TBV™ TBV™ Cryogenic Ball Valves TBV

PROCESS VALVES
TBV™ Cryogenic Ball Valves
Supplying the needs of the cryogenic market since 1978, TBV™ continues to
offer its customers new and improved products for cold service.
TBV™
PROCESS VALVES
PROCESS VALVES
TABLE OF CONTENTS
TBV™ Cryogenic Ball Valves
Overview......................................................................................... 4
Technical Summary.......................................................................... 6
TBV Cryogenic Ball Valves Chart....................................................... 7
Overall Valves Features........................................................................... 8
Torque Curves Charts............................................................................ 13
Series 21/11........................................................................................... 14
Series 21/51........................................................................................... 15
Series 21/51A........................................................................................ 16
Series 21/31........................................................................................... 17
Series 21/18........................................................................................... 18
Series 21/20........................................................................................... 19
Series 21/28........................................................................................... 20
Series 21/80........................................................................................... 21
Aftermarket Services.............................................................................. 22
Trademark Information.......................................................................... 23
CT-TBV-BALL-CV
04/10-SWP-3M
TBV™
3
PROCESS VALVES
Cameron’s Valves & Measurement (V&M) group is a leading provider of valves
and measurement systems to the Oil and Gas industry. The group’s products are
primarily used to control, direct and measure the flow of oil and gas as it is moved
from individual wellheads through flow lines, gathering lines and transmission
systems to refineries, petrochemical plants and industrial centers for processing.
The Process Valves division provides critical service valves for refinery, chemical and
petrochemical processing businesses and for associated storage terminal
applications, particularly through the Orbit® and General ValvE® product lines.
Orbit and General VALVE lines are complimented by WKM® and TBV™ valve
products and expand the scope of this division’s product offerings.
TBV valve products are manufactured and assembled at Cameron’s new facility in
Millbury, Massachusetts. The TBV facility offers 100,000 ft2 of space of which
80,000 ft2 is dedicated to manufacturing, assembling, testing, shipping, and quality
assurance. The increased manufacturing space has afforded Cameron the
opportunity to expand its product offering and size ranges. TBV is now competitive
in the LNG, mining and petrochemical markets with its ability to offer larger size
ranges in its line of products.
4
TBV™
CT-TBV-BALL-CV
04/10-SWP-3M
PROCESS VALVES
TBV™ FAMILY OF CRYOGENIC PRODUCTS
Technical Summary
SIZE RANGE ½” THROUGH 16”
DN15 THROUGH DN400
PORTING CONFIGURATIONS STANDARD PORT and FULL PORT
APPLICATIONS • Air Separation
•Liquefied Natural Gas (LNG)
•Liquefied Petroleum Gas (LPG)
•Pharmaceutical (blanketing, ph control, pipe freezing, process chilling, water treatment, shrink fitting)
• Transport (Trailers)
• Steel Mills
•High Purity Gases For Electronic Applications
• Food Freezing
• Aerospace
SERVICES Ammonia (-28ºF / -33ºC)
Argon (- 303ºF / -186ºC)
Carbon Dioxide (-109 ºF / -78ºC)
Carbon Monoxide (- 312ºF)
Chlorine (-30ºF / -34ºC)
Deuterium (- 417ºF)
Ethylene (-155ºF / -104ºC)
Fluorine (- 307ºF / -188ºC)
Freon (-18 ºF / -28ºC)
Helium (- 452ºF/-269ºC)
Hydrogen (- 423ºF/-253ºC)
Krypton (- 244ºF)
Methane (- 259ºF/-162ºC)
Neon (- 410ºF/-246ºC)
Nitric Oxide (- 241ºF)
Nitrogen (- 320ºF/-196ºC)
Oxygen (- 297ºF/-183ºC)
Propane (-44ºF/-42ºC)
PRESSURE RANGE VACUUM THROUGH ASME 900
TEMPERATURE RANGE -452ºF / -269ºC to 500ºF / 260ºC
MATERIALS 316 / 316L Stainless Steel
All materials
used are
fully traceable Monel
Brass
END CONNECTIONS Flanged
Socket Weld
Butt Weld
SPECIFICATIONS ASME B1.20.1
ASME 16.10
ASME B16.11
ASME B16.25
ASME B16.34
ASME B31.3
ASME 16.5
MSS SP25
MSS SP61
BS6364
API 607 4TH Ed and API 607 5th Ed
Bechtel 3PS-PV00-F0001
Chevron Low Temp & Cryo Service Testing
OPERATION OH – Oval Handle
LH – Lever Handle
LG – Locking Gear Operator
ASTM A351 CF3M - Casting
ASTM A182 F316L - Forging
ASTM A276 or A479 316L - Bar
ASTM B164
ASTM B584
Extended Welded Ends
Threaded
NPT Pipe Threads
Face to Face Dimensions
Socket Weld Ends (diameter & depth)
Butt Weld Ends
Steel Valves (performance & design)
Process Piping (application)
Pipe Flanges & Fittings
Valve Marking
Pressure Testing
British Standard Cryo Leak Test Std.
Fire Safe to Atmosphere
Low Temp & Cryo Service Testing
Low Temp & Cryo Service Testing
AP – Prepared for Actuation
AI – Actuator Installed
90° and 180° Rotation
CRYOGENIC TESTING BSI BS 6364
Bechtel 3PS-PV-F001
Chevron Low Temp & Cryo Testing
CT-TBV-BALL-CV
04/10-SWP-3M
TBV™
5
PROCESS VALVES
TBV™ FAMILY OF CRYOGENIC PRODUCTS
TBV™ Cryogenic Ball Valves
Series 21/20
1/2” to 8”
Standard port, end-entry (unibody),
flanged cryogenic ball valve, floating
•
•
•
Series 21/28
1/2” to 8”
Full port, split body, flanged, cryogenic
ball valve
•
•
•
Series 21/31
1/2” to 3”
3-piece cryogenic ball valve, floating
(installed between existing flanges)
•
•
•
Series 21/51
1/2” to 8”
3-piece cryogenic diverter ball valve,
floating
•
Series 21/51A
1” to 2”
High flow cryogenic safety relief valve,
floating
Consult
Factory
Series 21/80
8” to 16”
Large bore, split body, cryogenic ball
valve, trunnion
•
•
•
•
•
•
•
•
•
•
•
•
•
phosgene assembly and testing
• Painting room
6
TBV™
CT-TBV-BALL-CV
04/10-SWP-3M
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Facility Features
• Clean Room for oxygen, chlorine and
•
•
600 psi
•
Brass
•
Monel
•
316LSS / 316SS
•
Thread
•
SW
Split body, 2-piece, flanged, standard or
full port cryogenic ball valve, floating
•
Materials
BW
1/2” to 12”
•
RTJ
Series 21/18
•
RF
•
1500
•
900
3-piece cryogenic ball valve, floating
Description
End Connections
600
1/4” to 8”
Size Range
300
Series 21/11
Model
150
Standard Port
ASME Rating
Full Port
Port
• Dedicated cryogenic testing area
• State of the art CNC machining
•
•
•
PROCESS VALVES
TBV™ FAMILY OF CRYOGENIC PRODUCTS
Overall Valve Features
Blow-out Proof One Piece Stem
The TBV™ brand of cryogenic valves utilize a one-piece stem that engages the ball and is secured in the valve cavity with
a large threaded stem collar that is set screwed for safety.
Stem Seal
The leak-proof integrity of the valve is further enhanced
by a welded bonnet design and Chevron V-ring packing
that can be adjusted by a simple turn of the stem nut.
Leak-free stem sealing is provided by the rings of PTFE
V-ring or graphoil packing that sit on a shoulder
machined on the blowout-proof stem, allowing the
Firesafe Design
packing and stem to move as a unit during thermal
cycles. In addition, the packing is live-loaded, retained by
self compensating belleville spring washers and a
packing adjustment nut. These features coupled with
close tolerance machining and finish of the packing
Firelip
bore, provide maximum stem seal life with the minimum
maintenance.
CT-TBV-BALL-CV
04/10-SWP-3M
TBV™
7
PROCESS VALVES
TBV™ FAMILY OF CRYOGENIC PRODUCTS (Cont.)
Overall Valve Features
Flow Direction
Where there is unidirectional flow, flow arrows are located on the valve in three areas so that there is no doubt how the
flow needs to go through the valve:
•Bottom boss of center section
•Top plate of the cryo extension
•Stainless steel tag on body
Cavity Pressure Relief
TBV has numerous options in handling cavity pressure relief. Depending upon whether unidirectional or bidirectional flow
is required as well as the type of valve configuration, we have the options listed below.
OPTION 1: Unidirectional Relief, AVAILABLE ON 3-PIECE VALVES (center section with two end plates). This photo
shows a slot in the upstream end plate which provides the cavity pressure relief. The seat sits on the raised face surface.
When the ball is in the closed position, internal cavity pressure relieves around the O.D. of the seat and through the slot and
then to the upstream pipe.
8
TBV™
CT-TBV-BALL-CV
04/10-SWP-3M
PROCESS VALVES
OPTION 2: Unidirectional Relief, AVAILABLE ON FLANGED VALVES, upstream relief hole in ball.
OPTION 3: Bidirectional flow, cavity pressure relieving seats are also available.
Inclination Limitations
It is recommended that TBV™ valves be installed with Extended Bonnet within 30° of true vertical. Valves with
graphite packing can be oriented in any direction.
30°
CT-TBV-BALL-CV
04/10-SWP-3M
TBV™
9
PROCESS VALVES
TBV™ FAMILY OF CRYOGENIC PRODUCTS (Cont.)
Overall Valve Features
Seats
TBV valves can use Cryofil, Kel-F or Ultrafil seats, specifically designed to provide leak-proof operation down to
-452°F / -269°C.
CRYO SEAT RATING CHART
psig BAR
4000 276
3500 241
3000 207
CRYOFIL
KEL-F
ULTRAFIL
2500 172
2000 138
1500 103
Class 300
1000
69
Class 150
500
34
0
0
-500
-400
-300
-200
-100
0
100
200
300
400
500
-296
-140
-184
-129
-73
-18
38
93
149
204
260
-452ºF
-269ºC
Cleaning Procedures
•
In accordance with Praxair GS 38
•
Clean room environment only
•All components to be detergent washed and rinsed
•White and ultraviolet light visual inspection to detect
lint, oils, and greases
•Inaccessible surfaces to be cleaned using wipe
method
•
All oxygen and cryogenic valves are assembled dry
•Valves to be double bagged and sealed in 2 ply
polyethylene bag
10 TBV™
CT-TBV-BALL-CV
04/10-SWP-3M
PROCESS VALVES
Cryogenic Boiling Points at 1 ATM
-18ºC
0ºF
-46ºC
-50ºF
-73ºC
-100ºF
-101ºC -150ºF
Freon (-18ºF -28ºC)
Ammonia (-28ºF -33ºC)
Chlorine (-30ºF -34ºC)
Propane (-44ºF -42ºC)
Carbon Dioxide (-109ºF -78ºC)
Ethylene (-155ºF -104ºC)
-129ºC -200ºF
-157ºC -250ºF
-184ºC -300ºF
Methane (-259ºF -162ºC)
Oxygen (-297ºF -183ºC)
Fluorine (-307ºF -188ºC)
Nitrogen (-320ºF -196ºC)
Argon (-303ºF -186ºC)
-212ºC -350ºF
-240ºC -400ºF
-268ºC -450ºF
Neon (-411ºF -246ºC)
Hydrogen (-423ºF -253ºC)
Helium (-452ºF -269ºC)
Absolute Zero (-459ºF -273ºC)
CT-TBV-BALL-CV
04/10-SWP-3M
TBV™ 11
PROCESS VALVES
TBV™ FAMILY OF CRYOGENIC PRODUCTS
Torque Curves
PCTFE (Kel-F) 1/2" through 8", Standard Port
100,000
8"
50,000
6"
10,000
4"
Torque (in-lbs.)
3"
5,000
2"
1-1/2"
1,000
1"
500
3/4"
1/2"
100
50
10
0
300
600
900
1,200
1,500
Differential Pressure (PSI)
PCTFE (Kel-F) 10" through 16", Full Port
1,000,000
16" 600
Torque (in-lbs.)
500,000
16" 300
12" 600
14" 300
10" 600
16"150
12" 300
100,000
12" 150
10" 300
10" 150
50,000
10,000
0
300
600
Differential Pressure (PSI)
12 TBV™
CT-TBV-BALL-CV
04/10-SWP-3M
900
1,200
1,500
PROCESS VALVES
SERIES 21/11 3-Piece, Cast & Barstock
Cryogenic Ball Valve
SIZE RANGE
PRESSURE RANGE
1/4” - 8”
ASME 600 - 1500
END CONNECTIONS
Raised face end plates for positive
component alignment and elimination of
radial pipe stresses. Socket, Butt Weld or
Threaded.
STANDARD CAVITY
PRESSURE RELIEF
METHOD
Upstream end plate slot or cavity pressure
relieving seats (for bi-directionality).
BALL / SEAT
CONFIGURATION
BODY SEAL
DESIGN
CASTING TYPE
UNIQUE FEATURE
BILL OF MATERIAL
Floating ball
Totally encapsulated body seals to prevent
cold flow of PTFE. High performance over
wide temperature and pressure range.
Spiral wound body seals above ASME 600.
Investment cast or sand cast; size and
pressure class dependant.
Versatile design with numerous end
connection availability.
PART
ITEM
BODY
A
END PLATES
B
BALL
C
J
O
STEM
D
J
FOLLOWER
E
SEATS
F
STEM SEALS
G
G
BODY SEALS
H
STOP
I
R
STEM NUTS
J
HANDLE
K
THRUST BEARING
L
BODY BOLTS
M
BODY NUTS with LOCK WASHERS
N
LOCK WASHER
O
STEM COLLAR
P
SET SCREW FOR COLLAR
Q
STEM SEAL WASHER
R
STEM BELLEVILLE SPRINGS
S
STOP PINS / BOLTS
T
K
I
S
E
T
M
D
L
P
Q
C
H
F
F H
B
A
B
N
CT-TBV-BALL-CV
04/10-SWP-3M
TBV™ 13
PROCESS VALVES
SERIES 21/51 3-Piece, Diverting Cast & Barstock
Cryogenic Diverter Ball Valve
SIZE RANGE
PRESSURE RANGE
1/2” - 8”
ASME 600 - 1500
END CONNECTIONS
Raised face end plates for positive component
alignment and elimination of radial pipe
stresses. Socket, Butt Weld or Threaded.
STANDARD CAVITY
PRESSURE RELIEF
METHOD
Does not apply because flow is diverted at
all times.
BALL / SEAT
CONFIGURATION
BODY SEALS
CASTING TYPE
UNIQUE FEATURE
BILL OF MATERIAL
14 TBV™
CT-TBV-BALL-CV
04/10-SWP-3M
Floating ball
Totally encapsulated body seals to prevent
cold flow of PTFE. High performance over
wide temperature and pressure range. Spiral
wound body seals ASME 600 and above.
Investment cast or sand cast; size and
pressure class dependant.
Available in two porting arrangements: 90°
and 180° operation. The 90° operation
allows flow from a bottom port to be
diverted to either of two outlet ports over
90° turn of the handle, but never shutting
off. The 180° operation also diverts from
the bottom port to the outlet ports, but uses
a 180° turn of the handle, allowing flow to
be completely shut off at the 90° position.
PART
ITEM
BODY
A
N
O
N
S
END PLATES
B
E
BALL
C
STEM
D
G
R
FOLLOWER
E
SEATS
F
STEM SEALS
G
BODY SEALS
H
STOP
I
HANDLE
J
THRUST BEARING
K
BODY BOLTS
L
BODY NUTS with LOCK WASHERS
M
STEM NUTS
N
LOCK WASHER
O
STEM COLLAR
P
SET SCREW FOR COLLAR
Q
STEM SEAL WASHER
R
STEM BELLEVILLE SPRINGS
S
STOP PINS / BOLTS
T
J
I
T
M
D
P
K
Q
H
F
B
L
H
C
F
A
B
PROCESS VALVES
SERIES 21/51A 3-Piece, High Flow Safety Relief, Cast
Cryogenic Ball Valve
SIZE RANGE
PRESSURE RANGE
1” Std. port
1” Full port
1 - 1/2” Full port
600 psi
END CONNECTIONS
Smooth transition, high flow end plates.
Male and female threaded connections.
Standard Cavity
Pressure Relief
Method
Symmetrical valve for dual relief. Each side
has redundant safety relief with both a
rupture disc and safety relief valve.
BALL / SEAT
CONFIGURATION
BODY SEAL
DESIGN
CASTING TYPE
UNIQUE FEATURE
BILL OF MATERIAL
Floating ball
Totally encapsulated body seals to prevent
cold flow of PTFE. High performance over
wide temperature and pressure range.
Investment body, sand cast ends
High Flow Capacity protects vessels from
over pressurization. Consistently high flow
ensures safe operation. Tanks are protected
even during operation of the valve.
PART
ITEM
BODY
A
END PLATES
B
BALL
C
STEM
D
FOLLOWER
E
SEATS
F
STEM SEALS
G
BODY SEALS
H
STOP
I
HANDLE
J
THRUST BEARING
K
BODY BOLTS
L
BODY NUTS with LOCK WASHERS
M
STEM NUTS
N
LOCK WASHER
O
SET SCREW FOR COLLAR
P
STEM COLLAR
Q
STEM SEAL WASHER
R
STEM BELLEVILLE SPRINGS
S
N
O
N
S
J
I
E
G
R
M
D
Q
K
P
H
F
C
F H
B
A
B
L
CT-TBV-BALL-CV
04/10-SWP-3M
TBV™ 15
PROCESS VALVES
SERIES 21/31 3-Piece, Wafer Cast & Barstock
Cryogenic Ball Valve
SIZE RANGE
PRESSURE RANGE
1/2” - 3”
ASME 150 - 900
END CONNECTIONS
To be installed between existing flanges
STANDARD CAVITY
PRESSURE RELIEF
METHOD
Upstream hole in ball or cavity pressure
relieving seats.
BALL / SEAT
CONFIGURATION
BODY SEAL
DESIGN
Floating ball
Totally encapsulated body seals to prevent
cold flow of PTFE. High performance over
wide temperature and pressure range.
Spiral wound body seals ASME 600 and
above.
CASTING TYPE
Investment cast or sand cast; size
and pressure class dependant.
UNIQUE FEATURE
Wafer design reduces weight and
installation [labor] costs.
BILL OF MATERIAL
PART
ITEM
BODY
A
END PLATES
B
BALL
C
STEM
D
FOLLOWER
E
SEATS
F
STEM SEALS
G
BODY SEALS
H
STOP
I
HANDLE
J
THRUST BEARING
K
STEM NUTS
L
SHIPPING SCREWS
M
STEM BELLEVILLE SPRINGS
N
LOCK WASHER
O
STEM COLLAR
P
SET SCREW FOR COLLAR
Q
STOP PINS / BOLTS
R
STEM SEAL WASHER
S
L
O
L
I
N
E
G
S
D
Q
K
P
F
M
CT-TBV-BALL-CV
04/10-SWP-3M
R
M
F
16 TBV™
J
B
H
C
A
H
B
PROCESS VALVES
SERIES 21/18 2-Piece, Full & Standard Port, Split Body, Barstock
Cryogenic Ball Valve
SIZE RANGE
PRESSURE RANGE
1/2” - 12”
ASME 150 - 1500
END CONNECTIONS
Flanged - Raised face
STANDARD CAVITY
PRESSURE RELIEF
METHOD
Upstream hole in ball or cavity pressure
relieving seats.
BALL / SEAT
CONFIGURATION
BODY SEAL
DESIGN
CASTING TYPE
UNIQUE FEATURE
BILL OF MATERIAL
Floating ball or trunnion ball support.
Totally encapsulated body seals to prevent
cold flow of PTFE. High performance over
wide temperature and pressure range.
Spiral wound body seals ASME 600 and
above.
Does not apply.
The 21/18 offers unsurpassed reliability
with a body machined from solid
wrought materials, providing maximum
strength and virtually eliminating porosity.
PART
ITEM
BODY
A
END PLATE
B
BALL
C
STEM
D
FOLLOWER
E
SEATS
F
STEM SEALS
G
BODY SEAL
H
STOP PLATE
I
HANDLE
J
THRUST BEARING
K
STOP PINS / BOLTS
L
STEM NUTS
M
STEM BELLEVILLE SPRINGS
N
BODY NUTS with LOCK
WASHERS
O
BODY STUDS
P
SET SCREW FOR COLLAR
Q
STEM COLLAR
R
STEM SEAL WASHER
S
HANDLE SPACER
T
RETAINING WASHER
U
HANDLE RETAINING BOLT
V
V
U
T
J
M
I
N
E
G
S
L
D
K
R
Q
F
C
F
P
A
H
B
O
Single Body Seal Design
CT-TBV-BALL-CV
04/10-SWP-3M
TBV™ 17
PROCESS VALVES
SERIES 21/20 End Entry, Standard Port, Cast, Flanged
Cryogenic Ball Valve
SIZE RANGE
PRESSURE RANGE
1/2” - 8”
ASME 150 - 300
END CONNECTIONS
Flanged - Raised face
STANDARD CAVITY
PRESSURE RELIEF
METHOD
Upstream hole in ball or cavity pressure
relieving seats.
BALL / SEAT
CONFIGURATION
BODY SEAL
DESIGN
Floating Ball
Totally encapsulated body seals to prevent
cold flow of PTFE. High performance over
wide temperature and pressure range.
CASTING TYPE
Investment Cast 1/2” - 3”. Sand Cast 4”
and above.
UNIQUE FEATURE
Unibody construction; no external leak
paths through valve body, dual body seal
design.
BILL OF MATERIAL
PART
ITEM
BODY
A
END PLUG
B
BALL
C
STEM
D
M
O
FOLLOWER
E
M
SEATS
F
STEM SEALS
G
BODY SEAL - INNER
H
BODY SEAL - OUTER
I
STOP PLATE
J
HANDLE
K
THRUST BEARING
L
STEM NUTS
M
STOP PINS/ BOLTS
N
LOCK WASHER
O
STEM BELLEVILLE SPRINGS
P
STEM SEAL WASHER
Q
SET SCREW FOR COLLAR
R
STEM COLLAR
S
P
K
J
E
N
G
Q
D
L
R
S
A
Dual Body Seal Design
18 TBV™
CT-TBV-BALL-CV
04/10-SWP-3M
B
I
F
C
F
H
PROCESS VALVES
SERIES 21/28 2-Piece, Full Port, Split Body, Cast, Flanged
Cryogenic Ball Valve
SIZE RANGE
PRESSURE RANGE
1” - 8”
ASME 150 - 600
END CONNECTIONS
Flanged - Raised face
STANDARD CAVITY
PRESSURE RELIEF
METHOD
Upstream hole in ball or cavity pressure
relieving seats.
BALL / SEAT
CONFIGURATION
BODY SEAL
DESIGN
CASTING TYPE
UNIQUE FEATURE
BILL OF MATERIAL
Floating ball
Totally encapsulated body seals to prevent
cold flow of PTFE. High performance over
wide temperature and pressure range.
Investment Cast 1” - 3”. Sand Cast 4” - 8”.
Now available in ASME Class 600: 3” - 8”.
PART
ITEM
BODY
A
ENDPLATE
B
BALL
C
STEM
D
FOLLOWER
E
SEATS
F
STEM SEALS
G
STEM SEAL WASHER
H
STEM COLLAR
I
BODY SEAL
J
BODY STUDS
K
BODY NUTS
L
THRUST BEARING
M
STOP PINS / BOLTS
N
STEM BELLEVILLE SPRINGS
O
STOP PLATE
P
HANDLE
Q
HANDLE SPACER
R
RETAINING WASHERS
S
HANDLE RETAINING BOLT
T
T
S
Q
S
R
P
O
E
G
G
H
N
D
I
M
A
J
F
C
F
B
L
K
CT-TBV-BALL-CV
04/10-SWP-3M
TBV™ 19
PROCESS VALVES
SERIES 21/80
SIZE RANGE
PRESSURE RANGE
2-Piece, full Port, Split Body, Cast, Flanged
Cryogenic Ball Valve
8” - 16”
ASME 150 - 900
END CONNECTIONS
Flanged - Raised face
Standard Cavity
Pressure Relief
Method
Bidirectional flow with pressure relief
upstream.
BALL / SEAT
CONFIGURATION
BODY SEAL
DESIGN
CASTING TYPE
UNIQUE
FEATURE
BILL OF MATERIAL
20 TBV™
CT-TBV-BALL-CV
04/10-SWP-3M
Trunnion
Spiral wound gaskets
Sand cast
Trunnion design with pressure activated
seats with cavity pressure relief in the ball
(spool piece in ball) for bi-directional flow
or hole in ball for unidirectional flow.
PART
ITEM
BODY
A
TRUNNION
B
STEM
C
BODY GASKET
D
SEATS
E
U
T
BALL
F
UPPER BUSHING
G
S
LOWER BUSHING
H
BONNET ASSEMBLY
I
G
O
END FLANGE
J
TRUNNION FLANGE
K
BODY STUDS
L
BODY NUTS
M
BONNET GASKET
N
THRUST BEARING
O
TRUNNION GASKET
P
BONNET STUDS
Q
BONNET NUTS
R
FOLLOWER
S
PACKING FLANGE
T
BRACKET
U
BRACKET STUDS
V
BRACKET NUTS
W
PACKING FLANGE NUTS
X
PACKING FLANGE BOLT S
Y
X
W
Y
V
I
R
C
N
Q
L
A
B
E
E
H
P
K
F
D
J
M
R
PROCESS VALVES
AFTERMARKET SERVICES FOR RETROFIT APPLICATIONS
Cameron’s Aftermarket Services’ goal is to help our customers
lower the total cost of valve ownership. To that end we offer
a full range of services from over twenty-five Service Centers
worldwide and can provide experienced personnel trained to
meet the specific service requirements of each valve type.
Aftermarket Services
•
Supplies replacement valves and parts:
• Customer Property Repair
–Maintains a full inventory of new and
Cameron valve customers to store assets at
reconditioned valves for immediate delivery
our service centers throughout the world
–Provides factory warranty support for all Cameron
OEM brands as well as service for most other
–The Customer Property Repair program allows
–Valves tracked in electronic database
accessible through the Internet
valves
• Field Service & Technical Support
•
Remanufactured Products
–Offers a broad range of API-compliant
–Field service technicians on call 24 hours a day
reconditioned equipment with fast delivery
7 days a week to handle service issues wherever
they arise
–Provides equipment installation, field repairs, as
• Total Valve Management
–Supply and service automation and control
packages
well as track and perform scheduled maintenance
–Assist with valve installation, commissioning
and start-up
CERTIFICATIONS
CT-TBV-BALL-CV
04/10-SWP-3M
TBV™ 21
PROCESS VALVES
TRADEMARK INFORMATION
TBV™ is a registered trademark which is owned by Cameron.
This document contains references to registered trademarks or product designations,
which are not owned by Cameron.
Trademark
Owner
Monel
INCO Alloys International, Inc.
22 TBV™
CT-TBV-BALL-CV
04/10-SWP-3M
PROCESS VALVES
PROCESS VALVES
VALVES & MEASUREMENT
3250 Briarpark Drive, Suite 300
Houston, TX 77042
USA Toll 800 323 9160
For the most current contact and location information go to: www.c-a-m.com/valvesandmeasurement
© Cameron Printed in USA 04/10-SWP-3M CT-TBV-BALL-CV WEB ONLY