Hardware - Mazzella Companies

Transcription

Hardware
Mazzella Lifting Technologies
Progressive Crane
Mazzella Crane Service
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.mazzellalifting.com
www.progressivecrane.com
www.mazzellacraneservice.com
www.induscowire.com
Indusco Wire Rope & Supplies
354
MazzellaCatalog13_Hardware.indd 354
7/3/13 9:40 AM
Overhead
Cranes / Jibs
Rigging & Lifting Hardware
Hoists
We offer one of the largest and most complete inventories
of rigging and lifting products in the country from some
of the largest manufactures in the world.
Some of the products we stock are:
Services
Hoist rings—standard and metric
Shackles—all types, sizes and finishes from
1/4 ton to over 1,000 tons
Master rings / links—all sizes, types and finishes
Hooks—swivel, eye, choker, self-locking and weld-on
Turnbuckles and swivels
Engineered
Products
■
■
■
■
■
We also stock many other rigging hardware items. If you
can’t find a standard item to meet your specific needs,
inquire about custom rigging and lifting hardware.
J Henry Holland
Alabama Sling Center
Tennessee Sling Center
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 901-345-8918 (Memphis)
Phone: 205-345-4701
www.jhenryholland.com
www.alabamaslingcenter.com
Phone: 423-634-9005 (Chattanooga)
www.kcicraneservice.com
www.tennesseeslingcenter.com
KCI Crane Service
Fall
Protection
Contractors
Supply
Load
Securement
Cordage
Wire
Rope
Lifting
Products
Hardware
Slings
All hardware products meet the ASME B30.26 specification.
355
7/3/13 9:40 AM
Rigging Hardware Index
Warning Elements..........................................357
Screw Pin Anchor Shackles...........................358
Screw Pin Chain Shackles.............................359
Round Pin Anchor Shackles...........................360
Round Pin Chain Shackles.............................361
Alloy Screw Pin Shackles...............................362
Screw Pin Wide Body Shackles.....................363
Bolt Type Anchor Shackles.............................364
Bolt Type Chain Shackles...............................365
Alloy Bolt Type Shackles................................366
Wide Body Shackles......................................367
Theatrical Shackles........................................368
Midland Anchor Shackles...............................369
Midland Chain Shackles.................................370
Alloy Sheet Pile Shackles...............................371
Sheet Pile Shackle Ground Release..............371
Alloy Towing Shackles....................................372
Galvanized Bolt Type Chain Shackles............372
Stainless Steel Shackles................................373
Design-A-Shackle...........................................373
Swivel Hoist Rings..........................................374
UNC Swivel Hoist Rings.................................375
Metric Swivel Hoist Rings...............................376
Heavy Lift Swivel Hoist Rings.........................377
Safety Engineered Hoist Rings......................378
Heavy Duty® Hoist Rings................................378
Side Pull Hoist Rings......................................379, 380, .
.................................................................381
E-Z® Torque Hoist Rings.................................379
Stainless Steel Safety Hoist Rings ................380
Safety Swivel Hoist Rings .............................380
Traditional Center Pull Hoist Rings ................381
Shackle-LokTM Hoist Ring...............................381
Load Rings: Bolted & Welded.........................382 - 386
Malleable Clips—Zinc Plated.........................387
Alloy Pear Shaped Links................................388
Weldless Sling Links.......................................388
Weldless End Links........................................389
Weldless Rings...............................................389
Alloy Master Links..........................................390
Open Pear Master Links.................................391
Wide Master Links .........................................392
Design-A-Link.................................................393
Standard Wire Rope Thimbles.......................394
Extra Heavy Wire Rope Thimbles..................394
Open Pattern Wire Rope Thimbles.................395
Solid Wire Rope Thimbles..............................395
Special Thimbles............................................396 - 397
Boom Pendant Thimbles................................398
Special Thimbles—Stainless Steel.................399
SHUR-LOC® Swivel Hooks.............................400
Eye Hooks......................................................401
Swivel Hooks..................................................402
Chain / Regular Swivels.................................403
Jaw End Swivels............................................404
Tapered Roller Thrust Bearing Swivels..........405 - 406
Angular Contact Bearing Swivels...................407
Sliding Choker Hooks.....................................408
Snap Hooks....................................................408
Replacement Hooks.......................................408
Sorting Hooks.................................................408
Barrel Hooks...................................................408
Eye Grab Hooks.............................................409
Clevis Grab Hooks.........................................409
Eye Slip Hooks...............................................410
Clevis Slip Hooks...........................................410
Golden Gate® Hooks (Bullard)........................411 - 412
Hook Data Form.............................................413
Weld-On Excavator Hooks.............................414
Eye Type Self-Locking Hooks.........................414
Swivel Bronze Bushing
Self-Locking Hooks..................................415
Weld-On Pivot Link.........................................415
Shank Hooks..................................................416
Design-A-Crane Hook....................................417
Standard Alloy J-Hooks..................................418
Design-A-J-Hook............................................419
Latch Kits........................................................420 - 424
Turnbuckles....................................................425 - 429
Turnbuckle Data.............................................430 - 431
STARPOINT Eye Bolts...................................432
Forged Eye Bolts............................................433
Metric Eye Bolts.............................................434
Stainless Steel Eye Bolts...............................434
Regular Nut Eye Bolts....................................435
Shoulder Nut Eye Bolts..................................436
Stainless Steel Swivels & Links......................437 - 438
Stainless Steel Turnbuckles...........................439
G-Link™ Sling Connector...............................440
Proof Coil Chain—Grade 30...........................441,
.................................................................446 - 447
Carbon Chains...............................................442 - 445
Grade 30 / Winch Hooks................................445
Lockdown Chain.............................................447
Weldless Chain...............................................448
Clevis Links....................................................449, 450
Quick Link.......................................................450
Repair Link.....................................................450
Cold Shut........................................................451
Welded Ring...................................................451
S Hooks..........................................................451, 452
Snap Links......................................................452
Double Clevis—Twin Link...............................452
Replacement Links.........................................453
Warnings
Product Warnings...........................................454 - 461
For the complete catalog index,
refer to the front of the book.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
356
7/3/13 9:40 AM
In our warnings, a “signal word” is used to attract
attention of the user to the warning. As indicated below,
another purpose of the signal word is to identify the
level of risk or hazard involved. Sometimes, the signal
word will be accompanied by a “safety alert symbol,”
such as an exclamation point inside a triangle. The signal
word will always appear within a box or panel separated
from the remainder of the warning by a border and, in some
cases, may have a contrasting background color, such as
red, orange or yellow. The majority of our warnings use
the signal words:
4.
WARNING
An “Instruction Statement,” such as “PREPARE
WIRE ROPE TERMINATION ONLY AS
INSTRUCTED.” This statement is meant to
inform or remind the user of the proper
steps or procedures for using the product
safely and avoiding the hazard.
This indicates a potential hazardous situation which
could result in some probability of serious injury or death.
Slings
This indicates a situation in which a hazard is
imminent and will result in a high probability of
serious injury or death.
Hardware
3. A “Consequence Statement,” such as “FAILURE
TO FOLLOW APPLICATION INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.” This
statement is meant to inform or remind the user
that failure to avoid the hazard can have harmful
consequences.
Engineered
Products
DANGER
Lifting
Products
A “Hazard Statement,” such as “FAILURE TO USE
TACKLE BLOCK CORRECTLY MAY CAUSE LOAD
TO SLIP OR FALL.” This statement is meant to
inform or remind the user of factors involved in the
task or work environment that can create a hazard.
CAUTION
This indicates a potential hazardous situation which
could result in minor injury or moderate injury.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
Our warnings use these signal words for alerting
product users to potential hazards, which can
result in personal injury or death. For hazards involving
potential damage to property, we use other signal
words, such as “IMPORTANT” or “NOTICE.”
Wire
Rope
2.
Cordage
A “Signal Word,” such as “DANGER”, “WARNING”
or “CAUTION.” This word is meant to attract the
attention of the user to the warning statement. The
signal word also identifies the degree of potential
danger or risk in using the product.
Load
Securement
1.
Overhead
Cranes / Jibs
Let’s turn to the basic elements and formats of our warnings.
In most of our warnings, four basic elements or types of
information are provided:
Hoists
Signal Words
Services
Warning Elements
357
7/3/13 9:40 AM
G-209 / S-209 Screw Pin
Anchor Shackles
G-209 Screw pin anchor shackles meet the performance
requirements of Federal Specification RR-C-271F Type IVA,
Grade A, Class 2, except for those provisions required of
the contractor.
■
■
■
■
■
■
■
■
■
■
■
■
Capacities 1/3 thru 55 metric tons, grade 6.
Forged - Quenched and Tempered, with alloy pins.
Working Load Limit and grade “6”
permanently shown on every shackle.
Hot Dip galvanized or Self Colored.
Fatigue rated.
Shackles 25t and larger are RFID EQUIPPED.
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds
or other certification. Charges for proof testing
and certification available when requested at the
time of order.
Approved for use at -40°C (-40°F) to
204°C (400°F).
2t through 25t bow and screw pin are Certified to
meet charpy impact testing of 42 joules (31 ft.-Ibs.)
min. ave. at -20°C (-4°F).
All shackles are Quenched and Tempered and can
meet DNV impact requirements of 42 joules (31 ft.-Ibs.) at -20°C (-4°F).
Meets or exceeds all requirements of ASME B30.26.
Type Approval and certification in accordance with
ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
Nominal
Size
in.
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/2
Working
Stock
Load
No.
Limit
t*
G-209 S-209
1/3
1/2
3/4
1
1-1/2
2
3-1/4
4-3/4
6-1/2
8-1/2
9-1/2
12
13-1/2
17
25
35
55
1018357
1018375
1018393
1018419
1018437
1018455
1018473
1018491
1018516
1018534
1018552
1018570
1018598
1018614
1018632
1018650
1018678
■
■
Crosby 2t through 25t G209 anchor shackles are type approved to DNV Certification Notes 2.7-1 - Offshore Containers. These Crosby shackles are statistical proof and impact tested. The tests are conducted by Crosby and 3.1 test certification is available upon request.
Look for the Red Pin®…the mark of genuine
Crosby quality.
Weight
Each
–
1018384
1018400
1018428
1018446
1018464
1018482
1018507
1018525
1018543
1018561
1018569
1018605
1018623
1018641
1018669
1018687
lbs.
.06
.10
.19
.31
.38
.72
1.37
2.35
3.62
5.03
7.41
9.50
13.53
17.20
27.78
45.00
85.75
Dimensions
(in.)
A
.38
.47
.53
.66
.75
.81
1.06
1.25
1.44
1.69
1.81
2.03
2.25
2.38
2.88
3.25
4.13
B
.25
.31
.38
.44
.50
.63
.75
.88
1.00
1.13
1.25
1.38
1.50
1.63
2.00
2.25
2.72
C
.88
1.13
1.22
1.44
1.69
1.88
2.38
2.81
3.31
3.75
4.25
4.69
5.25
5.75
7.00
7.75
10.50
D
.19
.25
.31
.38
.44
.50
.63
.75
.88
1.00
1.16
1.29
1.42
1.54
1.64
2.08
2.71
E
.60
.78
.84
1.03
1.16
1.31
1.69
2.00
2.28
2.69
2.91
3.25
3.63
3.88
5.00
5.75
7.25
F
.56
.61
.75
.91
1.06
1.19
1.50
1.81
2.09
2.38
2.69
3.00
3.31
3.63
4.19
4.81
5.69
G
.98
1.28
1.47
1.78
2.03
2.31
2.94
3.50
4.03
4.69
5.16
5.75
6.38
6.88
8.86
9.97
12.87
H
1.47
1.84
2.09
2.49
2.91
3.28
4.19
4.97
5.83
6.56
7.47
8.25
9.16
10.00
12.34
13.68
17.84
L
.16
.19
.22
.25
.31
.38
.44
.50
.50
.56
.63
.69
.75
.81
1.00
1.22
1.38
M
1.14
1.43
1.71
2.02
2.37
2.69
3.34
3.97
4.50
5.13
5.71
6.25
6.83
7.33
9.06
10.35
13.00
P
.19
.25
.31
.38
.44
.50
.69
.81
.97
1.06
1.25
1.38
1.50
1.62
2.25
2.40
3.13
Tolerance
+/C
A
.06
.06
.06
.13
.13
.13
.13
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.13
.13
.13
.13
.13
*Note: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
358
7/3/13 9:40 AM
Overhead
Cranes / Jibs
Chain Shackles
1/2
3/4
1
1-1/2
2
3-1/4
4-3/4
6-1/2
8-1/2
9-1/2
12
13-1/2
17
25
35
55
1019150
1019178
1019196
1019212
1019230
1019258
1019276
1019294
1019310
1019338
1019356
1019374
1019392
1019418
1019436
1019454
1019169
1019187
1019203
1019221
1019249
1019267
1019285
1019301
1019329
1019347
1019365
1019383
1019409
1019427
1019445
1019463
lbs.
.11
.17
.28
.43
.59
1.25
2.63
3.6
4.75
6.75
9.06
11.63
15.95
26.75
42.31
71.75
A
.47
.53
.66
.75
.81
1.06
1.25
1.44
1.69
1.81
2.03
2.25
2.38
2.88
3.25
4.12
B
.31
.38
.44
.50
.63
.75
.88
1.00
1.13
1.25
1.38
1.50
1.63
2.00
2.25
2.75
Engineered
Products
C
.25
.31
.38
.44
.50
.63
.81
.97
1.00
1.25
1.38
1.50
1.62
2.12
2.36
2.63
D
.25
.31
.38
.44
.50
.63
.75
.88
1.00
1.13
1.25
1.38
1.50
1.75
2.10
2.63
E
.97
1.15
1.42
1.63
1.81
2.32
2.75
3.20
3.69
4.07
4.53
5.01
5.38
6.38
7.25
9.38
F
.62
.75
.92
1.06
1.18
1.50
1.81
2.10
2.38
2.68
3.00
3.31
3.62
4.19
5.00
5.68
Tolerance
+/G
.97
1.07
1.28
1.48
1.66
2.04
2.40
2.86
3.24
3.61
3.97
4.43
4.84
5.78
6.77
8.07
K
1.59
1.91
2.31
2.67
3.03
3.76
4.53
5.33
5.94
6.78
7.50
8.28
9.05
10.97
12.74
14.85
L
.19
.22
.25
.31
.38
.44
.50
.50
.56
.63
.69
.75
.81
1.00
1.13
1.38
M
1.43
1.71
2.02
2.37
2.69
3.34
3.97
4.50
5.13
5.71
6.25
6.83
7.33
9.06
10.35
13.00
G
.06
.06
.13
.13
.13
.13
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
A
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.13
.13
.13
.13
.13
.25
KCI Crane Service
Lifting
Products
Hardware
Slings
Dimensions
(in.)
Wire
Rope
Weight
Each
Cordage
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/2
Crosby 2t through 25t G209 anchor shackles are type approved to DNV Certification Notes 2.7-1 - Offshore Containers. These Crosby shackles are statistical proof and impact tested. The tests are conducted by Crosby and 3.1 test certification is available upon request.
Crosby quality.
Load
Securement
in.
Working
Stock
Load
No.
Limit
t*
G-210 S-210
■
■
Contractors
Supply
Nominal
Size
Services
Working Load Limit and grade “6”
permanently shown on every shackle.
Fatigue rated.
or other certification. Charges for proof testing
and certification available when requested at the
time of order.
Approved for use at -40°C (-40°F) to 204°C (400°F).
2t through 25t bow and screw pin are Certified to
meet charpy impact testing of 42 joules (31 ft.-Ibs.) min. ave. at -20°C (-4°F).
All shackles are Quenched and Tempered and can
meet DNV impact requirements of 42 joules (31 ft.-Ibs.) at -20°C (-4°F).
Type Approval and certification in accordance with
ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
Fall
Protection
■
■
■
■
■
■
■
■
■
■
■
■
Hoists
G-210 Screw pin chain shackles meet the performance
requirements of Federal Specification RR-C-271F, Type IVB,
the contractor.
359
7/3/13 9:40 AM
G-213 / S-213 Round Pin
Anchor Shackles
G-213 Round pin anchor shackles meet the performance
the contractor.
■
■
■
■
■
■
■
■
■
Capacities 1/2 through 35 metric tons.
Working Load Limit permanently shown on
every shackle.
Fatigue rated.
or other certification. Charges for proof testing and
certification available when requested at the time
of order.
Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules (31 ft.-Ibs.) at
-20°C (-4°F).
Crosby quality.
Nominal
Size
Working
Load
Limit
in.
t*
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/2
3/4
1
1-1/2
2
3-1/4
4-3/4
6-1/2
8-1/2
9-1/2
12
13-1/2
17
25
35
Stock
No.
Weight
Each
G-213 S-213
lbs.
A
B
C
D
E
F
G
H
N
P
C
A
1018017
1018035
1018053
1018071
1018099
1018115
1018133
1018151
1018179
1018197
1018213
1018231
1018259
1018277
1018295
.13
.18
.29
.38
.71
1.50
2.32
3.49
5.00
6.97
9.75
13.25
17.25
29.46
45.75
.47
.53
.66
.75
.81
1.06
1.25
1.44
1.69
1.81
2.03
2.25
2.38
2.88
3.25
.31
.38
.44
.50
.63
.75
.88
1.00
1.13
1.25
1.38
1.50
1.63
2.00
2.25
1.13
1.22
1.44
1.69
1.88
2.38
2.81
3.31
3.75
4.25
4.69
5.25
5.75
7.00
7.75
.25
.31
.38
.44
.50
.63
.75
.88
1.00
1.13
1.29
1.42
1.54
1.64
2.08
.78
.84
1.03
1.16
1.31
1.69
2.00
2.28
2.69
2.91
3.25
3.63
3.88
5.00
5.75
.61
.75
.91
1.06
1.19
1.50
1.81
2.09
2.38
2.69
3.00
3.31
3.63
4.19
4.81
1.28
1.47
1.78
2.03
2.31
2.94
3.50
4.03
4.69
5.16
5.75
6.38
6.88
8.86
9.97
1.84
2.09
2.49
2.91
3.28
4.19
4.97
5.83
6.56
7.47
8.25
9.16
10.00
12.34
13.68
1.34
1.59
1.86
2.13
2.38
2.91
3.44
3.81
4.53
5.13
5.50
6.13
6.50
7.75
8.75
.25
.31
.38
.44
.50
.69
.81
.97
1.06
1.25
1.38
1.50
1.62
2.25
2.40
.06
.06
.13
.13
.13
.13
.25
.25
.25
.25
.25
.25
.25
.25
.25
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.13
.13
.13
.13
1018026
1018044
1018062
101050
1018106
1018142
1018160
1018166
1018188
1018204
1018222
1018240
1018268
1018286
1018302
Dimensions
(in.)
Tolerance
+/-
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
360
7/3/13 9:40 AM
Overhead
Cranes / Jibs
G-215 / S-215 Round Pin
Chain Shackles
t*
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/2
3/4
1
1-1/2
2
3-1/4
4-3/4
6-1/2
8-1/2
9-1/2
12
13-1/2
17
25
35
Engineered
Products
Slings
G-215 S-215
lbs.
A
B
C
D
E
F
G
K
N
C
A
1018810
1018838
1018856
1018874
1018892
1018918
1018936
1018954
1018972
1018990
1019016
1019034
1019052
1019070
1019098
.10
.18
.25
.40
.50
1.21
2.00
3.28
4.75
6.30
9.00
12.00
16.15
29.96
43.25
.47
.53
.66
.75
.81
1.06
1.25
1.44
1.69
1.81
2.03
2.25
2.38
2.88
3.25
.31
.38
.44
.50
.63
.75
.88
1.00
1.13
1.25
1.38
1.50
1.63
2.00
2.25
.25
.31
.38
.44
.50
.63
.81
.97
1.00
1.25
1.38
1.50
1.62
2.12
2.36
.25
.31
.38
.44
.50
.63
.75
.88
1.00
1.13
1.25
1.38
1.50
1.75
2.10
.97
1.15
1.42
1.63
1.81
2.32
2.75
3.20
3.69
4.07
4.53
5.01
5.38
6.38
7.25
.62
.75
.92
1.06
1.18
1.50
1.81
2.10
2.38
2.68
3.00
3.31
3.62
4.19
5.00
.91
1.07
1.28
1.48
1.66
2.04
2.40
2.86
3.24
3.61
3.97
4.43
4.87
5.82
6.82
1.59
1.91
2.31
2.67
3.03
3.76
4.53
5.33
5.94
6.78
7.50
8.28
9.05
10.97
12.74
1.34
1.63
1.86
2.13
2.38
2.91
3.44
3.81
4.53
5.13
5.50
6.13
6.50
7.75
8.75
.06
.06
.13
.13
.13
.13
.25
.25
.25
.25
.25
.25
.25
.25
.25
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.13
.13
.13
.13
.13
1018829
1018847
1018865
1018883
1018909
1018927
1018945
1018963
1018981
1019007
1019025
1019043
1019061
1019089
1019105
Dimensions
(in.)
Tolerance
+/-
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
Hardware
Weight
Each
Lifting
Products
in.
Stock
No.
Wire
Rope
Working
Load
Limit
Cordage
Nominal
Size
Services
Capacities 1/2 through 35 metric tons.
every shackle.
Fatigue rated.
or other certification. Charges for proof testing and
certification available when requested at the time
of order.
Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules (31 ft-Ibs.) at
-20°C (-4°F).
Crosby quality.
Load
Securement
■
■
■
■
■
■
■
■
■
Hoists
G-215 Round pin chain shackles meet the performance
requirements of Federal Specification RR-C-271F Type IVB,
the contractor.
361
7/3/13 9:40 AM
G-209A Alloy Screw Pin
Shackles
G-209A Screw pin anchor shackles meet the performance
Grade B, Class 2, except for those provisions required of
the contractor.
■
■
■
■
■
■
■
Capacities 2 thru 21 metric tons. Meets performance requirements of Grade 8 shackles.
Forged Alloy Steel – Quenched and Tempered,
with alloy pins.
every shackle.
Hot Dip Galvanized.
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification. Charges for proof testing and certification available when requested at the time
of order.
Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor,
proof load and temperature requirements. Importantly, these shackles meet other critical performance
requirements including fatigue life, impact properties and material traceability, not addressed by
ASME B30.26.
Nominal
Size
Working
Load
Limit
in.
t*
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
2
2-2/3
3-1/2
5
7
9-1/2
12-1/2
15
18
21
G-209A
Stock
No.
Weight
Each
Dimensions
(in.)
Tolerance
+/-
lbs.
A
B
C
D
E
F
G
H
L
M
P
C
A
1017450
1017472
1017494
1017516
1017538
1017560
1017582
1017604
1017626
1017648
.31
.38
.63
1.38
2.25
3.61
5.32
7.25
9.88
13.25
.66
.75
.81
1.06
1.25
1.44
1.69
1.81
2.03
2.25
.44
.50
.63
.75
.88
1.00
1.13
1.25
1.38
1.50
1.44
1.69
1.88
2.38
2.81
3.31
3.75
4.25
4.69
5.25
.38
.44
.50
.63
.75
.88
1.00
1.16
1.29
1.42
1.03
1.16
1.31
1.69
2.00
2.28
2.69
2.91
3.25
3.63
.91
1.06
1.19
1.50
1.81
2.09
2.38
2.69
3.00
3.31
1.78
2.03
2.31
2.94
3.50
4.03
4.69
5.16
5.75
6.38
2.49
2.91
3.28
4.19
4.97
5.83
6.56
7.47
8.25
9.16
.25
.31
.38
.44
.50
.50
.56
.63
.69
.75
2.03
2.38
2.69
3.34
3.97
4.50
5.07
5.59
6.16
6.84
.38
.44
.50
.69
.81
.97
1.06
1.25
1.38
1.50
.13
.13
.13
.13
.25
.25
.25
.25
.25
.25
.06
.06
.06
.06
.06
.06
.06
.06
.06
.13
*Note: Maximum Proof Load is 2 times the Working Load Limit (metric tons) and 2.2 times the Working Load Limit (short tons).
Minimum Ultimate Strength is 4.5 times the Working Load Limit for metric tons, and 5 times the Working Load Limit for short tons.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
362
7/3/13 9:40 AM
G-2169
S-2169
Engineered
Products
Services
Hoists
Capacities of 7, 12.5 and 18 metric tons.
Quenched and Tempered for maximum strength.
Forged Alloy Steel.
Available in galvanized and self colored finished.
Individually proof tested and magnetic particle
inspected. Crosby certification available at time
of order.
Meets or exceeds all requirements of ASME B30.26
including identification, ductility, design factor,
proof load and temperature requirements. Importantly, these shackles meet other critical performance
requirements, including fatigue life, impact properties and material traceability, not addressed by
ASME B30.26.
Crosby quality.
Lifting
Products
Hardware
Slings
■
■
■
■
■
■
■
Overhead
Cranes / Jibs
Wide Body Shackles
Weight
Each
t*
G-2169 S-2169
lbs.
7
12.5
18
1021665
1021673
1021691
1021664
1021682
1021669
3.5
8.8
13
Dimensions
(in.)
B
+/.25
1.25
1.69
2.03
C
.69
.92
1.16
D
+/.02
.88
1.13
1.38
Wire
Rope
Stock
No.
E
G
H
J
K
L
M
P
1.82
2.38
2.69
1.25
1.37
1.50
3.56
4.63
5.81
1.60
2.13
2.50
1.25
1.63
2.00
.50
.56
.69
3.97
5.13
6.25
4.10
5.51
6.76
R
5.87
7.63
9.38
Cordage
Working
Load
Limit
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
Load
Securement
*Note: Ultimate Load is 5 times the Working Load Limit. Forged Alloy Steel. Proof Load is 2 times the Working Load Limit.
363
7/3/13 9:40 AM
G-2130 / S-2130 Bolt Type
Anchor Shackles
G-2130 Bolt type anchor shackles with thin head bolt - nut with
cotter pin. Meets the performance requirements of Federal Specification
RR-C-271F Type IVA, Grade A, Class 3, except for those provisions
required of the contractor.
■
■
■
■
■
■
■
■
■
■
■
■
■
Working Load Limit and grade “6” permanently shown on
every shackle.
Forged – Quenched and Tempered, with alloy pins.
Hot Dip galvanized or Self Colored. (85, 120, and 150 metric
ton shackles are all hot dip galvanized bows and the bolts
are Dimetcoted® and painted red)
Fatigue rated (1/3t - 55t).
Shackles 85 metric tons and larger are individually
proof tested to 2.0 times the working load limit.
Shackles 120 metric tons and larger are proof tested, Magnetic Particle Inspected and provided with Serialized Pin and Bow.
Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
3.1 Certification as standard available for charpy and statistical proof test only up to 25 tons to DNV2.7-1 and EN13889.
Crosby 2t through 25t G2130 anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested to 42 joules
Nominal
Size
in.
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
Working
Stock
Load
No.
Limit
t*
G-2130 S-2130
1/3 ‡
1/2
3/4
1
1-1/2
2
3-1/4
4-3/4
6-1/2
8-1/2
9-1/2
12
13-1/2
17
25
35
55
† 85
† 120 ‡
† 150 ‡
1019464
1019466
1019468
1019470
1019471
1019472
1019490
1019515
1019533
1019551
1019579
1019597
1019613
1019631
1019659
1019677
1019695
1019711
1019739
1019757
–
–
–
–
–
1019481
1019506
1019524
1019542
1019560
1019588
1019604
1019622
1019640
1019668
1019686
1019702
–
–
–
■
■
(31 ft.-lbs.) min. ave. at -20°C (-4°F). The tests are conducted by Crosby and 3.1 test certification is available upon request.
All other 2130 and all 2150 shackles can meet charpy requirements of 42 joules (31 ft.-lbs) avg. at -20°C (-4°F) upon special request.
Look for the Red Pin®…the mark of genuine Crosby quality.
Weight
Each
lbs.
.06
.11
.22
.33
.49
.79
1.68
2.72
3.95
5.66
8.27
11.71
15.83
19
33.91
52.25
98.25
154
265
338
Dimensions
(in.)
A
.38
.47
.53
.66
.75
.81
1.06
1.25
1.44
1.69
1.81
2.03
2.25
2.38
2.88
3.25
4.13
5.00
5.25
5.50
B
.25
.31
.38
.44
.50
.64
.77
.89
1.02
1.15
1.25
1.40
1.53
1.66
2.04
2.30
2.80
3.30
3.75
4.26
C
.88
1.13
1.22
1.44
1.69
1.88
2.38
2.81
3.31
3.75
4.25
4.69
5.25
5.75
7.00
7.75
10.50
13.00
14.63
14.50
D
.19
.25
.31
.38
.44
.50
.63
.75
.88
1.00
1.33
1.29
1.42
1.53
1.84
2.08
2.71
3.12
3.62
4.00
E
.60
.78
.84
1.03
1.16
1.31
1.69
2.00
2.28
2.69
2.91
3.25
3.63
3.88
5.00
5.75
7.25
7.88
9.00
10.00
F
.56
.61
.75
.91
1.06
1.19
1.50
1.81
2.09
2.38
2.69
3.00
3.31
3.63
4.19
4.81
5.69
6.50
8.00
9.00
Tolerance
+/H
1.47
1.84
2.09
2.49
2.91
3.28
4.19
4.97
5.83
6.56
7.47
8.25
9.16
10.00
12.34
13.68
17.90
21.50
24.88
25.68
L
.98
1.28
1.47
1.78
2.03
2.31
2.94
3.50
4.03
4.69
5.16
5.75
6.38
6.88
8.80
10.15
12.75
14.62
17.02
18.00
N
.19
.25
.31
.38
.44
.50
.69
.81
.97
1.06
1.25
1.38
1.50
1.62
2.25
2.40
3.13
3.62
4.38
4.56
C
.06
.06
.06
.13
.13
.13
.13
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
A
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.13
.13
.13
.13
.25
.25
.25
.25
*Note: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. †
Individually Proof Tested with certification.
‡
Furnished in Anchor style only and furnished with Round Head Bolts with welded handles.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
364
7/3/13 9:40 AM
Overhead
Cranes / Jibs
G-2150 / S-2150 Bolt Type
Chain Shackles
*
†
‡
1019768
1019770
1019772
1019774
1019775
1019793
1019819
1019837
1019855
1019873
1019891
1019917
1019935
1019953
1019971
1019999
1020013
1019711
–
–
–
–
1019784
1019800
1019828
1019846
1019864
1019882
1019908
1019926
1019944
1019962
1019980
1020004
–
–
.13
.23
.33
.49
.75
1.47
2.52
3.85
5.55
7.60
10.81
13.75
18.50
31.40
46.75
85.00
124.25
154
A
.47
.53
.66
.75
.81
1.06
1.25
1.44
1.69
1.81
2.03
2.25
2.38
2.88
3.25
4.13
5.00
5.00
D
.25
.31
.38
.44
.50
.63
.75
.88
1.00
1.13
1.25
1.38
1.50
1.75
2.10
2.63
3.00
13.00
F
.62
.75
.92
1.06
1.18
1.50
1.81
2.10
2.38
2.68
3.00
3.31
3.62
4.19
5.00
5.68
6.50
3.12
G
.91
1.07
1.28
1.48
1.66
2.04
2.40
2.86
3.24
3.61
3.97
4.43
4.87
5.82
6.82
8.07
8.56
7.88
K
1.59
1.91
2.31
2.67
3.03
3.76
4.53
5.33
5.94
6.78
7.50
8.28
9.05
10.97
12.74
14.85
16.87
6.50
M
.97
1.15
1.42
1.63
1.81
2.32
2.75
3.20
3.69
4.07
4.53
5.01
5.38
6.38
7.25
9.38
11.00
21.50
P
1.56
1.82
2.17
2.51
2.80
3.56
4.15
4.8
5.39
5.90
6.69
7.21
7.73
9.33
10.41
13.58
15.13
14.62
R
.25
.31
.38
.44
.50
.63
.81
.97
1.00
1.25
1.38
1.50
1.62
2.12
2.36
2.63
3.50
3.62
G
.06
.06
.13
.13
.13
.13
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
A
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.13
.13
.13
.13
.25
.25
.25
Note: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. Individually Proof Tested with certification.
Furnished in Anchor style only and furnished with Round Head Bolts with welded handles.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Hardware
Slings
Engineered
Products
B
.31
.38
.44
.50
.64
.77
.89
1.02
1.15
1.25
1.40
1.53
1.66
2.04
2.30
2.80
3.25
3.30
Tolerance
+/-
Lifting
Products
lbs.
Dimensions
(in.)
Wire
Rope
1/2
3/4
1
1-1/2
2
3-1/4
4-3/4
6-1/2
8-1/2
9-1/2
12
13-1/2
17
25
35
55
† 85
† 85
Weight
Each
Cordage
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/2
3
3
(31 ft.-lbs.) min. ave. at -20°C (-4°F). The tests are conducted by Crosby and 3.1 test certification is available upon request.
All other 2130 and all 2150 shackles can meet charpy requirements of 42 joules (31 ft.-lbs) avg. at -20°C (-4°F) upon special request.
Load
Securement
in.
Working
Stock
Load
No.
Limit
t*
G-2150 S-2150
■
■
Contractors
Supply
Nominal
Size
Services
Working Load Limit and grade “6” permanently shown on
every shackle.
Forged – Quenched and Tempered, with alloy pins.
Hot Dip galvanized or Self Colored. (85, 120 and 150 metric
ton shackles are all hot dip galvanized bows and the bolts
are Dimetcoted® and painted red)
Fatigue rated (1/3t - 55t).
Shackles 85 metric tons and larger are individually
proof tested to 2.0 times the working load limit.
Shackles 120 metric tons and larger are proof tested, Magnetic Particle Inspected and provided with Serialized Pin and Bow.
Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
3.1 Certification as standard available for charpy and statistical proof test only up to 25 tons to DNV2.7-1 and EN13889.
Crosby 2t through 25t G2130 anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested to 42 joules
Fall
Protection
■
■
■
■
■
■
■
■
■
■
■
■
■
Hoists
G-2130 Bolt type anchor shackles with thin head bolt - nut with
cotter pin. Meets the performance requirements of Federal Specification
RR-C-271F Type IVA, Grade A, Class 3, except for those provisions
365
7/3/13 9:40 AM
G-2140 Alloy Bolt Type
Shackles
G-2140 meets the performance requirements of Federal Specification
RR-C-271F, Type IVA, Grade B, Class 3, except for those provisions
■
Quenched and Tempered.
■
Alloy bows, Alloy bolts.
■
Forged Alloy Steel 30 thru 175 metric tons and Cast Alloy
Steel 200 thru 400 metric tons. Meets performance requirements
of Grade 8 shackles.
■
Working Load Limit is permanently shown on every shackle.
■
30, 40, 55 and 85 metric ton shackle bows are available
galvanized or self colored with pins that are galvanized and
painted red. 120, 150, 175 metric ton shackle bows are hot-dip galvanized; pins are Dimetcoted® and painted red.
200, 250, 300 and 400 metric ton shackle bows are
Dimetcoted®; pins are Dimetcoted® and painted red.
■
All sizes are RFID EQUIPPED.
■
■
Shackles are Quenched and Tempered and can meet DNV impact
requirements of 42 joules (31 ft.-lbs.) at -20°C (-4°F).
■
All sizes are individually proof tested to 2.0 times the
Working Load Limit.
■
Shackles 200 metric tons and larger are provided as follows.
■
Serialized Pin and Bow
■
Material Certification (Chemical)
■
Magnetic Particle Inspected.
■
Certification must be requested at time of order.
Nominal
Size
in.
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
4-3/4 **
5 **
6
7 **
Working
Stock
Load
No.
Limit
t*
G-2140 S-2140
30
40
55
85
120
† 150
† 175
† 200
† 250
† 300
† 400
1021110
1021138
1021156
1021174
1021192
1021218
1021236
1021414
1021432
1021450
1021478
1021129
1021147
1021165
1021183
–
–
–
–
–
–
–
■
■
■
Meets or exceeds all requirements of ASME B30.26 including
identification, ductility, design factor, proof load and temperature
requirements. Importantly, these shackles meet other critical
performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Type Approval and certification in accordance with ABS 2006 Steel
Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
Weight
Each
lbs.
18.8
33.8
49.9
103
162
268
332
455
650
780
1200
Dimensions
(in.)
A
2.38
2.88
3.25
4.12
5.00
5.25
5.50
7.25
8.50
8.38
8.25
B
3.62
4.19
4.81
5.81
6.50
8.00
9.00
10.50
12.00
12.00
14.00
C
1.62
2.25
2.40
3.12
3.63
4.38
4.56
6.00
6.50
6.75
7.25
D
1.63
2.00
2.25
2.75
3.25
3.75
4.25
4.75
5.00
6.00
7.00
E
5.75
7.00
7.75
10.50
13.00
14.63
14.50
15.63
20.00
19.50
22.50
F
1.39
1.75
2.00
2.62
3.00
3.75
4.00
3.75
3.88
4.75
6.50
G
6.88
8.81
10.16
12.75
14.62
17.02
18.00
21.00
24.50
25.00
26.00
H
7.73
9.33
10.41
13.58
15.13
17.62
20.37
21.21
22.68
25.06
28.68
J
10.00
12.34
13.68
17.90
21.50
24.88
25.68
29.25
35.00
35.25
40.25
K
3.88
5.00
5.75
7.25
7.88
9.00
10.00
11.00
13.00
13.00
13.00
L
1.53
1.84
2.08
2.71
3.12
3.62
4.00
4.50
4.50
5.00
6.00
Tolerance
+/A
E
.13
.13
.13
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
* Note: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Load is 4 times the Working Load Limit on
200 thru 400 metric tons. For sizes 30 thru 175 metric tons, Minimum Ultimate Load is 5.4 times the Working Load Limit.
** Cast Alloy Steel.
† Furnished with Round Head Bolts with an eyebolt for handling
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
366
7/3/13 9:40 AM
*
†
t*
G-2160
S-2160
lbs.
A
7
12.5
18
30
40
55
† 75
† 125
† 200
† 300
400
500
600
700
800
900
1,000
1,250
1,550
1021256
1021265
1021274
1021283
1021285
1021287
1021290
1021307
1021316
1021325
1021334
1021343
1021352
1021361
1021254
1021389
1021370
1021272
1021281
1021548
1021557
1021566
1021575
1021584
1021593
–
–
–
–
–
–
–
–
–
–
–
–
–
4.0
8.8
14.9
26.5
–
68
99
–
370
847
1,130
1,440
1,995
2,415
2,880
3,628
4,155
5,320
8,302
4.14
5.38
6.69
7.69
9.28
10.36
14.37
16.51
20.67
24.20
30.27
33.35
36.02
38.91
41.66
43.73
45.98
49.86
54.89
B +/.25
1.25
1.69
2.03
2.37
2.88
3.25
4.13
5.12
5.91
7.38
8.66
9.84
10.83
11.81
12.80
13.78
14.96
16.93
18.31
C
.69
.92
1.16
1.38
1.69
2.00
2.12
2.56
3.35
4.00
5.16
5.73
6.25
6.59
7.30
7.78
8.33
9.15
10.58
.88
1.13
1.38
1.63
2.00
2.25
2.75
3.15
4.12
5.25
6.30
7.09
7.87
8.46
9.06
9.84
10.63
11.81
12.60
Services
E
G
H
J
K
P
R
1.82
2.38
2.69
3.50
4.00
4.63
5.00
5.71
7.28
9.25
11.81
13.39
15.50
14.80
16.54
16.63
17.72
21.00
23.82
1.25
1.37
1.50
1.75
2.31
2.63
2.50
3.15
4.33
5.38
6.30
6.69
7.28
7.87
8.27
8.66
9.06
10.43
15.92
3.56
4.63
5.81
6.94
8.06
9.36
11.53
14.36
18.90
23.63
22.64
24.81
27.56
28.94
29.53
29.82
29.92
36.61
42.32
1.60
2.13
2.50
3.13
3.75
5.00
4.75
5.91
8.63
10.38
12.60
13.39
14.57
15.75
16.54
17.32
18.11
20.87
22.82
1.25
1.63
2.00
2.50
3.00
3.50
3.64
4.33
5.41
6.31
7.28
8.86
9.74
10.63
10.92
11.52
12.11
12.70
13.29
4.10
5.51
6.76
8.50
10.62
12.26
12.28
14.96
19.49
23.38
27.17
31.10
34.06
37.01
38.39
40.35
42.32
46.26
49.41
5.87
7.63
9.38
11.38
13.62
15.63
18.41
22.65
29.82
37.26
38.76
42.72
47.24
50.18
52.09
54.04
55.31
65.35
73.43
2.1
2.4
2.8
4.1
3.6
4.3
5.9
6.8
8.9
11.8
14.3
14.8
20.3
16.6
18.0
22.4
19.3
24.4
27.3
7t-300t Proof Load is 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
400t-1550t Proof Load is 1.33 times the Working Load Limit. Ultimate Load is 4.5 times the Working Load Limit.
Available in Forged and Cast Alloy Steel.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Hardware
Slings
Engineered
Products
D +/.02
Effective
Body
Diameter
Lifting
Products
Dimensions
(in.)
Wire
Rope
Weight
Each
Shackles 18t and larger have DNV Type Approval to Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements. Databook is provided that includes required documents.
Serialization / Identification
Material Testing (Physical / Chemical / Charpy)
Proof Testing
Cordage
■
■
■
■
■
Load
Securement
Stock
No.
Patented
Contractors
Supply
Working
Load
Limit
Hoists
All sizes Quenched and Tempered for maximum strength.
Forged alloy steel from 7 through 300 metric tons.
Cast alloy steel from 400 through 1550 metric tons.
Sizes 300 metric tons and smaller are proof tested to 2 times
the Working Load Limit.
Sizes 400 metric tons and larger are tested to 1.33 times
Working Load Limit.
All ratings are in metric tons, embossed on side of bow.
G-2160, (7-55t), are Hot Dip Galvanized and pins are painted red.
G-2160, (75t and larger), bows are furnished Dimetcoted,
and pins are Dimetcoted, then painted red.
S-2160 bows and pins are painted red.
Shackles, 30t and larger, are RFID EQUIPPED.
Can be used to connect HIGH STRENGTH Synthetic Web Slings, HIGH STRENGTH Synthetic Round Slings or Wire Rope Slings.
Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble.
Increases usable sling strength minimum of 15% and greatly
improves life of wire rope slings.
Pin is non-rotating, with weld-on handles for easier use
(75t and larger).
Bow and bolt are Certified to meet charpy impact testing of
42 joules (31 ft.-Ibs.) min. ave. at -20°C (-4°F).
All 2160 shackles are individually proof tested and magnetic
particle inspected. Crosby certification available at time of order.
Shackles requiring ABS, Lloyds and other certifications are
available upon special request and must be specified at
time of order.
Fall
Protection
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Overhead
Cranes / Jibs
G-2160 / S-2160
Wide Body Shackles
367
7/3/13 9:40 AM
S-209T
Theatrical Shackles
■
■
■
■
■
■
■
■
■
■
Sizes: 3/8" through 3/4"
Capacities 1 through 4-3/4 metric tons.
Working Load Limit permanently shown on every shackle.
Flat black baked on power coat finish.
Fatigue Rated.
Industry leading 6 to 1 design factor.
Screw pin anchor shackles meet the performance requirement
of Federal Specification RR-C-271F Type A, Grade A, Class 2, except for those provisions required of the contractor.
Meets the performance requirements of EN 13889:2003.
Meets or exceeds all requirements of ASME B30.26, including
identification, ductility, design factor, proof load and
temperature requirements. Importantly, these shackles
meet other critical performance requirements,
including fatigue life, impact properties and material
traceability, not addressed by ASME B30.26.
Nominal
Size
Working
Load
Limit
Stock
No.
Weight
Each
in.
t
lbs.
A
B
C
D
E
F
G
H
L
M
P
C
A
3/8
7/16
1/2
5/8
1
1-1/2
2
3-1/4
Stock
No.
.31
.38
.72
1.37
.66
.75
.81
1.06
.44
.50
.63
.75
1.44
1.69
1.88
2.38
.38
.4
.50
.63
1.03
1.16
1.31
1.69
.91
1.06
1.19
1.50
1.78
2.03
2.31
2.94
2.49
2.91
3.28
4.19
.25
.31
.38
.44
2.02
2.37
2.69
3.34
.38
.44
.50
.69
.13
.13
.13
.13
.06
.06
.06
.06
1018706
1018724
1018742
1018760
Dimensions
(in.)
Tolerance
+/-
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
368
7/3/13 9:40 AM
SEE WARNING INFORMATION
ON PAGES 454 - 461.
Hoists
■ All shackles meet or exceed Federal Specification
RRC-271D
■ Working Load Limit and traceability codes shown
as permanent marking on body and pin
■ Available in painted, galvanized and self-colored
finishes (Dacromate coating upon special request only)
■ All shackles have alloy quenched and tempered pins
■ Shackles exhibit extreme deformation before failure *
■ Special testing and certification including magnetic
particle, proof load and fatigue test available
upon request at time of order
■ Special products engineering available to fit your
special lifting, tie down and pulling needs
■ Design factor 5:1
Overhead
Cranes / Jibs
WARNING
Midland
Anchor Shackles
Engineered
Products
Services
Screw Pin
Round Pin
Bolt &
Nut
P
E
W
R
L
B min
Weight
(lbs.)
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-1/2
1-5/8
1-5/8
1-3/4
1-3/4
2
2
2-1/2
3
2
2.6
3.3
5
7
9.5
12.5
15
18
21
25
30
29
35
34
40
43
50
85
120
M648A
M649A
M650A
M651A
M652A
M653A
M654A
M655A
M656A
M666A
M657A
–
M685A
–
M677A
–
M658A
–
–
–
–
M349A
M350A
M351A
M352A
M353A
M354A
M355A
M356A
M366A
M357A
–
M385A
–
M377A
–
M358A
–
–
–
M848A
M849A
M850A
M851A
M852A
M853A
M854A
M855A
M856A
M866A
–
M857A
–
M885A
v
M877A
–
M858A
MC860AG
MC862AG
0.438
0.500
0.625
0.750
0.875
1.000
1.125
1.250
1.375
1.500
1.625
1.625
1.750
1.750
2.000
2.000
2.250
2.250
2.750
3.250
0.531
0.593
0.718
0.843
0.968
1.109
1.234
1.375
1.531
1.656
1.781
1.781
1.906
1.906
2.156
2.156
2.406
2.406
2.906
3.406
0.656
0.750
0.813
1.063
1.250
1.438
1.688
1.812
2.031
2.250
2.375
2.375
2.625
2.625
2.875
2.875
3.250
3.250
4.125
5.000
1.125
1.250
1.375
1.875
2.125
2.375
2.625
2.875
3.250
3.500
3.750
3.750
4.125
4.125
4.500
4.500
5.250
5.250
6.250
6.750
1.437
1.689
1.875
2.375
2.813
3.312
3.750
4.250
4.688
5.250
5.750
5.750
6.250
6.250
7.000
7.000
7.750
7.750
10.500
13.000
0.937
1.062
1.187
1.500
1.750
2.000
2.312
2.625
2.875
3.250
3.375
3.375
4.000
4.000
4.500
4.500
5.250
5.250
6.750
7.375
0.30
0.50
0.75
1.30
2.30
3.50
5.00
7.00
9.50
12.50
17.20
17.20
23.50
23.50
27.70
27.70
39.00
39.00
90.50
137.00
*WARNING: Working load limit is not to be exceeded.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Wire
Rope
Round
Pin
Cordage
Screw
Pin
Load
Securement
Dimensions (in.)
Working
Load Limit
(ton) *
Contractors
Supply
Product Code
Size
(in.)
Fall
Protection
Bolt & Nut
Lifting
Products
Hardware
Slings
369
7/3/13 9:40 AM
WARNING
Midland
Chain Shackles
ON PAGES 454 - 461.
■ All shackles meet or exceed Federal Specification
RRC-271D
■ Working Load Limit and traceability codes shown
as permanent marking on body and pin
■ Available in painted, galvanized and self-colored
finishes (Dacromate coating upon special request only)
■ All shackles have alloy quenched and tempered pins
■ Shackles exhibit extreme deformation before failure *
■ Special testing and certification including magnetic
particle, proof load and fatigue test available
upon request at time of order
■ Special products engineering available to fit your
special lifting, tie down and pulling needs
■ Design factor 5:1
Screw Pin
Round Pin
Bolt & Nut
Product Code
Dimensions (in.)
Size
(in.)
Working
Load Limit
(ton) *
Screw
Pin
Round
Pin
Bolt &
Nut
P
E
W
R
L
Weight
(lbs.)
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
2
2.6
3.3
5
7
9.5
12.5
15
18
21
30
35
40
50
M748A
M749A
M750A
M751A
M752A
M753A
M754A
M755A
M756A
M766A
M757A
M785A
M777A
M758A
–
–
M550A
M551A
M552A
M553A
M554A
M555A
M556A
M566A
M557A
M585A
M577A
M558A
M948A
M949A
M950A
M951A
M952A
M953A
M954A
M955A
M956A
M966A
M957A
M985A
M977A
M958A
.438
.5
.625
.75
.875
1
1.125
1.25
1.375
1.5
1.625
1.75
2
2.25
.531
.593
.718
.843
.968
1.109
1.234
1.375
1.531
1.656
1.781
1.906
2.156
2.406
.656
.75
.813
1.063
1.25
1.438
1.688
1.812
2.031
2.25
2.375
2.625
2.875
3.25
1.125
1.25
1.375
1.875
2.125
2.375
2.625
2.875
3.25
3.5
3.75
4.125
4.5
5.25
1.437
1.689
1.875
2.375
2.813
3.312
3.75
4.25
4.688
5.25
5.75
6.25
7
7.75
.25
.40
.75
1.3
2.3
3.5
5
7
9.5
12.5
17.2
23.5
27.7
39
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
370
7/3/13 9:40 AM
ON PAGES 454 - 461.
Size
1
1-1/8
1-1/4
1-1/2
1-3/4
2
Opening
2
1.75
1.87
2.00
2.12
2.50
3.00
Services
A
B
C
D
E
F
G
H
Weight
WLL
(tons)
4.25
4.50
5.25
6.25
7.00
8.00
2.25
2.50
2.75
3.00
3.50
4.00
1.00
1.00
1.25
1.50
1.75
2.00
1.12
1.25
1.37
1.62
2.00
2.25
7 ± .25
8 ± .50
9 ± .50
10 ± .50
11 ± .50
12 ± .75
0.62
0.75
0.87
1.12
1.25
1.37
2.37
3.00
3.00
3.50
4.00
4.50
5.00
5.00
5.00
6.00
7.00
8.00
10
13
18
29
45
63
8
10
12
17
24
30
All dimensions in inches.
■
■
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
Load
Securement
Wire
Rope
12 ton working load limit at 4:1 design factor.
Skookum Part Number 615912
Equipped with Skookum 1" #320 bolt type
anchor shackle
Built with high strength steel.
12" lg. stainless steel release cable with thimble.
(supplied but not shown)
Cordage
■
■
■
Lifting
Products
No. 159A Sheet Pile
Shackle Ground Release
Engineered
Products
■
Slings
No tools are required.
Max opening with pin in open (unlocked) position.
Design factor is 5 to1.
Replacement pins must be replaced or repaired by
Skookum in Hubbard, OR.
Made in the U.S.A.
Hardware
■
■
■
■
Hoists
The No. 59A shackles were specifically designed
for pulling sheet piling. They are equipped with an easy
opening pin which will not detach and become lost.
Overhead
Cranes / Jibs
WARNING
Alloy No. 59A
Sheet Pile Shackles
371
7/3/13 9:40 AM
WARNING
Alloy Towing
Shackles
■
■
■
ON PAGES 454 - 461.
Hot galvanized, forged, heat-treated, all alloy steel
Extra wide opening for hawser thimbles
Permanently marked with size and Working Load Limit.
Replacement Bolts
■
■
Intended for use with KULKONI Towing Shackles only.
Complete with bolt, nut and cotter pin. Alloy steel,
hot galvanized.
Replacement Bolts
Alloy Towing Shackles
*
**
Size
A
(in.)
Working
Load
Limit
(tons)
Bolt
Dia.
B
(in.)
Mouth
Opening
D
(in.)
Approx.
Weight
Each
(lbs.)
C
E
F
1-1/2
1-3/4
2
2-1/2
3
22
30
40
55
80
1-7/8
2
2-1/4
2-3/4
3-1/4
4.19
5.00
5.75
6.50
7.25
27.5
40
56
106
157
8.50
9.75
10.75
12.38
13.00
3.75
4.38
5.00
6.00
6.75
6.25
6.88
8.13
8.38
10.00
Dimension (in.)
Diameter
(in.)
Fits
Shackle
Size
(in.)
Approx.
Weight
Each
(lbs.)
1-7/8
2
2-1/4
2-3/4
3-1/4
1-1/2
1-3/4
2
2-1/2
3
10.7
13.6
20.0
34.7
52.6
The YELLOW shackle bolt is the Federally Registered Trademark of Kulkoni, Inc.
Some sizes may have single nut, double cotter pin.
Galvanized Bolt Type
Chain Shackles
■
■
■
Meets the performance requirements of
Federal Specification RR-C-271D, Type IV B,
Class 3, Grade A, Amendment 1.
Hot galvanized, forged carbon steel, heat treated,
with alloy bolts,
Permanently marked with size and Working Load Limit.
Size
A
(in.)
Working
Load Limit
(tons)
Bolt
Diameter B
(in.)
Length
Inside C
(in.)
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/2
3
3-1/2
2
3-1/4
4-3/4
6-1/2
8-1/2
9-1/2
12
13-1/2
17
25
35
55
85
120
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
2
2-1/4
2-3/4
3-1/4
3-3/4
1-5/8
2
2.3/8
2-13/16
3.3/16
3-9/16
3-15/16
4-7/16
4-7/8
5-3/4
6-3/4
8
9
10-1/2
Width Between Eyes D
Nominal
13/16
1-1/16
1-1/4
1-7/16
1-11/16
1-13/16
2-1/32
2-1/4
2-3/8
2-7/8
3-1/4
4-1/8
5
5-1/2
Tolerance
± 1/16
± 1/16
± 1/16
± 1/16
± 1/8
± 1/8
± 1/8
± 1/8
± 1/8
± 3/16
± 3/16
± 1/4
± 1/4
± 1/4
E
Approx.
Weight Each
(lbs.)
1-3/8
1-7/8
2-1/8
2-3/8
2-5/8
2-7/8
3-1/4
3-1/2
3-3/4
4-1/2
5-1/4
6-1/4
6-3/4
8-1/2
.91
1.72
2.70
3.94
5.75
8
10.5
13.1
18.3
29.3
44.3
94
125
250
U.S. Registered Trademark No. 2,011,393
*
The YELLOW shackle bolt is the Federally Registered Trademark of Kulkoni, Inc.
** Minimum Width Between Eyes as defined by Federal Specification RR-C-271D, Amendment 1.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
372
7/3/13 9:40 AM
C
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
.26
.31
.38
.44
.50
.63
.75
.88
1
1.13
1.38
.41
.47
.53
.66
.72
.82
1.02
1.25
1.48
1.70
2.03
Weight
D
lbs.
lbs.
.83
1.11
1.20
1.41
1.77
1.83
2.41
2.84
3.30
3.80
4.69
650
1,000
1,300
1,500
2,000
3,000
4,000
6,000
8,000
10,000
14,000
.05
.10
.17
.30
.50
.71
1.39
2.31
3.64
5.18
9.88
Hoists
B
S0116-FS05
S0116-FS07
S0116-FS08
S0116-FS10
S0116-FS12
S0116-FS13
S0116-FS16
S0116-FS20
S0116-FS22
S0116-FS25
S0116-FS32
WLL
Services
A
Size
(in.)
Engineered
Products
Dimensions
(in.)
Item
ON PAGES 454 - 461.
Overhead
Cranes / Jibs
WARNING
Stainless Steel Shackles—
Type 304
Screw Pin
Hardware
Slings
Grade: 316NM Stainless Steel I/A/W Fed Spec RR-C-271D, Type IVA, Class 3, Except 316
Stainless, Drop Forged & Load Rated
This anchor shackle is made from grade 316 NM stainless steel
and features an oversize screw pin. Stainless steel anchor shackles
are ideal for salt water applications. The anchor shackle is primarily
used to connect the anchor to the chain.
Design-A-Shackle
Custom Shackle
F
B
Wire
Rope
Lifting
Products
Bolt Type
Capacity ________________________________________
Style ___________________________________________
A.____________________________________________
Cordage
C
C.____________________________________________
A
D.____________________________________________
Chain
Style
E.____________________________________________
A
Anchor
Style
Contact us with your dimensions, using the
drawing on the right side of this page.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
F.____________________________________________
E
Load
Securement
D
B.____________________________________________
373
7/3/13 9:40 AM
Swivel Hoist Ring
U.S. Patent 5,352,056
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Available in UNC and Metric thread sizes.
UNC threads available in sizes from 800 pounds to 100,000 pounds Working Load Limit, with a design
factor of 5 to 1.
Metric threads available in sizes from 400 kg to
16,900 kg and dual rated in both a 4 to 1 and
5 to 1 design factor.
All Components are Alloy Steel - Quenched
and Tempered.
Rated at 100% at 90° angle.
100% individually proof tested to 2-1/2 times the
Working Load Limit with certification and Statistically Magnetic Particle inspected. (Can be furnished 100% Magnetic Particle inspected when requested at
time of order.)
Each product has a Product Identification Code (PIC)
for material traceability, along with a Working Load Limit and the name Crosby or “CG” stamped into it.
Meets or exceeds all the requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly,
these hoist rings meet other critical performance
ASME B30.26.
360° swivel and 180° pivot action.
Fatigue rated to 20,000 cycles at 1-1/2 times the
Working Load Limit.
Individually packaged along with proper application instructions and warning information.
Bolt is secured with E-clip, threads are grooved. This method allows for easy disassembly and assembly
of hoist ring for thorough examination of all components. Replacement kits are available.
Bolts are individually Proof Tested.
Multiple Bolt length available to meet specific
application requirements.
Zinc Plated (Yellow Chromate) finish for increased
corrosion protection thru 30,000 pounds size.
Also available in Stainless Steel
Color coded to distinguish between UNC (Red)
and Metric (Silver) thread types.
HR-125
HR-125 M
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
374
7/3/13 9:40 AM
■
Hoists
Top washer has the following features:
- The Working Load Limit and Recommended Torque value are permanently stamped into each washer.
- Washer is color coded for easy identification:
Red - UNC thread.
■ Individually Proof Tested to 2-1/2 times
Working Load Limit.
■ Bolt specification is a Grade 8 Alloy socket head cap screw to ASTM A 574. All threads listed are UNC.
■ BOLT SIZE IDENTIFICATION: The size of the bolt
will be stated as in the drawing below. Illustration shows meaning of each dimension given.
■ Frame 2 and larger are RFID EQUIPPED.
■ Also available in Stainless Steel.
ON PAGES 454 - 461.
Overhead
Cranes / Jibs
WARNING
UNC Swivel Hoist Rings
*
** 800
1,000
2,500
2,500
4,000
4,000
5,000
5,000
7,000 **
7,000 **
8,000
8,000
10,000
10,000
15,000
24,000
30,000
50,000
75,000
100,000
Effective
Thread
Projection
Length
B
C
7
12
28
28
60
60
100
100
100
100
160
160
230
230
470
800
1,100
2,100
4,300
5,100
5/16 - 18 x 1.50
3/8 - 16 x 1.50
1/2 - 13 x 2.00
1/2 - 13 x 2.50
5/8 - 11 x 2.00
5/8 - 11 x 2.75
3/4 - 10 x 2.25
3/4 - 10 x 2.75
3/4 - 10 x 2.75
3/4 - 10 x 3.50
7/8 - 9 x 2.75
7/8 - 9 x 3.50
1 - 8 x 3.00
1 - 8 x 4.00
1-1/4 - 7 x 4.50
1-1/2 - 6 x 6.75
2 - 4-1/2 x 6.75
2-1/2 - 4 x 8.00
3 - 4 x 10.5
3-1/2 - 4 x 13.0 #
.58
.58
.70
1.20
.70
1.45
.95
1.45
.89
1.64
.89
1.64
1.14
2.14
2.21
2.73
2.73
4.00
5.00
7.00
2.72
2.72
4.85
4.85
4.85
4.85
4.85
4.85
6.57
5.57
6.57
6.57
6.57
6.57
8.72
12.55
12.55
16.88
19.50
22.09
Ultimate Load is 5 times the Working Load Limit.
Ultimate Load is 4.5 times the Working Load Limit for 7000# Hoist Ring
when tested in 90 degree orientation.
†
‡
#
D
Radius
E
Dia.
F
G
H
Weight
Each
(lbs.)
.97
.97
1.96
1.96
1.96
1.96
1.96
1.96
2.96
2.96
2.96
2.96
2.96
2.96
3.71
4.71
4.71
5.75
7.25
7.75
.46
.46
.87
.87
.87
.87
.87
.87
1.36
1.36
1.36
1.36
1.36
1.36
1.75
2.39
2.39
3.00
3.75
4.00
.34
.34
.69
.69
.69
.69
.69
.69
.94
.94
.94
.94
.94
.94
1.19
1.75
1.75
2.25
2.75
3.25
1.87
1.87
3.35
3.35
3.35
3.35
3.35
3.35
4.87
4.87
4.87
4.87
4.87
4.87
6.18
8.48
8.48
11.0
14.16
15.91
1.12
1.05
2.29
2.29
2.16
2.16
2.04
2.04
2.97
2.97
2.84
2.84
2.72
2.72
3.93
5.52
5.02
8.03
8.50
9.28
.37
.39
2.33
2.36
2.41
2.47
2.52
2.59
6.72
6.81
6.84
6.96
7.09
7.31
14.51
37.73
40.69
88.0
166.0
265.0
Long Bolts are designed to be used with soft metal (i.e., aluminum) work piece. While the long bolts may also be used with ferrous metal (i.e.,steel
and iron) work piece, short bolts are designed for ferrous work pieces only.
Bolt specification is a Grade 8 Alloy socket head cap screw to ASTM A 574.
Hex head bolt used on Frame 8 (100,000 lb.) Hoist Ring.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Lifting
Products
1016887
1016898
1016909
1016912
1016920
1016924
1016931
1016935
1016942
1016946
1016953
1016957
1016964
1016969
1016975
1016986
1016997
1017001
1017005
1017009
Bolt Size
A‡
Wire
Rope
1†
1†
2
2†
2
2†
2
2†
3
3†
3
3†
3
3†
4
5
5
6
7
8
Torque
in
Ft. Lbs.
Cordage
HR-125
Stock
No.
Load
Securement
Frame
Size
No.
Contractors
Supply
Dimensions (in.)
Working
Load
Limit
(lbs.) *
Fall
Protection
HR-125 UNC Threads
Hardware
Slings
Engineered
Products
Services
HR-125
375
7/3/13 9:40 AM
WARNING
Metric Swivel
Hoist Rings
Top washer has the following features:
- The Working Load Limit and Recommended Torque value are permanently stamped into each washer.
- Washer is color coded for easy identification:
Silver - Metric thread.
■ Individually Proof Tested to 2-1/2 times
Working Load Limit.
■ Bolt specification is a Grade 12.9 Alloy socket head
cap screw to Din 912. All threads listed are metric (ASME/ANSI B18.3.1m).
■ Designed to be used with ferrous work piece only.
■ BOLT SIZE IDENTIFICATION: The size of the bolt
will be stated as in the drawing below. Illustration shows meaning of each dimension given.
■ Frame 2 and larger RFID EQUIPPED.
■ Also available in Stainless Steel.
ON PAGES 454 - 461.
■
HR-125 M
HR-125 M Metric Threads
*
†
‡
Frame
Size
No.
HR-125
M
Stock
No.
1
1
2
2
2
3
3
4
5
5
5
1016602
1016613
1016624
1016635
1016644
1016657
1016668
1016679
1016690
1016701
1016712
Working
Load Limit
(kg)
Dimensions (mm)
At a 5:1
Design
Factor †
At a 4:1
Design
Factor †
400
450
1,050
1,900
2,150
3,000
4,200
7,000
11,000
12,500
13,500
500
550
1,300
2,400
2,700
3,750
5,250
8,750
13,750
15,600
16,900
Torque
in
Nm *
Bolt Size
A‡
Effective
Thread
Projection
Length
B
10
16
38
81
136
136
312
637
1,005
1,005
1,350
M8 x 1.25 x 40
M10 x 1.50 x 40
M12 x 1.75 x 50
M16 x 2.00 x 60
M20 x 2.50 x 65
M20 x 2.50 x 75
M24 x 3.00 x 80
M30 x 3.50 x 120
M36 x 4.00 x 150
M42 x 4.50 x 160
M48 x 5.00 x 160
16.7
16.7
16.9
26.9
31.9
27.8
32.8
61.7
60.3
70.3
70.3
C
69.2
69.2
123
123
123
167
167
222
316
316
316
D
Radius
E
Dia.
F
G
H
Weight
Each
(kg)
24.6
24.6
49.8
49.8
49.8
75.2
75.2
94.2
120
120
120
11.7
11.7
22.1
22.1
22.1
34.5
34.5
44.5
60.7
60.7
60.7
8.5
8.5
17.5
17.5
17.5
25.4
25.4
30.5
44.5
44.5
44.5
47.5
47.5
85.1
85.1
85.1
124
124
157
215
215
215
28.2
26.2
58.9
54.9
50.9
74.4
70.4
101
145
139
133
.17
.18
1.05
1.11
1.17
3.09
3.21
6.53
16.8
17.4
18.0
The tightening torque values shown are based upon threads being clean, dry and free of lubrication.
Individually proof loaded to 2-1/2 times the Working Load Limit based on the 4:1 design factor.
Bolt specification is a Grade 12.9 Alloy socket head cap screw to Din 912. All threads are metric (ASME / ANSI B18.3.1m).
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
376
7/3/13 9:40 AM
Overhead
Cranes / Jibs
Forged bail provides the following:
-
Easily readable “Raised Lettering” showing the name Crosby or “CG” and PIC Code for material traceability.
-
Greater durability providing the increased “Toughness”
desired in potentially abusive field conditions.
-
Larger opening than standard Hoist Ring bail.
Top washer is color coded for easy identification (Red for UNC threads and Silver for Metric threads)
The Working Load Limit and Recommended Torque value are permanently stamped into each washer.
Individually Proof Tested to 2-1/2 times Working Load Limit.
Available in both UNC Thread and Metric Thread style.
BOLT SIZE IDENTIFICATION: The size of the bolt will be stated
as in the drawing below. Illustration shows meaning of each
dimension given.
Frame 2 and larger are RFID EQUIPPED.
Services
HR-1000
Engineered
Products
■
■
■
■
■
■
■
ON PAGES 454 - 461.
Hoists
WARNING
Heavy Lift Swivel
Hoist Rings
7
12
28
28
60
60
100
100
100
100
160
160
230
230
470
800
5/16 - 18 x 1.50
3/8 - 16 x 1.50
1/2 - 13 x 2.25
1/2 - 13 x 2.75
5/8 - 11 x 2.25
5/8 - 11 x 3.00
3/4 - 10 x 2.50
3/4 - 10 x 3.00
3/4 - 10 x 3.00
3/4 - 10 x 3.50
7/8 - 9 x 3.00
7/8 - 9 x 3.50
1 - 8 x 3.50
1 - 8 x 4.50
1-1/4 - 7 x 5.00
1-1/2 - 6 x 6.50
.52
.52
.69
1.19
.69
1.44
.94
1.44
.85
1.35
.85
1.35
1.35
2.35
2.09
2.59
3.69
3.69
6.26
6.26
6.26
6.26
6.26
6.26
8.66
8.66
8.66
8.66
8.66
8.66
11.21
11.21
D
Dia.
F
G
H
Weight
Each
(lbs.)
.97
.97
1.96
1.96
1.96
1.96
1.96
1.96
2.96
2.96
2.96
2.96
2.96
2.96
3.71
4.71
.62
.62
1.25
1.25
1.25
1.25
1.25
1.25
1.63
1.63
1.63
1.63
1.63
1.63
2.00
2.00
.44
.44
.62
.62
.62
.62
.62
.62
1.00
1.00
1.00
1.00
1.00
1.00
1.25
1.25
2.27
2.27
4.20
4.20
4.20
4.20
4.20
4.20
6.25
6.25
6.24
6.24
6.24
6.24
7.82
7.82
1.38
1.38
2.50
2.50
2.50
2.50
2.50
2.50
3.25
3.25
3.25
3.25
3.25
3.25
4.00
4.00
.60
.62
3.05
3.07
3.11
3.18
3.24
3.30
10.09
10.21
10.21
10.40
10.50
10.72
21.90
23.00
HR-1000 Metric Threads
Frame
Size
No.
HR1000M
Stock
No.
1
1
2
2
2
3
3
4
4
1068307
1068316
1068325
1068334
1068343
1068352
1088361
1068370
1068369
*
*** ‡
Working
Load Limit
(kg) *
Hardware
C
Radius
E
Lifting
Products
800
1,000
2,500
2,500
4,000
4,000
4,000
5,000
5,000
7,000 **
7,000 **
8,000
8,000
10,000
15,000
24,000
Effective
Thread
Projection
Length
B
Dimensions (mm)
At a 5:1
Design
Factor ***
At a 4:1
Design
Factor ***
400
450
1,050
1,900
2,150
3,000
4,200
7,000
11,000
500
550
1,300
2,400
2,700
3,750
5,250
8,750
13,750
Torque
in
Nm
Bolt Size
A‡
Effective
Thread
Projection
Length
B
10
16
38
81
136
136
312
637
1,005
M8 x 1.25 x 40
M10 x 1.50 x 40
M12 x 1.75 x 55
M16 x 2.00 x 65
M20 x 2.50 x 70
M20 x 2.50 x 80
M24 x 3.00 x 90
M30 x 3.50 x 140
M36 x 4.00 x 130
15.2
15.2
15.5
25.5
30.5
25.4
35.4
66.2
56.2
C
D
Radius
E
Dia.
F
G
H
Weight
Each
(kg)
93.7
93.7
162
162
162
220
220
285
285
24.6
24.6
49.8
4938
49.8
75.2
75.2
94.2
94.2
15.7
15.7
31.8
31.8
31.8
41.4
41.4
50.8
50.8
11.2
11.2
19.1
19.1
19.1
25.4
25.4
31.8
31.8
57.7
57.7
107
107
107
159
159
199
199
35.1
35.1
63.5
63.5
63.5
82.6
82.6
102
102
.3
.3
1.5
1.5
1.6
4.6
4.8
9.7
10.2
Ultimate Load is 5 times the Working Load Limit. ** Ultimate Load is 4.5 times the Working Load Limit for 7000# Hoist Ring when tested in 90 degree orientation.
Individually proof loaded to 2-1/2 times the Working Load Limit based on the 4:1 design factor. † Long Bolts are designed to be used with soft metal (i.e., aluminum)
work piece. While the long bolts may also be used with ferrous metal (i.e.,steel & iron) work piece, short bolts are designed for ferrous work pieces only.
Bolt specification is a Grade 8 Alloy socket head cap screw to ASTM A 574. ‡‡ Bolt specification is a Grade 12.9 Alloy socket head cap screw to DIN 912.
Note: The tightening torque values shown are based upon threads being clean, dry and free of lubrication.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Cordage
1068002
1068006
1068010
1068014
1068018
1068022
1068026
1068030
1068034
1068038
1068042
1068046
1068050
1068054
1068058
1068062
Bolt Size
A‡
Load
Securement
1
1
2
2†
2
2†
2
2†
3
3†
3
3†
3
3†
4
4
Torque
in
Ft. Lbs.
Contractors
Supply
HR-1000
Stock
No.
Fall
Protection
Frame
Size
No.
Wire
Rope
Dimensions (in.)
Working
Load
Limit
(lbs.) *
Slings
HR-1000 UNC Threads
377
7/3/13 9:40 AM
Safety Engineered
Hoist Rings
Material:
Alloy steel with minimum
tensile strength of 180,000 PSI.
Heavy Duty®
Hoist Rings
Design Factor:
5:1, Magnetic Particle Inspected
Per ASTM 1444, Hoist Rings
retain the same rated load from
0 to 90 degrees from the bolt axis,
Standard tolerance +/- .030 inch
unless otherwise specified.
Material:
Forged alloy steel with
minimum tensile strength
of 180,000 PSI.
Design Factor:
Minimum Design Factor = 5:1,
Magnetic Particle Inspected
Per ASTM 1444, Hoist Rings
retain the same rated load
from 0 to 90 degrees from
the bolt axis
Finish:
Black Oxide Finish for corrosion resistance, also available
in Cadmium, Titanium-Cadmium, Nickel and other plating.
Range of Movement:
Swivel 360°, Pivot 180° under Load
Range of Movement:
Patent Numbers:
5,848,815
Specifications:
Meets Military Specification No. MIL-STD 209,
Meets ANSI / ASME B30.26
Available in sizes from:
■ Standard Sizes:
-3/8" U-Bar (thread size 1/4"-20) to
5" U-Bar (thread size 6"-4)
-Rated load from 550 to 250,000 pounds
-Long Bar Models are available
■ Metric Sizes:
- Thread sizes from M8 x 1.25 to M90 x 6.00
- Rated load from 400 kg to 51,000 kg
- Long Bar Models are available
Finish:
Black Oxide Finish for corrosion resistance,
Also available in a wide range of plating—
e.g Cadmium, Titanium-Cadmium, Nickel, etc.
Typical Applications:
ADB's HEAVY DUTY® Hoist Rings are specified and
used in nuclear energy equipment
Patent:
#5,405,210
■ Standard Sizes:
- .44" U-Bar (thread size 1/4"-20) to
1.25" U-Bar (thread size 2"-8)
- Rated load from 550 to 30,000 pounds
■ Metric Sizes:
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
378
7/3/13 9:40 AM
Overhead
Cranes / Jibs
Side Pull
Hoist Rings
Finish:
Black Oxide Finish for corrosion resistance
Range of Movement:
■ Standard Sizes:
- 3/8" U-Bar (thread size 5/16"-18)
to 1-1/2" U-Bar (thread size 2"-8)
■ Metric Sizes:
- Thread sizes from
M8 x 1.25 to M64 x 6.00
- Rated load from
400 kg to 25,000 kg
Finish:
Black Oxide finish for corrosion resistance
Also available in a wide range of plating—
Cadmium, Titanium-Cadmium, Nickel, etc.
■ Standard Sizes:
- 1.25" U-Bar (thread size 1-1/4"-7)
to 5" U-Bar (thread size 6"-4)
- Rated load from 15,000 to
250,000 pounds
■ Metric Sizes:
- Thread sizes from
M30 x 3.50 to M90 x 6.00
- Rated load from 7,000 kg
to 51,000 kg
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Hardware
Lifting
Products
Wire
Rope
Patent Numbers:
5,848,815
Cordage
Typical Applications:
ADB, the originator and leader in safety hoist rings,
introduces another time and money saving innovation.
ADB's new EZ-Torque® Hoist Ring eliminates the need of
locating and installing hydraulic torque multipliers for large
hoist ring installations. A 75,000 lb. rated load hoist ring
requires the mounting screw to be torqued to 4,300 ft. lbs.
Using ADB's EZ-Torque® Hoist Ring requires only a
standard torque wrench and 92 ft. lbs. of torque per bolt!
Slings
Engineered
Products
Specifications:
Meets Military Specification No.
MIL-STD 209J, Meets ASME B30.26
Design Factor:
5:1, Magnetic Particle Inspected
Per ASTM 1444. Hoist Rings
retain the same rated load from
0 to 90 degrees from the bolt axis.
Load
Securement
Range of Movement:
Swivel 360° Under Load
Services
Material:
Alloy steel with minimum
tensile strength of 180,000 PSI.
Contractors
Supply
Design Factor:
5:1, Magnetic Particle
Inspected
Hoists
E-Z® Torque
Hoist Rings
Fall
Protection
Material:
Alloy Steel
(Certified Heat Treat)
379
7/3/13 9:40 AM
Stainless Steel
Safety Hoist Rings
■
■
■
■
■
■
Actek swivel hoist rings are
designed for lifting. They rotate
and pivot to absorb any pitch,
roll or sway of unbalanced loads.
Will not yield to heavy side loads.
Help prevent the lifting hook
from disengaging.
Safety Engineered. All loads lifted are especially important from a safety standpoint. Actek swivel hoist rings provide the kind of safety that protects men
and material against accidents before they occur.
For use in outdoor weather and certain chemical and corrosive environments.
Material: 300 Series Stainless Steel.
Safety Factor: 5:1.
Liquid Penetrant MIL 6866.
Safety Swivel
Hoist Rings
Actek Mfg. & Eng. Inc. hoist rings
are manufactured using AISI 4140
Aircraft Quality Chrome-Moly,
which meet or exceed ASTM A322.
All Actek 4140 material is
metallurgically analyzed and
certified. All Actek hoist rings
are heat treated to MIL-H-6875
and magnetic particle inspected to accordance with
ASME Section 5, Article 7. Actek hoist rings meet or
exceed all the requirements of ASME B30.26.
■ Standard Sizes:
- Thread sizes from 5/16"-18 to 3-1/2"-4
■ Metric Sizes:
Actek swivel hoist rings include safety-engineered style,
forged style, and stainless steel hoist rings. We offer
different plating options also. Other hoist rings include side
load, flip-flop, mold-handler, speed base, round base,
pivot plate hoist rings. Custom made hoist rings are also
available to suit all of your lifting needs.
Each Actek hoist ring is 200% Proof-load Tested and
individually serial numbered for better trace-ability.
Each hoist ring is individually packaged, shipped with
a certificate of conformance, safety precaution, and
additional safety information.
Side Pull Hoist Rings
■
■
■
■
■
■
■
■
■
■
Designed for side-mounted applications
Smooth swiveling and pivoting action.
Aircraft Quality “Chrome Moly”,
Strong & Tough.
Extra large ring accepts many
styles and sizes of hoist hooks.
Ideal for stamping and injection
mold industries.
Magnetic particle inspected.
Rated loads from 650 lbs. to 29,000 lbs.
Thread size from 5/16" to 2”
Safety Factor: 5:1
Also available in Metric Sizes
Swivel Hoist Rings are designed for lifting at any angle
because they can swivel 360° and pivot 180°. Therefore,
the rated load remains the same, regardless of the angle
of force. As a result, you increase safety and peace of
mind. Hoist rings are available with a rated load ranging
from 800 lbs. to 250,000 lbs. with a 5:1 design safety factor.
■ Standard Sizes:
- 3/8" U-Bar (thread size 1/4"-20) to
5" U-Bar (thread size 6"-4)
■ Metric Sizes:
- Rated load from 9,500 kg to 44,600 kg
■ Standard Sizes:
- Thread sizes from 5/16"-18 to 2"-8
■ Metric Sizes:
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
380
7/3/13 9:40 AM
Overhead
Cranes / Jibs
Traditional Center Pull
Hoist Rings
Shackle-LokTM Hoist Ring
Hoists
Engineered
Products
Slings
Load
Securement
Cordage
Internal ball bearings (440 Stainless Steel) allow
for smooth rotation under load
Full 360° Swivel and 180° Pivot Action
Easy to remove shackle
Rated 5:1 Strength Factor in Vertical Pull
Bolt & Base Material: Alloy Steel 4140; C40-44
Bolt and Base Finish: Black Oxide
Bolt and Base are Magnetic Particle Inspected
Shackle & Shackle Pin: 1035 Carbon Steel; C18-24
Shackle Finish: Zinc Plated with Gold Colored
Conversion Coating
Proof Tested to 200% of Rated Load Capacity
Certificate of Proof Test provided
Also available in Metric sizes
Contractors
Supply
■
■
■
■
■
■
■
■
■
■
■
■
Wire
Rope
Jergens Shackle-LokTM combines
the strength of a hoist ring with
the versatility of a shackle. Its unique,
3-piece design is ideal for use with
a variety of lift methods, and shackles
are interchangeable. Shackle-LokTM
is simply the industry’s most efficient
below-the-hook lifting device from a
weight-to-load rating ratio.
Convenient part handling
Rated at 5:1 Strength Factor
Material: Alloy Steel
Clevis, Ring, Bushing and Cap Screw are
magnetic particle inspected
Clevis is x-rayed
Finish: Black Oxide
200% Proof Tested
Available in FixtureProTM Design Software
and PartSpec CD
Stated load capacity based on specific thread
torques as shown in chart.
It is recommended that these torques be used
when installing hoist rings.
CE Certified
Ask about different finishes / coatings
Hardware
■
■
■
■
■
■
■
■
■
■
■
■
■
Services
The full swivel and pivot action
of the Jergens Hoist Ring allows
you to flip and turn parts
without unhooking. Plus, the
extra-large diameter rings
let you use almost any size hook.
Full 360° Swivel and 180° Pivot Action
Rated at 5:1 Strength Factor
Material: Alloy Steel
Finish: Black Oxide (Except Washer)
U-Bar, Bolt, Pins, Base, Washer and Bushing
are Magnetic Particle Inspected
Washer: Zinc Plated with Gold Colored (Inch),
Clear / Blue (Metric) Conversion Coating
Proof Tested to 200% of Rated Load Capacity
Certificate of Proof Test provided
3D Solid Models available in multiple formats
CE Certified
Long Bar sizes available
Ask about different finishes / coatings
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
■
■
■
■
■
■
■
■
■
■
■
■
■
Side Pull Style
Hoist Rings
Lifting
Products
Popular sized hoist rings
(1/2-13 through 1-8) are offered
with two or more length bolts.
Use the longer lengths with softer
parent materials, the shorter lengths
with hard materials, such as steel.
381
7/3/13 9:40 AM
WARNING
WBG-V
Load Ring Bolted
ON PAGES 454 - 461.
360° Swivelling / 180° Pivoting
Complies with the machinery directives 2006/42/EG
Swivelling lifting point:
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Loadable in any direction. Safety factor 4:1.
Turnable under load in vertical direction.
Not suitable for permanent swivelling under full load,
especially in 90° direction.
Simple installation, just a thread hole is required.
Variable lengths (Vario) available.
Can also be used for through holes.
Bolts 100% magnetic crack detected. Surface protection
CORRUD-DT (20 times better than zinc plating).
High tensile, approved suspension ring acc. EN 1677-4.
Surface: Ring red powder coating, housing zinc plated.
Type Vario with washer and 100% crack detected nut.
WBG-V and WBG are also available with Imperial thread.
Turning without jerk due to additional bush bearing washer.
Wear marks in the main load directions 45°, 60° and 90°.
Frame 2 and larger are RFID EQUIPPED.
Nominal WLL worst case.
Ring not adjusted
to pull direction
Measurements in Inches
Ref. No.
Stand.
Ref. No.
Vario with
Washer
and Nut
A
B
C
D
E
F
Stand.
G
M
SW
X
Weight
Stand.
(lbs.)
660 (880)
[1320]
5/16
1-5/16
1-5/32
1-3/16
3
1/2
1-27/64
5/16
1-1/8
45/64
0.57
7991090
–
VWBG-V
0.45-3/8"-16UNC
990 (1300)
[1980]
5/16
1-5/16
1-5/32
1-27/64
3-1/16
43/64
1-1/2
3/8
1-3/16
3/4
0.64
7991091
–
VWBG-V 0.35/16"-13UNC
1,320 (1,650)
[2,640]
3/8
2
1-3/8
1-21/32
4-1/8
13/16
1-25/32
1/2
1-27/64
3/4
0.9
7991092
–
VWBG-V
1.3-5/8"-11UNC
2,860 (3,300)
[5,720]
1/2
1-7/8
1-1/2
1-7/8
4-13/32
1-5/32
2-1/8
5/8
1-5/8
1-7/64
1.3
7991093
–
VWBG-V
2.0-3/4"-10UNC
4,400 (5,500)
[8,800]
1/2
2-3/16
1-3/8
2-1/2
5-5/16
1-1/8
2-9/16
3/4
2-5/32
1-3/16
3.09
7991094
–
VWBG-V
3.5-1"-8UNC
7,700 (8,800)
[15,400]
11/16
2-11/16
1-9/16
3-3/16
6-25/32
1-1/2
3-7/16
1
2-3/4
63/64
5.8
7991095
–
VWBG-V
5.0-1-1/4"-7UNC
11,000 (13,200)
[22,000]
7/8
2-3/16
1-31/32
3-7/8
8-11/16
1-7/8
4/18
1-1/4
3-11/32
1-1/4
11.22
7991096
–
VWBG-V
0.3-5/16"-18UNC
Torque
According to the user instructions
Type
WLL
(lbs.)
Manually adjusted
- increased WLL ( )-values.
Vertical load
(straight pull) - double
nominal WLL -
Please Note: It can happen, that during use, the lifting point can engage in any position. That´s why the WLL is embossed for the worst case
situation. The ring can be manually adjusted to the direction of pull, then the WLL values in the brackets ( ) can be used.
Attention: Refer to RUD user instructions.
The WLL (Working Load Limit) is listed at the nominal value (worst case scenario) unless otherwise specified.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
382
7/3/13 9:40 AM
ON PAGES 454 - 461.
Hoists
360° Swivelling / 180° Pivoting
with a Ball Bearing
Overhead
Cranes / Jibs
WARNING
WBG
Load Ring Bolted
For heavy loads, which have to be turned and swivelled.
Nominal WLL worst case.
Ring not adjusted
to pull direction
8 (10)
[15]
7/8
3-3/8
1-31/32
3-17/32
8-3/16
2-1/4
11-1/2
3-11/16
1-1/2
3-1/8
10.6
8600451
Per
Request
VWBG 12(13)
t-1-3/4"-5UNC
12 (13)
[17]
1
4-13/32
2-9/16
3-27/32
9-1/4
2-5/8
11-1/2
3-3/4
1-3/4
3-11/32
13.5
8600452
Per
Request
VWBG 13(16)
t-2"-4.5UNC
13 (16)
[18]
1
4-13/16
2-9/16
3-27/32
9-1/4
3
11-1/2
3-3/4
2
3-11/32
13.5
8600453
Per
Request
VWBG 16(22)
t-2-1/4"-4.5UNC
16 (22)
[28]
1-1/4
4-11/16
2-3/4
4-3/4
10-25/32
3-11/32
11-1/2
4-3/4
2-1/4
3-3/4
24.3
8600454
Per
Request
VWBG 16(22)
t-2-1/2"-4UNC
16 (25)
[28]
1-1/4
4-11/16
2-3/4
4-3/4
10-25/32
4-3/32
11-1/2
4-3/4
2-3/4
3-3/4
26.5
8600455
Per
Request
VWBG 31.5(25)
t-3"-4UNC
31.5 (40)
[50]
1-13/16
5-1/8
3-17/32
6-11/16
13-5/16
4-1/2
11-1/2
6-1/4
3
5-11/16
58.1
8600456
Per
Request
VWBG 35(48)
t-3-1/2"-4UNC
30 (48)
[50]
1-13/16
5-1/8
3-17/32
6-11/16
13-5/16
5-15/64
11-1/2
6-1/4
3-1/2
5-11/16
61.9
8600457
Per
Request
VWBG 40(50)
t-4"-4UNC
40 (50)
[50]
1-13/16
5-1/8
13-5/16
6-11/16
13-5/16
5-7/8
11-1/2
6-1/4
4
5-11/16
8600157
Per
Request
C
ØD
E
F
G
M
SW
Torque
According to the user instructions
B
vario *
Max.
Weight
(lbs.)
66.3
F
F
vario *
Manually adjusted
- increased WLL ( )-values.
Wire
Rope
VWBG 8(10)
t-1-1/2"-6UNC
A
F
Vertical load
(straight pull)
CAUTION: During lifting, the ring of the lifting point can engage in any position. The embossed WLL is for the worst case scenario.
If the ring is manually adjusted to the horizontal position, higher WLL values in brackets ( ) can be chosen. In case of straight pull
(vertical load direction) Maximum WLL can be chosen.
Contractors
Supply
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
Cordage
WLL
(lbs.)
Lifting
Products
Ref. No.
Type
Load
Securement
Hardware
Slings
Safety Notice:
Please provide plain bolting surface. The countersunk for the
thread should be: thread diameter plus 4 mm (15 inch). The base
material of the workpiece must be capable to withstand the
occurring lifting forces. Minimum required material = ST 37 (1.0037).
Engineered
Products
Services
With ball bearings. Swivels under full load.
Not suitable for permanent swivelling under full load,
especially in 90° direction.
Loadable in any direction. Safety factor 4:1.
Suspension ring manufactured acc. EN 1677-4 grade 80
(100% magnetic crack detected and proof loaded).
S = max. allowed gap.
WBG New: Wear marks in the main load directions
45°, 60° and 90°.
KCI Crane Service
Fall
Protection
■
■
■
■
■
■
383
7/3/13 9:40 AM
WARNING
VLBG
Load Ring Bolted
ON PAGES 454 - 461.
... Will Turn 360°
■
■
■
■
■
■
■
■
■
■
■
■
UD Universal bolts and nuts for VLBG - 100% crack detected.
R
The hex-head-bolt is suitable for internal and external wrench mounting for types with metric threads.
Surface protection: CORRUD - DT - at least 20 times better
corrosion protection than zinc plating (except for the spot face)
after length shortening.
Thread over whole bolting length "H".
Bolt is held captive in the body. Replace only with the same
quality class bolt.
Clear identification at the bolt head: RUD, thread size, quality class.
The load ring must be installed perpendicular to the workpiece. The workpiece must be flat, providing complete contact for the load ring bushing.
Load ring has to be adjusted in pull direction, free to move and must not support on edges.
Use according to user instructions and by trained persons.
The lifting attachment must be free to move when attached
to the load ring.
Regular inspections should be carried out by a competent person (BGR 500).
Load should not be turned during lifting.
Weight
Torque
Nom.
WLL
(lbs.)
A
B
C
D
E
F
G
H
J
K
L
M
SW
R
T
DB
lbs.
ftlbs.
LBG-Z
1T 1/2"13UNC
2,200
1-1/4
2-1/8
1-11/32
1-1/2
1-15/32
13/32
1-5/32
7/8
2-15/32
1-25/32
1-31/32
1/2
3/4
1-1/4
2-15/16
1
.72
75
8502349
VLBG-Z
1.5T 5/8"11UNC
3,300
1-5/16
2-3/16
1-13/32
1-13/16
1-1/2
17/32
1-13/32
15/16
3-27/64
1-27/32
2-3/8
5/8
15/16
1-1/2
3-11/32
1-13/16
1.2
110
8502350
VLBG-Z
2.5T 3/4"10UNC
5,500
1-31/32
3-1/4
2-1/8
2-13/64
2-1/8
21-32
1-11/16
1-7/64
4-7/16
2-17/32
2-13/16
3/4
1-1/8
1-7/8
4-11/32
1-3/4
2.85
185
8502351
VLBG-Z
2.5T 7/8"9UNC
5,500
1-31/32
3-1/4
2-1/8
2-9/32
2-3/64
21/32
1-11/16
1-1/16
4-7/16
2-17/32
2-34
7/8
1-5/16
1-7/8
4-11/33
1-3/4
2.85
225
8502352
VLBGZ 4T 1"8UNC
8,800
1-31/32
3-1/4
2-1/8
2-13/32
2-33/64
23/32
1-11/16
1-5/8
5-1/8
3-1/16
3-5/16
1
1-1/2
1-7/8
4-15/16
1-3/4
3.3
300
8502353
VLBG-Z
5T 1-1/4"7UNC
11,000
2-3/8
4-1/16
2-9/16
3-5/32
2-33-64
7/8
2-13/32
1-5/8
5-15/16
3-5/32
4-1/64
1-1/4
1-7/8
2-5/8
5-25/32
2-3/8
7.25
370
8503187
Type
Ref. No.
(Standard)
VLBG Load Ring will turn 360°, adjustable in pull direction. Load ring foldable, full WLL in any load direction, surface pink powder coated.
BG = German Employers Requires: The max. lengths of the RUD - bolts are adjusted in such a way that if a hex-head-shaped nut (DIN EN ISO
7042) is used, assemblies of material thickness of approximately 8 *M (for M8 - M30) and 5 *M for (M36 - M48) can be realized respectively.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
384
7/3/13 9:40 AM
ON PAGES 454 - 461.
■
Slings
Engineered
Products
Services
Hoists
istribution of the load force due to the 2 point fixing, hence an
D
optimized force introduction to the workpiece.
■Forged, suspension ring according to EN 1677-1, electromagnetic
crack detected, pink powder coated. Suspension ring can also be ordered single. For instance VRL 4. This lifting point fulfils
the requirements of the appropriate safety authorities (German Employers Insurance Association). Stamped .
■
Lays flat when not in use.
■
Low profile.
■Rounded well shaped design.
■High dynamic and static strength.
■The welding blocks are forged out of the ideal weldable steel
ST52-3N (S355J2+N) and the nominal WLL is embossed.
■Patented distance lugs assist in achieving the correct
root weld (approx. 3 mm).
■
The weld arrangement (continuous HY weld) fulfils the
requirements of DIN 18800 i.e. the closed weld avoids corrosion and is thus suitable for outdoor use.
RBSB Application
D
E
F
O
Q
X
T
Weld
HV + a
Weight
(lbs.)
Ref.
No.
VRBS 4
8,800
2-29/64
5/8
1-7/64
1-7/8
5-5/16
2-51/64
21/32
3-1/32
9/16
2-9/16
HV 4 + 3
1.8
7992826
VRBS 6.7
15,000
3-15/32
25/32
1-17/32
2-3/8
6-11/16
3-19/32
29/32
3-31/32
19/32
3-5/16
HV 5.5 + 3
4
7992489
VRBS 10
22,000
3-15/32
7/8
1-13/16
2-9/16
7-11/16
3-15/16
1-7/64
4-11/64
7/8
3-3/4
HV 6 + 4
6.2
7992489
VRBS 16
35,200
5-1/8
1-3/16
2-1/4
3-35/64
10-7/16
5-9/32
1-13/32
5-25/32
1-7/64
5
HV 8.5 + 4
14.5
7992490
VRBS 30
66,000
6-19/64
1-21/32
3-5/64
5-1/8
14-49/64
7-43/64
1-55/64
8-21/32
1-29/64
7
HV 15 + 4
42
60267
VRBS 50
110,000
9-7/16
2-3/4
4-23/32
9-1/16
24-13/32
13-3/8
2-9/16
14-31/32
–
12-21/64
HV 25 + 8
120
56834
Type
WLL
(lbs.)
Weld
HV + a
Weight
(lbs.)
Ref.
No.
RBSB
11,000
HV 5 + 3
4
61757
A
B
C
D
E
F
O
P
T
3-9/64
3/4
1-1/2
2-3/8
6-7/16
3-5/8
29/32
7/8
3-5/16
Attention: Refer to RUD user welding instructions.
Contractors
Supply
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
Wire
Rope
C
Cordage
B
Load
Securement
A
KCI Crane Service
Fall
Protection
Nominal
WLL
(lbs.)
Lifting
Products
Hardware
■The weldable load ring with limit stops is available for
EHB containers and machines. The limit stops provide the
necessary support for the ring and thus enabling a
45° hook - in inclined position from the work piece.
■Protects the load from severe damage.
Type
Overhead
Cranes / Jibs
WARNING
VRBS / RBSB
Load Ring For Welding
385
7/3/13 9:40 AM
WARNING
VLBS
Load Ring For Welding
ON PAGES 454 - 461.
■
The VLBS forged out of high tensile CrNiMo - steel with an
innovative design offers many advantages.
-
Up to 50 % higher WLL.
-
The two protective supporting lugs (inside the load ring)
are patented and they improve the connection with
the attachment in addition to the protected clamping spring.
-
The support effect is exceptional, especially if the
ring is side loaded or the lifting point is welded on an
uneven workpiece.
-
Pink powder coating, a VIP recognition attribute and a
heat indicator.
■
Easy and quick to weld assembly.
■
Compact and shapely design.
■
High dynamic and static strength.
■
Forged suspension ring acc. to EN 1677, grade 80,
electromagnetic crack detected, pink powder coated; meets the requirements of the appropriate safety authorities.
■
The welding block has been forged of material 1.0570 (St 52-3)
and clearly stamped with the permissible WLL. The patented
distance lugs assist in achieving the correct root weld.
■
Important: By the special weld design (continuous HV), the
requirements of DIN 18800 are fulfilled, i.e., a closed weld avoids
corrosion and thus suitable for outdoor use.
■
Distinctive features for type LBS-U: A protected spring maintains the load ring in every required position. The parts are assembled in such a way that they remain captive.
■
The spring reduces vibration induced noise.
Type
Nominal
WLL
(lbs.)
A
B
C
D
E
F
G
Weld
H
I
T
Weight
(lbs.)
Ref.
No.
VLBS 1.5
3,300
1-1/4
2-5/8
1-1/2
1
1-9/16
17/32
1-19/64
3-7/16
9/16
2-9/16
HV 5+ 3
0.8
7993035
VLBS 2.5
5,500
1-13/32
3-1/32
1-3/4
1-1/16
1-7/8
17/32
1-19/32
3-13/16
5/8
2-15/16
HV 5+ 3
1.1
7994830
VLBS 4
8,800
1-21/32
3-27/64
2
1-1/4
2-3/64
21/32
1-13/16
4-13/32
45/64
3-16/64
HV 5+ 3
1.8
7993036
VLBS 6.7
15,000
2-13/32
4-15/32
2-5/8
1-47/64
2-7/8
7/8
2-3/8
6-3/16
15/16
4-21/32
HV 5+ 3
4.2
7993037
VLBS 10
22,000
2-61/64
5-5/64
2-5/8
2-5/32
2-51/64
1-3/64
2-3/8
6-13/16
1-3/64
4-31/32
HV 5+ 3
6.4
7993040
VLBS 16
35,300
3-3/4
7-31/64
3-15/16
2-23/32
4-1/8
1-1/64
3-35/64
9-9/16
1-37/64
6-55/64
HV 5+ 3
15
7993041 (w/o spring)
Attention: Refer to RUD user welding instructions.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
386
7/3/13 9:40 AM
Hoists
Services
Amount of
Rope to Turn
Back in Inches
Required
Torque
Ft. Lbs.
Bulk
Packed
Weight
Each
(lbs.)
252 00081
252 00086
252 00091
252 00096
252 00101
252 00106
252 00111
252 00116
252 00121
252 00126
252 00131
252 00136
252 00141
252 00146
252 00147
252 00148
252 00149
1/16
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
2
3
3
3
3
3
3
4
4
4
5
5
6
7
8
8
9
4-3/4
4-3/4
5-1/2
7
7-3/4
9-1/2
10-1/4
15-1/4
16
16
22-1/4
23-1/2
31
39-1/2
50
50
60-1/2
1.5
3.0
4.5
15
15
30
40
45
50
75
75
130
130
200
200
360
360
500/BX
500/BX
500/BX
250/BX
250/BX
250/BX
100/BX
100/BX
100/BG
100/BG
100/BG
50/BG
40/BG
10/BG
10/BG
10/BG
10/BG
.02
.04
.08
.12
.15
.22
.33
.37
.59
.58
.84
1.25
1.56
2.50
3.15
4.45
5.20
252 00151
252 00156
252 00161
252 00166
252 00171
252 00176
252 00181
252 00186
252 00191
252 00196
1/16
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
2
3
3
3
3
3
3
4
4
5
1.5
3.0
4.5
15
15
30
40
75
75
75
25/BX
25/BX
25/BX
25/BX
25/BX
25/BX
25/BX
25/BX
10/BX
10/BX
.02
.04
.08
.12
.15
.22
.33
.37
.59
.84
Zinc plated—Boxed Qty.
Never use malleable clips for critical, heavy-duty or overhead loads!
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
WARNING:
4-3/4
4-3/4
5-1/2
7
7-3/4
9-1/2
10-1/4
15-1/4
16
22-1/4
Engineered
Products
Minimum
Number of
Clips Per Eye
Slings
Trade
Size
(in.)
Hardware
Part
Number
Lifting
Products
Zinc plated—Bulk
Wire
Rope
■
■
Intended for use in making eye termination in right
regular lay wire rope. Such an assembly is for
non-critical light-duty use where a small applied load
is expected. For this reason, an efficiency of the
termination is not stated.
Cast iron base.
Steel U-bolt and nuts.
Cordage
Load
Securement
■
ON PAGES 454 - 461.
Overhead
Cranes / Jibs
WARNING
Malleable Clips—
Zinc plated
387
7/3/13 9:40 AM
A-341 Alloy
Pear Shaped Links
■
■
■
■
Alloy Steel - Quenched and Tempered
Individually Proof Tested at 2 times Working Load Limit with certification.
Proof Test certification shipped with each link.
Sizes 1/2", 5/8", 3/4", 7/8", 1", 1-1/4" and 1-3/8"
are forged.
Working
Load Limit
Weight
Per
Dimensions
(in.)
in.
A-341
Stock
No.
lbs. *
t
lbs.
B
C
F
1/2
5/8
3/4
7/8
1
†† 1-1/8
1-1/4
1-3/8
†† 1-1/2
†† 1-5/8
†† 1-3/4
†† 1-7/8
†† 2
†† 2-1/4
†† 2-1/2
†† 2-3/4
†† 3
†† 3-1/4
†† 3-1/2
†† 4
1013575
1013584
1013595
1013604
1013613
1013622
1013631
1013640
1013649
1013658
1013667
1013676
1013685
1013694
1013703
1013712
1013721
1013730
1013739
1013748
7,000
9,000
12,300
15,000
24,360
30,600
36,000
43,000
54,300
62,600
84,900
95,800
102,600
143,100
147,300
216,900
228,000
262,200
279,000
373,000
3.15
4.09
5.59
6.81
11
13.9
16.4
19.5
24.7
28.4
38.6
43.5
46.6
65
66.9
98.6
103
119
126
169
.55
1.10
1.76
2.82
4.22
6.25
8.25
11.25
14.25
18.50
22.50
29
34
48
66
88
114
146
181
271
3.00
3.75
4.50
5.25
6.00
6.50
7.75
8.25
9.00
9.75
10.50
11.25
12.00
13.50
15.00
16.50
18.00
19.50
21.00
24.00
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
9.00
10.00
11.00
12.00
13.00
14.00
16.00
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
3.25
3.50
3.75
4.00
4.50
5.00
5.50
6.00
6.50
7.00
8.00
Size
*
††
Based on single leg sling (in-line load), or resultant load on multiple legs with an included angle less than or equal to 120°.
Minimum Ultimate load is 5 times the Working Load Limit.
Welded Link.
G-341 / S-341
Weldless Sling Links
■
■
Forged carbon steel - Quenched and Tempered.
Self Colored or Hot Dip galvanized.
Stock
No.
Size
*
WLL
Single
Pull
Weight
Each
Dimensions
(in.)
in.
G-341
Galv.
S-341
S.C.
lbs. *
lbs.
B
C
F
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-3/8
1013897
1013913
1013931
1013959
1013977
1013995
1014011
1014039
1013904
1013922
1013940
1013968
1013986
1014002
1014020
1014048
1,800
2,900
4,200
6,000
8,300
10,800
16,750
20,500
.23
.55
1.06
1.88
2.75
4.35
7.60
11.30
2.25
3.00
3.75
4.50
5.25
6.00
7.50
8.25
1.50
2.00
2.50
3.00
3.50
4.00
5.00
5.50
.75
1.00
1.25
1.50
1.75
2.00
2.50
2.75
Ultimate Load is 6 times the Working Load Limit. Based on single leg sling (in-line load), or resultant load on multiple legs
with an included angle less than or equal to 120°.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
388
7/3/13 9:40 AM
Overhead
Cranes / Jibs
G-340 / S-340
Weldless End Links
Dimensions
(in.)
in.
G-340
Galv.
S-340
S.C.
lbs. *
lbs.
B
C
D
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-3/8
1014057
1014075
1014093
1014119
1014137
1014155
1014173
1014191
1014217
1014066
1014084
1014100
1014128
1014146
1014164
1014182
1014208
1014226
2,500
3,800
6,500
9,300
14,000
12,000
15,200
26,400
30,000
.15
.22
.49
.97
1.51
2.59
3.95
7.30
10.38
.50
.56
.75
1.00
1.13
2.00
2.25
2.50
2.75
1.75
1.88
2.38
3.25
3.50
5.13
5.75
7.00
7.75
1.18
1.38
1.81
2.32
2.68
3.75
4.25
5.00
5.50
Engineered
Products
Weight
Each
Ultimate Load is 6 times the Working Load Limit. Based on single leg sling (in-line load), or resultant load on multiple legs
with an included angle less than or equal to 120°.
Hardware
*
WLL
Slings
Stock
No.
Size
Services
Forged carbon steel - Quenched and Tempered
Self Colored or Hot Dip galvanized.
Lifting
Products
S-643
Weldless Rings
*
WLL
Single Pull
Weight
Each
in.
S-643
Stock
No.
Dimensions
(in.)
lbs. *
lbs.
B
C
7/8 x 4
7/8 x 5-1/2
1x4
1-1/8 x 4
1-1/4 x 5
1-3/8 x 6
1013780
1013806
1013824
1013842
1013860
1013888
7,200
5,600
10,800
10,400
17,000
19,000
2.72
3.47
3.69
6.60
6.82
10.12
4.00
5.50
4.00
6.00
5.00
6.00
5.75
7.25
6.00
8.25
7.50
8.75
Load
Securement
Size
A
Cordage
Forged carbon steel - Quenched and Tempered.
Self Colored
Contractors
Supply
■
■
Wire
Rope
Weldless Rings meet the performance requirements of
Federal Specification RRC-271F Type VI, except for those
provisions required of the contractor.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
■
■
Hoists
G-340 from 5/8" thru 7/8" meet the performance
requirements of Federal Specification RR-C-271F,
Type XV, except for those provisions required
of the contractor.
389
7/3/13 9:40 AM
A-342 Alloy
Master Links
■
■
■
■
■
■
■
*
**
††
Alloy Steel — Quenched and Tempered.
Individually Proof Tested to values shown, with
certification.
Proof Tested with 60% inside width special fixtures
sized to prevent localized point leading per
ASME A-952.
Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor,
proof load and temperature requirements.
Importantly, these links meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by
ASME B30.26.
Forgings have a Product Identification Code (PIC)
for material traceability, along with the size, the name Crosby and USA in raised lettering.
Selected sizes designated with “W” in the size column have enlarged inside dimensions to allow additional
room for sling hardware and crane hook.
Crosby 1-1/4" to 2" 342/345 master links are type
approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby master links are
100% proof tested, MPI and impact tested. The tests are conducted by Crosby and 3.1 test certification is available upon request.
■
Incorporates patented QUIC-CHECK® deformation
indicators.
Size
Stock
No.
Weight
Each
WLL
Proof
Load
Dimensions
(in.)
in.
A-342
lbs.
lbs. *
lbs. **
A
B
C
Deformation
Indicator
1/2W
5/8
3/4W
7/8W
1W
1-1/4W
1-1/2W
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
†† 4-1/4
†† 4-1/2
†† 4-3/4
†† 5
1014266
1014280
1014285
1014319
1014331
1014348
1014365
1014388
1014404
1014422
1014468
1014440
1014486
1014501
1014529
1015051
1015060
1015067
1015079
1015088
1015094
1.3
1.5
2
3.3
6.1
12
18.6
25.2
37
54.1
68.5
94
115
145
200
198
264
302
345
436
516
7,400
9,000
12,300
15,200
26,000
39,100
61,100
84,900
102,600
143,100
160,000
216,900
228,000
262,200
279,000
336,000
373,000
354,000
360,000
389,000
395,000
17,200
18,000
28,400
35,200
60,000
90,400
141,200
169,800
205,200
289,200
320,000
433,800
456,000
524,400
558,000
672,000
746,000
708,000
720,000
778,000
790,000
.62
.62
.73
.88
1.10
1.33
1.61
1.75
2.00
2.25
2.50
2.75
3.00
3.25
3.50
3.75
4.00
4.25
4.50
4.75
5.00
2.80
3
3.20
3.75
4.30
5.50
5.90
6
7
8
8.38
9.88
9.88
10
12
10
12
12
14
14
15
5
6
6
6.38
7.50
9.50
10.50
12
14
16
16
18
18
20
24
20
24
24
28
28
30
3.50
3.50
4
4.50
5.50
7
7.50
7.50
9
10
11
12.50
13
13.50
15.50
13.50
16
–
–
–
–
Ultimate Load is 5 times the Working Load Limit. Based on single leg sling (in-line load), or resultant load on multiple legs with an
included angle less than or equal to 120 degrees. Applications with wire rope and synthetic sling generally require a design factor of 5.
Proof Test Load equals or exceeds the requirement of ASTM A952(8.1) and ASME B30.9.
Welded Master Link.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
390
7/3/13 9:40 AM
Services
Hoists
Excellent choice for single leg sling of chain,
synthetic or wire rope
Part of Gunnebo Lifting’s SK System of custom
rigging solutions. Can be connected to any
other SK component.
Full traceability for each component
Each of the components has been Proof tested
and certified
Includes Half Link fitting
SKO-7/8-8
SKO-7/8-8
10-87/8-10
SKO-13-8
SKO-16-8
SKO-18/20-8
mm
7
8
10
13
16
20
Working
Load Limit *
at 90°
80
80
80
80
80
80
3,500
4,500
7,100
12,000
18,100
28,300
Weight
Each
Dimension (Inches)
L
3.9
3.9
5
5.7
6.9
8
L1
5
5
6.3
7.4
8.9
10.5
B
2
2
2.6
2.8
3.2
4.1
G
.55
.55
.71
.87
1
1.2
B1
.59
.59
.79
1
1.2
1.4
lbs.
.88
.88
1.3
2.2
3.5
5.7
Design Factor 5:1 proof tested and certified
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
Load
Securement
Cordage
Wire
Rope
Lifting
Products
*
in
9/32
5/16
3/8
1/2
5/8
3/4
Grade
Hardware
Chain Size
Model
No.
Slings
Engineered
Products
■
■
■
■
■
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Overhead
Cranes / Jibs
WARNING
Open Pear Master Links
SK System (SKO)
391
7/3/13 9:40 AM
WARNING
Wide Master Links
■
■
■
■
■
■
■
■
ON PAGES 454 - 461.
Alloy Steel • Quenched & Tempered
Individual Proof Test Certification* with each link
60% inside width special fixtures sized to
prevent localized point loading per ASTM A-952
All links marked with material heat code for
traceability, size, SKOOKUM and USA
Links 1-1/2" and smaller are drop forged
Links 1-3/4" and larger are robotically welded
Ultimate Load is 5 times the Working Load Limit
Made in USA
Skookum Master Links are available in any diameter
and any size. Please contact your Lifting Specialist for
any custom product or non-standard sizes.
Size
*
in.
mm
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
8-1/2
13
16
19
26
32
38
44
51
57
63
70
76
89
102
114
127
140
152
165
178
191
203
216
Stock
No.
AMF0500
AMF0625
AMF0750
AMF1000
AMF1250
AMF1500
AMW1750
AMW2000
AMW2250
AMW2500
AMW2750
AMW3000
AMW3500
AMW4000
AMW4500
AMW5000
AMW5500
AMW6000
AMW6500
AMW7000
AMW7500
AMW8000
AMW8500
Weight
Each
lbs.
Working Load
Limit (lbs.)
@ 5:1
Design Factor
Working Load
Limit (lbs.)
@ 4:1
Design Factor
.8
1.5
2.1
4.9
9.6
16.2
25.2
37
54.1
67.8
87.7
115
200
228
345
516
675
875
1114
1390
1711
2075
2491
7,000
9,000
12,300
24,360
39,100
54,300
84,900
102,600
143,100
160,000
216,900
228,000
279,000
373,000
360,000
395,000
495,900
606,100
771,400
826,500
969,760
1,102,000
1,322,400
8,750
11,250
15,375
30,450
48,875
67,875
106,125
128,250
178,785
200,000
271,125
285,000
348,750
466,250
450,000
493,750
619,875
757,625
964,250
1,033,125
1,212,200
1,377,500
1,653,000
Dimensions (in)
A
B
C
.5
.63
.75
1
1.25
1.5
1.75
2
2.25
2.5
2.75
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
2.5
3
2.75
3.5
4.38
5.25
6
7
8
8
9.5
9
12
10
14
15
16
18
20
21
22
24
25
5
6
5.5
7
8.75
10.5
12
14
16
16
16
18
24
20
28
30
32
36
40
42
44
48
50
Painted
Finish
Forged /
Welded
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Forged
Forged
Forged
Forged
Forged
Forged
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Sizes 3-1/2" and above are proof tested at customer request only, a certificate of conformance is still provided.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
392
7/3/13 9:41 AM
We provide an endless possibility for special
products and assemblies with:
C
A
Services
Oblong
Link
Custom Shapes
Special Marking
OEM Private Labeling
Custom Engineering
Product Development
Certifications
Alloy, Carbon Steel, Stainless Steel
Engineered
Products
Master
Link
____________________________
SO # = ____________________________
DWG # = ____________________________
Name: ____________________________
Phone: ____________________________
D
Link
Hardware
Customer = Slings
CUSTOMER INFORMATION:
DIMENSIONS:
____________________________
C = ____________________________
D = ____________________________
Capacity = ____________________________
Quantity = ____________________________
Materials: ____________________________
Triangle
Link
Pear
Link
Application: ____________________________
NOTES:
____________________________
____________________________
____________________________
____________________________
Other
Contractors
Supply
____________________________
Cordage
Testing
Requirements:____________________________
Finish
Requirements: Lifting
Products
B = Wire
Rope
____________________________
Load
Securement
A = J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
■
■
■
■
■
■
■
B
Overhead
Cranes / Jibs
ON PAGES 454 - 461.
Hoists
WARNING
Design-A-Link
393
7/3/13 9:41 AM
G-411 Standard
Wire Rope Thimbles
G-411 meets the performance requirements of
Federal Specification FF-T-276b Type II, except for
those provisions required of the contractor.
■
■
Hot Dip galvanized steel.
The standard choice for light duty applications
and loading conditions.
Rope Diameter
in.
mm
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8 - 1-1/4
3-4
5
6-7
8
9-10
11-13
16
18-20
22
24-26
28-32
Stock No.
G-411
1037256
1037274
1037292
1037318
1037336
1037354
1037372
1037390
1037416
1037434
1037452
Weight Per 100
lbs.
3.5
3.5
3.5
4
6.7
12.5
34.5
47.1
84.6
97.5
175
A
1.94
1.94
1.94
2.13
2.38
2.75
3.5
3.75
5
5.69
6.25
0.69
0.69
0.69
0.81
0.94
1.13
1.38
1.63
1.88
2.5
2.75
0.25
0.31
0.38
0.44
0.53
0.69
0.91
1.08
1.27
1.39
1.75
F
0.16
0.22
0.28
0.34
0.41
0.53
0.66
0.78
0.94
1.06
1.31
G
0.05
0.05
0.05
0.05
0.06
0.08
0.13
0.14
0.16
0.16
0.22
H
0.13
0.13
0.13
0.13
0.16
0.19
0.34
0.34
0.44
0.41
0.5
■
■
Available in Hot Dip galvanized or Stainless Steel
(Type 304).
Rope Diameter
in.
mm
*1/4
* 5/16
* 3/8
7/16
* 1/2 - 9/16
* 5/8
* 3/4
7/8
1
1-1/8 - 1-1/4
1-1/4 - 1-3/8
1-3/8 - 1-1/2
1-5/8
1-3/4
1-7/8 - 2
2-1/4
*
1.06
1.06
1.06
1.25
1.47
1.75
2.38
2.69
3.19
3.75
4.31
Dimensions (in.)
D
E
Stainless steel recommended for more corrosive
environments where greater protection is required.
Greater protection against wear and deformation
of the wire rope eye.
Longer service life.
G-414 meets the performance requirements of
Federal Specification FF-T-276b Type III, except for
those provisions required of the contractor.
C
1.31
1.31
1.31
1.5
1.63
1.88
2.25
2.5
3.5
4.25
4.5
■
G-414 Extra Heavy
Wire Rope Thimbles
■
B
6-7
8
9-10
11-12
13-15
16
18-20
22
24-26
28-32
32-35
35-38
40
44
48-52
56
Stock No.
G-414 SS-414
1037639
1037657
1037675
1037693
1037719
1037755
1037773
1037791
1037817
1037835
1037853
1037871
1037899
1037915
1037933
1037951
1037960
1037988
1038004
–
1038022
1038040
1038068
–
–
–
–
–
–
–
–
–
Weight Per 100
lbs.
6.5
11.8
21.6
34.7
51
75.7
158.1
177.8
313.9
400
886
1294.8
1700
1775
2775
3950
A
2.19
2.5
2.88
3.25
3.62
4.25
5
5.5
6.12
7
9.08
9
11.25
12.19
15.12
17.5
B
1.62
1.88
2.12
2.38
2.75
3.25
3.75
4.25
4.5
5.12
6.5
6.25
8
9
12
14
C
1.5
1.81
2.12
2.38
2.75
3.12
3.81
4.25
4.75
5.88
6.81
7.12
8.12
8.5
10.38
11.88
Dimensions (in.)
D
E
F
0.88
1.06
1.12
1.25
1.5
1.75
2
2.25
2.5
2.88
3.5
3.5
4
4.5
6
7
0.41
0.5
0.63
0.72
0.89
1
1.22
1.38
1.56
1.88
2.25
2.62
3
3.06
3.38
3.88
0.28
0.34
0.41
0.47
0.59
0.66
0.78
0.94
1.06
1.31
1.44
1.56
1.72
1.84
2.09
2.38
G
0.06
0.08
0.11
0.12
0.15
0.16
0.22
0.22
0.25
0.25
0.37
0.5
0.5
0.5
0.5
0.62
H
0.25
0.3
0.39
0.45
0.48
0.53
0.69
0.78
0.88
1.25
1.29
1.31
1.38
1.5
1.69
1.82
SS-414 sizes available in stainless steel type 304
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
394
7/3/13 9:41 AM
1037531
1037559
1037577
1037595
1037611
A
3
3.8
7
12.5
25
Dimensions
(in.)
C
D
B
0.28
0.34
0.44
0.53
0.66
0.69
0.81
0.94
1.12
1.38
1.06
1.25
1.47
1.75
2.38
E
1.41
1.53
1.72
1.47
2.34
F
2.03
2.16
2.47
2.84
3.59
0.38
0.5
0.62
0.75
1
Slings
6-7
8
9-10
11-13
16
Weight
Per 100
lbs.
Cast Ductile Iron.
Fits pin for open wire rope socket, boom pendant
clevis and wedge socket.
Rope
Diameter
in.
mm
13
16
18-20
22
24-26
28-30
32-35
1037121
1037149
1037167
1037185
1037201
1037229
1037247
Weight
Per 100
lbs.
0.61
2.21
2.32
5.45
5.25
9.29
9.81
A
2.81
4.69
4.69
6.06
6.06
7.25
7.25
B
1.75
3
3
3.81
3.81
4.56
4.56
C
0.25
0.38
0.38
0.5
0.5
0.63
0.63
D
1.06
1.31
1.5
1.75
2.13
2.38
2.63
Dimensions
(in.)
E
F
G
0.75
1.06
1.06
1.38
1.38
1.75
1.94
0.56
0.81
0.81
1.06
1.06
1.31
1.53
0.28
0.41
0.41
0.53
0.53
0.66
0.78
H
0.88
1.13
1.38
1.63
1.81
2.06
2.31
J
2.13
3.38
3.38
4.5
4.5
5.38
5.38
K
1.63
2.25
2.25
3.25
3.25
3.88
3.88
L
1.56
2.56
2.56
3.44
3.44
4.06
4.13
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
Load
Securement
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4 - 1-3/8
Stock
No.
G-412
Lifting
Products
■
■
Hardware
G-412 Solid
Wire Rope Thimbles
Wire
Rope
1/4
5/16
3/8
1/2
5/8
Stock
No.
G-408
Cordage
Rope
Diameter
in.
mm
Engineered
Products
Services
Hot Dip galvanized Steel.
Recommended for light duty applications in
which it is being assembled into another fitting
(i.e., shackle or master link).
Hoists
■
■
Overhead
Cranes / Jibs
G-408 Open Pattern
Wire Rope Thimbles
395
7/3/13 9:41 AM
Special Thimbles
Slip-Thru Thimbles are designed to allow passage
of an identical thimble through its eye. This is a necessity
when a regular sling is used as a choker sling. Slip-Thru
Thimbles also prevent the eye of the sling from mashing
together and the top of the eye wearing excessively.
The generous inside dimensions allow the thimbles to
fit large crane hooks. Rope retention ears are tapered so
they can be bent or peened over wire rope.
Thimble
Number
W-2
W-3
W-4
W-5
W-6
W-7
W-8
W-9
W-10
W-11
Single
5/16-3/8
1/2-9/16
5/8-3/4
7/8-1
1-1/8 to 1-1/4
1-3/8 to 1-1/2
1-5/8 to 1-3/4
1-7/8 to 2
2-1/8 to 2-1/4
2-1/2 to 3
Sling Size (in.)
8 Parts
6 Parts
3/32-1/8
3/16
1/4
5/16
3/8
7/16-1/2
9/16
5/8
3/4
7/8-1
A
3/32-1/8
3/16
1/4-5/16
3/8
7/16
1/2
5/8
3/4
7/8-1
1-1/8
Dimensions (in.)
C
D
E
B
2-1/8
2-3/8
3-3/8
3-3/4
4-3/8
5
6-3/4
8
8
9
4-1/8
4-3/8
6-5/8
7-1/8
8-3/8
9-1/2
11-3/4
14-1/2
15-1/2
18-1/2
7/16
5/8
13/16
1-1/8
1-3/8
1-5/8
1-13/16
2-1/8
2-1/2
3-3/16
13/16
1
1-5/16
1-5/8
1-7/8
2-1/8
2-9/16
3-1/4
3-3/4
4-11/16
9/16
5/8
5/8
7/8
1
1-1/4
1-7/16
1-7/8
2
2-1/2
F
3-1/4
4
5-3/8
6-1/4
7-1/8
8-1/8
9-3/8
13
13
15-3/4
G
Weight
(lbs.)
H
Weight
(lbs.)
5-1/4
6
8-1/2
9-3/8
11
12-1/2
14-3/4
19-1/4
20-3/8
24-3/4
1.3
1.5
3.4
5.6
8.6
10
17.6
53
70
126
Crescent Thimbles are designed to protect the
bearing surface of a loop where a large dimension loop
is necessary. The ears are tapered so that they can be
bent or peened over wire rope. Standard-Laid Rope Size
3/8" to 3".
Thimble
Number
6C
8C
9C
10C
14C
16C
18C
20C
22C
24C
28C
23C
40C
48C
Single
Sling Size (in.)
8 Parts
6 Parts
3/8-7/16
1/2-9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8 to 1-1/2
1-5/8
1-3/4 to 1-7/8
2
2-1/4 to 2-1/2
2-3/4 to 3
3/32-1/8
3/16
–
1/4
–
5/16
3/8
7/16
1/2
9/16
–
5/8
3/4-7/8
1
1/8
3/16
1/4
5/16
–
3/8
7/16
1/2
9/16
5/8
–
3/4
1
1-1/8
A
2
2-1/4
2-3/4
3-1/4
4-1/2
4-1/2
4-7/8
5-1/2
6
6-1/2
7
7
8-1/2
10
B
1
1-1/8
1-3/8
1-5/8
2-1/4
2-1/4
2-7/16
2-3/4
3
3-1/4
3-1/2
3-1/2
4-1/4
5
C
27/32
1
1-5/32
1-5/16
1-7/16
1-9/16
1-13/16
2-1/16
2-1/4
2-1/2
2-15/16
3-3/16
4-1/8
4-7/8
Dimensions (in.)
D
E
15/32
5/8
23/32
13/16
15/16
1-1/16
1-1/4
1-7/16
1-5/8
1-3/4
1-15/16
2-3/16
2-7/8
3-3/8
2-1/16
2-1/2
3
3-1/2
4-5/16
4-19/32
5-1/32
5-3/4
6-1/4
6-11/16
7-3/8
7-13/16
9-5/8
11-1/4
F
3/8
1/2
19/32
5/8
3/4
13/16
7/8
15/16
1-1/16
1-1/8
1-1/4
1-1/2
1-5/8
1-3/4
G
1/2
1/2
9/16
5/8
11/16
3/4
7/8
15/16
1-1/8
1-1/4
1-3/8
1-1/2
1-7/8
2-1/4
3/8
1/2
19/32
5/8
3/4
7/8
1
1-1/8
1-3/16
1-1/4
1-1/2
1-5/8
2
2-1/2
.50
.75
1.2
2
3.3
3.75
5
6.75
8
12
16.6
21.80
39
67
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
396
7/3/13 9:41 AM
Overhead
Cranes / Jibs
Special Thimbles
(Continued)
82
83
84
85
86
87
Sling Size (in.)
Single
8 Parts
1/8
1/4
5/16
3/8
7/16
1/2
1/8
3/16
1/4
5/16
3/8
7/16
Fits Choker
Hook
A
#2
#3
#4
#5
#6
#7
1/2
5/8
13/16
15/16
1-1/8
1-3/8
B
C
7/8
1
1-5/16
1-7/16
1-11/16
1-15/16
1-1/4
1-1/2
1-3/4
2
2-1/4
2-3/4
Dimensions (in.)
D
E
2-1/8
2-1/2
2-7/8
3-1/4
3-5/8
4-1/16
3-1/4
3-7/8
4-7/16
5
5-3/4
6-3/8
F
1/4
1/4
5/16
5/16
3/8
3/8
G
H
3/8
1/2
5/8
3/4
7/8
1
5/16
3/8
7/16
1/2
9/16
11/16
Weight
(lbs.)
.7
1.1
1.8
2.2
3.3
4.7
A
B
C
D
E
F
Weight
(lbs.)
3/8-7/16
1/2-9/16
5/8-3/4
7/8-1
1-1/8 to 1-1/4
1-3/8 to 1-1/2
1-5/8 to 1-3/4
1-7/8 to 2
4-1/2
6
7
7-1/8
10
11
15
15
3
4
4-1/2
5
6-1/2
7-1/2
9
9
6-7/16
8-1/2
9-15/16
10-3/4
14-3/8
15-7/8
20-13/16
21-5/8
4-5/8
6-3/16
7
8-3/4
10-7/8
11-3/4
14-1/4
14-7/8
7/8
1-1/8
1-7/16
1-13/16
2-3/16
2-9/16
2-15/16
3-5/16
1/2
5/8
15/16
1-3/16
1-7/16
1-11/16
1-15/16
2-3/16
3
6.3
11
15.6
30
39
71
85
* DG6E
* DG8E
* DG10E
5/8-3/4
7/8-1
1-1/8 to 1-1/4
8-1/4
9
11-1/4
5-1/2
6
7-1/4
11-1/4
12-3/4
15-7/8
8
8-1/2
12-1/8
2-3/8
2-7/8
3-9/16
1-3/4
2-1/4
2-5/8
21
28
50
Contractors
Supply
3E
4E
6E
8E
10E
12E
14E
16E
Cordage
Dimensions (in.)
Load
Securement
Size Rope
Diameter
(in.)
*Note: DG—designates double groove equalizing thimble.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Thimble
Number
Wire
Rope
Lifting
Products
Hardware
Equalizing Thimble—Single and double groove.
Provides for the adjustment of the length of the legs of bridle
slings so as to lift unbalanced loads evenly. Makes all bridle
slings more versatile while eliminating center ring and two
splices. Material: Cast electric steel.
Slings
Thimble
Number
Engineered
Products
Services
Hoists
The No. 83 Casing Thimble has been designed
for the oil industry. The Choker Thimbles, No. 82, No. 84,
No. 85, No. 86 and No. 87 are designed especially
for braided choker slings. The ears can be peened over
to retain wire rope.
397
7/3/13 9:41 AM
Boom Pendant Thimbles
Illustrated below is a NEWCO Boom Pendant fabricated
with a flemish eye splice and swaged steel sleeves which
fit around a pendant fitting that is either open or closed.
Available In sizes from 9/16" to 2-3/8". Pendants are not
to be used for any other purpose other than Boom Pendant application. NEWCO Pendant Thimbles are interchangeable
with standard sockets. Weight on open pendant includes
pin (D) and cotter.
Wire Rope
Diameter
(in.)
A
B
C
D
E
F
G
Est.
Weight
(lbs.)
9/16 to 5/8
3/4
7/8
1
1-1/8
1-1/4 to 1-3/8
1-1/2
1-5/8
1-3/4 to 1-7/8
2 to 2-1/8
2-1/4 to 2-3/8
4-3/2
4-27/32
5-5/16
5-31/32
6-3/8
7-3/8
8-3/16
10-7/16
12-5/16
13
17-5/16
3-1/8
3-5/8
4-1/8
4-9/16
5-1/16
6-1/8
6-3/4
8
9-3/4
10-1/2
11-3/4
1-1/4
1-7/16
1-11/16
2-1/16
2-5/16
2-9/16
2-13/16
3-1/16
3-9/16
3-13/16
4-3/8
1-1/16
1-5/16
1-1/2
1-3/4
2
2-1/4
2-1/2
2-5/8
3-1/8
3-7/16
3-7/8
1-1/16
1-3/16
1-3/8
1-5/8
1-3/4
2-1/8
2-3/8
2-1/2
3
3-1/4
3-5/8
11/16
13/16
15/16
1-1/8
1-1/4
1-1/2
1-5/8
1-3/4
2
2-1/4
2-1/2
2-1/8
2-1/2
2-3/4
3
3-1/4
4
4-1/2
5-1/2
7
7-1/2
8-1/2
1.7
2.6
3.5
4.6
5.6
9.6
14
29
41
57
76
Closed Dimensions & Data (in.)
Wire Rope
Diameter
(in.)
A
B
C
D
E
F
G
H
J
L
P
R
Est.
Weight
(lbs.)
9/16 to 5/8
3/4
7/8
1
1-1/8
1-1/4 to 1-3/8
1-1/2
1-5/8
1-3/4 to 1-7/8
2 to 2-1/8
8-3/64
9-3/32
10-5/16
11-11/16
12-25/32
15-1/32
17-1/8
20-1/2
24-1/16
27
2-3/8
2-13/16
3-1/4
3-3/4
4-1/4
4-3/4
5-3/8
5-5/8
6-5/8
7-5/8
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
3
3-1/2
4
1-3/16
1-3/8
1-5/8
2
2-1/4
2-1/2
2-3/4
3
3-1/2
3-3/4
15/32
17/32
5/8
3/4
7/8
15/16
1-1/16
1-3/16
1-5/16
1-11/16
11/16
13/16
15/16
1-1/18
1-1/4
1-1/2
1-5/8
1-3/4
2
2-1/4
2-1/8
2-1/2
2-3/4
3
3-1/4
4
4-1/2
5-1/2
7
8
3-1/8
3-5/8
4-1/8
4-9/16
5-1/16
6-1/8
6-3/4
8
9-3/4
10-3/4
2-17/32
3-1/32
3-1/4
3-11/16
3-27/32
4-5/16
4-13/16
6-7/16
7-7/16
9-3/4
4-1/4
4-3/4
5-1/4
5-7/8
6-17/32
8
9-1/8
10-5/8
12-3/4
13-1/4
2-9/32
2-3/4
3-1/4
3-7/8
4-7/16
4-15/16
5-5/8
6-1/8
6-7/8
7-1/8
9/16
21/32
3/4
7/8
1
1-1/8
1-3/16
1-5/16
1-9/16
1-13/16
5.3
7.5
12.5
19
26
39
56
78
125
166
Open Dimensions & Data (in.)
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
398
7/3/13 9:41 AM
Overhead
Cranes / Jibs
Special Thimbles—
Stainless Steel
C
.48
.62
.72
.73
.78
.95
1.40
1.70
1.85
2.05
2.37
2.63
3.10
3.36
D
.03
.03
.03
.04
.04
.05
.06
.06
.06
.06
.07
.08
.09
.09
.30/100
.40/100
.50/100
.74/100
.01
.02
.04
.06
.08
.10
.17
.21
.39
.49
Slings
B
.28
.31
.38
.43
.55
.69
.78
.94
1.20
1.36
1.45
1.60
1.90
2.08
Hardware
A
.10
.09
.12
.14
.20
.25
.34
.42
.54
.60
.68
.76
.95
1.05
Weight
(lbs.)
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
Load
Securement
Cordage
Wire
Rope
1/16
1/16 - 5/64
3/32 - 1/8
5/32
3/16
1/4
5/16
3/8
1/2
9/16
5/8
3/4
7/8
1
Dimensions (in.)
Lifting
Products
Wire
Rope Size
(in.)
Engineered
Products
Services
Hoists
Stainless Steel
Wire Rope Thimbles—
Type 304
399
7/3/13 9:41 AM
WARNING
S-326A / S-3326
SHUR-LOC® Swivel Hooks
■
■
■
■
■
■
■
■
■
■
■
■
■
Forged Alloy Steel — Quenched and Tempered.
Individually Proof Tested at 2-1/2 times the
4:1 Working Load Limit with certification.
Recessed trigger design is flush with the hook body,
protecting the trigger from potential damage.
Easy to operate with enlarged thumb access.
Positive Lock Latch is Self-Locking when hook is loaded.
Rated for both Wire Rope and use with Grade 80/100 Chain.
G-414 Heavy Thimble should be used with wire rope slings.
Trigger repair Kit available (S-4316). Consists of spring,
roll pin and trigger.
S-3326 Swivel Hook utilizes anti-friction bearing design,
which allows hook to rotate freely under load.
Fatigue rated.
The SHUR-LOC® hook, if properly installed and locked,
can be used for personnel lifting applications and meets the
intent of OSHA Rule 1926.1431(g)(1)(i)(A) and
1926.1501(g)(4)(iv)(B).
"Look for the Platinum Color – Crosby Grade 100 Alloy Products".
U.S. Patent 5,381,650 and foreign equivalents.
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
S-326A
Swivel Hook
S-3326
Swivel Hook
w/ Bearing
Use in corrosive environment requires shank and nut inspection
in accordance with ASME B 30.10-1.10.4 (b)(5)(c) 2009.
S-326A SHUR-LOC® Swivel Hooks—Suitable for infrequent, non-continuous rotation under load.
Chain
Size
in.
mm
Grade 100
Alloy Chain
Working
Load Limit
(lbs.) 4:1
–
1/4-5/16
3/8
1/2
5/8
3/4
7/8
6
7-8
10
13
16
18-20
22
3,200
5,700
8,800
15,000
22,600
35,300
44,100
Wire Rope
XXIP IWRC
Mechanical
Splice
Stock
No.
Weight
Each
Dimensions
(in.)
Size
(in.)
WLL
(lbs.)
5:1 *
S1326
lbs.
A
B
C
D
E
F
H
J
L
AA
5/16
7/16
1/2
5/8
7/8
1
1-1/8
2,200
4,200
5,600
8,600
16,600
22,000
26,500
1004304
1004313
1004322
1004331
1004340
1004349
1004358
1.26
2.62
4.70
8.64
17.00
24.00
29.00
1.50
1.75
2.00
2.50
2.75
2.83
3.44
1.32
1.59
1.73
2.38
2.53
2.52
3.19
6.13
7.60
8.83
11.20
12.90
14.10
16.40
.79
1.10
1.17
1.67
2.05
2.22
2.45
2.60
3.50
4.39
5.45
6.56
7.76
8.75
.67
.87
1.10
1.26
1.50
2.01
2.26
.50
.63
.75
1.00
1.13
1.10
1.30
.63
.81
.94
1.16
1.50
2.03
2.20
1.13
1.38
1.75
2.11
2.49
3.52
3.83
1.50
2.00
2.50
3.00
3.50
5.00
6.00
S-3326 SHUR-LOC® Swivel Hooks with Bearing—Suitable for frequent rotation under load.
Chain
Size
in.
mm
Grade 100
Alloy Chain
Working
Load Limit
(lbs.) 4:1
–
1/4-5/16
3/8
1/2
5/8
6
7-8
10
13
16
3,200
5,700
8,800
15,000
22,600
*
Wire Rope
XXIP IWRC
Mechanical
Splice
Stock
No.
Weight
Each
Dimensions
(in.)
Size
(in.)
WLL
(lbs.)
5:1 *
S13326
lbs.
A
5/16
7/16
1/2
5/8
7/8
2,200
4,200
5,600
8,600
16,600
1004404
1004413
1004422
1004431
1004440
1.50
3.10
5.26
11.22
17.32
1.50
1.75
2.00
2.50
2.75
B
C
D
1.14 6.17 .79
1.52 7.54 1.10
1.61 8.88 1.17
2.03 11.11 1.67
1.98 12.90 2.05
E
F
H
J
L
AA
2.60
3.50
4.39
5.45
6.56
.67
.87
1.10
1.26
1.50
.50
.63
.75
1.00
1.13
.63
.81
.94
1.16
1.50
1.13
1.44
1.83
2.19
2.61
1.50
2.00
2.50
3.00
3.50
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
400
7/3/13 9:41 AM
*
†
1
1-1/2
2
3
5
7
11
15
22
30
37
45
60
†D
†F
†G
†H
†I
†J
†K
†L
†N
O
P
S
T
■
■
■
■
Eye Hook
Stock No.
Carbon
S-320C
S-320CN
S.C.
1022200
1022211
1022222
1022233
1022244
1022255
1022264
1022277
1022288
1023289
1023305
1023323
1023341
Carbon
G-320CN
Galv.
Alloy
S-320A
S-320AN
S.C.
1022208
1022219
1022230
1022241
1022249
1022262
1022274
1022285
1022296
–
–
–
–
1022375
1022386
1022397
1022406
1022419
1022430
1022441
1022452
1022465
1023546
1023564
1023582
1023608
Weight
Each
(lbs.)
Engineered
Products
Slings
Hardware
■
■
■
Metric Rated at
5:1 Design Factor for
(Carbon Steel); 4:1 Design Factor for
(Alloy Steel).
Can be proof tested to 2 times the working Load Limit.
Low profile hook tip.
New integrated latch (S-4320) meets the World class standard for lifting.
Heavy-duty stamped latch interlocks with the hook tip.
High cycle, long life spring.
When secured with proper cotter pin through the hole in the tip of hook, meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) for personnel hoisting.
Fatigue rated at 1-1/2 times the Working Load Limit
at 20,000 cycles.
Replacement
Latch Kits
S-4320
PL
SS-4055
Stock No. Stock No. Stock No.
.61
.89
1.44
2.07
4.30
8.30
15.00
20.77
39.50
60
105
148
228
1096325
1096374
1096421
1096468
1096515
1096562
1096609
1096657
1096704
–
–
–
–
–
–
–
–
1092000
1092001
1092002
1092003
1092004
1093716
1093717
1093718
1093719
–
–
–
–
–
–
–
–
–
1090161
1090189
1090189
1090205
Eye Hooks (3/4 TC - 22TA), Proof load is 2 times Working Load Limit. Eye Hooks (20 TC - 60TA). All carbon hooks-average straightening
load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 1 ton through 22 ton-average straightening load (ultimate load) is 5 times
Working Load Limit. Alloy eye hooks 30 tons through 60 tons-average straightening load (ultimate load) is 4.5 times Working Load Limit.
New 320N style hook.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Wire
Rope
3/4
1
1-1/2
2
3
5
7-1/2
10
15
20
25
30
40
Cordage
Alloy
■
Load
Securement
Carbon
Hook
ID
Code
Sizes 3/4 metric ton Carbon
through 22 metric ton Alloy
Contractors
Supply
Working Load Limit
(t) *
Services
The following additional features have
been incorporated in the new Crosby
S-320N Eye Hoist Hooks.
Fall
Protection
The most complete line
of Eye hoist hooks.
■
Available in carbon steel
and alloy steel.
■
Designed with a
(Carbon Steel);
(Alloy Steel).
■
Eye hooks are load rated.
■
Proper design, careful forging and precision controlled quenched and tempering give maximum strength
without excessive weight and bulk.
■
Every Crosby Eye Hook has a pre-drilled cam, which
can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added.
■
Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.
■
Type Approval and certification in accordance
with ABS 2006 Steel Vessel Rules 1-1-17.7, and
ABS Guide for Certification of Cranes.
■
Hoist hooks incorporate two types of strategically
placed markings forged into the product,
which address two (2) QUIC-CHECK® features:
-Deformation Indicators and Angle Indicators.
■
Overhead
Cranes / Jibs
All Crosby 320 Eye Hoist Hooks
incorporate the following features:
Hoists
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Lifting
Products
WARNING
S-320 / S-320N Eye Hooks
401
7/3/13 9:41 AM
WARNING
S-322CN / S-322AN
Swivel Hooks
■ Forged — Quenched and Tempered.
■ Swivel hooks are load rated.
■ Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
■ Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit. Simply purchase the latch assemblies. Even years after purchase of the original hook,
latch assemblies can be added.
■ Hoist hooks incorporate markings forged into the
product which address two (2) QUIC-CHECK® features:
- Deformation Indicators—Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a
QUIC-CHECK® measurement to determine if
the throat opening has changed, thus indicating abuse or overload.
- Angle Indicators—Indicate the maximum included angle which is allowed between two (2) sling legs
in the hook. These indicators also provide the
opportunity to approximate other included angles
between two sling legs.
Working
Load Limit
(t) *
Carbon
Alloy
S-322
CN
Stock
No.
3/4
1
1-1/2
2
3
5
7-1/2
10
15
–
1
1-1/2
2
3
5
7
11
15
22
30
1048600
1048609
1048618
1048627
1048636
1048645
1048654
1048663
1048672
–
1048804
1048813
1048822
1048831
1048837
1048854
1048865
1048877
1048886
1025688
.75
1.25
2.25
2.30
4.96
10.29
19.40
23.25
47
70.50
L-322
AN
Stock
No.
Weight
Each
(lbs.)
1048807
1048816
1048825
1048834
1048840
1048859
1048868
1048880
1048889
–
.75
1.25
2.25
2.30
4.96
10.29
19.40
23.25
47
70.50
Working
Load Limit
(t) *
Carbon
Alloy
L-322
CN
Stock
No.
3/4
1
1-1/2
2
3
5
7-1/2
10
15
–
1
1-1/2
2
3
5
7
11
15
22
30
1048603
104862
1048621
1048630
1048639
1048648
1048657
1048666
1048675
–
S-322
AN
Stock
No.
Weight
Each
(lbs.)
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
■ Type Approval and certification in accordance with
ABS 2006 Steel Vessel Rules 1-1-17.7, and
■ U.S. Patents 5,381,650 & 5,193,480 & 5,103,755
and foreign equivalents.
This hook is a positioning device and is not intended to
rotate under load. Use in corrosive environment requires
shank and nut inspection in accordance with ASME
B30.10-1.10.4 (b)(5)(c) 2009.
A
B
C
D
F
G
H
J
K
L
M
O†
R
S
AA
Rep.
Latch
Stock
No.
2.00
2.50
3.00
3.00
3.50
4.56
5.00
5.62
7.10
7.10
.82
1.31
1.50
1.50
1.64
2.29
2.53
2.48
3.76
3.76
1.25
1.50
1.75
1.75
2.00
2.50
2.75
3.12
4.10
4.10
2.86
3.15
3.59
4.00
4.84
6.28
7.54
8.34
10.34
13.62
1.25
1.38
1.50
1.62
2.00
2.50
3.00
3.25
4.25
5.00
.73
.84
1.00
1.13
1.44
1.81
2.25
2.59
3.00
3.61
.81
.94
1.16
1.31
1.63
2.06
2.63
2.94
3.50
4.63
.93
.97
1.06
1.19
1.50
1.78
2.41
2.62
3.41
4.00
.63
.71
.88
.94
1.31
1.66
1.88
2.16
2.69
3.00
5.66
6.71
7.75
8.25
9.69
12.47
14.75
16.40
21.34
23.25
.63
.71
.88
.94
1.13
1.44
1.63
1.94
2.38
3.00
.89
.91
1.00
1.09
1.36
1.61
2.08
2.27
3.02
3.25
4.55
5.37
6.12
6.50
7.50
9.63
11.37
12.25
16.71
18.01
38
.50
.63
.63
.75
1.00
1.13
1.25
1.50
1.50
1.50
2.00
2.00
2.00
2.50
3.00
4.00
4.00
5.00
6.50
1096325
1096374
1096421
1096468
1096515
1096562
1096609
1096657
1096704
1093716
Dimensions
(in.)
A
B
C
D
F
G
H
J
K
L
M
O†
R
S
AA
Rep.
Latch
Stock
No.
2.00
2.50
3.00
3.00
3.50
4.56
5.00
5.62
7.10
7.10
.82
1.31
1.50
1.50
1.64
2.29
2.53
2.48
3.76
3.76
1.25
1.50
1.75
1.75
2.00
2.50
2.75
3.12
4.10
4.10
2.86
3.15
3.59
4.00
4.84
6.28
7.54
8.34
10.34
13.62
1.25
1.38
1.50
1.62
2.00
2.50
3.00
3.25
4.25
5.00
.73
.84
1.00
1.13
1.44
1.81
2.25
2.59
3.00
3.61
.81
.94
1.16
1.31
1.63
2.06
2.63
2.94
3.50
4.63
.93
.97
1.06
1.19
1.50
1.78
2.41
2.62
3.41
4.00
.63
.71
.88
.94
1.31
1.66
1.88
2.16
2.69
3.00
5.66
6.71
7.75
8.25
9.69
12.47
14.75
16.40
21.34
23.25
.63
.71
.88
.94
1.13
1.44
1.63
1.94
2.38
3.00
.89
.91
1.00
1.09
1.36
1.61
2.08
2.27
3.02
3.25
4.55
5.37
6.12
6.50
7.50
9.63
11.37
12.25
16.71
18.01
38
.50
.63
.63
.75
1.00
1.13
1.25
1.50
1.50
1.50
2.00
2.00
2.00
2.50
3.00
4.00
4.00
5.00
6.50
1096325
1096374
1096421
1096468
1096515
1096562
1096609
1096657
1096704
1093716
Dimensions
(in.)
*
Note: Carbon swivel hooks .75tC-15tC: proof load is 2 times working load limit. Designed with a 5 to 1 design factor.
Alloy swivel hooks 1tA-22A: proof load is 2.5 times working load limit. Designed with a 4.5 to 1 design factor.
Alloy swivel hook 30tA: proof load is 2 times working load limit. Designed with a 4 to 1 design factor.
†
Dimensions for hooks 3/4 ton carbon thru 22t alloy are for S-4320 latch kits. Dimensions for hooks 31.5t alloy are for PL latch kit.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
402
7/3/13 9:41 AM
Overhead
Cranes / Jibs
G-401 Chain Swivels /
G-402 Regular Swivels
Hoists
G-401 Chain Swivels meet the performance requirements
of Federal Specification RR-C-271F, Type VII, Class 1,
except for those provisions required of the contractor.
G-401 Chain Swivel
Size
in.
1/4
5/16
3/8
1/2
5/8
3/4
Stock
No.
G-401
1016233
1016251
1016279
1016297
1016313
1016331
Working
Load
Limit
lbs. *
Weight
Each
lbs.
850
1,250
2,250
3,600
5,200
7,200
.13
.25
.54
1.12
2.09
3.09
Dimensions
(in.)
A
1.25
1.63
2.00
2.50
3.00
3.50
B
.69
.81
.94
1.31
1.56
1.75
C
D
.75
1.00
1.25
1.50
1.75
2.00
E
.62
.75
1.00
1.25
1.50
1.75
1.12
1.38
1.75
2.25
2.75
3.25
G
.25
.31
.38
.50
.62
.75
J
.69
.81
1.00
1.31
1.50
1.88
M
R
.31
.38
.50
.63
.75
.88
U
2.25
2.72
3.44
4.25
5.13
5.78
V
1.69
2.06
2.50
3.19
3.88
4.94
1.25
1.47
1.88
2.44
2.94
3.46
Lifting
Products
Hardware
Slings
Engineered
Products
Hot Dip Galvanized
Quenched & Tempered
Crosby products meet or exceed all requirements
of ASME B30.26, including identification, ductility,
design factor, proof load and temperature requirements.
Importantly, Crosby products meet other critical
performance requirements, including fatigue life, impact
properties and material traceability, not addressed
by ASME B30.26.
401, 402 and 403 swivels are positioning devices and are not intended to rotate under load. Use in corrosive environment requires shank and nut inspection in
accordance with ASME B30.10-1.10.4(b)(5)(c)2009.
Wire
Rope
■
■
■
■
Services
G-402 Regular Swivels meet the performance requirements
of Federal Specification RR-C-271F, Type VII, Class 2,
except for those provisions required of the contractor.
*
1016019
1016037
1016055
1016073
1016091
1016117
1016135
1016135
1016199
1016215
850
1,250
2,250
3,600
5,200
7,200
10,000
12,500
18,000
45,200
Weight
Each
lbs.
.21
.39
.71
1.32
2.49
4.02
6.25
8.95
16.37
45.79
A
B
1.25
1.63
2.00
2.50
3.00
3.50
4.00
4.50
5.63
7.09
.69
.81
.94
1.31
1.56
1.75
2.06
2.31
2.69
3.88
C
.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
3.13
4.09
Dimensions
(in.)
D
J
1.06
1.25
1.50
2.00
2.38
2.63
3.06
3.50
3.69
3.88
.69
.81
1.00
1.31
1.50
1.88
2.13
2.38
3.00
3.75
M
.31
.38
.50
.63
.75
.88
1.00
1.13
1.50
2.25
R
2.94
3.56
4.31
5.44
6.56
7.19
8.38
9.63
11.44
16.69
S
1.69
2.06
2.50
3.19
3.88
4.31
5.00
5.75
6.75
9.91
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Load
Securement
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
Working
Load Limit
lbs. *
Contractors
Supply
in.
Stock
No.
G-402
Fall
Protection
Size
Cordage
G-402 Regular Swivel
403
7/3/13 9:41 AM
G-403 Jaw End Swivels
G-403 Jaw End Swivels meet the performance
requirements of Federal Specification RR-C-271F,
Type VII, Class 3, except for those provisions required
of the contractor.
U.S. Patent 5,381,650 and other equivalents.
■
■
■
■
Hot Dip Galvanized
Quenched & Tempered
Crosby products meet or exceed all requirements
of ASME B30.26, including identification, ductility,
design factor, proof load and temperature requirements.
Importantly, Crosby products meet other critical
performance requirements, including fatigue life, impact
properties and material traceability, not addressed by ASME B30.26.
401, 402 and 403 swivels are positioning devices and are not intended to rotate under load. Use in corrosive environment requires shank and nut inspection in
accordance with ASME B30.10-1.10.4(b)(5)(c)2009.
G-403 Jaw End Swivel
Size
in.
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
*
Stock
No.
G-403
1016395
1016411
1016439
1016457
1016475
1016493
1016518
1016536
1016572
1016590
Working
Load
Limit
lbs. *
850
1,250
2,250
3,600
5,200
7,200
10,000
12,500
18,000
45,200
Weight
Each
lbs.
.21
.34
.66
1.34
2.48
3.88
5.87
9.84
15.75
54.75
Dimensions
(in.)
A
1.25
1.63
2.00
2.50
3.00
3.50
4.00
4.50
5.69
7.00
B
.69
.81
.94
1.31
1.56
1.75
2.06
2.31
2.69
3.88
C
.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
3.13
4.09
G
.69
.81
1.00
1.31
1.63
1.88
2.13
2.63
3.13
5.63
K
.47
.50
.63
.75
.94
1.13
1.19
1.75
2.06
2.88
M
.31
.38
.50
.63
.75
.88
1.00
1.13
1.50
2.25
N
.88
.88
1.06
1.31
1.50
1.75
2.06
2.81
2.81
4.44
P
.25
.31
.38
.50
.63
.75
.88
1.13
1.38
2.25
R
2.63
2.94
3.63
4.50
5.31
6.06
7.00
8.56
9.75
14.25
U
1.69
2.06
2.50
3.19
3.88
4.31
5.00
5.75
7.06
10.00
V
1.69
1.81
2.25
2.88
3.44
4.00
4.53
5.94
6.38
10.84
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
404
7/3/13 9:41 AM
Overhead
Cranes / Jibs
Swivels
With Tapered Roller Thrust Bearing
Engineered
Products
Services
Hoists
Suitable for frequent rotation under load.
All swivels individually proof tested with certification.
All hooks furnished with latches assembled.
All jaws complete with bolts, nuts and cotter pins.
Pressure lube fitting provided.
NOT TO BE USED ON DEMOLITION (WRECKING) BALLS.
Other types and capacities up to 1250t, available to meet
your requirements.
IMPORTANT - Crosby Swivels should only be used with the
recommended wire rope. Contact the wire rope manufacturer
for the proper wire rope to be used with Crosby Swivels.
S-1 Jaw & Hook
WLL
(t) *
3-S-1
5-S-1
8-S-1
10-S-1
15-S-1
25-S-1
35-S-1
45-S-1
297011
297217
297413
297618
297814
298118
298216
298314
3
5
8-1/2
10
15
25
35
45
1/2
5/8
3/4
7/8
1
–
–
–
*
Weight
Each
(lbs.)
9.81
15.51
29.42
46.75
73.75
140
220
251
Dimensions (in.)
A
11.44
13.34
16.45
19.75
22.24
26.78
29.94
35.06
F
4.84
6.28
7.54
8.34
10.34
13.62
14.06
15.44
G
H
2.75
3.00
4.00
4.50
5.00
6.00
6.50
7.00
0.75
0.88
1.00
1.50
1.50
2.00
2.00
2.25
J
K
0.88
1.00
1.56
1.75
1.75
2.00
2.00
2.50
L
1.62
2.25
2.81
3.38
3.38
4.62
4.62
5.00
M
1.53
1.94
2.46
2.59
2.81
3.44
3.88
4.75
N
1.41
1.69
2.22
2.41
3.19
3.62
3.75
4.25
1.31
1.62
2.12
3.50
3.50
3.69
3.69
4.00
O
P
1.00
1.12
1.38
1.75
1.75
2.38
2.38
3.00
V
1.44
1.81
2.25
2.59
3.00
3.66
4.56
5.06
1.12
1.44
1.62
1.94
2.38
3.00
3.19
3.25
Slings
S-1
Stock
No.
Hardware
Swivel
No.
Wire
Rope
Size
(in.)
Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
S-2 Jaw & Jaw
3-S-2
5-S-2
8-S-2
10-S-2
15-S-2
25-S-2
35-S-2
45-S-2
297020
297226
297422
297627
297823
298127
298225
298323
3
5
8-1/2
10
15
25
35
45
1/2
5/8
3/4
7/8
1
–
–
–
Weight
Each
(lbs.)
9.63
13.69
26.16
45.75
62.75
140
155
235
Dimensions
(in.)
B
G
9.28
10.31
12.62
16.75
17.12
20.75
20.75
25.25
H
2.75
3.00
4.00
4.50
5.00
6.00
6.50
7.00
J
0.75
0.88
1.00
1.50
1.50
2.00
2.00
2.25
0.88
1.00
1.56
1.75
1.75
2.00
2.00
2.50
K
N
1.62
2.25
2.81
3.38
3.38
4.62
4.62
5.00
Lifting
Products
WLL
(t) *
O
1.31
1.62
2.12
3.50
3.50
3.69
3.69
4.00
1.00
1.12
1.38
1.75
1.75
2.38
2.38
3.00
Wire
Rope
S-2
Stock
No.
Cordage
*
Swivel
No.
Wire
Rope
Size
(in.)
S-3 Jaw & Eye
WLL
(t) *
Wire
Rope
Size
(in.)
Weight
Each
(lbs.)
3-S-3
5-S-3
8-S-3
10-S-3
15-S-3
25-S-3
35-S-3
45-S-3
297039
297235
297431
297636
297832
298136
298234
298332
3
5
8-1/2
10
15
25
35
45
1/2
5/8
3/4
7/8
1
–
–
–
9.12
13.50
24.90
43.50
61
135
150
225
*
Dimensions
(in.)
C
9.34
10.06
12.25
16.12
16.75
21.50
21.50
25.88
G
2.75
3.00
4.00
4.50
5.00
6.00
6.50
7.00
H
0.75
0.88
1.00
1.50
1.50
2.00
2.00
2.25
J
0.88
1.00
1.56
1.75
1.75
2.00
2.00
2.50
K
1.62
2.25
2.81
3.38
3.38
4.62
4.62
5.00
N
1.31
1.62
2.12
3.50
3.50
3.69
3.69
4.00
O
1.00
1.12
1.38
1.75
1.75
2.38
2.38
3.00
Q
0.75
1.00
1.25
1.69
1.94
2.25
2.25
2.50
R
1.03
1.28
1.41
1.69
2.03
2.31
2.31
2.53
S
1.12
1.25
1.62
2.75
2.75
3.88
3.88
4.00
Load
Securement
S-3
Stock
No.
T
1.25
1.25
1.50
1.88
2.12
2.38
2.38
3.00
Contractors
Supply
Swivel
No.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
■
■
■
■
■
■
■
■
405
7/3/13 9:41 AM
Swivels (Continued)
With Tapered Roller Thrust Bearing
S-4 Eye & Jaw
Swivel
No.
S-4
Stock
No.
WLL
(t) *
Wire
Rope
Size
(in.)
3-S-4
5-S-4
8-S-4
10-S-4
15-S-4
25-S-4
35-S-4
45-S-4
297048
297244
297440
297645
297841
298145
298243
298341
3
5
8-1/2
10
15
25
35
45
1/2
5/8
3/4
7/8
1
–
–
–
*
Weight
Each
(lbs.)
9
12.33
29
44
61
135
150
225
Dimensions (in.)
C
9.34
10.06
12.25
16.12
16.75
21.50
21.50
25.88
G
2.75
3.00
4.00
4.50
5.00
6.00
6.50
7.00
H
J
0.75
0.88
1.00
1.50
1.50
2.00
2.00
2.25
0.88
1.00
1.56
1.75
1.75
2.00
2.00
2.50
K
1.62
2.25
2.81
3.38
3.38
4.62
4.62
5.00
N
O
1.31
1.62
2.12
3.50
3.50
3.69
3.69
4.00
1.00
1.12
1.38
1.75
1.75
2.38
2.38
3.00
Q
0.75
1.00
1.25
1.69
1.94
2.25
2.25
2.50
R
1.03
1.28
1.41
1.69
2.03
2.31
2.31
2.53
S
T
1.12
1.25
1.62
2.75
2.75
3.88
3.88
4.00
1.25
1.25
1.50
1.88
2.12
2.38
2.38
3.00
S-5 Eye & Eye
*
Swivel
No.
S-5
Stock
No.
WLL
(t) *
Wire
Rope
Size
(in.)
Weight
Each
(lbs.)
3-S-5
5-S-5
8-S-5
10-S-5
15-S-5
25-S-5
35-S-5
45-S-5
297057
297253
297459
297654
297850
298154
298252
298350
3
5
8-1/2
10
15
25
35
45
1/2
5/8
3/4
7/8
1
–
–
–
8.5
11.3
29.25
42
49
130
145
215
Dimensions
(in.)
D
G
9.41
9.81
11.88
15.50
16.38
22.25
22.25
26.50
2.75
3.00
4.00
4.50
5.00
6.00
6.50
7.00
Q
R
0.75
1.00
1.25
1.69
1.94
2.25
2.25
2.50
1.03
1.28
1.41
1.69
2.03
2.31
2.31
2.53
S
T
1.12
1.25
1.62
2.75
2.75
3.88
3.88
4.00
1.25
1.25
1.50
1.88
2.12
2.38
2.38
3.00
S-6 Eye & Hook
Swivel
No.
S-6
Stock
No.
WLL
(t) *
Wire
Rope
Size
(in.)
3-S-6
5-S-6
8-S-6
10-S-6
15-S-6
25-S-6
35-S-6
45-S-6
297066
297262
297468
297663
297869
298163
298261
298369
3
5
8-1/2
10
15
25
35
45
1/2
5/8
3/4
7/8
1
–
–
–
*
Weight
Each
(lbs.)
9.32
14.24
32
45.5
63
135
215
270
Dimensions
(in.)
E
F
G
L
M
P
Q
R
S
T
V
11.50
13.09
16.07
19.12
21.24
27.53
30.69
35.69
4.84
6.28
7.54
8.34
10.34
13.62
14.06
15.44
2.75
3.00
4.00
4.50
5.00
6.00
6.50
7.00
1.53
1.94
2.46
2.59
2.81
3.44
3.88
4.75
1.41
1.69
2.22
2.41
3.19
3.62
3.75
4.25
1.44
1.81
2.25
2.59
3.00
3.66
4.56
5.06
0.75
1.00
1.25
1.69
1.94
2.25
2.25
2.50
1.03
1.28
1.41
1.69
2.03
2.31
2.31
2.53
1.12
1.25
1.62
2.75
2.75
3.88
3.88
4.00
1.25
1.25
1.50
1.88
2.12
2.38
2.38
3.00
1.12
1.44
1.62
1.94
2.38
3.00
3.19
3.25
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
406
7/3/13 9:41 AM
Overhead
Cranes / Jibs
Angular Contact Ball
Bearing Swivels
Model 61
Model 62
Model 63
Model 64
Model 65
Model 66
Model 67
Slings
Model 60
Engineered
Products
Services
Designed for high rotational speeds, these models
react to low operational torque…the perfect swivels
for longer ropes and cables.
Manufactured with two or more flush ground angular
contact ball bearings.
Bearings are permanently lubricated with high-pressure
grease and sealed at the factory.
Flush pins are available for overhead and
underground electrical line stringing
(please specify). Swivel ends are shaped to prevent snagging when gliding over sheaves and other
potential obstructions.
Heat treated high strength alloy steel, zinc plated for
corrosion resistance, provides the strongest yet lightest
swivel available. Ultimate strength is minimum 4.5 to 1
over SWL (Safe Working Load).
All swivels proof-tested and certified.
A
C
Pin
Dia.
D
E
F
G
H
I
J
Hole
Dia.
K
12
25
37
50
62
75
81
87
99
150
.5 (.9)
.75 (2)
1.5 (4)
3 (5)
5 (8)
8.5 (15)
8.5 (15)
10 (17)
15 (20)
35
1/8
1/4
3/8
1/2
5/8
3/4
3/4
7/8
1
1-1/2
7/8
1-1/4
1-1/2
1-7/8
2-7/16
2-7/8
2-7/8
3-5/8
3-5/8
5-3/8
5/16
3/8
7/16
5/8
7/8
1
1-1/8
1-1/2
1-1/2
2
5/16
19/32
19/32
3/4
1
1-9/32
1-9/16
1-3/4
1-3/4
2
1/4
5/16
1/2
3/4
1
1-1/4
1-1/4
1-23/32
2
2-1/4
15/32
11/16
13/16
15/16
1-9/16
2-1/8
2-1/8
3-1/2
3-1/2
3-11/16
7/8
31/32
1
1-11/32
1-11/16
2-1/4
2-1/4
3
3
3-3/4
3/8
1/2
23/32
15/16
1-5/16
1-5/8
1-5/8
2-27/32
2-25/32
3-1/8
3/8
7/16
9/16
13/16
1-1/8
1-1/4
1-1/4
1-3/4
1-3/4
2-3/8
1/4
3/8
5/8
7/8
1-1/4
1-3/8
1-3/8
1-5/8
2
2-1/4
3/8
7/16
5/8
15/16
1-3/16
1-1/2
1-1/2
1-13/16
2-1/8
2-3/8
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
All dimensions in inches
( ) For line stringing applications requiring a 3 to 1 Safe Working Load.
Wire
Rope
Wire
Rope
Size
Cordage
SWL
Tons
Load
Securement
Size
Lifting
Products
Hardware
■
■
■
■
■
■
Hoists
Streamlined Design
and Maximum Performance
407
7/3/13 9:41 AM
WARNING
Hooks
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Sliding Choker Hooks—
Quenched & Tempered
Forged Alloy Steel through 3/4”.
Wide throat to take heavy thimbles.
* When ordering, eye diameter “C”
should be specified.
Single
Part
Rope
Size
Eight
Part
Rope
Size
Safe
Working
Load
lbs.
A
C
E
L
3/8
1/2
* 5/8
* 5/8
* 3/4
* 3/4
n/a
1/8
3/16
3/16
1/4
1/4
2500
3300
5000
5000
8000
8000
2.06
2.25
3.06
3.06
3.38
3.38
.63
.75
.75
1
1
1.44
.63
.78
.94
.94
1.16
1.16
4.28
4.97
6.38
6.38
7.66
7.66
Dimensions (in.)
Snap Hooks—Forged Steel,
Quenched & Tempered
Safe
Working
Load
in.
lbs.
7/16
9/16
750
1000
Inside
Dia.
of Eye
in.
3/4
1-1/8
Throat
Opening
in.
Easily attached to any chain and
electric hoist with welded link load chain,
roller chain or wire rope with suitable
end fitting. Swivel jaw is forged.
Length
Overall
in.
3/4
13/16
.77
1.19
2.89
2.70
2.95
5.00
Replacement Hooks—
Quenched & Tempered
Pressed steel latches and stainless
steel springs, bolts and nuts.
Hook
Size
Weight
Pounds
Each
Size
Weight
Pounds
Each
3-15/16
4-3/4
Width
Hoist
tons
1/2
1
.23
.48
Between
Jaws
in.
9/16
11/16
Dia.
Bolt
in.
3/8
7/16
Overall
Length
in.
6-1/8
7-11/16
Throat
Opening
in.
Weight
Pounds
Each
31/32
1-18
1.25
2.61
Barrel Hooks—
Forge Carbon Steel
Sorting Hooks—
Forged Alloy Steel,
Quenched & Tempered
Deep straight throat permits efficient
handling of flat plates or large cylindrical
shapes. The long tapered point allows
easy grab in rings, pear links, eye bolts
or lifting holes.
Safe Working Load at Tip
Safe Working Load at Bottom of Hook
Overall Length
I.D. of Eye
Opening at Top of Hook
Radius at Bottom of Hook
Weight Pounds Each
I.D. of Eye
O.D. of Eye
Overall Length
Width of Lip
Weight Per Pair (pounds)
Safe Working Load
2 Ton
7-1/2 Ton
9-11/16"
1-3/8"
2-13/16"
5/8"
6.25
1-9/16"
2-13/16"
5"
2-7/8"
3-1/4
1 Ton
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
408
7/3/13 9:41 AM
Hoists
Forged Steel - Quenched and Tempered.
Design Factor is 4:1.
H-323 designed for Crosby Spectrum 4® chain.
A-323 designed for Crosby Spectrum 7® chain.
A-323
Alloy *
H-323
A-323
1026204
1026222
1026240
1026286
1026302
1026320
1026384 *
1026400 *
1026428 *
1026464 *
1026482 *
1026507
2600
3900
5400
9200
13000
20200
3500
4700
7100
12000
18100
24700
.28
.45
.79
1.75
3.25
5.94
Dimensions
(in.)
A
B
C
D
E
G
K
L
N
R
1.09
1.31
1.56
1.94
2.38
2.88
.53
.62
.75
.88
1.06
1.38
.31
.38
.44
.53
.66
.75
1.81
2.12
2.53
3.56
4.41
5.22
.34
.44
.50
.66
.78
.94
.88
.97
1.17
1.53
1.89
2.13
.47
.59
.72
.78
1.00
1.31
3.05
3.59
4.28
5.44
6.66
8.06
1.75
2.06
2.34
2.97
3.78
5.09
1.88
2.28
2.69
3.38
4.11
5.16
Hardware
These A-330 hooks are forged with an “8” designating Grade 80, and are suitable for use with Grade 8 chain in over head lifting applications
as long as hook is proof-tested as part of the chain sling assembly or as an individual component per ASME B30.9. We recommend the use of
the A-338 which is proof tested and supplied with a proof test certificate.
1/4
5/16
3/8
7/16
1/2
5/8
3/4
Working Load
Limit (lbs.)
H-330
Carbon
A-330
Alloy *
H-330
A-330
Weight
Each
(lbs.)
1027105
1027123
1027141
1027169
1027187
1027203
1027221
1027249 *
1027267 *
1027285 *
1027301
1027329 *
1027347
1027365
2600
3900
5400
7200
9200
13000
20200
3500
4700
7100
8750
12000
18100
24700
.36
.62
1.00
1.31
2.22
4.41
6.50
Dimensions
(in.)
A
B
C
D
E
G
H
K
L
N
P
R
1.00
1.22
1.42
1.66
1.88
2.31
2.62
.32
.43
.48
.66
.57
.71
.94
.31
.36
.49
.62
.51
.67
.94
1.81
2.12
2.53
3.09
3.56
4.39
5.22
.34
.44
.50
.56
.66
.78
.94
.88
.97
1.17
1.31
1.53
1.78
2.13
.72
.91
1.00
1.13
1.25
1.56
1.88
.47
.59
.72
.69
.78
1.09
1.31
3.05
3.66
4.42
4.94
5.72
6.83
8.13
1.75
2.06
2.34
2.66
2.97
4.31
5.09
.31
.38
.44
.56
.63
.75
.88
1.64
2.02
2.41
2.75
3.19
4.09
4.63
These A-330 hooks are forged with an “8” designating Grade 80, and are suitable for use with Grade 8 chain in over head lifting applications
as long as hook is proof-tested as part of the chain sling assembly or as an individual component per ASME B30.9. We recommend the use of
the A-338 which is proof tested and supplied with a proof test certificate.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Cordage
Stock
No.
Wire
Rope
Forged Steel - Quenched and Tempered.
Design factor is 4:1.
Features quick and easy assembly.
H-330 designed for Crosby Spectrum 4® chain.
A-330 designed for Crosby Spectrum 7® chain.
Chain
Size
(in.)
*
Lifting
Products
H-330 / A-330
Clevis Grab Hooks
■
■
■
■
■
Slings
H-323
Carbon
Weight
Each
(lbs.)
Load
Securement
*
Working Load
Limit (lbs.)
Contractors
Supply
1/4
5/16
3/8
1/2
5/8
3/4
Stock
No.
Fall
Protection
Chain
Size
(in.)
Engineered
Products
Services
■
■
■
■
Overhead
Cranes / Jibs
H-323 / A-323
Eye Grab Hooks
409
7/3/13 9:41 AM
H-324
Eye Slip Hooks
■ Forged Carbon Steel – Quenched and Tempered.
■ Not Suitable for use with Grade 80 chain and chain slings used in overhead lifting. For slings or lifting chains, Grade 80 or 100 alloy components are
recommended.
Chain
Size
(in.)
1/4
5/16
3/8
7/16
1/2
5/8
3/4
*
Stock
No.
H-324
Working
Load
Limit
(lbs.)
Weight
Each
(lbs.)
1950
2875
4000
5000
6500
9250
12500
.40
.64
1.10
1.56
2.09
3.90
6.93
1026749
1026767
1026785
1026801
1026829
1026847
1026865
Dimensions
(in.)
A
B
C
D
E
F
G
H
K
L
N
R
1.06
1.25
1.53
1.69
1.94
2.38
2.88
.50
.63
.72
.81
.94
1.13
1.38
.28
.34
.41
.44
.50
.63
.75
2.75
3.06
3.63
4.34
4.81
5.63
6.75
.94
1.06
1.31
1.56
1.69
2.00
2.13
1.19
1.25
1.50
1.81
1.94
2.38
2.75
.81
.94
1.13
1.38
1.56
1.81
2.19
.88
1.00
1.19
1.44
1.63
1.94
2.31
.50
.56
.66
.81
.91
1.09
1.31
3.66
4.23
4.89
5.70
6.34
7.66
8.73
2.13
2.25
2.56
3.06
3.44
4.00
4.75
2.56
2.95
3.36
3.88
4.28
5.22
5.80
H-331 / A-331
Clevis Slip Hooks
■ Forged Carbon Steel or Forged Alloy Steel –
■ All pins are Alloy Steel – Quenched and Tempered.
■ Not Suitable for use with Grade 80 chain and chain slings used in overhead lifting. For slings or lifting chains, Grade 80 or 100 alloy components are
recommended.
Chain
Size
(in.)
1/4
5/16
3/8
7/16
1/2
5/8
3/4
*
Stock
No.
Working Load
Limit (lbs.)
H-331
Carbon
A-331
Alloy *
H-331
A-331
Weight
Each
(lbs.)
1027383
1027409
1027427
1027445
1027463
1027481
–
1027524
1027542
1027560
1027588
1027604
1027622
1027640
1950
2875
4000
5000
6500
9250
–
2750
4300
5250
7000
9000
13500
19250
.55
.79
1.21
2.06
2.75
4.75
11.28
Dimensions
(in.)
A
B
C
D
E
F
G
H
1.06
1.22
1.38
1.73
1.88
2.31
3.19
.32
.43
.45
.59
.57
.71
1.18
.29
.34
.44
.60
.53
.71
1.29
2.75
3.06
3.63
4.34
4.81
5.63
7.38
.94
1.06
1.31
1.56
1.69
2.00
2.50
1.19
1.25
1.50
1.81
1.94
2.38
3.00
.81
.94
1.13
1.38
1.56
1.81
2.38
.88
1.00
1.19
1.44
1.63
1.94
2.50
K
L
.50 3.95
.56 4.52
.66 5.15
.81 5.97
.91 6.53
1.09 7.89
1.44 10.02
N
P
R
T
2.13
2.25
2.56
3.06
3.44
4.00
5.06
.31
.38
.44
.56
.63
.75
1.00
2.58
2.87
3.25
3.70
4.00
4.94
6.09
.81
.97
1.06
1.19
1.31
1.56
2.09
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
410
7/3/13 9:41 AM
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Gate Types
Services
Hoists
Brass alloy Golden Gates® are engineered for quality,
easy handling and dependability. The heavy-duty, corrosion
resistant locking mechanism will stay locked until an
operator releases it; yet, can easily be shut with one hand.
Cost effective, these gates reduce down time, providing
the alternative to conventional latches.
Overhead
Cranes / Jibs
WARNING
Golden Gate® Hooks
LIF-LOK®
LIF-LOK GATE—Size 1
®
Engineered
Products
To lock: close the gate; the built-in spring locks the
gate against the hook tip.
To unlock: lift the gate upward on the hook shank
and swing open.
Slings
PIN-LOK®—Sizes 2 through 4
To lock: close the gate; a stainless steel pin is
carried in a horizontal bore and engages a milled slot
in the hook shank.
Hardware
PIN-LOK®
To unlock: simply depress the stainless steel pin which
causes the pin to disengage from the milled slot.
Lifting
Products
ROLLOX® GATE—Sizes 5 through 9
To lock: close the gate; a stainless steel pin is mounted
in a horizontal bore which passes through the gate and
engages a notch milled in the hook shank.
To unlock: move the lever downward a quarter-turn or
until it stops, the gate can now swing open 160° (approx.).
Wire
Rope
ROLLOX®
TIP-LOK® GATE—Sizes 10 through 17
Cordage
To lock: press the arm down until the lock trips;
two arms of the gate now enclose the tip of the hook.
Load
Securement
To unlock: manually depressing the locking trigger
automatically raises the movable arm, allowing the gate
to be rotated open.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
TIP-LOK®
411
7/3/13 9:41 AM
WARNING
Golden Gate® Hooks
(Continued)
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Hook Connectors
The six connector styles shown to the right make it
possible for Crosby to furnish a Golden Gate Hook to fit
almost any make or model of hoisting equipment.
Each connector is available with either a self-closing or
manual closing gate. (e.g.: A size 4 hook with a closed swivel
bail connector and self-closing gate is 4-C; with manual
closing gate, it is 4-A.)
Closed Swivel Bail—For use where hoisting line
or shackle can be inserted into the bail.
■ Hook sizes: 1 through 14
■ Style C—with self-closing gate.
■ Style A—with manual-closing gate.
Shank Type Hook (standard length)—For use on
existing load blocks, with standard shank length.
Closed Swivel Bail
Shank Type Hook
Shank Type Hook
Universal Type
Link Chain Nest
Roller Chain Nest
Shank Type Hook (long length)—For use on existing
blocks requiring extra shank length.
Universal Type—Open swivel bail for attachment
to link chain.
■ Hook sizes: 3, 4 and 5
■ Style E—with self-closing gate.
■ Style G—with manual-closing gate.
Link Chain Nest—With ball-bearing swivel; attaches to
chain by an alloy pin.
■ Style O—with self-closing gate.
■ Style P—with manual-closing gate.
Roller Chain Nest—Attached with ball-bearing swivel
and full-floating connector.
■ Style S—with self-closing gate.
■ Style R—with manual-closing gate.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
412
7/3/13 9:41 AM
Overhead
Cranes / Jibs
Hook Data Form
Hook Size:
Sales Order:
Hoists
Working Load Limit (Tons):
Hoist Name & Model:
Top Hook and/or Bottom Hook:
Is Self-Closing Gate Required:
Services
Name of Person Completing
Form:
Phone:
Engineered
Products
Distributor:
Distributor P.O.:
Accurate dimensions are important.
Measure total USABLE shank length from top of hook shank to top of of gate assembly. Gate assembly is
not considered part of the USABLE SHANK. When measuring other manufacturer's hooks, measure from the top of the hook shank to the hook shoulder.
Measure threaded portion (enter BLANK if threads
not required).
Hardware
1.
2.
Slings
Shank Length
Lifting
Products
Note: Hook is supplied with Steel Hex-Load Nut
and Bronze Load Washer. Hook and Nut threads
are National Coarse. If a SPECIAL Load Nut or Load Washer is required, attach a drawing to this form.
Wire
Rope
Shank Diameter
3. Measure width of threaded portion.
4. Measure width of blank portion.
Cordage
Throat Opening
5. ONLY measure throat opening if this distance is
critical to customer's operation.
Load
Securement
Cross Hole in Shank Hooks
(complete only if required)
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
6. Measure shank length from center of hole to top
of gate assembly.
7. Measure diameter of hole.
413
7/3/13 9:41 AM
WARNING
Weld-On
Excavator Hooks
■
■
■
■
*
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
The original weld-on hook from Gunnebo Lifting
Each hook is furnished with welding and
loading instructions
Replacement latch and latch springs available.
Full traceability for each component
Dimensions
(in.)
Model
Working
Load Limit
(tons) *
B
C
G
H
K
L
S
A
Weight
Each
(lbs.)
UKN-0.75 **
UKN-1 **
UKN-2 **
UKN-3
UKN-4
UKN-5
UKN-8
UKN-10
UKN-15
.75
1
2
3
4
5
8
10
15
.79
.79
1
1.2
1.1
1.3
1.3
1.9
2.1
2.2
2.8
3.4
4.1
4.5
5.2
5.2
6.7
7.4
.51
.67
.79
.91
1.1
1.2
1.5
1.7
2.0
.79
.99
1.2
1.3
1.5
1.9
2
2.3
2.6
.75
.99
1.2
1.4
1.7
1.8
2
2.2
2.4
3.2
3.7
4.5
5.2
5.5
6.5
6.8
8.7
9.4
.20
.24
.31
.39
.43
.47
.51
.55
.59
.12
.16
.20
.24
.28
.32
.35
.35
.47
.66
1.3
2.2
2.2
2.9
6.4
7.7
14.1
19.4
Design Factor 5:1 proof tested and certified
For welding use Electrode AWS A 5.1 E 7018
** Welding plate on UKN-0.75, UKN-2, and UKN-1 is slightly curved.
Eye Type
Self-Locking Hooks
■
■
■
■
■
■
■
*
The Original Self-Locking Hook
Latch closes automatically under load.
Hook will not open when under load.
Oversized eye allows attachment to either chain or
wire rope slings
Stainless steel spring release trigger will only operate when hook is unloaded
Full traceability
Proof tested to 2-1/2 times working load limit
Model
Chain
Size
(in.)
Working
Load Limit
(lbs.) *
BK-6-10
BK-7/8-10
BK-7/8-10
BK-10-10
BK-13-10
BK-16-10
BK-18/20-10
BK-22-8
BK-26-8
BK-28-8
7/32
9/32
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
2,700
4,300
5,700
8,800
15,000
22,600
35,300
34,200
47,700
55,100
Design Factor 4:1 Proof tested and certified.
Dimensions (in.)
L
B
4.3
5.4
5.4
6.6
8.1
10
11.4
12.6
13.6
15.7
1.1
1.5
1.5
1.7
2.1
2.4
2.7
3.1
3.9
4.7
E
.87
1.1
1.1
1.3
1.7
2.2
2.4
2.8
3.1
3.5
F
.39
.43
.43
.51
.63
.79
.87
.95
1
1.1
G
.59
.67
.67
.83
1.2
1.5
1.7
1.9
2
2.4
H
.83
1
1
1.2
1.5
1.9
2.5
2.4
2.7
3.2
Weight
Each
(lbs.)
1.1
2
2
3.3
6.2
12.3
18.3
24.7
32
48.5
** Grade 100 hooks have recessed trigger
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
414
7/3/13 9:41 AM
Working
Load Limit
(lbs.) *
BKL-6-10
BKL-7/8-10
BKL-7/8-10
BKL-10-10
3-106-8
BKL-16-10
BKL-18/20-10
7/32
9/32
5/16
3/8
1/2
5/8
3/4
100
100
100
100
100
100
100
2,700
4,300
5,700
8,800
15,000
22,600
35,300
*
Services
L
B
5.9
7.2
7.2
8.6
11
13.5
14.4
1.1
1.5
1.5
1.7
2.1
2.4
2.7
.90
1.1
1.1
1.4
1.9
2.6
2.8
1.3
1.5
1.5
1.7
1.9
2.4
2.9
G
.43
.47
.47
.59
.75
.87
1
H
.59
.67
.67
.83
1.2
1.5
1.7
.83
1
1
1.2
1.5
1.9
2.5
Weight
Each
(lbs.)
1.5
2.6
2.6
4.4
8.4
15.6
24.5
Design factor 4:1 Proof tested and certified.
Grade 100 hooks have recessed trigger. Hook can not be rotated when under a load
WARNING
S-265 Weld-On Pivot Link
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Wire
Rope
Forged Steel — Quenched and Tempered.
Forged from 1035 Carbon Steel.
Excellent welding qualities.
Reference American Welding Society specifications
for proper welding procedures.
1.2
3.2
5.3
8
15
Weight
Eeach
(lbs.)
A
B
C
D
F
G
H
1290740
1290768
1290786
1290802
1290820
.88
1.32
2.65
5.29
13.01
1.57
1.77
2.17
2.76
3.82
1.42
1.73
1.97
2.52
3.54
3.27
3.90
4.84
5.67
7.60
1.38
1.65
1.93
2.52
3.39
.51
.71
.87
1.02
1.34
2.60
3.19
3.90
4.80
6.50
1.65
1.89
2.24
2.64
3.70
Minimum
Fillet
Weld Size
(in.)
3/32
3/32
1/4
1/4
5/16
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Contractors
Supply
1
2.5
4.2
6.4
12
Dimensions (in.)
Stock No.
S-265
Fall
Protection
Working Load Limit (t)
Design
Design
Factor
Factor
5:1
4:1
Load
Securement
Cordage
■
■
■
■
Dimensions
(in.)
C
E
F
Engineered
Products
Grade
Slings
Chain
Size
(in.)
Hardware
Model
Hoists
Swivels on a bushing to position hook before loading
Latch closes automatically under load.
Hook will not open when under load.
Full traceability
Proof tested to 2-1/2 times working load limit
Stainless steel spring release trigger will only operate when hook is unloaded
Lifting
Products
■
■
■
■
■
■
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Overhead
Cranes / Jibs
WARNING
Swivel Bronze Bushing
Self-Locking Hooks
415
7/3/13 9:41 AM
WARNING
S-319 / S-319N
Shank Hooks
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Patented trademark indicates QUIC-CHECK® product.
Hook Material Codes: A-Alloy Steel, B-Bronze High
Strength, C-Carbon Steel.
■
■
■
■
■
■
■
■
The most complete line of shank hoist hooks.
Available 3/4 to 300 metric tons.
Hook Identification code forged into each hook.
Available in carbon steel, alloy steel and bronze.
Proper design, careful forging, and precision
controlled quench and tempering give maximum strength without excessive weight and bulk.
Every Crosby Shank Hook has a pre-drilled cam,
which can be equipped with a latch. Simply purchase the latch assemblies. Even years after
purchase of the original hook, latch assemblies
can be added.
Type Approval and certification in accordance
with ABS 2006 Steel Vessel Rules 1-1-17.7, and
Patented McKissick Split-Nut retention system available.
Working Load Limit
(tons)
Carbon
Alloy
Bronze
3/4
1
.5
1
1-1/2
.6
1-1/2
2
1
2
3
1.4
3
5
2
5
7
3-1/2
7-1/2
11
5
10
15
6-1/2
15
22
10
20
30
–
20
30
–
25
37
–
25
37
–
30
45
–
30
45
–
40
60
–
40
60
–
50
75
–
50
75
–
–
100
–
–
100
–
–
150
–
–
200
–
–
300
–
*
**
Hook
Identification
319C 319A 319B
DC
DA
DB
FC
FA
FB
GC
GA
GB
HC
HA
HB
IC
IA
IB
JC
JA
JB
KC
KA
KB
LC
LA
LB
NC
NA
NB
OC
OA
–
OC
OA
–
PC
PA
–
PC
PA
–
SC
SA
–
SC
SA
–
TC
TA
–
TC
TA
–
UC
UA
–
–
UA
–
–
WA
–
–
WA
–
–
XA
–
–
YA
–
–
ZA
–
D
2.86
3.16
3.59
4.00
4.84
6.28
7.54
8.34
10.34
13.62
13.62
14.06
14.06
15.44
15.44
18.50
18.50
20.62
20.62
23.00
23.00
24.38
26.69
30.12
F
G
1.25 .73
1.38 .84
1.50 1.00
1.62 1.14
2.00 1.44
2.50 1.82
3.00 2.26
3.25 2.60
4.25 3.01
5.00 3.62
5.00 3.62
5.38 4.56
5.38 4.56
6.00 5.06
6.00 5.06
7.00 6.00
7.00 6.00
7.75 6.69
7.75 6.69
6.81 8.59
6.81 8.59
6.75 9.12
7.50 9.75
9.50 10.62
Shank hook dimensions
with PL Latch Assembled
H
.81
.94
1.16
1.31
1.63
2.06
2.63
2.94
3.50
4.62
4.62
5.00
5.00
5.50
5.50
6.50
6.50
7.25
7.25
9.88
9.88
10.94
11.81
12.94
J
.93
.97
1.06
1.19
1.50
1.78
2.41
2.62
3.41
4.00
4.00
4.25
4.25
4.75
4.75
5.75
5.75
6.50
6.50
5.88
5.88
6.00
6.60
8.00
K
.63
.71
.88
.94
1.31
1.66
1.88
2.19
2.69
3.00
3.00
3.62
3.62
3.72
3.72
4.44
4.44
4.81
4.81
5.50
5.50
6.00
7.00
7.25
Dimensions
(in.)
L
M
O
5.14 .63
* .93
5.68 .71
* .97
6.35 .88 * 1.06
7.14 .94 * 1.16
8.63 1.13 * 1.41
10.43 1.44 * 1.69
12.52 1.63 * 2.22
13.47 1.94 * 2.22
16.65 2.38 * 2.41
23.09
–
* 3.19
31.09
–
3.25
32.12
–
3.25
41.12
–
3.00
34.12
–
3.00
43.12
–
3.38
36.06
–
3.38
47.56
–
4.12
41.16
–
4.12
49.16
–
5.38
42.12
–
5.38
48.12
–
4.50
45.75
–
4.50
50.50
–
5.00
54.69
–
6.25
P
1.96
2.22
2.44
2.78
3.47
4.59
5.25
5.96
6.88
8.78
8.78
11.38
11.38
12.63
12.63
14.81
14.81
16.53
16.53
17.38
17.38
18.00
19.25
22.69
R
2.35
2.59
2.76
3.16
3.85
4.77
5.88
6.37
8.14
9.44
9.44
12.56
12.56
14.00
14.00
15.50
15.50
19.38
19.38
18.41
18.41
18.38
20.50
20.50
T
.97
.97
1.03
1.16
1.53
1.94
2.46
2.59
2.81
3.44
3.44
3.88
3.88
4.75
4.75
5.69
5.69
6.00
6.00
7.00
7.00
7.00
8.00
8.25
X **
.59
.66
.72
.88
1.16
1.41
1.81
2.00
2.56
3.12
3.12
4.00
4.00
4.00
4.00
4.50
4.50
5.00
5.00
7.00
7.00
7.25
8.00
9.50
Y
2.06
2.25
2.59
2.84
3.34
3.84
4.38
4.50
5.50
10.00
18.00
15.00
24.00
15.00
24.00
14.50
26.00
15.00
23.00
15.00
21.00
18.00
20.00
20.00
Z
.69
.78
.88
1.00
1.25
1.56
1.94
2.19
2.63
3.12
3.12
4.00
4.00
4.00
4.00
4.50
4.50
5.00
5.00
7.00
7.00
7.25
8.00
9.50
Weight
(lbs.)
.50
.75
1
1.82
3.69
7.25
13.49
18
35.33
72
85.50
134
172
182
214
268
312
390
426
610
675
735
1020
1390
Dimensions shown are for S-4320 Latch kits. Dimensions for sizes 20 ton carbon and larger are for PL Latch Kits.
Dimension before machining (as forged).
Note: Proof load is 2 times Working Load Limit. All carbon hooks—average straightening load (ultimate load) is 5 times Working Load Limit.
Alloy eye hooks 1 ton through 22 ton—average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 tons
through 60 tons—average straightening load (ultimate load) is 4.5 times Working Load Limit. All Alloy shank hooks- average straightening load
(ultimate load) is 4.5 times the Working Load Limit. All Bronze hooks—average straightening load (ultimate load) is 4 times Working Load Limit.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
416
7/3/13 9:41 AM
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Hoists
Custom Crane Hook
Overhead
Cranes / Jibs
WARNING
Design-A-Crane Hook
A = ___________________________________________
B = ___________________________________________
C = ___________________________________________
Services
D = ___________________________________________
E = ___________________________________________
F = ___________________________________________
Engineered
Products
G = ___________________________________________
H = ___________________________________________
J = ___________________________________________
K = ___________________________________________
Slings
L = ___________________________________________
M = ___________________________________________
N = ___________________________________________
B
C
D
E
F
G
H
J
K
L
(min)
M
N
O
P
5 Ton
1-5/8
1-15/16
2-3/32
1-15/32
3-3/8
3-3/4
3-9/32
13
5-1/4
5
5-1/2
4-13/16
1-7/8
1-5/16
3
10 Ton
2-1/4
2-5/8
2-7/8
2-1/32
4-5/8
4-11/16
4-5/32
17
6-31/32
6-3/4
7
6-7/16
2-17/32
1-25/32
4-1/16
15 Ton
2-3/4
3-1/4
3-15/32
2-7/16
5-9/16
5-3/8
4-45/64
19
8-1/4
7-7/8
8-3/8
7-9/16
3-1/32
2-1/8
4-7/8
20 Ton
3-1/4
3-3/4
4
2-25/32
6-3/8
6
5-1/4
20
9-3/8
8-3/4
9-3/8
8-5/8
3-15/32
2-7/16
5-9/16
25 Ton
3-1/2
4-1/16
4-7/16
3-1/8
7-1/8
6-1/2
5-11/16
22
10-3/8
9-1/2
10-1/8
9-1/2
3-29/32
2-3/4
6-1/4
30 Ton
3-3/4
4-5/16
4-27/32
3-3/8
7-3/4
7
6-1/8
24
11-1/4
10-1/2
10-7/8
109/32
4-1/4
2-21/32
6-25/32
35 Ton
4-1/4
4-7/8
5-3/16
3-5/8
8-5/16
7-7/16
6-1/2
26
12-1/32
10-7/8
11-7/8
11
4-17/32
3-3/8
7-9/32
7-25/32
40 Ton
4-1/2
5-3/16
5-9/16
3-7/8
8-7/8
7-13/16
6-21/32
27
12-25/32
11-3/8
12-5/8
11-11/16
4-7/8
3-13/32
50 Ton
5
5-3/4
6-3/16
4-5/16
9-7/8
8-9/16
7-1/2
30
14-5/32
12-1/2
14
12-15/16
5-13/32
3-25/32
8-5/8
60 Ton
5-1/2
6-5/16
6-3/4
4-3/4
10-13/16
9-1/4
8-3/32
32
15-7/16
13-1/2
15-3/8
14-1/8
5-15/16
4-5/32
9-1/2
75 Ton
6
6-7/8
7-1/2
5-1/4
12
10-1/8
8-55/64
34
17-1/16
14-3/8
16-5/8
15-9/16
6-9/16
4-19/32
10-1/2
100 Ton
6-3/4
7-3/4
8-5/8
6-1/32
13-13/16
11-1/2
10-1/16
40
19-9/16
16-25/32
18-7/8
17-27/32
7-9/16
5-19/64
12-3/32
Contractors
Supply
Contact your local Lifting Specialist with your custom dimensions
using the drawing from above.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
Wire
Rope
A
KCI Crane Service
Fall
Protection
Sizes
Cordage
Standard Heavy Mill Duty Crane Hooks
Load
Securement
P = ___________________________________________
Lifting
Products
Hardware
O = ___________________________________________
417
7/3/13 9:41 AM
WARNING
Standard Alloy J-Hooks
■
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Alloy components are 8620 or 4130 alloy steel.
Style A
Style B
Style
Trade
Size
(in.)
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-3/8
1-1/2
Style C
Material
Diameter
A
(in.)
.31
.38
.50
.63
.75
.88
1
1.13
1.25
1.38
1.5
.31
.38
.50
.63
.75
.88
1
1.13
1.25
1.38
1.5
.31
.38
.50
.63
.75
.88
1
1.25
1.38
1.5
Inside
Reach
B
(in.)
5
6
8
9
10
12
14
15
16
17
18
5
6
8
9
10
12
14
15
16
17
18
5
6
8
9
10
12
14
16
17
18
Inside Eye
Diameter
C
(in.)
.75
.75
.75
1
1
1
1.25
1.25
1.5
1.5
2
.75
.75
.75
1
1
1
1.25
1.25
1.5
1.5
2
.75
.75
.75
1
1
1
1.25
1.5
1.5
2
Bowl
Opening
D
(in.)
1.25
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
1.25
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
1.25
1.5
2
2.5
3
3.5
4
5
5.5
6
Tip
Length
E
(in.)
.25
.38
.5
.63
.75
.88
1
1.12
1.25
1.38
1.5
.25
.38
.5
.63
.75
.88
1
1.12
1.25
1.38
1.5
.25
.38
.5
.63
.75
.88
1
1.25
1.38
1.5
Approx.
Weight
(lbs.)
Working
Load Limit
(lbs.)
.4
.42
1.17
1.5
4
5
6.5
7.90
11.50
14.20
17.50
.4
.42
1.17
1.5
4
5
6.5
7.90
11.50
14.20
17.50
.4
.42
1.17
1.5
4
5
6.5
11.50
14.20
17.50
250
350
650
850
1,200
1,500
2,000
2,250
2,750
3,000
3,500
250
350
650
850
1,200
1,500
2,000
2,250
2,750
3,000
3,500
250
350
650
850
1,200
1,500
2,000
2,750
3,000
3,500
Larger sizes available upon request.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
418
7/3/13 9:41 AM
____________________________
Customer = ____________________________
SO # = ____________________________
DWG # = ____________________________
Diameter A = ____________________________
Length B =
____________________________
Length C = ____________________________
Diameter D =
____________________________
Length E = ____________________________
Taper Tip = ______ Yes
Style C
C
ØA
Services
Quantity = Style B
B
E
D
Engineered
Products
____________________________
Hoists
Style A
Capacity = SEE WARNING INFORMATION
ON PAGES 454 - 461.
Overhead
Cranes / Jibs
WARNING
Design-A-J-Hook
(MCJH)
Slings
______ No
Hardware
Special Notes (Sketch taper tip):
______________________________________________
______________________________________________
Lifting
Products
______________________________________________
______________________________________________
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
Load
Securement
Cordage
Wire
Rope
______________________________________________
419
7/3/13 9:41 AM
WARNING
S-4320 Latch Kit
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
S-4320 Replacement Latch Kit for
319N, 320N, 322N, 339N and NEW 1327
and 1339 Hooks.
■
■
■
■
Heavy duty stamped latch interlocks with
the hook tip.
High cycle, long life spring.
Can be made into a “Positive Locking” Hook
when proper cotter pin is utilized.
Latch kits shipped unassembled and individually
packaged with instructions.
IMPORTANT: The new S-4320 Latch Kit will not fit
the old style 319, 320 and 322 hooks.
Example of Hook ID
placement location
Hook Size (t)
*
Carbon
Alloy
Bronze
3/4
1
1-1/2
2
3
5
7-1/2
10
15
1
1-1/2
2
3
5
7
11
15
22
.5
.6
1
1.4
2
3.5
5
6.5
10
Hook ID
Code
D
F
G
H
I
J
K
L
M
S-4320
SS-4321 *
Weight
Each
(lbs.)
1096325
1096374
1096421
1096468
1096515
1096562
1096609
1096657
1096704
1097100
1097109
1097118
1097127
1097136
1097145
1097154
1097163
1097172
.03
.04
.04
.06
.10
.15
.28
.33
.84
Stock No.
Dimensions (in.)
B
D
E
.50
.54
.63
.66
.83
1.04
1.25
1.35
1.66
.15
.17
.17
.17
.20
.20
.27
.27
.39
1.44
1.56
1.66
1.91
2.31
2.88
3.56
3.81
5.16
SS-4320 is Stainless Steel construction with cad plated steel nuts.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
420
7/3/13 9:41 AM
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Latch Ordering Instructions:
Services
Hot dip galvanized.
Heavy-duty latch with easy operating features.
Flapper lever indicates locked or unlocked position.
Assembly instructions included with each latch.
Meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) (when secured with the bolt, nut
and pin) for lifting personnel.
Engineered
Products
■
■
■
■
■
Hoists
1. Specify PL, PL-N or PL-O latch kit stock number
from charts below.
2. Specify capacity of hook to which latch will be
assembled.
3. Specify hook material (carbon or alloy).
Overhead
Cranes / Jibs
WARNING
PL Latch Kits
†I
†J
†K
†L
†N
O
P
S
T
U
W-X
Y
Z
1093711
1093712
1093713
1093714
1093715
1093716
1093717
1093718
1093719
1093720
1093721
1093723
1093724
0.54
0.66
1
1.25
2.96
4.05
8.63
10
14.3
27
33.25
45
55
A
2.57
3
3.63
4
5.31
6
7
6.75
8
9.88
10.88
11.88
12.5
B
2.34
2.34
2.77
3.22
4
4.44
6.63
7
7.66
8.19
11.06
11.19
12.19
Dimensions
(in.)
C
D
1.94
2
2.38
2.69
2.91
3.19
4.06
4.03
4.38
5.13
6.38
6.38
8
0.56
0.63
0.63
0.63
0.84
1.06
2.24
2.24
3.46
3.38
3.38
3.38
3.38
E
1.13
1.38
1.63
1.88
2.38
2.88
4.5
4.75
5.5
6.5
7.5
8.75
9.75
F
2
2.22
2.38
3.38
3.44
4.25
6.12
6.38
7.25
8.88
10
11.25
13
Wire
Rope
Weight
Each
(lbs.)
New 319N style hook.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
†
4-1/2
7
11
15
22
30
37
45
60
75
100-150
200
300
PL
Latch Kit
Stock No.
Cordage
3
5
7-1/2
10
15
20
25
30
40
50
–
–
–
Hook ID
Code
Load
Securement
Hook Size
(t)
Carbon
Alloy
Lifting
Products
Hardware
Slings
IMPORTANT: The PL latch will not work on
319N, 320N or 322N hooks. The PL-N/O Latches,
in the sizes available, will work on both the old
and new style hooks.
421
7/3/13 9:41 AM
WARNING
PL-N/O Latch Kits
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
1. Specify PL, PL-N or PL-O latch kit stock number
from chart below.
2. Specify capacity of hook to which latch will be
assembled.
3. Specify hook material (carbon or alloy).
■
■
■
■
■
Heavy-duty latch with easy operating features.
PL-N designed for Crosby 319N & 320N style hooks, PL-O designed for Crosby 319 & 320 old style hooks.
Flapper lever indicates locked or unlocked position.
Assembly instructions included with each latch.
Meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) (when secured with the supplied
toggle pin) for lifting personnel.
IMPORTANT: The PL latch will not work on
319N, 320N or 322N hooks. The PL-N/O Latches,
in the sizes available, will work on both the old
and new style hooks.
Hook Size
(t)
Carbon
Alloy
3
5
7-1/2
10
15
*
4.5 / 5 *
7
11
15
22
Hook
ID
Code
I
J
K
L
N
PL-N
PL-O
Latch Kit Latch Kit
Stock No. Stock No.
1092000
1092001
1092002
1092003
1092004
1091900
1091901
1091902
1091903
1091904
Weight
Each
(lbs.)
0.8
1.3
2.0
2.8
4.9
A
2.40
2.94
3.63
4.00
5.19
B
2.01
2.50
3.02
3.39
4.32
Dimensions
(in.)
C
D
0.83
1.00
1.19
1.34
1.61
2.13
2.52
2.75
3.19
3.86
E
2.71
3.19
3.44
4.00
4.81
F
3.44
3.83
4.38
4.50
5.13
“N” style hooks are rated at 5 tons.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
422
7/3/13 9:41 AM
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Hook Size
(t)
Carbon
Alloy
Bronze
3/4
1
1-1/2 - 2
3
5
7-1/2 - 10
15
20
25 - 30
40
1
1-1/2
2-3
4-1/2
7
11 - 15
22
30
37 - 45
60
Hook
ID
Code
0.5
0.6
1.0 - 1.4
2.0
3.5
5.0 - 6.5
10.0
–
–
–
Stock No.
S-4055
D
F
G/H
I
J
K/L
N
O
P/S
T
Services
Stainless steel construction with cadmium plated
steel nuts.
Shipped packaged and unassembled.
Instructions included for easy field assembly.
Weight
Each
(lbs.)
1090027
1090045
1090063
1090081
1090107
1090125
1090143
1090161
1090189
1090205
0.02
0.02
0.03
0.06
0.11
0.17
0.39
0.63
1.12
1.77
A
0.38
0.38
0.47
0.56
0.58
0.59
0.83
0.94
2.19
3.31
Dimensions
(in.)
B
C
0.16
0.16
0.19
0.17
0.20
0.27
0.39
0.52
0.39
0.52
Engineered
Products
■
■
■
D
1.44
1.60
1.84
2.41
2.97
3.66
4.94
5.88
6.50
7.88
0.59
0.59
0.82
1.00
1.21
1.50
1.90
2.56
3.84
4.12
Slings
Specify latch kit stock number.
Specify capacity of hook to which latch will
be assembled.
Specify hook material (carbon or alloy).
Hardware
1.
2.
3.
Hoists
Overhead
Cranes / Jibs
WARNING
S-4055
Latch Kits
Lifting
Products
S-4088 Alloy
Hook Latch Kits
Specify latch kit stock number.
Specify capacity of hook to which latch will
be assembled.
Specify hook material (carbon or alloy).
■
■
To be used on A-327 and A-339 Grade 8 Sling Hooks.
Latch Kits shipped unassembled and individually
packaged with instructions.
.06
.14
.15
.15
.15
.15
Cordage
Dimensions
(in.)
B
C
A
.78
1.03
1.03
1.03
1.53
1.53
.16
.19
.19
.19
.26
.26
2.03
2.69
3.00
3.25
4.13
4.66
Load
Securement
S-4088
1090250
1090251
1090252
1090253
1090254
1090255
Weight
Each
(lbs.)
D
.94
1.25
1.25
1.25
1.88
2.00
Contractors
Supply
9/32 (1/4)
3/8
1/2
5/8
3/4
7/8
Stock No.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Hook Size
(in)
Carbon
Wire
Rope
1.
2.
3.
423
7/3/13 9:41 AM
WARNING
Universal
Latch Kits
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Size of
Latch
Neck
Diameter
N
(in.)
Throat Opening
of Hook
T
(in.)
A
B
C
D
E
F
G
H
J
K
L
M
O
9/16" to 5/8"
3/4" to 1-3/16"
7/8" to 1"
1-1/8" to 1-1/4"
1-3/8" to 1-1/2"
1-5/8" to 1-11/16"
1-3/4" to 1-13/16"
1-7/8" to 2"
2-1/16" to 2-1/8"
2-3/16" to 2-1/4"
2-5/16" to 2-3/8"
2-7/16" to 2-3/4"
3" to 3-1/4"
1-1/16" to 1-1/8"
1-1/4"
1-3/8" to 1-1/2"
1-3/4" to 1-7/8"
2-1/16"
2-1/4"
2-1/2"
3"
3-3/8"
3-1/2"
3-3/4"
4"
4-1/2"
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
424
7/3/13 9:41 AM
Overhead
Cranes / Jibs
HG-223 Hook & Hook
Turnbuckles
Hardware
Slings
Engineered
Products
Services
End fittings are Quenched and Tempered or
Normalized, bodies heat treated by normalizing.
Hooks are forged with a greater cross sectional
area that results in a stronger hook with better
fatigue properties.
Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor,
proof load and temperature requirements. Importantly, these turnbuckles meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by
ASME B30.26.
TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
Modified UNJ thread on end fittings for improved
fatigue properties.
Body has UNC threads.
Lock Nuts available for all sizes.
Fatigue Rated.
Stock
No.
Working
Load
Limit
Weight
Each
in.
HG-223
lbs. *
lbs.
A
D
E
Closed
F
J
Open
K
Closed
M
Open
N
Closed
BB
† 1/4 x 4
† 5/16 x 4-1/2
† 3/8 x 6
1/2 x 6
1/2 x 12
5/8 x 6
5/8 x 12
3/4 x 6
3/4 x 12
3/4 x 18
7/8 x 12
1 x 12
1030011
1030039
1030057
1030075
1030119
1030137
1030173
1030191
1030235
1030253
1030271
1030333
400
700
1,000
1,500
1,500
2,250
2,250
3,000
3,000
3,000
4,000
5,000
.33
.52
.83
1.88
2.77
3.21
4.58
4.20
6.92
8.65
9.85
14.8
.25
.31
.38
.50
.50
.63
.63
.75
.75
.75
.88
1.00
.44
.50
.56
.65
.65
.90
.90
.98
.98
.98
1.13
1.25
1.67
2.00
2.28
3.53
3.51
4.24
4.23
5.07
5.04
5.07
5.82
6.56
1.27
1.50
1.77
2.28
2.28
2.81
2.81
3.33
3.33
3.33
3.78
4.25
9.79
11.58
15.23
17.98
30.27
19.50
31.84
21.19
33.59
45.59
34.89
36.59
7.38
8.58
10.62
13.20
19.49
14.50
20.84
15.98
22.38
28.38
23.52
25.06
12.20
14.08
17.84
20.76
33.05
22.50
34.84
24.40
36.80
48.80
38.26
40.12
8.20
9.58
11.84
14.76
21.05
16.50
22.84
18.40
24.80
30.80
26.26
28.12
4.07
4.58
6.10
6.03
12.36
6.03
12.39
6.13
12.59
18.53
12.16
12.18
Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
Mechanical Galvanized
Wire
Rope
Cordage
Dimensions
(in.)
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
*
†
Lifting
Products
Thread
Dia. &
Take Up
Load
Securement
■
■
■
■
■
■
■
■
■
Hoists
Meets the performance requirements of Federal
Specifications FF-T-791b, Type 1 Form 1 — CLASS 5,
and ASTM F-1145, except for those provisions
425
7/3/13 9:41 AM
HG-225 Hook & Eye
Turnbuckles
Specifications FF-T-791b, Type 1, Form 1 — CLASS 6,
and ASTM F-1145, except for those provisions required
of the contractor.
■
■
■
■
■
■
■
End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4" through
1", a shackle one size smaller can be reeved
through eye.
Turnbuckle hooks are forged with a greater cross
sectional area that results in a stronger hook with better fatigue properties.
Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, these turnbuckles meet other critical performance
ASME B30.26.
Modified UNJ thread on end fittings for improved
fatigue properties.
Thread
Dia. &
Take Up
Stock
No.
Working
Load
Limit
Weight
Each
in.
HG-225
lbs. *
lbs.
A
D
† 1/4 x 4
† 5/16 x 4-1/2
† 3/8 x 6
1/2 x 6
1/2 x 12
5/8 x 6
5/8 x 12
3/4 x 6
3/4 x 12
3/4 x 18
7/8 x 12
1 x 12
1030636
1030654
1030672
1030690
1030734
1030752
1030798
1030814
1030850
1030878
1030896
1030958
400
700
1,000
1,500
1,500
2,250
2,250
3,000
3,000
3,000
4,000
5,000
.31
.50
.79
1.80
2.70
2.98
4.35
4.21
6.52
8.24
9.34
13.9
.25
.31
.38
.50
.50
.63
.63
.75
.75
.75
.88
1.00
.44
.50
.56
.65
.65
.90
.90
.98
.98
.98
1.13
1.25
*
†
■
■
■
Fatigue Rated.
Dimensions
(in.)
E
Closed
1.67
2.00
2.28
3.53
3.51
4.24
4.23
5.07
5.04
5.07
5.82
6.56
F
1.27
1.50
1.76
2.28
2.28
2.81
2.81
3.33
3.33
3.33
3.78
4.25
J
K
M
N
Open
Closed
Open
Closed
11.66
13.50
17.09
19.57
31.86
21.11
33.45
22.61
35.01
47.01
36.11
37.65
7.66
9.00
11.09
13.57
19.86
15.11
21.45
16.61
23.01
29.01
24.11
25.65
12.29
14.28
18.04
20.79
33.08
22.61
34.95
24.45
36.85
48.85
38.23
40.06
8.29
9.78
12.04
14.79
21.08
16.61
22.95
18.45
24.85
30.85
26.23
28.06
R
S
.81
.95
1.13
1.41
1.41
1.80
1.80
2.09
2.09
2.09
2.38
3.00
.34
.44
.53
.71
.71
.88
.88
1.00
1.00
1.00
1.25
1.43
X
Closed
1.76
2.20
2.48
3.56
3.54
4.35
4.34
5.12
5.09
5.12
5.79
6.50
BB
4.07
4.58
6.10
6.03
12.36
6.03
12.39
6.13
12.59
18.53
12.16
12.18
Mechanical Galvanized
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
426
7/3/13 9:41 AM
Overhead
Cranes / Jibs
HG-226 Eye & Eye
Turnbuckles
in.
HG-226
lbs. *
lbs.
A
J
Open
K
Closed
M
Open
N
Closed
R
S
† 1/4 x 4
† 5/16 x 4-1/2
† 3/8 x 6
1/2 x 6
1/2 x 12
5/8 x 6
5/8 x 12
3/4 x 6
3/4 x 12
3/4 x 18
7/8 x 12
7/8 x 18
1x6
1 x 12
1 x 18
1 x 24
1-1/4 x 12
1-1/4 x 18
1-1/4 x 24
1-1/2 x 12
1-1/2 x 18
1-1/2 x 24
1-3/4 x 18
1-3/4 x 24
2 x 24
2-1/2 x 24
2-3/4 x 24
1031252
1031270
1031298
1031314
1031350
1031378
1031412
1031430
1031476
1031494
1031519
1031537
1031555
1031573
1031591
1031617
1031635
1031653
1031671
1031699
1031715
1031733
1031779
1031797
1031813
1031831
1031859
500
800
1,200
2,200
2,200
3,500
3,500
5,200
5,200
5,200
7,200
7,200
10,000
10,000
10,000
10,000
15,200
15,200
15,200
21,400
21,400
21,400
28,000
28,000
37,000
60,000
75,000
.29
.48
.75
1.72
2.63
2.75
4.12
4.22
6.12
7.83
8.83
11.5
9.62
13.0
16.3
20.2
19.9
23.8
27.8
28.7
34.1
39.6
50.7
58.2
83.5
149
174
.25
.31
.38
.50
.50
.63
.63
.75
.75
.75
.88
.88
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.50
1.50
1.50
1.75
1.75
2.00
2.50
2.75
11.94
13.92
17.56
19.94
32.23
21.72
34.06
23.24
35.64
47.64
36.70
49.17
26.24
38.24
50.24
62.84
42.14
54.14
66.70
44.24
56.24
68.86
57.38
69.38
75.68
79.18
81.34
7.94
9.42
11.56
13.94
20.23
15.72
22.06
17.24
23.64
29.64
24.70
31.17
20.24
26.24
32.24
38.84
30.14
36.14
42.70
32.24
38.24
44.86
39.38
45.38
51.68
55.18
57.34
12.38
14.48
18.24
20.82
33.11
22.72
35.06
24.50
36.90
48.90
38.20
50.67
28.00
40.00
52.00
64.60
44.38
56.38
68.94
46.74
58.74
71.36
60.38
72.38
79.18
83.18
85.84
8.38
9.98
12.24
14.82
21.11
16.72
23.06
18.50
24.90
30.90
26.20
32.67
22.00
28.00
34.00
40.60
32.38
38.38
44.94
34.74
40.74
47.36
42.38
48.38
55.18
59.18
61.84
.81
.95
1.13
1.41
1.41
1.80
1.80
2.09
2.09
2.09
2.38
2.38
3.00
3.00
3.00
3.00
3.59
3.59
3.59
4.09
4.09
4.09
4.65
4.65
5.81
6.49
7.00
.34
.44
.53
.71
.71
.88
.88
1.00
1.00
1.00
1.25
1.25
1.43
1.43
1.43
1.43
1.82
1.82
1.82
2.12
2.12
2.12
2.38
2.38
2.69
3.12
3.25
*
Dimensions
(in.)
X
Closed
1.76
2.20
2.48
3.56
3.54
4.35
4.34
5.12
5.09
5.12
5.79
5.79
6.50
6.50
6.50
6.47
8.49
8.49
8.49
9.46
9.46
9.46
9.97
9.97
13.03
13.76
15.09
BB
4.07
4.58
6.10
6.03
12.36
6.03
12.39
6.13
12.59
18.53
12.16
18.63
6.18
12.18
18.18
24.84
12.06
18.06
24.62
12.32
18.32
24.94
18.37
24.37
24.48
24.60
24.65
† Mechanical Galvanized
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Hardware
Weight
Each
Lifting
Products
Working
Load
Limit
Wire
Rope
Stock
No.
Cordage
Thread
Dia. &
Take Up
Load
Securement
Fatigue Rated.
Contractors
Supply
■
■
■
Slings
Engineered
Products
Services
Turnbuckle eyes are forged elongated, by design,
to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4" through 2-1/2", a shackle one size smaller can be reeved through eye.
Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads.
Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, these turnbuckles meet other critical performance
ASME B30.26.
Fall
Protection
■
■
■
■
■
Hoists
Specifications FF-T-791b, Type 1, Form 1 — CLASS 4,
and ASTM F-1145, except for those provisions
427
7/3/13 9:41 AM
HG-227 Jaw & Eye
Turnbuckles
Meets the performance requirements of Federal Specifications
FF-T-791b, Type 1, Form 1 — CLASS 8, and ASTM F-1145, except
for those provisions required of the contractor.
■
■
■
■
■
■
■
■
Turnbuckles eyes are forged and elongated, by design, to maximize easy attachment in system and minimize stress in the eye.
For turnbuckles size 1/4" through 2-1/2", a shackle one size smaller can be reeved through eye.
Forged jaw ends are fitted with bolts and nuts for 1/4" through 5/8", and pins and cotters on 3/4" through 2-3/4" sizes.
Modified UNJ thread on end fittings for improved fatigue properties.
Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, these turnbuckles meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
TURNBUCKLES RECOMMENDED FOR STRAIGHT OR
IN-LINE PULL ONLY.
■
■
Fatigue Rated.
Thread
Dia. &
Take Up
Stock
No.
Working
Load
Limit
Weight
Each
in.
HG-227
lbs. *
lbs.
A
B
E
Closed
G
J
Open
K
Closed
M
Open
N
Closed
R
S
† 1/4 x 4
† 5/16 x 4-1/2
† 3/8 x 6
1/2 x 6
1/2 x 9
1/2 x 12
5/8 x 6
5/8 x 9
5/8 x 12
3/4 x 6
3/4 x 9
3/4 x 12
3/4 x 18
7/8 x 12
7/8 x 18
1x6
1 x 12
1 x 18
1 x 24
1-1/4 x 12
1-1/4 x 18
1-1/4 x 24
1-1/2 x 12
1-1/2 x 18
1-1/2 x 24
1-3/4 x 18
1-3/4 x 24
2 x 24
2-1/2 x 24
2-3/4 x 24
1031877
1031895
1031911
1031939
1031957
1031975
1031993
1032019
1032037
1032055
1032073
1032091
1032117
1032135
1032153
1032171
1032199
1032215
1032233
1032251
1032279
1032297
1032313
1032331
1032359
1032395
1032411
1032439
1032457
1032475
500
800
1,200
2,200
2,200
2,200
3,500
3,500
3,500
5,200
5,200
5,200
5,200
7,200
7,200
10,000
10,000
10,000
10,000
15,200
15,200
15,200
21,400
21,400
21,400
28,000
28,000
37,000
60,000
75,000
.33
.52
.80
1.77
2.25
2.67
2.98
3.72
4.35
4.51
5.56
6.42
8.14
9.10
11.6
10.0
13.4
16.7
20.6
20.9
24.8
28.8
30.6
36.0
41.5
52.1
59.7
89.9
158
187
.25
.31
.38
.50
.50
.50
.63
.63
.63
.75
.75
.75
.75
.88
.88
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.50
1.50
1.50
1.75
1.75
2.00
2.50
2.75
.45
.50
.53
.64
.64
.64
.79
.79
.79
.97
.97
.97
.97
1.16
1.16
1.34
1.34
1.34
1.34
1.84
1.84
1.84
2.06
2.06
2.06
2.60
2.60
2.62
3.06
3.69
1.66
2.02
2.11
3.22
3.20
3.20
3.90
3.89
3.89
4.71
4.68
4.68
4.71
5.50
5.50
6.09
6.09
6.09
6.06
8.09
8.09
8.09
8.93
8.93
8.93
9.36
9.36
11.80
13.26
14.92
.64
.87
.85
1.07
1.07
1.07
1.32
1.32
1.32
1.52
1.52
1.52
1.52
1.77
1.77
2.05
2.05
2.05
2.05
2.82
2.82
2.82
2.81
2.81
2.81
3.35
3.35
3.74
4.44
4.19
11.57
13.50
16.91
19.30
25.59
31.59
20.73
27.07
33.07
22.17
28.57
34.57
46.57
35.68
48.15
25.03
37.03
49.03
61.63
40.76
52.76
65.32
42.50
54.50
67.12
55.37
67.37
72.66
76.08
78.05
7.57
9.00
10.91
13.30
16.59
19.59
14.73
18.07
21.07
16.17
19.57
22.57
28.57
23.68
30.15
19.03
25.03
31.03
37.63
28.76
34.76
41.32
30.50
36.50
43.12
37.37
43.37
48.66
52.08
54.05
12.28
14.30
17.87
20.48
26.77
32.77
22.27
28.61
34.61
24.09
30.49
36.49
48.49
37.91
50.38
27.59
39.59
51.59
64.19
43.98
55.98
68.54
46.21
58.21
70.83
59.77
71.77
77.95
82.68
85.67
8.28
9.80
11.87
14.48
17.77
20.77
16.27
19.61
22.61
18.09
21.49
24.49
30.49
25.91
32.38
21.59
27.59
33.59
40.19
31.98
37.98
44.54
34.21
40.21
46.83
41.77
47.77
53.95
58.68
61.67
.81
.95
1.13
1.41
1.41
1.41
1.80
1.80
1.80
2.09
2.09
2.09
2.09
2.38
2.38
3.00
3.00
3.00
3.00
3.59
3.59
3.59
4.09
4.09
4.09
4.65
4.65
5.81
6.49
7.00
.34
.44
.53
.71
.71
.71
.88
.88
.88
1.00
1.00
1.00
1.00
1.25
1.25
1.43
1.43
1.43
1.43
1.82
1.82
1.82
2.12
2.12
2.12
2.38
2.38
2.69
3.12
3.25
*
Dimensions
(in.)
X
BB
Closed
1.76
2.20
2.48
3.56
3.54
3.54
4.35
4.34
4.34
5.12
5.09
5.09
5.12
5.79
5.79
6.50
6.50
6.50
6.47
8.49
8.49
8.49
9.46
9.46
9.46
9.97
9.97
13.03
13.76
15.09
4.07
4.58
6.10
6.03
9.36
12.36
6.03
9.39
12.39
6.13
9.59
12.59
18.53
12.16
18.63
6.18
12.18
18.18
24.84
12.06
18.06
24.62
12.32
18.32
24.94
18.37
24.37
24.48
24.60
24.65
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
428
7/3/13 9:41 AM
Overhead
Cranes / Jibs
HG-228 Jaw & Jaw
Turnbuckles
HG-228
lbs. *
lbs.
A
B
E
Closed
G
J
Open
K
Closed
M
Open
N
Closed
BB
† 1/4 x 4
† 5/16 x 4-1/2
† 3/8 x 6
1/2 x 6
1/2 x 9
1/2 x 12
5/8 x 6
5/8 x 9
5/8 x 12
3/4 x 6
3/4 x 9
3/4 x 12
3/4 x 18
7/8 x 12
7/8 x 18
1x6
1 x 12
1 x 18
1 x 24
1-1/4 x 12
1-1/4 x 18
1-1/4 x 24
1-1/2 x 12
1-1/2 x 18
1-1/2 x 24
1-3/4 x 18
1-3/4 x 24
2 x 24
2-1/2 x 24
2-3/4 x 24
1032493
1032518
1032536
1032554
1032572
1032590
1032616
1032634
1032652
1032670
1032698
1032714
1032732
1032750
1032778
1032796
1032812
1032830
1032858
1032876
1032894
1032910
1032938
1032956
1032974
1033018
1033036
1033054
1033072
1033090
500
800
1,200
2,200
2,200
2,200
3,500
3,500
3,500
5,200
5,200
5,200
5,200
7,200
7,200
10,000
10,000
10,000
10,000
15,200
15,200
15,200
21,400
21,400
21,400
28,000
28,000
37,000
60,000
75,000
.37
.56
.85
1.82
2.29
2.71
3.21
3.95
4.58
4.80
5.85
6.72
8.45
9.37
11.8
10.4
13.8
17.1
21.0
21.9
25.9
29.8
32.6
38.0
43.5
53.5
61.1
96.3
167
199
.25
.31
.38
.50
.50
.50
.63
.63
.63
.75
.75
.75
.75
.88
.88
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.50
1.50
1.50
1.75
1.75
2.00
2.50
2.75
.45
.50
.53
.64
.64
.64
.79
.79
.79
.97
.97
.97
.97
1.16
1.16
1.34
1.34
1.34
1.34
1.84
1.84
1.84
2.06
2.06
2.06
2.60
2.60
2.62
3.06
3.69
1.66
2.02
2.11
3.22
3.20
3.20
3.90
3.89
3.89
4.71
4.68
4.68
4.71
5.50
5.50
6.09
6.09
6.09
6.06
8.09
8.09
8.09
8.93
8.93
8.93
9.36
9.36
11.80
13.26
14.92
.64
.87
.85
1.07
1.07
1.07
1.32
1.32
1.32
1.52
1.52
1.52
1.52
1.77
1.77
2.05
2.05
2.05
2.05
2.82
2.82
2.82
2.81
2.81
2.81
3.35
3.35
3.74
4.44
4.19
11.19
13.07
16.25
18.65
24.94
30.94
19.74
26.08
32.08
21.09
27.49
33.49
45.49
34.65
47.12
23.82
35.82
47.82
60.42
39.37
51.37
63.93
40.76
52.76
65.38
53.35
65.35
69.64
72.97
74.75
7.19
8.57
10.25
12.65
15.94
18.94
13.74
17.08
20.08
15.09
18.49
21.49
27.49
22.65
29.12
17.82
23.82
29.82
36.42
27.37
33.37
39.93
28.76
34.76
41.38
35.35
41.35
45.64
48.97
50.75
12.18
14.12
17.50
20.14
26.43
32.43
21.82
28.16
34.16
23.68
30.08
36.08
48.08
37.62
50.09
27.18
39.18
51.18
63.78
43.58
55.58
68.14
45.68
57.68
70.30
59.16
71.16
76.72
82.18
85.50
8.18
9.62
11.50
14.14
17.43
20.43
15.82
19.16
22.16
17.68
21.08
24.08
30.08
25.62
32.09
21.18
27.18
33.18
39.78
31.58
37.58
44.14
33.68
39.68
46.30
41.16
47.16
52.72
58.18
61.50
4.07
4.58
6.10
6.03
9.36
12.36
6.03
9.39
12.39
6.13
9.59
12.59
18.53
12.16
18.63
6.18
12.18
18.18
24.84
12.06
18.06
24.62
12.32
18.32
24.94
18.37
24.37
24.48
24.60
24.65
*
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Lifting
Products
in.
Dimensions
(in.)
Wire
Rope
Weight
Each
Cordage
Working
Load
Limit
Load
Securement
Stock
No.
Contractors
Supply
Thread
Dia. &
Take Up
Hardware
Slings
Engineered
Products
Services
Forged jaw ends are fitted with bolts and nuts for 1/4" through 5/8", and pins and cotters on 3/4" through 2-3/4" sizes.
Modified UNJ thread on end fittings for improved fatigue properties.
Meets or exceeds all requirements of ASME B30.26, including
identification, ductility, design factor, proof load and temperature requirements. Importantly, these turnbuckles meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Fatigue Rated.
Fall
Protection
■
■
■
■
■
■
■
■
■
Hoists
Meets the performance requirements of Federal Specifications
FF-T-791b,Type 1, Form 1 — CLASS 7, and ASTM F-1145, except
for those provisions required of the contractor.
429
7/3/13 9:41 AM
Turnbuckle Data
Hook—
Dimensions &
Strength
A
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
B
Hook—Dimensions (in.)
C
13/32
1/2
39/64
25/32
1
1-13/64
1-3/8
1-17/32
1-13/16
1-3/4
B
Eye—Dimensions (in.)
C
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-5/16
Working Load
Limit (lbs.)
29/64
1/2
9/16
21/32
27/32
63/64
1-1/8
1-1/4
1-1/2
1-7/8
E
1-21/32
1-31/32
2-23/64
2-15/16
3-11/16
4-33/64
5-3/16
5-27/32
7-7/32
8-11/32
400
700
1,000
1,500
2,250
3,000
4,000
5,000
5,000
7,500
D
E
Working Load
Limit (lbs.)
D
Eye—
Dimensions &
Strength
A
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
2-3/4
11/32
7/16
17/32
23/32
7/8
1
1-1/4
1-7/16
1-13/16
2-1/8
2-3/8
2-11/16
3-1/8
3-1/4
7/32
9/32
11/32
7/16
1/2
5/8
3/4
7/8
1-1/8
1-1/4
1-1/2
1-3/4
2
2-1/4
25/32
15/16
1-1/8
1-7/16
1-3/4
2-1/8
2-3/8
3
3-9/16
4-1/8
4-11/16
5-3/4
6-1/2
7
1-25/32
2-3/16
2-9/16
3-7/32
3-7/8
4-11/16
5-1/4
6-3/8
7-3/4
8-5/8
10
12-1/8
13-9/16
15
500
800
1,200
2,200
3,500
5,200
7,200
10,000
15,200
21,400
28,000
37,000
60,000
75,000
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
430
7/3/13 9:41 AM
Overhead
Cranes / Jibs
Turnbuckle Data
(Continued)
9/32
9/32
5/16
13/32
1/2
9/16
11/16
25/32
1
1-1/16
1-1/4
1-9/16
1-9/16
1-5/8
1/2
1/2
19/32
3/4
1-1/32
1-9/32
1-15/32
1-21/32
2-3/32
2-15/32
2-29/32
3-17/32
4-5/8
5-3/8
G
1-5/8
2
2-3/16
2-3/4
3-1/2
4-1/8
4-27/32
5-17/32
7-3/16
7-7/8
9-3/8
10-7/8
13-11/32
15
Working Load
Limit (lbs.)
500
800
1,200
2,200
3,500
5,200
7,200
10,000
15,200
21,400
28,000
37,000
60,000
75,000
A
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
2
2-3/4
Body—Dimensions (in.)
B
S
4
4-1/2
6
6
6
6
6
6
12
18
24
12
18
12
18
18
24
24
4-3/4
5-7/16
7-1/8
7-1/2
7-7/8
8-1/4
8-5/8
9
15
21
27
15-1/8
21-1/8
15-3/4
21-3/4
22-3/8
29
31
T
3/8
15/32
9/16
3/4
15/16
1-1/8
1-5/16
1-1/2
1-1/2
1-1/2
1-1/2
1-9/16
1-9/16
1-7/8
1-7/8
2-3/16
2-1/2
3-1/2
Working Load
Limit (lbs.)
500
800
1,200
2,200
3,500
5,200
7,200
10,000
10,000
10,000
10,000
15,200
15,200
21,400
21,400
28,000
37,000
75,000
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Wire
Rope
Lifting
Products
Body—
Dimensions &
Strength
Slings
13/32
15/32
1/2
5/8
3/4
15/16
1-1/8
1-3/16
1-3/4
2-1/16
2-3/8
2-1/2
2-7/8
3-1/2
F
Hardware
1/4
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1-1/8
1-3/8
1-5/8
2
2-1/4
2-3/4
E
Cordage
5/8
7/8
7/8
1-1/16
1-5/16
1-1/2
1-3/4
2-1/16
2-13/16
2-13/16
3-3/8
3-11/16
4-7/16
4-3/16
Jaw—Dimensions (in.)
D
Load
Securement
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
2-3/4
C
Contractors
Supply
B
Fall
Protection
A
Engineered
Products
Services
Hoists
Jaw—
Dimensions &
Strength
431
7/3/13 9:41 AM
WARNING
VRS
STARPOINT Eye Bolt
ON PAGES 454 - 461.
The Absolute STAR Among Eye Bolts
hape: Star shaped - clear distinction from standard
S
eye bolt DIN 580.
Color:
Striking fluorescent pink powder coating
Marking: Clear indication of WLL (in metric tons and lbs.) for
side load direction F (not allowed with standard eye bolt).
■
Forged material 1.6541, alloy quenched and tempered,
100% electromagnetic crack detected according to EN 1677-4
■
Safety factor 4:1.
■
Workpiece material must conform to minimum steel quality
S235JR (1.0037).
■
Countersink of tapped hole = nominal thread diameter.
■
Provide plane seat of the special hexagon bolt.
■
VRS must be able to rotate by 360° in bolted condition.
■
Adjust to load direction before loading.
■
Component protected by patents:
-
Europe patent EP 654 611.
-
US patent 5690457.
Specifically engineered Grade 10.9 captive hexagon socket screw.
Simply engage the hexagon socket bolt with the star profile key –
use your fingers to respectively tighten or untighten the arrangement.
Disengage the key before you hook in the lifting mean. Do not use
an elongation piece.
Type
WLL
(lbs.)
Weight
(lbs.)
A
B
C
D
E
G
K
L
M
N
Quantity
Per Box
S
Ref. No.
VRS-F
VRS-1/4"-20UNC
220 (1,100)
0.13
1-5/64
23/64
17/64
25/32
29/32
1-7/64
1-29/64
23/64
1/4
7/32
33/64
4
7999105
VRS-5/16"-18UNC
660 (2,090)
0.25
1-11/32
7/16
11/32
1
1
1-19/64
1-13/16
15/32
5/16
1/4
41/64
1
7999106
VRS-3/8"-16UNC
880 (2,200)
0.26
1-11/32
7/16
11/32
1
1
1-19/64
1-13/16
9/16
3/8
1/4
9/16
20
7104480
VRS-7/16"-14UNC
880 (2,200)
0.26
1-11/32
7/16
21/64
11/32
1
1-19/64
1-13/16
19/32
7/16
1/4
41/64
4
7999272
VRS-1/2"-13UNC
1,650 (4,400)
0.45
1-21/32
1/2
11/32
1-3/16
1-3/16
1-11/32
2-3/16
3/4
1/2
5/16
23/64
20
7104481
VRS-5/8"-11UNC
3,300 (8,820)
0.75
1-15/16
19/32
9/16
1-3/8
1-3/8
1-9/16
2-9/16
15/16
5/8
3/8
7/8
10
7104482
VRS-3/4"-10UNC
5,070 (13,250)
1.2
2-1/4
21/32
5/8
1-9/16
1-9/16
2
2-15/16
1-3/16
3/4
1/2
1-3/32
10
7104483
VRS-7/8"-9UNC
5,070 (13,250)
1.3
2-1/4
21/32
5/8
1-9/16
1-9/16
2
2-15/16
1-5/32
7/8
1/2
1-3/32
10
7104484
VRS-1"-8UNC
7,050 (17,630)
2.2
2-23/32
13/16
3/4
1-7/8
1-7/8
2-3/8
3-17/32
1-1/2
1
9/16
1-5/16
10
7104485
VRS-1-1/4"-7UNC
9,920 (26,450)
4.2
3-3/8
1
15/16
2-3/8
2-3/8
2-15/16
4-13/32
1-7/8
1-1/4
5/8
1-21/32
4
7104486
VRS-1-1/2"-6UNC
15,430 (35,270)
7.6
4
1-1/4
1-1/8
2-27/32
2-15/16
3-17/32
5-5/16
2-1/8
1-1/2
7/8
1-31/32
1
7984221
VRS-1-3/4"-5UNC
19,480 (52,910)
11.6
4-3/4
1-1/2
1-11/32
3-7/32
3-11/32
4-1/8
6-1/4
2-1/2
1-3/4
1
2-9/32
2
7104488
VRS-2"-4.5UNC
26,450 (70,540)
17.5
5-3/8
1-11/16
1-1/2
3-11/16
3-15/16
4-3/4
7-1/16
2-13/16
2
1-1/8
2-19/32
1
7984223
Attention: Lateral forces with standard eye bolts according to DIN 580 are forbidden! In case of multiple leg suspensions, 2-leg and 3/4-legs,
the ring-eye plane of the ring bolt must be in the direction of pull. This is not likely to be the case if standard eye bolts are tightened.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
432
7/3/13 9:41 AM
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Hoists
Drop forged steel. Heat treated after forging.
Self-colored, zinc plated or hot galvanized. Plain or
shoulder type, blank or threaded. Threaded will be
supplied unless otherwise specified.
Overhead
Cranes / Jibs
WARNING
Forged Eye Bolts
Part
No.
Weight
Per
100
1
2
3
4
5
6
7
8
9
10
11
12
14
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
11005-1
11025-9
11045-7
11065-5
11085-3
11105-8
11125-6
11148-5
11168-3
11188-1
11208-6
11231-4
11251-2
5.5
11.5
16.5
22
35
45
66
97
142
199
312
412
691
Engineered
Products
Standard
Shank
Length
(in.)
Slings
Bolt
Diameter
N.C.
(in.)
Hardware
Plain
Pattern
No.
Services
Standard Shank Lengths—
Plain Pattern
Weight
Per
100
21
22
23
24
25
26
27
28
29
30
31
32
34
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
12805-6
12825-4
12845-2
12865-0
12885-8
12905-3
12925-1
12948-0
12968-8
12988-6
13008-0
13031-8
13051-6
6
10
16
26.5
38
49
73.5
99.5
172.5
235
342.5
462.5
752.5
Wire
Rope
Part
No.
Cordage
Standard
Shank
Length
(in.)
Load
Securement
Bolt
Diameter
N.C.
(in.)
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
Shoulder
Pattern
No.
Lifting
Products
Standard Shank Lengths—
Shoulder Pattern
433
7/3/13 9:41 AM
WARNING
Metric Eye Bolts
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Forged, Carbon Steel,
Self-colored, Shoulder Pattern
Part
No.
Metric
Size
Approx.
Equivalent
(in.)
13805-5
13825-3
13845-1
13865-9
13885-7
13905-2
13925-0
13948-9
13968-7
13988-5
14008-9
14031-7
14051-5
M6
M7
M8
M10
M12
M14
M16
M18
M20
M24
M27
M30
M36
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
Thread
Size
A
Shank
Length
B
(mm)
I.D.
Eye
C
(mm)
Approx.
Weight
Per 100
Pcs.
(lbs.)
Working
Load Limit
(kgs.)
Working
Load Limit
(lbs.)
M6 x 1.0
M7 x 1.0
M8 x 1.25
M10 x 1.5
M12 x 1.75
M14 x 2.0
M16 x 2.0
M18 x 2.5
M20 x 2.5
M24 x 3.0
M27 x 3.0
M30 x 3.5
M36 x 4.0
25.4
28.5
31.7
35
38
44.5
44.5
51
57
63.5
70
76
89
19
22
25
28
30
35
35
38
43
46
51
55
63
6
10
16
21
38
73
73
104
161
231
335
439
731
210
370
450
740
1,030
1,600
1,600
2,140
2,860
3,850
5,200
6,400
8,970
462
814
992
1,628
2,266
3,520
3,520
4,708
6,292
8,470
11,440
14,080
19,734
Some sizes available in stainless steel.
Stainless Steel Eye Bolts
Machinery Eye Bolts Plain Pattern—Threaded Type 316 Stainless Steel
Plain
Pattern No.
Bolt
Diameter
(in.)
Standard
Shank
(in.)
Part
No.
Weight
Per 100
(lbs.)
1SS
2SS
3SS
5SS
7SS
8SS
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/8
1-1/4
1/23/8
1-3/4
2
14205-2
14210-6
14215-1
14220-5
14225-0
14230-4
5
10.5
15.5
33
64
90.5
Machinery Eye Bolts Shoulder Pattern—Threaded Type 316 Stainless Steel
Shoulder
Pattern No.
Bolt
Diameter
(in.)
Standard
Shank
(in.)
Part
No.
Weight
Per 100
(lbs.)
21SS
22SS
23SS
25SS
27SS
28SS
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/8
1-1/4
1/23/8
1-3/4
2
13105-6
13125-4
13145-2
13185-8
13225-1
13248-0
6
10
16
38
73.5
99.5
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
434
7/3/13 9:41 AM
*
Services
Engineered
Products
B
C
D
E
F
G
H
.50
.50
.62
.62
.75
.75
.75
1.00
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.50
1.75
1.75
1.75
2.00
2.00
2.00
2.00
2.50
2.50
2.50
1.00
1.00
1.25
1.25
1.50
1.50
1.50
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
3.00
3.00
3.00
3.00
3.00
3.00
3.50
3.50
3.50
4.00
4.00
4.00
4.00
5.00
5.00
5.00
.25
.25
.31
.31
.38
.38
.38
.50
.50
.50
.50
.50
.62
.62
.62
.62
.62
.75
.75
.75
.75
.75
.75
.88
.88
.88
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.50
2.50
1.50
2.50
1.50
2.50
2.50
1.50
3.00
3.00
3.00
3.00
2.00
3.00
3.00
3.00
4.00
2.00
3.00
3.00
3.00
4.00
5.00
2.50
4.00
4.00
3.00
4.00
4.00
7.00
4.00
4.00
6.00
2.00
4.00
2.25
4.25
2.50
4.50
6.00
3.25
6.00
8.00
10.00
12.00
4.00
6.00
8.00
10.00
12.00
4.50
6.00
8.00
10.00
12.00
15.00
5.00
8.00
12.00
6.00
9.00
12.00
18.00
8.00
12.00
20.00
3.06
5.06
3.56
5.56
4.12
6.12
7.62
5.38
8.12
10.12
12.12
14.12
6.69
8.69
10.69
12.69
14.69
7.69
9.19
11.19
13.19
15.19
18.19
8.75
11.75
15.75
10.31
13.31
16.31
22.31
13.38
17.38
25.38
.56
.56
.69
.69
.88
.88
.88
1.12
1.12
1.12
1.12
1.12
1.44
1.44
1.44
1.44
1.44
1.69
1.69
1.69
1.69
1.69
1.69
2.00
2.00
2.00
2.31
2.31
2.31
2.31
2.88
2.88
2.88
Ultimate Load is 5 times the Working Load Limit. Working Load Limit shown is for in-line pull.
Maximum Proof Load is 2 times the Working Load Limit.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Slings
A
.25
.25
.31
.31
.38
.38
.38
.50
.50
.50
.50
.50
.62
.62
.62
.62
.62
.75
.75
.75
.75
.75
.75
.88
.88
.88
1.00
1.00
1.00
1.00
1.25
1.25
1.25
Hardware
8.20
11.70
13.30
25.00
23.30
29.50
35.20
50.30
66.10
82.00
88.00
114.20
103.10
118.20
135.10
153.60
167.10
168.60
184.50
207.90
235.00
257.50
298.00
270.00
308.00
400.00
421.00
468.50
540.00
650.00
750.00
900.00
1210.00
Lifting
Products
650
650
1,200
1,200
1,550
1,550
1,550
2,600
2,600
2,600
2,600
2,600
5,200
5,200
5,200
5,200
5,200
7,200
7,200
7,200
7,200
7,200
7,200
10,600
10,600
10,600
13,300
13,300
13,300
13,300
21,000
21,000
21,000
Dimensions
(in.)
Wire
Rope
Weight
Per 100
(lbs.)
Cordage
G-291
1043230
1043258
1043276
1043294
1043310
1043338
1043356
1043374
1043392
1043418
1043436
1043454
1043472
1043490
1043515
1043533
1043551
1043579
1043597
1043613
1043631
1043659
1043677
1043695
1043711
1043739
1043757
1043775
1043793
1043819
1043837
1043855
1043873
Working
Load
Limit
(lbs.) *
Load
Securement
1/4 x 2
1/4 x 4
5/16 x 2-1/4
5/16 x 4-1/4
3/8 x 2-1/2
3/8 x 4-1/2
3/8 x 6
1/2 x 3-1/4
1/2 x 6
1/2 x 8
1/2 x 10
1/2 x 12
5/8 x 4
5/8 x 6
5/8 x 8
5/8 x 10
5/8 x 12
3/4 x 4-1/2
3/4 x 6
3/4 x 8
3/4 x 10
3/4 x 12
3/4 x 15
7/8 x 5
7/8 x 8
7/8 x 12
1x6
1x9
1 x 12
1 x 18
1-1/4 x 8
1-1/4 x 12
1-1/4 x 20
Stock
No.
Contractors
Supply
Shank
Dia. &
Length
(in.)
Hoists
at 20,000 cycles.
All Bolts Hot Dip galvanized after threading (UNC).
Furnished with standard Hot Dip galvanized hex nuts.
Recommended for in-line pull.
Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, these bolts meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Fall
Protection
■
■
■
■
■
■
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Overhead
Cranes / Jibs
WARNING
G-291 Regular
Nut Eye Bolts
435
7/3/13 9:41 AM
WARNING
G-277 Shoulder
Nut Eye Bolts
■
■
■
■
■
■
at 20,000 cycles.
Working Load Limits shown are for in-line pull.
Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, these bolts meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
All Bolts Hot Dip galvanized after threading (UNC).
Furnished with standard Hot Dip galvanized,
heavy hex nuts.
Shank
Dia. &
Length
(in.)
1/4 x 2
1/4 x 4
5/16 x 2-1/4
5/16 x 4-1/4
3/8 x 2-1/2
3/8 x 4-1/2
1/2 x 3-1/4
1/2 x 6
5/8 x 4
5/8 x 6
3/4 x 4-1/2
3/4 x 6
7/8 x 5
1x6
1x9
1-1/4 x 8
1-1/4 x 12
1-1/2 x 15
*
SEE warning
See
WARNING
and
INFORMATION
application
information
ON
PAGES 454
on page
- 461.?.
Stock
No.
G-277
Working
Load
Limit
(lbs.) *
Weight
Per 100
(lbs.)
650
650
1,200
1,200
1,550
1,550
2,600
2,600
5,200
5,200
7,200
7,200
10,600
13,300
13,300
21,000
21,000
24,000
6.60
9.10
12.50
18.80
21.40
25.30
42.60
56.80
68.60
102.40
144.50
167.50
225.00
366.30
422.50
650.00
795.00
1425.00
1045014
1045032
1045050
1045078
1045096
1045112
1045130
1045158
1045176
1045194
1045210
1045238
1045256
1045292
1045318
1045336
1045354
1045372
A
B
C
D
E
F
G
H
J
.25
.25
.31
.31
.38
.38
.50
.50
.62
.62
.75
.75
.88
1.00
1.00
1.25
1.25
1.50
.50
.50
.62
.62
.75
.75
1.00
1.00
1.25
1.25
1.50
1.50
1.75
2.00
2.00
2.50
2.50
3.00
.88
.88
1.12
1.12
1.38
1.38
1.75
1.75
2.25
2.25
2.75
2.75
3.25
3.75
3.75
4.50
4.50
5.50
.19
.19
.25
.25
.31
.31
.38
.38
.50
.50
.62
.62
.75
.88
.88
1.00
1.00
1.25
1.50
2.50
1.50
2.50
1.50
2.50
1.50
3.00
2.00
3.00
2.00
3.00
2.50
3.00
4.00
4.00
4.00
6.00
2.00
4.00
2.25
4.25
2.50
4.50
3.25
6.00
4.00
6.00
4.50
6.00
5.00
6.00
9.00
8.00
12.00
15.00
2.94
4.94
3.50
5.50
3.97
5.97
5.12
7.88
6.44
8.44
7.44
8.94
8.46
9.97
12.97
12.72
16.72
20.75
.50
.50
.69
.69
.78
.78
1.00
1.00
1.31
1.31
1.56
1.56
1.84
2.09
2.09
2.47
2.47
3.00
.47
.47
.56
.56
.66
.66
.91
.91
1.12
1.12
1.38
1.38
1.56
1.81
1.81
2.28
2.28
2.75
Ultimate Load is 5 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
436
7/3/13 9:41 AM
Overhead
Cranes / Jibs
Stainless Steel
Swivels & Links
WT
A (Size)
B
C
D
lbs.
lbs.
5/32"
3/16"
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
.43
.50
.56
.75
.87
1.25
1.50
1.62
1.87
2.50
.50
.50
.56
.75
1
1.31
1.62
2
2
2.56
2
2.31
2.56
3.62
4.62
6
7.37
8.50
9.25
11
150
300
600
1,100
1,540
2,640
4,750
7,000
8,000
10,000
.12
.12
.12
.29
.55
1.25
2.10
3.40
5.02
8.73
Services
WLL
Engineered
Products
Dimensions (in.)
Hoists
Eye & Eye Swivel—316 Stainless Steel
Dimensions (in.)
WT
B
C
D
lbs.
lbs.
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
.50
.62
.75
1
1.25
1.50
.43
.62
.87
1.12
1.37
1.62
2.62
3.62
4.35
6
7.37
8.62
600
1,100
1,540
2,640
4,750
7,000
.14
.33
.63
1.40
2.36
3.93
Hardware
WLL
A (Size)
Slings
Eye & Jaw Swivel—316 Stainless Steel
Manufacturer recommends the use of thread locking fluid with this type of swivel.
WLL
WT
A (Size)
B
C
lbs.
lbs.
3/8
1/2
5/8
3/4
1
1-1/4
3
5
6
6.50
7
8.75
1.50
2.50
3
3.25
3.50
4.38
1,500
2,000
2,800
3,750
8,000
11,800
.35
.84
1.61
2.26
4.94
9.65
Wire
Rope
Dimensions (in.)
Lifting
Products
Master Link—316-NM Stainless Steel
Cordage
Each link is individually forged, not welded, and is stamped with size and working load.
Be sure all components of your assembly have matched WLL.
WT
A (size)
Dimensions (in.)
B
C
D
lbs.
lbs.
3/16
1/4
5/16
3/8
1/2
5/8
.29
.32
.38
.50
.62
.80
1.56
1.95
2.25
2.95
3.62
4.25
.59
.75
.80
1.24
1.37
1.86
.35
.48
.45
.79
.80
1.20
1,100
2,200
2,700
4,400
7,300
11,000
.12
.21
.31
.65
1.40
3.00
Contractors
Supply
WLL
in.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Size
Load
Securement
Hammerlock—316-NM Stainless Steel
437
7/3/13 9:41 AM
Stainless Steel
Hooks
Clevis Grab Hook—316 Stainless Steel
Size
Dimensions (in.)
WLL
WT
in.
A
B
C
D
lbs.
lbs.
1/4
5/16
3/8
1/2
.37
.36
.47
.54
.41
.36
.43
.50
.34
.40
.48
.60
1.83
2.08
2.55
2.85
1,500
2,000
2,500
3,600
.40
.60
1.05
1.84
Working loads are based on gradual pull, not shock loads. Includes removable clevis pin.
Clevis Slip Hook—316 Stainless Steel
Size
WLL
WT
in.
A
Dimensions (in.)
B
C
D
lbs.
lbs.
1/4
5/16
3/8
1/2
.37
.36
.47
.54
.41
.40
.43
.50
.58
.83
.95
1.05
2.57
2.73
3.04
3.53
1,000
1,500
2,000
3,000
.57
.82
1.14
2.13
Working loads are based on gradual pull, not shock loads. Includes removable latch & clevis pin.
Eye Grab Hook—316 Stainless Steel
Dimensions (in.)
WLL
WT
A (Size)
B
C
D
lbs.
lbs.
1/4
5/16
3/8
1/2
.50
.56
.50
.65
.35
.43
.50
.66
2
2.25
2.50
3.35
1,500
2,000
2,500
3,600
.35
.56
.89
1.51
Working loads are based on gradual pull, not shock loads.
Eye Slip Hook—316 Stainless Steel
WLL
WT
A (Size)
Dimensions (in.)
B
C
D
lbs.
lbs.
1/4
5/16
3/8
1/2
5/8
3/4
1
.53
.65
.71
.94
1.25
1.50
2
.68
.75
.80
1.02
2.06
2.48
3.3
2.54
3
3.28
4.17
6.51
7.82
10.42
1,000
1,500
2,000
3,000
11,000
16,000
28,000
.30
.54
.91
1.87
7
12.2
30
Working loads are based on gradual pull, not shock loads.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
438
7/3/13 9:41 AM
Overhead
Cranes / Jibs
Stainless Steel
Turnbuckles
Turnbuckle Body—316-NM Stainless Steel
WT
lbs.
1/4
4
4.75
.72
500
5/16
4.50
5.5
.82
800
3/8
6
7.13
.97
1,200
1/2
6
7.5
1.16
2,200
5/8
6
7.81
1.38
3,500
3/4
6
8.19
1.69
5,200
1
6
9
2.31
8,000
1
12
14.81
2.31
8,000
1-1/4
12
15.13
2.62
12,500
Meets WLL & dimensions of ASTM Specification F1145-92, Type1.
Hoists
WLL
lbs.
D
.15
.25
.35
.55
.90
1.15
2.69
4.17
5.90
Services
Dimensions (in.)
B (Adjust)
C
Engineered
Products
A (Size)
Turnbuckle Eye & Eye—316-NM Stainless Steel
WLL
lbs.
D
WT
lbs.
1/4
4
8
.33
500
5/16
4.50
9.25
.41
800
3/8
6
11.5
.5
1,200
1/2
6
13
.75
2,200
5/8
6
14.5
.87
3,500
3/4
6
16.25
1
5,200
1
6
20
1.38
8,000
1
12
25.5
1.38
8,000
1-1/4
12
28.38
1.71
12,500
Meets WLL and dimensions of ASTM Specification F1145-92, Type1, Class D.
.30
.50
.85
1.30
2.30
3.50
8.85
10.91
17.60
Slings
Dimensions (in.)
B (Adjust)
C
Hardware
A (Size)
WT
lbs.
1/4
4
7.88
.45
.44
500
5/16
4.50
9.25
.50
.5
800
3/8
6
11
.51
.56
1,200
1/2
6
12.5
.71
.63
2,200
5/8
6
14
.87
.75
3,500
3/4
6
15.63
.98
1
5,200
1
6
19
1.35
1.25
8,000
1
12
25
1.36
1.25
8,000
1-1/4 *
12
27.5
1.37
1.88
10,000
Meets WLL and dimensions of ASTM Specification F1145-92, Type1, Class H.
.35
.60
.80
1.55
2.69
4.00
9.66
11.79
19.96
Wire
Rope
WLL
lbs.
* Jaw for size 1-1/4" features a
round pin with cotter.
Cordage
E
Turnbuckle Jaw & Jaw—316-NM Stainless Steel
Dimensions (inches)
B (Adjust)
C
D
E
WLL
lbs.
1/4
4
7.75
.25
.44
500
5/16
4.50
9
.25
.5
800
3/8
6
10.63
.31
.56
1,200
1/2
6
12
.38
.63
2,200
5/8
6
13.5
.5
.75
3,500
3/4
6
15
.63
1
5,200
1
6
18
.88
1.25
8,000
1
12
24
.88
1.25
8,000
1-1/4 *
12
26.63
1.13
1.88
12,500
1-1/2 *
12.25
28.95
1.36
2.19
17,000
Meets WLL and dimensions of ASTM Specification F1145-92, Type1, Class H.
WT
lbs.
.45
.65
.90
1.60
3.05
4.25
10.59
12.66
22.32
31.04
Load
Securement
A (Size)
* Jaw for size 1-1/4" features a
round pin with cotter.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Contractors
Supply
Dimensions (inches)
B (Adjust)
C
D
Fall
Protection
A (Size)
Lifting
Products
Turnbuckle Jaw & Eye—316-NM Stainless Steel
439
7/3/13 9:41 AM
WARNING
G-Link™ Synthetic
Sling Connector
ON PAGES 454 - 461.
US Patent # 5,651,573 (G-Link)
Product Features:
■
■
■
■
■
■
Couples web, round or Twin-Path® slings with
hardware (oblongs or hooks).
Splices two slings into longer length.
Connects two slings with oblong and two hooks
into bridle sling.
Allows sling to be used as sliding choker sling.
Two G-Link™ connectors used together will double
the rated capacity of one G-Link™ connector.
Conforms with ASME B30.9 web and round sling
specifications.
Model
Number
Vertical
Choker
Sling
Rated
Capacity
(tons)
Rated
Capacity
(tons)
Size
(in.)
SC200L
SC300L
SC400L
SC500L
SC600L
2-1/2
5
7-1/2
15
25
2
3
4
8
12
2
3
4
5
6
Model
Weight
(lbs.)
2
3-1/2
7
15
29
Dimensions (in.)
A
B
C
D
E
F
G
H
J
O
R
T
W
2
3
4
5
6
5/8
11/16
13/16
1-1/16
1-1/4
1-1/8
1-1/4
1-3/8
2
2-1/4
5/8
11/16
13/16
1-1/16
1-1/4
1-1/3
2-1/4
2-1/2
3
4
1-15/16
2-7/16
2-7/8
3-3/4
5
1
1-1/4
1-3/8
2
2-1/4
5
6.62
7.5
9.75
12.5
1-13/16
2-1/2
2-3/4
3-3/4
4-3/4
1/2
9/16
3/4
1
1-1/4
.5
.75
.75
1
1
.5
.75
1
1.25
1.5
3.5
5
6
8
9.38
SC200L
SC300L
SC400L
SC500L
SC600L
Connect
Hook to Sling
Connect
Oblong to Sling
Connect
Two Slings
Choker
Hook
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
440
7/3/13 9:41 AM
inches
Grade 30
Proof Coil Chain—
decimals
.218
.276
.327
.390
.468
.531
.656
.787
1.031
800
1,300
1,900
2,650
3,700
4,500
6,900
10,600
17,900
Nominal Inside Link
Dimension (inches)
Length
Width
.95
1.00
1.10
1.23
1.37
1.50
1.87
2.12
2.75
.40
.47
.50
.62
.75
.81
1.00
1.12
1.50
Weight Per
100 Ft.
lbs.
38
66
98
144
210
278
422
628
1,069
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Overhead
Cranes / Jibs
Fall
Protection
Contractors
Supply
Load
Securement
Cordage
Wire
Rope
Lifting
Products
Hardware
Slings
embossed: G30 and date codes;
available in self-colored, zinc plated
and hot galvanized.
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
Working
Load Limit
lbs.
Hoists
Chain Size
Services
Quick-ship from stock!
ON PAGES 454 - 461.
Engineered
Products
WARNING
Proof Coil Chain—
Grade 30
441
7/3/13 9:41 AM
WARNING
Carbon Chains
ON PAGES 454 - 461.
Coil Chain—Twist Link
Trade
Number
Diameter
Wire
Link
Dimensions
Fractional
(in.)
Decimal
(in.)
Inside
Length
(in.)
Inside
Width
(in.)
1/8
9/64
5/32
11/64
3/16
7/32
1/4
.120
.135
.148
.177
.192
.218
.250
1-3/32
1-9/64
1-9/64
1-15/64
1-15/64
1-11/32
1-15/32
3/16
13/64
7/32
17/64
19/64
21/64
3/8
4
3
2
1/0
2/0
4/0
5/0
Links
Per
Foot
11
10-1/2
10-1/2
9-3/4
9-3/4
9
8-1/8
Weight
Working
Per 100 Ft. Load Limit
lbs.
lbs.
10
12
16
24
28
36
48
195
240
295
415
495
635
835
May be ordered bright (polished), zinc plated or hot galvanized. Packed 100 feet per carton.
WARNING: This chain is not for overhead lifting—working load limit is not to be exceeded!
Coil Chain—Straight Link
Trade
Number
Diameter
Wire
Link
Dimensions
Fractional
(in.)
Decimal
(in.)
Inside
Length
(in.)
Inside
Width
(in.)
1/8
9/64
5/32
11/64
3/16
7/32
1/4
.120
.135
.148
.177
.192
.218
.250
1-7/64
1-11/64
1-11/64
1-1/4
1-17/64
1-25/64
1-33/64
13/64
15/64
17/64
5/16
11/32
3/8
7/16
4
3
2
1/0
2/0
4/0
5/0
Links
Per
Foot
10-7/8
10-1/4
10-1/8
9-5/8
9-1/2
8-5/8
7-7/8
Weight
Working
lbs.
lbs.
10
13
15
23
27
35
46
205
255
310
440
520
670
880
May be ordered bright (polished), zinc plated or hot galvanized. Packed 100 feet per carton. Also available on reels or in 10 foot polybags.
Machine Chain—Twist Link
Trade
Number
Diameter
Wire
Link
Dimensions
Fractional
(in.)
Decimal
(in.)
Inside
Length
(in.)
Inside
Width
(in.)
1/8
9/64
5/32
11/64
3/16
7/32
1/4
.120
.135
.148
.177
.192
.218
.250
33/64
9/16
37/64
47/64
23/32
57/64
1
12/64
13/64
7/32
17/64
9/32
5/16
3/8
4
3
2
1/0
2/0
4/0
5/0
Links
Per
Foot
23
21-1/2
21
17-1/2
16-1/2
13-1/2
12
Weight
Working
lbs.
lbs.
13
16
20
29
34
44
57
205
255
310
440
520
670
880
May be ordered bright (polished), zinc plated or hot galvanized. Packed 100 feet per carton. Also available on reels.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
442
7/3/13 9:41 AM
Machine Chain—Straight Link
Decimal
(in.)
Inside
Length
(in.)
Inside
Width
(in.)
1/8
9/64
5/32
11/64
3/16
7/32
1/4
.120
.135
.148
.177
.192
.218
.250
35/64
19/32
39/64
47/64
25/32
61/64
1-5/64
7/32
15/64
17/64
5/16
11/32
3/8
7/16
4
3
2
1/0
2/0
4/0
5/0
Weight
Working
lbs.
lbs.
12
15
19
27
32
40
54
215
270
325
465
545
700
925
22
20-1/4
19-3/4
16-1/4
15-1/4
12-1/2
11-1/4
Hoists
Fractional
(in.)
Links
Per
Foot
Services
Link
Dimensions
Engineered
Products
Trade
Number
Diameter
Wire
May be ordered bright (polished), zinc plated or hot galvanized. Packed 100' per carton. Also available on reels.
2/0
4/0
(in.)
Inside
Length
(in.)
Inside
Width
(in.)
3/16
7/32
7/8
7/8
15/32
1/2
Links
Per
Foot
13-5/8
13-5/8
Weight Per
100 Ft.
Working
Load Limit
lbs.
lbs.
33
43
450
600
Hardware
Trade
Number
Link
Dimensions
Slings
Passing Link Chain
Size
Material
Lifting
Products
An electrically welded steel chain, the links of which are designed with the inside width greater than twice the
thickness of the material, thus allowing the two adjacent links to pass in any link, reducing any tendency to kink.
May be ordered bright (polished) or zinc plated. Packed 100 feet per carton. 2/0 size also available on
120 foot reels and 200 foot pails.
Material
Diameter
(in.)
Inside
Length (in.)
Links
Per
Foot
Weight Per
100 Ft.
Working
Load Limit
lbs.
lbs.
5
4
3
2
1
1/0
2/0
3/0
4/0
8/0
100
100
100
100
100
100
100
100
100
100
.062
.072
.080
.092
.105
.120
.135
.148
.162
.225
.92
1.00
1.10
1.33
1.50
1.71
1.71
2.18
2.18
2.90
13
12
11
9
8
7
7
5.5
5.5
4.1
3-1/2
4-1/2
5-3/4
7-1/2
10
13
17
20
23
48
55
70
90
115
155
200
255
305
365
705
Cordage
Feet Per
Carton
Load
Securement
Trade
Number
Wire
Rope
Double Loop Chain
Contractors
Supply
Applications: A general purpose chain, often used for playground equipment, animal leaches, fixture, swing or hammock
suspensions, boats and gates. Description: Standard material is mild steel. Finishes include bright or zinc plated.
Packing: Standard packaging is 100 feet per carton. Sizes 4 through 4/0 also available on reels.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
Overhead
Cranes / Jibs
ON PAGES 454 - 461.
KCI Crane Service
Fall
Protection
WARNING
Carbon Chains (Continued)
443
7/3/13 9:41 AM
WARNING
ON PAGES 454 - 461.
Single Loop Chain
Trade
Number
Feet Per
Carton
Material
Diameter
(in.)
Inside
Length
(in.)
Links
Per
Foot
Weight Per
100 Ft.
Working
Load Limit
lbs.
lbs.
2
1/0
2/0
3/0
4/0
5/0
100
100
100
100
100
100
.091
.120
.135
.148
.162
.177
1.08
1.29
1.48
1.63
1.80
2.15
11.1
9.3
8.1
7.4
6.7
5.6
10
17
22
26
31
35
155
265
340
405
485
580
Applications: Ideal for sprocket wheel or valve wheel, overhead door, ventilator and machinery chains or applications
requiring greater strength than double loop chain. Description: Standard material is mild steel; also available in brass.
Finishes include bright or zinc plated. Packing: Standard packaging is 100 feet per carton. Also available on reels.
Single Jack Chain
Weight Per
100 Ft. (lbs.)
Working Load
Limit (lbs.)
Trade
Number
Feet Per
Carton
Material
Diameter
(in.)
Inside
Length
(in.)
Links
Per
Foot
Steel
Brass
Steel
Brass
18
16
14
12
10
8
100
100
100
100
100
100
.047
.062
.080
.105
.135
.162
.39
.50
.63
.75
.93
1.09
31
25
19
16
13
11
1-3/4
3
5
8-3/4
14-3/4
20-1/2
2
3-1/4
5-1/4
9-1/4
15-1/4
22
5
10
16
29
43
60
4
8
11
20
34
43
Applications: A light general utility chain often used to suspend light fixtures or novelties.
Description: Standard material is mild steel; also available in brass. Finishes include bright or zinc plated.
Packing: Standard packaging is 100 feet per carton. Also available on reels.
Safety Chain / Brass
Trade
Number
Feet Per
Carton
Stock
Thickness
(in.)
Inside
Length
(in.)
Links
Per
Foot
Weight Per
100 Ft.
Working
Load Limit
lbs.
lbs.
2/0
1/0
1
3
100
100
100
100
.018
.023
.028
.037
.44
.50
.60
.75
27
24
20
16
2-1/4
2-1/2
3-1/4
6-1/4
23
30
40
75
Applications: A light general utility chain often used to suspend light fixtures or novelties.
Description: Standard material is mild steel; also available in brass. Finishes include bright or zinc plated.
Packing: Standard packaging is 100 feet per carton. Also available on reels.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
444
7/3/13 9:41 AM
Feet Per
Carton
Stock
Thickness
(in.)
Inside
Length
(in.)
Links
Per
Foot
Weight Per
100 Ft.
Working
Load Limit
lbs.
lbs.
8
25
30
35
40
45
50
100
100
100
100
100
100
100
.035
.042
.028
.035
.042
.050
.062
.57
.57
.57
.57
.55
.55
.62
21
21
21
22
22
22
19.5
4
5
5-1/2
7
8
9-1/2
13
75
94
80
105
140
175
225
Engineered
Products
Services
Trade
Number
Hoists
Sash Chain
Applications: Ideal for sprocket wheel or valve wheel, overhead door, ventilator and machinery chains or applications
requiring greater strength than double loop chain. Description: Standard material is mild steel; also available in brass.
Finishes include bright or zinc plated. Packing: Standard packaging is 100 feet per carton. Also available on reels.
250
.135
.57
Working Load
Limit
lbs.
Hardware
2/0
Approx. Weight
Per Carton
lbs.
255
Lifting
Products
Applications: Primarily used with windlass and bucket to raise water from wells or cisterns. Also, considered a
general utility chain. Description: mild steel chain, zinc plated. Finishes include bright, copper plated and zinc plated.
Packing: 250 feet per carton.
Hooks
WARNING
Pieces
Per
Carton
WLL
in.
lbs.
1/4
5/16
3/8
1/2
2,600
3,900
5,400
9,200
Weight
Per
Carton
10
10
10
10
lbs.
Self
Colored
Part
Number
ElectroGalv.
Part
Number
3
5
8
20
6460-205-00
6460-305-00
6460-405-00
6460-605-00
6460-205-04
6460-305-04
6460-405-04
6460-605-04
Load
Securement
Chain
Size
Cordage
Grade 30—Eye Grab Hook
ON PAGES 454 - 461.
Winch Hook with Latch
Chain
Size
WLL
in.
lbs.
3/4
1,875
Pieces
Per
Carton
Weight
1
48
lbs.
Electro-Galv.
Part
Number
Grade 30—
Eye Grab Hook
6497-300-04
Winch Hook
with Latch
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Contractors
Supply
Material
Diameter
(in.)
Fall
Protection
Feet
Per Reel
Slings
Special Well Chain
Trade
Number
Overhead
Cranes / Jibs
ON PAGES 454 - 461.
Wire
Rope
WARNING
445
7/3/13 9:41 AM
WARNING
Proof Coil—Grade 30
■
■
ON PAGES 454 - 461.
A general light purpose chain ideal for most applications
requiring a light-duty steel chain
Available in self-colored, electro-
galvanized, hot galvanized and power coated (by special order)
G30 Specifications
Chain
Size
WLL
in.
lbs.
1/8 *
3/16
1/4 **
1/4
5/16 **
5/16
3/8 **
3/8
1/2
5/8
3/4 *
Weight
Material Inside
Per
Dia.
Length
100 Ft.
lbs.
in.
in.
400
800
1,300
1,300
1,900
1,900
2,650
2,650
4,500
6,900
10,600
21
37
55
59
79
100
115
145
264
393
628
.16
.21
.275
.275
.33
.33
.397
.397
.52
.63
.78
Inside
Width
in.
.90
.95
1.24
1.02
1.30
1.15
1.45
1.30
1.56
1.87
2.71
Round Pails
.27
.39
.46
.50
.49
.49
.60
.60
.81
1
1.04
Chain
Size
in.
1/8 *
3/16
1/4 **
1/4
5/16 **
5/16
3/8 **
3/8
1/2
*
Imported
** Long Link--chain that has a reduction in weight and cost
without comprising strength
Drums
Chain
Size
in.
1/8 *
3/16
1/4 **
1/4
5/16
5/16 **
3/8
3/8 **
1/2
5/8
3/4 *
Feet
Per
Drum
2,000
1,000
1,600
800
800
400
800
400
550
275
550
275
400
200
400
200
200
100
150
75
100
50
Weight
Per
Drum
lbs.
430
215
602
301
450
252
482
241
446
250
560
280
470
270
590
295
538
269
590
295
628
311
Feet
Per
Pail
500
250
141
141
92
92
63
63
36
Weight
Per
Pail
lbs.
105
95
89
98
84
92
86
92
95
Self
Colored
Part
Number
2113-502-00
2116-601-00
2119-601-00
2119-503-00
2123-601-00
2123-503-00
2126-601-00
2126-503-00
2133-501-00
ElectroGalv.
Part
Number
2113-502-04
2116-601-04
2119-601-04
2119-503-04
2123-601-04
2123-503-04
2126-601-04
2126-503-04
2133-501-04
Hot
Galv.
Part
Number
2113-502-06
2116-601-06
2119-601-06
2119-503-06
2123-601-06
2123-503-06
2126-601-06
2126-503-06
2133-501-06
*
Imported
** Long Link
Self
Colored
Part
Number
2113-561-00
2113-562-00
2116-642-00
2116-641-00
2119-643-00
2119-644-00
2119-543-00
2119-544-00
2123-643-00
2123-644-00
2123-543-00
2123-544-00
2126-643-00
2126-644-00
2126-543-00
2126-544-00
2133-543-00
2133-544-00
2139-543-00
2139-544-00
2143-541-20
2143-544-20
ElectroGalv.
Part
Number
2113-561-04
2113-562-04
2116-642-04
2116-641-04
2119-643-04
2119-644-04
2119-543-04
2119-544-04
2123-643-04
2123-644-04
2123-543-04
2123-544-04
2126-643-04
2126-644-04
2126-543-04
2126-544-04
2133-543-04
2133-544-04
2139-543-04
2139-544-04
n/a
n/a
Hot
Galv.
Part
Number
Square Pails
Chain
Size
2113-561-06
2113-562-06
2116-642-06
2116-641-06
2119-643-06
2119-644-06
2119-543-06
2119-544-06
2123-643-06
2123-644-06
2123-543-06
2123-544-06
2126-643-06
2126-644-06
2126-543-06
2126-544-06
2133-543-06
2133-544-06
2139-543-06
2139-544-06
2143-541-56
2143-544-56
in.
3/16
1/4 **
5/16 **
3/8 **
1/2
**
Feet
Per
Pail
175
100
70
45
25
Weight
Per
Pail
lbs.
67
63
64
61
66
Self
Colored
Part
Number
2116-403-00
2119-606-00
2123-600-00
2126-600-00
n/a
ElectroGalv.
Part
Number
Hot
Galv.
Part
Number
2116-403-04
2119-606-04
2123-600-04
2126-600-04
2133-403-04
2116-403-06
2119-606-06
2123-600-06
2126-600-06
n/a
Self
Colored
Part
Number
ElectroGalv.
Part
Number
Long Link
Reels
Chain
Size
in.
1/4 **
5/16 **
3/8 **
*
Imported
** Long Link
**
Feet
Per
Reel
100
70
45
Weight
Per
Reel
in.
63
64
62
Reel
Width
in.
12-1/8"
12-1/8"
12-1/8"
2119-623-04
2123-632-04
2126-633-04
2119-623-06
2123-632-06
n/a
Long Link
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
446
7/3/13 9:41 AM
ON PAGES 454 - 461.
G30 / G43 Clevis Grab Hook
10
10
10
10
10
4
7
10
15
21
Hoists
ElectroGalv.
Part
Number
6470-205-04
6470-305-04
6470-405-04
6470-505-04
6470-605-04
Services
1/4
5/16
3/8
7/16
1/2
Weight
Per
Carton
lbs.
in.
Pieces Per
Carton
1/4
5/16
3/8
7/16
1/2
10
10
10
10
10
Weight
Per
Carton
lbs.
Electro-Galv.
Part
Number
5
8
13
21
29
G30 / G43
Clevis
Grab Hook
6495-205-04
6495-305-04
6495-405-04
6490-551-04
6490-605-04
Lockdown Chain
WARNING
ON PAGES 454 - 461.
Lifting
Products
Square heat treated links make it very difficult to
cut with conventional bolt cutters
Perfect for construction equipment, trailers, ATVs,
watercrafts and all your other valuables.
Also available for this lockdown chain is a special lock, part number: 8204-100-04. Contact manufacturer if multiple locks are needed that are keyed alike.
Wire
Rope
■
■
■
G30 / G43
Clevis
Slip Hook
With Latch
Slings
Chain
Size
Engineered
Products
G30 / G43 Clevis Slip Hooks with Latch
Specifications
mm (in.)
lbs.
10 mm (3/8)
13 mm (1/2)
n/a
n/a
Weight
Material Inside Inside
Per
Dia.
Length Width
100 Ft.
lbs.
in.
in.
in.
160
264
.66
1.10
1.49
1.742
Cordage
WLL
.622
.807
Load
Securement
Chain
Size
Drums
Feet Per
Drum
10 mm (3/8)
10 mm (3/8)
13 mm (1/2)
13 mm (1/2)
300
100
200
100
Weight Per
Drum
lbs.
481
160
562
283
Part
Number
Contractors
Supply
Chain
Size
mm (in.)
Hardware
in.
Pieces Per
Carton
1970-543-34
1970-512-34
1970-543-34
1973-544-34
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Chain
Size
Overhead
Cranes / Jibs
WARNING
Proof Coil—Grade 30
(Continued)
447
7/3/13 9:41 AM
WARNING
Weldless Chain
ON PAGES 454 - 461.
Decorator Chain
■
A light metal chain with oblong loop used in
the suspension of household items
Chain
Size
Working
Load Limit
Trade Size
#11
Specifications
Material
Diameter
Weight Per
100 Ft.
lbs.
45
lbs.
14
in.
.13
Reels
Chain
Size
Standard
Finish
Trade Size
#11
#11
#11
#11
Black
Polished Brass
Antique Brass
White
Weight
Per Reel
Feet
Per
Reel
lbs.
8
8
8
8
50
50
50
50
Plumber’s Chain (Solid Brass)
Chain
Size
Working
Load Limit
Chain
Size
Feet
Per
Carton
Trade Size
1/0
Trade Size
1/0
■
lbs.
3
Carton
Weight
Per Carton
lbs.
3
100
Part Number
lbs.
3-5/8
3-5/8
3-5/8
3-5/8
3285-521-42
3285-521-41
3285-521-43
3285-521-48
A flat metal stamped chain made of brass.
Specifications
Material
Diameter
Weight Per
100 Ft.
lbs.
35
Reel
Width
in.
.023
Chain
Size
Electro-Galv.
Part Number
Trade Size
1/0
4836-512-10
■
Double Jack Chain
Reels
Weight
Per Reel
Feet
Per
Reel
Reel
Width
in.
lbs.
5
200
3-5/8
Electro-Galv.
Part Number
4836-527-10
A chain made of light wire and used in the suspension of household or light industrial applications
Specifications
Chain
Size
Trade Size
#16
Working
Working
Load Limit
Load Limit
ElectroBrass
Galv.
lbs.
8
lbs.
11
Weight
Per
100 Ft.
Material
Diameter
lbs.
4
in.
.062
Reels
Chain
Size
Trade Size
#16
Feet
Per
Reel
200
Weight
Per Reel
Reel
Width
lbs.
9
in.
3-5/8
Brass
Part Number
Electro-Galv.
Part Number
4319-527-10
4319-527-04
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
448
7/3/13 9:41 AM
Weight
Each
Services
Dimensions (in.)
in.
S-247
lbs.
lbs.
A
B
C
D
E
F
G
H
L
N
P
R
1/4
5/16 - 3/8
7/16
1/2
1013021
1013049
1013067
1013085
2,600
5,400
7,200
9,200
.38
.81
1.25
1.56
.50
.56
.69
.81
.75
1.00
1.13
1.25
.50
.63
.69
.75
.31
.44
.56
.63
.38
.47
.59
.68
.75
1.00
1.09
1.25
1.00
1.19
1.31
1.44
.81
1.00
1.19
1.31
2.81
3.53
4.06
4.53
1.38
1.75
2.00
2.25
1.66
2.25
2.50
2.75
1.50
1.91
2.19
2.47
Chain
Size
Stock No.
Working
Load Limit
Weight
Each
Lifting
Products
Available in three popular sizes.
Body is forged and heat treated carbon steel.
All pins Alloy Steel — Quenched and Tempered.
Twin Clevis design provides a variety of uses and
can be used with Crosby Spectrum 3®, Spectrum 4®
and Spectrum 7® chain.
Wire
Rope
■
■
■
■
■
Hardware
S-249
Twin Clevis Link
Engineered
Products
Working
Load Limit
Slings
Stock No.
Dimensions (in.)
S-249
lbs.
lbs.
A
B
C
D
F
G
H
K
1012861
1012889
1012905
4,700
6,600
11,300
.31
.44
.98
.47
.53
.65
2.50
2.81
3.62
1.56
1.81
2.31
.38
.44
.56
1.31
1.53
1.91
.43
.50
.63
.94
1.00
1.31
.50
.56
.81
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Fall
Protection
Contractors
Supply
in.
1/4 - 5/16
3/8
7/16 - 1/2
Cordage
Chain
Size
Hoists
All pins Alloy Steel — Quenched and Tempered.
Body is forged and heat treated carbon steel.
Designed for linking all popular sizes of
Crosby Spectrum 3® and Spectrum 4® chain to
rings, end links, eye hooks, pad eyes, tractor
eye bolts, etc.
Load
Securement
■
■
■
■
Overhead
Cranes / Jibs
S-247
Double Clevis Link
449
7/3/13 9:41 AM
WARNING
Clevis Link
■
■
■
■
■
ON PAGES 454 - 461.
Drop-forged from special bar quality steel.
Heat-treated for greater strength and increased
wear characteristics.
Metric-marked.
Clear protective finish resists rust and provides
cleaner handling.
For rigging not involving overhead lifting.
Chain
Size
Working
Load Limit
Dimensions (in.)
in.
lbs.
A
B
C
D
E
F
5/16
3/8
4,400
6,600
2-1/8
2-1/8
3-1/16
3-3/16
9/16
21/32
3-17/64
3-27/64
5-15/32
5-19/32
25/64
15/32
Factory
Pack
10
10
Approx.
Weight Each
lbs.
.94
1.19
Quick Link
Chain
Size
Working
Load Limit
in.
lbs.
1/8
3/16
1/4
5/16
3/8
1/2
220
615
880
1,540
1,980
3,300
Inside
Width
Inside
Length
Standard
Pack
Gap
in.
in.
in.
20
20
20
20
10
10
13/64
1/4
9/32
3/8
7/16
19/32
25/64
1/2
9/16
11/16
3/4
15/16
1-9/64
1-1/2
1-3/4
2-5/16
2-7/16
3-3/16
Applications: Used as a repair link, connecting link or attaching device.
Description: Zinc-plated, not heat-treated. Use only with chain of equal or lower working load limit.
Not to be used for load securement (tie-down).
Repair Link
Trade
Size
Working
Load Limit
in.
lbs.
3/16 x 1
7/32 x 1-1/4
1/4 x 1-1/4
1/4 x 2
5/16 x 1-1/2
5/16 x 2
3/8 x 1-5/8
3/8 x 2
240
250
400
400
950
1,000
1,250
1,250
Pieces Per
Carton
Inside
Width
100
50
50
50
50
50
50
50
Inside
Length
Approx.
Weight Each
in.
in.
lbs.
1
1-1/4
1-1/4
2
1-1/2
2
1-5/8
2
25/64
1/2
9/16
11/16
3/4
15/16
3/4
3/4
.035
.055
.075
.105
.145
.170
.230
.240
Applications: A temporary repair link also used to couple light attachments.
Description: A mild steel, available with bright, hot galvanized or zinc-plated finishes.
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
450
7/3/13 9:41 AM
15/16
1
1-3/16
1-5/16
1-1/2
1-9/16
2-1/8
2-11/16
5/16
3/8
7/16
1/2
9/16
3/4
7/8
1
Hoists
Approx.
Weight Each
lbs.
.03
.05
.11
.17
.27
.39
.77
1.28
Services
525
800
1,300
1,900
2,650
3,500
4,500
6,900
Inside
Length
in.
Applications: A temporary repair link, use one size larger than proof coil chain (grade 30) with which it
is to be used. Also used to couple light attachments. Description: Low carbon steel, self-colored or
zinc-plated finish. Not to be used for load securement (tie-down).
Approx.
Weight Each
lbs.
Pieces Per
Carton
200
150
450
350
600
900
1,300
1,700
25
25
25
25
25
25
10
10
Hardware
3/16 x 1-1/4
3/16 x 2
1/4 x 1-1/2
1/4 x 2
5/16 x 2
3/8 x 2
1/2 x 2-1/2
5/8 x 4
Working
Load Limit
lbs.
0.0325
0.0525
0.775
0.0975
0.16
0.2325
0.6
1.45
Lifting
Products
Material Size &
Diameter
in.
Slings
Welded Ring
Applications: A chain attachment for general use.
Description: Low carbon steel. Finishes are bright or zinc-plated.
Wire Size
Inside
Length
in.
Throat
Opening
lbs.
20
16
.080
27/32
5/32
21
16
.080
11/16
5/32
40
42
.134
1
5/16
60
75
.192
1-11/16
7/16
61
100
.204
1-5/8
7/16
62 *
120
.175
1-3/8
9/16,1/4
72 *
95
.225
1-1/2
5/16,3/8
80
130
.250
1-3/4
7/16
81
160
.250
2-1/2
7/16
84 *
190
.250
1-25/32
5/16,1/2
100
290
.312
2-1/4
7/16
120
410
.375
2-3/8
1/2
Applications: Used to attach various accessories to chain. Low working load limits only.
Description: Mild steel, bright, zinc-plated. Packaging: 50 pieces in a carton.
Approx.
Weight Per 100
lbs.
1/4
1/4
1
3-3/4
3-7/8
2-1/2
4-3/4
6-1/4
8
6-1/4
11-3/4
19-1/2
* Figure 2
Cordage
Working
Load Limit
lbs.
Load
Securement
Hook No.
Wire
Rope
“S” Hook
Fig. 1
Fig. 2
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Contractors
Supply
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
Inside
Width
in.
Engineered
Products
Working Load
Limit
lbs.
Fall
Protection
Trade
Size
in.
ON PAGES 454 - 461.
Overhead
Cranes / Jibs
WARNING
Cold Shut
451
7/3/13 9:41 AM
WARNING
S Hooks
ON PAGES 454 - 461.
“S” hooks may be used for joining light weight chain and
assemblies such as hanging planters. Unequal eye “S” offer
greater flexibility in the rand of sizes required for joining.
Trailer Bulk S Hooks
Chain
Size
(dia. x
length)
3/8" x 2-7/8"
13/32" x 2-7/8"
7/16" x 13/32"
17/32" x 3-1/2"
Working
Load
Limit
Minimum
Ultimate
Tensile
lbs.
lbs.
750
875
1,250
1,900
3,000
3,500
5,000
7,600
Class
of
Trailer
Pieces
Per
Carton
No. 1
No. 2
No. 3
No. 4
10
10
10
10
Weight
Per
Carton
lbs.
ElectroGalv.
Part
Number
With Wire
Latch Part
Number
(Bulk Pack)
2.5
3
4
6
6495-511-33
6495-718-33
6495-716-33
6495-719-33
6495-411-83
6495-418-83
6495-416-83
6495-419-83
Weight
Per
Carton
lbs.
Part
Number
S Hooks (Light-Duty—Not for Trailer Assemblies)
Equal Eye
Trade
Number
11
7
19
25
375
Material
Size
Inside
Length
WLL
lbs.
in.
lbs.
Weight
Per 100
Pieces
lbs.
.12
.177
.192
.25
375
1
1-1/8
1-3/4
1-3/4
2-29/64
40
75
75
200
270
.148
.192
.25
.312
1-5/32
1-15/16
2
2-25/64
40
50
105
185
2
4
8
14.5
A
B
C
in.
in.
Pieces
Per
Carton
1.5
2.25
3.5
8
19.5
50
1
1.5
2
4
10
6450-116-04
6450-076-04
6450-196-04
6450-256-04
6453-756-04
50
1
2
4
7.5
6451-486-04
6451-926-04
6452-506-04
6453-126-04
Pieces
Per
Carton
Weight
Per
Carton
lbs.
ElectroGalv.
Part
Number
Equal Eye
Un-Equal Eye
148
192
250
312
Un-Equal Eye
Snap Links
Size
Trade
Number
lbs.
in.
1/4
5/16
3/8
1/2
2450Z
15/64
5/16
25/64
15/32
1-57/64
2-35/64
3-3/16
4-37/42
1/4
7/16
35/64
3/4
10
10
10
5
.64
1.5
2.9
3
6751-163-17
6751-203-17
6751-243-17
6751-325-17
G70 Double Clevis—Twin Link
Chain
Size
in.
1/4 x 5/16
3/8
7/16 x 1/2
Working
Load
Limit
lbs.
Pieces
Per
Carton
4,700
6,600
11,300
10
10
5
Weight
Per
Carton
lbs.
3
5
6
Caution: Not be used for
playground equipment or backyard
swing sets or other applications
involving the safety of persons
or property. Observe working
load limits.
ElectroGalv.
Part
Number
6749-105-28
6749-205-28
6749-304-28
Progressive Crane
Phone: 800-362-4601
Phone: 800-83-CRANE
Phone: 877-96-CRANE
Phone: 410-727-0665
www.induscowire.com
452
7/3/13 9:41 AM
Stock No.
Weight
Per 100
Services
Working
Load
Limit
Dimensions (in.)
in.
G-334
Galv.
S-334
S.C.
lbs. *
lbs.
A
B
C
D
E
F
G
H
L
3/8
1/2
5/8
3/4
7/8
1013432
1013450
1013478
1013496
1013511
1013441
1013469
1013487
1013502
1013520
1,850
3,300
5,000
7,100
9,600
25.00
50.00
75.00
125.00
200.00
.41
.50
.63
.75
.88
2.00
2.50
2.75
3.13
3.69
.56
.69
.81
1.00
1.25
.81
1.00
1.06
1.13
1.38
2.94
3.63
4.00
4.75
5.56
1.63
2.00
2.38
2.75
3.25
.47
.56
.63
.81
.94
1.38
1.69
2.06
2.50
3.00
.81
1.00
1.13
1.25
1.50
Engineered
Products
Chain
Size
Hoists
Has larger inside dimensions making it easier to
attach hooks or other fittings to the chain.
An exclusive Crosby product.
After making connections, rivets must be peened.
Slings
■
■
■
■
Overhead
Cranes / Jibs
G-334 / S-334
Pear Shape “Missing Link”®
Replacement Links
Hardware
*
WARNING: Not Suitable for use with Grade 80 or Grade 100 chain and chain slings used in overhead lifting.
G-335
Galv.
S-335
S.C.
lbs. *
** 3/16
** 1/4
** 5/16
3/8
7/16
1/2
5/8
3/4
7/8
†1
1013094
1013110
1013138
1013156
1013174
1013192
1013236
1013254
1013272
1013290
1013101
1013129
1013147
1013165
1013183
1013209
1013245
1013263
1013281
1013307
800
1,325
1,950
2,750
3,625
4,750
7,250
10,250
12,000
15,500
Weight
Per 100
20
10
10
10
10
10
10
10
Bulk
Bulk
Dimensions (in.)
lbs.
A
B
C
D
E
F
G
2.50
6.25
12.50
20.00
27.50
37.50
72.50
122.50
175.00
250.00
.25
.28
.34
.41
.47
.53
.66
.78
.91
1.03
.69
.88
.94
1.13
1.28
1.47
1.81
2.13
2.50
2.75
.34
.44
.47
.56
.59
.66
.78
.94
1.13
1.25
.34
.44
.47
.56
.59
.66
.81
1.06
1.13
1.25
1.19
1.50
1.69
2.06
2.34
2.66
3.31
3.88
4.50
5.00
.78
1.00
1.16
1.38
1.53
1.72
2.09
2.50
2.94
3.31
.28
.31
.38
.47
.53
.59
.75
.88
1.00
1.13
*
**
Rivets Only - No interlocking lugs.
†
Has reinforced rivet holes. All sizes have countersunk rivet holes.
WARNING: Not Suitable for use with Grade 80 or Grade 100 chain and chain slings used in overhead lifting.
J Henry Holland
Phone: 757-460-3300
Phone: 205-744-0230
Phone: 205-345-4701
KCI Crane Service
Cordage
in.
Links
Per
Box
Load
Securement
Working
Load
Limit
Contractors
Supply
Stock No.
Fall
Protection
Chain
Size
Integral rivets join the two halves.
After making connections, rivets must be peened.
Wire
Rope
■
■
■
Meets or exceeds the performance requirements of Federal
Specifications RRC-27lD, Type II, except for those provisions
Lifting
Products
G-335 / S-335
“Missing Link”®
Replacement Links
453
7/3/13 9:41 AM
Rigging Hardware
Product Warnings
454
7/3/13 9:42 AM
Engineered Shackles,
Rings & Hooks Warnings
Kulkoni
Shackles
Warnings
WARNING
WARNING
DO NOT EXCEED RATED CAPACITY.
Can fail if damaged, misused or overloaded.
Inspect before use. Use only if trained.
DEATH or INJURY can occur from improper
use or maintenance.
Skookum
Shackles
Warnings
For complete warning and application
information, see The Ulven Companies at
www.ulvencompanies.com
RUD
Load Rings
Warnings
information, see The RUD Group at
www.rud.com
■
■
Failure to follow warnings and instructions may result in serious injury or death.
Working Load Limit: This is the term used throughout the catalog. There are, however, other terms used in the industry which are interchangeable with the term Working Load Limit. These are: WLL, SWL, Safe Working Load,
Rated Load Value, Resulting Safe Working Load, and
Rated Capacity.
NEVER EXCEED THE WORKING LOAD LIMIT.
The Working Load Limit is the maximum load which should ever be applied to a product, even when the product is
new and when the load is uniformly applied - straight line pull only. Avoid side loading. All catalog ratings are
based upon usual environmental conditions, and
consideration must be given to unusual conditions
such as extreme high or low temperatures, chemical
solutions or vapors, prolonged immersion in salt water, etc. Such conditions or high-risk applications may necessitate reducing the Working Load Limit.
Working Load Limit will not apply if product has been welded or otherwise modified.
■
Matching of Components: Components must match. Make certain that components such as hooks, links or shackles, etc. used with wire rope (or chain or cordage) are of suitable material size and strength to provide adequate safety protection. Attachments must be properly installed and must have a Working Load Limit at least equal to the product with which they are used. Remember: Any chain is only as strong as its weakest link.
■
Raised Loads: Keep out from under a raised load.
Take notice of the recommendation from the Safety Council Accident Prevention Manual concerning all lifting
operations: "All employees working at cranes or hoists or assisting in hooking or arranging a load should be
instructed to keep out from under the load. From a safety standpoint, one factor is paramount:
■
■
Conduct all lifting operations in such a manner, that if there were an equipment failure, no personnel would be injured.
This means keep out from under a raised load and keep out of the line of force of any load."
Do not operate a load over people.
Do not ride on loads.
Shock Loads: Avoid impacting, jerking or swinging of
load as the Working Load Limit could be exceeded and the
Working Load Limit will not apply. A shock load is generally significantly greater than the static load.
AVOID SHOCK LOADS.
information, see Kulkoni Inc. at
www.kulkoni.com
455
7/3/13 9:42 AM
Hoist Hooks
Warnings
Swivel Hoist Rings
Warnings
WARNING
■
■
■
■
■
■
■
WARNING
■
■
■
■
■
■
■
■
■
Loads may slip or fall if proper Hoist Ring assembly and
lifting procedures are not used.
A falling load may cause serious injury or death.
Install hoist ring bolt to torque requirements
(www.thecrosbygroup.com) for the HR-125, HR-1000, HR125C, HR-1000CT, HR-125M, HR-1000M and HR125W,
SS-125 and SS-125M respectively.
Web sling HR-125W spool bolt must be securely tightened in place. The jam nut must then be securely tightened onto the connecting bolt.
Read, understand and follow all instructions and
chart information.
Do not use with damaged slings, chain or webbing.
For inspection criteria see ASME B30.9.
Use only genuine Crosby parts as replacements.
HR-125C chain connecting pin must be properly secured with the locking pin into the clevis ear.
Before use tighten
information, see The Crosby Group
at www.thecrosbygroup.com
Crosby 319N, 320N or 322N hook with an S-4320 latch
attached and secured with cotter pin or bolt, nut and pin;
or a PL-N latch attached and secured with toggle pin
may be used for lifting personnel. A hook with a Crosby
SS-4055 latch attached shall NOT be used for
personnel lifting.
See OSHA Directive CPL 2-1.29 - Crosby does not
recommend the placement of lanyards directly into the
positive locking Crosby hook when hoisting personnel.
Crosby requires that all suspension systems (vertical
lifelines / lanyard) shall be gathered at the positive
locked load hook by use of a master link, or a bolt-type
shackle secured with cotter pin.
Threads may corrode and/or strip and drop the load.
Remove securement nut to inspect or to replace S-322,
S-3316, and S-3319 bearing washers (2).
Hook must always support the load. The load must never
be supported by the latch.
Never apply more force than the hook’s assigned
Working Load Limit (WLL) rating.
Read and understand these instructions before using hook.
Malleable Clips—
Zinc Plated
Skookum
Master Link
Warnings
WARNING
■
Failure to read, understand and follow these instructions may cause injury and property damage.
■
Follow all Warnings, Use and Application Instructions as supplied by the Manufacturer.
■
Read and understand these instructions before using
malleable clips.
■
Never use malleable clips for critical, heavy duty or
overhead loads, such as lifting slings, support lines,
guy lines, towing lines, tie downs, scaffolds, etc.
■
Malleable clips are to be used for making eye termination assemblies.
- Only with right regular lay wire rope
- Only for non-critical light duty uses with small applied loads, such as hand rails, fencing, guard rails, etc.
■
Apply first load to test the assembly. This load should be of
equal or greater weight than loads expected in use. Next, check
and retighten nuts to recommended torque.
WARNING
Improper use of links can result in serious bodily injury, property
damage and/or death. Only properly trained and competent
persons are allowed to use links in a proper application. Never
exceed working load limit.
information, see The Ulven Companies at
www.ulvencompanies.com
456
7/3/13 9:42 AM
SHUR-LOC® Swivel Hooks
Warnings
Golden Gate® Hooks
Warnings
WARNING
WARNING
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Loads may disengage from hook if proper procedures
are not followed.
Positive locking latch will unlock when trigger is depressed. Never use hook unless hook and latch are fully closed
and locked.
Keep body parts clear of pinch point between hook tip and hook latch when closing.
Keep hand(s) from between throat of hook and sling or
other device.
Do not use hook tip for lifting.
Shank threads may corrode and/or strip and drop the load.
Remove securement nut to inspect threads for corrosion
or to replace S-1326A bearing washers (2) and or S-13326 thrust bearing.
See OSHA Rule 1926.1431(g) and 1926.1501(g) for
personnel hoisting by cranes or derricks. A Crosby 318A, 1326A, 13326, 1316A, or 1317A hook may be used for
lifting personnel.
Use only genuine Crosby parts as replacements.
Read and understand these instructions before using hook.
Loads may disengage from hook if proper procedures are not followed.
Before using, inspect the hook and gate daily to ensure it is in proper operating condition.
Failure to properly insert the pin could result in the
load falling.
All Golden Gate® Hooks with threaded shanks require a pin to secure the nut to the shank. This pin prevents the nut from backing off or unscrewing from the threads and
causing the load to drop.
If the pin and nut are removed from the shank to replace
any hook components, the pin and nut must be installed before use.
1. NOTE: If a solid pin was used, the old pin “must”be discarded and a new pin inserted to secure the nut to
the shank.
2. If a spring pin (coil type) was used, it may be reused provided that the spring pin and / or the drill hole
was not damaged.
The gate is not a load-bearing device. Do not allow the sling or other loads to bear against the gate.
Threads may corrode and / or strip and drop the load.
Hands, fingers and body should be kept away from the
hook and load whenever possible.
Read and understand these instructions before using.
Hook Latch Kit
Warnings
WARNING
■
Loads may disengage from hook if proper procedures are
not followed.
■
■
See OSHA Rule 1926.1431(g)(4)(iv)(B) and
1926.1501(g)(1)(i) (A) for personnel hoisting for cranes
and derricks. Only a Crosby or McKissick hook with
a PL Latch attached and secured with bolt, nut and cotter
(or Crosby Toggle Pin) or a Crosby hook with a S-4320 Latch attached and secured with a cotter pin, or a Crosby
SHUR-LOC® hook in the locked position may be used for any personnel hoisting. A hook with a Crosby SS-4055 latch attached shall NOT be used for personnel lifting.
■
■
hook and latch.
457
7/3/13 9:42 AM
Pear-Shaped Master
Links Warnings
Weld-On Pivot Link
Warnings
WARNING
CHAIN SLING FAILURE CAN CAUSE
DEATH OR INJURY.
SLING FAILURE RESULTS FROM MISUSE,
DAMAGE, ANDEXCESSIVE WEAR
WARNING
■
■
■
■
Loads may disengage from link if proper welding, assembly, and lifting procedures are not used.
Do not use with damaged slings or chain. For sling
inspection criteria see ASME B30.9.
Read and understand these instructions before welding on, or using the pivoting link.
WARNING
■
NEVER use a sling without training.
■
ALWAYS inform yourself…Ask your employer for the
manufacturer’s sling use limitations.
■
ALWAYS comply with applicable Federal and local
regulations.
■
ALWAYS know load weight.
■
NEVER use a sling without a legible rated load tag.
■
NEVER overload a sling.
■
NEVER ride on sling or load.
■
NEVER use an improper sling configuration.
■
NEVER use a worn-out or damaged sling.
■
NEVER use a sling in extreme temperatures.
■
NEVER use a sling in acidic conditions.
Weld-On Excavator
Hooks Warnings
information, see Gunnebo Johnson
at www.gunnebojohnson.com
WARNING
Eye Type Self-Locking
& Swivel Bronze
Bushing Hooks
Warnings
ALLOY STEEL SELF-LOCKING HOOKS
■
LOAD DISENGAGEMENT CAN CAUSE DEATH OR INJURY
DISENGAGEMENT RESULTS FROM
MISUSE, DAMAGE AND EXCESSIVE WEAR
WARNING
■
■
■
■
■
■
■
■
■
■
■
WARNING
NEVER use a hook without training.
ALWAYS inform yourself…Ask your employer for
hook safe use instructions.
ALWAYS comply with applicable Federal and
local regulations.
ALWAYS know hook load.
NEVER use a hook without a legible product identifier.
NEVER overload a hook.
NEVER rise a hook or load.
NEVER rig a hook to load improperly
NEVER use a worm-out or damaged hook.
NEVER use a hook in extreme temperatures.
NEVER use a hook in acidic conditions.
ALLOY STEEL SELF-LOCKING HOOKS
■
LOAD DISENGAGEMENT CAN CAUSE DEATH OR INJURY
DISENGAGEMENT RESULTS FROM
MISUSE, DAMAGE AND EXCESSIVE WEAR
WARNING
■
■
■
■
■
■
■
■
■
■
■
NEVER use a hook without training.
ALWAYS inform yourself…Ask your employer for
hook safe use instructions.
ALWAYS comply with applicable Federal and
local regulations.
ALWAYS know hook load.
NEVER use a hook without a legible product identifier.
NEVER overload a hook.
NEVER rise a hook or load.
NEVER rig a hook to load improperly
NEVER use a worm-out or damaged hook.
NEVER use a hook in extreme temperatures.
NEVER use a hook in acidic conditions.
458
7/3/13 9:42 AM
S-4320 Latch Kits
Warnings
PL-N/O Latch Kits
Warnings
WARNING
WARNING
■
are not followed.
■
■
■
personnel hoisting by crane or Derricks. A Crosby S-319N, S-320N, S-322N, S-1320, A-339 and A-1339 Hook with an S-4320 latch attached (When secured with cotter pin) may
be used for lifting personnel.
■
An S-4320 Latch is only to be used with a Crosby S-319N, S-320N, S-322N, S-1320, A-339 and A-1339 Hook.
■
DO NOT use this latch in applications requiring
non-sparking.
■
■
■
■
■
S-4055 Latch Kits
Warnings
PL Latch Kits
Warnings
WARNING
WARNING
■
■
■
■
■
are not followed.
Personnel Hoisting by Crane or Derricks. A Crosby or
McKissick Hook with a Positive Locked PL-N/O or S-4320
Latch may be used to Lift Personnel.
hook and latch.
■
■
■
■
■
Loads may disengage from hook if proper procedures are
not followed.
Personnel Hoisting by Cranes or Derricks. A Crosby or
McKissick Hook with a positive Locked PL or S-4320 Latch
may be used to Lift Personnel.
hook and latch.
are not followed.
See OSHA Rule 1926.1431(g)(1)(i)(A) and
1926.1501(g)(4)(iv)(B). A hook and this style latch must
not be used for lifting personnel.
Hook must always support the load. The load must
never be supported by the latch.
hook and latch.
459
7/3/13 9:42 AM
S-4088 Alloy Hook
Latch Kits Warnings
Chicago Hardware
Forged & Stainless Steel
Eye Bolts Warnings
WARNING
■
are not followed.
■
■
■
personnel hoisting by crane or Derricks. A Crosby S-319N, S-320N, S-322N, S-1320, A-339 and A-1339 Hook with an S-4320 latch attached (When secured with cotter pin) may
be used for lifting personnel.
■
An S-4320 Latch is only to be used with a Crosby S-319N, S-320N, S-322N, S-1320, A-339 and A-1339 Hook.
■
DO NOT use this latch in applications requiring
non-sparking.
information, see Chicago Hardware & Fixture
Company at www.chicagohardware.com
Crosby Forged Eye Bolts
Warnings
Regular
Nut Eye
G-Link™
Synthetic Sling
Connector
Warnings
WARNING
■
■
■
■
Load may slip or fall if proper eye bolt assembly and lifting procedures are not used.
A falling load can seriously injure or kill.
Read and understand both sides of these instructions, and follow all eye bolt safety information presented here.
Read, understand, and follow information in diagrams and charts below before using eye bolt assemblies.
WARNING
■
■
■
■
■
Shoulder
Nut Eye
Can fail if damaged, misused or overloaded.
Inspect before use.
Use only if trained.
Observe rated capacity.
DEATH or INJURY can occur from improper use
or maintenance.
RUD Eye Bolt
Warnings
information, see Slingmax Rigging Solutions
at www.slingmax.com
information, see The RUD Group at
www.rud.com
460
7/3/13 9:42 AM
Chain
Warnings
Laclede Chain
Warnings
WARNING
■
■
This chain is not to be used for overhead lifting.
Working Load Limit is not to be exceeded.
Cold Shut
Warnings
WARNING
■
■
information, see Laclede Chain Manufacturing
Company, LLC. at www.lacledechain.com
WARNING
■
■
This chain is not to be used for overhead lifting.
Never exceed the Working Load Limit.
information, see Columbus McKinnon
Corporation at www.cmworks.com
Link
Warnings
Clevis
Link
Quick
Link
Repair
Link
WARNING
■
■
information, see Columbus McKinnon
Corporation at www.cmworks.com
461
7/3/13 9:42 AM

Hardware - Mazzella Companies

Transcription

Similar documents

Load Securement - Mazzella Companies

Closed Bridge Socket Page 10 Open Bridge Socket Page 8 Open

SUPER STRONG SHACKLES