66 66 Climbing Harness Selection Guidelines

Transcription

Climbing Harness Selection Guidelines
To start choosing a tree saddle, the first thing to do is decide your budget. Tree work is a gear-intensive endeavor, and you’ll want to get a saddle that meets your needs without paying for features you
may not use.
Entry-level
Professional Users
Deluxe Saddles
Landscapers or infrequent users can get away with a basic
saddle in the economy range. A saddle with a butt strap is
often a good choice for the occasional user, as it can be more
comfortable than the leg loop saddles used for more advanced
climbing. This type of saddle will typically be around $160.
Good choices are the Weaver and Buckingham economy lines.
Make no mistake, if you are a professional climber, buying
the right saddle is an investment in your productivity and
health. A saddle with good fit, support, and the features you
need for the climbing you will do can be found in the $240 $390 range. At this point, it is worth your time to do some
research on the features you want to have for the type of work
you will perform, as this gear will be used daily.
For high production or competition-level climbers, the
saddle is a second home. A deluxe saddle like the Ergovation,
Sequoia, or treeMOTION is highly recommended for this level of
tree climber, as the extra investment in the comfort features
of a saddle in this range will pay off in less strain, fatigue,
and soreness.
Sizing
Harness Contents
To get the best fit on your tree climbing harness,
we advise taking measurements in 3 places: waist,
D-to-D, and leg.
Waist measurement is taken normally just like
you would use for your pants size. If you take a
waist measurement, keep in mind that you will be
wearing your saddle over your work clothing.
D-to-D measurement is most important if you
are going to be spur climbing. Drop down 4” from
the top of each hipbone and measure the distance
around the back from hipbone.
Leg measurement is most important on saddles
that have separate leg loops.
treeMOTION67
Buckingham
Waist
D to D
Ergovation68
Spartan
68
Viking
69
Deluxe Series
70
Economy70
Tree Austria 3.2
Petzl
Leg
66
• • • • • • • • • Avao
Chest Harnesses
Sequoia
Kids’
71
72
72
73
76
Weaver
• Cougar
74
• Economy74
New Tribe Work
• Onyx
• ProGear II
New Tribe Rec
• • • • • 75
75
Yellow Jacket
Tengu
Twist
Basic w/ Ds
Tree Fox
76
76
76
76
76
Kids’
76
Order online: www.WesSpur.com
treeMOTION
by Teufelberger
SAD601 $509.95
The popular treeMOTION harness was improved in 2013. This
is still the popular, lightweight, and customizable harness folks
have come to expect, but with several key improvements; the
back padding has been expanded so that what was previously
sold as the Comfort Back Padding upgrade now comes
standard. On the back of the harness you’ll find a rated rescue
/ rear attachment ring. Finally, all elements of the upgraded
treeMOTION were tested at a total load of 260 lb., so you can
rest assured the treeMO is built for production climbing!
One size fits from
30” - 38” waists
Weighs 4.6 lb
Saddles and Harnesses
This totally customizable, ergonomic harness is one of the
most-talked about climbing saddles in the industry. Folks who
have tried the treeMOTION love it for the way it can be totally
customized by the user to a custom fit that provides pinchfree climbing. The unique construction of this saddle allows the
user to customize everything from the hang of the leg loops to
the position of gear loops for complete freedom of movement
and comfort. The saddle itself is lightweight and contours to
the body ergonomically with replaceable, washable padding.
The rope bridge is easy to replace with a knotted rope
without splicing or disassembling the saddle, and it’s easy to
install a micro pulley. The rigging plates where the bridge
connects can also be used as fixed attachment points. Features
quick-connect leg and waist buckles, plenty of slots for gear
rings, carabiners, or Caritools, plus two heavy-duty gear loops
in the back, a heavy-duty position for attaching a saw, and a
spot for a climber’s first aid pouch.
You may have to spend a little time customizing your
treeMOTION - once you do, you’ll have a harness that fits you
and your job like no other!
Accessories
Gear Loops
SAD603 $15.95
SuspendersSAD606
$79.95
Replacement Parts
Rope Bridge
SAD602 $18.95
Back Pad
SAD610 $34.99
Leg Padding Pair SAD605 $26.99
Comfort back padding now standard
These accessories are also compatible with the
treeMOTION S.light harness below.
Inspect your rope bridge and replace it as
you would any other piece of life-supporting
gear (such as a prusik).
treeMOTION S.light
by Teufelberger
S.lightSAD611
$374.95
The treeMOTION S.light is a sleeker version of the
treeMOTION harness that weighs even less and conforms to the
climber’s body for a truly unobtrusive harness. Lighter material
shaves weight and price off of the S.light, which is where it
gets its name (S.light stands for ‘Super Light’.)
One size fits from
30” - 38” waists
Weighs 3.95 lb
The streamlined nature of the treeMOTION S.light makes it
ideal for climbs where you will be doing repeated ascending
and descending and want to shave off as much weight as
possible.
Like the original treeMOTION, the S.light has a rope bridge
that is both easy to inspect and easy to replace. The rigging
plate Ds where the bridge attaches also open up additional
attachment possibilities. The S.light is a great choice for a
super-lightweight tree climbing harness.
Order by telephone: (800) 268-2141
67
Ergovation by Buckingham
Waist
D-to-D
SM
28” - 32”
22”
MD
32” - 36”
24”
LG
36” - 40”
26”
XL
40” - 44”
28”
Weighs 6.3 lb
SAD123 $524
The Ergovation will keep you climbing more comfortably,
longer. This saddle was made with expert advice to be the
most ergonomic tree saddle ever built. The Ergovation will
not only help you be your most productive each day, but
throughout your career.
Thick, Drilex-lined padding on back and legs, plus contoured
belt, make this a super-comfortable ride. The back padding is
replaceable, which means the saddle will also have a longer
service life. Plus, you can even slip an ice or heat pack in the
back - anyone who has started to feel the ache in the lower
back after long days of spur climbing will love this!
In addition, the Ergovation is fully customizable with
multiple seat and bridge options, and add-on fall protection
harness. Weighs 6 lb. 3 oz.
• • • • • • • Batten Seat
SAD126
Sigma SRT
SAD130
Rigid Leg Pads
SAD127
Fixed D Bridge
SAD131
Semi-Rigid Pads
SAD128
Floating Ds Bridge
SAD132
Fall Pro Harness
SAD410
Nylon Loops Bridge
SAD133
Gear Loops
SAD129
Nylon Loop Bridge
SAD136
Customizable lumbar support
Helps maintain optimal posture
Fully-modular design
Ergonomic back pad
Removable, washable padding
Decreased pressure on pelvis
Increased padding
Ergovation Add-ons and Parts
Batten Seat
Rigid Leg Pads
Semi-Rigid Leg Pads
Add-on Fall Pro Harness
Add-on Gear Loops
Sigma SRT Attachment
Bridge: Fixed Ds
Bridge: 2 Floating Ds
Bridge: Nylon Loops
Bridge: Single Nylon Loop
SAD126
SAD127
SAD128
SAD410
SAD129
SAD130
SAD131
SAD132
SAD133
SAD136
$107
$130
$59
$173
$39
$43
$67
$78
$65
$35
Ergolite Spartan
by Buckingham
Waist
D-to-D
SM
28” - 32”
22”
MD
32” - 36”
24”
LG
36” - 40”
26”
XL
40” - 44”
28”
Weighs 5.3 lb
SAD140 $399
Modeled after Buckingham’s popular Ergovation saddle,
the ErgoLite is constructed out of heavy-duty materials and
features a fully-adjustable waist, legs and suspension bridge.
This lightweight saddle weighs in at only 5.3 lb and features a
comfortable, breathable waist belt and leg loops, lightweight
aluminum work-positioning D rings, second set of D rings that
allow the bridge to articulate, quick-adjust strapping, 6 large
accessory loops, easily-replaceable bridge, and front buckle
closure that allows for easier on/off while wearing spikes.
• • • • Similar design to the Ergovation
Advanced padding
Fully-adjustable waist & legs
Easy-to-replace bridge
68
Viking by Buckingham
SAD124 $251
An affordable, well-padded leg-loop and rope-bridge saddle
from Buckingham, the people you trust the most to build rocksolid tree gear. The Viking has a simple, uncluttered design
with good geometry that transfers weight to the legs instead
of the hips and lower back.
Well-padded, with Drilex lining to dry faster and wick
moisture away, this saddle packs a lot of comfort and features at
an excellent value. The saddle has snaps in all the right places
for your saws & gear, and a carabiner loop on either side for a
large saw carabiner.
Waist
D-to-D
SM
28” - 32”
22”
MD
32” - 36”
24”
LG
36” - 40”
26”
XL
40” - 44”
28”
Weighs 5.3 lb
• • • • Saddles and Harnesses
We recommend the Viking to those who want a full-featured,
reliable work saddle at a great price. This is an excellent saddle
for tree care company employees, who are at their most efficient
and safest when working comfortably so that their full attention
is on the job. Simply great value for the price!
Warp Speed bridge
Thick, Drilex-lined padding
Dependable USA construction
Good for spur or rope climbing
Warp Speed Bridge
SM / MD Bridge
LG / XL Bridge
SAD114 $62
SAD115 $62
Replacement bridge for Viking and Glide series saddles.
Carabiner is for illustration purposes only; item is sold separately.
Ergo. Economy
by Buckingham
SAD137 $249
The Ergovation philosophy of improved working comfort
brings you a super-comfortable saddle at an affordable price.
Awesome padding, great fit, and tapered back support. While
this saddle does not have the replaceable padding, quickconnect buckles, rope bridge, etc. of the Original Ergovation, it
is still a super-comfortable ride that is well worth the upgrade
from a leather & canvas saddle. This is a highly-recommended,
professional saddle from the leading manufacturer of arborist
saddles.
Waist
D-to-D
SM
28” - 32”
22”
MD
32” - 36”
24”
LG
36” - 40”
26”
XL
40” - 44”
28”
Weighs 5 lb
• 2 floating Ds
• Advanced padding
• Individual leg loops
69
Deluxe Master
by Buckingham
Waist
D-to-D
SM
28” - 32”
22”
MD
32” - 36”
24”
LG
36” - 40”
26”
XL
40” - 44”
28”
Weighs 5.6 lb
SAD109 $340
One of our most popular work saddles, the Deluxe Master
is one of the most comfortable, functional, and rugged tree
work saddles around. Upgraded with additional padding in the
back and leg supports, more attachment points, grommeted
waist buckle, and quick-connect buckles on the leg straps. The
center D ring has been eliminated, shaving off extra weight
and giving the climber a choice of multiple attachment loops
for overhead suspension. The Deluxe Master is a great allaround work saddle that will stand up to years of heavy use.
Recommended.
The full line of Buckingham master and deluxe
series harnesses is available at WesSpur.com.
Buckingham Economy Line
These saddles may not have all the bells & whistles of newer
models, but they deliver rugged functionality at a great price.
Wide-back saddles have 5 1/2” back support with 1/4” thick
foam, lined with soft top-grain leather. Made in the USA.
Waist
D-to-D
SM
28” - 32”
22”
MD
32” - 36”
24”
LG
36” - 40”
26”
XL
40” - 44”
28”
Buckingham Tool
Suspenders
SAD122 $58
Buckingham suspenders help keep
the saddle in place when loaded with
equipment. A carabiner is required
to attach to the loop in back of most
saddles.
Not for fall-protection.
Weighs 6.2 lb
Wide-Back Split
Suspension
SAD102 $145
• Split suspension
• Wide back
Weighs 6.2 lb
Wide-Back Floating Dee
H-style retro harness attaches to the webbing straps in the
front of a Buckingham Deluxe-series saddle and to the loop
at the back with a carabiner (sold separately) to provide fallarrest capability. Padded yoke-style shoulder straps. Velcro
chest strap. Nylon dorsal attachment. Adjustable for height.
For Deluxe-series saddles only.
70
SAD104 $188
• Single floating D
• Wide back
SAD403 $68
Weighs 5 lb
Wide-Back 2 Floating Dee
SAD103 $157
Buckingham Retrofit
Fall Pro Harness
Weighs 6.3 lb
• Two floating Ds
• Wide back
Split-Suspension Saddle
SAD101 $131
Lightweight and economical. Back and seat
sections are constructed of 3” double-thick
cotton.
Not recommended
professional use.
Basic Fall Pro Harness
SM-LG
XXL
SAD407
$62
SAD407XXL $96
Simple fall pro harness with dorsal attachment and parachute
buckle across the chest. Can be worn underneath a saddle or by
itself for bucket truck work.
Chest in Inches
Height
34-36 38-40 42-44 46-48 50-54
5’ 4” - 5’ 7”
5’ 8” - 5’ 11”
6’ 0” - 6’ 3”
6’ 3” +
S
S
M
L
S
M
M
L
M
L
L
X
L
X
X
X
for
frequent
or
Buckyard
Decelerator Lanyard
4’ Buckyard
6’ Buckyard
FLI301
FLI302
$69
$72
Expands to 42”. Interior materials stretch to reduce the
arresting force to less than 900 lb. Two steel locking snaps.
X
XX
XX
XX
Tree Austria 3.2
Tree Austria
SAD559
$380
Waist
The Tree Austria 3.2 is the latest development in one of our
most popular climbing harnesses. Important developments are
the improved leg pads with ergonomically-designed shapes and
thicker padding, adjustable rise, and rated webbing loops on
the bridge shackles.
The Tree Austria 3.2 is fully-adjustable in the waist, leg loops,
and hip and leg straps. Quick-release snaps on the leg loops and
waist belts are easy to operate yet secure. The sliding bridge is
a sturdy webbing bridge with large aluminum ring.
MD
28” - 32”
LG
32” - 36”
XL
36” - 40”
Weighs 3.9 lb
Add-on fall protection harness, batten seat and replacement
parts are available.
Weighs about 3.9 lb.
Tree Austria 3.2 Leg Pads
Tree Austria 3.1 Leg Pads
Replacement Bridge
23cm
25cm
30cm
SAD530-1 $18
SAD530-2 $18
SAD530-3 $18
Replacement Shackle
Chest Harness
SAD526K $117
Batten Seat
With Clips
Seat Only
SAD525K $109
SAD525 $86
(Older models of the Tree Austria do not
require clips to mount the seat.)
All Sizes SAD531 $20
Shackle Thread Glue
3 ml
SAD532 $3.25
Petzl ASAP
ASAP w/OK Carabiner
ASAP Lock
20cm ASAP’sorber 40cm ASAP’sorber ASC137 ASC137-L
ASC138S ASC138L $230
$265
$40.95
$50.95
The Petzl ASAP is a popular fall-arresting rope brake. The ASAP travels
freely along the rope, and is engaged in case of a sudden movement from
a fall, slide, or uncontrolled descent. The ASAP Lock has the added benefit
of being able to be locked in place on the rope. Couple either with the
ASAP’sorber energy absorption lanyard for a shock-absorbing fall arrest
system. Both ASAPs can be installed midline. The Petzl ASAP (not the ASAP
Lock) is sold with an OK Tri-act carabiner. For use on ropes from 7/16” to
1/2” (10.5 mm to 13 mm).
ASAP Lock
ASAP
71
Avao Sit Fast
Waist
Leg
Size 1
28” - 43”
20” - 25”
Size 2
32” - 52”
24” - 30”
Weighs 2.5 lb
SAD225 $300
The Petzl Avao Sit harness features improved waist belt
padding, redesigned gear loops, slots for tool carriers or
carabiners, and a dorsal attachment point for a shoulder
harness. This harness is designed to increase comfort and
mobility while working, while being as lightweight and sleek as
possible. The ‘Fast’ in the title refers to the quick-connect buckles on
the leg straps, which make getting into and out of this harness
quick and means that you don’t have to fine-tune the fitting
every time you climb.
Petzl Avao Sit
SAD224 $270
The Petzl Avao Sit is also available without
the quick-connect buckles, as a special order
item. While this version is slightly cheaper, it
is more a hassle to get in and out of.
Small Large Caritool
CAR901 $8.95
CAR311 $18.95
Lightweight tool holder to organize gear
on your harness. Tools can be arranged and
accessed with one hand. Attaches to the
webbing of a harness waist belt, and the clip
on the inside of the tool holder helps stabilize
its position. Includes a small hole at the top
for attaching a keeper cord, to help prevent
dropping critical gear.
Small holds up to 5 kg (11 lb.)
Chest’Air
SAD215 $123
This chest harness connects with a carabiner
(sold separately) to the bridge of the Avao or
Sequoia to add fall-arrest capability to those
harnesses. This adjustable harness fits a wide
range of users with doubleback buckles on
both the shoulder and chest straps. Running
the strap over the upper back provides a
more comfortable distribution of weight. The
sternal attachment for fall-arrest does not
have a bulky D ring for a lighter, less obtrusive
harness. Weighs 495 g.
Large holds up to 15 kg (33 lb.)
Top
Torse
SAD408 $108
SAD405 $23.95
Works with Petzl Avao Sit saddle to transfer
weight carried on saddle to shoulder straps. A
very comfortable way to support the weight
of gear carried on the harness, as well as
giving you a single chest attachment point.
Connects to the rear buckle of an Avao Sit or
Sequoia SRT harness. Can be used with Croll
chest ascender. Fall-protection rated on SIT
harness only.
The Torse is an minimalist harness for
correct positioning of the Croll chest ascender.
Connects to the back of a harness with a
carabiner (sold separately). Rapid adjustment
enabled using the double-back buckle.
This is a great way to add a chest ascender
to your SRT climbing setup which won’t take
up much space or add much weight, and is
also excellent for tending Hybrid SRT devices.
Secur
SAD212 $36.95
Top Croll
SAD409 $167
Top chest harness with integrated Croll rope
grab. Features a single attachment point on
the chest. Connects to the rear buckle of a n
Avao Sit and transfers weight carried on the
waist to the shoulder straps. With Avao Sit
harness certified to: CE EN361, CE EN12841
type B. Weighs 880 g.
Shoulder straps for positioning the Croll
ascender can be added to Sequoia saddles.
Attaches with a girth hitch to the rear ring
of the harness. Easily adjusted with the
DoubleBack buckle. Weighs 120 g.
Voltige
SAD209 $57.95
This fully-adjustable “figure 8” style chest
harness helps keep climbers upright while
climbing. Must always be used with a sit
harness.
72
Sequoia
SequoiaSAD210 $415
Waist
Leg
Size 1
28” - 43”
20” - 25”
Size 2
32” - 52”
24” - 30”
Replacement Bridges:
25cm SAD228-25 $22.95
30cm SAD228-30 $22.95
35cm SAD228-35 $22.95
Petzl’s top-selling professional arborist harness has been
redesigned to fit better and work harder in the tree tops. The
Sequoia is still lightweight and low profile, but with serious
upgrades in adjustability and comfort.
Weighs 2.9 lb
The new Sequoia features a semi-rigid, wide waistbelt with
an improved fit and perforated foam padding for breathable
support. The foam on the leg loops can be adjusted for support
where you want it. Both belt and leg loops are adjustable and
equipped with FAST buckles so that once you have it dialed
in, it’s easy to clip in and climb without needing to fiddle with
adjusting the fit. The Sequoia features a replaceable rope bridge which
connects to the rings that bring together harness and leg loops.
These same rings provide support for the optional Sequoia Seat,
which provides a wide, comfortable platform for suspension
work.
The Sequoia has plenty of capability for carrying and
organizing your tools, with 7 equipment loops with nylon
sheaths, 5 retainers where a Caritool can be clipped, a slot on
each side for a saw carabiner, and elastic on the back for an
emergency compress.
The Sequoia has always been a popular harness for those
who liked the low-profile, lightweight approach to a pro harness,
and with the redesigned padding and option for suspenders, it’s
even better.
Sequoia SRT
SAD211 $445
Shoulder Straps
The Sequoia SRT has all the benefits of the Sequoia’s new
design, with the buckle in back and webbing loop in front for
the attachment of the Petzl Secur with a Croll chest ascender.
Combined with the Croll and Secur, the Sequoia SRT will make
an excellent harness for long single-rope ascents, keeping the
climber upright and climbing with maximum efficiency and
comfort.
SAD216
$67.95
Padded shoulder straps for the
Sequoia SRT take the weight off the hips
and redistribute it for improved comfort
when climbing.
Note: Only the Sequoia SRT has
attachments for the shoulder straps.
The Sequoia Shoulder Straps are also available without any
chest ascender. With all of the gear slots on this harness,
the ability to add padded suspenders is a boon. Suspenders
help support the weight of tools and keep your Sequoia riding
correctly, even when loaded with a saw and other gear.
For replacement parts and sizing, see the listing for the
Sequoia above.
SAD229
Bridge Adjust
$74.95
Adjustable attachment bridge for Sequoia and Sequoia SRT
harnesses allows quick and precise adjustment of the position
of progression tools installed on the bridge.
Length adjustment is very quick and easy thanks to the
adjust rope clamp, which releases with a simple turn and
handles easily due to its ergonomic shape.
The adjustable attachment bridge allows improved
ergonomics when returning to the trunk. The space created
between the Zigzag and the harness allows pulling with both
hands on the free end of the rope.
Ring Open
SAD219 $19.95
For the first time, the opening rings which connect the Sequoia
bridge and leg loops are available for individual purchase.
Suspension Rings
Small SAD221S
Large SAD221L
$15.95
$15.95
Aluminum rings can be added to the bridge of the Sequoia for
better lateral mobility.
SAD213
Sequoia Seat
$123
Wide, easily-adjustable seat connects to the harness rings on
the Sequoia or Sequoia SRT. Easily moved to the back when not
in use so that it does not hinder climbing.
73
Weighs 6.5 lb
Weighs 6.8 lb
Cougar
with Webbing Bridge
Cougar with Leg Loops
SAD316 $249
Cougar with Batten Seat
SAD317 $279
Replacement Bridge
SAD318 $27
Add-on Batten Seat
SAD314 $85
The webbing bridge has a black core which contrasts sharply
with the orange outer layer. This makes the bridge on the
Cougar easy to visually inspect.
The Cougar features excellent padding, a full complement
of gear loops, rings, and snaps, and the solid construction
climbers have come to expect from the Weaver Cougar.
Weighs 5.5 lb
Rope Bridge Harness
Extra-Wide Back
by Weaver Leather
Harness with Leg Loops SAD320 $320
Harness with Batten Seat SAD321 $378
Weaver’s latest harness features a double rope suspension
bridge for great mobility and easy replacement. The bridge has
a white core to make spotting wear and replacing the bridge
easy. The rigging plates offer multiple suspension points.
The Weaver rope bridge saddle really shines in the foamlined back pad and the many gear rings, snaps, and loops
,allowing you to rack your gear exactly how you like.
Weaver Harness
SAD319 $135
New affordable sit-sling harness from Weaver leather. This
entry-level harness has an enhanced, extra-wide back pad
which extends further forward on hips, giving you improved
comfort and support.
The extra-wide 7” back is constructed from memory foam
that conforms to the back, reduces pressure points, wicks
away moisture, and does not retain heat for more comfortable
climbing.
Available with padded leg loops or batten seat.
Also available with a batten seat.
Inspect your webbing bridge and replace
it as you would any other piece of lifesupporting gear (such as a prusik).
Weaver Wide-Back Saddles
Leg Loop Saddles
A. Split Suspension B. 2 Floating D
A
B
SAD303 $169
SAD307 $185
Butt Strap Saddles
C. Split Suspension D. 2 Floating D
SAD304 $159
SAD309 $169
E. Split Suspension SAD315 $170
Waist
D-to-D
SM
30” - 34”
20”
MD
34” - 40”
22”
LG
40” - 44”
24”
XL
44” - 48”
26”
Leather-lined Batten Seat
Weaver wide-back saddles are available either with padded
leg loops, a 3” wide butt strap, or a full batten seat. Leg
loops provide greater mobility, while the straps and seat are
more comfortable for long periods leaning in the belt. Both
feature a 6” wide foam-filled back support that is leather-lined
for comfort, and grommeted leg and waist belts. Back has five
nylon loops that can hold up to 15 lb. and two chrome brass
snaps to keep tools at hand. These are rugged & affordable
saddles.
C
D
E
Weaver wide-back saddles weigh about 6 lb.
Weaver saddles are made in the USA.
Weaver Leather
Saddle Size Chart
All Weaver Leather harnesses use the following size chart.
74
Waist
D-to-D
SM
30” - 34”
20”
MD
34” - 40”
22”
LG
40” - 44”
24”
XL
44” - 48”
26”
Weaver tree climbing saddles are designed for maximum
comfort and long wear, starting with the highest quality
materials and craftsmanship. The Amish craftspeople of Ohio
expertly craft each saddle; lock-stitching each seam and boxstitching stress points to meet or exceed ANSI #A10.14 criteria
for safety harnesses. Each leg strap is carefully positioned
on the seat strap for optimum comfort. Weaver’s dedicated
craftspeople carefully hand-set each copper rivet with leather
washers to help reduce wear to nylon webbing and maximize
the life of the saddle. Leg straps are also precisely lockstitched to the nylon-reinforced cotton webbing seat strap. All
Weaver tree saddles are made in the USA.
Weaver Saddle
Suspenders
SAD301
$21
Removable, adjustable 2” nylon
suspenders help distribute the weight
of your gear. Features nickel-plated
snaps and sliders for attachment and
adjustment. Attaches to small Ds
on select Weaver saddles, including
SAD304, SAD306, SAD307, and SAD308.
Not for fall arrest!
Weaver Leather saddles are hand-crafted for durability,
comfort, and practical climbing. Weaver saddles feature
improved basic saddle design, such as more grommets on the
waist buckle for a tighter fit and adding extra gear loops to the
back of every saddle.
Onyx
Webbing Bridge
Onyx
Rope Bridge Onyx
New Tribe Work Saddle
Waist
Rope Bridge SAD549 $438
Webbing Bridge SAD552 $424
New Tribe’s Onyx takes a new approach to a professional
arborist harness. New Tribe has built pro and recreation tree
climbing harnesses for decades, and that experience has
culminated in the Onyx.
Size 1
26” - 37”
Size 2
35” - 46”
Weighs 4.8 lb
The Onyx is a compact harness that provides support by
improving the construction and design of the harness so
the weight is distributed more evenly, thanks to the unique
webbing pattern on the leg loops. The hang point on the Onyx
is fully-adjustable, with adjustment on the waist to rigging
plates, rigging plates to leg loops, and from the back of the
harness to the leg loops. The harness provides comfort without
added bulk.
WesSpur stocks the Onyx with rigging plates and rope bridge,
and the harness is also available with a webbing bridge.
Conversion kits are available to convert the harness between
the two.
A Niceguydave favorite.
Add-on Leg Pads
Bridge Conversion Kits
Webbing Bridge Kit Rope Bridge Kit
SAD555 $27
SAD553 $48
SAD554 $105
These pads Velcro into the Onyx leg pads for
those who want more cushioned support.
Conversion kits for switching the bridge on the Onyx.
Inspect your webbing bridge and replace
it as you would any other piece of lifesupporting gear (such as a prusik).
ProGear II
New Tribe Work Saddle
Waist
Leg
SAD537 $272
SM
26” - 32”
18” -21”
Big side D rings and a floating roller D on the leg strap bridge.
Fixed front tie-in point that closes with a large pear screw link.
The leg pads feature extended cushioning at the inner thigh for
superior support and comfort. Double-density foam padding on
both belt and leg straps provide support, load distribution, and
long wear. Quick-connect buckles on the adjustable leg straps.
The belt pad is 6” wide at the back, tapering to 4” at the front.
This saddle is loaded for tool carrying and built for comfort.
MD
33” - 35”
21” - 24”
LG
36” - 40”
24” - 27”
XL
41” - 45”
27” - 29”
Weighs 4.75 lb
Climb Buckets
Zippered
Open-top
BAG221 $28
BAG220 $25
Zippered Climb Bucket measures 6” x 10” x 2
1/2” & attaches with Velcro and a steel snap.
Open-top Climb Bucket measures 8” x 11” x 2”,
and attaches with ring.
New Tribe Suspender
SAD534
$18
New Tribe’s work suspender is a different way
to support the additional weight of saws and
tools carried on the saddle. This sash-style single
suspender for use on the Pro Gear II or Nikosi
goes over 1 shoulder, is adjustable for a snug and
slack-free fit, and padded. Two can be worn as
an x-style suspender set for even more support.
75
New Tribe Recreational Climbing Saddles
Weighs 2.75 lb
Yellow Jacket
Weighs 2 .8 lb
Tengu
SAD538 $185
SAD515 $211
Superior comfort without any cushioning pads! Built
with a diamond grid of webbing that distributes the load so
effectively that you won’t miss the pads and you’ll appreciate
the light weight. An excellent choice for a packable rec
climbing harness.
Named for Tim “Tengu” Kovar who wanted a lightweight
saddle that was quiet and comfortable. The Tengu fits the bill
and is a great harness for climbers who want to disappear into
their surroundings and still be ready for complex rigging and
rescue maneuvers. Weighs about 3 lb.
Weighs 2.75 lb
SAD543 $185
Tree Fox
Kids’ Harnesses
A. New Tribe Kids’ Twist
B. New Tribe Kids’ Basic D
C. Petzl Ouistiti
D. Petzl Simba
SAD542
SAD547
SAD402
SAD406
S-L
XL
“Twist”
SAD541
SAD541X
$145
$159
One size fits SM-LG users up to 225 lb with comfortable
leg loops making this the perfect choice for rec climbing
groups, adventure climbing hosts, etc. One snap hook, two
carabiner loops, accessory ring, and two slots for gear bags and
carabiners provide plenty of places to carry gear.
Weighs 2.4 lb
Weighs 2 lb
Basic w/ Side Ds
Disappear into your surroundings in comfort with the Tree
Fox. Perfect for photographers, wildlife enthusiasts, hunters,
and anyone who wants to climb without disturbing their
surroundings. It has the sleek design of the Yellow Jacket with
camo coloring and fabric sleeve on the delta link to stay silent.
Weighs 2 lb
Champion
SAD546 $175
SAD558 $185
The classic New Tribe rec climbing saddle with the added
functionality of webbing side D rings for positioning in
the canopy. The New Tribe Basic is a great saddle for rec
climbers who don’t have need of work positioning Ds. Wide,
comfortable leg padding, light weight, and low profile make it
popular for rec climbers.
The New Tribe Champion is a relative of the Twist above,
enhanced with soft side Ds and made in a camo pattern. This
saddle is the Champion of recreational tree saddles. It fits the
largest range of people, has the largest belt pad and leg pads,
and rivals all others in adjustability, features and comfort.
A
B
C
D
$105
$145
$54.95
$59.95
These harness will let you take small climbers safely to new
heights, and share the adventure of tree climbing.
The Kids’ Twist adds adjustability to the safety and comfort
features that New Tribe has built into their rec saddles for
years. This saddle is one-size-fits-all for children of all ages.
The Kids’ Basic D has soft side Ds for kids who are ready to
learn more advanced climbing maneuvers on rope and lanyard.
The Ouistiti is a full-body harness for kids 4 to 9 years old
& under 66 lb. Full-body design is safer for small bodies. Two
DoubleBack buckles adjust in the back to keep them out of
reach of the wearer.
The Simba adjustable harness is for kids 5 to 10 years under
88 lb. Because small children do not have well-defined hips for
a waist belt, the full-body design is necessary for safety.
Latex Palm Gloves
Each
Dozen
CLO614 $2.95
$32
Made from cotton and polyester fibers with a latex-coated
palm - great grip on ropes! S, M, L, XL
76
XS Kid-Sized Gloves
CLO638 $3.5
Extra-small sized Atlas Grip nylon-palm gloves protect the
hands of small climbers in the trees.
New Tribe Treeboat
CLI906 $299
Rugged portable bed is 6’6” long, 30” wide (41” at center),
& made of tough nylon canvas. Shrouds are 4,000 lb. test 1”
tubular nylon webbing running full-length along both sides of
the boat, ending with a buckle at each corner. Comes with
35’ more webbing, in 15’ and 20’ lengths. Corners bear 2,500
lb. test rolled aluminum rings that help stop rain water from
wicking down the shrouds, and are also attachment points
for creative rigging in treetop hammocking. Slip-in fiberglass
battens at each end brace the Treeboat out to its full width.
Comes with its own Haul Bag. Weighs 4 lb. 10 oz.
Treeboat Hideaway Hammock
CLI910 $379
The Treeboat is the most comfortable way to spend a night
in the treetops, and now the Treeboat Hideaway gives you a
larger, more stable platform for sleeping in the canopy. The
Treeboat Hideaway has a 12” longer deck which will sleep taller
people and create a flatter bed which is more comfortable for
everyone. It won’t tip, sway, or collapse around the sleeper,
and is roomy enough to sleep two. The Hideaway is strong and
stable like the classic Treeboat, but comes in a natural camo
which blends right into the natural environment.
90” long, 30” wide, braced with sturdy battens, supported by
2-4 supports with corner rings for creative rigging, and will accept
add-ons for extra shelter in sun, wind, rain, and against bugs.
Treeboat Accessories
Cozy Insulation
Outrigger Bag
Accessory Line
CLI934 $133
CLI935 $36
CLI936 $21
Outrigger Bag stores necessary items within easy reach, with
a top flap to secure them and keep out the elements.
Accessory lines are tubular webbing with sewn eye one end.
Sold in pairs - one at 6.5’ & one 11’ strap. Useful for increasing
your rigging options for the Treeboat. Weigh .5 lb per pair. Order by telephone: (800) 268-2141
77
Chainsaw Lanyards
Our most popular saw lanyards can quickly be changed to hang at their full 50” length or
shortened to hang right at hip level. Available with a snap, ring, or soft loop at the lead end, and
with or without bungee construction.
Made from 1” nylon webbing.
Bungee 2-in-1 Saw Straps
Swivel Snap
Ring
Soft Loop
STR108 $19.5
STR114 $15
STR115 $15
50” 2-in-1 Saw Straps
Swivel Snap
Ring
Soft Loop
STR112 $12
STR111 $12
STR110 $12
Yellow with ring
Black with snap
Antishock Tool Lanyards
by Teufelberger
w/ Ring
w/ Carabiner
STR116 $49.95
STR117 $64.95
Break-Away Saw Straps
This Antishock tool lanyard protects the
climber in the case that the climber’s saw
becomes hung up in a falling branch or top; a
tear-away webbing pack activates if 450 to 500
lb of force is applied to the saw. The webbing
in the pack deploys, but it does not tear away
completely. This means that you won’t watch
your saw plummet to the ground if it is only
momentarily caught up, and the force on the
climber is greatly reduced.
50” Yellow w/ RingSTR101 $25
46” Black w/ Snap STR102 $26
Bungee lanyard breaks away at 250 lb. shock
load. Designed to prevent the climber from
being carried out of the tree by a falling load
snagging on the chain saw. NOT for chainsaws
over 15 lb.
If the extra distance provided by the initial
deployment of the tear-away webbing does
not free the saw, the webbing will tear open
completely after 27.5” and the saw will detach
from the climber, preventing further injury from
the stuck saw applying force to the user through
the harness.
Israeli Emergency
Compression Bandage Kit
Bandage & Pouch SAF507K $26
Bandage Only
SAF507 $8
This is a first-aid treatment device for staunching blood flow
from traumatic wounds. A true compression bandage, used by
medics and first responders around the world.
Comes in custom-made cordura pouch which has a Velcro
close that can be opened one-handed in emergencies. Included
Malice clips can be used to attach to any gear attachment point
on a saddle. Specify vertical or horizontal mount.
78
Soft Loop Saw Strap
42” Strap
STR109
Tool Straps
8” Nylon Strap w/ Ring
12” Nylon Strap w/ Ring 12” Nylon Strap w/ Snap 2” Nybuck Tool Strap
3” x 3/8” Bull Ring
STR118 $19
These rings are borrowed from agriculture to use on the
handles of large saws to provide an easy point to hang them
on the saddle. 3/8” stock ring splits open and secures with
a screw. 3” outside diameter, 2 1/4” inside diameter. Weighs
.3 lb.
Not for climbing!
STR105
STR106
STR107
SAD902
$7
$5.5
$6
$7.25
$8
Malice Clips
Short (4” closed) HAR909 $1.5
Long (6” closed) HAR910 $2
Malice Clips® are heavy-duty, reusable connecting clips
that can be used to attach gear pouches to MOLLE/PALSstyle equipment or webbing on saddles, gear bags, etc. Once
properly closed, the clip will not open until it is disengaged
by the user using a flat tipped object such as a knife or
screwdriver.
Saddle Pouches
DMM Tool Bag
BAG243 $29.95
BAG244 $34.95
The new DMM Tool Bags are designed for climbers to have
easy access to their critical tools. Easy-opening top and semirigid ‘Equal D’ cylinder shape make it simple in use. Multiple
clipping and racking options help keep dropped object
potential to a minimum.
Buckingham Ditty Pouches
Bag with Ring Bag with Clips
BAG215 $27
BAG216 $29
9” x 10” x 3”. Elastic opening keeps out debris and keeps
gear in, while still allowing quick access.
Climb Bucket
Zippered Open
BAG221 $28
BAG220
$25
The New Tribe Zippered Climb Bucket snaps securely into
the saddle belt webbing and stays upright while climbing. Rigid
webbing attachment strap secures with Velcro and a steel
snap. The open pouch with ring makes a great, easy-to-access
lanyard pouch.
4 liter - 8.25” tall.
Zippered: 6” x 10” x 2 1/2”.
6 liter - 12.20” tall.
Open: 8” x 11” x 2”.
Small Large
Petzl Toolbag
BAG247
BAG248
$40.95
$59.95
Petzl’s Toolbags are heavy-duty pouches ideal for storing small
or large tools, lanyards, cabling hardware, and so forth. Attaches
to the harness easily with a carabiner ring in the center. Each bag
features a wide webbing reinforcement at the top, and a heavyduty synthetic bottom. Each bag closes with a cordlock cinch, so
you won’t lose anything on your climb. The large pouch has two
zippers which can be drawn down to extend the volume of the
pouch for larger tools. Small fits 2.5 liters, large fits twice as
much - 5 liters.
Weaver Ditty Pouch
BAG223 $15
9” x 8” x 5”. Elastic top helps keep branches & debris out &
tools in. 3 clips on back. Made in China.
New Tribe Line Mug
Black
Red
Olive
• • • • BAG134
$20
BAG135
$20
BAG136
$20
5 3/4” tall x 4 1/2” round
Plastic swivel snap, D-ring
Drawstring close
Made in USA.
Lanyard sold separately.
Two-Pocket Pouch
Lanyard Pouch
Accessory Pouch
BAG214 $9
BAG234 $66
BAG110 $14
8” x 6 1/2” x 2”. Black canvas, rubber lined pockets, great
for bolts, knives, carabiners, etc. Loop on back slides over belt
to attach.
Heavy-duty bag easily holds 35’ lanyards or a flipline kit,
sling & block, etc. Attaches anywhere with 2 Malice clips
(included). 8.5” x 6.5” x 4” The best pouch around! USA.
6 3/4” tall x 5 1/4” round bag with drawstring close, side
handle, and steel ring. Color may vary (available by request in
red, blue, yellow, and orange). Made in USA.
79
4 liter
6 liter
Handled Ascenders
Handled ascenders improve ease of
climbing by giving you a large handle
to hold and allowing the device to get
a purchase on the rope rather than
having to grip with your hand. This
reduces the strength needed to grip
the rope, and lets you have more
endurance left to climb. Ascenders
move freely up the rope but the cam is
engaged when weighted, making these
devices useful for ascent only.
There are single and doublehandled ascenders available, and even
double-cammed ascenders for use on
doubled rope. The most popular hand
ascenders are compact, single-handled
ascenders which are easily stowed once
you’ve reached your desired height and
are ready to work the tree or descend.
A hand ascender is a key component
of any SRT rope walker system (see
page 64) when used with a foot loop
and foot ascender.
Petzl Ascension
Left Hand
Right Hand
ASC124-L
ASC124-R
$81.95
$81.95
Our most popular handled ascender has been redesigned now lighter and even better fit for the hand! The ergonomic
design of the handle makes them nicer to use on long climbs.
Toothed cam is easily engaged with a thumb lever. Two
holes of different sizes provide attachment points for slings.
Lightweight aluminum construction. 8mm - 13mm rope
capacity. Sold individually.
CT Quick UP
LeftASC183-L
RightASC183-R
$65
$65
Ergonomic, ultra-light hand ascender from Climbing Technology.
Rope diameter: 8 -13 mm (up to 1/2”). Weight: 7.6 oz (215 g).
CMI Expedition
Pair
ASC146
LeftASC147-L
RightASC147-R
$125
$70.5
$70.5
Durable ascender with a more comfortable handle. Like
all CMI products, features a lifetime wear-out guarantee on
the cams. XL hand grip with holes for attaching slings or foot
straps. Toothed cam. 1/2” capacity.
80
CAMP Pilot
LeftASC191-L
RightASC191-R
$69.95
$69.95
Lightweight ascender with molded grip and cam which can be
easily locked open or closed with the thumb. Rope diameter: 8
-13 mm (up to 1/2”). Weight: 7.4 oz (210 g).
CMI Ultrascenders
ASC109 $134.25
High-strength, corrosion-resistant steel ascenders. Lifetime
wear guarantee on the toothed cams. Twin holes for attaching
foot loops. 1/2” capacity. Sold as a pair only.
Petzl Basic
ASC118 $69.95
Improved design of the Basic makes this a compact
replacement for a handled ascender. Wide bottom slot accepts
multiple slings/carabiners and ergonomic shape fits easily in
the palm. Thanks to this ergonomic shape, the Basic can easily
be used in place of a handled ascender. 7/16” max rope size.
ISC Professional
LeftASC194-L
RightASC194-R
$95
$95
Coned (rather than spiked) cam faces reduce rope wear.
Lightweight, comfortable ascender for professional users. Rope
diameter: 9 -13 mm (up to 1/2”). Weight: 12.3 oz (350 g).
Kong Futura
LeftASC166-L
RightASC166-R
$82.5
$82.5
Lightweight, with an ergonomic grip design, this hand
ascender offers great functionality and takes up minimal room
in your gear bag. 1/2” rope capacity. Weighs 4.8 oz. Sold
individually.
Double-Handled Ascenders
Double-handed ascenders can be be used in the same manner as single-handled ascenders, but
also offer advanced uses on doubled line. Either way, with two handles the user is afforded a
more comfortable, powerful grip.
Petzl Ascentree
Kong Trender
ASC149 $215
ASC158 $186
Dual ascender with angled handles for faster and more
comfortable climbing. Cams are easy to engage and have
plastic covers to keep out twigs, etc. and prevent jams. 1/2”
capacity.
Ascentree will accept 1 or 2 legs of rope up to 13 mm (1/2”).
Holes in the frame above each cam will accept carabiners for
backup prusiks or carabiners to trap the rope.
Kong’s double ascender designed specifically for arborists.
Cams protected from accidental dislodging or intrusion of
debris. For doubled rope up 1/2”. Toothed cam.
New version in 2015 is both lighter and more ergonomic!
Foot Straps
Mini Frog Tether
Adjustable foot straps attach to the lower holes in single or double hand ascenders.
CMI Ascender Slings
Yates Speed Stirrup
CLI504
$26
WesSpur’s Mini Frog kit based on the
original design of the MicroFrog by Joe Harris
in Australia. This simple climbing system
simplifies the tending of all ascenders in this
rope walker system - hand, chest, and foot. Ascender Foot Straps
Petzl Foot Cord
Daisy Chain
ASC132 $73
LeftASC172
$29.5
RightASC171
$29.5
ASC112 $29.95
ASC177 $38.95
54”CLI921
$24
Two heavy-duty stitched nylon
ascender slings. One sling has
multiple attachments and loops
on each end; the other has
multiple attachment points and
twin footholds. Perfect for a Texas
system.
Fully-adjustable. Simple, clean
design dramatically reduces bulk of
traditional etriers. 4” wide, heavyduty vinyl steps. Fully-extended
stirrup measures 6’ long. Sold
individually.
Reinforced nylon webbing strap
attaches to an ascender with a
quick link (included). These make
a great addition to an ascender
climbing system. Fully-adjustable.
Sold individually.
A more compact, lightweight,
adjustable foot loop, with a
reinforced webbing step. Weighs 45
grams (1.6 oz). The minimal design
and easy adjustment will make this
a favorite for long SRT climbs. Sold
individually.
Durable nylon webbing with
heavy-duty stitching to form
multiple attachment loops. Great
for racking your gear or for use as an
adjustable tether for SRT climbing.
Sold individually.
81
Hardware
CT Quick’Arbor
ASC189 $180
Foot Ascenders
Foot ascenders put a cam on the climber’s instep, which allows the climber to slide the
ascender up the rope, then stand on that foot and straighten their body. Foot ascenders let the
climber use the larger muscles in the legs to advance their weight up the line, making them a
tool that can dramatically improve the ease of ascent.
Like other cammed ascenders, a foot ascender is only helpful as the climber ascends the line,
and will have to be disengaged to work the tree or descend. Some climbers prefer to remove
the foot ascender once in the canopy, while others will simply disengage the foot ascender and
continue to wear it.
Foot ascenders are a key component of a Frog style SRT system (see page 64) and can also be
used when climbing DdRT to make ascending much easier.
A Niceguydave favorite.
Left
Right
Turbo Foot Ascender
ASC190-L
ASC190-R
$74
$74
Rollers opposite the tooth cam increase ascending efficiency and reduce wear on your climbing
lines and the ascender. The straps on the Turbo Foot are easy to adjust and reinforced on the
step. Available right or left. Fits 8mm-13mm rope (up to 1/2”). Weighs 4.8 oz.
Quick Step Ascender
LeftASC186-L
RightASC185-R
$74
$74
An easy-to-install foot ascender with fully-adjustable
webbing reinforced on the bottom with tubular webbing. The
Quick Step is balanced to avoid twisting. Can be removed from
the line with a simple backwards motion. Aluminum body, 1/2”
capacity. Mid-size between Pantin & CMI. Weighs 6.5 oz.
Pantin Foot Ascender
LeftASC123-L
RightASC123-R
$89.95
$89.95
Petzl’s Pantin is light and compact, and it is easy to detach
the toothed cam from the line. Many climbers leave it on
for the entirety of the climb. This saves time detaching and
stowing gear which may be needed with bulkier foot ascenders.
Weighs only 2.8 oz.
CMI Foot Ascender
LeftASC114-L
RightASC114-R
$64.5
$64.5
Rope climbing is made easier by the CMI Foot Ascender.
This ascender is larger than some others. CMI Foot Ascender is
designed with a catch to keep it engaged on the rope. Perfect
for users who have trouble with other foot ascenders kicking
off the line. Aluminum body, 1/2” capacity. Weighs 11.2 oz.
Spikescender
Left
ASC151-L $158
Right
ASC151-R $158
Spacer ASC151-S $9.95
The new Spikescender from Kiwi Klimbers is a device with
a toothed cam that bolts onto your Gecko or Distel spurs,
allowing you to tend the slack in your climbing system with
your foot.
This is a great time-saver for large removals
where it makes more sense to enter on ropes, then transfer to
spurs for chunking it down. Also available are spacers for the
opposite side, for those who want their spurs to be offset the
same amount on each side.
Works with ropes from 11-12.7mm, designed to work best on
double-braid 24-strands.
Only fits Gecko or Distel climbers!
Spikescender
Spacer
82
Chest Ascenders
Chest ascenders are used primarily in SRT climbing systems to keep the climber in a more
upright position. This makes ascending more efficient and reduces fatigue in the core muscles.
Chest ascenders are used with a chest harness (see page 72).
CAMP Turbo
8-13mmASC192
$74
$139
$50
The PMI Chest Plate and Roller mounts on a chest harness
(sold separately) to provide an easy way to keep the climber
upright with less effort. The all metal roller incorporates
a pivoting gate that swivels open or locks closed. This chest
roller is ideal for long ascents where the aid in maintaining a
comfortable posture will pay off.
Petzl Croll
8-11mm ASC119
11-13mmASC119-L
$68.95
$68.95
When used with a chest harness, the croll keeps you upright
and well-positioned. Lays flat on the chest and can be easily
installed on the line one-handed. Safety catch keeps rope
captured.
Knee Ascenders
Knee ascenders place an ascender at knee height. A foot loop is attached to the bottom and a
bungee tether tends the ascender. Pairing a knee ascender with a foot ascender on your opposite
side makes for a very efficient and quick ascension system.
HAAS Ascent System
Regular CLI520-R
Long
CLI520-L
Beranek Rope Walker
$150
$150
CLI345
The HAAS Ascent System uses a bungee strap to tend an
ascender knee height with an adjustable foot loop attached.
Combined with a foot ascender on your dominant side, you can
climb quickly and easily in single rope or doubled rope systems.
Many climbers prefer this method of ascent to a traditional
rope walker, as the HAAS makes climbing more intuitive and
easier to coordinate.
Will work in DdRT, SRT rope walkers, and racing rigs using
a chest roller.
The HAAS works with ropes up to 13mm (1/2”) in diameter.
Available in a “long” size with a longer foot strap. Both versions
are adjustable in length. If the length from the arch of your
foot to the bottom of your hitch is 37” or longer, you will
want the long HAAS. If this distance is 36” or shorter, then the
regular will work better.
HAAS inventor Michael Frankhauser demonstrates using the
HAAS to ascend quickly. Check out the sizing, use, and ascent
videos at WesSpur.com.
$93
This neat little ascender system can be added onto one of
our rope kits or used with your own setup. This kit was thought
up by veteran climber Gerry Beranek. In the doubled rope
technique, this system puts a footstrap on the Basic, which is
in turn connected to the rope by a prusik on a custom bungee
lanyard. This bungee advances the ascender as soon as you step
up with your leg that is in the footstrap.
Contents: Bungee, adjustable foot strap, Petzl Basic
ascender, DMM XSRE carabiner.
Check out the setup and ascent video at WesSpur.com.
Regular
Long
83
Hardware
The rollers on this new chest ascender from CAMP of Italy
are a big step up for ascending hardware. Normally, this would
be where the rope could rub against the device. Placing these
rollers here decreases wear and friction, making for a more
efficient ascent. The CAMP Turbo chest is extremely lightweight
at only 3.9 oz, designed to lay flat against the chest, and works
with ropes from 8-13mm (up to 1/2”).
PMI Chest Roller
Roller ASC901
Harness SAD513
Microcender & Macrocender by Petzl
Quick Release Rope Grab by Gibbs
3/8”-1/2” ASC121 $69.95
1/2”-3/4”ASC122 $78.95
SMASC127
$62
LG ASC128 $64
Compact aluminum rope clamp with ribbed cam and spring-tensioned pin for midline
installation. Very compact, light, and moves easily on the rope.
Gibbs quick-release rope grab with steel body, removable locking pin, and ribbed cam. Small
fits fliplines 7/16” to 1/2” lines, large fits 1/2” to 3/4”.
Duck
Tibloc
Emergency Ascender by Kong
Dualcender
Emergency Ascender by Petzl
by Rock Exotica
ASC159 $60
ASC125 $33.95
ASC111 $113
Easy to install with one hand, and works on single ropes
from 8-13 mm (up to 1/2”) and also planar & tubular slings &
webbing from 10 to 15mm.
The Tibloc is a tiny ascender which operates with the use of
a small auto-locking carabiner. Ideal for use as emergency or
rescue ascender. 7/16” max rope size.
Aluminum body and twin, ribbed cams. Reinforced webbing
connection point. Quick-release pin. 1/2” capacity.
The Wraptor
Gas-powered Ascender
ASC156 $2,650
Production tree crews that face long climbs
can not make a better equipment investment
than the Wraptor. The Wraptor will be used
every day, and can allow a crew to operate
more efficiently. Ascending with the Wraptor
saves wear and tear on the body, decreases
fatigue, and increases production by allowing
the climber to reach the working height fresh
and ready to go.
Small tree care companies that work in
big trees, especially on the West Coast, are
passing up a great advantage if they don’t
own a Wraptor. Here in the Pacific Northwest,
where spurless climbing can take you to 130’
or more, a Wraptor is a no-brainer! With
the Wraptor on your crew, it’s easier to get
journeyman-level climbers to climb spurless,
and it’s the ideal way for transitioning oldschool spur climbers to spurless climbing.
Wraptor Rope
150’WR15
$117
200’WR20
$156
300’WR30
$234
600’WR60
$460
BulkWRB$.88
84
Using the Wraptor is simple: use
conventional rope installation method as
you would for an SRT climb, but replace
arduous SRT techniques with this ascender squeeze the throttle and up you go. Progress
is captured by the unit as you ascend, and
backed up with a CMI Ropewalker ascender
on the line. After making your ascent, the
Wraptor can be lowered and the climber
is free to work the tree with the preferred
method of attachment (split tail, etc).
Wraptor unit also has emergency escape
feature, which is explained in the Wraptor
video at WesSpur.com.
• • • • • • • 300 lb. lift capacity
Compact two-stroke motor
Ascension rates up to 100’/min.
Runs 1,000s of feet of rope on 1 tank
Integrated emergency retreat
Built-in fail-safes
Weighs 20 lb.
Wraptor rope is a line designed to run
excellently in the Wraptor. It has an 8,000 lb.
breaking strength, 5% elongation at 10% ABS,
and weighs 9.2 lb per 100’. Wraptor Rope is a
24-Strand polyester jacket with a nylon core.
• • • • • Your box will contain:
Wraptor Unit
CMI Ropewalker
Auto-lock Carabiner
150’ Wraptor Rope
Rope Bag
Petzl Rig
The Petzl Rig is a self-braking descender for professional users.
Unlike the Petzl I’D, the Rig features no anti-panic device.
The Rig can be used as a friction device in SRT climbing in a
RADS setup along with a hand and foot ascender. In this fashion,
the climber is always ready to belay to the ground as soon as the
ascenders are removed.
The compact Rig provides super-smooth descents on single
ropes between 10.5 and 11.5mm in diameter (7/16”). Moving
the handle lets the rope run, allowing rate of descent to be
controlled with the free hand.
I’D S
I’D L
Petzl I’D
ASC206 $255
ASC207 $255
ASC225 $205
The Petzl I’D is a self-braking descender and belay device
for single rope. Moving the handle allows the rope to run, and
the rate of descent is controlled with the free hand. If handle
is released, the cam is engaged and descent stops. Anti-panic
device automatically brakes if the handle is pulled too far.
The I’D is an ideal friction device for RADS systems, for new
climbers, or as a part of an SRT anchor system.
Rope capacity for I’D S: 7/16”. Rope capacity for I’D L: 1/2”.
Petzl Gri Gri 2
ASC215
ISC D4
This Descender from ISC features some unique features for a
handled descender. The handle is aluminum and coated for grip, and
designed to rotate 360°, making it easier to use and switch between
allowing the rope to run and locking the device. Each station in the
rotation is accompanied by a “click” so that you have the audio
feedback in addition to the feel of switching the position. Features an
anti-panic brake if the handle is rotated too far by an inexperienced
user.
5 1/2” x 3 1/4”, weighs 23 oz, and works with ropes from 10.5mm
to 11mm (7/16”).
SMC Micro U-Rack
$99.95
ASC224 $82
The Gri Gri is an extremely popular descender
which uses a handle to control the rate of descent.
When the handle is released, the Gri Gri self-brakes
and engages the cam to halt descent.
The U-rack utilizes Hyper bars, which makes it
easy to add friction or lock off the device. The rack
dissipates heat excellently while still giving the
needed amount of friction for long rappels.
The Gri Gri can be used in conjunction with a
handled rope ascender and foot loop for short
ascents in the sit/stand climbing method.
This rack is designed to run on ropes from
7-12.5mm and has a MBS range of 8 kN to 22 kN
which corresponds with ropes you would use it with.
At 9” x 3” it is the most compact rack from SMC.
Works with ropes with a maximum diameter of
7/16” (11mm).
“This is my favorite
device for long rappels.”
-NGD
Figure 8s
A
B
C
D
A. Standard Aluminum 8
B. SMC Mountaineering 8 C. Aluminum Rescue 8
D. Steel Rescue 8 E. Rock Exotica MiniEight
F. SMC Escape 8
ASC202
ASC221
ASC201
ASC204
ASC214
ASC212
$16.95
$20
$29.95
$39.95
$23.5
$22
Traditional tool for belay or rapelling. SMC mountaineering
8 has squared shape to make it easier to rig and handle when
wearing gloves.
The prongs or “ears” on rescue-style 8s give added options for
adding varying friction and locking off the rope.
E
F
Rock Exotica Mini-eight features side ears that let you easily
vary friction, and is super compact - great for an emergency
descender. Carabiner hole has rubber gasket that fits tightly on a
Rock Exotica or Petzl carabiner. Only 3.6” long!
SMC Escape 8 was designed for firefighters in bailout
situations. This compact aluminum 8 is perfect for your bailout kit. Works on a wide range of ropes up to 12.5 mm (1/2”).
Weighs only 1.7 oz (48 g).
Petzl Pirana
Sterling ATS
ASC208 $38.95
ASC223 $36
Multiple horns for precise variation of friction. Can be
installed on the line without removing it from the harness. The
carabiner hole provides a tight fit for Petzl, or Rock Exotica
carabiners.
Unique descender from Sterling Rope allows multiple friction
settings on rappel as well as auto lock-off belay options.
Incorporates the best parts of a tube or plate device and a figure
8 with ‘hyper-horns’ into one compact tool.
85
Hardware
ASC210 $185
Hybrid SRT Devices
SRT (Single Rope Technique) has
been used for canopy entry in trees
for well over 2 decades. As an access
method, it has its roots in caving and
big wall climbs. For years, arborists
would use different ascension
systems to access canopies in large
trees, particularly in the coastal
rainforest in the US and in Australia.
This often involved switching over to
a rappel system for descent or a DdRT
system to work the canopy.
As systems evolved, we saw the
Yo-Yo/RADS system, the F8 revolver
system, and climbers at tree climbing
comps would use “hybrid” systems in
the Masters Challenge, integrating
their DdRT system as part of their
ascent on a single line, allowing the
individual to work a station on the
way up.
Now we have come to the point
where there are “hybrid” devices.
Theses devices - the Unicender,
Ropewrench, and Hitch Hiker - allow
a climber to seamlessly switch from
ascent to descent. This type of setup
is unique to arboriculture. Both the
Uni and Hitchhiker can work either
single or double rope. When one is
using the Wrench, it is easy to switch
from SRT to DdRT. Climbing systems
are rapidly developing in tree work,
making it easier to improve the
efficiency of your work day.
Give a hybrid device a try!
Hitch Hiker
by RopeTek
Hitch Hiker
Cord Tether
ASC184
ASC184-T
$160
$15
The Hitch Hiker incorporates a steel hybrid device with your
hitch cord to produce a great device for hybrid tree climbing
systems. The Hitch Hiker advances smoothly and engages
instantly when weighted, with easy slack tending, and may be
used in double or single rope systems.
The dog bone the hitch cord runs through slides up behind
your hitch when you advance, taking the weight off your cord
and tending your hitch. When you weight the Hitch Hiker, the
dog bone and carabiner are pressed into the rope for additional
friction. The pressure of the dog bone and carabiner on the
rope takes some of the pressure of your body weight off the
hitch, allowing you to climb on your Friction Hitch in SRT.
The body of the Hitch Hiker is steel, and it should be used
with steel carabiners for maximum wear life and safety. The
weight of the Hitch Hiker is directly on your rope rather than
you.
The Hitch Hiker works smoothly in
both SRT and DdRT, and is especially
handy for working SRT using a hand
ascender to make a redirect for quick
mechanical advantage.
The cord tether for the Hitch Hiker allows the climber to
tend the unit by clipping it to a chest harness.
(Sold separately.)
The Hitch Hiker is sold complete with steel
carabiner and Bee Line hitch cord.
86
Unicender
by Rock Exotica
ASC144 $309
The Unicender can replace friction hitches, figure 8s, and
ascenders! In the doubled rope technique, the Unicender
can be used as a mechanical split tail in place of a friction
hitch. Because of the ease with which it advances in this
configuration, it makes any rope climbing technique easier and
faster. In the single rope technique, the Unicender takes the
place of both ascenders and descender.
When descending, the Unicender can be used in the
“squeeze to go” configuration like a friction hitch - the top and
bottom bar are squeezed together with more pressure for a
quicker descent, or less pressure for a more moderate descent.
In single line, looping a bite of rope over the top bar allows the
climber to control rate of descent by varying the pressure on
the rope - much like descending with a figure 8.
Hardware
This incredible device works by snaking the rope through
the device where smooth wear surfaces apply friction to the
line. The Unicender advances easily and gives utmost control
over the descent. The Unicender can be used with either 7/16”
or 1/2” diameter line without changing any parts, and can be
easily installed midline.
Morgan Thompson invented the Unicender in 2005. It quickly
became very popular for the unprecedented level of control
and smoothness of ascent and descent it allows. Rock Exotica
now manufactures the Unicender, which has been revised and
improved from the original.
Drum Attachment
ASC144-A
$69
This after-market drum attachment invented by
Richard Mumford helps reduce wear on the Unicender
and improve smoothness of descent when installed
properly. Requires mounting with epoxy or rivets,
non-life supporting, may void manufacturer warranty
on the Unicender.
Rope Wrench ZK-2
by ISC
ASC179 $100
The Rope Wrench ZK-2 hybrid device allows climbers to
ascend, descend, and work the tree “Single Rope” with their
favorite friction hitch. While the Rope Wrench ZK-2 is not
for use as your life support device, it places a bend in your
climbing line and takes just enough pressure off your hitch,
allowing you to climb on your friction hitch SRT with ease.
The Rope Wrench ZK-2 has added a pulley to the body of
the Rope Wrench, which allows for easier advancement of the
device when climbing. The Rope Wrench puts just enough of a
bend in your line that you can easily switch from ascending on
your hitch to descending on your friction hitch as you would
if climbing doubled rope. A few fingers pressure on the top of
your climbing hitch and you can descend easily, with the Rope
Wrench following.
The strength of the Rope Wrench for arborist work comes in
how easily it allows you to enter the tree with a foot ascender
or by footlocking for the long climb, then switch to working the
tree as if you were using Doubled Rope but without having to
switch out more gear than your foot ascender.
See the Rope Wrench kit on page 61.
The Rope Wrench is not intended for primary life support.
ZK-2 is much more compact.
Quick-release pin standard in the ZK-2.
Stiffy Tether
10” Tether
12” Tether
ASC180
ASC182
$22
$24
The Stiffy is a semi-rigid tether built to work perfectly with
the ZK-2 Rope Wrench made from doubled Sterling 5/16” cord.
Oceans’ Tether 2.0
Split Tether
ASC179-O
$55
Split tether simplifies your system by allowing you to use one
carabiner to hook both tether & pulley to your harness.
ISC Rope Wrench Pulley
1/2” Pulley
PUL151
$28.5
ISC built this pulley to work with the stiff tethers used with
the Rope Wrench ZK-2. The wide spacing between the swinging
side plates gives plenty of room for various tethers. The Rope
Wrench pulley will work with spliced or hand-tied prusik cords.
87
88
Zigzag
Mechanical Prusik for Arborists by Petzl
ASC181 $275
The Zigzag mechanical prusik for arborists combines all the individual pieces of gear being
used in doubled rope climbing into a single mechanical prusik that operates just like climbing on
a hitch and prusik in DdRT.
Friction is managed by running the climbing line through the linked “zig-zag” pattern of rings.
The top ring is a lever; pushing down on this lever releases pressure in the rings, and the climber
descends - just like using a prusik cord. Release the lever and the Zigzag jams, stopping descent.
The climber has control over the rate of descent through varying the pressure on the Zigzag lever.
The attachment point for the climbing harness on the Zigzag is on a built-in swivel for twistfree ropes while you climb, which also helps make advancing the Zigzag smoother. The Zigzag has
an eye for attaching the end of your climb line directly to the device in doubled rope climbing.
Slack tending the Zigzag is made super-efficient with the built-in, sealed ball-bearing pulley.
The Zigzag accepts ropes from 11.5mm-13mm, so it works on your favorite 7/16” and 1/2”
climb lines.
Rope end attachment hole now
features flexible ring to keep
carabiner positioned correctly,
and increases strength.
Be sure to download the Petzl guide to using the Zigzag and the summary of changes to the
2014 Zigzag under the “Safety & Technical” tab at WesSpur.com, and check out the video tab to
see the new Zigzag in action.
Hardware
Enlarged harness attachment for better positioning.
Learn more about the Zigzag at
www.WesSpur.com/items/asc181.html
Zigzag works best with 2 oval
carabiners (sold separately).
Climbing with Zigzag and Foot
Ascender in DdRT.
Zigzag Climbing Kit
Professional Doubled Rope Technique Positioning System
With Velocity Rope
With Tendril Rope
ASC181KV
ASC181KT
$469
$469
This kit combines the Zigzag with carabiners and spliced climbing line so that you can get a
professional climbing system in one convenient kit. Oval Petzl OK Triact carabiners are ideal for
doubled-rope systems, and Velocity is one of the most popular climbing lines, lightweight with
great handling and durability.
This kit comes stowed in a WesSpur rope bag, which will be a home for your Zigzag system and
keep it ready for instant deployment.
Kit Contains
• • • • • Zigzag (ASC181)
Option 1: 150’ Velocity Hot Rope with Hand-spliced Tight Eye (VH15ST)
Option 2: 150’ Tendril Green Rope with Hand-spliced Tight Eye (TE15ST)
2 x Petzl OK Carabiners (CAR126)
Medium Rope Bag (BAG102)
89
Carabiner sold separately
Lockjack Sport
Spiderjack 2.1
by ART
by ART
ASC116 $334.95
Spiderjack 2.1ASC139
$327.95
Spiderjack w/Dyneema Kit
ASC173 $374.95
An improvement on the popular Lockjack. By allowing slack in the line above to fall through
the device with even less friction, the Spiderjack from ART makes ascents in the doubled rope
technique even easier. In addition, the Spiderjack also allows finer control over friction during
descents, making tasks such as limb-walking even easier by permitting the user to vary friction
more subtly than before. Smooth friction surface works with 7/16” - 1/2” rope. Designed for use
with Petzl Am’D carabiners (page 91). Carabiner sold separately.
Totally replaces the friction hitches used on climbing lines, working both as an ascender and
descender for self-belay in the doubled rope technique (DdRT). With the Lockjack, friction is
applied to the rope with a smooth aluminum surface, which causes less friction while climbing for
an effortless advance and a smoother, more easily controlled descent. Lockjack tends slack by itself
as the weight of rope below the climber pulls the line through the device.
Works with 1/2” rope.
Parts
Repl. Clutch (1/2” lines)
Repl. Clutch (7/16” lines)
Accessories and Parts
Dyneema Strap Kit
ASC174 $58.95
Replacement Clutch 11mm-13mm
ASC162 $19.95
Release LeverASC175
$42.95
ASC135 $19.95
ASC140 $19.95
The lockjack should only be used with D or Oval carabiners of the same
dimensions as the Petzl Am’D. The wooden ball can pass through a larger
carabiner and become stuck, resulting in uncontrolled descent.
PERFORMANCE. ART.
Lockjack
90
|
SPIDERjack
|
PoSITIoNER
|
cLIMBING DEVIcES FRoM a.R.T.
RoPE GUIDE
|
SNakEaNcHoR
|
SNakETaIL
Petzl
William
Double-locking Carabiners
Petzl carabiners are among the finest in the world,
and meet the relevant ANSI and CE standards for tree
care work. Many devices, such as the Zigzag and PIrana,
are designed to work with the shape of the Am’D or
William carabiners.
William
Ball Lock
Triact
CAR103 $19.95
25 kN
Petzl carabiners are guaranteed for 3 years against
any defects in materials or manufacture.
Brk Str
5,625 lb
Height
4.75”
Width
3.25”
Gate
Weight
CAR104 $19.95
25 kN
1” (key)
Brk Str
5,625 lb
Height
4.75”
Width
3.25”
Gate
3.1 oz
Weight
Am’D
Ball-Lock
Triact
Brk Str
6,300 lb
Height
4.25”
Width
2.5”
Gate
Weight
OK
5,400 lb
4.25”
Width
2.5”
Gate
Weight
.75” (key)
2.6 oz
30 kN
.75” (key)
6,750 lb
Height
4.25”
Width
2.5”
Gate
2.6 oz
Weight
6,300 lb
Height
4.25”
Width
2.5”
Weight
.75” (key)
2.6 oz
Vulcan
Steel Triact
CAR130 $27.95
Brk Str
Brk Str
Gate
Steel Triact
CAR126 $23.95
Height
28 kN
Oxan
Triact
Brk Str
CAR102 $18.95
CAR131 $43.95
40 kN
.75” (key)
Brk Str
9,000 lb
Height
4.25
Width
3”
Gate
7.5 oz
Weight
1.2” (key)
10 oz
Petzl Screw-locking Carabiners
Petzl Am’D
23 kN
28 kN
CAR224 $13.95
Petzl William
25 kN
CAR225 $15.95
Brk Str
6,300 lb
Height
4.25”
Brk Str
Height
4.75”
Width
2.5”
Width
3.25”
Gate
.75” (key)
Gate
1” (key)
Weight
2.6 oz
Weight
3.1 oz
Petzl Non-locking Carabiners
Swivel Open
HAR914 $89.95
Gated swivel with large opening for attachment to
a wide range of products (pulleys, lanyards, etc). It
reduces the bulk and weight of component systems
and solves twisting and tangling problems with ropes
and lanyards. Sealed ball bearings offer excellent
performance and reliability.
Petzl Spirit
CAR314 $9.95
Brk Str
5,175 lb
Height
4.33”
Width
2.33”
Weight
Gate
1.37 oz
1” (key)
5,625 lb
Petzl Caritool
SM
LG
CAR901
CAR311
$8.95
$18.95
Lightweight tool holder. Clips
on the inside of the Caritool
help stabilize its position on
the harness. Small hole at the
top for attaching a keeper cord
for critical gear. Durable and
lightweight. Attaches to the
slots in the Sequoia waist belt
or directly onto the webbing of
other harnesses. Not load rated.
91
Hardware
28 kN
3.1 oz
Am’D
CAR101 $18.95
24 kN
1” (key)
Rock Exotica
Rock Exotica carabiners are designed and machined to be the perfect carabiner: sleek, strong,
and with smooth action. Rock Exotica carabiners meet the relevant ANSI standards for tree
care work and are made in the USA. Rock Exotica double-locking carabiners open with a “pulldown” instead of “push-up” gate. Many climbers find that this design makes them easier to open
wearing gloves, one-handed, or while reaching for a clip-in point.
RockO
RockD
Brk Str
29 kN
Height
Width
Weight
Gate
Pirate (HMS)
CAR136 $19
CAR135 $19
CAR134 $18.5
6,525 lb
Brk Str
5,400 lb
Brk Str
5,845 lb
4.5”
Height
4.375”
Height
4.2”
Width
2.5”
Width
2.75”
2.5”
25 kN
Weight
2.85 oz
2.85 oz
Gate
.98” (key)
27 kN
.93” (key)
Wire-Eye RockO
CAR152 $22
RockD Stainless
41 kN
9,217 lb
Brk Str
6,750 lb
Height
4.5”
Height
7.25”
Width
2.5”
Width
2.5”
Weight
Gate
7.68 oz
Weight
1” (key)
SwivaEye
Stainless steel
30 kN
5.9 oz
Gate
1” (key)
CAR138 $78
CAR137 $88
Brk Str
3.09 oz
Gate
Wire-Eye Pirate
CAR150 $22
SwivaBiner
CAR139 $39
Weight
Brk Str
6,750 lb
Height
5.4”
Width
2.3”
Weight
.85” (key)
4.85 oz
Gate
Built-in swivel
No twisted lines!
.85” (key)
Built-in swivel
No twisted lines!
ORCA Lock Carabiners:
For advanced users only!
The ORCA (Open Regular Close Auto) Locking System
deploys with the ease and quickness of a non-locker
and shuts with the security of an autolock. The ORCA
is a unique autolock sleeve/gate that can be set in the
unlocked position. With the gate in the “set” position,
it is ready to function like a non-locker, but the act
of opening the gate “triggers” it, and when the gate
closes, it will autolock just like a regular autolocking
carabiner. Ideal for aerial rescue, complex haul
systems, etc.
29 kN
25 kN
27 kN
These carabiners have the same dimensions as their
double-lock versions above.
RockD ORCA Lock
RockO ORCA Lock
CAR141 $22
CAR142 $22
Locking Mechanisms
Carabiner Dimensions
Carabiners that are to be used for life support
must be “double-locking,” which means
that it requires 3 motions to open the gate.
These are usually: 1 - push sleeve up or down;
2 - twist sleeve; 3 - pull gate inward. Additionally,
a carabiner that is used to support a climber
must have a major axis gate-closed breaking
strength of at least 5,000 lb / 22.24 kN.
(ANSI Z133.1-2012 8.1.10.)
The illustration to the right shows how
carabiners are measured for height, width, and
gate opening.
The double-locking carabiners we sell meet
or exceed the 5,000 lb breaking strength
requirement and relevant guidelines for tree
care.
92
B
Brk Str = Breaking strength.
Height = Length of main axis (A).
Width = Width at widest point (B).
Gate = Width of gate opening (C). Also
whether it is a pin-lock or key-lock gate (keylock are generally less likely to snag rope &
gear).
Pirate ORCA Lock
CAR140 $22
C
A
Rock Exotica Screw-locking Carabiners
RockD
RockO
CAR228 $14
29 kN
CAR229 $14
Brk Str
6,525 lb
Brk Str
5,400 lb
Brk Str
5,845 lb
Height
4.5”
Height
4.375”
Height
4.2”
Width
2.5”
Width
2.5”
Width
2.75”
Weight
Gate
24 kN
2.61 oz
Weight
.98” (key)
Gate
2.61 oz
.93” (key)
RockO
CAR322 $12
Brk Str
6,744 lb
Brk Str
4,945 lb
Height
4.5”
Height
4.375”
Width
2.5”
Width
2.5”
Weight
Gate
2.36 oz
22 kN
1” Bi-Wire
Weight
2.85 oz
Gate
1” (key)
Weight
2.36 oz
Gate
1” (key)
Rock Exotica carabiners have been designed
from the ground up with attention paid to every
detail. One of these details is the angled gate
which opens slightly to the side of the spine for
increased clearance. This also makes it open
more easily in the hand.
Rock Exotica Details
Another detail on Rock Exotica Carabiners is
the attention paid to every edge and surface.
Autolocking sleeves have bevelled edges and
smooth surfaces. This help keep the carabiner
from snagging on ropes and lanyards.
Rock Exotica Screw-lock carabiners have the
unique advantage of anodized parts, and an
enlarged flange at the top, which prevents the
screw-sleeve from ever moving past the end of
the gate, which can happen in other designs with
wear.
Rock Exotica Swivel
Large Eye
Small Eye
Stainless
Nano
HAR901
$61
HAR904
$60
HAR904S
$165
HAR911 $56
36 kN
Rock Exotica’s swivels are the best we’ve ever found, with
super-burly construction and sleek, textile-friendly surfaces.
Every swivel features a high-strength stainless steel axle and
sealed ball bearings for maximum efficiency.
The Large Eye swivel is great for spliced terminations, while
the Small Eye is nice in that it will accommodate a wide range
of carabiners with less movement and bulk.
The Stainless swivel is the perfect all-weather swivel and will
last longer than aluminum when using steel connectors.
The Nano is the most compact, with a lower eye that is just
large enough to fit an RE biner and rubber-grommeted to keep
it in place.
Customer Feedback
“Thank you so much for your excellent customer service. I’m a first time customer and I feel like I was
being treated like a long time customer. I talked to the arborist on hand and then the gentleman who
I ordered my rope from who helped get the best value for what I could afford. It’s great to know there
are still companies out there who make sure their customers are getting what they need and not trying
just to move product. P.S. your catalog is amazing - don’t ever stop printing it and go just to online
shipping.”
“Thank you WesSpur for such an awesome deal, super fast shipping, and excellent customer service. I
ordered a recreational package over the phone and was able to customize it. The rep was very helpful! I
will definitely buy from WesSpur again.”
93
Hardware
RockD Bi-Wire
CAR321 $15.5
26 kN
Rock Exotica Angled Gates
Rock Exotica Non-locking Carabiners
30 kN
Pirate (HMS)
CAR230 $14
DMM
Ultra O
DMM Wales is a manufacturer of top-quality climbing
equipment that is best known for its excellent rock climbing
and mountaineering gear, but has also earned respect for its
innovative contributions to work climbing, such as the Hitch
Climber and Impact Block.
Locksafe
CAR149 $23
25 kN
DMM Carabiners are top-quality.
Brk Str
5,625 lb
Height
4.25”
Width
2.5”
Weight
Gate
2.2 oz
.9” (key)
Ultra O 3-color Pack
CAR149-3PK
Shadow
Sentinel
Locksafe
Locksafe
CAR153 $21.75
24 kN
Brk Str
5,395
Height
3.81”
Width
2.5”
Gate
Weight
$64
CAR151 $23
24 kN
.66” (key)
Brk Str
5,395 lb
Height
4”
Width
2.5”
Gate
2.15 oz
Weight
.7” (key)
2 oz
Shadow 3-color Pack
CAR151-3PK
25 kN
BOA
Aero HMS
Locksafe
Locksafe
CAR110 $23.95
CAR148 $23.95
25 kN
$64
Revolver Auto
Locksafe
CAR127 $46
24 kN
Brk Str
5,625
Brk Str
5,625 lb
Brk Str
5,400 lb
Height
4.75”
Height
4.5”
Height
4”
Width
3.125”
Width
2.7”
Width
2.25”
Gate
Weight
.9” (key)
Gate
3.4 oz
Weight
Gate
.7” (key)
Weight
3.2 oz
1” (key)
2 oz
Built-in pulley
(see next page).
Steel BOA
Steel D
Locksafe
Locksafe
40 kN
CAR125 $32.25
45 kN
Brk Str
10,125 lb
Brk Str
9,000 lb
Brk Str
10,125 lb
Height
4.5”
Height
4.5”
Height
4.5”
Width
3”
Width
3”
Width
3”
Gate
Weight
94
Locksafe
CAR113 $28.5
CAR112 $25.95
45 kN
Steel Eye
.75” (pin)
10 oz
Gate
Weight
.75” (pin)
10 oz
Gate
Weight
.75” (pin)
10 oz
DMM Revolver
Wire Gate
Auto Lock
Screw Lock
Phantom Screw-gate
CAR309 $29.5
CAR127 $46
CAR217 $38
The Revolver is borrowed from rock climbing, where it is
used as a low-friction redirect for the climbing line because of
the built-in pulley. Other uses for tree climbers include making
quick mechanical advantage systems (see picture), and hauling
gear up the tree. Now available with 3 gate options.
Brk Str
5,400 lb
Height
4”
Width
2.25”
Weight
2 oz
Gate
CAR235 $14
Most compact!
24 kN
Brk Str
5,395 lb
Height
3.68”
Width
2.06”
Gate
.63” (key)
Weight
1.48 oz
24 kN
1” (key)
Wire Gate
Mamba Bent Gate
XSRE Mini-biner
CAR306 $16
Thor
CAR318 $10.95
CAR319 $8.75
Brk Str
5,175 lb
Brk Str
899 lb
Brk Str
6,294 lb
Height
4.33”
Height
2.25”
Height
3.81”
Width
2.33”
Width
1.25”
Width
2.18”
Weight
1.6 oz
Weight
.28 oz
Weight
Gate
.75” (pin)
Gate
Hardware
DMM Non-locking Carabiners
75” (key)
Gate
1.27 oz
1” (wire)
Red, blue, purple, green, blue, or orange.
Sold individually.
DMM Axis Swivel
SMHAR912
$76
LGHAR913
$88
Super-sleek swivels from DMM have impressive strength,
smooth operation, and rope-friendly surfaces for a great
rigging swivel. The large openings easily accommodate
multiple attachments. Two sizes to cover all rigging scenarios.
Anodized aluminum body with stainless steel axles and highquality ball bearings.
36 kN
50 kN
Small weighs 4 oz. 36 kN MBS.
Large weighs 6.5 oz. 50 kN MBS.
Fast Rubber Sling Keeper
HAR905 $2
Universal size rubber keeper keeps slings where you want
them on your carabiner.
Stainless Corner Traps
Small HAR902 $3
LargeHAR903
$3
Helps to prevent the ‘biner from slipping into a position
where it may be side-loaded.
Express Sling
ASC178 $6.95
Petzl sewn sling with built-in keeper which keeps the
carabiner firmly in place. 17 cm long, 15 grams. 22 kN.
95
SMC
Double-Locking Carabiners
Seattle Manufacturing Company (SMC) is a U.S. manufacturer of work and rescue equipment that makes every piece of gear to last a lifetime of use. All SMC products are
ISO 9001 certified and built in the USA. SMC ensures that all carabiners are 100% visually and physically inspected. SMC Gear - Quality Gear for Life.
46 kN
ANSI Steel
Crossover
Triguard
Safety Lock
Triple Lock
Stainless Steel
CAR145 $54
40 kN
CAR146 $36
45 kN
CAR129 $40
Brk Str
10,340 lb
Brk Str
8,990 lb
Brk Str
10,125 lb
Height
5”
Height
5.5”
Height
4.5”
Width
3”
Width
3.35”
Width
2.75”
Gate
Weight
1.2” (pin)
Gate
11.5 oz
Weight
• ANSI Z359.1
1” (key)
Gate
5 oz
Weight
• NFPA G-1983
• ANSI Z359.1
Light alloy
carabiner.
.9” (pin)
7 oz
steel
locking
• NFPA G-1983
SMC Screw-Locking Carabiners
Heat-treated
Steel D
65 kN
CAR219 $46
Brk Str
14,625 lb
Stainless Steel
D Carabiner
33 kN
CAR220 $43
Brk Str
7,425 lb
Crossover
CAR223 $32
40 kN
Brk Str
9,000 lb
Height
5.5”
Width
3.35”
Height
5”
Height
4.5”
Width
3”
Width
2.7”
Gate
1” (key)
Weight
5.1 oz
Gate
1.2” (pin)
Gate
.94” (pin)
Weight
10.6 oz
Weight
6 oz
• NFPA G-1983
• NFPA G-1983
• 30% greater strength
SMC Kinetic
SMC XL Steel D
CAR234 $18
28 kN
CAR205 $42
40 kN
Brk Str
6,300 lb
Brk Str
9,000 lb
Height
4.6”
Height
5.75”
Width
2.85”
Width
3.5”
Gate
1” (key)
Gate
1.5” (pin)
Weight
2.8 oz
Weight
13 oz
CT Carabiners
CT stands for “Climbing Technology”, an innovative Italian
manufacturer of climbing gear. The Pillar is a compact oval
shape that works great with the Hitch Hiker and other gear.
Made in Italy.
Pillar
30 kN
• NFPA G-1983
Brk Str
4,500 lb
Height
3.95”
Width
2.2”
Weight
Gate
96
1.7 oz
.75” (pin)
6,744 lb
Height
4.37
Width
2.44”
Weight
.87” (key)
6.8 oz
SMC Oval
CAR316 $10.5
20 kN
Brk Str
Gate
SMC Non-Locking Carabiners
SMC Light D
Steel Trilock
CAR154 $19
CAR315 $8
20 kN
Brk Str
4,500 lb
Height
4.25”
Width
2.2”
Weight
Gate
2.2 oz
.7” (pin)
Pillar
30 kN
Steel Screw-lock
CAR226 $9.5
Brk Str
6,744 lb
Height
4.75
Width
3.25”
Gate
1” (key)
Weight
6.35 oz
Double-locking
Carabiners
30 kN
50 kN
Compact Steel D
NFPA 3-Stage D
CAR115 $19.95
25 kN
23 kN
Swing-Gate“Jake”
CAR106 $27
CAR105 $23
26 kN
Aluminum HMS
Climb Right D
CAR124 $16
25 kN
Swivel Eye
CAR123 $15.95
Hardware
30 kN
Captive-Eye
CAR111 $29
CAR109 $24
Screw-locking Carabiners
NFPA Steel D
Steel Swing-gate
CAR203 $30
72 kN
‘Five-O’
CAR204 $38
“Jake”
CAR211 $12.5
CAR210 $15
Brk Str
16,200 lb
Brk Str
16,200 lb
Brk Str
5,625 lb
Brk Str
Height
4.9”
Height
4.9”
Height
4.25”
Height
4.5”
Width
2.75”
Width
2.75”
Width
2.69”
Width
3.15”
Gate
1”
Gate
1.4”
Gate
1.4” (pin)
Weight
10 oz
Weight
10 oz
Weight
2.2 oz
72 kN
25 kN
23 kN
5,175 lb
Gate
1”
Weight
3.5 oz
Swing-gate opens
extra wide
Offset D
Kong Carbon Steel Rescue
CAR209 $9.5
24 kN
CAR201 $17.5
Climb Right Large D
Climb Right Small D
CAR207 $14
CAR215 $12
Brk Str
5,400 lb
Brk Str
11,250 lb
Brk Str
5,850 lb
Brk Str
Height
4.1”
Height
4 .75”
Height
4.5”
Height
4”
Width
2.3”
Width
3 .25”
Width
3”
Width
2.5”
Gate
.56” (pin)
Gate
1” (key)
Gate
.875” (key)
Gate
.6” (key)
Weight
2 oz
Weight
9 oz
Weight
3 oz
Weight
4 oz
50 kN
26 kN
24 kN
5,400 lb
Non-locking Carabiners
Kong Micro D
Climb Right Paddle
Kong Paddle
Steel Captive Eye
CAR301 $8
CAR310 $11
CAR308 $15
CAR305 $19.95
Brk Str
1,322 lb
Brk Str
5,175 lb
Brk Str
4,950 lb
Brk Str
5,400 lb
Height
3.25”
Height
4.75”
Height
4.75”
Height
4”
Width
1.75”
Width
3”
Width
3”
Width
2.25”
Weight
1 oz
Weight
Weight
6 oz
Gate
.6” (key)
Gate
3 oz
1.25” (key)
Weight
Gate
3 oz
1.2” (pin)
Gate
.8” (key)
97
CAMP Carabiners
CAMP is an Italian company producing climbing and
mountaineering gear which makes a welcome addition to the
tree climbing world. These carabiners have excellent action,
gate spring strength, and are nice and compact.
24 kN
Compact Oval
Steel Oval
Nano
Double-locking
Screw-locking
Non-locking
CAR155 $19
CAR227 $9.5
25 kN
20 kN
CAR320 $6.5
Brk Str
5,395 lb
Brk Str
5,620 lb
Brk Str
4,496 lb
Height
4”
Height
4.187”
Height
3.375”
Width
2.125”
Width
2.25”
Width
2”
Gate
Weight
.67” (key)
Gate
2.7 oz
.625” (pin)
Weight
Gate
5.8 oz
Weight
.82” (wire)
.8 oz
• Ultra-compact!
A
B
C
D
Aluminum Locking Rope Snaps
A
B
Steel Locking Rope Snaps
98
Snap Style
A. Aluminum Snap - Red
B. Aluminum Snap - Blue
C. Aluminum Snap - Black
D. Wide Alum. Snap - Red
E. Wide Alum. Snap - Black
F. ISC Aluminum Snap
G. ISC Aluminum Swivel Snap
C
E
F
Item #
CAR410
CAR409
CAR412
CAR411
CAR413
CAR415
CAR414
Price
$15
$15
$17
$25
$26
$28.5
$39.75
Brk Str
6,000 lb
6,000 lb
6,000 lb
6,750 lb
6,750 lb
6,070 lb
5,620 lb
Height
6”
6”
6”
5.5”
5.5”
5.5”
7.56”
Width
2.75”
2.75”
2.75”
2.75”
2.75”
2.75”
2.75”
Gate
1”
1”
1”
.87”
.87”
.87”
.875”
Weight
6 oz
6 oz
6 oz
5 oz
5 oz
4 oz
7.5 oz
Gate
.75”
.75”
.75”
.75”
2.5”
Weight
8 oz
10 oz
10 oz
20 oz
22 oz
E
D
Snap Style
A. Short Steel Snap
B. Long Steel Snap
C. Swivel Steel Snap
D. Locking Spreader Snap
E. Ladder Hook
G
Item #
CAR404
CAR402
CAR403
CAR406
CAR407
Price
$11
$14
$27
$60
$46
Brk Str
5,000 lb
5,000 lb
5,000 lb
5,000 lb
8,992 lb
Height
4.5”
5.5”
7”
9.75”
9”
Width
2.75”
2.25”
2.25”
2.5”
4.75”
Stainless Steel Oval Quick Links
Size Item#Price Opening WLL
1/4”HAR112
$3.5
5/16”
1,430 lb
5/16”HAR113
$4.5
3/8”
2,420 lb
3/8”HAR114
$7.5
1/2” 3,960 lb
Higher-strength stainless steel resists corrosion. Made in China.
Stainless Steel Delta Links
3/16”HAR123
$2.25
1/4”
990 lb
1/4”HAR104
$2.5
9/32”
1,430 lb
5/16”HAR105
$3.75
5/16”
2,420 lb
3/8”HAR106
$6.75
3/8”
3,960 lb
Great for attaching foot loops or webbing without twist. China.
Made in France.
Highest-quality steel quick links from Maillon Rapide. Made in
France.
Maillon Rapide Delta Links
1/4”HAR117
$5
5/16”
550 lb
5/16”HAR118
$6
3/8”
1,540 lb
3/8”HAR119
$7
1/2”
2,420 lb
Great for attaching foot loops or webbing without twist. Made in
France.
Maillon Rapide Pear Quick Links
5/16”HAR107
$7
3/4”
1,058 lb
3/8”HAR108
$9
13/16” 1,320 lb
Galvanized steel pear shackles. Made in France.
Brass Swivel Snaps
Wichard Stainless Locking D Shackle
XS 2” (no swivel)
HAR115 $3.5
SM 3”HAR109
$3.5
MD 3.5”
HAR110 $4.5
LG 4.5”
HAR111 $6
5/32”HAR124
$11
5/16”
700 lb
Brass swivel snaps especially useful in slack-tending a split tail
climbing system.
3/16”HAR125
$3.75
7/16”
440 lb
Not load rated.
Stainless Locking D Shackle
Made in China.
Locking Twisted Clevis by Wichard
Pin Size Item#
Price
5/16”HAR220
$22.25
13/32”HAR221
$47
Made in France.
Opening Tensile Str.
5/8”
6,600 lb
3/4”
9,900 lb
Often used to connect to a flipline adjuster, as the twist holds
the adjuster in a horizontal position that is easier to adjust. Must be
securely tightened before use to engage twist-lock. Made in France.
Steel Swivel Shackles
5/16” 5,000 lb HAR208 $15
1/2” 12,000 lb HAR209 $24
Made in China.
Steel Twist Link by CT
Pin Size Item#
Price
5/16”HAR129
$14.5
Opening Tensile Str.
7/10”
6,600 lb
Often used to connect to a flipline adjuster, as the twist holds the
adjuster in a horizontal position that is easier to adjust. Must be
securely tightened before use to engage twist-lock. Made in France.
Galvanized Steel Bow Shackles
Size Item#
Price
1/2”HAR205
$5.5
5/8”HAR206
$8
3/4”HAR207
$11
Opening
Brk Str
7/8”
24,000 lb
1 1/16” 39,000 lb
1 3/16” 57,000 lb
Made in China.
Crosby Galvanized Shackles - U.S.
3/4”HAR213 $36
1 3/8”
13,000 lb
Made in the USA.
Stainless Steel Bow Shackles
Size Item#
Price
5/16”HAR201$8.5
1/2”HAR202
$12.5
5/8”HAR203
$20
3/4”HAR204
$27
Opening
5/8”
1”
1 5/16”
1 1/2”
Brk Str
6,900 lb
15,000 lb
28,000 lb
40,000 lb
Made in China.
99
Hardware
MR Stainless Steel Pear Quick Links
Size Item#Price Material WLL
5/16”HAR127
$9.75
Steel
1,455 lb
3/8”HAR128
$10.75 Steel
1,850 lb
Maillon Rapide Oval Quick Links
1/4”HAR120
$3
5/16”
880 lb
5/16”HAR121
$4.25
3/8”
1,500 lb
3/8”HAR122
$5.5
1/2” 1,980 lb
36 kN
36 kN
DMM XS Bat
30 kN
SMC Mini Rigging Plate
RIG926 $25.5
Petzl Paw (Small)
RIG920 $30
Super-compact rigging plate from DMM
packs a 36 kN strength and 4 rigging holes into
a tiny plate less than 2 1/2” on a side. Weighs
only 1.3 oz!
RIG903 $32.95
36 kN. Meets NFPA, ANSI Z359.
Aluminum plate for equalization of loads.
3.75” x 2 .875” with a 30kN strength. NFPA.
3.75” x 2.93” x .37” thick. Compact and
versatile mini-rigging plate.
Hydra
Low Friction X-Rigging Ring
Small
Large
XL ‘Beast’
RIG930
$31
RIG927
$38
RIG931 $70
This rigging ring from Antal is made of low
friction aluminum, which offers high strength while
remaining incredibly lightweight. Often used in
place of a low friction block and ball bearing. Two
sizes available. Perfect for making high-strength,
retrievable false crotches. Made in Italy.
Triple-Attachment Pulley
PUL149 $89.95
28 kN
Rock Exotica’s new triple-attachment
swivel pulley combines swivel, rigging plate,
and pulley into one great tool. The Hydra
can be used on your rope bridge for a sliding
connection point, which also eliminates rope
twisting, or even as a lanyard adjuster or to
tend your friction hitch (though the swivel
won’t come into play in that setup).
Small: 20mm inside diameter, 50mm outside
diameter, 14mm channel for rope. Weighs 1.6 oz.
7,040 lb WLL (3,200 kg).
The Hydra can be loaded at any of the
three rubber-lined carabiner holes on the
swivel top, and has a maximum rope diameter
of 1/2” (13mm), breaking strength of 28 kN
(6294 lb), and a WLL of 5 kN (1124 lb).
Large: 28mm inside diameter, 70mm outside
diameter, 20mm channel for rope. Weighs 4.23 oz.
14,110 lb WLL (6,400 kg).
XL ‘Beast’: 38mm inside diameter, 98mm outside
diameter, 28mm channel for rope. Weighs 12 oz.
22,046 lb WLL (10,000 kg).
Climbing Rings
Steel and aluminum climbing rings have many uses in climbing, from sliding connection points on your rope bridge harness to custom friction savers or ring prusiks. WesSpur stocks only rated,
marked metal climbing rings. The comparison picture below shows all of our metal climbing rings on a 1/2” grid so you can see the relative sizes of the ring dimensions.
SMC Aluminum Ring
RedCLI915
$5
GreyCLI924
$5
7,200 lb (32 kN). Proof-tested.
1 5/8” outer; 1 1/16” center.
Made in USA.
100
Small Steel Ring
CLI913 $8.5
5,625 lb (25 kN) proof-tested.
2” outer diameter,
1” center
diameter.
Stainless
steel.
Made in China.
Large Steel Ring
Omega Pacific Ring
LargeCLI914
$9
CLI922 $5
5,400 lb (24 kN) proof-tested.
2 1/2” outer diameter, 1 3/4”
inner diameter. Stainless steel.
Made in China.
4,500 lb (20 kN), anodized
aluminum,
weighs
1.2
oz.
Made in the USA.
DMM Anchor Rings
26mmCLI916$17.5
28mmCLI917$17.5
34mmCLI918$17.5
40mmCLI919$17.5
Aluminum. MBS 30 kN / 6,750 lb.
Made in the UK.
Hitch Climber
HC Red
PUL120-R $54
HC Grey/ TitaniumPUL120-G $54
HC Rapide PUL129
$64.5
The DMM Hitch Climber Pulley is the most popular hitchtending pulley on the market. The three anchor holes help
stack your doubled rope and hitch in a very clean, streamlined
fashion, and the high-efficiency pulley helps reduce resistance.
The Hitch Climber has many other uses aside from organizing
your climbing system; it can be used to set up a mechanical
advantage for rescue and gear hauling, and advanced workpositioning systems. See the Hitch Climber’s Guide PDF at
WesSpur.com for more ideas.
The Hitch Climber “Rapide” mounts the sheave on ball
bearings for higher efficiency.
Brk Str
5,400 lb
Max Rope
Height
Width
1/2”
3.75”
2.75”
Weight
3.4 oz
Hardware
Safe Usage Notes
The ‘V-Rig’ uses two anchors (see the
pulleySAVER or thimbleSAVER), and only one
rope and hitch to create a positioning system which
tends to equalize the load between the anchors.
Should only be used with spliced-eye
lines, as there is a risk of a tied knot
interfering with the friction hitch.
Hitch Climber Red and Grey
Hitch Climber
Rapide
Should not be used on the rope
bridge of a harness.
Hitch-tending Pulleys
A quality-manufactured pulley is
the heart of a good DdRT climbing
system. Using a pulley to tend
your hitch frees you up for onehanded slack-tending. A pulley
with multiple anchor holes can
also neaten up your climbing
system and make it more compact,
or open up uses for hauling and
mechanical advantage.
Some climbers install a highefficiency ball-bearing pulley on
the rope bridge of their harness.
Using a pulley on the harness
bridge reduces wear on the bridge
and lets the climber’s tie-in point
traverse the bridge more easily.
(Do not use the Hitch Climber in
this way.)
Using pulleys throughout your
system can improve efficiency.
Petzl Fixe
PUL104 $28.95
CMI Micro
CMI Double Tie-in
CMI Tri Tie
PUL101 $24
PUL105 $37
PUL152 $54
Our most popular pulley for slack-tending. 1
1/4” aluminum sheave.
Popular for use as a rolling connection on
saddle bridges.
Swinging aluminum sideplates, 1.25”
aluminum sheave, bushing, aluminum axle.
Brk Str
7,000 lb
Brk Str
7,000 lb
Brk Str
7,000 lb
Max Rope
Height
Width
Weight
1/2”
2.75”
1.85”
2.4 oz
Max Rope
Height
Width
Weight
1/2”
2.75”
2.75”
3.2 oz
Max Rope
Height
Width
Weight
1/2”
2.75”
3.75
4 oz
CMI Fixed
SMC Crevasse Rescue
PUL123 $29.5
PUL124 $17
Accepts carabiners through holes in side
plate or along the same axis as the sheave.
Super lightweight and compact, with great
manufacturing quality. 1.2” nylon sheave.
Petzl Mobile
PUL136 $24.95
Versatile, ultra-compact pulley.
Brk Str
5,175 lb
Brk Str
7,000 lb
Brk Str
4,950 lb
Brk Str
3,375 lb
Max Rope
Height
Width
Weight
1/2”
3”
1.75”
3.2 oz
Max Rope
Height
Width
Weight
1/2”
2.5”
1.75”
3.2 oz
Max Rope
Height
Width
Weight
1/2”
2.625”
1.75”
2 oz
Max Rope
Height
Width
Weight
1/2”
2.625”
1.75”
2.65 oz
101
CLI909 $59
Green Laser Pointer
Puts out an amazingly bright beam that can be seen in broad daylight! Easily mark limbs or
hazards from the ground and save time communicating with climbers or homeowners. (Do NOT
look directly into the beam! It will cause eye damage.) Requires 2 AAA batteries (included).
Wavelength - 532 nm, Output Power - 4.8 ~ 5.0 mW, Operating Lifetime - 2,000 to 3,000 hrs,
Range - 25,000 ft. Class - IIIa, 1 Year Warranty. Storage case included.
ROP907 $49
Sidekick Rope Retrieval Tool
The Sidekick Rope Retrieval device is a handy tool designed to help advance the climbing line
beyond the climber’s reach. This device is constructed from lightweight plastic and aluminum.
It collapses to just over 2 feet and extends to 9 feet. A way to save time and frustration when
you are in the tree.
ROP924 $24.95
Stein Mini-Reach
The Mini-Reach retriever is a super-compact, lightweight rope retrieval device which adds over
3 feet (1 meter) to your reach, yet folds up to only 7 inches, and weighs only 3.2 ounces. Easily
hooks to your saddle with attached tool carabiner (not load-rated) for extended reach when you
need aid in retrieving or setting lines.
Warning: DO NOT operate or carry this device near electrical power lines as it conducts
electricity. Contact with power lines may result in injury or death.
Daisy Chain
Chain Reactor
High Density Roller
54”CLI921
$24
CLI925 $32
SAD904 $9
Durable nylon webbing with heavy-duty stitching to form
multiple attachment loops. Great for racking your gear or for
use as an adjustable tether for SRT climbing. Sold individually.
The replacement for the traditional sewn daisy chains. It’s
perfect for repositioning, using as a foot stirrup, or for use in
anchor systems.
High density plastic roller is used on with the Petzl William
carabiner to create an almost frictionless attachment point
on the Versatile or Deluxe Versatile saddle. Carabiner clips
through roller and then rolls along bridge.
CLI912 $229
Compact Grapple
These high-quality grappling hooks are designed to facilitate traverses between tree tops, but
are not intended for setting climbing lines.
Not for lifeline use.
102
CLI923 $38
Yella Grapnel
This compact little Grapnel weighs only 5 oz, and is excellent for use in setting redirects and
traverses. Only 4” long, so carrying it on your harness for when you need it is no problem. Attach
a length of throwline and you are good to go!
Not for lifeline use.
Visual Tree Assessment
VTA stands for “Visual Tree Assessment”. This is a process that we go
through to determine the condition of a tree and determine our course
of action regarding climbing, pruning and or removal. We take a look
at several factors beginning as we walk up to the tree, looking at the
base, moving up the trunk, looking at branch structure, needles/leaves,
etc. We can determine quite a bit through this quick overview. On the
following spread are some basics to take into consideration.
This is not training and is no substitute for the training, knowledge,
and experience needed to work safely.
Foliage Discoloration
Unseasonal
discoloration
indicate dead or dying limbs.
may
Utility Lines
Co-dominant Stems
Often weaker, and may have included bark or be
poorly attached and prone to failure.
• • • • Only certified line
clearance workers
should attempt tree
work near utility
lines.
Remember
Minimum Approach
Distances.
Suggested Reading
Photo Guide to Evaluating Hazard trees, ISA
Evaluating Tree Defects, Hayes
Manual of Wood Decays, Mattheck
Stupsi Explains the Tree, Mattheck
Hangers
Branches hanging in
the canopy may be easily
dislodged.
A selection of simple tools can
aid your pre-climb inspection.
Lean
Tools
Animal Habitation
Signs of animal habitation in the
tree may include scat, tracks, etc.
Raccoons, birds, and insects may
all be present. Animals living in the
tree may be a sign of compromised
structure.
Bark Condition
Binoculars - inspect possible tie-in points,
look for hangers, hazards.
Stripped bark, cracks, weeping,
bulges, all may indicated maladies
that have damaged the tree.
Obstacles
Mallet - sound trunks for cavities.
Fruiting Bodies
Trowel - excavate soil to inspect roots.
Bird baths, outbuildings, fences,
etc.,
may
all
present obstacles
for tree work.
Fungal bodies on the trunk or roots
may indicate rot beneath the surface.
Screwdriver - a long screwdriver (10-12”)
is useful for checking the extent of rot.
Throwline - use for pull-tests.
Root & Soil Conditions
Poor rooting, elevated soil level, change in grade, weeping, lack of root
crown, and girdled roots may all indicate weakness at the base of the tree.
103

66 66 Climbing Harness Selection Guidelines

Transcription

Similar documents

Trip to Chudleigh`s Farm

Untitled - Superwinch

Tied up Buck This past weekend I took my grandson

Dynamic Fatigue of High Performance Synthetic Ropes

Neon Lights Map V7

gemtor harness positioning loops

The Big Obstacle_Flyer_2016

FAST flyer.FH10

Hanging Around - test page for upropes