оборудване за бензиновози

Transcription

Str. Nicolae Teclu nr.5 , cam.3-7, Sector 3 , 032368 București
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
email: [email protected], www.dais-ro.com
2 / 77
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
3 / 77
TABLE OF CONTENTS
I.
TANK TRUCK EQUIPMENT ............................................................... 5
1.1.
1.2.
1.3.
1.4.
1.5.
1.6.
1.7.
1.8.
1.9.
1.10.
1.11.
1.12.
1.13.
1.14.
TRAILERS, SEMITRAILERS and RIGIT TANKS for fuels ............................. 6
Manhole covers .................................................................................. 7
Pneumatic control units ....................................................................... 9
Adapters and fittings for Bottom loading .............................................. 10
Super light ball valves ....................................................................... 12
Foot valves ...................................................................................... 12
Nozzles and parts ............................................................................. 14
Vapour recovery adapters and valves .................................................. 16
Overfill protection system LIBERTY ..................................................... 18
Compensators, sight flow, DDC .......................................................... 19
SAFETY AND CONTROL SYSTEM SCS ................................................... 21
HOSES ............................................................................................ 22
Hose reels........................................................................................ 24
Pumps and filters .............................................................................. 25
1.15.
1.16.
1.17.
Flowmeters and accesoires................................................................. 32
Manifolds ......................................................................................... 37
Grounding reels ................................................................................ 37
1.14.1.
1.14.2.
1.14.3.
1.14.4.
1.14.5.
1.14.6.
Spare parts for BLACKMER TXD2A ............................................................. 26
Spare parts for BLACKMER TXD2.5A .......................................................... 27
Spare parts for BLACKMER TX3 .................................................................28
Spare parts for BLACKMER TX4 .................................................................29
Spare parts for BLACKMER TXH3C ............................................................. 30
SPARE PARTS FOR ALFONS HAAR PUMPS ...................................................31
II. TANKS FOR LPG ............................................................................ 38
2.1.
2.2.
2.3.
2.4.
New tanks from MACOLA ................................................................... 38
Hoses for LPG................................................................................... 39
Hose ends, nozzles for LPG ................................................................ 40
Level gauge for LPG – REGO ROTOGAGES® .......................................... 43
2.5.
2.6.
2.7.
2.8.
2.9.
2.10.
Safety valves REGO .......................................................................... 44
Ball valves for LPG ............................................................................ 45
Sight flo indicators, manometers for LPG ............................................. 45
Internal foot valves for LPG and NH3 ................................................... 47
Spare parts, tools ............................................................................. 48
Flowmeters for LPG ........................................................................... 49
2.11.
Pumps and spare parts for LPG ........................................................... 51
2.12.
2.13.
2.14.
Compensators .................................................................................. 56
Other equipment for LPG ................................................................... 56
Compressors and spare parts for LPG .................................................. 56
2.4.1.
2.4.2.
1” Rotogages® for Large Mobile Containers .................................................43
¾” Rotogages® for Small Mobile Containers ................................................43
2.10.1.
2.10.2.
Metering systems ....................................................................................49
Spare parts for LC MA7 ............................................................................50
2.11.1.
2.11.2.
2.11.3.
2.11.4.
2.11.5.
2.11.6.
Pumps ...................................................................................................51
Spare parts for BLACKMER LGLD2E , LGLD3F ..............................................52
Spare parts for BLACKMER – LGL 1.25/ LGL 1.5 ..........................................53
Spare parts for BLACKMER LGLD4B ........................................................... 54
Spare parts for BLACKMER TLGLF3C .......................................................... 55
PUMP ALFONS HAAR GFPSC 80 912 D4 ...................................................... 56
2.14.1.
BLACKMER LB161....................................................................................57
III.TANK TRUCKS FOR BITUMEN ........................................................ 58
IV. FOOD TANK TRUCKS ..................................................................... 59
4.1.
4.2.
ETA tank trucks for milk, wine and water ............................................. 59
Equipment for food tank trucks........................................................... 59
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
4 / 77
V. CHEMICAL TANK TRUCKS .............................................................. 61
5.1.
5.2.
5.3.
5.4.
5.5.
5.6.
5.7.
5.8.
5.9.
Chemical hoses................................................................................. 61
Ball valves and butterfly valves........................................................... 62
Fittings ............................................................................................ 62
Dry dicconnect couplings ................................................................... 63
Flowmeters ...................................................................................... 63
Compensators .................................................................................. 63
Pumps and compressors .................................................................... 64
Other equipment............................................................................... 64
Seals for manhose covers .................................................................. 64
VI. BULK TANK TRUCKS ...................................................................... 65
6.1.
6.2.
6.3.
6.4.
6.4.1.
6.4.2.
Trailers, semitrailers ARDOR .............................................................. 65
Fittings, valves, manometers .............................................................. 65
COMPRESSORS................................................................................. 65
Hoses .............................................................................................. 66
Hoses for abrasive media ......................................................................... 66
Hoses for hot air ..................................................................................... 67
VII.
COUPLINGS ............................................................................. 68
VIII.
PIPES, ELBOWS, FLANGES ....................................................... 71
7.1.
7.2.
7.3.
7.4.
7.5.
7.6.
8.1.
8.2.
KAMLOK .......................................................................................... 68
TW .................................................................................................. 68
GUILLEMINE ..................................................................................... 69
Safety clamps................................................................................... 70
Reductions ....................................................................................... 70
Other fittings .................................................................................... 70
Flanges ............................................................................................ 71
Pipes, elbows, reductions ................................................................... 72
IX. ADR SAFETY SIGNS FOR VEHILES ................................................. 73
9.1.
9.2.
9.3.
9.4.
9.5.
9.6.
9.7.
Standard and folding embossed panels ................................................ 73
Identifying marks for vehicles ............................................................. 74
Extinguisher holders .......................................................................... 74
Articles for ADR ................................................................................ 74
Signals in conformity of ADR regulations .............................................. 75
Rear reflecting and fluorescent trailer panels acc.ECE 70 ....................... 76
Conspicuity stripes in conformity with ECE 104 ..................................... 76
X. OTHER EQUIPMENT FROM DAIS .................................................... 77
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
I.
TANK TRUCK EQUIPMENT
TANK SYSTEMS from A to Z
5 / 77
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
6 / 77
1.1. TRAILERS, SEMITRAILERS and RIGIT TANKS for fuels
Dais is a official distributor of truck body builders, a trailer and semi-trailer manufacturer.Satisfied
customers using our vehicles are the proof hereof. Many years of experience and a high innovation ability
are the basis to offer tailor-made designed transport solutions to our customers. Our carefully selected,
world-wide recognized system suppliers, too are combined in our extensive quality management system.
Certification according to DIN EN ISO 9001:2000 guarantees a high quality level of ROHR vehicles for
commercial use also in future. Economic efficiency as well as safety for human beings and the
environment is our main precept; the highest possible customer satisfaction always our main target.
Road Tankers Semi-trailer type offer a maximum pay-load
ROHR produces semi-trailers for mineral oil supply to petrol stations with a tank capacity of up to 50.000
l. Tanks are shaped either in the well-known cylindrical/round and box-type shape or, and this in new, in
a cylindrical/elliptical shape. The weight-optimized ROHR-design is well developed, tried and tested and
offers an empty weight reduction of 10 % and a vehicle length of less 1 m compared to conventional
designs. A low high-centre of gravity point and a tipping-over safety device, build-in in series, ensure a
safe and excellent road performance, even in fringe range conditions. More pay-load due to the reduced
empty-weight for lower logistic costs and positive economic side effects.
SEME-TRAILERS:
RIGIT TANKS and TRAILERS:
For JET A1:
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
7 / 77
1.2. Manhole covers
Aluminum super lite manhole covers from OPW/CIVACON
Technical
Material
Seals
Temperature
Max air flow
Weight
Standarts
Aluminum alloy 5764
Acryl-nitril or Viton
-20ºC to +70ºC
3
7000m /h at 0.35bar
9.5 kg
EN13314, EN13317, ADR 6.7
(CW) T400-249217GJ – 20”
(58D) T400-240017GJ – 20”
Size
10” PAF
With locking system
Hose for overfill sensor
Hole for P/V valve w/ flamearrester
Security facility for padlock, wire or plastic seal
Automatic sealing of the P/V vent in a roll over situation
Secure 24-bolt fixing as required by ADR
Manhole covers
T400-249217GJ (CW)
T400-240017GJ (58D)
Т400-PFC01A
20” alum
20” alum, type 58D
PAF 10” with lock
ACCESOIRES
58-41-84
6835
NV3000E
LC01013
12022
11728
11730
11732
11740
51-30-32
58-00-28
20" WELD RING ALU, 5.3 MM
20" WELD RING Steel
High-flow P/V vent, EN14595
Dip tube assy, 2m
O-ring 10” for PAF, pos.9
Spring, pos.7
Latch Roller, pos.15
Roller Pin, pos.16
O-Ring for PAF, Viton, pos11
Seal 20” for manlid
Plug 1 ¼” for 58-00-28D
Other seals for manhole covers
Part #
VD-250/270/8-NBR
VD-310/330/11-NBR
VD-284/340/8-NBR
VD-305/335/10-EP
VD-505/535/15-EP
VD-305/335/10-VI
VD-505/535/15-VI
Name
From NBR
From NBR
From NBR
From EPDM
From EPDM
From Viton
From Viton
d
250
310
284
305
505
305
505
Dais made manhole seal at customer request.
D
270
330
340
335
535
335
535
S
8
11
8
10
15
10
15
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
8 / 77
Aluminum manhole covers Alfons Haar DO 530/300/2A/DD
Manhole cover with emergency pressure relief valve. Part #1361011.
Nominal pressure : 0 bar
Design temperature : 50°C
Opening pressure of emergency pressure relief valve : 0,35 bar
Pressure loss at flow rate of 2400 l/min and lift-off 10 mm : 0,4 bar
Weight : approx. 10 kg
NBR seals
Pos
01
02
03
04
12
13
14
15
16
17
24
25
26
27
28
29
30
31
32
33
35
36
Qty
1
1
1
1
2
24
2
4
4
1
6
6
6
1
1
1
8
2
6
14
14
4
Part #
AH-1283754
AH-1678279
AH-1283576
AH-1283568
AH-1283282
AH-1094838
AH-1054267
AH-1283673
AH-1283614
AH-1283266
AH-1080500
AH-1080810
AH-1131679
AH-1283258
AH-1327913
AH-1328391
AH-1283681
AH-1283690
AH-1080586
AH-1023710
AH-1076899
AH-1284130
Name
BASE PLATE 2A
COVER WITH SAFETY VALVE ASSEMBLY
ARM
PRESET LEVER
BOLT
WASHER 10,5 -ST GALZN DIN 125
CLAMPING SLEEVE 3 X16-1.4310 DIN
HEX. SCREW M10X30-8.8-A2E DIN933-A.SHORT,DIN76
HEXAGON NUT M 10-8-A2E DIN 985
PRESS.SPRING 4 X45 X 70 C=0
PRESET HOOK
HEX. SCREW M10X90-8.8-A2E DIN 933
LOCK NUT M10 205-PA
GASKET PD 556
SEAL RING, MAN HOLE COVER
CLIP S 333/12 SZ W1
BOLT FOR CLIP
HEXAGON NUT M 10-8-A2E DIN 934
SPRING WASHER A 10-A2E DIN 1
HEX. SCREW M 10X70-8.8-A2E DIN 933-A.SHORT,DIN76
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
9 / 77
1.3. Pneumatic control units
Pneumatic control Units SENING
Part #
S-STB
Name
Pneumatic control unit for one compartment. К, 1,2,3,4,5
S-STB-A
Pneumatic control unit for one compartment. К, 1,2,3,4,5
Price
Pneumatic control units Alfons Haar
AH-1005070
AH-1009610
AH-1061050
AH-1009636
AH-1019607
AH-1019615
AH-1140040
Control Block PST 2A, black. Needs PE-L / PE-R or PWEL / PWER
Main Control Block PST 3A, green. eeds PE-L / PE-R или PWEL / PWER
End black, left. PE-L
End block, right. PE-R
End block, left w/ elbow. PWEL
End block, right w/ elbow. PWER
Pneumatic controlunit w/o indication PSTRO
Spare parts for pneumatic control unit Alfons Haar
Pos
1
2
3
4 – BLACK
4 – GREEN
4 – RED
5
6
7
8
9
Part #
AH-1061034
AH-1061042
AH-1041360
AH-1059099
AH-1059102
AH-1059110
AH-1040983
AH-1041076
AH-1020117
AH-1041203
AH-1020001
Name
top assy. compl.
piston compl.
clamp
knob compl. black
knob compl. Green
knob compl. Red
plate choice “1”,”2”....”8”
clamping ring
o-ring
connector
o-ring
Price
За допълнителни схеми, моля потърсете ни на офисните телефони.
Pneumatic remote and emergency release PFN 1A
PFN 1A
Rigit design for foot or meter cabinet door
activation.
Color: black
Working pressure: to 8 bar
Weight: 0,350 kg
connection: hose 6 х 1
Pneumatic remote and emergency release PFN-1B
Rigit design for foot or meter cabinet door activation.
Part #
AH-1155101
PFN-1BA
Price
Part #
AH-1005088
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
10 / 77
Pneumatic accessories
Photo
Part #
PN-PA12
Name
Hose PA 12, 6 х 1, black
Price
PN-T100
Water capture, pressure regulator and oil lubricant на
резба G ¼”
PN-6560
Mini ball valve, first end - ¼” male thread, second end
– for hose 6 x 1
Mini ball valve, both ends – for hose 6 x 1
PN-50020
Connector, G ¼”; for hose 6 x 1
PN-REG16
Fastener
PN-M0101
Manometer, axial, to 12 bar, G 1/8”, plastic
PN-55040
Connector straight, plasric, both ends – hose 6x1
PN-50040
Connector straight, metal, both ends – hose 6x1
PN-55130
PN-50150
PN-55230
PN-50230
PN-55310
Connector 90° elbow, plasric, both ends – hose 6x1
Connector 90° elbow, metal, both ends – hose 6x1
Connector T-type, plasric, both ends – hose 6x1
Connector T-type, metal, both ends – hose 6x1
Connector Y-type, plasric, both ends – hose 6x1
PN-50310
Connector Y-type, metal, both ends – hose 6x1
PN-7000SC-1/8
Silencer on 1/8” male thread
PN-7000SC-1/4
Silencer on ¼” male thread
PN-6570
PN-55115-1/4
PN-55115-1/8
Connector 90° elbow, plasric, first end - ¼” male
thread, second end – for hose 6 x 1
Connector 90° elbow, plasric, first end – 1/8” male
thread, second end – for hose 6 x 1
PN-8610
Plug for connector
CIV3AIR
Pneumatic group kit. PN-T100, PN-6570, PN-50020,
PN-REG16, PN-M0101
1.4. Adapters and fittings for Bottom loading
876-A
871-EDB
ELBOW
876-AL40
876-AL4030
H71271
871EDB-AL40
H08347M
60TT
60TTF
60TT-A
H20583M
H04137M
4” API x 4” Kamlok adapter, alum.
4” API x 3” Kamlok adapter, alum.
BUNA-A sels for 876-AL40, 876AL4030, 875-AL40
4” API x 4” BSP, w/ lever, alum.
BUNA-A seal for 871EDB-AL40
Elbow top seal x 4”KAMLOK
Elbow top seal x 4”NPT thread
Elbow top seal x 4”KAMLOK
Sight glass for 60TT
BUNA-A seal for 60TT
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
11 / 77
API adapters OPW / CIVACON
891BA
891NB
- W/ sight glass
- Aluminum lever
- Two piece
- w/o lever
- two piece
- w/ sight glass
875-AL40
lightweight, corr. resistant, up
to 3bar, w/ locking lever
Spare parts and accesoires for API adapters
Part #
861HRK-ALUM
861ORK
891HRK
891BRK
891ORK
891SRK
FD-174
11240
11456
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
11548
11905 2
11550
10806M
11534
H20051M
11850
11545
11544
11543 1,4
11661
11662
11618
11365M 3
H51437M 3
H51384M 3
11366M 3
11705 1,2,4
11536 1,4
10840 1,4
H06924M 1,2,4
H20182M 1,4
11490 1,4
H20199M 1,4
11460 1
H08901M 1,4
11623 1,4
11664
11665
11703
11704 1,4
H20057M 3
H20058M 2
12080
Name
Handle repair kit for API 861, 897BAL & 897NB
O-ring Repair Kit for API 861BA, 897BAL & 897NB
Handle Repair Kit for API 891BA & 891NB, 1)
Sight Glass Repair Kit for API 861, 891BA & 891NB, 3) (replaces 861BRK)
O-Ring Repair Kit for API 891BA and 891NB, 2)
Shaft Repair Kit API 891BA and 891NB, 4)
4”TTMA seal
SIGHT GLASS, 4” TTMA
SIGHT GLASS, 4” TTMA FOR ETHANOL
Body Machined
O-Ring
Adaptor Face
Lock Washer
Screw
Stop Pin
Poppet
Link Poppet/Handle
Link, Shaft
Shaft
E-Clip
E-Clip
Clevis Pin
Sight Glass
O-Ring
Float Ball
Screw
Quad Ring
Bearing
Nylon Washer
O-Ring
Spring
Hub
Nylon Washer
Handle
Fulcrum Pin
Bowtie Clip
Spring
Bearing
Retaining Ring
Washer
Lock Washer
O-Ring
Plug, 3/8” NPT
1
1
1
6
6
1
1
1
1
1
1
1
3
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1-included in 891HRK, 2- included in 891ORK, 3- included in 891BRK, 4- included in 891SRK
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
12 / 77
1.5. Super light ball valves
Full Flow Ball Valves and 2-way Ball Valves are specially designed for handling different types of fuels such as
diesel, gasoline, Jet fuel etc. In Tank trucks. Mann Tek Ball Valves in Aluminum offer weight saving benefits to the road
tanker industry and they are also used in different types of fixed plant and mobile fuelling applications.
All sizes of Mann Tek Ball Valves and 2-way Valves are available with pneumatic actuation in either single or double
acting form.
Suitable for tank trucks, transport of solvents, JET, paints, etc.
TECHNICAL CHARACTERISTICS:
Working pressure: 10 bar.
Test pressure: 15 bar
Burst pressure: 50 bar
Materials:
Body: aluminum
Flanges: Alum, steel
Internal parts: ALU, SS
Seals: VITON, TEFLON
Size/sphera: DN50/45, DN80/70, DN100/98
Part #
FFBV-S50-RR-V
FFBV-S50-MM-V
FFBV-S50-TT-V
FFBV-S50-TT-V-A
FFBV-S80-RR-V
FFBV-S80-TT-V
FFBV-S80-TT-V-A
FFBV-T80-TT-V-A
Selection:
1
2
FFBVA
3
80-
4
F
5
F-
6
V
1. Name: FFBV
2. Orientation: S – globe, A – angle, T – T-type
3. Size: 50, 80, 100
4., 5. Connection: F - flange PN 10/16, M – Male thread, F – Female
thread, T – TW flange, W – for welding, R – wafer type
6. Seals: V – Viton, T – PTFE
7. Actuator /Option/: A
Name
Super light ball valve, globe, DN50, wafer type, Viton
Super light ball valve, globe, DN50, male BSP threaded, Viton
Super light ball valve, globe, DN50, Flange TW, Viton
Super light ball valve, globe, DN50, flange TW, Viton, w/ pneumatic actuator
Super light ball valve, globe, DN80, wafer type, Viton
Super light ball valve, globe, DN80, flange TW, Viton
Super light ball valve, globe, DN80, flange TW, Viton, w/ pneumatic actuator
Super light ball valve,T-type, DN80, flange TW, Viton, w/ pneumatic actuator
Price
1.6. Foot valves
OPW / CIVACON’s
EURO100-Line Bottom
Valves are designed for
increased safety, durability and service performance.
The EURO100-Line high fl ow bottom valves are
available as Compact 100-1 series, Super Compact 1002 series and 4” TTMA or TW 100-3 series.
COMPACT, square flange 140х140
EURO100-1-AL40
EURO100-1S-AL40
EURO100-1B-AL40
4”, non-pressure balanced
4”, non-pressure balanced sequential operation
4", pressure balanced
EURO100-2-AL40
EURO100-2S-AL40
EURO100-2B-AL40
4”, non-pressure balanced
4”, non-pressure balanced sequential operation
4", pressure balanced
SUPER COMPACT MODEL, square flange 140х140
COMPACT, flange 4”TTMA
EURO100-3S-AL40
4” non-pressure balanced, sequenced
ACCESSOIRES
10-01-74/EU
FD-174
FD-220/162
SF644-ST40
EURO100RK
Squar flange, alum 140X140
Gasket for flange TW3, 4” TTMA 4”
Gasket for sump flange
4'' SUMP FLANGE + GASKET FOR 21-00-00
Seal kit for EURO100-series Bottom Valve
For more flanges see chapter PIPE and FLANGES.
Size:DN100 /4”/
Working pressure: 500kPa /5 bar/
Burst pressure: 2500kPa /25bar/
Self-closing piston-type operation
Max flow: 2500 lt/min
Hard anodized and stainless steel internals
Seals: GFLT Viton
Working temperature:-20ºC to +70ºC
Weight EURO 100-1:4.2 kg
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
13 / 77
Foot valves SENING BO100
S-BO100
S-BO100-ENV
S-BO100-RK
Foot valve BO100
Safety valve for BO100
Repaire kit for SENING BO100
Foot valves Alfons Haar
Part #
Name
Price
AH-2132646
PBVL-100100-S-FL90-15P
AH-2166414
PBVL-100100-U-FL90-P
AH-2165434
PBVO-100100-S-FL90-15P
AH-2165245
PBVO-100100-U-FL90-P
AH-2161689
PBVL-100100-S-FLT-15P
AH-2161815
PBVL-100100-U-FLT-P
PBVH – Pneumatic foot valve, elbow design, unloading height 115 mm,
pressure-balanced, with viton seals, for low-viscosity and viscous mineral oil
products and non-corrosive and / or suspension-free liquids,
AH-1299316
PBVH-100100-FL90
AH-1326070
PBVH-100100-FL90-15
AH-1648590
PBVH-10080-FL90
AH-1325376
PBVH-100100-FL90MN
AH-1326089
PBVH-100100-FL90-15MN
AH-1648604
PBVH-10080-FL90-MN
AH-1665258
PBVH-100100-FL90-15MA
PBVJ – Pneumatic foot valve, elbow design, unloading height 65 mm, pressurebalanced, with viton seals, for low-viscosity and viscous mineral oil products
and non-corrosive and / or suspension-free liquids.
AH-1300268
PBVJ-100100-FL90
AH-1327255
PBVJ-100100-FL90-15
AH-1327239
PBVJ-100100-FL90-MN
AH-1327263
PBVJ-100100-FL90-15MN
AH-1608025
PBVJ-100100-FL90-G5MN
AH-1665266
PBVJ-100100-FL90-15MA
PBVK – Pneumatic foot valve, elbow design, unloading height 23 mm,
pressure-balanced, with viton seals, for low-viscosity and viscous mineral oil
products and non-corrosive and / or suspension-free liquids.
AH-1300063
PBVK-100100-FL90
AH-1327654
PBVK-100100-FL90-15
AH-1327662
PBVK-100100-FL90-15MN
AH-1633950
PBVK-100100-FL90-15MN-1X3
For other foot valves or questions please contact office.
We offer all spare parts, repair kits, schemas and information for Alfons Haar foot valves.
MN – with emergency opening, 15 – with pressure relief valve 15 bar
FL90 – angle design, FLT – T-design
MA – with Namur magnetic sensor
100100 – flanges DN100TW220 x DN100TW3
10080 – flanges DN100TW220 x DN80TW1
G5 – for bottom loading via manifold suitable
1X3 – with valve for prolonged closure.
S – Balansed. It can be used for closing valve for bottom loading
U – Non balansed. It cann’t be used for closing valve for bottom loading
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
14 / 77
1.7. Nozzles and parts
ELAFLEX
ZV 400/500
ZV-400-1
Flow rate: 450 l/m
Inlet: 1 ½”M swivel
High performance
manual operated
ZV-400-3F
dispensing nozzles
Flow rate: 450 l/m
with “TW” coupling MK Inlet:1½”F thread
50 for Diesel, fuel oil,
petroleum etc. Operating
ZR19
ZR32
pressure up to 10 bar
ZV-432-1
Flow rate: 250 l/m
Inlet:1½”М swivel
Spaut: 1½”(32mm)
ZV-438-1
Flow rate: 400 l/m
Inlet:1½”М swivel
Spaut: 1 ½” (38mm)
ZV-438-2
Flow rate: 400 l/m
Inlet: 2”М swivel
Spaut: 1½” (38mm)
ZVA32
EA305
EA389
ED237U
EF184
EK324
EO271-VI
EO301
EO317
ER312
EU226
ZV-400-1F
Flow rate: 450 l/m
Inlet: 1 ½”М thread
ZV-500-2
Flow rate: 750 l/m
ZR38
ZR50
ZV-432-1F
Flow rate: 250 l/m
Inlet:1½”М thread
Spaut: 1½”(32mm)
ZV-438-1F
Flow rate: 400 l/m
Inlet: 1½”М thread
ZV-438-2F
Flow rate: 400 l/m
Inlet: 2”М thread
ZV-400-2
Flow rate: 450 l/m
ZV-500-2F
ZV-500-4F
Flow rate: 750 l/m
Flow rate: 750 l/m
Inlet: 2”F thread
ZRB25
ZRK30
ZRB38
ZV-432-3
Flow rate: 250 l/m
Inlet:1½”F swivel
Spaut: 1½”(32mm)
ZV-438-3
Flow rate: 400 l/m
Inlet:1½”F swivel
ZV-550-2
Flow rate: 650 l/m
Spaut: 2” (50mm)
Nozzle
Piston assembly
Lever assembly 55 mm
Seal 16 x 5 x 5 PU
Hold-open latch
Plastic cover (scuffguard) black
O-ring 35 х 2,5, Viton
O-ring
O-ring
Spout 39 x 185
Washer dia. 16 mm
HIFLO-Automatic nozzle DN 32 (1¼"), flow rate up to
200 l/min. Working
pressure 1,5 - 6 bar. For
gasoline, diesel, fuel oil,
petroleum, Avgas and
Jet-A1. N o t suitable
for viscous oils and
water or solvents.
0190L-586L
ZV-400-2F
Flow rate: 450 l/m
Aluminum 1 ½”, w/o spaut, 400 l/m at 0,7 bar
ZR32FLEX
ZV-432-3F
Flow rate: 250 l/m
Inlet:1½”F thread
Spaut: 1½”(32mm)
ZV-438-3F
Flow rate: 400 l/m
Inlet:1½”F thread
ZV-550-2F
Flow rate: 650 l/m
Spaut: 2” (50mm)
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
0190L-587L
1290L-0055
0297-9030
0297-9040
15 / 77
Aluminum 2”, без Spaut, 650 l/m at 0,7 bar
Automatic, 1½”, alum., 260 l/m at 2bar
Spaut 1 ½” for 0190 and 2190
Spaut 2” for 0190L and 1290L
You can find hose ends, swivels and fitting in catalog “FITTINGS”. Suitable hose you can find in
catalog “HOSES”
SPARE PARTS FOR ZV 400/500
Part #
EA400
EB401
EB405
EB533
EB534
EC408
ED357
EF162
EF411
EG403
EG407
EG467
EK413
EK415
EM551
EO447
EU406
EV402
EW6
GSD-50-NBR
TWK-50AG-MS
TWK-5040AG-MS
TWM-50-MS
VD-24/11-PE
VD-47/34-PE
VD-48/39-PE
VD-60/49-PE
Name
Piston assembly standard
Stem
Pull rod
Lever pin
Split pin
Circlip 51 x 2
Sliding washer 40x30x1
Main spring 86 x 2 mm
Check valve spring
Lever
Stem bearing
Plastic glass insert
Check valve poppet
Bellow
Ring nut M 30
O-ring
Washer dia. 21 mm
Piston
Assembling tool
Seal for TW-50
Crown, 2” М thread
Crown, 1 ½” М thread
Ring for TW w/ lever
Flat seal PU 24/11
Flat seal PU 47/34
Flat seal PU 48/39
Flat seal PU 60/49
Price
Other flat seals you can find in catalog “Fittings”
Other ZVA parts – in catalog “STATIONS”
Other couplings – in catalog “Fittings”
Hoses – in “HOSES”
Swivels
Inlet
Outlet
Bar
Part #
1”AG
1 ½”AG
1 ½”AG
2 “AG
2”AG
1”IG
1”IG
1”F NPT
1 ¼”IG
1 ½”IG
2”IG
1”AG
1 ½”AG
2”AG
2”AG
1 ½”IG
1”AG
1”M NPT
1”M NPT
1 ¼”AG
1 ½”AG
2”AG
10
10
10
10
10
10
25
25
10
10
10
36SLD-5 / DG-100100-MS
DG-150150-AADG-150200-AADG-200200-AADG-200150-AI36SLD-4 / DG-100100-MS
DG-100100-INDG-100100-NNDG-125125-IADG-150150-IADG-200200-IA-
Price
-MS
-SS
For special application as JET, biodiesel, chemicals, AdBlue and others please contact the office.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
16 / 77
1.8. Vapour recovery adapters and valves
DAIS offers a full range of parts for equipment removal system money Vapor Recovery Stage I.
All valves meet the requirements of ADR / EN.
Typical vapour recovery
Case w/o flamearrester.
Case w/ flamearrester.
VAPOUR KAMLOK COUPLINGS
633CV-AL4030
633CV-AL4040
D00272B
H20546M
633CV-AL4040-ST
633CV-AL3030-ST
633RCV-AL4030
VRS-075300-AL
VRS-075300-MS
4”vapour kamlok coupling with hose tail for 3” hose, MS levers
4”vapour kamlok coupling with hose tail for 4” hose, MS levers
Brass handle for 633CV
Seal 4” for 633CV
4”vapour kamlok coupling with hose tail for 4” hose, ST levers
3”vapour kamlok coupling with hose tail for 3” hose, ST levers
4”vapour kamlok coupling with thread 3” female BSP
Hose end hose DN x thread DN80, aluminum
Hose end hose DN x thread DN80, brass
Adapter for vapour recovery
633LVB-201
1711Т-7085
1711T-AL
FD-174
H20009
891BRK
201
Vent valves
• Material: aluminum
• Internal pressure: 500 mbar
• Working t° : -20°C to +70°C
• Flow rate: 950 m3h @ 55 mbar
• External pressure: 2 to 7 bar
• Connection: 3” TW
• Self opening at: 60 mbar
• Seal: Viton GFLT
4” High fl ow vapour recovery adaptor equipped with sight glass
Plastic dust cap for 633LVB-201
Metal dust cap for 633LVB-201
Gasket 4”TTMA for 633LVB-201 from Polyiretane
Repair kit for 633LVB
Sight Glass Repair Kit (replaces 861BRK)
Interlock valve
Т195SVE
1995RK
1995TWD-2B
1995TWD-2BRK
199TWD-SV
1995TWD-RK
LC-94021
SK-088
Vapor recovery vent, EN13083
Repair Kit 1995RK
VAPOR-LINE VENT WITH TW-FLANGE
(replaces 1995TWD-2)
Repair kit 1995TWD-2B
VAPOR-LINE VENT (SMART VENT) WITH
TW-FLANGE
Repair Kit 199TWD-2
VAPOUR HOSE, LENGTH 15 CM, EXCL
CLAMPS.
Clamp 80-85mm, for LC-94021
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
17 / 77
PKVF Vent valve, pneumatically actuated for tank venting leak-proof in case of overturned tank.
AH-1231398
AH-2180897
AH-1640697
AH-1052604
PKVF-65/1B . sequence control, prepared for flamearrester
LTD … tº= -25ºC ÷ 70ºC
PKVF-65/1B-N. sequence control, prepared for
flamearrester LTD … tº= -40ºC ÷ 60ºC
PKVF-65/1B-C. sequence control, with mounted cover. tº=
-25ºC ÷ 70ºC
PKV-65/1B. parallel control, prepared for flamearrester
LTD … tº= -25ºC ÷ 70ºC
LTD Flamearresters. For mounting on PKVF
AH-2180904
AH-1667811
AH-1320960
AH-1321079
AH-1320994
AH-1320986
LTD-3B-60, 3”, low profil, TW. Conn. DN60.
LTD-1B-60, 3”, TW. connection DN60.
LTD-1B, 3”, TW. Conn. oval flange
O-ring 95x2 NBR for LTD-1B and LTD-1B-60
Screen Glas for LTD
Ring for LTD. 3 holes
PVRVF Coaming vacuum safety vent
AH-1362581
PVRVF 4 A1 – Vapour-transfer-valve with sequence
control, pneumatically actuated, for mineral oil tankers,
non-corrosive vapours. for DN 80 hose, Self-opening at
vacuum 30-40 mbar, Temperature range: -25 to 70°C
PVREV Coaming vacuum safety vent with End-of-Line Flame Arrester
AH-1641995
PVREV-100A1E. Coaming vacuum safety vent with
End-of-Line Flame Arrester
FD-154
Gasket for TW1, TTMA 3"
P/V valve and flamearresters SENING
Part #
S-DO70-F
S-DBG-2
Name
P/V vent sequential
Flamearrester, outlet 2” BSP female thread
Price
DAIS provides all spare parts for valves and flamearresters. For more information call the office phone.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
18 / 77
1.9. Overfill protection system LIBERTY
DAIS offers a full range of sensors, testers, connectors and other equipment systems against
overfilling. Both optical and thermistor.
The OPWFTG Civacon Liberty
overfill prevention system is designed for tank
trucks, tank-truck loading bays, storage depots
and service stations. In the event of a possible
overfill situation sensed by the Liberty sensors,
the Liberty rack monitors output relay will send
a signal to a terminal automation system to
shutdown the loading operation.
The Liberty failsafe and self-checking
electronic sensors are available as 2-wire
Thermistor, 2-wire quick start Optic, or 5-wire
Optic.
Directive 94/63/EC 20.12.1994 taken to
control emissions of organic substances during
storage and transport. The important points are:
• 4.3. Referenced connectors must be located on one side of the vehicle.
• 5. Safety lock
• 5.1. Filling is prohibited until there permissive signal from the combined overflow monitor and
grounding. In case of overflow or loss of grounding, the control unit must close drip valve.
• 5.2. Filling hose is permitted only for vapours is not connected to the truck and the free passage
of vapours laundering system to the oil terminal.
• This means that the connectors must be equipped with a pressure sensor. Despite the directive in
the EN13922 for overflow protection writes that the plug must be 10-pin with 4-J slots and a black cap.
OPTIC and THERMISTOR SENSORS CONFORM EN13922
1000R
H70997
NC030082
1112-007EB
1112-0018EB
1301-007GEB
1301-0018GEB
H52936M
1551-0018J
1651-007E
1651-0018E
1051-0018E
ROM 2-wire bottom sensor
Welding socket for 1000R
WELDING boss and blind stop ASSY for bottom sensor
AJUSTABLE 5-WIRE OPTIC SENSOR, 2”, BSPP, 7”
SHAFT, BSPP, CONFORM EN13922. Replaces 1111-007J
AJUSTABLE 5-WIRE OPTIC SENSOR, 2”, BSPP, 18”
SHAFT, BSPP, CONFORM EN13922. Replaces 1111-0018J
Replacement sensor, 5-wire, 7”shaft. Replaces 1301-007E
Replacement sensor, 5-wire, 18”shaft. Replaces 1301-0018E
Replacement cap for sensor
Adjustable 2-wirw optic sensor, 2”, BSPP, 18” shaft, conform
EN13922, suitable for new ROM 3205E. Replaces 1551-0018B
Replacement sensor, 2-wire, 7”shaft, conform EN13922
Replacement sensor, 2-wire, 18”shaft, conform EN13922
ROM 2-WIRE OPTIC SENSOR 18” SHAFT BSPP, SUITABLE
FOR OLD ROM 3204E
1351-007
REPLACEMENT OPTIC SENSOR, 2-WIRE, ROM, 7” SHAFT
1351-0018
REPLACEMENT OPTIC SENSOR, 2-WIRE, ROM, 18” SHAFT
1601-1601
REPLACEMENT THERMISTOR TIP
1410R- 0010
SS316 tube, 12” (305 mm) lenght
1410R- 0020
SS316 tube, 20” (508 mm) length
1410R- 0060
1410R- 0120
Cable glands, acc. ADR, ATEX II 2G 1D, BSP threaded
EL05116
Cable gland, 1/2", for 6-12 mm cable, plastic
EL05116-50
Set of 50pcs cable glands EL05116
EL05117
Cable gland, 1/2", for cable 8-16 mm, plastic
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
19 / 77
ADR cable, oil resistant, ozone and weather resistant, black, 5-wire, according to optic
sensor wire colors
ADR5075-1
Per meter
ADR5075-100
Roll 100 meters
COUPLUNGS AND ACCESSOIRES
4103E
4103E-PS
4150-4150
4403E
4450-4450
4403B
4450B
API PATTERN OPTIC SOCKET, 6-PIN, BASEEFA, 3 JSLOTS, replaces 4100E.
4103E WITH PRESSURE SWITCH CONFORM VOC 94/63C.
Replaces 4100PS
Blue cap and cable for 41030E
10-PIN THERMISTOR SOCKET, GREEN CAP, 4 J-SLOTS.
Replaces 4101E
Green cap and cable for 4403E
10-PIN optic/thermistor socket w/ pressure switch, conform
EN13922 & VOC 94/63C, 4 J-SLOTS. Replaces 4101B.
Black cap and cable for 4403B & 4401B
EL00001
Grounding bolt
1391-1391
5-wire optic tester
1395-1395
Test cable with “BLUE” couplung for 1391-1391
1396-1396
Test cable with “BLACK” couplung for 1391-1391, EN13922
ON BOARD OVERFILL PROTECTION MONITOR
3205E
ROM II PLUS monitor. Handles up to 8 top and 12 bottom
sensors. The Liberty on-board control monitors, with diagnostic
display, 2-wire and 5-wire optic sensor compatibility with all
other brands of rack monitors. Replaces 3204E.
1.10. Compensators, sight flow, DDC
COMPENSATORS FOR TANK TRUCKS
Dais offers all types tank truck compensators for light fuels.
With flanges TW from forget aluminum. Conductive.
Part #
ERV-G50-TW
ERV-G65-TW
ERV-G80-TW
ERV-G100-TW
Price
Selection: ERV-G50-TW
1
2
3
4
ERV- G 50- TW
1. Name
2. Type: G-Yellow. For light fuels.
3. Size /DN/: 50, 65, 80, 100, 125, 150, 200
4. Connecting: TW – with TW flanges fro tank trucks
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
20 / 77
SIGHT FLOW INDICATORS FOR FUELS
Specification of glasses: working pressure 10 bar. Threads BSP, flanges DIN28459
L
83
83
58
D
41
41
41
Part #
SG19-CR
SG19-CR-PROP
SG25-MS
58
41
SG25-CR
58
41
SG25-CR-PROP
125
136
95
95
132
112
135
154
154
174
SG3-MS
SG4-AL
TSG3-MS
TSG3-AL
TSG4-AL
Description
¾” NPT threaded, cromated
¾” NPT threaded, cromated w/ propeler
1” Female BSP x 1”Male BSP, brass
1” Female BSP x 1”Male BSP,
cromated
1” Female BSP x 1”Male BSP,
cremated with propeler
3” Female BSP x 3”Male BSP, brass
4” Female BSP x 4”Male BSP, alum
3” М BSP x TW1, brass
3” М BSP x TW1, alum
4” М BSP x TW3, alum
Price
Description
for SG 1”
for SG3” ,TSG 3”
for SG4” new, TSG 4”
Seal for SG1, PU
Seal for SG3, PU
Seal for SG3 & TSG3, NBR
Seal for TSG4, PU
Price
For industrial sight fglow inducators see INDUSTRIAL EQUIPMENT
SPARE PARTS for Sight low indicators
D
30
90
115
33
88
92
102
d
24,5
76
101
24
77
77
102
S
25
45
50
2
3
6
4.5
Part #
EG122-1
TW514
SG4-NEU-GLASS
VD-33/24-PE
VD-88/77-PE
TWD-80-NBR
SGD-100
Dry Disconnect Couplers
DDCM-050200-AL
DDCM-050200-MS
DDCM-050200-MS
DDCM-065250-AL
DDCM-065250-MS
2”, alum, female, female threaded DN50
2”, brass, female, female threaded DN50
2”, SS, female, female threaded DN50
2 ½ ”, alum, female, female threaded DN65
2 ½ ”, brass, female, female threaded DN65
DDCM-065250-SS
2 ½”, SS, female, female threaded DN65
DDCV-050200-AL
DDCV-050200-MS
DDCV-050200-SS
DDCV-065250-AL
DDCV-065250-MS
DDCV-065250-SS
DDCK-PE25
DDCK-PE50
DDCK-PE65
DDCK-PE80
2”, alum, male, female threaded DN50
2”, brass, male, female threaded DN50
2”, SS, male, female threaded DN50
2 ½ ”, alum, male, female threaded DN65
2 ½ ”, brass, male, female threaded DN65
2 ½”, SS, male, female threaded DN65
Cap far DDCV, polypropelen, DN25
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
21 / 77
1.11. SAFETY AND CONTROL SYSTEM SCS
The SCS sealed parcel delivery system
is intended to monitor liquid products
transported by meter-less tanktrucks, and is in
accordance with the Europia code of practice.
It also follows the recent EU directive on
Volatile Organic Compounds (VOCs) not to
use dipsticks anymore on tanktrucks for
petroleum products.
The SCS system is mounted on bulk
petroleum tanktrucks and has been designed
to allow for the tanktruck to be electronically
sealed, providing a " sealed parcel delivery"
system after the loading has been completed
eliminating the use of dipsticks.
2 Wire
Sensors
5 Wire
Sensors
Proxy
Sensors
Pneumatic
Interface
Gantry
Interface
ZONE 1
ZONE 0
8 Channel
Power Supply
SAFE AREA
SAFETY AND CONTROL SYSTEM-”SCS”
SCS-300
SCS monitor
EPU-600
VCI-500
3470E
897SCS
API-300
MAN-300
MAN-300-I
ESC10-105000
API / Dome
Sensors
SCS Electronics
Pawer supply unit and reserve accumulator supply
Communication interface
Bluetooth printer
4” API Adapter with handle and sight flow indicators
Double sensor for API adapters
Sensor on manhose cover
Sensor for tank tilt
Cable set for SCS-300
24V Truck
Battery
Veh Comms
Interface
Comms
Device
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
22 / 77
1.12. HOSES
Composite hoses GASSOFLEX
GASSOFLEX petrol hoses transfer hoses are constructed from multi-layers of thermoplastic films
which form a sealing and permeation barrier, suported by fabric layers for mechanical strength
To prevent the accumulation of static charge generated in use, all metal parts of the assembly
have been electrically bonded during manufacture
GASSOFLEX composite hoses are suitable for use in operating temperatures from -30ºC to
+115ºC (-22ºF to +240ºF) dependent on the conveyent
CONSTRUCTION
ELECTRICAL
CONTINUITY
Working t°
2”
1м
1,5м
2м
3м
3,5м
4м
4,5 м
5м
5,5 м
6м
2 ½”
3”
4”
The price of the hose ends are included male thread.
Hoses are available in sizes that are not listed in the table.
DAIS offers a hose equipped with a desired quick link from the catalog "FITTINGS".
Selection: GGE-030040-FTDB
1
2
3
4
5
GGE-
0300
40-
FT
DB
1. GGE Product name
2. Lenght: in cm, from 0100 to 3000 /100cm to 3000cm/.
3. Size: 10 – 1”, 15 – 1 ½”, 20 – 2”, 25 – 2 ½”, 30 – 3”, 40 – 4”
4. First end: BF – male thread; FT – flange; KM – quick connector
KAMLOK, TW, Storz; TD – DDC
5. Second and: as pos 4.
Ruber hose PARKER CARBURITE 10
Working tº
Vacuum
Tolerances
I.D.
L
Hose construction
Tube: Black, smooth, NBR rubber compound, resistant to
oil and fuel with an aromatic content not exceeding 50 %
Reinforcement: Synthetic textile fabrics and embedded
steel wire helix
Cover: Black, smooth, antistatic (R < 1 MΩ/m) NBR/SBR
rubber compound, oil, fuel, abrasion, and weather resistant
#
1.
2.
3.
4.
5.
6.
-25 °C ÷ +80 °C
Max. 0,8 bar (600 mm Hg)
≤ I.D. 38 mm: ± 0,79 mm
> I.D. 38 mm: ± 1,59 mm
± 1%
Applications
Designed for suction and delivery of
mineral oils and fuels (with aromatic
content not exceeding 50 %) in road and
rail tankers, service stations and
refineries. For heavy duty applications
CARBURITE H is recommended.
Part #
IH36531012
IH36531002
IH36530205
IH36531001
IH36530208
IH36530211
Price
I.D.
32
38
50
63,5
75
100
O.D.
42
48
60
75
87
114
WP
10 bar
10 bar
10 bar
10 bar
10 bar
10 bar
BP
30 bar
30 bar
30 bar
30 bar
30 bar
30 bar
W
0,98
1,13
1,46
2,09
2,68
4,02
Bend R
190 mm
240 mm
300 mm
380 mm
450 mm
600 mm
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
23 / 77
Ruber hose PARKER CARBOCORD EN 12115
Working tº
I.D.
Manufactured according to EN 12115
meets TRbF 131 Teil 2 par. 5.5
(flame resistance)
Tolerances
O.D.
L.
-25 °C ÷ +80 °C
19 - 38 mm:
± 0,50
50 mm:
± 0,70
63,5 - 100 mm: ± 0,80
31 - 51 mm: ± 1,00
66 - 91 mm: ± 1,20
116 mm:
± 1,60
± 1%
Hose construction
Applications
Tube: Black, smooth, NBR rubber compound, resistant to oil and fuel with an
aromatic content not exceeding 50 %.
Reinforcement: Synthetic textile fabrics and built-in
copper wires to provide electricalcontinuity between both ends.
Cover: Black, smooth, NBR/SBR rubber compound, antistatic (R < 1 MΩ/m),
oil, fuel, abrasion, ageing and weather resistant..
#
1.
2.
3.
4.
5.
6.
7.
8.
Suitable for delivery of oil and
fuel with an aromatic
content not exceeding 50 %.
Part #
IH36522309
IH36522310
IH36522311
IH36522312
IH36522313
IH36522314
IH36522315
IH36522316
Price
I.D.
19
25
32
38
50
63.5
75
100
O.D.
31
37
44
51
66
79.5
91
116
WP
16 bar
16 bar
16 bar
16 bar
16 bar
16 bar
16 bar
16 bar
Ruber hose ELAFLEX TW
Working tº
BP
64 bar
64 bar
64 bar
64 bar
64 bar
64 bar
64 bar
64 bar
W
0,60
0,89
1,00
1,30
2,00
2,40
2,80
3,80
Bend R
125 mm
150 mm
175 mm
225 mm
275 mm
300 mm
350 mm
450 mm
-30 °C ÷ +90 °C, временно до 110 °C
Applications
"Yellow Band" smooth bore tank truck hose with kink resistant steel
helix for all petroleum based products.
Certification. Approved to German military standard VG 95 955
type S. Complies with EN 12115 and EN 1761.
Hose construction
Tube: NBR, black, NBR rubber compound. Resistant to oil and fuel with an aromatic content not exceeding 50
%. Electrical conductivity < 10 6 Ohm.
Reinforcement: Textile braids and embedded non-kinking galvanised steel helix in the conductive layer.
Cover: Chloroprene (CR) black, conductive. Electrical conductivity < 10 6 Ohm.
#
1.
2.
3.
4.
5.
6.
7.
8.
9.
Part #
TW19
TW25
TW32
TW38
TW50
TW63
TW75
TW80
TW100
Price
I.D.
19
25
32
38
50
63
75
80
100
O.D.
31
37
44
51
66
79
91
96
116
WP
20 bar
20 bar
20 bar
20 bar
20 bar
20 bar
20 bar
20 bar
16 bar
BP
30 bar
30 bar
30 bar
30 bar
30 bar
30 bar
30 bar
30 bar
25 bar
W
0,8
0,9
1,2
1,4
2,1
2,8
3,3
3,5
4,7
Bend R
70 mm
80 mm
90 mm
100 mm
130 mm
160 mm
180 mm
190 mm
250 mm
For hoses with steel helix ELAFLEX XTW, LTW, hoses w/o steel helix HD, FHD, XHD and other hoses please consult
office.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
24 / 77
1.13. Hose reels
DAIS presents industry leader for reels Alfons Haar. We offer spare parts and
elements.
Reels are operated manually, pneumatically or
hydraulically. You can find and very compact reels
that seamlessly installed between the cab and the
vessel to tanker.
BROAD HOSE REELS:
For hoses
Price
DN32
DN35
DN38
DN40
DN45
DN50
AH-1675300
HPSI-400-530-305
19
17
15
15
13
AH-1675318
HPSI-400-600-305
32
29
25
26
13
AH-1675342
HPSI-500-600-305
41
37
34
34
18
AH-1675350
HPSI-500-650-405
50
46
25
25
23
20
AH-1675369
HPSI-600-600-305
49
46
43
44
23
AH-1675385
HPSI-600-650-305
72
68
43
44
40
AH-1675407
HPSI-600-800-405
87
81
76
78
49
45
AH-1675415
HPSI-700-600-305
57
54
51
48
26
AH-1675431
HPSI-700-650-405
70
66
38
35
32
30
AH-1675440
HPSI-700-800-405
102
96
91
85
54
51
Reels can be operated with: HK92 - with handle for manual retracting, MZFS - with hydraulic motor, AIR - with pneumatic
motor. We offer reels of different sizes, and all spare parts for them.
Part #
Model
NARROW HOSE REELS:
Z
X
68
4
0
5
73
93
110
115
141
161
178
206
Hose
ID
OD
38
52
40
54
50
66
32
44
38
52
40
54
32
44
50
66
38
52
32
44
40
54
38
52
50
66
Y
900
7.5м
7.5м
5.5м
14м
13м
13м
22м
9м
20м
30м
20м
27м
14м
1000
10м
10м
8м
19м
18м
18м
30м
14м
28м
40м
28м
38м
22м
1100
13м
13м
11м
29м
24м
24м
44м
20м
37м
59м
37м
50м
31м
1200
16.5м
14м
12м
36м
31м
29м
55м
23м
47м
74м
45м
64м
34м
1300
20м
17м
15м
42м
38м
36м
64м
27м
58м
86м
56м
78м
42м
1400
24м
20.5м
19м
50м
47м
43м
76м
34м
71м
102м
67м
96м
52м
1500
28м
25м
23м
61м
55м
52м
93м
44м
83м
120м
76м
110м
66м
1600
33м
29м
28м
1700
38м
34м
29.5м
Operation:
Part #
AH-1627178
AH-1629634
AH-S118591
AH-S118559
AH-S104140
AH-1662275
Name
Operation kit. Chain, plate, etc..
Handle HK92
Hydraulic motor 11 cm³/rev MZFS
Pneumatic motor AirSTAR 237
Price
For a concrete offer for the reel with or without drive please contact our office.
1800
43м
39м
34м
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
25 / 77
1.14. Pumps and filters
Durable pumps for fast and quiet operation. Transport pumps and compressors Blackmer
(www.mouvex.com, www.blackmer.com ) are worldwide used for: Fuel oil delivery truck; Fleet
refueling; Lube oil; Aviation refuelers; Transport of: petro chemicals, gasoline, biofuels, solvents and
many more
BLACKMER TXH3B
BLACKMER TX
MOUVEX CC8
Alfons Haar FPOG 100
PUMPS BLACKMER and MOUVEX
Part #
Р-р
Min Flow rate
Max Flow rate
TX15
CC8-40A
TX2
CC8-50A
TX25
CC8-65A
TX3
TXH3
AH-2152827
CC8-80F
TX4
1.5”
1.5”
2”
2”
2.5”
2.5”
3”
3”
4”
3”
4”
6 m3/h@400rpm
19 m3/h@500rpm
13 m3/h@520rpm
24 m3/h@500rpm
22 m3/h@520rpm
28 m3/h@500rpm
48 m3/h@520rpm
33 m3/h@750rpm
24 m3/h@400rpm
40 m3/h@500rpm
92 m3/h@400rpm
12 m3/h@780rpm
48 m3/h@1200rpm
16 m3/h@640rpm
47 m3/h@1000rpm
27 m3/h@640rpm
61 m3/h@1000rpm
60 m3/h@640rpm
53 m3/h@1200rpm
78 m3/h@1300rpm
81 m3/h@1000rpm
115 m3/h@500rpm
Strainer
Цена
Part #
Price
PF80-CC8-BU-ST
BM-740054
PF80-CC8-BU-ST
BM-740057
PF80-CC8-BU-ST
BM-740062
BM-740062
PF100-CC8-BU-ST
SFY-F04-ST
Hydraulic adapters for BLACKMER and MOUVEX pumps
BM-895141
For pumps
TX1.5, TXD2A, TXD2.5A, TXD1220, TXD1225, TXV2.5, TXH3C,
TLGLF3C, STX2, STX1220
TX1.5, TXD2, TXD1220, STX2, STX1220 (For H-series hydraulic motors)
TXD2A, TXD2.5A, TXD1220, TXD1225, TXV2.5B, TXH3C, TLGLF3C,
STX2, STX1220
LGLD2E, CRL2
BM-895142
TXD3, TXD1230, TXV3B, LGLD3E, CRL3
1.25"
BM-895140
TXD3, TXD1230, TXV3B, LGLD3E, CRL3
1"
BM-895143
TXH35A
1.25"
BM-894425
TX206A (Keyed Pump Shaft)
1.25"
BM-892037
TX206A (Splined Pump Shaft)
1.25"
BM-892228
STX3
1.25"
BM-892229
LGLD4A, CRL4, TLGLF4B
1.25"
Part #
BM-891205
BM-891464
BM-891458
Shaft diam
1"
1"
1.25"
1.25"
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
26 / 77
BLACKMER TX
Pumps series Blackmer TX are specialy designrd for hydrocarbons – gasoline, diesel, kerosene, light
fuels, light oils, JET. Positive displacemet. Double shaft. Integrated by-pass. Макс. pressure 8.6 bar.
1.14.1.
Pos
1
2
4
5
5A
7
8
9
10
12
13A
14
20
21
Part #
BM-411453
BM-431401
BM-411401
BM-920316
BM-920310
BM-423955
BM-471415
BM-471420
BM-471425
BM-471428
BM-471418
BM-471427
BM-471429
BM-451417
BM-451415
BM-531421
BM-021403
BM-261411
BM-091419
BM-093924
BM-091429
BM-031425
BM-031426
BM-920331
Spare parts for BLACKMER TXD2A
Name
RV CAP W/HOLE
ADJUSTING SCREW
COVER
CAPSCREW
CAPSCREW
SPRING GUIDE
SPRING - STEEL/ZINC R/V (36-50 psi)
SPRING - STEEL R/V (76-110 psi) (Std.)
SPRING - STAINLESS R/V (51-75 psi)*
VALVE
VALVE
GASKET
CYLINDER
ROTOR & SHAFT
VANE - DURAVANE®
VANE - BRONZE
VANE - LAMINATE
HEAD
HEAD with drain
CAPSCREW
Price
Pos
24
24A
24B
26
27A
28
35
42
42A
42B
72
73
76
76A
77
88
104
123A
186
Part #
BM-903156
BM-903521
BM-903522
BM-381406
BM-041431
BM-920285
BM-909130
BM-651411
BM-654405
BM-381421
BM-920351
BM-701947
BM-701914
BM-702242
BM-908198
BM-317815
BM-701992
BM-123905
BM-701981
BM-331918
BM-701480
BM-341601
BM-903091
BM-898950
Name
BEARING
LOCKNUT
LOCKWASHER
GASKET
BEARING COVER
CAPSCREW
KEY
FLANGE - 2" NPT
FLANGE - 2" weld
GASKET
CAPSCREW
O-RING 7-SQ CUT 6" ID NIT
O-RING 2-258 FKM
O-RING 2-259 TS PFA
PIPE PLUG
GREASE FITTING
Grease Relief FITTING
PUSH ROD
GASKET
OIL SEAL
SLINGER RING
SHAFT PROTECTOR
LOCKNUT TOOL
MAINT KIT TXD2A
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
1.14.2.
Pos
1
2
4
5
5A
7
8
9
10
12
13A
14
20
21
24
24A
24B
26
Part #
BM-411453
BM-431401
BM-411607
BM-920316
BM-920310
BM-423955
BM-471631
BM-471614
BM-471632
BM-471615
BM-451623
BM-451624
BM-531603
BM-021605
BM-261665
BM-261667
BM-091619
BM-091624
BM-091627
BM-031425
BM-031426
BM-920331
BM-903156
BM-903521
BM-903522
BM-381406
27 / 77
Spare parts for BLACKMER TXD2.5A
Name
RV CAP W/HOLE
ADJUSTING SCREW
COVER
CAPSCREW
CAPSCREW
SPRING GUIDE
SPRING - STEEL/ZINC, (76-110 psi)
SPRING - STEEL/ZINC, (111-125 psi)
SPRING - STAINLESS, (51-110 psi)
SPRING - STAINLESS, (111-125 psi)
VALVE
VALVE (Nickel Plated)
GASKET
CYLINDER
ROTOR & SHAFT double ended
ROTOR & SHAFT single ended
VANE - DURAVANE®
VANE - BRONZE
VANE - LAMINATE
HEAD
HEAD with drain
CAPSCREW
BEARING
LOCKNUT
LOCKWASHER
GASKET
Price
Pos
27A
28
42
42A
42B
42C
72
73
76
76A
77
88
104
123A
186
Part #
BM-041431
BM-041433
BM-920285
BM-651603
BM-651611
BM-651608
BM-381650
BM-920471
BM-920532
BM-920491
BM-701925
BM-701924
BM-702079
BM-701947
BM-701914
BM-702242
BM-908198
BM-317815
BM-701992
BM-121607
BM-701981
BM-331918
BM-701480
BM-341601
BM-903091
BM-898951
Name
BEARING COVER
BEARING COVER
CAPSCREW
FLANGE - 2" NPT
FLANGE - 2 1/2" NPT
FLANGE 2 1/2" weld
GASKET
CAPSCREW 2" NPT Flange
CAPSCREW – 2 ½" NPT Flange
CAPSCREW - 2 ½" Weld Flange
O-RING 2-234 NIT
O-RING 2-234 FKM
O-RING 2-234 TS PFA
O-RING 2-258 FKM
O-RING 2-259 TS PFA
PIPE PLUG
GREASE FITTING
PUSH ROD
GASKET
OIL SEAL
SLINGER RING
SHAFT PROTECTOR
LOCKNUT TOOL
MAINT KIT TXD2.5A
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
1.14.3.
Pos
5
10
14
21
24
24A
24B
26
28
35
42A
42C
72
73
76
76А
77
88
104
153
153D
153L
Part #
BM-920331
BM-531803
BM-091819
BM-920369
BM-903172
BM-903523
BM-903524
BM-381817
BM-920285
BM-909178
BM-381816
BM-702002
BM-701944
BM-908198
BM-317815
BM-701992
BM-121807
BM-533908
BM-331908
BM-331880
BM-701936
BM-711912
BM-903019
BM-898952
Spare parts for BLACKMER TX3
Name
CAPSCREW
GASKET
VANE - DURAVANE®
CAPSCREW
BEARING
LOCKNUT
LOCKWASHER
GASKET
CAPSCREW
KEY
GASKET
O-RING 2-239 NIT
PIPE PLUG
GREASE FITTING
PUSH ROD
GASKET
OIL SEAL
MECHANICAL SEAL (INCN)
O-RING 2-239 NIT
O-RING 2-224 NIT
LOCKNUT TOOL
MAINT KIT TXD3E
Price
28 / 77
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
1.14.4.
Pos
1
2
3
4
5
5A
7
8
9
10
12
13
14
20
21
24
24A
24B
24C
26
27
27A
28
35
42
42A
42B
72
73
76
76A
77
88
104
153
Part #
BM-413957
BM-436307
BM-436355
BM-411904
BM-920351
BM-920348
BM-426355
BM-476305
BM-456315
BM-531903
BM-021906
BM-261950
BM-091924
BM-031908
BM-920510
BM-903182
BM-721937
BM-922104
BM-922923
BM-386950
BM-041905
BM-041903
BM-920491
BM-909135
BM-651900
BM-651905
BM-381903
BM-920532
BM-702023
BM-702024
BM-702093
BM-908198
BM-317815
BM-701992
BM-121905
BM-533908
BM-904190
BM-336958
BM-898953
Spare parts for BLACKMER TX4
Name
RV CAP W/ HOLE
ADJUSTING SCREW
LOCKNUT
COVER
CAPSCREW
CAPSCREW W/ HOLE
SPRING GUIDE
SPRING - STEEL/ZINC
VALVE
GASKET
CYLINDER
ROTOR & SHAFT
VANE - DURAVANE®
HEAD
CAPSCREW
BEARING
LOCK COLLAR
SETSCREW
NUT
GASKET
BEARING COVER
BEARING COVER
CAPSCREW
KEY
FLANGE
FLANGE
GASKET
CAPSCREW
O-RING 2-274 NIT
O-RING 2-274 FKM
O-RING 2-274 TS PFA
PIPE PLUG
GREASE FITTING
FITTING
PUSH ROD
GASKET
OIL SEAL
MECHANICAL SEAL (INCN)
MAINT KIT TX4A
Price
29 / 77
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
1.14.5.
Pos
1
2
4
5
5A
7
8
9
10
14
20
21
24
24A
24B
24C
26
27
28
42
42A
42B
72
73
76
76A
77
88
104
123A
153
186
Part #
BM-411453
BM-431401
BM-411607
BM-920316
BM-920310
BM-423955
BM-471631
BM-451623
BM-531603
BM-091619
BM-031425
BM-920331
BM-903156
BM-903583
BM-903522
BM-924060
BM-383940
BM-041431
BM-920285
BM-651803
BM-655102
BM-381816
BM-920532
BM-920510
BM-701914
BM-908198
BM-317815
BM-701992
BM-121607
BM-701981
BM-331918
BM-701480
BM-331655
BM-341601
BM-903091
Spare parts for BLACKMER TXH3C
Name
RV CAP W/HOLE
ADJUSTING SCREW
COVER
CAPSCREW
CAPSCREW
SPRING GUIDE
SPRING - STEEL/ZINC
VALVE
GASKET
VANE - DURAVANE®
HEAD
CAPSCREW
BEARING
LOCKNUT W/SETSCREW
LOCKWASHER
SETSCREW
GASKET
BEARING COVER
CAPSCREW
FLANGE
FLANGE
GASKET
CAPSCREW
CAPSCREW
O-RING 2-258 FKM
PIPE PLUG
GREASE FITTING
FITTING
PUSH ROD
GASKET
OIL SEAL
SLINGER RING
MECHANICAL SEAL (IVCV)
SHAFT PROTECTOR
LOCKNUT TOOL
Price
30 / 77
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
1.14.6.
Pos
6
7
8
10
13
16
17
4
6
9
11
14
6
7
8
10
13
16
18
19
31 / 77
SPARE PARTS FOR ALFONS HAAR PUMPS
FPCG 80-700 (-500,-600)
Name
Part #
FPCJ, FPCG, FPCN 80-700 (-500,-600)
SAFETY CAP (за FPCG)
AH-1102121
DUST COVER FP 80/1, OPEN
AH-1032760
NEEDLE BEARING RNA 6906 AH-1025518
O-ring 146 х 3, NBR
AH-1039764
Mechanical seal 35 Haar/FAP-D AH-1035432
Vane FP80 delrin 158x25x7.8
AH-1032956
GASKET FOR V 80
AH-1032689
FPFN, FPFG 80-700 (-500, -600)
NEEDLE BEARING RNA 6906 AH-1025518
O-ring 146 х 3, NBR
AH-1039764
Vane FP80 delrin 158x25x7.8
AH-1032956
GASKET FOR 5WS80
AH-1045934
FPFG, FPCG 80-975 (-815, -1135)
SAFETY CAP
AH-1102130
DUST COVER FP 80/2, OPEN
AH-1032859
Needle bearing RNA 69/32
AH-1025496
O-RING 174 X 3 NBR
AH-1020990
VANE FPZ 80/2 158X31x9.8
AH-1048500
ROTOR FP.G 80/2 CPL.
AH-1379190
GASKET FOR 5WS80
AH-1045934
FPFG, FPCG 50
VANE F.FP 50, 68х20
AH-1636185
Strainers and spare parts
AH-1069060
Screen for PF 80/1A, 1000μm, Nylon
AH-1082392
AH-1069086
AH-1145998
Screen for PF 100/6A, 500mic, SS
AH-1046302
Gasket for PF 80
AH-1046310
Gasket for PF 100
Strainer PF 80 - DN 80, TW1 flange, alum. body, 3.4kg
AH-1013102
Strainer PF 80/1A, screen Nylon 1000 mic
Strainer PF 100 - DN 100, TW3 flange, alum. body, 3.7kg
AH-1015660
Strainer PF 100/1A, screen Nylon 1000 mic
AH-1297372
Strainer insert for flowmeter PGMVC 80
Price
FPCG 80-975 (-815, -1135)
FPCG 80-975 (-815, -1135)
Strainer PF80 / PF100
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
32 / 77
1.15. Flowmeters and accesoires
When you need accurate measuring DAIS offers flow ISOIL.
High precision 2 ", 3", For gravity and pump discharge, Electronic or mechanical, With
temperature compensation, with pneumatic control valve specifically designed for tanks.
SBM150G + VEGA T
SBM75 + VEGA T
SBM150G
SBM75 CEE
Electric head: VEGA T with options: temperature compensation , pre
set, valve control
High precision flowmeter SBM150
- 3”; Flow rate from 100 to 1300 l/min
- Material: aluminum
- Accuracy: +/- 0,1 %; Repeatability: 0,01%
- Certifications: MID, ATEX and PED
Equipped with: strainer; air separator; pneumatic check valve;
pneumatic 2-stage control valve; plate
Application: for pump or pump discharging with or without pre set
Electric head: VEGA T with options: temperature compensation , pre
set, valve control
Equipped with: strainer; air separator; check valve; pneumatic 2-way
control valve; plate
Application: for pump discharging with or without pre set
Electric head: VEGA T with options: temperature compensation ,
valve control
Equipped with: strainer; air separator; check valve; pneumatic 2-way
control valve;
Application: for gravity and pump discharging w/o pre set
Mechanical head VR7887
High precision flowmeter SBM75 CEE
Equipped with: strainer; air separator; check valve;
Application: for pump discharging w/o pre set
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
SBM150 CEE
33 / 77
Mechanical head VR7887
High precision flowmeter SBM150 CEE
- 2”; Flow rate from from 100 to 1300 l/min
Equipped with: strainer; air separator, check valve;
Application:for gravity discharging w/o pre set
ACCESSOIRES
VEGA-T
Precision Electric head suitable for SBM32, SBM75, SBM150, P9000.
Specially designed for tanks with large display. Iintuitive controls, Ex,
power battery, temperature compensation. Preset amount.
Suitable for connection to any meter.
PULSE EMITTER EM6422
Pulse emitter EM6422, developed by ISOIL
IMPIANTI, converts the rotary motion of a Positive
Displacement Flowmeter into electric pulses. It
allows the meter to interface with an electronic control device. ATEX II 2 GD-EEx
d IIB T5 100°C, IP67, t°: -40÷75°C, 5÷30 VDC, Bidirectional. Suitable for any
flowmeter.
V705P
TMU295
LS/AS 150
3” aluminium
pre set valve.
Working
temperature: 10°C ≤ T ≤
+100°C.
Maximum working pressure:
1000 kPa.
Printer for tank
truck, 24VDC
3” Filter air separator Basket
with perforated plate in carbon
steel and net in stainless steel
AISI 304 Inlet with welding
counterflange WP 1000 kPa.
Vent valve with SS ball,
leverages and piston in
aluminium. Nitril gaskets. Inlet and outlet
flanges at 90°. Working temperature: -10°C ≤ T
≤ + 50°C. Flow rate to 1300 l/m.
Part #
PT100T
PT100BT
V735
Name
Resistance thermal probe. 4 wires-Class A. Non Ex execution. To be used with VEGA T
counter for tank truck appli cation. Suitable for piping from 2" to 10"
Platinum resistance thermal probe, 4 wire, EEx-d, ½” NPT thread, AISI 316 probe
60mm lenght, suitable for piping form 3" to 10"
3” aluminium air check valve. To be fitted on SBM150 and BM200 meters. ANSI150
FF flanges. Nitril gaskets. Working temperature: -10°C ≤ T ≤ +100°C
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
34 / 77
SPARE PARTS FOR ISOIL SBM150
Pos
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Part #
IS-80COG063
IS-80COB072
IS-80COB339
IS-80PR3075
IS-80RO1180
IS-80DA1018
IS-80VI4267
IS-80SP6021
IS-80CU1100
IS-80GU1630
IS-80GU1627
Name
Body
Front cover
Rear cover
Stud
Washer
Nut
Screw
Dowel pin
Bearing
OR seal, NBR
OR seal, Viton
Price
Pos
11.
12.
13.
14.
16.
17.
18.
19.
Part #
IS-80AL0293
IS-80SP5033
IS-80SP5009
IS-80KI0135
IS-80RO2078
IS-80COC075
IS-80COC045
IS-80DA1006
Name
Rotor spindle
Spirol pin
Spirol pin
Kit BM 36/1
Rotor
Left vanes couple
Right vanes couple
Nut
Price
Spare parts for Alfons Haar flowmeters
Part #
AH-1297372
AH-1297380
Description
Price
Filter basket for PGMVC 80 flowmeter
Filter basket for PGMVC 180 flowmeter
Spare parts for SENING flowmeters
Part #
Description
S-24992
Filter cone with bush for old model flowmeters (FI100/FI-80/GMVZ1000)
S-20641
Spring part for models FI-100/FI-80/GMVZ1000
S-24158
Filter cone without bush for flowmeter (GMVZ1003,
GMVZ1004)
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
35 / 77
Gravity flowmeter ALMA GRAVICOMPT
Gravity metering system - manifold
configuration deliveries of all kind of
petroleum products, on road tanker and
semitrailer devices, GRAVICOMPT
manifold Manifold fully equipped
semitrailer.
• MICROCOMPT Electronic calculator
o Large bright display
o 3 buttons
• ADRIANE 4" Turbine meter
o Equipped with pulse emitter and sight
glass
o Flow rate : from 8 to 80m3/h
• Manifold N compartment equipped :
o Flowrate and preset management
o Dual flow output valve
• Temperature sensor
o For temp. compensation at 15°c or 20°c
GRAVICOMPT advantages
• High accuracy, repeatability & reliability
• Efficient double pulse transmitter for low flow control
• Very low pressure drop, optimum flow-rate
• Flow range: 8-80 m3/h, TTMA flanges, Sight glass
• Reverse flow 150 m3/h for bottom loading
• Category: Ex II 2 G
• Pulse transmitter: 2H00: Ex II 2 G (m) or Ex II 1 G (ia)
ELECTRONIC HEAD
• Category: Ex II 2 (1) G
• Compliance with OIML R. 117 & EMC
• Controls delivery operations, flow regulation, quantitypreset
• Connection to Cab Printer, Bill of delivery, Bills,Reports
• Allows compartment Sealing, connection to on-boardcomputer
• Bright and large display, robust Push-Buttons, easyto-use
Gravity flowmeter ALMA FLEXICOMPT
Мобилен разходомер за контролно измерване на светли
горива и разтворители с вискозитет под 13 cSt. С
енергонезависима памет за последните 100 операции.
Литиеви батерии с живот 4 години.Макс. налягане 5 bar
Куплира се директно на API адаптора при разтоварване
на 4“. Задната страна е на 3“ за куплиране с маркуч
Flow rate 1300л литра в минута, въздухоотделител и
температурен сензор.
Тегло 4,5кг.
ATEX Conformity Zone:1
Accuracy +/- 0.5%,Repeatability 0.02%, Работна
температура от -25 до + 50 градуса
Flowmeter ALMA MOBICOMPT
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
36 / 77
За контролно измерване на светли горива,
монтиране директно на маркуча: на пистолет или на
макарата Flow rate от 40 до 420 литра в минута,
работна температура от -20 до +40°C. Размер DN32
(1 1/4“).Дължина само 16 см
Ех 1G Zone 0 взривозащитен
Захранване на батерии – 7 години живот или 5000
работни часа.
Тегло : 0,750 кг
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
37 / 77
1.16. Manifolds
CF1 – Single maniflod
Allow unloading from API adapters and one hose reel or
flowmeter.
CF1x-yy
x – Number of compartments
yy – distance between center of API adapters: 11”
(2800mm); 14” (356omm)
CF2 – Double manifold
Allow unloading from API adapters and two hose reel or
flowmeter.
CF2x-yy
x – Number of compartments
yy – distance between center of API adapters: 11”
(2800mm); 14” (356omm)
Manifolds ALFONS HAAR
DAIS offers full range of manifolds Alfons Haar and spare parts for them. For more information call
DAIS.
Pos
2
Part #
AH-1294330
AH-1305758
AH-1294055
Name
Price
PK 100 A PN BET KOLLEKTOR DN100 PN10
PMV 100 C PN.MANIFOLD VALVE
VENTILEINSATZ KPL. mit W-AnschluЯ
1.17. Grounding reels
Тяло от пластмаса усилено със стъклени нишки,
Цвят: жълт, Проводник: неръждаема стомана обвита с жълт PUR
Дължина на проводника: 8 m
Съпротивление на целия проводник: 3.6Ω
Работна температура: -20°C - +40°C, Тегло: 4.1 kg
Живот: над 10’000 захващания, Сертификат: Ex II 3G Eex nA I / T6
Part #
KPE
VDV-028
Name
Заземителна макара
Заземителна макара
Price
650,00 лв
380.00 лв
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
II.
38 / 77
TANKS FOR LPG
2.1. New tanks from MACOLA
- OMSP Macola was established in Padua in the early 1970s by Giuseppe and Ferruccio Macola.
- OMSP Macola began by
manufacturing pumps and
measuring instruments for tank
trucks designed to transport
flammable and petroleum
substances.
- At around this time, a new alternative fuel Liquid Petroleum Gas (LPG) came onto the market. OMSP
Macola recognised the importance of this product because of its new properties which were better for the
environment. Thus we began to focus on designs for LPG and this led in 1978 to OMSP Macola bringing
out the first LPG trucks for road transportation.
- To do this, the company needed more space and equipment so we expanded to a second factory near
Padua’s industrial zone.
- We soon consolidated our position in the market, stopped manufacturing goods for the petroleum sector,
and started to specialise in making self-supporting tanks for transporting liquefied gases by road.
- We began to manufacture for the European market and were soon known throughout most of Europe,
the Middle East and Northern Africa.
- Our speciality became high quality technology, and we were validated
by the sector’s most important inspection bodies: TÜV Germany, TÜV
Austria, DNV Norway, DRIRE France, BUREAU VERITAS Spain,
LLOYD’S REGISTER, ISCIR Romania and many other organisations
including Greek, Czeck, Slovenian, Bulgarian etc.
- Design expanded to include sea transportation in agreement with IMO
and RINA, and train transportation in agreement with FS, SNCF and BAM.
- 1997 was a turning point for OMSP Macola because we moved offices (600 m2) and production plant
(4,200 m2) to a new site of 23,000 m2 in the industrial zone of
Saonara near Padova, 800 m from the exit to Padua’s industrial
zone on the Venice-Bologna motorway.
- Today production is more efficient and we are expanding into
new markets.
- In 2005 OMSP Macola opened a subsidiary in Romania for the maintenance and servicing of our large
fleet of gas tankers sold in eastern Europe.
- Today we are ISO 9001 certified, have doubled the surface with a second workshop and office building
on the Saonara site and have become a leader at EU level in the gas road tanker industry with a
production of approximately 150 gas road tankers per year, for LPG, CO2, LIN, LAR LOX transport.
This production is exported throughout Europe and in parts of Africa and the Middle East.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
39 / 77
2.2. Hoses for LPG
RUBBER HOSE
Parker ROBUR
Hose Construction
Tube: Low diffusion rate seamless extruded NBR rubber compound of uniform
thickness.
Reinforcement: Two braids of high tensile steel wire
Cover: Black, SBR/CR rubber compound pin-pricked to prevent the formation of
blisters, resistant to abrasion, oils, ozone and weathering.
Working tº: -30°C ÷ +70°C
Tolerances: Lenght: ± 1%
Applications. Liquid gas applications (methane, propane, LPG) in the
loading and unloading of tankers and in the service stations.
RUBBER HOSE
Parker GASTRUCK 1762
Hose Construction
Tube: Low diffusion rate NBR rubber compound of uniform thickness
Reinforcement: Synthetic textile fabrics, embedded built-in copper wire to
facilitate the electrical connection between the hose and the end couplings
Cover: Black, smooth, antistatic (R < 1 MW/m), abrasion, oil, fuel and weather
resistant NBR/SBR rubber compound. Pin-pricked to prevent the formation of
blisters.
According to EN 1762
Working tº: -30 °C ÷ +70°C
Tolerances: Lenght: ± 1%
Applications. Liquid gas application (methane, propane, LPG) loading of
tankers. According to EN 1762
ELAFLEX LPG
Hose Construction
Tube: Nitrile rubber (NBR), black, seamlessly extruded, electrically conductive,
diffusion resistant
Reinforcement: 2 textile braids/2 crossed tinned copper strands
Cover: Chloroprene (CR), black, perforated, electrically conductive, flame and
abrasion resistant, ozone - UV and ageing resistant.
Applications. As reel hose for supplies to domestic and industrial storage
tanks, as pump hose for vehicle refuelling, for bulk loading and unloading from
rail tankers, road tankers and ships.
Correspond to EN standard 1762.
Working tº: -40 °C ÷ +70°C
#
Part #
Price
I.D. /mm/
O.D. /mm/
Work P
19
25
32
38
51
39,5
38,5
45,6
52
66,5
50 bar
50 bar
30 bar
30 bar
30 bar
19
25
32
38
50
31
38
45
52
66
25 bar
25 bar
25 bar
25 bar
25 bar
19
25
32
38
50
31
38
45
52
66
25 bar
25 bar
25 bar
25 bar
25 bar
Burst P
Weight /kg/
Bend R
620 bar
560 bar
440 bar
340 bar
320 bar
1,03
1,41
1,82
2,00
2,86
100 mm
150 mm
200 mm
280 mm
350 mm
100 bar
100 bar
100 bar
100 bar
100 bar
0,61
0,83
1,00
1,27
1,84
160 mm
200 mm
250 mm
320 mm
400 mm
0,6
0,8
1,0
1.2
2,0
100 mm
150 mm
175 mm
200 mm
250 mm
ROBUR
1.
2.
3.
4.
5.
IH36520565
IH36520566
IH36520567
IH36520568
IH36520569
GASTRUCK 1762
6.
7.
8.
9.
10.
IH36520580
IH36520581
IH36520582
IH36520583
IH36520584
LPG
11.
12.
13.
14.
15.
LPG19
LPG25
LPG32
LPG38
LPG50
For other hoses see catalog INDUSTRIAL HOSES.
40 bar
40 bar
40 bar
40 bar
40 bar
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
40 / 77
2.3. Hose ends, nozzles for LPG
ACME hose ends with safety clamps
Part #
For hose
MSL-256175
MSL-326175
MSL-508225
MSL-508325
MSL-758325
ACME feale thread
25x6
32x6
50x8
50x8
75x8
Fem. thread ACME 1¾”
Fem. thread ACME 1¾”
Fem. thread ACME 2¼”
25x6
32x6
38x7
50x7
75x8
Male thread NPT 1”
Male thread NPT 1 ¼”
Male thread NPT 1 ½”
Price
NPT hose ends with safety clamps
SVC-256100-ST
SVC-326125-ST
SVC-387150-ST
SVC-507200-ST
SVC-758300-ST
Flanged hose ends with safety clamps. Flange PN25/40 steel
FSL-025006-ST2
FSL-032006-ST2
FSL-038007-ST2
FSL-050008-ST2
25x6
32x6
38x7
50x8
flange DN32 PN25/40 & flange
DN40 PN25/40
flange DN40 PN25/40
flange DN50 PN25/40
FSL-075008-ST2
75x8
flange DN80 PN25/40
Reducion Female ACME x Male NPT for liquid phase (w/o vapour equalizing), brass
Part #
NPT thread
ACME thread
3175B
3175
3175A
3185
3195
½” M NPT
¾” M NPT
1” M NPT
1 ¼” M NPT
2” M NPT
Price
1 ¾” Female ACME
1 ¾” Female ACME
1 ¾” Female ACME
2¼” Female ACME
3¼” Female ACME
Reducion Female ACME x Male NPT for liquid phase (with vapour equalizing), brass
3171
3171А
3181
3181А
3191
3/8” NPT
½” NPT
¾” NPT
1” NPT
1 ¼” NPT
1¼” ACME
1¼” ACME
1¾” ACME
1¾” ACME
2 ¼” ACME
Reduction Male ACME x Male NPT, brass or steel
Part #
5765E
5767H
5769H
5769K
A5765E
A5769H
A5769K
NPT thread
1” NPT
2” NPT
2” NPT
3” NPT
1” NPT, ST
2” NPT, ST
3” NPT, ST
ACME thread
ACME 1¾”
ACME 2¼”
ACME 3¼”
ACME 3¼
ACME 1¾”
ACME 3¼”
ACME 3¼
Price
ACME thread
ACME 1¾”
ACME 2¼”
ACME 3¼”
Price
Seal
A2697-20R-1
A3184-8R-1
Price
A3194-8R-1
A2697-20R-1
A3194-8R-1
Double nippel Male ACME x Male ACME, brass
Part #
5765М
5767М
5769М
ACME thread
ACME 1¾”
ACME 2¼”
ACME 3¼”
Seal
A2697-20R-1
A3184-8R-1
A3194-8R-1
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
41 / 77
Reduction flange DN50PN25/40 to male thread ACME, steel
Part #
FGM-A5765E
Flange
DN50PN25/40
ACME thread
ACME 1¾”
Price
Seal
Price
A2697-20R-1
Flange with female thead
Flange
Part #
FGM-050100-ST-NPT
DN50PN25/40
Fem. thread
Price
1” fem NPT
Seal for ACME, NBR
Description
Part #
A2797-20R-1
A2697-20R-1
A3184-8R-1
A3194-8R-1
За ACME 1¼”
За ACME 1¾”
За ACME 2¼”
За ACME 3¼”
Price for 1 pc
For 1 pc
Pack
ACME plugs + chain + ring, Nylon
C5763N
C5765N
C5767N
C5769N
Plug, male tread ACME 1 ¼”
Plug, male tread ACME 1 ¾”
ACME cap + chain + ring
3144-91
3174-93
3184-90
3194-90
Cap for female thread ACME 1 ¼”
Cap for female thread ACME 1 ¾”
Blind flanges and gaskets for LPG
Blind flanges, steel
Part #
DN
DN 15
DN20
DN25
DN32
DN40
DN50
DN65
DN80
DN100
Price
Gaskets for, 2mm
Part #
FL-DIN2527-DN15
FL-DIN2527-DN20
FL-DIN2527-DN25
FL-DIN2527-DN32
FL-DIN2527-DN40
FL-DIN2527-DN50
FL-DIN2527-DN65
FL-DIN2527-DN80
FL-DIN2527-DN100
C4300-DN15
C4300-DN20
C4300-DN25
C4300-DN32
C4300-DN40
C4300-DN50
C4300-DN65
C4300-DN80
C4300-DN100
Adapters for liquid and vapour phase REGO
7573DC
Part #
7573DC
3183AC
7579CT
6579C
7579CT
6579C
Description
Adapter 1 ¼” ACME, ¾” M NPT, vapour phase
Adapter 1 ¾” ACME, 1 ¼” M NPT, vapour phase
Adapter 1 ¾” ACME, 1 ¼” M NPT, liquid phase
Adapter 1 ¾” ACME, 1 ¼” M NPT, liquid phase, high flow rate
Price
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
42 / 77
Nozzles and adapters REGO
Elaflex
A7797A
Part #
A7797A
GG10
A7707L
A7708L
A7571LA
A7571LB
A7575L3
A7575L4
А7707L
A7708L
GG10
Vapour phase
Liquid phase
А7571
А7575
Description
Inlet: 1”F NPT, outlet ACME 1 ¾” + holender + check valve
Inlet: 1”F NPT swivel, Outlet ACME 1 ¾” + holender + check valve
Inlet: 1”F NPT, Outlet: 1”F NPT.
Inlet: 1”F NPT, Outlet: 1”F NPT, angle
Adapter ½ ”M NPT x 1 ¼”ACME, w/o valve, for vapour phase
Adapter ¾” M NPT x 1 ¼”ACME, w/o valve, for vapour phase
Adapter 1 ¾” M NPT x 1 ¾”ACME, w/o check valve
Adapter 1”M NPT x 1 ¾”ACME, w/o check valve
Price
Swivels for hose
Part #
Description
DG-100100-IN-MS
Swivel, brass, inlet 1” BSP felame thread, outlet – 1” NPT
threaded. WP 25 bar. Max pressure 40 bar. Seals Viton.
DG-100100-NN-SS
Swivel, SS 316, inlet 1” NPT female thread, outlet – 1” NPT
threaded. WP 25 bar. Max pressure 40 bar. Seals Viton.
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
43 / 77
2.4. Level gauge for LPG – REGO ROTOGAGES®
2.4.1. 1” Rotogages® for Large Mobile Containers
ROTOGAGES 1”
A9091-18L Dial Plate
A9094TS
Тяло за нивомер
A9091М48 Dip tube for reservoir with diam 62”- 79”
A9091М60 Dip tube for reservoir with diam 80”- 99”
A9091М72
Dip tube for reservoir with diam 100”-147”
2.4.2. ¾” Rotogages® for Small Mobile Containers
Rotogages® are designed to provide accurate determination of LPG
container contents. They may be end or side mounted in a standard ¾”
NPT coupling on stationary or mobile containers. To guarantee
accurate measurement, they should not be used on stationary containers
that exceed 60” I.D. or on mobile containers, subject to vibration, with
an I.D. of more than 24”.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
44 / 77
2.5. Safety valves REGO
External Hydrostatic Relief Valves
Designed especially for the protection of piping and shut-off valves where there is a possibility of trapping liquid LP-Gas or
anhydrous ammonia. They may be installed in pipelines and hoses located between shut-off valves or in the side boss of
RegO® shut-off valves..
Materials: Body (3125, 3127, 3129): Brass; Body (SS8001, SS8002, SS8021, SS8022): SS; Spring: SS; Seat Disc: Resilient
Rubber.
Part #
3127G
3129G
3127H
3129H
3127P
3129P
3127J
3129J
3127K
3129K
3125L
3127L
3129L
3127U
3129U
Bar
Body
17.2
MS
19
20.7
24.1
MS
25.9
MS
27.6
31
MS
Thread
Height
¼”
½”
¼”
½”
¼”
½”
¼”
½”
¼”
½”
50
66
50
66
50
66
50
66
50
66
40
50
66
50
66
¼”
½”
¼”
½”
Accessoires
Price
Cap
7545-40
7545-40
7545-40
included
7545-40
3129-40P
7545-40
3129-10*
3129-10*
3129-10*
3129-10*
3129-10*
3129-10*
3129-10*
Semi-Internal “Pop-Action” Pressure Relief Valves
7583G, 8684G, 8685G. Designed for use as a primary relief valve on ASME containers
such as 250, 500 and 1,000 gallon tanks. Underwriters’ Laboratories lists containers systems
on which these types of valves are mounted outside the hood without additional protection,
if mounted near the hood and fitted with a protective cap..
7534G and 7534. Designed especially for use as a primary relief valve on large stationary
storage containers, these low profile relief valves are generally mounted in half couplings.
However, they are designed so that the inlet ports clear the bottom of a full 2” coupling. This
assures that the relief valve should always be capable of maximum flow under emergency
conditions..
External
Thread to
Part #
Bar
Safty cap
Price
thread
tank
7583G
ACME
17
¾”
7583-40X
8684G
ACME
17
1”
8684-40
8685G
ACME
17
1 ¼”
7585-40X
7534B
M. NPT
9
2”
7534-40
7534G
M. NPT
17
Fully Internal “Pop-Action” Pressure Relief Valves
Designed specifically for use as a primary relief valve in ASME transports and delivery
trucks with 2” and 3” NPT couplings.
MATERIALS:
Spring.......................................................................... Stainless Steel
Stem............................................................................ Stainless Steel
Stem Bushing............................................... 17 - 4PH Stainless Steel
Seat Disc................................................... Resilient Synthetic Rubber
Part #
A8434N
A8434G
A8436N
A8436G
Bar
18
17
18
17
Thread
Protective cap, included
2” M. NPT
A8434-11B
3” M. NPT
A8436-11B
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
45 / 77
2.6. Ball valves for LPG
Ball valves female thread
Part #
BV-012-MS
BV-025-MS
BV-032-MS
BV-038-MS
BV-050-MS
Size
½“F
1“F
1 ¼” F
1 ½” F
2” F
WP
32 bar
25 bar
20 bar
20 bar
16 bar
Price
Size
DN15
DN20
DN25
DN32
DN40
DN50
DN65
DN80
DN100
WP
40 bar PN40
40 bar PN40
40 bar PN40
40 bar PN40
40 bar PN40
40 bar PN40
40 bar PN16/40
40 bar PN40
16 bar PN16
Price
WP
40 bar PN40
40 bar PN40
40 bar PN40
40 bar PN40
40 bar PN40
40 bar PN40
40 bar PN40
40 bar PN40
40 bar PN40
Price
Ball valves type FA1 and FA2
Part #
BV-FA1-015-ST
BV-FA1-020-ST
BV-FA1-025-ST
BV-FA1-032-ST
BV-FA1-038-ST
BV-FA1-050-ST
BV-FA2-065-ST
BV-FA2-080-ST
BV-FA2-100-ST
3-way ball valves FA4 (type ‘L’ and ‘Т’)
Part #
BV-FA4-015-ST
BV-FA4-020-ST
BV-FA4-025-ST
BV-FA4-032-ST
BV-FA4-040-ST
BV-FA4-050-ST
BV-FA4-065-ST
BV-FA4-080-ST
BV-FA4-100-ST
Size
DN15
DN20
DN25
DN32
DN40
DN50
DN65
DN80
DN100
DAIS offers pneumatic and electric actuators for ball valves.
For prices and more information please contact our office.
Needle Valves 1224, 1316 and 1318. Inlet male NPT x outlet male NPT
Part #
1224WA
1316WA
1318WA
Inlet
¼” male NPT
9/16” male NPT
9/16” male NPT
Outlet
¼” male NPT
1/8” male NPT
¼” male NPT
Price
Connection
Operation
Tee Handle
Knurled
Slotted
Price
Vent Valves
Part #
TSS3169
3165C
3165SC
¼”NPT
2.7. Sight flo indicators, manometers for LPG
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
46 / 77
Designed to promote maximum pump efficiency, these
indicators enable bulk plant operators to visually inspect
liquid flow conditions.
With glass on both sides of the indicator, flow can be observed from
either side, even under some poor light conditions. The integral swing
check also serves as a back-check valve to prevent reverse flow and
product loss if the hose fails in a loading operation.
Part #
А7794
А7796
Part #
MM100GL
MM63GL
MM63GL-A
Name
Sight flow indicato 2” female NPT thread
Sight flow indicato 3” female NPT thread
Name
Manometer, 25bar, glicerine, DN100, 3/4” BSP threaded, ATEX
Manometer, 25bar, glicerine, DN63, 3/4” BSP threaded, ATEX
Manometer, 25bar, glicerine, DN63, 3/4” BSP threaded, for
control purpose, ATEX
Price
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
47 / 77
2.8. Internal foot valves for LPG and NH3
DAIS presents internal foot valves REGO. Suitable for LPG and NH3. They
can be manually or pneumatically driven and have built excess flow valve.
A3209D
A3212R & A3213R
Part #
Type
A3209D050
A3209D080
A3209DT050
A3209DT080
A3212R105
A3212R175
A3212R250
A3213R200
A3213R300
A3213R400
A3217FR260
A3219FA400L
A3219FA600L
Straight, NPT threaded
Angle, NPT threaded
Angle, NPT threaded
Single flange, right
Straight, ASA 300 lbs
Straight, ASA 300 lbs
A3209PA
A3209TL
3200L
A3219FPA
Part #
A3209PA
A3209TL
A3217FPA
3200L
3200C
A3217RF
Size
1 ¼”
1 ¼”
1 ¼”
1 ¼”
2”
2”
2”
3”
3”
3”
3”
4”
4”
LPG
flow rate
50 GPM
80 GPM
50 GPM
80 GPM
105 GPM
175 GPM
250 GPM
200 GPM
300 GPM
400 GPM
260 GPM
400 GPM
600 GPM
3219FPA
Pneumatic
actuator
Thermal
release
A3209PA
A3209PAF
A3209TL
A3213PA
A3213TL
Price
A3217FPA
A3219FPA
A3213PA
A3219RT
A3213TL
A3217FPA
A3219RT
Name
Price
Part #
Name
Pneumatic actuator
Pneumatic actuator
А3213PA
Thermal release
Thermal release
A3213TL
Pneumatic actuator
Pneumatic actuator
A3219FPA
Operating lever
329.00 лв. A3219RT
Thermal release
Remote Cable Kit: 30m Foot Cable, 6 Cable Clamps, QuickLink, Sign, Fuse Link, Steel
Nut and Bolt
For other type of valves, spare parts, more accessoires, questions please consult DAIS office.
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
48 / 77
2.9. Spare parts, tools
DAIS offers full range of repair kits, maintenance kits, seals and tools for ReGo products. For more
information contact the office.
Repair kits for foot valves 2”
Part #
A3212А-50
A3212А-80
А3212R-50
Name
Repair kit for series А
Set of seals for hendle for series A and R
Repair kit for series R
Price
Repair kits for foot valves 3”
Part #
A3213A-K150
A3213A-K200
A3213A-K300
A3213A-K400
A3213A-50
A3213A-80
Name
Spring for excess flow, О-ring + piston
Repair kit
Repair kit
Price
Maintenance kits for nozzles А7797
Part #
A7797-10M
A7797-13M
A7797-50
A7797-75
A7797A-4
Name
Handle kit
Body kit
Set of seals
Piston, threaded adaptor, handle kit
Piston, threaded adaptor
Price
Name
Tool for А8434
Tool for А8436
Aluminium key for ACME thread
Price
Tools
Part #
А8434-40
А8436-40
3195-50
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
49 / 77
2.10. Flowmeters for LPG
2.10.1.
Metering systems
High precision flowmeter SBM75 GPL
SBM75 GPL
- MID, PED and ATEX Certified
Electric head: VEGA T with main functions: temperature
compensations; PreSet; valve control
Equipped with: strainer, air eliminator; check valve; differential valve
VEGA T
Precision Electric head suitable for BM200GPL, SBM75GPL.
Specially designed for tanks with large display. Iintuitive controls, Ex,
power battery, temperature compensation. Preset amount.
LPG-Tronic
Get all the advantages of a Turbine Meter :
- Long life reliability, more than 10 years without parts to change
- High accuracy and stability, stop loosing product !
- Small and light, easy to install, easy to calibrate
And all those of a powerful electronic controller :
- Volume and temperature measurement; mass calculation ; display
of all parameters
- Delivery full control, pre-set, Flow control, Inter-locks and Safety
functions, …
- Connection to Cab Printer, on-board Computer, Remote Control
device, Electronic Payment Device, GPS / GPRS, …
ETALCOMPT
Mobile flowmeter for LPG. 2”,connection on ACME thread.
Accuracy +/- 0.5%, Repeatability 0.02%
Working pressure 40 bar (tested at 60 bar)
Flow rate from 6 to 30 m3/h
MA7-A. LPG Meter with mechanical register, differential valve, air
eliminator and strainer
Size: 50mm / 2 "
Flow Range 38-380L/min
Max. Pressure 25Bar/350PSI
Accuracy ±0.2%
Repeatability ≤0.05%
Seal & Gasket Buna"N";Viton;Teflon available
Stranier Mesh 200M LPG only
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
2.10.2.
50 / 77
Spare parts for LC MA7
Pos.
0336
0250
0165
0163
0161
0574
Pos.
0361
0005
0325
Part #
SMP-38344
SMP-38307
SMP-38343
SMP-38306
SMP-38305
SMP-39217
Part #
SMP-38380
SMP-38375
SMP-38375-A
SMP-38407
Name
Gear, 24 teeth
Packing gland assy
Gear , packing assy
Gear, displacement pinion (2)
Gear, blocking rotor
Retaining ring
Name
Reed (AirSeparator)
Filter 100 Mesh (Filter)
Filter 100 Mesh (Filter)
Diaphragm (Diff.valve)
Price
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
51 / 77
2.11. Pumps and spare parts for LPG
2.11.1.
TLGL
Pumps
LGL2,LGL3,LGL4
LGL 1.25, LGL1.5
BV by-pass
Standard mobile pumps for LPG. With a double shaft for direct coupling to the PTO or hydraulic
pump. With built-in by-pass. Full range of spare parts for LPG pumps in stock.
TLGLF3 and TLGLF4 pumps are designed for connecting directly to the flange of the container truck.
This reduces the need for piping, valves, external vazduhootdeliteli that reduce flow and introducing air.
As a result, we have a long life and reliability.
The pumps are equipped with a shaft on both sides. They also have a second emergency drain
output. In addition, both pumps have internal valve reduces noise and vibration
LGLF3 is compact and very easy to work truck. Flow rate from 227 to 416 ref / min.
Pressure up to 8.62 bar.
Blackmer are manufacturer and by-pass valve for LPG. Dimensions are 1 ", 1 ½", 2 ".
BLACKMER LGL PUMPS AND SPARE PARTS
Model
LGB1E
LGRL125
LGRLF125
LGL125
LGLF125
LGL15
LGLF15
4/1R/Q0/1/B/1/0/0/0/0/0/PO
4/AR/Q0/1/B/1/0/0/0/0/0/PO
4/AR/Q0/1/B/1/C/0/0/0/0/PO
4/AR/Q0/1/B/1/0/0/0/0/0/PO
4/AR/Q0/1/B/1/C/0/0/0/0/PO
4/AR/Q0/1/B/1/0/0/0/0/0/PO
4/AR/Q0/1/B/1/C/0/0/0/0/PO
LGLD2
4/40/QA/1/B/1/0/0/0/0/N/PO
LGLH2
4/40/QA/1/B/1/0/0/0/0/X/PO
LGLD3
4/40/QA/1/B/1/0/0/0/0/N/PO
TLGLF3
4/40/QA/1/B/1/0/0/0/1/X/PO
LGLD4
4/40/QA/2/B/1/0/0/0/0/X/PO
TLGLF4
4/40/QA/2/B/1/0/0/0/N/X/PO
rpm
1750 rpm
1750 rpm
1750 rpm
1750 rpm
1750 rpm
1750 rpm
1750 rpm
330 rpm
520 rpm
660 rpm
Flow rate
30 l/m
53 l/m
53 l/m
68 l/m
68 l/m
110 l/m
110 l/m
6,84 m3/h
11,34 m3/h
14,76 m3/h
330
520
640
400
870
330
520
640
400
800
13,38 m3/h
24,54 m3/h
30,18 m3/h
197 l/m
488 l/m
29,52 m3/h
49,98 m3/h
61,32 m3/h
606 l/m
1325 l/m
4/1/0/0
4/1/0/0
5/1/0/0
5/1/0/0
6/1/N/N
10,34 bar
10,34 bar
External by-pass valves BLACKMER
BV075
BV1
BV125
BV15
BV2
Pressure
8,2 bar
10,34 bar
10,34 bar
10,34 bar
10,34 bar
10,34 bar
10,34 bar
3/4”
1”
1.25”
1.5”
2”
rpm
rpm
rpm
rpm
rpm
rpm
rpm
rpm
rpm
rpm
10,34 bar
10,34 bar
8,62 bar
10,34 bar
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
2.11.2.
Spare parts for BLACKMER LGLD2E , LGLD3F
Pos
Name
5
8
9
10
14
21
24
24A
24B
26
28
35
41
42
42A
71
72
73
76
76А
77
104
123A
153
153D
153E
CAPSCREW
SPRING - STEEL/ZINC
VALVE
O-RING 2-230 NIT
VANE - DURAVANE®
CAPSCREW
BEARING
LOCKNUT
LOCKWASHER
GASKET
CAPSCREW
KEY
LINER
FLANGE
O-RING 2-231 NIT
DISC
O-RING 2-257 NIT
PIPE PLUG
GREASE FITTING
FITTING
PUSH ROD
OIL SEAL
SLINGER RING
MECHANICAL SEAL (SNCN)
O-RING 2-226 NIT
O-RING 2-220 NIT
LOCKNUT TOOL
Part #
Price
LGLD2
BM-920331
BM-471423
BM-454405
BM-701919
BM-091419
BM-920351
BM-903156
BM-903521
BM-903522
BM-383940
BM-920285
BM-909130
BM-184405
BM-654401
BM-702004
BM-064412
BM-702022
BM-908198
BM-317815
BM-701992
BM-123905
BM-331918
BM-701480
BM-334439
BM-711924
BM-711918
BM-903091
Part #
Price
LGLD3
BM-920331
BM-475135
BM-455129
BM-701925
BM-095131
BM-920369
BM-903166
BM-903523
BM-903524
BM-385125
BM-920285
BM-909130
BM-185111
BM-655112
BM-702002
BM-065112
BM-702041
BM-908198
BM-317815
BM-701992
BM-125105
BM-331908
BM-335225
BM-702025
BM-711912
BM-903091
52 / 77
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
2.11.3.
Pos
7
8
9
10
13
13A
14
24
24A
24B
26
27
27А
35
41
41
41
41A
41A
41A
71
72
77
77
77
104
153
Part #
BM-423955
BM-471428
BM-453077
BM-711924
BM-262300
BM-263076
BM-093088
BM-903114
BM-903534
BM-903533
BM-383075
BM-043070
BM-043071
BM-909152
BM-183019
BM-183020
BM-183310
BM-183003
BM-183004
BM-183301
BM-063075
BM-701918
BM-123004
BM-123076
BM-123401
BM-331927
BM-333045
Spare parts for BLACKMER – LGL 1.25/ LGL 1.5
Name
SPRING GUIDE
SPRING - STEEL/ZINC
VALVE
O-RING 2-226 NIT
ROTOR & SHAFT
ROTOR & SHAFT
VANE - DURAVANE®
BEARING
LOCKNUT
LOCKWASHER
GASKET
BEARING COVER
BEARING COVER
KEY-SHAFT
LINER
LINER
LINER
LINER
LINER
LINER
DISC
O-RING 2-242 NIT
PUSH ROD
PUSH ROD
PUSH ROD
OIL SEAL
Price
53 / 77
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
2.11.4.
Spare parts for BLACKMER LGLD4B
Pos
Part #
Name
1
2
3
4
5
7
8
9
10
13
14
20
24
24A
25B
26
27
28
35
41
42
42A
42B
71
71A
71B
72
73
74
76
76A
77
88
104
153
186
BM-413957
BM-436310
BM-432039
BM-412001
BM-920663
BM-426355
BM-472039
BM-452001
BM-701946
BM-262041
BM-092019
BM-032041
BM-903166
BM-903541
BM-903542
BM-385125
BM-041815
BM-920285
BM-909183
BM-182000
BM-652005
BM-701937
BM-920640
BM-062039
BM-920015
BM-909634
BM-702039
BM-908198
BM-182040
BM-317815
BM-701992
BM-122009
BM-701926
BM-331908
BM-332050
BM-341801
BM-903092
RV CAP W/ HOLE
ADJUSTING SCREW
NUT
COVER
CAPSCREW
SPRING GUIDE
SPRING - STEEL/ZINC
VALVE
O-RING 2-246 NIT
ROTOR & SHAFT TLGLF4B
VANE - DURAVANE®
HEAD TLGLF4B
BEARING
LOCKNUT
LOCKWASHER
GASKET
BEARING COVER
CAPSCREW
KEY
LINER
FLANGE
O-RING 2-240 NIT
CAPSCREW
DISC
CAPSCREW
LOCKWASHER
O-RING 7-9142 NIT
PIPE PLUG
KEY
GREASE FITTING
FITTING
PUSHROD - COMPOSITE
O-RING 2-221 NIT
OIL SEAL
SHAFT PROTECTOR
LOCKNUT TOOL
Price
54 / 77
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
2.11.5.
Pos
5
8
9
10
13
14
21
24
24A
24B
26
28
35
41
42A
71
72
73
76
76A
77
104
123
186
Part #
BM-920331
BM-471428
BM-451417
BM-701919
BM-265147
BM-095132
BM-920351
BM-903156
BM-903521
BM-903522
BM-383940
BM-920285
BM-909130
BM-185101
BM-702004
BM-065121
BM-711923
BM-908198
BM-317815
BM-701992
BM-121607
BM-331918
BM-701480
BM-341601
BM-903091
BM-898980
BM-899225
BM-899080
BM-899125
Spare parts for BLACKMER TLGLF3C
Name
CAPSCREW
SPRING - STEEL/ZINC
VALVE
O-RING 2-230 NIT
ROTOR & SHAFT
VANE - DURAVANE®
CAPSCREW
BEARING
LOCKNUT
LOCKWASHER
GASKET
CAPSCREW
KEY
LINER
O-RING 2-231 NIT
DISC
O-RING 2-261 NIT
PIPE PLUG
GREASE FITTING
FITTING
PUSH ROD
OIL SEAL
SLINGER RING
SHAFT PROTECTOR
LOCKNUT TOOL
MAINT KIT TLGLF3-ALT
MAINT KIT TLGLF3C
REBUILD KIT TLGLF3-ALT
REBUILD KIT TLGLF3C
Price
55 / 77
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
2.11.6.
56 / 77
PUMP ALFONS HAAR GFPSC 80 912 D4
Самозасмукваща помпа за LPG.
PN 25, Фланци DN 80 , DIN 2501
Раб. об.: 300-650об./мин.
Диференциално налягане pmax = 10 bar
Тегло = 68 kg
Температура: -25°C до +70°C
Теоретичен Flow rate: 912 cm³/U
Part #
AH-1198501
AH-1048500
AH-1128414
Name
Помпа
Ламели FPZ 80/2 MS-EINLAGE 158X31 X 9,8
Механично уплънение
Price
2.12. Compensators
ORANGE BAND expansion joints for LPG acc. to EN 589. For tank trucks and refuelling stations.
Temperature range -20°C up to +90°C, temporarily up to 100°C. Electrically dissipative.
Liner: NBR (nitrile), seamless; Reinforcement: PA textile cord; Cover: CR, pricked; Marking: Orange
band, ERV DN .., PN 25, production date; Flanges: Swiveling, DIN 2635/PN 40 carbon steel, zinc plated
Part #
ERV-OR25-25
ERV-OR32-25
ERV-OR40-25
ERV-OR50-25
ERV-OR65-25
ERV-OR80-25
ЕRV-OR100-25
Name
DN25, flange DN25PN25/40
Price
2.13. Other equipment for LPG
Breakaway valve. Defferent types. For more information consult to the
office or see cataloag FITTINGS, chapter ABV, ABV-S.
Hose reels for LPG.
HPSI 3A-F-1 1/4 600 530 305 RA
HPSI 3A-F-1 1/4 600 600 305 RA
HPSI 3A-F-1 1/4 600 600 305 RA
3-way ball valve ALFA VALVOLE.
Steel, shera - SS304, stem SS410, seal PTFE.
For more 3-way valve consult to the office
2.14. Compressors and spare parts for LPG
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
2.14.1.
Pos
1
1A
57 / 77
BLACKMER LB161
Description
Crankcase Assy – with Oil Filter (std)
Qty
Part No
1
BM-792100
Price
Pos
20
Crankcase Assy – no Oil Filter
BM-792103
21
Crankcase Assy - with Ext. Shaft
BM-792155
22A
Crankcase Assy - Ext Shaft&Oil Filter
BM-792171
30
Description
Bearing Cover Plate
Qty
Part No
1
BM-793106
Oil Seal
1
BM-793143
Bearing Adjustment Shim Kit
1
BM-793133
Oil Filter Fitting
1
BM-794725
Crankcase
1
BM-792102
60A
Gasket - Oil Screen *
1
BM-792136
Oil Intake Screen
1
BM-792135
60B
Gasket - Oil Screen Plug *
1
BM-792123
2B
Oil Filter
1
BM-794726
60C
Gasket - Inspection Plate *
1
BM-792122
2C
Breather Filter
1
BM-792070
60D
Gasket - Bearing Carrier Assy
1
BM-792124
3
Oil Screen Plug
1
BM-792145
60L
Gasket - Oil Pump Cover *
1
BM-794721
2
5A
Oil Pump Kit
1
BM-794760
61A
O-Ring - Oil Screen *
1
BM-792175
7
Oil Pressure Gauge
1
BM-790012
61D
O-Ring - Oil Bayonet *
1
BM-792174
11
Oil Bayonet Assembly
1
BM-792162
63C
Capscrew - Hex Hd
4
BM-793116
12A
Inspection Plate
1
BM-792105
63D
Capscrew - Soc Hd
4
BM-790559
13A
Bearing Carrier
1
BM-792104
63E
Capscrew - Hex Hd
4
BM-792093
15A
Bearing Cup
2
BM-793126
63U
Capscrew - Hex Hd
6
BM-792093
Crankshaft Assy (w\ 18A,19,96B)
1
BM-792157
72B
Elbow
1
BM-790453
BM-792191
73A
Pipe Plug
1
BM-792166
16
Crankshaft Assy-Ext (w\ 18A,19,96B)
18A
19
Bearing Cone
2
BM-793142
96A
Pipe Plug
1
BM-790488
Orifice
2
BM-792146
96B
Pipe Plug
2
BM-790309
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
III.
58 / 77
TANK TRUCKS FOR BITUMEN
PUMP BLACKMER CC8-AP
CC8-AP is specially designed for kardan mounting for high viscosity
products such as heavy oil, bitumen and oils to 900cSt. Vane type. With a
double shaft. Built-in by-pass. The pump is available with three types of bypass: with spring - 4 and 8 bar; without compensating with pneumatic
spring to 5,5 bar; with pneumatic shifter with spring - from 2 to 8 bar. With 12 vane and piston.
CC8-50-AP
CC8-65-AP
Flow rate @750 rpm 36 m3/h(600 l/m) 42 m3/h (700 l/m)
Pressure
8 bar
8 bar
PUMP BLACKMER AM NOYEE
The pump is mounted on a steel shape and is welded directly to the
tank. There are two valves that allow you to perform the following
operations: filling, emptying, transferring.
There is a special opening for pouring solvent after use to prevent
hardening of bitumen
rpm
500 Rpm
400 Rpm
350 Rpm
Flow rate
40 m3/h
32 m3/h
28 m3/h
Pressure
3,5 bar
3,5 bar
3,5 bar
Viscosity
80 Cst
400 Cst
700 Cst
Power
7,5 kW
6,0 kW
5,0 kW
MANHOLES and MANHOLE COVERS
Manhole covers
Part #
Size
20”
KN-3781
KN-AT1210 18 7/8”
Price
Manholes
Part #
KN-2537
KN-1497
For m.cover
KN-3781
KN-AT1210
Price
HOSE FOR BITUMEN
Part #
HB50
HB75
HB100
Price
Hot Bitumen hose "Brown Band", for filling of hot
bitumen and heavy fuel oil. Temperature range -25°
to max. +200°C. Also suitable for all petroleum based
products as the yellow band type TW. Not suitable
for lignite-tar oil and coal-tar oils. Meets EN 13 482.
Lining and cover : NBR, seamless, antistatic
Reinforcements : Two textile braids with tinned
copper strands andembedded steel helix, zinc plated
BALL VALVES FOR BITUMEN WITH HEATING
Description
Ball valves for bitumen, fuel oil and other products which
need heating tap. Material stainless or carbon steel. Sizes
from DN10 to DN200, working pressure PN10-PN40.
With flanges or wafer type.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
IV.
59 / 77
FOOD TANK TRUCKS
4.1. ETA tank trucks for milk, wine and water
Stainless steel road tankers for liquid food products,
milk, wine and water. DAIS is the official representative for
Bulgaria of ETA, France, the world leader in the
manufacturing of road tankers for transport of liquid cargo
food, a world leader in the manufacture of silos for storage of food and non-food products and a major
supplier of worldwide companies such as Nestle, DANONE , L `oreal.
Road tankers and silos are manufactured according to customer size, type of storage desired product
temperature exclusively from INOX.
DAIS offers all consumables and spare parts for the products of ETA, France, butterfly valves, hoses,
special milk armored and special rubber lining of food, different sizes, and electric centrifugal pumps,
flow meters for food.
DAIS also offers a machine for cleaning the inside of tanks, specially developed and patented by the
company ETA, France.
Please for more information contact our office
4.2. Equipment for food tank trucks
Rubber Hose Parker. Different size - 1 ', 2', 3 ', etc.. For more
information you can find in the catalog HOSES. Models:
DRINKPRESS WB/L10, GAMBRINUS WB, ENOTRIA,
FALERNO, MILK SM, RESILO, suitable for different products.
Certificates F.D.A. Coupled with appropriate fittings and clamps
PVC hoses Parker ; Models ALIREX, ENOREX, APERSPIR,
VINITPRES, ITTIREX. Certificates F.D.A., coupled with
appropriate fittings and clamps.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
60 / 77
Stainless steel couplings for hoses : KAMLOK,TW from catalog
FITTINGS
Couplings with male or female tread "dairy produce/milk" thread.
Available with securing brackets/clamps on the side of the hose.
Stainless steel. Types of VMS and MMS. Technical data and
possible sizes can be found in the catalog "fittings"
WHITE BAND expansion joints for foodstuffs, also oil and fat
containing food. Liner conforms to German foodstuff regulations.
Not approved for drinking water. Temperature range -20°C up to
+90°C, temporarily up to 100°C. Electrically non-conductive.
Liner : NBR bright coloured, seamless, abrasion resistant
Reinforcement : PA textile cord; Cover : Chloroprene (CR)
Marking : White band, ERV DN .., PN .., production date
Flanges : Swiveling, PN 10/16, carbon steel, zinc plated
Pumps BLACKMER BLK 4-T for high-viscosity food products
such as glucose syrup, sugar, concentrated orange juice, vegetable
oil, chocolate and ect.
Flow rate: 42 m3 / h
Pressure: 7 bar
Temperature: 120 º C
Advantages: Good, reliable,
stainless steel, reversible, for many
applications, easy maintenance,
easy to clean, compact.
We offer installation and all spare parts for pumps.
Standards: 3A, FDA
Installation: to cardan shaft with electric or hydraulic motor
NOTE! For special applications please contact our office, also about certificates for a concrete food
product.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
V.
61 / 77
CHEMICAL TANK TRUCKS
DAIS offers both new tanks for chemicals and spare parts. For tanks, please refer to the office of DAIS.
5.1. Chemical hoses
Rubber hoses Parker and composite hose GASSOFLEX. Different sizes.
For aggressive chemicals: POLIAX D10, POLIAX D SM, POLIAX
UPE, ELAFLON, ELAFLON PLUS FEP.
For light chemicals: PYTHON, BEVERA,
More information you can find in catalog HOSES.
Dais has hose for any fkuid.
RUBBER HOSE
Parker PYTHON 30
Working tº
Hose construction
Tube: Black, antistatic, smooth EPDM nitrosamine free rubber
compound, resistant to light-chemical media
Reinforcement: Synthetic textile yarns
Cover: Yellow, smooth EPDM nitrosamine free rubber
compound
#
1.
2.
3.
4.
-40°C ÷ +120°C, temporary to 140°C
Application
Designed for air, cold and hot water
and light-chemical media.
Major properties of PYTHON hoses
are: high ozone resistance; antistatic
resistance; high and low temperature
resistance; non-staining cover; high
flexibility
Part #
IH30351256
IH36351250
IH36351251
IH36351253
RUBBER HOSE
Price
I.D.
25
32
38
50
O.D.
37
44
51
66
WP
30 bar
30 bar
30 bar
30 bar
BP
90 bar
90 bar
90 bar
90 bar
Weight
0,88
0,95
1,20
1,93
R min
150 mm
320 mm
380 mm
500 mm
Parker POLIAX CON UPE SM EN 12115
-15 °C ÷ +100 °C For aggressive chemicals and solvents the hose
is intended to be used at room temperature. The hose can be
cleaned and sterilized with usual detergents or steam – a
temperature of +130 °C for short periods..
Application
POLIAX UPE CON SM EN 12115 is suitable for suction and
delivery of a wide range of highly aggressive chemicals such as
most industrial acids, alkalis, oils, fuels and solvents.
Hose construction
Tube: Translucent, smooth, non-conductive ultra high molecular weightpolyethylene (UHMWPE),
suitable for foodstuff contact according to FDA, EEC Directive
Reinforcement: Synthetic textile fabrics, embedded steel wire helix and built-in copper wires to allow
the electrical connection between hose and couplings ( CON)
Cover: Black, antistatic (R < 1 M Ω/m), EPDM rubber compound, heat, abrasion, ageing and weather
resistant.
#
1.
2.
3.
4.
Part #
IH36811530
IH36811531
IH36811532
IH36811534
Price
I.D.
25
32
38
50
O.D.
37
44
51
66
WP
16 bar
16 bar
16 bar
16 bar
BP
64 bar
64 bar
64 bar
64 bar
Weight
0,87
1,07
1,35
2,29
R min
230
260
340
410
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
62 / 77
5.2. Ball valves and butterfly valves
Ball valves for stainless steel. Seals from PTFE. Many types..
Butterfly valves model 899, PTFE liner, Disc from SS, stainless steel scrape
244, seals from Viton..
899-DI50-01
DN50, with handle, cast iron body
899-DI80-01
899-DI100-01
899-SS50-01
DN50, with handle, stainless steel body
899-SS80-01
DN80, with handle, stainless steel body
899-SS100-01 DN100, with handle, stainless steel body
Butterfly valves with wide range of seals. Cast iron body, stainless steel disc
TM-1152050
DN50, NBR seal
TM-1152065
DN65, NBR seal
TM-1152080
DN80, NBR seal
TM-1152100
DN10, NBR seal
TM-1157050
DN50, Silicone seal
TM-1157065
DN65, Silicone seal
TM-1157080
DN80, Silicone seal
TM-1154050
DN50, Viton seal
TM-1154065
DN65, Viton seal
TM-1154080
DN80, Viton seal
Butterfly valves, Teflon coating on the inside, scrape stainless steel fully
Teflon, Teflon seals. Suitable for sulfuric, hydrochloric and nitric acids.
TM-1155050
DN50, PTFE seal
TM-1155050
DN65, PTFE seal
TM-1155080
DN80, PTFE seal
5.3. Fittings
Hose fittings: KAMLOK, TW and many others. Stainless steel and type
FSL from catalog „FITTINGS”
Fittings with male or female "chemical" thread. Securing brackets on
the side of the hose. Stainless steel. Types VCS and MCS. Technical
data and possible sizes can be found in the catalog "fittings"
Teflon flanges.
Teflon male and female threaded ends
Teflon Swivels, reductions, nipples, flanges and more.
Teflon couplings: KAMLOK, TW, STORZ, GUILLEMINE,
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
63 / 77
5.4. Dry dicconnect couplings
Stainless steel valve fittings: DDC, KAMVALOK, DRYDIS 316 ,
Hastelloy and 304 with different types of seals. For more information
catalog "fittings"
Connectors EPSILON for particularly expensive and highly
dangerous chemicals. Two stage opening. Loss of product only 1ml
at 2 "valve.
Working environment - up to 25 bar and 240 ° C. Material SS316 or
Hastelloy.
BREAKAWAY Valves. Wide range of sizes. SS316L or Hastelloy.
For more information please check catalog FITTINGS, ABV, ABVS.
5.5. Flowmeters
Stainless steel flow meters ISOIL. Kit with air separator, strainer,
check valve.
Mechanical or electronic control head. Sizes 2” up to 6”. Approved
type.
DAIS offers full range of spare parts.
Approved for commercial metering.
VEGA-T
Precision Electric head suitable for INOX meters. Specially designed
for tanks with large display. Iintuitive controls, Ex, power battery,
temperature compensation. Preset amount.
5.6. Compensators
Rubber joints ERV-GRxx (green). For acids and bases and
aggressive materials, where xx is the diameter of 25, 32, 40, 50, 65,
80, 100, 125, 150, 200, 250, 300, 350, 400, 500, 600. Operating
pressure 16 bar to size DN150, and 10 bar above DN150. Swivel
flanges PN10/16. Are not suitable for drinking water. Please consult
the chemical compatibility.
ERV-GR50-10
ERV-GR65-10
ERV-GR80-10
ERV-GR50-10
ERV-GR65-10
ERV-GR80-10
DN50, steel flanges
DN65, steel flanges
DN80, steel flanges
DN50, stainless steel flanges
Rubber joints ERV- Teflon coating on the inside. Resistant to all
kind of chemical products
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
64 / 77
5.7. Pumps and compressors
Pumps BLACKMER STX3. Entirely of stainless steel. For acids,
bases, inks, soaps and more. Vane pump with integrated valve.
Double shaft. DAIS offers assembly and all spare parts for pumps.
Not suitable for the sulfuric acid, hydrochloric acid and other highly
aggressive chemicals.
STX3 with Flow rate 946 L / min @ 800 rpm.
STX1220A with Flow rate 348 L / min @ 1,200 rpm,
STX2A with Flow rate 227 L / min @ 780 rpm.
Loading and unloading of AdBlue tanks and wagons.
STX3-DEF with Flow rate of 946 L / min @ 800 rpm.
STX1220A-DEF with Flow rate of 348 L / min @ 1,200 rpm
STX2A-DEF with Flow rate of 227 L / min @ 780 rpm
differential pressure of 8.6 bar
Developed by Stainless Steel 316 with external bearings, metallic
Duravanes, PTFE seals and Blackmer Chem. mechanical seal
PVC pump for highly corrosive chemicals, such as sulfuric and
hydrochloric acid.
STL-01 - a concentration up to 60%
STL-02 - for concentrations above 60%
Vane compressors for chemical discharging BLACKMER
Enterprise. Available mounting and service interventions.
E56 – Flow rate 59m3/h @ 1600rpm
5.8. Other equipment
LIBERTY overfilling protection system for chemical products with
stainless steel sensors 1410R-xxxx.
1410R- 0010
От SS316 с 12” (305 mm) тръба
1410R- 0020
1410R- 0060
Grounding reels. See Grounding reels for tank trucks.
5.9. Seals for manhose covers
PTFE manhole seals. Easy mounting.Different shapes and lengths
FV5005-1510D165
FV5005-2010S165
FV5005-1616D175
FV5005-1616S175
FV-SWR1510R50
FV-S1010-W
FV-S1510-W
Teflon braided seal PTFE 15x10x1650mm
Teflon braided seal PTFE with silicone
20x10x1650mm
Teflon braided seal PTFE 16x16x1750mm
Teflon braided seal PTFE with silicone
15x10x1650mm
Silicone seal, 15 х 10mm, 1м
Square seal,10х10, white rubber, 1m
Square seal,15х10, white rubber, 1m
NOTE! For special applications and chemical compatibility of the chosen items please do not hesitate to
contact our DAIS office.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
VI.
65 / 77
BULK TANK TRUCKS
6.1. Trailers, semitrailers ARDOR
·
·
·
·
Semitrailers for bulk transportation up to 59m3.
Lorry/hopper for bulk food transportation up to 80m3
Trailers for bulk transportation up to32m3.
Superstructures for bukl transportation up 29m3.
More information you can find in catalog „SILO TRAILERS and equipment” and on www.cisterni.eu
6.2. Fittings, valves, manometers
You can find a lot of hose ends, quick qouplers, manometers, valves, etc. in our catalogs
Photo
Part. #
ARD-SNGLB
ARD-301980
ARD-301981
Description
Pneamatic switch 1 pc, red
Pneumatic switch group 2 pcs, red and black
Pneumatic switch group 3 pcd, ref and two black
ARD-301913
Vibration membrane for pinch valve
6.3. COMPRESSORS
DAIS represent on the Bulgarian market screw compressors BLACKMER
Mounting on the tractor directly with cardan shaft or
hydraulic motor, if there is no possibility for shaft
drive. Flow rate of 250 to 1500 m3 / h Suitable for
cement, flour, lime, grain, limestone, sand, sugar,
gravel, feed, PVC granules
More information can be found in the catalog "Bulk
tanks and equipment" in our office and on the addresses www.cisterni.eu
and www.vintovikompresori.com
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
66 / 77
6.4. Hoses
6.4.1. Hoses for abrasive media
RUBER HOSE Parker CEMENT SM 10
-30 °C ÷ +70 °C
Applications
Suitable for suction and delivery of dry cement to road tankers and
storage bins or silos. On request, with built-in copper wires to
provide electrical continuity between both ends (CEMENT SM/E).
Construction
Tube: Black, antistatic smooth BR/NR rubber compound, abrasion resistant (60 - 70 mm2)
Reinforcement: Synthetic textile fabrics, embedded steel wire helix.
Cover: Black, abrasion and weatherresistant, SBR rubber compound.
RUBER HOSE Parker CEMENT 713 10
-30 °C ÷ +70 °C
Applications
Suitable for delivery of dry cement , grain, seeds and animal feed
to road tankers and storage bins or silos.
Construction
Tube: Smooth, black, antistatic, abrasion resistant SBR/ NBR rubber compound: max 60-70 mm2
Reinforcement: Synthetic textile fabrics and builtin copper wire giving electrical
Cover: Black, abrasion and weatherresistant, SBR rubber compound.
RUBER HOSE Parker LIBECCIO EN ISO 3861
-30 °C ÷ +70 °C
Applications
Suitable for conveying of wet and dry sand and grit blasting
materials. This hose is manufactured to carry a working pressure
of 10 bar, but the EN ISO 3861 prescribes a max. W.P. of 6.3 bar.
Construction
Tube: NBR/SBR , smooth, black, antistatic, abrasion resistant, abrasion ISO 4649: max 60 - 70 mm2
Reinforcement: Synthetic textile fabrics yarns.
Cover: Black, smooth, antistatic, weather and abrasion resistant SBR/NBR compound. The cover is
pinpricked to prevent blistering and bubbling, max. resistance on finished hose: 2,0 MΩ/m
RUBER HOSE ELAFLEX ZD
-30 °C ÷ +70 °C
Applications
Grey band hose for dry cement, plaster, kieselguhr, granulates,
wheat and feeding stuffs. The especially thick inner tube is almost
indestructible.
There is practically no abrasion and a comparatively very long life
time is also achieved with abrasive mediums.
Construction
Tube: Special rubber compound black, el. conductive
Reinforcement: One textile braid with tinned copper strands.
Cover: SBR black, electrically conductive
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
#
Part #
Price
I.D.
1.
2.
3.
4.
5.
6.
7.
8.
67 / 77
CEMENT SM 10
IH36923105
75
IH36923102
100
CEMENT 713 10
IH36822217
75
IH36822220
100
LIBECCIO EN ISO 3861
IH36820209
80
IH36820211
100
ZD
ZD75
75
ZD100
100
O.D.
W.P.
B. P.
Weight
Bend Rad
93
118
10 bar
10 bar
30 bar
30 bar
3,53
4,80
450
600
93
120
10 bar
10 bar
30 bar
30 bar
2,92
4,29
900
1200
105
125
10 bar
10 bar
40 bar
40 bar
4,32
5,30
800
1000
91
120
6 bar
6 bar
30 bar
30 bar
3,0
4,5
400
550
6.4.2. Hoses for hot air
RUBER HOSE Parker AIRTEMP 220
-40 °C ÷ +220 °C.
Applications
Hot air delivery hose designed for compressors and pneumatic
systems like flexible connection between motor blower and road
tanker used for dry pellets, abrasive powders and granular material
transport.
Construction
Tube: Black, smooth, insulating, EPR rubber compound with very good resistance to high temperature.
Reinforcement: Synthetic textile fabrics yarns.
Cover: Black (N), smooth, insulating, wrapped finish EPDM rubber compound, resistant to heat,
abrasion, ozone and weather.
RUBER HOSE ELAFLES KS
-30 °C ÷ +160 °C.
Applications
Hot Air Compressor Hose for discharge of silo bulk vehicles.
Temperature range - 30° C up to + 160° C . Special type available
with steel helix.
Construction
Lining : EPDM ( black or light*) colour ), seamless, smooth, higher resistant against hot air
Intermed. layer : EP DM, black
Reinforcement: Textile braids
Cover: Rubberized textile braids
#
1.
2.
1.
2.
Part #
AIRTEMP 220
IH36346012
IH36346013
KS
KS65
KS75
Price
I.D.
O.D.
W.P.
B. P.
Weight
Bend Rad
65
75
83
93
10 bar
10 bar
30 bar
30 bar
2,40
2,62
455
550
65
75
83
93
10 bar
10 bar
30 bar
30 bar
2,40
2,62
455
550
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
68 / 77
VII. COUPLINGS
DAIS offers a full range of hose ends and all types of fittings, such as: KAMLOK, KAMVALOK,
DRYLOK, TW, STORZ, GUILLEMINE and others.
In the catalog "FITTINGS" you will find complete information about fitting, materials and
dimensions.
7.1. KAMLOK
SS
633A
½"
¾"
1"
1¼"
1½"
2"
2½"
3"
4"
5”
6”
633C
½"
¾"
1"
1¼"
1½"
2"
2½"
3"
4”
5”
6”
633E
½"
¾"
1"
1¼"
1½"
2"
2½"
3"
4”
5”
6”
634A
½"
¾"
1"
1¼"
1½"
2"
2½"
3"
4”
5”
6”
SS
SS
SS
MS
MS
MS
MS
AL
633B
½"
¾"
1"
1¼"
1½"
2"
2½"
3"
4”
5”
6"
633D
½"
¾"
1"
1¼"
1½"
2"
2½"
3"
4”
5”
6”
633F
½"
¾"
1"
1¼"
1½"
2"
2½"
3"
4”
5”
6”
634B
½"
¾"
1"
1¼"
1½"
2"
2½"
3"
4”
5”
6”
AL
AL
AL
SS
MS
AL
SS
MS
AL
SS
MS
AL
SS
MS
AL
SEALS FOR KAMLOKs
½” & ¾”
NBR (BUNA)
VITON
1”
1 ¼”
1 ½”
2”
2 ½”
3”
4”
H06595M
H06480M
H06477M
H06430M
H20544M
H20545M H20546M
H20547M
H00966M
H00967M
H00968M
H00972M
H00973M
H00974M H00975M
H00976M
7.2. TW
5”
H20548M
6”
H20549M
H00977M
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
Coupling
Adappter
VK-5040-MS
VK-50-MS
VK-80-MS
VK-100-MS
VK-5040-SS
VK-50-SS
VK-80-SS
VK-100-SS
MK-50-MS
MK-80-MS
MK-100-MS
MK-50-SS
MK-80-SS
MK-100-SS
Chain
K200
TWH-50-MS
TWH-80-MS
Cap for VK
MB-50-MS
MB-80-MS
MB-100-MS
MB-50-AL
MB-80-AL
MB-50-SS
MB-80-SS
Rubber
-NBR
Wight
rubber.
-W
69 / 77
CSM
-CS
Plug for MK
VB-50-MS
VB-80-MS
VB-100-MS
VB-50-AL
VB-80-AL
VB-100-AL
VB-50-SS
VB-80-SS
Poly
uretane
-PE
Viton
EPDM
PTFE
-VI
-EP
-TS
Viton/
PTFE
-TG
Size
/mm/
50
80
100
50
80
TWD-50TWD-80TWO-100GSD-50GSD-80TWD-…-… Flat seals. From different materials.
TWO- …- …O-ring for size 100. From different materials.
GSD-…-.. Seal for high pressure or suction from a great height. Different material for
making
7.3. GUILLEMINE
For hose
Female thread with ot
without lock
Male thread with ot
without lock
Cap with ot without
lock
Information on size, materials and spare parts for GUILLEMINE you will find in the catalog
"FITTINGS" or consult the office. DAIS offers reductions to other connectors.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
70 / 77
7.4. Safety clamps
VHV - Hose fittings (ferrule
type) , male thread, suitable
for self-assembly
MHV - Hose fittings (ferrule
type) , female thread, suitable
for self-assembly
MC - Female hose fittings
with re-usable safety clamps.
SK-E Single bolt clamps
SZ- Double bolt clamps
SC – Safety clamps
VC - Male hose couplings
with re-usable safety
clamps
7.5. Reductions
DAIS offers a full range of reductions, reducers, flanges and nipples, stainless steel, brass or
aluminum. For more information see catalog "FITTINGS" or call us for consultation at the office.
Reductions
Double nippel
Nippel reduction
Socket
Socket reduction
7.6. Other fittings
Hose ends, quick connections, clamps, reductions, and etc. you can find in catalog “FITTINGS”
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
71 / 77
VIII. PIPES, ELBOWS, FLANGES
8.1. Flanges
Flange TTMA with rim for welding, acc. ADR.
Aluminum alloy EN AW 5754/AlMg3.
Working pressure/t° 10 bar - +110°C, to 6 bar - +220°C, for bitumrn.
Øk
Øl
d
D
b
DN
Part #
89
143
124
8 х 11
13
80
TTMA-AL3
108
168
149
8 х 11
13
100 TTMA-AL4
89
143
124
8 х 11
13
80
TTMA-ST3
108
168
149
8 х 11
13
100 TTMA-ST4
Seals for TTMA
143
124
GASK0013
168
149
GASK0014
Flange TW with rim for welding, acc. ADR.
Working pressure/t° 10 bar - +110°C, to 6 bar - +220°C, for bitumrn.
Øk
Øl
d
D
b
DN
Part #
57
154
130
8 х 11
13
50
DN50TW1
76
154
130
8 х 11
13
65
DN65TW1
89
154
130
8 х 11
13
80
DN80TW1
108
174
150
8 х 14
16
100 DN100TW3
133
204
176
8 х 14
18
125 DN125TW5
159
240
210
12 х 14
21
150 DN150TW7
Price
Price
FLANGE SEALS from polyuretane
Part #
FD-154
FD-174
Name
Seal for ТW1, from polyuretane
Seal for ТТМА, TW3, from polyuretane
FD-220/162
Gasket for sump flange
Square flange kit: two flanges, two seals and bolts.
For BLACKMER pumps and strainers. Without rim
for welding
Price
TQFA-ST91
TQFA-ST115
TQFA-SS91
TQFA-AL77
Square alum flange with rim for welding, acc. ADR.
Working pressure/t° 10 bar - +110°C, to 6 bar - +220°C, for bitumrn
Øk
Øl
d
D
b
DN
Part #
108
130
150
4 х 14
19
100 TQFA-AL100
Other seals and flanges you can find in catalog „FITTINGS”.
Price
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
72 / 77
8.2. Pipes, elbows, reductions
Round tubes, DxS, AlMgSi0,5
D
S
Lenght
Part #
56
3
6m
RT-56/3-AL
58
3
6m
RT-58/3-AL
60
3
6m
RT-60/3-AL
76
3
3m
RT-76/3-AL, 3m
86
3
6m
RT-86/3-AL
89
3
6m
RT-89/3-AL, (tube 6m)
89
3
1m
RT-89/3-AL, 1m
108
3
6m
RT-108/3-AL, (tube 6m)
108
3
1m
RT-108/3-AL, 1m
Aluminium elbows for welding small radius, alloy AlMgSi0,5
76
3
ELB-076/3-AL
80
3
ELB-080/3-AL
89
3
ELB-089/3-AL
90
4
ELB-090/4-AL
108
4
ELB-108/4-AL
Price
Concentric reduction, alum, D x d x S, AlMgSi0,5
D
d
S
76
42
3
RDC-76/42/3-AL
76
46
3
RDC-76/46/3-AL
76
48
3
RDC-76/48/3-AL
76
56
3
RDC-76/56/3-AL
89
60
3
RDC-89/60/3-AL
89
76
3
RDC-89/76/3-AL
106
86
3
RDC-106/86/3-AL
108
89
3
RDC-108/89/3-AL
159
108
5
RDC-159/108/5-AL
Eccentric reduction, alum., D x d x S, AlMgSi0,5
D
d
S
76
56
3
ERD-76/56/3-AL
89
60
5
ERD-89/60/5-AL
89
76
3
ERD-89/76/3-AL
108
89
4
ERD-108/89/4-AL
108
89
5
ERD-108/89/5-AL
133
108
3
ERD-133/108/3-AL
133
108
4
ERD-133/108/4-AL
159
108
4
ERD-159/108/4-AL
Saddles, alum., D x S, AlMgSi0,5
D
S
108
43
SLD-108/4-AL
Alloy: EN AW-6060 T66 (AlMgSi0,5)
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
IX.
73 / 77
ADR SAFETY SIGNS FOR VEHILES
DAIS is the official representative of BICMA, Italy,
which has more than 30 years of leadership in the manufacture
and supply of road signs in ADR, ADR clothing, signaling and
signs, reflective marking tapes and signs.
DAIS, accept requests for production of road signs of the Bulgarian language oversized,
special, agricultural and other goods. Please if you do not find your desired product in our catalog do
not hesitate to contact us for more information by phone.
9.1. Standard and folding embossed panels
Embossed panel SS
automatically convertible
petrol - diesel, 300x400
Neutral device 300х400x1
mm, alum-vertical folding
with bracket
Horizontal folding SS
holder 300х400, for
numbers 70x118mm
Embossed panel SS, convertible petrol –
diesel. 300x400 + 300x80
BC-91452
BC-91207
BC-92110
BC-91451
300x400
Stainless
steel
ST – 35.00 лв.
SS – 39.00 лв.
Panels with
interchangeable
embossed numbers for
dangerous load transport
(A.D.R.)
Zinc plated
steel
Код, име на продукт
BC-91001
BC-91002
BC-91003
BC-91004
BC-91005
BC-91006
BC-91007
BC-91008
BC-91009
BC-91010
BC-91011
BC-91012
BC-91013
BC-91014
BC-91015
BC-91033
BC-91633
BC-91035
BC-M
BC-91101
BC-91102
BC-91103
BC-91104
BC-91105
BC-91106
BC-91107
BC-91108
BC-91109
BC-91110
BC-91111
BC-91112
BC-91113
BC-91114
BC-91115
30-1202, diesel
33-1203, gasoline
30-1223, kerosene
23-1965, LPG
23-1978, liruid propane
23-1971, Natural gas
23-1951, Liquid argon
23-1977, Liquid nitrogen
22-2187, Carbon dioxide
223-1966, Liquid hydrogen
225-1073, Liquid oxygen
263-1040, Ethylene dioxide
23-1011, Butane
223-1038, Refrigereted ethylene
223-1972, LNG
60-1710, Toxic substanses
33-1170, Ethanol
30-3256, Heavy oil
30-3257, Bitumen
BC-91040
BC-91080
BC-91081
BC-91082
BC-91083
BC-91084
BC-91085
BC-91086
BC-91087
BC-91088
BC-91089
BC-91090
BC-91051
BC-91052
Stainless steel holder 400 х 300 for numbers 70x118
Stainless steel embossed number „1” 70 х 118, 1 pc.
Stainless steel embossed letter „Х” 70 х 118, 1 бр.
Stainless steel embossed letter „ ” (blank) 70 х 118
Stainless steel embossed numbers set 39.pcs.
Stainless steel embossed numbers set 10pcs.
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
74 / 77
9.2. Identifying marks for vehicles
BC-90111
BC-90112
BC-90116
TIR panel 400 x 250 x 1mm aluminium
TIR vertical folding device 400 x 250 x 1 mm aliminium
TIR horizontal folding device 400 x 250 x 1 mm aliminium
9.3. Extinguisher holders
BC-70001
BC-70003
BC-70012
BC-70011
Plastic extinguisher holder for 6kg black, with rhomboid glass
Plastic extinguisher holder for 6kg red, with rhomboid glass
Plastic extinguisher holder for 9/12kg red, without glass
Plastic extinguisher holder for 6kg red, rhomboid glass
Warning triangle box 430 x
65 x 35 mm
Wheel chock appoved DIN 76051
Hodel for wheel chock with
plastic hook
Wheel chock appoved DIN
76051 with holder
BC-70090
BC-95805
BC-95807
BC-95806
9.4. Articles for ADR
Eyewash bottle
Eyewash bottle with 200
saline solution
Eyewash liquid 200мл
First aid kit
BC-95503
BC-95504
BC-95517
BC-95603
Ventilated elastic glasses
BC-95501
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
75 / 77
9.5. Signals in conformity of ADR regulations
Dangerous substances for the
environment
Self-adhesive flammable gases
cl. 2
Self-adhesive flammable gases
cl. 3
Self-adhesive inflammable
gases on contact in water cl. 4
BC-99639
BC-99628
BC-99602
BC-99605
Self-adhesive explosive
substances cl. 1.1, 1.2, 1.3
substances cl. 1.4
substances cl. 1.5
substances cl. 1.6
BC-99616
BC-99617
BC-99618
BC-99627
Self-adhesive toxic gases cl. 2
Self-adhesive inflammable solid
cl. 4
Self-adhesive comburent or
organic reroxides cl. 5.2
Self-adhesive spontaneously
inflammable substances cl.4
BC-99629
BC-99603
BC-–99636
BC-99604
Self-adhesive radioactive
substances category 2, cl.7/B
Self-adhesive corrosive
substances cl.8
Self-adhesive non inflammable
compressed gas cl.2
Self-adhesive general danger
cl.9
BC-99611
BC-99614
BC-99601
BC-99615
Self-adhesive fissile material
cl.7
Self-adhesive toxic substances
cl.6.1
Self-adhesive biological danger
and decaying matter cl.6.2
substances category 1, cl.7/A
BC-99630
BC-99607
BC-99609
BC-99610
substances category 3, cl.7/C
Self-adhesive radioactive cl.7/D
Self-adhesive signal for
transport over 20°C, cl.9
Self-adhesive comburent or
organic reroxides cl. 5.1
BC-99612
BC-99613
BC-99624
BC-99625
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
76 / 77
9.6. Rear reflecting and fluorescent trailer panels acc.ECE 70
Fig.1
Fig.2
Fig.3
Rear reflecting and fluorescent truck panels with conformity with regulation ECE 070
Fig.1.
Fig.2.
Fig.3.
0.8mm alum
BC-90044
BC-90042
--
0.8mm alum
BC-90054
BC-90052
BC-90097
1.2mm alum
BC-90084
BC-90085
BC-90087
стикер
BC-99201
BC-99202
BC-99203
2mm alum
BC-90070
BC-90081
BC-90075
Rear reflecting/reflecting truck panels with conformity with regulation ECE 070 amendmend 01
Fig.1.
Fig.2.
Fig.3.
0.8mm alum
BC-90151
BC-90152
--
0.8mm alum
BC-90154
BC-90155
BC-90156
1.2mm alum
BC-90095
BC-90086
BC-90088
стикер
BC-99204
BC-99205
BC-99206
2mm alum
BC-90157
BC-90158
BC-90159
Rear reflecting/fluorescent truck panels with conformity with regulation ECE 070 amendmend 01
Fig.1.
Fig.2.
Fig.3.
0.8mm alum
BC-90160
BC-90161
--
0.8mm alum
BC-90163
BC-90164
BC-90165
Fig.4
1.2mm alum
BC-90094
BC-90166
BC-90167
стикер
BC-99207
BC-99208
BC-99209
2mm alum
BC-90168
BC-90169
BC-90170
Fig.5
Fig.6
Rear reflecting and fluorescent truck panels with conformity with regulation ECE 070
Fig.4.
Fig.5.
Fig.6.
0.8mm alum
BC-90043
BC-90041
--
0.8mm alum
BC-90053
BC-90051
BC-90098
1.2mm alum
BC-90083
BC-90089
BC-90091
2mm alum
BC-90069
BC-90082
BC-90077
Rear reflecting/reflecting truck panels with conformity with regulation ECE 070 amendmend 01
Fig.4.
Fig.5.
Fig.6.
0.8mm alum
BC-90171
BC-90172
--
0.8mm alum
BC-90174
BC-90175
BC-90176
1.2mm alum
BC-90096
BC-90090
BC-90092
2mm alum
BC-90177
BC-90178
BC-90179
Rear reflecting/fluorescent truck panels with conformity with regulation ECE 070 amendmend 01
Fig.4.
Fig.5.
Fig.6.
0.8mm alum
BC-90180
BC-90181
--
0.8mm alum
BC-90183
BC-90184
BC-90185
1.2mm alum
BC-90093
BC-90186
BC-90187
2mm alum
BC-90188
BC-90189
BC-90190
стикер
BC-99211
BC-99212
BC-99213
стикер
BC-99214
BC-99215
BC-99216
стикер
BC-99217
BC-99218
BC-99219
9.7. Conspicuity stripes in conformity with ECE 104
Yellow
band
White
band
Red
band
For rigit surface
BC-70701, 50м
BC-70701-1, 1м
BC-70702, 50м
BC-70702-1, 1м
BC-70703, 50м
BC-70703-1, 1м
Self-adhesive
BC-70751, 50м
BC-70751-1, 1м
BC-70752, 50м
BC-70752-1, 1м
BC-70753, 50м
BC-70753-1, 1м
Worm welding
BC-70901, 50м
BC-70901-1, 1м
BC-70902, 50м
BC-70902-1, 1м
BC-70903, 50м
BC-70903-1, 1м
Tel.: +40 21 780 45 58, Fax: +40 21 780 45 58
X.
77 / 77
OTHER EQUIPMENT FROM DAIS
Industrial hoses
Ducting hoses
Safety couplings
Equipment for fuel
service stations
Domestic stations
FITTINGS
Industrial equipment
COMPENSATORS

оборудване за бензиновози

Transcription

Similar documents

Tables PL 1/2007 - Bernhardt design

Hoses

TANK TRAILER PARTS CATALOG

Flüssiggasschlauch LPG Type LPG