Paint MSDS

Date: 1/21/2010
Time: 12:59 PM
e Valspar COl,:p..
Page: 001
-:.
To: MSDS @ 1-732-544-5828
Th
.;:;:
f.
valspar
Material Safety Data Sheet
1. PRODUCT AND COMPANY IDENTIFICATION
Product Identification
Product 10:
007.0004830
Product Name:
Product Use:
Print date:
VALSPAR HI HIDE PRIM
Paint product.
19/0ctJ2009
17/0ctl2009
Revision Date:
Company Identification
The Valspar Corporation - Architectural Coatings Division
1191 Wheeling Road
VVheeling, IL 60090
Manufacturer's Phone:
1-847 -520-8580
24-Hour Medical Emergency
Phone:
1-888-345-5732
2. HAZARDS IDENTIFICATION
Primary Routes of Exposure:
Inhalation
Ingestion
Skin absorption
Eye Contact:
• May cause eye irritation.
Skin Contact:
• Causes mild skin irritation.
Ingestion:
None known.
Inhalation:
• May cause irritation of respiratory tract.
Target Organ and Other Health Effects:
• Kidney injury may occur.
This product contains ingredients that may contribute to the following potential chronic health effects:
• Chronic exposure may cause permanent damage of health.
• Prolonged exposure to respirable crystalline quartz silica may cause delayed chronic injury (silicosis).
• Prolonged exposure over TLV may produce pneumoconiosis.
.,,"t'
Product 10: 007.0004830
Page 117
"":-",
.
CERTIFIED PRODUCT DATA SHEET
The Valspar Corporation
1101 Third Street South
Minneapolis, MN 55415
1-612-332-7371
Product ID:
LKW1001
Density (Ibs per US gallon):
Non Volatile % by Weight
Percent VHAP by Weight:
LBs VHAP/LB Solid:
LBs VHAP/GAL Solid:
VOC % by Weight
LBs VOC/Lb Solid:
Optimum Analytical
Conditions
Standard:
Separation column:
Oven Temperature:
Carrier Gas:
Injection Port Temperature:
Extraction Solvent:
Internal Standard(s)
other 1:
Other 2:
other 3:
Product Name: PACPRIME
14.97
74.44
o
o
o
.43~
.01
(Test Parameters)
METHOD311
DB-WAX or if coelusion of analytes, DB-1 (Capillary)
5 min @40C, 7C/min to 170C,5 min @ 170C
Helium 25 mllmin
250C
DMF
1-Propanol
Col: 30m x O.53mm(10) x 1.5 um
VOC
= As Applied: (-) Exempt by WT, not VOL
Other Test Methods:
Method 24 for density, % solids and %VOC
Other Data Elements:
Water % by Weight:
Non Volatile % by Volume:
24.29
54.39
Note: Data are provided "as supplied" (as formulated) except for coatings that release cure volatites
cure. These 2-part system values include the curing component.
during the
Certified by The Valspar Corporation
Revision Date:
Print date:
11/Jan/2008
11/Jan/2008
The information in this document is provided to assist you in complying with appropriate federal, state and local laws and
regulations. Valspar assumes no obligation or liability for use of this information. UNLESS VALSPAR AGREES
OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL
IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE
OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective
product, or a refund of its purchase price, at our option.