rineer hydraulics

RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
CNC VERTICAL MACHINING CENTERS
MAZAK NEXUS CNC Vertical Machining Center, Model
VCN-410A, S/N 171240, New 2004, 16" x 35-1/2" T-Slot Table,
Travels: 22.05" X-Axis, 16.14" Y-Axis, 20.08" Z-Axis, 1,200-lb.
Table Limit, 40-Taper Spindle, 12,000 RPM Spindle, 30Position ATC, Jorgensen Chip Conveyor, Mazatrol 640M
Control
(2) KASAUGA QUANTUM CNC Vertical Machining Centers,
Model Q1000V, S/N Q7090146, New 1997; S/N Q7020074,
New 1996, 23.6" x 55" T-Slot Table, Travels: 42" X-Axis, 24" YAxis, 25.6" Z-Axis, 6.3" - 31.9" Spindle Nose to Table, 50-Taper
Spindle, 6,000-RPM, 30/25 HP, 30-Position ATC, Turbo Chip
Conveyor, Fanuc Series 18-M Control
FEMCO CNC Vertical Machining Center, Model KFV-40, S/N
013251, New 1997, 22-1/2" x 51" T-Slot Table, Travels: 43" XAxis, 22" Y-Axis, 25" Z-Axis, 40-Taper Spindle, 70-9000 RPM,
16-Position ATC, Royal Filter Mist System, 12" x 51-3/8" Sub
Plate w/Mertex 8-1/4" Indexer, Fanuc O-M Control
CNC LATHES
MORI SEIKI CNC Vertical Lathe, Model VL-55, S/N 38, New
1997, Howa 20-1/2" 3-Jaw Chuck, 12-Position Turret, 21.65"
Turning Diameter, 25.98" Turning Length, Travels: 18" X-Axis,
25.98" Z-Axis, 0-2000 RPM, MSC-518 Control, 40/30 HP
FEMCO CNC Slant Bed Lathe, Model WNCL-35/70, S/N
L37040, New 1996, Kitagawa 12" 3-Jaw Chuck, 12-Position
Turret, 24.41" Max. Swing, 16.14" Max. Turning Diameter,
2.95" Bar, 2,500-RPM Spindle, Royal Filtermist System,
Jorgensen Chip Conveyor
TOOLING
(2) TSUDAKOMA Rotary 4th Axis, Pneumatic/Hydraulic
(installed on Q1000V)
(4) Pneumatic Holding Fixtures (Installed on Q1000V)
1
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
(226) CAT 50 Tool Holders & (2) HUOT Tool Scoot 50-Taper
Tool Carts
(145) CAT 40 Tool Holders & (2) HUOT Tool Scoot 40-Taper
Tool Carts
BRIDGEPORT 15" Rotary Table
YUASA 8" Rotary Indexer
R8 & 5C Collets
5C Collet Indexer
Mill Hold Down Tooling
(1) 14" 4-Jaw Chuck, (3) 18" 4-Jaw Chucks
(2) 10" Manual Chucks
CMM & INSPECTION ITEMS
STARRETT CMM, Model HGC2018-16, S/N B-1035, 26" x 293/4" x 4" Drilled & Tapped, Granite Surface Plate, Travels: 20"
X-Axis, 18" Y-Axis, 16" Z-Axis, Renishaw MIP Probe, Epson
LQ570+ Printer
2
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
MAGNAFLUX Magnetic Particle Inspection Machine, Type
XDR-54, S/N 531173 w/Black Light & Demag Coil, KCH-3D
Power Supply, S/N 531077, 600/1250 AMP Continuous Output,
3,000-AMP Intermittent Output
18" x 24" x 3" Granite Surface Plate
Inspection Tooling: MITUTOYO 16" Height Gauge, T&E 012" OD & (3) 0-6" OD Micrometer Sets, Surface Roughness
Gage, (10) 6" & 12" Vernier Micrometers, (2) 0-6" Depth Gage
Sets, Assorted Inside Micrometers, Go-No-Go Gages, Thread
Plugs, (4) 18" x 24" x 4" Granite Surface Plates, Assorted
Height Gages, Crescent Standards, Bore Gages, Numerous
OD Micrometers 0-1" thru 11"-12", Snap Gages, Dial
Indicators, (12) Assorted Torque Wrenches up to 250 ft/lb,
Gage Block Set, Digital Depth Gages
HORIZONTAL BAND SAW
HYD-MECH Vertical Cutting Horizontal Band Saw, Model H16, S/N B0897133H, 16" x 16" Capacity, 10-HP, Coolant, 36"
Hydraulic Shuttle Table w/Single Vise, PLC 100 Control
GRINDERS
OKAMOTO Automatic Surface Grinder, Model ACC12-24ST,
S/N 3022, 12" x 24" Electromagnetic Chuck, Coolant, 6,500SFPM Max. Wheel Speed, 12" x 2" Wheel, Auto/Hand Feeds
OKAMOTO Automatic Surface Grinder, Model ACC8-20ST,
S/N 2053, Kanetsu 8" x 20" Electromagnetic Chuck, 8,000SFPM Max. Wheel Surface Speed, 8" x 1" Wheel, Anilam
Wizard 450 2-Axis DRO, Hand/Auto Feeds, Coolant
(2) CENTRO-METALCUT Rotary Surface Grinders, Model E12, S/N 4033 & 4036, Hydraulic, 11-1/2" Magnetic Rotary
Chuck, Vertical Wheel Head, Coolant, Fluxmaster IV Chuck
Control, Pendant Control
3
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
DELTA Toolmaker Surface Grinder, S/N 95-5025, Walker 41/2" x 10" Permanent Magnetic Chuck, Hand Feeds
CINCINNATI 6" x 18" OD Grinder, S/N 3P1A1Y-11, 7.5-HP
Wheel Lead w/2" Wheel, 1/2-HP Head Stock
NORTON Tool & Cutter Grinder, S/N 7091, 5-1/4" x 36" Table
GRAND RAPIDS Tool & Cutter Grinder, Model 62, S/N
62019, 6" x 42" Table
LATHES
AMERICAN Turnmaster Gap Bed Lathe, Model 17X60, S/N
1760G4069, 15-3/4" 4-Jaw Chuck, 26" Swing Over Gap, 17"
Swing Over Bed, 11" Swing Over Carriage, 60" Between
Centers, 3" Thru Spindle, 20-1600 RPM, Threading, Foot
Brake, Removable Chip Pan, Chip Shield
LODGE & SHIPLEY AVS Engine Lathe, S/N 51276, 16" 4Jaw Chuck, 22" Swing Over Bed, 9" Swing Over Carriage, 20"
Between Centers, 2-1/8" Thru Spindle, 15-2000 RPM, Digital
RPM, Indicator, Threading, Taper, Aloris Tool Holder
Lots of Lathe Tooling, Chucks, Centers, Boring Bars
MILLS
4
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
HERCULES Horizontal Mill w/90-Deg Head, Model 3P, S/N
2362, 12" x 53" T-Slot Table, 8" x 18" Magnetic Chuck, 1500RPM
ACRA 3-HP Vertical Mill, Model AM-2V, S/N 001788, 9" x 42"
T-Slot Table, Servo 150 Table Feed, Anilam Wizard 211 2-Axis
DRO, 60-4200 RPM
FREJOTH 3-HP Vertical Mill, Model AM-2V, S/N 980174, 9" x
42" T-Slot Table, Bestline Super 250 Table Feed, Way Cover,
60-4200 RPM
BRIDGEPORT 1-HP Vertical Mill, S/N 53473, 9" x 42" T-Slot
Table, Bridgeport Table Feed, 80-2720 RPM, (2) 6" Machine
Vises (Breesport Road)
JIG BORER
PRATT & WHITNEY Jig Borer, Model 2A, S/N 1288, 22" x 44"
T-Slot Table, Anilam Wizard 800 2-Axis DRO
GEAR RELATED
BARBER COLMAN Gear Hobber, Model 16-16, S/N 2794,
Single Thread Index Worm
5
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
LEES BRADNER Vertical Gear Hobber, S/N HD-592, 4"
Swing, 56" Between Centers
FELLOWS Gear Shaper, Model 6A, 50-300 SPM
SUNNEN Portable OD Hone
Assorted Gear Hobbers
VIBRATORY PARTS FINISHERS
ULTRAMATIC Vibratory Parts Finisher, 18" x 34-1/2" Tank
w/(2) Dividers
BURR KING Bench Top Vibratory Parts Finisher, Model
Vibra King 200SX
REGENERATIVE HYDRAULIC MOTOR DYNO
6
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
Custom Regenerative Hydraulic Motor Dyno, Capable of
Testing Hydraulic Motors thru 1,200-HP, Variable Pressure,
RPM & Flow, Complete w/Control Console w/Dial & Digital
Gages, IOTECH Data Acquisition System, Motor Adapter
Plates, Himmelstein Torque Sensor, Eaton Fuller Road Ranger
Transmission, MDK Eddy Current Brake System, (3) Closed
Center Regenerative Hydraulic Pumps, (4) Shroeder Hydraulic
Filters w/Dirt Alarms, (4) Thermal Transfer Heat Exchangers,
(1) 350-HP Detroit Diesel Engine w/(2) Hydraulic Pumps,
Evapco Cooling Tower, All Connective Plumbing, Hoses,
Priming Pumps. System is designed for full range testing of any
hydraulic motor.
MOTOR TEST STANDS
Regenerative Hydraulic Motor Test Stand w/Data Acquisition
Software, 75-HP Parker Hannifin Hydraulic System w/Variable
Displacement Pump, PN 61261, S/N 20, 60-GPM Flow, 2000
PSI, Oil Gear Regenerative Pump, Eaton Fuller FS-5205A
Transmission/Cotta Transmission for Speed & Torque Control
(Breesport Road)
Hydraulic Motor Test Stand w/Dual Stations w/Data
Acquisition Software, 75-HP Fixed & 75-HP Variable
Displacement Pump, Parker Hannifin Hydraulic Systems, S/N
22 & 25, Rotorcraft Transmission Gearboxes for Torque
Control (Breesport Road)
Hydraulic Motor Test Stand w/Single Station w/Data
Acquisition Software, 75-HP Parker Hannifin Hydraulic System
w/Variable Displacement Pump, S/N 28, Rotorcraft
Transmission Gearbox for Torque Control (Breesport Road)
HYDRAQUIP Portable Electric Hydraulic System, S/N 2432,
Approx. 200-Gallon Reservoir, (2) 100-HP Hydraulic Pumps
w/Filtration
7
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
AML INDUSTRIES Hydraulic Oil Filtration System, Model
12-413V, S/N 3240, 100-Gallon Reservoir (Breesport Road)
OBERLIN Portable Pressure Filtration System, Model OPF01, S/N 069-MLP, 20-1/2" Filter Media, Allen Bradley
Panelview 300 Micro Control
AIR COMPRESSORS
CHAMPION 5-HP Vertical Air Compressor, 80-Gallon Tank,
Single Cylinder (Breesport Road)
5-HP Horizontal Tank Mounted Air Compressor, 50-Gallon
Header Tank (Breesport Road)
INGERSOLL RAND 3-HP Vertical Air Compressor, S/N
0204300122, 60-Gallon Tank, Single Cylinder
SCALES
FAIRBANKS 1,000-lb. Platform Scale
AND Digital Scale, Model HD-30KB, 60-lb. Capacity
TAYLOR 150-lb. Digital Scale, Model TE150, .2-lb.
Increments
CARDINAL 6-lb. Digital Scale, .0005-lb. Increments
8
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
TRUCKS
2008 FORD F-450 Flatbed Truck, Power Stroke Turbo Diesel,
Cruise, AM/FM, Air, 12' Wood Deck, Single Axle, VIN
1FDXF46R38EE50925
2005 FORD F-450 Flatbed Truck, Turbo Diesel, Cruise,
AM/FM, Air, 12' Wood Deck, Single Axle, VIN
1FDXF46P95ED38852
CRANES
GORBEL 2,000-lb. Free-Standing Bridge Crane, 16' x 16' x
128" Overall, 6'-8" Under Hook, (2) Bridges, Single Electric
Hoist
GORBEL 1,000-lb. Free Standing Bridge Crane, 19'-6" x 44'
x 10'-8" Overall, 7' Under Hook, (2) Underhung Bridges, (1)
Demag Electric 1/2-Ton 2-Speed Hoist, (1) Pneumatic 1/2-Ton
Hoist (Breesport Road)
GORBEL 1,000-lb. Free-Standing Bridge Crane, 12' x 19' x
10' Overall, 6'-6" Underhook, Demag Electric 2-Speed 1/2-Ton
Hoist (Breesport Road)
WELBILT 3-Ton Shop Hoist
CONTRX 1/2-Ton Pedestal Jib, 6' Arm, C-M Pneumatic Hoist
500-lb. Pedestal Jib, 9' Arm, Duff Lynx 500-lb. Electric Hoist
9
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
500-lb. Pedestal Jib, 6' Arm, Pneumatic Hoist (Breesport
Road)
(2) GORBEL 250-lb. Pedestal Jibs, 6' Arm w/Hoists
LIFT TRUCKS & MATERIAL HANDLING
YALE 4,800-lb. Lift Truck, Model GLP050VXERE086, S/N
B875B17963F, 194" Lift, Cushion Tires, Side Shift, 60" Forks,
ROPS
NISSAN 4,050-lb. Lift Truck, Model KAPH02A25V, S/N
KAPH02-90596, LP, 187" Lift, Solid Tire, ROPS (Breesport
Road)
CATERPILLAR 3,000-lb. Lift Trucks (parts/repair), Model
V30D, S/N SHB01550, LP, Solid Tires, 130" Lift, ROPS
8' Lift Truck Fork Extensions
(4) 5,500-lb. Pallet Jacks
(3) 1-Yard & (4) 1/4-Yard Rolling Dump Hoppers
(4) Drum Tilter/Stands
(10) MECO 1,200-lb. Barrel Movers, Model 436
(2) HEVI-HAULER Machine Skates
Runoff Roller Conveyor: 48" x 20', 26" x 10'
MODULAR OFFICE
12'-4" x 10'-4" x 8' Portable Modular Office w/Lights, GE Air
Conditioner
RAW MATERIAL
Large Amount of Scrap Steel
Steel Rod Inventory, up to 9" Widths, Assorted Lengths
10
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
MISCELLANEOUS
EVAPCO Chiller System (Breesport Road)
TORIT Dust Collector, Model 50, S/N 221853-4, 3/4-HP,
3,600-RPM
(2) WEG Drum-Style Dust Collectors
CRAM-A-LOT Baler, S/N 10821048
Custom Rotary Parts Cleaner, Abrasive Blast, Single Nozzle,
Traversing Head, 44" Max. Part Length
36" x 31" Custom 2-Glove Abrasive Blast Cabinet
Custom 3-Cylinder Vertical Hydraulic Broach 3" & 4"
Cylinders w/7" Swing & 36" Stroke, 7" Cylinder w/13" Swing &
48" Stroke, 10-HP Hydraulic Pump & Reservoir, 20-HP Aux.
Hydraulic System for Large Broach, Heat Exchanger, Filtration
System
SCOTCHMAN BEWO Cold Saw, Model 350LT, S/N
B69490305, 3/2.5-HP, Mitering Base
MAKITA 14" Abrasive Chop Saw, Model 2414B
11
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
DEVLIEG Tool Setter, S/N 6374, 12" Swing, 14" Max. Tool
Length; Stocker & Yale View Screen, Model 7MC-1571, AcuRite II 2-Axis DRO
FAMCO 10-Ton Shop Press, Model 10FH36, S/N HP08803305, 36" Between Housings, Electric Hydraulic Pump
(2) #4 Arbor Presses & FAMCO Arbor Press, Model 60R
STUHR 12" x 42" & BROWN & SHARPE 7" x 36" Bench
Centers
DAREX SP2500 Drill Sharpener & (2) Drill Point Sharpeners
(8) SYMBOL Bar Code Reader Systems in Global Equipment
Computer Cabinets
(50) Assorted Steel Machining Holding Fixtures
12
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
LINCOLN AC-225-S Stick Welder; Oxy/Acetylene Torch Cart
& Regulators; Assorted Welding Rod
MILLER DIALARC 250-AC/DC Stick Welder, S/N JB519392,
250-AMP
(4) Impulse Heat Sealers: HACONA 24" (Model C-620),
ULINE 20" (Model H-1252), FLETCHER 12" (Model AIE-300),
ULINE 8" (Model KF-200HC)
GEORGE SCHMIDT Stylus Marker, Type Styliner Mark 3,
Model 2X3C, S/N 13807
10", 8" & 6" Double End Pedestal Grinders
DAYTON 2" Belt Sander on Pedestal Base
DELTA 1" Belt / 8" Disc Grinder, Model 31-340, S/N P2061
CINCINNATI Universal Mill (parts/repair)
Custom Drilling Machine
Custom Automatic Parts Cleaver
13
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
ANDERSON Balance Wheel
REPRO TECHNOLOGY 900 Brown/Blueprint Machine, 48"
Width
TENNANT T5 Electric Floor Scrubber
KRYLON Line Stripers
SKILL 7-1/4" Circular Saw
SENTRY 2260 Portable Safe
TORO Power Sweep Electric Blower
DETROIT DIESEL 350-HP Engine, Model T871
NEWMAN 300-HP Electric Motor
(2) KURT & (1) BRIDGEPORT 6" Machine Vises, 7" & 6-1/2"
Bench Vises, STARRETT 5" Vise on Pedestal Base • (3) 45Gallon Flammable Storage Cabinets: JUSTRITE (Model
25450), EAGLE (Model 1947), EAGLE (Model 1903) • Rolling
Tool Boxes: HUSLEY 11-Drawer, REMLINE 8-Drawer,
KENNEDY & WESTWARD 7-Drawer • Assorted Rolling
Material Carts up to 3,600-lb. Capacity • Lots of Assorted Size
AKRO-BIN Plastic Parts Bins • 35' x 12' Cantilever Racks
w/24", 36" & 48" Arms, Bolted Rack w/Pinned Arms; 24" x 48" x
6'H Steel Shelving; (8) Rolling Steel Material Racks, 15" x 48"
Adjustable Shelves; Bolted Pallet Racks: (1) 12' x 32" x 12', (2)
8' x 32" x 12' • HUOT 4-Drawer Drill Index, Letter, Number,
Fractional Drills; 4-Drawer Number Drill Set • Perishable
Tooling Including Taps, Reamers, End Mills, Inserts, Collets,
Straight & Taper Shank Drills • Lots of Tables, Work Benches,
Rolling Parts Carts, Double Door Cabinets, Foreman's Desk,
(20) RUBBERMAID Mop Buckets, Mops, Brooms, Shovels,
(25) 30" Pedestal Fans (PATTON & LASKO), (10)
PETRAGON Eye Wash Stations • Assorted Packaging
14
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
Supplies Including Box Staplers, Hand Stretch Wrappers,
Banding, Strapping Carts & Banding Tools; MARSH Box
Taper, Model TP2100 • Assorted Hand Tools, Combination
Wrenches, Sockets, Screwdrivers • Hardware Including
Plated & Black Iron Cap Screws, Nuts, Washers, Air &
Hydraulic Fittings, Pipe Fittings, Taper & Roll Pins •
Pneumatic Drills & Grinders, Hydraulic Pumps & Motors,
Portable Lights, Welding Regulators & Hoses, (3) Offset Boring
Leads, (3) 3" x 16" Grinding Wheels, Lifting Chains, RIDGID
Hand Threader Dies, Print File Cabinets, 2-Door Cabinets
OFFICE
(15) Pentium Computers w/Flat Screen Monitors •
AMERICAN DYNAMICS Video Surveillance System w/Monitor
& Cameras • GBC 4250 Laminator • CANNON D860 Copier
• CANNON MP700 Print/Scan/Copier • BROTHER Intellifax
4750 Fax Machine • HP Laserjet 5000 & 4250N Printers,
DELL 1720 DN Printer, (3) HP Laserjet 1012 Printers • APC
Battery Backup System • (15) Assorted Laminate Desks
BREAK ROOM EQUIPMENT
KENMORE Electric Range & Oven • (7) Assorted Microwaves
• AMANA Refrigerator w/Bottom Freezer • KENMORE &
HOTPOINT Refrigerators • Top Freezer • VENDO Drink
Vending Machine • Candy & Chip Vending Machine •
HOSHIZAKI Ice Maker • (3) 36" x 96" Laminate Tables •
MAGIC CHEF Portable Refrigerator • SANYO Color TV •
EMERSON VCR • MANGAVOX DVD • PANASONIC 20"
Color TV w/VCR & DVD Installed
Plant Closed
RINEER HYDRAULICS, INC.
42 Cascade Caverns Road in Fair Oaks Ranch, Texas 78015
15
LODGING
Holiday Inn Express (800) 465-4329
35150 I-10 West Hwy 46, 78006
RINEER HYDRAULICS
th
TUESDAY, MARCH 8 at 10AM in FAIR OAKS RANCH, TEXAS 78015
(Approx. 30 minutes from San Antonio, TX)
TUESDAY, MARCH 8th at 10AM
Hampton Inn (800) 426-7866
34935 I-10 West Hwy 46, 78006
NOTE: Items marked (Breesport Road) will be sold by photo.
The items are located in San Antonio and can be inspected by
appointment only. Call Bill Oliver to schedule an appointment
(513) 738-3311.
LaQuinta Inn (866) 725-1661
36756 I-10 West Hwy 46, 78006
DIRECTIONS
(Approx. 30 minutes from San Antonio)
From the I-410 loop in San Antonio, take Exit #16 to I-10 West.
Go West on I-10 for 20.2 miles to Exit #543 Boerne Stage Rd /
Cascade Caverns Rd. Follow the access road 1/4-mile to
Cascade Caverns Rd. Turn right and go 3/4-mile to sale site.
12% Buyer's Premium On-Site 15% Buyer's Premium On-Line
16