transportable pumps section index - Williams Fire and Hazard Control

Transcription

TRANSPORTABLE PUMPS
TRANSPORTABLE PUMPS
TRANSPORTABLE
PUMPS
Dependapower DPGOU
6040 CAT-R
SECTION
INDEX
Goulds/Caterpillar 6,000 GPM
Description:
Dependapower
DPPAT
4025is CAT-R.
......................................................................
A2system.
The Dependapower DPGOU
6040 CAT-R
a trailer mounted,
diesel driven horizontal split case centrifugal fire water pumping
Nominal performance rating is 6,000 gpm @ 150 psi net (10’ lift). Designed to be moved from one location to another without having to realign
Patterson/Caterpillar
4,000
the pump coupling. Entire assembly is built
on a skidGPM
base which also serves as a fuel tank. Also includes structural frame with lifting lugs and work
lights. Electric start with dual electric primers. Total Package Weight with Fuel = 20,000 lbs.
Dependapower
DPGOU 6040 CAT-R..................................................................... A3
Trailer:
Triple axle 24,000 lb. GAWR steel decked trailer, complete with; electric brakes and coupler, DOT lighting package; leveling jack with rear
Goulds/Caterpillar
6,000 GPM
stabilizer jacks; 235/85 R16 tires/wheels.
Pump Detail:
NHancer
— Low Pressure
/ Hi-Volume Pump.............................................. A4-A5
Manufacturer
Goulds
Series
Model
Fittings
Performance @
Priming
3409
10 x 14 x 20 L
Cast iron casting, Bronze trim
Shutoff 200 psi
6,000 gpm - 150 psi
4,000 gpm - 175 psi
Dual 24 VDC Electric
Driver Detail:
Manufacturer
Model
Power
Electrical System
Cooling System
Caterpillar
3412-DITA
750 BHP @ 1800 rpm
24 VDC
Radiator with pusher fan
Suction Manifold:
14” diameter header, furnished with: six (6) 6” (M) NH inlet connections - capped and one (1) 2.5” valved (F) NST swivel w/plug.
Discharge Manifold:
10” diameter header, furnished with: six (6) 5” Storz discharge connections, capped, six (6) worm gear operated butterfly valves - 5”, two
(2) 2.5” (M) auxiliary valved discharge connections - capped.
Control Panel:
Includes: start/stop switch, tachometer, oil pressure gauge, coolant temperature gauge, amp meter, vernier throttle, compound suction gauge,
discharge pressure gauge, fuel pressure gauge, primer valves & switches, hour meter.
Options:
Jet pump back-up primer
6” NH hard suction hoses (20’ each - 6 req’d) or (10’ each - 12 req’d)
6” Non-floating basket strainers (6 req’d)
PRODUCTS 409-745-3232
A1
WWW.WILLIAMSFIRE.COM
120108
EMERGENCY 409-727-2347
TRANSPORTABLE PUMPS
TRANSPORTABLE PUMPS
Dependapower DPPAT 4025 CAT-R
Patterson/Caterpillar 4,000 GPM
Description:
The Dependapower DPPAT 4025 CAT-R is a trailer mounted, diesel driven horizontal
split case centrifugal fire water pumping system. Nominal performance rating is 4,000 gpm
@ 150 psi (10’ lift). The pump and driver come mounted on a skid containing an integral
325 gallon fuel cell with level indicator. The easily detachable skid is transported on a
dual-axle trailer. The 12” suction and 10” discharge headers provide minimal pressure loss
for maximum efficiency. The 24VDC electrical system comes standard with two group-D
batteries. Paint is basic red polyurethane finish on pump, skid and trailer. (*Not on Driver) Total Package Weight with Fuel = 15,000 lbs.
Trailer:
Gooseneck style dual axle 14,000 lb. GAWR trailer, complete with: electric brakes &
coupler; DOT lighting package; 235/85 R16 LRF tires/wheels. Deck areas covered with safety
“Grip” surface.
Pump Detail:
Manufacturer
Series
Model
Fittings
Performance @
Priming
Patterson
MAA
12 x 8 x 20.3
Cast iron casting, Bronze trim,
SS packing sleeve
Shutoff 200 psi
4,000 gpm - 150 psi / 2,500 gpm - 175 psi
One 24 VDC Electric vane primer & reservoir
Driver Detail:
Manufacturer
Model
Power
Electrical System
Cooling System
*Paint
Caterpillar
3406-DITA
500 BHP @ 2100 rpm
24 VDC
Standard base unit Caterpillar yellow
Suction Manifold:
12” diameter flange-fitted header furnished with: four (4) 6” (M) NH inlet connections,
capped & one (1) 2.5” valved (F) NST swivel w/plug.
Discharge Manifold:
10” diameter flange-fitted header, furnished with: four (4) 5” storz discharge connections, capped, with gated discharge valves: (1) 2.5” (M)
valved discharge connections.
Control Panel:
Includes: start/stop switch, tachometer, oil pressure gauge, coolant temperature gauge, amp meter, vernier throttle, compound suction gauge,
discharge pressure gauge, fuel pressure gauge, primer valves & switches, hour meter.
Options:
(20’ each - 4 req’d) or (10’ each - 8 req’d)
6” NH “Light Weight” hard suction hoses
(20’ each - 4 req’d) or
(10’ each - 8 req’d)
6” Floating basket strainers (4 req’d)
Full skid cover
Add, 2.5” Discharge/Suction
4 Work Lights
Manual clutch between pump & driver
Four suction hose racks (passenger side only)
for use with 10’ hoses only
SS Suction/Discharge Manifolds
Automatic battery charger
Retractable awning over pump operator
6” NH hard suction hoses
PRODUCTS 409-745-3232
A2
120108
TRANSPORTABLE PUMPS
TRANSPORTABLE PUMPS
Dependapower DPGOU 6040 CAT-R
Goulds/Caterpillar 6,000 GPM
Description:
The Dependapower DPGOU 6040 CAT-R is a trailer mounted, diesel driven
horizontal split case centrifugal fire water pumping system. Nominal performance rating is 6,000 gpm @ 150 psi net (10’ lift). Designed to be moved from one location
to another without having to realign the pump coupling. Entire assembly is built on
skid base which also serves as a fuel tank. Also includes structural frame with lifting lugs
and work lights. Electric start with dual electric primers. Total Package Weight with Fuel
= 20,000 lbs.
a
Trailer:
Triple axle 24,000 lb. GAWR steel decked trailer, complete with; electric brakes and coupler, DOT lighting package; leveling jack with rear
stabilizer jacks; 235/85 R16 tires/wheels.
Pump Detail:
Manufacturer
Series
Model
Fittings
Performance @
Priming
Goulds
3409
10 x 14 x 20 L
Cast iron casting, Bronze trim
Shutoff 200 psi
6,000 gpm - 150 psi
4,000 gpm - 175 psi
Dual 24 VDC Electric
Driver Detail:
Manufacturer
Model
Power
Electrical System
Cooling System
Caterpillar
3412-DITA
750 BHP @ 1800 rpm
24 VDC
Suction Manifold:
14” diameter header, furnished with: six (6) 6” (M) NH inlet connections
- capped and one (1) 2.5” valved (F) NST swivel w/plug.
Discharge Manifold:
10” diameter header, furnished with: six (6) 5” Storz discharge connections,
capped, six (6) worm gear operated butterfly valves - 5”, two (2) 2.5” (M) auxiliary valved discharge connections - capped.
Control Panel:
Includes: start/stop switch, tachometer, oil pressure gauge, coolant temperature gauge, amp
meter, vernier throttle, compound suction gauge, discharge pressure gauge, fuel pressure gauge,
primer valves & switches, hour meter.
Options:
6” NH hard suction hoses (20’ each - 6 req’d) or (10’ each - 12 req’d)
PRODUCTS 409-745-3232
A3
120108
TRANSPORTABLE PUMPS
TRANSPORTABLE PUMPS
Lo-Pressure / Hi-Volume
Submersible Pump
N-Hancer Submersible Pump
Description:
S u b m e r s i bl e Pu m p
Trailer mounted diesel driven submersible pump. Originally designed
for agricultural service, now redesigned for utilization for the fire service
– industrial and municipal.
• Industrial uses – (1) de-inventory water flooded areas
in process areas, tank farms, etc. from flooded waterways or tropical events, (2) re-inventory
water to supply fire water from restricted inventory levels, (3) gain access to water supplies
otherwise not available, and (4) enhance pumping operations to
make existing centrifugal pumps more effective by reducing the
strain by pumping from draft.
• Municipal uses – (1) in optimal areas, supply
large volumes of water to municipal pumpers (either professional or volunteer departments) during large fire operations
requiring significant support, (2) improve water shuttling operations to maintain supply needs for insurance ratings for departments, and (3) support for areas affected by flooding.
Pump easily backs into any
available water source of at
least 2-foot depth.
Features:
Trailers are fitted with a 2” ball coupler, and can be pulled
over the road by a ¾-ton truck. Trailers can be spotted in place
(in a waterway) with same vehicle. Suggested logistical deployment would be via flatbed truck for long distances. The trailers
are road legal, but would need appropriate tags and serial numbers. Trailers are outfitted with lifting lugs in the event conditions would not permit placement via vehicle (pump and motor
weight is less than 6000 lbs). Visually accessible grease fittings.
In field testing the large N-Hancer pump provided 9000
gpm to the pump suction of a Williams 6000 pump (Patterson
package) and was demonstrated with a Ranger 3 nozzle and an
Ambassador monitor – results indicated a flow rate of 8,326
gpm at the monitors at 125 psi.
Visually accessible grease
fittings at the operator
panel
Adaptations:
Pumps are outfitted with a dual 12” Storz discharge
manifold, and include 2 sections of 50’, 12” hose with Storz
connections, and 2 distribution manifolds each with 12”
Storz inlet and 4, 6” Storz outlets —manifolds are constructed of stainless steel.
Pump Data: Small Pump
Pump Data: Large Pump
At 1000 RPM
Flow
At 1000 RPM
2000 gpm
3000 gpm
4000 gpm
Head (ft)
86
80
67
Head (ft)
Effy %
56
69
67
Effy %
60
64
40
HP (~)
78
88
100
HP (~)
120
145
176
PRODUCTS 409-745-3232
Flow
4000 gpm
6000 gpm
9000 gpm
71.5
61.5
32.5
A4
120108
TRANSPORTABLE PUMPS
TRANSPORTABLE PUMPS
Models Available (presently through WF&HC):
Small Pump
Discharge
Suction
Flow
10” pipe ...
Fitted with a single 12”
Storz discharge to reduce
friction & pressure loss
Large Pump
Discharge
Head (ft)
Power
• 160 hp Deutz diesel direct
drive
• 50 gallon fuel tank
• 6 hours of runtime
8” double suction
4000 gpm
70
Suction
Flow
Head (ft)
9000 gpm
50
16” pipe ...
10” double suction
Fitted with two (2) 12”
Storz connections at the
discharge manifold
PRODUCTS 409-745-3232
A5
Power
• 176 hp Deutz diesel direct
drive
• 50 gallon fuel tank
• 6 hours of runtime
120108

transportable pumps section index - Williams Fire and Hazard Control

Transcription

Similar documents

fixed foam storage and proportioning systems section index