PDF - Garrett Leather

Comments

Transcription

PDF - Garrett Leather
I N S I D E G A R R E T T L E AT H E R
C
O
R
P
O
R
A
T
E
Welcome to Garrett Leather Corporation
For over 25 years, Garrett Leather’s products have been specified for private
and corporate aircraft, furniture upholstery, corporate, residential and hospitality
interiors, private yachts, motor coaches, and automobile restoration.
Superior quality products, huge selection, unmatched customer service, and
exceptional value have made Garrett Leather the preferred leather resource for
upholsterers and designers worldwide.
800.342.7738
www.garrettleather.com
Pearlessence® in the lobby of the
Children’s Hospital in St. Petersburg, Florida
Garrett Leather Headquarters - Buffalo, New York
C
O
M
P
E
T
I
T
I
V
E
A
D
V
A
N
T
A
G
E
Quality
High Cutting Yields
Garrett Leather’s premium European raw materials are tanned in Italy, resulting in superior quality
products with higher cutting yields. The finished hides are carefully hung on “horses” rather than
stored in tubes to prevent wrinkles and creases from forming.
Garrett Leather’s superior, extra large hides provide higher cutting yields with minimal waste.
Selection
Half hide orders are accepted without imposing any additional cutting fees.
S
Half Hide Minimums
Over two million square feet of upholstery leather and a variety of specialty products are available
in over 600 colors.
Fiberdye® Color
Convenience
Garrett Leather’s exclusive Fiberdye® is the dyeing process that results in true color permanence.
Fiberdye® penetrates all layers of the hide, producing deep, vibrant, durable colors. Look for
Fiberdye® when purchasing quality leather.
Most products are in stock and ready for immediate shipment. Over 90% of all orders ship within
48 hours of purchase. All major credit cards are accepted.
Environmentally Friendly
Garrett leather consists of 100% organic reclaimed material that would otherwise end
up in landfills. The tanning agents used are composed of natural minerals and all surface
finishes are water-based. Most products are GREENGUARD Indoor Air Quality Certified ®.
Leather is exceptionally durable, lasting up to five times longer than other fabrics, thus
reducing maintenance and replacement costs, as well as waste.
Burn Certification
Most of Garrett Leather’s colors are treated to pass industry flammability requirements during the
tanning process, at no additional charge. Certification is available upon request.
Superior Customer Service
Service representatives at Garrett Leather are second to none in the industry. Friendly, knowledgeable
customer service representatives will answer all of your questions and send your samples to you
in a timely fashion.
R
Custom Color Capabilities
Garrett Leather offers custom colors. Please call for a quote and lead time.
Anti-bacterial Protection
Many products pass industry anti-bacterial tests and inhibit the growth of common bacteria. Leather
is easy to dust and maintain, making it an excellent option for those living with asthma or allergies.
Water Resistance
All semi-aniline products have water and stain repellents dyed into the leather for moisture resistance.
UV Protection
ll semi-aniline products have durable surface finishes that guard against fading, cracking,
A
and peeling.
Global Support
Garrett Leather has sales representatives and showrooms worldwide.
8 0 0 . 3 4 2 . 7 7 3 8 w w w. g a r r e t t l e a t h e r. c o m
w w w. g a r r e t t l e a t h e r. c o m 800.342.7738
P
R
O
D
U
C
T
G
U
I
Arri
Caressa
Avion
Chatham
Berkshire
DiModa Cobra
Arri is full grain, semi-aniline leather produced from European
cowhides and tanned in Italy. Arri has a soft hand and very
smooth grain. It is made to match original Ferrari® colors and
conforms to the same strict automotive specifications. Arri offers
exceptional durability and resistance to wear, regardless of the
application. It is an excellent option for all interiors, especially for
the highest traffic areas.
Garrett Avion® is semi-aniline leather produced from European
cowhide. All Avion colors are treated during the tanning process
to meet industry flammability requirements. A dual enhanced
grain provides uniformity and consistency throughout the hides.
The durable finish offers excellent resistance to wear. Avion is
recommended for all upholstery applications, especially high
traffic areas.
D
E
®
Caressa® is full grain semi-aniline leather produced from premium
selection European cowhide. Caressa® has a light finish,
providing a calf-like softness and a supple hand. The subtle sheen
accentuates the true beauty of this leather, making it an excellent
choice for most upholstery applications.
Garrett Chatham® is full grain, semi-aniline Italian leather. No
corrections or alterations are made to the natural grain during
the tanning process. The soft yet durable matte finish provides
excellent resistance to wear. As one of the best-selling products,
Chatham is recommended for all upholstery applications.
Berkshire is semi-aniline leather produced from European cowhide.
A beautiful subtle enhanced grain pattern provides excellent cutting
yields. Recommended to customers who are looking for minimal
natural markings, Berkshire offers exceptional durability suitable
for all upholstery applications.
DiModa Cobra offers the look of patent leather with added
texture. These Italian hides are staked and cut, giving the realistic
reptile effect, and then drummed with water and dye to color
the areas where cut. DiModa Cobra is recommended for low to
moderate traffic areas.
Cadence
DiModa Gatora
Caiman
Distressed
Cadence is semi-aniline leather produced on European cowhides
and tanned in Italy. The consistent, uniform grain provides
exceptional value with superior cutting yields and little waste.
The durable, anti-bacterial finish is suitable for all upholstery
applications, especially high traffic areas.
Caiman is an exotic reptile pattern that is embossed on Garrett
Distressed® and Garrett Vintage®. Caiman hides are embossed in
Italy and are available in both whole and half hide sizes. Color
variations and natural marks are inherent characteristics of this
leather. This product will darken with use and develop a rich
patina over time.
8 0 0 . 3 4 2 . 7 7 3 8 w w w. g a r r e t t l e a t h e r. c o m
DiModa Gatora is Italian patent leather with an alligator pattern.
The finish on DiModa Gatora hides includes a unique pearl
effect. The hides are tumbled with water for several hours to
increase softness. DiModa Gatora is highly water resistant and is
recommended for all upholstery applications.
Distressed is full grain, pure aniline Italian leather with no pigmented
surface protection. These European cowhides are tumbled with
paraffin wax, producing unique variations in texture and color. A
light wax coat is added to provide increased moisture resistance.
Color variations and natural marks are inherent characteristics of
this leather. This product will darken with use and develop a rich
patina over time.
w w w. g a r r e t t l e a t h e r. c o m 800.342.7738
P
R
O
COMING
SOON
D
U
C
T
U
I
D
Flight
Mystique Croco
Glazed
Native
Kenya
Newport Club
E
®
Flight is full grain, semi-aniline leather produced from premium
selection European bullhide. Flight has a smooth, matte surface
and durable, anti-bacterial, and water resistant finish. It is treated
during the tanning process to meet strict aviation flammability
requirements, including FAR standards, as well as the 60-second
vertical burn test. While ideal for aviation, Flight’s gorgeous appeal
and exceptional durability expands across multiple applications,
including high-traffic hospitality, corporate, and residential settings.
Garrett Glazed® is semi-aniline, full grain leather. The hides are
milled in heated drums then ironed using a special process that
imparts a smooth surface and very fine grain. The beautiful mottled
appearance highlights the style of this classic leather. The spill
resistant, high gloss finish makes Glazed a durable option for high
traffic areas.
Kenya is Garrett Leather’s shrunken nubuck. Made from the
desirable top layer of the hide, Kenya is not to be confused with
a true suede, which is made from the less desirable split (lower
layers of the hide). Kenya offers a higher cutting yield, making
it an excellent alternative to smaller split suede. Light surface
protection is applied. Kenya is recommended for low to moderate
traffic areas.
Luxianna
®
Luxianna® is full grain European bullhide, providing more density
and a stronger fiber structure than cowhide. Each hide is vacuum
dried to produce a tight grain and heat rolled to create an elegantly
smooth surface. A light, organic finish is applied, allowing the
product to wear into a beautiful, vintage look. Luxianna® is
recommended for low to moderate traffic areas, as signs of wear
will appear with use.
Mystique
®
Mystique® is created using sizable European bullhide, providing
more density and a stronger fiber structure than cowhide. A laborintensive process called “hand-tipping” is used to apply a darker
“tipped” color onto a lighter tone hide. This unique two-tone effect
will show variations in shading from hide to hide and even within a
hide. Mystique® offers excellent durability and resistance to wear.
800.342.7738
G
w w w. g a r r e t t l e a t h e r. c o m
Premium European bullhides are used in the creation of Mystique
Croco®. These large, strong hides are embossed with a crocodile
pattern prior to the hand-tipping process. Mystique Croco® is
available in both whole and half hide sizes and is suitable for all
upholstery applications.
Native is naked aniline, full grain, Italian leather. Native hides
are hand-buffed to create a mottled appearance and matte
surface. It has gorgeous depth of color and a rugged texture that
is reminiscent of the past. While signs of wear will appear with
use, Native is recommended for most upholstery applications, as
it will age beautifully and develop a rich patina over time.
Garrett Newport Club® is produced using premium selection
bullhide. These full grain hides are mineral tanned to create
softness, then re-tanned using vegetable tannins, resulting in wellrounded leather with a beautiful natural grain. Additional dyes are
hand-padded into the surface to create deep, rich colors and a
gorgeous subtle sheen. Newport Club is a luxurious option for all
upholstery applications.
Pearlessence
®
Pearlessence® is full grain, semi-aniline Italian leather with a beautiful
luster. A specially formulated finish with a pearl additive gives
the hides the metallic and pearl appearance. This combination
pearl finish provides durability and increased water resistance.
Pearlessence® is recommended for all upholstery applications.
Shagarrett
Shagarrett is Italian leather featuring a beautiful two-tone texture.
These full sized European cowhides are embossed with a stingray
pattern, with no unsightly plate lines. The dual tone appearance is
achieved with “reverse tipping,” where the darker color appears
in the valleys of the pattern rather than on the tips. Shagarrett is
suitable for all upholstery applications.
w w w. g a r r e t t l e a t h e r. c o m
800.342.7738
P
R
O
D
U
C
T
G
Sierra
Garrett Sierra® is the ultimate in full grain, Italian aniline leather.
Sierra represents leather in its purest form, with very little surface
protection. These extremely supple hides have a soft hand and
a subtle sheen. A rich patina will develop over time. Sierra is
recommended for most upholstery applications.
U
I
D
E
Capelli
Garrett Leather offers three categories of Capelli: natural, stenciled
and specialty. Unlike other leather products, the hair is not removed
from the hides during the tanning process. These hides are used
for rugs, wall hangings, and upholstery.
Natural
Capelli Natural represent genuine cowhide and are not dyed.
Each hide will have varying color patterns, as no two are exactly
alike. The texture, color, and pattern of the hair will be different
from hide to hide.
Torino
Torino is semi-aniline leather produced from European cowhide.
Torino has a rich hand and a welcoming texture. These full-bodied
Italian cowhides have a uniform, pronounced pebble grain that
provides consistency, durability, and superior cutting yields. Torino
has a waterproof finish and is recommended for all upholstery
applications.
Specialty
Stenciled
Vintage
Capelli Stenciled include tiger, leopard, and zebra. These
stenciled patterns are all printed on cowhide. All Capelli Natural
and Capelli Stenciled are sold in whole hides only and average
35 square feet.
Capelli Specialty are created using a variety of different finishing
techniques including embossing, metallic prints, rolling, and laser
cutting.
Wovens
Garrett Vintage® is full grain, pure aniline, Italian leather. Oils
and waxes are used to create a “worn” look and light “pull-up”
effect. Additional dyes are hand-padded on the surface to add a
beautiful mottled effect and to add depth to the final appearance.
Natural marks and variations in each hide represent the true
character of leather. Heat and pressure are used to create the final
gorgeous sheen.
Garrett Wovens® are created using full grain European cowhide.
Garrett Wovens® are 100% vegetable tanned, providing firm
leather that gives the weave a structural integrity that is not
possible with standard, soft upholstery leather. Hand staining
with transparent dyes gives the leather a depth of color that is
unattainable with typical semi-aniline leather finishes. The leather
is then cut into strips, which are edge dyed with a darker color to
define and accentuate the final patterns.
Sheepskin
The strips are weaved into various patterns, including all leather
or leather and fabric combinations. Each pattern is backed with
cotton fabric for extra stability. Over time, these products will age
gracefully and develop a rich patina.
Sheepskin is used primarily for pilot seats in aircraft, automotive
seats, and as throw rugs in finer residences. The fleece on Garrett
Leather’s standard Sheepskin is straight, also called ironed,
unclipped, with a length of approximately ¾”. Many colors are
available in natural curly fleece as well. Sheepskin average nine
square feet.
All Garrett Wovens® are sold in half-yard increments on a 54”
wide roll, providing for the industry’s widest cutting allowance for
applications such as wall coverings.
Tubular Wovens
Garrett Tubular Wovens® are produced from full grain Italian
cowhide. The leather is weaved together into a tube shaped roll,
without any seams. Garrett Tubular Wovens® simply slide over any
tube shaped fixture such as curtain rods, bedposts, lampposts,
door pulls, or hand railings.
Garrett Tubular Wovens® are sold in half-yard increments with a
one-yard minimum. Three sizes are available; small has an inside
diameter of 1”, medium has an inside diameter of 1 3⁄8”, and large
has an inside diameter of 1 7⁄8”.
8 0 0 . 3 4 2 . 7 7 3 8 w w w. g a r r e t t l e a t h e r. c o m
w w w. g a r r e t t l e a t h e r. c o m 800.342.7738
P
R
O
D
U
C
T
G
U
I
D
E
Welt Cord
Wall Panels and Wall Tiles
Braided Welt is made from the same full grain, hand-stained
leather as Garrett Wovens®. A cotton fabric sewing allowance is
intertwined with the leather, providing easy application, superior
strength, and durability. Braided Welt is available in seven colors.
Wall Panels may be specified as either flat or padded. Each panel is custom handcrafted with any
Garrett leather color wrapped around ½” thick routed MDF substrate. Total panel thickness varies
depending on the type of leather selected and whether or not the panels are padded.
Garrett Leather offers pre-made welt cord. Simply specify the
leather and color of your choice. Welt cord is used as trim around
furniture, cushions, and pillows.
All Welt is sold by the yard. Approximate outside diameter of the
cord is 1⁄4”- 3⁄8”. Diameters vary depending on the type of leather
that is requested. The average length between seams is 65”-68.”
Approximate outside diameter of the cord for Braided Welt is 5⁄16”.
All welt cord has a 1⁄2” sewing allowance.
Custom made, leather wrapped Wall Panels are available in a variety of styles, shapes, and
sizes. Create unique patterns of color and texture with over 600 hues and diverse products,
including leather, Wovens, Capelli, and Sheepskin.
Woven Panels are custom handcrafted with Garrett Wovens® wrapped around ½” thick MDF
(medium density fiberboard) substrate. Total thickness is approximately 5⁄8”, depending on the
pattern selected.
Wall Tiles are custom made with any Garrett leather color adhered to the surface of recycled
leather backing. Each tile is approximately 1⁄8” thick, depending on the type of leather selected.
Thread
Garrett Leather offers Tex 70 and Tex 210 bonded nylon thread.
Tex 70: All 64 in-stock colors are sold in four ounce spools.
Matching “G” bobbins are sold by the gross.
Tex 210: All 11 in-stock colors are sold in eight ounce spools.
All thread meets industry standard UV protection of 95 hours.
Shown: P
added Wall Panels in
Pearlessence Silver
Care Products
Tex 70
Tex 210
Leather Accessories
Leather accessories are available in almost any Garrett Leather color. Each piece is handcrafted in
the United States and wrapped with Garrett leather. All accessory orders are made on a custom
order basis. Please allow eight to ten weeks for delivery.
8 0 0 . 3 4 2 . 7 7 3 8 w w w. g a r r e t t l e a t h e r. c o m
Shown: Woven Panels in Garrett Wovens®
Maple/Camel Checkerboard
Proper care and cleaning are critical to the
longevity of leather. Garrett Leather offers a
variety of care products, including Leather
Cleaning Kit, Mild Cleanser, Ink Remover,
Nubuck Care Kit, and 3-in-1 Leather Wipes
to keep your leather looking and feeling as
good as new.
Shown: Wall Tiles in Vintage Buckskin
with standard stitching
Leather Marking Pen
Leather Marking Pens are safe to use on most
of Garrett Leather’s products. Manufacturers
and upholsterers use Leather Marking Pens
to trace patterns and make other notations
on leather before cutting into the hide. All
marks are easily removed with a dry cloth.
Available in orange, yellow, blue, or green
ink colors.
w w w. g a r r e t t l e a t h e r. c o m 800.342.7738
C
U
S
T
O
M
S
E
R
V
I
C
Impress
Perforating
Shown: Dreamcatcher, Teardrop, Sand Dune
Shown: Macro, Hampton, Tri-Star, Micro
Custom Embossing
Cut-to-Pattern
Custom Laser Embossing
Garrett Leather’s automated cutting technology plots and trims hides of leather into custom patterns.
Impress patterns are produced using a combination of heat and pressure to emboss specific
patterns on finished leather. Over 30 patterns are available on most Garrett Leather colors,
in half hide increments. Lead time for all Impress orders is two weeks from the receipt of the
confirmed purchase order and applicable deposit.
Have your corporate logo or any custom design embossed on leather. Send your artwork
with actual dimensions to Garrett Leather for a price quote. A custom mold will be made
and a sample will be provided for a small fee. Orders will be filled upon final approval of
sample. Please allow three weeks for a sample and another three weeks for production.
Laser embossing creates beautiful patterns on leather using heat and computerized lasers.
Send your artwork with actual dimensions to Garrett Leather for a price quote. Upon
request, a sample with your design will be provided for a small fee. Once approved, your
order will begin production. Please allow three weeks for delivery.
E
S
Perforating may be done in 10 different patterns on any type of Garrett leather with
the exception of Wovens, Capelli, and Sheepskin. All perforating is done in half hide
increments with a ten-day lead time.
Garrett Leather will cut your sewing patterns to your specifications. Send your patterns with
quantity requirements for a price quote and lead time. Cut samples of your patterns will be
provided for a small fee. Upon approval of the samples, production will begin.
Skiving
Skiving is a method used to reduce the thickness of leather hides to 0.7mm or 0.8mm.
Any Garrett hide may be skived. Skiving is done with a two-week lead time. A half hide
minimum order is required.
Flameproofing
Shown (L-R): Laser embossing on Capelli Natural, laser embossing on Mystique Cashmere.
8 0 0 . 3 4 2 . 7 7 3 8 w w w. g a r r e t t l e a t h e r. c o m
Many of Garrett Leather’s products are treated during the tanning process to meet
industry flammability requirements. Products that are not treated during the tanning
process may be treated at Garrett Leather’s facility at no additional charge.
Certification is available upon request.
w w w. g a r r e t t l e a t h e r. c o m 800.342.7738
AV E R A G E
H I D E
Whole & Half Hide Area
S I Z E S
DiModa Collection
Hide Area
Average Whole Hide Size
54 sq. ft.
Average Half Hide Size
20 sq. ft.
Average Half Hide Size
27 sq. ft.
L E A T H E R
B E N E F I T S
As a natural product, leather is a rapidly renewable resource.
The raw materials used are a by-product of the meat industry, which would otherwise end up in
landfills. Leather reduces waste and increases the life cycle of the hides.
Maximum Length 88”
Maximum Length 90”
Neck
36” (half hide)
72” (whole hide)
32”
Tail
Wooden tanning drums in Italy.
Capelli Natural Area
Sheepskin Area
Average Whole Hide Size
35 sq. ft.
Average Skin Size
9 sq. ft.
Natural products are used during the tanning process, including vegetable tannins and oils.
Leather finishes are water-based materials.
Remnant water generated by tanneries is directed to special treatment facilities that return it to
the environment cleaner than it originally started.
Neck
Leather has an infinite shelf life. No products are ever lost due to degradation.
Neck
Maximum Length 48”
Maximum Length 84”
15”
65”
25”
Leather does not require harsh cleaning agents, resulting in low maintenance costs and reduced
waste.
Leather is an extremely durable product, lasting up to five times longer than fabric, resulting in
reduced replacement costs, as well as waste.
28”
32”
Tail
Tail
*Measurements shown are average sizes and will vary from hide to hide.
800.342.7738
w w w. g a r r e t t l e a t h e r. c o m
Garrett Leather’s products are
GREENGUARD Indoor Air Quality Certified
w w w. g a r r e t t l e a t h e r. c o m
®
800.342.7738
S
K
Y
R
U
G
S
Where your vision becomes reality.
As a subsidiary of Garrett Leather, Sky Rugs allows you the freedom to
choose from Garrett’s extensive product offerings to produce your own
handcrafted leather floor covering.
Visit skyrugs.com to view the Online Rug Designer!
Custom Rugs
Sky rugs are handcrafted in the U.S.A., utilizing
natural materials. The unique, multiple layer
construction is both durable and comfortable,
providing a soft, luxurious cushion. The corners
are hand-wrapped securely in place, creating a
smooth surface.
Sky rugs feature a protective non-skid rubber
backing for the bottom layer as a non-scratch
surface. The finished thickness ranges from 3⁄8” to
1
⁄2”, depending on the materials.
Shown: Torino Blizzard with no border.
Geometric Rugs
Handcrafted in Italy from premium Italian hides,
Geometric Rugs are available for next day delivery
in 18 combinations of color, pattern, and size.
Five geometric patterns come in black & white and
brown & tan pairings.
Shown: Black and white diamond pattern.
Geometric Rugs feature natural hair-on hides and are
not dyed. Each rug is backed with a spunbonded
95% polypropylene (5% other materials). An antislip finish keeps the rug thin (perfect under furniture)
without the need of an additional pad. The finished
thickness is approximately 3⁄40” to 1⁄10”.
Rug Binding
Sky Rugs offers rug binding in nine different sizes
ranging from two to nine inch widths. Custom widths
are also available. All rug binding is sold by the yard.
Over 600 leather colors and patterns are available.
Shown: (row 1) Saddle Impress pattern on Vintage Elk, Distressed Brass;
(row 2) Newport Club Scotia, Kenya Crepe, Capelli Natural Brindle; (row 3)
Pearlessence Azurite, Luxianna Root Beer, Caressa Red, and Berkshire Black.
800.342.7738 w w w. s k y r u g s . c o m
Available Worldwide
Visit garrettleather.com for a showroom in your area.
800.342.7738 / 716.882.9301
Fax 716.882.9358
www.garrettleather.com
11/15