550 0.60"
Static pressures shown are for the pressure drop through the hoods only. The
total pressure drop through the hood and the duct system must be calculated
to select the proper exhaust fan.
Perchloric Acid Bench Fume Hoods — Vertical Rising Sash
4'-0"
KS-25L5448
Auxiliary Air
5'-0"
6'-0"
KS-25L5460
KS-25L5472
End View
Perchloric Acid fume hoods can be converted to Auxiliary Air Hoods by adding an Auxiliary Air Chamber. See page 7.
Restricted By-pass (for VAV exhaust systems)
General Purpose fume hoods may be converted to a Restricted By-pass model for use with VAV exhaust systems. See page 7.
6
Supreme Air Fume Hoods
Auxiliary Air Chambers
Specifications
Auxiliary Air Chambers may be added to the top of any
Supreme Air Fume Hood in this catalog to convert them to
Auxiliary Air fume hoods. Adding the auxiliary air chamber
makes it possible for the fume hood to operate on up to
70% auxiliary air, thus saving expensive conditioned room
air from being exhausted. No modifications to the fume
hood are required, and the chamber comes complete with
all necessary parts to make the conversion, except fan
and duct work. The chambers are fabricated of cold rolled
steel. Finish is light neutral color.
Bench and Walk-In Fume Hood
Auxiliary Air Requirements
(based on 70% of hood air requirements)
Overall Hood
Length
80 FPM
4'-0" / 48"
5'-0" / 60"
6'-0" / 72"
8'-0" / 96"
460
590
730
990
Total CFM and Static Pressure
S.P. 100 FPM S.P. 120 FPM S.P.
0.15" 570
0.15" 740
0.15" 900
0.15" 1240
0.25" 690
0.25" 880
0.25" 1090
0.25" 1490
0.35"
0.30"
0.30"
0.30"
Auxiliary Air Chambers for Bench and Walk-In Fume Hoods
4'-0"
5'-0"
6'-0"
8'-0"
CF5-1348-03
CF5-1360-03
CF5-1372-03
CF5-1396-03
End View
Restricted By-pass Fume Hoods
Fume Hoods using a Variable Air
Volume (VAV) exhaust system require
a by-pass restrictor to obstruct the
airflow through the upper by-pass.
The By-pass Restrictor Kit include: a
restricting panel, mounting angles,
and all hardware required for
mounting in the field.
Contact your sales representative
concerning special restriction
requirements.
Restrict By-pass Kit for VAV Exhaust Systems
4'-0"
CF5-1348-03
5'-0"
CF5-1360-03
6'-0"
CF5-1372-03
8'-0"
CF5-1396-03
7
Fume Hood Base Cabinets
REDISHIP
General Storage Fume Hood Base Cabinets
Specifications
Steel Fume Hood Base Cabinets
are 353/4" high and 22" deep, lengths
as shown below. They are available in
two styles. Contour style features
doors and drawer heads with a
radiused full-width integral pull.
Trademark style features doors and
drawers with an aluminum bail-type
pull. Both styles are furnished with
removable backs and are finished in
Light Neutral color.
Contour Style Steel Cabinets
CFG-2084-0F2
CFG-2085-0F2
CFG-2086-0F2
CFG-2088-0F2
CFG-2089-0F2
24"L
30"L
36"L
48"L
60"L
Acid Storage Fume Hood Base Cabinets
Specifications
Acid Storage Fume Hood Base
Cabinets are specifically designed for
the storage of corrosive chemicals.
They are available in either steel or
wood. These cabinets are lined with a
molded one piece linear low density
polyethylene tub with coved corners
and a 1" lip at the bottom front. The
cabinet doors are lined with 1/8" sheet
polyethylene and the doors are
latched using a nylon roller catch.
Each cabinet is furnished with a PVC
vent pipe for venting to the fume hood
above. (Requires a 2" hole in the
hood worksurface).
Vent Location:
30" Cabinet – 75/8" Right of Center
36" Cabinet – 5" Right of Center
48" Cabinet – 5" Right of Center
Contour Style Steel Cabinets
CFG-ACID-301
CFG-ACID-361
CFG-ACID-481
30"L
36"L
48"L
Contour Style Vacuum Pump Storage Fume Hood Cabinets
Specifications
KSG35M3724L3 24"L Left Swing
KSG35M372403 24"L Right Swing
8
Vacuum Pump Storage Fume Hood
Cabinets are designed without a
bottom to allow vacuum pumps and
other equipment to be rolled in or out
of the cabinets. The interior is lined
with 1" thick neoprene foam for
sound deadening and easy cleaning.
Each cabinet is furnished with a 120
VAC, 20 amp, duplex receptacle
mounted on the inside cabinet back
and a pilot-lighted toggle switch
mounted in the top front rail. (Wiring
is not included). Cabinets are also
furnished with a 2" diameter PVC
vent pipe for venting or access to the
hood above. (Requires a 2" hole in
the hood worksurface to be bored at
time of installation). The toespace rail
is attached to the door to allow total
access to the cabinet. Cabinet inside
clearance at the floor is 161/2" frontto-back and 3" less than the overall
cabinet length.
Fume Hood Base Cabinets
REDISHIP
Solvent Storage Fume Hood Cabinets
Specifications
Solvent Storage Cabinets are specifically designed for the storage of
flammable and combustible liquids.
The cabinet is UL listed and meets
UFC, OSHA and NFPA No. 30-1993
construction standards. It is all 18gauge steel, double panel construction with self-closing doors, synchronized
so that both doors will always fully
close. The right hand door is equipped
with a three-point latching system
that automatically engages the
cabinet frame. Each door is equipped
with a fusible-link hold-open feature
that ensures the doors close should
the temperature outside the cabinet
exceed 165°F. A 2" deep liquid-tight
pan covers the entire bottom to contain
liquid leaks and spills. A full depth
adjustable shelf, perforated to allow
circulation within the cabinet, is also
furnished. Two diametrically opposed
vents with spark screens as well as a
grounding screw are provided in the
back of the cabinet. The cabinet is
labeled: CAUTION FLAMMABLE –
KEEP FIRE AWAY.
Steel Solvent Storage Fume Hood Cabinets
CFG-SOLV-301
CFG-SOLV-361
CFG-SOLV-481
30"L
36"L
48"L
Vent outlets
are 11/2"
Male NPT
9
Fume Hood Service Fittings
Specifications
Standard Remote Control Fittings
are for use on General Purpose fume
hoods and may be used on either
side of the hood. They include brass
valve with replaceable seat, Nylon
color-coded panel flange with angle
serrated hose connector or
gooseneck with sepia bronze finish,
plastic color-coded four arm handle,
and tank nipple, locknut, and washer.
Standard fittings also include remote
control rod assembly and black
plastic angle flange.
Front Load Remote Control Fittings
are for use on Isotope hoods. They
must be ordered for use on either the
left or right side of the hood.
Service Fitting Color Codes:
Air . . . . . . . . . . . . . . . . . . . .Orange
Cold Water . . . . . . . . . .Dark Green
Distilled Water . . . . . . . . . . . .White
Gas . . . . . . . . . . . . . . . . .Dark Blue
They include brass valve with
replaceable seat, Nylon color-coded Nitrogen . . . . . . . . . . . . . . . .Brown
panel flange with angle serrated hose Vacuum . . . . . . . . . . . . . . . . .Yellow
connector or gooseneck with sepia
bronze finish, plastic color-coded
four arm handle, and tank nipple,
locknut, and washer.
Standard Remote Control Fittings (for use on General Purpose Fume Hoods)
Panel Flange with
Angle Serrated Hose Connector
VFT-0860-3A Air
VFT-0860-3G Gas
VFT-0860-3N Nitrogen
VFT-0860-3V Vacuum
VFT-0861-3W Cold Water
VFT-0862-3D Distilled Water
Cold Water Gooseneck
with Vacuum Breaker
VFT-0864-3WV 273/4" Long Handle
121/2" Long Handle
Front Load Remote Control Fittings (for use on Isotope Fume Hoods)
Nylon Panel Flange with
Angle Serrated Hose Connector
Nylon Panel Flange with
Angle Serrated Hose Connector
Left Hand Fittings
VFT-0739-L-AIR
VFT-0739-L-GAS
VFT-0739-L-NIT
VFT-0739-L-VAC
VFT-0739-L-CW
VFT-0739-L-FD
Right Hand Fittings
VFT-0739-R-AIR
VFT-0739-R-GAS
VFT-0739-R-NIT
VFT-0739-R-VAC
VFT-0739-R-CW
VFT-0739-R-FD
10
Air
Gas
Nitrogen
Vacuum
Cold Water
Distilled Water
Air
Gas
Nitrogen
Vacuum
Cold Water
Distilled Water
Cold Water Gooseneck
with Vacuum Breaker
VFT-0740-L-VB Left Hand Fitting
Fume Hood Work Tops & Accessories
Kemresin Supreme Air Fume Hood Work Tops (color: Black)
4'-0"
5'-0"
6'-0"
for VWR hood
for VWR hood
VF5-0204-A1 KS-05K5448
97005-992
97005-998
VF5-0205-A1 KS-05K5460
97005-994
97006-000
VF5-0206-A1
97005-996
8'-0"
for VWR hood
for VWR hood
KS-05K5472
97006-002
VF5-0208-A1 KS-05K5496
for VWR hood
for VWR hood
VF5-0204-A8 KS-05K5448
VF5-0205-A8 KS-05K5460
VF5-0206-A8
for VWR hood
for VWR hood
KS-05K5472
VF5-0208-A8 KS-05K5496
with 2" dia. vent hole for
use with 48" vented acid
storage fume hood base
cabinet.
with 2" dia. vent hole for
use with 30" vented acid
storage fume hood base
cabinet located on right
side of hood.
with 2" dia. vent hole for
use with 36" vented acid
storage fume hood base
cabinet located on right
side of hood.
with 2" dia. vent hole for
use with 48" vented acid
storage fume hood base
cabinet located on right
side of hood.
Cupsink Cutout Cover
VFR-5405-CP
Molded of black Kemresin. Designed
to fill cupsink cutout in work top when
a cupsink is not required.
Included with all fume hood work
tops shown above.
Air Alert 300 Face Velocity Airflow Alarm
VFX-0185-28
Consists of a thermistor sensor mounted through the end wall of the hood,
and a control monitor that gives both a
visual and audible alarm. The alarm
monitors the fume hood face velocity
and sounds an alarm when the airflow
falls below safe levels. A glowing
green light signals when conditions
are again safe. The control monitor,
which is mounted on the hood fascia,
also contains a test/reset button that
allows the hood user to verify alarm
readiness.
The Air Alert 300 operates on a 9 volt
DC circuit and comes complete with
an adapter that can be plugged into
any 120 VAC receptacle.
Air Alert 300 not recommended for use with Auxiliary Air Fume Hoods
Air Alert 300 not for use with Supreme Air LV High Performance Fume Hoods
11
Fume Hood Wiring & Piping
Specifications
All Supreme Air Fume Hoods shown
in this catalog are pre-wired at the
factory. The light fixture, receptacles,
and light switch are wired to a single
junction box located at the top of the
hood for a single point connection at
the job site. An auxiliary receptacle is
furnished on the top of the hood next
to the junction box to provide power
to the optional airflow alarm.The fan
switch is wired to a seperate junction
box on the top of the hood. All wiring
uses flexible metallic conduit and is
UL listed.
All service fittings and plumbing
ordered with the hood are shipped
seperate for installation by the
plumber (except on the Perchloric
Acid fume hood). No service piping
or drain lines are furnished.
Typical Fume Hood with Plumbing & Wiring Connections
Fan Junction Box
Main Junction Box
furnished and wired
to fan switch
furnished and wired
to light, receptacles,
and light switch
Auxiliary Receptacle
furnished and wired
to main junction box
Fan Switch
furnished and wired
to fan junction box
Light Switch
furnished and wired
to main juction box
GFI Duplex
furnished and wired
to main junction box
(one each side)
Service Fittings and Valves
furnished seperately
when ordered
installed by others
(typical for both sides of hood)
Supply Lines with Shut-off Valves
supplied and connected by others
12
Waste Line - Trap - Tailpiece
supplied and connected by others
Supreme Air Fume Hood Technical Data
Bench Hood – Dimensional Information
Vertical Section
General Purpose Bench Hoods
Rough-In for General Purpose Bench Hoods
36"
1 1/2 "
22" 20"
5 1/2"
9 1/2"
EQ
2"
89 3/4 "
28" Sash Opening
Pipe Space Below Work Top
Plumbing Access (both sides)
1/2 Hood Length
EQ
11"
97" Clearance – Sash Up
5"
54"
4"
4"
29 1/2 "
4"
4"
5"
25 1/2 "
84"
8"
1"
2 1/2 "
7"
35 3/4 "
36"
11 15/16 " O.D.
Exhaust Collars
22"
96" – 120" – 144"
8"
Supreme Air LV Fume Hood – Rough-In & Dimensional Information
Rough-In for Supreme Air LV Bench Hoods
Vertical Section
Supreme Air LV Bench Hood
13
Supreme Air Fume Hood Technical Data
Isotope Hood – Rough-In & Dimensional Information
Rough-In for Isotope Bench Hood
Vertical Section
Isotope Bench Hood
36"
1 1/2 "
22" 20"
89 3/4 "
28" Sash Opening
97" Clearance – Sash Up
5"
54"
4"
4"
29 1/2 "
4"
4"
5"
25 1/2 "
84"
8"
2 1/2 "
35 3/4 "
22"
8"
Perchloric Acid Hood – Rough-In & Dimensional Information
Rough-In for Perchloric Acid Hood
Vertical Section
Perchloric Acid Bench Hood
36"
1"
4 3/4"
9 1/2"
1 1/2 "
7"
22" 20"
36"
89 3/4 "
28" Sash Opening
97" Clearance – Sash Up
5"
54"
16"
29 1/2 "
5"
25 1/2 "
84"
8"
2 1/2 "
35 3/4 "
22"
14
8"
Supreme Air Fume Hood Technical Data
Walk-In Hood – Dimensional Information
Vertical Section
General Purpose Walk-In Hoods
Rough-In for General Purpose Walk-In Hoods
1 1/2 "
89 3/4 "
28"
Upper Sash Opening
5"
60 3/4 " Total Sash Opening
103" Clearance – Sash Up
22" 20"
4"
4"
29 1/2 "
4"
4"
5"
25 1/2 "
84"
38 1/4 "
43 3/4 "
36"
Auxiliary Air Chamber – Rough-In & Dimensional Information
Rough-In for Auxiliary Air Chamber
Vertical Section
Auxiliary Air Chamber on Bench Hood
15
Fume Hood Exhaust Systems
Determining Fume Hood Exhaust and Supply Requirements
All fume hoods, regardless of type or
use, require a fan/blower to exhaust
the air from the hood to outside
atmosphere. Typically mounted on the
building roof, the fan/blower also
requires a duct system to connect it to
the hood, and a stack head to exhaust
the contaminated air above the
building’s fresh air intakes.
In addition, if the fume hood uses an
auxiliary air chamber, a second
supply fan/blower is also required
along with a seperate duct system.
Your VWR Furniture Specialist can
provide more information and help
with the exhaust/supply system
design.
Because of the many factors involved
with designing a fume hood
exhaust/supply system, it is
recommended that you contact an
HVAC professional as well, who is
experienced with laboratory fume
hood exhaust requirements and is
knowledgeable of local mechanical
and electrical building codes.
For more information contact you VWR Furniture Specialist — 1-888-624-2432
16
Supreme Air Fume Hood Construction
Supreme Air Fume Hood Technical Data
The Supreme Air Fume Hood design is based on rigid
frame construction that assures solid installation and
low vibration and sound levels. Access panels are
easily removable to access service lines and fittings.
Radius corner posts and airfoils, plus fixed interior baffle
settings assure a high level of comfort, safety and
efficiency.
Supreme Air Fume Hood Wiring Diagram
With a variety of models available and selected option
packages, this new generation of fume hoods can be
tailored to the application needs of your modern laboratory.
Aesthetically pleasing curved airfoils, contemporary
controls and devices, and an eye-pleasing light neutral
color, make this hard-working laboratory safety device
an attractive part of the total laboratory environment.
Excellent interior lighting
• Single tube, low profile,T5
fluorescent light fixture
• Tube replacement from
outside of hood
KMER modified
epoxy resin liner
• 1/4" thick, solid, light
neutral colored liner
• Class A fire rating
• Low profile, self-gasketing,
interior access panel —
removable without tools
• Stainless steel liner for
Isotope and Perchloric Acid
Hoods
Customizable accessory
offerings
• A full array of service
fittings
• Monitoring safety alarm
available
Prewired light and
receptacles
• UL listed per UL 3101-1
1993
Low profile PVC sash tracks
• Smooth sash operation
• Reduced air turbulence
• Seals the interior side panel
Easy-to-operate full vision
sash with:
• Full length painted
aluminum handle for neat,
clean appearance and
streamlined air features
• Exclusive sash leveling and
alignment features
Independent frame
construction
• Rigid structural frame
• Allows liner panel
replacement
• Stainless steel fasteners
concealed with corrosionresistant caps
Narrow-radiused corner
posts
• Enhances aerodynamic air
flow
• 4" width creates more
interior work space
Radiused air foil
• Streamline air flow
— low turbulence
• Heavy gauge stainless
steel for durability
Exclusive Kemresin work
tops
• Dished black epoxy resin
worksurface available
• Integral stainless steel
worksurface in Isotope and
Perchloric Acid hoods
Specialized base cabinets
• UL listed solvent storage
cabinets
• One-piece polyethylene
lined acid storage cabinets
• Vacuum pump storage
cabinets
• Cabinets available in both
wood and steel
SQUARE D THERMAL UNIT SIZING
The fan switch requires the installation of a Square D Thermal unit to function. The thermal unit is not supplied with the
switch as it must be selected based on the full load amperage of the fan motor.
Motor Full-load
Current Amperes
0.41 - 0.44
0.45 - 0.49
0.50 - 0.53
0.54 - 0.58
0.59 - 0.65
0.66 - 0.71
0.72 - 0.78
0.79 - 0.85
0.86 - 0.96
0.97 - 1.04
1.05 - 1.16
Thermal
Unit No.
A .49
A .54
A .59
A .65
A .71
A .78
A .86
A .97
A 1.02
A 1.16
A 1.25
Motor Full-load
Current Amperes
1.17 - 1.29
1.30 - 1.37
1.38 - 1.47
1.48 - 1.56
1.57 - 1.65
1.66 - 1.79
1.80 - 1.95
1.96 - 2.15
2.16 - 2.38
2.39 - 2.75
2.76 - 2.84
Thermal
Unit No.
A 1.39
A 1.54
A 1.63
A 1.75
A 1.86
A 1.99
A 2.15
A 2.31
A 2.57
A 2.81
A 3.61
Motor Full-load
Current Amperes
2.85 - 3.06
3.07 - 3.45
3.46 - 3.70
3.71 - 4.07
4.08 - 4.32
4.33 - 4.90
4.91 - 5.35
5.36 - 5.85
5.86 - 6.41
6.42 - 6.79
6.80 - 7.57
Thermal
Unit No.
A 3.95
A 4.32
A 4.79
A 5.30
A 5.78
A 6.20
A 6.99
A 7.65
A 8.38
A 9.25
A 9.85
Motor Full-load
Current Amperes
7.58 - 8.15
8.16 - 8.98
8.99 - 9.67
9.68 - 9.95
9.96 - 10.8
10.9 - 12.1
12.2 - 13.1
13.2 - 13.9
14.0 - 15.0
15.1 - 16.0
Thermal
Unit No.
A 11.0
A 11.9
A 13.2
A 14.1
A 14.8
A 16.2
A 17.9
A 19.8
A 21.3
A 25.2
VWR Furniture
Complete Dedicated Furniture Solutions
Factory trained VWR Furniture Specialists work in
coordination with VWR sales representatives to
help you select the most functional and costeffective solutions for your lab. They will closely
monitor inventory of top-quality furniture and
components, as well as provide complete project
supervision from proposal through installation.
• VWR Furniture Project Estimators help you
identify your lab furniture requirements and
provide a comprehensive quote of your project’s
cost
• VWR Furniture Design Specialists create lab
plans to suit your specifications using the latest
computer aided design (CAD) software
• VWR Project Coordinators manage every detail
including ordering, shipping, and final installation
• VWR Furniture Installers have extensive
experience and knowledge of our product line,
insuring a fast, trouble-free finish to your project
To learn more about VWR Furniture Products,
Services, and Customer Support visit vwr.com
today!
0811 (10M) Lit. No. 11030
KEWAUNEE
Supreme Air Series
Fume Hoods