components

RACE WINNING
COMPONENTS
CONTENTS
With seven World Championships won since 2010, Renthal
cycle products are the choice of the performance rider.
1 - 2 // Intro - Contents
Renthal. Competition Ready. Trail focused.
S T EM S
Renthal cycle products are designed, developed and
manufactured at our facilities in Manchester, UK. We use the
highest quality materials, engineering and craftsmanship,
to provide you with premium parts that are the ultimate in
lightweight and durability. Hit the trail at full speed on any
Renthal product, confident that it has been manufactured by
a company run by engineers with an obsession for engineering
excellence and quality.
HA NDL EB AR S
INTRO
3 - 4 // Fatbar Carbon
5 - 6 // Fatbar
7 - 8 // Fatbar Lite Carbon
9 - 10 // Fatbar Lite
11 - 12 // Integra
13 - 14 // Apex
15 - 16 // Duo
17 - 18 // SR4 MTB Chainrings
19 - 20 // Lock-On Grips
21 - 22 // BMX MOTO bars - Push-on Grips - Chainrings - Padded Cells
Front Cover : Troy Brosnan
Aaron Gwin
// Specialized Racing
1
// Specialized Racing
2
UD Carbon Construction - The Fatbar
Carbon uses a full UD carbon construction.
Efficient placement and orientation of the
unidirectional carbon fibers maximizes the
strength and stiffness of the handlebar.
Ride Tuned - The UD (unidirectional)
carbon fibers are layered and aligned
to give specific flex characteristics. The
stiffness of the Fatbar Carbon results in
incredible control, yet careful tuning gives
the perfect level of comfort.
Thibaut Ruffin
3
// Commencal/Riding Addiction
Center Profile - The 31.8mm central
section extends much further than most
other handlebars. Widening the span of
this oversized section vastly increases the
strength and stiffness of this 780mm wide,
DH race ready handlebar.
Part Number
Rise
Width
Backsweep
Upsweep
Weight
M133
10mm
780mm
7°
5°
225g
M134
20mm
780mm
7°
5°
225g
M135
30mm
780mm
7°
5°
225g
M136
40mm
780mm
7°
5°
225g
4
7 Series Aluminum - The Renthal Fatbar is
constructed from exclusive, high strength,
7 series aluminum. The material and
specific heat treatment processes have been
carefully selected to give the ultimate in
strength and durability.
Surface Treatment - Millions of tiny steel
shot are blasted at high velocity at the
Fatbar, vastly increasing the fatigue life.
The hard anodized surface finish is abrasion
resistant, to keep your Fatbar looking fresh.
Race Proven - The Fatbar is raced by the
world’s fastest athletes and is proven at
the very top level of competition. Six World
Championship gold medals have been won
using the Renthal Fatbar.
Part Number
Rise
Width
Backsweep
Upsweep
Weight
M110
10mm
780mm
7°
5°
355g
M109
20mm
780mm
7°
5°
360g
M117
30mm
780mm
7°
5°
365g
M108
38mm
780mm
7°
5°
365g
5
SPEC
Aaron Gwin
// Specialized Racing
6
UD Carbon Construction - The Fatbar Lite
Carbon uses a full UD carbon construction.
Efficient placement and orientation of
the unidirectional carbon fibers maximize
strength, while keeping weight to an
absolute minimum.
Ride Tuned - The UD (unidirectional)
carbon fibers are layered and aligned to
give specific flex characteristics, unique
to the Fatbar Lite Carbon. This trail-proof
handlebar is built to maximize control and
comfort.
Trail Geometry - A full 740mm trail width
gives ample control in the most extreme
trail conditions. Four rise options allow
you to choose the right bar for your body
size, your riding style and your bike
set-up.
Neil Donoghue
7
// SPS Racing
Part Number
Rise
M128
10mm
M129
20mm
M130
30mm
M131
40mm
SPEC
Width
Backsweep
Upsweep
Weight
740mm
7°
5°
180g
740mm
7°
5°
180g
740mm
7°
5°
180g
740mm
7°
5°
180g
8
Taperwall Tubing - The Renthal Fatbar is
constructed from exclusive, high strength,
7 series aluminum. An optimized, taperwall
tube is used to minimize weight, while
maintaining maximum strength and
durability.
Surface Treatment - Millions of tiny steel
shot are blasted at high velocity at the
Fatbar Lite, vastly increasing the fatigue
life. The hard anodized surface finish is
abrasion resistant, to keep your Fatbar Lite
looking fresh.
Trail Geometry - A full 740mm width gives
ample control in the most extreme trail
conditions. Four rise options allow you to
choose the right bar for your body size,
riding style and bike set-up.
Part Number
Rise
Width
Backsweep
Upsweep
Weight
M118
10mm
740mm
7°
5°
269g
M119
20mm
740mm
7°
5°
269g
M120
30mm
740mm
7°
5°
271g
M121
38mm
740mm
7°
5°
272g
9
SPEC
Neil Donoghue
// SPS Racing
10
CNC Machined - The
Renthal Integra is
fully CNC machined
from a solid billet of
6082 T6 aluminum.
Richie Rude
11
// Yeti Fox
Six Bolt Configuration
Just six bolts are
used, instead of the
normal eight, vastly
reducing overall
weight.
Ultra Wide - The
64mm wide, u-shape
clamp gives superior
strength, structural
stability and
handlebar support.
Part Number
Offset
Weight
Rise
Mounting
Clamp Diameter
Clamp Width
STM-200
45/50mm
138g
0
Boxxer/Fox IS mount
31.8mm
64mm
12
A P E X COPY
AP E X
CNC Machined The Renthal Apex
is CNC’d from solid
billet 2014 aluminum
with 7075 aluminum
clamps.
240° Clamps - Twin
clamps give a unique
240° wrap of the
handlebar and help
vastly reduce overall
stem weight.
O.S. Center Bore The unique clamping
system allows for an
oversize center bore
to increase stiffness
and strength.
Part Number
Length
Weight
Rise
Stack Height
Clamp Diameter
Steerer Clamp
STM-101
40mm
118g
+/- 6°
40mm
31.8mm
28.6mm
STM-102
50mm
127g
+/- 6°
40mm
31.8mm
28.6mm
STM-103
60mm
136g
+/- 6°
40mm
31.8mm
28.6mm
STM-104
70mm
140g
+/- 6°
40mm
31.8mm
28.6mm
STM-105
80mm
149g
+/- 6°
40mm
31.8mm
28.6mm
STM-106
90mm
158g
+/- 6°
40mm
31.8mm
28.6mm
13
SPEC
Jared Graves
// Yeti Fox
14
D UO COPY
DUO
SPEC
CNC Machined The patented Renthal
Duo is fully CNC
machined from a
solid billet of 6082
T6 aluminum.
Jared Graves
15
// Yeti Fox
Split Stem Design Horizontally dividing
the stem allows
access to the core, to
remove the maximum
material possible.
U-Shape Clamp An uninterrupted
clamping area cradles
the underside of the
handlebar, eliminating
stress risers.
Part Number
Length
Weight
Rise
Stack Height
Clamp Diameter
Steerer Clamp
STM-100
50mm
143g
10°
40mm
31.8mm
28.6mm
STM-109
40mm
124g
10°
40mm
31.8mm
28.6mm
16
MCR104
MCR100
Hard Anodized finish
Hard Anodized finish
CNC Machined
CNC Machined
7075 Aluminum
7075 Aluminum
8,9 & 10 speed compatible
8,9 & 10 speed compatible
120mm BCD
104mm BCD
36T = 40g
32T = 35g
36, 37, 38 teeth available
32 to 44 teeth range
Offset tooth bed
CNC Machined - The
Renthal SR4 is fully
CNC machined from
solid, 5mm thick,
7075 T6 aluminum
plate.
Ultra Durable - Full
width tooth profile
and hard anodized
surface coating vastly
increases durability.
17
Ultra Stiff - The
5mm thick, I-beam
section gives the
ultimate combination
of strength, stiffness
and lightweight.
SPEC
18
L OCK- ON
COP Y
// Super Comfort
G122
// Soft
// Medium
G118
G119
// Kevlar®
G121
Grip the Technology
tm
19
Integrated Collars - Permanently
integrating the aluminum collars into the
grip body eliminates any movement that
can develop over time.
Four Compounds - Four different
compounds are available to perfectly
match a grip to your preferences and riding
style.
Kevlar® Compound - The Kevlar® brand
resin contained within these grips gives
three times the durability of a similar soft
compound grip.
Tapered End Profile - The tapered
transition between the grip and the end
collar gives the ultimate in comfort
Part Number
Compound
G119
Medium
G118
Soft
G122
Super Comfort
G121
Kevlar
®
SPEC
Tackiness
Absorption
★★★★
★★★★
★★★
★★★★★
★★★★
Control
★★★
★★★★
★★★★★
★★★★★
★★
★★
★★★★
20
Durability
★★★
★★★★★
★★★★
★★★★
KEVLAR® is a registered trademark of E.I du Pont de Nemours and Company
MOTO BMX Handlebars
4X Chainwheel (MCR102)
BMX Chainwheel (MCR101)
Hard Anodized finish
Hard Anodized finish
CNC Machined
CNC Machined
7075 Aluminum
7075 Aluminum
8,9 & 10 speed compatible
3/32” & 1/8” chain
23.8mm axle hole w/ alloy adaptors
for 19mm & 22mm axles
23.8mm axle hole w/ alloy adaptors
for 19mm & 22mm axles
34T = 90g
28T = 55g
34,36,38,40,42,44 teeth available
25,27,28,30,32 teeth available
Push-On Grips
// Kevlar
7 Series Aluminum - The Renthal MOTO is
constructed from exclusive, high strength,
7 series aluminum. The material, butting
and specific heat treatment processes have
been carefully selected to give the ultimate
in strength and durability.
Modular Construction - The all-aluminum
construction uses two single bolt clamps
and a brace bar. Incredibly light, compared
to a welded chromoly bar, the MOTO also
boasts the strength and stiffness needed
for BMX racing.
Surface Treatment - Millions of tiny
steel shot are blasted at high velocity at
the MOTO, vastly increasing the fatigue
life. The hard anodized surface finish is
abrasion resistant, to keep your MOTO
looking fresh.
Set-Up and Graphics - A detailed, laser
marked set-up grid ensures you can set
your preferred angle accurately.
Chemically applied, oven cured permanent
graphics provide a subtle aesthetic look to
coordinate with any bike.
Part Number
Name
Rise
Width
Backsweep
Upsweep
Weight
M114
MOTO 24
140mm / 5.5in
699mm / 27.5in
12°
1°
547g
M115
MOTO 20
190mm / 7.5in
711mm / 28in
12°
1°
611g
M116
MOTO 20XL
210mm / 8.25in
736mm / 29in
12°
1°
638g
21
// Soft
G117
Part Number
Compound
G116
Firm
G115
Medium
G114
Soft
G117
Kevlar
®
// Medium
G114
Tackiness
Absorption
★★★
★★★
★★
★★★★
★★★★
// Firm
G115
Durability
★★
★★★★★
★★★★
★★★
★★★★
G116
Control
★★★★★
★★★★
★★★★★
★★★★★
★★★★
★★★★
Renthal Grip Glue available - G101
Padded Cell
The Padded Cell is a durable, low
profile frame protector. Double stitching
and hook and loop closure ensures it
stays in place. Choose from four sizes
to accurately fit your frame.
Part Number
Size
Length
Min Circumference
Max Circumference
MBA-CSP-XS
X-Small
250mm
50mm
80mm
MBA-CSP-S
Small
250mm
60mm
100mm
MBA-CSP-M
Medium
250mm
85mm
140mm
MBA-CSP-L
Large
250mm
110mm
180mm
22
KEVLAR® is a registered trademark of E.I du Pont de Nemours and Company
www.renthalcycling.com
This symbol, Renthal® and Fatbar® are registered trademarks of Renthal Ltd. UK