WWW.COMLY.COM

Transcription

WWW.COMLY.COM - MyEquipAuctions.com

www.myequipauctions.com
industrial division
construction
division
the weekly digital marketplace for construction auctions
the weekly digital marketplace for industrial auctions - October 16, 2014
EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT
FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •
EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT
industrial
division
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS
• EQUIPMENT
FOR SALE •
ALUMINUM,
STAINLESS
& PLASTICS FOR
INVENTORY
BE SOLD VIA
SEALED BID• SALE
EQUIPMENT
AUCTIONS
• EQUIPMENT
SALE •WILL
EQUIPMENT
AUCTIONS
EQUIPMENT
FOR SALE • EQUIPMENT
AUCTIONS
• EQUIPMENT
FOR
SALE MD
• EQUIPMENT
AUCTIONS •
7280 Baltimore
Annapolis
Blvd • Glen
Burnie,
21061
EQUIPMENTBID
FORONSITE
SALE • EQUIPMENT
AUCTIONS
• EQUIPMENT
OR ONLINE:
WED., NOV.
5TH 9:30FOR
AMSALE
(EST)• EQUIPMENT
AUCTIONS • EQUIPMENT
SALENOVEMBER
• EQUIPMENT
AUCTIONS
FOR SALE •
INSPECTION:FOR
TUESDAY,
4TH FROM
9:00 AM •TOEQUIPMENT
4:00 PM
EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •ByEQUIPMENT
FOR SALE • EQUIPMENT
Order Of:
Late
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR
SALE •M
Eq
Major
Bidding
Starts:
Tuesday,
N
EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS
• EQUIPMENT
FOR SALE
• EQUIPMENT
Bidding
Closes:
Wednesday,
Featuring
Trailers,
Loader
Lifts, Racking,
& More
AUCTIONS
• EQUIPMENT
FOR Forklifts,
SALE • EQUIPMENT
AUCTIONS
• EQUIPMENT
FOR SALE •
Location:
Fort
Mill,
EQUIPMENT
AUCTIONS
• EQUIPMENT
FOR SALE
• EQUIPMENT
• EQUIPMENT
• 2007 Koike
Aronson
CNC Plasma
• CNC
HorizontalAUCTIONS
Cutting Saws
FOR SALE
• EQUIPMENT
FOR SALE
• EQUIPMENT
Cutting
System AUCTIONS • EQUIPMENT
• Sander,
Shear,
Radial Drill AUCTIONS •
EQUIPMENT
FOR CNC
SALE Waterjet
• EQUIPMENT
AUCTIONS
• EQUIPMENT
SALE • EQUIPMENT
• 2005 Flow
System
• Vacuum
& SheetFOR
Lifters
SALE • EQUIPMENT
• EQUIPMENT
ONLINE AUCTIONS
BIDDING PROVIDED
BY: FOR SALE • EQUIPMENT AUCTIONS •
FOR WEBSITE
SALE • EQUIPMENT
AUCTIONS
• EQUIPMENT FOR
VISIT OUR
FOR MORE
INFO!
SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •
FEATUR
EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS
•
EQUIPMENT
FOR
SALE
•
EQUIPMENT
• Toolroom
• 2011 Hot Press
• Welders FOR
• CNC Machining
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT
• Saws
Center
and Waterjet With
In
Conjunction
SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •
AUCTIONS
EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR
Email: •[email protected]
Equipment Auctions Wordwide
http://www.bidspotter.com/forms/event.php?event=21279
SALEPhone:
• EQUIPMENT
FOR
SALE
• EQUIPMENT AUCTIONS •
203. 488.7020
•
www.TheBranfordGroup.com
(215) 634-2500
www.thebrandfordgroup.com
Auction
License
William J. Gardner,
EQUIPMENT
FOR
SALE
• EQUIPMENT
AUCTIONS • EQUIPMENT FOR
SALE
• EQUIPMENT
Anne Arundel
County
Auctioneers
License #A000442
203-488-7020
INDUSTRIAL
AUCTIONS
SALE
• EQUIPMENT
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •
1
ONSITE & ONLINE AUCTION
E-J Enterprises, Inc.
ONLINE A
WWW.COMLY.COM
www.myequipauctions.com
industrial division
Click Here to Visit our
http://www.industrialmachinetrader.com/calendar/AuctionsCalendar.cfm?calendar_type=AU
Auction Calendar
INDEX
Browse the publication
page-by-page to view all
industrial auctions
- OR -
Click below to go directly to the
region of your choice.
Looking for a specific piece of equipment?
Use the search button located at the bottom of each page
to directly link you to the equipment you need.
East
South
Midwest
West
Online/International
2
East
Hydraulic Cylinder Manufacturer
Plant Closed
MID-ATLANTIC MFG. & HYDRAULICS, INC.
708 Milk Plant Road, Rural Retreat, Virginia 24368
Sale Date: Wednesday, November 12 at 12:00 Noon
Inspection: Day Prior from 12:00 Noon to 4:00 PM
FEATURING: (2) Mitsubishi Model M-H-30-D CNC Horz. Machining
Centers, Warner & Swasey Titan Model 6167 Four-Axis Universal CNC
Turning Center, 18” x 120” Warner & Swasey Model SC20 CNC Turning
Center, 28” x 98” Warner & Swasey SC25 Model 4500 CNC Turning
Center, Cincinnati Milacron Model 18” x 60” Cincinnati Milacron
Model ML Shaft Cinturn CNC Turning Center, 18” x 40” Cincinnati
Milacron Cinturn CNC Chucking Lathe, 100 Ton Hannifin Model
S1000-41-SP C-Frame Hyd. Press, 150 Ton Hannifin Model F-150-41X-SP C-Frame Hyd. Press, Sierra Hyd. Cylinder Skiving & Burnishing
Machine, 12’ x 16” Dia. Cylinder Polishing Machine, Wisconsin EWN510- 6G Natural Gas Batch Oven, Kearney & Trecker Model 430TF
Vert. Milling Machine, Kearney & Trecker No. 6 Vert. Milling Machine,
Radial Arm Drills, Toolholders, Tooling & Machine Accessories.
15% On-Site & 18% On-Line Buyers Premium
Live on the Internet via:
Jeffrey L. Luggen / Auctioneer
http://www.bidspotter.com/en-us/auction-catalogues?ClientId=31a184ec-96cd-4b95-b068-a289013196cf
farming division
construction division
industrial division
3
East
LIVE & WEBCAST AUCTION
PROCESSING, UTILITY & LAB EQUIPMENT
FROM TRELLEBORG OFFSHORE!
AUCTION HIGHLIGHTS
FEATURED ITEMS
•
•
•
•
•
•
•
•
•
•
•
•
Design Integrated Technologies 50 Gallon Helicone Nauta Mixer
PDC Machines 2 Gallon Stainless Steel Reactor
Unused Flexicon Twenty Five Foot auger - Screw Elevator
Sweco Screener Sifting System
One Pump Skid with Three Lutz - JESCO 5711-36 Metering Pump
Lancaster Machine Company 3536 Original Radial Arm Saw
Jet HBS-1018W Horizontal Band Saw
Bridgeport 26754 Milling Machine
Process Heating Corp. Walk In Conditioning - Enviromental Chamber TG2
Wabash 30-15-2TMB Hydraulic Press
Hein Werner Winner 2 Ton Hoist
Alliance Corp Regenerative Thermal Oxidizer
DATE | TIME
October 29, 2014 - 11:00 AM ET
INSPECTIONS
Open inspections will be held on October 28 from 9:00 AM ET until 4:00 PM ET
and on October 29 from 9:00 AM ET until 11:00 AM ET.
LOCATION
290 Forbes Bvd.
Mansfield,MA02048
WWW.EQUIPNET.COM/TRELLEBORG1029
farming division
7 Dan Rd. Canton, MA 02021 | 781.821.3482 x2162 | [email protected]
4
industrial division
South
Thursday, November 13th • 10:30 AM ET
106 Garden Lane • La Follette, TN
farming division
industrial division
5
South
BOARD OF DIRECTORS ORDERS SOLD AT AUCTION
BUSINESS CLOSED • TOTAL LIQUIDATION
NORDICA MARINE & NORDICA ENGINEERING
THURS • OCT 30
AT 10 AM
500 NE 191 ST
MIAMI • FL
INSPECT: 8AM-10AM DAY OF AUCTION • 441 / STATE RD 7 TO NE 191 ST (BETWEEN MIAMI GARDENS DR & IVES DAIRY RD), E
20,000 SQ.FT. • WELL MAINTAINED • NEW & LIKE NEW
POWER TOOLS • TOOLS
EQUIPMENT • MACHINERY
INVENTORY • MORE
100+ WELDERS: LINCOLN • ARISTOARC • RACE • DAYTON • MILLER
LARGE QUANTITY WELDING CABLES, WIRE, RODS & MORE
TILE SAWS • CLEANING MACHINES
1,000+ POWER TOOLS
HYDRAULIC JACKS • PIPE THREADERS
HAMMERS • SHEARS • GRINDERS • GUNS RIGID PRODUCTS • TAP & DIE SETS
SANDERS • DRILLS • PLANERS • MORE SOCKET SETS • IMPACT DRIVER SETS
REGULATORS • TORCH SETS
OVER $1 MILLION VALUE
METERS • MIXERS • CRIMPERS
GEORGE
FISCHER & GEBERIT MAPRESS
CLAMPS • FLOOR SCRAPERS
PIPING • FITTINGS • COPPER • STAINLESS STEEL
OVER 50 JOB BOXES
OVER 2,000 HAMMERS, WRENCHES, SAWS, & ASSORTED TOOLS
SHELVING • OFFICE FURNITURE
AUCTIONEER'S NOTE
BUSINESS MACHINES • MORE
IN OVER 50 YEARS IN BUSINESS STAMPLER AUCTIONS HAS NEVER SEEN
AN AUCTION INVENTORY LIKE THIS.
SOMETHING FOR EVERYONE - SELLING
IN SUITABLE LOTS. ALL INFO INCLUDING
LOT LIST, PHOTOS & TERMS ONLINE AT
www.stamplerauctions.com!
DON'T MISS IT!! . . . SEE Y'ALL THERE!!!
AB 196
AU 295
T
E
R
M
S
•
•
•
•
•
•
•
15% BUYERS PREMIUM (CASH BUYERS)
IMMEDIATE DEPOSIT REQUIRED
FINAL PAYMENT BY OCT 31 AT 12 NOON
FINAL REMOVAL BY OCT 31 & NOV 1 (8-5)
CASH OR CASHIER'S CHECKS (15% BP)
CREDIT CARDS & DEBIT CARDS (20% BP)
NO PERSONAL OR COMPANY CHECKS
WITHOUT BANK GUARANTEE LETTER
AUCTIONEERS AS AGENTS
1914 TIGERTAIL BOULEVARD
DANIA FL 33004
954.921.8888
• 800.330.BIDS
www.stamplerauctions.com
farming division
www.stamplerauctions.com
6
industrial division
Midwest
farming division
industrial division
7
Midwest
On-Site Lake County
Municipal Vehicle & Equipment Auction
Saturday, October 25th - 9:00 am
Inspection and Registration: Friday from 9:00 am to 5:00 pm
and Auction Day from 8:00 am
Lake County Fairgrounds
1060 E. Peterson Road, Grayslake IL 60030
Municipal & Seized vehicles, Dump-Pickup-Plow trucks,
Landscape equip., JD 401D Loader Tractor, Mowers,
Toro Workman Utility Carts, Many Misc. Items
OBENAUF
AUCTION SERVICE, Inc.
Round Lake, IL #444.000105
847-489-1820
www.ObenaufAuctions.com
8
AHEEEHAPBCFOMPPFAODJJPAHEEEHA
BNFFFNBPFCECMOFCAPFHIPBNFFFNB
GNIFAHFBADLFBAPNICKDOFPLDPBDG
NCHFOOFJDFGOJBLGBNNFMOACLJMLA
HDGFFAFIKMMJBLCNDPCJBPOCKKKLN
MNFNFFEHIHMJPHAGHGJEAHFHAAHHP
APBBBPAPDGHHJCGNHJLGDBGAFOIJM
HHHHHHHPHHHHPPHPPPPHHPPPHHPPP
farming division
industrial division
Midwest
http://www.bidspotter.com/en-us/auction-catalogues/bscpe/catalogue-id-bscper10066
[email protected]
[email protected]
farming division
industrial division
www.perfectionindustrial.com
9
Midwest
Precision CNC Machining Facility / Plant Closed By Order of the United States Bankruptcy Court
Eastern District of Tennessee • Southern District of Chattanooga
Case No. 14-10532
EAST TECH COMPANY DESIGN & MANUFACTURING
3115 Freeman St., Chattanooga, TN 37406
Sale Date: Tuesday, November 18th • 9:00 AM
Inspection: Day Prior from 10:00 AM to 4:00 PM
Mazak CNC Turning & Machining Centers: 2004 Mazak VTC 300C Vertical Machining
Center, (2) 2008 Mazak 510C-II VMC’s, (2) 2006 Mazak • 510C VMC’s, (2) 2008 Mazak
QTN 350-II CNC Turning Centers, 2005 Mazak • QTN 350 CNC Turning Center, 2004 Mazak
QTN-200 CNC Turning Center & Lg. Qty. Tooling. EDM Machines: 2005 Mitsubishi FA20S
Wire EDM, 2007 Hansvedt MX20 EDM Machine. Machine Tools: (2) 2001 & 2004 Acer High
Precision Vert. Milling Machines, DC Morrison Model KX1 1 ¼” Key-Seater, • 2002 Acer AGS1224AHD Surface Grinder, Sharp RD-1230 Radial Drill, 2004 • Acer 1440G Precision Lathe,
Lucifer R07 KHE-24 Heat Treat Furnace. Horz. & Vert. Band Saws: 2006 HEM Cyclone
Auto-C Horz. Band Saw, 2003 DoAll C-916S Horz. Band Saw, Do All Contour Vert. Band
Saw. • CMM/QA/Inspection/Welders: 2007 Zeiss Contura G2 RDS CMM, 2009 • Telesis
20FQ Laser Marking System, 2007 Rockwell Qualirock Advanced Digital Hardness Tester,
Miller Deltaweld 452, Miller Tig Welder, Esab Migmaster 250 Welder. Material Handling &
Plant Support: Caterpillar C6000 Propane Forklift Truck, Caterpillar G015 Propane Forklift
Truck, • 2006 Kaeser ASD30T 30HP Air Compressor, EZ Go Golf Cart, Tennant Model T5
Fast Walk Behind Floor Sweeper/Scrubber, Lg. Qty. Shop & Support Equipment.
Live on the Internet via:
farming division
10
industrial division
Midwest
HUGE PUBLIC AUCTION!
PRECISION MACHINE SHOP
BY ORDER OF THE BANKRUPTCY COURT
WEDNESDAY, OCTOBER 21 • 11:00 A.M.
By order of the U.S. Bankruptcy Court, Southern District of Texas,
Allison D. Byman Trustee, Case #13-37770 at the premises of
ULTIMATE EDGE
MACHINING SERVICES, LLC
2453 N. Pinewood Lane
Conroe, TX 77306
Bid on-site or bid via
CNC LATHE: Okuma LB3511-C2000 Super Big Bore A2-15, 2013, 24” 3-jaw Kitagawa pwr. chuck, 78” centers, 40
HP, OSP-P200LA CNC control
CNC VERT. MACHINE CENTER: Bridgeport GX1600-50, 2013, Travels: 63”X, 27”Y, 25”Z, 25HP, 32 pos. ATC,
wired for 4th axis, Fanuc Oi-MD ctrl.
PRECISION ACCESSORIES TOOLING & QC EQUIP: Incl. KOMA 18” 4TH axis rotary indexer, 2013 • Schmidt 18”
steadyrest, 2013 • Carbide insert tool holders • Boring Bars • Inserts • Q.C. & Measuring Instruments • Vises
SHOP SUPPORT EQUIP.: Rolling Tools Cabinets • Transformers • More
AIR COMPRESSOR & DRYER: Polar Air 10 HP rotary screw type, 2013 • Polar Air Combo Refrig. Air dryer and air
receiver, 2013
FORKLIFTS: CAT 6,000 lb. Mld. C6000, LPG, 2010 • Linde 6,000 lb. cap. Mdl. H30D diesel, 2009 • Mitsubishi
4,000 lb. LPG, compact mast
PEDESTAL JIB CRANE: 2T. cap X10’ Ht. X 18’ reach w/2 T. hoist, 2013
(2) UTILITY TRAILERS: Falcon 18’ flatbed, 2013 • Echo ATV/Utility type
OFFICE FURNITURE & EQUIPMENT
DON’T MISS THIS SALE!!!
BUYER’S PREMIUM: 15% onsite, 18% webcast
INSPECTION: Tuesday, October 20, 2014 from 9:00 a.m. to 4:00 p.m. and the morning of the sale.
AUCTIONEER: Ron Moore TX Lic. #7314
PAYMENT TERMS: Cash, Cashiers Check,Wire Transfer OR Company Check with letter from bank guaranteeing
payment to PMI.
BUYER’S PREMIUM: 15% Onsite, 18% Webcast
INSPECTION: Tuesday, October 14, 9:00 a.m. to 4:00 p.m. and morning of sale.
AUCTIONEER: Ron Moore AR Lic. #1348
PAYMENT TERMS: Cash, Cashiers Check, Wire transfer OR Company Check with letter from bank guaranteeing payment to PMI.
farming division
industrial division
11
International/Online
LIVE ONSITE AND WEBCAST AUCTION
FIBERGLASS INDUSTRIES, INC.
WEDNESDAY, NOVEMBER 12th • 10:30 AM (EST)
INSPECTION: Tuesday, November 11th • 9 AM to 4 PM • Amsterdam, New York
Complete Closure of Fiberglass Manufacturing Facility, By Order of Fiberglass Industries, Inc.,
Including; Stainless Steel Mixing Tanks, Dietze & Schell Winders, Ovens, Boilers, Generators, Air Compressors, Lab Equipment, Vehicles,
Plant Support, Scrap Metal, etc.
FEATURED ITEMS
•(9) Dietze & Schell Direct Roving Winders Models:
DS330/2-2 & DS360/2-2 (New 2012
•Lantech Rotary Stretch Pallet Wrapper Q Series, S/N
QA003537, w/Weber Labeler System Model 5200
w/ Zebra #170PAX4 Label Head
•Caterpillar 500 KVA Prime Backup Generator, S/N
G6B01245 (New 2005), Approx. 450 Hours, Model
LC 6, Engine Model 3406, Cat Identification #:
CAT00000TC5G00606
•McQuay Chilling System Model WDC063MA, S/N
STNU081200062 (New 2009), w/Chilling Towers,
Circulation Pumps, Lakeside Water Treatment
System, Filter Tanks, Pumps and Meters
•Ingersoll Rand 200 HP Rotary Screw Air Compressor
Motdel IRN200H-2S, S/N NFF0563U08256, (New
2008)
•Reymsa Model HRFG812120, 1-Fan 20-HP Cooling
Tower, (New 2008), 20-HP Motor
•Ingersoll Rand 100 HP Rotary Screw Air Compressor
Model IRN100H-CC, S/N NV8962U10344 (New
2010)
•Reymsa Model HRFG812120, 1-Fan 20-HP Cooling
Tower, (New 2009), 20-HP Motor
•Reymsa Model HRFG816215, 2-Fan Cooling Tower,
(New 2008), 850-RPM Back Up Speed, 15-HP
Motor, 1,365-Gallon/Min
•York Shipley Generator/Boiler Model 560-SPH
175X-S150-N, S/N 07-21985 (New 2007),
6,000,000 BTU, Gas Fired
•Wabash Platen Press Model MIL-125-2424-6IM, 250
Ton, S/N 6943
•York Shipley Steam-Pak Generator/Boiler Model SPH175N-187382, S/N 81-114164-H-81675 (New
1981), 6,000,000 BTU, Gas Fired
•Instron Model 1125, 20,000-Lb. Load Cell Tensile
Tester, S/N 6619
•(15+) Stainless Steel Mixing Tanks, Various Sizes
•Instron Model 3369, 50KN Load Cell Tensile Tester,
S/N 67364
•Morehouse Cowles Dissolver Model 2TV2045, Dual
Shaft and Drive Dissolver, S/N LA800 (New 2008),
with (1) 15-Hp.Motor, (1) 7.5-Hp. Motor and
350-Gallon Stainless Steel Mixing
•Hyster 5,000 Lb Forklift Model S50XL, S/N
A187V15631K, Side Shift, Quad Mast
•Taillift 5,000 Lb LPG Forklift Model 5G25C, S/N
410270, Triple Mast, Side Shift
•1991 Peterbilt 6 x 4 Diesel Truck Tractor, VIN:
1XP5DR9X2NN313087
•2006 Buick Model Lecerne Automobile, VIN:
1G4HP57266U177071, 160K Miles
•2007 Toyota Model Camry Automobile, VIN:
JTNBK46K173001441, 265K Miles
•2012 Ford Model Taurus Automobile, VIN:
1FAHP2EW0CG138422, 66K Miles
•2012 Ford Model Taurus SEL Automobile, VIN:
1FAHP2EW8CG126583, 52K Miles, Gold, Leather
• GREAT Scrap Metal Opportunity Tons of Scrap Items
& Scrap Metal Available!!
•Complete Laboratory - Maintenance Department
Material Handling Equipment, Batch Processing
Equipment - Plant Support
Powered by:
ONLINE AUCTION - INTERNET BIDDING ONLY
METAL MASTERS
www.bidspotter.com/forms/clientupcoming.php?clientname=132
WEDNESDAY, NOVEMBER 19th •1:00 PM (EST)
New Haven, Connecticut
By Order of Metal Masters, Complete Plant Closure, Including: Press Brakes, Shears, Punch Presses,
CNC Machining & Turning Centers, Bending Rolls, Machine Tools, Welding Equipment, Material
Handling, Vehicles, Plant Support, etc.
FEATURED ITEMS
•Pacific 14’ X 200 Ton Press Brake Model K200-14, S/
N5446, 1/4" Cap.
•Pacific 10’ x 100 Ton Press Brake Model 100-10, S/N 1286,
Hydraulic
•Chicago Dries & Krump 6’ x 75 Ton Press Brake Model 46-C,
S/N L-13769
•Press & Shear Machinery Co. 10’ x ¼” Hydro Shear S/N
1014XBHA67576, FOBG
•Niagara 8’ x ¼” Power Squaring Shear, No. 896
•Aronson Welding Positioner Model HD10MTCR
•Whitney 50 Ton Punch Press Model 653-50, S/N 653-18530080
•W.A. Whitney CNC Turret Punch Press, Model Pulsa 620,
S/N P25284; 620-001-37798, 20-Station, Westinghouse
CNC Control, ¼” Cap.
•Eagle Bending Rolls Model CP-40, S/N 396
•Webb 6' X 8" Drop End Pinch Rolls Model R3LR-8006, S/N
7267, 3/8" Capacity
•Giddings & Lewis 4" Horizontal Boring http://www.bidspotter.com/forms/event.php?event=19651
Mill, Model 340-T, S/N •Supermax CNC Slant Bed Turning Center Model YCM-TC-2,
7372, W/ 96" Table, DRO
S/N 907088, Fanuc Series O-T Controls
Buyer's Premium: 15%
REGISTRATION & BIDDING AT:
•Sharnoa CNC Vertical Machining Center Model SDC 30-7.5,
S/N 850196, ATC, Tiger CNC Control
•Hyster 5000 lb. LPG Forklift Model H50J, S/N F003D03112E,
Pneumatic Tires, Triple Mast, Side Shifter
•Uni-Hyro Ironworker Model 50-15, S/N 3PE1413, 50 Ton
•Ford E350 Box Truck, 15' Box, Automatic
•International Stake Body Truck, Diesel, 20' Rack Body
Powered by:
WWW.THOMASAUCTION.COM
Thomas Industries
Guilford, CT 06437
EMAIL: [email protected]
Phone: 203-458-0709
"Worldwide Auctions & Appraisals Since 1947"
farming division
Auction License #AU481
12
industrial division
online only auction
CUSTOM METAL FABRICATor
Sentry Metal Services
401 47th st. • Niagara Falls • New york 14304
SALE DATE:
Online Bidding Ends: Tuesday October 28th • starting at 1 P.M. (EST)
One Day Onsite Inspection: Monday, October 27th from 8am to 4pm
Auction Highlights:
Plate Rolls: ¼” x12’ Niagara Mdl.10-144 Initial Pinch Roll, ¼”x5’(apprx) Pyramid Type; Power Shears: 3/8” x10’ HTC
Mdl. 375-10A Hydraulic, ¼” x 12’ Niagara Mdl. 812; Press Brake: 300 Ton x 10” Best C-300-10 Hydraulic; Welding
Positioners: 25,000# Ransome Mdl. 250P, 5000# Automated Technologies, 2500# Aronson HD25, 1000# Ransome
Mdl 10-8, 250# Ransome B-25; Tank Turning Rolls: Aronson & Teledyne Readco – up to approximately 30,000#; Shot
Blast System, Pass Thru Conveyor: Gutmann 6-Head Type RZ1500/18 with Recovery; Seam Welder: Pandjiris Mdl. 12
with Thermal Arc “Arc-Master” 351 Power Supply, Rolling Table: Plasma Table: K.N. Aronson Mdl VP-96 Single Torch,
Lynx 85 control, Hypertherm Max 100, 96” x 144” Table; Manipulator: 6’x6’ Automated Welding Technologies (no power supply); Offset Machine: Webb Mdl. M-4, 3/8” Capacity; Angle Bending Rolls: BPR Mdl. CP20, 5”x5”x5/8” (Apprx)
Wyatt Metal Boiler Vertical Angle Roll; Tube Bender: Ercolina “Top-Bender” with PLC; Ironworker: 111 ton Buffalo #21/2 Mechanical; Bandsaws: 18" Marvel #81, 20” DoAll Mdl. TF2020A Automatic, 36” DoAll 3610-2 Vertical Bandsaw;
Welders: Over 15 Welders Including Miller Syncrowaves, Thermal Arc Fabstars, Lincoln Power Migs, Linde, Etc; Bridge
Cranes: (2) 5-Ton Single Girders, 4-Ton C&M’s , (2) 2-Ton – also 10 Ton & 5 Ton Spreader Beams; Air Compressor:
150HP Leroi Mdl. LS-20S-150H Screw Type; Forklifts: 10,000# Towmotor Mdl B-10; Front End Loader: Case W-9G;
Trucks & Tractor: 2006 International Mdl 4200VT365 20’ Stake Body, 1996 Freightliner Tractor; 1999 International Mdl.
4900DT466#; Aerial Manlift: Simon Mdl. MP40 Gas Powered; Flatbed Trailers: Up to 42’ Including 70,000# GVWR
www.bidspotter.com/forms/event.php?event=16035
Transcraft Stretch-Type and 48,000# Rogers 35’ Single Drop: Shot
Blast Booth: 45' L x 14' H x 17' 9" W Double Door
with Reclaim, Also Available: 16,000# Magliner Mobile Ramp, Springfield 16”x60” Lathe, Yard Trailers & Box Storage,
Magnetic Drills, Dust Collectors, Ridgid Pipe Threader, HD Steel Plate Table, Power Tools, etc – Hundreds of Lots; Scrap & Usable Material – Including Steel Plate, Channels, Stainless Steel, Aluminum Plate & Pipe, Assorted Scrap –
Most Usable Material have Certs!
Register To Bid Online At:
Buyer’s Premium Applies
For more information visit our website
www.kosterindustries.com
SALE PRESENTED BY:
40Daniel
DanielStreet
Street••Farmingdale,
Farmingdale,N.Y.
N.Y.11735
11735
40
farming division
Tel:631-454-1766
631-454-1766••Fax:
Fax:631-454-1779
631-454-1779
Tel:
email:[email protected]
[email protected]
email:
industrial division
13
•• ONLINE ONLY AUCTION ••
Surplus to
Equipment moved for convenience:
4243 US Route 23 South
Piketon, OH 45661
2 ND o
Mult f
i
Auct ple
ions
Date: Bidding Closes Tuesday, November 11th
Inspection: Monday, November 10th from 9:00 AM – 4:00 PM
POWER GENERATION & ELECTRICAL MACH’Y
•• HIGHLIGHTS: ALL NEW IN 2008 – NEVER INSTALLED ••
•(2) CAT SR48-GD 1230 kW/1535 kVA
Continuous Diesel Generator Sets
•CAT C27 725 kW/906 kVA Prime
Diesel Generator Set
•Fire Guard 1000 – 2000 Gallon
Above Ground Fuel Tanks
•Lg. Qty. Diesel Fuel Transfer Pumps,
Motors, Filters, Cartridges, and
more
•(500+/-) MKS Pressure Transducers &
Transmitters
•(16) GE 9T83C9874-Type QL General
Purpose Power Transformers
•CD Technologies UPS Battery
Chargers
•(10) Ass’t Flowserve Centrifugal
Pumps
•(8) WCR A891M Stainless Plate Heat
Exchangers
•1000s of ass’t Flowserve, Flowtek
& Crane Marwin actuator, butterfly,
globe and ball valves
•40,000+/- Feet Electrical Conduit &
Fittings
•1000+/- Copper Tubing & Fittings
•And Much More!
Huge Quantity Pipe Fittings including Ass’t Brass, Copper & Bronze Flanges, Covers, Ts,
Elbows, Nipples, Reducers, Check Valves, and More!
Can’t attend in person?
BID LIVE ONLINE AT:
14
TERMS: To be sold in accordance with CRG
Terms of Sale as published on Web and in
Auction Catalog. OH Lic # 2009000015
www.crgauction.com • (800) 300-6852
farming division
industrial division
200,000sq.
sq.ft.
ft.Fabricating
Fabricating &
& Machining
Machining Facility
200,000
Facility
Plant Closed
Closed
Plant
HOWDENNORTH
NORTH AMERICA,
AMERICA, INC.
HOWDEN
INC.
383 South
BroadwaySt.,
St.,New
New Philadelphia,
OhioOhio
4466344663
383 South
Broadway
Philadelphia,
Sale Date:
Tuesday, 21,
October
21, 2014
9:00 AM
Sale Date: Tuesday,
October
2014
at at9:00
AM
Inspection:
Monday,
fromAM
10:00toAM
to 4:00
Inspection: Monday,
October
20thOctober
from20th
10:00
4:00
PMPM
Fabricating,
Welding
& Shot BlastEsab
Equipment:
Esab
Fabricating, Welding
& Shot Blast
Equipment:
Avenger
1Avenger
1-14
CNC
Plasma
Burning
Table
w/12’x12’
14 CNC Plasma Burning Table w/12’x12’ Table, 12’ x ½” Cincinnati
Table, 12’ x ½” Cincinnati Model 500H Hyd. Power
Model 500H Hyd. Power
Squaring Shear, 400 Ton x 14’ Pacific
Squaring Shear, 400 Ton x 14’ Pacific Hyd. Press Brake,
Hyd. Press Brake, 10’
½”&&6’6’x ¼”
x ¼”
Bertsch
Pinch
Plate
10’ xx ½”
Bertsch
InitialInitial
Pinch Plate
Bending
Bending Rolls, Thomas
3 & Buffalo
½ Angle
Rolls,
Rolls,No.
Thomas
No. 3 &No.
Buffalo
No. ½Bending
Angle Bending
Buffalo No. 2-1/2 &Rolls,
Peddinghaus
Ironworkers,
144”
Buffalo No.Type
2-1/2210/6
& Peddinghaus
Type 210/6
Ironworkers,
144” Pangborn
Model
LR-1 Rotary
Table
Pangborn Model LR-1
Rotary Table
Shot Blast
Machine
w/Reclaim
Shot Blast Tub
Machine
DustWelders
Collector,
& Dust Collector, Vibratory
Partsw/Reclaim
Finisher, &(20)
&
Vibratory
Tub
Parts
Finisher,
(20)
Welders
&
Plasma
Plasma Cutters, (30) 60” x 60” Weldsdale Acorn Welding Tables,
(30) 60” x 60” Weldsdale Acorn Welding Tables,
Lg. Qty. WeldingCutters,
Tools,
Supplies & Related Equipment.
Lg. Qty. Welding Tools, Supplies & Related Equipment.
Machining, Toolroom,
Shop & Support Equipment: 80” Scheiss
Machining, Toolroom, Shop & Support Equipment: 80”
& 36” Bullard Vertical
Boring
4”Vertical
Portage
Horz.
Boring
Mill,
Scheiss
& 36”Mills,
Bullard
Boring
Mills,
4” Portage
20” x 78” & 24” x 96”
Monarch
Lathes,
3A24”&xNo.
W&S Turret
Horz.
Boring Mill,
20” x No.
78” &
96” 5
Monarch
Lathes,
Lathes, 25 Ton x 72”
Stroke
Horz.
Broach,
No. 3A
& No. 5Colonial
W&S Turret
Lathes,
25 Ton xToolroom
72” Stroke
Colonial
Broach,
Toolroom
Machinery
Machinery Including
Vert. Horz.
& Horz.
Mills,
Radial
Drills,Including
Lathes,
& Horz. Accessories,
Mills, Radial Drills,
Saws,Electrical
Grinders,
Saws, Grinders, Vert.
Machine
Lg.Lathes,
Qty.
Machine Inventory,
Accessories, Lg.
Qty. Booth
Electrical&Switchgear,
New
Switchgear, New Bearing
Paint
Sound Proof
Bearing Inventory, Paint Booth & Sound Proof Test Rooms,
Test Rooms, Lift Trucks
& Lg. Qty. Shop Equipment & Supplies.
Lift Trucks & Lg. Qty. Shop Equipment & Supplies.
Live on the Internet
via www.bidspotter.com
15% On-Site & 18% On-Line
Live on the
Buyers Premium
Internet
via: On-Line Buyers Premium
15% On-Site
& 18%
Jeffrey
L. Luggen
& Joseph/Luggen
/ Auctioneers
Jeffrey L. Luggen
& Joseph
Luggen
Auctioneers
farming division
industrial division
15
http://www.bidspotter.com/en-us/auction-catalogues?ClientId=834073aa-521a-474e-be3f-a2890129daac
https://www.facebook.com/pages/Infinity-Asset-Solutions-Inc/238299922871609
https://twitter.com/infinityassets
www.infinityassets.com
farming division
16
industrial division
MULTI DAY ONLINE AUCTION
INTERNET BIDDING ONLY
INDUSTRIAL SURPLUS OF CONNECTICUT, INC.
OCTOBER 21, 22 & 23 • 11:00 AM (ET)
INSPECTION: Monday, October 20th 9 AM to 5 PM or By Appointment Prior to
Surplus Equipment of Industrial Surplus of Connecticut, Inc., Huge Inventory
Including: Machine Tools, CNC Machining & Turning Machines, Gear Machinery, Heat Treat, Finishing, Woodworking, Tooling, Spare Parts, Vehicles,
Material Handling Equipment, Miscellaneous Plant Support, etc.
Berlin, Connecticut - USA
www.bidspotter.com/forms/clientupcoming.php?clientname=132
FEATURED ITEMS
• Machine Tools
• Lapping Machines
• Air Compressors
• CNC Machining Centers
• Heat Treat / Ovens
• CNC Turning Centers
• Grinding Equipment
• Inspection & Measuring Tools
• Finishing Equipment
• Automatic Chuckers
• Woodworking Machinery
• Threading Machines & Die
• Heads
• Automatic Screw Machines
• Vidmar & Lista Cabinets
• Gear Machinery
• Forklifts & Material Handling
• Trucks & Vehicles
• Tooling & Spare Parts
• Shop & Support Equipment
Powered by:
http://www.bidspotter.com/forms/event.php?event=19651
Buyer's Premium: 15%
REGISTRATION & BIDDING AT:
WWW.THOMASAUCTION.COM
Thomas Industries
Guilford, CT 06437
EMAIL: [email protected]
farming division
Auction License #AU481
Phone: 203-458-0709
"Worldwide Auctions & Appraisals Since 1947"
industrial division
17
Large Capacity CNC & Conventional Machining Facility
Plant Closed
TODD INDUSTRIES
7300 Northfield Road, Walton Hills, Ohio 44146
Sale Date: Tuesday, October 28th at 10:00 AM
Inspection: Monday, October 27th from 10:00 AM to 5:00 PM
Featuring: 38” x 243” Porbea & 42” x 270” Niles Heavy Duty
Lathes, 6” Lucas Horizontal Boring Mill w/54” x 98” Table,
4” Lucas Model 42B-60 Horizontal Boring Mill, 24” x 120”
Tarnow Toolroom Lathe, 20” x 72” HES & 16” x 60” Mighty
Turn Toolroom Lathes, (2) Fadal Model 8030 & 6030 CNC
Vertical Machining Centers, (5) 2HP Bridgeport Series 2
Vertical Milling Machines, Misc. Toolroom Machinery, Saws,
Surface & Tool Grinders, Welders, Air Compressors, Lift
Trucks, Machine Accessories, 6” x 6” x ½” Peddinghaus
Ironworker, Shop Equipment & (3) 5’ x 10’ Acorn Tables.
Live on the
Internet via:
Cincinnati Industrial Auctioneers, Inc.
www.cia-auction.com
513-241-9701
farming division
18
industrial division
ONLINE AUCTION
ncredible Offering
CNC LASERS
Trumpf, Bystronic, Amada, Mazak & More!
REGISTER NOW AT:
BIDDING ENDS:
Thursday, OCTOBER 30
at 3:00PM EST
contact prestige equipment For more inFo:
farming division
industrial division
19
farming division
20
industrial division
ONSITE & LIVE WEBCAST AUCTION
VICTORY REFRIGERATION
110 Woodcrest Road • Cherry Hill • New Jersey
SALE DATE:
Thursday, November 13th • 10:30 A.M.
Inspection: Wednesday, November 12th
8:00 A.M. to 4:00 P.M. and morning of sale
FEATURING:
•AMADA LIBRA 206
HIGH SPEED CNC PUNCHING CELL
•CNC TURRET PUNCHES
•CNC PRESS BRAKES
•PRESSES
•SHEARS
•TOOLROOM
•FORKLIFT TRUCKS
•AIR COMPRESSORS
•MOLDS & FIXTURES FOR ASSORTED
REFRIGERATION PANELS
•FOAM UNITS
•AND MORE!
www.bidspotter.com/forms/event.php?event=16035
Register To Bid Online At:
Buyer’s Premium Applies
For more information visit our website
40 Daniel Street • Farmingdale, N.Y. 11735
farming division
Tel: 631-454-1766 • Fax: 631-454-1779
email: [email protected]
industrial division
21
CORPORATION
75 YEAR OLD
MACHINE TOOL DEALER
(2) AUCTION DAYS | (2) LOCATIONS
Inspection: Day prior to auction from 9AM - 4PM
ALSO SELLING DIESEL POWERED
GENERATOR PLANT consisting of
(6) Worthington Turbo Charged Engines &
(6) Electric Machinery Generators
Buyer's Premium: 15% Onsite, 18% Online
TUESDAY, NOVEMBER 4th at 10AM
BROOKLYN, NY
WILKES-BARRE, PA
WEDNESDAY, NOVEMBER 5th at 10AM
CNC Machining Centers • (7) CNC Lathes & Chuckers • (3) Vertical
Turret Lathes • (9) Gap Bed Engine Lathes • Gear Equipment • Presses •
(12) Assorted Grinders • Chamfering Machine • Cold Saw • Tube Benders
• Pipe Cutters • Mills • Drills • Saws • Shears • Finger Brakes • STRIPPIT
Fabricators • EDMs • Electron Beam Welders • Dust Collectors • Tooling •
Inspection • Air Compressors • Forklifts to 18,000-lb. • Material Handling
farming division
Numerous VULCAN Incinerators & Rotary Kilns...some unused / never
installed (prints available) • Several VULCAN Briquette Presses •
Crushers • Pulverizers • Hammer Mills • Tank Turning Rolls • Dry Rod
Ovens • MORTON Keyseater 48" x 48" Table • Universal Mills • Rotary
Tables • Assorted Toolroom Equipment • Machining Tooling • HYSTER
20,000-lb. Capacity Forklift • 500-HP Blowers • Electrical • Raw Materials:
Ferrous, Non-Ferrous, Inconel, Stainless
HUGE SCRAP OPPORTUNITY
PA Auction Lic. #: Myron C. Bowling - AU003150R • Myron Bowling Auctioneers, Inc. - AY000090L • NYC -Alex Lyon Auction Lic.. #0862589
513/738-3311 | www.myronbowling.com
industrial division
22
S & S MACHINERY
PUBLIC AUCTION
Surplus Equipment From a
MAJOR COLD HEADING FACILITY
34846 Goddard Road, Romulus, Michigan 48174
SALE DATE: THURSDAY, NOVEMBER 6th at 11:00 AM
Inspection: Day Prior from 10:00 AM to 4:00 PM
Featuring: ¾” National No. 750 6-Die Cold Former w/Universal
Transfer, PKO (Rebuilt 2001, Less than 500 Hours, Located
Offsite), (3) 5/8” & (1) ½” National S2 Cold Nut Formers, (7) Fastener
Engineering PF-4000 Wire Uncoilers, (3) Kent Stoeverizer Auto
Crimping Systems, (15) Nutap MAS-20 & MAS-14 Nut Tappers,
(5) Tumbling Drum Washers to 24” Diameter & 10’ Long, Louis
Small Hydraulic Hobbing Press, Parts Conveyors, Hydraulic Wire
Cutters, Tooling, Parts & Accessories for Nut Formers & Tappers,
(5) Lift Trucks to 10,000 lb. Cap, ¼” x 10’ Cincinnati Squaring
Shear, Hand Brake, Welders, Band Saws, (3) Engine Lathes to
15” x 40”, (2) Bridgeport Milling Machines, Parker Majestic ID
Grinder, Landis OD Grinder, Surface, Pedestal & Tool Grinders,
Band Saws, H-Frame Presses, Floor Drills, Optical Comparators,
Tooling & Accessories.
Live on the
Internet via:
farming division
Cincinnati Industrial Auctioneers, Inc.
www.cia-auction.com
513-241-9701
industrial division
23
GOLDSTAR
THE
MACHINE TOOLS INC.
Aerospace Precision CNC Machining Facility
159 Wilkinson Road, Brampton (Toronto), Ontario Canada
5 AXIS
2011
Large Truck Box &
Trailer Manufacturer
430, rue Cantin Victoriaville (Quebec), Canada
2008
Air Blow Mist Tooling
AMADA EMK3610NT CNC Turret Punch
OVER $1M STORES INVENTORY
HUGE QUANTITY RAW MATERIAL • 2,000+ LOTS
460 Ton x 20'
HAAS VF-3, CNC VERTICAL MACHINING CENTER
2010
ONLY 1,087 HRS
2008
AMADA PROMECAM Press Brake
2001
HAAS ST20 CNC LATHE
CYBLEC CNC
10' x ½" 2010
Twin Spindle
ONLY 2239 HRS
HACO HSLX 3013, Hydraulic Shear
HAAS SL-30T CNC LATHE
HAAS VF-3 CNC VERTICAL MACHINING CENTER
Auction: Wednesday October 22, 11:00 AM
Inspection: Tuesday October 21, 9 AM to 4 PM
Live Onsite
(ET) Bid
& Online Via
NAKAMURA-TOME SC300 CNC Lathe
DAY 1: Wednesday Oct 29, 10:00 AM (ET)
(Machine Tools & Production Equipment)
DAY 2: Thursday Oct 30, 10:00 AM (ET)
(Stores Inventory, Raw Material, Rolling Stock & Vehicles)
Inspection: Tuesday October 28, 9 AM to 4 PM Bid Live Onsite & Online Via
A U C T I O N S • L I Q U I D AT I O N S
FINANCING • APPRAISALS
905.669.8893
infinityassets.com
Like us at: facebook.com/
Infinity-Asset-Solutions-Inc
farming division
Follow us at: twitter.com/
InfinityAssets
24
industrial division
HUGE INTERNET ONLY AUCTION
MACHINE TOOLS, FAB, PRESSES, GRINDERS, ROBOTS,
WELDING, Q.C., INDUCT. HARDENING,
FINISHING, PAINTING
WEDNESDAY, OCTOBER 21 • 11:00 A.M.
Bidding ends THURS., OCT. 23 • 10 A.M.
TEUTECH INDUSTRIES & TEUTECH LLC
6 Locations • Canada & U.S.A. • See Brochure
Bid on-site or bid via
PRESSES: LVD 300 T Str. Side Hyd. Drawing • (2) Bliss Str. Side up to 250 T • Bliss High Speed 200 T • OBI’s to 75 T • Cajormi
C-Frame, 2006
PRESS FEEDERS • STRAIGHTENER • UNCOILERS
CNC TURRET PRESSES: Strippit 1250H/30, 2000 • Strippit Cap-1000
MECH. SHEAR: 6’ X 3/8”
(2) HYDRO MECH. PRESSBRAKES
(4) SAWS: Imet Velox 350AF-E, 2002 • (2) Elumatec KS101/30 V Notch
CNC MACHINE TOOLS: Mazak VTC-20-C VMC • Mazak VQ20/408 4-Axis VMC • Mazak AJV-18-N VMC • (2) Daewood AceV35 Twin Pallet • Hurco BMC-20 VMC • Yang Eagle SML-12 L Gang Type Turning Center
CARBIDE TURNING TOOLS • CARBIDE INSERTS TOOLHOLDERS • (2) VERT. TURRET MILLS: Tos Finesa 11.5” x 49” •
Beaverpal 10” x 44”
BARFEEDER: LNS Quickload Servo S2
DRILLS • TAPPING • STAKER • GRINDERS: Koyo KVD-300W vert.disc • Gardner SDG30 dbl. disc • Cincinnati #2OM centerless • Sunnen CK-121-D • Shigiya GPA 40-60 & Cincinnati 10”x96” plain cyl. • (2) Hyd. Surface type • More!
MAT’L HANDLING ROBOTS: (2) ABB 2400-M200 rebuilt 2013 • Nachi
VACUUM IMPREG. SYS.: Locktite 24” d. X 60” ht. pressure vessel
VERT. INJECTION MOLDER: Newbury No. 30 Mdl. V5-30ARS
WELDERS: Spot Welders up to 75 KVA • MIG, TIG & Stud welders
(3) INDUCTION HARDENING SYS: NDK, Tocco & Pillar up to 159 KVA
SHOP & WAREHOUSE: Pallet Rack • Riveters • Water Conditioning
Q.C.: 30” Comparators • Sheffield Cordax CMM • Law NDT Crack Tester
FINISHING EQUIP.: Incl. Empire TT-20S Auto. Blast Finishing System • Vibe Tech, Rosemount & Mecca Deburrers • Burr King Belt
Sander • More!
PAINT SYSTEM EQUIP.: Broco 3-Stage Power Spray Wash & Oven • Nordson Powder Spray Booth • AZ0 Sifter • Fanuc Paint
Robot • More!
DON’T MISS THIS SALE!!!
BUYER’S PREMIUM: 8% webcast
INSPECTION: Tuesday & Wednesday, Oct. 21 & 22 from 9 am. to 4 pm or by appointment
AUCTIONEER: Ron Moore PA Lic. #AU005068
PAYMENT TERMS: Cash, Cashiers Check, Wire Transfer OR Company Check with letter from bank guaranteeing payment to PMI.
farming division
industrial division
25
HUGE 4-DAY AUCTION
ENORMOUS ALUMINUM SMELTING FACILITY
Ormet Corp • November 4, 5, 6, & 7 • Hannibal, OH
(10) Football field size aluminum
production buildings with over
(1000) 32,000 ton steel melting pots
Aluminum cast houses for sows and
billets, with multiple casting lines
and automated billet saws
(4) Facility maintenance shops packed full of machine
tools, fabricating equipment, welders & cranes
Massive electrical transformer &
rectifier yard feeding over 15 million
pounds of aluminum buss to pots
Jaw crushers, cone crushers, ball
mills, dust collectors, plus 1000’s of
feet of rabbit ear belt conveyor
Heavy mobile equipment fleet with
Grove cranes, Komatsu excavators,
Caterpillar loaders & skid steers
Over (50) Yale, Hyster & Caterpillar
forklifts from 8000 lb to 25,000 lb
capacities, many with bin turners
(100) Unit fleet of tractor tugs, E-Z
Go golf carts, Taylor Dunn electric
personnel and utility carriers
Complete QC lab bldg with carbon
test labs, x-ray core samplers, lab
size pulverizers & much more
$10 million cost new spare
parts & supplies inventory;
Plus a huge assortment of
motors and drives
BID ONLINE AT
in association with Capital Recovery Group
& PPL Auction Group
26
Contact us for more information...
415.522.5700
rabin.com
farming division
industrial division
As Appointed By The Trustee In Bankruptcy
Lakehead Marine & Industrial Inc.
Complete Shipyard Featuring Large Capacity Turning, Boring & Bending
401 Shipyard Road, Thunder Bay, Ontario, Canada
1 of 2 VBM’s
Swing 196.8"
Max 70.8" x 472.4"
1 of 13 Lathes
SCHIESS Vertical Boring Mill Model 2K 300/500
GEMINIS Engine Lathe Model GE-1400-S
6" Spindle
18' x 750 Ton
1 of 2 Boring Mills
ASQUITH 6" Floor Type Horizontal Boring Mill
PACIFIC Press Brake Model 750-18
Auction: Wednesday November 12, 10:00 AM (ET)
Bid Live Onsite
& Online Via
http://www.bidspotter.com/en-us/auction-catalogues/infinity-asset-solutions/catalogue-id-bscinf10113
Inspection: Tuesday November
11, 9 AM to 4 PM (Over 1,000 Lots!)
www.infinityassets.com
infinityassets.com 905.669.8893
farming division
www.hilcoind.com
www.hilcoind.com
AUCTIONS • LIQUIDATIONS • FINANCING • APPRAISALS
industrial division
27
AUCTIONS
Click Here
to Visit the
http://www.industrialmachinetrader.com/calendar/AuctionsCalendar.cfm?calendar_type=AU
Auction Calendar
28

WWW.COMLY.COM - MyEquipAuctions.com

Transcription

Similar documents

CIMCO DNC-Max Brochure

CENTROIDTM - Centroid CNC

PUBLIC AUCTION - Industrial Auctioneers Association

(CNC) Machining and Tool Path Programming

IMT MEA_06272016 - MyEquipAuctions.com

Capabilities - Reyes Machining

IMT MEA_04092015 - MyEquipAuctions.com

southern structures, llc

Asset Sales, Inc. FIVE STAR AIRPORT ALLIANCE, INC.