MarlinFirearms.com 1

Transcription

MarlinFirearms.com
1
2
MarlinFirearms.com
LEVER-ACTION TRADITION
4-5
LEVER-ACTION RIFLES
6-13
BOLT-ACTION RIFLES
14-15
RIMFIRE RIFLES
16-23
ACCESSORIES
24-25
SPECIFICATIONS
25-31
THE FINEST MATERIALS
We start with premium grade steel carefully chosen for its superior rigidity
and hardness. Our stocks are crafted of high-grade American walnut.
A TRULY SUPERIOR DESIGN
Ours is the strongest lever-gun receiver ever conceived. Its substantial sidewalls
are cut out only where necessary for loading and ejection. For rock-solid reliability,
heat-treated solid-steel forgings are used for the receiver and trigger guard.
YOUR SAFETY LEVER.
AT MARLIN, SAFETY IS OUR TOP PRIORITY. EVERY MARLIN LEVER ACTION HAS THESE KEY FEATURES BUILT IN:
3
1
1
4
See page 25 for complete model listing & specifications.
2
3
TWO-PIECE FIRING PIN:
Ensures the primer cannot be struck unless
the rifle is in the fully locked position. The rear
section of the pin drops out of alignment with the
front until the locking bolt is fully engaged.
TRIGGER BLOCK:
This device prevents the trigger from being
pulled unless the lever is fully locked up.
The hammer can be locked in the half-cock
position as a convenient safety.
4
2
TRADITIONAL HALF-COCK HAMMER POSITION:
4
HAMMER-BLOCK CROSSBOLT SAFETY:
A positive, highly visible safety mechanism that
prevents the hammer from striking the firing
pin – even when the trigger is pulled.
LEVER ACTION:
TRADITION
THE ACCURACY ADVANTAGE
Accuracy starts in the materials and the craftsmanship. Marlin uses the finest materials to create the strongest receivers. And our
skilled gunsmiths adhere to the tightest manufacturing tolerances to ensure outstanding results. The first time you print a group
with one of our lever guns is an eye-opening experience. You’re shooting precision machinery, and it shows.
MODEL 336C
MODEL 39A
MODEL 1895
OUR LEVER-ACTION LEGACY
It’s the classic American long gun, a tool of history and just as much
the oldest continuously produced rifle in the world. Marlin is the first
a symbol of the Old West as the six-shooter. The Marlin brand is
name in lever action, producing classics like our 1894 carbines, 1895
synonymous with lever action repeaters. It’s a rich tradition, with a
rifles and our top-of-the-line 336 series. Each is made from premium
heritage stretching back to the Model 1881, our first centerfire, and the
grade steel to create the strongest lever-gun receiver ever built. The
Model 1891, our first rimfire. In fact, Annie Oakley trusted the Model 1891
action of the lever is ultra-smooth for rapid follow-up shots. And for rock-
®
above all others to demonstrate her legendary marksmanship. Today,
solid reliability, heat-treated solid-steel forgings are used for the receiver
hunters and sportsmen alike are still demonstrating their marksmanship
and trigger guard plate. Marlin is always working to improve these
with Marlin rifles, including the Model 39A, still in production today as
timeless rifles with new technology.
MarlinFirearms.com |
5
IDEAL FOR:
MODEL 336BL
America’s favorite lever action keeps advancing. This time with a Big Loop Lever for faster,
more efficient chambering and ejection with gloves on, plus striking laminated woodwork
that improves weather resistance and adds aesthetic appeal. Its 18 ½” barrel is handy in the
brush, and the full-length magazine tube gives you six rounds of 30-30 Win. assurance at
the moment of truth. Six-shot tubular magazine.
MODEL 336W
This hunting machine is chambered for 30-30 Win. and features a 20” Micro-Groove ®
barrel with adjustable rear sight and ramp with hood front sight. Plus, its receiver is drilled
and tapped for scope mounts. The walnut-finished laminate stock and fore-end have cut
checkering and comes with a padded nylon sling. This carbine is also available with a
factory-mounted and boresighted 3–9x32mm scope shown above (Order #70521). Six-shot
tubular magazine.
6
LEVER ACTION:
336 CENTERFIRE RIFLES
AMERICA’S MOST FAMOUS FAMILY OF DEER SLAYERS
The Model 336 family are icons of the deer woods. And this year, we’re celebrating their standard-bearer with the Model 336C
special limited edition. Each rifle here is chambered in 30-30 Win. or 35 Rem., and features Micro-Groove ® rifling, ensuring that
tags will be filled, mouths fed and the reign of America’s ultimate woods rifle family will continue going strong.
MODEL 336C LIMITED EDITION & 336SS
It is the flagship of our Model 336 family and one of the most popular hunting rifles in North America. Now
we’re giving our industry standout its due with the Model 336C Limited Edition. Highlights of this special
limited edition include a 24-Carat gold Marlin Horse and Rider engraved on the left, and scroll work on the
Engraved 24-Carat
Gold Marlin
Horse and Rider
right; “Limited Edition” stamped on the barrel; a gold-plated trigger; and an eye-catching, B Grade walnut
stock with fleur-de-lis checkering. Featuring a 20” barrel with Micro-Groove ® rifling, richly blued finish and
30-30 Win. or 35 Rem. chambering, it is a timeless embodiment of dependability, accuracy and handsome
looks. Also available, the Model 336SS is constructed primarily of stainless steel for corrosion-resistance
and long-term durability.
MODEL 336XLR
This is the ultimate long-range evolution of our traditional lever action Model 336. Used in conjunction with
today’s spire-point flexible-tip ammunition and a 24” barrel, this rifle turns the 30-30 Win. cartridge into a
250+ yard deer dropper. For weather resistance, all major components are crafted of stainless steel, and the
woodwork is two-tone laminate. It has a full pistol grip, swivel studs and cut checkering. Along with fully
adjustable sights, it’s drilled and tapped for scope mounts. Five-shot tubular magazine.
SUPERIOR RECEIVER:
Our clean, flat, solid-top receiver keeps out debris
and foul weather, and is drilled and tapped for a scope
mount. Its true side ejection equally accommodates
both right-and left-handed shooters.
REAR SIGHTS:
Our adjustable semi-buckhorn
folding rear sights.
7
IDEAL FOR:
MODEL 1895SBL
Acquire and fire with a quick-pointing 18½” barrel, and cycle rapidly through six rounds
of 45-70 Gov’t. with the Big Loop Lever. It’s as rugged as the tradition that it’s made from,
with the modern advancements of stainless steel metal components and a weatherresistant black/grey laminated stock.
MODEL 444
The legendary speed and smooth operation of the Marlin lever action in the hard-hitting
444 Marlin – a cartridge that generates nearly 1½ tons of muzzle energy. Its 22” barrel
makes it both handy and well-balanced.
8
LEVER ACTION:
BIG-BORE CENTERFIRE RIFLES
XS GHOST RING SIGHTS
A sighting system optimized for rapid target acquisition, XS Ghost Ring Sights are the ultimate for close quarters and heavy-cover
situations. Simply point and shoot with pinpoint accuracy. (Offered on 1895SBL only).
MODEL 1895 & 1895CB
For hunters who appreciate the fit and function of a classic 45-70 firearm.
The Model 1895 has a 22” barrel, while the Model 1895 CB has a 26” barrel. And
each comes with Ballard-style rifling and handsome American black walnut stock.
MODEL 1895GBL
Easy to lever with gloves when hunting in cold weather country, our Big Loop Lever
innovation makes the lever action 45-70 Gov’t. even better. It features a two-tone
brown laminate stock for enhanced weather resistance and distinctive looks.
MODEL 1895G & 1895GS
Lightweight and hard-hitting, these two lever action carbines are the rifle of choice for
many professional hunting guides. The Model 1895G has richly blued steel. The Model
1895GS has all major metal parts machined from stainless steel for corrosion resistance.
9
IDEAL FOR:
MODEL 1894 COWBOY
Tapered octagon barrel. Ballard-style rifling. It looks the part for the open range, but
beneath the richly blued finish, classic black walnut stock and fore-end, beats the
receiver of a precision-tuned modern firearm. The Model 1894 Cowboy has a 20”tapered
octagon barrel and is chambered for 45 Long Colt. Ten-shot tubular magazine.
10
LEVER ACTION:
1894 CENTERFIRE & COWBOY RIFLES
MARLIN DEVELOPED THE FIRST FLAT-TOP, SIDE-EJECT RECEIVER
and has been leading the way ever since. We took the original look and feel, then combined it with our best rifle technology to
create a gun that looks like history and shoots like the future.
MODEL 1894 & 1894C
The Model 1894 is an elegant carbine chambered for pistol calibers. Its handy size
is punctuated by a quick-pointing, straight-grip stock design and Old West-styled,
adjustable semi-buckhorn sights. Also available is the Model 1894C. Chambered
for 357 Mag./38 Special, the Model 1894C is the natural sidekick to your revolver of
the same caliber. Both feature finely checkered American black walnut stocks and
fore-ends. Ten-shot tubular magazine (Model 1894) and nine-shot tubular magazine
(Model 1894C).
1894 - 2014
CELEBRATING
ONE HUNDRED TWENTY YEARS
11
IDEAL FOR:
MODEL 308MX
The traditional look of blued steel and walnut woodwork, with the outstanding longrange ballistics of the 308 Marlin Express offering. Equipped with a 22” barrel and fully
adjustable sights. Receiver is drilled and tapped. Five-shot tubular magazine.
MODEL 338MX & 338MXLR
Classic good looks with the long-distance, big game dropping power of our 338 Marlin
Express. The Model 338MX has a 22” barrel, blued steel metalwork and American
walnut woodwork. And the Model 338MXLR has a 24” barrel, weather-resistant twotone laminate stock and stainless steel components.
12
LEVER ACTION:
KINETIC ENERGY IS THE FANCY WAY OF SAYING
“HITS LIKE A RUNAWAY FREIGHT TRAIN.”
308 MARLIN EXPRESS
That’s what the 308 Marlin Express does. These deluxe long-range Marlin rifles get the job done time and time again on big
game like elk, moose and bear. Rounds fly flat, fast and accurate, then hit with a devastating punch. They’re the only 300-yard
chamberings for tubular-magazine lever actions. And only Marlin makes them.
SPIRE-POINT FLEXIBLE-TIP BULLETS
: Providing a higher ballistic coefficient and dramatic velocity increases over
traditional round-nose bullets, they ride safely in tubular magazines thanks to flexible polymer tips.
(Scope not included)
MODEL 308MXLR
With an awesome 24” barrel of bullet-stabilizing, powder-burning steel, this super-tuned rifle platform stretches
the maximum lethal distance from our breakthrough 308 Marlin Express chambering. For weather resistance, all
major components are crafted of stainless steel, and the stock and fore-end are a distinctive two-tone laminate.
Its extremely rugged stock has a full pistol grip and pre-installed sling swivel studs. Other features include side
ejection, a solid-top receiver that’s tapped for scope mounts and fully adjustable sights. Five-shot tubular magazine.
THE 308 MARLIN EXPRESS VS. THE 308 WIN.
308 Win.
165 grain BTSP:
Energy: 2641 ft/lb
3000
ENERGY (lb.-feet)
308 Marlin Express
160 grain Evolution:
Muzzle Vel: 2660 fps
TRAJECTORY (inches)
308 Marlin Express
160 grain Evolution:
Energy: 2513 ft/lb
2500
2000
1500
1000
0500
0 0 0
1 0 0
DISTANCE (yards)
2 0 0
3 0 0
4 0 0
308 Win.
165 grain BTSP:
Muzzle Vel: 2685 fps
+15
0
-15
-30
-45
0 0 0
1 0 0
2 0 0
3 0 0
4 0 0
DISTANCE (yards)
13
IDEAL FOR:
4
6
2
3
1
ANATOMY OF A BEST-IN-CLASS BOLT ACTION
1
SOFT-TECH® RECOIL PAD
4
2
PILLAR BEDDING
5
A common aftermarket upgrade, this custom touch is added to
provide the accuracy of a hand-built rifle. Steel pillars are fitted
in the stock to reinforce the mounting area and provide a more
solid, consistent fit.
3
14
BUTTON-RIFLED BARREL
The button rifling process creates the smoothest finish of any
barrel manufacturing technique. This refined, ultra-consistent
launch surface for your bullets means improved accuracy.
Button-rifled barrels are also exceptionally strong. All feature
a target crown to enhance shot-to-shot precision, and sixgroove rifling.
PRO-FIRE® TRIGGER SYSTEM
This innovative, user-adjustable trigger system was developed
in house to provide the ultimate in crispness and safety. It has
virtually zero creep and can be set to break as low as 2½ lbs.
The external Pro-Fire release mechanism prevents movement
of the trigger until it is fully depressed.
FULLY ENCLOSED BOLT SHROUD WITH COCKING INDICATOR
Protects the shooter in the case of a pierced primer or case
failure. An easy-to-see cocking indicator is readily visible under
the bolt shroud whenever the rifle is cocked.
Our proprietary design, the Soft-Tech pad dramatically lessens
felt recoil for enhanced shooting comfort. It’ll improve your
shooting from the bench and in the field.
6
FLUTED BOLT
Marlin’s fluted bolt design decreases surface area and resulting
drag, making the X7’s bolt one of the smoothest actions available.
BOLT ACTION:
X7™ SERIES
CUSTOM-GRADE ACCURACY COMES STANDARD
All of today’s best bolt-action technologies come together in the tightest group of hunting rifles ever offered in their class. In case
you’re thinking accuracy isn’t everything, it has all those other things, too. Like Marlin’s 140-year heritage reliability and superior
craftsmanship. With cutting-edge features such as our Pro-Fire ® Adjustable Trigger, a button-rifled barrel with target-style crown,
a pillar-bedded stock, Soft-Tech ® recoil pad and more, the X7 Series makes a big statement wherever game animals and competing
rifles call home. Capacity for all models is 4+1.
5
MODEL X7™& X7Y
Super-tough black synthetic, long-action Model X7 chamberings include 25-06
Remington, 270 Win. and 30-06 Springfield. The short-action Model X7 is available
in 223 Remington, 7mm-08 Remington and 308 Win. To serve youth and shooters
of small stature, there’s the compact Model X7Y, chambered for 243 Win., 7mm-08
Remington and 308 Win. For the complete package, the Model X7 is available with
a 3-9x40mm scope mounted and bore-sighted, available in both standard youth
(243 Win., 7mm-08 Remington and 308 Win.) and adult (243 Win., 270 Win. and
30-06 Sprg.) chamberings.
MODEL X7VH
A varmint configuration of our famous X7, this model is equipped with a 26” heavy
barrel, and chambered in 223 Remington, 22-250 Remington and 308 Win.
15
XT PISTOL GRIP
THUMB AND TRIGGER SAFETY
REDUCED BOLT FORCE
ERGONOMIC STOCK
ERGONOMIC STOCK
THUMB AND TRIGGER SAFETY
This ergonomic stock is designed for easy
handling and improved fit and feel. This stock
shoulders quickly and comfortably, helping to
create textbook form round after round.
In addition to the standard thumb safety,
the XT ™ Series features a trigger safety
incorporated into the Pro-Fire ® Adjustable
Trigger, which prevents the trigger from being
pulled until the trigger safety is fully depressed,
for an added level of safety and confidence.
XT PISTOL GRIP
This pistol grip features a slight palm swell for
a rich feel and solid grip. By improving the
shooter’s overall grip on the rifle, we are able
to improve handling, shouldering, shooting
form and ultimately accuracy.
16
XT PRO-FIRE
ADJUSTABLE TRIGGER
REDUCED BOLT FORCE
Through improved trigger technology, we are
able to reduce the overall bolt force release, for
easier ejection and faster chambering.
XT PRO-FIRE®
ADJUSTABLE TRIGGER
Marlin’s user-adjustable trigger system
allows the shooter to customize the trigger
pull weight between 3 and 6 lbs., while
providing the ultimate crispness and
virtually zero creep. Everyone’s finger
works a little differently, and the Pro-Fire ®
Adjustable Trigger accommodates those
differences to ensure a crisp, smooth pull
every time for better accuracy.
RIMFIRE:
XT™ SERIES
LOADED WITH THE LATEST AND BEST TECHNOLOGIES
The most complete family of rimfire rifles ever, our Marlin XT™ series take the lead for accuracy, reliability and safety. For a smooth
trigger pull, the XT™ series features the Pro-Fire ® Adjustable Trigger. Each barrel has Micro-Groove ® rifling to ensure pinpoint
accuracy on the range or in the field. Our XT™ line also includes our latest innovation, the XT-22 Youth series, two models designed
specifically for younger shooters.
MODEL XT-22RO COMBO
MARLIN’S EXCLUSIVE MICRO-GROOVE® TECHNOLOGY
Micro-Groove ® rifling has become synonymous with rimfire accuracy. Introduced in 1953 by Marlin, the MicroGroove ® barrel continues to be revolutionary in terms of accuracy, creating a rimfire bore with many more lands
and grooves than conventional rifling (see images below). This system results in less bullet distortion when fired.
Less distortion plus a better gas seal lead to greater accuracy and tighter groups. Micro-Groove ® rifling is only
available from Marlin.
Conventionally Rifled Barrel
Micro-Groove ® Rifled Barrel
17
IDEAL FOR:
MODEL XT-22MTR
The XT-22MTR models feature a 12-shot tubular magazine, with a blued barrel and
black synthetic stock with swivel studs, and full pistol grip. Includes adjustable rear
sight and ramp front sight.
MODEL XT-22MVSR
This black synthetic stock masterpiece includes a 4 and 7-shot magazine, stainless
barrel, thumb safety, Pro-Fire ® Adjustable trigger, rear and front scope bases only.
18
RIMFIRE:
XT™ & XT™-22 SERIES
MARLIN’S PREMIER BOLT-ACTION RIMFIRE RIFLES
These bolt-action 22s are reliable, accurate and fun to shoot. They come in several different models, with 4 or 7-shot detachable
magazines or 12-shot tube magazines; synthetic, hardwood or laminated stocks; ramp sights, hood sights or fiber-optic sights.
All of them have Marlin innovations such as the Pro-Fire ® Adjustable Trigger and Micro-Groove ® rifling. The XT-22 series comes
chambered in 22 Short, 22 Long, 22 Long Rifle or 22 Win. Mag Rifle (WMR).
MODEL XT-22TSR
Featuring a tubular magazine, stainless barrel, thumb safety, Pro-Fire ® Adjustable
trigger, adjustable semi-buckhorn rear folding sight, and high visibility orange front
sight this 22 is ready to go. Available with a black synthetic stock with swivel studs
and full pistol grip.
MODEL XT-22RO COMBO
Each XT-22RO Combo features a 7-shot magazine, blued barrel, thumb safety,
Pro-Fire ® Adjustable trigger, and comes with 3–9x32mm scope factory mounted
and bore-sighted.
MODEL XT-22
With a Monte Carlo walnut-finished hardwood stock, the XT-22 features a 7-shot
magazine, blued barrel, thumb safety, Pro-Fire ® Adjustable trigger, adjustable rear
sight and ramp front sight.
19
IDEAL FOR:
MODEL XT-17V
A tool for every task... And for varmints, the right tool is the XT-17V chambered in 17 HMR.
It sends a polymer-tipped bullet rocketing down range at 2,500+ feet per second with a laserflat trajectory. Our XT Pro-Fire® Adjustable Trigger produces an extremely consistent trigger
pull with an ultra-clean break. Included are 4-shot and 7-shot magazines. The rugged walnutfinished hardwood Monte Carlo stock comes with sling swivel studs. The receiver is drilled,
tapped and grooved for your choice of convenient scope mounting options. Model XT-17VO
available with a factory-mounted and bore-sighted 3-9x32mm scope.
MODEL XT-22YR
A full-size rifle doesn’t fit in a youth’s hands the same way it fits in an adult’s, making it
harder to learn the correct grip and shooting form. Marlin’s latest innovation is the XT-22
Youth Series. It’s the first series of rifles designed exclusively for young shooters. It
features a shorter stock, shorter trigger reach, smaller grip and a higher comb; making it
easier for a youth to acquire and hold the proper sight picture. These rimfires also feature
a reduced bolt opening force, for smoother loading and to prevent misfeeds. Our Pro-Fire ®
Adjustable Trigger adjusts the trigger pull, too. Pass on your love of shooting and hunting
to the next generation, and give them the right start with this line of rimfire rifles.
20
RIMFIRE:
XT™-22 / XT™-17
MODEL 795
MODEL 70PSS
MARLIN IS PROUD TO SUPPORT PROJECT APPLESEED
Project Appleseed and The Revolutionary War Veterans Association’s mission is to teach every American our shared heritage
and history, as well as traditional rifle marksmanship skills using our Model 795.
Visit www.appleseedinfo.org to learn more.
MODEL 795SS
Accuracy. Reliability. Lightweight. This rugged, economical 22 autoloader features an
18” barrel, 10-shot nickel-plated magazine, and an automatic “last-shot” bolt hold-open.
Its black, fiberglass-reinforced synthetic stock is virtually indestructible, with molded-in
checkering and swivel studs. With sleek lines in a corrosion-resistant, stainless steel
finish, this all-season favorite is fitted with an adjustable open rear sight and a ramp
front sight. Our Model 795 is also available in a blued steel finish.
MODEL 795 COMBO
Synthetic, scoped combo. 10-shot nickel magazine. 4x20mm scope mounted and bore-sighted.
MODEL 70PSS
This stainless steel, semi-auto tack driver packs down compactly in its case, making
it the perfect companion for any activity where space is at a premium. You can take
it apart and put it back together in a matter of seconds. It features stainless steel
construction, a rugged fiberglass-filled black synthetic stock and a 7-shot magazine.
Padded case with built-in flotation comes with
every 70PSS for easy carrying and storage.
21
IDEAL FOR:
MODEL 60SB
The added durability of stainless steel paired with a traditional
walnut-finished laminated stock.
MODEL 60SN
The classic Model 60 with a rugged, black synthetic stock
featuring molded-in checkering and swivel studs. A 4x20mm
scope included with Model 60SN w/Scope (70651).
22
RIMFIRE:
MODEL 60
TRUSTED ABOVE ALL OTHERS, MORE THAN 11 MILLION TIMES
After 54 years and more than 11 million rifles sold, the Model 60 is one of the world’s most popular 22 rimfires – and an American
classic in every way. Sleek lines cover the handsome, walnut-laminated stock, while the 19” Micro-Groove® rifled barrel has a
precision-crowned muzzle to split hairs like no other. Enhancing its appeal, the tubular magazine holds up to 14 Long Rifle rounds,
while the cross-bolt safety and the manual bolt include our automatic “last shot” bolt hold-open. From young shooters entering the
sport, to veterans needing a straight-shooting
companion, choose the 22 rimfire trusted more than 11 million times. And counting.
MODEL 60
One of the most popular 22s in the world. Available in Monte Carlo walnut-finished
laminated stock.
REALTREE®
Logos Approved for Approved
Collateral, Promotional, and
Royalty-Based Packaging Use Only
Realtree Xtra® Brown™
Realtree Hardwoods®
Realtree Xtra® Grey™
MODEL 60C
Realtree Hardwoods HD®
The world’s most popular 22 rifle is also available with synthetic Monte Carlo stock
covered with a Realtree ® Hardwoods™ pattern.
Realtree Hardwoods® Snow™
Realtree Hardwoods Green™
Realtree Hardwoods® Blaze™
MODEL 60SS
Realtree Hardwoods Green HD®
Our famous Model 60 with the versatility of a stainless steel finish and a two-tone
laminated stock.
page 5
23
ACCESSORIES
XT™ SYNTHETIC STOCKS
The ergonomic XT™ Synthetic Stock is designed for easy handling and improved fit and feel. You will find this stock shoulders quickly
and comfortably, helping to create textbook form round after round. Stock grip features a slight palm swell for a rich feel and solid grip.
By improving the shooter’s overall grip on the rifle, we were able to improve handling for ultimate accuracy.
XT™ SYNTHETIC YOUTH STOCK
*Made to work on Model XT & 900 Series Firearms
- Research and measurements conducted over a 4 year period.
- Dimensions are from 50th percentile from large samplings of 12-year old youths.
- Dimensional changes to classical stock dimensions based on fit differences:
Length of Pull
Drop at Comb
- 2”
+1/4”
Grip Circumference -5/8”
Trigger Reach
-1/2”
71952
(Shorter arms)
(Shorter head height, improved sight picture)
(Smaller hands and fingers)
71953
(Shorter fingers)
MODEL 60 WOOD STOCKS
Order #
Description
Finish
MSRP
71953
Youth Synthetic Stock
Matte Black
$50
71952
Adult Tubular Fed Synthetic Stock
Matte Black
$50
71951
Adult Magazine Fed Synthetic Stock
Matte Black
$50
71950
Adult Bull Barrel with Beaver Tail
Fore-End Synthetic Stock
Matte Black
$50
NEW
71948
Model 60 - Laminate Wood
Desert
Satin
$99
NEW
71949
Model 60 - Laminate Wood
Green Mountain
Satin
$99
- Convert your Model 60 into a thing of beauty.
- Available in Desert Camo Satin and Green Mountain Camo Satin laminates.
NEW 71948
NEW 71949
MAGAZINES
Order #
Description
Caliber
Capacity
Finish
MSRP
71900
707246: Fits Bolt-Actions and Pre-1996 Self-Loaders
22LR
7
Blue
$12.80
71901
707046: Fits Post-1996 Self-Loaders
(With Last Shot Hold-Open Feature)
22LR
7
Nickel
$14.00
71902
707135: Fits Bolt-Actions and Post-1988 Self-Loaders
22LR
10
Nickel
$16.40
71903
704046: Fits Discontinued Bolt-Actions
#80, #780, #20 and #25
22LR
7
Blue
$15.70
71920
705146: Fits All 22 WMR and 17 HMR Bolt-Actions
22 WMR /17
HMR
7
Blue
$13.70
71921
22 WMR /17
HMR
4
Blue
$12.90
MAGAZINES
71922
22 WMR /17
HMR
7
Nickel
$15.30
• 4 , 7 and 10-shot magazines to fit all magazinefed Marlin bolt-actions
71923
22 WMR /17
HMR
4
Nickel
$14.50
to change without notice.
24 Specifications
24 subject
MarlinFirearms.com
71920
71902
71922
71903
71900
• 2 2LR, 22WMR and 17 HMR chambering
• Available in blue and nickel finishes
ACCESSORIES & SPECIFICATIONS
SCOPE MOUNTING BASES
Order #
Description
Finish
MSRP
71930
707146: Scope Mounting Bases for 900 & XT Series Rimfire Bolt-Actions
Blue
$9.80
71931
707156: Scope Mounting Bases for 900 & XT Series Rimfire Bolt-Actions
Nickel
$9.80
71930
336W, 336W w/Scope
336SS
336XLR
336BL
71931
336 CENTERFIRE RIFLES
Model
336Y
336C
NEW 336C Limited Edition
Caliber
30-30 Win. (70524)
30-30 Win. (70501)
Limited Edition
30-30 Win. (70504)
35 Remington (70506)
30-30 Win. (70520)
30-30 Win w/Scope (70521)
30-30 Win. (70510)
30-30 Win. (70530)
30-30 Win. (70502)
Capacity
5-shot tubular magazine
(spire point bullets)
6-shot, full length tubular
magazine
Action
Lever action; side
ejection; solid-top
receiver; satin blued
finish; hammer block
safety
Lever action; side
ejection; solid-top
receiver; deeply blued
metal surfaces; hammer
block safety
Lever action; side ejection;
solid-top receiver; satin
blued finish; hammer block
safety
solid-top stainless steel
receiver, barrel, lever,
trigger guard plate,
magazine tube and
loading gate; hammer
block safety
stainless steel receiver,
fluted bolt, barrel, lever,
magazine tube and loading
gate; hammer block safety
Lever action with
big-loop finger lever; side
ejection; blued steel receiver;
hammer block safety
Stock
Walnut finished cutcheckered laminate
with pistol grip; tough
Mar-Shield finish; blued
steel barrel band with
swivel; padded nylon
sling; rubber butt plate
American black walnut
pistol-grip stock with
fluted comb; cut
checkering; rubber
rifle butt pad; tough
Mar-Shield finish; blued
steel barrel band with
swivel stud
Walnut finished cutcheckered laminate with
pistol grip; tough Mar-Shield
finish; blued steel barrel
band with swivel; padded
nylon sling; rubber butt plate
fluted comb; cut
checkering; rubber rifle
butt pad; nickel-plated
swivel studs
Black/grey laminated
hardwood pistol-grip stock
with fluted comb; cut
checkering; deluxe recoil
pad; nickel-plated swivel
studs
Brown laminated hardwood
pistol-grip stock with fluted
comb; cut checkering; rubber
rifle butt pad; blued swivel
studs
Barrel
16¼" with MicroGroove® rifling (12
grooves)
20" with Micro-Groove®
rifling (12 grooves)
20" with Micro-Groove®
20" stainless steel with
Micro-Groove® rifling
(12 grooves)
24" stainless steel barrel
(6 grooves)
18½" blued with Micro-Groove®
30-30 Win. - 1:10"
35 Remington - 1:16"
1:10"
1:10"
1:12"
1:10"
Twist
Rate
1:10"
Sights
Adjustable semi-buckhorn folding rear sight, ramp front sight with brass bead and Wide-Scan hood. Solid-top receiver tapped for scope mount; offset hammer spur (right or left hand)
for scope use. 336W w/Scope - Available with a factory mounted and boresighted 3-9x32mm scope and mounts.
Length
33¼"
Length
of Pull
12 ¾”
Approx.
Weight
6½ lbs.
7 lbs.
7 lbs.
MSRP
$515
$850 (70501)
$610 (70504) (70506)
$515 (70520)
$565 (70521)
38½"
38½”
38½"
42½"
37"
7 lbs.
7½ lbs.
7½ lbs.
$749
$932
$641
13 3/8”
25
SPECIFICATIONS
BIG BORE CENTERFIRE RIFLES
Model
1895
1895G
1895GS
1895GBL
444
1895CB
1895SBL
Caliber
45-70 Gov't. (70460)
45-70 Gov't. (70462)
45-70 Gov't. (70464)
45-70 Gov't. (70456)
444 Marlin (70540)
45-70 Gov’t. (70480)
45-70 Gov’t. (70478)
Capacity
4-shot tubular
magazine
4-shot tubular
magazine
4-shot tubular
magazine
6-shot, full-length
tubular magazine
5-shot tubular
magazine
6-shot
6-shot, full-length
tubular magazine
Action
Lever action; side
ejection; solid-top
metal surfaces;
hammer block safety
Lever action; side
ejection; solid-top
metal surfaces;
hammer block safety
Lever action; side
ejection; stainless steel
magazine tube and
block safety
Lever action with
big-loop finger lever;
side ejection; solid-top
metal surfaces;
hammer block safety
Lever action; side
ejection; solid-top
metal surfaces;
hammer block safety
Lever action; side
ejection; solid-top
metal surfaces;
hammer block safety
Lever action with bigloop finger lever; side
ejection; stainless steel
magazine tube and
block safety
Stock
fluted comb; cut
butt pad; tough MarShield finish; swivel
studs
straight-grip stock; cut
checkering; ventilated
recoil pad; tough MarShield finish; swivel
studs
recoil pad; tough
Mar-Shield finish;
swivel studs
American pistol-grip
two tone brown
laminate stock; cut
recoil pad; tough MarShield finish;
swivel studs
pistol grip stock with
fluted comb; cut
butt pad; tough MarShield® finish;
swivel studs
recoil pad; tough MarShield finish; swivel
studs
Black/grey laminated
hardwood pistol-grip
stock with fluted comb;
cut checkering; deluxe
recoil pad; nickelplated swivel studs
Barrel
22" with deep-cut
Ballard-type rifling
(6 grooves)
18½" with deep-cut
(6 grooves)
18½" with deep-cut
(6 grooves)
18½" with deep-cut
(6 grooves)
22” with deep-cut
(6 grooves)
26” with deep-cut
(6 grooves)
18½” stainless steel
barrel with deep-cut
(6 grooves)
Twist
Rate
1:20"
1:20"
1:20"
1:20"
1:20"
1:20"
1:20”
Sights
Adjustable semi-buckhorn folding rear sight, ramp front sight with brass bead and Wide-Scan hood.
Solid-top receiver tapped for scope mount; offset hammer spur (right or left hand) for scope use.
Length
40½"
37"
37"
37"
Length
of Pull
XS Ghost Ring Sights
with Hi-Viz® front post;
Scout Scope Mount
40½"
44½"
37”
13 3/8”
Approx.
Weight
7 lbs.
7 lbs.
7 lbs.
7 lbs.
7 lbs.
8½ lbs.
8 lbs.
MSRP
$696
$701
$837
$734
$669
$840
$1,070
1894 CENTERFIRE & COWBOY RIFLES
Model
1894 Cowboy
1894
1894C
Caliber
45 Colt (70444)
44 Remington Magnum/44 S&W Special (70400)
357 Mag./ 38 Special* (70410)
Capacity
Action
Lever action with squared finger lever; side ejection; deeply
blued metal surfaces; solid-top receiver; hammer block safety
Lever action with squared finger lever; side ejection;
deeply blued metal surfaces; solid-top receiver;
hammer block safety
Lever action with squared finger lever; side
ejection; deeply blued metal surfaces; solid-top
receiver; hammer block safety
Stock
Straight-grip American black walnut; rubber butt plate; tough
Mar-Shield finish; blued steel fore-end cap
American black walnut straight-grip stock; cut
checkering; rubber rifle butt pad; tough Mar-Shield
finish. Blued steel fore-end cap; swivel studs
American black walnut straight-grip stock; cut
checkering; rubber rifle butt pad; tough MarShield finish; swivel studs
Barrel
20" tapered octagon with deep-cut Ballard-type rifling (6 grooves)
20" with deep-cut Ballard-type rifling (6 grooves)
18½" with deep-cut Ballard-type rifling (6 grooves)
Twist
Rate
1:38"
1:38"
1:16"
Sights
Adjustable Marble’s semi-buckhorn rear sight, Marble’s carbine
front sight. Solid-top receiver tapped for scope mount; offset
hammer spur (right or left hand) for scope use.
Adjustable semi-buckhorn folding rear sight, ramp front sight with brass bead and Wide-Scan hood. Solidtop receiver tapped for scope mount; offset hammer spur (right or left hand) for scope use.
Length
37½"
37½"
Length
of Pull
36"
13 3/8”
Approx.
Weight
6½ lbs.
6½ lbs.
6 lbs.
MSRP
$1,041
$729
$729
26 Specifications
26 subject
MarlinFirearms.com
SPECIFICATIONS
308 MARLIN EXPRESS
Model
308MXLR
308MX
338MX
338MXLR
Caliber
308 Marlin Express (70491)
Capacity
Action
Lever action; side ejection; stainless
steel receiver, barrel, lever, trigger
guard plate, magazine tube and loading
gate; hammer block safety; fluted bolt
Lever action; side ejection; solid-top
receiver; deeply blued metal surfaces;
hammer block safety
Lever action; side ejection; solid-top
receiver; deeply blued metal surfaces;
hammer block safety
Lever action; side ejection; solid-top receiver;
deeply blued metal surfaces; hammer block
safety
Stock
Black/grey laminated hardwood pistolgrip stock with fluted comb, cut
checkering, deluxe recoil pad; nickelplated swivel studs
American black walnut pistol-grip stock; cut
checkering; rubber rifle butt pad; tough MarShield finish; swivel studs
American black walnut pistol-grip stock;
cut checkering; rubber rifle butt pad; tough
Mar-Shield® finish; swivel studs
American black walnut pistol-grip stock; cut
checkering; rubber rifle butt pad; tough MarShield® finish; swivel studs
Barrel
24" stainless steel barrel (6 grooves)
22" (6 grooves)
22” (6 grooves)
24” (6 grooves)
Twist
Rate
1:12”
Sights
Adjustable semi-buckhorn folding rear sight; ramp front sight with brass bead and WideScan hood. Solid-top receiver tapped for scope mount; offset hammer spur (right or left
hand) for scope use.
Length
42½"
40½"
40½”
Length
of Pull
42½”
13 3/8”
Approx.
Weight
7½ lbs.
7¼ lbs.
7½ lbs.
7¾ lbs.
MSRP
$905
$686
$683
$900
X7™ SERIES
Model
X7 Long Action
X7 Short Action
X7Y Short Action
Caliber
25-06 Remington (70380)
270 Win. (70381)
30-06 Springfield (70382)
243 Win. (70384)
7mm-08 Remington (70385)
308 Win. (70386)
243 Win. (70387)
7mm-08 Remington (70388)
308 Win. (70389)
Capacity
4+1
223 Remington
5+1
243 Win.
7mm-08 Remington 4+1
308 Win.
4+1
Action
}
22-250 Remington (70336)
308 Win. (70337)
223 Remington
5+1
22-250 Remington
4+1
308 Win.
Centerfire bolt-action, Pro-Fire® Adjustable Trigger; fluted bolt; two-position safety; red cocking indicator
Stock
Pillar-bedded black synthetic with raised cheek piece and Soft-Tech® recoil pad
Barrel
22” precision button rifled, target crown (6 grooves)
Twist Rate
X7VH
1:10"
243 Win.:1:10”
223 Remington: 1:9”
7mm-08 Remington: 1:9.5”
308 Win.: 1:10”
Sights
26” heavy barrel (6 grooves)
243 Win.: 1:10”
7mm-08 Remington: 1:9.5"
308 Win.: 1:12"
223 Remington: 1:9”
22-250 Remington: 1:14”
308 Win: 1:12”
No sights provided. Scope base included.
Length
42½"
42"
41"
46”
Length
of Pull
13 ¼”
13 ¼”
12 ¼”
13 ¼”
Approx.
Weight
6½ lbs.
6½ lbs.
6½ lbs.
7¾ lbs.
MSRP
$403
$403
$403
$409
27
SPECIFICATIONS
X7™ SERIES SYNTHETIC WITH SCOPE
Model
X7 Long Action
X7 Short Action
X7Y Short Action
Caliber
270 Win. (70326) | 30-06 Sprg. (70327)
243 Win. (70325)
243 Win. (70322) | 7mm-08 Remington (70323) | 308 Win. (70324)
4+1
Capacity
Action
Centerfire bolt-action, Pro-Fire Adjustable Trigger; fluted bolt; two-position safety; red cocking indicator
Stock
Pillar-bedded black synthetic with raised cheek piece and Soft-Tech® recoil pad
Barrel
22” precision button rifled, target crown (6 grooves)
®
1:10”
Twist Rate
243 Win.: 1:10”
7mm-08 Remington: 1:9.5”
308 Win.: 1:10”
1:10”
Available with 3-9x40mm scope mounted and bore-sighted. Adjustable open rear sight, ramp front sight.
Sights
Length
42½”
42”
41”
Length of Pull
13 ¼”
13 ¼”
12 ¼”
Approx
Weight
6 ½”
MSRP
$457
$457
$457
XT™-22 SERIES
Model
XT-22
XT-22R
XT-22SR
XT-22RO Combo
XT-22RZ
XT-22VR
Caliber
22 LR (70759)
22 LR (70779)
22 LR (70801)
22 LR (70778)
22 LR (70763)
22 LR (70835)
Capacity
7-shot magazine
7-shot magazine
7-shot nickel plated
magazine
7-shot magazine
7-shot magazine
7-shot magazine
Action
Blued bolt-action,
thumb safety, red cocking
indicator
Blued bolt-action,
indicator
Stainless steel bolt-action,
indicator
Blued bolt-action,
indicator
Blued bolt-action,
indicator
Blued bolt-action,
indicator
Stock
Monte Carlo walnutfinished hardwood
with swivel studs, full pistol
grip, tough
Mar-Shield finish
Black synthetic stock with
palm swell, full pistol grip,
molded in swivels, and
stippled grip areas
stippled grip areas
stippled grip areas
stippled grip areas
Black synthetic Beaver-tail
stock with palm swell, full
pistol grip, molded in
swivels, and stippled grip
areas
Barrel
22" blued barrel with
(16 grooves)
(16 grooves)
22" stainless steel barrel
with Micro-Groove® rifling
(16 grooves)
(16 grooves)
22" blued barrel with MicroGroove® rifling (16 grooves).
Threaded muzzle (1/2" x 28
thread) for use with
suppressors, includes
thread protector.
22" blued heavy varmint
barrel with Micro-Groove®
rifling (16 grooves) and
recessed muzzle
Twist Rate
1:16
1:16
1:16
1:16
1:16
1:16
Sights
Adjustable rear sight, ramp
front sights. Receiver
grooved for scope mount,
drilled and tapped for
scope bases.
Adjustable rear sight, ramp
front sights. Receiver
drilled and tapped for
scope bases.
Adjustable semi-buckhorn
folding rear sight, ramp
front sight with high
visibility orange front sight
post, cutaway wide-scan
hood. Receiver grooved for
scope mount and drilled
and tapped for
scope bases.
3-9x32 scope and rings
factory mounted and boresighted. Receiver grooved
for scope mount, drilled
and tapped for
scope bases.
Includes rear and front
scope bases only.
Receiver grooved for
scope mount, drilled and
tapped for
scope bases.
Includes rear and front
scope bases only.
Receiver grooved for
scope mount, drilled and
tapped for
scope bases.
Length
41"
41"
41"
41"
41"
41"
Pro-Fire® Adjustable
Trigger
Length
of Pull
13 ¼”
Approx.
Weight
6 lbs.
6 lbs.
6 lbs.
6½ lbs.
6 lbs.
7 lbs.
MSRP
$239
$229
$339
$269
$269
$239
28 Specifications
28 subject
MarlinFirearms.com
SPECIFICATIONS
XT™-22 SERIES (CONTINUED)
Model
XT-22TR
XT-22TSR
XT-22M
XT-22MR
XT-22MTR
XT-22MVSR
XT-22MTSL
XT-22MTW
Caliber
22 S, L, LR (70821)
22 S, L, LR (70823)
22 WMR (70791)
22 WMR (70783)
22 WMR (70859)
22 WMR (70831)
22 WMR (70855)
22 WMR (70851)
Capacity
Tubular magazine
holds 25S, 19L, 17LR
Tubular magazine
holds 25S, 19L, 17LR
4-shot and 7-shot
magazines
4-shot and 7-shot
magazines
12-shot tubular
magazine
4-shot and 7-shot
magazines
12-shot tubular
magazine
12-shot tubular
magazine
Action
Blued bolt-action,
thumb safety, red
cocking indicator
Stainless steel boltaction, thumb
safety, red cocking
indicator
Blued bolt-action,
thumb safety, red
cocking indicator
Blued bolt-action,
thumb safety, red
cocking indicator
Blued bolt-action,
thumb safety, red
cocking indicator
safety, red cocking
indicator
safety, red cocking
indicator
Blued bolt-action,
thumb safety, red
cocking indicator
Trigger
Barrel
Black synthetic stock with palm swell, full
pistol grip, molded in swivels, and stippled
grip areas
Monte Carlo
walnut-finished
hardwood
with swivel studs,
full pistol grip,
tough
Mar-Shield finish
Black synthetic stock with palm swell, full pistol grip,
molded in swivels, and stippled grip areas
Monte Carlo
laminated two-tone
brown hardwood
with nickel-plated
swivel studs and
rubber rifle butt
pad, tough MarShield finish
Monte Carlo
genuine black
walnut with swivel
studs, full pistol
grip, and classic
cut checkering,
rubber rifle butt
pad, tough MarShield finish
Barrel
22" blued barrel
with MicroGroove®
22" blued barrel
with MicroGroove® rifling
(20 grooves)
22" blued barrel
(20 grooves)
22" stainless steel
heavy varmint
barrel with MicroGroove® rifling
(20 grooves) and
recessed muzzle
22" stainless steel
(20 grooves)
22" blued barrel
(20 grooves)
Includes rear and
front scope bases
only. Receiver
grooved for scope
mount, drilled and
tapped for scope
bases.
Adjustable semi-buckhorn folding rear
sight, ramp front sight with high visibility
orange front sight post, cut-away WideScan hood. Receiver grooved for scope
mount and drilled and tapped for scope
bases.
22" stainless steel
(16 grooves)
1:16
Twist Rate
Sights
22" blued barrel
(20 grooves)
Adjustable rear
sight, ramp front
sights. Receiver
grooved for scope
mount, drilled and
tapped for scope
bases.
Adjustable semibuckhorn folding
rear sight, ramp
front sight with high
visibility orange
front sight post,
cutaway WideScan hood.
Receiver grooved
for scope mount
and drilled and
tapped for scope
bases.
Adjustable open rear sight, ramp front sights. Receiver grooved
for scope mount, drilled and tapped for scope bases.
Length
41”
Length
of Pull
13 ¼”
Approx.
Weight
6 lbs.
6 lbs.
6 lbs.
6 lbs.
6 lbs.
6½ lbs.
6 lbs.
6 lbs.
MSRP
$235
$299
$269
$259
$269
$345
$379
$345
29
SPECIFICATIONS
XT™-22 YOUTH SERIES
Model
XT-22YR (Youth)
Model
XT-22YR (Youth)
Caliber
22 Long Rifle (70691)
Twist Rate
1:16
Capacity
7-shot magazines Single Shot Adapter
Sights
Adjustable open rear sight, ramp front sights. Receiver grooved for
scope mount, drilled and tapped for scope bases.
Action
Blued bolt-action, thumb safety, red cocking indicator
Length
33½"
Trigger
Length of Pull
11 ¼”
Stock
Measured youth black synthetic stock, full pistol grip, molded in
swivels, and stippled grip areas. (12" length of pull)
Approx. Weight
4½ lbs.
Barrel
16¼" blued barrel with Micro-Groove® rifling (16 grooves)
MSRP
$239
XT™-17 BOLT ACTION
Model
XT-17R
XT-17V
XT-17VR
XT-17VO
XT-17VSL
Caliber
17 HMR (70701)
17 HMR (70712)
17 HMR (70721)
17 HMR (70713)
17 HMR (70723)
Capacity
4-shot and 7-shot magazines
4-shot and 7-shot nickel-plated
magazines
Action
Blued bolt-action, thumb safety,
red cocking indicator
Stainless steel bolt-action,
indicator
Trigger
Stock
Black synthetic stock with palm
swell, full pistol grip, molded in
swivels, and stippled grip areas
Monte Carlo walnut-finished
hardwood with swivel studs, full
pistol grip, tough Mar-Shield
finish
Black synthetic Beaver-tail
stock with palm swell, full pistol
grip, molded in swivels, and
stippled grip areas
hardwood with swivel studs, full
pistol grip, tough Mar-Shield
finish
Monte Carlo laminated grey/
black hardwood stock with
nickel-plated sling swivel studs,
full pistol grip, rubber rifle butt
pad, tough Mar-Shield finish
Barrel
22" blued
sporter barrel
22" blued heavy varmint barrel
22" stainless steel heavy
varmint barrel
Twist Rate
1:9
1:9
1:9
1:9
1:9
Sights
Adjustable open rear sight,
ramp front sights. Receiver
drilled and tapped for scope
bases.
Includes rear and front scope
bases only. Receiver grooved for
scope mount, drilled and tapped
for scope bases.
bases only. Receiver grooved
for scope mount, drilled and
tapped for scope bases.
3-9x32 blued scope mounted
and bore-sighted
bases only. Receiver grooved
for scope mount, drilled and
tapped for scope bases.
Length
41"
41"
41"
41"
41"
Length of Pull
13 ¼”
Approx.
Weight
6 lbs.
6½ lbs.
6½ lbs.
6½ lbs.
7 lbs.
MSRP
$269
$299
$289
$339
$429
Weights, stock dimensions, checkering pattern and wood grain may vary according to the individual firearm. Marlin Firearms reserves the right to change or modify
its products without notice. Pricing may vary by model, specification, color, size and availability. Follow the safety rules printed in firearms instruction books and
on ammunition boxes. If you do not have an instruction book for your Marlin firearm, write to Marlin Firearms, P.O. Box 1871, Madison, NC 27025 for a free copy or
visit our website at www.marlinfirearms.com. Please specify the model and serial number. The firearms herein have been photographed with the actions closed
to properly showcase their features. In actual practice, any firearm not in use must be left with the ammunition removed, action open and safety on. Consumer
Information, Arms Service, Parts and Repairs: 800-544-8892. Visit us on the web at www.marlinfirearms.com.
30 Specifications
30 subject
MarlinFirearms.com
SPECIFICATIONS
39A & 795 SERIES
Model
Golden 39A (Take down)
795
795 Combo
795SS
70PSS (Take down)
Caliber
22 Short, Long or Long Rifle (70600)
22 Long Rifle only (70680)
22 Long Rifle only w/ carry case (70670)
Capacity
Tubular magazine with patented
closure system, holds 26 Short,
21 Long, or 19 Long Rifle Cartridges
10-shot nickel-plated
magazine
magazine
magazine
7-shot nickel-plated magazine
Action
Lever action; solid-top receiver;
side ejection; rebounding hammer;
hammer block safety; one-step
takedown; deeply blued metal
surfaces; gold-finished
steel trigger
Autoloading; side ejection; automatic “last-shot” bolt holdopen; manual bolt hold-open; cross-bolt safety
Autoloading; side ejection;
automatic “last-shot” bolt
hold-open; manual bolt holdopen; cross-bolt safety
Nickel-plated autoloading; side ejection;
automatic “last-shot” bolt hold-open;
manual bolt hold-open; cross-bolt safety
Stock
Genuine American black walnut
with fluted comb; cut checkering;
full pistol grip and fore-end; blued
steel fore-end cap; swivel studs;
grip cap; rubber butt pad; tough
Mar-Shield finish
Monte Carlo black fiberglass-filled synthetic with swivel
studs
and molded-in checkering
Monte Carlo black
fiberglass-filled synthetic
with nickel-plated swivel
studs and molded-in
checkering
Monte Carlo black fiberglass-filled
synthetic with abbreviated fore-end, nickelplated swivel studs and molded-in
checkering
Barrel
24" with Micro-Groove® rifling
(16 grooves)
18" stainless steel with
(16 grooves)
16¼" stainless steel with Micro-Groove®
Twist
Rate
18" with Micro-Groove® rifling (16 grooves)
1:16"
1:16"
1:16"
1:16"
1:16"
Sights
Adjustable semi-buckhorn folding
rear sight, ramp front sight with
brass bead and Wide-Scan hood.
Solid top receiver tapped for
scope mount; scope adapter base;
offset hammer spur (right or left
hand) for scope use.
Adjustable open rear sight,
ramp
front sight. Receiver grooved
for scope mount.
4x20 scope mounted and
bore-sighted, adjustable
open rear sight, ramp front
sight
folding rear sight, ramp front
sight with high-visibility post
and cutaway Wide-Scan
hood. Receiver grooved for
scope mount.
Adjustable open rear sight, ramp front
sight with high-visibility orange post;
cutaway Wide-Scan hood. Receiver
grooved for s
cope mount.
Length
40"
37"
37"
37"
35¼"
Length of Pull
13 ¼”
Approx. Weight
6½ lbs.
4½ lbs.
4½ lbs.
4½ lbs.
3¼ lbs.
MSRP
$709
$183
$221
$262
$345
MODEL 60 RIMFIRE
Model
60
60C
60SB
60SN, 60SN w/Scope
60SS
Caliber
22 Long Rifle Only (70620)
22 Long Rifle w/Scope (70651)
Action
manual and automatic “lastshot” bolt hold open; receiver
top has serrated, non-glare
finish; cross-bolt safety
manual and automatic
“last-shot” bolt hold open; crossbolt safety; stainless steel barrel
manual and automatic “lastshot” bolt hold open; cross-bolt
safety; stainless steel barrel
Stock
laminate; full pistol grip; tough
Mar-Shield finish
Monte Carlo synthetic with
Realtree® Hardwoods™
camouflage pattern; full pistol
grip
laminate; full pistol grip; tough
Mar-Shield finish
Black fiberglass-filled synthetic
stock with swivel studs; full
pistol grip and molded-in
checkering
Monte Carlo laminated two-tone
black/grey hardwood; full pistol
grip; tough Mar-Shield finish;
rubber rifle butt pad; nickel-plated
swivel studs
14-shot tubular magazine with patented closure system
Capacity
19" with Micro-Groove® rifling (16 grooves)
Barrel
Twist Rate
1:16"
1:16"
1:16"
1:16"
1:16"
Sights
Adjustable open rear sight, ramp
front sight. Receiver grooved for
scope mount.
Adjustable open rear sight, ramp
front sight. Receiver grooved for
scope mount.
Adjustable semi-buckhorn folding
rear sight, ramp front sight with
high-visibility post and cutaway
Wide-Scan hood. Receiver
grooved for scope mount.
60SN – Adjustable open rear
sight, ramp front sight. Receiver
grooved for scope mount.
60SN w/Scope – Available with
4x20mm scope and mounts.
Adjustable open rear sight; ramp
front sight.
folding rear sight, ramp front
sight with high-visibility post and
cutaway Wide-Scan hood.
Receiver grooved for scope
mount.
Length
37½"
Length of Pull
13 ¼”
Approx. Weight
5½ lbs.
5½ lbs.
5½ lbs.
5½ lbs. 60SN
6 lbs 60SN with Scope
5½ lbs.
MSRP
$199
$234
$252
$191 (70650) / $207 (70651)
$301
31
MARLIN FIREARMS P.O. BOX 1871 • MADISON, NC 27025 800-544-8892 • WWW.MARLINFIREARMS.COM
MARLIN, MICRO-GROOVE, PRO-FIRE, SOFT TECH, X7 AND XT ARE TRADEMARKS OF RABRANDS, L.L.C.. XS IS A TRADEMARK OF XS SIGHT SYSTEMS, INC..
REALTREEHARDWOODS HD IS A TRADEMARK OF JORDAN OUTDOOR ENTERPRISES, LTD.. HIVIZIS A TRADEMARK OF NORTH PASS LTD.. MARSHIELD IS A
TRADEMARK OF THE MARSMETAL COMPANY.
© 2014 MARLIN FIREARMS, MADISON, NC 27025
MN118007

MarlinFirearms.com 1

Transcription

Similar documents

P9S and VP70Z HK P2Al and Emergency Flare Launcher

Jeff K.`s `M1917 Enfield`

Bruce Potts is surprised as he tests the SMK XS19

SCI-Central Washington Chapter Rifle Raffle

The Best Barrels - Crispin Engineering

R93 LRS2 Brochure

CLASSIC. AMERICAN. RIFLES.

Product Brochure

Marlin Model 1895SBL .45-70 (The Next Generation)

partners - VICTRIX