Programming LG STB for Mediatune Table of Contents

Transcription

Programming LG STB for Mediatune
Table of Contents
Before you start……………………………………………………………………………………………………………....
2
Create a TLX programming file on a USB drive with the FTG File Manager………………………
3
Programming the STB 2000………………………………………………………………………………………………
13
Troubleshooting…………………………………….………………………………………………………………………..
16
Technicolor Connected Home USA LLC
Phone (855) 297-5820
www.technicolor.com/mcs
1
Before you start:
Familiarize yourself with the following LG documents and software available from LG’s web site:


http://www.lgsolutions.com/ftgsoftware/index.php?mode=2
o LG FTG File Manager v1.2.5
o Free-to-Guest (FTG) File Manage User Guide
http://www.lg.com/us/commercial/interface-control-boxes-and-cards/lg-STB-2000
o LG STB-2000 Commercial Mode Setup Guide
You will need:




PC with STB Commercial Mode Setup Guide loaded and a USB port
USB thumb drive freshly formatted with FAT format
A LG TV remote control (not included with the STB 2000)
A IR receiver (not included with STB2000)
Phone (855) 297-5820
2
Create a TLX programming file on a USB drive with the FTG File
Manager:
Please review the STB-2000 Commercial Mode Setup Guide from LG before proceeding.
Step One:
Load the FTG File Manager Software on your PC and open the program.
Step Two:
Under Installer Menu Templates select STB-2000 from the drop down menu Click Load.
Phone (855) 297-5820
3
Step Three
Create Channel Map
From the Configure tab select FTG Channel Map
Click on Edit/Add Map
Phone (855) 297-5820
4
Select:

Logical Channel (optional)

RF Channel Major and
Minor

Channel Label
This could be the actual TV
location (TV1, West Wall 2
etc.)

Check Encrypted and OSD
under Attributes
Click on Update
In this example we have mapped channel 100 to RF channel 33-1 as a Pro: Idiom encrypted
channel. Channel label is mt100.
Click on Exit
Step Four
Phone (855) 297-5820
5
Program STB user settings
From the Configure tab select FTG Installer Menu
Click the User tab
In the User tab set / verify the following parameters:
#1
Power Management
Off
Phone (855) 297-5820
6
#2
#11
#15
#16
#17
#20
#21
#84
#90
AC On
Key Defeat
Sleep Timer
On/Off Timer
Alarm
IR Control
V-Chip
V-Chip Permanent
Key Lock
TV always on
Enabled
Disabled
Disabled
Disabled
Multi code 1
Disabled
Disabled
Enabled
Phone (855) 297-5820
7
Select Tuning tab and set / verify the following parameters:
#3
#4
Tuning Band
Start Channel
#104 Start CH Digital
Minor
#5 Channel Lock
#28 Channel Override
#73 Channel N/A
CATV
Set to Major RF channel you programmed in the
Channel Map Editor
Set to minor RF channel you programmed in Channel
Map Editor
Enabled
Enabled
Disabled
Phone (855) 297-5820
8
Select Audio Tab and set / verify the following parameters:
#7
#8
#9
#49
#88
#94
#97
Start Volume
Minimum Volume
Maximum Volume
TV Audio Mode
Noise Mute
SAP Menu
Audio Output
Customer dependent
TV Speaker (customer option)
Enabled
Enabled
Fixed Line Level
The remaining settings can be left at default.
Phone (855) 297-5820
9
Step Five
Save FTG file
The FTG program will create a directory at Program Files/Zenith/FTG/TLX.
Save .tlx file using consistent naming convention. Example: MT_CH100 or MT_CH33-1
Step Six
Create additional FTG files for each STB 2000.
Each STB2000 on the Mediatune system must have a unique channel lineup. (Remember only
two channels per QAM in Mediatune)
It is not necessary to create installer files each time you create a new TLX file.
Reopen the FTG Channel Map Configuration Utility.
In the TLX File box click Open and select the first file you created from the Zenith/FTG/
TLX Directory
Double clicking on the file will load it into the TLX File Content box.
Phone (855) 297-5820
10
Double click on the IMS information in the TLX File Contents box and it will move the contents to the
FTG Configuration List box. This file is all the Installer Menu Settings previously set up.
Repeat steps 3 and 5 to create a new TLX file with unique channel map for each STB2000
Phone (855) 297-5820
11
Step Seven
Copy TLX files from directory to a USB thumb drive freshly formatted for FAT files. (Do not copy the
directory folder, just the files)
Phone (855) 297-5820
12
Programming the STB2000 with a thumb drive:
NOTE: Please review STB 2000 manual before proceeding (detailed instructions start on page 47)
Step One
Connect an IR pennant to the “IR IN” connection on the back of the STB2000.
Press power and menu to verify the remote is working.
You should see a menu come on screen. The red light on the front of the box flashes when a remote
command is received.
Insert the USB thumb drive containing the TLX files into either USB port on the STB 2000
Phone (855) 297-5820
13
Using the LG remote control, navigate the menu to the Option icon. Press the 7 button on the remote 7
times to enter the USB Download Menu
Select Teach to STB (TLX)
Select the file from the Teach to STB (TLX) box to learn to the STB2000.
The file will load on the STB2000 and it will then reset.
Phone (855) 297-5820
14
Label the STB2000 appropriately
Phone (855) 297-5820
15
Troubleshooting
If you encounter problems you can reset the STB 2000 to factory default.
Press the menu button repeatedly until the menu no longer appears
Enter 9876 Exit
Installer menu will appear
Use the navigation keys on the remote to navigate to option 117 FACT Default
Use the right arrow key (>) and the number buttons to enter 413 in the numeric field to the right.
You will be asked for a password enter 0413
Press enter on the remote. The STB2000 will perform an instop reset procedure. The screen background
will go to all snow, press enter again to exit the installer menu. If the STB starts up to an installer Wizard
exit the program.
413
Proceed with programming step two
Phone (855) 297-5820
16

Programming LG STB for Mediatune Table of Contents

Transcription

Similar documents

Printing Setup Instructions: WinXP, Win7 or Win8

Hacking Satellite TV receivers : Are those IoT devices

Credit Suisse - Asian Technology Conference 2014

technicolor life

Firehouse hosts Great Big Home Show

stockmens insurance agency llc

a PDF of this press release

WELCOME TO CAESARS PALACE

BUSHIDO

digital satellite receiver

LifeScapes Highboy Storage Shed

View Full PDF - George Eastman Museum

Oblivion - Technicolor

Herbert Thomas Kalmus was born to privilege on November, 9

worthbluepaper2015

How to complete this Application

1presentation of the group