xSDR Product Family Versatile. Capable. Compact.

Comments

Transcription

xSDR Product Family Versatile. Capable. Compact.
E XTREME S OFTWARE -D EFINED R ADIO
X SDR
xSDR Product Family
Versatile. Capable. Compact.

Use LPFE base card with mix-and-match I/O
cards to support diverse applications:
High-rate
RF-to-packets collect via 1 GbE
or 10 GbE with 10GBASE-T daughter card.
F1/F2
coherent relays.
Demod-remod
Unattended,
systems.
autonomous SIGINT.

Compatible with REDHAWK, X-Midas,
GNU Radio.

Very low SWaP.

High-rate, high-order modulations include:
FSK (2, 4, 8), BPSK, QPSK, SQPSK, 8PSK,
QAM16 – QAM1024.
 Accepts external time/frequency standards for
geo-capable time-tagging.
 Local data logging to uSD card or a USB disk.
RINCON RESEARCH CORPORATION’S XSDR FAMILY OF XILINX™
We care about the details necessary for the success of your
ZYNQ™-based products provides incredible DSP capability in a
mission. To that end, we ensure that our xSDR products are
mission-ready low SWaP platform. Built upon a base and
designed to rigorous specifications, including:
mezzanine card architecture, the xSDR is a versatile,

reconfigurable, cost-effective DSP solution. The family includes

Write-protection controls for all non-volatile memory.
the LPFE basecard and RFXR/IFXR mezzanine cards.

Flexible boot-options: over uSD card, NFS,
Wide input power range: 9-57VDC or PoE Type2.
RAM-disk, etc.
LPFE
Basecard with a Zynq 7030, 7035, or 7045
FPGA/ARM SoC. Can be used without a mezzanine
card for standalone applications.

shielding and is easy to cool.
Accurate and precise time-tagging with external
RFXR 2x2 MIMO RF Transceiver based on the Analog
Devices AD9361. Tunable from 70-6000 MHz with up
to 56 MHz signal bandwidth. The RF front-end has
been carefully engineered to achieve high
performance without the need for external filters or
LNAs.
IFXR
Rugged mechanical design provides excellent
1PPS, NMEA-0183, DC IRIG-B, NTP and 10 MHz
frequency reference. Careful circuit design and
unique firmware let us provide nanosecond-accurate
time tags regardless of the sample rate.
High-performance dual IF Transceiver: 14-bit
500 MSPS ADCs, 16-bit 615 MSPS DACs. Card
includes filters and amplifiers to simplify interfacing
with external receivers and antennas.
ADDRESS
101 N. Wilmot Rd., Ste. 101
Tucson, Arizona 85711
ORDER LINE
520.519.3131
[email protected]
TECH SUPPORT
520.519.3132
[email protected]
INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE ▪ PRODUCTS ARE SUBJECT TO THE RESTRICTIONS OF THE ARMS EXPORT CONTROL ACT
FAX | WEB
520.519.3120
www.rincon.com
▪ V 1.2
xSDR – LPFE DSP BASE CARD
LPFE is a compact Zynq™ based system that enables signal
collection and processing in a standalone package. The Zynq
®
SoC contains a Kintex™-7 FPGA and dual-core ARM
Cortex™-A9 processor, to process data without a host server
or laptop. The embedded Linux APIs, file system, and control
interfaces are common across all our products.
SoC
Xilinx™ Zynq™ Z7030, Z7035, or Z7045
Memory
DDR3-1066, 2GB on FPGA, 512 MB on ARM
I/O
10/100/1000 Base-T Ethernet,
USB 2.0 OTG, 10GBASE-T available
xSDR - RFXR 70 MHZ TO 6 GHZ MIMO
TRANSCEIVER
RFXR provides low-power RF capability for the xSDR family.
Tuning Range
70 MHz to 6 GHz
Gain Adj. Range
60 dB in 1 dB steps
Receiver Return Loss
>10 dB, (typical)
Noise Figure
6 dB (typical below 3 GHz)
Preselectors
4-Band RX preselector
IF Bandwidth
Sample Rate
Run-time configurable, 200 KHz to
56 MHz
Up to 61.44 Msps (I and Q)
ADC/DAC Resolution
12 bits
Transmit Power
+4 dBm, Max
Phase Noise
(1 kHz to 1 MHz
0.11° at 100 MHz, 0.26° at 1 GHz,
0.52° at 2.5 GHz, 1.3° at 6 GHz
Two-Tone SFDR
>72 dB, (typical, 30 dB gain)
RX I/Q Image & DC
Cancellation
> 80 dB, (typical)
Power Consumption
3 Watts, (typical)
xSDR- IFXR DU AL ADC AND D AC
IFXR provides high resolution ADCs and DACs for
IF digitization and direct-sampling applications, from HF
to 1 GHz.
ADC
Dual 14-bit ADC, 200-500 MSPS
ADC Full Scale Input
-3 dBm
ADC Two-Tone IMD
< -80 dBc, (typical)
DAC
Dual 16-bit DAC, 10-615 MSPS
DAC Two-Tone IMD
> 65 dB, (typical)
Filtering
Switchable low-pass filters ADC:
220 MHz, DAC 290 MHz
4-5 watts, (typical)
Power Consumption
ADDRESS
101 N. Wilmot Rd., Ste. 101
Tucson, Arizona 85711
ORDER LINE
520.519.3131
[email protected]
TECH SUPPORT
520.519.3132
[email protected]
INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE ▪ SOME PRODUCTS MAY BE IMPORT RESTRICTED ▪ V 1.2
FAX | WEB
520.519.3120
www.rincon.com

Similar documents