Collet Chucks and Collets

®
Collet Chucks
and Collets
From the world’s number one
name in workholding
®
Power Collet Chucks
Collet Chucks or 3-Jaw?
For accurate, high-volume turning of bar stock or other parts under
3-1/8” in diameter, your best bet is a collet chuck. Why?
■ Consistent centering. Collet chucks grip the workpiece around
the entire circumference, with no slippage when the stock is regripped, and less risk of deformation to thin-walled workpieces.
■ Better tool clearance. Short or thin parts can be machined
closer to the chuck face for better accuracy and less distortion.
Dead length chuck with
Setrite® adjustment
■ Higher speeds. Compact, lightweight collet chucks have a
greater tolerance for high centrifugal forces, hold their gripping
force more consistently, and reduce the load on machine spindle
bearings.
■ Longer life. In high-volume production, collet chucks have
proven to have a consistently longer service life than 3-jaw
chucks.
The Riten Selection
Multibore standard chuck
Riten Collet Chucks are precision ground with guaranteed repeatability of .0002” TIR. Tolerances are held uniformly from the mounting
to the working collet taper.
Riten offers three basic types of power collet chucks:
1. Pullback. Simple, one-piece design used on standard lathes.
2. Set Length. Used where precise pick-off is required. Little or no
axial part movement.
3. Setrite®. Set length chuck with ultra-fine four-screw adjustment
feature. The most accurate chuck in the metalworking industry.
Quick change chuck
Our set length series includes special short-profile models using the
versatile Multibore collet, and three labor-saving quick change
chucks with pre-loadable bayonet caps.
NOTE: All collet chucks require a drawtube adapter to fit specific
machines. See page 24 for specifications.
1
Call 1-800-338-0027
®
Collets
Unique Manufacturing Process
Riten size-for-size collets (5C, 16C and R8) are designed for excellent
accuracy and repeatability, superior gripping power, and extended
service life. To achieve this, we load the collet with a coil at the base
of the slots, heat the collet to a glowing red, insert the spreader into
the slots, and push down on the collet face. After cooling for one to
two minutes, the spreader is removed and the collet cools completely. This process gives our collets a spring of .010” and drastically
improves the life of the collet. Few other manufacturers go to this
length to ensure a quality collet.
Size-for-size collets
(5C, 16C and R8)
You’ll also find Riten collets are easier to attach, because we mill off
the thin top edge of the threads to prevent binding in the radius of
the female thread.
Special Models
For bar work, the Multibore collet gives you great flexibility. Just 12
collets provide every size for 1/8” to 3-1/8”. Multibores are segmented to close parallel for uniform gripping on undersize or oversize
bars, with no marring of the finished parts.
For second operation, the B Type Spring Collets are ideally suited
for short gripping with both Multibore and Quick Change power
chucks.
Multibore collets
This catalog displays our full line of collets and chucks, most of which
are in stock for quick delivery. Special designs are available on
request.
If you have questions, call our Technical Service people at 800-3380027, or visit us online at www.riten.com.
B Type Spring collets
2
www.riten.com
®
Product Index
Riten Collets
Riten Power Collet Chucks
Page
Page
Setrite® Set Length . . . . . . . . . . . . . . . . 4
5C, 16C Collet Chucks
R8 Collets . . . . . . . . . . . . . . . . . . . . 12
• Setrite® feature allows accuracy
adjustment to virtual zero
• Accepts 5C and 16C collets
• Type A and DIN mounts
Set Length Standard
5C, 16C Collet Chucks . . . . . . . . . . . . . . 5
• Short overall length ideal for main
or sub-spindle work
• Accepts 5C and 16C collets
• Type A and DIN mounts
5C, 16C Collet Chucks . . . . . . . . . . . . . . 6
• Standard pullback operation
• Accepts 5C and 16C collets
• Type A and DIN mounts
Diameters up to 27/32” and 20mm
5C Collets (inch). . . . . . . . . . . . . . . .13
5C Collets (Metric) . . . . . . . . . . . . . 14
Diameters up to 1-1/8” and 27mm
16C Collets (inch) . . . . . . . . . . . . . . 15
16C Collets (Metric) . . . . . . . . . . . . 16
Diameters up to 1-5/8” and 42.5mm
Multibore Collets, Plain Bore. . . . . 17
Diameters up to 3-1/8” (79.37mm)
Multibore Standard Collet Chucks . . . . 7
• Set length operation
• Ideal for second operation work
• Accepts DIN type Multibore & spring collets
• Type A mount
Multibore Collets, Heavy Duty. . . . 18
Multibore Short Collet Chucks . . . . . . . 8
Multibore Collets, DIN 6343 . . . . . . 19
• Set length operation
• Ideal for bar work with minimum working envelope
• Accepts Multibore collets only
• Type A mount
Diameters up to 3.14” (80mm)
Quick Change Collet Chucks, Type A . . 9
• Faster collet changes
• Set length operation
• Ideal for bar or secondary work
• Accepts DIN type Multibore & spring collets
• Type A mount
Quick Change Collet Chucks, DIN . . . .10
Diameters up to 3.07” (78mm)
(Serrated Bore)
B-42 Spring Collets (inch). . . . . . . 20
B-42 Spring Collets (Metric). . . . . . 21
Diameters up to 1-5/8” and 42.5mm
B-60 Spring Collets (inch) . . . . . . . 22
B-60 Spring Collets (Metric). . . . . . 23
Diameters up to 2-5/16” and 60.5mm
• Faster collet changes
• Set length operation
• Ideal for bar or secondary work
• Accepts DIN type Multibore & spring collets
• Recess DIN 6353 mount
Drawtube Adapter Specifications . . . . . . . . . . . . . .24
Quick Change Collet Chucks, Short.. . 11
• Faster collet changes
• Set length operation
• Short length maximizes work envelope
• Ideal for bar work
• Accepts standard & DIN Multibore collets
• Type A mount
3
Call 1-800-338-0027
Accuracy Chart: 5C, 16C and R8 . . . . . . . . . . . . . .25
Accuracy Chart: Multibore & B Type . . . . . . . . . . . 26
5C & 16C Set Length
Power Chucks
®
Setrite® Adjustment for A Type and
Straight Recess DIN 6353
■ Setrite® four-screw adjustment feature allows accuracy
adjustment to virtual zero, eliminating any error in the collet
■ Main spindle and sub-spindle CNC chuck applications
■ Accuracy guaranteed to .0002” TIR from rear
mounting register and working collet taper
■ Repeatability is .0002” TIR
■ Hardened and ground main body and cone
■ Speeds up to 6000 rpm
B
L
5C Collet
I
M
H
N
G CLASS 6H
.472" min
SPINDLE CLASS
A
H
G CLASS 6H
C
E PITCH CIRCLE
D H6
.276
J
16C Collet
F MOUNTING HOLES (6)
K
Dimensions
shown in in / mm
St. Recess Model No.
w/Mount Model No.
Mount
Capacity, Round
Capacity, Hex
Capacity, Square
A
B
C
D
E
F
G Thread
H
I
J
K
L
M
N
P
Maxmimum RPM
Drawbar Force (lb/ft)
Clamping Force (lb/ft)
Weight/Wt.w/Mount
Straight Recessed
P
For 5C Type Collets
5C390
5C390
5C250
5C260
A2-5
A2-6
1.125 / 27
1.125 / 27
.875 /22
.875 / 22 .
.70 / 17.8
.70 / 17.8
3.34 / 85
3.34 / 85
4.33 / 111
4.33 / 111
4.72 / 120
4.72 / 120
3.15 / 80
3.15 / 80
3.93 / 100
3.93 / 100
M8
M8
M68 x 1.5
M68 x 1.5
.51 / 13
.51 / 13
1.10 / 28-.95 / 25 1.10 / 28-.95 / 25
2.28 / 58-2.15 / 55 2.28 / 58-2.15 / 55
.94 / 24
.94 / 24
5.55 / 141
5.55 / 141
5.31 / 135
6.49 / 165
2.44 / 62
2.44 / 62
1.18 / 30
1.18 / 30
6000
6000
4,046
4,046
12,500
12,500
9.3/15 lbs.
9.3/17.8 lbs.
With A5 or A6 Mount
For 16C- Type Collets
16C685
16C685
16C250
16C260
A2-5
A2-6
1.625 / 42
1.625 / 42
1.375 / 35
1.375 / 35
1.14 / 29
1.14 / 29
4.31 / 110
4.31 / 110
5.43 / 138
5.43 / 138
6.10 / 155
6.10 / 155
3.70 / 94
3.70 / 94
5.11 / 130
5.11 / 130
M10
M10
M88 x 1.5
M88 x 1.5
.51 / 13
.51 / 13
1.10 / 28-.94 / 25 1.10 / 28-.94 / 25
2.28 / 58-2.16 / 55 2.28 / 58-2.16 / 55
.86 / 22
.86 / 22
6.34 / 161
6.61 / 168
6.10 / 155
6.49 / 165
3.03 / 77
3.03 / 77
.91 / 23
1.18 / 30
6000
6000
5,392
5,392
17,000
17,000
17.6/23.5 lbs.
17.6/26 lbs.
16C685
16C140
140x6
1.625 / 42
1.375 / 35
1.14 / 29
4.31 / 110
5.43 / 138
6.10 / 155
3.70 / 94
5.11 / 130
M10
M88 x 1.5
.51 / 13
1.10 / 28-.94 / 25
2.0 / 51-1.85 / 47
.86 / 22
6.34 / 161
6.10 / 155
3.03 / 77
.91 / 23
6000
5,392
17,000
17.6/X?5 lbs.
4
See pages 13-16 for collet specifications.
www.riten.com
5C & 16C Set Length
Power Chucks
®
For A Type and DIN 6353
Straight Recess Mounts
■ Short overall length ideal for main spindle and
sub-spindle applications
■ In second operations work, shoulder components can
be stopped against the face of the collet.
■ Accuracy guaranteed to .0002” TIR from rear
mounting register and working collet taper
■ Repeatability is .0002” TIR
■ Hardened and ground main body and cone
B
.236"
A
A
J
5C Collet
H
C
D H6
E PITCH CIRCLE
G CLASS 6H
H
C
G CLASS 6H
■ Speeds up to 6000 rpm
B
J
16C Collet
F MOUNTING HOLES (6)
K
K
DIN 6353 Mounts
A2 Mount
Dimensions shown in in/mm
For 5C Type Collets
Chuck Model No.
5C251
5C261
5C141
16C261
16C280
16C170
A2-5
A2-6
140x6
A2-6
A2-8
170 x 6
Capacity, Round
1.125 / 27
1.125 / 27
1.125 / 27
1.625 / 42
1.625 / 42
1.625 / 42
Capacity, Hex
.875 / 22
.875 / 22
.875 / 22
1.375 / 35
1.375 / 35
1.375 / 35
Capacity, Square
.750 / 19
.750 / 19
.750 / 19
1.00 / 25.4
1.00 / 25.4
1.00 / 25.4
A
3.34 / 85
3.34 / 85
3.34 / 85
4.33 / 110
4.33 / 110
4.33 / 110
B
4.60 / 117
4.60 / 117
4.60 / 117
5.67 / 144
6.34 / 161
5.67 / 144
C
5.31 / 135
6.49 / 165
6.30 / 160
6.49 / 165
8.66 / 220
7.87 / 200
D
–
–
5.51 / 140
–
–
6.69 / 170
E
–
–
4.126 / 104.8
–
–
5.25 / 133.4
Mount
F
G thread
J
K
5
For 16C Type Collets
–
M68 x 1.5
1.33 / 34-1.26 / 31 1.33 / 34-1.26 / 31
.98 / 25
M10
–
M68 x 1.5
M88 x 1.5
–
M68 x 1.5
1.33 / 34-1.26 / 31
1.18 / 30
1.18 / 30
–
M88 x 1.5
1.33 / 34-1.18 / 30 1.33 / 34-1.18 / 30
1.18 / 30
M12
M88 x 1.5
1.33 / 34-1.18 / 30
1.18 / 30
1.18 / 30
Maxmimum RPM
6000
6000
6000
6000
4500
4500
Drawbar Force (lb/ft)
4,046
4,046
4,046
5,392
5,392
5,392
Clamping Force (lb/ft)
12,500
12,500
12,500
17,000
17,000
17,000
Approx. Chuck Weight
10.6 lbs
13 lbs
12.3 lbs
20.5 lbs
26 lbs
23.6 lbs
See pages 13-16 for collet specifications.
Call 1-800-338-0027
5C & 16C Collet Chucks
®
Pullback design for A Type and
Straight Recess DIN 6353
■ Used on CNC turning machines with drawtube actuation
■ Main spindle and sub-spindle CNC chuck applications
■ Suitable for bar work and second operation machining
■ Accuracy guaranteed to .0002” TIR from rear
mounting register and working collet taper
■ Repeatability is .0002” TIR
■ Hardened and ground main body and cone
■ Speeds up to 6000 rpm
C
D
L
A
B E
J
5C Collet
Drawtube
Adapter
16C Collet
Collet Chuck
Dimensions shown in in/mm
For 5C Type Collets
Chuck Model No.
Mount
Capacity, Round
For 16C Type Collets
5C245
5C255
5C256
5C265
5C266
5C285
5C145
A2-4
A2-5
A2-5
A2-6
A2-6
A2-8
140x6
16C255
16C265
16C285
A2-5
A2-6
A2-8
1.125 / 27 1.125 / 27 1.125 / 27 1.125 / 27 1.125 / 27 1.125 / 27 1.125 / 27
1.625 / 42
1.625 / 42
1.625 / 42
Capacity, Hex
.875 / 22
.875 / 22 .875 / 22 .875 / 22 .875 / 22 .875 / 22
.875 / 22
1.375 / 35
1.375 / 35
1.375 / 35
Capacity, Square
.750 / 19
.750 / 19 .750 / 19 .750 / 19 .750 / 19
.750 / 19 .750 / 19
1.00 / 25.4
1.00 / 25.4
1.00 / 25.4
A
2.41 / 61 3.19 /81 3.19 / 81 4.17 / 106 4.17 / 106 5.51 / 140 3.26 / 83
3.24 / 82.5
4.21 / 107
5.51 / 140
B
4.25 / 108 5.31 / 135 5.31 / 135 6.69 / 170 6.69 / 170 8.66 / 220 6.30 / 160
5.31 / 135
6.69 / 170
8.66 / 220
C
3.54 / 90 5.0 / 127 3.50 / 89 5.0 / 127
6.0 / 153 6.0 / 153 5.0 / 127
6.00 / 152.5 6.00 / 152.5
D
.87 / 22
.98 / 25
E
2.5 / 64 3.25 / 82.6 3.2 5/ 82.6 4.19 / 106.4 4.19 / 106.4 5.5 / 139.7 5.51 / 140
J
43.8 / 1.7
L
2.16 / 55 3.54 / 90 2.36 / 60 3.15 / 80 4.72 / 120 4.72 / 120 3.07 / 78
.98 / 25
.98 / 25
.98 / 25
1.18 / 30
.98 / 25
2.4 / 60.8 2.4 / 60.8 3.26 / 82.8 3.26 / 82.8 4.3 / 109.8 2.36 / 60
.98 / 25
.98 / 25
3.25 / 82.6 4.19 / 106.4
6.00 / 152.5
1.18 / 30
5.5 / 139.7
2.39 / 60.8
3.26 / 82.8
4.32 / 109.8
3.94 / 100
4.13 / 105
4.13 / 105
Maxmimum RPM
6000
6000
6000
6000
6000
4500
6000
6000
6000
4500
Drawbar Force (lb/ft)
4,496
4,496
4,496
4,496
4,496
4,496
4,496
5,394
5,394
5,394
Clamping Force (lb/ft)
15,700
15,700
15,700
15,700
15,700
15,700
15,700
19,500
19,500
19,500
Approx. Chuck Weight
10 lbs
14 lbs
12 lbs
18 lbs
21 lbs
29 lbs
14 lbs
15 lbs
20 lbs
33 lbs
6
See pages 13-16 for collet specifications.
www.riten.com
Multibore Standard Collet Chucks
®
Set length operation for DIN standard
Multibore and B type spring collets and
A type mounts
■ Uses DIN type Multibore collets for a powerful parallel grip
over a wide diameter range. When gripping short components,
or where marking of a finished diameter is to be avoided, use
B type spring collets or a fixed bore size collet.
■ Large capacity: up to 2.625” round
■ Accuracy guaranteed to .0002” TIR from rear mounting
register and working collet taper
■ Repeatability is .0002” TIR
■ Hardened and ground main body and cone
■ Speeds up to 6000 rpm
■ Also available in DIN 55026 mountings
C
D
G
F
B E J
A
H
L
Drawtube
Adapter
Multibore
Collet
B type
Spring Collet
Dimensions shown in in/mm
7
Chuck Model No.
Mount
DIN Multibore Collet
Capacity, Round
Capacity, Hex
Capacity, Square
Spring Collet
Capacity, Round
Capacity, Hex
Capacity, Square
A
B
C
D
E
F
G
H
J
L
Maxmimum RPM
Drawbar Force (lb/ft)
Clamping Force (lb/ft)
Approx. Chuck Weight
Call 1-800-338-0027
J495
J496
A2-5
A2-6
M673
M673
1.65 / 42
1.65 / 42
1.41 / 36
1.41 / 36
1.14 / 29
1.14 / 29
B42
B42
1.65 / 42
1.65 / 42
1.50 / 38
1.50 / 38
1.18 / 30
1.18 / 30
4.57 / 116
4.57 / 116
5.31 / 135
6.69 / 170
4.67 / 118.5
4.67 / 118.5
.98 / 25
.98 / 25
3.25 / 82.58
4.19 / 106.4
M58 x 1.5
M58 x 1.5
.75 / 19-1.1 / 28 .75 / 19-1.14 / 29
.59 / 15
.59 / 15
2.56 / 65
2.56 / 65
3.15 / 80
3.15 / 80
6000
6000
5,390
5,390
13,200
13,200
28 lbs
28 lbs
J475
A2-6
M677
2.36 / 60
2.04 / 52
1.65 / 42
B60
2.36 / 60
2.05 / 52
1.65 / 42
5.59 / 142
6.69 / 170
5.77 / 146.5
1.18 / 30
4.19 / 106.4
M76 x 1.5
.94 / 24-1.39 / 34
.59 / 15
3.27 / 83
3.15 / 80
6000
8,530
22,100
39 lbs
J498
A2-8
M677
2.36 / 60
2.04 / 52
1.65 / 42
B60
2.36 / 60
2.05 / 52
1.65 / 42
5.59 / 142
6.69 / 170
5.77 / 146.5
1.18 / 30
5.5 / 139.7
M76 x 1.5
.94 / 24-1.39 / 34
.59 / 15
3.27 / 83
3.15 / 80
4500
8,530
22,100
39 lbs
See pages 19-23 for collet specifications.
J834
A2-8
J660
3.15 / 80
2.71 / 69
2.20 / 56
B80
3.15 / 80
2.71 / 69
2.20 / 56
8.66 / 220
8.66 / 220
7.81 / 198.5
1.18 / 30
5.5 / 139.7
M100 x 2.0
1.81 / 46-2.28 / 58
2.28 / 58
4.17 / 106
4.33 / 110
4000
9,885
25,700
54 lbs
Multibore Short Collet Chucks
®
Set length operation for Multibore
standard collets and A type mounts
■ Ideal for bar work with minimum working envelope (not
suitable for gripping short components for secondary
operation).
■ Large capacity: up to 2.59” round
■ Accuracy guaranteed to .0002” TIR from rear mounting
register and working collet taper
■ Repeatability is .0002” TIR
■ Hardened and ground main body and cone
■ Speeds up to 6000 rpm
■ Also available in DIN 55026 mountings
B
L
E
J
C
A
D
F
Multibore
Collet
Drawtube
Adapter
Dimensions shown in in/mm
Chuck Model No.
F325
F757
F327
F941
Mount
A2-5
A2-5
A2-6
A2-6
Std. Multibore Collet
W-850
V-120
V-120
T-285
Capacity, Round
1.65 / 42
2.12 / 54
2.12 / 54
2.59 / 66
Capacity, Hex
1.49 / 38
2.00 / 51
2.00 / 51
2.24 / 57
Capacity, Square
1.22 / 31
1.61 / 41
1.61 / 41
1.78 / 44
A
4.57 / 116
5.59 / 142
5.59 / 142
6.69 / 170
B
3.86 / 98
4.49 / 113
C
M68 x 1.5
M70 x 1.5
D*
E
2.36 / 60
1.31 /34 - 1.69 /43
5.08 / 129
M70 x 2.0
5.78 / 131
M70 x 2.0
2.09 / 52
2.44 / 62
2.95 / 75
1.22 / 31 - 1.61 / 41
1.81 / 48 - 2.28 / 58
1.81 / 48 - 2.28 / 58
F
.71 / 18
.59 / 15
.79 / 20
1.18 / 30
J
2.56 / 65
2.16 / 55
3.27 / 83
3.78 / 96
Maxmimum RPM
6000
6000
6000
5000
Drawbar Force (lb/ft)
5,390
8,535
8,535
8,535
Clamping Force (lb/ft)
13,200
22,200
22,200
22,200
Approx. Chuck Weight
22 lbs
34 lbs
34 lbs
48 lbs
* D represents the maximum drawtube thread diameter in conjunction with a drawtube adapter.
8
See pages 17 and 18 for collet specifications.
www.riten.com
Quick Change Collet Chucks, Type A
®
Set length operation for DIN standard
Multibore and B type spring collets
and A type mounts
■ Quick change bayonet cap design saves setup time
■ Uses DIN type Multibore collets for a powerful parallel grip
over a wide diameter range. When gripping short components,
or where marking of a finished diameter is to be avoided, use
B type spring collets or a fixed bore size collet.
■ Large capacity: up to 2.36” round
■ Accuracy guaranteed to .0002” TIR from rear mounting
register and working collet taper
■ Repeatability is .0002” TIR
■ Hardened and ground main body and cone
■ Speeds up to 6000 rpm
■ Also available in DIN 55026 mountings
B
D
C
A
Multibore
Collet
B type
Spring Collet
Dimensions shown in in/mm
Chuck Model No.
Mount
DIN Multibore Collet
Spring Collet1
Capacity, Round
Capacity, Hex
Capacity, Square
A
B
C
D
E
Maxmimum RPM
Drawbar Force (lb/ft)
Clamping Force (lb/ft)
Approx. Chuck Weight
Chuck Seal Part No.2
Chuck Cap Part No.3
Ejector Part No.
Backstop Part No.
9
Call 1-800-338-0027
D233
A2-5
M673
B42
1.65 / 42
1.50 / 38
1.18 / 30
4.49 / 114
5.79 / 147
2.36 / 60
1.22 / 31
.35 / 9
6000
5,392
13,199
19 lbs
D237
C428GA
D242
D241
D234
A2-6
M673
B42
1.65 / 42
1.50 / 38
1.18 / 30
4.49 / 114
5.79 / 147
2.36 / 60
1.22 / 31
.35 / 9
6000
5,392
13,199
19.8 lbs
D237
C428GA
D242
D241
D475
A2-6
M677
B60
2.36 / 60
2.05 / 52
1.65 / 42
5.75 / 146
7.52 / 191
2.76 / 70
1.89 / 48
.39 / 10
6000
8,536
22,200
28.1 lbs
D485
C142GA
D490
D678
1 Backstop cannot be used with Spring Collets.
2 Each collet size requires a polyurethane chip Chuck Seal
3 Additional Quick Change Chuck Caps can be ordered for
pre-loading collets and further reducing downtime.
D477
A2-8
M677
B60
2.36 / 60
2.05 / 52
1.65 / 42
5.75 / 146
7.52 / 191
2.76 / 70
1.89 / 48
.39 / 10
4500
8,536
22,200
30.9 lbs
D485
C142GA
D490
D678
See pages 19-23 for
collet specifications.
Quick Change Collet Chucks, DIN
®
Set length operation for DIN standard
Multibore and B type spring collets
and straight recess DIN 6353 mounts
■ Quick change bayonet cap design saves setup time
■ Uses DIN type Multibore collets for a powerful parallel grip
over a wide diameter range. When gripping short compnents,
or where marking of a finished diameter is to be avoided, use
B type spring collets or a fixed bore size collet.
■ Large capacity: up to 2.36” round
■ Accuracy guaranteed to .0002” TIR from rear mounting
■
■
■
■
B
register and working collet taper
Repeatability is .0002” TIR
Hardened and ground main body and cone
Speeds up to 6000 rpm
Call for availability of A type spindle mountings.
B
C
D
A
A
Multibore
Collet
D
C
B type Spring Collet
Dimensions shown in in/mm
Chuck Model No.
Mount
DIN Multibore Collet
Spring Collet1
Capacity, Round
Capacity, Hex
Capacity, Square
A
B
C
D
E
Maxmimum RPM
Drawbar Force (lb/ft)
Clamping Force (lb/ft)
Approx. Chuck Weight
Chuck Seal Part No.2
Chuck Cap Part No.3
Ejector Part No.
Backstop Part No.
D634
140 x 60
M673
B42
1.65 / 42
1.41 / 36
1.14 / 29
4.49 / 114
5.79 / 147
2.36 / 60
1.22 / 31
.35 / 9
6000
5,392
13,199
19 lbs
D237
C428GA
D242
D241
1 Backstop cannot be used with Spring Collets.
2 Each collet size requires a polyurethane chip Chuck Seal
3 Additional Quick Change Chuck Caps can be ordered for
pre-loading collets and further reducing downtime.
D636
170 x 6
M677
B60
2.36 / 60
2.04 / 52
1.65 / 42
5.75 / 146
7.52 / 191
2.76 / 70
1.89 / 48
.39 / 10
6000
5,392
13,199
30.9 lbs
D485
C142GA
D490
D489
See pages 19-23 for
collet specifications.
www.riten.com
10
Quick Change Collet Chucks, Short
®
Set length operation for standard or DIN
Multibore collets and A type mounts
■ Short body design ideal for bar work with limited working
envelope
■ Quick change bayonet cap design saves setup time
■ Models available for both standard and DIN type Multibore
collets
■ Large capacity: up to 3.07” round
■ Accuracy guaranteed to .0002” TIR from rear mounting
register and working collet taper
■ Repeatability is .0002” TIR
B
■ Hardened and ground main body and cone
■ Speeds up to 6000 rpm
■ Call for availability of A type spindle mountings.
D
A
C
Dimensions shown
in in/mm
Chuck Model No.
Mount
Multibore Collet
Capacity, Round
Capacity, Hex
Capacity, Square
A
B
C
D
Max Forward Stroke Required
Maxmimum RPM
Drawbar Force (lb/ft)
Clamping Force (lb/ft)
Approx. Chuck Weight
Chuck Seal Part No.1
Chuck Cap Part No.2
11
For DIN Multibore Collets
For Standard Multibore Collets
C19
D603
D428
D604
D605
D606
D548
D607
D608
D609
D610
A2-5
A2-5
A2-6
A2-6
A2-8
A2-8
A2-8
A2-5
A2-6
A2-6
A2-8
T980
W850
W850
V120
V120
T285
N175
M673
M673
M677
M677
1.26 / 28
1.65 / 42
1.65 / 42
2.12 / 54
2.12 / 54
2.59 / 66
3.15 / 80
1.65/42
1.65/42
2.36/60
2.36/60
1.00 / 25
1.41 / 36
1.41 / 36
2.00 / 51
2.00 / 51
2.24 / 57
2.71 / 69
1.41/36
1.41/36
2.04/52
2.04/52
.75 / 19
1.22 / 31
1.22 / 31
1.61 / 41
1.61 / 41
1.78 / 44
2.20 / 56
1.14/29
1.14/29
1.65/42
1.65/42
3.14 / 95
4.49 / 114
4.49 / 114
5.75 / 146 5.75 / 146 6.54 / 166 8.07 / 205
4.49/114
4.49/114
5.75/146
5.75/146
4.41 / 112 4.33 / 110
4.33 / 110
5.51 / 140 5.51 / 140 6.10 / 155 6.69 / 170
4.33/110
4.33/110
5.35/136
5.35/136
1.57 / 40
2.36 / 60
2.36 / 60
2.76 / 70
2.76 / 70
3.46 / 88
3.46 / 88
2.36/60
2.36/60
2.76/70
2.76/70
1.22 / 31
1.22 / 31
1.22 / 31
1.89 / 48
1.89 / 48
1.89 / 48
2.28 / 58
1.22/31
1.22/31
1.89/48
1.89/48
.35 / 9
.35 / 9
.35 / 9
.39 / 10
.39 / 10
.39 / 10
.47 / 12
.35 / 9
.35 / 9
.39 / 10
.39 / 10
6000
6000
6000
6000
4500
4500
4000
6000
6000
6000
4500
4,037
5,392
5,392
8,536
8,536
8,536
9,885
5,392
5,392
8,536
8,536
9,878
13,199
13,199
22,200
22,200
22,200
25,699
13,199
13,199
22,200
22,200
11 lbs
15 lbs
15.4 lbs
22 lbs
30.9 lbs
39 lbs
55.1 lbs
15 lbs
15.4 lbs
22 lbs
30.9 lbs
D819
D237
D237
D485
D485
D619
D548
D237
D237
D485
D485
C555GA
C68GA
C68GA
C983GA
C983GA
C556GA
C492GA
C428GA
C428GA
C142GA
C142GA
1 Each collet size requires a polyurethane chip Chuck Seak
2 Additional Quick Change Chuck Caps can be ordered for pre-loading collets and further reducing downtime.
Call 1-800-338-0027
See pages 17-19 for collet specifications.
R8 Collets (inch and Metric)
®
Round only
B
D
Dimensions (inches)
C
A
A
.95”
Size
1/16”
3/32”
1/8”
5/32”
3/16”
7/32”
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
7/16”
15/32”
1/2”
17/32”
9/16”
19/32”
5/8”
21/32”
11/16”
23/32”
3/4”
25/32”
13/16”
27/32”
Part Number (inch)
2mm
3mm
4mm
5mm
6mm
7mm
8mm
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
20mm
R8-R-1/16
R8-R-3/32
R8-R-1/8
R8-R-5/32
R8-R-3/16
R8-R-7/32
R8-R-1/4
R8-R-9/32
R8-R-5/16
R8-R-11/32
R8-R-3/8
R8-R-13/32
R8-R-7/16
R8-R-15/32
R8-R-1/2
R8-R-17/32
R8-R-9/16
R8-R-19/32
R8-R-5/8
R8-R-21/32
R8-R-11/16
R8-R-23/32
R8-R-3/4
R8-R-25/32
R8-R-13/16
R8-R-27/32
1/8” – 3/4” x 32nds
1/8” – 3/4” x 16ths
1/8” – 3/4” x 8ths
C
D
4.05” 1.24” 8°25’
Part Number (Metric)
R8-R-2
R8-R-3
R8-R-4
R8-R-5
R8-R-6
R8-R-7
R8-R-8
R8-R-9
R8-R-10
R8-R-11
R8-R-12
R8-R-13
R8-R-14
R8-R-15
R8-R-16
R8-R-17
R8-R-18
R8-R-19
R8-R-20
R8 Round Collet Set (Metric)
Set
R8 Round Collet Sets (inch)
Set
Size
B
2mm – 20mm x 1mm
No. of Collets Model No.
19
R8-SET-1
No. of Collets Model No.
21
11
6
R8-SET-5
R8-SET-6
R8-SET-7
12
www.riten.com
5C Collets (inch)
®
Round, Hex and Square
B
D
A
13
Size
Round
1/64”
1/32”
3/64”
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
5C-R-1/64
5C-R-1/32
5C-R-3/64
5C-R-1/16
5C-R-5/64
5C-R-3/32
5C-R-7/64
5C-R-1/8
5C-R-9/64
5C-R-5/32
5C-R-11/64
5C-R-3/16
5C-R-13/64
5C-R-7/32
5C-R-15/64
5C-R-1/4
5C-R-17/64
5C-R-9/32
5C-R-19/64
5C-R-5/16
5C-R-21/64
5C-R-11/32
5C-R-23/64
5C-R-3/8
5C-R-25/64
5C-R-13/32
5C-R-27/64
5C-R-7/16
5C-R-29/64
5C-R-15/32
5C-R-31/64
5C-R-1/2
5C-R-33/64
5C-R-17/32
5C-R-35/64
5C-R-9/16
5C-R-37/64
5C-R-19/32
5C-R-39/64
5C-R-5/8
5C-R-41/64
5C-R-21/32
5C-R-43/64
5C-R-11/16
Hex
Square
5C-H-1/8
5C-S-1/8
5C-H-3/16
5C-S-3/16
5C-H-1/4
5C-S-1/4
5C-H-5/16
5C-S-5/16
5C-H-3/8
5C-S-3/8
5C-H-7/16
5C-S-7/16
5C-H-1/2
5C-S-1/2
Dimensions (inches)
A
C
Size
Round
45/64”
23/32”
47/64”
3/4”
49/64”
25/32”
51/64”
13/16”
53/64”
27/32”
55/64”
7/8”
57/64”
29/32”
59/64”
15/16”
61/64”
31/32”
63/64”
1”
1-1/64”
1-1/32”
1-3/64”
1-1/16”
1-5/64”
1-3/32”
1-7/64”
1-1/8”
5C-R-45/64
5C-R-23/32
5C-R-47/64
5C-R-3/4
5C-R-49/64
5C-R-29/32
5C-R-51/64
5C-R-13/16
5C-R-53/64
5C-R-27/32
5C-R-55/64
5C-R-7/8
5C-R-57/64
5C-R-29/32
5C-R-59/64
5C-R-15/16
5C-R-61/64
5C-R-31/32
5C-R-63/64
5C-R-1
5C-R-1-1/64
5C-R-1-1/32
5C-R-1-3/64
5C-R-1-1/16
5C-R-1-5/64
5C-R-1-3/32
5C-R-1-7/64
5C-R-1-1/8
B
C
D
1.25” 3.28” 1.47” 10°
Hex
Square
5C-H-3/4
5C-S-3/4
5C-H-13/16
5C Round Collet Sets (inch)
Set
5C-H-9/16
5C-S-9/16
5C-H-5/8
5C-S-5/8
5C-H-11/16
5C-S-11/16
Emergency Collet: 5C-EC
Call 1-800-338-0027
1/16” – 1-1/16” x 64ths
1/16” – 1-1/16” x 32nds
1/16” – 1-1/16” x 16ths
1/8” – 1 x 64ths
No. of Collets Model No.
65
33
17
8
5C-SET-4
5C-SET-5
5C-SET-6
5C-SET-7
5C Collets (Metric)
®
Round only
B
D
A
Size
Part Number
Dimensions (mm)
A
C
Size
B
Part Number
5C-R-0.5
18.0mm
5C-R-18.0
1.0mm
5C-R-1.0
18.5mm
5C-R-18.5
1.5mm
5C-R-1.5
19.0mm
5C-R-19.0
2.0mm
5C-R-2.0
19.5mm
5C-R-19.5
2.5mm
5C-R-2.5
20.0mm
5C-R-20.0
3.0mm
5C-R-3.0
20.5mm
5C-R-20.5
3.5mm
5C-R-3.5
21.0mm
5C-R-21.0
4.0mm
5C-R-4.0
21.5mm
5C-R-21.5
4.5mm
5C-R-4.5
22.0mm
5C-R-22.0
5.0mm
5C-R-5.0
23.0mm
5C-R-23.0
5.5mm
5C-R-5.5
23.5mm
5C-R-23.5
6.0mm
5C-R-6.0
24.0mm
5C-R-24.0
6.5mm
5C-R-6.5
24.5mm
5C-R-24.5
7.0mm
5C-R-7.0
25.0mm
5C-R-25.0
7.5mm
5C-R-7.5
25.5mm
5C-R-25.5
8.0mm
5C-R-8.0
26.0mm
5C-R-26.0
8.5mm
5C-R-8.5
26.5mm
5C-R-26.5
9.0mm
5C-R-9.0
27.0mm
5C-R-27.0
9.5mm
5C-R-9.5
5C-R-10.0
10.5mm
5C-R-10.5
11.0mm
5C-R-11.0
11.5mm
5C-R-11.5
12.0mm
5C-R-12.0
12.5mm
5C-R-12.5
13.0mm
5C-R-13.0
13.5mm
5C-R-13.5
14.0mm
5C-R-14.0
14.5mm
5C-R-14.5
15.0mm
5C-R-15.0
15.5mm
5C-R-15.5
16.0mm
5C-R-16.0
16.5mm
5C-R-16.5
17.0mm
5C-R-17.0
17.5mm
5C-R-17.5
D
31.75 85.4 37.3 10°
0.5mm
10.0mm
C
Emergency Collet: 5C-EC
5C Round Collet Sets (Metric)
Set
No. of Collets Model No.
3mm-27mm x 0.5mm
49
5C-SET-1
3mm-27mm x 1mm
25
5C-SET-2
14
www.riten.com
16C Collets (inch)
®
Round, Hex and Square
B
D
Dimensions (inches)
A
A
Size
1/16”
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
Round
16C-R-1/16
16C-R-1/8
16C-R-3/16
16C-R-1/4
16C-R-5/16
16C-R-3/8
16C-R-7/16
16C-R-1/2
16C-R-9/16
16C-R-5/8
16C-R-11/16
16C-R-3/4
16C-R-13/16
16C-R-7/8
16C-R-15/16
16C-R-1
16C-R-1-1/16
16C-R-1-1/8
16C-R-1-3/16
16C-R-1-1/4
16C-R-1-5/16
16C-R-1-3/8
16C-R-1-7/16
16C-R-1-1/2
16C-R-1-9/16
16C-R-1-5/8
Emergency Collet: 16C-EC
15
Call 1-800-338-0027
C
B
C
D
1.89” 4.35” 2.26” 10°
Hex
Square
16C-H-1/4
16C-H-5/16
16C-H-3/8
16C-H-7/16
16C-H-1/2
16C-H-9/16
16C-H-5/8
16C-H-11/16
16C-H-3/4
16C-H-13/16
16C-H-7/8
16C-H-15/16
16C-H-1
16C-H-1-1/16
16C-H-1-1/8
16C-H-1-3/16
16C-H-1-1/4
16C-H-1-5/16
16C-H-1-3/8
16C-S-1/4
16C-S-5/16
16C-S-3/8
16C-S-7/16
16C-S-1/2
16C-S-9/16
16C-S-5/8
16C-S-11/16
16C-S-3/4
16C-S-13/16
16C-S-7/8
16C-S-15/16
16C-S-1
16C Collets (Metric)
®
Round, Hex and Square
B
D
A
Size
Round
1.0mm
1.5mm
2.0mm
2.5mm
3.0mm
3.5mm
4.0mm
4.5mm
5.0mm
5.5mm
6.0mm
6.5mm
7.0mm
7.5mm
8.0mm
8.5mm
9.0mm
9.5mm
10.0mm
10.5mm
11.0mm
11.5mm
12.0mm
12.5mm
13.0mm
13.5mm
14.0mm
14.5mm
15.0mm
15.5mm
16.0mm
16.5mm
17.0mm
17.5mm
18.0mm
18.5mm
19.0mm
19.5mm
20.0mm
20.5mm
21.0mm
21.5mm
16C-R-1.0
16C-R-1.5
16C-R-2.0
16C-R-2.5
16C-R-3.0
16C-R-3.5
16C-R-4.0
16C-R-4.5
16C-R-5.0
16C-R-5.5
16C-R-6.0
16C-R-6.5
16C-R-7.0
16C-R-7.5
16C-R-8.0
16C-R-8.5
16C-R-9.0
16C-R-9.5
16C-R-10.0
16C-R-10.5
16C-R-11.0
16C-R-11.5
16C-R-12.0
16C-R-12.5
16C-R-13.0
16C-R-13.5
16C-R-14.0
16C-R-14.5
16C-R-15.0
16C-R-15.5
16C-R-16.0
16C-R-16.5
16C-R-17.0
16C-R-17.5
16C-R-18.0
16C-R-18.5
16C-R-19.0
16C-R-19.5
16C-R-20.0
16C-R-20.5
16C-R-21.0
16C-R-21.5
Emergency Collet: 16C-EC
Hex
16C-H-6.0
16C-H-6.5
16C-H-7.0
16C-H-7.5
16C-H-8.0
16C-H-8.5
16C-H-9.0
16C-H-9.5
16C-H-10.0
16C-H-10.5
16C-H-11.0
16C-H-11.5
16C-H-12.0
16C-H-12.5
16C-H-13.0
16C-H-13.5
16C-H-14.0
16C-H-14.5
16C-H-15.0
16C-H-15.5
16C-H-16.0
16C-H-16.5
16C-H-17.0
16C-H-17.5
16C-H-18.0
16C-H-18.5
16C-H-19.0
16C-H-19.5
16C-H-20.0
16C-H-20.5
16C-H-21.0
16C-H-21.5
C
Square
Size
16C-S-6.0
16C-S-6.5
16C-S-7.0
16C-S-7.5
16C-S-8.0
16C-S-8.5
16C-S-9.0
16C-S-9.5
16C-S-10.0
16C-S-10.5
16C-S-11.0
16C-S-11.5
16C-S-12.0
16C-S-12.5
16C-S-13.0
16C-S-13.5
16C-S-14.0
16C-S-14.5
16C-S-15.0
16C-S-15.5
16C-S-16.0
16C-S-16.5
16C-S-17.0
16C-S-17.5
16C-S-18.0
16C-S-18.5
16C-S-19.0
16C-S-19.5
16C-S-20.0
16C-S-20.5
16C-S-21.0
16C-S-21.5
22.0mm
22.5mm
23.0mm
23.5mm
24.0mm
24.5mm
25.0mm
25.5mm
26.0mm
26.5mm
27.0mm
27.5mm
28.0mm
28.5mm
29.0mm
29.5mm
30.0mm
30.5mm
31.0mm
31.5mm
32.0mm
32.5mm
33.0mm
33.5mm
34.0mm
34.5mm
35.0mm
35.5mm
36.0mm
36.5mm
37.0mm
37.5mm
38.0mm
38.5mm
39.0mm
39.5mm
40.0mm
40.5mm
41.0mm
41.5mm
42.0mm
42.5mm
Round
16C-R-22.0
16C-R-22.5
16C-R-23.0
16C-R-23.5
16C-R-24.0
16C-R-24.5
16C-R-25.0
16C-R-25.5
16C-R-26.0
16C-R-26.5
16C-R-27.0
16C-R-27.5
16C-R-28.0
16C-R-28.5
16C-R-29.0
16C-R-29.5
16C-R-30.0
16C-R-30.5
16C-R-31.0
16C-R-31.5
16C-R-32.0
16C-R-32.5
16C-R-33.0
16C-R-33.5
16C-R-34.0
16C-R-34.5
16C-R-35.0
16C-R-35.5
16C-R-36.0
16C-R-36.5
16C-R-37.0
16C-R-37.5
16C-R-38.0
16C-R-38.5
16C-R-39.0
16C-R-39.5
16C-R-40.0
16C-R-40.5
16C-R-41.0
16C-R-41.5
16C-R-42.0
16C-R-42.5
Dimensions (mm)
A
48
Hex
16C-H-22.0
16C-H-22.5
16C-H-23.0
16C-H-23.5
16C-H-24.0
16C-H-24.5
16C-H-25.0
16C-H-25.5
16C-H-26.0
16C-H-26.5
16C-H-27.0
16C-H-27.5
16C-H-28.0
16C-H-28.5
16C-H-29.0
16C-H-29.5
16C-H-30.0
16C-H-30.5
16C-H-31.0
16C-H-31.5
16C-H-32.0
16C-H-32.5
16C-H-33.0
16C-H-33.5
16C-H-34.0
16C-H-34.5
16C-H-35.0
B
C
D
110.5 57.5 10°
Square
16C-S-22.0
16C-S-22.5
16C-S-23.0
16C-S-25.0
16C-S-24.0
16C-S-24.5
16C-S-25.0
16
www.riten.com
Plain Bore Multibore Collets
®
A
C
Dimensions (inches)
Part No.
B
Grip Range
Inch
mm
1/16 - 3/16
1/8 - 1/4
1/4 - 3/8
3/8 - 1/2
1/2 - 5/8
5/8 - 3/4
3/4 - 7/8
7/8 - 1
1 - 1-1/8
1-1/8 - 1-1/4
1-1/4 - 1-3/8
1-3/8 - 1-1/2
1-1/2 - 1-5/8
1-1/2 - 1-5/8
1.58 - 4.76
3.17 - 6.35
6.35 - 9.52
9.52 - 12.70
12.70 - 15.87
15.87 - 19.05
19.05 - 22.22
22.22 - 25.40
25.40 - 28.57
28.57 - 31.75
31.75 - 34.92
34.92 - 38.10
38.10 - 41.27
38.10 - 41.27
T980
Hex
Round
T980-R-B1
T980-R-B2
T980-R-B3
T980-R-B4
T980-R-B5
T980-R-B6
T980-R-B7
T980-R-B8
T980-R-B9
T980-X-B68
T980-X-B69
T980-X-B70
T980-X-B71
T980-X-B72
T980-X-B73
T980-X-B74
T980-X-B75
Square
Round
T980-S-B86
T980-S-B87
T980-S-B88
T980-S-B89
T980-S-B90
T980-S-B91
W850-R-C1
W850-R-C2
W850-R-C3
W850-R-C4
W850-R-C5
W850-R-C6
W850-R-C7
W850-R-C8
W850-R-C9
W850-R-C10
W850-R-C11
W850-R-C12
W850-R-C13
W850-R-C14*
T980
W850
V120
T285
N175
A
B
1.66”
2.04”
2.47”
2.88”
3.15”
1.99”
2.76”
3.46”
3.91”
4.72”
W850
Hex
C
14°
15°
15°
15°
15°
Square
W850-X-C68
W850-X-C69
W850-X-C70
W850-X-C71
W850-X-C72
W850-X-C73
W850-X-C73
W850-X-C74
W850-X-C75
W850-X-C76
W850-X-C77
W850-X-C78
W850-X-C79
W850-S-C86
W850-S-C87
W850-S-C88
W850-S-C89
W850-S-C90
W850-S-C91
W850-S-C92
W850-S-C93
W850-S-C94
W850-S-C95
* 39-42mm round only
Grip Range
Inch
mm
17
1/16 - 3/16
1/8 - 1/4
1/4 - 3/8
3/8 - 1/2
1/2 - 5/8
5/8 - 3/4
3/4 - 7/8
7/8 - 1
1 - 1-1/8
1-1/8 - 1-1/4
1-1/4 - 1-3/8
1-3/8 - 1-1/2
1-1/2 - 1-5/8
1-5/8 - 1-3/4
1-3/4 - 1-7/8
1-7/8 - 2
2 - 2-1/8
2-1/8 - 2-1/4
2-1/4 - 2-3/8
2-3/8 - 2-1/2
2-1/2 - 2-5/8
2-5/8 - 2-3/4
2-3/4 - 2-7/8
2-7/8 - 3
3 - 3-1/8
1.58 - 4.76
3.17 - 6.35
6.35 - 9.52
9.52 - 12.70
12.70 - 15.87
15.87 - 19.05
19.05 - 22.22
22.22 - 25.40
25.40 - 28.57
28.57 - 31.75
31.75 - 34.92
34.92 - 38.10
38.10 - 41.27
41.27 - 44.45
44.45 - 47.62
47.62 - 50.80
50.80 - 53.97
53.97 - 57.15
57.15 - 60.32
60.32 - 63.50
63.50 - 66.67
66.67 - 69.85
69.85 - 73.02
73.02 - 76.20
76.20 - 79.37
Round
V120-R-D1
V120-R-D2
V120-R-D3
V120-R-D4
V120-R-D5
V120-R-D6
V120-R-D7
V120-R-D8
V120-R-D9
V120-R-D10
V120-R-D11
V120-R-D12
V120-R-D13
V120-R-D14
V120-R-D15
V120-R-D16
V120-R-D17
Call 1-800-338-0027
V120
Hex
V120-X-D69
V120-X-D70
V120-X-D71
V120-X-D72
V120-X-D73
V120-X-D74
V120-X-D75
V120-X-D76
V120-X-D77
V120-X-D78
V120-X-D79
V120-X-D80
V120-X-D81
V120-X-D82
V120-X-D83
Square
Round
V120-S-D87
V120-S-D88
V120-S-D89
V120-S-D90
V120-S-D91
V120-S-D92
V120-S-D93
V120-S-D94
V120-S-D95
V120-S-D96
V120-S-D97
V120-S-D98
T285-R-E2
T285-R-E3
T285-R-E4
T285-R-E5
T285-R-E6
T285-R-E7
T285-R-E8
T285-R-E9
T285-R-E10
T285-R-E11
T285-R-E12
T285-R-E13
T285-R-E14
T285-R-E15
T285-R-E16
T285-R-E17
T285-R-E18
T285-R-E19
T285-R-E20
T285-R-E21
T285
Hex
T285-X-E69
T285-X-E70
T285-X-E71
T285-X-E72
T285-X-E73
T285-X-E74
T285-X-E75
T285-X-E76
T285-X-E77
T285-X-E78
T285-X-E79
T285-X-E80
T285-X-E81
T285-X-E82
T285-X-E83
T285-X-E84
T285-X-E85
Square
T285-S-E87
T285-S-E88
T285-S-E89
T285-S-E90
T285-S-E91
T285-S-E92
T285-S-E93
T285-S-E94
T285-S-E95
T285-S-E96
T285-S-E97
T285-S-E98
T285-S-E99
Round
& Smooth Bore
N175-R-F5
N175-R-F6
N175-R-F7
N175-R-F8
N175-R-F9
N175-R-F10
N175-R-F11
N175-R-F12
N175-R-F13
N175-R-F14
N175-R-F15
N175-R-F16
N175-R-F17
N175-R-F18
N175-R-F19
N175-R-F20
N175-R-F21
N175-R-F22
N175-R-F23
N175-R-F24
N175-R-F25
N175
Hex
N175-X-F72
N175-X-F73
N175-X-F74
N175-X-F75
N175-X-F76
N175-X-F77
N175-X-F78
N175-X-F79
N175-X-F80
N175-X-F81
N175-X-F82
N175-X-F83
N175-X-F84
N175-X-F85
N175-X-F86
N175-X-F87
N175-X-F88
Square
N175-S-F100
N175-S-F101
N175-S-F102
N175-S-F103
N175-S-F104
N175-S-F105
N175-S-F106
N175-S-F107
N175-S-F108
N175-S-F109
N175-S-F110
N175-S-F111
N175-S-F112
Heavy Duty Multibore Collets
®
A
C
Dimensions (inches)
Part No.
W850
V120
T285
N175
B
Grip Range
Inch
mm
.23 - .35
.35 - .47
.47 - .59
.59 - .70
.70 - .82
.82 - .94
.94 - 1.06
1.06 - 1.18
1.18 - 1.30
1.30 - 1.41
1.41 - 1.53
1.53 - 1.65
1.65 - 1.77
1.77 - 1.89
1.89 - 2.00
2.00 - 2.12
6-9
9 - 12
12 - 15
15 - 18
18 - 21
21 - 24
24 - 27
27 - 30
30 - 33
33 - 36
36 - 39
39 - 42
42 - 45
45 - 48
48 - 51
51 - 54
.47 - .59
.59 - .70
.70 - .82
.82 - .94
.94 - 1.06
1.06 - 1.18
1.18 - 1.30
1.30 - 1.41
1.41 - 1.53
1.53 - 1.65
1.65 - 1.77
1.77 - 1.89
1.89 - 2.00
2.00 - 2.12
2.12 - 2.24
2.24 - 2.36
2.36 - 2.46
2.46 - 2.59
2.59 - 2.71
2.71 - 2.83
2.83 - 2.95
2.95 - 3.07
12 - 15
15 - 18
18 - 21
21 - 24
21 - 24
27 - 30
30 - 33
33 - 36
36 - 39
39 - 42
42 - 45
45 - 48
48 - 51
51 - 54
54 - 57
57 - 60
60 - 63
63 - 66
66 - 69
69 - 72
72 - 75
75 - 78
B
2.04”
2.47”
2.88”
3.15”
2.76”
3.46”
3.91”
4.72”
W850 Heavy Duty
Round/Hex
Square
V120 Heavy Duty
Round/Hex
Square
W850-RX-MM70
W850-RX-MM71
W850-RX-MM72
W850-RX-MM73
W850-RX-MM74
W850-RX-MM75
W850-RX-MM76
W850-RX-MM77
W850-RX-MM78
W850-RX-MM79
W850-R-MM13*
W850-R-MM14*
V120-RX-MN70
V120-RX-MN71
V120-RX-MN72
V120-RX-MN73
V120-RX-MN74
V120-RX-MN75
V120-RX-MN76
V120-RX-MN77
V120-RX-MN78
V120-RX-MN79
V120-RX-MN80
V120-RX-MN81
V120-RX-MN82
V120-RX-MN83
V120-RX-MN84
V120-R-MN18*
W850-S-MM98
W850-S-MM99
W850-S-MM100
W850-S-MM101
W850-S-MM102
W850-S-MM103
W850-S-MM104
W850-S-MM105
* Round only
Grip Range
Inch
mm
A
15°
15°
15°
15°
V120-S-MN98
V120-S-MN99
V120-S-MN100
V120-S-MN101
V120-S-MN102
V120-S-MN103
V120-S-MN104
V120-S-MN105
V120-S-MN106
V120-S-MN107
V120-S-MN108
* Round only
T285 Heavy Duty
Round/Hex
Square
N175 Heavy Duty
Round/Hex
Square
T285-RX-MP72
T285-RX-MP73
T285-RX-MP74
T285-RX-MP75
T285-RX-MP76
T285-RX-MP77
T285-RX-MP78
T285-RX-MP79
T285-RX-MP80
T285-RX-MP81
T285-RX-MP82
T285-RX-MP83
T285-RX-MP84
T285-RX-MP85
T285-RX-MP86
T285-RX-MP87
T285-R-MP21*
N175-RX-MR72
N175-RX-MR73
N175-RX-MR74
N175-RX-MR75
N175-RX-MR76
N175-RX-MR77
N175-RX-MR78
N175-RX-MR79
N175-RX-MR80
N175-RX-MR81
N175-RX-MR82
N175-RX-MR83
N175-RX-MR84
N175-RX-MR85
N175-RX-MR86
N175-RX-MR87
N175-RX-MR88
N175-RX-MR89
N175-RX-MR90
N175-R-MR24*
N175-R-MR25*
N175-R-MR26*
* Round only
C
T285-S-MP100
T285-S-MP101
T285-S-MP102
T285-S-MP103
T285-S-MP104
T285-S-MP105
T285-S-MP106
T285-S-MP107
T285-S-MP108
T285-S-MP109
T285-S-MP110
N175-S-MR100
N175-S-MR101
N175-S-MR102
N175-S-MR103
N175-S-MR104
N175-S-MR105
N175-S-MR106
N175-S-MR107
N175-S-MR108
N175-S-MR109
N175-S-MR110
N175-S-MR111
N175-S-MR112
N175-S-MR113
18
* Round only
www.riten.com
Multibore Collets, DIN 6343
®
Serrated bore
A
C
Dimensions (inches)
Part No.
B
Grip Range
Inch
mm
.15 - .23
.23 - .31
.31 - .39
.39 - .47
.47 - .55
.55 - .63
.63 - .70
.70 - .78
.78 - .86
.86 - .94
.94 - 1.02
1.02 - 1.10
1.10 - 1.18
1.18 - 1.25
1.25 - 1.33
1.33 - 1.41
1.41 - 1.49
1.49 - 1.57
1.57 - 1.65
1.65 - 1.73
1.73 - 1.81
1.81 - 1.89
1.89 - 1.92
1.92 - 2.04
2.04 - 2.12
2.12 - 2.20
2.20 - 2.28
2.28 - 2.36
2.36 - 2.44
2.44 - 2.52
2.52 - 2.59
2.59 - 2.67
2.67 - 2.75
2.75 - 2.83
2.83 - 2.91
2.91 - 2.99
2.99 - 3.07
3.07 - 3.14
4-6
6-8
8 - 10
10 - 12
12 - 14
14 - 16
16 - 18
18 - 20
20 - 22
22 - 24
24 - 26
26 - 28
28 - 30
30 - 32
32 - 34
34 - 36
36 - 38
38 - 40
40 - 42
42 - 44
44 - 46
46 - 48
48 - 50
50 - 52
52 - 54
54 - 56
56 - 58
58 - 60
60 - 62
62 - 64
64 - 66
66 - 68
68 - 70
70 - 72
72 - 74
74 - 76
76 - 78
78 - 80
M673
M677
J660
M673
175E Compatible (4728)
Round
Hex
Square
M677
185E Compatible (4291)
Round
Hex
Square
M673-R-6*
M673-R-8*
M673-R-10
M673-R-12
M673-R-14
M673-R-16
M673-R-18
M673-R-20
M673-R-22
M673-R-24
M673-R-26
M673-R-28
M673-R-30
M673-R-32
M673-R-34
M673-R-36
M673-R-38
M673-R-40
M673-R-42
M677-R-6*
M677-R-8
M677-R-10
M677-R-12
M677-R-14
M677-R-16
M677-R-18
M677-R-20
M677-R-22
M677-R-24
M677-R-26
M677-R-28
M677-R-30
M677-R-32
M677-R-34
M677-R-36
M677-R-38
M677-R-40
M677-R-42
M677-R-44
M677-R-46
M677-R-48
M677-R-50
M677-R-52
M677-R-54
M677-R-56
M677-R-58
M677-R-60
M673-X-6*
M673-X-8*
M673-X-10
M673-X-12
M673-X-14
M673-X-16
M673-X-18
M673-X-20
M673-X-22
M673-X-24
M673-X-26
M673-X-28
M673-X-30
M673-X-32
M673-X-34
M673-X-36
M673-S-6*
M673-S-8*
M673-S-10
M673-S-12
M673-S-14
M673-S-16
M673-S-18
M673-S-20
M673-S-22
M673-S-24
M673-S-26
M673-S-28
M673-S-30
M677-X-6*
M677-X-8
M677-X-10
M677-X-12
M677-X-14
M677-X-16
M677-X-18
M677-X-20
M677-X-22
M677-X-24
M677-X-26
M677-X-28
M677-X-30
M677-X-32
M677-X-34
M677-X-36
M677-X-38
M677-X-40
M677-X-42
M677-X-44
M677-X-46
M677-X-48
M677-X-50
M677-X-52
M677-S-6*
M677-S-8
M677-S-10
M677-S-12
M677-S-14
M677-S-16
M677-S-18
M677-S-20
M677-S-22
M677-S-24
M677-S-26
M677-S-28
M677-S-30
M677-S-32
M677-S-34
M677-S-36
M677-S-38
M677-S-40
M677-S-42
A
B
1.53” 2.42” 14.75°
1.77” 3.36” 14.75°
1.89” 4.27” 14.75°
J660
193E Compatible (H-47)
Round
Hex
Square
J660-R-14
J660-R-16
J660-R-18
J660-R-20
J660-R-22
J660-R-24
J660-R-26
J660-R-28
J660-R-30
J660-R-32
J660-R-34
J660-R-36
J660-R-38
J660-R-40
J660-R-42
J660-R-44
J660-R-46
J660-R-48
J660-R-50
J660-R-52
J660-R-54
J660-R-56
J660-R-58
J660-R-60
J660-R-62
J660-R-64
J660-R-66
J660-R-68
J660-R-70
J660-R-72
J660-R-74
J660-R-76
J660-R-78
J660-R-80
J660-X-14
J660-X-16
J660-X-18
J660-X-20
J660-X-22
J660-X-24
J660-X-26
J660-X-28
J660-X-30
J660-X-32
J660-X-34
J660-X-36
J660-X-38
J660-X-40
J660-X-42
J660-X-44
J660-X-46
J660-X-48
J660-X-50
J660-X-52
J660-X-54
J660-X-56
J660-X-58
J660-X-60
J660-X-62
J660-X-64
J660-X-66
J660-X-68
* All collets marked with * are supplied with plain bore.
Round bore collets are supplied with spiral serrations except those marked with *.
Hexagonal and square collets are supplied with annular serrations except those marked with *.
19
Call 1-800-338-0027
C
J660-S-14
J660-S-16
J660-S-18
J660-S-20
J660-S-22
J660-S-24
J660-S-26
J660-S-28
J660-S-30
J660-S-32
J660-S-34
J660-S-36
J660-S-38
J660-S-40
J660-S-42
J660-S-44
J660-S-46
J660-S-48
J660-S-50
J660-S-52
J660-S-54
J660-S-56
B-42 Spring Collets (inch)
®
Round, Hex and Square
B
D
Dimensions (inches)
C
A
Size
1/16”
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
Round
B42-R-1/16
B42-R-1/8
B42-R-3/16
B42-R-1/4
B42-R-5/16
B42-R-3/8
B42-R-7/16
B42-R-1/2
B42-R-9/16
B42-R-5/8
B42-R-11/16
B42-R-3/4
B42-R-13/16
B42-R-7/8
B42-R-15/16
B42-R-1
B42-R-1-1/16
B42-R-1-1/8
B42-R-1-3/16
B42-R-1-1/4
B42-R-1-5/16
B42-R-1-3/8
B42-R-1-7/16
B42-R-1-1/2
B42-R-1-9/16
B42-R-1-5/8
Hex
B42-H-1/16
B42-H-1/8
B42-H-3/16
B42-H-1/4
B42-H-5/16
B42-H-3/8
B42-H-7/16
B42-H-1/2
B42-H-9/16
B42-H-5/8
B42-H-11/16
B42-H-3/4
B42-H-13/16
B42-H-7/8
B42-H-15/16
B42-H-1
B42-H-1-1/16
B42-H-1-1/8
B42-H-1-3/16
B42-H-1-1/4
B42-H-1-5/16
B42-H-1-3/8
B42-H-1-7/16
B42-H-1-1/2
A
1.89”
B
C
D
3.7” 2.36” 15°
Square
B42-S-1/16
B42-S-1/8
B42-S-3/16
B42-S-1/4
B42-S-5/16
B42-S-3/8
B42-S-7/16
B42-S-1/2
B42-S-9/16
B42-S-5/8
B42-S-11/16
B42-S-3/4
B42-S-13/16
B42-S-7/8
B42-S-15/16
B42-S-1
B42-S-1-1/16
B42-S-1-1/8
B42-S-1-3/16
Emergency Collet: B42-EC
20
www.riten.com
B-42 Spring Collets (Metric)
®
Round, Hex and Square
B
D
Dimensions (mm)
C
A
21
Size
Round
Hex
Square
Size
1.0mm
1.5mm
2.0mm
2.5mm
3.0mm
3.5mm
4.0mm
4.5mm
5.0mm
5.5mm
6.0mm
6.5mm
7.0mm
7.5mm
8.0mm
8.5mm
9.0mm
9.5mm
10.0mm
10.5mm
11.0mm
11.5mm
12.0mm
12.5mm
13.0mm
13.5mm
14.0mm
14.5mm
15.0mm
15.5mm
16.0mm
16.5mm
17.0mm
17.5mm
18.0mm
18.5mm
19.0mm
19.5mm
20.0mm
20.5mm
21.0mm
21.5mm
B42-R-1.0
B42-R-1.5
B42-R-2.0
B42-R-2.5
B42-R-3.0
B42-R-3.5
B42-R-4.0
B42-R-4.5
B42-R-5.0
B42-R-5.5
B42-R-6.0
B42-R-6.5
B42-R-7.0
B42-R-7.5
B42-R-8.0
B42-R-8.5
B42-R-9.0
B42-R-9.5
B42-R-10.0
B42-R-10.5
B42-R-11.0
B42-R-11.5
B42-R-12.0
B42-R-12.5
B42-R-13.0
B42-R-13.5
B42-R-14.0
B42-R-14.5
B42-R-15.0
B42-R-15.5
B42-R-16.0
B42-R-16.5
B42-R-17.0
B42-R-17.5
B42-R-18.0
B42-R-18.5
B42-R-19.0
B42-R-19.5
B42-R-20.0
B42-R-20.5
B42-R-21.0
B42-R-21.5
B42-H-1.0
B42-H-1.5
B42-H-2.0
B42-H-2.5
B42-H-3.0
B42-H-3.5
B42-H-4.0
B42-H-4.5
B42-H-5.0
B42-H-5.5
B42-H-6.0
B42-H-6.5
B42-H-7.0
B42-H-7.5
B42-H-8.0
B42-H-8.5
B42-H-9.0
B42-H-9.5
B42-H-10.0
B42-H-10.5
B42-H-11.0
B42-H-11.5
B42-H-12.0
B42-H-12.5
B42-H-13.0
B42-H-13.5
B42-H-14.0
B42-H-14.5
B42-H-15.0
B42-H-15.5
B42-H-16.0
B42-H-16.5
B42-H-17.0
B42-H-17.5
B42-H-18.0
B42-H-18.5
B42-H-19.0
B42-H-19.5
B42-H-20.0
B42-H-20.5
B42-H-21.0
B42-H-21.5
B42-S-1.0
B42-S-1.5
B42-S-2.0
B42-S-2.5
B42-S-3.0
B42-S-3.5
B42-S-4.0
B42-S-4.5
B42-S-5.0
B42-S-5.5
B42-S-6.0
B42-S-6.5
B42-S-7.0
B42-S-7.5
B42-S-8.0
B42-S-8.5
B42-S-9.0
B42-S-9.5
B42-S-10.0
B42-S-10.5
B42-S-11.0
B42-S-11.5
B42-S-12.0
B42-S-12.5
B42-S-13.0
B42-S-13.5
B42-S-14.0
B42-S-14.5
B42-S-15.0
B42-S-15.5
B42-S-16.0
B42-S-16.5
B42-S-17.0
B42-S-17.5
B42-S-18.0
B42-S-18.5
B42-S-19.0
B42-S-19.5
B42-S-20.0
B42-S-20.5
B42-S-21.0
B42-S-21.5
22.0mm
22.5mm
23.0mm
23.5mm
24.0mm
24.5mm
25.0mm
25.5mm
26.0mm
26.5mm
27.0mm
27.5mm
28.0mm
28.5mm
29.0mm
29.5mm
30.0mm
30.5mm
31.0mm
31.5mm
32.0mm
32.5mm
33.0mm
33.5mm
34.0mm
34.5mm
35.0mm
35.5mm
36.0mm
36.5mm
37.0mm
37.5mm
38.0mm
38.5mm
39.0mm
39.5mm
40.0mm
40.5mm
41.0mm
41.5mm
42.0mm
42.5mm
Call 1-800-338-0027
Emergency Collet: B42-EC
Round
B42-R-22.0
B42-R-22.5
B42-R-23.0
B42-R-23.5
B42-R-24.0
B42-R-24.5
B42-R-25.0
B42-R-25.5
B42-R-26.0
B42-R-26.5
B42-R-27.0
B42-R-27.5
B42-R-28.0
B42-R-28.5
B42-R-29.0
B42-R-29.5
B42-R-30.0
B42-R-30.5
B42-R-31.0
B42-R-31.5
B42-R-32.0
B42-R-32.5
B42-R-33.0
B42-R-33.5
B42-R-34.0
B42-R-34.5
B42-R-35.0
B42-R-35.5
B42-R-36.0
B42-R-36.5
B42-R-37.0
B42-R-37.5
B42-R-38.0
B42-R-38.5
B42-R-39.0
B42-R-39.5
B42-R-40.0
B42-R-40.5
B42-R-41.0
B42-R-41.5
B42-R-42.0
B42-R-42.5
A
B
C
D
48
94
60
15°
Hex
Square
B42-H-22.0
B42-H-22.5
B42-H-23.0
B42-H-23.5
B42-H-24.0
B42-H-24.5
B42-H-25.0
B42-H-25.5
B42-H-26.0
B42-H-26.5
B42-H-27.0
B42-H-27.5
B42-H-28.0
B42-H-28.5
B42-H-29.0
B42-H-29.5
B42-H-30.0
B42-H-30.5
B42-H-31.0
B42-H-31.5
B42-H-32.0
B42-H-32.5
B42-H-33.0
B42-H-33.5
B42-H-34.0
B42-H-34.5
B42-H-35.0
B42-H-35.5
B42-H-36.0
B42-H-36.5
B42-H-37.0
B42-H-37.5
B42-H-38.0
B42-S-22.0
B42-S-22.5
B42-S-23.0
B42-S-23.5
B42-S-24.0
B42-S-24.5
B42-S-25.0
B42-S-25.5
B42-S-26.0
B42-S-26.5
B42-S-27.0
B42-S-27.5
B42-S-28.0
B42-S-28.5
B42-S-29.0
B42-S-29.5
B42-S-30.0
®
B-60 Spring Collets (inch & Metric)
Round, Hex and Square
B
D
Dimensions (inches)
C
A
A
2.6”
Size
Round
Hex
Square
1/16”
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
1-11/16”
1-3/4”
1-13/16”
1-7/8”
1-15/16”
2”
2-1/16”
2-1/8”
2-3/16”
2-1/4”
2-5/16”
B60-R-1/16
B60-R-1/8
B60-R-3/16
B60-R-1/4
B60-R-5/16
B60-R-3/8
B60-R-7/16
B60-R-1/2
B60-R-9/16
B60-R-5/8
B60-R-11/16
B60-R-3/4
B60-R-13/16
B60-R-7/8
B60-R-15/16
B60-R-1
B60-R-1-1/16
B60-R-1-1/8
B60-R-1-3/16
B60-R-1-1/4
B60-R-1-5/16
B60-R-1-3/8
B60-R-1-7/16
B60-R-1-1/2
B60-R-1-9/16
B60-R-1-5/8
B60-R-1-11/16
B60-R-1-3/4
B60-R-1-13/16
B60-R-1-7/8
B60-R-1-15/16
B60-R-2
B60-R-2-1/16
B60-R-2-1/8
B60-R-1-3/16
B60-R-2-1/4
B60-R-1-5/16
B60-H-1/16
B60-H-1/8
B60-H-3/16
B60-H-1/4
B60-H-5/16
B60-H-3/8
B60-H-7/16
B60-H-1/2
B60-H-9/16
B60-H-5/8
B60-H-11/16
B60-H-3/4
B60-H-13/16
B60H-7/8
B60-H-15/16
B60-H-1
B60-H-1-1/16
B60-H-1-1/8
B60-H-1-3/16
B60-H-1-1/4
B60-H-1-5/16
B60-H-1-3/8
B60-H-1-7/16
B60-H-1-1/2
B60-H-1-9/16
B60-H-1-5/8
B60-H-1-11/16
B60-H-1-3/4
B60-H-1-13/16
B60-H-1-7/8
B60-H-1-15/16
B60-H-2
B60-S-1/16
B60-S-1/8
B60-S-3/16
B60-S-1/4
B60-S-5/16
B60-S-3/8
B60-S-7/16
B60-S-1/2
B60-S-9/16
B60-S-5/8
B60-S-11/16
B60-S-3/4
B60-S-13/16
B60-S-7/8
B60-S-15/16
B60-S-1
B60-S-1-1/16
B60-S-1-1/8
B60-S-1-3/16
B60-S-1/4
B60-S-1-5/16
B60-S-1-3/8
B60-S-1-7/16
B60-S-1/2
B60-S-1-9/16
B60-S-1-5/8
Emergency Collet: B60-EC
B
C
D
4.33” 3.31” 15°
Size
Round
Hex
Square
1.0mm
1.5mm
2.0mm
2.5mm
3.0mm
3.5mm
4.0mm
4.5mm
5.0mm
5.5mm
6.0mm
6.5mm
7.0mm
7.5mm
8.0mm
8.5mm
9.0mm
9.5mm
10.0mm
10.5mm
11.0mm
11.5mm
12.0mm
12.5mm
13.0mm
13.5mm
14.0mm
14.5mm
15.0mm
15.5mm
16.0mm
16.5mm
17.0mm
17.5mm
18.0mm
18.5mm
19.0mm
19.5mm
20.0mm
20.5mm
21.0mm
21.5mm
B60-R-1.0
B60-R-1.5
B60-R-2.0
B60-R-2.5
B60-R-3.0
B60-R-3.5
B60-R-4.0
B60-R-4.5
B60-R-5.0
B60-R-5.5
B60-R-6.0
B60-R-6.5
B60-R-7.0
B60-R-7.5
B60-R-8.0
B60-R-8.5
B60-R-9.0
B60-R-9.5
B60-R-10.0
B60-R-10.5
B60-R-11.0
B60-R-11.5
B60-R-12.0
B60-R-12.5
B60-R-13.0
B60-R-13.5
B60-R-14.0
B60-R-14.5
B60-R-15.0
B60-R-15.5
B60-R-16.0
B60-R-16.5
B60-R-17.0
B60-R-17.5
B60-R-18.0
B60-R-18.5
B60-R-19.0
B60-R-19.5
B60-R-20.0
B60-R-20.5
B60-R-21.0
B60-R-21.5
B60-H-1.0
B60-H-1.5
B60-H-2.0
B60-H-2.5
B60-H-3.0
B60-H-3.5
B60-H-4.0
B60-H-4.5
B60-H-5.0
B60-H-5.5
B60-H-6.0
B60-H-6.5
B60-H-7.0
B60-H-7.5
B60-H-8.0
B60-H-8.5
B60-H-9.0
B60-H-9.5
B60-H-10.0
B60-H-10.5
B60-H-11.0
B60-H-11.5
B60-H-12.0
B60-H-12.5
B60-H-13.0
B60-H-13.5
B60-H-14.0
B60-H-14.5
B60-H-15.0
B60-H-15.5
B60-H-16.0
B60-H-16.5
B60-H-17.0
B60-H-17.5
B60-H-18.0
B60-H-18.5
B60-H-19.0
B60-H-19.5
B60-H-20.0
B60-H-20.5
B60-H-21.0
B60-H-21.5
B60-S-1.0
B60-S-1.5
B60-S-2.0
B60-S-2.5
B60-S-3.0
B60-S-3.5
B60-S-4.0
B60-S-4.5
B60-S-5.0
B60-S-5.5
B60-S-6.0
B60-S-6.5
B60-S-7.0
B60-S-7.5
B60-S-8.0
B60-S-8.5
B60-S-9.0
B60-S-9.5
B60-S-10.0
B60-S-10.5
B60-S-11.0
B60-S-11.5
B60-S-12.0
B60-S-12.5
B60-S-13.0
B60-S-13.5
B60-S-14.0
B60-S-14.5
B60-S-15.0
B60-S-15.5
B60-S-16.0
B60-S-16.5
B60-S-17.0
B60-S-17.5
B60-S-18.0
B60-S-18.5
B60-S-19.0
B60-S-19.5
B60-S-20.0
B60-S-20.5
B60-S-21.0
B60-S-21.5
22
www.riten.com
B-60 Spring Collets (Metric)
®
Round, Hex and Square
B
D
Dimensions (mm)
C
A
Size
22.0mm
22.5mm
23.0mm
23.5mm
24.0mm
24.5mm
25.0mm
25.5mm
26.0mm
26.5mm
27.0mm
27.5mm
28.0mm
28.5mm
29.0mm
29.5mm
30.0mm
30.5mm
31.0mm
31.5mm
32.0mm
32.5mm
33.0mm
33.5mm
34.0mm
34.5mm
35.0mm
35.5mm
36.0mm
36.5mm
37.0mm
37.5mm
38.0mm
38.5mm
39.0mm
39.5mm
40.0mm
40.5mm
41.0mm
Round
B60-R-22.0
B60-R-22.5
B60-R-23.0
B60-R-23.5
B60-R-24.0
B60-R-24.5
B60-R-25.0
B60-R-25.5
B60-R-26.0
B60-R-26.5
B60-R-27.0
B60-R-27.5
B60-R-28.0
B60-R-28.5
B60-R-29.0
B60-R-29.5
B60-R-30.0
B60-R-30.5
B60-R-31.0
B60-R-31.5
B60-R-32.0
B60-R-32.5
B60-R-33.0
B60-R-33.5
B60-R-34.0
B60-R-34.5
B60-R-35.0
B60-R-35.5
B60-R-36.0
B60-R-36.5
B60-R-37.0
B60-R-37.5
B60-R-38.0
B60-R-38.5
B60-R-39.0
B60-R-39.5
B60-R-40.0
B60-R-40.5
B60-R-41.0
Hex
Square
Size
B60-H-22.0
B60-H-22.5
B60-H-23.0
B60-H-23.5
B60-H-24.0
B60-H-24.5
B60-H-25.0
B60-H-25.5
B60-H-26.0
B60-H-26.5
B60-H-27.0
B60-H-27.5
B60-H-28.0
B60-H-28.5
B60-H-29.0
B60-H-29.5
B60-H-30.0
B60-H-30.5
B60-H-31.0
B60-H-31.5
B60-H-32.0
B60-H-32.5
B60-H-33.0
B60-H-33.5
B60-H-34.0
B60-H-34.5
B60-H-35.0
B60-H-35.5
B60-H-36.0
B60-H-36.5
B60-H-37.0
B60-H-37.5
B60-H-38.0
B60-H-38.5
B60-H-39.0
B60-H-39.5
B60-H-40.0
B60-H-40.5
B60-H-41.0
B60-S-22.0
B60-S-22.5
B60-S-23.0
B60-S-23.5
B60-S-24.0
B60-S-24.5
B60-S-25.0
B60-S-25.5
B60-S-26.0
B60-S-26.5
B60-S-27.0
B60-S-27.5
B60-S-28.0
B60-S-28.5
B60-S-29.0
B60-S-29.5
B60-S-30.0
B60-S-30.5
B60-S-31.0
B60-S-31.5
B60-S-32.0
B60-S-32.5
B60-S-33.0
B60-S-33.5
B60-S-34.0
B60-S-34.5
B60-S-35.0
B60-S-35.5
B60-S-36.0
B60-S-36.5
B60-S-37.0
B60-S-37.5
B60-S-38.0
B60-S-38.5
B60-S-39.0
B60-S-39.5
B60-S-40.0
B60-S-40.5
B60-S-41.0
41.5mm
42.0mm
42.5mm
43.0mm
43.5mm
44.0mm
44.5mm
45.0mm
45.5mm
46.0mm
46.5mm
47.0mm
47.5mm
48.0mm
48.5mm
49.0mm
49.5mm
50.0mm
50.5mm
51.0mm
51.5mm
52.0mm
52.5mm
53.0mm
53.5mm
54.0mm
54.5mm
55.0mm
55.5mm
56.0mm
56.5mm
57.0mm
57.5mm
58.0mm
58.5mm
59.0mm
59.5mm
60.0mm
60.5mm
23
Emergency Collet: B60-EC
Call 1-800-338-0027
Round
B60-R-41.5
B60-R-42.0
B60-R-42.5
B60-R-43.0
B60-R-43.5
B60-R-44.0
B60-R-44.5
B60-R-45.0
B60-R-45.5
B60-R-46.0
B60-R-46.5
B60-R-47.0
B60-R-47.5
B60-R-48.0
B60-R-48.5
B60-R-49.0
B60-R-49.5
B60-R-50.0
B60-R-50.5
B60-R-51.0
B60-R-51.5
B60-R-52.0
B60-R-52.5
B60-R-53.0
B60-R-53.5
B60-R-54.0
B60-R-54.5
B60-R-55.0
B60-R-55.5
B60-R-56.0
B60-R-56.5
B60-R-57.0
B60-R-57.5
B60-R-58.0
B60-R-58.5
B60-R-59.0
B60-R-59.5
B60-R-60.0
B60-R-60.5
A
B
C
D
66
110
84
15°
Hex
Square
B60-H-41.5
B60-H-42.0
B60-H-42.5
B60-H-43.0
B60-H-43.5
B60-H-44.0
B60-H-44.5
B60-H-45.0
B60-H-45.5
B60-H-46.0
B60-H-46.5
B60-H-47.0
B60-H-47.5
B60-H-48.0
B60-H-48.5
B60-H-49.0
B60-H-49.5
B60-H-50.0
B60-H-50.5
B60-H-51.0
B60-H-51.5
B60-H-52.0
B60-H-52.5
B60-S-41.5
B60-S-42.0
B60-S-42.5
DRAWTUBE CONNECTOR SPECIFICATIONS
Spindle Nose Without Chuck
A Custom Threaded Connector is required
to connect the draw tube of your machine to
the collet chuck. For proper actuation, please
complete this form as accurately as possible.
THD
D
Company: ____________________
Contact: _____________________
E
Tel:
_____________________
C
Collet Chuck __________________________
Purchase Order ________________________
Machine Make & Model _________________
_____________________________________
A1 MAX.
A2 MIN.
Sub Spindle / Main Spindle (Circle One)
B1 MAX.
B2 MIN.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
A1 – Tube Extended _________________
THD _____________________________
A2 – Tube Retracted _________________
Internal / External
(circle one)
B1 – Tube Extended _________________
Pitch _____________________________
B2 – Tube Retracted _________________
Length ____________________________
C – Counterbore Dia _________________
D – Counterbore Depth_______________
Tel: 800-338-0027
Website: www.Riten.com
Fax: 800-338-0717
Accuracy Chart
®
5C, 16C and R8 Collets
A
B
Bore Size
Center or A/Flat
A
Round
B
Test Length
1.0mm
0.039”
1.0mm - 1.5mm
0.039” - 0.059”
1.5mm - 3.0mm
0.059” - 0.118”
3.0mm - 6.0mm
0.118” - 0.236”
6.0mm - 10.0mm
0.236” - 0.394”
10.0mm - 19.0mm
0.394” - 0.748”
19.0mm - 25.4mm
0.748” - 1.0”
25.4mm - 32mm
1.0” - 1.26”
32mm - 50.8mm
1.26” - 2.0”
Over 50.8mm
2.0”
0.007mm
0.0003”
0.010mm
0.0004”
0.020mm
0.0004”
0.010mm
0.0004”
0.010mm
0.0004”
0.015mm
0.0006”
0.015mm
0.0006”
0.020mm
0.0008”
0.020mm
0.0008”
0.020mm
0.0008”
3.0mm
0.125”
6.5mm
0.250”
9.5mm
0.375”
16mm
0.625”
25.5mm
1.0”
38.0mm
1.5”
51.0mm
2.0”
63.5mm
2.5”
76.0mm
3.0”
101.5mm
4.0”
25
Call 1-800-338-0027
Accuracy Charts
®
Multibore and DIN 6343
Multibore Collets
A
B
B Type Spring Collets
A
B
Multibore and B Type Spring Collets
Bore Size
Center or A/Flat
Round
1.0mm
0.039”
1.0mm - 1.5mm
0.039” - 0.059”
1.5mm - 3.0mm
0.059” - 0.118”
3.0mm - 6.0mm
0.118” - 0.236”
6.0mm - 10.0mm
0.236” - 0.394”
10.0mm - 19.0mm
0.394” - 0.748”
19.0mm - 25.4mm
0.748” - 1.0”
25.4mm - 32mm
1.0” - 1.26”
32mm - 50.8mm
1.26” - 2.0”
Over 50.8mm
2.0”
0.015mm
0.0006”
0.020mm
0.0008”
0.020mm
0.0008”
0.020mm
0.0008”
0.020mm
0.0008”
0.030mm
0.0012”
0.030mm
0.0012”
0.040mm
0.0016”
0.040mm
0.0016”
0.040mm
0.0016”
Bore Size
Center or A/Flat
Round
A
Hex & Square
0.046mm
0.0018”
0.060mm
0.0024”
0.060mm
0.0024”
0.060mm
0.0024”
0.060mm
0.0024”
0.091mm
0.0036”
0.091mm
0.0036”
0.120mm
0.0048”
0.120mm
0.0048”
0.120mm
0.0048”
A
Hex & Square
B
Test Length
3.0mm
0.125”
6.5mm
0.250”
9.5mm
0.375”
16mm
0.625”
25.5mm
1.0”
38.0mm
1.5”
51.0mm
2.0”
63.5mm
2.5”
76.0mm
3.0”
101.5mm
4.0”
B
Test Length
1.0mm
0.039”
1.0mm - 1.5mm
0.039” - 0.059”
1.5mm - 3.0mm
0.059” - 0.118”
0.015mm
0.0006”
0.020mm
0.0008”
0.020mm
0.0008”
0.046mm
0.0018”
0.060mm
0.0024”
0.060mm
0.0024”
3.0mm
0.125”
6.5mm
0.250”
9.5mm
0.375”
3.0mm - 6.0mm
0.118” - 0.236”
6.0mm - 10.0mm
0.236” - 0.394”
10.0mm - 19.0mm
0.394” - 0.748”
19.0mm - 25.4mm
0.748” - 1.0”
25.4mm - 32mm
1.0” - 1.26”
32mm - 50.8mm
1.26” - 2.0”
Over 50.8mm
2.0”
0.020mm
0.0008”
0.020mm
0.0008”
0.030mm
0.0012”
0.030mm
0.0012”
0.040mm
0.0016”
0.040mm
0.0016”
0.040mm
0.0016”
0.060mm
0.0024”
0.060mm
0.0024”
0.091mm
0.0036”
0.091mm
0.0036”
0.120mm
0.0048”
0.120mm
0.0048”
0.120mm
0.0048”
16mm
0.625”
25.5mm
1.0”
38.0mm
1.5”
51.0mm
2.0”
63.5mm
2.5”
76.0mm
3.0”
101.5mm
4.0”
26
www.riten.com
Workholding solutions, not excuses!
Face Drivers
Single-operation machining
Live and Dead Centers
Super Duty Live Centers
The world’s largest selection
For workpieces up to
450,000 lbs.
RITEN INDUSTRIES WARRANTY – DISCLAIMER OF WARRANTY
LIMITATION OF DAMAGES – DISCLAIMER OF LIABILITY
Riten warrants that its products shall be free from defects in material and
workmanship under normal use when correctly installed and maintained.
This warranty of quality shall terminate one year after delivery of the products
to the buyer and shall not apply to products which have been subjected to
accident, misuse, abuse, neglect or improper storage, handling or
maintenance.
BUYER’S SOLE AND EXCLUSIVE REMEDY AGAINST RITEN FOR BREACH
OF WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF
ANY NONCONFORMING PRODUCTS, PURSUANT TO THE ABOVE STATEMENT OF WARRANTY.
THIS STATEMENT OF WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES
WITH RESPECT TO THE PRODUCTS, EXPRESS OR IMPLIED, WHETHER
WRITTEN OR ORAL, STATUTORY, BY OPERATION OF LAW OR OTHERWISE. THERE IS NO – AND RITEN DISCLAIMS ANY – WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE OR
WARRANTY ARISING BY USAGE OF TRADE OR PERFORMANCE OR
COURSE OF DEALING.
Any affirmation of fact, description, sample, model or promise made or provided
by Riten, other than the aforementioned Statement of Warranty, shall not create
a warranty and shall not be part of the basis of the parties’ bargain.
RITEN SHALL NOT BE LIABLE TO BUYER OR ANY OTHER PERSON FOR
ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY
LOSSES, DAMAGES OR EXPENSES, DIRECTLY OR INDIRECTLY ARISING
OUT OF THE SALE, HANDLING OR USE OF THE PRODUCTS OR FROM
ANY OTHER CAUSE RELATING THERETO. RITEN’S LIABILITY WHETHER
BASED ON CONTRACT, WARRANTY OR TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE AND STRICT LIABILITY) OR OTHERWISE IS LIMITED TO, AT RITEN’S OPTION, THE REPAIR OR REPLACEMENT OF NONCONFORMING PRODUCTS OR THE REPAYMENT OF, OR CREDITING
BUYER WITH, AN AMOUNT EQUAL TO THE PURCHASE PRICE UPON
RETURN OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IF RITEN
PERFORMS UNDER THIS LIMITED REMEDY, SUCH LIMITED REMEDY
SHALL NOT HAVE FAILED ITS ESSENTIAL PURPOSE.
®
Distributed By:
Quality workholding since 1933
Riten Industries, Inc.
1100 Lakeview Avenue ■ P.O. Box 340
Washington Court House, OH 43160 USA
740-335-5353 ■ FAX 740-335-4622
E-mail: [email protected]
www.riten.com
UIC #662503, FSC #3460, CAGE #05467, Harmonized Schedule B, 8466.20.1010, 8466.20.1090