1935-2014 Ram/Dodge Truck Catalog Pre

Transcription

1935-2014
Ram/Dodge Truck Catalog
Automotive Thermal Acoustic Insulation
Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat
•Reduce Road Noise
•Reduce Exhaust Harmonics
•Eliminate Mechanical Noise
•Stop Body Panel Vibration
•Reduce Radiated & Reflected Heat
•Stop Audio System Vibration
Pre-Cut Ready to Install Kits
Year • Make • Model Specific
The Coolest Cars Have QuietRIDE Inside! ™
Under Hood Cover and Insulation Kits
are available for these Vehicles
See AcoustiHood Catalog
Roof Kit
Roof & Quarter Panels
above beltline.
Firewall Insulator
Rear Cab Kit
Fits under dash against the
firewall bulkhead.
Rear Cab Panels below the
beltline.
Door Kit
All Doors
Order Line: 888-777-3410
Tech Line:
209-942-4777
Fax: 209-942-4476
6507 Pacific Avenue Ste. 334 Stockton, CA 95207
Floor Kit
Front Floor, Rear Floor,
Transmission
Hump/ Driveline
Cowl Kit
Panels between the
firewall and front door of
the vehicle.
Everything in One Box to Do the Job Right!
Pre-Cut, Ready To install Kits are Year, Make and Model
Specific and include:
•Dynamat Xtreme
•Heat Shield Barrier Insulation
•Spray Adhesive •Seam Tape
•Illustrated Instructions
9-1-2014
For more information contact us at: [email protected]
©2003-15 •Prices Subject to Change Without Notice
Order Line: 888-777-3410
Tech Line:
209-942-4777
Fax: 209-942-4476
Dodge Truck
1933-2014
Pre Cut Kits Ready to Install
Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat
Introducing a multi-stage, automotive insulation
and sound damping system to give Dodge trucks
the “quiet riding comfort” found in today’s
new cars. AcoustiSHIELD kits are designed on
cur-rent “state-of-the-art” auto acoustic technology, to insulate and control the noise, vibration
and heat in the passenger cabin. Kits are pre-cut
and come with easy-to-follow installation instructions-----everything you need to do the job right.
Turn Your Dodge into “Quiet Riding Comfort”
Stage 1
Sound Damper Pads
Stage 2
Heat Absorber/Barrier Panels
The first stage consists of pre-trimmed, self-adhesive, Sound
Damper Pads, bonded to strategically located trouble spots on
the floor pan and roof of the vehicle to control body panel vibration and noise. These spots are mapped and labeled in detailed
instructions which are included in the kit.
The second stage uses a high-tech absorber/barrier material,
bonded to the body panels, to both sound deaden and insulate
the vehicle from radiant heat penetration from the engine and
road. Each absorber panel is cut to the correct shape and contour and is mapped and labeled in the detailed instructions.
Kits Include:
• Stage 1 Pre-Sized Sound Damper Pads
• Stage 2 Pre-Trimmed Heat Absorber / Barrier
Panels, Spray Adhesive and Sealing Tape
• Complete Illustrated Installation Instruction
Dealer program available. For more information
contact us at [email protected]
©2003-15 Quiet Ride Solutions Prices Subject to Change Without Notice
9-1-2014
Order Line: 888-777-3410
Tech Line:
209-942-4777
Fax: 209-942-4476
Product Application Codes and Price Sheet
Inventory #
Description
Price
1933-35 First Series Dodge Trucks
Inventory #
Description
Price
1947-68 Dodge Power Wagon Trucks
DODGE 3335-TAK
1933-1935 Dodge Truck Complete Kit
559
DODGE 3335-TCK
1933-1935 Dodge Truck Cowl Insulation Kit
99
DODGE 4768-PWAK
1947-1968 Dodge Power Wagon Complete Kit
559
DODGE 3335-TFK
1933-1935 Dodge Truck Floor Insulation Kit
192
DODGE 4768-PWCK
1947-1968 Dodge Power Wagon Cowl Insulation Kit
99
DODGE 3335-TRK
1933-1935 Dodge Truck Roof Insulation Kit
114
DODGE 4768-PWFK
1947-1968 Dodge Power Wagon Floor Insulation Kit
200
DODGE 3335-TRCK
1933-1935 Dodge Truck Rear Cab Insulation Kit
114
DODGE 4768-PWRCK
Universal Acoustishield 2-Door Damper Kit
51
1947-1968 Dodge Power Wagon Rear Cab Insulation
Kit
114
ASU-DSD-2
DODGE 4768-PWRK
1947-1968 Power Wagon Roof Insulation Kit
114
ASU-DSD-2
51
Related Parts For This Truck (Sold Separately)
DODGE 3335-T1
1933-1935 Dodge Truck 1st Series Firewall Insulator
149
DODGE 3335-THKM
1933-1935 Dodge Truck 1st Series Molded Headliner &
Quarter Panels (ABS Plastic)
277
DODGE 4768-PWT
1947-1968 Dodge Power Wagon Flat Firewall Insulator
DODGE 3335-TDP
1933-1935 Dodge Truck 1st Series Door Panels (ABS
Plastic)
146
DODGE 4768-PWIK
1947-1968 Dodge Power Wagon Interior Kit
DODGE 3335-TSP
1933-1935 Dodge Truck 1st Series Cowl/Windshield
Stanchion Set (ABS Plastic)
146
DODGE 4768-PWHKM 1947-1968 Dodge Power Wagon Molded Headliner &
Quarter Panels
277
DODGE 3335-TIK
1933-1935 Dodge Truck 1st Series Interior Kit (ABS)
562
DODGE 4768-PWDP
1947-1968 Dodge Power Wagon Door Panels
146
DODGE 4768-PWSP
1947-1968 Dodge Power Wagon Cowl/Windshield
146
1935-38 Second Series Dodge Trucks
567
1948-53 B Series Dodge Trucks
DODGE 3538-TAK
559
DODGE 3538-TCK
99
DODGE 4853-TAK
559
DODGE 3538-TFK
200
DODGE 4853-TCK
99
DODGE 3538-TRK
114
DODGE 4853-TFK
200
DODGE 3538-TRCK
114
DODGE 4853-TRCK
114
ASU-DSD-2
51
DODGE 4853-TRK
114
ASU-DSD-2
51
DODGE 3538-T2
1935-1938 Dodge Truck 2nd Series Flat Firewall
149
DODGE 3738-T3
1937-1938 Dodge Truck Firewall
212
DODGE 4850-TDP
1948-1950 Dodge Truck Door Panel Set
164
DODGE 3538-TDP
1935-1938 Dodge Truck 2nd Series Door Panels
146
DODGE 4853-T
1948-1953 Dodge Truck Firewall Insulator
244
DODGE 3538-TSP
1935-1938 Dodge Truck 2nd Series Cowl/Windshield
146
DODGE 4853-TH3W-PO
1948-1953 Dodge 3-Window Truck Original Style
Headliner Kit
227
DODGE 3538-TIK
1935-1938 Dodge Truck 2nd Series Interior Kit
539
DODGE 4853-TH5W-PO
1935-1938 Dodge Truck 2nd Series Molded Headliner
& Quarter Panels
277
1948-1953 Dodge 5-Window Truck Original Style
Headliner Kit
227
DODGE 3538-THKM
DODGE 4853-TRCC
1948-1953 Dodge Truck Rear Cab Cover
146
DODGE 4853-TSP
1948-53 Dodge Truck Cowl Side Panel Set
75
DODGE 5153-TDP
1951-1953 Dodge Truck Door Panel Set (ABS
Plastic)
114
1939-47 Dodge Trucks TC And WC Series
DODGE 3947-TAK
559
DODGE 3947-TFK
200
DODGE 3947-TRCK
114
DODGE 3947-TRK
114
DODGE 3947-TCK
99
ASU-DSD-2
51
149
DODGE 3947-T
1939-1947 Dodge Truck Molded Firewall Insulator
212
DODGE 3947-TCOE
1937-1947 Dodge Truck Cab Over Engine Firewall
212
DODGE 3947-THKM
1939-1947 Dodge Truck Molded Headliner & Qtr Pnls
277
DODGE 3947-TDP
1939-1947 Dodge Truck Door Panel Set (ABS Plastic)
146
DODGE 3947-TSP
1939-1947 Dodge Truck Cowl/Windshield Stanchion Set
146
DODGE 3947-TIK
1939-1947 Dodge Truck Interior Kit (ABS)
562
©2003-15 Quiet Ride Solutions
Prices Subject to Change Without Notice
See new catalog for
1964-70 Dodge A-100 Trucks and Vans
For more information visit: www.quietride.com or contact us at [email protected]
Inventory #
Description
Price
Inventory #
1954 C Series Dodge Trucks
Description
Price
1994-02 Dodge Trucks
DODGE 5400-TAK
1954 Dodge Truck Complete Acoustic Kit
559
DODGE 9402-TAK
1994-2002 Dodge Truck Regular Cab Complete Kit
410
DODGE 5400-TCK
1954 Dodge Truck Cowl Insulation Kit
99
DODGE 9402-TCK
1994-2002 Dodge Truck Regular Cab Cowl Insulation Kit
39
DODGE 5400-TFK
1954 Dodge Truck Floor Insulation Kit
200
DODGE 9402-TFK
1994-2002 Dodge Truck Regular Cab Floor Insulation Kit
200
DODGE 5400-TRCK
1954 Dodge Truck Rear Cab Insulation Kit
114
DODGE 9402-TRCK
1994-2002 Dodge Truck Regular Cab Rear Cab Kit
129
DODGE 5400-TRK
1954 Dodge Truck Roof Insulation Kit
114
ASU-DDBIK-2
Universal 2 Door Damper/Barrier Insulation Kit
65
ASU-DSD-2
51
DODGE 5460-T
195
DODGE 5400-TH3W-PO
1954 Dodge 3 Window Truck Headliner Original Style
227
DODGE 5400-TH5W-PO
1954 Dodge 5 Window Truck Headliner
227
DODGE 5400-TDP
1954 Dodge Truck Door Panels (ABS Plastic)
114
DODGE 5400-TSP
1954 Dodge Truck Side Cowl Panel Set (ABS Plastic)
75
DODGE 5400-TRCC
1954 Dodge Truck Rear Cab Cover (ABS Plastic)
146
DODGE 5400-TIK
1954 Dodge Truck Interior Kit (ABS)
562
1955-60 C Series Dodge Trucks
DODGE 5560-TAK
1955-1960 Dodge Truck Complete Acoustic Kit
559
DODGE 5560-TCK
99
DODGE 5560-TFK
200
DODGE 5560-TRCK
114
DODGE 5560-TRK
114
ASU-DSD-2
51
DODGE 5460-T
195
DODGE 5560-LWTHK
1955-1960 Dodge LrgWindow Truck Headliner
227
DODGE 5560-TH5W-PO
1955-1960 Dodge 5 Window Truck Headliner
227
DODGE 5560-TDP
1955-1960 Dodge Truck Door Panel Set (ABS Plastic)
114
DODGE 5560-TSP
1955-1960 Dodge Truck Side Cowl Panel Set
75
DODGE 5560-TRCC
1955-1960 Dodge Truck Rear Cab Cover
146
DODGE 5560-TIK
1955-60 Dodge Truck Interior Kit (ABS)
562
1994-02 Dodge Trucks (Extended Cab)
DODGE 9402-XTAK
1994-2002 Dodge Truck Extended Cab Complete Kit
500
DODGE 9402-XTCK
1994-2002 Dodge Truck Ext. Cab Cowl Kit
37
DODGE 9402-XTFK
1994-2002 Dodge Truck Extended Cab Floor Kit
232
DODGE 9402-XTRCK
1994-2002 Dodge Truck Extended Cab Rear Cab Kit
195
ASU-DDBIK-2
62
2003-14 Dodge Trucks (Regular Cab)
DODGE 0314RC-TAK
2003-14 Dodge Truck Regular Cab Complete Kit
434
DODGE 0314RC-TCK
2003-14 Dodge Truck Regular Cab Cowl Insulation Kit
65
DODGE 0314RC-TFK
2003-14 Dodge Truck Regular Cab Floor Insulation Kit
200
DODGE 0314RC-TRCK
2003-14 Dodge Truck Regular Cab Rear Cab Kit
129
ASU-DDBIK-2
65
2003-14 Dodge Trucks (Extended Cab)
DODGE 0314-XTAK
2003-14 Dodge Truck Extended Cab Complete Kit
575
DODGE 0314-XTCK
2003-14 Dodge Truck Extended Cab Cowl Insulation Kit
65
DODGE 0314-XTFK
2003-14 Dodge Truck Extended Cab Floor Insulation Kit 246
DODGE 0314-XTRCK
2003-14 Dodge Truck Extended Cab Rear Cab Kit
169
ASU-DDBIK-2
65
2003-14 Dodge Trucks (Quad Cab)
DODGE 0314QC-TAK
2003-14 Dodge Truck Quad Cab Complete Kit
575
DODGE 0314QC-TCK
2003-14 Dodge Truck Quad Cab Cowl Insulation Kit
65
DODGE 0314QC-TFK
2003-14 Dodge Truck Quad Cab Floor Insulation Kit
246
DODGE 0314QC-TRCK
2003-14 Dodge Truck Quad Cab Rear Cab Kit
169
ASU-DDBIK-4
128
DODGE 6171-TAK
559
DODGE 6171-TCK
99
DODGE 6171-TFK
200
DODGE 6171-TRCK
114
DODGE 6171-TRK
114
DODGE 0614MC-TAK
2006-14 Dodge Truck Mega Cab Complete Kit
624
ASU-DDBIK-2
65
DODGE 0614MC-TCK
2006-14 Dodge Truck Mega Cab Cowl Insulation Kit
65
DODGE 0614MC-TFK
2006-14 Dodge Truck Mega Cab Floor Insulation Kit
298
DODGE 0614MC-TRCK
2006-14 Dodge Truck Mega Cab Rear Cab Kit
169
ASU-DDBIK-4
128
DODGE 6171-T
195
2006-14 Dodge Trucks (Mega Cab)
DODGE 7293-TAK
519
DODGE 7293-TCK
57
DODGE 7293-TFK
200
DODGE 7293-TRCK
114
DODGE 7293-TRK
114
ASU-DDBIK-2
65
Dodge Truck Headliner Kit & Door Panels
1948-1953 Dodge Truck
3 Window Headliner Kit
P/N: DODGE 4853-TH3W/PO
P/N: DODGE 4853-TH5W/PO
1951 and 1952 trucks have two rear window sizes:
Large Window--30” wide by 11-1/2” tall
Small Window--26” wide by 10-1/4” tall
Specify width when you order.
Cowl Panels
P/N: DODGE 4853-TSP
Hardware (29) Capped
Trim Fasteners (Head
15/32-Length 1/4)
Door Panels
P/N: DODGE 4850-TDP
Door Panels
P/N: DODGE 5153-TDP
Molded to fit using the
highest quality materials available.
9-1-2014
Order Line: 888-777-3410
Tech Line:
209-942-4777
Fax: 209-942-4476
1954 Dodge Truck
P/N: DODGE 5400-THK
1954 Dodge Truck
Rear Cab Cover Kit
P/N: DODGE 5400-TRCC
1954 Dodge Truck Door Panel Kit
P/N: DODGE 5400-TSP
Rear Window Size is 32” wide and 12” tall.
9-1-2014
Order Line: 888-777-3410
Tech Line:
209-942-4777
Fax: 209-942-4476
1955-60 Dodge Truck
BigWindow Headliner Kit
1955-60 Dodge Truck
Small Window Headliner Kit
P/N: DODGE 5560-LWTHK
P/N: DODGE 5560-SWTHK
Rear Window 36” wide and 12” tall
Rear Window 30” wide and 12” tall
Hardware (29) Capped Trim Fasteners
(Head 15/32-Length 1/4)
1955-60 Dodge Truck Door Panel Kit
Door Panel Kit
P/N: DODGE 5560-TRCC
9-1-2014
Order Line: 888-777-3410
Tech Line:
209-942-4777
Fax: 209-942-4476
1933-35 Dodge Truck
Complete AcoustiShield Insulation Kit
DODGE 3335-TAK
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
Complete Kits Include
Door Damper/Barrier Kit
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Other Dodge Products for this Vehicle
(Sold Separately)
ABS Headliner
DODGE 3335-TDP
DODGE 3335-THKM
DODGE 3335-TIK
DODGE 3335-TSP
DODGE 3335-T1
1935-38 Dodge Truck
Dodge 3538-TAK
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
See Catalog
this vehicle.
DODGE 3538-THKM
DODGE 3335-T1
(Sold Separately)
DODGE 3538-TDP
DODGE 3538-TSP
DODGE 3538-T1
DODGE 3538-T2
1939-47 Dodge Truck
Dodge 3947-TAK
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
See Catalog
this vehicle.
(Sold Separately)
DODGE 3947-THKM
1939-68 Dodge Power Wagon
Dodge 3968-PWAK
Cowl Kit
Floor Kit
Roof Kit
See Catalog
this vehicle.
Rear Cab Kit
(Sold Separately)
DODGE 4768-PWTDP
DODGE 4768-PWTHKM
DODGE 4768-PWT
1948-53 Dodge Truck (3-Window)
DODGE 4853-TAK3W
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
See Catalog
this vehicle.
(Sold Separately)
DODGE 4853-TRCC
Rear Cab Cover
ABS Headliner-3 Window
DODGE 4853-THK3W
DODGE 4853-T Firewall Insulator
DODGE 4853-TAK5W
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
See Catalog
this vehicle.
(Sold Separately)
DODGE 4853-TRCC
Rear Cab Cover
1954 Dodge Truck (3-Window)
DODGE 5400-TAK3W
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
See Catalog
this vehicle.
(Sold Separately)
1954 Dodge Truck (5-Window)
DODGE 5400-TAK3W
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
See Catalog
this vehicle.
(Sold Separately)
DODGE 5560-TAK3W
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
See Catalog
this vehicle.
Firewall Insulator for this Vehicle
(Sold Separately)
1955-60 Dodge Truck (LargeWindow)
DODGE 5560-TAKLW
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
See Catalog
this vehicle.
ABS Headliner--Large Window
(Sold Separately)
1961-71 Dodge Truck
DODGE 6171-TAK
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
(Sold Separately)
See Catalog
this vehicle.
1972-93 Dodge Truck
Dodge 7293-TAK
Cowl Kit
Rear Cab Kit
See Catalog
this vehicle.
Floor Kit
Roof Kit
1994-2002 Dodge Truck (Regular Cab)
DODGE 9402-TAK
Cowl Kit
Floor Kit
Rear Cab Kit
See Catalog
this vehicle.
Roof Kit
Cowl Kit
(Extended Cab)
DODGE 9402-XTAK
Floor Kit
Rear Cab Kit
See Catalog
this vehicle.
Roof Kit
Cowl Kit
(Regular Cab)
DODGE 0314-TAK
Floor Kit
Rear Cab Kit
Cowl Kit
(Extended Cab)
DODGE 0314-XTAK
Floor Kit
Rear Cab Kit
Cowl Kit
Roof Kit
(Quad Cab)
DODGE 0314-QCTAK
Floor Kit
Rear Cab Kit
Door Kit
(Mega Cab)
DODGE 0314-MCTAK
Floor Kit
Roof Kit
A Roof to Road Solution to Control
Passenger Cabin Noise, Vibration and Heat
TM
AcoustiSHIELD Product Description
AcoustiShield is a two-stage thermal acoustic automotive insulation
product designed to control Noise, Vibration and Heat—the three
major issues that affect passenger cabin comfort. Kits include pre-cut,
ready-to-install Dynamat Xtreme® damper pads and HeatShield
Barrier Insulation panels which are packaged separately for easy
installation. Kits come with uniquely illustrated installation sheets,
spray adhesive and seam tape.
Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor,
Doors and Body Panels, which includes the seat divider, package tray and
rear wheel wells. The installation of a complete AcoustiShield kit
typically will reduce passenger cabin noise by 12 to 17 decibels. To put
this in perspective, a 10-decibel reduction is a 50 percent reduction
in noise that the human ear can easily detect. Barrier insulation will
reduce radiant heat by as much as 25 degrees.
AcoustiShield is a Two-Stage Process
Stage-One of the AcoustiShield process is the application of
small pre-cut Dynamat Xtreme® damper pads and strips to auto
body sheet metal to greatly reduce the vibration and noise
produced by these panels from entering the passenger cabin.
Quick Link
Stage-Two of the AcoustiShield process is the application of
pre-cut HeatShield Barrier Insulation panels to the auto body sheet
metal to encapsulate any remaining vibration/noise and to
thermally insulate the vehicle.
©2003-15 Quiet Ride Solutions LLC.
“AcoustiSHIELD”, AcoustiHOOD and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.
Expanded NVH Reference Information:
Cars and trucks make and/or absorb noise, vibration and heat (NVH) from multiple
directions--including internal and external air-borne noise, structure-borne noise as well as
radiant heat. NVH factors to consider:
•Engine NVH travels back from the front of the vehicle through the firewall and cowl.
•Wheel well trunk and rear body panel NVH travels forward through the seat divider and
package tray panels.
•Roadway radiant heat, often exceeding 140 degrees, rises through vehicle floor pans.
•Rumbling performance exhaust systems and transmission/drive line harmonics also rise
through vehicle floor pans.
•Direct heat from the sun penetrates the roof of the vehicle.
All of these influences “Apex” in the middle of the passenger cabin at ear level.
Add the noise produced by the sound system; the air rushing through the vents from the
HVAC system; and a normal conversation builds into a “shouting match” between the driver
and passenger to overcome the “harmonic drone” of vehicle mechanics.
AcoustiShield Photo Gallery
Typical Cowl Panel Sound Dampening and Thermal Barrier Insulation.
Typical Trunk Floor Sound Dampening and Thermal Barrier Insulation.
Typical Floor Panel Sound Dampening and Thermal Barrier Insulation.
Typical Roof Panel Sound Dampening and Thermal Barrier Insulation.
Typical Body Panel Sound Dampening and Thermal Barrier Insulation.
Ford Motor Company
Trademarks
are used under license to
QuietRide Solutions LLC.
MOPAR, JEEP, DODGE, HEMI, PLYMOUTH, RAM, SRT,
CHRYSLER and related logos, vehicle model names and trade
dress are trademarks of Chrysler Group LLC used under licenseby QuietRide Solutions LLC. © 2014 Chrysler Group LLC.
Made Right---Fit Right---Look Right
OEM Original Products
Firewall Insulator products are
pre-cut and ready to install with
standard OEM accessory and
mounting holes punched for
restoration applications. Each unit
has period correct insulation.
ABS Leather Grain Material
“Ultra High Definition”
Vinyl Rubber
Firewall Insulators are also
available without holes for
aftermarket HVAC systems and
Street Rod and Custom installs.
Street Rod Firewall Insulator
Direct Sheetmetal
Absolute Sheetmetal
Quick Link
ABS “Chicken Track” Material
Product Description—
ABS “Chicken Track Grain”
Early Ford Original Equipment Firewall Insulators
Production Period—FOMOCO: 1928 through 1948
Production Period--Some Early Mopar Vehicles
FOMOCO cars and trucks used a
unique “chicken track” texture on
their firewall insulator covers and
related products from 1928 through
1948. Quiet Ride has faithfully
reproduced this famous texture
and offers it exclusively on its ABS
molded firewall insulators and truck
headliners, cowl and door panels.
Each insulator product is molded
with an ABS material and readyto-install with Heat Shield Thermal
Barrier insulation, factory stock
accessory holes and mounting pin
locations punched.
Ford style steel mounting pins are
not included but are available for
separate purchase as needed.
ABS Firewall Cover
Chicken Track Grain Material
Each insulator product is
molded from an “out of the car”
original firewall for contour and
accuracy.
Year-Make-Model Specific.
Firewall Insulators can be ordered without holes for
custom applications.
ABS “Leather Grain”
Original Equipment Firewall Insulators
Production Period—GM and MOPAR: 1926 through 1976
ABS Firewall Cover
Most OEMs used a leather grained
firewall cover on their cars and
trucks from 1926 through 1965.
Each insulator product is molded
with ABS material and ready-toinstall with factory stock accessory
holes and mounting pin locations
punched.
Kits does not include mounting
pins. Quiet Ride has an assortment
of “universal” mounting pin styles
available as needed.
Mounting pins are not included but
are available for separate purchase as
needed.
Leather Grain Material
accuracy.
“Ultra High Definition Vinyl Rubber“
for General Motors Cars and Ford Cars and Trucks
Production Period—GM: 1964 to present
Production Period—FOMOCO: 1964 to present
FOMOCO and General Motors
began using a rubber based firewall
material in 1964 with the
introduction of the Mustang,
Chevelle family and Camaro Cars.
Quiet Ride molds these products using a “Ultra High Definition” vinyl
rubber. It comes ready to install
with a Heat Shield Thermal Barrier
insulation pad. Factory stock accessory holes and mounting pin locations are punched.
Kits include appropriate period
mounting pins.
accuracy.
Product Description—Street Rod Firewall Insulators
Direct Sheetmetal
Absolute Sheetmetal (formerly Bitchin Products)
Production Period--GM: 1936 through 1972
Street Rod Firewall Insulators are
based on the steel after-market
firewalls that are manufactured by
Direct Sheetmetal and Absolute
Sheetmetal (formerly Bitchin Products) to stop the heat and noise generated by large engine installed in
smaller, older vehicles. Each
insulator product is molded with
ABS Leather grain material to fit the Each Street Rod Firewall Insulator
product is molded from a steel
steel engine and transmission recess
“like a glove.” All street rod products mold provided by the manufacturer
to achieve contour and accuracy.
are year, make and model specific,
and come ready to install with a
double layer of Heat Shield Thermal
Barrier insulation pad.
There are no mounting holes or
accessory cut-outs so customers can
achieve that “smooth” look in the
engine bay and passenger
compartment.
Customer must decide method of
installation. Quiet Ride makes a
Street Rod mounting pin kit,
available separately.
Thermal Insulation Types
•General Motors Cars and Trucks
•Ford Cars and Trucks
•MOPAR Cars and Trucks
Black Fiberglass Insulation
Typically used in vehicles 1949 through 1977
•ABS Firewall Insulators
Heat Shield Barrier Insulation
Typically used in vehicles 1928-48 and
Vinyl Rubber Firewalls 1964-present
•Street Rods
•Custom Firewalls
Concours Show Quality
Authentically Correct---“Fit like a Glove”---Easy to Install
All QRS Products, Materials and Craftsmanship
Meet or Exceed OEM Quality Standards
No customer has ever reported losing judged points on our firewall products.
Firewall Insulators--A Historical Perspective
The Firewall Insulator is the first line of defense against automotive Noise, Vibration and Heat
that is generated in the engine bay of the vehicle.
QRS manufactures more than 600 firewall products for antique, classic, custom and street rod
cars and trucks. The company has developed these products based on “out of car” original insulator pads that have been supplied by its customers. QuietRide Firewalls Insulators are exact
reproductions of OEM products.
Most firewall insulators made between 1928 and the mid-1960s were constructed with an oil
impregnated cardboard cover in combination with a number of insulation materials. In 1964
General Motors and Ford Motor Company began using a “spray-on” rubber material bonded to
a thin layer of “shody” insulation.
All of the company’s firewall products are vacuum form molded to fit the firewall and transmission contours exactly. They are digitized and manufactured on its Flow Water Jet Cutting System
for accurate fitting. Each firewall cover is backed with period correct insulation which could
include a black fiberglass or HeatShield barrier insulation.
Firewall Colors and “Sheen”
Just a word about the “look” of your old firewall in comparison to a new one--you may may note
that the new firewall does not look the same as your original--because of the “sheen.” The
firewall insulator in a car built in the 1930s or 40s is now at least 70-80 years old and is dirty and
dingy. When the vehicle came off the assembly line, all of its component parts were crisp, clean
and sparkling fresh.
With few exceptions, firewall insulators were black when they came from the factory. There were
some exceptions in the General Motors product line from 1933 through 1941 in which the
firewall insulators were a “mocha brown” color. The firewall color would typically match the
color of your clutch, brake and accelerator pedal rubber pads.
6507 Pacific Avenue--Ste 334 Stockton, CA 95207
Order Line: 888-777-3410
Tech Line (209) 942-4777
Fax (209) 942-4476
www.quietride.com
©2003-15 Quiet Ride Solutions LLC.
“AcoustiSHIELD” and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.
Fasteners
and Screws
Firewall Mounting Pin Options
For Older Cars and Trucks
American Cars and Trucks used a wide variety of mounting pins, clips, buttons and
screws to attach the firewall insulator to the interior of the steel firewall bulkhead.
Clean up and reuse your original mounting pins if you have them. We offer the
fol-lowing mounting pins and information based on what we have been able to find
avail-able.
Early Ford Firewall Mounting Pins
These all steel firewall mounting pins are a reproduction of the originals. They are
available in a 3/4 inch length (Long) and in a 1/2 inch length (Short). The long pins
work best for the early production cars and trucks. The Short pin works best for the
1942-48 cars and 1940-47 Trucks. The long pins may have been used in Ford cars as
late as 1954. The short pins may have been used in Ford Trucks through the mid 1950s.
Ford 3541-MPL 1935-41 Ford Firewall Mounting Pin-Long ........................... $3
Ford 4147-MPS 1941-47 Ford Firewall Mounting Pin-Short ........................... $3
GM Firewall Mounting Plugs
General Motors started using a plastic firewall mounting plug to attach the insulator
in the mid 1950s--1955 for Trucks and 1957 for Cars. These plugs are still used in
GM vehicles today.
GM 5500-MP 1955 to Present General Motors Mounting Plug ........................ $3
Street Rod Mounting Pins
With this new mounting pin kit, you can weld up your firewall mounting holes and
install any of our insulators for that “smoothie look.” Kit includes nine pin-sets and
installation instructions.
SRMP Street Rod Firewall Mounting Pin Kit ................................................. $34
Universal Mounting Pins
If your original firewall mounting pins are missing or damaged beyond repair, these
universal pins may be a solution. They are a plastic “Christmas tree” type pin that
will fit most 5/16 inch holes. Kit includes 10 pins.
UMPS-10 Universal Mounting Pin Set .............................................................. $20
Universal Wire Cap
A variety of car and truck manufacturers in the 1930s used a wire cap retainer to
mount the firewall insulator. These are still available in a Long (1/2 inch) and Short
(1/4 inch) variety and have a 1/2 inch button head that can be painted. To match the
firewall color.
UWC-MPL Universal Wire Cap Mounting Pin Long ....................................... $1
UWC-MPS Universal Wire Cap Mounting Pin Short ........................................ $1

1935-2014 Ram/Dodge Truck Catalog Pre

Transcription

Similar documents

Johnny Tremain by Esther Forbes Objectives

annual report 2012 - YMCA of Dodge County

locally - The Blade

45 Plateau Incentive Program

YMCA of Dodge County

Newsletter - Fort Dodge Community School District

0615 Newsletter Cueter - Cueter Chrysler Jeep Dodge

UPCOMING EVENTS - Cowtown Mopars

Activity Kit - Draw Flynn`s Nose The Magistrate just can`t get Flynn`s

33 Series Sweeperweb