Medtronic to Animas® Insulin Pump Switch Guide

“The OneTouch® Ping® meter-remote is amazing. When I’m playing
hockey and my blood sugars are high, I can quickly check, and bolus
right from the remote without having to take the pump out from under
my gear. It lets me get right back in the game!”
Brooke, former Medtronic insulin pump user
Vernon, BC
...step by step.
200 Whitehall Drive
Markham, ON L3R 0T5
Phone: 1-866-600-2233
Email: [email protected]
www.Animas.ca
Animas® and OneTouch® are trademarks owned by Johnson & Johnson and used under licence.
All other trademarks are property of their respective owners.
© 2012 LifeScan Canada Ltd., Burnaby, BC V5C 6S7 AW099-457A 08/2012
Medtronic
to Animas
Insulin Pump
Switch Guide
®
Making the switch...
Some new terms to learn, and how to find what you’re looking for.
Paradigm®
522/722
Insulin Pump
Term
Animas®
Insulin
Pump
Term
Some other differences...
Entering a Bolus:
Menu Location
About this feature
Unique to Animas
In ezCarb and ezBG the final ‘Bolus Total’ screen suggests a bolus total. The bolus amount must then be manually entered. Manual entry allows you to review your final bolus
amount and confirm it. You may choose to adjust the amount depending on activity, such as the food you are eating. Talk to your healthcare professional for guidance in making bolus
adjustments.
Entering or Transferring a Blood Glucose (BG) Reading:
If you do not have your Audio Bolus feature turned on, the
Manual Bolus
Normal Bolus
Bolus > Normal
Use this to deliver a simple bolus in units.
button on the end of your pump will function as a shortcut to
the Normal Bolus screen.
When using ezCarb and ezBG with the OneTouch® Ping® meter-remote, your most recent BG result will be used automatically if it was taken within the last 15 minutes. After 15 minutes,
you will need to re-test BG or manually enter a BG reading. When using the ezCarb and ezBG features on your insulin pump, you will always enter your BG manually.
Cancelling a Bolus or Temporary Basal Program:
ezCarb
Bolus > ezCarb
Use ezCarb to deliver a bolus for Carbs and a correction, or
In ezCarb and ezBG you can edit (change) your I:C ratio, ISF,
for Carbs alone.
and/or BG target right on the screen. This will not change the
Bolus Wizard
default values you entered during Advanced Setup. To change
permanently, you would need to reprogram in the Advanced
Bolus Functions
ezBG
I:C Ratio,
Bolus Wizard Setup
ISF, and BG
Target Setup
Bolus > ezBG
Use ezBG to deliver a correction bolus.
Setup > Advanced >
Set different I:C ratios, ISFs, and BG Targets for up to 12
Screen 7
different time segments.
Setup.
Combo Bolus
In ‘Bolus Total’ Screen,
enter Bolus amount,
scroll to ‘Type’ field,
Combo Bolus: From the BOLUS MENU, select “Combo Bolus”. Details of the active Combo Bolus will be displayed. Scroll to “CANCEL” and press OK.
Temp Basal: From the BASAL MENU, select “TEMP BASAL”. Details of the current active Temp Basal program will be displayed. Scroll up to “CANCEL” and press OK.
NOTE: If you Suspend your pump, any active Combo Bolus or Temp Basal will also be cancelled and the screen display will alert you.
Infusion Set Type
or
Dual Wave Bolus
Normal Bolus: Stop delivery at any time by pressing any button on the front panel of your pump.
Infusion Set Comparison
Bolus > Combo Bolus
Bolus > ezCarb:
In the Combo Bolus screen, adjust the duration and ratio
of Normal & Extended portions of a bolus to meet your
requirements. For example, 30% Normal and 70% Extended.
Your pump is “smart”; it will remember your last duration and
the ratio (as percentages) you programmed.
change to ‘Combo’, then
However, the last programmed Combo Bolus settings will be
select ‘Go’.
cleared each time you change the battery.
Straight (90 degree) Insertion
Paradigm Options
Quick-set®
Mio™
Animas Options
inset® II (integrated inserter)
Fill Cannula Amounts
6mm: 0.30 units
9mm: 0.50 units
inset® 30 (integrated inserter)
Angled Insertion
Silhouette®
0.70 units
comfort®/comfort® short (manual insertion)
Square Wave Bolus
Combo Bolus
See above
In the Combo Bolus screen, set the Ratio to 0% Normal and
100% Extended.
Steel Cannula
Sure-TTM
contact® detach (manual insertion)
No fill cannula required.
Status >Screen 2
Active Insulin
Other Terms & Features
Fixed Prime
IOB
or
If activated, IOB will keep track of any bolus doses that you
(Insulin on
‘Bolus Total’ screens in
take and will let you know how much of that bolus is still
Board)
ezCarb and ezBG
working to lower your BG.
Fill Cannula
Prime/Rewind > Fill
Cannula
Enter the amount of insulin needed to fill the cannula. Refer
to the Instructions for Use included with your infusion set for
details on amounts.
You can decrease your basal rate by 90% (in 10% decrements)
or increase your basal rate by 200% (in 10% increments). You
can also set to OFF. You can set the duration up to 24 hours in
half-hour increments.
Temp Basal
Temp Basal
Basal > Temp
In the Temp Basal screen, enter the desired percentage
change and duration. For example, to decrease basal rate by
10% (ie. 90% temp basal), enter -10%. To increase basal rate
by 10% (ie. 110% temp basal), enter +10%.
Self Check
(Automatic)
---
---
You can find out how much insulin is on board anytime you want
by looking in the status feature on your pump (Status Screen 2).
You will need to re-enter the Fill Cannula amount with each
infusion set change.
The pump is able to use basal increments as low as 0.025 U/hr
at all rates.
The Home screen will show if your Temp Basal is active, the
percentage change, the duration, and how much time is left.
You can choose to turn sound ON or OFF for temp basal in
FAQs:
The Animas pump is waterproof, but can I really swim with it? Will it void my warranty if I have water damage?
Yes, you can leave it on for swimming! The OneTouch® Ping® is tested for immersion in water to a depth of 12 feet (3.6 meters) for 24 hours under normal swimming conditions.
If anything should happen to compromise the waterproof nature of your pump over the duration of your 4-year warranty*, and there has been no misuse or abuse, we replace it.
What options do I have for batteries?
The OneTouch® Ping® is designed to achieve optimum performance and battery life with an Energizer® Lithium L91 AA battery (1.5V). You also have the option to use a regular AA Alkaline
battery if needed (battery life will be significantly reduced). When changing your battery, you must go through the Rewind/Prime sequence. At this time, IOB will re-set to ‘0’ and any Combo
Boluses or Temp Basal Rates will be cancelled. (Tip: Change your battery before a site change and before a meal to make things easier.)
If I am planning a vacation outside of Canada, is there a fee for a travel loaner pump?
At Animas, we offer a free vacation loaner pump for travel outside of Canada. Call Animas Canada Customer Care for more details at 1-866-406-4844.
Setup. If you turned ON the Temp Basal sound, your pump
will beep once every 30 minutes to remind you of Temp Basal
status.
The Animas® pump automatically conducts more than
1.5 million redundant safety cross-checks per day.
Do Animas® insulin pumps have downloading capabilities?
Yes. There are software options available for both Mac and PC platforms. ezManager Max software allows you to create a customized food database for use with your pump, customize
and create alarm tunes, name your pump, name your basal programs, and more! Also now available for Animas insulin pump users is web-based software Diasend®. Diasend® is a
secure, web-based diabetes management system that allows you to store, review, and print your insulin pump and blood glucose data from the Diasend.com website. Animas® insulin
pump users can register for a free account online at www.Diasend.com/animas.
*Please see full warranty details on page 99 of the Canadian OneTouch® Ping® Owner’s Booklet.